v4.19.13 snapshot.
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
new file mode 100644
index 0000000..69bd984
--- /dev/null
+++ b/drivers/parisc/lba_pci.c
@@ -0,0 +1,1745 @@
+/*
+**
+** PCI Lower Bus Adapter (LBA) manager
+**
+** (c) Copyright 1999,2000 Grant Grundler
+** (c) Copyright 1999,2000 Hewlett-Packard Company
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+**
+** This module primarily provides access to PCI bus (config/IOport
+** spaces) on platforms with an SBA/LBA chipset. A/B/C/J/L/N-class
+** with 4 digit model numbers - eg C3000 (and A400...sigh).
+**
+** LBA driver isn't as simple as the Dino driver because:
+** (a) this chip has substantial bug fixes between revisions
+** (Only one Dino bug has a software workaround :^( )
+** (b) has more options which we don't (yet) support (DMA hints, OLARD)
+** (c) IRQ support lives in the I/O SAPIC driver (not with PCI driver)
+** (d) play nicely with both PAT and "Legacy" PA-RISC firmware (PDC).
+** (dino only deals with "Legacy" PDC)
+**
+** LBA driver passes the I/O SAPIC HPA to the I/O SAPIC driver.
+** (I/O SAPIC is integratd in the LBA chip).
+**
+** FIXME: Add support to SBA and LBA drivers for DMA hint sets
+** FIXME: Add support for PCI card hot-plug (OLARD).
+*/
+
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/init.h> /* for __init */
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+#include <asm/pdc.h>
+#include <asm/pdcpat.h>
+#include <asm/page.h>
+
+#include <asm/ropes.h>
+#include <asm/hardware.h> /* for register_parisc_driver() stuff */
+#include <asm/parisc-device.h>
+#include <asm/io.h> /* read/write stuff */
+
+#undef DEBUG_LBA /* general stuff */
+#undef DEBUG_LBA_PORT /* debug I/O Port access */
+#undef DEBUG_LBA_CFG /* debug Config Space Access (ie PCI Bus walk) */
+#undef DEBUG_LBA_PAT /* debug PCI Resource Mgt code - PDC PAT only */
+
+#undef FBB_SUPPORT /* Fast Back-Back xfers - NOT READY YET */
+
+
+#ifdef DEBUG_LBA
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#ifdef DEBUG_LBA_PORT
+#define DBG_PORT(x...) printk(x)
+#else
+#define DBG_PORT(x...)
+#endif
+
+#ifdef DEBUG_LBA_CFG
+#define DBG_CFG(x...) printk(x)
+#else
+#define DBG_CFG(x...)
+#endif
+
+#ifdef DEBUG_LBA_PAT
+#define DBG_PAT(x...) printk(x)
+#else
+#define DBG_PAT(x...)
+#endif
+
+
+/*
+** Config accessor functions only pass in the 8-bit bus number and not
+** the 8-bit "PCI Segment" number. Each LBA will be assigned a PCI bus
+** number based on what firmware wrote into the scratch register.
+**
+** The "secondary" bus number is set to this before calling
+** pci_register_ops(). If any PPB's are present, the scan will
+** discover them and update the "secondary" and "subordinate"
+** fields in the pci_bus structure.
+**
+** Changes in the configuration *may* result in a different
+** bus number for each LBA depending on what firmware does.
+*/
+
+#define MODULE_NAME "LBA"
+
+/* non-postable I/O port space, densely packed */
+#define LBA_PORT_BASE (PCI_F_EXTEND | 0xfee00000UL)
+static void __iomem *astro_iop_base __read_mostly;
+
+static u32 lba_t32;
+
+/* lba flags */
+#define LBA_FLAG_SKIP_PROBE 0x10
+
+#define LBA_SKIP_PROBE(d) ((d)->flags & LBA_FLAG_SKIP_PROBE)
+
+
+/* Looks nice and keeps the compiler happy */
+#define LBA_DEV(d) ({ \
+ void *__pdata = d; \
+ BUG_ON(!__pdata); \
+ (struct lba_device *)__pdata; })
+
+/*
+** Only allow 8 subsidiary busses per LBA
+** Problem is the PCI bus numbering is globally shared.
+*/
+#define LBA_MAX_NUM_BUSES 8
+
+/************************************
+ * LBA register read and write support
+ *
+ * BE WARNED: register writes are posted.
+ * (ie follow writes which must reach HW with a read)
+ */
+#define READ_U8(addr) __raw_readb(addr)
+#define READ_U16(addr) __raw_readw(addr)
+#define READ_U32(addr) __raw_readl(addr)
+#define WRITE_U8(value, addr) __raw_writeb(value, addr)
+#define WRITE_U16(value, addr) __raw_writew(value, addr)
+#define WRITE_U32(value, addr) __raw_writel(value, addr)
+
+#define READ_REG8(addr) readb(addr)
+#define READ_REG16(addr) readw(addr)
+#define READ_REG32(addr) readl(addr)
+#define READ_REG64(addr) readq(addr)
+#define WRITE_REG8(value, addr) writeb(value, addr)
+#define WRITE_REG16(value, addr) writew(value, addr)
+#define WRITE_REG32(value, addr) writel(value, addr)
+
+
+#define LBA_CFG_TOK(bus,dfn) ((u32) ((bus)<<16 | (dfn)<<8))
+#define LBA_CFG_BUS(tok) ((u8) ((tok)>>16))
+#define LBA_CFG_DEV(tok) ((u8) ((tok)>>11) & 0x1f)
+#define LBA_CFG_FUNC(tok) ((u8) ((tok)>>8 ) & 0x7)
+
+
+/*
+** Extract LBA (Rope) number from HPA
+** REVISIT: 16 ropes for Stretch/Ike?
+*/
+#define ROPES_PER_IOC 8
+#define LBA_NUM(x) ((((unsigned long) x) >> 13) & (ROPES_PER_IOC-1))
+
+
+static void
+lba_dump_res(struct resource *r, int d)
+{
+ int i;
+
+ if (NULL == r)
+ return;
+
+ printk(KERN_DEBUG "(%p)", r->parent);
+ for (i = d; i ; --i) printk(" ");
+ printk(KERN_DEBUG "%p [%lx,%lx]/%lx\n", r,
+ (long)r->start, (long)r->end, r->flags);
+ lba_dump_res(r->child, d+2);
+ lba_dump_res(r->sibling, d);
+}
+
+
+/*
+** LBA rev 2.0, 2.1, 2.2, and 3.0 bus walks require a complex
+** workaround for cfg cycles:
+** -- preserve LBA state
+** -- prevent any DMA from occurring
+** -- turn on smart mode
+** -- probe with config writes before doing config reads
+** -- check ERROR_STATUS
+** -- clear ERROR_STATUS
+** -- restore LBA state
+**
+** The workaround is only used for device discovery.
+*/
+
+static int lba_device_present(u8 bus, u8 dfn, struct lba_device *d)
+{
+ u8 first_bus = d->hba.hba_bus->busn_res.start;
+ u8 last_sub_bus = d->hba.hba_bus->busn_res.end;
+
+ if ((bus < first_bus) ||
+ (bus > last_sub_bus) ||
+ ((bus - first_bus) >= LBA_MAX_NUM_BUSES)) {
+ return 0;
+ }
+
+ return 1;
+}
+
+
+
+#define LBA_CFG_SETUP(d, tok) { \
+ /* Save contents of error config register. */ \
+ error_config = READ_REG32(d->hba.base_addr + LBA_ERROR_CONFIG); \
+\
+ /* Save contents of status control register. */ \
+ status_control = READ_REG32(d->hba.base_addr + LBA_STAT_CTL); \
+\
+ /* For LBA rev 2.0, 2.1, 2.2, and 3.0, we must disable DMA \
+ ** arbitration for full bus walks. \
+ */ \
+ /* Save contents of arb mask register. */ \
+ arb_mask = READ_REG32(d->hba.base_addr + LBA_ARB_MASK); \
+\
+ /* \
+ * Turn off all device arbitration bits (i.e. everything \
+ * except arbitration enable bit). \
+ */ \
+ WRITE_REG32(0x1, d->hba.base_addr + LBA_ARB_MASK); \
+\
+ /* \
+ * Set the smart mode bit so that master aborts don't cause \
+ * LBA to go into PCI fatal mode (required). \
+ */ \
+ WRITE_REG32(error_config | LBA_SMART_MODE, d->hba.base_addr + LBA_ERROR_CONFIG); \
+}
+
+
+#define LBA_CFG_PROBE(d, tok) { \
+ /* \
+ * Setup Vendor ID write and read back the address register \
+ * to make sure that LBA is the bus master. \
+ */ \
+ WRITE_REG32(tok | PCI_VENDOR_ID, (d)->hba.base_addr + LBA_PCI_CFG_ADDR);\
+ /* \
+ * Read address register to ensure that LBA is the bus master, \
+ * which implies that DMA traffic has stopped when DMA arb is off. \
+ */ \
+ lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \
+ /* \
+ * Generate a cfg write cycle (will have no affect on \
+ * Vendor ID register since read-only). \
+ */ \
+ WRITE_REG32(~0, (d)->hba.base_addr + LBA_PCI_CFG_DATA); \
+ /* \
+ * Make sure write has completed before proceeding further, \
+ * i.e. before setting clear enable. \
+ */ \
+ lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \
+}
+
+
+/*
+ * HPREVISIT:
+ * -- Can't tell if config cycle got the error.
+ *
+ * OV bit is broken until rev 4.0, so can't use OV bit and
+ * LBA_ERROR_LOG_ADDR to tell if error belongs to config cycle.
+ *
+ * As of rev 4.0, no longer need the error check.
+ *
+ * -- Even if we could tell, we still want to return -1
+ * for **ANY** error (not just master abort).
+ *
+ * -- Only clear non-fatal errors (we don't want to bring
+ * LBA out of pci-fatal mode).
+ *
+ * Actually, there is still a race in which
+ * we could be clearing a fatal error. We will
+ * live with this during our initial bus walk
+ * until rev 4.0 (no driver activity during
+ * initial bus walk). The initial bus walk
+ * has race conditions concerning the use of
+ * smart mode as well.
+ */
+
+#define LBA_MASTER_ABORT_ERROR 0xc
+#define LBA_FATAL_ERROR 0x10
+
+#define LBA_CFG_MASTER_ABORT_CHECK(d, base, tok, error) { \
+ u32 error_status = 0; \
+ /* \
+ * Set clear enable (CE) bit. Unset by HW when new \
+ * errors are logged -- LBA HW ERS section 14.3.3). \
+ */ \
+ WRITE_REG32(status_control | CLEAR_ERRLOG_ENABLE, base + LBA_STAT_CTL); \
+ error_status = READ_REG32(base + LBA_ERROR_STATUS); \
+ if ((error_status & 0x1f) != 0) { \
+ /* \
+ * Fail the config read request. \
+ */ \
+ error = 1; \
+ if ((error_status & LBA_FATAL_ERROR) == 0) { \
+ /* \
+ * Clear error status (if fatal bit not set) by setting \
+ * clear error log bit (CL). \
+ */ \
+ WRITE_REG32(status_control | CLEAR_ERRLOG, base + LBA_STAT_CTL); \
+ } \
+ } \
+}
+
+#define LBA_CFG_TR4_ADDR_SETUP(d, addr) \
+ WRITE_REG32(((addr) & ~3), (d)->hba.base_addr + LBA_PCI_CFG_ADDR);
+
+#define LBA_CFG_ADDR_SETUP(d, addr) { \
+ WRITE_REG32(((addr) & ~3), (d)->hba.base_addr + LBA_PCI_CFG_ADDR); \
+ /* \
+ * Read address register to ensure that LBA is the bus master, \
+ * which implies that DMA traffic has stopped when DMA arb is off. \
+ */ \
+ lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \
+}
+
+
+#define LBA_CFG_RESTORE(d, base) { \
+ /* \
+ * Restore status control register (turn off clear enable). \
+ */ \
+ WRITE_REG32(status_control, base + LBA_STAT_CTL); \
+ /* \
+ * Restore error config register (turn off smart mode). \
+ */ \
+ WRITE_REG32(error_config, base + LBA_ERROR_CONFIG); \
+ /* \
+ * Restore arb mask register (reenables DMA arbitration). \
+ */ \
+ WRITE_REG32(arb_mask, base + LBA_ARB_MASK); \
+}
+
+
+
+static unsigned int
+lba_rd_cfg(struct lba_device *d, u32 tok, u8 reg, u32 size)
+{
+ u32 data = ~0U;
+ int error = 0;
+ u32 arb_mask = 0; /* used by LBA_CFG_SETUP/RESTORE */
+ u32 error_config = 0; /* used by LBA_CFG_SETUP/RESTORE */
+ u32 status_control = 0; /* used by LBA_CFG_SETUP/RESTORE */
+
+ LBA_CFG_SETUP(d, tok);
+ LBA_CFG_PROBE(d, tok);
+ LBA_CFG_MASTER_ABORT_CHECK(d, d->hba.base_addr, tok, error);
+ if (!error) {
+ void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
+
+ LBA_CFG_ADDR_SETUP(d, tok | reg);
+ switch (size) {
+ case 1: data = (u32) READ_REG8(data_reg + (reg & 3)); break;
+ case 2: data = (u32) READ_REG16(data_reg+ (reg & 2)); break;
+ case 4: data = READ_REG32(data_reg); break;
+ }
+ }
+ LBA_CFG_RESTORE(d, d->hba.base_addr);
+ return(data);
+}
+
+
+static int elroy_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data)
+{
+ struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
+ u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
+ u32 tok = LBA_CFG_TOK(local_bus, devfn);
+ void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
+
+ if ((pos > 255) || (devfn > 255))
+ return -EINVAL;
+
+/* FIXME: B2K/C3600 workaround is always use old method... */
+ /* if (!LBA_SKIP_PROBE(d)) */ {
+ /* original - Generate config cycle on broken elroy
+ with risk we will miss PCI bus errors. */
+ *data = lba_rd_cfg(d, tok, pos, size);
+ DBG_CFG("%s(%x+%2x) -> 0x%x (a)\n", __func__, tok, pos, *data);
+ return 0;
+ }
+
+ if (LBA_SKIP_PROBE(d) && !lba_device_present(bus->busn_res.start, devfn, d)) {
+ DBG_CFG("%s(%x+%2x) -> -1 (b)\n", __func__, tok, pos);
+ /* either don't want to look or know device isn't present. */
+ *data = ~0U;
+ return(0);
+ }
+
+ /* Basic Algorithm
+ ** Should only get here on fully working LBA rev.
+ ** This is how simple the code should have been.
+ */
+ LBA_CFG_ADDR_SETUP(d, tok | pos);
+ switch(size) {
+ case 1: *data = READ_REG8 (data_reg + (pos & 3)); break;
+ case 2: *data = READ_REG16(data_reg + (pos & 2)); break;
+ case 4: *data = READ_REG32(data_reg); break;
+ }
+ DBG_CFG("%s(%x+%2x) -> 0x%x (c)\n", __func__, tok, pos, *data);
+ return 0;
+}
+
+
+static void
+lba_wr_cfg(struct lba_device *d, u32 tok, u8 reg, u32 data, u32 size)
+{
+ int error = 0;
+ u32 arb_mask = 0;
+ u32 error_config = 0;
+ u32 status_control = 0;
+ void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
+
+ LBA_CFG_SETUP(d, tok);
+ LBA_CFG_ADDR_SETUP(d, tok | reg);
+ switch (size) {
+ case 1: WRITE_REG8 (data, data_reg + (reg & 3)); break;
+ case 2: WRITE_REG16(data, data_reg + (reg & 2)); break;
+ case 4: WRITE_REG32(data, data_reg); break;
+ }
+ LBA_CFG_MASTER_ABORT_CHECK(d, d->hba.base_addr, tok, error);
+ LBA_CFG_RESTORE(d, d->hba.base_addr);
+}
+
+
+/*
+ * LBA 4.0 config write code implements non-postable semantics
+ * by doing a read of CONFIG ADDR after the write.
+ */
+
+static int elroy_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 data)
+{
+ struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
+ u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
+ u32 tok = LBA_CFG_TOK(local_bus,devfn);
+
+ if ((pos > 255) || (devfn > 255))
+ return -EINVAL;
+
+ if (!LBA_SKIP_PROBE(d)) {
+ /* Original Workaround */
+ lba_wr_cfg(d, tok, pos, (u32) data, size);
+ DBG_CFG("%s(%x+%2x) = 0x%x (a)\n", __func__, tok, pos,data);
+ return 0;
+ }
+
+ if (LBA_SKIP_PROBE(d) && (!lba_device_present(bus->busn_res.start, devfn, d))) {
+ DBG_CFG("%s(%x+%2x) = 0x%x (b)\n", __func__, tok, pos,data);
+ return 1; /* New Workaround */
+ }
+
+ DBG_CFG("%s(%x+%2x) = 0x%x (c)\n", __func__, tok, pos, data);
+
+ /* Basic Algorithm */
+ LBA_CFG_ADDR_SETUP(d, tok | pos);
+ switch(size) {
+ case 1: WRITE_REG8 (data, d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 3));
+ break;
+ case 2: WRITE_REG16(data, d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 2));
+ break;
+ case 4: WRITE_REG32(data, d->hba.base_addr + LBA_PCI_CFG_DATA);
+ break;
+ }
+ /* flush posted write */
+ lba_t32 = READ_REG32(d->hba.base_addr + LBA_PCI_CFG_ADDR);
+ return 0;
+}
+
+
+static struct pci_ops elroy_cfg_ops = {
+ .read = elroy_cfg_read,
+ .write = elroy_cfg_write,
+};
+
+/*
+ * The mercury_cfg_ops are slightly misnamed; they're also used for Elroy
+ * TR4.0 as no additional bugs were found in this areea between Elroy and
+ * Mercury
+ */
+
+static int mercury_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data)
+{
+ struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
+ u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
+ u32 tok = LBA_CFG_TOK(local_bus, devfn);
+ void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
+
+ if ((pos > 255) || (devfn > 255))
+ return -EINVAL;
+
+ LBA_CFG_TR4_ADDR_SETUP(d, tok | pos);
+ switch(size) {
+ case 1:
+ *data = READ_REG8(data_reg + (pos & 3));
+ break;
+ case 2:
+ *data = READ_REG16(data_reg + (pos & 2));
+ break;
+ case 4:
+ *data = READ_REG32(data_reg); break;
+ break;
+ }
+
+ DBG_CFG("mercury_cfg_read(%x+%2x) -> 0x%x\n", tok, pos, *data);
+ return 0;
+}
+
+/*
+ * LBA 4.0 config write code implements non-postable semantics
+ * by doing a read of CONFIG ADDR after the write.
+ */
+
+static int mercury_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 data)
+{
+ struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge));
+ void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA;
+ u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start;
+ u32 tok = LBA_CFG_TOK(local_bus,devfn);
+
+ if ((pos > 255) || (devfn > 255))
+ return -EINVAL;
+
+ DBG_CFG("%s(%x+%2x) <- 0x%x (c)\n", __func__, tok, pos, data);
+
+ LBA_CFG_TR4_ADDR_SETUP(d, tok | pos);
+ switch(size) {
+ case 1:
+ WRITE_REG8 (data, data_reg + (pos & 3));
+ break;
+ case 2:
+ WRITE_REG16(data, data_reg + (pos & 2));
+ break;
+ case 4:
+ WRITE_REG32(data, data_reg);
+ break;
+ }
+
+ /* flush posted write */
+ lba_t32 = READ_U32(d->hba.base_addr + LBA_PCI_CFG_ADDR);
+ return 0;
+}
+
+static struct pci_ops mercury_cfg_ops = {
+ .read = mercury_cfg_read,
+ .write = mercury_cfg_write,
+};
+
+
+static void
+lba_bios_init(void)
+{
+ DBG(MODULE_NAME ": lba_bios_init\n");
+}
+
+
+#ifdef CONFIG_64BIT
+
+/*
+ * truncate_pat_collision: Deal with overlaps or outright collisions
+ * between PAT PDC reported ranges.
+ *
+ * Broken PA8800 firmware will report lmmio range that
+ * overlaps with CPU HPA. Just truncate the lmmio range.
+ *
+ * BEWARE: conflicts with this lmmio range may be an
+ * elmmio range which is pointing down another rope.
+ *
+ * FIXME: only deals with one collision per range...theoretically we
+ * could have several. Supporting more than one collision will get messy.
+ */
+static unsigned long
+truncate_pat_collision(struct resource *root, struct resource *new)
+{
+ unsigned long start = new->start;
+ unsigned long end = new->end;
+ struct resource *tmp = root->child;
+
+ if (end <= start || start < root->start || !tmp)
+ return 0;
+
+ /* find first overlap */
+ while (tmp && tmp->end < start)
+ tmp = tmp->sibling;
+
+ /* no entries overlap */
+ if (!tmp) return 0;
+
+ /* found one that starts behind the new one
+ ** Don't need to do anything.
+ */
+ if (tmp->start >= end) return 0;
+
+ if (tmp->start <= start) {
+ /* "front" of new one overlaps */
+ new->start = tmp->end + 1;
+
+ if (tmp->end >= end) {
+ /* AACCKK! totally overlaps! drop this range. */
+ return 1;
+ }
+ }
+
+ if (tmp->end < end ) {
+ /* "end" of new one overlaps */
+ new->end = tmp->start - 1;
+ }
+
+ printk(KERN_WARNING "LBA: Truncating lmmio_space [%lx/%lx] "
+ "to [%lx,%lx]\n",
+ start, end,
+ (long)new->start, (long)new->end );
+
+ return 0; /* truncation successful */
+}
+
+/*
+ * extend_lmmio_len: extend lmmio range to maximum length
+ *
+ * This is needed at least on C8000 systems to get the ATI FireGL card
+ * working. On other systems we will currently not extend the lmmio space.
+ */
+static unsigned long
+extend_lmmio_len(unsigned long start, unsigned long end, unsigned long lba_len)
+{
+ struct resource *tmp;
+
+ /* exit if not a C8000 */
+ if (boot_cpu_data.cpu_type < mako)
+ return end;
+
+ pr_debug("LMMIO mismatch: PAT length = 0x%lx, MASK register = 0x%lx\n",
+ end - start, lba_len);
+
+ lba_len = min(lba_len+1, 256UL*1024*1024); /* limit to 256 MB */
+
+ pr_debug("LBA: lmmio_space [0x%lx-0x%lx] - original\n", start, end);
+
+
+ end += lba_len;
+ if (end < start) /* fix overflow */
+ end = -1ULL;
+
+ pr_debug("LBA: lmmio_space [0x%lx-0x%lx] - current\n", start, end);
+
+ /* first overlap */
+ for (tmp = iomem_resource.child; tmp; tmp = tmp->sibling) {
+ pr_debug("LBA: testing %pR\n", tmp);
+ if (tmp->start == start)
+ continue; /* ignore ourself */
+ if (tmp->end < start)
+ continue;
+ if (tmp->start > end)
+ continue;
+ if (end >= tmp->start)
+ end = tmp->start - 1;
+ }
+
+ pr_info("LBA: lmmio_space [0x%lx-0x%lx] - new\n", start, end);
+
+ /* return new end */
+ return end;
+}
+
+#else
+#define truncate_pat_collision(r,n) (0)
+#endif
+
+static void pcibios_allocate_bridge_resources(struct pci_dev *dev)
+{
+ int idx;
+ struct resource *r;
+
+ for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
+ r = &dev->resource[idx];
+ if (!r->flags)
+ continue;
+ if (r->parent) /* Already allocated */
+ continue;
+ if (!r->start || pci_claim_bridge_resource(dev, idx) < 0) {
+ /*
+ * Something is wrong with the region.
+ * Invalidate the resource to prevent
+ * child resource allocations in this
+ * range.
+ */
+ r->start = r->end = 0;
+ r->flags = 0;
+ }
+ }
+}
+
+static void pcibios_allocate_bus_resources(struct pci_bus *bus)
+{
+ struct pci_bus *child;
+
+ /* Depth-First Search on bus tree */
+ if (bus->self)
+ pcibios_allocate_bridge_resources(bus->self);
+ list_for_each_entry(child, &bus->children, node)
+ pcibios_allocate_bus_resources(child);
+}
+
+
+/*
+** The algorithm is generic code.
+** But it needs to access local data structures to get the IRQ base.
+** Could make this a "pci_fixup_irq(bus, region)" but not sure
+** it's worth it.
+**
+** Called by do_pci_scan_bus() immediately after each PCI bus is walked.
+** Resources aren't allocated until recursive buswalk below HBA is completed.
+*/
+static void
+lba_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+#ifdef FBB_SUPPORT
+ u16 status;
+#endif
+ struct lba_device *ldev = LBA_DEV(parisc_walk_tree(bus->bridge));
+
+ DBG("lba_fixup_bus(0x%p) bus %d platform_data 0x%p\n",
+ bus, (int)bus->busn_res.start, bus->bridge->platform_data);
+
+ /*
+ ** Properly Setup MMIO resources for this bus.
+ ** pci_alloc_primary_bus() mangles this.
+ */
+ if (bus->parent) {
+ /* PCI-PCI Bridge */
+ pci_read_bridge_bases(bus);
+
+ /* check and allocate bridge resources */
+ pcibios_allocate_bus_resources(bus);
+ } else {
+ /* Host-PCI Bridge */
+ int err;
+
+ DBG("lba_fixup_bus() %s [%lx/%lx]/%lx\n",
+ ldev->hba.io_space.name,
+ ldev->hba.io_space.start, ldev->hba.io_space.end,
+ ldev->hba.io_space.flags);
+ DBG("lba_fixup_bus() %s [%lx/%lx]/%lx\n",
+ ldev->hba.lmmio_space.name,
+ ldev->hba.lmmio_space.start, ldev->hba.lmmio_space.end,
+ ldev->hba.lmmio_space.flags);
+
+ err = request_resource(&ioport_resource, &(ldev->hba.io_space));
+ if (err < 0) {
+ lba_dump_res(&ioport_resource, 2);
+ BUG();
+ }
+
+ if (ldev->hba.elmmio_space.flags) {
+ err = request_resource(&iomem_resource,
+ &(ldev->hba.elmmio_space));
+ if (err < 0) {
+
+ printk("FAILED: lba_fixup_bus() request for "
+ "elmmio_space [%lx/%lx]\n",
+ (long)ldev->hba.elmmio_space.start,
+ (long)ldev->hba.elmmio_space.end);
+
+ /* lba_dump_res(&iomem_resource, 2); */
+ /* BUG(); */
+ }
+ }
+
+ if (ldev->hba.lmmio_space.flags) {
+ err = request_resource(&iomem_resource, &(ldev->hba.lmmio_space));
+ if (err < 0) {
+ printk(KERN_ERR "FAILED: lba_fixup_bus() request for "
+ "lmmio_space [%lx/%lx]\n",
+ (long)ldev->hba.lmmio_space.start,
+ (long)ldev->hba.lmmio_space.end);
+ }
+ }
+
+#ifdef CONFIG_64BIT
+ /* GMMIO is distributed range. Every LBA/Rope gets part it. */
+ if (ldev->hba.gmmio_space.flags) {
+ err = request_resource(&iomem_resource, &(ldev->hba.gmmio_space));
+ if (err < 0) {
+ printk("FAILED: lba_fixup_bus() request for "
+ "gmmio_space [%lx/%lx]\n",
+ (long)ldev->hba.gmmio_space.start,
+ (long)ldev->hba.gmmio_space.end);
+ lba_dump_res(&iomem_resource, 2);
+ BUG();
+ }
+ }
+#endif
+
+ }
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ int i;
+
+ DBG("lba_fixup_bus() %s\n", pci_name(dev));
+
+ /* Virtualize Device/Bridge Resources. */
+ for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
+ struct resource *res = &dev->resource[i];
+
+ /* If resource not allocated - skip it */
+ if (!res->start)
+ continue;
+
+ /*
+ ** FIXME: this will result in whinging for devices
+ ** that share expansion ROMs (think quad tulip), but
+ ** isn't harmful.
+ */
+ pci_claim_resource(dev, i);
+ }
+
+#ifdef FBB_SUPPORT
+ /*
+ ** If one device does not support FBB transfers,
+ ** No one on the bus can be allowed to use them.
+ */
+ (void) pci_read_config_word(dev, PCI_STATUS, &status);
+ bus->bridge_ctl &= ~(status & PCI_STATUS_FAST_BACK);
+#endif
+
+ /*
+ ** P2PB's have no IRQs. ignore them.
+ */
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ pcibios_init_bridge(dev);
+ continue;
+ }
+
+ /* Adjust INTERRUPT_LINE for this dev */
+ iosapic_fixup_irq(ldev->iosapic_obj, dev);
+ }
+
+#ifdef FBB_SUPPORT
+/* FIXME/REVISIT - finish figuring out to set FBB on both
+** pci_setup_bridge() clobbers PCI_BRIDGE_CONTROL.
+** Can't fixup here anyway....garr...
+*/
+ if (fbb_enable) {
+ if (bus->parent) {
+ u8 control;
+ /* enable on PPB */
+ (void) pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &control);
+ (void) pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, control | PCI_STATUS_FAST_BACK);
+
+ } else {
+ /* enable on LBA */
+ }
+ fbb_enable = PCI_COMMAND_FAST_BACK;
+ }
+
+ /* Lastly enable FBB/PERR/SERR on all devices too */
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ (void) pci_read_config_word(dev, PCI_COMMAND, &status);
+ status |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR | fbb_enable;
+ (void) pci_write_config_word(dev, PCI_COMMAND, status);
+ }
+#endif
+}
+
+
+static struct pci_bios_ops lba_bios_ops = {
+ .init = lba_bios_init,
+ .fixup_bus = lba_fixup_bus,
+};
+
+
+
+
+/*******************************************************
+**
+** LBA Sprockets "I/O Port" Space Accessor Functions
+**
+** This set of accessor functions is intended for use with
+** "legacy firmware" (ie Sprockets on Allegro/Forte boxes).
+**
+** Many PCI devices don't require use of I/O port space (eg Tulip,
+** NCR720) since they export the same registers to both MMIO and
+** I/O port space. In general I/O port space is slower than
+** MMIO since drivers are designed so PIO writes can be posted.
+**
+********************************************************/
+
+#define LBA_PORT_IN(size, mask) \
+static u##size lba_astro_in##size (struct pci_hba_data *d, u16 addr) \
+{ \
+ u##size t; \
+ t = READ_REG##size(astro_iop_base + addr); \
+ DBG_PORT(" 0x%x\n", t); \
+ return (t); \
+}
+
+LBA_PORT_IN( 8, 3)
+LBA_PORT_IN(16, 2)
+LBA_PORT_IN(32, 0)
+
+
+
+/*
+** BUG X4107: Ordering broken - DMA RD return can bypass PIO WR
+**
+** Fixed in Elroy 2.2. The READ_U32(..., LBA_FUNC_ID) below is
+** guarantee non-postable completion semantics - not avoid X4107.
+** The READ_U32 only guarantees the write data gets to elroy but
+** out to the PCI bus. We can't read stuff from I/O port space
+** since we don't know what has side-effects. Attempting to read
+** from configuration space would be suicidal given the number of
+** bugs in that elroy functionality.
+**
+** Description:
+** DMA read results can improperly pass PIO writes (X4107). The
+** result of this bug is that if a processor modifies a location in
+** memory after having issued PIO writes, the PIO writes are not
+** guaranteed to be completed before a PCI device is allowed to see
+** the modified data in a DMA read.
+**
+** Note that IKE bug X3719 in TR1 IKEs will result in the same
+** symptom.
+**
+** Workaround:
+** The workaround for this bug is to always follow a PIO write with
+** a PIO read to the same bus before starting DMA on that PCI bus.
+**
+*/
+#define LBA_PORT_OUT(size, mask) \
+static void lba_astro_out##size (struct pci_hba_data *d, u16 addr, u##size val) \
+{ \
+ DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __func__, d, addr, val); \
+ WRITE_REG##size(val, astro_iop_base + addr); \
+ if (LBA_DEV(d)->hw_rev < 3) \
+ lba_t32 = READ_U32(d->base_addr + LBA_FUNC_ID); \
+}
+
+LBA_PORT_OUT( 8, 3)
+LBA_PORT_OUT(16, 2)
+LBA_PORT_OUT(32, 0)
+
+
+static struct pci_port_ops lba_astro_port_ops = {
+ .inb = lba_astro_in8,
+ .inw = lba_astro_in16,
+ .inl = lba_astro_in32,
+ .outb = lba_astro_out8,
+ .outw = lba_astro_out16,
+ .outl = lba_astro_out32
+};
+
+
+#ifdef CONFIG_64BIT
+#define PIOP_TO_GMMIO(lba, addr) \
+ ((lba)->iop_base + (((addr)&0xFFFC)<<10) + ((addr)&3))
+
+/*******************************************************
+**
+** LBA PAT "I/O Port" Space Accessor Functions
+**
+** This set of accessor functions is intended for use with
+** "PAT PDC" firmware (ie Prelude/Rhapsody/Piranha boxes).
+**
+** This uses the PIOP space located in the first 64MB of GMMIO.
+** Each rope gets a full 64*KB* (ie 4 bytes per page) this way.
+** bits 1:0 stay the same. bits 15:2 become 25:12.
+** Then add the base and we can generate an I/O Port cycle.
+********************************************************/
+#undef LBA_PORT_IN
+#define LBA_PORT_IN(size, mask) \
+static u##size lba_pat_in##size (struct pci_hba_data *l, u16 addr) \
+{ \
+ u##size t; \
+ DBG_PORT("%s(0x%p, 0x%x) ->", __func__, l, addr); \
+ t = READ_REG##size(PIOP_TO_GMMIO(LBA_DEV(l), addr)); \
+ DBG_PORT(" 0x%x\n", t); \
+ return (t); \
+}
+
+LBA_PORT_IN( 8, 3)
+LBA_PORT_IN(16, 2)
+LBA_PORT_IN(32, 0)
+
+
+#undef LBA_PORT_OUT
+#define LBA_PORT_OUT(size, mask) \
+static void lba_pat_out##size (struct pci_hba_data *l, u16 addr, u##size val) \
+{ \
+ void __iomem *where = PIOP_TO_GMMIO(LBA_DEV(l), addr); \
+ DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __func__, l, addr, val); \
+ WRITE_REG##size(val, where); \
+ /* flush the I/O down to the elroy at least */ \
+ lba_t32 = READ_U32(l->base_addr + LBA_FUNC_ID); \
+}
+
+LBA_PORT_OUT( 8, 3)
+LBA_PORT_OUT(16, 2)
+LBA_PORT_OUT(32, 0)
+
+
+static struct pci_port_ops lba_pat_port_ops = {
+ .inb = lba_pat_in8,
+ .inw = lba_pat_in16,
+ .inl = lba_pat_in32,
+ .outb = lba_pat_out8,
+ .outw = lba_pat_out16,
+ .outl = lba_pat_out32
+};
+
+
+
+/*
+** make range information from PDC available to PCI subsystem.
+** We make the PDC call here in order to get the PCI bus range
+** numbers. The rest will get forwarded in pcibios_fixup_bus().
+** We don't have a struct pci_bus assigned to us yet.
+*/
+static void
+lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
+{
+ unsigned long bytecnt;
+ long io_count;
+ long status; /* PDC return status */
+ long pa_count;
+ pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; /* PA_VIEW */
+ pdc_pat_cell_mod_maddr_block_t *io_pdc_cell; /* IO_VIEW */
+ int i;
+
+ pa_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
+ if (!pa_pdc_cell)
+ return;
+
+ io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
+ if (!io_pdc_cell) {
+ kfree(pa_pdc_cell);
+ return;
+ }
+
+ /* return cell module (IO view) */
+ status = pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
+ PA_VIEW, pa_pdc_cell);
+ pa_count = pa_pdc_cell->mod[1];
+
+ status |= pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
+ IO_VIEW, io_pdc_cell);
+ io_count = io_pdc_cell->mod[1];
+
+ /* We've already done this once for device discovery...*/
+ if (status != PDC_OK) {
+ panic("pdc_pat_cell_module() call failed for LBA!\n");
+ }
+
+ if (PAT_GET_ENTITY(pa_pdc_cell->mod_info) != PAT_ENTITY_LBA) {
+ panic("pdc_pat_cell_module() entity returned != PAT_ENTITY_LBA!\n");
+ }
+
+ /*
+ ** Inspect the resources PAT tells us about
+ */
+ for (i = 0; i < pa_count; i++) {
+ struct {
+ unsigned long type;
+ unsigned long start;
+ unsigned long end; /* aka finish */
+ } *p, *io;
+ struct resource *r;
+
+ p = (void *) &(pa_pdc_cell->mod[2+i*3]);
+ io = (void *) &(io_pdc_cell->mod[2+i*3]);
+
+ /* Convert the PAT range data to PCI "struct resource" */
+ switch(p->type & 0xff) {
+ case PAT_PBNUM:
+ lba_dev->hba.bus_num.start = p->start;
+ lba_dev->hba.bus_num.end = p->end;
+ lba_dev->hba.bus_num.flags = IORESOURCE_BUS;
+ break;
+
+ case PAT_LMMIO:
+ /* used to fix up pre-initialized MEM BARs */
+ if (!lba_dev->hba.lmmio_space.flags) {
+ unsigned long lba_len;
+
+ lba_len = ~READ_REG32(lba_dev->hba.base_addr
+ + LBA_LMMIO_MASK);
+ if ((p->end - p->start) != lba_len)
+ p->end = extend_lmmio_len(p->start,
+ p->end, lba_len);
+
+ sprintf(lba_dev->hba.lmmio_name,
+ "PCI%02x LMMIO",
+ (int)lba_dev->hba.bus_num.start);
+ lba_dev->hba.lmmio_space_offset = p->start -
+ io->start;
+ r = &lba_dev->hba.lmmio_space;
+ r->name = lba_dev->hba.lmmio_name;
+ } else if (!lba_dev->hba.elmmio_space.flags) {
+ sprintf(lba_dev->hba.elmmio_name,
+ "PCI%02x ELMMIO",
+ (int)lba_dev->hba.bus_num.start);
+ r = &lba_dev->hba.elmmio_space;
+ r->name = lba_dev->hba.elmmio_name;
+ } else {
+ printk(KERN_WARNING MODULE_NAME
+ " only supports 2 LMMIO resources!\n");
+ break;
+ }
+
+ r->start = p->start;
+ r->end = p->end;
+ r->flags = IORESOURCE_MEM;
+ r->parent = r->sibling = r->child = NULL;
+ break;
+
+ case PAT_GMMIO:
+ /* MMIO space > 4GB phys addr; for 64-bit BAR */
+ sprintf(lba_dev->hba.gmmio_name, "PCI%02x GMMIO",
+ (int)lba_dev->hba.bus_num.start);
+ r = &lba_dev->hba.gmmio_space;
+ r->name = lba_dev->hba.gmmio_name;
+ r->start = p->start;
+ r->end = p->end;
+ r->flags = IORESOURCE_MEM;
+ r->parent = r->sibling = r->child = NULL;
+ break;
+
+ case PAT_NPIOP:
+ printk(KERN_WARNING MODULE_NAME
+ " range[%d] : ignoring NPIOP (0x%lx)\n",
+ i, p->start);
+ break;
+
+ case PAT_PIOP:
+ /*
+ ** Postable I/O port space is per PCI host adapter.
+ ** base of 64MB PIOP region
+ */
+ lba_dev->iop_base = ioremap_nocache(p->start, 64 * 1024 * 1024);
+
+ sprintf(lba_dev->hba.io_name, "PCI%02x Ports",
+ (int)lba_dev->hba.bus_num.start);
+ r = &lba_dev->hba.io_space;
+ r->name = lba_dev->hba.io_name;
+ r->start = HBA_PORT_BASE(lba_dev->hba.hba_num);
+ r->end = r->start + HBA_PORT_SPACE_SIZE - 1;
+ r->flags = IORESOURCE_IO;
+ r->parent = r->sibling = r->child = NULL;
+ break;
+
+ default:
+ printk(KERN_WARNING MODULE_NAME
+ " range[%d] : unknown pat range type (0x%lx)\n",
+ i, p->type & 0xff);
+ break;
+ }
+ }
+
+ kfree(pa_pdc_cell);
+ kfree(io_pdc_cell);
+}
+#else
+/* keep compiler from complaining about missing declarations */
+#define lba_pat_port_ops lba_astro_port_ops
+#define lba_pat_resources(pa_dev, lba_dev)
+#endif /* CONFIG_64BIT */
+
+
+extern void sba_distributed_lmmio(struct parisc_device *, struct resource *);
+extern void sba_directed_lmmio(struct parisc_device *, struct resource *);
+
+
+static void
+lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
+{
+ struct resource *r;
+ int lba_num;
+
+ lba_dev->hba.lmmio_space_offset = PCI_F_EXTEND;
+
+ /*
+ ** With "legacy" firmware, the lowest byte of FW_SCRATCH
+ ** represents bus->secondary and the second byte represents
+ ** bus->subsidiary (i.e. highest PPB programmed by firmware).
+ ** PCI bus walk *should* end up with the same result.
+ ** FIXME: But we don't have sanity checks in PCI or LBA.
+ */
+ lba_num = READ_REG32(lba_dev->hba.base_addr + LBA_FW_SCRATCH);
+ r = &(lba_dev->hba.bus_num);
+ r->name = "LBA PCI Busses";
+ r->start = lba_num & 0xff;
+ r->end = (lba_num>>8) & 0xff;
+ r->flags = IORESOURCE_BUS;
+
+ /* Set up local PCI Bus resources - we don't need them for
+ ** Legacy boxes but it's nice to see in /proc/iomem.
+ */
+ r = &(lba_dev->hba.lmmio_space);
+ sprintf(lba_dev->hba.lmmio_name, "PCI%02x LMMIO",
+ (int)lba_dev->hba.bus_num.start);
+ r->name = lba_dev->hba.lmmio_name;
+
+#if 1
+ /* We want the CPU -> IO routing of addresses.
+ * The SBA BASE/MASK registers control CPU -> IO routing.
+ * Ask SBA what is routed to this rope/LBA.
+ */
+ sba_distributed_lmmio(pa_dev, r);
+#else
+ /*
+ * The LBA BASE/MASK registers control IO -> System routing.
+ *
+ * The following code works but doesn't get us what we want.
+ * Well, only because firmware (v5.0) on C3000 doesn't program
+ * the LBA BASE/MASE registers to be the exact inverse of
+ * the corresponding SBA registers. Other Astro/Pluto
+ * based platform firmware may do it right.
+ *
+ * Should someone want to mess with MSI, they may need to
+ * reprogram LBA BASE/MASK registers. Thus preserve the code
+ * below until MSI is known to work on C3000/A500/N4000/RP3440.
+ *
+ * Using the code below, /proc/iomem shows:
+ * ...
+ * f0000000-f0ffffff : PCI00 LMMIO
+ * f05d0000-f05d0000 : lcd_data
+ * f05d0008-f05d0008 : lcd_cmd
+ * f1000000-f1ffffff : PCI01 LMMIO
+ * f4000000-f4ffffff : PCI02 LMMIO
+ * f4000000-f4001fff : sym53c8xx
+ * f4002000-f4003fff : sym53c8xx
+ * f4004000-f40043ff : sym53c8xx
+ * f4005000-f40053ff : sym53c8xx
+ * f4007000-f4007fff : ohci_hcd
+ * f4008000-f40083ff : tulip
+ * f6000000-f6ffffff : PCI03 LMMIO
+ * f8000000-fbffffff : PCI00 ELMMIO
+ * fa100000-fa4fffff : stifb mmio
+ * fb000000-fb1fffff : stifb fb
+ *
+ * But everything listed under PCI02 actually lives under PCI00.
+ * This is clearly wrong.
+ *
+ * Asking SBA how things are routed tells the correct story:
+ * LMMIO_BASE/MASK/ROUTE f4000001 fc000000 00000000
+ * DIR0_BASE/MASK/ROUTE fa000001 fe000000 00000006
+ * DIR1_BASE/MASK/ROUTE f9000001 ff000000 00000004
+ * DIR2_BASE/MASK/ROUTE f0000000 fc000000 00000000
+ * DIR3_BASE/MASK/ROUTE f0000000 fc000000 00000000
+ *
+ * Which looks like this in /proc/iomem:
+ * f4000000-f47fffff : PCI00 LMMIO
+ * f4000000-f4001fff : sym53c8xx
+ * ...[deteled core devices - same as above]...
+ * f4008000-f40083ff : tulip
+ * f4800000-f4ffffff : PCI01 LMMIO
+ * f6000000-f67fffff : PCI02 LMMIO
+ * f7000000-f77fffff : PCI03 LMMIO
+ * f9000000-f9ffffff : PCI02 ELMMIO
+ * fa000000-fbffffff : PCI03 ELMMIO
+ * fa100000-fa4fffff : stifb mmio
+ * fb000000-fb1fffff : stifb fb
+ *
+ * ie all Built-in core are under now correctly under PCI00.
+ * The "PCI02 ELMMIO" directed range is for:
+ * +-[02]---03.0 3Dfx Interactive, Inc. Voodoo 2
+ *
+ * All is well now.
+ */
+ r->start = READ_REG32(lba_dev->hba.base_addr + LBA_LMMIO_BASE);
+ if (r->start & 1) {
+ unsigned long rsize;
+
+ r->flags = IORESOURCE_MEM;
+ /* mmio_mask also clears Enable bit */
+ r->start &= mmio_mask;
+ r->start = PCI_HOST_ADDR(HBA_DATA(lba_dev), r->start);
+ rsize = ~ READ_REG32(lba_dev->hba.base_addr + LBA_LMMIO_MASK);
+
+ /*
+ ** Each rope only gets part of the distributed range.
+ ** Adjust "window" for this rope.
+ */
+ rsize /= ROPES_PER_IOC;
+ r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start);
+ r->end = r->start + rsize;
+ } else {
+ r->end = r->start = 0; /* Not enabled. */
+ }
+#endif
+
+ /*
+ ** "Directed" ranges are used when the "distributed range" isn't
+ ** sufficient for all devices below a given LBA. Typically devices
+ ** like graphics cards or X25 may need a directed range when the
+ ** bus has multiple slots (ie multiple devices) or the device
+ ** needs more than the typical 4 or 8MB a distributed range offers.
+ **
+ ** The main reason for ignoring it now frigging complications.
+ ** Directed ranges may overlap (and have precedence) over
+ ** distributed ranges. Or a distributed range assigned to a unused
+ ** rope may be used by a directed range on a different rope.
+ ** Support for graphics devices may require fixing this
+ ** since they may be assigned a directed range which overlaps
+ ** an existing (but unused portion of) distributed range.
+ */
+ r = &(lba_dev->hba.elmmio_space);
+ sprintf(lba_dev->hba.elmmio_name, "PCI%02x ELMMIO",
+ (int)lba_dev->hba.bus_num.start);
+ r->name = lba_dev->hba.elmmio_name;
+
+#if 1
+ /* See comment which precedes call to sba_directed_lmmio() */
+ sba_directed_lmmio(pa_dev, r);
+#else
+ r->start = READ_REG32(lba_dev->hba.base_addr + LBA_ELMMIO_BASE);
+
+ if (r->start & 1) {
+ unsigned long rsize;
+ r->flags = IORESOURCE_MEM;
+ /* mmio_mask also clears Enable bit */
+ r->start &= mmio_mask;
+ r->start = PCI_HOST_ADDR(HBA_DATA(lba_dev), r->start);
+ rsize = READ_REG32(lba_dev->hba.base_addr + LBA_ELMMIO_MASK);
+ r->end = r->start + ~rsize;
+ }
+#endif
+
+ r = &(lba_dev->hba.io_space);
+ sprintf(lba_dev->hba.io_name, "PCI%02x Ports",
+ (int)lba_dev->hba.bus_num.start);
+ r->name = lba_dev->hba.io_name;
+ r->flags = IORESOURCE_IO;
+ r->start = READ_REG32(lba_dev->hba.base_addr + LBA_IOS_BASE) & ~1L;
+ r->end = r->start + (READ_REG32(lba_dev->hba.base_addr + LBA_IOS_MASK) ^ (HBA_PORT_SPACE_SIZE - 1));
+
+ /* Virtualize the I/O Port space ranges */
+ lba_num = HBA_PORT_BASE(lba_dev->hba.hba_num);
+ r->start |= lba_num;
+ r->end |= lba_num;
+}
+
+
+/**************************************************************************
+**
+** LBA initialization code (HW and SW)
+**
+** o identify LBA chip itself
+** o initialize LBA chip modes (HardFail)
+** o FIXME: initialize DMA hints for reasonable defaults
+** o enable configuration functions
+** o call pci_register_ops() to discover devs (fixup/fixup_bus get invoked)
+**
+**************************************************************************/
+
+static int __init
+lba_hw_init(struct lba_device *d)
+{
+ u32 stat;
+ u32 bus_reset; /* PDC_PAT_BUG */
+
+#if 0
+ printk(KERN_DEBUG "LBA %lx STAT_CTL %Lx ERROR_CFG %Lx STATUS %Lx DMA_CTL %Lx\n",
+ d->hba.base_addr,
+ READ_REG64(d->hba.base_addr + LBA_STAT_CTL),
+ READ_REG64(d->hba.base_addr + LBA_ERROR_CONFIG),
+ READ_REG64(d->hba.base_addr + LBA_ERROR_STATUS),
+ READ_REG64(d->hba.base_addr + LBA_DMA_CTL) );
+ printk(KERN_DEBUG " ARB mask %Lx pri %Lx mode %Lx mtlt %Lx\n",
+ READ_REG64(d->hba.base_addr + LBA_ARB_MASK),
+ READ_REG64(d->hba.base_addr + LBA_ARB_PRI),
+ READ_REG64(d->hba.base_addr + LBA_ARB_MODE),
+ READ_REG64(d->hba.base_addr + LBA_ARB_MTLT) );
+ printk(KERN_DEBUG " HINT cfg 0x%Lx\n",
+ READ_REG64(d->hba.base_addr + LBA_HINT_CFG));
+ printk(KERN_DEBUG " HINT reg ");
+ { int i;
+ for (i=LBA_HINT_BASE; i< (14*8 + LBA_HINT_BASE); i+=8)
+ printk(" %Lx", READ_REG64(d->hba.base_addr + i));
+ }
+ printk("\n");
+#endif /* DEBUG_LBA_PAT */
+
+#ifdef CONFIG_64BIT
+/*
+ * FIXME add support for PDC_PAT_IO "Get slot status" - OLAR support
+ * Only N-Class and up can really make use of Get slot status.
+ * maybe L-class too but I've never played with it there.
+ */
+#endif
+
+ /* PDC_PAT_BUG: exhibited in rev 40.48 on L2000 */
+ bus_reset = READ_REG32(d->hba.base_addr + LBA_STAT_CTL + 4) & 1;
+ if (bus_reset) {
+ printk(KERN_DEBUG "NOTICE: PCI bus reset still asserted! (clearing)\n");
+ }
+
+ stat = READ_REG32(d->hba.base_addr + LBA_ERROR_CONFIG);
+ if (stat & LBA_SMART_MODE) {
+ printk(KERN_DEBUG "NOTICE: LBA in SMART mode! (cleared)\n");
+ stat &= ~LBA_SMART_MODE;
+ WRITE_REG32(stat, d->hba.base_addr + LBA_ERROR_CONFIG);
+ }
+
+
+ /*
+ * Hard Fail vs. Soft Fail on PCI "Master Abort".
+ *
+ * "Master Abort" means the MMIO transaction timed out - usually due to
+ * the device not responding to an MMIO read. We would like HF to be
+ * enabled to find driver problems, though it means the system will
+ * crash with a HPMC.
+ *
+ * In SoftFail mode "~0L" is returned as a result of a timeout on the
+ * pci bus. This is like how PCI busses on x86 and most other
+ * architectures behave. In order to increase compatibility with
+ * existing (x86) PCI hardware and existing Linux drivers we enable
+ * Soft Faul mode on PA-RISC now too.
+ */
+ stat = READ_REG32(d->hba.base_addr + LBA_STAT_CTL);
+#if defined(ENABLE_HARDFAIL)
+ WRITE_REG32(stat | HF_ENABLE, d->hba.base_addr + LBA_STAT_CTL);
+#else
+ WRITE_REG32(stat & ~HF_ENABLE, d->hba.base_addr + LBA_STAT_CTL);
+#endif
+
+ /*
+ ** Writing a zero to STAT_CTL.rf (bit 0) will clear reset signal
+ ** if it's not already set. If we just cleared the PCI Bus Reset
+ ** signal, wait a bit for the PCI devices to recover and setup.
+ */
+ if (bus_reset)
+ mdelay(pci_post_reset_delay);
+
+ if (0 == READ_REG32(d->hba.base_addr + LBA_ARB_MASK)) {
+ /*
+ ** PDC_PAT_BUG: PDC rev 40.48 on L2000.
+ ** B2000/C3600/J6000 also have this problem?
+ **
+ ** Elroys with hot pluggable slots don't get configured
+ ** correctly if the slot is empty. ARB_MASK is set to 0
+ ** and we can't master transactions on the bus if it's
+ ** not at least one. 0x3 enables elroy and first slot.
+ */
+ printk(KERN_DEBUG "NOTICE: Enabling PCI Arbitration\n");
+ WRITE_REG32(0x3, d->hba.base_addr + LBA_ARB_MASK);
+ }
+
+ /*
+ ** FIXME: Hint registers are programmed with default hint
+ ** values by firmware. Hints should be sane even if we
+ ** can't reprogram them the way drivers want.
+ */
+ return 0;
+}
+
+/*
+ * Unfortunately, when firmware numbers busses, it doesn't take into account
+ * Cardbus bridges. So we have to renumber the busses to suit ourselves.
+ * Elroy/Mercury don't actually know what bus number they're attached to;
+ * we use bus 0 to indicate the directly attached bus and any other bus
+ * number will be taken care of by the PCI-PCI bridge.
+ */
+static unsigned int lba_next_bus = 0;
+
+/*
+ * Determine if lba should claim this chip (return 0) or not (return 1).
+ * If so, initialize the chip and tell other partners in crime they
+ * have work to do.
+ */
+static int __init
+lba_driver_probe(struct parisc_device *dev)
+{
+ struct lba_device *lba_dev;
+ LIST_HEAD(resources);
+ struct pci_bus *lba_bus;
+ struct pci_ops *cfg_ops;
+ u32 func_class;
+ void *tmp_obj;
+ char *version;
+ void __iomem *addr = ioremap_nocache(dev->hpa.start, 4096);
+ int max;
+
+ /* Read HW Rev First */
+ func_class = READ_REG32(addr + LBA_FCLASS);
+
+ if (IS_ELROY(dev)) {
+ func_class &= 0xf;
+ switch (func_class) {
+ case 0: version = "TR1.0"; break;
+ case 1: version = "TR2.0"; break;
+ case 2: version = "TR2.1"; break;
+ case 3: version = "TR2.2"; break;
+ case 4: version = "TR3.0"; break;
+ case 5: version = "TR4.0"; break;
+ default: version = "TR4+";
+ }
+
+ printk(KERN_INFO "Elroy version %s (0x%x) found at 0x%lx\n",
+ version, func_class & 0xf, (long)dev->hpa.start);
+
+ if (func_class < 2) {
+ printk(KERN_WARNING "Can't support LBA older than "
+ "TR2.1 - continuing under adversity.\n");
+ }
+
+#if 0
+/* Elroy TR4.0 should work with simple algorithm.
+ But it doesn't. Still missing something. *sigh*
+*/
+ if (func_class > 4) {
+ cfg_ops = &mercury_cfg_ops;
+ } else
+#endif
+ {
+ cfg_ops = &elroy_cfg_ops;
+ }
+
+ } else if (IS_MERCURY(dev) || IS_QUICKSILVER(dev)) {
+ int major, minor;
+
+ func_class &= 0xff;
+ major = func_class >> 4, minor = func_class & 0xf;
+
+ /* We could use one printk for both Elroy and Mercury,
+ * but for the mask for func_class.
+ */
+ printk(KERN_INFO "%s version TR%d.%d (0x%x) found at 0x%lx\n",
+ IS_MERCURY(dev) ? "Mercury" : "Quicksilver", major,
+ minor, func_class, (long)dev->hpa.start);
+
+ cfg_ops = &mercury_cfg_ops;
+ } else {
+ printk(KERN_ERR "Unknown LBA found at 0x%lx\n",
+ (long)dev->hpa.start);
+ return -ENODEV;
+ }
+
+ /* Tell I/O SAPIC driver we have a IRQ handler/region. */
+ tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE);
+
+ /* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't
+ ** have an IRT entry will get NULL back from iosapic code.
+ */
+
+ lba_dev = kzalloc(sizeof(struct lba_device), GFP_KERNEL);
+ if (!lba_dev) {
+ printk(KERN_ERR "lba_init_chip - couldn't alloc lba_device\n");
+ return(1);
+ }
+
+
+ /* ---------- First : initialize data we already have --------- */
+
+ lba_dev->hw_rev = func_class;
+ lba_dev->hba.base_addr = addr;
+ lba_dev->hba.dev = dev;
+ lba_dev->iosapic_obj = tmp_obj; /* save interrupt handle */
+ lba_dev->hba.iommu = sba_get_iommu(dev); /* get iommu data */
+ parisc_set_drvdata(dev, lba_dev);
+
+ /* ------------ Second : initialize common stuff ---------- */
+ pci_bios = &lba_bios_ops;
+ pcibios_register_hba(HBA_DATA(lba_dev));
+ spin_lock_init(&lba_dev->lba_lock);
+
+ if (lba_hw_init(lba_dev))
+ return(1);
+
+ /* ---------- Third : setup I/O Port and MMIO resources --------- */
+
+ if (is_pdc_pat()) {
+ /* PDC PAT firmware uses PIOP region of GMMIO space. */
+ pci_port = &lba_pat_port_ops;
+ /* Go ask PDC PAT what resources this LBA has */
+ lba_pat_resources(dev, lba_dev);
+ } else {
+ if (!astro_iop_base) {
+ /* Sprockets PDC uses NPIOP region */
+ astro_iop_base = ioremap_nocache(LBA_PORT_BASE, 64 * 1024);
+ pci_port = &lba_astro_port_ops;
+ }
+
+ /* Poke the chip a bit for /proc output */
+ lba_legacy_resources(dev, lba_dev);
+ }
+
+ if (lba_dev->hba.bus_num.start < lba_next_bus)
+ lba_dev->hba.bus_num.start = lba_next_bus;
+
+ /* Overlaps with elmmio can (and should) fail here.
+ * We will prune (or ignore) the distributed range.
+ *
+ * FIXME: SBA code should register all elmmio ranges first.
+ * that would take care of elmmio ranges routed
+ * to a different rope (already discovered) from
+ * getting registered *after* LBA code has already
+ * registered it's distributed lmmio range.
+ */
+ if (truncate_pat_collision(&iomem_resource,
+ &(lba_dev->hba.lmmio_space))) {
+ printk(KERN_WARNING "LBA: lmmio_space [%lx/%lx] duplicate!\n",
+ (long)lba_dev->hba.lmmio_space.start,
+ (long)lba_dev->hba.lmmio_space.end);
+ lba_dev->hba.lmmio_space.flags = 0;
+ }
+
+ pci_add_resource_offset(&resources, &lba_dev->hba.io_space,
+ HBA_PORT_BASE(lba_dev->hba.hba_num));
+ if (lba_dev->hba.elmmio_space.flags)
+ pci_add_resource_offset(&resources, &lba_dev->hba.elmmio_space,
+ lba_dev->hba.lmmio_space_offset);
+ if (lba_dev->hba.lmmio_space.flags)
+ pci_add_resource_offset(&resources, &lba_dev->hba.lmmio_space,
+ lba_dev->hba.lmmio_space_offset);
+ if (lba_dev->hba.gmmio_space.flags) {
+ /* Not registering GMMIO space - according to docs it's not
+ * even used on HP-UX. */
+ /* pci_add_resource(&resources, &lba_dev->hba.gmmio_space); */
+ }
+
+ pci_add_resource(&resources, &lba_dev->hba.bus_num);
+
+ dev->dev.platform_data = lba_dev;
+ lba_bus = lba_dev->hba.hba_bus =
+ pci_create_root_bus(&dev->dev, lba_dev->hba.bus_num.start,
+ cfg_ops, NULL, &resources);
+ if (!lba_bus) {
+ pci_free_resource_list(&resources);
+ return 0;
+ }
+
+ max = pci_scan_child_bus(lba_bus);
+
+ /* This is in lieu of calling pci_assign_unassigned_resources() */
+ if (is_pdc_pat()) {
+ /* assign resources to un-initialized devices */
+
+ DBG_PAT("LBA pci_bus_size_bridges()\n");
+ pci_bus_size_bridges(lba_bus);
+
+ DBG_PAT("LBA pci_bus_assign_resources()\n");
+ pci_bus_assign_resources(lba_bus);
+
+#ifdef DEBUG_LBA_PAT
+ DBG_PAT("\nLBA PIOP resource tree\n");
+ lba_dump_res(&lba_dev->hba.io_space, 2);
+ DBG_PAT("\nLBA LMMIO resource tree\n");
+ lba_dump_res(&lba_dev->hba.lmmio_space, 2);
+#endif
+ }
+
+ /*
+ ** Once PCI register ops has walked the bus, access to config
+ ** space is restricted. Avoids master aborts on config cycles.
+ ** Early LBA revs go fatal on *any* master abort.
+ */
+ if (cfg_ops == &elroy_cfg_ops) {
+ lba_dev->flags |= LBA_FLAG_SKIP_PROBE;
+ }
+
+ lba_next_bus = max + 1;
+ pci_bus_add_devices(lba_bus);
+
+ /* Whew! Finally done! Tell services we got this one covered. */
+ return 0;
+}
+
+static const struct parisc_device_id lba_tbl[] __initconst = {
+ { HPHW_BRIDGE, HVERSION_REV_ANY_ID, ELROY_HVERS, 0xa },
+ { HPHW_BRIDGE, HVERSION_REV_ANY_ID, MERCURY_HVERS, 0xa },
+ { HPHW_BRIDGE, HVERSION_REV_ANY_ID, QUICKSILVER_HVERS, 0xa },
+ { 0, }
+};
+
+static struct parisc_driver lba_driver __refdata = {
+ .name = MODULE_NAME,
+ .id_table = lba_tbl,
+ .probe = lba_driver_probe,
+};
+
+/*
+** One time initialization to let the world know the LBA was found.
+** Must be called exactly once before pci_init().
+*/
+void __init lba_init(void)
+{
+ register_parisc_driver(&lba_driver);
+}
+
+/*
+** Initialize the IBASE/IMASK registers for LBA (Elroy).
+** Only called from sba_iommu.c in order to route ranges (MMIO vs DMA).
+** sba_iommu is responsible for locking (none needed at init time).
+*/
+void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask)
+{
+ void __iomem * base_addr = ioremap_nocache(lba->hpa.start, 4096);
+
+ imask <<= 2; /* adjust for hints - 2 more bits */
+
+ /* Make sure we aren't trying to set bits that aren't writeable. */
+ WARN_ON((ibase & 0x001fffff) != 0);
+ WARN_ON((imask & 0x001fffff) != 0);
+
+ DBG("%s() ibase 0x%x imask 0x%x\n", __func__, ibase, imask);
+ WRITE_REG32( imask, base_addr + LBA_IMASK);
+ WRITE_REG32( ibase, base_addr + LBA_IBASE);
+ iounmap(base_addr);
+}
+
+
+/*
+ * The design of the Diva management card in rp34x0 machines (rp3410, rp3440)
+ * seems rushed, so that many built-in components simply don't work.
+ * The following quirks disable the serial AUX port and the built-in ATI RV100
+ * Radeon 7000 graphics card which both don't have any external connectors and
+ * thus are useless, and even worse, e.g. the AUX port occupies ttyS0 and as
+ * such makes those machines the only PARISC machines on which we can't use
+ * ttyS0 as boot console.
+ */
+static void quirk_diva_ati_card(struct pci_dev *dev)
+{
+ if (dev->subsystem_vendor != PCI_VENDOR_ID_HP ||
+ dev->subsystem_device != 0x1292)
+ return;
+
+ dev_info(&dev->dev, "Hiding Diva built-in ATI card");
+ dev->device = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QY,
+ quirk_diva_ati_card);
+
+static void quirk_diva_aux_disable(struct pci_dev *dev)
+{
+ if (dev->subsystem_vendor != PCI_VENDOR_ID_HP ||
+ dev->subsystem_device != 0x1291)
+ return;
+
+ dev_info(&dev->dev, "Hiding Diva built-in AUX serial device");
+ dev->device = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
+ quirk_diva_aux_disable);