v4.19.13 snapshot.
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
new file mode 100644
index 0000000..f2f0264
--- /dev/null
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -0,0 +1,208 @@
+#
+# 8390 device configuration
+#
+
+config NET_VENDOR_8390
+ bool "National Semiconductor 8390 devices"
+ default y
+ depends on NET_VENDOR_NATSEMI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Western Digital cards. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+if NET_VENDOR_8390
+
+config PCMCIA_AXNET
+ tristate "Asix AX88190 PCMCIA support"
+ depends on PCMCIA
+ ---help---
+ Say Y here if you intend to attach an Asix AX88190-based PCMCIA
+ (PC-card) Fast Ethernet card to your computer. These cards are
+ nearly NE2000 compatible but need a separate driver due to a few
+ misfeatures.
+
+ To compile this driver as a module, choose M here: the module will be
+ called axnet_cs. If unsure, say N.
+
+config AX88796
+ tristate "ASIX AX88796 NE2000 clone support" if !ZORRO
+ depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST)
+ select CRC32
+ select PHYLIB
+ select MDIO_BITBANG
+ ---help---
+ AX88796 driver, using platform bus to provide
+ chip detection and resources
+
+config AX88796_93CX6
+ bool "ASIX AX88796 external 93CX6 eeprom support"
+ depends on AX88796
+ select EEPROM_93CX6
+ ---help---
+ Select this if your platform comes with an external 93CX6 eeprom.
+
+config XSURF100
+ tristate "Amiga XSurf 100 AX88796/NE2000 clone support"
+ depends on ZORRO
+ select AX88796
+ select ASIX_PHY
+ help
+ This driver is for the Individual Computers X-Surf 100 Ethernet
+ card (based on the Asix AX88796 chip). If you have such a card,
+ say Y. Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called xsurf100.
+
+config HYDRA
+ tristate "Hydra support"
+ depends on ZORRO
+ select CRC32
+ ---help---
+ If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called hydra.
+
+config ARM_ETHERH
+ tristate "I-cubed EtherH/ANT EtherM support"
+ depends on ARM && ARCH_ACORN
+ select CRC32
+ ---help---
+ If you have an Acorn system with one of these network cards, you
+ should say Y to this option if you wish to use it with Linux.
+
+config MAC8390
+ tristate "Macintosh NS 8390 based ethernet cards"
+ depends on MAC
+ select CRC32
+ ---help---
+ If you want to include a driver to support Nubus or LC-PDS
+ Ethernet cards using an NS8390 chipset or its equivalent, say Y.
+
+config MCF8390
+ tristate "ColdFire NS8390 based Ethernet support"
+ depends on COLDFIRE
+ select CRC32
+ ---help---
+ This driver is for Ethernet devices using an NS8390-compatible
+ chipset on many common ColdFire CPU based boards. Many of the older
+ Freescale dev boards use this, and some other common boards like
+ some SnapGear routers do as well.
+
+ If you have one of these boards and want to use the network interface
+ on them then choose Y. To compile this driver as a module, choose M
+ here, the module will be called mcf8390.
+
+config NE2000
+ tristate "NE2000/NE1000 support"
+ depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y here.
+ Many Ethernet cards without a specific driver are compatible with
+ the NE2000.
+
+ If you have a PCI NE2000 card however, say N here and Y to "PCI
+ NE2000 and clone support" below.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ne.
+
+config NE2K_PCI
+ tristate "PCI NE2000 and clones support (see help)"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver is for NE2000 compatible PCI cards. It will not work
+ with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
+ support" below). If you have a PCI NE2000 network (Ethernet) card,
+ say Y here.
+
+ This driver also works for the following NE2000 clone cards:
+ RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
+ NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
+ Holtek HT80232 Holtek HT80229
+
+ To compile this driver as a module, choose M here. The module
+ will be called ne2k-pci.
+
+config APNE
+ tristate "PCMCIA NE2000 support"
+ depends on AMIGA_PCMCIA
+ select CRC32
+ ---help---
+ If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
+ say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called apne.
+
+config PCMCIA_PCNET
+ tristate "NE2000 compatible PCMCIA support"
+ depends on PCMCIA
+ select CRC32
+ ---help---
+ Say Y here if you intend to attach an NE2000 compatible PCMCIA
+ (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcnet_cs. If unsure, say N.
+
+config STNIC
+ tristate "National DP83902AV support"
+ depends on SUPERH
+ select CRC32
+ ---help---
+ Support for cards based on the National Semiconductor DP83902AV
+ ST-NIC Serial Network Interface Controller for Twisted Pair. This
+ is a 10Mbit/sec Ethernet controller. Product overview and specs at
+ <http://www.national.com/pf/DP/DP83902A.html>.
+
+ If unsure, say N.
+
+config ULTRA
+ tristate "SMC Ultra support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y here.
+
+ Important: There have been many reports that, with some motherboards
+ mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
+ such as some BusLogic models) causes corruption problems with many
+ operating systems. The Linux smc-ultra driver has a work-around for
+ this but keep it in mind if you have such a SCSI card and have
+ problems.
+
+ To compile this driver as a module, choose M here. The module
+ will be called smc-ultra.
+
+config WD80x3
+ tristate "WD80*3 support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y here.
+
+ To compile this driver as a module, choose M here. The module
+ will be called wd.
+
+config ZORRO8390
+ tristate "Zorro NS8390-based Ethernet support"
+ depends on ZORRO
+ select CRC32
+ ---help---
+ This driver is for Zorro Ethernet cards using an NS8390-compatible
+ chipset, like the Village Tronic Ariadne II and the Individual
+ Computers X-Surf Ethernet cards. If you have such a card, say Y.
+ Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called zorro8390.
+
+endif # NET_VENDOR_8390