v4.19.13 snapshot.
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
new file mode 100644
index 0000000..cf4788d
--- /dev/null
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -0,0 +1,1412 @@
+/*
+ * Driver for Microchip MRF24J40 802.15.4 Wireless-PAN Networking controller
+ *
+ * Copyright (C) 2012 Alan Ott <alan@signal11.us>
+ * Signal 11 Software
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/ieee802154.h>
+#include <linux/irq.h>
+#include <net/cfg802154.h>
+#include <net/mac802154.h>
+
+/* MRF24J40 Short Address Registers */
+#define REG_RXMCR 0x00 /* Receive MAC control */
+#define BIT_PROMI BIT(0)
+#define BIT_ERRPKT BIT(1)
+#define BIT_NOACKRSP BIT(5)
+#define BIT_PANCOORD BIT(3)
+
+#define REG_PANIDL 0x01 /* PAN ID (low) */
+#define REG_PANIDH 0x02 /* PAN ID (high) */
+#define REG_SADRL 0x03 /* Short address (low) */
+#define REG_SADRH 0x04 /* Short address (high) */
+#define REG_EADR0 0x05 /* Long address (low) (high is EADR7) */
+#define REG_EADR1 0x06
+#define REG_EADR2 0x07
+#define REG_EADR3 0x08
+#define REG_EADR4 0x09
+#define REG_EADR5 0x0A
+#define REG_EADR6 0x0B
+#define REG_EADR7 0x0C
+#define REG_RXFLUSH 0x0D
+#define REG_ORDER 0x10
+#define REG_TXMCR 0x11 /* Transmit MAC control */
+#define TXMCR_MIN_BE_SHIFT 3
+#define TXMCR_MIN_BE_MASK 0x18
+#define TXMCR_CSMA_RETRIES_SHIFT 0
+#define TXMCR_CSMA_RETRIES_MASK 0x07
+
+#define REG_ACKTMOUT 0x12
+#define REG_ESLOTG1 0x13
+#define REG_SYMTICKL 0x14
+#define REG_SYMTICKH 0x15
+#define REG_PACON0 0x16 /* Power Amplifier Control */
+#define REG_PACON1 0x17 /* Power Amplifier Control */
+#define REG_PACON2 0x18 /* Power Amplifier Control */
+#define REG_TXBCON0 0x1A
+#define REG_TXNCON 0x1B /* Transmit Normal FIFO Control */
+#define BIT_TXNTRIG BIT(0)
+#define BIT_TXNSECEN BIT(1)
+#define BIT_TXNACKREQ BIT(2)
+
+#define REG_TXG1CON 0x1C
+#define REG_TXG2CON 0x1D
+#define REG_ESLOTG23 0x1E
+#define REG_ESLOTG45 0x1F
+#define REG_ESLOTG67 0x20
+#define REG_TXPEND 0x21
+#define REG_WAKECON 0x22
+#define REG_FROMOFFSET 0x23
+#define REG_TXSTAT 0x24 /* TX MAC Status Register */
+#define REG_TXBCON1 0x25
+#define REG_GATECLK 0x26
+#define REG_TXTIME 0x27
+#define REG_HSYMTMRL 0x28
+#define REG_HSYMTMRH 0x29
+#define REG_SOFTRST 0x2A /* Soft Reset */
+#define REG_SECCON0 0x2C
+#define REG_SECCON1 0x2D
+#define REG_TXSTBL 0x2E /* TX Stabilization */
+#define REG_RXSR 0x30
+#define REG_INTSTAT 0x31 /* Interrupt Status */
+#define BIT_TXNIF BIT(0)
+#define BIT_RXIF BIT(3)
+#define BIT_SECIF BIT(4)
+#define BIT_SECIGNORE BIT(7)
+
+#define REG_INTCON 0x32 /* Interrupt Control */
+#define BIT_TXNIE BIT(0)
+#define BIT_RXIE BIT(3)
+#define BIT_SECIE BIT(4)
+
+#define REG_GPIO 0x33 /* GPIO */
+#define REG_TRISGPIO 0x34 /* GPIO direction */
+#define REG_SLPACK 0x35
+#define REG_RFCTL 0x36 /* RF Control Mode Register */
+#define BIT_RFRST BIT(2)
+
+#define REG_SECCR2 0x37
+#define REG_BBREG0 0x38
+#define REG_BBREG1 0x39 /* Baseband Registers */
+#define BIT_RXDECINV BIT(2)
+
+#define REG_BBREG2 0x3A /* */
+#define BBREG2_CCA_MODE_SHIFT 6
+#define BBREG2_CCA_MODE_MASK 0xc0
+
+#define REG_BBREG3 0x3B
+#define REG_BBREG4 0x3C
+#define REG_BBREG6 0x3E /* */
+#define REG_CCAEDTH 0x3F /* Energy Detection Threshold */
+
+/* MRF24J40 Long Address Registers */
+#define REG_RFCON0 0x200 /* RF Control Registers */
+#define RFCON0_CH_SHIFT 4
+#define RFCON0_CH_MASK 0xf0
+#define RFOPT_RECOMMEND 3
+
+#define REG_RFCON1 0x201
+#define REG_RFCON2 0x202
+#define REG_RFCON3 0x203
+
+#define TXPWRL_MASK 0xc0
+#define TXPWRL_SHIFT 6
+#define TXPWRL_30 0x3
+#define TXPWRL_20 0x2
+#define TXPWRL_10 0x1
+#define TXPWRL_0 0x0
+
+#define TXPWRS_MASK 0x38
+#define TXPWRS_SHIFT 3
+#define TXPWRS_6_3 0x7
+#define TXPWRS_4_9 0x6
+#define TXPWRS_3_7 0x5
+#define TXPWRS_2_8 0x4
+#define TXPWRS_1_9 0x3
+#define TXPWRS_1_2 0x2
+#define TXPWRS_0_5 0x1
+#define TXPWRS_0 0x0
+
+#define REG_RFCON5 0x205
+#define REG_RFCON6 0x206
+#define REG_RFCON7 0x207
+#define REG_RFCON8 0x208
+#define REG_SLPCAL0 0x209
+#define REG_SLPCAL1 0x20A
+#define REG_SLPCAL2 0x20B
+#define REG_RFSTATE 0x20F
+#define REG_RSSI 0x210
+#define REG_SLPCON0 0x211 /* Sleep Clock Control Registers */
+#define BIT_INTEDGE BIT(1)
+
+#define REG_SLPCON1 0x220
+#define REG_WAKETIMEL 0x222 /* Wake-up Time Match Value Low */
+#define REG_WAKETIMEH 0x223 /* Wake-up Time Match Value High */
+#define REG_REMCNTL 0x224
+#define REG_REMCNTH 0x225
+#define REG_MAINCNT0 0x226
+#define REG_MAINCNT1 0x227
+#define REG_MAINCNT2 0x228
+#define REG_MAINCNT3 0x229
+#define REG_TESTMODE 0x22F /* Test mode */
+#define REG_ASSOEAR0 0x230
+#define REG_ASSOEAR1 0x231
+#define REG_ASSOEAR2 0x232
+#define REG_ASSOEAR3 0x233
+#define REG_ASSOEAR4 0x234
+#define REG_ASSOEAR5 0x235
+#define REG_ASSOEAR6 0x236
+#define REG_ASSOEAR7 0x237
+#define REG_ASSOSAR0 0x238
+#define REG_ASSOSAR1 0x239
+#define REG_UNONCE0 0x240
+#define REG_UNONCE1 0x241
+#define REG_UNONCE2 0x242
+#define REG_UNONCE3 0x243
+#define REG_UNONCE4 0x244
+#define REG_UNONCE5 0x245
+#define REG_UNONCE6 0x246
+#define REG_UNONCE7 0x247
+#define REG_UNONCE8 0x248
+#define REG_UNONCE9 0x249
+#define REG_UNONCE10 0x24A
+#define REG_UNONCE11 0x24B
+#define REG_UNONCE12 0x24C
+#define REG_RX_FIFO 0x300 /* Receive FIFO */
+
+/* Device configuration: Only channels 11-26 on page 0 are supported. */
+#define MRF24J40_CHAN_MIN 11
+#define MRF24J40_CHAN_MAX 26
+#define CHANNEL_MASK (((u32)1 << (MRF24J40_CHAN_MAX + 1)) \
+ - ((u32)1 << MRF24J40_CHAN_MIN))
+
+#define TX_FIFO_SIZE 128 /* From datasheet */
+#define RX_FIFO_SIZE 144 /* From datasheet */
+#define SET_CHANNEL_DELAY_US 192 /* From datasheet */
+
+enum mrf24j40_modules { MRF24J40, MRF24J40MA, MRF24J40MC };
+
+/* Device Private Data */
+struct mrf24j40 {
+ struct spi_device *spi;
+ struct ieee802154_hw *hw;
+
+ struct regmap *regmap_short;
+ struct regmap *regmap_long;
+
+ /* for writing txfifo */
+ struct spi_message tx_msg;
+ u8 tx_hdr_buf[2];
+ struct spi_transfer tx_hdr_trx;
+ u8 tx_len_buf[2];
+ struct spi_transfer tx_len_trx;
+ struct spi_transfer tx_buf_trx;
+ struct sk_buff *tx_skb;
+
+ /* post transmit message to send frame out */
+ struct spi_message tx_post_msg;
+ u8 tx_post_buf[2];
+ struct spi_transfer tx_post_trx;
+
+ /* for protect/unprotect/read length rxfifo */
+ struct spi_message rx_msg;
+ u8 rx_buf[3];
+ struct spi_transfer rx_trx;
+
+ /* receive handling */
+ struct spi_message rx_buf_msg;
+ u8 rx_addr_buf[2];
+ struct spi_transfer rx_addr_trx;
+ u8 rx_lqi_buf[2];
+ struct spi_transfer rx_lqi_trx;
+ u8 rx_fifo_buf[RX_FIFO_SIZE];
+ struct spi_transfer rx_fifo_buf_trx;
+
+ /* isr handling for reading intstat */
+ struct spi_message irq_msg;
+ u8 irq_buf[2];
+ struct spi_transfer irq_trx;
+};
+
+/* regmap information for short address register access */
+#define MRF24J40_SHORT_WRITE 0x01
+#define MRF24J40_SHORT_READ 0x00
+#define MRF24J40_SHORT_NUMREGS 0x3F
+
+/* regmap information for long address register access */
+#define MRF24J40_LONG_ACCESS 0x80
+#define MRF24J40_LONG_NUMREGS 0x38F
+
+/* Read/Write SPI Commands for Short and Long Address registers. */
+#define MRF24J40_READSHORT(reg) ((reg) << 1)
+#define MRF24J40_WRITESHORT(reg) ((reg) << 1 | 1)
+#define MRF24J40_READLONG(reg) (1 << 15 | (reg) << 5)
+#define MRF24J40_WRITELONG(reg) (1 << 15 | (reg) << 5 | 1 << 4)
+
+/* The datasheet indicates the theoretical maximum for SCK to be 10MHz */
+#define MAX_SPI_SPEED_HZ 10000000
+
+#define printdev(X) (&X->spi->dev)
+
+static bool
+mrf24j40_short_reg_writeable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case REG_RXMCR:
+ case REG_PANIDL:
+ case REG_PANIDH:
+ case REG_SADRL:
+ case REG_SADRH:
+ case REG_EADR0:
+ case REG_EADR1:
+ case REG_EADR2:
+ case REG_EADR3:
+ case REG_EADR4:
+ case REG_EADR5:
+ case REG_EADR6:
+ case REG_EADR7:
+ case REG_RXFLUSH:
+ case REG_ORDER:
+ case REG_TXMCR:
+ case REG_ACKTMOUT:
+ case REG_ESLOTG1:
+ case REG_SYMTICKL:
+ case REG_SYMTICKH:
+ case REG_PACON0:
+ case REG_PACON1:
+ case REG_PACON2:
+ case REG_TXBCON0:
+ case REG_TXNCON:
+ case REG_TXG1CON:
+ case REG_TXG2CON:
+ case REG_ESLOTG23:
+ case REG_ESLOTG45:
+ case REG_ESLOTG67:
+ case REG_TXPEND:
+ case REG_WAKECON:
+ case REG_FROMOFFSET:
+ case REG_TXBCON1:
+ case REG_GATECLK:
+ case REG_TXTIME:
+ case REG_HSYMTMRL:
+ case REG_HSYMTMRH:
+ case REG_SOFTRST:
+ case REG_SECCON0:
+ case REG_SECCON1:
+ case REG_TXSTBL:
+ case REG_RXSR:
+ case REG_INTCON:
+ case REG_TRISGPIO:
+ case REG_GPIO:
+ case REG_RFCTL:
+ case REG_SECCR2:
+ case REG_SLPACK:
+ case REG_BBREG0:
+ case REG_BBREG1:
+ case REG_BBREG2:
+ case REG_BBREG3:
+ case REG_BBREG4:
+ case REG_BBREG6:
+ case REG_CCAEDTH:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool
+mrf24j40_short_reg_readable(struct device *dev, unsigned int reg)
+{
+ bool rc;
+
+ /* all writeable are also readable */
+ rc = mrf24j40_short_reg_writeable(dev, reg);
+ if (rc)
+ return rc;
+
+ /* readonly regs */
+ switch (reg) {
+ case REG_TXSTAT:
+ case REG_INTSTAT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool
+mrf24j40_short_reg_volatile(struct device *dev, unsigned int reg)
+{
+ /* can be changed during runtime */
+ switch (reg) {
+ case REG_TXSTAT:
+ case REG_INTSTAT:
+ case REG_RXFLUSH:
+ case REG_TXNCON:
+ case REG_SOFTRST:
+ case REG_RFCTL:
+ case REG_TXBCON0:
+ case REG_TXG1CON:
+ case REG_TXG2CON:
+ case REG_TXBCON1:
+ case REG_SECCON0:
+ case REG_RXSR:
+ case REG_SLPACK:
+ case REG_SECCR2:
+ case REG_BBREG6:
+ /* use them in spi_async and regmap so it's volatile */
+ case REG_BBREG1:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool
+mrf24j40_short_reg_precious(struct device *dev, unsigned int reg)
+{
+ /* don't clear irq line on read */
+ switch (reg) {
+ case REG_INTSTAT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config mrf24j40_short_regmap = {
+ .name = "mrf24j40_short",
+ .reg_bits = 7,
+ .val_bits = 8,
+ .pad_bits = 1,
+ .write_flag_mask = MRF24J40_SHORT_WRITE,
+ .read_flag_mask = MRF24J40_SHORT_READ,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = MRF24J40_SHORT_NUMREGS,
+ .writeable_reg = mrf24j40_short_reg_writeable,
+ .readable_reg = mrf24j40_short_reg_readable,
+ .volatile_reg = mrf24j40_short_reg_volatile,
+ .precious_reg = mrf24j40_short_reg_precious,
+};
+
+static bool
+mrf24j40_long_reg_writeable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case REG_RFCON0:
+ case REG_RFCON1:
+ case REG_RFCON2:
+ case REG_RFCON3:
+ case REG_RFCON5:
+ case REG_RFCON6:
+ case REG_RFCON7:
+ case REG_RFCON8:
+ case REG_SLPCAL2:
+ case REG_SLPCON0:
+ case REG_SLPCON1:
+ case REG_WAKETIMEL:
+ case REG_WAKETIMEH:
+ case REG_REMCNTL:
+ case REG_REMCNTH:
+ case REG_MAINCNT0:
+ case REG_MAINCNT1:
+ case REG_MAINCNT2:
+ case REG_MAINCNT3:
+ case REG_TESTMODE:
+ case REG_ASSOEAR0:
+ case REG_ASSOEAR1:
+ case REG_ASSOEAR2:
+ case REG_ASSOEAR3:
+ case REG_ASSOEAR4:
+ case REG_ASSOEAR5:
+ case REG_ASSOEAR6:
+ case REG_ASSOEAR7:
+ case REG_ASSOSAR0:
+ case REG_ASSOSAR1:
+ case REG_UNONCE0:
+ case REG_UNONCE1:
+ case REG_UNONCE2:
+ case REG_UNONCE3:
+ case REG_UNONCE4:
+ case REG_UNONCE5:
+ case REG_UNONCE6:
+ case REG_UNONCE7:
+ case REG_UNONCE8:
+ case REG_UNONCE9:
+ case REG_UNONCE10:
+ case REG_UNONCE11:
+ case REG_UNONCE12:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool
+mrf24j40_long_reg_readable(struct device *dev, unsigned int reg)
+{
+ bool rc;
+
+ /* all writeable are also readable */
+ rc = mrf24j40_long_reg_writeable(dev, reg);
+ if (rc)
+ return rc;
+
+ /* readonly regs */
+ switch (reg) {
+ case REG_SLPCAL0:
+ case REG_SLPCAL1:
+ case REG_RFSTATE:
+ case REG_RSSI:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool
+mrf24j40_long_reg_volatile(struct device *dev, unsigned int reg)
+{
+ /* can be changed during runtime */
+ switch (reg) {
+ case REG_SLPCAL0:
+ case REG_SLPCAL1:
+ case REG_SLPCAL2:
+ case REG_RFSTATE:
+ case REG_RSSI:
+ case REG_MAINCNT3:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config mrf24j40_long_regmap = {
+ .name = "mrf24j40_long",
+ .reg_bits = 11,
+ .val_bits = 8,
+ .pad_bits = 5,
+ .write_flag_mask = MRF24J40_LONG_ACCESS,
+ .read_flag_mask = MRF24J40_LONG_ACCESS,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = MRF24J40_LONG_NUMREGS,
+ .writeable_reg = mrf24j40_long_reg_writeable,
+ .readable_reg = mrf24j40_long_reg_readable,
+ .volatile_reg = mrf24j40_long_reg_volatile,
+};
+
+static int mrf24j40_long_regmap_write(void *context, const void *data,
+ size_t count)
+{
+ struct spi_device *spi = context;
+ u8 buf[3];
+
+ if (count > 3)
+ return -EINVAL;
+
+ /* regmap supports read/write mask only in frist byte
+ * long write access need to set the 12th bit, so we
+ * make special handling for write.
+ */
+ memcpy(buf, data, count);
+ buf[1] |= (1 << 4);
+
+ return spi_write(spi, buf, count);
+}
+
+static int
+mrf24j40_long_regmap_read(void *context, const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct spi_device *spi = context;
+
+ return spi_write_then_read(spi, reg, reg_size, val, val_size);
+}
+
+static const struct regmap_bus mrf24j40_long_regmap_bus = {
+ .write = mrf24j40_long_regmap_write,
+ .read = mrf24j40_long_regmap_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_BIG,
+ .val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static void write_tx_buf_complete(void *context)
+{
+ struct mrf24j40 *devrec = context;
+ __le16 fc = ieee802154_get_fc_from_skb(devrec->tx_skb);
+ u8 val = BIT_TXNTRIG;
+ int ret;
+
+ if (ieee802154_is_secen(fc))
+ val |= BIT_TXNSECEN;
+
+ if (ieee802154_is_ackreq(fc))
+ val |= BIT_TXNACKREQ;
+
+ devrec->tx_post_msg.complete = NULL;
+ devrec->tx_post_buf[0] = MRF24J40_WRITESHORT(REG_TXNCON);
+ devrec->tx_post_buf[1] = val;
+
+ ret = spi_async(devrec->spi, &devrec->tx_post_msg);
+ if (ret)
+ dev_err(printdev(devrec), "SPI write Failed for transmit buf\n");
+}
+
+/* This function relies on an undocumented write method. Once a write command
+ and address is set, as many bytes of data as desired can be clocked into
+ the device. The datasheet only shows setting one byte at a time. */
+static int write_tx_buf(struct mrf24j40 *devrec, u16 reg,
+ const u8 *data, size_t length)
+{
+ u16 cmd;
+ int ret;
+
+ /* Range check the length. 2 bytes are used for the length fields.*/
+ if (length > TX_FIFO_SIZE-2) {
+ dev_err(printdev(devrec), "write_tx_buf() was passed too large a buffer. Performing short write.\n");
+ length = TX_FIFO_SIZE-2;
+ }
+
+ cmd = MRF24J40_WRITELONG(reg);
+ devrec->tx_hdr_buf[0] = cmd >> 8 & 0xff;
+ devrec->tx_hdr_buf[1] = cmd & 0xff;
+ devrec->tx_len_buf[0] = 0x0; /* Header Length. Set to 0 for now. TODO */
+ devrec->tx_len_buf[1] = length; /* Total length */
+ devrec->tx_buf_trx.tx_buf = data;
+ devrec->tx_buf_trx.len = length;
+
+ ret = spi_async(devrec->spi, &devrec->tx_msg);
+ if (ret)
+ dev_err(printdev(devrec), "SPI write Failed for TX buf\n");
+
+ return ret;
+}
+
+static int mrf24j40_tx(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+ struct mrf24j40 *devrec = hw->priv;
+
+ dev_dbg(printdev(devrec), "tx packet of %d bytes\n", skb->len);
+ devrec->tx_skb = skb;
+
+ return write_tx_buf(devrec, 0x000, skb->data, skb->len);
+}
+
+static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level)
+{
+ /* TODO: */
+ pr_warn("mrf24j40: ed not implemented\n");
+ *level = 0;
+ return 0;
+}
+
+static int mrf24j40_start(struct ieee802154_hw *hw)
+{
+ struct mrf24j40 *devrec = hw->priv;
+
+ dev_dbg(printdev(devrec), "start\n");
+
+ /* Clear TXNIE and RXIE. Enable interrupts */
+ return regmap_update_bits(devrec->regmap_short, REG_INTCON,
+ BIT_TXNIE | BIT_RXIE | BIT_SECIE, 0);
+}
+
+static void mrf24j40_stop(struct ieee802154_hw *hw)
+{
+ struct mrf24j40 *devrec = hw->priv;
+
+ dev_dbg(printdev(devrec), "stop\n");
+
+ /* Set TXNIE and RXIE. Disable Interrupts */
+ regmap_update_bits(devrec->regmap_short, REG_INTCON,
+ BIT_TXNIE | BIT_RXIE, BIT_TXNIE | BIT_RXIE);
+}
+
+static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+ struct mrf24j40 *devrec = hw->priv;
+ u8 val;
+ int ret;
+
+ dev_dbg(printdev(devrec), "Set Channel %d\n", channel);
+
+ WARN_ON(page != 0);
+ WARN_ON(channel < MRF24J40_CHAN_MIN);
+ WARN_ON(channel > MRF24J40_CHAN_MAX);
+
+ /* Set Channel TODO */
+ val = (channel - 11) << RFCON0_CH_SHIFT | RFOPT_RECOMMEND;
+ ret = regmap_update_bits(devrec->regmap_long, REG_RFCON0,
+ RFCON0_CH_MASK, val);
+ if (ret)
+ return ret;
+
+ /* RF Reset */
+ ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST,
+ BIT_RFRST);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, 0);
+ if (!ret)
+ udelay(SET_CHANNEL_DELAY_US); /* per datasheet */
+
+ return ret;
+}
+
+static int mrf24j40_filter(struct ieee802154_hw *hw,
+ struct ieee802154_hw_addr_filt *filt,
+ unsigned long changed)
+{
+ struct mrf24j40 *devrec = hw->priv;
+
+ dev_dbg(printdev(devrec), "filter\n");
+
+ if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+ /* Short Addr */
+ u8 addrh, addrl;
+
+ addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff;
+ addrl = le16_to_cpu(filt->short_addr) & 0xff;
+
+ regmap_write(devrec->regmap_short, REG_SADRH, addrh);
+ regmap_write(devrec->regmap_short, REG_SADRL, addrl);
+ dev_dbg(printdev(devrec),
+ "Set short addr to %04hx\n", filt->short_addr);
+ }
+
+ if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+ /* Device Address */
+ u8 i, addr[8];
+
+ memcpy(addr, &filt->ieee_addr, 8);
+ for (i = 0; i < 8; i++)
+ regmap_write(devrec->regmap_short, REG_EADR0 + i,
+ addr[i]);
+
+#ifdef DEBUG
+ pr_debug("Set long addr to: ");
+ for (i = 0; i < 8; i++)
+ pr_debug("%02hhx ", addr[7 - i]);
+ pr_debug("\n");
+#endif
+ }
+
+ if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+ /* PAN ID */
+ u8 panidl, panidh;
+
+ panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff;
+ panidl = le16_to_cpu(filt->pan_id) & 0xff;
+ regmap_write(devrec->regmap_short, REG_PANIDH, panidh);
+ regmap_write(devrec->regmap_short, REG_PANIDL, panidl);
+
+ dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id);
+ }
+
+ if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+ /* Pan Coordinator */
+ u8 val;
+ int ret;
+
+ if (filt->pan_coord)
+ val = BIT_PANCOORD;
+ else
+ val = 0;
+ ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+ BIT_PANCOORD, val);
+ if (ret)
+ return ret;
+
+ /* REG_SLOTTED is maintained as default (unslotted/CSMA-CA).
+ * REG_ORDER is maintained as default (no beacon/superframe).
+ */
+
+ dev_dbg(printdev(devrec), "Set Pan Coord to %s\n",
+ filt->pan_coord ? "on" : "off");
+ }
+
+ return 0;
+}
+
+static void mrf24j40_handle_rx_read_buf_unlock(struct mrf24j40 *devrec)
+{
+ int ret;
+
+ /* Turn back on reception of packets off the air. */
+ devrec->rx_msg.complete = NULL;
+ devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1);
+ devrec->rx_buf[1] = 0x00; /* CLR RXDECINV */
+ ret = spi_async(devrec->spi, &devrec->rx_msg);
+ if (ret)
+ dev_err(printdev(devrec), "failed to unlock rx buffer\n");
+}
+
+static void mrf24j40_handle_rx_read_buf_complete(void *context)
+{
+ struct mrf24j40 *devrec = context;
+ u8 len = devrec->rx_buf[2];
+ u8 rx_local_buf[RX_FIFO_SIZE];
+ struct sk_buff *skb;
+
+ memcpy(rx_local_buf, devrec->rx_fifo_buf, len);
+ mrf24j40_handle_rx_read_buf_unlock(devrec);
+
+ skb = dev_alloc_skb(IEEE802154_MTU);
+ if (!skb) {
+ dev_err(printdev(devrec), "failed to allocate skb\n");
+ return;
+ }
+
+ skb_put_data(skb, rx_local_buf, len);
+ ieee802154_rx_irqsafe(devrec->hw, skb, 0);
+
+#ifdef DEBUG
+ print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", DUMP_PREFIX_OFFSET, 16, 1,
+ rx_local_buf, len, 0);
+ pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n",
+ devrec->rx_lqi_buf[0], devrec->rx_lqi_buf[1]);
+#endif
+}
+
+static void mrf24j40_handle_rx_read_buf(void *context)
+{
+ struct mrf24j40 *devrec = context;
+ u16 cmd;
+ int ret;
+
+ /* if length is invalid read the full MTU */
+ if (!ieee802154_is_valid_psdu_len(devrec->rx_buf[2]))
+ devrec->rx_buf[2] = IEEE802154_MTU;
+
+ cmd = MRF24J40_READLONG(REG_RX_FIFO + 1);
+ devrec->rx_addr_buf[0] = cmd >> 8 & 0xff;
+ devrec->rx_addr_buf[1] = cmd & 0xff;
+ devrec->rx_fifo_buf_trx.len = devrec->rx_buf[2];
+ ret = spi_async(devrec->spi, &devrec->rx_buf_msg);
+ if (ret) {
+ dev_err(printdev(devrec), "failed to read rx buffer\n");
+ mrf24j40_handle_rx_read_buf_unlock(devrec);
+ }
+}
+
+static void mrf24j40_handle_rx_read_len(void *context)
+{
+ struct mrf24j40 *devrec = context;
+ u16 cmd;
+ int ret;
+
+ /* read the length of received frame */
+ devrec->rx_msg.complete = mrf24j40_handle_rx_read_buf;
+ devrec->rx_trx.len = 3;
+ cmd = MRF24J40_READLONG(REG_RX_FIFO);
+ devrec->rx_buf[0] = cmd >> 8 & 0xff;
+ devrec->rx_buf[1] = cmd & 0xff;
+
+ ret = spi_async(devrec->spi, &devrec->rx_msg);
+ if (ret) {
+ dev_err(printdev(devrec), "failed to read rx buffer length\n");
+ mrf24j40_handle_rx_read_buf_unlock(devrec);
+ }
+}
+
+static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
+{
+ /* Turn off reception of packets off the air. This prevents the
+ * device from overwriting the buffer while we're reading it.
+ */
+ devrec->rx_msg.complete = mrf24j40_handle_rx_read_len;
+ devrec->rx_trx.len = 2;
+ devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1);
+ devrec->rx_buf[1] = BIT_RXDECINV; /* SET RXDECINV */
+
+ return spi_async(devrec->spi, &devrec->rx_msg);
+}
+
+static int
+mrf24j40_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be,
+ u8 retries)
+{
+ struct mrf24j40 *devrec = hw->priv;
+ u8 val;
+
+ /* min_be */
+ val = min_be << TXMCR_MIN_BE_SHIFT;
+ /* csma backoffs */
+ val |= retries << TXMCR_CSMA_RETRIES_SHIFT;
+
+ return regmap_update_bits(devrec->regmap_short, REG_TXMCR,
+ TXMCR_MIN_BE_MASK | TXMCR_CSMA_RETRIES_MASK,
+ val);
+}
+
+static int mrf24j40_set_cca_mode(struct ieee802154_hw *hw,
+ const struct wpan_phy_cca *cca)
+{
+ struct mrf24j40 *devrec = hw->priv;
+ u8 val;
+
+ /* mapping 802.15.4 to driver spec */
+ switch (cca->mode) {
+ case NL802154_CCA_ENERGY:
+ val = 2;
+ break;
+ case NL802154_CCA_CARRIER:
+ val = 1;
+ break;
+ case NL802154_CCA_ENERGY_CARRIER:
+ switch (cca->opt) {
+ case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
+ val = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(devrec->regmap_short, REG_BBREG2,
+ BBREG2_CCA_MODE_MASK,
+ val << BBREG2_CCA_MODE_SHIFT);
+}
+
+/* array for representing ed levels */
+static const s32 mrf24j40_ed_levels[] = {
+ -9000, -8900, -8800, -8700, -8600, -8500, -8400, -8300, -8200, -8100,
+ -8000, -7900, -7800, -7700, -7600, -7500, -7400, -7300, -7200, -7100,
+ -7000, -6900, -6800, -6700, -6600, -6500, -6400, -6300, -6200, -6100,
+ -6000, -5900, -5800, -5700, -5600, -5500, -5400, -5300, -5200, -5100,
+ -5000, -4900, -4800, -4700, -4600, -4500, -4400, -4300, -4200, -4100,
+ -4000, -3900, -3800, -3700, -3600, -3500
+};
+
+/* map ed levels to register value */
+static const s32 mrf24j40_ed_levels_map[][2] = {
+ { -9000, 0 }, { -8900, 1 }, { -8800, 2 }, { -8700, 5 }, { -8600, 9 },
+ { -8500, 13 }, { -8400, 18 }, { -8300, 23 }, { -8200, 27 },
+ { -8100, 32 }, { -8000, 37 }, { -7900, 43 }, { -7800, 48 },
+ { -7700, 53 }, { -7600, 58 }, { -7500, 63 }, { -7400, 68 },
+ { -7300, 73 }, { -7200, 78 }, { -7100, 83 }, { -7000, 89 },
+ { -6900, 95 }, { -6800, 100 }, { -6700, 107 }, { -6600, 111 },
+ { -6500, 117 }, { -6400, 121 }, { -6300, 125 }, { -6200, 129 },
+ { -6100, 133 }, { -6000, 138 }, { -5900, 143 }, { -5800, 148 },
+ { -5700, 153 }, { -5600, 159 }, { -5500, 165 }, { -5400, 170 },
+ { -5300, 176 }, { -5200, 183 }, { -5100, 188 }, { -5000, 193 },
+ { -4900, 198 }, { -4800, 203 }, { -4700, 207 }, { -4600, 212 },
+ { -4500, 216 }, { -4400, 221 }, { -4300, 225 }, { -4200, 228 },
+ { -4100, 233 }, { -4000, 239 }, { -3900, 245 }, { -3800, 250 },
+ { -3700, 253 }, { -3600, 254 }, { -3500, 255 },
+};
+
+static int mrf24j40_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+ struct mrf24j40 *devrec = hw->priv;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mrf24j40_ed_levels_map); i++) {
+ if (mrf24j40_ed_levels_map[i][0] == mbm)
+ return regmap_write(devrec->regmap_short, REG_CCAEDTH,
+ mrf24j40_ed_levels_map[i][1]);
+ }
+
+ return -EINVAL;
+}
+
+static const s32 mrf24j40ma_powers[] = {
+ 0, -50, -120, -190, -280, -370, -490, -630, -1000, -1050, -1120, -1190,
+ -1280, -1370, -1490, -1630, -2000, -2050, -2120, -2190, -2280, -2370,
+ -2490, -2630, -3000, -3050, -3120, -3190, -3280, -3370, -3490, -3630,
+};
+
+static int mrf24j40_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+ struct mrf24j40 *devrec = hw->priv;
+ s32 small_scale;
+ u8 val;
+
+ if (0 >= mbm && mbm > -1000) {
+ val = TXPWRL_0 << TXPWRL_SHIFT;
+ small_scale = mbm;
+ } else if (-1000 >= mbm && mbm > -2000) {
+ val = TXPWRL_10 << TXPWRL_SHIFT;
+ small_scale = mbm + 1000;
+ } else if (-2000 >= mbm && mbm > -3000) {
+ val = TXPWRL_20 << TXPWRL_SHIFT;
+ small_scale = mbm + 2000;
+ } else if (-3000 >= mbm && mbm > -4000) {
+ val = TXPWRL_30 << TXPWRL_SHIFT;
+ small_scale = mbm + 3000;
+ } else {
+ return -EINVAL;
+ }
+
+ switch (small_scale) {
+ case 0:
+ val |= (TXPWRS_0 << TXPWRS_SHIFT);
+ break;
+ case -50:
+ val |= (TXPWRS_0_5 << TXPWRS_SHIFT);
+ break;
+ case -120:
+ val |= (TXPWRS_1_2 << TXPWRS_SHIFT);
+ break;
+ case -190:
+ val |= (TXPWRS_1_9 << TXPWRS_SHIFT);
+ break;
+ case -280:
+ val |= (TXPWRS_2_8 << TXPWRS_SHIFT);
+ break;
+ case -370:
+ val |= (TXPWRS_3_7 << TXPWRS_SHIFT);
+ break;
+ case -490:
+ val |= (TXPWRS_4_9 << TXPWRS_SHIFT);
+ break;
+ case -630:
+ val |= (TXPWRS_6_3 << TXPWRS_SHIFT);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(devrec->regmap_long, REG_RFCON3,
+ TXPWRL_MASK | TXPWRS_MASK, val);
+}
+
+static int mrf24j40_set_promiscuous_mode(struct ieee802154_hw *hw, bool on)
+{
+ struct mrf24j40 *devrec = hw->priv;
+ int ret;
+
+ if (on) {
+ /* set PROMI, ERRPKT and NOACKRSP */
+ ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+ BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP,
+ BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP);
+ } else {
+ /* clear PROMI, ERRPKT and NOACKRSP */
+ ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+ BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP,
+ 0);
+ }
+
+ return ret;
+}
+
+static const struct ieee802154_ops mrf24j40_ops = {
+ .owner = THIS_MODULE,
+ .xmit_async = mrf24j40_tx,
+ .ed = mrf24j40_ed,
+ .start = mrf24j40_start,
+ .stop = mrf24j40_stop,
+ .set_channel = mrf24j40_set_channel,
+ .set_hw_addr_filt = mrf24j40_filter,
+ .set_csma_params = mrf24j40_csma_params,
+ .set_cca_mode = mrf24j40_set_cca_mode,
+ .set_cca_ed_level = mrf24j40_set_cca_ed_level,
+ .set_txpower = mrf24j40_set_txpower,
+ .set_promiscuous_mode = mrf24j40_set_promiscuous_mode,
+};
+
+static void mrf24j40_intstat_complete(void *context)
+{
+ struct mrf24j40 *devrec = context;
+ u8 intstat = devrec->irq_buf[1];
+
+ enable_irq(devrec->spi->irq);
+
+ /* Ignore Rx security decryption */
+ if (intstat & BIT_SECIF)
+ regmap_write_async(devrec->regmap_short, REG_SECCON0,
+ BIT_SECIGNORE);
+
+ /* Check for TX complete */
+ if (intstat & BIT_TXNIF)
+ ieee802154_xmit_complete(devrec->hw, devrec->tx_skb, false);
+
+ /* Check for Rx */
+ if (intstat & BIT_RXIF)
+ mrf24j40_handle_rx(devrec);
+}
+
+static irqreturn_t mrf24j40_isr(int irq, void *data)
+{
+ struct mrf24j40 *devrec = data;
+ int ret;
+
+ disable_irq_nosync(irq);
+
+ devrec->irq_buf[0] = MRF24J40_READSHORT(REG_INTSTAT);
+ devrec->irq_buf[1] = 0;
+
+ /* Read the interrupt status */
+ ret = spi_async(devrec->spi, &devrec->irq_msg);
+ if (ret) {
+ enable_irq(irq);
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int mrf24j40_hw_init(struct mrf24j40 *devrec)
+{
+ u32 irq_type;
+ int ret;
+
+ /* Initialize the device.
+ From datasheet section 3.2: Initialization. */
+ ret = regmap_write(devrec->regmap_short, REG_SOFTRST, 0x07);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_short, REG_PACON2, 0x98);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_short, REG_TXSTBL, 0x95);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_long, REG_RFCON0, 0x03);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_long, REG_RFCON1, 0x01);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_long, REG_RFCON2, 0x80);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_long, REG_RFCON6, 0x90);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_long, REG_RFCON7, 0x80);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_long, REG_RFCON8, 0x10);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_long, REG_SLPCON1, 0x21);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_short, REG_BBREG2, 0x80);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_short, REG_CCAEDTH, 0x60);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_short, REG_BBREG6, 0x40);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x04);
+ if (ret)
+ goto err_ret;
+
+ ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x0);
+ if (ret)
+ goto err_ret;
+
+ udelay(192);
+
+ /* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */
+ ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x03, 0x00);
+ if (ret)
+ goto err_ret;
+
+ if (spi_get_device_id(devrec->spi)->driver_data == MRF24J40MC) {
+ /* Enable external amplifier.
+ * From MRF24J40MC datasheet section 1.3: Operation.
+ */
+ regmap_update_bits(devrec->regmap_long, REG_TESTMODE, 0x07,
+ 0x07);
+
+ /* Set GPIO3 as output. */
+ regmap_update_bits(devrec->regmap_short, REG_TRISGPIO, 0x08,
+ 0x08);
+
+ /* Set GPIO3 HIGH to enable U5 voltage regulator */
+ regmap_update_bits(devrec->regmap_short, REG_GPIO, 0x08, 0x08);
+
+ /* Reduce TX pwr to meet FCC requirements.
+ * From MRF24J40MC datasheet section 3.1.1
+ */
+ regmap_write(devrec->regmap_long, REG_RFCON3, 0x28);
+ }
+
+ irq_type = irq_get_trigger_type(devrec->spi->irq);
+ if (irq_type == IRQ_TYPE_EDGE_RISING ||
+ irq_type == IRQ_TYPE_EDGE_FALLING)
+ dev_warn(&devrec->spi->dev,
+ "Using edge triggered irq's are not recommended, because it can cause races and result in a non-functional driver!\n");
+ switch (irq_type) {
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_LEVEL_HIGH:
+ /* set interrupt polarity to rising */
+ ret = regmap_update_bits(devrec->regmap_long, REG_SLPCON0,
+ BIT_INTEDGE, BIT_INTEDGE);
+ if (ret)
+ goto err_ret;
+ break;
+ default:
+ /* default is falling edge */
+ break;
+ }
+
+ return 0;
+
+err_ret:
+ return ret;
+}
+
+static void
+mrf24j40_setup_tx_spi_messages(struct mrf24j40 *devrec)
+{
+ spi_message_init(&devrec->tx_msg);
+ devrec->tx_msg.context = devrec;
+ devrec->tx_msg.complete = write_tx_buf_complete;
+ devrec->tx_hdr_trx.len = 2;
+ devrec->tx_hdr_trx.tx_buf = devrec->tx_hdr_buf;
+ spi_message_add_tail(&devrec->tx_hdr_trx, &devrec->tx_msg);
+ devrec->tx_len_trx.len = 2;
+ devrec->tx_len_trx.tx_buf = devrec->tx_len_buf;
+ spi_message_add_tail(&devrec->tx_len_trx, &devrec->tx_msg);
+ spi_message_add_tail(&devrec->tx_buf_trx, &devrec->tx_msg);
+
+ spi_message_init(&devrec->tx_post_msg);
+ devrec->tx_post_msg.context = devrec;
+ devrec->tx_post_trx.len = 2;
+ devrec->tx_post_trx.tx_buf = devrec->tx_post_buf;
+ spi_message_add_tail(&devrec->tx_post_trx, &devrec->tx_post_msg);
+}
+
+static void
+mrf24j40_setup_rx_spi_messages(struct mrf24j40 *devrec)
+{
+ spi_message_init(&devrec->rx_msg);
+ devrec->rx_msg.context = devrec;
+ devrec->rx_trx.len = 2;
+ devrec->rx_trx.tx_buf = devrec->rx_buf;
+ devrec->rx_trx.rx_buf = devrec->rx_buf;
+ spi_message_add_tail(&devrec->rx_trx, &devrec->rx_msg);
+
+ spi_message_init(&devrec->rx_buf_msg);
+ devrec->rx_buf_msg.context = devrec;
+ devrec->rx_buf_msg.complete = mrf24j40_handle_rx_read_buf_complete;
+ devrec->rx_addr_trx.len = 2;
+ devrec->rx_addr_trx.tx_buf = devrec->rx_addr_buf;
+ spi_message_add_tail(&devrec->rx_addr_trx, &devrec->rx_buf_msg);
+ devrec->rx_fifo_buf_trx.rx_buf = devrec->rx_fifo_buf;
+ spi_message_add_tail(&devrec->rx_fifo_buf_trx, &devrec->rx_buf_msg);
+ devrec->rx_lqi_trx.len = 2;
+ devrec->rx_lqi_trx.rx_buf = devrec->rx_lqi_buf;
+ spi_message_add_tail(&devrec->rx_lqi_trx, &devrec->rx_buf_msg);
+}
+
+static void
+mrf24j40_setup_irq_spi_messages(struct mrf24j40 *devrec)
+{
+ spi_message_init(&devrec->irq_msg);
+ devrec->irq_msg.context = devrec;
+ devrec->irq_msg.complete = mrf24j40_intstat_complete;
+ devrec->irq_trx.len = 2;
+ devrec->irq_trx.tx_buf = devrec->irq_buf;
+ devrec->irq_trx.rx_buf = devrec->irq_buf;
+ spi_message_add_tail(&devrec->irq_trx, &devrec->irq_msg);
+}
+
+static void mrf24j40_phy_setup(struct mrf24j40 *devrec)
+{
+ ieee802154_random_extended_addr(&devrec->hw->phy->perm_extended_addr);
+ devrec->hw->phy->current_channel = 11;
+
+ /* mrf24j40 supports max_minbe 0 - 3 */
+ devrec->hw->phy->supported.max_minbe = 3;
+ /* datasheet doesn't say anything about max_be, but we have min_be
+ * So we assume the max_be default.
+ */
+ devrec->hw->phy->supported.min_maxbe = 5;
+ devrec->hw->phy->supported.max_maxbe = 5;
+
+ devrec->hw->phy->cca.mode = NL802154_CCA_CARRIER;
+ devrec->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+ BIT(NL802154_CCA_CARRIER) |
+ BIT(NL802154_CCA_ENERGY_CARRIER);
+ devrec->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND);
+
+ devrec->hw->phy->cca_ed_level = -6900;
+ devrec->hw->phy->supported.cca_ed_levels = mrf24j40_ed_levels;
+ devrec->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(mrf24j40_ed_levels);
+
+ switch (spi_get_device_id(devrec->spi)->driver_data) {
+ case MRF24J40:
+ case MRF24J40MA:
+ devrec->hw->phy->supported.tx_powers = mrf24j40ma_powers;
+ devrec->hw->phy->supported.tx_powers_size = ARRAY_SIZE(mrf24j40ma_powers);
+ devrec->hw->phy->flags |= WPAN_PHY_FLAG_TXPOWER;
+ break;
+ default:
+ break;
+ }
+}
+
+static int mrf24j40_probe(struct spi_device *spi)
+{
+ int ret = -ENOMEM, irq_type;
+ struct ieee802154_hw *hw;
+ struct mrf24j40 *devrec;
+
+ dev_info(&spi->dev, "probe(). IRQ: %d\n", spi->irq);
+
+ /* Register with the 802154 subsystem */
+
+ hw = ieee802154_alloc_hw(sizeof(*devrec), &mrf24j40_ops);
+ if (!hw)
+ goto err_ret;
+
+ devrec = hw->priv;
+ devrec->spi = spi;
+ spi_set_drvdata(spi, devrec);
+ devrec->hw = hw;
+ devrec->hw->parent = &spi->dev;
+ devrec->hw->phy->supported.channels[0] = CHANNEL_MASK;
+ devrec->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
+ IEEE802154_HW_CSMA_PARAMS |
+ IEEE802154_HW_PROMISCUOUS;
+
+ devrec->hw->phy->flags = WPAN_PHY_FLAG_CCA_MODE |
+ WPAN_PHY_FLAG_CCA_ED_LEVEL;
+
+ mrf24j40_setup_tx_spi_messages(devrec);
+ mrf24j40_setup_rx_spi_messages(devrec);
+ mrf24j40_setup_irq_spi_messages(devrec);
+
+ devrec->regmap_short = devm_regmap_init_spi(spi,
+ &mrf24j40_short_regmap);
+ if (IS_ERR(devrec->regmap_short)) {
+ ret = PTR_ERR(devrec->regmap_short);
+ dev_err(&spi->dev, "Failed to allocate short register map: %d\n",
+ ret);
+ goto err_register_device;
+ }
+
+ devrec->regmap_long = devm_regmap_init(&spi->dev,
+ &mrf24j40_long_regmap_bus,
+ spi, &mrf24j40_long_regmap);
+ if (IS_ERR(devrec->regmap_long)) {
+ ret = PTR_ERR(devrec->regmap_long);
+ dev_err(&spi->dev, "Failed to allocate long register map: %d\n",
+ ret);
+ goto err_register_device;
+ }
+
+ if (spi->max_speed_hz > MAX_SPI_SPEED_HZ) {
+ dev_warn(&spi->dev, "spi clock above possible maximum: %d",
+ MAX_SPI_SPEED_HZ);
+ ret = -EINVAL;
+ goto err_register_device;
+ }
+
+ ret = mrf24j40_hw_init(devrec);
+ if (ret)
+ goto err_register_device;
+
+ mrf24j40_phy_setup(devrec);
+
+ /* request IRQF_TRIGGER_LOW as fallback default */
+ irq_type = irq_get_trigger_type(spi->irq);
+ if (!irq_type)
+ irq_type = IRQF_TRIGGER_LOW;
+
+ ret = devm_request_irq(&spi->dev, spi->irq, mrf24j40_isr,
+ irq_type, dev_name(&spi->dev), devrec);
+ if (ret) {
+ dev_err(printdev(devrec), "Unable to get IRQ");
+ goto err_register_device;
+ }
+
+ dev_dbg(printdev(devrec), "registered mrf24j40\n");
+ ret = ieee802154_register_hw(devrec->hw);
+ if (ret)
+ goto err_register_device;
+
+ return 0;
+
+err_register_device:
+ ieee802154_free_hw(devrec->hw);
+err_ret:
+ return ret;
+}
+
+static int mrf24j40_remove(struct spi_device *spi)
+{
+ struct mrf24j40 *devrec = spi_get_drvdata(spi);
+
+ dev_dbg(printdev(devrec), "remove\n");
+
+ ieee802154_unregister_hw(devrec->hw);
+ ieee802154_free_hw(devrec->hw);
+ /* TODO: Will ieee802154_free_device() wait until ->xmit() is
+ * complete? */
+
+ return 0;
+}
+
+static const struct of_device_id mrf24j40_of_match[] = {
+ { .compatible = "microchip,mrf24j40", .data = (void *)MRF24J40 },
+ { .compatible = "microchip,mrf24j40ma", .data = (void *)MRF24J40MA },
+ { .compatible = "microchip,mrf24j40mc", .data = (void *)MRF24J40MC },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mrf24j40_of_match);
+
+static const struct spi_device_id mrf24j40_ids[] = {
+ { "mrf24j40", MRF24J40 },
+ { "mrf24j40ma", MRF24J40MA },
+ { "mrf24j40mc", MRF24J40MC },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, mrf24j40_ids);
+
+static struct spi_driver mrf24j40_driver = {
+ .driver = {
+ .of_match_table = of_match_ptr(mrf24j40_of_match),
+ .name = "mrf24j40",
+ },
+ .id_table = mrf24j40_ids,
+ .probe = mrf24j40_probe,
+ .remove = mrf24j40_remove,
+};
+
+module_spi_driver(mrf24j40_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alan Ott");
+MODULE_DESCRIPTION("MRF24J40 SPI 802.15.4 Controller Driver");