v4.19.13 snapshot.
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
new file mode 100644
index 0000000..a41d79b
--- /dev/null
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -0,0 +1,1340 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe driver for Marvell Armada 370 and Armada XP SoCs
+ *
+ * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/msi.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+
+#include "../pci.h"
+
+/*
+ * PCIe unit register offsets.
+ */
+#define PCIE_DEV_ID_OFF 0x0000
+#define PCIE_CMD_OFF 0x0004
+#define PCIE_DEV_REV_OFF 0x0008
+#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
+#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
+#define PCIE_CAP_PCIEXP 0x0060
+#define PCIE_HEADER_LOG_4_OFF 0x0128
+#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
+#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
+#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
+#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
+#define PCIE_WIN5_CTRL_OFF 0x1880
+#define PCIE_WIN5_BASE_OFF 0x1884
+#define PCIE_WIN5_REMAP_OFF 0x188c
+#define PCIE_CONF_ADDR_OFF 0x18f8
+#define PCIE_CONF_ADDR_EN 0x80000000
+#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
+#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
+#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
+#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
+#define PCIE_CONF_ADDR(bus, devfn, where) \
+ (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \
+ PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
+ PCIE_CONF_ADDR_EN)
+#define PCIE_CONF_DATA_OFF 0x18fc
+#define PCIE_MASK_OFF 0x1910
+#define PCIE_MASK_ENABLE_INTS 0x0f000000
+#define PCIE_CTRL_OFF 0x1a00
+#define PCIE_CTRL_X1_MODE 0x0001
+#define PCIE_STAT_OFF 0x1a04
+#define PCIE_STAT_BUS 0xff00
+#define PCIE_STAT_DEV 0x1f0000
+#define PCIE_STAT_LINK_DOWN BIT(0)
+#define PCIE_RC_RTSTA 0x1a14
+#define PCIE_DEBUG_CTRL 0x1a60
+#define PCIE_DEBUG_SOFT_RESET BIT(20)
+
+enum {
+ PCISWCAP = PCI_BRIDGE_CONTROL + 2,
+ PCISWCAP_EXP_LIST_ID = PCISWCAP + PCI_CAP_LIST_ID,
+ PCISWCAP_EXP_DEVCAP = PCISWCAP + PCI_EXP_DEVCAP,
+ PCISWCAP_EXP_DEVCTL = PCISWCAP + PCI_EXP_DEVCTL,
+ PCISWCAP_EXP_LNKCAP = PCISWCAP + PCI_EXP_LNKCAP,
+ PCISWCAP_EXP_LNKCTL = PCISWCAP + PCI_EXP_LNKCTL,
+ PCISWCAP_EXP_SLTCAP = PCISWCAP + PCI_EXP_SLTCAP,
+ PCISWCAP_EXP_SLTCTL = PCISWCAP + PCI_EXP_SLTCTL,
+ PCISWCAP_EXP_RTCTL = PCISWCAP + PCI_EXP_RTCTL,
+ PCISWCAP_EXP_RTSTA = PCISWCAP + PCI_EXP_RTSTA,
+ PCISWCAP_EXP_DEVCAP2 = PCISWCAP + PCI_EXP_DEVCAP2,
+ PCISWCAP_EXP_DEVCTL2 = PCISWCAP + PCI_EXP_DEVCTL2,
+ PCISWCAP_EXP_LNKCAP2 = PCISWCAP + PCI_EXP_LNKCAP2,
+ PCISWCAP_EXP_LNKCTL2 = PCISWCAP + PCI_EXP_LNKCTL2,
+ PCISWCAP_EXP_SLTCAP2 = PCISWCAP + PCI_EXP_SLTCAP2,
+ PCISWCAP_EXP_SLTCTL2 = PCISWCAP + PCI_EXP_SLTCTL2,
+};
+
+/* PCI configuration space of a PCI-to-PCI bridge */
+struct mvebu_sw_pci_bridge {
+ u16 vendor;
+ u16 device;
+ u16 command;
+ u16 status;
+ u16 class;
+ u8 interface;
+ u8 revision;
+ u8 bist;
+ u8 header_type;
+ u8 latency_timer;
+ u8 cache_line_size;
+ u32 bar[2];
+ u8 primary_bus;
+ u8 secondary_bus;
+ u8 subordinate_bus;
+ u8 secondary_latency_timer;
+ u8 iobase;
+ u8 iolimit;
+ u16 secondary_status;
+ u16 membase;
+ u16 memlimit;
+ u16 iobaseupper;
+ u16 iolimitupper;
+ u32 romaddr;
+ u8 intline;
+ u8 intpin;
+ u16 bridgectrl;
+
+ /* PCI express capability */
+ u32 pcie_sltcap;
+ u16 pcie_devctl;
+ u16 pcie_rtctl;
+};
+
+struct mvebu_pcie_port;
+
+/* Structure representing all PCIe interfaces */
+struct mvebu_pcie {
+ struct platform_device *pdev;
+ struct mvebu_pcie_port *ports;
+ struct msi_controller *msi;
+ struct list_head resources;
+ struct resource io;
+ struct resource realio;
+ struct resource mem;
+ struct resource busn;
+ int nports;
+};
+
+struct mvebu_pcie_window {
+ phys_addr_t base;
+ phys_addr_t remap;
+ size_t size;
+};
+
+/* Structure representing one PCIe interface */
+struct mvebu_pcie_port {
+ char *name;
+ void __iomem *base;
+ u32 port;
+ u32 lane;
+ int devfn;
+ unsigned int mem_target;
+ unsigned int mem_attr;
+ unsigned int io_target;
+ unsigned int io_attr;
+ struct clk *clk;
+ struct gpio_desc *reset_gpio;
+ char *reset_name;
+ struct mvebu_sw_pci_bridge bridge;
+ struct device_node *dn;
+ struct mvebu_pcie *pcie;
+ struct mvebu_pcie_window memwin;
+ struct mvebu_pcie_window iowin;
+ u32 saved_pcie_stat;
+};
+
+static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
+{
+ writel(val, port->base + reg);
+}
+
+static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg)
+{
+ return readl(port->base + reg);
+}
+
+static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port)
+{
+ return port->io_target != -1 && port->io_attr != -1;
+}
+
+static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
+{
+ return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
+}
+
+static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
+{
+ u32 stat;
+
+ stat = mvebu_readl(port, PCIE_STAT_OFF);
+ stat &= ~PCIE_STAT_BUS;
+ stat |= nr << 8;
+ mvebu_writel(port, stat, PCIE_STAT_OFF);
+}
+
+static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
+{
+ u32 stat;
+
+ stat = mvebu_readl(port, PCIE_STAT_OFF);
+ stat &= ~PCIE_STAT_DEV;
+ stat |= nr << 16;
+ mvebu_writel(port, stat, PCIE_STAT_OFF);
+}
+
+/*
+ * Setup PCIE BARs and Address Decode Wins:
+ * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
+ * WIN[0-3] -> DRAM bank[0-3]
+ */
+static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
+{
+ const struct mbus_dram_target_info *dram;
+ u32 size;
+ int i;
+
+ dram = mv_mbus_dram_info();
+
+ /* First, disable and clear BARs and windows. */
+ for (i = 1; i < 3; i++) {
+ mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
+ mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
+ mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i));
+ }
+
+ for (i = 0; i < 5; i++) {
+ mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i));
+ mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i));
+ mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
+ }
+
+ mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
+ mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
+ mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
+
+ /* Setup windows for DDR banks. Count total DDR size on the fly. */
+ size = 0;
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+
+ mvebu_writel(port, cs->base & 0xffff0000,
+ PCIE_WIN04_BASE_OFF(i));
+ mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
+ mvebu_writel(port,
+ ((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ PCIE_WIN04_CTRL_OFF(i));
+
+ size += cs->size;
+ }
+
+ /* Round up 'size' to the nearest power of two. */
+ if ((size & (size - 1)) != 0)
+ size = 1 << fls(size);
+
+ /* Setup BAR[1] to all DRAM banks. */
+ mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1));
+ mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
+ mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
+ PCIE_BAR_CTRL_OFF(1));
+}
+
+static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
+{
+ u32 cmd, mask;
+
+ /* Point PCIe unit MBUS decode windows to DRAM space. */
+ mvebu_pcie_setup_wins(port);
+
+ /* Master + slave enable. */
+ cmd = mvebu_readl(port, PCIE_CMD_OFF);
+ cmd |= PCI_COMMAND_IO;
+ cmd |= PCI_COMMAND_MEMORY;
+ cmd |= PCI_COMMAND_MASTER;
+ mvebu_writel(port, cmd, PCIE_CMD_OFF);
+
+ /* Enable interrupt lines A-D. */
+ mask = mvebu_readl(port, PCIE_MASK_OFF);
+ mask |= PCIE_MASK_ENABLE_INTS;
+ mvebu_writel(port, mask, PCIE_MASK_OFF);
+}
+
+static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
+ struct pci_bus *bus,
+ u32 devfn, int where, int size, u32 *val)
+{
+ void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
+
+ mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
+ PCIE_CONF_ADDR_OFF);
+
+ switch (size) {
+ case 1:
+ *val = readb_relaxed(conf_data + (where & 3));
+ break;
+ case 2:
+ *val = readw_relaxed(conf_data + (where & 2));
+ break;
+ case 4:
+ *val = readl_relaxed(conf_data);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
+ struct pci_bus *bus,
+ u32 devfn, int where, int size, u32 val)
+{
+ void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
+
+ mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
+ PCIE_CONF_ADDR_OFF);
+
+ switch (size) {
+ case 1:
+ writeb(val, conf_data + (where & 3));
+ break;
+ case 2:
+ writew(val, conf_data + (where & 2));
+ break;
+ case 4:
+ writel(val, conf_data);
+ break;
+ default:
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * Remove windows, starting from the largest ones to the smallest
+ * ones.
+ */
+static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
+ phys_addr_t base, size_t size)
+{
+ while (size) {
+ size_t sz = 1 << (fls(size) - 1);
+
+ mvebu_mbus_del_window(base, sz);
+ base += sz;
+ size -= sz;
+ }
+}
+
+/*
+ * MBus windows can only have a power of two size, but PCI BARs do not
+ * have this constraint. Therefore, we have to split the PCI BAR into
+ * areas each having a power of two size. We start from the largest
+ * one (i.e highest order bit set in the size).
+ */
+static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
+ unsigned int target, unsigned int attribute,
+ phys_addr_t base, size_t size,
+ phys_addr_t remap)
+{
+ size_t size_mapped = 0;
+
+ while (size) {
+ size_t sz = 1 << (fls(size) - 1);
+ int ret;
+
+ ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base,
+ sz, remap);
+ if (ret) {
+ phys_addr_t end = base + sz - 1;
+
+ dev_err(&port->pcie->pdev->dev,
+ "Could not create MBus window at [mem %pa-%pa]: %d\n",
+ &base, &end, ret);
+ mvebu_pcie_del_windows(port, base - size_mapped,
+ size_mapped);
+ return;
+ }
+
+ size -= sz;
+ size_mapped += sz;
+ base += sz;
+ if (remap != MVEBU_MBUS_NO_REMAP)
+ remap += sz;
+ }
+}
+
+static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
+ unsigned int target, unsigned int attribute,
+ const struct mvebu_pcie_window *desired,
+ struct mvebu_pcie_window *cur)
+{
+ if (desired->base == cur->base && desired->remap == cur->remap &&
+ desired->size == cur->size)
+ return;
+
+ if (cur->size != 0) {
+ mvebu_pcie_del_windows(port, cur->base, cur->size);
+ cur->size = 0;
+ cur->base = 0;
+
+ /*
+ * If something tries to change the window while it is enabled
+ * the change will not be done atomically. That would be
+ * difficult to do in the general case.
+ */
+ }
+
+ if (desired->size == 0)
+ return;
+
+ mvebu_pcie_add_windows(port, target, attribute, desired->base,
+ desired->size, desired->remap);
+ *cur = *desired;
+}
+
+static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
+{
+ struct mvebu_pcie_window desired = {};
+
+ /* Are the new iobase/iolimit values invalid? */
+ if (port->bridge.iolimit < port->bridge.iobase ||
+ port->bridge.iolimitupper < port->bridge.iobaseupper ||
+ !(port->bridge.command & PCI_COMMAND_IO)) {
+ mvebu_pcie_set_window(port, port->io_target, port->io_attr,
+ &desired, &port->iowin);
+ return;
+ }
+
+ if (!mvebu_has_ioport(port)) {
+ dev_WARN(&port->pcie->pdev->dev,
+ "Attempt to set IO when IO is disabled\n");
+ return;
+ }
+
+ /*
+ * We read the PCI-to-PCI bridge emulated registers, and
+ * calculate the base address and size of the address decoding
+ * window to setup, according to the PCI-to-PCI bridge
+ * specifications. iobase is the bus address, port->iowin_base
+ * is the CPU address.
+ */
+ desired.remap = ((port->bridge.iobase & 0xF0) << 8) |
+ (port->bridge.iobaseupper << 16);
+ desired.base = port->pcie->io.start + desired.remap;
+ desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) |
+ (port->bridge.iolimitupper << 16)) -
+ desired.remap) +
+ 1;
+
+ mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
+ &port->iowin);
+}
+
+static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
+{
+ struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
+
+ /* Are the new membase/memlimit values invalid? */
+ if (port->bridge.memlimit < port->bridge.membase ||
+ !(port->bridge.command & PCI_COMMAND_MEMORY)) {
+ mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
+ &desired, &port->memwin);
+ return;
+ }
+
+ /*
+ * We read the PCI-to-PCI bridge emulated registers, and
+ * calculate the base address and size of the address decoding
+ * window to setup, according to the PCI-to-PCI bridge
+ * specifications.
+ */
+ desired.base = ((port->bridge.membase & 0xFFF0) << 16);
+ desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
+ desired.base + 1;
+
+ mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
+ &port->memwin);
+}
+
+/*
+ * Initialize the configuration space of the PCI-to-PCI bridge
+ * associated with the given PCIe interface.
+ */
+static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port)
+{
+ struct mvebu_sw_pci_bridge *bridge = &port->bridge;
+
+ memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge));
+
+ bridge->class = PCI_CLASS_BRIDGE_PCI;
+ bridge->vendor = PCI_VENDOR_ID_MARVELL;
+ bridge->device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
+ bridge->revision = mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
+ bridge->header_type = PCI_HEADER_TYPE_BRIDGE;
+ bridge->cache_line_size = 0x10;
+
+ /* We support 32 bits I/O addressing */
+ bridge->iobase = PCI_IO_RANGE_TYPE_32;
+ bridge->iolimit = PCI_IO_RANGE_TYPE_32;
+
+ /* Add capabilities */
+ bridge->status = PCI_STATUS_CAP_LIST;
+}
+
+/*
+ * Read the configuration space of the PCI-to-PCI bridge associated to
+ * the given PCIe interface.
+ */
+static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
+ unsigned int where, int size, u32 *value)
+{
+ struct mvebu_sw_pci_bridge *bridge = &port->bridge;
+
+ switch (where & ~3) {
+ case PCI_VENDOR_ID:
+ *value = bridge->device << 16 | bridge->vendor;
+ break;
+
+ case PCI_COMMAND:
+ *value = bridge->command | bridge->status << 16;
+ break;
+
+ case PCI_CLASS_REVISION:
+ *value = bridge->class << 16 | bridge->interface << 8 |
+ bridge->revision;
+ break;
+
+ case PCI_CACHE_LINE_SIZE:
+ *value = bridge->bist << 24 | bridge->header_type << 16 |
+ bridge->latency_timer << 8 | bridge->cache_line_size;
+ break;
+
+ case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
+ *value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4];
+ break;
+
+ case PCI_PRIMARY_BUS:
+ *value = (bridge->secondary_latency_timer << 24 |
+ bridge->subordinate_bus << 16 |
+ bridge->secondary_bus << 8 |
+ bridge->primary_bus);
+ break;
+
+ case PCI_IO_BASE:
+ if (!mvebu_has_ioport(port))
+ *value = bridge->secondary_status << 16;
+ else
+ *value = (bridge->secondary_status << 16 |
+ bridge->iolimit << 8 |
+ bridge->iobase);
+ break;
+
+ case PCI_MEMORY_BASE:
+ *value = (bridge->memlimit << 16 | bridge->membase);
+ break;
+
+ case PCI_PREF_MEMORY_BASE:
+ *value = 0;
+ break;
+
+ case PCI_IO_BASE_UPPER16:
+ *value = (bridge->iolimitupper << 16 | bridge->iobaseupper);
+ break;
+
+ case PCI_CAPABILITY_LIST:
+ *value = PCISWCAP;
+ break;
+
+ case PCI_ROM_ADDRESS1:
+ *value = 0;
+ break;
+
+ case PCI_INTERRUPT_LINE:
+ /* LINE PIN MIN_GNT MAX_LAT */
+ *value = 0;
+ break;
+
+ case PCISWCAP_EXP_LIST_ID:
+ /* Set PCIe v2, root port, slot support */
+ *value = (PCI_EXP_TYPE_ROOT_PORT << 4 | 2 |
+ PCI_EXP_FLAGS_SLOT) << 16 | PCI_CAP_ID_EXP;
+ break;
+
+ case PCISWCAP_EXP_DEVCAP:
+ *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP);
+ break;
+
+ case PCISWCAP_EXP_DEVCTL:
+ *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) &
+ ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
+ PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
+ *value |= bridge->pcie_devctl;
+ break;
+
+ case PCISWCAP_EXP_LNKCAP:
+ /*
+ * PCIe requires the clock power management capability to be
+ * hard-wired to zero for downstream ports
+ */
+ *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) &
+ ~PCI_EXP_LNKCAP_CLKPM;
+ break;
+
+ case PCISWCAP_EXP_LNKCTL:
+ *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
+ break;
+
+ case PCISWCAP_EXP_SLTCAP:
+ *value = bridge->pcie_sltcap;
+ break;
+
+ case PCISWCAP_EXP_SLTCTL:
+ *value = PCI_EXP_SLTSTA_PDS << 16;
+ break;
+
+ case PCISWCAP_EXP_RTCTL:
+ *value = bridge->pcie_rtctl;
+ break;
+
+ case PCISWCAP_EXP_RTSTA:
+ *value = mvebu_readl(port, PCIE_RC_RTSTA);
+ break;
+
+ /* PCIe requires the v2 fields to be hard-wired to zero */
+ case PCISWCAP_EXP_DEVCAP2:
+ case PCISWCAP_EXP_DEVCTL2:
+ case PCISWCAP_EXP_LNKCAP2:
+ case PCISWCAP_EXP_LNKCTL2:
+ case PCISWCAP_EXP_SLTCAP2:
+ case PCISWCAP_EXP_SLTCTL2:
+ default:
+ /*
+ * PCI defines configuration read accesses to reserved or
+ * unimplemented registers to read as zero and complete
+ * normally.
+ */
+ *value = 0;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ if (size == 2)
+ *value = (*value >> (8 * (where & 3))) & 0xffff;
+ else if (size == 1)
+ *value = (*value >> (8 * (where & 3))) & 0xff;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* Write to the PCI-to-PCI bridge configuration space */
+static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port,
+ unsigned int where, int size, u32 value)
+{
+ struct mvebu_sw_pci_bridge *bridge = &port->bridge;
+ u32 mask, reg;
+ int err;
+
+ if (size == 4)
+ mask = 0x0;
+ else if (size == 2)
+ mask = ~(0xffff << ((where & 3) * 8));
+ else if (size == 1)
+ mask = ~(0xff << ((where & 3) * 8));
+ else
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, ®);
+ if (err)
+ return err;
+
+ value = (reg & mask) | value << ((where & 3) * 8);
+
+ switch (where & ~3) {
+ case PCI_COMMAND:
+ {
+ u32 old = bridge->command;
+
+ if (!mvebu_has_ioport(port))
+ value &= ~PCI_COMMAND_IO;
+
+ bridge->command = value & 0xffff;
+ if ((old ^ bridge->command) & PCI_COMMAND_IO)
+ mvebu_pcie_handle_iobase_change(port);
+ if ((old ^ bridge->command) & PCI_COMMAND_MEMORY)
+ mvebu_pcie_handle_membase_change(port);
+ break;
+ }
+
+ case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
+ bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value;
+ break;
+
+ case PCI_IO_BASE:
+ /*
+ * We also keep bit 1 set, it is a read-only bit that
+ * indicates we support 32 bits addressing for the
+ * I/O
+ */
+ bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32;
+ bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32;
+ mvebu_pcie_handle_iobase_change(port);
+ break;
+
+ case PCI_MEMORY_BASE:
+ bridge->membase = value & 0xffff;
+ bridge->memlimit = value >> 16;
+ mvebu_pcie_handle_membase_change(port);
+ break;
+
+ case PCI_IO_BASE_UPPER16:
+ bridge->iobaseupper = value & 0xffff;
+ bridge->iolimitupper = value >> 16;
+ mvebu_pcie_handle_iobase_change(port);
+ break;
+
+ case PCI_PRIMARY_BUS:
+ bridge->primary_bus = value & 0xff;
+ bridge->secondary_bus = (value >> 8) & 0xff;
+ bridge->subordinate_bus = (value >> 16) & 0xff;
+ bridge->secondary_latency_timer = (value >> 24) & 0xff;
+ mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus);
+ break;
+
+ case PCISWCAP_EXP_DEVCTL:
+ /*
+ * Armada370 data says these bits must always
+ * be zero when in root complex mode.
+ */
+ value &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
+ PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
+
+ /*
+ * If the mask is 0xffff0000, then we only want to write
+ * the device control register, rather than clearing the
+ * RW1C bits in the device status register. Mask out the
+ * status register bits.
+ */
+ if (mask == 0xffff0000)
+ value &= 0xffff;
+
+ mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
+ break;
+
+ case PCISWCAP_EXP_LNKCTL:
+ /*
+ * If we don't support CLKREQ, we must ensure that the
+ * CLKREQ enable bit always reads zero. Since we haven't
+ * had this capability, and it's dependent on board wiring,
+ * disable it for the time being.
+ */
+ value &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
+
+ /*
+ * If the mask is 0xffff0000, then we only want to write
+ * the link control register, rather than clearing the
+ * RW1C bits in the link status register. Mask out the
+ * RW1C status register bits.
+ */
+ if (mask == 0xffff0000)
+ value &= ~((PCI_EXP_LNKSTA_LABS |
+ PCI_EXP_LNKSTA_LBMS) << 16);
+
+ mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
+ break;
+
+ case PCISWCAP_EXP_RTSTA:
+ mvebu_writel(port, value, PCIE_RC_RTSTA);
+ break;
+
+ default:
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
+{
+ return sys->private_data;
+}
+
+static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
+ struct pci_bus *bus,
+ int devfn)
+{
+ int i;
+
+ for (i = 0; i < pcie->nports; i++) {
+ struct mvebu_pcie_port *port = &pcie->ports[i];
+
+ if (bus->number == 0 && port->devfn == devfn)
+ return port;
+ if (bus->number != 0 &&
+ bus->number >= port->bridge.secondary_bus &&
+ bus->number <= port->bridge.subordinate_bus)
+ return port;
+ }
+
+ return NULL;
+}
+
+/* PCI configuration space write function */
+static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ struct mvebu_pcie *pcie = bus->sysdata;
+ struct mvebu_pcie_port *port;
+ int ret;
+
+ port = mvebu_pcie_find_port(pcie, bus, devfn);
+ if (!port)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Access the emulated PCI-to-PCI bridge */
+ if (bus->number == 0)
+ return mvebu_sw_pci_bridge_write(port, where, size, val);
+
+ if (!mvebu_pcie_link_up(port))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Access the real PCIe interface */
+ ret = mvebu_pcie_hw_wr_conf(port, bus, devfn,
+ where, size, val);
+
+ return ret;
+}
+
+/* PCI configuration space read function */
+static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ struct mvebu_pcie *pcie = bus->sysdata;
+ struct mvebu_pcie_port *port;
+ int ret;
+
+ port = mvebu_pcie_find_port(pcie, bus, devfn);
+ if (!port) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /* Access the emulated PCI-to-PCI bridge */
+ if (bus->number == 0)
+ return mvebu_sw_pci_bridge_read(port, where, size, val);
+
+ if (!mvebu_pcie_link_up(port)) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /* Access the real PCIe interface */
+ ret = mvebu_pcie_hw_rd_conf(port, bus, devfn,
+ where, size, val);
+
+ return ret;
+}
+
+static struct pci_ops mvebu_pcie_ops = {
+ .read = mvebu_pcie_rd_conf,
+ .write = mvebu_pcie_wr_conf,
+};
+
+static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
+ const struct resource *res,
+ resource_size_t start,
+ resource_size_t size,
+ resource_size_t align)
+{
+ if (dev->bus->number != 0)
+ return start;
+
+ /*
+ * On the PCI-to-PCI bridge side, the I/O windows must have at
+ * least a 64 KB size and the memory windows must have at
+ * least a 1 MB size. Moreover, MBus windows need to have a
+ * base address aligned on their size, and their size must be
+ * a power of two. This means that if the BAR doesn't have a
+ * power of two size, several MBus windows will actually be
+ * created. We need to ensure that the biggest MBus window
+ * (which will be the first one) is aligned on its size, which
+ * explains the rounddown_pow_of_two() being done here.
+ */
+ if (res->flags & IORESOURCE_IO)
+ return round_up(start, max_t(resource_size_t, SZ_64K,
+ rounddown_pow_of_two(size)));
+ else if (res->flags & IORESOURCE_MEM)
+ return round_up(start, max_t(resource_size_t, SZ_1M,
+ rounddown_pow_of_two(size)));
+ else
+ return start;
+}
+
+static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
+ struct device_node *np,
+ struct mvebu_pcie_port *port)
+{
+ struct resource regs;
+ int ret = 0;
+
+ ret = of_address_to_resource(np, 0, ®s);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return devm_ioremap_resource(&pdev->dev, ®s);
+}
+
+#define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03)
+#define DT_TYPE_IO 0x1
+#define DT_TYPE_MEM32 0x2
+#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
+#define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF)
+
+static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
+ unsigned long type,
+ unsigned int *tgt,
+ unsigned int *attr)
+{
+ const int na = 3, ns = 2;
+ const __be32 *range;
+ int rlen, nranges, rangesz, pna, i;
+
+ *tgt = -1;
+ *attr = -1;
+
+ range = of_get_property(np, "ranges", &rlen);
+ if (!range)
+ return -EINVAL;
+
+ pna = of_n_addr_cells(np);
+ rangesz = pna + na + ns;
+ nranges = rlen / sizeof(__be32) / rangesz;
+
+ for (i = 0; i < nranges; i++, range += rangesz) {
+ u32 flags = of_read_number(range, 1);
+ u32 slot = of_read_number(range + 1, 1);
+ u64 cpuaddr = of_read_number(range + na, pna);
+ unsigned long rtype;
+
+ if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
+ rtype = IORESOURCE_IO;
+ else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
+ rtype = IORESOURCE_MEM;
+ else
+ continue;
+
+ if (slot == PCI_SLOT(devfn) && type == rtype) {
+ *tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
+ *attr = DT_CPUADDR_TO_ATTR(cpuaddr);
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mvebu_pcie_suspend(struct device *dev)
+{
+ struct mvebu_pcie *pcie;
+ int i;
+
+ pcie = dev_get_drvdata(dev);
+ for (i = 0; i < pcie->nports; i++) {
+ struct mvebu_pcie_port *port = pcie->ports + i;
+ port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
+ }
+
+ return 0;
+}
+
+static int mvebu_pcie_resume(struct device *dev)
+{
+ struct mvebu_pcie *pcie;
+ int i;
+
+ pcie = dev_get_drvdata(dev);
+ for (i = 0; i < pcie->nports; i++) {
+ struct mvebu_pcie_port *port = pcie->ports + i;
+ mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
+ mvebu_pcie_setup_hw(port);
+ }
+
+ return 0;
+}
+#endif
+
+static void mvebu_pcie_port_clk_put(void *data)
+{
+ struct mvebu_pcie_port *port = data;
+
+ clk_put(port->clk);
+}
+
+static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
+ struct mvebu_pcie_port *port, struct device_node *child)
+{
+ struct device *dev = &pcie->pdev->dev;
+ enum of_gpio_flags flags;
+ int reset_gpio, ret;
+
+ port->pcie = pcie;
+
+ if (of_property_read_u32(child, "marvell,pcie-port", &port->port)) {
+ dev_warn(dev, "ignoring %pOF, missing pcie-port property\n",
+ child);
+ goto skip;
+ }
+
+ if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane))
+ port->lane = 0;
+
+ port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port,
+ port->lane);
+ if (!port->name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ port->devfn = of_pci_get_devfn(child);
+ if (port->devfn < 0)
+ goto skip;
+
+ ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM,
+ &port->mem_target, &port->mem_attr);
+ if (ret < 0) {
+ dev_err(dev, "%s: cannot get tgt/attr for mem window\n",
+ port->name);
+ goto skip;
+ }
+
+ if (resource_size(&pcie->io) != 0) {
+ mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_IO,
+ &port->io_target, &port->io_attr);
+ } else {
+ port->io_target = -1;
+ port->io_attr = -1;
+ }
+
+ reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
+ if (reset_gpio == -EPROBE_DEFER) {
+ ret = reset_gpio;
+ goto err;
+ }
+
+ if (gpio_is_valid(reset_gpio)) {
+ unsigned long gpio_flags;
+
+ port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
+ port->name);
+ if (!port->reset_name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ if (flags & OF_GPIO_ACTIVE_LOW) {
+ dev_info(dev, "%pOF: reset gpio is active low\n",
+ child);
+ gpio_flags = GPIOF_ACTIVE_LOW |
+ GPIOF_OUT_INIT_LOW;
+ } else {
+ gpio_flags = GPIOF_OUT_INIT_HIGH;
+ }
+
+ ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
+ port->reset_name);
+ if (ret) {
+ if (ret == -EPROBE_DEFER)
+ goto err;
+ goto skip;
+ }
+
+ port->reset_gpio = gpio_to_desc(reset_gpio);
+ }
+
+ port->clk = of_clk_get_by_name(child, NULL);
+ if (IS_ERR(port->clk)) {
+ dev_err(dev, "%s: cannot get clock\n", port->name);
+ goto skip;
+ }
+
+ ret = devm_add_action(dev, mvebu_pcie_port_clk_put, port);
+ if (ret < 0) {
+ clk_put(port->clk);
+ goto err;
+ }
+
+ return 1;
+
+skip:
+ ret = 0;
+
+ /* In the case of skipping, we need to free these */
+ devm_kfree(dev, port->reset_name);
+ port->reset_name = NULL;
+ devm_kfree(dev, port->name);
+ port->name = NULL;
+
+err:
+ return ret;
+}
+
+/*
+ * Power up a PCIe port. PCIe requires the refclk to be stable for 100µs
+ * prior to releasing PERST. See table 2-4 in section 2.6.2 AC Specifications
+ * of the PCI Express Card Electromechanical Specification, 1.1.
+ */
+static int mvebu_pcie_powerup(struct mvebu_pcie_port *port)
+{
+ int ret;
+
+ ret = clk_prepare_enable(port->clk);
+ if (ret < 0)
+ return ret;
+
+ if (port->reset_gpio) {
+ u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
+
+ of_property_read_u32(port->dn, "reset-delay-us",
+ &reset_udelay);
+
+ udelay(100);
+
+ gpiod_set_value_cansleep(port->reset_gpio, 0);
+ msleep(reset_udelay / 1000);
+ }
+
+ return 0;
+}
+
+/*
+ * Power down a PCIe port. Strictly, PCIe requires us to place the card
+ * in D3hot state before asserting PERST#.
+ */
+static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port)
+{
+ gpiod_set_value_cansleep(port->reset_gpio, 1);
+
+ clk_disable_unprepare(port->clk);
+}
+
+/*
+ * We can't use devm_of_pci_get_host_bridge_resources() because we
+ * need to parse our special DT properties encoding the MEM and IO
+ * apertures.
+ */
+static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
+{
+ struct device *dev = &pcie->pdev->dev;
+ struct device_node *np = dev->of_node;
+ int ret;
+
+ INIT_LIST_HEAD(&pcie->resources);
+
+ /* Get the bus range */
+ ret = of_pci_parse_bus_range(np, &pcie->busn);
+ if (ret) {
+ dev_err(dev, "failed to parse bus-range property: %d\n", ret);
+ return ret;
+ }
+ pci_add_resource(&pcie->resources, &pcie->busn);
+
+ /* Get the PCIe memory aperture */
+ mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
+ if (resource_size(&pcie->mem) == 0) {
+ dev_err(dev, "invalid memory aperture size\n");
+ return -EINVAL;
+ }
+
+ pcie->mem.name = "PCI MEM";
+ pci_add_resource(&pcie->resources, &pcie->mem);
+
+ /* Get the PCIe IO aperture */
+ mvebu_mbus_get_pcie_io_aperture(&pcie->io);
+
+ if (resource_size(&pcie->io) != 0) {
+ pcie->realio.flags = pcie->io.flags;
+ pcie->realio.start = PCIBIOS_MIN_IO;
+ pcie->realio.end = min_t(resource_size_t,
+ IO_SPACE_LIMIT - SZ_64K,
+ resource_size(&pcie->io) - 1);
+ pcie->realio.name = "PCI I/O";
+
+ pci_add_resource(&pcie->resources, &pcie->realio);
+ }
+
+ return devm_request_pci_bus_resources(dev, &pcie->resources);
+}
+
+/*
+ * This is a copy of pci_host_probe(), except that it does the I/O
+ * remap as the last step, once we are sure we won't fail.
+ *
+ * It should be removed once the I/O remap error handling issue has
+ * been sorted out.
+ */
+static int mvebu_pci_host_probe(struct pci_host_bridge *bridge)
+{
+ struct mvebu_pcie *pcie;
+ struct pci_bus *bus, *child;
+ int ret;
+
+ ret = pci_scan_root_bus_bridge(bridge);
+ if (ret < 0) {
+ dev_err(bridge->dev.parent, "Scanning root bridge failed");
+ return ret;
+ }
+
+ pcie = pci_host_bridge_priv(bridge);
+ if (resource_size(&pcie->io) != 0) {
+ unsigned int i;
+
+ for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K)
+ pci_ioremap_io(i, pcie->io.start + i);
+ }
+
+ bus = bridge->bus;
+
+ /*
+ * We insert PCI resources into the iomem_resource and
+ * ioport_resource trees in either pci_bus_claim_resources()
+ * or pci_bus_assign_resources().
+ */
+ if (pci_has_flag(PCI_PROBE_ONLY)) {
+ pci_bus_claim_resources(bus);
+ } else {
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+ }
+
+ pci_bus_add_devices(bus);
+ return 0;
+}
+
+static int mvebu_pcie_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mvebu_pcie *pcie;
+ struct pci_host_bridge *bridge;
+ struct device_node *np = dev->of_node;
+ struct device_node *child;
+ int num, i, ret;
+
+ bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct mvebu_pcie));
+ if (!bridge)
+ return -ENOMEM;
+
+ pcie = pci_host_bridge_priv(bridge);
+ pcie->pdev = pdev;
+ platform_set_drvdata(pdev, pcie);
+
+ ret = mvebu_pcie_parse_request_resources(pcie);
+ if (ret)
+ return ret;
+
+ num = of_get_available_child_count(np);
+
+ pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL);
+ if (!pcie->ports)
+ return -ENOMEM;
+
+ i = 0;
+ for_each_available_child_of_node(np, child) {
+ struct mvebu_pcie_port *port = &pcie->ports[i];
+
+ ret = mvebu_pcie_parse_port(pcie, port, child);
+ if (ret < 0) {
+ of_node_put(child);
+ return ret;
+ } else if (ret == 0) {
+ continue;
+ }
+
+ port->dn = child;
+ i++;
+ }
+ pcie->nports = i;
+
+ for (i = 0; i < pcie->nports; i++) {
+ struct mvebu_pcie_port *port = &pcie->ports[i];
+
+ child = port->dn;
+ if (!child)
+ continue;
+
+ ret = mvebu_pcie_powerup(port);
+ if (ret < 0)
+ continue;
+
+ port->base = mvebu_pcie_map_registers(pdev, child, port);
+ if (IS_ERR(port->base)) {
+ dev_err(dev, "%s: cannot map registers\n", port->name);
+ port->base = NULL;
+ mvebu_pcie_powerdown(port);
+ continue;
+ }
+
+ mvebu_pcie_setup_hw(port);
+ mvebu_pcie_set_local_dev_nr(port, 1);
+ mvebu_sw_pci_bridge_init(port);
+ }
+
+ pcie->nports = i;
+
+ list_splice_init(&pcie->resources, &bridge->windows);
+ bridge->dev.parent = dev;
+ bridge->sysdata = pcie;
+ bridge->busnr = 0;
+ bridge->ops = &mvebu_pcie_ops;
+ bridge->map_irq = of_irq_parse_and_map_pci;
+ bridge->swizzle_irq = pci_common_swizzle;
+ bridge->align_resource = mvebu_pcie_align_resource;
+ bridge->msi = pcie->msi;
+
+ return mvebu_pci_host_probe(bridge);
+}
+
+static const struct of_device_id mvebu_pcie_of_match_table[] = {
+ { .compatible = "marvell,armada-xp-pcie", },
+ { .compatible = "marvell,armada-370-pcie", },
+ { .compatible = "marvell,dove-pcie", },
+ { .compatible = "marvell,kirkwood-pcie", },
+ {},
+};
+
+static const struct dev_pm_ops mvebu_pcie_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume)
+};
+
+static struct platform_driver mvebu_pcie_driver = {
+ .driver = {
+ .name = "mvebu-pcie",
+ .of_match_table = mvebu_pcie_of_match_table,
+ /* driver unloading/unbinding currently not supported */
+ .suppress_bind_attrs = true,
+ .pm = &mvebu_pcie_pm_ops,
+ },
+ .probe = mvebu_pcie_probe,
+};
+builtin_platform_driver(mvebu_pcie_driver);