v4.19.13 snapshot.
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
new file mode 100644
index 0000000..b393577
--- /dev/null
+++ b/drivers/net/phy/dp83867.c
@@ -0,0 +1,361 @@
+/*
+ * Driver for the Texas Instruments DP83867 PHY
+ *
+ * Copyright (C) 2015 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ethtool.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+#define DP83867_PHY_ID 0x2000a231
+#define DP83867_DEVADDR 0x1f
+
+#define MII_DP83867_PHYCTRL 0x10
+#define MII_DP83867_MICR 0x12
+#define MII_DP83867_ISR 0x13
+#define DP83867_CTRL 0x1f
+#define DP83867_CFG3 0x1e
+
+/* Extended Registers */
+#define DP83867_CFG4 0x0031
+#define DP83867_RGMIICTL 0x0032
+#define DP83867_STRAP_STS1 0x006E
+#define DP83867_RGMIIDCTL 0x0086
+#define DP83867_IO_MUX_CFG 0x0170
+
+#define DP83867_SW_RESET BIT(15)
+#define DP83867_SW_RESTART BIT(14)
+
+/* MICR Interrupt bits */
+#define MII_DP83867_MICR_AN_ERR_INT_EN BIT(15)
+#define MII_DP83867_MICR_SPEED_CHNG_INT_EN BIT(14)
+#define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN BIT(13)
+#define MII_DP83867_MICR_PAGE_RXD_INT_EN BIT(12)
+#define MII_DP83867_MICR_AUTONEG_COMP_INT_EN BIT(11)
+#define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN BIT(10)
+#define MII_DP83867_MICR_FALSE_CARRIER_INT_EN BIT(8)
+#define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN BIT(4)
+#define MII_DP83867_MICR_WOL_INT_EN BIT(3)
+#define MII_DP83867_MICR_XGMII_ERR_INT_EN BIT(2)
+#define MII_DP83867_MICR_POL_CHNG_INT_EN BIT(1)
+#define MII_DP83867_MICR_JABBER_INT_EN BIT(0)
+
+/* RGMIICTL bits */
+#define DP83867_RGMII_TX_CLK_DELAY_EN BIT(1)
+#define DP83867_RGMII_RX_CLK_DELAY_EN BIT(0)
+
+/* STRAP_STS1 bits */
+#define DP83867_STRAP_STS1_RESERVED BIT(11)
+
+/* PHY CTRL bits */
+#define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14
+#define DP83867_PHYCR_FIFO_DEPTH_MASK (3 << 14)
+#define DP83867_PHYCR_RESERVED_MASK BIT(11)
+
+/* RGMIIDCTL bits */
+#define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4
+
+/* IO_MUX_CFG bits */
+#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL 0x1f
+
+#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
+#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f
+#define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK (0x1f << 8)
+#define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8
+
+/* CFG4 bits */
+#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)
+
+enum {
+ DP83867_PORT_MIRROING_KEEP,
+ DP83867_PORT_MIRROING_EN,
+ DP83867_PORT_MIRROING_DIS,
+};
+
+struct dp83867_private {
+ int rx_id_delay;
+ int tx_id_delay;
+ int fifo_depth;
+ int io_impedance;
+ int port_mirroring;
+ bool rxctrl_strap_quirk;
+ int clk_output_sel;
+};
+
+static int dp83867_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_DP83867_ISR);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dp83867_config_intr(struct phy_device *phydev)
+{
+ int micr_status;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ micr_status = phy_read(phydev, MII_DP83867_MICR);
+ if (micr_status < 0)
+ return micr_status;
+
+ micr_status |=
+ (MII_DP83867_MICR_AN_ERR_INT_EN |
+ MII_DP83867_MICR_SPEED_CHNG_INT_EN |
+ MII_DP83867_MICR_AUTONEG_COMP_INT_EN |
+ MII_DP83867_MICR_LINK_STS_CHNG_INT_EN |
+ MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN |
+ MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN);
+
+ return phy_write(phydev, MII_DP83867_MICR, micr_status);
+ }
+
+ micr_status = 0x0;
+ return phy_write(phydev, MII_DP83867_MICR, micr_status);
+}
+
+static int dp83867_config_port_mirroring(struct phy_device *phydev)
+{
+ struct dp83867_private *dp83867 =
+ (struct dp83867_private *)phydev->priv;
+ u16 val;
+
+ val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
+
+ if (dp83867->port_mirroring == DP83867_PORT_MIRROING_EN)
+ val |= DP83867_CFG4_PORT_MIRROR_EN;
+ else
+ val &= ~DP83867_CFG4_PORT_MIRROR_EN;
+
+ phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF_MDIO
+static int dp83867_of_init(struct phy_device *phydev)
+{
+ struct dp83867_private *dp83867 = phydev->priv;
+ struct device *dev = &phydev->mdio.dev;
+ struct device_node *of_node = dev->of_node;
+ int ret;
+
+ if (!of_node)
+ return -ENODEV;
+
+ dp83867->io_impedance = -EINVAL;
+
+ /* Optional configuration */
+ ret = of_property_read_u32(of_node, "ti,clk-output-sel",
+ &dp83867->clk_output_sel);
+ if (ret || dp83867->clk_output_sel > DP83867_CLK_O_SEL_REF_CLK)
+ /* Keep the default value if ti,clk-output-sel is not set
+ * or too high
+ */
+ dp83867->clk_output_sel = DP83867_CLK_O_SEL_REF_CLK;
+
+ if (of_property_read_bool(of_node, "ti,max-output-impedance"))
+ dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX;
+ else if (of_property_read_bool(of_node, "ti,min-output-impedance"))
+ dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN;
+
+ dp83867->rxctrl_strap_quirk = of_property_read_bool(of_node,
+ "ti,dp83867-rxctrl-strap-quirk");
+
+ ret = of_property_read_u32(of_node, "ti,rx-internal-delay",
+ &dp83867->rx_id_delay);
+ if (ret &&
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID))
+ return ret;
+
+ ret = of_property_read_u32(of_node, "ti,tx-internal-delay",
+ &dp83867->tx_id_delay);
+ if (ret &&
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID))
+ return ret;
+
+ if (of_property_read_bool(of_node, "enet-phy-lane-swap"))
+ dp83867->port_mirroring = DP83867_PORT_MIRROING_EN;
+
+ if (of_property_read_bool(of_node, "enet-phy-lane-no-swap"))
+ dp83867->port_mirroring = DP83867_PORT_MIRROING_DIS;
+
+ return of_property_read_u32(of_node, "ti,fifo-depth",
+ &dp83867->fifo_depth);
+}
+#else
+static int dp83867_of_init(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
+static int dp83867_config_init(struct phy_device *phydev)
+{
+ struct dp83867_private *dp83867;
+ int ret, val, bs;
+ u16 delay;
+
+ if (!phydev->priv) {
+ dp83867 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83867),
+ GFP_KERNEL);
+ if (!dp83867)
+ return -ENOMEM;
+
+ phydev->priv = dp83867;
+ ret = dp83867_of_init(phydev);
+ if (ret)
+ return ret;
+ } else {
+ dp83867 = (struct dp83867_private *)phydev->priv;
+ }
+
+ /* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */
+ if (dp83867->rxctrl_strap_quirk) {
+ val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
+ val &= ~BIT(7);
+ phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
+ }
+
+ if (phy_interface_is_rgmii(phydev)) {
+ val = phy_read(phydev, MII_DP83867_PHYCTRL);
+ if (val < 0)
+ return val;
+ val &= ~DP83867_PHYCR_FIFO_DEPTH_MASK;
+ val |= (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT);
+
+ /* The code below checks if "port mirroring" N/A MODE4 has been
+ * enabled during power on bootstrap.
+ *
+ * Such N/A mode enabled by mistake can put PHY IC in some
+ * internal testing mode and disable RGMII transmission.
+ *
+ * In this particular case one needs to check STRAP_STS1
+ * register's bit 11 (marked as RESERVED).
+ */
+
+ bs = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_STRAP_STS1);
+ if (bs & DP83867_STRAP_STS1_RESERVED)
+ val &= ~DP83867_PHYCR_RESERVED_MASK;
+
+ ret = phy_write(phydev, MII_DP83867_PHYCTRL, val);
+ if (ret)
+ return ret;
+ }
+
+ if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
+ (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
+ val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL);
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ val |= (DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN);
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ val |= DP83867_RGMII_TX_CLK_DELAY_EN;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ val |= DP83867_RGMII_RX_CLK_DELAY_EN;
+
+ phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL, val);
+
+ delay = (dp83867->rx_id_delay |
+ (dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
+
+ phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL,
+ delay);
+
+ if (dp83867->io_impedance >= 0) {
+ val = phy_read_mmd(phydev, DP83867_DEVADDR,
+ DP83867_IO_MUX_CFG);
+
+ val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
+ val |= dp83867->io_impedance &
+ DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
+
+ phy_write_mmd(phydev, DP83867_DEVADDR,
+ DP83867_IO_MUX_CFG, val);
+ }
+ }
+
+ /* Enable Interrupt output INT_OE in CFG3 register */
+ if (phy_interrupt_is_valid(phydev)) {
+ val = phy_read(phydev, DP83867_CFG3);
+ val |= BIT(7);
+ phy_write(phydev, DP83867_CFG3, val);
+ }
+
+ if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP)
+ dp83867_config_port_mirroring(phydev);
+
+ /* Clock output selection if muxing property is set */
+ if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) {
+ val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG);
+ val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK;
+ val |= (dp83867->clk_output_sel << DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
+ phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG, val);
+ }
+
+ return 0;
+}
+
+static int dp83867_phy_reset(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESET);
+ if (err < 0)
+ return err;
+
+ return dp83867_config_init(phydev);
+}
+
+static struct phy_driver dp83867_driver[] = {
+ {
+ .phy_id = DP83867_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "TI DP83867",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+
+ .config_init = dp83867_config_init,
+ .soft_reset = dp83867_phy_reset,
+
+ /* IRQ related */
+ .ack_interrupt = dp83867_ack_interrupt,
+ .config_intr = dp83867_config_intr,
+
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ },
+};
+module_phy_driver(dp83867_driver);
+
+static struct mdio_device_id __maybe_unused dp83867_tbl[] = {
+ { DP83867_PHY_ID, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, dp83867_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83867 PHY driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
+MODULE_LICENSE("GPL");