v4.19.13 snapshot.
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
new file mode 100644
index 0000000..c14b254
--- /dev/null
+++ b/drivers/net/phy/lxt.c
@@ -0,0 +1,300 @@
+/*
+ * drivers/net/phy/lxt.c
+ *
+ * Driver for Intel LXT PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/uaccess.h>
+
+/* The Level one LXT970 is used by many boards */
+
+#define MII_LXT970_IER 17 /* Interrupt Enable Register */
+
+#define MII_LXT970_IER_IEN 0x0002
+
+#define MII_LXT970_ISR 18 /* Interrupt Status Register */
+
+#define MII_LXT970_CONFIG 19 /* Configuration Register */
+
+/* ------------------------------------------------------------------------- */
+/* The Level one LXT971 is used on some of my custom boards */
+
+/* register definitions for the 971 */
+#define MII_LXT971_IER 18 /* Interrupt Enable Register */
+#define MII_LXT971_IER_IEN 0x00f2
+
+#define MII_LXT971_ISR 19 /* Interrupt Status Register */
+
+/* register definitions for the 973 */
+#define MII_LXT973_PCR 16 /* Port Configuration Register */
+#define PCR_FIBER_SELECT 1
+
+MODULE_DESCRIPTION("Intel LXT PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int lxt970_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, MII_BMSR);
+
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_LXT970_ISR);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int lxt970_config_intr(struct phy_device *phydev)
+{
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ return phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN);
+ else
+ return phy_write(phydev, MII_LXT970_IER, 0);
+}
+
+static int lxt970_config_init(struct phy_device *phydev)
+{
+ return phy_write(phydev, MII_LXT970_CONFIG, 0);
+}
+
+
+static int lxt971_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_LXT971_ISR);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int lxt971_config_intr(struct phy_device *phydev)
+{
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ return phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN);
+ else
+ return phy_write(phydev, MII_LXT971_IER, 0);
+}
+
+/*
+ * A2 version of LXT973 chip has an ERRATA: it randomly return the contents
+ * of the previous even register when you read a odd register regularly
+ */
+
+static int lxt973a2_update_link(struct phy_device *phydev)
+{
+ int status;
+ int control;
+ int retry = 8; /* we try 8 times */
+
+ /* Do a fake read */
+ status = phy_read(phydev, MII_BMSR);
+
+ if (status < 0)
+ return status;
+
+ control = phy_read(phydev, MII_BMCR);
+ if (control < 0)
+ return control;
+
+ do {
+ /* Read link and autonegotiation status */
+ status = phy_read(phydev, MII_BMSR);
+ } while (status >= 0 && retry-- && status == control);
+
+ if (status < 0)
+ return status;
+
+ if ((status & BMSR_LSTATUS) == 0)
+ phydev->link = 0;
+ else
+ phydev->link = 1;
+
+ return 0;
+}
+
+static int lxt973a2_read_status(struct phy_device *phydev)
+{
+ int adv;
+ int err;
+ int lpa;
+
+ /* Update the link, but return if there was an error */
+ err = lxt973a2_update_link(phydev);
+ if (err)
+ return err;
+
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ int retry = 1;
+
+ adv = phy_read(phydev, MII_ADVERTISE);
+
+ if (adv < 0)
+ return adv;
+
+ do {
+ lpa = phy_read(phydev, MII_LPA);
+
+ if (lpa < 0)
+ return lpa;
+
+ /* If both registers are equal, it is suspect but not
+ * impossible, hence a new try
+ */
+ } while (lpa == adv && retry--);
+
+ phydev->lp_advertising = mii_lpa_to_ethtool_lpa_t(lpa);
+
+ lpa &= adv;
+
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+ phydev->pause = phydev->asym_pause = 0;
+
+ if (lpa & (LPA_100FULL | LPA_100HALF)) {
+ phydev->speed = SPEED_100;
+
+ if (lpa & LPA_100FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else {
+ if (lpa & LPA_10FULL)
+ phydev->duplex = DUPLEX_FULL;
+ }
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phydev, MII_BMCR);
+
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ phydev->pause = phydev->asym_pause = 0;
+ phydev->lp_advertising = 0;
+ }
+
+ return 0;
+}
+
+static int lxt973_probe(struct phy_device *phydev)
+{
+ int val = phy_read(phydev, MII_LXT973_PCR);
+
+ if (val & PCR_FIBER_SELECT) {
+ /*
+ * If fiber is selected, then the only correct setting
+ * is 100Mbps, full duplex, and auto negotiation off.
+ */
+ val = phy_read(phydev, MII_BMCR);
+ val |= (BMCR_SPEED100 | BMCR_FULLDPLX);
+ val &= ~BMCR_ANENABLE;
+ phy_write(phydev, MII_BMCR, val);
+ /* Remember that the port is in fiber mode. */
+ phydev->priv = lxt973_probe;
+ } else {
+ phydev->priv = NULL;
+ }
+ return 0;
+}
+
+static int lxt973_config_aneg(struct phy_device *phydev)
+{
+ /* Do nothing if port is in fiber mode. */
+ return phydev->priv ? 0 : genphy_config_aneg(phydev);
+}
+
+static struct phy_driver lxt97x_driver[] = {
+{
+ .phy_id = 0x78100000,
+ .name = "LXT970",
+ .phy_id_mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = lxt970_config_init,
+ .ack_interrupt = lxt970_ack_interrupt,
+ .config_intr = lxt970_config_intr,
+}, {
+ .phy_id = 0x001378e0,
+ .name = "LXT971",
+ .phy_id_mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .ack_interrupt = lxt971_ack_interrupt,
+ .config_intr = lxt971_config_intr,
+}, {
+ .phy_id = 0x00137a10,
+ .name = "LXT973-A2",
+ .phy_id_mask = 0xffffffff,
+ .features = PHY_BASIC_FEATURES,
+ .flags = 0,
+ .probe = lxt973_probe,
+ .config_aneg = lxt973_config_aneg,
+ .read_status = lxt973a2_read_status,
+}, {
+ .phy_id = 0x00137a10,
+ .name = "LXT973",
+ .phy_id_mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = 0,
+ .probe = lxt973_probe,
+ .config_aneg = lxt973_config_aneg,
+} };
+
+module_phy_driver(lxt97x_driver);
+
+static struct mdio_device_id __maybe_unused lxt_tbl[] = {
+ { 0x78100000, 0xfffffff0 },
+ { 0x001378e0, 0xfffffff0 },
+ { 0x00137a10, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, lxt_tbl);