v4.19.13 snapshot.
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
new file mode 100644
index 0000000..5c42cf8
--- /dev/null
+++ b/drivers/net/usb/cdc_ether.c
@@ -0,0 +1,945 @@
+/*
+ * CDC Ethernet based networking peripherals
+ * Copyright (C) 2003-2005 by David Brownell
+ * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+#if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
+
+static int is_rndis(struct usb_interface_descriptor *desc)
+{
+ return (desc->bInterfaceClass == USB_CLASS_COMM &&
+ desc->bInterfaceSubClass == 2 &&
+ desc->bInterfaceProtocol == 0xff);
+}
+
+static int is_activesync(struct usb_interface_descriptor *desc)
+{
+ return (desc->bInterfaceClass == USB_CLASS_MISC &&
+ desc->bInterfaceSubClass == 1 &&
+ desc->bInterfaceProtocol == 1);
+}
+
+static int is_wireless_rndis(struct usb_interface_descriptor *desc)
+{
+ return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
+ desc->bInterfaceSubClass == 1 &&
+ desc->bInterfaceProtocol == 3);
+}
+
+static int is_novatel_rndis(struct usb_interface_descriptor *desc)
+{
+ return (desc->bInterfaceClass == USB_CLASS_MISC &&
+ desc->bInterfaceSubClass == 4 &&
+ desc->bInterfaceProtocol == 1);
+}
+
+#else
+
+#define is_rndis(desc) 0
+#define is_activesync(desc) 0
+#define is_wireless_rndis(desc) 0
+#define is_novatel_rndis(desc) 0
+
+#endif
+
+static const u8 mbm_guid[16] = {
+ 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
+ 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
+};
+
+static void usbnet_cdc_update_filter(struct usbnet *dev)
+{
+ struct cdc_state *info = (void *) &dev->data;
+ struct usb_interface *intf = info->control;
+ struct net_device *net = dev->net;
+
+ u16 cdc_filter = USB_CDC_PACKET_TYPE_DIRECTED
+ | USB_CDC_PACKET_TYPE_BROADCAST;
+
+ /* filtering on the device is an optional feature and not worth
+ * the hassle so we just roughly care about snooping and if any
+ * multicast is requested, we take every multicast
+ */
+ if (net->flags & IFF_PROMISC)
+ cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
+ if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI))
+ cdc_filter |= USB_CDC_PACKET_TYPE_ALL_MULTICAST;
+
+ usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ USB_CDC_SET_ETHERNET_PACKET_FILTER,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ cdc_filter,
+ intf->cur_altsetting->desc.bInterfaceNumber,
+ NULL,
+ 0,
+ USB_CTRL_SET_TIMEOUT
+ );
+}
+
+/* probes control interface, claims data interface, collects the bulk
+ * endpoints, activates data interface (if needed), maybe sets MTU.
+ * all pure cdc, except for certain firmware workarounds, and knowing
+ * that rndis uses one different rule.
+ */
+int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ u8 *buf = intf->cur_altsetting->extra;
+ int len = intf->cur_altsetting->extralen;
+ struct usb_interface_descriptor *d;
+ struct cdc_state *info = (void *) &dev->data;
+ int status;
+ int rndis;
+ bool android_rndis_quirk = false;
+ struct usb_driver *driver = driver_of(intf);
+ struct usb_cdc_parsed_header header;
+
+ if (sizeof(dev->data) < sizeof(*info))
+ return -EDOM;
+
+ /* expect strict spec conformance for the descriptors, but
+ * cope with firmware which stores them in the wrong place
+ */
+ if (len == 0 && dev->udev->actconfig->extralen) {
+ /* Motorola SB4100 (and others: Brad Hards says it's
+ * from a Broadcom design) put CDC descriptors here
+ */
+ buf = dev->udev->actconfig->extra;
+ len = dev->udev->actconfig->extralen;
+ dev_dbg(&intf->dev, "CDC descriptors on config\n");
+ }
+
+ /* Maybe CDC descriptors are after the endpoint? This bug has
+ * been seen on some 2Wire Inc RNDIS-ish products.
+ */
+ if (len == 0) {
+ struct usb_host_endpoint *hep;
+
+ hep = intf->cur_altsetting->endpoint;
+ if (hep) {
+ buf = hep->extra;
+ len = hep->extralen;
+ }
+ if (len)
+ dev_dbg(&intf->dev,
+ "CDC descriptors on endpoint\n");
+ }
+
+ /* this assumes that if there's a non-RNDIS vendor variant
+ * of cdc-acm, it'll fail RNDIS requests cleanly.
+ */
+ rndis = (is_rndis(&intf->cur_altsetting->desc) ||
+ is_activesync(&intf->cur_altsetting->desc) ||
+ is_wireless_rndis(&intf->cur_altsetting->desc) ||
+ is_novatel_rndis(&intf->cur_altsetting->desc));
+
+ memset(info, 0, sizeof(*info));
+ info->control = intf;
+
+ cdc_parse_cdc_header(&header, intf, buf, len);
+
+ info->u = header.usb_cdc_union_desc;
+ info->header = header.usb_cdc_header_desc;
+ info->ether = header.usb_cdc_ether_desc;
+ if (!info->u) {
+ if (rndis)
+ goto skip;
+ else /* in that case a quirk is mandatory */
+ goto bad_desc;
+ }
+ /* we need a master/control interface (what we're
+ * probed with) and a slave/data interface; union
+ * descriptors sort this all out.
+ */
+ info->control = usb_ifnum_to_if(dev->udev,
+ info->u->bMasterInterface0);
+ info->data = usb_ifnum_to_if(dev->udev,
+ info->u->bSlaveInterface0);
+ if (!info->control || !info->data) {
+ dev_dbg(&intf->dev,
+ "master #%u/%p slave #%u/%p\n",
+ info->u->bMasterInterface0,
+ info->control,
+ info->u->bSlaveInterface0,
+ info->data);
+ /* fall back to hard-wiring for RNDIS */
+ if (rndis) {
+ android_rndis_quirk = true;
+ goto skip;
+ }
+ goto bad_desc;
+ }
+ if (info->control != intf) {
+ dev_dbg(&intf->dev, "bogus CDC Union\n");
+ /* Ambit USB Cable Modem (and maybe others)
+ * interchanges master and slave interface.
+ */
+ if (info->data == intf) {
+ info->data = info->control;
+ info->control = intf;
+ } else
+ goto bad_desc;
+ }
+
+ /* some devices merge these - skip class check */
+ if (info->control == info->data)
+ goto skip;
+
+ /* a data interface altsetting does the real i/o */
+ d = &info->data->cur_altsetting->desc;
+ if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
+ dev_dbg(&intf->dev, "slave class %u\n",
+ d->bInterfaceClass);
+ goto bad_desc;
+ }
+skip:
+ if ( rndis &&
+ header.usb_cdc_acm_descriptor &&
+ header.usb_cdc_acm_descriptor->bmCapabilities) {
+ dev_dbg(&intf->dev,
+ "ACM capabilities %02x, not really RNDIS?\n",
+ header.usb_cdc_acm_descriptor->bmCapabilities);
+ goto bad_desc;
+ }
+
+ if (header.usb_cdc_ether_desc && info->ether->wMaxSegmentSize) {
+ dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize);
+ /* because of Zaurus, we may be ignoring the host
+ * side link address we were given.
+ */
+ }
+
+ if (header.usb_cdc_mdlm_desc &&
+ memcmp(header.usb_cdc_mdlm_desc->bGUID, mbm_guid, 16)) {
+ dev_dbg(&intf->dev, "GUID doesn't match\n");
+ goto bad_desc;
+ }
+
+ if (header.usb_cdc_mdlm_detail_desc &&
+ header.usb_cdc_mdlm_detail_desc->bLength <
+ (sizeof(struct usb_cdc_mdlm_detail_desc) + 1)) {
+ dev_dbg(&intf->dev, "Descriptor too short\n");
+ goto bad_desc;
+ }
+
+
+
+ /* Microsoft ActiveSync based and some regular RNDIS devices lack the
+ * CDC descriptors, so we'll hard-wire the interfaces and not check
+ * for descriptors.
+ *
+ * Some Android RNDIS devices have a CDC Union descriptor pointing
+ * to non-existing interfaces. Ignore that and attempt the same
+ * hard-wired 0 and 1 interfaces.
+ */
+ if (rndis && (!info->u || android_rndis_quirk)) {
+ info->control = usb_ifnum_to_if(dev->udev, 0);
+ info->data = usb_ifnum_to_if(dev->udev, 1);
+ if (!info->control || !info->data || info->control != intf) {
+ dev_dbg(&intf->dev,
+ "rndis: master #0/%p slave #1/%p\n",
+ info->control,
+ info->data);
+ goto bad_desc;
+ }
+
+ } else if (!info->header || (!rndis && !info->ether)) {
+ dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
+ info->header ? "" : "header ",
+ info->u ? "" : "union ",
+ info->ether ? "" : "ether ");
+ goto bad_desc;
+ }
+
+ /* claim data interface and set it up ... with side effects.
+ * network traffic can't flow until an altsetting is enabled.
+ */
+ if (info->data != info->control) {
+ status = usb_driver_claim_interface(driver, info->data, dev);
+ if (status < 0)
+ return status;
+ }
+ status = usbnet_get_endpoints(dev, info->data);
+ if (status < 0) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->data, NULL);
+ if (info->data != info->control)
+ usb_driver_release_interface(driver, info->data);
+ return status;
+ }
+
+ /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
+ if (info->data != info->control)
+ dev->status = NULL;
+ if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
+ struct usb_endpoint_descriptor *desc;
+
+ dev->status = &info->control->cur_altsetting->endpoint [0];
+ desc = &dev->status->desc;
+ if (!usb_endpoint_is_int_in(desc) ||
+ (le16_to_cpu(desc->wMaxPacketSize)
+ < sizeof(struct usb_cdc_notification)) ||
+ !desc->bInterval) {
+ dev_dbg(&intf->dev, "bad notification endpoint\n");
+ dev->status = NULL;
+ }
+ }
+ if (rndis && !dev->status) {
+ dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver, info->data);
+ return -ENODEV;
+ }
+
+ return 0;
+
+bad_desc:
+ dev_info(&dev->udev->dev, "bad CDC descriptors\n");
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
+
+
+/* like usbnet_generic_cdc_bind() but handles filter initialization
+ * correctly
+ */
+int usbnet_ether_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int rv;
+
+ rv = usbnet_generic_cdc_bind(dev, intf);
+ if (rv < 0)
+ goto bail_out;
+
+ /* Some devices don't initialise properly. In particular
+ * the packet filter is not reset. There are devices that
+ * don't do reset all the way. So the packet filter should
+ * be set to a sane initial value.
+ */
+ usbnet_cdc_update_filter(dev);
+
+bail_out:
+ return rv;
+}
+EXPORT_SYMBOL_GPL(usbnet_ether_cdc_bind);
+
+void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct cdc_state *info = (void *) &dev->data;
+ struct usb_driver *driver = driver_of(intf);
+
+ /* combined interface - nothing to do */
+ if (info->data == info->control)
+ return;
+
+ /* disconnect master --> disconnect slave */
+ if (intf == info->control && info->data) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver, info->data);
+ info->data = NULL;
+ }
+
+ /* and vice versa (just in case) */
+ else if (intf == info->data && info->control) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->control, NULL);
+ usb_driver_release_interface(driver, info->control);
+ info->control = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
+
+/* Communications Device Class, Ethernet Control model
+ *
+ * Takes two interfaces. The DATA interface is inactive till an altsetting
+ * is selected. Configuration data includes class descriptors. There's
+ * an optional status endpoint on the control interface.
+ *
+ * This should interop with whatever the 2.4 "CDCEther.c" driver
+ * (by Brad Hards) talked with, with more functionality.
+ */
+
+static void dumpspeed(struct usbnet *dev, __le32 *speeds)
+{
+ netif_info(dev, timer, dev->net,
+ "link speeds: %u kbps up, %u kbps down\n",
+ __le32_to_cpu(speeds[0]) / 1000,
+ __le32_to_cpu(speeds[1]) / 1000);
+}
+
+void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
+{
+ struct usb_cdc_notification *event;
+
+ if (urb->actual_length < sizeof(*event))
+ return;
+
+ /* SPEED_CHANGE can get split into two 8-byte packets */
+ if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
+ dumpspeed(dev, (__le32 *) urb->transfer_buffer);
+ return;
+ }
+
+ event = urb->transfer_buffer;
+ switch (event->bNotificationType) {
+ case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+ netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
+ event->wValue ? "on" : "off");
+ usbnet_link_change(dev, !!event->wValue, 0);
+ break;
+ case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
+ netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
+ urb->actual_length);
+ if (urb->actual_length != (sizeof(*event) + 8))
+ set_bit(EVENT_STS_SPLIT, &dev->flags);
+ else
+ dumpspeed(dev, (__le32 *) &event[1]);
+ break;
+ /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
+ * but there are no standard formats for the response data.
+ */
+ default:
+ netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
+ event->bNotificationType);
+ break;
+ }
+}
+EXPORT_SYMBOL_GPL(usbnet_cdc_status);
+
+int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int status;
+ struct cdc_state *info = (void *) &dev->data;
+
+ BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
+ < sizeof(struct cdc_state)));
+
+ status = usbnet_ether_cdc_bind(dev, intf);
+ if (status < 0)
+ return status;
+
+ status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
+ if (status < 0) {
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver_of(intf), info->data);
+ return status;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
+
+static int usbnet_cdc_zte_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int status = usbnet_cdc_bind(dev, intf);
+
+ if (!status && (dev->net->dev_addr[0] & 0x02))
+ eth_hw_addr_random(dev->net);
+
+ return status;
+}
+
+/* Make sure packets have correct destination MAC address
+ *
+ * A firmware bug observed on some devices (ZTE MF823/831/910) is that the
+ * device sends packets with a static, bogus, random MAC address (event if
+ * device MAC address has been updated). Always set MAC address to that of the
+ * device.
+ */
+static int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ if (skb->len < ETH_HLEN || !(skb->data[0] & 0x02))
+ return 1;
+
+ skb_reset_mac_header(skb);
+ ether_addr_copy(eth_hdr(skb)->h_dest, dev->net->dev_addr);
+
+ return 1;
+}
+
+/* Ensure correct link state
+ *
+ * Some devices (ZTE MF823/831/910) export two carrier on notifications when
+ * connected. This causes the link state to be incorrect. Work around this by
+ * always setting the state to off, then on.
+ */
+static void usbnet_cdc_zte_status(struct usbnet *dev, struct urb *urb)
+{
+ struct usb_cdc_notification *event;
+
+ if (urb->actual_length < sizeof(*event))
+ return;
+
+ event = urb->transfer_buffer;
+
+ if (event->bNotificationType != USB_CDC_NOTIFY_NETWORK_CONNECTION) {
+ usbnet_cdc_status(dev, urb);
+ return;
+ }
+
+ netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
+ event->wValue ? "on" : "off");
+
+ if (event->wValue &&
+ netif_carrier_ok(dev->net))
+ netif_carrier_off(dev->net);
+
+ usbnet_link_change(dev, !!event->wValue, 0);
+}
+
+static const struct driver_info cdc_info = {
+ .description = "CDC Ethernet Device",
+ .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
+ .bind = usbnet_cdc_bind,
+ .unbind = usbnet_cdc_unbind,
+ .status = usbnet_cdc_status,
+ .set_rx_mode = usbnet_cdc_update_filter,
+ .manage_power = usbnet_manage_power,
+};
+
+static const struct driver_info zte_cdc_info = {
+ .description = "ZTE CDC Ethernet Device",
+ .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
+ .bind = usbnet_cdc_zte_bind,
+ .unbind = usbnet_cdc_unbind,
+ .status = usbnet_cdc_zte_status,
+ .set_rx_mode = usbnet_cdc_update_filter,
+ .manage_power = usbnet_manage_power,
+ .rx_fixup = usbnet_cdc_zte_rx_fixup,
+};
+
+static const struct driver_info wwan_info = {
+ .description = "Mobile Broadband Network Device",
+ .flags = FLAG_WWAN,
+ .bind = usbnet_cdc_bind,
+ .unbind = usbnet_cdc_unbind,
+ .status = usbnet_cdc_status,
+ .set_rx_mode = usbnet_cdc_update_filter,
+ .manage_power = usbnet_manage_power,
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define HUAWEI_VENDOR_ID 0x12D1
+#define NOVATEL_VENDOR_ID 0x1410
+#define ZTE_VENDOR_ID 0x19D2
+#define DELL_VENDOR_ID 0x413C
+#define REALTEK_VENDOR_ID 0x0bda
+#define SAMSUNG_VENDOR_ID 0x04e8
+#define LENOVO_VENDOR_ID 0x17ef
+#define LINKSYS_VENDOR_ID 0x13b1
+#define NVIDIA_VENDOR_ID 0x0955
+#define HP_VENDOR_ID 0x03f0
+#define MICROSOFT_VENDOR_ID 0x045e
+#define UBLOX_VENDOR_ID 0x1546
+#define TPLINK_VENDOR_ID 0x2357
+
+static const struct usb_device_id products[] = {
+/* BLACKLIST !!
+ *
+ * First blacklist any products that are egregiously nonconformant
+ * with the CDC Ethernet specs. Minor braindamage we cope with; when
+ * they're not even trying, needing a separate driver is only the first
+ * of the differences to show up.
+ */
+
+#define ZAURUS_MASTER_INTERFACE \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
+/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
+ * wire-incompatible with true CDC Ethernet implementations.
+ * (And, it seems, needlessly so...)
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8004,
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+},
+
+/* PXA-25x based Sharp Zaurii. Note that it seems some of these
+ * (later models especially) may have shipped only with firmware
+ * advertising false "CDC MDLM" compatibility ... but we're not
+ * clear which models did that, so for now let's assume the worst.
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8005, /* A-300 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8006, /* B-500/SL-5600 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8007, /* C-700 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9031, /* C-750 C-760 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9032, /* SL-6000 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ /* reported with some C860 units */
+ .idProduct = 0x9050, /* C-860 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+},
+
+/* Olympus has some models with a Zaurus-compatible option.
+ * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x07B4,
+ .idProduct = 0x0F02, /* R-1000 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+},
+
+/* LG Electronics VL600 wants additional headers on every frame */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Novatel USB551L and MC551 - handled by qmi_wwan */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Novatel E362 - handled by qmi_wwan */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Novatel Expedite E371 - handled by qmi_wwan */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* HP lt2523 (Novatel E371) - handled by qmi_wwan */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(HP_VENDOR_ID, 0x421d, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* AnyDATA ADU960S - handled by qmi_wwan */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Huawei E1820 - handled by qmi_wwan */
+{
+ USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
+ .driver_info = 0,
+},
+
+/* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Samsung USB Ethernet Adapters */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+#if IS_ENABLED(CONFIG_USB_RTL8152)
+/* Linksys USB3GIGV1 Ethernet Adapter */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(LINKSYS_VENDOR_ID, 0x0041, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+#endif
+
+/* ThinkPad USB-C Dock (based on Realtek RTL8153) */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3062, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* ThinkPad Thunderbolt 3 Dock (based on Realtek RTL8153) */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3069, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7205, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Lenovo USB C to Ethernet Adapter (based on Realtek RTL8153) */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x720c, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Lenovo USB-C Travel Hub (based on Realtek RTL8153) */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7214, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* NVIDIA Tegra USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(NVIDIA_VENDOR_ID, 0x09ff, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Microsoft Surface 2 dock (based on Realtek RTL8152) */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07ab, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* Microsoft Surface 3 dock (based on Realtek RTL8153) */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07c6, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+ /* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, 0x0601, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
+/* WHITELIST!!!
+ *
+ * CDC Ether uses two interfaces, not necessarily consecutive.
+ * We match the main interface, ignoring the optional device
+ * class so we could handle devices that aren't exclusively
+ * CDC ether.
+ *
+ * NOTE: this match must come AFTER entries blacklisting devices
+ * because of bugs/quirks in a given product (like Zaurus, above).
+ */
+{
+ /* ZTE (Vodafone) K3805-Z */
+ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+}, {
+ /* ZTE (Vodafone) K3806-Z */
+ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+}, {
+ /* ZTE (Vodafone) K4510-Z */
+ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+}, {
+ /* ZTE (Vodafone) K3770-Z */
+ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+}, {
+ /* ZTE (Vodafone) K3772-Z */
+ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+}, {
+ /* Telit modules */
+ USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = (kernel_ulong_t) &wwan_info,
+}, {
+ /* Dell DW5580 modules */
+ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = (kernel_ulong_t)&wwan_info,
+}, {
+ /* Huawei ME906 and ME909 */
+ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x15c1, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+}, {
+ /* ZTE modules */
+ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&zte_cdc_info,
+}, {
+ /* U-blox TOBY-L2 */
+ USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1143, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+}, {
+ /* U-blox SARA-U2 */
+ USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1104, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+}, {
+ /* Cinterion PLS8 modem by GEMALTO */
+ USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0061, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+}, {
+ /* Cinterion AHS3 modem by GEMALTO */
+ USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0055, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+}, {
+ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
+
+}, {
+ /* Various Huawei modems with a network port like the UMG1831 */
+ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, 255),
+ .driver_info = (unsigned long)&wwan_info,
+},
+ { }, /* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver cdc_driver = {
+ .name = "cdc_ether",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .reset_resume = usbnet_resume,
+ .supports_autosuspend = 1,
+ .disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(cdc_driver);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("USB CDC Ethernet devices");
+MODULE_LICENSE("GPL");