v4.19.13 snapshot.
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
new file mode 100644
index 0000000..3160e93
--- /dev/null
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -0,0 +1,1539 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright (C) 2015 Broadcom Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/msi.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/mbus.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/arm-gic-v3.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+
+#include "pcie-iproc.h"
+
+#define EP_PERST_SOURCE_SELECT_SHIFT 2
+#define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT)
+#define EP_MODE_SURVIVE_PERST_SHIFT 1
+#define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT)
+#define RC_PCIE_RST_OUTPUT_SHIFT 0
+#define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT)
+#define PAXC_RESET_MASK 0x7f
+
+#define GIC_V3_CFG_SHIFT 0
+#define GIC_V3_CFG BIT(GIC_V3_CFG_SHIFT)
+
+#define MSI_ENABLE_CFG_SHIFT 0
+#define MSI_ENABLE_CFG BIT(MSI_ENABLE_CFG_SHIFT)
+
+#define CFG_IND_ADDR_MASK 0x00001ffc
+
+#define CFG_ADDR_BUS_NUM_SHIFT 20
+#define CFG_ADDR_BUS_NUM_MASK 0x0ff00000
+#define CFG_ADDR_DEV_NUM_SHIFT 15
+#define CFG_ADDR_DEV_NUM_MASK 0x000f8000
+#define CFG_ADDR_FUNC_NUM_SHIFT 12
+#define CFG_ADDR_FUNC_NUM_MASK 0x00007000
+#define CFG_ADDR_REG_NUM_SHIFT 2
+#define CFG_ADDR_REG_NUM_MASK 0x00000ffc
+#define CFG_ADDR_CFG_TYPE_SHIFT 0
+#define CFG_ADDR_CFG_TYPE_MASK 0x00000003
+
+#define SYS_RC_INTX_MASK 0xf
+
+#define PCIE_PHYLINKUP_SHIFT 3
+#define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT)
+#define PCIE_DL_ACTIVE_SHIFT 2
+#define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT)
+
+#define APB_ERR_EN_SHIFT 0
+#define APB_ERR_EN BIT(APB_ERR_EN_SHIFT)
+
+#define CFG_RETRY_STATUS 0xffff0001
+#define CFG_RETRY_STATUS_TIMEOUT_US 500000 /* 500 milliseconds */
+
+/* derive the enum index of the outbound/inbound mapping registers */
+#define MAP_REG(base_reg, index) ((base_reg) + (index) * 2)
+
+/*
+ * Maximum number of outbound mapping window sizes that can be supported by any
+ * OARR/OMAP mapping pair
+ */
+#define MAX_NUM_OB_WINDOW_SIZES 4
+
+#define OARR_VALID_SHIFT 0
+#define OARR_VALID BIT(OARR_VALID_SHIFT)
+#define OARR_SIZE_CFG_SHIFT 1
+
+/*
+ * Maximum number of inbound mapping region sizes that can be supported by an
+ * IARR
+ */
+#define MAX_NUM_IB_REGION_SIZES 9
+
+#define IMAP_VALID_SHIFT 0
+#define IMAP_VALID BIT(IMAP_VALID_SHIFT)
+
+#define IPROC_PCI_PM_CAP 0x48
+#define IPROC_PCI_PM_CAP_MASK 0xffff
+#define IPROC_PCI_EXP_CAP 0xac
+
+#define IPROC_PCIE_REG_INVALID 0xffff
+
+/**
+ * iProc PCIe outbound mapping controller specific parameters
+ *
+ * @window_sizes: list of supported outbound mapping window sizes in MB
+ * @nr_sizes: number of supported outbound mapping window sizes
+ */
+struct iproc_pcie_ob_map {
+ resource_size_t window_sizes[MAX_NUM_OB_WINDOW_SIZES];
+ unsigned int nr_sizes;
+};
+
+static const struct iproc_pcie_ob_map paxb_ob_map[] = {
+ {
+ /* OARR0/OMAP0 */
+ .window_sizes = { 128, 256 },
+ .nr_sizes = 2,
+ },
+ {
+ /* OARR1/OMAP1 */
+ .window_sizes = { 128, 256 },
+ .nr_sizes = 2,
+ },
+};
+
+static const struct iproc_pcie_ob_map paxb_v2_ob_map[] = {
+ {
+ /* OARR0/OMAP0 */
+ .window_sizes = { 128, 256 },
+ .nr_sizes = 2,
+ },
+ {
+ /* OARR1/OMAP1 */
+ .window_sizes = { 128, 256 },
+ .nr_sizes = 2,
+ },
+ {
+ /* OARR2/OMAP2 */
+ .window_sizes = { 128, 256, 512, 1024 },
+ .nr_sizes = 4,
+ },
+ {
+ /* OARR3/OMAP3 */
+ .window_sizes = { 128, 256, 512, 1024 },
+ .nr_sizes = 4,
+ },
+};
+
+/**
+ * iProc PCIe inbound mapping type
+ */
+enum iproc_pcie_ib_map_type {
+ /* for DDR memory */
+ IPROC_PCIE_IB_MAP_MEM = 0,
+
+ /* for device I/O memory */
+ IPROC_PCIE_IB_MAP_IO,
+
+ /* invalid or unused */
+ IPROC_PCIE_IB_MAP_INVALID
+};
+
+/**
+ * iProc PCIe inbound mapping controller specific parameters
+ *
+ * @type: inbound mapping region type
+ * @size_unit: inbound mapping region size unit, could be SZ_1K, SZ_1M, or
+ * SZ_1G
+ * @region_sizes: list of supported inbound mapping region sizes in KB, MB, or
+ * GB, depedning on the size unit
+ * @nr_sizes: number of supported inbound mapping region sizes
+ * @nr_windows: number of supported inbound mapping windows for the region
+ * @imap_addr_offset: register offset between the upper and lower 32-bit
+ * IMAP address registers
+ * @imap_window_offset: register offset between each IMAP window
+ */
+struct iproc_pcie_ib_map {
+ enum iproc_pcie_ib_map_type type;
+ unsigned int size_unit;
+ resource_size_t region_sizes[MAX_NUM_IB_REGION_SIZES];
+ unsigned int nr_sizes;
+ unsigned int nr_windows;
+ u16 imap_addr_offset;
+ u16 imap_window_offset;
+};
+
+static const struct iproc_pcie_ib_map paxb_v2_ib_map[] = {
+ {
+ /* IARR0/IMAP0 */
+ .type = IPROC_PCIE_IB_MAP_IO,
+ .size_unit = SZ_1K,
+ .region_sizes = { 32 },
+ .nr_sizes = 1,
+ .nr_windows = 8,
+ .imap_addr_offset = 0x40,
+ .imap_window_offset = 0x4,
+ },
+ {
+ /* IARR1/IMAP1 (currently unused) */
+ .type = IPROC_PCIE_IB_MAP_INVALID,
+ },
+ {
+ /* IARR2/IMAP2 */
+ .type = IPROC_PCIE_IB_MAP_MEM,
+ .size_unit = SZ_1M,
+ .region_sizes = { 64, 128, 256, 512, 1024, 2048, 4096, 8192,
+ 16384 },
+ .nr_sizes = 9,
+ .nr_windows = 1,
+ .imap_addr_offset = 0x4,
+ .imap_window_offset = 0x8,
+ },
+ {
+ /* IARR3/IMAP3 */
+ .type = IPROC_PCIE_IB_MAP_MEM,
+ .size_unit = SZ_1G,
+ .region_sizes = { 1, 2, 4, 8, 16, 32 },
+ .nr_sizes = 6,
+ .nr_windows = 8,
+ .imap_addr_offset = 0x4,
+ .imap_window_offset = 0x8,
+ },
+ {
+ /* IARR4/IMAP4 */
+ .type = IPROC_PCIE_IB_MAP_MEM,
+ .size_unit = SZ_1G,
+ .region_sizes = { 32, 64, 128, 256, 512 },
+ .nr_sizes = 5,
+ .nr_windows = 8,
+ .imap_addr_offset = 0x4,
+ .imap_window_offset = 0x8,
+ },
+};
+
+/*
+ * iProc PCIe host registers
+ */
+enum iproc_pcie_reg {
+ /* clock/reset signal control */
+ IPROC_PCIE_CLK_CTRL = 0,
+
+ /*
+ * To allow MSI to be steered to an external MSI controller (e.g., ARM
+ * GICv3 ITS)
+ */
+ IPROC_PCIE_MSI_GIC_MODE,
+
+ /*
+ * IPROC_PCIE_MSI_BASE_ADDR and IPROC_PCIE_MSI_WINDOW_SIZE define the
+ * window where the MSI posted writes are written, for the writes to be
+ * interpreted as MSI writes.
+ */
+ IPROC_PCIE_MSI_BASE_ADDR,
+ IPROC_PCIE_MSI_WINDOW_SIZE,
+
+ /*
+ * To hold the address of the register where the MSI writes are
+ * programed. When ARM GICv3 ITS is used, this should be programmed
+ * with the address of the GITS_TRANSLATER register.
+ */
+ IPROC_PCIE_MSI_ADDR_LO,
+ IPROC_PCIE_MSI_ADDR_HI,
+
+ /* enable MSI */
+ IPROC_PCIE_MSI_EN_CFG,
+
+ /* allow access to root complex configuration space */
+ IPROC_PCIE_CFG_IND_ADDR,
+ IPROC_PCIE_CFG_IND_DATA,
+
+ /* allow access to device configuration space */
+ IPROC_PCIE_CFG_ADDR,
+ IPROC_PCIE_CFG_DATA,
+
+ /* enable INTx */
+ IPROC_PCIE_INTX_EN,
+
+ /* outbound address mapping */
+ IPROC_PCIE_OARR0,
+ IPROC_PCIE_OMAP0,
+ IPROC_PCIE_OARR1,
+ IPROC_PCIE_OMAP1,
+ IPROC_PCIE_OARR2,
+ IPROC_PCIE_OMAP2,
+ IPROC_PCIE_OARR3,
+ IPROC_PCIE_OMAP3,
+
+ /* inbound address mapping */
+ IPROC_PCIE_IARR0,
+ IPROC_PCIE_IMAP0,
+ IPROC_PCIE_IARR1,
+ IPROC_PCIE_IMAP1,
+ IPROC_PCIE_IARR2,
+ IPROC_PCIE_IMAP2,
+ IPROC_PCIE_IARR3,
+ IPROC_PCIE_IMAP3,
+ IPROC_PCIE_IARR4,
+ IPROC_PCIE_IMAP4,
+
+ /* link status */
+ IPROC_PCIE_LINK_STATUS,
+
+ /* enable APB error for unsupported requests */
+ IPROC_PCIE_APB_ERR_EN,
+
+ /* total number of core registers */
+ IPROC_PCIE_MAX_NUM_REG,
+};
+
+/* iProc PCIe PAXB BCMA registers */
+static const u16 iproc_pcie_reg_paxb_bcma[] = {
+ [IPROC_PCIE_CLK_CTRL] = 0x000,
+ [IPROC_PCIE_CFG_IND_ADDR] = 0x120,
+ [IPROC_PCIE_CFG_IND_DATA] = 0x124,
+ [IPROC_PCIE_CFG_ADDR] = 0x1f8,
+ [IPROC_PCIE_CFG_DATA] = 0x1fc,
+ [IPROC_PCIE_INTX_EN] = 0x330,
+ [IPROC_PCIE_LINK_STATUS] = 0xf0c,
+};
+
+/* iProc PCIe PAXB registers */
+static const u16 iproc_pcie_reg_paxb[] = {
+ [IPROC_PCIE_CLK_CTRL] = 0x000,
+ [IPROC_PCIE_CFG_IND_ADDR] = 0x120,
+ [IPROC_PCIE_CFG_IND_DATA] = 0x124,
+ [IPROC_PCIE_CFG_ADDR] = 0x1f8,
+ [IPROC_PCIE_CFG_DATA] = 0x1fc,
+ [IPROC_PCIE_INTX_EN] = 0x330,
+ [IPROC_PCIE_OARR0] = 0xd20,
+ [IPROC_PCIE_OMAP0] = 0xd40,
+ [IPROC_PCIE_OARR1] = 0xd28,
+ [IPROC_PCIE_OMAP1] = 0xd48,
+ [IPROC_PCIE_LINK_STATUS] = 0xf0c,
+ [IPROC_PCIE_APB_ERR_EN] = 0xf40,
+};
+
+/* iProc PCIe PAXB v2 registers */
+static const u16 iproc_pcie_reg_paxb_v2[] = {
+ [IPROC_PCIE_CLK_CTRL] = 0x000,
+ [IPROC_PCIE_CFG_IND_ADDR] = 0x120,
+ [IPROC_PCIE_CFG_IND_DATA] = 0x124,
+ [IPROC_PCIE_CFG_ADDR] = 0x1f8,
+ [IPROC_PCIE_CFG_DATA] = 0x1fc,
+ [IPROC_PCIE_INTX_EN] = 0x330,
+ [IPROC_PCIE_OARR0] = 0xd20,
+ [IPROC_PCIE_OMAP0] = 0xd40,
+ [IPROC_PCIE_OARR1] = 0xd28,
+ [IPROC_PCIE_OMAP1] = 0xd48,
+ [IPROC_PCIE_OARR2] = 0xd60,
+ [IPROC_PCIE_OMAP2] = 0xd68,
+ [IPROC_PCIE_OARR3] = 0xdf0,
+ [IPROC_PCIE_OMAP3] = 0xdf8,
+ [IPROC_PCIE_IARR0] = 0xd00,
+ [IPROC_PCIE_IMAP0] = 0xc00,
+ [IPROC_PCIE_IARR2] = 0xd10,
+ [IPROC_PCIE_IMAP2] = 0xcc0,
+ [IPROC_PCIE_IARR3] = 0xe00,
+ [IPROC_PCIE_IMAP3] = 0xe08,
+ [IPROC_PCIE_IARR4] = 0xe68,
+ [IPROC_PCIE_IMAP4] = 0xe70,
+ [IPROC_PCIE_LINK_STATUS] = 0xf0c,
+ [IPROC_PCIE_APB_ERR_EN] = 0xf40,
+};
+
+/* iProc PCIe PAXC v1 registers */
+static const u16 iproc_pcie_reg_paxc[] = {
+ [IPROC_PCIE_CLK_CTRL] = 0x000,
+ [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0,
+ [IPROC_PCIE_CFG_IND_DATA] = 0x1f4,
+ [IPROC_PCIE_CFG_ADDR] = 0x1f8,
+ [IPROC_PCIE_CFG_DATA] = 0x1fc,
+};
+
+/* iProc PCIe PAXC v2 registers */
+static const u16 iproc_pcie_reg_paxc_v2[] = {
+ [IPROC_PCIE_MSI_GIC_MODE] = 0x050,
+ [IPROC_PCIE_MSI_BASE_ADDR] = 0x074,
+ [IPROC_PCIE_MSI_WINDOW_SIZE] = 0x078,
+ [IPROC_PCIE_MSI_ADDR_LO] = 0x07c,
+ [IPROC_PCIE_MSI_ADDR_HI] = 0x080,
+ [IPROC_PCIE_MSI_EN_CFG] = 0x09c,
+ [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0,
+ [IPROC_PCIE_CFG_IND_DATA] = 0x1f4,
+ [IPROC_PCIE_CFG_ADDR] = 0x1f8,
+ [IPROC_PCIE_CFG_DATA] = 0x1fc,
+};
+
+/*
+ * List of device IDs of controllers that have corrupted capability list that
+ * require SW fixup
+ */
+static const u16 iproc_pcie_corrupt_cap_did[] = {
+ 0x16cd,
+ 0x16f0,
+ 0xd802,
+ 0xd804
+};
+
+static inline struct iproc_pcie *iproc_data(struct pci_bus *bus)
+{
+ struct iproc_pcie *pcie = bus->sysdata;
+ return pcie;
+}
+
+static inline bool iproc_pcie_reg_is_invalid(u16 reg_offset)
+{
+ return !!(reg_offset == IPROC_PCIE_REG_INVALID);
+}
+
+static inline u16 iproc_pcie_reg_offset(struct iproc_pcie *pcie,
+ enum iproc_pcie_reg reg)
+{
+ return pcie->reg_offsets[reg];
+}
+
+static inline u32 iproc_pcie_read_reg(struct iproc_pcie *pcie,
+ enum iproc_pcie_reg reg)
+{
+ u16 offset = iproc_pcie_reg_offset(pcie, reg);
+
+ if (iproc_pcie_reg_is_invalid(offset))
+ return 0;
+
+ return readl(pcie->base + offset);
+}
+
+static inline void iproc_pcie_write_reg(struct iproc_pcie *pcie,
+ enum iproc_pcie_reg reg, u32 val)
+{
+ u16 offset = iproc_pcie_reg_offset(pcie, reg);
+
+ if (iproc_pcie_reg_is_invalid(offset))
+ return;
+
+ writel(val, pcie->base + offset);
+}
+
+/**
+ * APB error forwarding can be disabled during access of configuration
+ * registers of the endpoint device, to prevent unsupported requests
+ * (typically seen during enumeration with multi-function devices) from
+ * triggering a system exception.
+ */
+static inline void iproc_pcie_apb_err_disable(struct pci_bus *bus,
+ bool disable)
+{
+ struct iproc_pcie *pcie = iproc_data(bus);
+ u32 val;
+
+ if (bus->number && pcie->has_apb_err_disable) {
+ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_APB_ERR_EN);
+ if (disable)
+ val &= ~APB_ERR_EN;
+ else
+ val |= APB_ERR_EN;
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_APB_ERR_EN, val);
+ }
+}
+
+static void __iomem *iproc_pcie_map_ep_cfg_reg(struct iproc_pcie *pcie,
+ unsigned int busno,
+ unsigned int slot,
+ unsigned int fn,
+ int where)
+{
+ u16 offset;
+ u32 val;
+
+ /* EP device access */
+ val = (busno << CFG_ADDR_BUS_NUM_SHIFT) |
+ (slot << CFG_ADDR_DEV_NUM_SHIFT) |
+ (fn << CFG_ADDR_FUNC_NUM_SHIFT) |
+ (where & CFG_ADDR_REG_NUM_MASK) |
+ (1 & CFG_ADDR_CFG_TYPE_MASK);
+
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_ADDR, val);
+ offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_DATA);
+
+ if (iproc_pcie_reg_is_invalid(offset))
+ return NULL;
+
+ return (pcie->base + offset);
+}
+
+static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p)
+{
+ int timeout = CFG_RETRY_STATUS_TIMEOUT_US;
+ unsigned int data;
+
+ /*
+ * As per PCIe spec r3.1, sec 2.3.2, CRS Software Visibility only
+ * affects config reads of the Vendor ID. For config writes or any
+ * other config reads, the Root may automatically reissue the
+ * configuration request again as a new request.
+ *
+ * For config reads, this hardware returns CFG_RETRY_STATUS data
+ * when it receives a CRS completion, regardless of the address of
+ * the read or the CRS Software Visibility Enable bit. As a
+ * partial workaround for this, we retry in software any read that
+ * returns CFG_RETRY_STATUS.
+ *
+ * Note that a non-Vendor ID config register may have a value of
+ * CFG_RETRY_STATUS. If we read that, we can't distinguish it from
+ * a CRS completion, so we will incorrectly retry the read and
+ * eventually return the wrong data (0xffffffff).
+ */
+ data = readl(cfg_data_p);
+ while (data == CFG_RETRY_STATUS && timeout--) {
+ udelay(1);
+ data = readl(cfg_data_p);
+ }
+
+ if (data == CFG_RETRY_STATUS)
+ data = 0xffffffff;
+
+ return data;
+}
+
+static void iproc_pcie_fix_cap(struct iproc_pcie *pcie, int where, u32 *val)
+{
+ u32 i, dev_id;
+
+ switch (where & ~0x3) {
+ case PCI_VENDOR_ID:
+ dev_id = *val >> 16;
+
+ /*
+ * Activate fixup for those controllers that have corrupted
+ * capability list registers
+ */
+ for (i = 0; i < ARRAY_SIZE(iproc_pcie_corrupt_cap_did); i++)
+ if (dev_id == iproc_pcie_corrupt_cap_did[i])
+ pcie->fix_paxc_cap = true;
+ break;
+
+ case IPROC_PCI_PM_CAP:
+ if (pcie->fix_paxc_cap) {
+ /* advertise PM, force next capability to PCIe */
+ *val &= ~IPROC_PCI_PM_CAP_MASK;
+ *val |= IPROC_PCI_EXP_CAP << 8 | PCI_CAP_ID_PM;
+ }
+ break;
+
+ case IPROC_PCI_EXP_CAP:
+ if (pcie->fix_paxc_cap) {
+ /* advertise root port, version 2, terminate here */
+ *val = (PCI_EXP_TYPE_ROOT_PORT << 4 | 2) << 16 |
+ PCI_CAP_ID_EXP;
+ }
+ break;
+
+ case IPROC_PCI_EXP_CAP + PCI_EXP_RTCTL:
+ /* Don't advertise CRS SV support */
+ *val &= ~(PCI_EXP_RTCAP_CRSVIS << 16);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int iproc_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct iproc_pcie *pcie = iproc_data(bus);
+ unsigned int slot = PCI_SLOT(devfn);
+ unsigned int fn = PCI_FUNC(devfn);
+ unsigned int busno = bus->number;
+ void __iomem *cfg_data_p;
+ unsigned int data;
+ int ret;
+
+ /* root complex access */
+ if (busno == 0) {
+ ret = pci_generic_config_read32(bus, devfn, where, size, val);
+ if (ret == PCIBIOS_SUCCESSFUL)
+ iproc_pcie_fix_cap(pcie, where, val);
+
+ return ret;
+ }
+
+ cfg_data_p = iproc_pcie_map_ep_cfg_reg(pcie, busno, slot, fn, where);
+
+ if (!cfg_data_p)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ data = iproc_pcie_cfg_retry(cfg_data_p);
+
+ *val = data;
+ if (size <= 2)
+ *val = (data >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
+
+ /*
+ * For PAXC and PAXCv2, the total number of PFs that one can enumerate
+ * depends on the firmware configuration. Unfortunately, due to an ASIC
+ * bug, unconfigured PFs cannot be properly hidden from the root
+ * complex. As a result, write access to these PFs will cause bus lock
+ * up on the embedded processor
+ *
+ * Since all unconfigured PFs are left with an incorrect, staled device
+ * ID of 0x168e (PCI_DEVICE_ID_NX2_57810), we try to catch those access
+ * early here and reject them all
+ */
+#define DEVICE_ID_MASK 0xffff0000
+#define DEVICE_ID_SHIFT 16
+ if (pcie->rej_unconfig_pf &&
+ (where & CFG_ADDR_REG_NUM_MASK) == PCI_VENDOR_ID)
+ if ((*val & DEVICE_ID_MASK) ==
+ (PCI_DEVICE_ID_NX2_57810 << DEVICE_ID_SHIFT))
+ return PCIBIOS_FUNC_NOT_SUPPORTED;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/**
+ * Note access to the configuration registers are protected at the higher layer
+ * by 'pci_lock' in drivers/pci/access.c
+ */
+static void __iomem *iproc_pcie_map_cfg_bus(struct iproc_pcie *pcie,
+ int busno, unsigned int devfn,
+ int where)
+{
+ unsigned slot = PCI_SLOT(devfn);
+ unsigned fn = PCI_FUNC(devfn);
+ u16 offset;
+
+ /* root complex access */
+ if (busno == 0) {
+ if (slot > 0 || fn > 0)
+ return NULL;
+
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR,
+ where & CFG_IND_ADDR_MASK);
+ offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA);
+ if (iproc_pcie_reg_is_invalid(offset))
+ return NULL;
+ else
+ return (pcie->base + offset);
+ }
+
+ /*
+ * PAXC is connected to an internally emulated EP within the SoC. It
+ * allows only one device.
+ */
+ if (pcie->ep_is_internal)
+ if (slot > 0)
+ return NULL;
+
+ return iproc_pcie_map_ep_cfg_reg(pcie, busno, slot, fn, where);
+}
+
+static void __iomem *iproc_pcie_bus_map_cfg_bus(struct pci_bus *bus,
+ unsigned int devfn,
+ int where)
+{
+ return iproc_pcie_map_cfg_bus(iproc_data(bus), bus->number, devfn,
+ where);
+}
+
+static int iproc_pci_raw_config_read32(struct iproc_pcie *pcie,
+ unsigned int devfn, int where,
+ int size, u32 *val)
+{
+ void __iomem *addr;
+
+ addr = iproc_pcie_map_cfg_bus(pcie, 0, devfn, where & ~0x3);
+ if (!addr) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ *val = readl(addr);
+
+ if (size <= 2)
+ *val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int iproc_pci_raw_config_write32(struct iproc_pcie *pcie,
+ unsigned int devfn, int where,
+ int size, u32 val)
+{
+ void __iomem *addr;
+ u32 mask, tmp;
+
+ addr = iproc_pcie_map_cfg_bus(pcie, 0, devfn, where & ~0x3);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 4) {
+ writel(val, addr);
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8));
+ tmp = readl(addr) & mask;
+ tmp |= val << ((where & 0x3) * 8);
+ writel(tmp, addr);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int iproc_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ int ret;
+ struct iproc_pcie *pcie = iproc_data(bus);
+
+ iproc_pcie_apb_err_disable(bus, true);
+ if (pcie->iproc_cfg_read)
+ ret = iproc_pcie_config_read(bus, devfn, where, size, val);
+ else
+ ret = pci_generic_config_read32(bus, devfn, where, size, val);
+ iproc_pcie_apb_err_disable(bus, false);
+
+ return ret;
+}
+
+static int iproc_pcie_config_write32(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ int ret;
+
+ iproc_pcie_apb_err_disable(bus, true);
+ ret = pci_generic_config_write32(bus, devfn, where, size, val);
+ iproc_pcie_apb_err_disable(bus, false);
+
+ return ret;
+}
+
+static struct pci_ops iproc_pcie_ops = {
+ .map_bus = iproc_pcie_bus_map_cfg_bus,
+ .read = iproc_pcie_config_read32,
+ .write = iproc_pcie_config_write32,
+};
+
+static void iproc_pcie_perst_ctrl(struct iproc_pcie *pcie, bool assert)
+{
+ u32 val;
+
+ /*
+ * PAXC and the internal emulated endpoint device downstream should not
+ * be reset. If firmware has been loaded on the endpoint device at an
+ * earlier boot stage, reset here causes issues.
+ */
+ if (pcie->ep_is_internal)
+ return;
+
+ if (assert) {
+ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
+ val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST &
+ ~RC_PCIE_RST_OUTPUT;
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
+ udelay(250);
+ } else {
+ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
+ val |= RC_PCIE_RST_OUTPUT;
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
+ msleep(100);
+ }
+}
+
+int iproc_pcie_shutdown(struct iproc_pcie *pcie)
+{
+ iproc_pcie_perst_ctrl(pcie, true);
+ msleep(500);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(iproc_pcie_shutdown);
+
+static int iproc_pcie_check_link(struct iproc_pcie *pcie)
+{
+ struct device *dev = pcie->dev;
+ u32 hdr_type, link_ctrl, link_status, class, val;
+ bool link_is_active = false;
+
+ /*
+ * PAXC connects to emulated endpoint devices directly and does not
+ * have a Serdes. Therefore skip the link detection logic here.
+ */
+ if (pcie->ep_is_internal)
+ return 0;
+
+ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_LINK_STATUS);
+ if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) {
+ dev_err(dev, "PHY or data link is INACTIVE!\n");
+ return -ENODEV;
+ }
+
+ /* make sure we are not in EP mode */
+ iproc_pci_raw_config_read32(pcie, 0, PCI_HEADER_TYPE, 1, &hdr_type);
+ if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) {
+ dev_err(dev, "in EP mode, hdr=%#02x\n", hdr_type);
+ return -EFAULT;
+ }
+
+ /* force class to PCI_CLASS_BRIDGE_PCI (0x0604) */
+#define PCI_BRIDGE_CTRL_REG_OFFSET 0x43c
+#define PCI_CLASS_BRIDGE_MASK 0xffff00
+#define PCI_CLASS_BRIDGE_SHIFT 8
+ iproc_pci_raw_config_read32(pcie, 0, PCI_BRIDGE_CTRL_REG_OFFSET,
+ 4, &class);
+ class &= ~PCI_CLASS_BRIDGE_MASK;
+ class |= (PCI_CLASS_BRIDGE_PCI << PCI_CLASS_BRIDGE_SHIFT);
+ iproc_pci_raw_config_write32(pcie, 0, PCI_BRIDGE_CTRL_REG_OFFSET,
+ 4, class);
+
+ /* check link status to see if link is active */
+ iproc_pci_raw_config_read32(pcie, 0, IPROC_PCI_EXP_CAP + PCI_EXP_LNKSTA,
+ 2, &link_status);
+ if (link_status & PCI_EXP_LNKSTA_NLW)
+ link_is_active = true;
+
+ if (!link_is_active) {
+ /* try GEN 1 link speed */
+#define PCI_TARGET_LINK_SPEED_MASK 0xf
+#define PCI_TARGET_LINK_SPEED_GEN2 0x2
+#define PCI_TARGET_LINK_SPEED_GEN1 0x1
+ iproc_pci_raw_config_read32(pcie, 0,
+ IPROC_PCI_EXP_CAP + PCI_EXP_LNKCTL2,
+ 4, &link_ctrl);
+ if ((link_ctrl & PCI_TARGET_LINK_SPEED_MASK) ==
+ PCI_TARGET_LINK_SPEED_GEN2) {
+ link_ctrl &= ~PCI_TARGET_LINK_SPEED_MASK;
+ link_ctrl |= PCI_TARGET_LINK_SPEED_GEN1;
+ iproc_pci_raw_config_write32(pcie, 0,
+ IPROC_PCI_EXP_CAP + PCI_EXP_LNKCTL2,
+ 4, link_ctrl);
+ msleep(100);
+
+ iproc_pci_raw_config_read32(pcie, 0,
+ IPROC_PCI_EXP_CAP + PCI_EXP_LNKSTA,
+ 2, &link_status);
+ if (link_status & PCI_EXP_LNKSTA_NLW)
+ link_is_active = true;
+ }
+ }
+
+ dev_info(dev, "link: %s\n", link_is_active ? "UP" : "DOWN");
+
+ return link_is_active ? 0 : -ENODEV;
+}
+
+static void iproc_pcie_enable(struct iproc_pcie *pcie)
+{
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK);
+}
+
+static inline bool iproc_pcie_ob_is_valid(struct iproc_pcie *pcie,
+ int window_idx)
+{
+ u32 val;
+
+ val = iproc_pcie_read_reg(pcie, MAP_REG(IPROC_PCIE_OARR0, window_idx));
+
+ return !!(val & OARR_VALID);
+}
+
+static inline int iproc_pcie_ob_write(struct iproc_pcie *pcie, int window_idx,
+ int size_idx, u64 axi_addr, u64 pci_addr)
+{
+ struct device *dev = pcie->dev;
+ u16 oarr_offset, omap_offset;
+
+ /*
+ * Derive the OARR/OMAP offset from the first pair (OARR0/OMAP0) based
+ * on window index.
+ */
+ oarr_offset = iproc_pcie_reg_offset(pcie, MAP_REG(IPROC_PCIE_OARR0,
+ window_idx));
+ omap_offset = iproc_pcie_reg_offset(pcie, MAP_REG(IPROC_PCIE_OMAP0,
+ window_idx));
+ if (iproc_pcie_reg_is_invalid(oarr_offset) ||
+ iproc_pcie_reg_is_invalid(omap_offset))
+ return -EINVAL;
+
+ /*
+ * Program the OARR registers. The upper 32-bit OARR register is
+ * always right after the lower 32-bit OARR register.
+ */
+ writel(lower_32_bits(axi_addr) | (size_idx << OARR_SIZE_CFG_SHIFT) |
+ OARR_VALID, pcie->base + oarr_offset);
+ writel(upper_32_bits(axi_addr), pcie->base + oarr_offset + 4);
+
+ /* now program the OMAP registers */
+ writel(lower_32_bits(pci_addr), pcie->base + omap_offset);
+ writel(upper_32_bits(pci_addr), pcie->base + omap_offset + 4);
+
+ dev_dbg(dev, "ob window [%d]: offset 0x%x axi %pap pci %pap\n",
+ window_idx, oarr_offset, &axi_addr, &pci_addr);
+ dev_dbg(dev, "oarr lo 0x%x oarr hi 0x%x\n",
+ readl(pcie->base + oarr_offset),
+ readl(pcie->base + oarr_offset + 4));
+ dev_dbg(dev, "omap lo 0x%x omap hi 0x%x\n",
+ readl(pcie->base + omap_offset),
+ readl(pcie->base + omap_offset + 4));
+
+ return 0;
+}
+
+/**
+ * Some iProc SoCs require the SW to configure the outbound address mapping
+ *
+ * Outbound address translation:
+ *
+ * iproc_pcie_address = axi_address - axi_offset
+ * OARR = iproc_pcie_address
+ * OMAP = pci_addr
+ *
+ * axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address
+ */
+static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr,
+ u64 pci_addr, resource_size_t size)
+{
+ struct iproc_pcie_ob *ob = &pcie->ob;
+ struct device *dev = pcie->dev;
+ int ret = -EINVAL, window_idx, size_idx;
+
+ if (axi_addr < ob->axi_offset) {
+ dev_err(dev, "axi address %pap less than offset %pap\n",
+ &axi_addr, &ob->axi_offset);
+ return -EINVAL;
+ }
+
+ /*
+ * Translate the AXI address to the internal address used by the iProc
+ * PCIe core before programming the OARR
+ */
+ axi_addr -= ob->axi_offset;
+
+ /* iterate through all OARR/OMAP mapping windows */
+ for (window_idx = ob->nr_windows - 1; window_idx >= 0; window_idx--) {
+ const struct iproc_pcie_ob_map *ob_map =
+ &pcie->ob_map[window_idx];
+
+ /*
+ * If current outbound window is already in use, move on to the
+ * next one.
+ */
+ if (iproc_pcie_ob_is_valid(pcie, window_idx))
+ continue;
+
+ /*
+ * Iterate through all supported window sizes within the
+ * OARR/OMAP pair to find a match. Go through the window sizes
+ * in a descending order.
+ */
+ for (size_idx = ob_map->nr_sizes - 1; size_idx >= 0;
+ size_idx--) {
+ resource_size_t window_size =
+ ob_map->window_sizes[size_idx] * SZ_1M;
+
+ if (size < window_size)
+ continue;
+
+ if (!IS_ALIGNED(axi_addr, window_size) ||
+ !IS_ALIGNED(pci_addr, window_size)) {
+ dev_err(dev,
+ "axi %pap or pci %pap not aligned\n",
+ &axi_addr, &pci_addr);
+ return -EINVAL;
+ }
+
+ /*
+ * Match found! Program both OARR and OMAP and mark
+ * them as a valid entry.
+ */
+ ret = iproc_pcie_ob_write(pcie, window_idx, size_idx,
+ axi_addr, pci_addr);
+ if (ret)
+ goto err_ob;
+
+ size -= window_size;
+ if (size == 0)
+ return 0;
+
+ /*
+ * If we are here, we are done with the current window,
+ * but not yet finished all mappings. Need to move on
+ * to the next window.
+ */
+ axi_addr += window_size;
+ pci_addr += window_size;
+ break;
+ }
+ }
+
+err_ob:
+ dev_err(dev, "unable to configure outbound mapping\n");
+ dev_err(dev,
+ "axi %pap, axi offset %pap, pci %pap, res size %pap\n",
+ &axi_addr, &ob->axi_offset, &pci_addr, &size);
+
+ return ret;
+}
+
+static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
+ struct list_head *resources)
+{
+ struct device *dev = pcie->dev;
+ struct resource_entry *window;
+ int ret;
+
+ resource_list_for_each_entry(window, resources) {
+ struct resource *res = window->res;
+ u64 res_type = resource_type(res);
+
+ switch (res_type) {
+ case IORESOURCE_IO:
+ case IORESOURCE_BUS:
+ break;
+ case IORESOURCE_MEM:
+ ret = iproc_pcie_setup_ob(pcie, res->start,
+ res->start - window->offset,
+ resource_size(res));
+ if (ret)
+ return ret;
+ break;
+ default:
+ dev_err(dev, "invalid resource %pR\n", res);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static inline bool iproc_pcie_ib_is_in_use(struct iproc_pcie *pcie,
+ int region_idx)
+{
+ const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx];
+ u32 val;
+
+ val = iproc_pcie_read_reg(pcie, MAP_REG(IPROC_PCIE_IARR0, region_idx));
+
+ return !!(val & (BIT(ib_map->nr_sizes) - 1));
+}
+
+static inline bool iproc_pcie_ib_check_type(const struct iproc_pcie_ib_map *ib_map,
+ enum iproc_pcie_ib_map_type type)
+{
+ return !!(ib_map->type == type);
+}
+
+static int iproc_pcie_ib_write(struct iproc_pcie *pcie, int region_idx,
+ int size_idx, int nr_windows, u64 axi_addr,
+ u64 pci_addr, resource_size_t size)
+{
+ struct device *dev = pcie->dev;
+ const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx];
+ u16 iarr_offset, imap_offset;
+ u32 val;
+ int window_idx;
+
+ iarr_offset = iproc_pcie_reg_offset(pcie,
+ MAP_REG(IPROC_PCIE_IARR0, region_idx));
+ imap_offset = iproc_pcie_reg_offset(pcie,
+ MAP_REG(IPROC_PCIE_IMAP0, region_idx));
+ if (iproc_pcie_reg_is_invalid(iarr_offset) ||
+ iproc_pcie_reg_is_invalid(imap_offset))
+ return -EINVAL;
+
+ dev_dbg(dev, "ib region [%d]: offset 0x%x axi %pap pci %pap\n",
+ region_idx, iarr_offset, &axi_addr, &pci_addr);
+
+ /*
+ * Program the IARR registers. The upper 32-bit IARR register is
+ * always right after the lower 32-bit IARR register.
+ */
+ writel(lower_32_bits(pci_addr) | BIT(size_idx),
+ pcie->base + iarr_offset);
+ writel(upper_32_bits(pci_addr), pcie->base + iarr_offset + 4);
+
+ dev_dbg(dev, "iarr lo 0x%x iarr hi 0x%x\n",
+ readl(pcie->base + iarr_offset),
+ readl(pcie->base + iarr_offset + 4));
+
+ /*
+ * Now program the IMAP registers. Each IARR region may have one or
+ * more IMAP windows.
+ */
+ size >>= ilog2(nr_windows);
+ for (window_idx = 0; window_idx < nr_windows; window_idx++) {
+ val = readl(pcie->base + imap_offset);
+ val |= lower_32_bits(axi_addr) | IMAP_VALID;
+ writel(val, pcie->base + imap_offset);
+ writel(upper_32_bits(axi_addr),
+ pcie->base + imap_offset + ib_map->imap_addr_offset);
+
+ dev_dbg(dev, "imap window [%d] lo 0x%x hi 0x%x\n",
+ window_idx, readl(pcie->base + imap_offset),
+ readl(pcie->base + imap_offset +
+ ib_map->imap_addr_offset));
+
+ imap_offset += ib_map->imap_window_offset;
+ axi_addr += size;
+ }
+
+ return 0;
+}
+
+static int iproc_pcie_setup_ib(struct iproc_pcie *pcie,
+ struct of_pci_range *range,
+ enum iproc_pcie_ib_map_type type)
+{
+ struct device *dev = pcie->dev;
+ struct iproc_pcie_ib *ib = &pcie->ib;
+ int ret;
+ unsigned int region_idx, size_idx;
+ u64 axi_addr = range->cpu_addr, pci_addr = range->pci_addr;
+ resource_size_t size = range->size;
+
+ /* iterate through all IARR mapping regions */
+ for (region_idx = 0; region_idx < ib->nr_regions; region_idx++) {
+ const struct iproc_pcie_ib_map *ib_map =
+ &pcie->ib_map[region_idx];
+
+ /*
+ * If current inbound region is already in use or not a
+ * compatible type, move on to the next.
+ */
+ if (iproc_pcie_ib_is_in_use(pcie, region_idx) ||
+ !iproc_pcie_ib_check_type(ib_map, type))
+ continue;
+
+ /* iterate through all supported region sizes to find a match */
+ for (size_idx = 0; size_idx < ib_map->nr_sizes; size_idx++) {
+ resource_size_t region_size =
+ ib_map->region_sizes[size_idx] * ib_map->size_unit;
+
+ if (size != region_size)
+ continue;
+
+ if (!IS_ALIGNED(axi_addr, region_size) ||
+ !IS_ALIGNED(pci_addr, region_size)) {
+ dev_err(dev,
+ "axi %pap or pci %pap not aligned\n",
+ &axi_addr, &pci_addr);
+ return -EINVAL;
+ }
+
+ /* Match found! Program IARR and all IMAP windows. */
+ ret = iproc_pcie_ib_write(pcie, region_idx, size_idx,
+ ib_map->nr_windows, axi_addr,
+ pci_addr, size);
+ if (ret)
+ goto err_ib;
+ else
+ return 0;
+
+ }
+ }
+ ret = -EINVAL;
+
+err_ib:
+ dev_err(dev, "unable to configure inbound mapping\n");
+ dev_err(dev, "axi %pap, pci %pap, res size %pap\n",
+ &axi_addr, &pci_addr, &size);
+
+ return ret;
+}
+
+static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie)
+{
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+ int ret;
+
+ /* Get the dma-ranges from DT */
+ ret = of_pci_dma_range_parser_init(&parser, pcie->dev->of_node);
+ if (ret)
+ return ret;
+
+ for_each_of_pci_range(&parser, &range) {
+ /* Each range entry corresponds to an inbound mapping region */
+ ret = iproc_pcie_setup_ib(pcie, &range, IPROC_PCIE_IB_MAP_MEM);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int iproce_pcie_get_msi(struct iproc_pcie *pcie,
+ struct device_node *msi_node,
+ u64 *msi_addr)
+{
+ struct device *dev = pcie->dev;
+ int ret;
+ struct resource res;
+
+ /*
+ * Check if 'msi-map' points to ARM GICv3 ITS, which is the only
+ * supported external MSI controller that requires steering.
+ */
+ if (!of_device_is_compatible(msi_node, "arm,gic-v3-its")) {
+ dev_err(dev, "unable to find compatible MSI controller\n");
+ return -ENODEV;
+ }
+
+ /* derive GITS_TRANSLATER address from GICv3 */
+ ret = of_address_to_resource(msi_node, 0, &res);
+ if (ret < 0) {
+ dev_err(dev, "unable to obtain MSI controller resources\n");
+ return ret;
+ }
+
+ *msi_addr = res.start + GITS_TRANSLATER;
+ return 0;
+}
+
+static int iproc_pcie_paxb_v2_msi_steer(struct iproc_pcie *pcie, u64 msi_addr)
+{
+ int ret;
+ struct of_pci_range range;
+
+ memset(&range, 0, sizeof(range));
+ range.size = SZ_32K;
+ range.pci_addr = range.cpu_addr = msi_addr & ~(range.size - 1);
+
+ ret = iproc_pcie_setup_ib(pcie, &range, IPROC_PCIE_IB_MAP_IO);
+ return ret;
+}
+
+static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64 msi_addr,
+ bool enable)
+{
+ u32 val;
+
+ if (!enable) {
+ /*
+ * Disable PAXC MSI steering. All write transfers will be
+ * treated as non-MSI transfers
+ */
+ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
+ val &= ~MSI_ENABLE_CFG;
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
+ return;
+ }
+
+ /*
+ * Program bits [43:13] of address of GITS_TRANSLATER register into
+ * bits [30:0] of the MSI base address register. In fact, in all iProc
+ * based SoCs, all I/O register bases are well below the 32-bit
+ * boundary, so we can safely assume bits [43:32] are always zeros.
+ */
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_BASE_ADDR,
+ (u32)(msi_addr >> 13));
+
+ /* use a default 8K window size */
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_WINDOW_SIZE, 0);
+
+ /* steering MSI to GICv3 ITS */
+ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_GIC_MODE);
+ val |= GIC_V3_CFG;
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_GIC_MODE, val);
+
+ /*
+ * Program bits [43:2] of address of GITS_TRANSLATER register into the
+ * iProc MSI address registers.
+ */
+ msi_addr >>= 2;
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_ADDR_HI,
+ upper_32_bits(msi_addr));
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_ADDR_LO,
+ lower_32_bits(msi_addr));
+
+ /* enable MSI */
+ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
+ val |= MSI_ENABLE_CFG;
+ iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
+}
+
+static int iproc_pcie_msi_steer(struct iproc_pcie *pcie,
+ struct device_node *msi_node)
+{
+ struct device *dev = pcie->dev;
+ int ret;
+ u64 msi_addr;
+
+ ret = iproce_pcie_get_msi(pcie, msi_node, &msi_addr);
+ if (ret < 0) {
+ dev_err(dev, "msi steering failed\n");
+ return ret;
+ }
+
+ switch (pcie->type) {
+ case IPROC_PCIE_PAXB_V2:
+ ret = iproc_pcie_paxb_v2_msi_steer(pcie, msi_addr);
+ if (ret)
+ return ret;
+ break;
+ case IPROC_PCIE_PAXC_V2:
+ iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
+{
+ struct device_node *msi_node;
+ int ret;
+
+ /*
+ * Either the "msi-parent" or the "msi-map" phandle needs to exist
+ * for us to obtain the MSI node.
+ */
+
+ msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
+ if (!msi_node) {
+ const __be32 *msi_map = NULL;
+ int len;
+ u32 phandle;
+
+ msi_map = of_get_property(pcie->dev->of_node, "msi-map", &len);
+ if (!msi_map)
+ return -ENODEV;
+
+ phandle = be32_to_cpup(msi_map + 1);
+ msi_node = of_find_node_by_phandle(phandle);
+ if (!msi_node)
+ return -ENODEV;
+ }
+
+ /*
+ * Certain revisions of the iProc PCIe controller require additional
+ * configurations to steer the MSI writes towards an external MSI
+ * controller.
+ */
+ if (pcie->need_msi_steer) {
+ ret = iproc_pcie_msi_steer(pcie, msi_node);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * If another MSI controller is being used, the call below should fail
+ * but that is okay
+ */
+ return iproc_msi_init(pcie, msi_node);
+}
+
+static void iproc_pcie_msi_disable(struct iproc_pcie *pcie)
+{
+ iproc_msi_exit(pcie);
+}
+
+static int iproc_pcie_rev_init(struct iproc_pcie *pcie)
+{
+ struct device *dev = pcie->dev;
+ unsigned int reg_idx;
+ const u16 *regs;
+
+ switch (pcie->type) {
+ case IPROC_PCIE_PAXB_BCMA:
+ regs = iproc_pcie_reg_paxb_bcma;
+ break;
+ case IPROC_PCIE_PAXB:
+ regs = iproc_pcie_reg_paxb;
+ pcie->iproc_cfg_read = true;
+ pcie->has_apb_err_disable = true;
+ if (pcie->need_ob_cfg) {
+ pcie->ob_map = paxb_ob_map;
+ pcie->ob.nr_windows = ARRAY_SIZE(paxb_ob_map);
+ }
+ break;
+ case IPROC_PCIE_PAXB_V2:
+ regs = iproc_pcie_reg_paxb_v2;
+ pcie->has_apb_err_disable = true;
+ if (pcie->need_ob_cfg) {
+ pcie->ob_map = paxb_v2_ob_map;
+ pcie->ob.nr_windows = ARRAY_SIZE(paxb_v2_ob_map);
+ }
+ pcie->ib.nr_regions = ARRAY_SIZE(paxb_v2_ib_map);
+ pcie->ib_map = paxb_v2_ib_map;
+ pcie->need_msi_steer = true;
+ dev_warn(dev, "reads of config registers that contain %#x return incorrect data\n",
+ CFG_RETRY_STATUS);
+ break;
+ case IPROC_PCIE_PAXC:
+ regs = iproc_pcie_reg_paxc;
+ pcie->ep_is_internal = true;
+ pcie->iproc_cfg_read = true;
+ pcie->rej_unconfig_pf = true;
+ break;
+ case IPROC_PCIE_PAXC_V2:
+ regs = iproc_pcie_reg_paxc_v2;
+ pcie->ep_is_internal = true;
+ pcie->iproc_cfg_read = true;
+ pcie->rej_unconfig_pf = true;
+ pcie->need_msi_steer = true;
+ break;
+ default:
+ dev_err(dev, "incompatible iProc PCIe interface\n");
+ return -EINVAL;
+ }
+
+ pcie->reg_offsets = devm_kcalloc(dev, IPROC_PCIE_MAX_NUM_REG,
+ sizeof(*pcie->reg_offsets),
+ GFP_KERNEL);
+ if (!pcie->reg_offsets)
+ return -ENOMEM;
+
+ /* go through the register table and populate all valid registers */
+ pcie->reg_offsets[0] = (pcie->type == IPROC_PCIE_PAXC_V2) ?
+ IPROC_PCIE_REG_INVALID : regs[0];
+ for (reg_idx = 1; reg_idx < IPROC_PCIE_MAX_NUM_REG; reg_idx++)
+ pcie->reg_offsets[reg_idx] = regs[reg_idx] ?
+ regs[reg_idx] : IPROC_PCIE_REG_INVALID;
+
+ return 0;
+}
+
+int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
+{
+ struct device *dev;
+ int ret;
+ struct pci_bus *child;
+ struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
+
+ dev = pcie->dev;
+
+ ret = iproc_pcie_rev_init(pcie);
+ if (ret) {
+ dev_err(dev, "unable to initialize controller parameters\n");
+ return ret;
+ }
+
+ ret = devm_request_pci_bus_resources(dev, res);
+ if (ret)
+ return ret;
+
+ ret = phy_init(pcie->phy);
+ if (ret) {
+ dev_err(dev, "unable to initialize PCIe PHY\n");
+ return ret;
+ }
+
+ ret = phy_power_on(pcie->phy);
+ if (ret) {
+ dev_err(dev, "unable to power on PCIe PHY\n");
+ goto err_exit_phy;
+ }
+
+ iproc_pcie_perst_ctrl(pcie, true);
+ iproc_pcie_perst_ctrl(pcie, false);
+
+ if (pcie->need_ob_cfg) {
+ ret = iproc_pcie_map_ranges(pcie, res);
+ if (ret) {
+ dev_err(dev, "map failed\n");
+ goto err_power_off_phy;
+ }
+ }
+
+ if (pcie->need_ib_cfg) {
+ ret = iproc_pcie_map_dma_ranges(pcie);
+ if (ret && ret != -ENOENT)
+ goto err_power_off_phy;
+ }
+
+ ret = iproc_pcie_check_link(pcie);
+ if (ret) {
+ dev_err(dev, "no PCIe EP device detected\n");
+ goto err_power_off_phy;
+ }
+
+ iproc_pcie_enable(pcie);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ if (iproc_pcie_msi_enable(pcie))
+ dev_info(dev, "not using iProc MSI\n");
+
+ list_splice_init(res, &host->windows);
+ host->busnr = 0;
+ host->dev.parent = dev;
+ host->ops = &iproc_pcie_ops;
+ host->sysdata = pcie;
+ host->map_irq = pcie->map_irq;
+ host->swizzle_irq = pci_common_swizzle;
+
+ ret = pci_scan_root_bus_bridge(host);
+ if (ret < 0) {
+ dev_err(dev, "failed to scan host: %d\n", ret);
+ goto err_power_off_phy;
+ }
+
+ pci_assign_unassigned_bus_resources(host->bus);
+
+ pcie->root_bus = host->bus;
+
+ list_for_each_entry(child, &host->bus->children, node)
+ pcie_bus_configure_settings(child);
+
+ pci_bus_add_devices(host->bus);
+
+ return 0;
+
+err_power_off_phy:
+ phy_power_off(pcie->phy);
+err_exit_phy:
+ phy_exit(pcie->phy);
+ return ret;
+}
+EXPORT_SYMBOL(iproc_pcie_setup);
+
+int iproc_pcie_remove(struct iproc_pcie *pcie)
+{
+ pci_stop_root_bus(pcie->root_bus);
+ pci_remove_root_bus(pcie->root_bus);
+
+ iproc_pcie_msi_disable(pcie);
+
+ phy_power_off(pcie->phy);
+ phy_exit(pcie->phy);
+
+ return 0;
+}
+EXPORT_SYMBOL(iproc_pcie_remove);
+
+/*
+ * The MSI parsing logic in certain revisions of Broadcom PAXC based root
+ * complex does not work and needs to be disabled
+ */
+static void quirk_paxc_disable_msi_parsing(struct pci_dev *pdev)
+{
+ struct iproc_pcie *pcie = iproc_data(pdev->bus);
+
+ if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ iproc_pcie_paxc_v2_msi_steer(pcie, 0, false);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0,
+ quirk_paxc_disable_msi_parsing);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802,
+ quirk_paxc_disable_msi_parsing);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804,
+ quirk_paxc_disable_msi_parsing);
+
+MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
+MODULE_LICENSE("GPL v2");