v4.19.13 snapshot.
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
new file mode 100644
index 0000000..44d750d
--- /dev/null
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -0,0 +1,596 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2009 Silicon Graphics, Inc. All rights reserved.
+ */
+
+/*
+ * Cross Partition Network Interface (XPNET) support
+ *
+ * XPNET provides a virtual network layered on top of the Cross
+ * Partition communication layer.
+ *
+ * XPNET provides direct point-to-point and broadcast-like support
+ * for an ethernet-like device. The ethernet broadcast medium is
+ * replaced with a point-to-point message structure which passes
+ * pointers to a DMA-capable block that a remote partition should
+ * retrieve and pass to the upper level networking layer.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include "xp.h"
+
+/*
+ * The message payload transferred by XPC.
+ *
+ * buf_pa is the physical address where the DMA should pull from.
+ *
+ * NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a
+ * cacheline boundary. To accomplish this, we record the number of
+ * bytes from the beginning of the first cacheline to the first useful
+ * byte of the skb (leadin_ignore) and the number of bytes from the
+ * last useful byte of the skb to the end of the last cacheline
+ * (tailout_ignore).
+ *
+ * size is the number of bytes to transfer which includes the skb->len
+ * (useful bytes of the senders skb) plus the leadin and tailout
+ */
+struct xpnet_message {
+ u16 version; /* Version for this message */
+ u16 embedded_bytes; /* #of bytes embedded in XPC message */
+ u32 magic; /* Special number indicating this is xpnet */
+ unsigned long buf_pa; /* phys address of buffer to retrieve */
+ u32 size; /* #of bytes in buffer */
+ u8 leadin_ignore; /* #of bytes to ignore at the beginning */
+ u8 tailout_ignore; /* #of bytes to ignore at the end */
+ unsigned char data; /* body of small packets */
+};
+
+/*
+ * Determine the size of our message, the cacheline aligned size,
+ * and then the number of message will request from XPC.
+ *
+ * XPC expects each message to exist in an individual cacheline.
+ */
+#define XPNET_MSG_SIZE XPC_MSG_PAYLOAD_MAX_SIZE
+#define XPNET_MSG_DATA_MAX \
+ (XPNET_MSG_SIZE - offsetof(struct xpnet_message, data))
+#define XPNET_MSG_NENTRIES (PAGE_SIZE / XPC_MSG_MAX_SIZE)
+
+#define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1)
+#define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1)
+
+/*
+ * Version number of XPNET implementation. XPNET can always talk to versions
+ * with same major #, and never talk to versions with a different version.
+ */
+#define _XPNET_VERSION(_major, _minor) (((_major) << 4) | (_minor))
+#define XPNET_VERSION_MAJOR(_v) ((_v) >> 4)
+#define XPNET_VERSION_MINOR(_v) ((_v) & 0xf)
+
+#define XPNET_VERSION _XPNET_VERSION(1, 0) /* version 1.0 */
+#define XPNET_VERSION_EMBED _XPNET_VERSION(1, 1) /* version 1.1 */
+#define XPNET_MAGIC 0x88786984 /* "XNET" */
+
+#define XPNET_VALID_MSG(_m) \
+ ((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \
+ && (msg->magic == XPNET_MAGIC))
+
+#define XPNET_DEVICE_NAME "xp0"
+
+/*
+ * When messages are queued with xpc_send_notify, a kmalloc'd buffer
+ * of the following type is passed as a notification cookie. When the
+ * notification function is called, we use the cookie to decide
+ * whether all outstanding message sends have completed. The skb can
+ * then be released.
+ */
+struct xpnet_pending_msg {
+ struct sk_buff *skb;
+ atomic_t use_count;
+};
+
+struct net_device *xpnet_device;
+
+/*
+ * When we are notified of other partitions activating, we add them to
+ * our bitmask of partitions to which we broadcast.
+ */
+static unsigned long *xpnet_broadcast_partitions;
+/* protect above */
+static DEFINE_SPINLOCK(xpnet_broadcast_lock);
+
+/*
+ * Since the Block Transfer Engine (BTE) is being used for the transfer
+ * and it relies upon cache-line size transfers, we need to reserve at
+ * least one cache-line for head and tail alignment. The BTE is
+ * limited to 8MB transfers.
+ *
+ * Testing has shown that changing MTU to greater than 64KB has no effect
+ * on TCP as the two sides negotiate a Max Segment Size that is limited
+ * to 64K. Other protocols May use packets greater than this, but for
+ * now, the default is 64KB.
+ */
+#define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES)
+/* 68 comes from min TCP+IP+MAC header */
+#define XPNET_MIN_MTU 68
+/* 32KB has been determined to be the ideal */
+#define XPNET_DEF_MTU (0x8000UL)
+
+/*
+ * The partid is encapsulated in the MAC address beginning in the following
+ * octet and it consists of two octets.
+ */
+#define XPNET_PARTID_OCTET 2
+
+/* Define the XPNET debug device structures to be used with dev_dbg() et al */
+
+struct device_driver xpnet_dbg_name = {
+ .name = "xpnet"
+};
+
+struct device xpnet_dbg_subname = {
+ .init_name = "", /* set to "" */
+ .driver = &xpnet_dbg_name
+};
+
+struct device *xpnet = &xpnet_dbg_subname;
+
+/*
+ * Packet was recevied by XPC and forwarded to us.
+ */
+static void
+xpnet_receive(short partid, int channel, struct xpnet_message *msg)
+{
+ struct sk_buff *skb;
+ void *dst;
+ enum xp_retval ret;
+
+ if (!XPNET_VALID_MSG(msg)) {
+ /*
+ * Packet with a different XPC version. Ignore.
+ */
+ xpc_received(partid, channel, (void *)msg);
+
+ xpnet_device->stats.rx_errors++;
+
+ return;
+ }
+ dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size,
+ msg->leadin_ignore, msg->tailout_ignore);
+
+ /* reserve an extra cache line */
+ skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES);
+ if (!skb) {
+ dev_err(xpnet, "failed on dev_alloc_skb(%d)\n",
+ msg->size + L1_CACHE_BYTES);
+
+ xpc_received(partid, channel, (void *)msg);
+
+ xpnet_device->stats.rx_errors++;
+
+ return;
+ }
+
+ /*
+ * The allocated skb has some reserved space.
+ * In order to use xp_remote_memcpy(), we need to get the
+ * skb->data pointer moved forward.
+ */
+ skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
+ (L1_CACHE_BYTES - 1)) +
+ msg->leadin_ignore));
+
+ /*
+ * Update the tail pointer to indicate data actually
+ * transferred.
+ */
+ skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore));
+
+ /*
+ * Move the data over from the other side.
+ */
+ if ((XPNET_VERSION_MINOR(msg->version) == 1) &&
+ (msg->embedded_bytes != 0)) {
+ dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, "
+ "%lu)\n", skb->data, &msg->data,
+ (size_t)msg->embedded_bytes);
+
+ skb_copy_to_linear_data(skb, &msg->data,
+ (size_t)msg->embedded_bytes);
+ } else {
+ dst = (void *)((u64)skb->data & ~(L1_CACHE_BYTES - 1));
+ dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
+ "xp_remote_memcpy(0x%p, 0x%p, %hu)\n", dst,
+ (void *)msg->buf_pa, msg->size);
+
+ ret = xp_remote_memcpy(xp_pa(dst), msg->buf_pa, msg->size);
+ if (ret != xpSuccess) {
+ /*
+ * !!! Need better way of cleaning skb. Currently skb
+ * !!! appears in_use and we can't just call
+ * !!! dev_kfree_skb.
+ */
+ dev_err(xpnet, "xp_remote_memcpy(0x%p, 0x%p, 0x%hx) "
+ "returned error=0x%x\n", dst,
+ (void *)msg->buf_pa, msg->size, ret);
+
+ xpc_received(partid, channel, (void *)msg);
+
+ xpnet_device->stats.rx_errors++;
+
+ return;
+ }
+ }
+
+ dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
+ "skb->end=0x%p skb->len=%d\n", (void *)skb->head,
+ (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
+ skb->len);
+
+ skb->protocol = eth_type_trans(skb, xpnet_device);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ dev_dbg(xpnet, "passing skb to network layer\n"
+ "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
+ "skb->end=0x%p skb->len=%d\n",
+ (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
+ skb_end_pointer(skb), skb->len);
+
+ xpnet_device->stats.rx_packets++;
+ xpnet_device->stats.rx_bytes += skb->len + ETH_HLEN;
+
+ netif_rx_ni(skb);
+ xpc_received(partid, channel, (void *)msg);
+}
+
+/*
+ * This is the handler which XPC calls during any sort of change in
+ * state or message reception on a connection.
+ */
+static void
+xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
+ void *data, void *key)
+{
+ DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
+ DBUG_ON(channel != XPC_NET_CHANNEL);
+
+ switch (reason) {
+ case xpMsgReceived: /* message received */
+ DBUG_ON(data == NULL);
+
+ xpnet_receive(partid, channel, (struct xpnet_message *)data);
+ break;
+
+ case xpConnected: /* connection completed to a partition */
+ spin_lock_bh(&xpnet_broadcast_lock);
+ __set_bit(partid, xpnet_broadcast_partitions);
+ spin_unlock_bh(&xpnet_broadcast_lock);
+
+ netif_carrier_on(xpnet_device);
+
+ dev_dbg(xpnet, "%s connected to partition %d\n",
+ xpnet_device->name, partid);
+ break;
+
+ default:
+ spin_lock_bh(&xpnet_broadcast_lock);
+ __clear_bit(partid, xpnet_broadcast_partitions);
+ spin_unlock_bh(&xpnet_broadcast_lock);
+
+ if (bitmap_empty((unsigned long *)xpnet_broadcast_partitions,
+ xp_max_npartitions)) {
+ netif_carrier_off(xpnet_device);
+ }
+
+ dev_dbg(xpnet, "%s disconnected from partition %d\n",
+ xpnet_device->name, partid);
+ break;
+ }
+}
+
+static int
+xpnet_dev_open(struct net_device *dev)
+{
+ enum xp_retval ret;
+
+ dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
+ "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
+ (unsigned long)XPNET_MSG_SIZE,
+ (unsigned long)XPNET_MSG_NENTRIES,
+ (unsigned long)XPNET_MAX_KTHREADS,
+ (unsigned long)XPNET_MAX_IDLE_KTHREADS);
+
+ ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
+ XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
+ XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS);
+ if (ret != xpSuccess) {
+ dev_err(xpnet, "ifconfig up of %s failed on XPC connect, "
+ "ret=%d\n", dev->name, ret);
+
+ return -ENOMEM;
+ }
+
+ dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name);
+
+ return 0;
+}
+
+static int
+xpnet_dev_stop(struct net_device *dev)
+{
+ xpc_disconnect(XPC_NET_CHANNEL);
+
+ dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name);
+
+ return 0;
+}
+
+/*
+ * Notification that the other end has received the message and
+ * DMA'd the skb information. At this point, they are done with
+ * our side. When all recipients are done processing, we
+ * release the skb and then release our pending message structure.
+ */
+static void
+xpnet_send_completed(enum xp_retval reason, short partid, int channel,
+ void *__qm)
+{
+ struct xpnet_pending_msg *queued_msg = (struct xpnet_pending_msg *)__qm;
+
+ DBUG_ON(queued_msg == NULL);
+
+ dev_dbg(xpnet, "message to %d notified with reason %d\n",
+ partid, reason);
+
+ if (atomic_dec_return(&queued_msg->use_count) == 0) {
+ dev_dbg(xpnet, "all acks for skb->head=-x%p\n",
+ (void *)queued_msg->skb->head);
+
+ dev_kfree_skb_any(queued_msg->skb);
+ kfree(queued_msg);
+ }
+}
+
+static void
+xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg,
+ u64 start_addr, u64 end_addr, u16 embedded_bytes, int dest_partid)
+{
+ u8 msg_buffer[XPNET_MSG_SIZE];
+ struct xpnet_message *msg = (struct xpnet_message *)&msg_buffer;
+ u16 msg_size = sizeof(struct xpnet_message);
+ enum xp_retval ret;
+
+ msg->embedded_bytes = embedded_bytes;
+ if (unlikely(embedded_bytes != 0)) {
+ msg->version = XPNET_VERSION_EMBED;
+ dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
+ &msg->data, skb->data, (size_t)embedded_bytes);
+ skb_copy_from_linear_data(skb, &msg->data,
+ (size_t)embedded_bytes);
+ msg_size += embedded_bytes - 1;
+ } else {
+ msg->version = XPNET_VERSION;
+ }
+ msg->magic = XPNET_MAGIC;
+ msg->size = end_addr - start_addr;
+ msg->leadin_ignore = (u64)skb->data - start_addr;
+ msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
+ msg->buf_pa = xp_pa((void *)start_addr);
+
+ dev_dbg(xpnet, "sending XPC message to %d:%d\n"
+ "msg->buf_pa=0x%lx, msg->size=%u, "
+ "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
+ dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
+ msg->leadin_ignore, msg->tailout_ignore);
+
+ atomic_inc(&queued_msg->use_count);
+
+ ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, msg,
+ msg_size, xpnet_send_completed, queued_msg);
+ if (unlikely(ret != xpSuccess))
+ atomic_dec(&queued_msg->use_count);
+}
+
+/*
+ * Network layer has formatted a packet (skb) and is ready to place it
+ * "on the wire". Prepare and send an xpnet_message to all partitions
+ * which have connected with us and are targets of this packet.
+ *
+ * MAC-NOTE: For the XPNET driver, the MAC address contains the
+ * destination partid. If the destination partid octets are 0xffff,
+ * this packet is to be broadcast to all connected partitions.
+ */
+static netdev_tx_t
+xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct xpnet_pending_msg *queued_msg;
+ u64 start_addr, end_addr;
+ short dest_partid;
+ u16 embedded_bytes = 0;
+
+ dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
+ "skb->end=0x%p skb->len=%d\n", (void *)skb->head,
+ (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
+ skb->len);
+
+ if (skb->data[0] == 0x33) {
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK; /* nothing needed to be done */
+ }
+
+ /*
+ * The xpnet_pending_msg tracks how many outstanding
+ * xpc_send_notifies are relying on this skb. When none
+ * remain, release the skb.
+ */
+ queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC);
+ if (queued_msg == NULL) {
+ dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping "
+ "packet\n", sizeof(struct xpnet_pending_msg));
+
+ dev->stats.tx_errors++;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ /* get the beginning of the first cacheline and end of last */
+ start_addr = ((u64)skb->data & ~(L1_CACHE_BYTES - 1));
+ end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb));
+
+ /* calculate how many bytes to embed in the XPC message */
+ if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
+ /* skb->data does fit so embed */
+ embedded_bytes = skb->len;
+ }
+
+ /*
+ * Since the send occurs asynchronously, we set the count to one
+ * and begin sending. Any sends that happen to complete before
+ * we are done sending will not free the skb. We will be left
+ * with that task during exit. This also handles the case of
+ * a packet destined for a partition which is no longer up.
+ */
+ atomic_set(&queued_msg->use_count, 1);
+ queued_msg->skb = skb;
+
+ if (skb->data[0] == 0xff) {
+ /* we are being asked to broadcast to all partitions */
+ for_each_set_bit(dest_partid, xpnet_broadcast_partitions,
+ xp_max_npartitions) {
+
+ xpnet_send(skb, queued_msg, start_addr, end_addr,
+ embedded_bytes, dest_partid);
+ }
+ } else {
+ dest_partid = (short)skb->data[XPNET_PARTID_OCTET + 1];
+ dest_partid |= (short)skb->data[XPNET_PARTID_OCTET + 0] << 8;
+
+ if (dest_partid >= 0 &&
+ dest_partid < xp_max_npartitions &&
+ test_bit(dest_partid, xpnet_broadcast_partitions) != 0) {
+
+ xpnet_send(skb, queued_msg, start_addr, end_addr,
+ embedded_bytes, dest_partid);
+ }
+ }
+
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+
+ if (atomic_dec_return(&queued_msg->use_count) == 0) {
+ dev_kfree_skb(skb);
+ kfree(queued_msg);
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/*
+ * Deal with transmit timeouts coming from the network layer.
+ */
+static void
+xpnet_dev_tx_timeout(struct net_device *dev)
+{
+ dev->stats.tx_errors++;
+}
+
+static const struct net_device_ops xpnet_netdev_ops = {
+ .ndo_open = xpnet_dev_open,
+ .ndo_stop = xpnet_dev_stop,
+ .ndo_start_xmit = xpnet_dev_hard_start_xmit,
+ .ndo_tx_timeout = xpnet_dev_tx_timeout,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int __init
+xpnet_init(void)
+{
+ int result;
+
+ if (!is_shub() && !is_uv())
+ return -ENODEV;
+
+ dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
+
+ xpnet_broadcast_partitions = kcalloc(BITS_TO_LONGS(xp_max_npartitions),
+ sizeof(long),
+ GFP_KERNEL);
+ if (xpnet_broadcast_partitions == NULL)
+ return -ENOMEM;
+
+ /*
+ * use ether_setup() to init the majority of our device
+ * structure and then override the necessary pieces.
+ */
+ xpnet_device = alloc_netdev(0, XPNET_DEVICE_NAME, NET_NAME_UNKNOWN,
+ ether_setup);
+ if (xpnet_device == NULL) {
+ kfree(xpnet_broadcast_partitions);
+ return -ENOMEM;
+ }
+
+ netif_carrier_off(xpnet_device);
+
+ xpnet_device->netdev_ops = &xpnet_netdev_ops;
+ xpnet_device->mtu = XPNET_DEF_MTU;
+ xpnet_device->min_mtu = XPNET_MIN_MTU;
+ xpnet_device->max_mtu = XPNET_MAX_MTU;
+
+ /*
+ * Multicast assumes the LSB of the first octet is set for multicast
+ * MAC addresses. We chose the first octet of the MAC to be unlikely
+ * to collide with any vendor's officially issued MAC.
+ */
+ xpnet_device->dev_addr[0] = 0x02; /* locally administered, no OUI */
+
+ xpnet_device->dev_addr[XPNET_PARTID_OCTET + 1] = xp_partition_id;
+ xpnet_device->dev_addr[XPNET_PARTID_OCTET + 0] = (xp_partition_id >> 8);
+
+ /*
+ * ether_setup() sets this to a multicast device. We are
+ * really not supporting multicast at this time.
+ */
+ xpnet_device->flags &= ~IFF_MULTICAST;
+
+ /*
+ * No need to checksum as it is a DMA transfer. The BTE will
+ * report an error if the data is not retrievable and the
+ * packet will be dropped.
+ */
+ xpnet_device->features = NETIF_F_HW_CSUM;
+
+ result = register_netdev(xpnet_device);
+ if (result != 0) {
+ free_netdev(xpnet_device);
+ kfree(xpnet_broadcast_partitions);
+ }
+
+ return result;
+}
+
+module_init(xpnet_init);
+
+static void __exit
+xpnet_exit(void)
+{
+ dev_info(xpnet, "unregistering network device %s\n",
+ xpnet_device[0].name);
+
+ unregister_netdev(xpnet_device);
+ free_netdev(xpnet_device);
+ kfree(xpnet_broadcast_partitions);
+}
+
+module_exit(xpnet_exit);
+
+MODULE_AUTHOR("Silicon Graphics, Inc.");
+MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)");
+MODULE_LICENSE("GPL");