v4.19.13 snapshot.
diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
new file mode 100644
index 0000000..4f684cb
--- /dev/null
+++ b/drivers/net/ieee802154/atusb.c
@@ -0,0 +1,1179 @@
+/*
+ * atusb.c - Driver for the ATUSB IEEE 802.15.4 dongle
+ *
+ * Written 2013 by Werner Almesberger <werner@almesberger.net>
+ *
+ * Copyright (c) 2015 - 2016 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2
+ *
+ * Based on at86rf230.c and spi_atusb.c.
+ * at86rf230.c is
+ * Copyright (C) 2009 Siemens AG
+ * Written by: Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com>
+ *
+ * spi_atusb.c is
+ * Copyright (c) 2011 Richard Sharpe <realrichardsharpe@gmail.com>
+ * Copyright (c) 2011 Stefan Schmidt <stefan@datenfreihafen.org>
+ * Copyright (c) 2011 Werner Almesberger <werner@almesberger.net>
+ *
+ * USB initialization is
+ * Copyright (c) 2013 Alexander Aring <alex.aring@gmail.com>
+ *
+ * Busware HUL support is
+ * Copyright (c) 2017 Josef Filzmaier <j.filzmaier@gmx.at>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/usb.h>
+#include <linux/skbuff.h>
+
+#include <net/cfg802154.h>
+#include <net/mac802154.h>
+
+#include "at86rf230.h"
+#include "atusb.h"
+
+#define ATUSB_JEDEC_ATMEL 0x1f /* JEDEC manufacturer ID */
+
+#define ATUSB_NUM_RX_URBS 4 /* allow for a bit of local latency */
+#define ATUSB_ALLOC_DELAY_MS 100 /* delay after failed allocation */
+#define ATUSB_TX_TIMEOUT_MS 200 /* on the air timeout */
+
+struct atusb {
+ struct ieee802154_hw *hw;
+ struct usb_device *usb_dev;
+ struct atusb_chip_data *data;
+ int shutdown; /* non-zero if shutting down */
+ int err; /* set by first error */
+
+ /* RX variables */
+ struct delayed_work work; /* memory allocations */
+ struct usb_anchor idle_urbs; /* URBs waiting to be submitted */
+ struct usb_anchor rx_urbs; /* URBs waiting for reception */
+
+ /* TX variables */
+ struct usb_ctrlrequest tx_dr;
+ struct urb *tx_urb;
+ struct sk_buff *tx_skb;
+ u8 tx_ack_seq; /* current TX ACK sequence number */
+
+ /* Firmware variable */
+ unsigned char fw_ver_maj; /* Firmware major version number */
+ unsigned char fw_ver_min; /* Firmware minor version number */
+ unsigned char fw_hw_type; /* Firmware hardware type */
+};
+
+struct atusb_chip_data {
+ u16 t_channel_switch;
+ int rssi_base_val;
+
+ int (*set_channel)(struct ieee802154_hw*, u8, u8);
+ int (*set_txpower)(struct ieee802154_hw*, s32);
+};
+
+/* ----- USB commands without data ----------------------------------------- */
+
+/* To reduce the number of error checks in the code, we record the first error
+ * in atusb->err and reject all subsequent requests until the error is cleared.
+ */
+
+static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
+ __u8 request, __u8 requesttype,
+ __u16 value, __u16 index,
+ void *data, __u16 size, int timeout)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+ int ret;
+
+ if (atusb->err)
+ return atusb->err;
+
+ ret = usb_control_msg(usb_dev, pipe, request, requesttype,
+ value, index, data, size, timeout);
+ if (ret < 0) {
+ atusb->err = ret;
+ dev_err(&usb_dev->dev,
+ "%s: req 0x%02x val 0x%x idx 0x%x, error %d\n",
+ __func__, request, value, index, ret);
+ }
+ return ret;
+}
+
+static int atusb_command(struct atusb *atusb, u8 cmd, u8 arg)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+
+ dev_dbg(&usb_dev->dev, "%s: cmd = 0x%x\n", __func__, cmd);
+ return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
+ cmd, ATUSB_REQ_TO_DEV, arg, 0, NULL, 0, 1000);
+}
+
+static int atusb_write_reg(struct atusb *atusb, u8 reg, u8 value)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+
+ dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value);
+ return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
+ ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+ value, reg, NULL, 0, 1000);
+}
+
+static int atusb_read_reg(struct atusb *atusb, u8 reg)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+ int ret;
+ u8 *buffer;
+ u8 value;
+
+ buffer = kmalloc(1, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ dev_dbg(&usb_dev->dev, "%s: reg = 0x%x\n", __func__, reg);
+ ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
+ ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+ 0, reg, buffer, 1, 1000);
+
+ if (ret >= 0) {
+ value = buffer[0];
+ kfree(buffer);
+ return value;
+ } else {
+ kfree(buffer);
+ return ret;
+ }
+}
+
+static int atusb_write_subreg(struct atusb *atusb, u8 reg, u8 mask,
+ u8 shift, u8 value)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+ u8 orig, tmp;
+ int ret = 0;
+
+ dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value);
+
+ orig = atusb_read_reg(atusb, reg);
+
+ /* Write the value only into that part of the register which is allowed
+ * by the mask. All other bits stay as before.
+ */
+ tmp = orig & ~mask;
+ tmp |= (value << shift) & mask;
+
+ if (tmp != orig)
+ ret = atusb_write_reg(atusb, reg, tmp);
+
+ return ret;
+}
+
+static int atusb_read_subreg(struct atusb *lp,
+ unsigned int addr, unsigned int mask,
+ unsigned int shift)
+{
+ int rc;
+
+ rc = atusb_read_reg(lp, addr);
+ rc = (rc & mask) >> shift;
+
+ return rc;
+}
+
+static int atusb_get_and_clear_error(struct atusb *atusb)
+{
+ int err = atusb->err;
+
+ atusb->err = 0;
+ return err;
+}
+
+/* ----- skb allocation ---------------------------------------------------- */
+
+#define MAX_PSDU 127
+#define MAX_RX_XFER (1 + MAX_PSDU + 2 + 1) /* PHR+PSDU+CRC+LQI */
+
+#define SKB_ATUSB(skb) (*(struct atusb **)(skb)->cb)
+
+static void atusb_in(struct urb *urb);
+
+static int atusb_submit_rx_urb(struct atusb *atusb, struct urb *urb)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+ struct sk_buff *skb = urb->context;
+ int ret;
+
+ if (!skb) {
+ skb = alloc_skb(MAX_RX_XFER, GFP_KERNEL);
+ if (!skb) {
+ dev_warn_ratelimited(&usb_dev->dev,
+ "atusb_in: can't allocate skb\n");
+ return -ENOMEM;
+ }
+ skb_put(skb, MAX_RX_XFER);
+ SKB_ATUSB(skb) = atusb;
+ }
+
+ usb_fill_bulk_urb(urb, usb_dev, usb_rcvbulkpipe(usb_dev, 1),
+ skb->data, MAX_RX_XFER, atusb_in, skb);
+ usb_anchor_urb(urb, &atusb->rx_urbs);
+
+ ret = usb_submit_urb(urb, GFP_KERNEL);
+ if (ret) {
+ usb_unanchor_urb(urb);
+ kfree_skb(skb);
+ urb->context = NULL;
+ }
+ return ret;
+}
+
+static void atusb_work_urbs(struct work_struct *work)
+{
+ struct atusb *atusb =
+ container_of(to_delayed_work(work), struct atusb, work);
+ struct usb_device *usb_dev = atusb->usb_dev;
+ struct urb *urb;
+ int ret;
+
+ if (atusb->shutdown)
+ return;
+
+ do {
+ urb = usb_get_from_anchor(&atusb->idle_urbs);
+ if (!urb)
+ return;
+ ret = atusb_submit_rx_urb(atusb, urb);
+ } while (!ret);
+
+ usb_anchor_urb(urb, &atusb->idle_urbs);
+ dev_warn_ratelimited(&usb_dev->dev,
+ "atusb_in: can't allocate/submit URB (%d)\n", ret);
+ schedule_delayed_work(&atusb->work,
+ msecs_to_jiffies(ATUSB_ALLOC_DELAY_MS) + 1);
+}
+
+/* ----- Asynchronous USB -------------------------------------------------- */
+
+static void atusb_tx_done(struct atusb *atusb, u8 seq)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+ u8 expect = atusb->tx_ack_seq;
+
+ dev_dbg(&usb_dev->dev, "%s (0x%02x/0x%02x)\n", __func__, seq, expect);
+ if (seq == expect) {
+ /* TODO check for ifs handling in firmware */
+ ieee802154_xmit_complete(atusb->hw, atusb->tx_skb, false);
+ } else {
+ /* TODO I experience this case when atusb has a tx complete
+ * irq before probing, we should fix the firmware it's an
+ * unlikely case now that seq == expect is then true, but can
+ * happen and fail with a tx_skb = NULL;
+ */
+ ieee802154_wake_queue(atusb->hw);
+ if (atusb->tx_skb)
+ dev_kfree_skb_irq(atusb->tx_skb);
+ }
+}
+
+static void atusb_in_good(struct urb *urb)
+{
+ struct usb_device *usb_dev = urb->dev;
+ struct sk_buff *skb = urb->context;
+ struct atusb *atusb = SKB_ATUSB(skb);
+ u8 len, lqi;
+
+ if (!urb->actual_length) {
+ dev_dbg(&usb_dev->dev, "atusb_in: zero-sized URB ?\n");
+ return;
+ }
+
+ len = *skb->data;
+
+ if (urb->actual_length == 1) {
+ atusb_tx_done(atusb, len);
+ return;
+ }
+
+ if (len + 1 > urb->actual_length - 1) {
+ dev_dbg(&usb_dev->dev, "atusb_in: frame len %d+1 > URB %u-1\n",
+ len, urb->actual_length);
+ return;
+ }
+
+ if (!ieee802154_is_valid_psdu_len(len)) {
+ dev_dbg(&usb_dev->dev, "atusb_in: frame corrupted\n");
+ return;
+ }
+
+ lqi = skb->data[len + 1];
+ dev_dbg(&usb_dev->dev, "atusb_in: rx len %d lqi 0x%02x\n", len, lqi);
+ skb_pull(skb, 1); /* remove PHR */
+ skb_trim(skb, len); /* get payload only */
+ ieee802154_rx_irqsafe(atusb->hw, skb, lqi);
+ urb->context = NULL; /* skb is gone */
+}
+
+static void atusb_in(struct urb *urb)
+{
+ struct usb_device *usb_dev = urb->dev;
+ struct sk_buff *skb = urb->context;
+ struct atusb *atusb = SKB_ATUSB(skb);
+
+ dev_dbg(&usb_dev->dev, "%s: status %d len %d\n", __func__,
+ urb->status, urb->actual_length);
+ if (urb->status) {
+ if (urb->status == -ENOENT) { /* being killed */
+ kfree_skb(skb);
+ urb->context = NULL;
+ return;
+ }
+ dev_dbg(&usb_dev->dev, "%s: URB error %d\n", __func__, urb->status);
+ } else {
+ atusb_in_good(urb);
+ }
+
+ usb_anchor_urb(urb, &atusb->idle_urbs);
+ if (!atusb->shutdown)
+ schedule_delayed_work(&atusb->work, 0);
+}
+
+/* ----- URB allocation/deallocation --------------------------------------- */
+
+static void atusb_free_urbs(struct atusb *atusb)
+{
+ struct urb *urb;
+
+ while (1) {
+ urb = usb_get_from_anchor(&atusb->idle_urbs);
+ if (!urb)
+ break;
+ kfree_skb(urb->context);
+ usb_free_urb(urb);
+ }
+}
+
+static int atusb_alloc_urbs(struct atusb *atusb, int n)
+{
+ struct urb *urb;
+
+ while (n) {
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ atusb_free_urbs(atusb);
+ return -ENOMEM;
+ }
+ usb_anchor_urb(urb, &atusb->idle_urbs);
+ n--;
+ }
+ return 0;
+}
+
+/* ----- IEEE 802.15.4 interface operations -------------------------------- */
+
+static void atusb_xmit_complete(struct urb *urb)
+{
+ dev_dbg(&urb->dev->dev, "atusb_xmit urb completed");
+}
+
+static int atusb_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+ struct atusb *atusb = hw->priv;
+ struct usb_device *usb_dev = atusb->usb_dev;
+ int ret;
+
+ dev_dbg(&usb_dev->dev, "%s (%d)\n", __func__, skb->len);
+ atusb->tx_skb = skb;
+ atusb->tx_ack_seq++;
+ atusb->tx_dr.wIndex = cpu_to_le16(atusb->tx_ack_seq);
+ atusb->tx_dr.wLength = cpu_to_le16(skb->len);
+
+ usb_fill_control_urb(atusb->tx_urb, usb_dev,
+ usb_sndctrlpipe(usb_dev, 0),
+ (unsigned char *)&atusb->tx_dr, skb->data,
+ skb->len, atusb_xmit_complete, NULL);
+ ret = usb_submit_urb(atusb->tx_urb, GFP_ATOMIC);
+ dev_dbg(&usb_dev->dev, "%s done (%d)\n", __func__, ret);
+ return ret;
+}
+
+static int atusb_ed(struct ieee802154_hw *hw, u8 *level)
+{
+ WARN_ON(!level);
+ *level = 0xbe;
+ return 0;
+}
+
+static int atusb_set_hw_addr_filt(struct ieee802154_hw *hw,
+ struct ieee802154_hw_addr_filt *filt,
+ unsigned long changed)
+{
+ struct atusb *atusb = hw->priv;
+ struct device *dev = &atusb->usb_dev->dev;
+
+ if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+ u16 addr = le16_to_cpu(filt->short_addr);
+
+ dev_vdbg(dev, "%s called for saddr\n", __func__);
+ atusb_write_reg(atusb, RG_SHORT_ADDR_0, addr);
+ atusb_write_reg(atusb, RG_SHORT_ADDR_1, addr >> 8);
+ }
+
+ if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+ u16 pan = le16_to_cpu(filt->pan_id);
+
+ dev_vdbg(dev, "%s called for pan id\n", __func__);
+ atusb_write_reg(atusb, RG_PAN_ID_0, pan);
+ atusb_write_reg(atusb, RG_PAN_ID_1, pan >> 8);
+ }
+
+ if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+ u8 i, addr[IEEE802154_EXTENDED_ADDR_LEN];
+
+ memcpy(addr, &filt->ieee_addr, IEEE802154_EXTENDED_ADDR_LEN);
+ dev_vdbg(dev, "%s called for IEEE addr\n", __func__);
+ for (i = 0; i < 8; i++)
+ atusb_write_reg(atusb, RG_IEEE_ADDR_0 + i, addr[i]);
+ }
+
+ if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+ dev_vdbg(dev, "%s called for panc change\n", __func__);
+ if (filt->pan_coord)
+ atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 1);
+ else
+ atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 0);
+ }
+
+ return atusb_get_and_clear_error(atusb);
+}
+
+static int atusb_start(struct ieee802154_hw *hw)
+{
+ struct atusb *atusb = hw->priv;
+ struct usb_device *usb_dev = atusb->usb_dev;
+ int ret;
+
+ dev_dbg(&usb_dev->dev, "%s\n", __func__);
+ schedule_delayed_work(&atusb->work, 0);
+ atusb_command(atusb, ATUSB_RX_MODE, 1);
+ ret = atusb_get_and_clear_error(atusb);
+ if (ret < 0)
+ usb_kill_anchored_urbs(&atusb->idle_urbs);
+ return ret;
+}
+
+static void atusb_stop(struct ieee802154_hw *hw)
+{
+ struct atusb *atusb = hw->priv;
+ struct usb_device *usb_dev = atusb->usb_dev;
+
+ dev_dbg(&usb_dev->dev, "%s\n", __func__);
+ usb_kill_anchored_urbs(&atusb->idle_urbs);
+ atusb_command(atusb, ATUSB_RX_MODE, 0);
+ atusb_get_and_clear_error(atusb);
+}
+
+#define ATUSB_MAX_TX_POWERS 0xF
+static const s32 atusb_powers[ATUSB_MAX_TX_POWERS + 1] = {
+ 300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
+ -900, -1200, -1700,
+};
+
+static int
+atusb_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+ struct atusb *atusb = hw->priv;
+
+ if (atusb->data)
+ return atusb->data->set_txpower(hw, mbm);
+ else
+ return -ENOTSUPP;
+}
+
+static int
+atusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+ struct atusb *atusb = hw->priv;
+ u32 i;
+
+ for (i = 0; i < hw->phy->supported.tx_powers_size; i++) {
+ if (hw->phy->supported.tx_powers[i] == mbm)
+ return atusb_write_subreg(atusb, SR_TX_PWR_23X, i);
+ }
+
+ return -EINVAL;
+}
+
+static int
+hulusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+ u32 i;
+
+ for (i = 0; i < hw->phy->supported.tx_powers_size; i++) {
+ if (hw->phy->supported.tx_powers[i] == mbm)
+ return atusb_write_subreg(hw->priv, SR_TX_PWR_212, i);
+ }
+
+ return -EINVAL;
+}
+
+#define ATUSB_MAX_ED_LEVELS 0xF
+static const s32 atusb_ed_levels[ATUSB_MAX_ED_LEVELS + 1] = {
+ -9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300,
+ -7100, -6900, -6700, -6500, -6300, -6100,
+};
+
+#define AT86RF212_MAX_TX_POWERS 0x1F
+static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = {
+ 500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
+ -800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
+ -1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
+};
+
+#define AT86RF2XX_MAX_ED_LEVELS 0xF
+static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+ -10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200,
+ -8000, -7800, -7600, -7400, -7200, -7000,
+};
+
+static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+ -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000,
+ -7800, -7600, -7400, -7200, -7000, -6800,
+};
+
+static int
+atusb_set_cca_mode(struct ieee802154_hw *hw, const struct wpan_phy_cca *cca)
+{
+ struct atusb *atusb = hw->priv;
+ u8 val;
+
+ /* mapping 802.15.4 to driver spec */
+ switch (cca->mode) {
+ case NL802154_CCA_ENERGY:
+ val = 1;
+ break;
+ case NL802154_CCA_CARRIER:
+ val = 2;
+ break;
+ case NL802154_CCA_ENERGY_CARRIER:
+ switch (cca->opt) {
+ case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
+ val = 3;
+ break;
+ case NL802154_CCA_OPT_ENERGY_CARRIER_OR:
+ val = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return atusb_write_subreg(atusb, SR_CCA_MODE, val);
+}
+
+static int hulusb_set_cca_ed_level(struct atusb *lp, int rssi_base_val)
+{
+ unsigned int cca_ed_thres;
+
+ cca_ed_thres = atusb_read_subreg(lp, SR_CCA_ED_THRES);
+
+ switch (rssi_base_val) {
+ case -98:
+ lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98;
+ lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98);
+ lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres];
+ break;
+ case -100:
+ lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+ lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
+ lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres];
+ break;
+ default:
+ WARN_ON(1);
+ }
+
+ return 0;
+}
+
+static int
+atusb_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+ struct atusb *atusb = hw->priv;
+ u32 i;
+
+ for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) {
+ if (hw->phy->supported.cca_ed_levels[i] == mbm)
+ return atusb_write_subreg(atusb, SR_CCA_ED_THRES, i);
+ }
+
+ return -EINVAL;
+}
+
+static int atusb_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+ struct atusb *atusb = hw->priv;
+ int ret = -ENOTSUPP;
+
+ if (atusb->data) {
+ ret = atusb->data->set_channel(hw, page, channel);
+ /* @@@ ugly synchronization */
+ msleep(atusb->data->t_channel_switch);
+ }
+
+ return ret;
+}
+
+static int atusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+ struct atusb *atusb = hw->priv;
+ int ret;
+
+ ret = atusb_write_subreg(atusb, SR_CHANNEL, channel);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static int hulusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+ int rc;
+ int rssi_base_val;
+
+ struct atusb *lp = hw->priv;
+
+ if (channel == 0)
+ rc = atusb_write_subreg(lp, SR_SUB_MODE, 0);
+ else
+ rc = atusb_write_subreg(lp, SR_SUB_MODE, 1);
+ if (rc < 0)
+ return rc;
+
+ if (page == 0) {
+ rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 0);
+ rssi_base_val = -100;
+ } else {
+ rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 1);
+ rssi_base_val = -98;
+ }
+ if (rc < 0)
+ return rc;
+
+ rc = hulusb_set_cca_ed_level(lp, rssi_base_val);
+ if (rc < 0)
+ return rc;
+
+ /* This sets the symbol_duration according frequency on the 212.
+ * TODO move this handling while set channel and page in cfg802154.
+ * We can do that, this timings are according 802.15.4 standard.
+ * If we do that in cfg802154, this is a more generic calculation.
+ *
+ * This should also protected from ifs_timer. Means cancel timer and
+ * init with a new value. For now, this is okay.
+ */
+ if (channel == 0) {
+ if (page == 0) {
+ /* SUB:0 and BPSK:0 -> BPSK-20 */
+ lp->hw->phy->symbol_duration = 50;
+ } else {
+ /* SUB:1 and BPSK:0 -> BPSK-40 */
+ lp->hw->phy->symbol_duration = 25;
+ }
+ } else {
+ if (page == 0)
+ /* SUB:0 and BPSK:1 -> OQPSK-100/200/400 */
+ lp->hw->phy->symbol_duration = 40;
+ else
+ /* SUB:1 and BPSK:1 -> OQPSK-250/500/1000 */
+ lp->hw->phy->symbol_duration = 16;
+ }
+
+ lp->hw->phy->lifs_period = IEEE802154_LIFS_PERIOD *
+ lp->hw->phy->symbol_duration;
+ lp->hw->phy->sifs_period = IEEE802154_SIFS_PERIOD *
+ lp->hw->phy->symbol_duration;
+
+ return atusb_write_subreg(lp, SR_CHANNEL, channel);
+}
+
+static int
+atusb_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, u8 retries)
+{
+ struct atusb *atusb = hw->priv;
+ int ret;
+
+ ret = atusb_write_subreg(atusb, SR_MIN_BE, min_be);
+ if (ret)
+ return ret;
+
+ ret = atusb_write_subreg(atusb, SR_MAX_BE, max_be);
+ if (ret)
+ return ret;
+
+ return atusb_write_subreg(atusb, SR_MAX_CSMA_RETRIES, retries);
+}
+
+static int
+hulusb_set_lbt(struct ieee802154_hw *hw, bool on)
+{
+ struct atusb *atusb = hw->priv;
+
+ return atusb_write_subreg(atusb, SR_CSMA_LBT_MODE, on);
+}
+
+static int
+atusb_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
+{
+ struct atusb *atusb = hw->priv;
+
+ return atusb_write_subreg(atusb, SR_MAX_FRAME_RETRIES, retries);
+}
+
+static int
+atusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+ struct atusb *atusb = hw->priv;
+ int ret;
+
+ if (on) {
+ ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 1);
+ if (ret < 0)
+ return ret;
+ } else {
+ ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 0);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct atusb_chip_data atusb_chip_data = {
+ .t_channel_switch = 1,
+ .rssi_base_val = -91,
+ .set_txpower = atusb_set_txpower,
+ .set_channel = atusb_set_channel,
+};
+
+static struct atusb_chip_data hulusb_chip_data = {
+ .t_channel_switch = 11,
+ .rssi_base_val = -100,
+ .set_txpower = hulusb_set_txpower,
+ .set_channel = hulusb_set_channel,
+};
+
+static const struct ieee802154_ops atusb_ops = {
+ .owner = THIS_MODULE,
+ .xmit_async = atusb_xmit,
+ .ed = atusb_ed,
+ .set_channel = atusb_channel,
+ .start = atusb_start,
+ .stop = atusb_stop,
+ .set_hw_addr_filt = atusb_set_hw_addr_filt,
+ .set_txpower = atusb_txpower,
+ .set_lbt = hulusb_set_lbt,
+ .set_cca_mode = atusb_set_cca_mode,
+ .set_cca_ed_level = atusb_set_cca_ed_level,
+ .set_csma_params = atusb_set_csma_params,
+ .set_frame_retries = atusb_set_frame_retries,
+ .set_promiscuous_mode = atusb_set_promiscuous_mode,
+};
+
+/* ----- Firmware and chip version information ----------------------------- */
+
+static int atusb_get_and_show_revision(struct atusb *atusb)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+ char *hw_name;
+ unsigned char *buffer;
+ int ret;
+
+ buffer = kmalloc(3, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ /* Get a couple of the ATMega Firmware values */
+ ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
+ ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
+ buffer, 3, 1000);
+ if (ret >= 0) {
+ atusb->fw_ver_maj = buffer[0];
+ atusb->fw_ver_min = buffer[1];
+ atusb->fw_hw_type = buffer[2];
+
+ switch (atusb->fw_hw_type) {
+ case ATUSB_HW_TYPE_100813:
+ case ATUSB_HW_TYPE_101216:
+ case ATUSB_HW_TYPE_110131:
+ hw_name = "ATUSB";
+ atusb->data = &atusb_chip_data;
+ break;
+ case ATUSB_HW_TYPE_RZUSB:
+ hw_name = "RZUSB";
+ atusb->data = &atusb_chip_data;
+ break;
+ case ATUSB_HW_TYPE_HULUSB:
+ hw_name = "HULUSB";
+ atusb->data = &hulusb_chip_data;
+ break;
+ default:
+ hw_name = "UNKNOWN";
+ atusb->err = -ENOTSUPP;
+ ret = -ENOTSUPP;
+ break;
+ }
+
+ dev_info(&usb_dev->dev,
+ "Firmware: major: %u, minor: %u, hardware type: %s (%d)\n",
+ atusb->fw_ver_maj, atusb->fw_ver_min, hw_name,
+ atusb->fw_hw_type);
+ }
+ if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 2) {
+ dev_info(&usb_dev->dev,
+ "Firmware version (%u.%u) predates our first public release.",
+ atusb->fw_ver_maj, atusb->fw_ver_min);
+ dev_info(&usb_dev->dev, "Please update to version 0.2 or newer");
+ }
+
+ kfree(buffer);
+ return ret;
+}
+
+static int atusb_get_and_show_build(struct atusb *atusb)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+ char *build;
+ int ret;
+
+ build = kmalloc(ATUSB_BUILD_SIZE + 1, GFP_KERNEL);
+ if (!build)
+ return -ENOMEM;
+
+ ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
+ ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0,
+ build, ATUSB_BUILD_SIZE, 1000);
+ if (ret >= 0) {
+ build[ret] = 0;
+ dev_info(&usb_dev->dev, "Firmware: build %s\n", build);
+ }
+
+ kfree(build);
+ return ret;
+}
+
+static int atusb_get_and_conf_chip(struct atusb *atusb)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+ u8 man_id_0, man_id_1, part_num, version_num;
+ const char *chip;
+ struct ieee802154_hw *hw = atusb->hw;
+
+ man_id_0 = atusb_read_reg(atusb, RG_MAN_ID_0);
+ man_id_1 = atusb_read_reg(atusb, RG_MAN_ID_1);
+ part_num = atusb_read_reg(atusb, RG_PART_NUM);
+ version_num = atusb_read_reg(atusb, RG_VERSION_NUM);
+
+ if (atusb->err)
+ return atusb->err;
+
+ hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
+ IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS;
+
+ hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL |
+ WPAN_PHY_FLAG_CCA_MODE;
+
+ hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+ BIT(NL802154_CCA_CARRIER) |
+ BIT(NL802154_CCA_ENERGY_CARRIER);
+ hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+ BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
+
+ hw->phy->cca.mode = NL802154_CCA_ENERGY;
+
+ hw->phy->current_page = 0;
+
+ if ((man_id_1 << 8 | man_id_0) != ATUSB_JEDEC_ATMEL) {
+ dev_err(&usb_dev->dev,
+ "non-Atmel transceiver xxxx%02x%02x\n",
+ man_id_1, man_id_0);
+ goto fail;
+ }
+
+ switch (part_num) {
+ case 2:
+ chip = "AT86RF230";
+ atusb->hw->phy->supported.channels[0] = 0x7FFF800;
+ atusb->hw->phy->current_channel = 11; /* reset default */
+ atusb->hw->phy->symbol_duration = 16;
+ atusb->hw->phy->supported.tx_powers = atusb_powers;
+ atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
+ hw->phy->supported.cca_ed_levels = atusb_ed_levels;
+ hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
+ break;
+ case 3:
+ chip = "AT86RF231";
+ atusb->hw->phy->supported.channels[0] = 0x7FFF800;
+ atusb->hw->phy->current_channel = 11; /* reset default */
+ atusb->hw->phy->symbol_duration = 16;
+ atusb->hw->phy->supported.tx_powers = atusb_powers;
+ atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
+ hw->phy->supported.cca_ed_levels = atusb_ed_levels;
+ hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
+ break;
+ case 7:
+ chip = "AT86RF212";
+ atusb->hw->flags |= IEEE802154_HW_LBT;
+ atusb->hw->phy->supported.channels[0] = 0x00007FF;
+ atusb->hw->phy->supported.channels[2] = 0x00007FF;
+ atusb->hw->phy->current_channel = 5;
+ atusb->hw->phy->symbol_duration = 25;
+ atusb->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
+ atusb->hw->phy->supported.tx_powers = at86rf212_powers;
+ atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
+ atusb->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+ atusb->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
+ break;
+ default:
+ dev_err(&usb_dev->dev,
+ "unexpected transceiver, part 0x%02x version 0x%02x\n",
+ part_num, version_num);
+ goto fail;
+ }
+
+ hw->phy->transmit_power = hw->phy->supported.tx_powers[0];
+ hw->phy->cca_ed_level = hw->phy->supported.cca_ed_levels[7];
+
+ dev_info(&usb_dev->dev, "ATUSB: %s version %d\n", chip, version_num);
+
+ return 0;
+
+fail:
+ atusb->err = -ENODEV;
+ return -ENODEV;
+}
+
+static int atusb_set_extended_addr(struct atusb *atusb)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+ unsigned char *buffer;
+ __le64 extended_addr;
+ u64 addr;
+ int ret;
+
+ /* Firmware versions before 0.3 do not support the EUI64_READ command.
+ * Just use a random address and be done.
+ */
+ if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 3) {
+ ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
+ return 0;
+ }
+
+ buffer = kmalloc(IEEE802154_EXTENDED_ADDR_LEN, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ /* Firmware is new enough so we fetch the address from EEPROM */
+ ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
+ ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0,
+ buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000);
+ if (ret < 0) {
+ dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n");
+ ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
+ kfree(buffer);
+ return ret;
+ }
+
+ memcpy(&extended_addr, buffer, IEEE802154_EXTENDED_ADDR_LEN);
+ /* Check if read address is not empty and the unicast bit is set correctly */
+ if (!ieee802154_is_valid_extended_unicast_addr(extended_addr)) {
+ dev_info(&usb_dev->dev, "no permanent extended address found, random address set\n");
+ ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
+ } else {
+ atusb->hw->phy->perm_extended_addr = extended_addr;
+ addr = swab64((__force u64)atusb->hw->phy->perm_extended_addr);
+ dev_info(&usb_dev->dev, "Read permanent extended address %8phC from device\n",
+ &addr);
+ }
+
+ kfree(buffer);
+ return ret;
+}
+
+/* ----- Setup ------------------------------------------------------------- */
+
+static int atusb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usb_dev = interface_to_usbdev(interface);
+ struct ieee802154_hw *hw;
+ struct atusb *atusb = NULL;
+ int ret = -ENOMEM;
+
+ hw = ieee802154_alloc_hw(sizeof(struct atusb), &atusb_ops);
+ if (!hw)
+ return -ENOMEM;
+
+ atusb = hw->priv;
+ atusb->hw = hw;
+ atusb->usb_dev = usb_get_dev(usb_dev);
+ usb_set_intfdata(interface, atusb);
+
+ atusb->shutdown = 0;
+ atusb->err = 0;
+ INIT_DELAYED_WORK(&atusb->work, atusb_work_urbs);
+ init_usb_anchor(&atusb->idle_urbs);
+ init_usb_anchor(&atusb->rx_urbs);
+
+ if (atusb_alloc_urbs(atusb, ATUSB_NUM_RX_URBS))
+ goto fail;
+
+ atusb->tx_dr.bRequestType = ATUSB_REQ_TO_DEV;
+ atusb->tx_dr.bRequest = ATUSB_TX;
+ atusb->tx_dr.wValue = cpu_to_le16(0);
+
+ atusb->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!atusb->tx_urb)
+ goto fail;
+
+ hw->parent = &usb_dev->dev;
+
+ atusb_command(atusb, ATUSB_RF_RESET, 0);
+ atusb_get_and_conf_chip(atusb);
+ atusb_get_and_show_revision(atusb);
+ atusb_get_and_show_build(atusb);
+ atusb_set_extended_addr(atusb);
+
+ if ((atusb->fw_ver_maj == 0 && atusb->fw_ver_min >= 3) || atusb->fw_ver_maj > 0)
+ hw->flags |= IEEE802154_HW_FRAME_RETRIES;
+
+ ret = atusb_get_and_clear_error(atusb);
+ if (ret) {
+ dev_err(&atusb->usb_dev->dev,
+ "%s: initialization failed, error = %d\n",
+ __func__, ret);
+ goto fail;
+ }
+
+ ret = ieee802154_register_hw(hw);
+ if (ret)
+ goto fail;
+
+ /* If we just powered on, we're now in P_ON and need to enter TRX_OFF
+ * explicitly. Any resets after that will send us straight to TRX_OFF,
+ * making the command below redundant.
+ */
+ atusb_write_reg(atusb, RG_TRX_STATE, STATE_FORCE_TRX_OFF);
+ msleep(1); /* reset => TRX_OFF, tTR13 = 37 us */
+
+#if 0
+ /* Calculating the maximum time available to empty the frame buffer
+ * on reception:
+ *
+ * According to [1], the inter-frame gap is
+ * R * 20 * 16 us + 128 us
+ * where R is a random number from 0 to 7. Furthermore, we have 20 bit
+ * times (80 us at 250 kbps) of SHR of the next frame before the
+ * transceiver begins storing data in the frame buffer.
+ *
+ * This yields a minimum time of 208 us between the last data of a
+ * frame and the first data of the next frame. This time is further
+ * reduced by interrupt latency in the atusb firmware.
+ *
+ * atusb currently needs about 500 us to retrieve a maximum-sized
+ * frame. We therefore have to allow reception of a new frame to begin
+ * while we retrieve the previous frame.
+ *
+ * [1] "JN-AN-1035 Calculating data rates in an IEEE 802.15.4-based
+ * network", Jennic 2006.
+ * http://www.jennic.com/download_file.php?supportFile=JN-AN-1035%20Calculating%20802-15-4%20Data%20Rates-1v0.pdf
+ */
+
+ atusb_write_subreg(atusb, SR_RX_SAFE_MODE, 1);
+#endif
+ atusb_write_reg(atusb, RG_IRQ_MASK, 0xff);
+
+ ret = atusb_get_and_clear_error(atusb);
+ if (!ret)
+ return 0;
+
+ dev_err(&atusb->usb_dev->dev,
+ "%s: setup failed, error = %d\n",
+ __func__, ret);
+
+ ieee802154_unregister_hw(hw);
+fail:
+ atusb_free_urbs(atusb);
+ usb_kill_urb(atusb->tx_urb);
+ usb_free_urb(atusb->tx_urb);
+ usb_put_dev(usb_dev);
+ ieee802154_free_hw(hw);
+ return ret;
+}
+
+static void atusb_disconnect(struct usb_interface *interface)
+{
+ struct atusb *atusb = usb_get_intfdata(interface);
+
+ dev_dbg(&atusb->usb_dev->dev, "%s\n", __func__);
+
+ atusb->shutdown = 1;
+ cancel_delayed_work_sync(&atusb->work);
+
+ usb_kill_anchored_urbs(&atusb->rx_urbs);
+ atusb_free_urbs(atusb);
+ usb_kill_urb(atusb->tx_urb);
+ usb_free_urb(atusb->tx_urb);
+
+ ieee802154_unregister_hw(atusb->hw);
+
+ ieee802154_free_hw(atusb->hw);
+
+ usb_set_intfdata(interface, NULL);
+ usb_put_dev(atusb->usb_dev);
+
+ pr_debug("%s done\n", __func__);
+}
+
+/* The devices we work with */
+static const struct usb_device_id atusb_device_table[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = ATUSB_VENDOR_ID,
+ .idProduct = ATUSB_PRODUCT_ID,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC
+ },
+ /* end with null element */
+ {}
+};
+MODULE_DEVICE_TABLE(usb, atusb_device_table);
+
+static struct usb_driver atusb_driver = {
+ .name = "atusb",
+ .probe = atusb_probe,
+ .disconnect = atusb_disconnect,
+ .id_table = atusb_device_table,
+};
+module_usb_driver(atusb_driver);
+
+MODULE_AUTHOR("Alexander Aring <alex.aring@gmail.com>");
+MODULE_AUTHOR("Richard Sharpe <realrichardsharpe@gmail.com>");
+MODULE_AUTHOR("Stefan Schmidt <stefan@datenfreihafen.org>");
+MODULE_AUTHOR("Werner Almesberger <werner@almesberger.net>");
+MODULE_AUTHOR("Josef Filzmaier <j.filzmaier@gmx.at>");
+MODULE_DESCRIPTION("ATUSB IEEE 802.15.4 Driver");
+MODULE_LICENSE("GPL");