v4.19.13 snapshot.
diff --git a/drivers/platform/mellanox/mlxreg-hotplug.c b/drivers/platform/mellanox/mlxreg-hotplug.c
new file mode 100644
index 0000000..b6d4455
--- /dev/null
+++ b/drivers/platform/mellanox/mlxreg-hotplug.c
@@ -0,0 +1,692 @@
+/*
+ * Copyright (c) 2016-2018 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016-2018 Vadim Pasternak <vadimp@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_data/mlxreg.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/regmap.h>
+#include <linux/workqueue.h>
+
+/* Offset of event and mask registers from status register. */
+#define MLXREG_HOTPLUG_EVENT_OFF 1
+#define MLXREG_HOTPLUG_MASK_OFF 2
+#define MLXREG_HOTPLUG_AGGR_MASK_OFF 1
+
+/* ASIC good health mask. */
+#define MLXREG_HOTPLUG_GOOD_HEALTH_MASK 0x02
+
+#define MLXREG_HOTPLUG_ATTRS_MAX 24
+#define MLXREG_HOTPLUG_NOT_ASSERT 3
+
+/**
+ * struct mlxreg_hotplug_priv_data - platform private data:
+ * @irq: platform device interrupt number;
+ * @dev: basic device;
+ * @pdev: platform device;
+ * @plat: platform data;
+ * @regmap: register map handle;
+ * @dwork_irq: delayed work template;
+ * @lock: spin lock;
+ * @hwmon: hwmon device;
+ * @mlxreg_hotplug_attr: sysfs attributes array;
+ * @mlxreg_hotplug_dev_attr: sysfs sensor device attribute array;
+ * @group: sysfs attribute group;
+ * @groups: list of sysfs attribute group for hwmon registration;
+ * @cell: location of top aggregation interrupt register;
+ * @mask: top aggregation interrupt common mask;
+ * @aggr_cache: last value of aggregation register status;
+ * @after_probe: flag indication probing completion;
+ * @not_asserted: number of entries in workqueue with no signal assertion;
+ */
+struct mlxreg_hotplug_priv_data {
+ int irq;
+ struct device *dev;
+ struct platform_device *pdev;
+ struct mlxreg_hotplug_platform_data *plat;
+ struct regmap *regmap;
+ struct delayed_work dwork_irq;
+ spinlock_t lock; /* sync with interrupt */
+ struct device *hwmon;
+ struct attribute *mlxreg_hotplug_attr[MLXREG_HOTPLUG_ATTRS_MAX + 1];
+ struct sensor_device_attribute_2
+ mlxreg_hotplug_dev_attr[MLXREG_HOTPLUG_ATTRS_MAX];
+ struct attribute_group group;
+ const struct attribute_group *groups[2];
+ u32 cell;
+ u32 mask;
+ u32 aggr_cache;
+ bool after_probe;
+ u8 not_asserted;
+};
+
+static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv,
+ struct mlxreg_core_data *data)
+{
+ struct mlxreg_core_hotplug_platform_data *pdata;
+
+ /* Notify user by sending hwmon uevent. */
+ kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE);
+
+ /*
+ * Return if adapter number is negative. It could be in case hotplug
+ * event is not associated with hotplug device.
+ */
+ if (data->hpdev.nr < 0)
+ return 0;
+
+ pdata = dev_get_platdata(&priv->pdev->dev);
+ data->hpdev.adapter = i2c_get_adapter(data->hpdev.nr +
+ pdata->shift_nr);
+ if (!data->hpdev.adapter) {
+ dev_err(priv->dev, "Failed to get adapter for bus %d\n",
+ data->hpdev.nr + pdata->shift_nr);
+ return -EFAULT;
+ }
+
+ data->hpdev.client = i2c_new_device(data->hpdev.adapter,
+ data->hpdev.brdinfo);
+ if (!data->hpdev.client) {
+ dev_err(priv->dev, "Failed to create client %s at bus %d at addr 0x%02x\n",
+ data->hpdev.brdinfo->type, data->hpdev.nr +
+ pdata->shift_nr, data->hpdev.brdinfo->addr);
+
+ i2c_put_adapter(data->hpdev.adapter);
+ data->hpdev.adapter = NULL;
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static void
+mlxreg_hotplug_device_destroy(struct mlxreg_hotplug_priv_data *priv,
+ struct mlxreg_core_data *data)
+{
+ /* Notify user by sending hwmon uevent. */
+ kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE);
+
+ if (data->hpdev.client) {
+ i2c_unregister_device(data->hpdev.client);
+ data->hpdev.client = NULL;
+ }
+
+ if (data->hpdev.adapter) {
+ i2c_put_adapter(data->hpdev.adapter);
+ data->hpdev.adapter = NULL;
+ }
+}
+
+static ssize_t mlxreg_hotplug_attr_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(dev);
+ struct mlxreg_core_hotplug_platform_data *pdata;
+ int index = to_sensor_dev_attr_2(attr)->index;
+ int nr = to_sensor_dev_attr_2(attr)->nr;
+ struct mlxreg_core_item *item;
+ struct mlxreg_core_data *data;
+ u32 regval;
+ int ret;
+
+ pdata = dev_get_platdata(&priv->pdev->dev);
+ item = pdata->items + nr;
+ data = item->data + index;
+
+ ret = regmap_read(priv->regmap, data->reg, ®val);
+ if (ret)
+ return ret;
+
+ if (item->health) {
+ regval &= data->mask;
+ } else {
+ /* Bit = 0 : functional if item->inversed is true. */
+ if (item->inversed)
+ regval = !(regval & data->mask);
+ else
+ regval = !!(regval & data->mask);
+ }
+
+ return sprintf(buf, "%u\n", regval);
+}
+
+#define PRIV_ATTR(i) priv->mlxreg_hotplug_attr[i]
+#define PRIV_DEV_ATTR(i) priv->mlxreg_hotplug_dev_attr[i]
+
+static int mlxreg_hotplug_attr_init(struct mlxreg_hotplug_priv_data *priv)
+{
+ struct mlxreg_core_hotplug_platform_data *pdata;
+ struct mlxreg_core_item *item;
+ struct mlxreg_core_data *data;
+ int num_attrs = 0, id = 0, i, j;
+
+ pdata = dev_get_platdata(&priv->pdev->dev);
+ item = pdata->items;
+
+ /* Go over all kinds of items - psu, pwr, fan. */
+ for (i = 0; i < pdata->counter; i++, item++) {
+ num_attrs += item->count;
+ data = item->data;
+ /* Go over all units within the item. */
+ for (j = 0; j < item->count; j++, data++, id++) {
+ PRIV_ATTR(id) = &PRIV_DEV_ATTR(id).dev_attr.attr;
+ PRIV_ATTR(id)->name = devm_kasprintf(&priv->pdev->dev,
+ GFP_KERNEL,
+ data->label);
+
+ if (!PRIV_ATTR(id)->name) {
+ dev_err(priv->dev, "Memory allocation failed for attr %d.\n",
+ id);
+ return -ENOMEM;
+ }
+
+ PRIV_DEV_ATTR(id).dev_attr.attr.name =
+ PRIV_ATTR(id)->name;
+ PRIV_DEV_ATTR(id).dev_attr.attr.mode = 0444;
+ PRIV_DEV_ATTR(id).dev_attr.show =
+ mlxreg_hotplug_attr_show;
+ PRIV_DEV_ATTR(id).nr = i;
+ PRIV_DEV_ATTR(id).index = j;
+ sysfs_attr_init(&PRIV_DEV_ATTR(id).dev_attr.attr);
+ }
+ }
+
+ priv->group.attrs = devm_kcalloc(&priv->pdev->dev,
+ num_attrs,
+ sizeof(struct attribute *),
+ GFP_KERNEL);
+ if (!priv->group.attrs)
+ return -ENOMEM;
+
+ priv->group.attrs = priv->mlxreg_hotplug_attr;
+ priv->groups[0] = &priv->group;
+ priv->groups[1] = NULL;
+
+ return 0;
+}
+
+static void
+mlxreg_hotplug_work_helper(struct mlxreg_hotplug_priv_data *priv,
+ struct mlxreg_core_item *item)
+{
+ struct mlxreg_core_data *data;
+ u32 asserted, regval, bit;
+ int ret;
+
+ /*
+ * Validate if item related to received signal type is valid.
+ * It should never happen, excepted the situation when some
+ * piece of hardware is broken. In such situation just produce
+ * error message and return. Caller must continue to handle the
+ * signals from other devices if any.
+ */
+ if (unlikely(!item)) {
+ dev_err(priv->dev, "False signal: at offset:mask 0x%02x:0x%02x.\n",
+ item->reg, item->mask);
+
+ return;
+ }
+
+ /* Mask event. */
+ ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF,
+ 0);
+ if (ret)
+ goto out;
+
+ /* Read status. */
+ ret = regmap_read(priv->regmap, item->reg, ®val);
+ if (ret)
+ goto out;
+
+ /* Set asserted bits and save last status. */
+ regval &= item->mask;
+ asserted = item->cache ^ regval;
+ item->cache = regval;
+
+ for_each_set_bit(bit, (unsigned long *)&asserted, 8) {
+ data = item->data + bit;
+ if (regval & BIT(bit)) {
+ if (item->inversed)
+ mlxreg_hotplug_device_destroy(priv, data);
+ else
+ mlxreg_hotplug_device_create(priv, data);
+ } else {
+ if (item->inversed)
+ mlxreg_hotplug_device_create(priv, data);
+ else
+ mlxreg_hotplug_device_destroy(priv, data);
+ }
+ }
+
+ /* Acknowledge event. */
+ ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_EVENT_OFF,
+ 0);
+ if (ret)
+ goto out;
+
+ /* Unmask event. */
+ ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF,
+ item->mask);
+
+ out:
+ if (ret)
+ dev_err(priv->dev, "Failed to complete workqueue.\n");
+}
+
+static void
+mlxreg_hotplug_health_work_helper(struct mlxreg_hotplug_priv_data *priv,
+ struct mlxreg_core_item *item)
+{
+ struct mlxreg_core_data *data = item->data;
+ u32 regval;
+ int i, ret = 0;
+
+ for (i = 0; i < item->count; i++, data++) {
+ /* Mask event. */
+ ret = regmap_write(priv->regmap, data->reg +
+ MLXREG_HOTPLUG_MASK_OFF, 0);
+ if (ret)
+ goto out;
+
+ /* Read status. */
+ ret = regmap_read(priv->regmap, data->reg, ®val);
+ if (ret)
+ goto out;
+
+ regval &= data->mask;
+
+ if (item->cache == regval)
+ goto ack_event;
+
+ /*
+ * ASIC health indication is provided through two bits. Bits
+ * value 0x2 indicates that ASIC reached the good health, value
+ * 0x0 indicates ASIC the bad health or dormant state and value
+ * 0x3 indicates the booting state. During ASIC reset it should
+ * pass the following states: dormant -> booting -> good.
+ */
+ if (regval == MLXREG_HOTPLUG_GOOD_HEALTH_MASK) {
+ if (!data->attached) {
+ /*
+ * ASIC is in steady state. Connect associated
+ * device, if configured.
+ */
+ mlxreg_hotplug_device_create(priv, data);
+ data->attached = true;
+ }
+ } else {
+ if (data->attached) {
+ /*
+ * ASIC health is failed after ASIC has been
+ * in steady state. Disconnect associated
+ * device, if it has been connected.
+ */
+ mlxreg_hotplug_device_destroy(priv, data);
+ data->attached = false;
+ data->health_cntr = 0;
+ }
+ }
+ item->cache = regval;
+ack_event:
+ /* Acknowledge event. */
+ ret = regmap_write(priv->regmap, data->reg +
+ MLXREG_HOTPLUG_EVENT_OFF, 0);
+ if (ret)
+ goto out;
+
+ /* Unmask event. */
+ ret = regmap_write(priv->regmap, data->reg +
+ MLXREG_HOTPLUG_MASK_OFF, data->mask);
+ if (ret)
+ goto out;
+ }
+
+ out:
+ if (ret)
+ dev_err(priv->dev, "Failed to complete workqueue.\n");
+}
+
+/*
+ * mlxreg_hotplug_work_handler - performs traversing of device interrupt
+ * registers according to the below hierarchy schema:
+ *
+ * Aggregation registers (status/mask)
+ * PSU registers: *---*
+ * *-----------------* | |
+ * |status/event/mask|-----> | * |
+ * *-----------------* | |
+ * Power registers: | |
+ * *-----------------* | |
+ * |status/event/mask|-----> | * |
+ * *-----------------* | |
+ * FAN registers: | |--> CPU
+ * *-----------------* | |
+ * |status/event/mask|-----> | * |
+ * *-----------------* | |
+ * ASIC registers: | |
+ * *-----------------* | |
+ * |status/event/mask|-----> | * |
+ * *-----------------* | |
+ * *---*
+ *
+ * In case some system changed are detected: FAN in/out, PSU in/out, power
+ * cable attached/detached, ASIC health good/bad, relevant device is created
+ * or destroyed.
+ */
+static void mlxreg_hotplug_work_handler(struct work_struct *work)
+{
+ struct mlxreg_core_hotplug_platform_data *pdata;
+ struct mlxreg_hotplug_priv_data *priv;
+ struct mlxreg_core_item *item;
+ u32 regval, aggr_asserted;
+ unsigned long flags;
+ int i, ret;
+
+ priv = container_of(work, struct mlxreg_hotplug_priv_data,
+ dwork_irq.work);
+ pdata = dev_get_platdata(&priv->pdev->dev);
+ item = pdata->items;
+
+ /* Mask aggregation event. */
+ ret = regmap_write(priv->regmap, pdata->cell +
+ MLXREG_HOTPLUG_AGGR_MASK_OFF, 0);
+ if (ret < 0)
+ goto out;
+
+ /* Read aggregation status. */
+ ret = regmap_read(priv->regmap, pdata->cell, ®val);
+ if (ret)
+ goto out;
+
+ regval &= pdata->mask;
+ aggr_asserted = priv->aggr_cache ^ regval;
+ priv->aggr_cache = regval;
+
+ /*
+ * Handler is invoked, but no assertion is detected at top aggregation
+ * status level. Set aggr_asserted to mask value to allow handler extra
+ * run over all relevant signals to recover any missed signal.
+ */
+ if (priv->not_asserted == MLXREG_HOTPLUG_NOT_ASSERT) {
+ priv->not_asserted = 0;
+ aggr_asserted = pdata->mask;
+ }
+ if (!aggr_asserted)
+ goto unmask_event;
+
+ /* Handle topology and health configuration changes. */
+ for (i = 0; i < pdata->counter; i++, item++) {
+ if (aggr_asserted & item->aggr_mask) {
+ if (item->health)
+ mlxreg_hotplug_health_work_helper(priv, item);
+ else
+ mlxreg_hotplug_work_helper(priv, item);
+ }
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /*
+ * It is possible, that some signals have been inserted, while
+ * interrupt has been masked by mlxreg_hotplug_work_handler. In this
+ * case such signals will be missed. In order to handle these signals
+ * delayed work is canceled and work task re-scheduled for immediate
+ * execution. It allows to handle missed signals, if any. In other case
+ * work handler just validates that no new signals have been received
+ * during masking.
+ */
+ cancel_delayed_work(&priv->dwork_irq);
+ schedule_delayed_work(&priv->dwork_irq, 0);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return;
+
+unmask_event:
+ priv->not_asserted++;
+ /* Unmask aggregation event (no need acknowledge). */
+ ret = regmap_write(priv->regmap, pdata->cell +
+ MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask);
+
+ out:
+ if (ret)
+ dev_err(priv->dev, "Failed to complete workqueue.\n");
+}
+
+static int mlxreg_hotplug_set_irq(struct mlxreg_hotplug_priv_data *priv)
+{
+ struct mlxreg_core_hotplug_platform_data *pdata;
+ struct mlxreg_core_item *item;
+ int i, ret;
+
+ pdata = dev_get_platdata(&priv->pdev->dev);
+ item = pdata->items;
+
+ for (i = 0; i < pdata->counter; i++, item++) {
+ /* Clear group presense event. */
+ ret = regmap_write(priv->regmap, item->reg +
+ MLXREG_HOTPLUG_EVENT_OFF, 0);
+ if (ret)
+ goto out;
+
+ /* Set group initial status as mask and unmask group event. */
+ if (item->inversed) {
+ item->cache = item->mask;
+ ret = regmap_write(priv->regmap, item->reg +
+ MLXREG_HOTPLUG_MASK_OFF,
+ item->mask);
+ if (ret)
+ goto out;
+ }
+ }
+
+ /* Keep aggregation initial status as zero and unmask events. */
+ ret = regmap_write(priv->regmap, pdata->cell +
+ MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask);
+ if (ret)
+ goto out;
+
+ /* Keep low aggregation initial status as zero and unmask events. */
+ if (pdata->cell_low) {
+ ret = regmap_write(priv->regmap, pdata->cell_low +
+ MLXREG_HOTPLUG_AGGR_MASK_OFF,
+ pdata->mask_low);
+ if (ret)
+ goto out;
+ }
+
+ /* Invoke work handler for initializing hot plug devices setting. */
+ mlxreg_hotplug_work_handler(&priv->dwork_irq.work);
+
+ out:
+ if (ret)
+ dev_err(priv->dev, "Failed to set interrupts.\n");
+ enable_irq(priv->irq);
+ return ret;
+}
+
+static void mlxreg_hotplug_unset_irq(struct mlxreg_hotplug_priv_data *priv)
+{
+ struct mlxreg_core_hotplug_platform_data *pdata;
+ struct mlxreg_core_item *item;
+ struct mlxreg_core_data *data;
+ int count, i, j;
+
+ pdata = dev_get_platdata(&priv->pdev->dev);
+ item = pdata->items;
+ disable_irq(priv->irq);
+ cancel_delayed_work_sync(&priv->dwork_irq);
+
+ /* Mask low aggregation event, if defined. */
+ if (pdata->cell_low)
+ regmap_write(priv->regmap, pdata->cell_low +
+ MLXREG_HOTPLUG_AGGR_MASK_OFF, 0);
+
+ /* Mask aggregation event. */
+ regmap_write(priv->regmap, pdata->cell + MLXREG_HOTPLUG_AGGR_MASK_OFF,
+ 0);
+
+ /* Clear topology configurations. */
+ for (i = 0; i < pdata->counter; i++, item++) {
+ data = item->data;
+ /* Mask group presense event. */
+ regmap_write(priv->regmap, data->reg + MLXREG_HOTPLUG_MASK_OFF,
+ 0);
+ /* Clear group presense event. */
+ regmap_write(priv->regmap, data->reg +
+ MLXREG_HOTPLUG_EVENT_OFF, 0);
+
+ /* Remove all the attached devices in group. */
+ count = item->count;
+ for (j = 0; j < count; j++, data++)
+ mlxreg_hotplug_device_destroy(priv, data);
+ }
+}
+
+static irqreturn_t mlxreg_hotplug_irq_handler(int irq, void *dev)
+{
+ struct mlxreg_hotplug_priv_data *priv;
+
+ priv = (struct mlxreg_hotplug_priv_data *)dev;
+
+ /* Schedule work task for immediate execution.*/
+ schedule_delayed_work(&priv->dwork_irq, 0);
+
+ return IRQ_HANDLED;
+}
+
+static int mlxreg_hotplug_probe(struct platform_device *pdev)
+{
+ struct mlxreg_core_hotplug_platform_data *pdata;
+ struct mlxreg_hotplug_priv_data *priv;
+ struct i2c_adapter *deferred_adap;
+ int err;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "Failed to get platform data.\n");
+ return -EINVAL;
+ }
+
+ /* Defer probing if the necessary adapter is not configured yet. */
+ deferred_adap = i2c_get_adapter(pdata->deferred_nr);
+ if (!deferred_adap)
+ return -EPROBE_DEFER;
+ i2c_put_adapter(deferred_adap);
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ if (pdata->irq) {
+ priv->irq = pdata->irq;
+ } else {
+ priv->irq = platform_get_irq(pdev, 0);
+ if (priv->irq < 0) {
+ dev_err(&pdev->dev, "Failed to get platform irq: %d\n",
+ priv->irq);
+ return priv->irq;
+ }
+ }
+
+ priv->regmap = pdata->regmap;
+ priv->dev = pdev->dev.parent;
+ priv->pdev = pdev;
+
+ err = devm_request_irq(&pdev->dev, priv->irq,
+ mlxreg_hotplug_irq_handler, IRQF_TRIGGER_FALLING
+ | IRQF_SHARED, "mlxreg-hotplug", priv);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to request irq: %d\n", err);
+ return err;
+ }
+
+ disable_irq(priv->irq);
+ spin_lock_init(&priv->lock);
+ INIT_DELAYED_WORK(&priv->dwork_irq, mlxreg_hotplug_work_handler);
+ dev_set_drvdata(&pdev->dev, priv);
+
+ err = mlxreg_hotplug_attr_init(priv);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to allocate attributes: %d\n",
+ err);
+ return err;
+ }
+
+ priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev,
+ "mlxreg_hotplug", priv, priv->groups);
+ if (IS_ERR(priv->hwmon)) {
+ dev_err(&pdev->dev, "Failed to register hwmon device %ld\n",
+ PTR_ERR(priv->hwmon));
+ return PTR_ERR(priv->hwmon);
+ }
+
+ /* Perform initial interrupts setup. */
+ mlxreg_hotplug_set_irq(priv);
+ priv->after_probe = true;
+
+ return 0;
+}
+
+static int mlxreg_hotplug_remove(struct platform_device *pdev)
+{
+ struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(&pdev->dev);
+
+ /* Clean interrupts setup. */
+ mlxreg_hotplug_unset_irq(priv);
+
+ return 0;
+}
+
+static struct platform_driver mlxreg_hotplug_driver = {
+ .driver = {
+ .name = "mlxreg-hotplug",
+ },
+ .probe = mlxreg_hotplug_probe,
+ .remove = mlxreg_hotplug_remove,
+};
+
+module_platform_driver(mlxreg_hotplug_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
+MODULE_DESCRIPTION("Mellanox regmap hotplug platform driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("platform:mlxreg-hotplug");