v4.19.13 snapshot.
diff --git a/drivers/misc/mei/Kconfig b/drivers/misc/mei/Kconfig
new file mode 100644
index 0000000..c49e1d2
--- /dev/null
+++ b/drivers/misc/mei/Kconfig
@@ -0,0 +1,45 @@
+config INTEL_MEI
+ tristate "Intel Management Engine Interface"
+ depends on X86 && PCI
+ help
+ The Intel Management Engine (Intel ME) provides Manageability,
+ Security and Media services for system containing Intel chipsets.
+ if selected /dev/mei misc device will be created.
+
+ For more information see
+ <http://software.intel.com/en-us/manageability/>
+
+config INTEL_MEI_ME
+ tristate "ME Enabled Intel Chipsets"
+ select INTEL_MEI
+ depends on X86 && PCI
+ help
+ MEI support for ME Enabled Intel chipsets.
+
+ Supported Chipsets are:
+ 7 Series Chipset Family
+ 6 Series Chipset Family
+ 5 Series Chipset Family
+ 4 Series Chipset Family
+ Mobile 4 Series Chipset Family
+ ICH9
+ 82946GZ/GL
+ 82G35 Express
+ 82Q963/Q965
+ 82P965/G965
+ Mobile PM965/GM965
+ Mobile GME965/GLE960
+ 82Q35 Express
+ 82G33/G31/P35/P31 Express
+ 82Q33 Express
+ 82X38/X48 Express
+
+config INTEL_MEI_TXE
+ tristate "Intel Trusted Execution Environment with ME Interface"
+ select INTEL_MEI
+ depends on X86 && PCI
+ help
+ MEI Support for Trusted Execution Environment device on Intel SoCs
+
+ Supported SoCs:
+ Intel Bay Trail
diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile
new file mode 100644
index 0000000..cd6825a
--- /dev/null
+++ b/drivers/misc/mei/Makefile
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile - Intel Management Engine Interface (Intel MEI) Linux driver
+# Copyright (c) 2010-2014, Intel Corporation.
+#
+obj-$(CONFIG_INTEL_MEI) += mei.o
+mei-objs := init.o
+mei-objs += hbm.o
+mei-objs += interrupt.o
+mei-objs += client.o
+mei-objs += main.o
+mei-objs += bus.o
+mei-objs += bus-fixup.o
+mei-$(CONFIG_DEBUG_FS) += debugfs.o
+
+obj-$(CONFIG_INTEL_MEI_ME) += mei-me.o
+mei-me-objs := pci-me.o
+mei-me-objs += hw-me.o
+
+obj-$(CONFIG_INTEL_MEI_TXE) += mei-txe.o
+mei-txe-objs := pci-txe.o
+mei-txe-objs += hw-txe.o
+
+mei-$(CONFIG_EVENT_TRACING) += mei-trace.o
+CFLAGS_mei-trace.o = -I$(src)
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
new file mode 100644
index 0000000..a6f41f9
--- /dev/null
+++ b/drivers/misc/mei/bus-fixup.c
@@ -0,0 +1,497 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2018, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/uuid.h>
+
+#include <linux/mei_cl_bus.h>
+
+#include "mei_dev.h"
+#include "client.h"
+
+#define MEI_UUID_NFC_INFO UUID_LE(0xd2de1625, 0x382d, 0x417d, \
+ 0x48, 0xa4, 0xef, 0xab, 0xba, 0x8a, 0x12, 0x06)
+
+static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO;
+
+#define MEI_UUID_NFC_HCI UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, \
+ 0x94, 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c)
+
+#define MEI_UUID_WD UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, \
+ 0x89, 0x9D, 0xA9, 0x15, 0x14, 0xCB, 0x32, 0xAB)
+
+#define MEI_UUID_MKHIF_FIX UUID_LE(0x55213584, 0x9a29, 0x4916, \
+ 0xba, 0xdf, 0xf, 0xb7, 0xed, 0x68, 0x2a, 0xeb)
+
+#define MEI_UUID_ANY NULL_UUID_LE
+
+/**
+ * number_of_connections - determine whether an client be on the bus
+ * according number of connections
+ * We support only clients:
+ * 1. with single connection
+ * 2. and fixed clients (max_number_of_connections == 0)
+ *
+ * @cldev: me clients device
+ */
+static void number_of_connections(struct mei_cl_device *cldev)
+{
+ dev_dbg(&cldev->dev, "running hook %s\n", __func__);
+
+ if (cldev->me_cl->props.max_number_of_connections > 1)
+ cldev->do_match = 0;
+}
+
+/**
+ * blacklist - blacklist a client from the bus
+ *
+ * @cldev: me clients device
+ */
+static void blacklist(struct mei_cl_device *cldev)
+{
+ dev_dbg(&cldev->dev, "running hook %s\n", __func__);
+
+ cldev->do_match = 0;
+}
+
+#define OSTYPE_LINUX 2
+struct mei_os_ver {
+ __le16 build;
+ __le16 reserved1;
+ u8 os_type;
+ u8 major;
+ u8 minor;
+ u8 reserved2;
+} __packed;
+
+#define MKHI_FEATURE_PTT 0x10
+
+struct mkhi_rule_id {
+ __le16 rule_type;
+ u8 feature_id;
+ u8 reserved;
+} __packed;
+
+struct mkhi_fwcaps {
+ struct mkhi_rule_id id;
+ u8 len;
+ u8 data[0];
+} __packed;
+
+struct mkhi_fw_ver_block {
+ u16 minor;
+ u8 major;
+ u8 platform;
+ u16 buildno;
+ u16 hotfix;
+} __packed;
+
+struct mkhi_fw_ver {
+ struct mkhi_fw_ver_block ver[MEI_MAX_FW_VER_BLOCKS];
+} __packed;
+
+#define MKHI_FWCAPS_GROUP_ID 0x3
+#define MKHI_FWCAPS_SET_OS_VER_APP_RULE_CMD 6
+#define MKHI_GEN_GROUP_ID 0xFF
+#define MKHI_GEN_GET_FW_VERSION_CMD 0x2
+struct mkhi_msg_hdr {
+ u8 group_id;
+ u8 command;
+ u8 reserved;
+ u8 result;
+} __packed;
+
+struct mkhi_msg {
+ struct mkhi_msg_hdr hdr;
+ u8 data[0];
+} __packed;
+
+#define MKHI_OSVER_BUF_LEN (sizeof(struct mkhi_msg_hdr) + \
+ sizeof(struct mkhi_fwcaps) + \
+ sizeof(struct mei_os_ver))
+static int mei_osver(struct mei_cl_device *cldev)
+{
+ const size_t size = MKHI_OSVER_BUF_LEN;
+ char buf[MKHI_OSVER_BUF_LEN];
+ struct mkhi_msg *req;
+ struct mkhi_fwcaps *fwcaps;
+ struct mei_os_ver *os_ver;
+ unsigned int mode = MEI_CL_IO_TX_BLOCKING | MEI_CL_IO_TX_INTERNAL;
+
+ memset(buf, 0, size);
+
+ req = (struct mkhi_msg *)buf;
+ req->hdr.group_id = MKHI_FWCAPS_GROUP_ID;
+ req->hdr.command = MKHI_FWCAPS_SET_OS_VER_APP_RULE_CMD;
+
+ fwcaps = (struct mkhi_fwcaps *)req->data;
+
+ fwcaps->id.rule_type = 0x0;
+ fwcaps->id.feature_id = MKHI_FEATURE_PTT;
+ fwcaps->len = sizeof(*os_ver);
+ os_ver = (struct mei_os_ver *)fwcaps->data;
+ os_ver->os_type = OSTYPE_LINUX;
+
+ return __mei_cl_send(cldev->cl, buf, size, mode);
+}
+
+#define MKHI_FWVER_BUF_LEN (sizeof(struct mkhi_msg_hdr) + \
+ sizeof(struct mkhi_fw_ver))
+#define MKHI_FWVER_LEN(__num) (sizeof(struct mkhi_msg_hdr) + \
+ sizeof(struct mkhi_fw_ver_block) * (__num))
+#define MKHI_RCV_TIMEOUT 500 /* receive timeout in msec */
+static int mei_fwver(struct mei_cl_device *cldev)
+{
+ char buf[MKHI_FWVER_BUF_LEN];
+ struct mkhi_msg *req;
+ struct mkhi_fw_ver *fwver;
+ int bytes_recv, ret, i;
+
+ memset(buf, 0, sizeof(buf));
+
+ req = (struct mkhi_msg *)buf;
+ req->hdr.group_id = MKHI_GEN_GROUP_ID;
+ req->hdr.command = MKHI_GEN_GET_FW_VERSION_CMD;
+
+ ret = __mei_cl_send(cldev->cl, buf, sizeof(struct mkhi_msg_hdr),
+ MEI_CL_IO_TX_BLOCKING);
+ if (ret < 0) {
+ dev_err(&cldev->dev, "Could not send ReqFWVersion cmd\n");
+ return ret;
+ }
+
+ ret = 0;
+ bytes_recv = __mei_cl_recv(cldev->cl, buf, sizeof(buf), 0,
+ MKHI_RCV_TIMEOUT);
+ if (bytes_recv < 0 || (size_t)bytes_recv < MKHI_FWVER_LEN(1)) {
+ /*
+ * Should be at least one version block,
+ * error out if nothing found
+ */
+ dev_err(&cldev->dev, "Could not read FW version\n");
+ return -EIO;
+ }
+
+ fwver = (struct mkhi_fw_ver *)req->data;
+ memset(cldev->bus->fw_ver, 0, sizeof(cldev->bus->fw_ver));
+ for (i = 0; i < MEI_MAX_FW_VER_BLOCKS; i++) {
+ if ((size_t)bytes_recv < MKHI_FWVER_LEN(i + 1))
+ break;
+ dev_dbg(&cldev->dev, "FW version%d %d:%d.%d.%d.%d\n",
+ i, fwver->ver[i].platform,
+ fwver->ver[i].major, fwver->ver[i].minor,
+ fwver->ver[i].hotfix, fwver->ver[i].buildno);
+
+ cldev->bus->fw_ver[i].platform = fwver->ver[i].platform;
+ cldev->bus->fw_ver[i].major = fwver->ver[i].major;
+ cldev->bus->fw_ver[i].minor = fwver->ver[i].minor;
+ cldev->bus->fw_ver[i].hotfix = fwver->ver[i].hotfix;
+ cldev->bus->fw_ver[i].buildno = fwver->ver[i].buildno;
+ }
+
+ return ret;
+}
+
+static void mei_mkhi_fix(struct mei_cl_device *cldev)
+{
+ int ret;
+
+ ret = mei_cldev_enable(cldev);
+ if (ret)
+ return;
+
+ ret = mei_fwver(cldev);
+ if (ret < 0)
+ dev_err(&cldev->dev, "FW version command failed %d\n", ret);
+
+ if (cldev->bus->hbm_f_os_supported) {
+ ret = mei_osver(cldev);
+ if (ret < 0)
+ dev_err(&cldev->dev, "OS version command failed %d\n",
+ ret);
+ }
+ mei_cldev_disable(cldev);
+}
+
+/**
+ * mei_wd - wd client on the bus, change protocol version
+ * as the API has changed.
+ *
+ * @cldev: me clients device
+ */
+#if IS_ENABLED(CONFIG_INTEL_MEI_ME)
+#include <linux/pci.h>
+#include "hw-me-regs.h"
+static void mei_wd(struct mei_cl_device *cldev)
+{
+ struct pci_dev *pdev = to_pci_dev(cldev->dev.parent);
+
+ dev_dbg(&cldev->dev, "running hook %s\n", __func__);
+ if (pdev->device == MEI_DEV_ID_WPT_LP ||
+ pdev->device == MEI_DEV_ID_SPT ||
+ pdev->device == MEI_DEV_ID_SPT_H)
+ cldev->me_cl->props.protocol_version = 0x2;
+
+ cldev->do_match = 1;
+}
+#else
+static inline void mei_wd(struct mei_cl_device *cldev) {}
+#endif /* CONFIG_INTEL_MEI_ME */
+
+struct mei_nfc_cmd {
+ u8 command;
+ u8 status;
+ u16 req_id;
+ u32 reserved;
+ u16 data_size;
+ u8 sub_command;
+ u8 data[];
+} __packed;
+
+struct mei_nfc_reply {
+ u8 command;
+ u8 status;
+ u16 req_id;
+ u32 reserved;
+ u16 data_size;
+ u8 sub_command;
+ u8 reply_status;
+ u8 data[];
+} __packed;
+
+struct mei_nfc_if_version {
+ u8 radio_version_sw[3];
+ u8 reserved[3];
+ u8 radio_version_hw[3];
+ u8 i2c_addr;
+ u8 fw_ivn;
+ u8 vendor_id;
+ u8 radio_type;
+} __packed;
+
+
+#define MEI_NFC_CMD_MAINTENANCE 0x00
+#define MEI_NFC_SUBCMD_IF_VERSION 0x01
+
+/* Vendors */
+#define MEI_NFC_VENDOR_INSIDE 0x00
+#define MEI_NFC_VENDOR_NXP 0x01
+
+/* Radio types */
+#define MEI_NFC_VENDOR_INSIDE_UREAD 0x00
+#define MEI_NFC_VENDOR_NXP_PN544 0x01
+
+/**
+ * mei_nfc_if_version - get NFC interface version
+ *
+ * @cl: host client (nfc info)
+ * @ver: NFC interface version to be filled in
+ *
+ * Return: 0 on success; < 0 otherwise
+ */
+static int mei_nfc_if_version(struct mei_cl *cl,
+ struct mei_nfc_if_version *ver)
+{
+ struct mei_device *bus;
+ struct mei_nfc_cmd cmd = {
+ .command = MEI_NFC_CMD_MAINTENANCE,
+ .data_size = 1,
+ .sub_command = MEI_NFC_SUBCMD_IF_VERSION,
+ };
+ struct mei_nfc_reply *reply = NULL;
+ size_t if_version_length;
+ int bytes_recv, ret;
+
+ bus = cl->dev;
+
+ WARN_ON(mutex_is_locked(&bus->device_lock));
+
+ ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(struct mei_nfc_cmd),
+ MEI_CL_IO_TX_BLOCKING);
+ if (ret < 0) {
+ dev_err(bus->dev, "Could not send IF version cmd\n");
+ return ret;
+ }
+
+ /* to be sure on the stack we alloc memory */
+ if_version_length = sizeof(struct mei_nfc_reply) +
+ sizeof(struct mei_nfc_if_version);
+
+ reply = kzalloc(if_version_length, GFP_KERNEL);
+ if (!reply)
+ return -ENOMEM;
+
+ ret = 0;
+ bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length, 0, 0);
+ if (bytes_recv < 0 || (size_t)bytes_recv < if_version_length) {
+ dev_err(bus->dev, "Could not read IF version\n");
+ ret = -EIO;
+ goto err;
+ }
+
+ memcpy(ver, reply->data, sizeof(struct mei_nfc_if_version));
+
+ dev_info(bus->dev, "NFC MEI VERSION: IVN 0x%x Vendor ID 0x%x Type 0x%x\n",
+ ver->fw_ivn, ver->vendor_id, ver->radio_type);
+
+err:
+ kfree(reply);
+ return ret;
+}
+
+/**
+ * mei_nfc_radio_name - derive nfc radio name from the interface version
+ *
+ * @ver: NFC radio version
+ *
+ * Return: radio name string
+ */
+static const char *mei_nfc_radio_name(struct mei_nfc_if_version *ver)
+{
+
+ if (ver->vendor_id == MEI_NFC_VENDOR_INSIDE) {
+ if (ver->radio_type == MEI_NFC_VENDOR_INSIDE_UREAD)
+ return "microread";
+ }
+
+ if (ver->vendor_id == MEI_NFC_VENDOR_NXP) {
+ if (ver->radio_type == MEI_NFC_VENDOR_NXP_PN544)
+ return "pn544";
+ }
+
+ return NULL;
+}
+
+/**
+ * mei_nfc - The nfc fixup function. The function retrieves nfc radio
+ * name and set is as device attribute so we can load
+ * the proper device driver for it
+ *
+ * @cldev: me client device (nfc)
+ */
+static void mei_nfc(struct mei_cl_device *cldev)
+{
+ struct mei_device *bus;
+ struct mei_cl *cl;
+ struct mei_me_client *me_cl = NULL;
+ struct mei_nfc_if_version ver;
+ const char *radio_name = NULL;
+ int ret;
+
+ bus = cldev->bus;
+
+ dev_dbg(&cldev->dev, "running hook %s\n", __func__);
+
+ mutex_lock(&bus->device_lock);
+ /* we need to connect to INFO GUID */
+ cl = mei_cl_alloc_linked(bus);
+ if (IS_ERR(cl)) {
+ ret = PTR_ERR(cl);
+ cl = NULL;
+ dev_err(bus->dev, "nfc hook alloc failed %d\n", ret);
+ goto out;
+ }
+
+ me_cl = mei_me_cl_by_uuid(bus, &mei_nfc_info_guid);
+ if (!me_cl) {
+ ret = -ENOTTY;
+ dev_err(bus->dev, "Cannot find nfc info %d\n", ret);
+ goto out;
+ }
+
+ ret = mei_cl_connect(cl, me_cl, NULL);
+ if (ret < 0) {
+ dev_err(&cldev->dev, "Can't connect to the NFC INFO ME ret = %d\n",
+ ret);
+ goto out;
+ }
+
+ mutex_unlock(&bus->device_lock);
+
+ ret = mei_nfc_if_version(cl, &ver);
+ if (ret)
+ goto disconnect;
+
+ radio_name = mei_nfc_radio_name(&ver);
+
+ if (!radio_name) {
+ ret = -ENOENT;
+ dev_err(&cldev->dev, "Can't get the NFC interface version ret = %d\n",
+ ret);
+ goto disconnect;
+ }
+
+ dev_dbg(bus->dev, "nfc radio %s\n", radio_name);
+ strlcpy(cldev->name, radio_name, sizeof(cldev->name));
+
+disconnect:
+ mutex_lock(&bus->device_lock);
+ if (mei_cl_disconnect(cl) < 0)
+ dev_err(bus->dev, "Can't disconnect the NFC INFO ME\n");
+
+ mei_cl_flush_queues(cl, NULL);
+
+out:
+ mei_cl_unlink(cl);
+ mutex_unlock(&bus->device_lock);
+ mei_me_cl_put(me_cl);
+ kfree(cl);
+
+ if (ret)
+ cldev->do_match = 0;
+
+ dev_dbg(bus->dev, "end of fixup match = %d\n", cldev->do_match);
+}
+
+#define MEI_FIXUP(_uuid, _hook) { _uuid, _hook }
+
+static struct mei_fixup {
+
+ const uuid_le uuid;
+ void (*hook)(struct mei_cl_device *cldev);
+} mei_fixups[] = {
+ MEI_FIXUP(MEI_UUID_ANY, number_of_connections),
+ MEI_FIXUP(MEI_UUID_NFC_INFO, blacklist),
+ MEI_FIXUP(MEI_UUID_NFC_HCI, mei_nfc),
+ MEI_FIXUP(MEI_UUID_WD, mei_wd),
+ MEI_FIXUP(MEI_UUID_MKHIF_FIX, mei_mkhi_fix),
+};
+
+/**
+ * mei_cldev_fixup - run fixup handlers
+ *
+ * @cldev: me client device
+ */
+void mei_cl_bus_dev_fixup(struct mei_cl_device *cldev)
+{
+ struct mei_fixup *f;
+ const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl);
+ size_t i;
+
+ for (i = 0; i < ARRAY_SIZE(mei_fixups); i++) {
+
+ f = &mei_fixups[i];
+ if (uuid_le_cmp(f->uuid, MEI_UUID_ANY) == 0 ||
+ uuid_le_cmp(f->uuid, *uuid) == 0)
+ f->hook(cldev);
+ }
+}
+
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
new file mode 100644
index 0000000..fc3872f
--- /dev/null
+++ b/drivers/misc/mei/bus.c
@@ -0,0 +1,1154 @@
+/*
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2012-2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/mei_cl_bus.h>
+
+#include "mei_dev.h"
+#include "client.h"
+
+#define to_mei_cl_driver(d) container_of(d, struct mei_cl_driver, driver)
+#define to_mei_cl_device(d) container_of(d, struct mei_cl_device, dev)
+
+/**
+ * __mei_cl_send - internal client send (write)
+ *
+ * @cl: host client
+ * @buf: buffer to send
+ * @length: buffer length
+ * @mode: sending mode
+ *
+ * Return: written size bytes or < 0 on error
+ */
+ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length,
+ unsigned int mode)
+{
+ struct mei_device *bus;
+ struct mei_cl_cb *cb;
+ ssize_t rets;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ bus = cl->dev;
+
+ mutex_lock(&bus->device_lock);
+ if (bus->dev_state != MEI_DEV_ENABLED) {
+ rets = -ENODEV;
+ goto out;
+ }
+
+ if (!mei_cl_is_connected(cl)) {
+ rets = -ENODEV;
+ goto out;
+ }
+
+ /* Check if we have an ME client device */
+ if (!mei_me_cl_is_active(cl->me_cl)) {
+ rets = -ENOTTY;
+ goto out;
+ }
+
+ if (length > mei_cl_mtu(cl)) {
+ rets = -EFBIG;
+ goto out;
+ }
+
+ while (cl->tx_cb_queued >= bus->tx_queue_limit) {
+ mutex_unlock(&bus->device_lock);
+ rets = wait_event_interruptible(cl->tx_wait,
+ cl->writing_state == MEI_WRITE_COMPLETE ||
+ (!mei_cl_is_connected(cl)));
+ mutex_lock(&bus->device_lock);
+ if (rets) {
+ if (signal_pending(current))
+ rets = -EINTR;
+ goto out;
+ }
+ if (!mei_cl_is_connected(cl)) {
+ rets = -ENODEV;
+ goto out;
+ }
+ }
+
+ cb = mei_cl_alloc_cb(cl, length, MEI_FOP_WRITE, NULL);
+ if (!cb) {
+ rets = -ENOMEM;
+ goto out;
+ }
+
+ cb->internal = !!(mode & MEI_CL_IO_TX_INTERNAL);
+ cb->blocking = !!(mode & MEI_CL_IO_TX_BLOCKING);
+ memcpy(cb->buf.data, buf, length);
+
+ rets = mei_cl_write(cl, cb);
+
+out:
+ mutex_unlock(&bus->device_lock);
+
+ return rets;
+}
+
+/**
+ * __mei_cl_recv - internal client receive (read)
+ *
+ * @cl: host client
+ * @buf: buffer to receive
+ * @length: buffer length
+ * @mode: io mode
+ * @timeout: recv timeout, 0 for infinite timeout
+ *
+ * Return: read size in bytes of < 0 on error
+ */
+ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length,
+ unsigned int mode, unsigned long timeout)
+{
+ struct mei_device *bus;
+ struct mei_cl_cb *cb;
+ size_t r_length;
+ ssize_t rets;
+ bool nonblock = !!(mode & MEI_CL_IO_RX_NONBLOCK);
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ bus = cl->dev;
+
+ mutex_lock(&bus->device_lock);
+ if (bus->dev_state != MEI_DEV_ENABLED) {
+ rets = -ENODEV;
+ goto out;
+ }
+
+ cb = mei_cl_read_cb(cl, NULL);
+ if (cb)
+ goto copy;
+
+ rets = mei_cl_read_start(cl, length, NULL);
+ if (rets && rets != -EBUSY)
+ goto out;
+
+ if (nonblock) {
+ rets = -EAGAIN;
+ goto out;
+ }
+
+ /* wait on event only if there is no other waiter */
+ /* synchronized under device mutex */
+ if (!waitqueue_active(&cl->rx_wait)) {
+
+ mutex_unlock(&bus->device_lock);
+
+ if (timeout) {
+ rets = wait_event_interruptible_timeout
+ (cl->rx_wait,
+ (!list_empty(&cl->rd_completed)) ||
+ (!mei_cl_is_connected(cl)),
+ msecs_to_jiffies(timeout));
+ if (rets == 0)
+ return -ETIME;
+ if (rets < 0) {
+ if (signal_pending(current))
+ return -EINTR;
+ return -ERESTARTSYS;
+ }
+ } else {
+ if (wait_event_interruptible
+ (cl->rx_wait,
+ (!list_empty(&cl->rd_completed)) ||
+ (!mei_cl_is_connected(cl)))) {
+ if (signal_pending(current))
+ return -EINTR;
+ return -ERESTARTSYS;
+ }
+ }
+
+ mutex_lock(&bus->device_lock);
+
+ if (!mei_cl_is_connected(cl)) {
+ rets = -ENODEV;
+ goto out;
+ }
+ }
+
+ cb = mei_cl_read_cb(cl, NULL);
+ if (!cb) {
+ rets = 0;
+ goto out;
+ }
+
+copy:
+ if (cb->status) {
+ rets = cb->status;
+ goto free;
+ }
+
+ r_length = min_t(size_t, length, cb->buf_idx);
+ memcpy(buf, cb->buf.data, r_length);
+ rets = r_length;
+
+free:
+ mei_io_cb_free(cb);
+out:
+ mutex_unlock(&bus->device_lock);
+
+ return rets;
+}
+
+/**
+ * mei_cldev_send - me device send (write)
+ *
+ * @cldev: me client device
+ * @buf: buffer to send
+ * @length: buffer length
+ *
+ * Return: written size in bytes or < 0 on error
+ */
+ssize_t mei_cldev_send(struct mei_cl_device *cldev, u8 *buf, size_t length)
+{
+ struct mei_cl *cl = cldev->cl;
+
+ return __mei_cl_send(cl, buf, length, MEI_CL_IO_TX_BLOCKING);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_send);
+
+/**
+ * mei_cldev_recv_nonblock - non block client receive (read)
+ *
+ * @cldev: me client device
+ * @buf: buffer to receive
+ * @length: buffer length
+ *
+ * Return: read size in bytes of < 0 on error
+ * -EAGAIN if function will block.
+ */
+ssize_t mei_cldev_recv_nonblock(struct mei_cl_device *cldev, u8 *buf,
+ size_t length)
+{
+ struct mei_cl *cl = cldev->cl;
+
+ return __mei_cl_recv(cl, buf, length, MEI_CL_IO_RX_NONBLOCK, 0);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_recv_nonblock);
+
+/**
+ * mei_cldev_recv - client receive (read)
+ *
+ * @cldev: me client device
+ * @buf: buffer to receive
+ * @length: buffer length
+ *
+ * Return: read size in bytes of < 0 on error
+ */
+ssize_t mei_cldev_recv(struct mei_cl_device *cldev, u8 *buf, size_t length)
+{
+ struct mei_cl *cl = cldev->cl;
+
+ return __mei_cl_recv(cl, buf, length, 0, 0);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_recv);
+
+/**
+ * mei_cl_bus_rx_work - dispatch rx event for a bus device
+ *
+ * @work: work
+ */
+static void mei_cl_bus_rx_work(struct work_struct *work)
+{
+ struct mei_cl_device *cldev;
+ struct mei_device *bus;
+
+ cldev = container_of(work, struct mei_cl_device, rx_work);
+
+ bus = cldev->bus;
+
+ if (cldev->rx_cb)
+ cldev->rx_cb(cldev);
+
+ mutex_lock(&bus->device_lock);
+ mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL);
+ mutex_unlock(&bus->device_lock);
+}
+
+/**
+ * mei_cl_bus_notif_work - dispatch FW notif event for a bus device
+ *
+ * @work: work
+ */
+static void mei_cl_bus_notif_work(struct work_struct *work)
+{
+ struct mei_cl_device *cldev;
+
+ cldev = container_of(work, struct mei_cl_device, notif_work);
+
+ if (cldev->notif_cb)
+ cldev->notif_cb(cldev);
+}
+
+/**
+ * mei_cl_bus_notify_event - schedule notify cb on bus client
+ *
+ * @cl: host client
+ *
+ * Return: true if event was scheduled
+ * false if the client is not waiting for event
+ */
+bool mei_cl_bus_notify_event(struct mei_cl *cl)
+{
+ struct mei_cl_device *cldev = cl->cldev;
+
+ if (!cldev || !cldev->notif_cb)
+ return false;
+
+ if (!cl->notify_ev)
+ return false;
+
+ schedule_work(&cldev->notif_work);
+
+ cl->notify_ev = false;
+
+ return true;
+}
+
+/**
+ * mei_cl_bus_rx_event - schedule rx event
+ *
+ * @cl: host client
+ *
+ * Return: true if event was scheduled
+ * false if the client is not waiting for event
+ */
+bool mei_cl_bus_rx_event(struct mei_cl *cl)
+{
+ struct mei_cl_device *cldev = cl->cldev;
+
+ if (!cldev || !cldev->rx_cb)
+ return false;
+
+ schedule_work(&cldev->rx_work);
+
+ return true;
+}
+
+/**
+ * mei_cldev_register_rx_cb - register Rx event callback
+ *
+ * @cldev: me client devices
+ * @rx_cb: callback function
+ *
+ * Return: 0 on success
+ * -EALREADY if an callback is already registered
+ * <0 on other errors
+ */
+int mei_cldev_register_rx_cb(struct mei_cl_device *cldev, mei_cldev_cb_t rx_cb)
+{
+ struct mei_device *bus = cldev->bus;
+ int ret;
+
+ if (!rx_cb)
+ return -EINVAL;
+ if (cldev->rx_cb)
+ return -EALREADY;
+
+ cldev->rx_cb = rx_cb;
+ INIT_WORK(&cldev->rx_work, mei_cl_bus_rx_work);
+
+ mutex_lock(&bus->device_lock);
+ ret = mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL);
+ mutex_unlock(&bus->device_lock);
+ if (ret && ret != -EBUSY)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mei_cldev_register_rx_cb);
+
+/**
+ * mei_cldev_register_notif_cb - register FW notification event callback
+ *
+ * @cldev: me client devices
+ * @notif_cb: callback function
+ *
+ * Return: 0 on success
+ * -EALREADY if an callback is already registered
+ * <0 on other errors
+ */
+int mei_cldev_register_notif_cb(struct mei_cl_device *cldev,
+ mei_cldev_cb_t notif_cb)
+{
+ struct mei_device *bus = cldev->bus;
+ int ret;
+
+ if (!notif_cb)
+ return -EINVAL;
+
+ if (cldev->notif_cb)
+ return -EALREADY;
+
+ cldev->notif_cb = notif_cb;
+ INIT_WORK(&cldev->notif_work, mei_cl_bus_notif_work);
+
+ mutex_lock(&bus->device_lock);
+ ret = mei_cl_notify_request(cldev->cl, NULL, 1);
+ mutex_unlock(&bus->device_lock);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mei_cldev_register_notif_cb);
+
+/**
+ * mei_cldev_get_drvdata - driver data getter
+ *
+ * @cldev: mei client device
+ *
+ * Return: driver private data
+ */
+void *mei_cldev_get_drvdata(const struct mei_cl_device *cldev)
+{
+ return dev_get_drvdata(&cldev->dev);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_get_drvdata);
+
+/**
+ * mei_cldev_set_drvdata - driver data setter
+ *
+ * @cldev: mei client device
+ * @data: data to store
+ */
+void mei_cldev_set_drvdata(struct mei_cl_device *cldev, void *data)
+{
+ dev_set_drvdata(&cldev->dev, data);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_set_drvdata);
+
+/**
+ * mei_cldev_uuid - return uuid of the underlying me client
+ *
+ * @cldev: mei client device
+ *
+ * Return: me client uuid
+ */
+const uuid_le *mei_cldev_uuid(const struct mei_cl_device *cldev)
+{
+ return mei_me_cl_uuid(cldev->me_cl);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_uuid);
+
+/**
+ * mei_cldev_ver - return protocol version of the underlying me client
+ *
+ * @cldev: mei client device
+ *
+ * Return: me client protocol version
+ */
+u8 mei_cldev_ver(const struct mei_cl_device *cldev)
+{
+ return mei_me_cl_ver(cldev->me_cl);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_ver);
+
+/**
+ * mei_cldev_enabled - check whether the device is enabled
+ *
+ * @cldev: mei client device
+ *
+ * Return: true if me client is initialized and connected
+ */
+bool mei_cldev_enabled(struct mei_cl_device *cldev)
+{
+ return mei_cl_is_connected(cldev->cl);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_enabled);
+
+/**
+ * mei_cl_bus_module_get - acquire module of the underlying
+ * hw driver.
+ *
+ * @cldev: mei client device
+ *
+ * Return: true on success; false if the module was removed.
+ */
+static bool mei_cl_bus_module_get(struct mei_cl_device *cldev)
+{
+ return try_module_get(cldev->bus->dev->driver->owner);
+}
+
+/**
+ * mei_cl_bus_module_put - release the underlying hw module.
+ *
+ * @cldev: mei client device
+ */
+static void mei_cl_bus_module_put(struct mei_cl_device *cldev)
+{
+ module_put(cldev->bus->dev->driver->owner);
+}
+
+/**
+ * mei_cldev_enable - enable me client device
+ * create connection with me client
+ *
+ * @cldev: me client device
+ *
+ * Return: 0 on success and < 0 on error
+ */
+int mei_cldev_enable(struct mei_cl_device *cldev)
+{
+ struct mei_device *bus = cldev->bus;
+ struct mei_cl *cl;
+ int ret;
+
+ cl = cldev->cl;
+
+ mutex_lock(&bus->device_lock);
+ if (cl->state == MEI_FILE_UNINITIALIZED) {
+ ret = mei_cl_link(cl);
+ if (ret)
+ goto out;
+ /* update pointers */
+ cl->cldev = cldev;
+ }
+
+ if (mei_cl_is_connected(cl)) {
+ ret = 0;
+ goto out;
+ }
+
+ if (!mei_me_cl_is_active(cldev->me_cl)) {
+ dev_err(&cldev->dev, "me client is not active\n");
+ ret = -ENOTTY;
+ goto out;
+ }
+
+ if (!mei_cl_bus_module_get(cldev)) {
+ dev_err(&cldev->dev, "get hw module failed");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = mei_cl_connect(cl, cldev->me_cl, NULL);
+ if (ret < 0) {
+ dev_err(&cldev->dev, "cannot connect\n");
+ mei_cl_bus_module_put(cldev);
+ }
+
+out:
+ mutex_unlock(&bus->device_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mei_cldev_enable);
+
+/**
+ * mei_cldev_unregister_callbacks - internal wrapper for unregistering
+ * callbacks.
+ *
+ * @cldev: client device
+ */
+static void mei_cldev_unregister_callbacks(struct mei_cl_device *cldev)
+{
+ if (cldev->rx_cb) {
+ cancel_work_sync(&cldev->rx_work);
+ cldev->rx_cb = NULL;
+ }
+
+ if (cldev->notif_cb) {
+ cancel_work_sync(&cldev->notif_work);
+ cldev->notif_cb = NULL;
+ }
+}
+
+/**
+ * mei_cldev_disable - disable me client device
+ * disconnect form the me client
+ *
+ * @cldev: me client device
+ *
+ * Return: 0 on success and < 0 on error
+ */
+int mei_cldev_disable(struct mei_cl_device *cldev)
+{
+ struct mei_device *bus;
+ struct mei_cl *cl;
+ int err;
+
+ if (!cldev)
+ return -ENODEV;
+
+ cl = cldev->cl;
+
+ bus = cldev->bus;
+
+ mei_cldev_unregister_callbacks(cldev);
+
+ mutex_lock(&bus->device_lock);
+
+ if (!mei_cl_is_connected(cl)) {
+ dev_dbg(bus->dev, "Already disconnected\n");
+ err = 0;
+ goto out;
+ }
+
+ err = mei_cl_disconnect(cl);
+ if (err < 0)
+ dev_err(bus->dev, "Could not disconnect from the ME client\n");
+
+ mei_cl_bus_module_put(cldev);
+out:
+ /* Flush queues and remove any pending read */
+ mei_cl_flush_queues(cl, NULL);
+ mei_cl_unlink(cl);
+
+ mutex_unlock(&bus->device_lock);
+ return err;
+}
+EXPORT_SYMBOL_GPL(mei_cldev_disable);
+
+/**
+ * mei_cl_device_find - find matching entry in the driver id table
+ *
+ * @cldev: me client device
+ * @cldrv: me client driver
+ *
+ * Return: id on success; NULL if no id is matching
+ */
+static const
+struct mei_cl_device_id *mei_cl_device_find(struct mei_cl_device *cldev,
+ struct mei_cl_driver *cldrv)
+{
+ const struct mei_cl_device_id *id;
+ const uuid_le *uuid;
+ u8 version;
+ bool match;
+
+ uuid = mei_me_cl_uuid(cldev->me_cl);
+ version = mei_me_cl_ver(cldev->me_cl);
+
+ id = cldrv->id_table;
+ while (uuid_le_cmp(NULL_UUID_LE, id->uuid)) {
+ if (!uuid_le_cmp(*uuid, id->uuid)) {
+ match = true;
+
+ if (cldev->name[0])
+ if (strncmp(cldev->name, id->name,
+ sizeof(id->name)))
+ match = false;
+
+ if (id->version != MEI_CL_VERSION_ANY)
+ if (id->version != version)
+ match = false;
+ if (match)
+ return id;
+ }
+
+ id++;
+ }
+
+ return NULL;
+}
+
+/**
+ * mei_cl_device_match - device match function
+ *
+ * @dev: device
+ * @drv: driver
+ *
+ * Return: 1 if matching device was found 0 otherwise
+ */
+static int mei_cl_device_match(struct device *dev, struct device_driver *drv)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+ struct mei_cl_driver *cldrv = to_mei_cl_driver(drv);
+ const struct mei_cl_device_id *found_id;
+
+ if (!cldev)
+ return 0;
+
+ if (!cldev->do_match)
+ return 0;
+
+ if (!cldrv || !cldrv->id_table)
+ return 0;
+
+ found_id = mei_cl_device_find(cldev, cldrv);
+ if (found_id)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * mei_cl_device_probe - bus probe function
+ *
+ * @dev: device
+ *
+ * Return: 0 on success; < 0 otherwise
+ */
+static int mei_cl_device_probe(struct device *dev)
+{
+ struct mei_cl_device *cldev;
+ struct mei_cl_driver *cldrv;
+ const struct mei_cl_device_id *id;
+ int ret;
+
+ cldev = to_mei_cl_device(dev);
+ cldrv = to_mei_cl_driver(dev->driver);
+
+ if (!cldev)
+ return 0;
+
+ if (!cldrv || !cldrv->probe)
+ return -ENODEV;
+
+ id = mei_cl_device_find(cldev, cldrv);
+ if (!id)
+ return -ENODEV;
+
+ ret = cldrv->probe(cldev, id);
+ if (ret)
+ return ret;
+
+ __module_get(THIS_MODULE);
+ return 0;
+}
+
+/**
+ * mei_cl_device_remove - remove device from the bus
+ *
+ * @dev: device
+ *
+ * Return: 0 on success; < 0 otherwise
+ */
+static int mei_cl_device_remove(struct device *dev)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+ struct mei_cl_driver *cldrv;
+ int ret = 0;
+
+ if (!cldev || !dev->driver)
+ return 0;
+
+ cldrv = to_mei_cl_driver(dev->driver);
+ if (cldrv->remove)
+ ret = cldrv->remove(cldev);
+
+ mei_cldev_unregister_callbacks(cldev);
+
+ module_put(THIS_MODULE);
+ dev->driver = NULL;
+ return ret;
+
+}
+
+static ssize_t name_show(struct device *dev, struct device_attribute *a,
+ char *buf)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%s", cldev->name);
+}
+static DEVICE_ATTR_RO(name);
+
+static ssize_t uuid_show(struct device *dev, struct device_attribute *a,
+ char *buf)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+ const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl);
+
+ return scnprintf(buf, PAGE_SIZE, "%pUl", uuid);
+}
+static DEVICE_ATTR_RO(uuid);
+
+static ssize_t version_show(struct device *dev, struct device_attribute *a,
+ char *buf)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+ u8 version = mei_me_cl_ver(cldev->me_cl);
+
+ return scnprintf(buf, PAGE_SIZE, "%02X", version);
+}
+static DEVICE_ATTR_RO(version);
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *a,
+ char *buf)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+ const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl);
+ u8 version = mei_me_cl_ver(cldev->me_cl);
+
+ return scnprintf(buf, PAGE_SIZE, "mei:%s:%pUl:%02X:",
+ cldev->name, uuid, version);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *mei_cldev_attrs[] = {
+ &dev_attr_name.attr,
+ &dev_attr_uuid.attr,
+ &dev_attr_version.attr,
+ &dev_attr_modalias.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(mei_cldev);
+
+/**
+ * mei_cl_device_uevent - me client bus uevent handler
+ *
+ * @dev: device
+ * @env: uevent kobject
+ *
+ * Return: 0 on success -ENOMEM on when add_uevent_var fails
+ */
+static int mei_cl_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+ const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl);
+ u8 version = mei_me_cl_ver(cldev->me_cl);
+
+ if (add_uevent_var(env, "MEI_CL_VERSION=%d", version))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "MEI_CL_UUID=%pUl", uuid))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "MEI_CL_NAME=%s", cldev->name))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "MODALIAS=mei:%s:%pUl:%02X:",
+ cldev->name, uuid, version))
+ return -ENOMEM;
+
+ return 0;
+}
+
+static struct bus_type mei_cl_bus_type = {
+ .name = "mei",
+ .dev_groups = mei_cldev_groups,
+ .match = mei_cl_device_match,
+ .probe = mei_cl_device_probe,
+ .remove = mei_cl_device_remove,
+ .uevent = mei_cl_device_uevent,
+};
+
+static struct mei_device *mei_dev_bus_get(struct mei_device *bus)
+{
+ if (bus)
+ get_device(bus->dev);
+
+ return bus;
+}
+
+static void mei_dev_bus_put(struct mei_device *bus)
+{
+ if (bus)
+ put_device(bus->dev);
+}
+
+static void mei_cl_bus_dev_release(struct device *dev)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+
+ if (!cldev)
+ return;
+
+ mei_me_cl_put(cldev->me_cl);
+ mei_dev_bus_put(cldev->bus);
+ mei_cl_unlink(cldev->cl);
+ kfree(cldev->cl);
+ kfree(cldev);
+}
+
+static const struct device_type mei_cl_device_type = {
+ .release = mei_cl_bus_dev_release,
+};
+
+/**
+ * mei_cl_bus_set_name - set device name for me client device
+ *
+ * @cldev: me client device
+ */
+static inline void mei_cl_bus_set_name(struct mei_cl_device *cldev)
+{
+ dev_set_name(&cldev->dev, "mei:%s:%pUl:%02X",
+ cldev->name,
+ mei_me_cl_uuid(cldev->me_cl),
+ mei_me_cl_ver(cldev->me_cl));
+}
+
+/**
+ * mei_cl_bus_dev_alloc - initialize and allocate mei client device
+ *
+ * @bus: mei device
+ * @me_cl: me client
+ *
+ * Return: allocated device structur or NULL on allocation failure
+ */
+static struct mei_cl_device *mei_cl_bus_dev_alloc(struct mei_device *bus,
+ struct mei_me_client *me_cl)
+{
+ struct mei_cl_device *cldev;
+ struct mei_cl *cl;
+
+ cldev = kzalloc(sizeof(struct mei_cl_device), GFP_KERNEL);
+ if (!cldev)
+ return NULL;
+
+ cl = mei_cl_allocate(bus);
+ if (!cl) {
+ kfree(cldev);
+ return NULL;
+ }
+
+ device_initialize(&cldev->dev);
+ cldev->dev.parent = bus->dev;
+ cldev->dev.bus = &mei_cl_bus_type;
+ cldev->dev.type = &mei_cl_device_type;
+ cldev->bus = mei_dev_bus_get(bus);
+ cldev->me_cl = mei_me_cl_get(me_cl);
+ cldev->cl = cl;
+ mei_cl_bus_set_name(cldev);
+ cldev->is_added = 0;
+ INIT_LIST_HEAD(&cldev->bus_list);
+
+ return cldev;
+}
+
+/**
+ * mei_cl_dev_setup - setup me client device
+ * run fix up routines and set the device name
+ *
+ * @bus: mei device
+ * @cldev: me client device
+ *
+ * Return: true if the device is eligible for enumeration
+ */
+static bool mei_cl_bus_dev_setup(struct mei_device *bus,
+ struct mei_cl_device *cldev)
+{
+ cldev->do_match = 1;
+ mei_cl_bus_dev_fixup(cldev);
+
+ /* the device name can change during fix up */
+ if (cldev->do_match)
+ mei_cl_bus_set_name(cldev);
+
+ return cldev->do_match == 1;
+}
+
+/**
+ * mei_cl_bus_dev_add - add me client devices
+ *
+ * @cldev: me client device
+ *
+ * Return: 0 on success; < 0 on failre
+ */
+static int mei_cl_bus_dev_add(struct mei_cl_device *cldev)
+{
+ int ret;
+
+ dev_dbg(cldev->bus->dev, "adding %pUL:%02X\n",
+ mei_me_cl_uuid(cldev->me_cl),
+ mei_me_cl_ver(cldev->me_cl));
+ ret = device_add(&cldev->dev);
+ if (!ret)
+ cldev->is_added = 1;
+
+ return ret;
+}
+
+/**
+ * mei_cl_bus_dev_stop - stop the driver
+ *
+ * @cldev: me client device
+ */
+static void mei_cl_bus_dev_stop(struct mei_cl_device *cldev)
+{
+ if (cldev->is_added)
+ device_release_driver(&cldev->dev);
+}
+
+/**
+ * mei_cl_bus_dev_destroy - destroy me client devices object
+ *
+ * @cldev: me client device
+ *
+ * Locking: called under "dev->cl_bus_lock" lock
+ */
+static void mei_cl_bus_dev_destroy(struct mei_cl_device *cldev)
+{
+
+ WARN_ON(!mutex_is_locked(&cldev->bus->cl_bus_lock));
+
+ if (!cldev->is_added)
+ return;
+
+ device_del(&cldev->dev);
+
+ list_del_init(&cldev->bus_list);
+
+ cldev->is_added = 0;
+ put_device(&cldev->dev);
+}
+
+/**
+ * mei_cl_bus_remove_device - remove a devices form the bus
+ *
+ * @cldev: me client device
+ */
+static void mei_cl_bus_remove_device(struct mei_cl_device *cldev)
+{
+ mei_cl_bus_dev_stop(cldev);
+ mei_cl_bus_dev_destroy(cldev);
+}
+
+/**
+ * mei_cl_bus_remove_devices - remove all devices form the bus
+ *
+ * @bus: mei device
+ */
+void mei_cl_bus_remove_devices(struct mei_device *bus)
+{
+ struct mei_cl_device *cldev, *next;
+
+ mutex_lock(&bus->cl_bus_lock);
+ list_for_each_entry_safe(cldev, next, &bus->device_list, bus_list)
+ mei_cl_bus_remove_device(cldev);
+ mutex_unlock(&bus->cl_bus_lock);
+}
+
+
+/**
+ * mei_cl_bus_dev_init - allocate and initializes an mei client devices
+ * based on me client
+ *
+ * @bus: mei device
+ * @me_cl: me client
+ *
+ * Locking: called under "dev->cl_bus_lock" lock
+ */
+static void mei_cl_bus_dev_init(struct mei_device *bus,
+ struct mei_me_client *me_cl)
+{
+ struct mei_cl_device *cldev;
+
+ WARN_ON(!mutex_is_locked(&bus->cl_bus_lock));
+
+ dev_dbg(bus->dev, "initializing %pUl", mei_me_cl_uuid(me_cl));
+
+ if (me_cl->bus_added)
+ return;
+
+ cldev = mei_cl_bus_dev_alloc(bus, me_cl);
+ if (!cldev)
+ return;
+
+ me_cl->bus_added = true;
+ list_add_tail(&cldev->bus_list, &bus->device_list);
+
+}
+
+/**
+ * mei_cl_bus_rescan - scan me clients list and add create
+ * devices for eligible clients
+ *
+ * @bus: mei device
+ */
+static void mei_cl_bus_rescan(struct mei_device *bus)
+{
+ struct mei_cl_device *cldev, *n;
+ struct mei_me_client *me_cl;
+
+ mutex_lock(&bus->cl_bus_lock);
+
+ down_read(&bus->me_clients_rwsem);
+ list_for_each_entry(me_cl, &bus->me_clients, list)
+ mei_cl_bus_dev_init(bus, me_cl);
+ up_read(&bus->me_clients_rwsem);
+
+ list_for_each_entry_safe(cldev, n, &bus->device_list, bus_list) {
+
+ if (!mei_me_cl_is_active(cldev->me_cl)) {
+ mei_cl_bus_remove_device(cldev);
+ continue;
+ }
+
+ if (cldev->is_added)
+ continue;
+
+ if (mei_cl_bus_dev_setup(bus, cldev))
+ mei_cl_bus_dev_add(cldev);
+ else {
+ list_del_init(&cldev->bus_list);
+ put_device(&cldev->dev);
+ }
+ }
+ mutex_unlock(&bus->cl_bus_lock);
+
+ dev_dbg(bus->dev, "rescan end");
+}
+
+void mei_cl_bus_rescan_work(struct work_struct *work)
+{
+ struct mei_device *bus =
+ container_of(work, struct mei_device, bus_rescan_work);
+
+ mei_cl_bus_rescan(bus);
+}
+
+int __mei_cldev_driver_register(struct mei_cl_driver *cldrv,
+ struct module *owner)
+{
+ int err;
+
+ cldrv->driver.name = cldrv->name;
+ cldrv->driver.owner = owner;
+ cldrv->driver.bus = &mei_cl_bus_type;
+
+ err = driver_register(&cldrv->driver);
+ if (err)
+ return err;
+
+ pr_debug("mei: driver [%s] registered\n", cldrv->driver.name);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__mei_cldev_driver_register);
+
+void mei_cldev_driver_unregister(struct mei_cl_driver *cldrv)
+{
+ driver_unregister(&cldrv->driver);
+
+ pr_debug("mei: driver [%s] unregistered\n", cldrv->driver.name);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_driver_unregister);
+
+
+int __init mei_cl_bus_init(void)
+{
+ return bus_register(&mei_cl_bus_type);
+}
+
+void __exit mei_cl_bus_exit(void)
+{
+ bus_unregister(&mei_cl_bus_type);
+}
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
new file mode 100644
index 0000000..ebdcf0b
--- /dev/null
+++ b/drivers/misc/mei/client.c
@@ -0,0 +1,1842 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/sched/signal.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "hbm.h"
+#include "client.h"
+
+/**
+ * mei_me_cl_init - initialize me client
+ *
+ * @me_cl: me client
+ */
+void mei_me_cl_init(struct mei_me_client *me_cl)
+{
+ INIT_LIST_HEAD(&me_cl->list);
+ kref_init(&me_cl->refcnt);
+}
+
+/**
+ * mei_me_cl_get - increases me client refcount
+ *
+ * @me_cl: me client
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * Return: me client or NULL
+ */
+struct mei_me_client *mei_me_cl_get(struct mei_me_client *me_cl)
+{
+ if (me_cl && kref_get_unless_zero(&me_cl->refcnt))
+ return me_cl;
+
+ return NULL;
+}
+
+/**
+ * mei_me_cl_release - free me client
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * @ref: me_client refcount
+ */
+static void mei_me_cl_release(struct kref *ref)
+{
+ struct mei_me_client *me_cl =
+ container_of(ref, struct mei_me_client, refcnt);
+
+ kfree(me_cl);
+}
+
+/**
+ * mei_me_cl_put - decrease me client refcount and free client if necessary
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * @me_cl: me client
+ */
+void mei_me_cl_put(struct mei_me_client *me_cl)
+{
+ if (me_cl)
+ kref_put(&me_cl->refcnt, mei_me_cl_release);
+}
+
+/**
+ * __mei_me_cl_del - delete me client from the list and decrease
+ * reference counter
+ *
+ * @dev: mei device
+ * @me_cl: me client
+ *
+ * Locking: dev->me_clients_rwsem
+ */
+static void __mei_me_cl_del(struct mei_device *dev, struct mei_me_client *me_cl)
+{
+ if (!me_cl)
+ return;
+
+ list_del_init(&me_cl->list);
+ mei_me_cl_put(me_cl);
+}
+
+/**
+ * mei_me_cl_del - delete me client from the list and decrease
+ * reference counter
+ *
+ * @dev: mei device
+ * @me_cl: me client
+ */
+void mei_me_cl_del(struct mei_device *dev, struct mei_me_client *me_cl)
+{
+ down_write(&dev->me_clients_rwsem);
+ __mei_me_cl_del(dev, me_cl);
+ up_write(&dev->me_clients_rwsem);
+}
+
+/**
+ * mei_me_cl_add - add me client to the list
+ *
+ * @dev: mei device
+ * @me_cl: me client
+ */
+void mei_me_cl_add(struct mei_device *dev, struct mei_me_client *me_cl)
+{
+ down_write(&dev->me_clients_rwsem);
+ list_add(&me_cl->list, &dev->me_clients);
+ up_write(&dev->me_clients_rwsem);
+}
+
+/**
+ * __mei_me_cl_by_uuid - locate me client by uuid
+ * increases ref count
+ *
+ * @dev: mei device
+ * @uuid: me client uuid
+ *
+ * Return: me client or NULL if not found
+ *
+ * Locking: dev->me_clients_rwsem
+ */
+static struct mei_me_client *__mei_me_cl_by_uuid(struct mei_device *dev,
+ const uuid_le *uuid)
+{
+ struct mei_me_client *me_cl;
+ const uuid_le *pn;
+
+ WARN_ON(!rwsem_is_locked(&dev->me_clients_rwsem));
+
+ list_for_each_entry(me_cl, &dev->me_clients, list) {
+ pn = &me_cl->props.protocol_name;
+ if (uuid_le_cmp(*uuid, *pn) == 0)
+ return mei_me_cl_get(me_cl);
+ }
+
+ return NULL;
+}
+
+/**
+ * mei_me_cl_by_uuid - locate me client by uuid
+ * increases ref count
+ *
+ * @dev: mei device
+ * @uuid: me client uuid
+ *
+ * Return: me client or NULL if not found
+ *
+ * Locking: dev->me_clients_rwsem
+ */
+struct mei_me_client *mei_me_cl_by_uuid(struct mei_device *dev,
+ const uuid_le *uuid)
+{
+ struct mei_me_client *me_cl;
+
+ down_read(&dev->me_clients_rwsem);
+ me_cl = __mei_me_cl_by_uuid(dev, uuid);
+ up_read(&dev->me_clients_rwsem);
+
+ return me_cl;
+}
+
+/**
+ * mei_me_cl_by_id - locate me client by client id
+ * increases ref count
+ *
+ * @dev: the device structure
+ * @client_id: me client id
+ *
+ * Return: me client or NULL if not found
+ *
+ * Locking: dev->me_clients_rwsem
+ */
+struct mei_me_client *mei_me_cl_by_id(struct mei_device *dev, u8 client_id)
+{
+
+ struct mei_me_client *__me_cl, *me_cl = NULL;
+
+ down_read(&dev->me_clients_rwsem);
+ list_for_each_entry(__me_cl, &dev->me_clients, list) {
+ if (__me_cl->client_id == client_id) {
+ me_cl = mei_me_cl_get(__me_cl);
+ break;
+ }
+ }
+ up_read(&dev->me_clients_rwsem);
+
+ return me_cl;
+}
+
+/**
+ * __mei_me_cl_by_uuid_id - locate me client by client id and uuid
+ * increases ref count
+ *
+ * @dev: the device structure
+ * @uuid: me client uuid
+ * @client_id: me client id
+ *
+ * Return: me client or null if not found
+ *
+ * Locking: dev->me_clients_rwsem
+ */
+static struct mei_me_client *__mei_me_cl_by_uuid_id(struct mei_device *dev,
+ const uuid_le *uuid, u8 client_id)
+{
+ struct mei_me_client *me_cl;
+ const uuid_le *pn;
+
+ WARN_ON(!rwsem_is_locked(&dev->me_clients_rwsem));
+
+ list_for_each_entry(me_cl, &dev->me_clients, list) {
+ pn = &me_cl->props.protocol_name;
+ if (uuid_le_cmp(*uuid, *pn) == 0 &&
+ me_cl->client_id == client_id)
+ return mei_me_cl_get(me_cl);
+ }
+
+ return NULL;
+}
+
+
+/**
+ * mei_me_cl_by_uuid_id - locate me client by client id and uuid
+ * increases ref count
+ *
+ * @dev: the device structure
+ * @uuid: me client uuid
+ * @client_id: me client id
+ *
+ * Return: me client or null if not found
+ */
+struct mei_me_client *mei_me_cl_by_uuid_id(struct mei_device *dev,
+ const uuid_le *uuid, u8 client_id)
+{
+ struct mei_me_client *me_cl;
+
+ down_read(&dev->me_clients_rwsem);
+ me_cl = __mei_me_cl_by_uuid_id(dev, uuid, client_id);
+ up_read(&dev->me_clients_rwsem);
+
+ return me_cl;
+}
+
+/**
+ * mei_me_cl_rm_by_uuid - remove all me clients matching uuid
+ *
+ * @dev: the device structure
+ * @uuid: me client uuid
+ *
+ * Locking: called under "dev->device_lock" lock
+ */
+void mei_me_cl_rm_by_uuid(struct mei_device *dev, const uuid_le *uuid)
+{
+ struct mei_me_client *me_cl;
+
+ dev_dbg(dev->dev, "remove %pUl\n", uuid);
+
+ down_write(&dev->me_clients_rwsem);
+ me_cl = __mei_me_cl_by_uuid(dev, uuid);
+ __mei_me_cl_del(dev, me_cl);
+ up_write(&dev->me_clients_rwsem);
+}
+
+/**
+ * mei_me_cl_rm_by_uuid_id - remove all me clients matching client id
+ *
+ * @dev: the device structure
+ * @uuid: me client uuid
+ * @id: me client id
+ *
+ * Locking: called under "dev->device_lock" lock
+ */
+void mei_me_cl_rm_by_uuid_id(struct mei_device *dev, const uuid_le *uuid, u8 id)
+{
+ struct mei_me_client *me_cl;
+
+ dev_dbg(dev->dev, "remove %pUl %d\n", uuid, id);
+
+ down_write(&dev->me_clients_rwsem);
+ me_cl = __mei_me_cl_by_uuid_id(dev, uuid, id);
+ __mei_me_cl_del(dev, me_cl);
+ up_write(&dev->me_clients_rwsem);
+}
+
+/**
+ * mei_me_cl_rm_all - remove all me clients
+ *
+ * @dev: the device structure
+ *
+ * Locking: called under "dev->device_lock" lock
+ */
+void mei_me_cl_rm_all(struct mei_device *dev)
+{
+ struct mei_me_client *me_cl, *next;
+
+ down_write(&dev->me_clients_rwsem);
+ list_for_each_entry_safe(me_cl, next, &dev->me_clients, list)
+ __mei_me_cl_del(dev, me_cl);
+ up_write(&dev->me_clients_rwsem);
+}
+
+/**
+ * mei_cl_cmp_id - tells if the clients are the same
+ *
+ * @cl1: host client 1
+ * @cl2: host client 2
+ *
+ * Return: true - if the clients has same host and me ids
+ * false - otherwise
+ */
+static inline bool mei_cl_cmp_id(const struct mei_cl *cl1,
+ const struct mei_cl *cl2)
+{
+ return cl1 && cl2 &&
+ (cl1->host_client_id == cl2->host_client_id) &&
+ (mei_cl_me_id(cl1) == mei_cl_me_id(cl2));
+}
+
+/**
+ * mei_io_cb_free - free mei_cb_private related memory
+ *
+ * @cb: mei callback struct
+ */
+void mei_io_cb_free(struct mei_cl_cb *cb)
+{
+ if (cb == NULL)
+ return;
+
+ list_del(&cb->list);
+ kfree(cb->buf.data);
+ kfree(cb);
+}
+
+/**
+ * mei_tx_cb_queue - queue tx callback
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * @cb: mei callback struct
+ * @head: an instance of list to queue on
+ */
+static inline void mei_tx_cb_enqueue(struct mei_cl_cb *cb,
+ struct list_head *head)
+{
+ list_add_tail(&cb->list, head);
+ cb->cl->tx_cb_queued++;
+}
+
+/**
+ * mei_tx_cb_dequeue - dequeue tx callback
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * @cb: mei callback struct to dequeue and free
+ */
+static inline void mei_tx_cb_dequeue(struct mei_cl_cb *cb)
+{
+ if (!WARN_ON(cb->cl->tx_cb_queued == 0))
+ cb->cl->tx_cb_queued--;
+
+ mei_io_cb_free(cb);
+}
+
+/**
+ * mei_io_cb_init - allocate and initialize io callback
+ *
+ * @cl: mei client
+ * @type: operation type
+ * @fp: pointer to file structure
+ *
+ * Return: mei_cl_cb pointer or NULL;
+ */
+static struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl,
+ enum mei_cb_file_ops type,
+ const struct file *fp)
+{
+ struct mei_cl_cb *cb;
+
+ cb = kzalloc(sizeof(struct mei_cl_cb), GFP_KERNEL);
+ if (!cb)
+ return NULL;
+
+ INIT_LIST_HEAD(&cb->list);
+ cb->fp = fp;
+ cb->cl = cl;
+ cb->buf_idx = 0;
+ cb->fop_type = type;
+ return cb;
+}
+
+/**
+ * mei_io_list_flush_cl - removes cbs belonging to the cl.
+ *
+ * @head: an instance of our list structure
+ * @cl: host client
+ */
+static void mei_io_list_flush_cl(struct list_head *head,
+ const struct mei_cl *cl)
+{
+ struct mei_cl_cb *cb, *next;
+
+ list_for_each_entry_safe(cb, next, head, list) {
+ if (mei_cl_cmp_id(cl, cb->cl))
+ list_del_init(&cb->list);
+ }
+}
+
+/**
+ * mei_io_tx_list_free_cl - removes cb belonging to the cl and free them
+ *
+ * @head: An instance of our list structure
+ * @cl: host client
+ */
+static void mei_io_tx_list_free_cl(struct list_head *head,
+ const struct mei_cl *cl)
+{
+ struct mei_cl_cb *cb, *next;
+
+ list_for_each_entry_safe(cb, next, head, list) {
+ if (mei_cl_cmp_id(cl, cb->cl))
+ mei_tx_cb_dequeue(cb);
+ }
+}
+
+/**
+ * mei_io_list_free_fp - free cb from a list that matches file pointer
+ *
+ * @head: io list
+ * @fp: file pointer (matching cb file object), may be NULL
+ */
+static void mei_io_list_free_fp(struct list_head *head, const struct file *fp)
+{
+ struct mei_cl_cb *cb, *next;
+
+ list_for_each_entry_safe(cb, next, head, list)
+ if (!fp || fp == cb->fp)
+ mei_io_cb_free(cb);
+}
+
+/**
+ * mei_cl_alloc_cb - a convenient wrapper for allocating read cb
+ *
+ * @cl: host client
+ * @length: size of the buffer
+ * @fop_type: operation type
+ * @fp: associated file pointer (might be NULL)
+ *
+ * Return: cb on success and NULL on failure
+ */
+struct mei_cl_cb *mei_cl_alloc_cb(struct mei_cl *cl, size_t length,
+ enum mei_cb_file_ops fop_type,
+ const struct file *fp)
+{
+ struct mei_cl_cb *cb;
+
+ cb = mei_io_cb_init(cl, fop_type, fp);
+ if (!cb)
+ return NULL;
+
+ if (length == 0)
+ return cb;
+
+ cb->buf.data = kmalloc(length, GFP_KERNEL);
+ if (!cb->buf.data) {
+ mei_io_cb_free(cb);
+ return NULL;
+ }
+ cb->buf.size = length;
+
+ return cb;
+}
+
+/**
+ * mei_cl_enqueue_ctrl_wr_cb - a convenient wrapper for allocating
+ * and enqueuing of the control commands cb
+ *
+ * @cl: host client
+ * @length: size of the buffer
+ * @fop_type: operation type
+ * @fp: associated file pointer (might be NULL)
+ *
+ * Return: cb on success and NULL on failure
+ * Locking: called under "dev->device_lock" lock
+ */
+struct mei_cl_cb *mei_cl_enqueue_ctrl_wr_cb(struct mei_cl *cl, size_t length,
+ enum mei_cb_file_ops fop_type,
+ const struct file *fp)
+{
+ struct mei_cl_cb *cb;
+
+ /* for RX always allocate at least client's mtu */
+ if (length)
+ length = max_t(size_t, length, mei_cl_mtu(cl));
+
+ cb = mei_cl_alloc_cb(cl, length, fop_type, fp);
+ if (!cb)
+ return NULL;
+
+ list_add_tail(&cb->list, &cl->dev->ctrl_wr_list);
+ return cb;
+}
+
+/**
+ * mei_cl_read_cb - find this cl's callback in the read list
+ * for a specific file
+ *
+ * @cl: host client
+ * @fp: file pointer (matching cb file object), may be NULL
+ *
+ * Return: cb on success, NULL if cb is not found
+ */
+struct mei_cl_cb *mei_cl_read_cb(const struct mei_cl *cl, const struct file *fp)
+{
+ struct mei_cl_cb *cb;
+
+ list_for_each_entry(cb, &cl->rd_completed, list)
+ if (!fp || fp == cb->fp)
+ return cb;
+
+ return NULL;
+}
+
+/**
+ * mei_cl_flush_queues - flushes queue lists belonging to cl.
+ *
+ * @cl: host client
+ * @fp: file pointer (matching cb file object), may be NULL
+ *
+ * Return: 0 on success, -EINVAL if cl or cl->dev is NULL.
+ */
+int mei_cl_flush_queues(struct mei_cl *cl, const struct file *fp)
+{
+ struct mei_device *dev;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -EINVAL;
+
+ dev = cl->dev;
+
+ cl_dbg(dev, cl, "remove list entry belonging to cl\n");
+ mei_io_tx_list_free_cl(&cl->dev->write_list, cl);
+ mei_io_tx_list_free_cl(&cl->dev->write_waiting_list, cl);
+ mei_io_list_flush_cl(&cl->dev->ctrl_wr_list, cl);
+ mei_io_list_flush_cl(&cl->dev->ctrl_rd_list, cl);
+ mei_io_list_free_fp(&cl->rd_pending, fp);
+ mei_io_list_free_fp(&cl->rd_completed, fp);
+
+ return 0;
+}
+
+/**
+ * mei_cl_init - initializes cl.
+ *
+ * @cl: host client to be initialized
+ * @dev: mei device
+ */
+static void mei_cl_init(struct mei_cl *cl, struct mei_device *dev)
+{
+ memset(cl, 0, sizeof(struct mei_cl));
+ init_waitqueue_head(&cl->wait);
+ init_waitqueue_head(&cl->rx_wait);
+ init_waitqueue_head(&cl->tx_wait);
+ init_waitqueue_head(&cl->ev_wait);
+ INIT_LIST_HEAD(&cl->rd_completed);
+ INIT_LIST_HEAD(&cl->rd_pending);
+ INIT_LIST_HEAD(&cl->link);
+ cl->writing_state = MEI_IDLE;
+ cl->state = MEI_FILE_UNINITIALIZED;
+ cl->dev = dev;
+}
+
+/**
+ * mei_cl_allocate - allocates cl structure and sets it up.
+ *
+ * @dev: mei device
+ * Return: The allocated file or NULL on failure
+ */
+struct mei_cl *mei_cl_allocate(struct mei_device *dev)
+{
+ struct mei_cl *cl;
+
+ cl = kmalloc(sizeof(struct mei_cl), GFP_KERNEL);
+ if (!cl)
+ return NULL;
+
+ mei_cl_init(cl, dev);
+
+ return cl;
+}
+
+/**
+ * mei_cl_link - allocate host id in the host map
+ *
+ * @cl: host client
+ *
+ * Return: 0 on success
+ * -EINVAL on incorrect values
+ * -EMFILE if open count exceeded.
+ */
+int mei_cl_link(struct mei_cl *cl)
+{
+ struct mei_device *dev;
+ int id;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -EINVAL;
+
+ dev = cl->dev;
+
+ id = find_first_zero_bit(dev->host_clients_map, MEI_CLIENTS_MAX);
+ if (id >= MEI_CLIENTS_MAX) {
+ dev_err(dev->dev, "id exceeded %d", MEI_CLIENTS_MAX);
+ return -EMFILE;
+ }
+
+ if (dev->open_handle_count >= MEI_MAX_OPEN_HANDLE_COUNT) {
+ dev_err(dev->dev, "open_handle_count exceeded %d",
+ MEI_MAX_OPEN_HANDLE_COUNT);
+ return -EMFILE;
+ }
+
+ dev->open_handle_count++;
+
+ cl->host_client_id = id;
+ list_add_tail(&cl->link, &dev->file_list);
+
+ set_bit(id, dev->host_clients_map);
+
+ cl->state = MEI_FILE_INITIALIZING;
+
+ cl_dbg(dev, cl, "link cl\n");
+ return 0;
+}
+
+/**
+ * mei_cl_unlink - remove host client from the list
+ *
+ * @cl: host client
+ *
+ * Return: always 0
+ */
+int mei_cl_unlink(struct mei_cl *cl)
+{
+ struct mei_device *dev;
+
+ /* don't shout on error exit path */
+ if (!cl)
+ return 0;
+
+ if (WARN_ON(!cl->dev))
+ return 0;
+
+ dev = cl->dev;
+
+ cl_dbg(dev, cl, "unlink client");
+
+ if (dev->open_handle_count > 0)
+ dev->open_handle_count--;
+
+ /* never clear the 0 bit */
+ if (cl->host_client_id)
+ clear_bit(cl->host_client_id, dev->host_clients_map);
+
+ list_del_init(&cl->link);
+
+ cl->state = MEI_FILE_UNINITIALIZED;
+ cl->writing_state = MEI_IDLE;
+
+ WARN_ON(!list_empty(&cl->rd_completed) ||
+ !list_empty(&cl->rd_pending) ||
+ !list_empty(&cl->link));
+
+ return 0;
+}
+
+void mei_host_client_init(struct mei_device *dev)
+{
+ dev->dev_state = MEI_DEV_ENABLED;
+ dev->reset_count = 0;
+
+ schedule_work(&dev->bus_rescan_work);
+
+ pm_runtime_mark_last_busy(dev->dev);
+ dev_dbg(dev->dev, "rpm: autosuspend\n");
+ pm_request_autosuspend(dev->dev);
+}
+
+/**
+ * mei_hbuf_acquire - try to acquire host buffer
+ *
+ * @dev: the device structure
+ * Return: true if host buffer was acquired
+ */
+bool mei_hbuf_acquire(struct mei_device *dev)
+{
+ if (mei_pg_state(dev) == MEI_PG_ON ||
+ mei_pg_in_transition(dev)) {
+ dev_dbg(dev->dev, "device is in pg\n");
+ return false;
+ }
+
+ if (!dev->hbuf_is_ready) {
+ dev_dbg(dev->dev, "hbuf is not ready\n");
+ return false;
+ }
+
+ dev->hbuf_is_ready = false;
+
+ return true;
+}
+
+/**
+ * mei_cl_wake_all - wake up readers, writers and event waiters so
+ * they can be interrupted
+ *
+ * @cl: host client
+ */
+static void mei_cl_wake_all(struct mei_cl *cl)
+{
+ struct mei_device *dev = cl->dev;
+
+ /* synchronized under device mutex */
+ if (waitqueue_active(&cl->rx_wait)) {
+ cl_dbg(dev, cl, "Waking up reading client!\n");
+ wake_up_interruptible(&cl->rx_wait);
+ }
+ /* synchronized under device mutex */
+ if (waitqueue_active(&cl->tx_wait)) {
+ cl_dbg(dev, cl, "Waking up writing client!\n");
+ wake_up_interruptible(&cl->tx_wait);
+ }
+ /* synchronized under device mutex */
+ if (waitqueue_active(&cl->ev_wait)) {
+ cl_dbg(dev, cl, "Waking up waiting for event clients!\n");
+ wake_up_interruptible(&cl->ev_wait);
+ }
+ /* synchronized under device mutex */
+ if (waitqueue_active(&cl->wait)) {
+ cl_dbg(dev, cl, "Waking up ctrl write clients!\n");
+ wake_up(&cl->wait);
+ }
+}
+
+/**
+ * mei_cl_set_disconnected - set disconnected state and clear
+ * associated states and resources
+ *
+ * @cl: host client
+ */
+static void mei_cl_set_disconnected(struct mei_cl *cl)
+{
+ struct mei_device *dev = cl->dev;
+
+ if (cl->state == MEI_FILE_DISCONNECTED ||
+ cl->state <= MEI_FILE_INITIALIZING)
+ return;
+
+ cl->state = MEI_FILE_DISCONNECTED;
+ mei_io_tx_list_free_cl(&dev->write_list, cl);
+ mei_io_tx_list_free_cl(&dev->write_waiting_list, cl);
+ mei_io_list_flush_cl(&dev->ctrl_rd_list, cl);
+ mei_io_list_flush_cl(&dev->ctrl_wr_list, cl);
+ mei_cl_wake_all(cl);
+ cl->rx_flow_ctrl_creds = 0;
+ cl->tx_flow_ctrl_creds = 0;
+ cl->timer_count = 0;
+
+ if (!cl->me_cl)
+ return;
+
+ if (!WARN_ON(cl->me_cl->connect_count == 0))
+ cl->me_cl->connect_count--;
+
+ if (cl->me_cl->connect_count == 0)
+ cl->me_cl->tx_flow_ctrl_creds = 0;
+
+ mei_me_cl_put(cl->me_cl);
+ cl->me_cl = NULL;
+}
+
+static int mei_cl_set_connecting(struct mei_cl *cl, struct mei_me_client *me_cl)
+{
+ if (!mei_me_cl_get(me_cl))
+ return -ENOENT;
+
+ /* only one connection is allowed for fixed address clients */
+ if (me_cl->props.fixed_address) {
+ if (me_cl->connect_count) {
+ mei_me_cl_put(me_cl);
+ return -EBUSY;
+ }
+ }
+
+ cl->me_cl = me_cl;
+ cl->state = MEI_FILE_CONNECTING;
+ cl->me_cl->connect_count++;
+
+ return 0;
+}
+
+/*
+ * mei_cl_send_disconnect - send disconnect request
+ *
+ * @cl: host client
+ * @cb: callback block
+ *
+ * Return: 0, OK; otherwise, error.
+ */
+static int mei_cl_send_disconnect(struct mei_cl *cl, struct mei_cl_cb *cb)
+{
+ struct mei_device *dev;
+ int ret;
+
+ dev = cl->dev;
+
+ ret = mei_hbm_cl_disconnect_req(dev, cl);
+ cl->status = ret;
+ if (ret) {
+ cl->state = MEI_FILE_DISCONNECT_REPLY;
+ return ret;
+ }
+
+ list_move_tail(&cb->list, &dev->ctrl_rd_list);
+ cl->timer_count = MEI_CONNECT_TIMEOUT;
+ mei_schedule_stall_timer(dev);
+
+ return 0;
+}
+
+/**
+ * mei_cl_irq_disconnect - processes close related operation from
+ * interrupt thread context - send disconnect request
+ *
+ * @cl: client
+ * @cb: callback block.
+ * @cmpl_list: complete list.
+ *
+ * Return: 0, OK; otherwise, error.
+ */
+int mei_cl_irq_disconnect(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct list_head *cmpl_list)
+{
+ struct mei_device *dev = cl->dev;
+ u32 msg_slots;
+ int slots;
+ int ret;
+
+ msg_slots = mei_hbm2slots(sizeof(struct hbm_client_connect_request));
+ slots = mei_hbuf_empty_slots(dev);
+ if (slots < 0)
+ return -EOVERFLOW;
+
+ if ((u32)slots < msg_slots)
+ return -EMSGSIZE;
+
+ ret = mei_cl_send_disconnect(cl, cb);
+ if (ret)
+ list_move_tail(&cb->list, cmpl_list);
+
+ return ret;
+}
+
+/**
+ * __mei_cl_disconnect - disconnect host client from the me one
+ * internal function runtime pm has to be already acquired
+ *
+ * @cl: host client
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+static int __mei_cl_disconnect(struct mei_cl *cl)
+{
+ struct mei_device *dev;
+ struct mei_cl_cb *cb;
+ int rets;
+
+ dev = cl->dev;
+
+ cl->state = MEI_FILE_DISCONNECTING;
+
+ cb = mei_cl_enqueue_ctrl_wr_cb(cl, 0, MEI_FOP_DISCONNECT, NULL);
+ if (!cb) {
+ rets = -ENOMEM;
+ goto out;
+ }
+
+ if (mei_hbuf_acquire(dev)) {
+ rets = mei_cl_send_disconnect(cl, cb);
+ if (rets) {
+ cl_err(dev, cl, "failed to disconnect.\n");
+ goto out;
+ }
+ }
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(cl->wait,
+ cl->state == MEI_FILE_DISCONNECT_REPLY ||
+ cl->state == MEI_FILE_DISCONNECTED,
+ mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+ mutex_lock(&dev->device_lock);
+
+ rets = cl->status;
+ if (cl->state != MEI_FILE_DISCONNECT_REPLY &&
+ cl->state != MEI_FILE_DISCONNECTED) {
+ cl_dbg(dev, cl, "timeout on disconnect from FW client.\n");
+ rets = -ETIME;
+ }
+
+out:
+ /* we disconnect also on error */
+ mei_cl_set_disconnected(cl);
+ if (!rets)
+ cl_dbg(dev, cl, "successfully disconnected from FW client.\n");
+
+ mei_io_cb_free(cb);
+ return rets;
+}
+
+/**
+ * mei_cl_disconnect - disconnect host client from the me one
+ *
+ * @cl: host client
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+int mei_cl_disconnect(struct mei_cl *cl)
+{
+ struct mei_device *dev;
+ int rets;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ dev = cl->dev;
+
+ cl_dbg(dev, cl, "disconnecting");
+
+ if (!mei_cl_is_connected(cl))
+ return 0;
+
+ if (mei_cl_is_fixed_address(cl)) {
+ mei_cl_set_disconnected(cl);
+ return 0;
+ }
+
+ if (dev->dev_state == MEI_DEV_POWER_DOWN) {
+ cl_dbg(dev, cl, "Device is powering down, don't bother with disconnection\n");
+ mei_cl_set_disconnected(cl);
+ return 0;
+ }
+
+ rets = pm_runtime_get(dev->dev);
+ if (rets < 0 && rets != -EINPROGRESS) {
+ pm_runtime_put_noidle(dev->dev);
+ cl_err(dev, cl, "rpm: get failed %d\n", rets);
+ return rets;
+ }
+
+ rets = __mei_cl_disconnect(cl);
+
+ cl_dbg(dev, cl, "rpm: autosuspend\n");
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+
+ return rets;
+}
+
+
+/**
+ * mei_cl_is_other_connecting - checks if other
+ * client with the same me client id is connecting
+ *
+ * @cl: private data of the file object
+ *
+ * Return: true if other client is connected, false - otherwise.
+ */
+static bool mei_cl_is_other_connecting(struct mei_cl *cl)
+{
+ struct mei_device *dev;
+ struct mei_cl_cb *cb;
+
+ dev = cl->dev;
+
+ list_for_each_entry(cb, &dev->ctrl_rd_list, list) {
+ if (cb->fop_type == MEI_FOP_CONNECT &&
+ mei_cl_me_id(cl) == mei_cl_me_id(cb->cl))
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * mei_cl_send_connect - send connect request
+ *
+ * @cl: host client
+ * @cb: callback block
+ *
+ * Return: 0, OK; otherwise, error.
+ */
+static int mei_cl_send_connect(struct mei_cl *cl, struct mei_cl_cb *cb)
+{
+ struct mei_device *dev;
+ int ret;
+
+ dev = cl->dev;
+
+ ret = mei_hbm_cl_connect_req(dev, cl);
+ cl->status = ret;
+ if (ret) {
+ cl->state = MEI_FILE_DISCONNECT_REPLY;
+ return ret;
+ }
+
+ list_move_tail(&cb->list, &dev->ctrl_rd_list);
+ cl->timer_count = MEI_CONNECT_TIMEOUT;
+ mei_schedule_stall_timer(dev);
+ return 0;
+}
+
+/**
+ * mei_cl_irq_connect - send connect request in irq_thread context
+ *
+ * @cl: host client
+ * @cb: callback block
+ * @cmpl_list: complete list
+ *
+ * Return: 0, OK; otherwise, error.
+ */
+int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct list_head *cmpl_list)
+{
+ struct mei_device *dev = cl->dev;
+ u32 msg_slots;
+ int slots;
+ int rets;
+
+ if (mei_cl_is_other_connecting(cl))
+ return 0;
+
+ msg_slots = mei_hbm2slots(sizeof(struct hbm_client_connect_request));
+ slots = mei_hbuf_empty_slots(dev);
+ if (slots < 0)
+ return -EOVERFLOW;
+
+ if ((u32)slots < msg_slots)
+ return -EMSGSIZE;
+
+ rets = mei_cl_send_connect(cl, cb);
+ if (rets)
+ list_move_tail(&cb->list, cmpl_list);
+
+ return rets;
+}
+
+/**
+ * mei_cl_connect - connect host client to the me one
+ *
+ * @cl: host client
+ * @me_cl: me client
+ * @fp: pointer to file structure
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+int mei_cl_connect(struct mei_cl *cl, struct mei_me_client *me_cl,
+ const struct file *fp)
+{
+ struct mei_device *dev;
+ struct mei_cl_cb *cb;
+ int rets;
+
+ if (WARN_ON(!cl || !cl->dev || !me_cl))
+ return -ENODEV;
+
+ dev = cl->dev;
+
+ rets = mei_cl_set_connecting(cl, me_cl);
+ if (rets)
+ goto nortpm;
+
+ if (mei_cl_is_fixed_address(cl)) {
+ cl->state = MEI_FILE_CONNECTED;
+ rets = 0;
+ goto nortpm;
+ }
+
+ rets = pm_runtime_get(dev->dev);
+ if (rets < 0 && rets != -EINPROGRESS) {
+ pm_runtime_put_noidle(dev->dev);
+ cl_err(dev, cl, "rpm: get failed %d\n", rets);
+ goto nortpm;
+ }
+
+ cb = mei_cl_enqueue_ctrl_wr_cb(cl, 0, MEI_FOP_CONNECT, fp);
+ if (!cb) {
+ rets = -ENOMEM;
+ goto out;
+ }
+
+ /* run hbuf acquire last so we don't have to undo */
+ if (!mei_cl_is_other_connecting(cl) && mei_hbuf_acquire(dev)) {
+ rets = mei_cl_send_connect(cl, cb);
+ if (rets)
+ goto out;
+ }
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(cl->wait,
+ (cl->state == MEI_FILE_CONNECTED ||
+ cl->state == MEI_FILE_DISCONNECTED ||
+ cl->state == MEI_FILE_DISCONNECT_REQUIRED ||
+ cl->state == MEI_FILE_DISCONNECT_REPLY),
+ mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+ mutex_lock(&dev->device_lock);
+
+ if (!mei_cl_is_connected(cl)) {
+ if (cl->state == MEI_FILE_DISCONNECT_REQUIRED) {
+ mei_io_list_flush_cl(&dev->ctrl_rd_list, cl);
+ mei_io_list_flush_cl(&dev->ctrl_wr_list, cl);
+ /* ignore disconnect return valuue;
+ * in case of failure reset will be invoked
+ */
+ __mei_cl_disconnect(cl);
+ rets = -EFAULT;
+ goto out;
+ }
+
+ /* timeout or something went really wrong */
+ if (!cl->status)
+ cl->status = -EFAULT;
+ }
+
+ rets = cl->status;
+out:
+ cl_dbg(dev, cl, "rpm: autosuspend\n");
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+
+ mei_io_cb_free(cb);
+
+nortpm:
+ if (!mei_cl_is_connected(cl))
+ mei_cl_set_disconnected(cl);
+
+ return rets;
+}
+
+/**
+ * mei_cl_alloc_linked - allocate and link host client
+ *
+ * @dev: the device structure
+ *
+ * Return: cl on success ERR_PTR on failure
+ */
+struct mei_cl *mei_cl_alloc_linked(struct mei_device *dev)
+{
+ struct mei_cl *cl;
+ int ret;
+
+ cl = mei_cl_allocate(dev);
+ if (!cl) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = mei_cl_link(cl);
+ if (ret)
+ goto err;
+
+ return cl;
+err:
+ kfree(cl);
+ return ERR_PTR(ret);
+}
+
+/**
+ * mei_cl_tx_flow_ctrl_creds - checks flow_control credits for cl.
+ *
+ * @cl: host client
+ *
+ * Return: 1 if tx_flow_ctrl_creds >0, 0 - otherwise.
+ */
+static int mei_cl_tx_flow_ctrl_creds(struct mei_cl *cl)
+{
+ if (WARN_ON(!cl || !cl->me_cl))
+ return -EINVAL;
+
+ if (cl->tx_flow_ctrl_creds > 0)
+ return 1;
+
+ if (mei_cl_is_fixed_address(cl))
+ return 1;
+
+ if (mei_cl_is_single_recv_buf(cl)) {
+ if (cl->me_cl->tx_flow_ctrl_creds > 0)
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * mei_cl_tx_flow_ctrl_creds_reduce - reduces transmit flow control credits
+ * for a client
+ *
+ * @cl: host client
+ *
+ * Return:
+ * 0 on success
+ * -EINVAL when ctrl credits are <= 0
+ */
+static int mei_cl_tx_flow_ctrl_creds_reduce(struct mei_cl *cl)
+{
+ if (WARN_ON(!cl || !cl->me_cl))
+ return -EINVAL;
+
+ if (mei_cl_is_fixed_address(cl))
+ return 0;
+
+ if (mei_cl_is_single_recv_buf(cl)) {
+ if (WARN_ON(cl->me_cl->tx_flow_ctrl_creds <= 0))
+ return -EINVAL;
+ cl->me_cl->tx_flow_ctrl_creds--;
+ } else {
+ if (WARN_ON(cl->tx_flow_ctrl_creds <= 0))
+ return -EINVAL;
+ cl->tx_flow_ctrl_creds--;
+ }
+ return 0;
+}
+
+/**
+ * mei_cl_notify_fop2req - convert fop to proper request
+ *
+ * @fop: client notification start response command
+ *
+ * Return: MEI_HBM_NOTIFICATION_START/STOP
+ */
+u8 mei_cl_notify_fop2req(enum mei_cb_file_ops fop)
+{
+ if (fop == MEI_FOP_NOTIFY_START)
+ return MEI_HBM_NOTIFICATION_START;
+ else
+ return MEI_HBM_NOTIFICATION_STOP;
+}
+
+/**
+ * mei_cl_notify_req2fop - convert notification request top file operation type
+ *
+ * @req: hbm notification request type
+ *
+ * Return: MEI_FOP_NOTIFY_START/STOP
+ */
+enum mei_cb_file_ops mei_cl_notify_req2fop(u8 req)
+{
+ if (req == MEI_HBM_NOTIFICATION_START)
+ return MEI_FOP_NOTIFY_START;
+ else
+ return MEI_FOP_NOTIFY_STOP;
+}
+
+/**
+ * mei_cl_irq_notify - send notification request in irq_thread context
+ *
+ * @cl: client
+ * @cb: callback block.
+ * @cmpl_list: complete list.
+ *
+ * Return: 0 on such and error otherwise.
+ */
+int mei_cl_irq_notify(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct list_head *cmpl_list)
+{
+ struct mei_device *dev = cl->dev;
+ u32 msg_slots;
+ int slots;
+ int ret;
+ bool request;
+
+ msg_slots = mei_hbm2slots(sizeof(struct hbm_client_connect_request));
+ slots = mei_hbuf_empty_slots(dev);
+ if (slots < 0)
+ return -EOVERFLOW;
+
+ if ((u32)slots < msg_slots)
+ return -EMSGSIZE;
+
+ request = mei_cl_notify_fop2req(cb->fop_type);
+ ret = mei_hbm_cl_notify_req(dev, cl, request);
+ if (ret) {
+ cl->status = ret;
+ list_move_tail(&cb->list, cmpl_list);
+ return ret;
+ }
+
+ list_move_tail(&cb->list, &dev->ctrl_rd_list);
+ return 0;
+}
+
+/**
+ * mei_cl_notify_request - send notification stop/start request
+ *
+ * @cl: host client
+ * @fp: associate request with file
+ * @request: 1 for start or 0 for stop
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * Return: 0 on such and error otherwise.
+ */
+int mei_cl_notify_request(struct mei_cl *cl,
+ const struct file *fp, u8 request)
+{
+ struct mei_device *dev;
+ struct mei_cl_cb *cb;
+ enum mei_cb_file_ops fop_type;
+ int rets;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ dev = cl->dev;
+
+ if (!dev->hbm_f_ev_supported) {
+ cl_dbg(dev, cl, "notifications not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (!mei_cl_is_connected(cl))
+ return -ENODEV;
+
+ rets = pm_runtime_get(dev->dev);
+ if (rets < 0 && rets != -EINPROGRESS) {
+ pm_runtime_put_noidle(dev->dev);
+ cl_err(dev, cl, "rpm: get failed %d\n", rets);
+ return rets;
+ }
+
+ fop_type = mei_cl_notify_req2fop(request);
+ cb = mei_cl_enqueue_ctrl_wr_cb(cl, 0, fop_type, fp);
+ if (!cb) {
+ rets = -ENOMEM;
+ goto out;
+ }
+
+ if (mei_hbuf_acquire(dev)) {
+ if (mei_hbm_cl_notify_req(dev, cl, request)) {
+ rets = -ENODEV;
+ goto out;
+ }
+ list_move_tail(&cb->list, &dev->ctrl_rd_list);
+ }
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(cl->wait,
+ cl->notify_en == request || !mei_cl_is_connected(cl),
+ mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+ mutex_lock(&dev->device_lock);
+
+ if (cl->notify_en != request && !cl->status)
+ cl->status = -EFAULT;
+
+ rets = cl->status;
+
+out:
+ cl_dbg(dev, cl, "rpm: autosuspend\n");
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+
+ mei_io_cb_free(cb);
+ return rets;
+}
+
+/**
+ * mei_cl_notify - raise notification
+ *
+ * @cl: host client
+ *
+ * Locking: called under "dev->device_lock" lock
+ */
+void mei_cl_notify(struct mei_cl *cl)
+{
+ struct mei_device *dev;
+
+ if (!cl || !cl->dev)
+ return;
+
+ dev = cl->dev;
+
+ if (!cl->notify_en)
+ return;
+
+ cl_dbg(dev, cl, "notify event");
+ cl->notify_ev = true;
+ if (!mei_cl_bus_notify_event(cl))
+ wake_up_interruptible(&cl->ev_wait);
+
+ if (cl->ev_async)
+ kill_fasync(&cl->ev_async, SIGIO, POLL_PRI);
+
+}
+
+/**
+ * mei_cl_notify_get - get or wait for notification event
+ *
+ * @cl: host client
+ * @block: this request is blocking
+ * @notify_ev: true if notification event was received
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * Return: 0 on such and error otherwise.
+ */
+int mei_cl_notify_get(struct mei_cl *cl, bool block, bool *notify_ev)
+{
+ struct mei_device *dev;
+ int rets;
+
+ *notify_ev = false;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ dev = cl->dev;
+
+ if (!dev->hbm_f_ev_supported) {
+ cl_dbg(dev, cl, "notifications not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (!mei_cl_is_connected(cl))
+ return -ENODEV;
+
+ if (cl->notify_ev)
+ goto out;
+
+ if (!block)
+ return -EAGAIN;
+
+ mutex_unlock(&dev->device_lock);
+ rets = wait_event_interruptible(cl->ev_wait, cl->notify_ev);
+ mutex_lock(&dev->device_lock);
+
+ if (rets < 0)
+ return rets;
+
+out:
+ *notify_ev = cl->notify_ev;
+ cl->notify_ev = false;
+ return 0;
+}
+
+/**
+ * mei_cl_read_start - the start read client message function.
+ *
+ * @cl: host client
+ * @length: number of bytes to read
+ * @fp: pointer to file structure
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+int mei_cl_read_start(struct mei_cl *cl, size_t length, const struct file *fp)
+{
+ struct mei_device *dev;
+ struct mei_cl_cb *cb;
+ int rets;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ dev = cl->dev;
+
+ if (!mei_cl_is_connected(cl))
+ return -ENODEV;
+
+ if (!mei_me_cl_is_active(cl->me_cl)) {
+ cl_err(dev, cl, "no such me client\n");
+ return -ENOTTY;
+ }
+
+ if (mei_cl_is_fixed_address(cl))
+ return 0;
+
+ /* HW currently supports only one pending read */
+ if (cl->rx_flow_ctrl_creds)
+ return -EBUSY;
+
+ cb = mei_cl_enqueue_ctrl_wr_cb(cl, length, MEI_FOP_READ, fp);
+ if (!cb)
+ return -ENOMEM;
+
+ rets = pm_runtime_get(dev->dev);
+ if (rets < 0 && rets != -EINPROGRESS) {
+ pm_runtime_put_noidle(dev->dev);
+ cl_err(dev, cl, "rpm: get failed %d\n", rets);
+ goto nortpm;
+ }
+
+ rets = 0;
+ if (mei_hbuf_acquire(dev)) {
+ rets = mei_hbm_cl_flow_control_req(dev, cl);
+ if (rets < 0)
+ goto out;
+
+ list_move_tail(&cb->list, &cl->rd_pending);
+ }
+ cl->rx_flow_ctrl_creds++;
+
+out:
+ cl_dbg(dev, cl, "rpm: autosuspend\n");
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+nortpm:
+ if (rets)
+ mei_io_cb_free(cb);
+
+ return rets;
+}
+
+/**
+ * mei_msg_hdr_init - initialize mei message header
+ *
+ * @mei_hdr: mei message header
+ * @cb: message callback structure
+ */
+static void mei_msg_hdr_init(struct mei_msg_hdr *mei_hdr, struct mei_cl_cb *cb)
+{
+ mei_hdr->host_addr = mei_cl_host_addr(cb->cl);
+ mei_hdr->me_addr = mei_cl_me_id(cb->cl);
+ mei_hdr->length = 0;
+ mei_hdr->reserved = 0;
+ mei_hdr->msg_complete = 0;
+ mei_hdr->dma_ring = 0;
+ mei_hdr->internal = cb->internal;
+}
+
+/**
+ * mei_cl_irq_write - write a message to device
+ * from the interrupt thread context
+ *
+ * @cl: client
+ * @cb: callback block.
+ * @cmpl_list: complete list.
+ *
+ * Return: 0, OK; otherwise error.
+ */
+int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct list_head *cmpl_list)
+{
+ struct mei_device *dev;
+ struct mei_msg_data *buf;
+ struct mei_msg_hdr mei_hdr;
+ size_t hdr_len = sizeof(mei_hdr);
+ size_t len;
+ size_t hbuf_len;
+ int hbuf_slots;
+ int rets;
+ bool first_chunk;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ dev = cl->dev;
+
+ buf = &cb->buf;
+
+ first_chunk = cb->buf_idx == 0;
+
+ rets = first_chunk ? mei_cl_tx_flow_ctrl_creds(cl) : 1;
+ if (rets < 0)
+ goto err;
+
+ if (rets == 0) {
+ cl_dbg(dev, cl, "No flow control credentials: not sending.\n");
+ return 0;
+ }
+
+ len = buf->size - cb->buf_idx;
+ hbuf_slots = mei_hbuf_empty_slots(dev);
+ if (hbuf_slots < 0) {
+ rets = -EOVERFLOW;
+ goto err;
+ }
+
+ hbuf_len = mei_slots2data(hbuf_slots);
+
+ mei_msg_hdr_init(&mei_hdr, cb);
+
+ /**
+ * Split the message only if we can write the whole host buffer
+ * otherwise wait for next time the host buffer is empty.
+ */
+ if (len + hdr_len <= hbuf_len) {
+ mei_hdr.length = len;
+ mei_hdr.msg_complete = 1;
+ } else if ((u32)hbuf_slots == mei_hbuf_depth(dev)) {
+ mei_hdr.length = hbuf_len - hdr_len;
+ } else {
+ return 0;
+ }
+
+ cl_dbg(dev, cl, "buf: size = %zu idx = %zu\n",
+ cb->buf.size, cb->buf_idx);
+
+ rets = mei_write_message(dev, &mei_hdr, hdr_len,
+ buf->data + cb->buf_idx, mei_hdr.length);
+ if (rets)
+ goto err;
+
+ cl->status = 0;
+ cl->writing_state = MEI_WRITING;
+ cb->buf_idx += mei_hdr.length;
+
+ if (first_chunk) {
+ if (mei_cl_tx_flow_ctrl_creds_reduce(cl)) {
+ rets = -EIO;
+ goto err;
+ }
+ }
+
+ if (mei_hdr.msg_complete)
+ list_move_tail(&cb->list, &dev->write_waiting_list);
+
+ return 0;
+
+err:
+ cl->status = rets;
+ list_move_tail(&cb->list, cmpl_list);
+ return rets;
+}
+
+/**
+ * mei_cl_write - submit a write cb to mei device
+ * assumes device_lock is locked
+ *
+ * @cl: host client
+ * @cb: write callback with filled data
+ *
+ * Return: number of bytes sent on success, <0 on failure.
+ */
+ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb)
+{
+ struct mei_device *dev;
+ struct mei_msg_data *buf;
+ struct mei_msg_hdr mei_hdr;
+ size_t hdr_len = sizeof(mei_hdr);
+ size_t len;
+ size_t hbuf_len;
+ int hbuf_slots;
+ ssize_t rets;
+ bool blocking;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ if (WARN_ON(!cb))
+ return -EINVAL;
+
+ dev = cl->dev;
+
+ buf = &cb->buf;
+ len = buf->size;
+ blocking = cb->blocking;
+
+ cl_dbg(dev, cl, "len=%zd\n", len);
+
+ rets = pm_runtime_get(dev->dev);
+ if (rets < 0 && rets != -EINPROGRESS) {
+ pm_runtime_put_noidle(dev->dev);
+ cl_err(dev, cl, "rpm: get failed %zd\n", rets);
+ goto free;
+ }
+
+ cb->buf_idx = 0;
+ cl->writing_state = MEI_IDLE;
+
+
+ rets = mei_cl_tx_flow_ctrl_creds(cl);
+ if (rets < 0)
+ goto err;
+
+ mei_msg_hdr_init(&mei_hdr, cb);
+
+ if (rets == 0) {
+ cl_dbg(dev, cl, "No flow control credentials: not sending.\n");
+ rets = len;
+ goto out;
+ }
+
+ if (!mei_hbuf_acquire(dev)) {
+ cl_dbg(dev, cl, "Cannot acquire the host buffer: not sending.\n");
+ rets = len;
+ goto out;
+ }
+
+ hbuf_slots = mei_hbuf_empty_slots(dev);
+ if (hbuf_slots < 0) {
+ rets = -EOVERFLOW;
+ goto out;
+ }
+
+ hbuf_len = mei_slots2data(hbuf_slots);
+
+ if (len + hdr_len <= hbuf_len) {
+ mei_hdr.length = len;
+ mei_hdr.msg_complete = 1;
+ } else {
+ mei_hdr.length = hbuf_len - hdr_len;
+ }
+
+ rets = mei_write_message(dev, &mei_hdr, hdr_len,
+ buf->data, mei_hdr.length);
+ if (rets)
+ goto err;
+
+ rets = mei_cl_tx_flow_ctrl_creds_reduce(cl);
+ if (rets)
+ goto err;
+
+ cl->writing_state = MEI_WRITING;
+ cb->buf_idx = mei_hdr.length;
+
+out:
+ if (mei_hdr.msg_complete)
+ mei_tx_cb_enqueue(cb, &dev->write_waiting_list);
+ else
+ mei_tx_cb_enqueue(cb, &dev->write_list);
+
+ cb = NULL;
+ if (blocking && cl->writing_state != MEI_WRITE_COMPLETE) {
+
+ mutex_unlock(&dev->device_lock);
+ rets = wait_event_interruptible(cl->tx_wait,
+ cl->writing_state == MEI_WRITE_COMPLETE ||
+ (!mei_cl_is_connected(cl)));
+ mutex_lock(&dev->device_lock);
+ /* wait_event_interruptible returns -ERESTARTSYS */
+ if (rets) {
+ if (signal_pending(current))
+ rets = -EINTR;
+ goto err;
+ }
+ if (cl->writing_state != MEI_WRITE_COMPLETE) {
+ rets = -EFAULT;
+ goto err;
+ }
+ }
+
+ rets = len;
+err:
+ cl_dbg(dev, cl, "rpm: autosuspend\n");
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+free:
+ mei_io_cb_free(cb);
+
+ return rets;
+}
+
+
+/**
+ * mei_cl_complete - processes completed operation for a client
+ *
+ * @cl: private data of the file object.
+ * @cb: callback block.
+ */
+void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb)
+{
+ struct mei_device *dev = cl->dev;
+
+ switch (cb->fop_type) {
+ case MEI_FOP_WRITE:
+ mei_tx_cb_dequeue(cb);
+ cl->writing_state = MEI_WRITE_COMPLETE;
+ if (waitqueue_active(&cl->tx_wait)) {
+ wake_up_interruptible(&cl->tx_wait);
+ } else {
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_request_autosuspend(dev->dev);
+ }
+ break;
+
+ case MEI_FOP_READ:
+ list_add_tail(&cb->list, &cl->rd_completed);
+ if (!mei_cl_is_fixed_address(cl) &&
+ !WARN_ON(!cl->rx_flow_ctrl_creds))
+ cl->rx_flow_ctrl_creds--;
+ if (!mei_cl_bus_rx_event(cl))
+ wake_up_interruptible(&cl->rx_wait);
+ break;
+
+ case MEI_FOP_CONNECT:
+ case MEI_FOP_DISCONNECT:
+ case MEI_FOP_NOTIFY_STOP:
+ case MEI_FOP_NOTIFY_START:
+ if (waitqueue_active(&cl->wait))
+ wake_up(&cl->wait);
+
+ break;
+ case MEI_FOP_DISCONNECT_RSP:
+ mei_io_cb_free(cb);
+ mei_cl_set_disconnected(cl);
+ break;
+ default:
+ BUG_ON(0);
+ }
+}
+
+
+/**
+ * mei_cl_all_disconnect - disconnect forcefully all connected clients
+ *
+ * @dev: mei device
+ */
+void mei_cl_all_disconnect(struct mei_device *dev)
+{
+ struct mei_cl *cl;
+
+ list_for_each_entry(cl, &dev->file_list, link)
+ mei_cl_set_disconnected(cl);
+}
diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h
new file mode 100644
index 0000000..64e318f
--- /dev/null
+++ b/drivers/misc/mei/client.h
@@ -0,0 +1,236 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _MEI_CLIENT_H_
+#define _MEI_CLIENT_H_
+
+#include <linux/types.h>
+#include <linux/poll.h>
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+
+/*
+ * reference counting base function
+ */
+void mei_me_cl_init(struct mei_me_client *me_cl);
+void mei_me_cl_put(struct mei_me_client *me_cl);
+struct mei_me_client *mei_me_cl_get(struct mei_me_client *me_cl);
+
+void mei_me_cl_add(struct mei_device *dev, struct mei_me_client *me_cl);
+void mei_me_cl_del(struct mei_device *dev, struct mei_me_client *me_cl);
+
+struct mei_me_client *mei_me_cl_by_uuid(struct mei_device *dev,
+ const uuid_le *uuid);
+struct mei_me_client *mei_me_cl_by_id(struct mei_device *dev, u8 client_id);
+struct mei_me_client *mei_me_cl_by_uuid_id(struct mei_device *dev,
+ const uuid_le *uuid, u8 client_id);
+void mei_me_cl_rm_by_uuid(struct mei_device *dev, const uuid_le *uuid);
+void mei_me_cl_rm_by_uuid_id(struct mei_device *dev,
+ const uuid_le *uuid, u8 id);
+void mei_me_cl_rm_all(struct mei_device *dev);
+
+/**
+ * mei_me_cl_is_active - check whether me client is active in the fw
+ *
+ * @me_cl: me client
+ *
+ * Return: true if the me client is active in the firmware
+ */
+static inline bool mei_me_cl_is_active(const struct mei_me_client *me_cl)
+{
+ return !list_empty_careful(&me_cl->list);
+}
+
+/**
+ * mei_me_cl_uuid - return me client protocol name (uuid)
+ *
+ * @me_cl: me client
+ *
+ * Return: me client protocol name
+ */
+static inline const uuid_le *mei_me_cl_uuid(const struct mei_me_client *me_cl)
+{
+ return &me_cl->props.protocol_name;
+}
+
+/**
+ * mei_me_cl_ver - return me client protocol version
+ *
+ * @me_cl: me client
+ *
+ * Return: me client protocol version
+ */
+static inline u8 mei_me_cl_ver(const struct mei_me_client *me_cl)
+{
+ return me_cl->props.protocol_version;
+}
+
+/*
+ * MEI IO Functions
+ */
+void mei_io_cb_free(struct mei_cl_cb *priv_cb);
+
+/*
+ * MEI Host Client Functions
+ */
+
+struct mei_cl *mei_cl_allocate(struct mei_device *dev);
+
+int mei_cl_link(struct mei_cl *cl);
+int mei_cl_unlink(struct mei_cl *cl);
+
+struct mei_cl *mei_cl_alloc_linked(struct mei_device *dev);
+
+struct mei_cl_cb *mei_cl_read_cb(const struct mei_cl *cl,
+ const struct file *fp);
+struct mei_cl_cb *mei_cl_alloc_cb(struct mei_cl *cl, size_t length,
+ enum mei_cb_file_ops type,
+ const struct file *fp);
+struct mei_cl_cb *mei_cl_enqueue_ctrl_wr_cb(struct mei_cl *cl, size_t length,
+ enum mei_cb_file_ops type,
+ const struct file *fp);
+int mei_cl_flush_queues(struct mei_cl *cl, const struct file *fp);
+
+/*
+ * MEI input output function prototype
+ */
+
+/**
+ * mei_cl_is_connected - host client is connected
+ *
+ * @cl: host client
+ *
+ * Return: true if the host client is connected
+ */
+static inline bool mei_cl_is_connected(struct mei_cl *cl)
+{
+ return cl->state == MEI_FILE_CONNECTED;
+}
+
+/**
+ * mei_cl_me_id - me client id
+ *
+ * @cl: host client
+ *
+ * Return: me client id or 0 if client is not connected
+ */
+static inline u8 mei_cl_me_id(const struct mei_cl *cl)
+{
+ return cl->me_cl ? cl->me_cl->client_id : 0;
+}
+
+/**
+ * mei_cl_mtu - maximal message that client can send and receive
+ *
+ * @cl: host client
+ *
+ * Return: mtu
+ */
+static inline size_t mei_cl_mtu(const struct mei_cl *cl)
+{
+ return cl->me_cl->props.max_msg_length;
+}
+
+/**
+ * mei_cl_is_fixed_address - check whether the me client uses fixed address
+ *
+ * @cl: host client
+ *
+ * Return: true if the client is connected and it has fixed me address
+ */
+static inline bool mei_cl_is_fixed_address(const struct mei_cl *cl)
+{
+ return cl->me_cl && cl->me_cl->props.fixed_address;
+}
+
+/**
+ * mei_cl_is_single_recv_buf- check whether the me client
+ * uses single receiving buffer
+ *
+ * @cl: host client
+ *
+ * Return: true if single_recv_buf == 1; 0 otherwise
+ */
+static inline bool mei_cl_is_single_recv_buf(const struct mei_cl *cl)
+{
+ return cl->me_cl->props.single_recv_buf;
+}
+
+/**
+ * mei_cl_uuid - client's uuid
+ *
+ * @cl: host client
+ *
+ * Return: return uuid of connected me client
+ */
+static inline const uuid_le *mei_cl_uuid(const struct mei_cl *cl)
+{
+ return mei_me_cl_uuid(cl->me_cl);
+}
+
+/**
+ * mei_cl_host_addr - client's host address
+ *
+ * @cl: host client
+ *
+ * Return: 0 for fixed address client, host address for dynamic client
+ */
+static inline u8 mei_cl_host_addr(const struct mei_cl *cl)
+{
+ return mei_cl_is_fixed_address(cl) ? 0 : cl->host_client_id;
+}
+
+int mei_cl_disconnect(struct mei_cl *cl);
+int mei_cl_irq_disconnect(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct list_head *cmpl_list);
+int mei_cl_connect(struct mei_cl *cl, struct mei_me_client *me_cl,
+ const struct file *file);
+int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct list_head *cmpl_list);
+int mei_cl_read_start(struct mei_cl *cl, size_t length, const struct file *fp);
+ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb);
+int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct list_head *cmpl_list);
+
+void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb);
+
+void mei_host_client_init(struct mei_device *dev);
+
+u8 mei_cl_notify_fop2req(enum mei_cb_file_ops fop);
+enum mei_cb_file_ops mei_cl_notify_req2fop(u8 request);
+int mei_cl_notify_request(struct mei_cl *cl,
+ const struct file *file, u8 request);
+int mei_cl_irq_notify(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct list_head *cmpl_list);
+int mei_cl_notify_get(struct mei_cl *cl, bool block, bool *notify_ev);
+void mei_cl_notify(struct mei_cl *cl);
+
+void mei_cl_all_disconnect(struct mei_device *dev);
+
+#define MEI_CL_FMT "cl:host=%02d me=%02d "
+#define MEI_CL_PRM(cl) (cl)->host_client_id, mei_cl_me_id(cl)
+
+#define cl_dbg(dev, cl, format, arg...) \
+ dev_dbg((dev)->dev, MEI_CL_FMT format, MEI_CL_PRM(cl), ##arg)
+
+#define cl_warn(dev, cl, format, arg...) \
+ dev_warn((dev)->dev, MEI_CL_FMT format, MEI_CL_PRM(cl), ##arg)
+
+#define cl_err(dev, cl, format, arg...) \
+ dev_err((dev)->dev, MEI_CL_FMT format, MEI_CL_PRM(cl), ##arg)
+
+#endif /* _MEI_CLIENT_H_ */
diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c
new file mode 100644
index 0000000..7b5df8f
--- /dev/null
+++ b/drivers/misc/mei/debugfs.c
@@ -0,0 +1,288 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2012-2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/debugfs.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "client.h"
+#include "hw.h"
+
+static ssize_t mei_dbgfs_read_meclients(struct file *fp, char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ struct mei_device *dev = fp->private_data;
+ struct mei_me_client *me_cl;
+ size_t bufsz = 1;
+ char *buf;
+ int i = 0;
+ int pos = 0;
+ int ret;
+
+#define HDR \
+" |id|fix| UUID |con|msg len|sb|refc|\n"
+
+ down_read(&dev->me_clients_rwsem);
+ list_for_each_entry(me_cl, &dev->me_clients, list)
+ bufsz++;
+
+ bufsz *= sizeof(HDR) + 1;
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ up_read(&dev->me_clients_rwsem);
+ return -ENOMEM;
+ }
+
+ pos += scnprintf(buf + pos, bufsz - pos, HDR);
+#undef HDR
+
+ /* if the driver is not enabled the list won't be consistent */
+ if (dev->dev_state != MEI_DEV_ENABLED)
+ goto out;
+
+ list_for_each_entry(me_cl, &dev->me_clients, list) {
+
+ if (mei_me_cl_get(me_cl)) {
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "%2d|%2d|%3d|%pUl|%3d|%7d|%2d|%4d|\n",
+ i++, me_cl->client_id,
+ me_cl->props.fixed_address,
+ &me_cl->props.protocol_name,
+ me_cl->props.max_number_of_connections,
+ me_cl->props.max_msg_length,
+ me_cl->props.single_recv_buf,
+ kref_read(&me_cl->refcnt));
+
+ mei_me_cl_put(me_cl);
+ }
+ }
+
+out:
+ up_read(&dev->me_clients_rwsem);
+ ret = simple_read_from_buffer(ubuf, cnt, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations mei_dbgfs_fops_meclients = {
+ .open = simple_open,
+ .read = mei_dbgfs_read_meclients,
+ .llseek = generic_file_llseek,
+};
+
+static ssize_t mei_dbgfs_read_active(struct file *fp, char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ struct mei_device *dev = fp->private_data;
+ struct mei_cl *cl;
+ size_t bufsz = 1;
+ char *buf;
+ int i = 0;
+ int pos = 0;
+ int ret;
+
+#define HDR " |me|host|state|rd|wr|wrq\n"
+
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&dev->device_lock);
+
+ /*
+ * if the driver is not enabled the list won't be consistent,
+ * we output empty table
+ */
+ if (dev->dev_state == MEI_DEV_ENABLED)
+ list_for_each_entry(cl, &dev->file_list, link)
+ bufsz++;
+
+ bufsz *= sizeof(HDR) + 1;
+
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ mutex_unlock(&dev->device_lock);
+ return -ENOMEM;
+ }
+
+ pos += scnprintf(buf + pos, bufsz - pos, HDR);
+#undef HDR
+
+ /* if the driver is not enabled the list won't be consistent */
+ if (dev->dev_state != MEI_DEV_ENABLED)
+ goto out;
+
+ list_for_each_entry(cl, &dev->file_list, link) {
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "%3d|%2d|%4d|%5d|%2d|%2d|%3u\n",
+ i, mei_cl_me_id(cl), cl->host_client_id, cl->state,
+ !list_empty(&cl->rd_completed), cl->writing_state,
+ cl->tx_cb_queued);
+ i++;
+ }
+out:
+ mutex_unlock(&dev->device_lock);
+ ret = simple_read_from_buffer(ubuf, cnt, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations mei_dbgfs_fops_active = {
+ .open = simple_open,
+ .read = mei_dbgfs_read_active,
+ .llseek = generic_file_llseek,
+};
+
+static ssize_t mei_dbgfs_read_devstate(struct file *fp, char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ struct mei_device *dev = fp->private_data;
+ const size_t bufsz = 1024;
+ char *buf = kzalloc(bufsz, GFP_KERNEL);
+ int pos = 0;
+ int ret;
+
+ if (!buf)
+ return -ENOMEM;
+
+ pos += scnprintf(buf + pos, bufsz - pos, "dev: %s\n",
+ mei_dev_state_str(dev->dev_state));
+ pos += scnprintf(buf + pos, bufsz - pos, "hbm: %s\n",
+ mei_hbm_state_str(dev->hbm_state));
+
+ if (dev->hbm_state >= MEI_HBM_ENUM_CLIENTS &&
+ dev->hbm_state <= MEI_HBM_STARTED) {
+ pos += scnprintf(buf + pos, bufsz - pos, "hbm features:\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "\tPG: %01d\n",
+ dev->hbm_f_pg_supported);
+ pos += scnprintf(buf + pos, bufsz - pos, "\tDC: %01d\n",
+ dev->hbm_f_dc_supported);
+ pos += scnprintf(buf + pos, bufsz - pos, "\tIE: %01d\n",
+ dev->hbm_f_ie_supported);
+ pos += scnprintf(buf + pos, bufsz - pos, "\tDOT: %01d\n",
+ dev->hbm_f_dot_supported);
+ pos += scnprintf(buf + pos, bufsz - pos, "\tEV: %01d\n",
+ dev->hbm_f_ev_supported);
+ pos += scnprintf(buf + pos, bufsz - pos, "\tFA: %01d\n",
+ dev->hbm_f_fa_supported);
+ pos += scnprintf(buf + pos, bufsz - pos, "\tOS: %01d\n",
+ dev->hbm_f_os_supported);
+ pos += scnprintf(buf + pos, bufsz - pos, "\tDR: %01d\n",
+ dev->hbm_f_dr_supported);
+ }
+
+ pos += scnprintf(buf + pos, bufsz - pos, "pg: %s, %s\n",
+ mei_pg_is_enabled(dev) ? "ENABLED" : "DISABLED",
+ mei_pg_state_str(mei_pg_state(dev)));
+ ret = simple_read_from_buffer(ubuf, cnt, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+static const struct file_operations mei_dbgfs_fops_devstate = {
+ .open = simple_open,
+ .read = mei_dbgfs_read_devstate,
+ .llseek = generic_file_llseek,
+};
+
+static ssize_t mei_dbgfs_write_allow_fa(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct mei_device *dev;
+ int ret;
+
+ dev = container_of(file->private_data,
+ struct mei_device, allow_fixed_address);
+
+ ret = debugfs_write_file_bool(file, user_buf, count, ppos);
+ if (ret < 0)
+ return ret;
+ dev->override_fixed_address = true;
+ return ret;
+}
+
+static const struct file_operations mei_dbgfs_fops_allow_fa = {
+ .open = simple_open,
+ .read = debugfs_read_file_bool,
+ .write = mei_dbgfs_write_allow_fa,
+ .llseek = generic_file_llseek,
+};
+
+/**
+ * mei_dbgfs_deregister - Remove the debugfs files and directories
+ *
+ * @dev: the mei device structure
+ */
+void mei_dbgfs_deregister(struct mei_device *dev)
+{
+ if (!dev->dbgfs_dir)
+ return;
+ debugfs_remove_recursive(dev->dbgfs_dir);
+ dev->dbgfs_dir = NULL;
+}
+
+/**
+ * mei_dbgfs_register - Add the debugfs files
+ *
+ * @dev: the mei device structure
+ * @name: the mei device name
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+int mei_dbgfs_register(struct mei_device *dev, const char *name)
+{
+ struct dentry *dir, *f;
+
+ dir = debugfs_create_dir(name, NULL);
+ if (!dir)
+ return -ENOMEM;
+
+ dev->dbgfs_dir = dir;
+
+ f = debugfs_create_file("meclients", S_IRUSR, dir,
+ dev, &mei_dbgfs_fops_meclients);
+ if (!f) {
+ dev_err(dev->dev, "meclients: registration failed\n");
+ goto err;
+ }
+ f = debugfs_create_file("active", S_IRUSR, dir,
+ dev, &mei_dbgfs_fops_active);
+ if (!f) {
+ dev_err(dev->dev, "active: registration failed\n");
+ goto err;
+ }
+ f = debugfs_create_file("devstate", S_IRUSR, dir,
+ dev, &mei_dbgfs_fops_devstate);
+ if (!f) {
+ dev_err(dev->dev, "devstate: registration failed\n");
+ goto err;
+ }
+ f = debugfs_create_file("allow_fixed_address", S_IRUSR | S_IWUSR, dir,
+ &dev->allow_fixed_address,
+ &mei_dbgfs_fops_allow_fa);
+ if (!f) {
+ dev_err(dev->dev, "allow_fixed_address: registration failed\n");
+ goto err;
+ }
+ return 0;
+err:
+ mei_dbgfs_deregister(dev);
+ return -ENODEV;
+}
+
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
new file mode 100644
index 0000000..e56f3e7
--- /dev/null
+++ b/drivers/misc/mei/hbm.c
@@ -0,0 +1,1280 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "hbm.h"
+#include "client.h"
+
+static const char *mei_hbm_status_str(enum mei_hbm_status status)
+{
+#define MEI_HBM_STATUS(status) case MEI_HBMS_##status: return #status
+ switch (status) {
+ MEI_HBM_STATUS(SUCCESS);
+ MEI_HBM_STATUS(CLIENT_NOT_FOUND);
+ MEI_HBM_STATUS(ALREADY_EXISTS);
+ MEI_HBM_STATUS(REJECTED);
+ MEI_HBM_STATUS(INVALID_PARAMETER);
+ MEI_HBM_STATUS(NOT_ALLOWED);
+ MEI_HBM_STATUS(ALREADY_STARTED);
+ MEI_HBM_STATUS(NOT_STARTED);
+ default: return "unknown";
+ }
+#undef MEI_HBM_STATUS
+};
+
+static const char *mei_cl_conn_status_str(enum mei_cl_connect_status status)
+{
+#define MEI_CL_CS(status) case MEI_CL_CONN_##status: return #status
+ switch (status) {
+ MEI_CL_CS(SUCCESS);
+ MEI_CL_CS(NOT_FOUND);
+ MEI_CL_CS(ALREADY_STARTED);
+ MEI_CL_CS(OUT_OF_RESOURCES);
+ MEI_CL_CS(MESSAGE_SMALL);
+ MEI_CL_CS(NOT_ALLOWED);
+ default: return "unknown";
+ }
+#undef MEI_CL_CCS
+}
+
+const char *mei_hbm_state_str(enum mei_hbm_state state)
+{
+#define MEI_HBM_STATE(state) case MEI_HBM_##state: return #state
+ switch (state) {
+ MEI_HBM_STATE(IDLE);
+ MEI_HBM_STATE(STARTING);
+ MEI_HBM_STATE(STARTED);
+ MEI_HBM_STATE(ENUM_CLIENTS);
+ MEI_HBM_STATE(CLIENT_PROPERTIES);
+ MEI_HBM_STATE(STOPPED);
+ default:
+ return "unknown";
+ }
+#undef MEI_HBM_STATE
+}
+
+/**
+ * mei_cl_conn_status_to_errno - convert client connect response
+ * status to error code
+ *
+ * @status: client connect response status
+ *
+ * Return: corresponding error code
+ */
+static int mei_cl_conn_status_to_errno(enum mei_cl_connect_status status)
+{
+ switch (status) {
+ case MEI_CL_CONN_SUCCESS: return 0;
+ case MEI_CL_CONN_NOT_FOUND: return -ENOTTY;
+ case MEI_CL_CONN_ALREADY_STARTED: return -EBUSY;
+ case MEI_CL_CONN_OUT_OF_RESOURCES: return -EBUSY;
+ case MEI_CL_CONN_MESSAGE_SMALL: return -EINVAL;
+ case MEI_CL_CONN_NOT_ALLOWED: return -EBUSY;
+ default: return -EINVAL;
+ }
+}
+
+/**
+ * mei_hbm_write_message - wrapper for sending hbm messages.
+ *
+ * @dev: mei device
+ * @hdr: mei header
+ * @data: payload
+ */
+static inline int mei_hbm_write_message(struct mei_device *dev,
+ struct mei_msg_hdr *hdr,
+ const void *data)
+{
+ return mei_write_message(dev, hdr, sizeof(*hdr), data, hdr->length);
+}
+
+/**
+ * mei_hbm_idle - set hbm to idle state
+ *
+ * @dev: the device structure
+ */
+void mei_hbm_idle(struct mei_device *dev)
+{
+ dev->init_clients_timer = 0;
+ dev->hbm_state = MEI_HBM_IDLE;
+}
+
+/**
+ * mei_hbm_reset - reset hbm counters and book keeping data structurs
+ *
+ * @dev: the device structure
+ */
+void mei_hbm_reset(struct mei_device *dev)
+{
+ mei_me_cl_rm_all(dev);
+
+ mei_hbm_idle(dev);
+}
+
+/**
+ * mei_hbm_hdr - construct hbm header
+ *
+ * @hdr: hbm header
+ * @length: payload length
+ */
+
+static inline void mei_hbm_hdr(struct mei_msg_hdr *hdr, size_t length)
+{
+ hdr->host_addr = 0;
+ hdr->me_addr = 0;
+ hdr->length = length;
+ hdr->msg_complete = 1;
+ hdr->dma_ring = 0;
+ hdr->reserved = 0;
+ hdr->internal = 0;
+}
+
+/**
+ * mei_hbm_cl_hdr - construct client hbm header
+ *
+ * @cl: client
+ * @hbm_cmd: host bus message command
+ * @buf: buffer for cl header
+ * @len: buffer length
+ */
+static inline
+void mei_hbm_cl_hdr(struct mei_cl *cl, u8 hbm_cmd, void *buf, size_t len)
+{
+ struct mei_hbm_cl_cmd *cmd = buf;
+
+ memset(cmd, 0, len);
+
+ cmd->hbm_cmd = hbm_cmd;
+ cmd->host_addr = mei_cl_host_addr(cl);
+ cmd->me_addr = mei_cl_me_id(cl);
+}
+
+/**
+ * mei_hbm_cl_write - write simple hbm client message
+ *
+ * @dev: the device structure
+ * @cl: client
+ * @hbm_cmd: host bus message command
+ * @buf: message buffer
+ * @len: buffer length
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+static inline int mei_hbm_cl_write(struct mei_device *dev, struct mei_cl *cl,
+ u8 hbm_cmd, void *buf, size_t len)
+{
+ struct mei_msg_hdr mei_hdr;
+
+ mei_hbm_hdr(&mei_hdr, len);
+ mei_hbm_cl_hdr(cl, hbm_cmd, buf, len);
+
+ return mei_hbm_write_message(dev, &mei_hdr, buf);
+}
+
+/**
+ * mei_hbm_cl_addr_equal - check if the client's and
+ * the message address match
+ *
+ * @cl: client
+ * @cmd: hbm client message
+ *
+ * Return: true if addresses are the same
+ */
+static inline
+bool mei_hbm_cl_addr_equal(struct mei_cl *cl, struct mei_hbm_cl_cmd *cmd)
+{
+ return mei_cl_host_addr(cl) == cmd->host_addr &&
+ mei_cl_me_id(cl) == cmd->me_addr;
+}
+
+/**
+ * mei_hbm_cl_find_by_cmd - find recipient client
+ *
+ * @dev: the device structure
+ * @buf: a buffer with hbm cl command
+ *
+ * Return: the recipient client or NULL if not found
+ */
+static inline
+struct mei_cl *mei_hbm_cl_find_by_cmd(struct mei_device *dev, void *buf)
+{
+ struct mei_hbm_cl_cmd *cmd = (struct mei_hbm_cl_cmd *)buf;
+ struct mei_cl *cl;
+
+ list_for_each_entry(cl, &dev->file_list, link)
+ if (mei_hbm_cl_addr_equal(cl, cmd))
+ return cl;
+ return NULL;
+}
+
+
+/**
+ * mei_hbm_start_wait - wait for start response message.
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success and < 0 on failure
+ */
+int mei_hbm_start_wait(struct mei_device *dev)
+{
+ int ret;
+
+ if (dev->hbm_state > MEI_HBM_STARTING)
+ return 0;
+
+ mutex_unlock(&dev->device_lock);
+ ret = wait_event_timeout(dev->wait_hbm_start,
+ dev->hbm_state != MEI_HBM_STARTING,
+ mei_secs_to_jiffies(MEI_HBM_TIMEOUT));
+ mutex_lock(&dev->device_lock);
+
+ if (ret == 0 && (dev->hbm_state <= MEI_HBM_STARTING)) {
+ dev->hbm_state = MEI_HBM_IDLE;
+ dev_err(dev->dev, "waiting for mei start failed\n");
+ return -ETIME;
+ }
+ return 0;
+}
+
+/**
+ * mei_hbm_start_req - sends start request message.
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success and < 0 on failure
+ */
+int mei_hbm_start_req(struct mei_device *dev)
+{
+ struct mei_msg_hdr mei_hdr;
+ struct hbm_host_version_request start_req;
+ const size_t len = sizeof(struct hbm_host_version_request);
+ int ret;
+
+ mei_hbm_reset(dev);
+
+ mei_hbm_hdr(&mei_hdr, len);
+
+ /* host start message */
+ memset(&start_req, 0, len);
+ start_req.hbm_cmd = HOST_START_REQ_CMD;
+ start_req.host_version.major_version = HBM_MAJOR_VERSION;
+ start_req.host_version.minor_version = HBM_MINOR_VERSION;
+
+ dev->hbm_state = MEI_HBM_IDLE;
+ ret = mei_hbm_write_message(dev, &mei_hdr, &start_req);
+ if (ret) {
+ dev_err(dev->dev, "version message write failed: ret = %d\n",
+ ret);
+ return ret;
+ }
+
+ dev->hbm_state = MEI_HBM_STARTING;
+ dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+ mei_schedule_stall_timer(dev);
+ return 0;
+}
+
+/**
+ * mei_hbm_enum_clients_req - sends enumeration client request message.
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success and < 0 on failure
+ */
+static int mei_hbm_enum_clients_req(struct mei_device *dev)
+{
+ struct mei_msg_hdr mei_hdr;
+ struct hbm_host_enum_request enum_req;
+ const size_t len = sizeof(struct hbm_host_enum_request);
+ int ret;
+
+ /* enumerate clients */
+ mei_hbm_hdr(&mei_hdr, len);
+
+ memset(&enum_req, 0, len);
+ enum_req.hbm_cmd = HOST_ENUM_REQ_CMD;
+ enum_req.flags |= dev->hbm_f_dc_supported ?
+ MEI_HBM_ENUM_F_ALLOW_ADD : 0;
+ enum_req.flags |= dev->hbm_f_ie_supported ?
+ MEI_HBM_ENUM_F_IMMEDIATE_ENUM : 0;
+
+ ret = mei_hbm_write_message(dev, &mei_hdr, &enum_req);
+ if (ret) {
+ dev_err(dev->dev, "enumeration request write failed: ret = %d.\n",
+ ret);
+ return ret;
+ }
+ dev->hbm_state = MEI_HBM_ENUM_CLIENTS;
+ dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+ mei_schedule_stall_timer(dev);
+ return 0;
+}
+
+/**
+ * mei_hbm_me_cl_add - add new me client to the list
+ *
+ * @dev: the device structure
+ * @res: hbm property response
+ *
+ * Return: 0 on success and -ENOMEM on allocation failure
+ */
+
+static int mei_hbm_me_cl_add(struct mei_device *dev,
+ struct hbm_props_response *res)
+{
+ struct mei_me_client *me_cl;
+ const uuid_le *uuid = &res->client_properties.protocol_name;
+
+ mei_me_cl_rm_by_uuid(dev, uuid);
+
+ me_cl = kzalloc(sizeof(struct mei_me_client), GFP_KERNEL);
+ if (!me_cl)
+ return -ENOMEM;
+
+ mei_me_cl_init(me_cl);
+
+ me_cl->props = res->client_properties;
+ me_cl->client_id = res->me_addr;
+ me_cl->tx_flow_ctrl_creds = 0;
+
+ mei_me_cl_add(dev, me_cl);
+
+ return 0;
+}
+
+/**
+ * mei_hbm_add_cl_resp - send response to fw on client add request
+ *
+ * @dev: the device structure
+ * @addr: me address
+ * @status: response status
+ *
+ * Return: 0 on success and < 0 on failure
+ */
+static int mei_hbm_add_cl_resp(struct mei_device *dev, u8 addr, u8 status)
+{
+ struct mei_msg_hdr mei_hdr;
+ struct hbm_add_client_response resp;
+ const size_t len = sizeof(struct hbm_add_client_response);
+ int ret;
+
+ dev_dbg(dev->dev, "adding client response\n");
+
+ mei_hbm_hdr(&mei_hdr, len);
+
+ memset(&resp, 0, sizeof(struct hbm_add_client_response));
+ resp.hbm_cmd = MEI_HBM_ADD_CLIENT_RES_CMD;
+ resp.me_addr = addr;
+ resp.status = status;
+
+ ret = mei_hbm_write_message(dev, &mei_hdr, &resp);
+ if (ret)
+ dev_err(dev->dev, "add client response write failed: ret = %d\n",
+ ret);
+ return ret;
+}
+
+/**
+ * mei_hbm_fw_add_cl_req - request from the fw to add a client
+ *
+ * @dev: the device structure
+ * @req: add client request
+ *
+ * Return: 0 on success and < 0 on failure
+ */
+static int mei_hbm_fw_add_cl_req(struct mei_device *dev,
+ struct hbm_add_client_request *req)
+{
+ int ret;
+ u8 status = MEI_HBMS_SUCCESS;
+
+ BUILD_BUG_ON(sizeof(struct hbm_add_client_request) !=
+ sizeof(struct hbm_props_response));
+
+ ret = mei_hbm_me_cl_add(dev, (struct hbm_props_response *)req);
+ if (ret)
+ status = !MEI_HBMS_SUCCESS;
+
+ if (dev->dev_state == MEI_DEV_ENABLED)
+ schedule_work(&dev->bus_rescan_work);
+
+ return mei_hbm_add_cl_resp(dev, req->me_addr, status);
+}
+
+/**
+ * mei_hbm_cl_notify_req - send notification request
+ *
+ * @dev: the device structure
+ * @cl: a client to disconnect from
+ * @start: true for start false for stop
+ *
+ * Return: 0 on success and -EIO on write failure
+ */
+int mei_hbm_cl_notify_req(struct mei_device *dev,
+ struct mei_cl *cl, u8 start)
+{
+
+ struct mei_msg_hdr mei_hdr;
+ struct hbm_notification_request req;
+ const size_t len = sizeof(struct hbm_notification_request);
+ int ret;
+
+ mei_hbm_hdr(&mei_hdr, len);
+ mei_hbm_cl_hdr(cl, MEI_HBM_NOTIFY_REQ_CMD, &req, len);
+
+ req.start = start;
+
+ ret = mei_hbm_write_message(dev, &mei_hdr, &req);
+ if (ret)
+ dev_err(dev->dev, "notify request failed: ret = %d\n", ret);
+
+ return ret;
+}
+
+/**
+ * notify_res_to_fop - convert notification response to the proper
+ * notification FOP
+ *
+ * @cmd: client notification start response command
+ *
+ * Return: MEI_FOP_NOTIFY_START or MEI_FOP_NOTIFY_STOP;
+ */
+static inline enum mei_cb_file_ops notify_res_to_fop(struct mei_hbm_cl_cmd *cmd)
+{
+ struct hbm_notification_response *rs =
+ (struct hbm_notification_response *)cmd;
+
+ return mei_cl_notify_req2fop(rs->start);
+}
+
+/**
+ * mei_hbm_cl_notify_start_res - update the client state according
+ * notify start response
+ *
+ * @dev: the device structure
+ * @cl: mei host client
+ * @cmd: client notification start response command
+ */
+static void mei_hbm_cl_notify_start_res(struct mei_device *dev,
+ struct mei_cl *cl,
+ struct mei_hbm_cl_cmd *cmd)
+{
+ struct hbm_notification_response *rs =
+ (struct hbm_notification_response *)cmd;
+
+ cl_dbg(dev, cl, "hbm: notify start response status=%d\n", rs->status);
+
+ if (rs->status == MEI_HBMS_SUCCESS ||
+ rs->status == MEI_HBMS_ALREADY_STARTED) {
+ cl->notify_en = true;
+ cl->status = 0;
+ } else {
+ cl->status = -EINVAL;
+ }
+}
+
+/**
+ * mei_hbm_cl_notify_stop_res - update the client state according
+ * notify stop response
+ *
+ * @dev: the device structure
+ * @cl: mei host client
+ * @cmd: client notification stop response command
+ */
+static void mei_hbm_cl_notify_stop_res(struct mei_device *dev,
+ struct mei_cl *cl,
+ struct mei_hbm_cl_cmd *cmd)
+{
+ struct hbm_notification_response *rs =
+ (struct hbm_notification_response *)cmd;
+
+ cl_dbg(dev, cl, "hbm: notify stop response status=%d\n", rs->status);
+
+ if (rs->status == MEI_HBMS_SUCCESS ||
+ rs->status == MEI_HBMS_NOT_STARTED) {
+ cl->notify_en = false;
+ cl->status = 0;
+ } else {
+ /* TODO: spec is not clear yet about other possible issues */
+ cl->status = -EINVAL;
+ }
+}
+
+/**
+ * mei_hbm_cl_notify - signal notification event
+ *
+ * @dev: the device structure
+ * @cmd: notification client message
+ */
+static void mei_hbm_cl_notify(struct mei_device *dev,
+ struct mei_hbm_cl_cmd *cmd)
+{
+ struct mei_cl *cl;
+
+ cl = mei_hbm_cl_find_by_cmd(dev, cmd);
+ if (cl)
+ mei_cl_notify(cl);
+}
+
+/**
+ * mei_hbm_prop_req - request property for a single client
+ *
+ * @dev: the device structure
+ * @start_idx: client index to start search
+ *
+ * Return: 0 on success and < 0 on failure
+ */
+static int mei_hbm_prop_req(struct mei_device *dev, unsigned long start_idx)
+{
+ struct mei_msg_hdr mei_hdr;
+ struct hbm_props_request prop_req;
+ const size_t len = sizeof(struct hbm_props_request);
+ unsigned long addr;
+ int ret;
+
+ addr = find_next_bit(dev->me_clients_map, MEI_CLIENTS_MAX, start_idx);
+
+ /* We got all client properties */
+ if (addr == MEI_CLIENTS_MAX) {
+ dev->hbm_state = MEI_HBM_STARTED;
+ mei_host_client_init(dev);
+
+ return 0;
+ }
+
+ mei_hbm_hdr(&mei_hdr, len);
+
+ memset(&prop_req, 0, sizeof(struct hbm_props_request));
+
+ prop_req.hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD;
+ prop_req.me_addr = addr;
+
+ ret = mei_hbm_write_message(dev, &mei_hdr, &prop_req);
+ if (ret) {
+ dev_err(dev->dev, "properties request write failed: ret = %d\n",
+ ret);
+ return ret;
+ }
+
+ dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+ mei_schedule_stall_timer(dev);
+
+ return 0;
+}
+
+/**
+ * mei_hbm_pg - sends pg command
+ *
+ * @dev: the device structure
+ * @pg_cmd: the pg command code
+ *
+ * Return: -EIO on write failure
+ * -EOPNOTSUPP if the operation is not supported by the protocol
+ */
+int mei_hbm_pg(struct mei_device *dev, u8 pg_cmd)
+{
+ struct mei_msg_hdr mei_hdr;
+ struct hbm_power_gate req;
+ const size_t len = sizeof(struct hbm_power_gate);
+ int ret;
+
+ if (!dev->hbm_f_pg_supported)
+ return -EOPNOTSUPP;
+
+ mei_hbm_hdr(&mei_hdr, len);
+
+ memset(&req, 0, len);
+ req.hbm_cmd = pg_cmd;
+
+ ret = mei_hbm_write_message(dev, &mei_hdr, &req);
+ if (ret)
+ dev_err(dev->dev, "power gate command write failed.\n");
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mei_hbm_pg);
+
+/**
+ * mei_hbm_stop_req - send stop request message
+ *
+ * @dev: mei device
+ *
+ * Return: -EIO on write failure
+ */
+static int mei_hbm_stop_req(struct mei_device *dev)
+{
+ struct mei_msg_hdr mei_hdr;
+ struct hbm_host_stop_request req;
+ const size_t len = sizeof(struct hbm_host_stop_request);
+
+ mei_hbm_hdr(&mei_hdr, len);
+
+ memset(&req, 0, len);
+ req.hbm_cmd = HOST_STOP_REQ_CMD;
+ req.reason = DRIVER_STOP_REQUEST;
+
+ return mei_hbm_write_message(dev, &mei_hdr, &req);
+}
+
+/**
+ * mei_hbm_cl_flow_control_req - sends flow control request.
+ *
+ * @dev: the device structure
+ * @cl: client info
+ *
+ * Return: -EIO on write failure
+ */
+int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl)
+{
+ struct hbm_flow_control req;
+
+ cl_dbg(dev, cl, "sending flow control\n");
+ return mei_hbm_cl_write(dev, cl, MEI_FLOW_CONTROL_CMD,
+ &req, sizeof(req));
+}
+
+/**
+ * mei_hbm_add_single_tx_flow_ctrl_creds - adds single buffer credentials.
+ *
+ * @dev: the device structure
+ * @fctrl: flow control response bus message
+ *
+ * Return: 0 on success, < 0 otherwise
+ */
+static int mei_hbm_add_single_tx_flow_ctrl_creds(struct mei_device *dev,
+ struct hbm_flow_control *fctrl)
+{
+ struct mei_me_client *me_cl;
+ int rets;
+
+ me_cl = mei_me_cl_by_id(dev, fctrl->me_addr);
+ if (!me_cl) {
+ dev_err(dev->dev, "no such me client %d\n", fctrl->me_addr);
+ return -ENOENT;
+ }
+
+ if (WARN_ON(me_cl->props.single_recv_buf == 0)) {
+ rets = -EINVAL;
+ goto out;
+ }
+
+ me_cl->tx_flow_ctrl_creds++;
+ dev_dbg(dev->dev, "recv flow ctrl msg ME %d (single) creds = %d.\n",
+ fctrl->me_addr, me_cl->tx_flow_ctrl_creds);
+
+ rets = 0;
+out:
+ mei_me_cl_put(me_cl);
+ return rets;
+}
+
+/**
+ * mei_hbm_cl_flow_control_res - flow control response from me
+ *
+ * @dev: the device structure
+ * @fctrl: flow control response bus message
+ */
+static void mei_hbm_cl_tx_flow_ctrl_creds_res(struct mei_device *dev,
+ struct hbm_flow_control *fctrl)
+{
+ struct mei_cl *cl;
+
+ if (!fctrl->host_addr) {
+ /* single receive buffer */
+ mei_hbm_add_single_tx_flow_ctrl_creds(dev, fctrl);
+ return;
+ }
+
+ cl = mei_hbm_cl_find_by_cmd(dev, fctrl);
+ if (cl) {
+ cl->tx_flow_ctrl_creds++;
+ cl_dbg(dev, cl, "flow control creds = %d.\n",
+ cl->tx_flow_ctrl_creds);
+ }
+}
+
+
+/**
+ * mei_hbm_cl_disconnect_req - sends disconnect message to fw.
+ *
+ * @dev: the device structure
+ * @cl: a client to disconnect from
+ *
+ * Return: -EIO on write failure
+ */
+int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl)
+{
+ struct hbm_client_connect_request req;
+
+ return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_REQ_CMD,
+ &req, sizeof(req));
+}
+
+/**
+ * mei_hbm_cl_disconnect_rsp - sends disconnect respose to the FW
+ *
+ * @dev: the device structure
+ * @cl: a client to disconnect from
+ *
+ * Return: -EIO on write failure
+ */
+int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl)
+{
+ struct hbm_client_connect_response resp;
+
+ return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_RES_CMD,
+ &resp, sizeof(resp));
+}
+
+/**
+ * mei_hbm_cl_disconnect_res - update the client state according
+ * disconnect response
+ *
+ * @dev: the device structure
+ * @cl: mei host client
+ * @cmd: disconnect client response host bus message
+ */
+static void mei_hbm_cl_disconnect_res(struct mei_device *dev, struct mei_cl *cl,
+ struct mei_hbm_cl_cmd *cmd)
+{
+ struct hbm_client_connect_response *rs =
+ (struct hbm_client_connect_response *)cmd;
+
+ cl_dbg(dev, cl, "hbm: disconnect response status=%d\n", rs->status);
+
+ if (rs->status == MEI_CL_DISCONN_SUCCESS)
+ cl->state = MEI_FILE_DISCONNECT_REPLY;
+ cl->status = 0;
+}
+
+/**
+ * mei_hbm_cl_connect_req - send connection request to specific me client
+ *
+ * @dev: the device structure
+ * @cl: a client to connect to
+ *
+ * Return: -EIO on write failure
+ */
+int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl)
+{
+ struct hbm_client_connect_request req;
+
+ return mei_hbm_cl_write(dev, cl, CLIENT_CONNECT_REQ_CMD,
+ &req, sizeof(req));
+}
+
+/**
+ * mei_hbm_cl_connect_res - update the client state according
+ * connection response
+ *
+ * @dev: the device structure
+ * @cl: mei host client
+ * @cmd: connect client response host bus message
+ */
+static void mei_hbm_cl_connect_res(struct mei_device *dev, struct mei_cl *cl,
+ struct mei_hbm_cl_cmd *cmd)
+{
+ struct hbm_client_connect_response *rs =
+ (struct hbm_client_connect_response *)cmd;
+
+ cl_dbg(dev, cl, "hbm: connect response status=%s\n",
+ mei_cl_conn_status_str(rs->status));
+
+ if (rs->status == MEI_CL_CONN_SUCCESS)
+ cl->state = MEI_FILE_CONNECTED;
+ else {
+ cl->state = MEI_FILE_DISCONNECT_REPLY;
+ if (rs->status == MEI_CL_CONN_NOT_FOUND) {
+ mei_me_cl_del(dev, cl->me_cl);
+ if (dev->dev_state == MEI_DEV_ENABLED)
+ schedule_work(&dev->bus_rescan_work);
+ }
+ }
+ cl->status = mei_cl_conn_status_to_errno(rs->status);
+}
+
+/**
+ * mei_hbm_cl_res - process hbm response received on behalf
+ * an client
+ *
+ * @dev: the device structure
+ * @rs: hbm client message
+ * @fop_type: file operation type
+ */
+static void mei_hbm_cl_res(struct mei_device *dev,
+ struct mei_hbm_cl_cmd *rs,
+ enum mei_cb_file_ops fop_type)
+{
+ struct mei_cl *cl;
+ struct mei_cl_cb *cb, *next;
+
+ cl = NULL;
+ list_for_each_entry_safe(cb, next, &dev->ctrl_rd_list, list) {
+
+ cl = cb->cl;
+
+ if (cb->fop_type != fop_type)
+ continue;
+
+ if (mei_hbm_cl_addr_equal(cl, rs)) {
+ list_del_init(&cb->list);
+ break;
+ }
+ }
+
+ if (!cl)
+ return;
+
+ switch (fop_type) {
+ case MEI_FOP_CONNECT:
+ mei_hbm_cl_connect_res(dev, cl, rs);
+ break;
+ case MEI_FOP_DISCONNECT:
+ mei_hbm_cl_disconnect_res(dev, cl, rs);
+ break;
+ case MEI_FOP_NOTIFY_START:
+ mei_hbm_cl_notify_start_res(dev, cl, rs);
+ break;
+ case MEI_FOP_NOTIFY_STOP:
+ mei_hbm_cl_notify_stop_res(dev, cl, rs);
+ break;
+ default:
+ return;
+ }
+
+ cl->timer_count = 0;
+ wake_up(&cl->wait);
+}
+
+
+/**
+ * mei_hbm_fw_disconnect_req - disconnect request initiated by ME firmware
+ * host sends disconnect response
+ *
+ * @dev: the device structure.
+ * @disconnect_req: disconnect request bus message from the me
+ *
+ * Return: -ENOMEM on allocation failure
+ */
+static int mei_hbm_fw_disconnect_req(struct mei_device *dev,
+ struct hbm_client_connect_request *disconnect_req)
+{
+ struct mei_cl *cl;
+ struct mei_cl_cb *cb;
+
+ cl = mei_hbm_cl_find_by_cmd(dev, disconnect_req);
+ if (cl) {
+ cl_warn(dev, cl, "fw disconnect request received\n");
+ cl->state = MEI_FILE_DISCONNECTING;
+ cl->timer_count = 0;
+
+ cb = mei_cl_enqueue_ctrl_wr_cb(cl, 0, MEI_FOP_DISCONNECT_RSP,
+ NULL);
+ if (!cb)
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/**
+ * mei_hbm_pg_enter_res - PG enter response received
+ *
+ * @dev: the device structure.
+ *
+ * Return: 0 on success, -EPROTO on state mismatch
+ */
+static int mei_hbm_pg_enter_res(struct mei_device *dev)
+{
+ if (mei_pg_state(dev) != MEI_PG_OFF ||
+ dev->pg_event != MEI_PG_EVENT_WAIT) {
+ dev_err(dev->dev, "hbm: pg entry response: state mismatch [%s, %d]\n",
+ mei_pg_state_str(mei_pg_state(dev)), dev->pg_event);
+ return -EPROTO;
+ }
+
+ dev->pg_event = MEI_PG_EVENT_RECEIVED;
+ wake_up(&dev->wait_pg);
+
+ return 0;
+}
+
+/**
+ * mei_hbm_pg_resume - process with PG resume
+ *
+ * @dev: the device structure.
+ */
+void mei_hbm_pg_resume(struct mei_device *dev)
+{
+ pm_request_resume(dev->dev);
+}
+EXPORT_SYMBOL_GPL(mei_hbm_pg_resume);
+
+/**
+ * mei_hbm_pg_exit_res - PG exit response received
+ *
+ * @dev: the device structure.
+ *
+ * Return: 0 on success, -EPROTO on state mismatch
+ */
+static int mei_hbm_pg_exit_res(struct mei_device *dev)
+{
+ if (mei_pg_state(dev) != MEI_PG_ON ||
+ (dev->pg_event != MEI_PG_EVENT_WAIT &&
+ dev->pg_event != MEI_PG_EVENT_IDLE)) {
+ dev_err(dev->dev, "hbm: pg exit response: state mismatch [%s, %d]\n",
+ mei_pg_state_str(mei_pg_state(dev)), dev->pg_event);
+ return -EPROTO;
+ }
+
+ switch (dev->pg_event) {
+ case MEI_PG_EVENT_WAIT:
+ dev->pg_event = MEI_PG_EVENT_RECEIVED;
+ wake_up(&dev->wait_pg);
+ break;
+ case MEI_PG_EVENT_IDLE:
+ /*
+ * If the driver is not waiting on this then
+ * this is HW initiated exit from PG.
+ * Start runtime pm resume sequence to exit from PG.
+ */
+ dev->pg_event = MEI_PG_EVENT_RECEIVED;
+ mei_hbm_pg_resume(dev);
+ break;
+ default:
+ WARN(1, "hbm: pg exit response: unexpected pg event = %d\n",
+ dev->pg_event);
+ return -EPROTO;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_hbm_config_features - check what hbm features and commands
+ * are supported by the fw
+ *
+ * @dev: the device structure
+ */
+static void mei_hbm_config_features(struct mei_device *dev)
+{
+ /* Power Gating Isolation Support */
+ dev->hbm_f_pg_supported = 0;
+ if (dev->version.major_version > HBM_MAJOR_VERSION_PGI)
+ dev->hbm_f_pg_supported = 1;
+
+ if (dev->version.major_version == HBM_MAJOR_VERSION_PGI &&
+ dev->version.minor_version >= HBM_MINOR_VERSION_PGI)
+ dev->hbm_f_pg_supported = 1;
+
+ if (dev->version.major_version >= HBM_MAJOR_VERSION_DC)
+ dev->hbm_f_dc_supported = 1;
+
+ if (dev->version.major_version >= HBM_MAJOR_VERSION_IE)
+ dev->hbm_f_ie_supported = 1;
+
+ /* disconnect on connect timeout instead of link reset */
+ if (dev->version.major_version >= HBM_MAJOR_VERSION_DOT)
+ dev->hbm_f_dot_supported = 1;
+
+ /* Notification Event Support */
+ if (dev->version.major_version >= HBM_MAJOR_VERSION_EV)
+ dev->hbm_f_ev_supported = 1;
+
+ /* Fixed Address Client Support */
+ if (dev->version.major_version >= HBM_MAJOR_VERSION_FA)
+ dev->hbm_f_fa_supported = 1;
+
+ /* OS ver message Support */
+ if (dev->version.major_version >= HBM_MAJOR_VERSION_OS)
+ dev->hbm_f_os_supported = 1;
+
+ /* DMA Ring Support */
+ if (dev->version.major_version > HBM_MAJOR_VERSION_DR ||
+ (dev->version.major_version == HBM_MAJOR_VERSION_DR &&
+ dev->version.minor_version >= HBM_MINOR_VERSION_DR))
+ dev->hbm_f_dr_supported = 1;
+}
+
+/**
+ * mei_hbm_version_is_supported - checks whether the driver can
+ * support the hbm version of the device
+ *
+ * @dev: the device structure
+ * Return: true if driver can support hbm version of the device
+ */
+bool mei_hbm_version_is_supported(struct mei_device *dev)
+{
+ return (dev->version.major_version < HBM_MAJOR_VERSION) ||
+ (dev->version.major_version == HBM_MAJOR_VERSION &&
+ dev->version.minor_version <= HBM_MINOR_VERSION);
+}
+
+/**
+ * mei_hbm_dispatch - bottom half read routine after ISR to
+ * handle the read bus message cmd processing.
+ *
+ * @dev: the device structure
+ * @hdr: header of bus message
+ *
+ * Return: 0 on success and < 0 on failure
+ */
+int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)
+{
+ struct mei_bus_message *mei_msg;
+ struct hbm_host_version_response *version_res;
+ struct hbm_props_response *props_res;
+ struct hbm_host_enum_response *enum_res;
+ struct hbm_add_client_request *add_cl_req;
+ int ret;
+
+ struct mei_hbm_cl_cmd *cl_cmd;
+ struct hbm_client_connect_request *disconnect_req;
+ struct hbm_flow_control *fctrl;
+
+ /* read the message to our buffer */
+ BUG_ON(hdr->length >= sizeof(dev->rd_msg_buf));
+ mei_read_slots(dev, dev->rd_msg_buf, hdr->length);
+ mei_msg = (struct mei_bus_message *)dev->rd_msg_buf;
+ cl_cmd = (struct mei_hbm_cl_cmd *)mei_msg;
+
+ /* ignore spurious message and prevent reset nesting
+ * hbm is put to idle during system reset
+ */
+ if (dev->hbm_state == MEI_HBM_IDLE) {
+ dev_dbg(dev->dev, "hbm: state is idle ignore spurious messages\n");
+ return 0;
+ }
+
+ switch (mei_msg->hbm_cmd) {
+ case HOST_START_RES_CMD:
+ dev_dbg(dev->dev, "hbm: start: response message received.\n");
+
+ dev->init_clients_timer = 0;
+
+ version_res = (struct hbm_host_version_response *)mei_msg;
+
+ dev_dbg(dev->dev, "HBM VERSION: DRIVER=%02d:%02d DEVICE=%02d:%02d\n",
+ HBM_MAJOR_VERSION, HBM_MINOR_VERSION,
+ version_res->me_max_version.major_version,
+ version_res->me_max_version.minor_version);
+
+ if (version_res->host_version_supported) {
+ dev->version.major_version = HBM_MAJOR_VERSION;
+ dev->version.minor_version = HBM_MINOR_VERSION;
+ } else {
+ dev->version.major_version =
+ version_res->me_max_version.major_version;
+ dev->version.minor_version =
+ version_res->me_max_version.minor_version;
+ }
+
+ if (!mei_hbm_version_is_supported(dev)) {
+ dev_warn(dev->dev, "hbm: start: version mismatch - stopping the driver.\n");
+
+ dev->hbm_state = MEI_HBM_STOPPED;
+ if (mei_hbm_stop_req(dev)) {
+ dev_err(dev->dev, "hbm: start: failed to send stop request\n");
+ return -EIO;
+ }
+ break;
+ }
+
+ mei_hbm_config_features(dev);
+
+ if (dev->dev_state != MEI_DEV_INIT_CLIENTS ||
+ dev->hbm_state != MEI_HBM_STARTING) {
+ dev_err(dev->dev, "hbm: start: state mismatch, [%d, %d]\n",
+ dev->dev_state, dev->hbm_state);
+ return -EPROTO;
+ }
+
+ if (mei_hbm_enum_clients_req(dev)) {
+ dev_err(dev->dev, "hbm: start: failed to send enumeration request\n");
+ return -EIO;
+ }
+
+ wake_up(&dev->wait_hbm_start);
+ break;
+
+ case CLIENT_CONNECT_RES_CMD:
+ dev_dbg(dev->dev, "hbm: client connect response: message received.\n");
+ mei_hbm_cl_res(dev, cl_cmd, MEI_FOP_CONNECT);
+ break;
+
+ case CLIENT_DISCONNECT_RES_CMD:
+ dev_dbg(dev->dev, "hbm: client disconnect response: message received.\n");
+ mei_hbm_cl_res(dev, cl_cmd, MEI_FOP_DISCONNECT);
+ break;
+
+ case MEI_FLOW_CONTROL_CMD:
+ dev_dbg(dev->dev, "hbm: client flow control response: message received.\n");
+
+ fctrl = (struct hbm_flow_control *)mei_msg;
+ mei_hbm_cl_tx_flow_ctrl_creds_res(dev, fctrl);
+ break;
+
+ case MEI_PG_ISOLATION_ENTRY_RES_CMD:
+ dev_dbg(dev->dev, "hbm: power gate isolation entry response received\n");
+ ret = mei_hbm_pg_enter_res(dev);
+ if (ret)
+ return ret;
+ break;
+
+ case MEI_PG_ISOLATION_EXIT_REQ_CMD:
+ dev_dbg(dev->dev, "hbm: power gate isolation exit request received\n");
+ ret = mei_hbm_pg_exit_res(dev);
+ if (ret)
+ return ret;
+ break;
+
+ case HOST_CLIENT_PROPERTIES_RES_CMD:
+ dev_dbg(dev->dev, "hbm: properties response: message received.\n");
+
+ dev->init_clients_timer = 0;
+
+ if (dev->dev_state != MEI_DEV_INIT_CLIENTS ||
+ dev->hbm_state != MEI_HBM_CLIENT_PROPERTIES) {
+ dev_err(dev->dev, "hbm: properties response: state mismatch, [%d, %d]\n",
+ dev->dev_state, dev->hbm_state);
+ return -EPROTO;
+ }
+
+ props_res = (struct hbm_props_response *)mei_msg;
+
+ if (props_res->status == MEI_HBMS_CLIENT_NOT_FOUND) {
+ dev_dbg(dev->dev, "hbm: properties response: %d CLIENT_NOT_FOUND\n",
+ props_res->me_addr);
+ } else if (props_res->status) {
+ dev_err(dev->dev, "hbm: properties response: wrong status = %d %s\n",
+ props_res->status,
+ mei_hbm_status_str(props_res->status));
+ return -EPROTO;
+ } else {
+ mei_hbm_me_cl_add(dev, props_res);
+ }
+
+ /* request property for the next client */
+ if (mei_hbm_prop_req(dev, props_res->me_addr + 1))
+ return -EIO;
+
+ break;
+
+ case HOST_ENUM_RES_CMD:
+ dev_dbg(dev->dev, "hbm: enumeration response: message received\n");
+
+ dev->init_clients_timer = 0;
+
+ enum_res = (struct hbm_host_enum_response *) mei_msg;
+ BUILD_BUG_ON(sizeof(dev->me_clients_map)
+ < sizeof(enum_res->valid_addresses));
+ memcpy(dev->me_clients_map, enum_res->valid_addresses,
+ sizeof(enum_res->valid_addresses));
+
+ if (dev->dev_state != MEI_DEV_INIT_CLIENTS ||
+ dev->hbm_state != MEI_HBM_ENUM_CLIENTS) {
+ dev_err(dev->dev, "hbm: enumeration response: state mismatch, [%d, %d]\n",
+ dev->dev_state, dev->hbm_state);
+ return -EPROTO;
+ }
+
+ dev->hbm_state = MEI_HBM_CLIENT_PROPERTIES;
+
+ /* first property request */
+ if (mei_hbm_prop_req(dev, 0))
+ return -EIO;
+
+ break;
+
+ case HOST_STOP_RES_CMD:
+ dev_dbg(dev->dev, "hbm: stop response: message received\n");
+
+ dev->init_clients_timer = 0;
+
+ if (dev->hbm_state != MEI_HBM_STOPPED) {
+ dev_err(dev->dev, "hbm: stop response: state mismatch, [%d, %d]\n",
+ dev->dev_state, dev->hbm_state);
+ return -EPROTO;
+ }
+
+ dev->dev_state = MEI_DEV_POWER_DOWN;
+ dev_info(dev->dev, "hbm: stop response: resetting.\n");
+ /* force the reset */
+ return -EPROTO;
+ break;
+
+ case CLIENT_DISCONNECT_REQ_CMD:
+ dev_dbg(dev->dev, "hbm: disconnect request: message received\n");
+
+ disconnect_req = (struct hbm_client_connect_request *)mei_msg;
+ mei_hbm_fw_disconnect_req(dev, disconnect_req);
+ break;
+
+ case ME_STOP_REQ_CMD:
+ dev_dbg(dev->dev, "hbm: stop request: message received\n");
+ dev->hbm_state = MEI_HBM_STOPPED;
+ if (mei_hbm_stop_req(dev)) {
+ dev_err(dev->dev, "hbm: stop request: failed to send stop request\n");
+ return -EIO;
+ }
+ break;
+
+ case MEI_HBM_ADD_CLIENT_REQ_CMD:
+ dev_dbg(dev->dev, "hbm: add client request received\n");
+ /*
+ * after the host receives the enum_resp
+ * message clients may be added or removed
+ */
+ if (dev->hbm_state <= MEI_HBM_ENUM_CLIENTS ||
+ dev->hbm_state >= MEI_HBM_STOPPED) {
+ dev_err(dev->dev, "hbm: add client: state mismatch, [%d, %d]\n",
+ dev->dev_state, dev->hbm_state);
+ return -EPROTO;
+ }
+ add_cl_req = (struct hbm_add_client_request *)mei_msg;
+ ret = mei_hbm_fw_add_cl_req(dev, add_cl_req);
+ if (ret) {
+ dev_err(dev->dev, "hbm: add client: failed to send response %d\n",
+ ret);
+ return -EIO;
+ }
+ dev_dbg(dev->dev, "hbm: add client request processed\n");
+ break;
+
+ case MEI_HBM_NOTIFY_RES_CMD:
+ dev_dbg(dev->dev, "hbm: notify response received\n");
+ mei_hbm_cl_res(dev, cl_cmd, notify_res_to_fop(cl_cmd));
+ break;
+
+ case MEI_HBM_NOTIFICATION_CMD:
+ dev_dbg(dev->dev, "hbm: notification\n");
+ mei_hbm_cl_notify(dev, cl_cmd);
+ break;
+
+ default:
+ BUG();
+ break;
+
+ }
+ return 0;
+}
+
diff --git a/drivers/misc/mei/hbm.h b/drivers/misc/mei/hbm.h
new file mode 100644
index 0000000..a2025a5
--- /dev/null
+++ b/drivers/misc/mei/hbm.h
@@ -0,0 +1,62 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _MEI_HBM_H_
+#define _MEI_HBM_H_
+
+struct mei_device;
+struct mei_msg_hdr;
+struct mei_cl;
+
+/**
+ * enum mei_hbm_state - host bus message protocol state
+ *
+ * @MEI_HBM_IDLE : protocol not started
+ * @MEI_HBM_STARTING : start request message was sent
+ * @MEI_HBM_ENUM_CLIENTS : enumeration request was sent
+ * @MEI_HBM_CLIENT_PROPERTIES : acquiring clients properties
+ * @MEI_HBM_STARTED : enumeration was completed
+ * @MEI_HBM_STOPPED : stopping exchange
+ */
+enum mei_hbm_state {
+ MEI_HBM_IDLE = 0,
+ MEI_HBM_STARTING,
+ MEI_HBM_ENUM_CLIENTS,
+ MEI_HBM_CLIENT_PROPERTIES,
+ MEI_HBM_STARTED,
+ MEI_HBM_STOPPED,
+};
+
+const char *mei_hbm_state_str(enum mei_hbm_state state);
+
+int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr);
+
+void mei_hbm_idle(struct mei_device *dev);
+void mei_hbm_reset(struct mei_device *dev);
+int mei_hbm_start_req(struct mei_device *dev);
+int mei_hbm_start_wait(struct mei_device *dev);
+int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl);
+int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl);
+int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl);
+int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl);
+bool mei_hbm_version_is_supported(struct mei_device *dev);
+int mei_hbm_pg(struct mei_device *dev, u8 pg_cmd);
+void mei_hbm_pg_resume(struct mei_device *dev);
+int mei_hbm_cl_notify_req(struct mei_device *dev,
+ struct mei_cl *cl, u8 request);
+
+#endif /* _MEI_HBM_H_ */
+
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
new file mode 100644
index 0000000..e4b10b2
--- /dev/null
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -0,0 +1,225 @@
+/******************************************************************************
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Intel MEI Interface Header
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Corporation.
+ * linux-mei@linux.intel.com
+ * http://www.intel.com
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef _MEI_HW_MEI_REGS_H_
+#define _MEI_HW_MEI_REGS_H_
+
+/*
+ * MEI device IDs
+ */
+#define MEI_DEV_ID_82946GZ 0x2974 /* 82946GZ/GL */
+#define MEI_DEV_ID_82G35 0x2984 /* 82G35 Express */
+#define MEI_DEV_ID_82Q965 0x2994 /* 82Q963/Q965 */
+#define MEI_DEV_ID_82G965 0x29A4 /* 82P965/G965 */
+
+#define MEI_DEV_ID_82GM965 0x2A04 /* Mobile PM965/GM965 */
+#define MEI_DEV_ID_82GME965 0x2A14 /* Mobile GME965/GLE960 */
+
+#define MEI_DEV_ID_ICH9_82Q35 0x29B4 /* 82Q35 Express */
+#define MEI_DEV_ID_ICH9_82G33 0x29C4 /* 82G33/G31/P35/P31 Express */
+#define MEI_DEV_ID_ICH9_82Q33 0x29D4 /* 82Q33 Express */
+#define MEI_DEV_ID_ICH9_82X38 0x29E4 /* 82X38/X48 Express */
+#define MEI_DEV_ID_ICH9_3200 0x29F4 /* 3200/3210 Server */
+
+#define MEI_DEV_ID_ICH9_6 0x28B4 /* Bearlake */
+#define MEI_DEV_ID_ICH9_7 0x28C4 /* Bearlake */
+#define MEI_DEV_ID_ICH9_8 0x28D4 /* Bearlake */
+#define MEI_DEV_ID_ICH9_9 0x28E4 /* Bearlake */
+#define MEI_DEV_ID_ICH9_10 0x28F4 /* Bearlake */
+
+#define MEI_DEV_ID_ICH9M_1 0x2A44 /* Cantiga */
+#define MEI_DEV_ID_ICH9M_2 0x2A54 /* Cantiga */
+#define MEI_DEV_ID_ICH9M_3 0x2A64 /* Cantiga */
+#define MEI_DEV_ID_ICH9M_4 0x2A74 /* Cantiga */
+
+#define MEI_DEV_ID_ICH10_1 0x2E04 /* Eaglelake */
+#define MEI_DEV_ID_ICH10_2 0x2E14 /* Eaglelake */
+#define MEI_DEV_ID_ICH10_3 0x2E24 /* Eaglelake */
+#define MEI_DEV_ID_ICH10_4 0x2E34 /* Eaglelake */
+
+#define MEI_DEV_ID_IBXPK_1 0x3B64 /* Calpella */
+#define MEI_DEV_ID_IBXPK_2 0x3B65 /* Calpella */
+
+#define MEI_DEV_ID_CPT_1 0x1C3A /* Couger Point */
+#define MEI_DEV_ID_PBG_1 0x1D3A /* C600/X79 Patsburg */
+
+#define MEI_DEV_ID_PPT_1 0x1E3A /* Panther Point */
+#define MEI_DEV_ID_PPT_2 0x1CBA /* Panther Point */
+#define MEI_DEV_ID_PPT_3 0x1DBA /* Panther Point */
+
+#define MEI_DEV_ID_LPT_H 0x8C3A /* Lynx Point H */
+#define MEI_DEV_ID_LPT_W 0x8D3A /* Lynx Point - Wellsburg */
+#define MEI_DEV_ID_LPT_LP 0x9C3A /* Lynx Point LP */
+#define MEI_DEV_ID_LPT_HR 0x8CBA /* Lynx Point H Refresh */
+
+#define MEI_DEV_ID_WPT_LP 0x9CBA /* Wildcat Point LP */
+#define MEI_DEV_ID_WPT_LP_2 0x9CBB /* Wildcat Point LP 2 */
+
+#define MEI_DEV_ID_SPT 0x9D3A /* Sunrise Point */
+#define MEI_DEV_ID_SPT_2 0x9D3B /* Sunrise Point 2 */
+#define MEI_DEV_ID_SPT_H 0xA13A /* Sunrise Point H */
+#define MEI_DEV_ID_SPT_H_2 0xA13B /* Sunrise Point H 2 */
+
+#define MEI_DEV_ID_LBG 0xA1BA /* Lewisburg (SPT) */
+
+#define MEI_DEV_ID_BXT_M 0x1A9A /* Broxton M */
+#define MEI_DEV_ID_APL_I 0x5A9A /* Apollo Lake I */
+
+#define MEI_DEV_ID_GLK 0x319A /* Gemini Lake */
+
+#define MEI_DEV_ID_KBP 0xA2BA /* Kaby Point */
+#define MEI_DEV_ID_KBP_2 0xA2BB /* Kaby Point 2 */
+
+#define MEI_DEV_ID_CNP_LP 0x9DE0 /* Cannon Point LP */
+#define MEI_DEV_ID_CNP_LP_4 0x9DE4 /* Cannon Point LP 4 (iTouch) */
+#define MEI_DEV_ID_CNP_H 0xA360 /* Cannon Point H */
+#define MEI_DEV_ID_CNP_H_4 0xA364 /* Cannon Point H 4 (iTouch) */
+
+/*
+ * MEI HW Section
+ */
+
+/* Host Firmware Status Registers in PCI Config Space */
+#define PCI_CFG_HFS_1 0x40
+# define PCI_CFG_HFS_1_D0I3_MSK 0x80000000
+#define PCI_CFG_HFS_2 0x48
+#define PCI_CFG_HFS_3 0x60
+#define PCI_CFG_HFS_4 0x64
+#define PCI_CFG_HFS_5 0x68
+#define PCI_CFG_HFS_6 0x6C
+
+/* MEI registers */
+/* H_CB_WW - Host Circular Buffer (CB) Write Window register */
+#define H_CB_WW 0
+/* H_CSR - Host Control Status register */
+#define H_CSR 4
+/* ME_CB_RW - ME Circular Buffer Read Window register (read only) */
+#define ME_CB_RW 8
+/* ME_CSR_HA - ME Control Status Host Access register (read only) */
+#define ME_CSR_HA 0xC
+/* H_HGC_CSR - PGI register */
+#define H_HPG_CSR 0x10
+/* H_D0I3C - D0I3 Control */
+#define H_D0I3C 0x800
+
+/* register bits of H_CSR (Host Control Status register) */
+/* Host Circular Buffer Depth - maximum number of 32-bit entries in CB */
+#define H_CBD 0xFF000000
+/* Host Circular Buffer Write Pointer */
+#define H_CBWP 0x00FF0000
+/* Host Circular Buffer Read Pointer */
+#define H_CBRP 0x0000FF00
+/* Host Reset */
+#define H_RST 0x00000010
+/* Host Ready */
+#define H_RDY 0x00000008
+/* Host Interrupt Generate */
+#define H_IG 0x00000004
+/* Host Interrupt Status */
+#define H_IS 0x00000002
+/* Host Interrupt Enable */
+#define H_IE 0x00000001
+/* Host D0I3 Interrupt Enable */
+#define H_D0I3C_IE 0x00000020
+/* Host D0I3 Interrupt Status */
+#define H_D0I3C_IS 0x00000040
+
+/* H_CSR masks */
+#define H_CSR_IE_MASK (H_IE | H_D0I3C_IE)
+#define H_CSR_IS_MASK (H_IS | H_D0I3C_IS)
+
+/* register bits of ME_CSR_HA (ME Control Status Host Access register) */
+/* ME CB (Circular Buffer) Depth HRA (Host Read Access) - host read only
+access to ME_CBD */
+#define ME_CBD_HRA 0xFF000000
+/* ME CB Write Pointer HRA - host read only access to ME_CBWP */
+#define ME_CBWP_HRA 0x00FF0000
+/* ME CB Read Pointer HRA - host read only access to ME_CBRP */
+#define ME_CBRP_HRA 0x0000FF00
+/* ME Power Gate Isolation Capability HRA - host ready only access */
+#define ME_PGIC_HRA 0x00000040
+/* ME Reset HRA - host read only access to ME_RST */
+#define ME_RST_HRA 0x00000010
+/* ME Ready HRA - host read only access to ME_RDY */
+#define ME_RDY_HRA 0x00000008
+/* ME Interrupt Generate HRA - host read only access to ME_IG */
+#define ME_IG_HRA 0x00000004
+/* ME Interrupt Status HRA - host read only access to ME_IS */
+#define ME_IS_HRA 0x00000002
+/* ME Interrupt Enable HRA - host read only access to ME_IE */
+#define ME_IE_HRA 0x00000001
+
+
+/* H_HPG_CSR register bits */
+#define H_HPG_CSR_PGIHEXR 0x00000001
+#define H_HPG_CSR_PGI 0x00000002
+
+/* H_D0I3C register bits */
+#define H_D0I3C_CIP 0x00000001
+#define H_D0I3C_IR 0x00000002
+#define H_D0I3C_I3 0x00000004
+#define H_D0I3C_RR 0x00000008
+
+#endif /* _MEI_HW_MEI_REGS_H_ */
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
new file mode 100644
index 0000000..0759c3a
--- /dev/null
+++ b/drivers/misc/mei/hw-me.c
@@ -0,0 +1,1485 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/pci.h>
+
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/sizes.h>
+
+#include "mei_dev.h"
+#include "hbm.h"
+
+#include "hw-me.h"
+#include "hw-me-regs.h"
+
+#include "mei-trace.h"
+
+/**
+ * mei_me_reg_read - Reads 32bit data from the mei device
+ *
+ * @hw: the me hardware structure
+ * @offset: offset from which to read the data
+ *
+ * Return: register value (u32)
+ */
+static inline u32 mei_me_reg_read(const struct mei_me_hw *hw,
+ unsigned long offset)
+{
+ return ioread32(hw->mem_addr + offset);
+}
+
+
+/**
+ * mei_me_reg_write - Writes 32bit data to the mei device
+ *
+ * @hw: the me hardware structure
+ * @offset: offset from which to write the data
+ * @value: register value to write (u32)
+ */
+static inline void mei_me_reg_write(const struct mei_me_hw *hw,
+ unsigned long offset, u32 value)
+{
+ iowrite32(value, hw->mem_addr + offset);
+}
+
+/**
+ * mei_me_mecbrw_read - Reads 32bit data from ME circular buffer
+ * read window register
+ *
+ * @dev: the device structure
+ *
+ * Return: ME_CB_RW register value (u32)
+ */
+static inline u32 mei_me_mecbrw_read(const struct mei_device *dev)
+{
+ return mei_me_reg_read(to_me_hw(dev), ME_CB_RW);
+}
+
+/**
+ * mei_me_hcbww_write - write 32bit data to the host circular buffer
+ *
+ * @dev: the device structure
+ * @data: 32bit data to be written to the host circular buffer
+ */
+static inline void mei_me_hcbww_write(struct mei_device *dev, u32 data)
+{
+ mei_me_reg_write(to_me_hw(dev), H_CB_WW, data);
+}
+
+/**
+ * mei_me_mecsr_read - Reads 32bit data from the ME CSR
+ *
+ * @dev: the device structure
+ *
+ * Return: ME_CSR_HA register value (u32)
+ */
+static inline u32 mei_me_mecsr_read(const struct mei_device *dev)
+{
+ u32 reg;
+
+ reg = mei_me_reg_read(to_me_hw(dev), ME_CSR_HA);
+ trace_mei_reg_read(dev->dev, "ME_CSR_HA", ME_CSR_HA, reg);
+
+ return reg;
+}
+
+/**
+ * mei_hcsr_read - Reads 32bit data from the host CSR
+ *
+ * @dev: the device structure
+ *
+ * Return: H_CSR register value (u32)
+ */
+static inline u32 mei_hcsr_read(const struct mei_device *dev)
+{
+ u32 reg;
+
+ reg = mei_me_reg_read(to_me_hw(dev), H_CSR);
+ trace_mei_reg_read(dev->dev, "H_CSR", H_CSR, reg);
+
+ return reg;
+}
+
+/**
+ * mei_hcsr_write - writes H_CSR register to the mei device
+ *
+ * @dev: the device structure
+ * @reg: new register value
+ */
+static inline void mei_hcsr_write(struct mei_device *dev, u32 reg)
+{
+ trace_mei_reg_write(dev->dev, "H_CSR", H_CSR, reg);
+ mei_me_reg_write(to_me_hw(dev), H_CSR, reg);
+}
+
+/**
+ * mei_hcsr_set - writes H_CSR register to the mei device,
+ * and ignores the H_IS bit for it is write-one-to-zero.
+ *
+ * @dev: the device structure
+ * @reg: new register value
+ */
+static inline void mei_hcsr_set(struct mei_device *dev, u32 reg)
+{
+ reg &= ~H_CSR_IS_MASK;
+ mei_hcsr_write(dev, reg);
+}
+
+/**
+ * mei_hcsr_set_hig - set host interrupt (set H_IG)
+ *
+ * @dev: the device structure
+ */
+static inline void mei_hcsr_set_hig(struct mei_device *dev)
+{
+ u32 hcsr;
+
+ hcsr = mei_hcsr_read(dev) | H_IG;
+ mei_hcsr_set(dev, hcsr);
+}
+
+/**
+ * mei_me_d0i3c_read - Reads 32bit data from the D0I3C register
+ *
+ * @dev: the device structure
+ *
+ * Return: H_D0I3C register value (u32)
+ */
+static inline u32 mei_me_d0i3c_read(const struct mei_device *dev)
+{
+ u32 reg;
+
+ reg = mei_me_reg_read(to_me_hw(dev), H_D0I3C);
+ trace_mei_reg_read(dev->dev, "H_D0I3C", H_D0I3C, reg);
+
+ return reg;
+}
+
+/**
+ * mei_me_d0i3c_write - writes H_D0I3C register to device
+ *
+ * @dev: the device structure
+ * @reg: new register value
+ */
+static inline void mei_me_d0i3c_write(struct mei_device *dev, u32 reg)
+{
+ trace_mei_reg_write(dev->dev, "H_D0I3C", H_D0I3C, reg);
+ mei_me_reg_write(to_me_hw(dev), H_D0I3C, reg);
+}
+
+/**
+ * mei_me_fw_status - read fw status register from pci config space
+ *
+ * @dev: mei device
+ * @fw_status: fw status register values
+ *
+ * Return: 0 on success, error otherwise
+ */
+static int mei_me_fw_status(struct mei_device *dev,
+ struct mei_fw_status *fw_status)
+{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+ struct mei_me_hw *hw = to_me_hw(dev);
+ const struct mei_fw_status *fw_src = &hw->cfg->fw_status;
+ int ret;
+ int i;
+
+ if (!fw_status)
+ return -EINVAL;
+
+ fw_status->count = fw_src->count;
+ for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) {
+ ret = pci_read_config_dword(pdev, fw_src->status[i],
+ &fw_status->status[i]);
+ trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HSF_X",
+ fw_src->status[i],
+ fw_status->status[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_me_hw_config - configure hw dependent settings
+ *
+ * @dev: mei device
+ */
+static void mei_me_hw_config(struct mei_device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 hcsr, reg;
+
+ /* Doesn't change in runtime */
+ hcsr = mei_hcsr_read(dev);
+ hw->hbuf_depth = (hcsr & H_CBD) >> 24;
+
+ reg = 0;
+ pci_read_config_dword(pdev, PCI_CFG_HFS_1, ®);
+ trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg);
+ hw->d0i3_supported =
+ ((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK);
+
+ hw->pg_state = MEI_PG_OFF;
+ if (hw->d0i3_supported) {
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3)
+ hw->pg_state = MEI_PG_ON;
+ }
+}
+
+/**
+ * mei_me_pg_state - translate internal pg state
+ * to the mei power gating state
+ *
+ * @dev: mei device
+ *
+ * Return: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise
+ */
+static inline enum mei_pg_state mei_me_pg_state(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ return hw->pg_state;
+}
+
+static inline u32 me_intr_src(u32 hcsr)
+{
+ return hcsr & H_CSR_IS_MASK;
+}
+
+/**
+ * me_intr_disable - disables mei device interrupts
+ * using supplied hcsr register value.
+ *
+ * @dev: the device structure
+ * @hcsr: supplied hcsr register value
+ */
+static inline void me_intr_disable(struct mei_device *dev, u32 hcsr)
+{
+ hcsr &= ~H_CSR_IE_MASK;
+ mei_hcsr_set(dev, hcsr);
+}
+
+/**
+ * mei_me_intr_clear - clear and stop interrupts
+ *
+ * @dev: the device structure
+ * @hcsr: supplied hcsr register value
+ */
+static inline void me_intr_clear(struct mei_device *dev, u32 hcsr)
+{
+ if (me_intr_src(hcsr))
+ mei_hcsr_write(dev, hcsr);
+}
+
+/**
+ * mei_me_intr_clear - clear and stop interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_me_intr_clear(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ me_intr_clear(dev, hcsr);
+}
+/**
+ * mei_me_intr_enable - enables mei device interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_me_intr_enable(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ hcsr |= H_CSR_IE_MASK;
+ mei_hcsr_set(dev, hcsr);
+}
+
+/**
+ * mei_me_intr_disable - disables mei device interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_me_intr_disable(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ me_intr_disable(dev, hcsr);
+}
+
+/**
+ * mei_me_synchronize_irq - wait for pending IRQ handlers
+ *
+ * @dev: the device structure
+ */
+static void mei_me_synchronize_irq(struct mei_device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+ synchronize_irq(pdev->irq);
+}
+
+/**
+ * mei_me_hw_reset_release - release device from the reset
+ *
+ * @dev: the device structure
+ */
+static void mei_me_hw_reset_release(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ hcsr |= H_IG;
+ hcsr &= ~H_RST;
+ mei_hcsr_set(dev, hcsr);
+
+ /* complete this write before we set host ready on another CPU */
+ mmiowb();
+}
+
+/**
+ * mei_me_host_set_ready - enable device
+ *
+ * @dev: mei device
+ */
+static void mei_me_host_set_ready(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ hcsr |= H_CSR_IE_MASK | H_IG | H_RDY;
+ mei_hcsr_set(dev, hcsr);
+}
+
+/**
+ * mei_me_host_is_ready - check whether the host has turned ready
+ *
+ * @dev: mei device
+ * Return: bool
+ */
+static bool mei_me_host_is_ready(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ return (hcsr & H_RDY) == H_RDY;
+}
+
+/**
+ * mei_me_hw_is_ready - check whether the me(hw) has turned ready
+ *
+ * @dev: mei device
+ * Return: bool
+ */
+static bool mei_me_hw_is_ready(struct mei_device *dev)
+{
+ u32 mecsr = mei_me_mecsr_read(dev);
+
+ return (mecsr & ME_RDY_HRA) == ME_RDY_HRA;
+}
+
+/**
+ * mei_me_hw_is_resetting - check whether the me(hw) is in reset
+ *
+ * @dev: mei device
+ * Return: bool
+ */
+static bool mei_me_hw_is_resetting(struct mei_device *dev)
+{
+ u32 mecsr = mei_me_mecsr_read(dev);
+
+ return (mecsr & ME_RST_HRA) == ME_RST_HRA;
+}
+
+/**
+ * mei_me_hw_ready_wait - wait until the me(hw) has turned ready
+ * or timeout is reached
+ *
+ * @dev: mei device
+ * Return: 0 on success, error otherwise
+ */
+static int mei_me_hw_ready_wait(struct mei_device *dev)
+{
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_hw_ready,
+ dev->recvd_hw_ready,
+ mei_secs_to_jiffies(MEI_HW_READY_TIMEOUT));
+ mutex_lock(&dev->device_lock);
+ if (!dev->recvd_hw_ready) {
+ dev_err(dev->dev, "wait hw ready failed\n");
+ return -ETIME;
+ }
+
+ mei_me_hw_reset_release(dev);
+ dev->recvd_hw_ready = false;
+ return 0;
+}
+
+/**
+ * mei_me_hw_start - hw start routine
+ *
+ * @dev: mei device
+ * Return: 0 on success, error otherwise
+ */
+static int mei_me_hw_start(struct mei_device *dev)
+{
+ int ret = mei_me_hw_ready_wait(dev);
+
+ if (ret)
+ return ret;
+ dev_dbg(dev->dev, "hw is ready\n");
+
+ mei_me_host_set_ready(dev);
+ return ret;
+}
+
+
+/**
+ * mei_hbuf_filled_slots - gets number of device filled buffer slots
+ *
+ * @dev: the device structure
+ *
+ * Return: number of filled slots
+ */
+static unsigned char mei_hbuf_filled_slots(struct mei_device *dev)
+{
+ u32 hcsr;
+ char read_ptr, write_ptr;
+
+ hcsr = mei_hcsr_read(dev);
+
+ read_ptr = (char) ((hcsr & H_CBRP) >> 8);
+ write_ptr = (char) ((hcsr & H_CBWP) >> 16);
+
+ return (unsigned char) (write_ptr - read_ptr);
+}
+
+/**
+ * mei_me_hbuf_is_empty - checks if host buffer is empty.
+ *
+ * @dev: the device structure
+ *
+ * Return: true if empty, false - otherwise.
+ */
+static bool mei_me_hbuf_is_empty(struct mei_device *dev)
+{
+ return mei_hbuf_filled_slots(dev) == 0;
+}
+
+/**
+ * mei_me_hbuf_empty_slots - counts write empty slots.
+ *
+ * @dev: the device structure
+ *
+ * Return: -EOVERFLOW if overflow, otherwise empty slots count
+ */
+static int mei_me_hbuf_empty_slots(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned char filled_slots, empty_slots;
+
+ filled_slots = mei_hbuf_filled_slots(dev);
+ empty_slots = hw->hbuf_depth - filled_slots;
+
+ /* check for overflow */
+ if (filled_slots > hw->hbuf_depth)
+ return -EOVERFLOW;
+
+ return empty_slots;
+}
+
+/**
+ * mei_me_hbuf_depth - returns depth of the hw buffer.
+ *
+ * @dev: the device structure
+ *
+ * Return: size of hw buffer in slots
+ */
+static u32 mei_me_hbuf_depth(const struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ return hw->hbuf_depth;
+}
+
+/**
+ * mei_me_hbuf_write - writes a message to host hw buffer.
+ *
+ * @dev: the device structure
+ * @hdr: header of message
+ * @hdr_len: header length in bytes: must be multiplication of a slot (4bytes)
+ * @data: payload
+ * @data_len: payload length in bytes
+ *
+ * Return: 0 if success, < 0 - otherwise.
+ */
+static int mei_me_hbuf_write(struct mei_device *dev,
+ const void *hdr, size_t hdr_len,
+ const void *data, size_t data_len)
+{
+ unsigned long rem;
+ unsigned long i;
+ const u32 *reg_buf;
+ u32 dw_cnt;
+ int empty_slots;
+
+ if (WARN_ON(!hdr || !data || hdr_len & 0x3))
+ return -EINVAL;
+
+ dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM((struct mei_msg_hdr *)hdr));
+
+ empty_slots = mei_hbuf_empty_slots(dev);
+ dev_dbg(dev->dev, "empty slots = %hu.\n", empty_slots);
+
+ if (empty_slots < 0)
+ return -EOVERFLOW;
+
+ dw_cnt = mei_data2slots(hdr_len + data_len);
+ if (dw_cnt > (u32)empty_slots)
+ return -EMSGSIZE;
+
+ reg_buf = hdr;
+ for (i = 0; i < hdr_len / MEI_SLOT_SIZE; i++)
+ mei_me_hcbww_write(dev, reg_buf[i]);
+
+ reg_buf = data;
+ for (i = 0; i < data_len / MEI_SLOT_SIZE; i++)
+ mei_me_hcbww_write(dev, reg_buf[i]);
+
+ rem = data_len & 0x3;
+ if (rem > 0) {
+ u32 reg = 0;
+
+ memcpy(®, (const u8 *)data + data_len - rem, rem);
+ mei_me_hcbww_write(dev, reg);
+ }
+
+ mei_hcsr_set_hig(dev);
+ if (!mei_me_hw_is_ready(dev))
+ return -EIO;
+
+ return 0;
+}
+
+/**
+ * mei_me_count_full_read_slots - counts read full slots.
+ *
+ * @dev: the device structure
+ *
+ * Return: -EOVERFLOW if overflow, otherwise filled slots count
+ */
+static int mei_me_count_full_read_slots(struct mei_device *dev)
+{
+ u32 me_csr;
+ char read_ptr, write_ptr;
+ unsigned char buffer_depth, filled_slots;
+
+ me_csr = mei_me_mecsr_read(dev);
+ buffer_depth = (unsigned char)((me_csr & ME_CBD_HRA) >> 24);
+ read_ptr = (char) ((me_csr & ME_CBRP_HRA) >> 8);
+ write_ptr = (char) ((me_csr & ME_CBWP_HRA) >> 16);
+ filled_slots = (unsigned char) (write_ptr - read_ptr);
+
+ /* check for overflow */
+ if (filled_slots > buffer_depth)
+ return -EOVERFLOW;
+
+ dev_dbg(dev->dev, "filled_slots =%08x\n", filled_slots);
+ return (int)filled_slots;
+}
+
+/**
+ * mei_me_read_slots - reads a message from mei device.
+ *
+ * @dev: the device structure
+ * @buffer: message buffer will be written
+ * @buffer_length: message size will be read
+ *
+ * Return: always 0
+ */
+static int mei_me_read_slots(struct mei_device *dev, unsigned char *buffer,
+ unsigned long buffer_length)
+{
+ u32 *reg_buf = (u32 *)buffer;
+
+ for (; buffer_length >= MEI_SLOT_SIZE; buffer_length -= MEI_SLOT_SIZE)
+ *reg_buf++ = mei_me_mecbrw_read(dev);
+
+ if (buffer_length > 0) {
+ u32 reg = mei_me_mecbrw_read(dev);
+
+ memcpy(reg_buf, ®, buffer_length);
+ }
+
+ mei_hcsr_set_hig(dev);
+ return 0;
+}
+
+/**
+ * mei_me_pg_set - write pg enter register
+ *
+ * @dev: the device structure
+ */
+static void mei_me_pg_set(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 reg;
+
+ reg = mei_me_reg_read(hw, H_HPG_CSR);
+ trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
+
+ reg |= H_HPG_CSR_PGI;
+
+ trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
+ mei_me_reg_write(hw, H_HPG_CSR, reg);
+}
+
+/**
+ * mei_me_pg_unset - write pg exit register
+ *
+ * @dev: the device structure
+ */
+static void mei_me_pg_unset(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 reg;
+
+ reg = mei_me_reg_read(hw, H_HPG_CSR);
+ trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
+
+ WARN(!(reg & H_HPG_CSR_PGI), "PGI is not set\n");
+
+ reg |= H_HPG_CSR_PGIHEXR;
+
+ trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
+ mei_me_reg_write(hw, H_HPG_CSR, reg);
+}
+
+/**
+ * mei_me_pg_legacy_enter_sync - perform legacy pg entry procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_pg_legacy_enter_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
+ int ret;
+
+ dev->pg_event = MEI_PG_EVENT_WAIT;
+
+ ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD);
+ if (ret)
+ return ret;
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event == MEI_PG_EVENT_RECEIVED) {
+ mei_me_pg_set(dev);
+ ret = 0;
+ } else {
+ ret = -ETIME;
+ }
+
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ hw->pg_state = MEI_PG_ON;
+
+ return ret;
+}
+
+/**
+ * mei_me_pg_legacy_exit_sync - perform legacy pg exit procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_pg_legacy_exit_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
+ int ret;
+
+ if (dev->pg_event == MEI_PG_EVENT_RECEIVED)
+ goto reply;
+
+ dev->pg_event = MEI_PG_EVENT_WAIT;
+
+ mei_me_pg_unset(dev);
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
+ mutex_lock(&dev->device_lock);
+
+reply:
+ if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
+ ret = -ETIME;
+ goto out;
+ }
+
+ dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
+ ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_EXIT_RES_CMD);
+ if (ret)
+ return ret;
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED)
+ ret = 0;
+ else
+ ret = -ETIME;
+
+out:
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ hw->pg_state = MEI_PG_OFF;
+
+ return ret;
+}
+
+/**
+ * mei_me_pg_in_transition - is device now in pg transition
+ *
+ * @dev: the device structure
+ *
+ * Return: true if in pg transition, false otherwise
+ */
+static bool mei_me_pg_in_transition(struct mei_device *dev)
+{
+ return dev->pg_event >= MEI_PG_EVENT_WAIT &&
+ dev->pg_event <= MEI_PG_EVENT_INTR_WAIT;
+}
+
+/**
+ * mei_me_pg_is_enabled - detect if PG is supported by HW
+ *
+ * @dev: the device structure
+ *
+ * Return: true is pg supported, false otherwise
+ */
+static bool mei_me_pg_is_enabled(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 reg = mei_me_mecsr_read(dev);
+
+ if (hw->d0i3_supported)
+ return true;
+
+ if ((reg & ME_PGIC_HRA) == 0)
+ goto notsupported;
+
+ if (!dev->hbm_f_pg_supported)
+ goto notsupported;
+
+ return true;
+
+notsupported:
+ dev_dbg(dev->dev, "pg: not supported: d0i3 = %d HGP = %d hbm version %d.%d ?= %d.%d\n",
+ hw->d0i3_supported,
+ !!(reg & ME_PGIC_HRA),
+ dev->version.major_version,
+ dev->version.minor_version,
+ HBM_MAJOR_VERSION_PGI,
+ HBM_MINOR_VERSION_PGI);
+
+ return false;
+}
+
+/**
+ * mei_me_d0i3_set - write d0i3 register bit on mei device.
+ *
+ * @dev: the device structure
+ * @intr: ask for interrupt
+ *
+ * Return: D0I3C register value
+ */
+static u32 mei_me_d0i3_set(struct mei_device *dev, bool intr)
+{
+ u32 reg = mei_me_d0i3c_read(dev);
+
+ reg |= H_D0I3C_I3;
+ if (intr)
+ reg |= H_D0I3C_IR;
+ else
+ reg &= ~H_D0I3C_IR;
+ mei_me_d0i3c_write(dev, reg);
+ /* read it to ensure HW consistency */
+ reg = mei_me_d0i3c_read(dev);
+ return reg;
+}
+
+/**
+ * mei_me_d0i3_unset - clean d0i3 register bit on mei device.
+ *
+ * @dev: the device structure
+ *
+ * Return: D0I3C register value
+ */
+static u32 mei_me_d0i3_unset(struct mei_device *dev)
+{
+ u32 reg = mei_me_d0i3c_read(dev);
+
+ reg &= ~H_D0I3C_I3;
+ reg |= H_D0I3C_IR;
+ mei_me_d0i3c_write(dev, reg);
+ /* read it to ensure HW consistency */
+ reg = mei_me_d0i3c_read(dev);
+ return reg;
+}
+
+/**
+ * mei_me_d0i3_enter_sync - perform d0i3 entry procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_d0i3_enter_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned long d0i3_timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
+ unsigned long pgi_timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
+ int ret;
+ u32 reg;
+
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3) {
+ /* we are in d0i3, nothing to do */
+ dev_dbg(dev->dev, "d0i3 set not needed\n");
+ ret = 0;
+ goto on;
+ }
+
+ /* PGI entry procedure */
+ dev->pg_event = MEI_PG_EVENT_WAIT;
+
+ ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD);
+ if (ret)
+ /* FIXME: should we reset here? */
+ goto out;
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_RECEIVED, pgi_timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
+ ret = -ETIME;
+ goto out;
+ }
+ /* end PGI entry procedure */
+
+ dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
+
+ reg = mei_me_d0i3_set(dev, true);
+ if (!(reg & H_D0I3C_CIP)) {
+ dev_dbg(dev->dev, "d0i3 enter wait not needed\n");
+ ret = 0;
+ goto on;
+ }
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, d0i3_timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
+ reg = mei_me_d0i3c_read(dev);
+ if (!(reg & H_D0I3C_I3)) {
+ ret = -ETIME;
+ goto out;
+ }
+ }
+
+ ret = 0;
+on:
+ hw->pg_state = MEI_PG_ON;
+out:
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ dev_dbg(dev->dev, "d0i3 enter ret = %d\n", ret);
+ return ret;
+}
+
+/**
+ * mei_me_d0i3_enter - perform d0i3 entry procedure
+ * no hbm PG handshake
+ * no waiting for confirmation; runs with interrupts
+ * disabled
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_d0i3_enter(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 reg;
+
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3) {
+ /* we are in d0i3, nothing to do */
+ dev_dbg(dev->dev, "already d0i3 : set not needed\n");
+ goto on;
+ }
+
+ mei_me_d0i3_set(dev, false);
+on:
+ hw->pg_state = MEI_PG_ON;
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ dev_dbg(dev->dev, "d0i3 enter\n");
+ return 0;
+}
+
+/**
+ * mei_me_d0i3_exit_sync - perform d0i3 exit procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_d0i3_exit_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned long timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
+ int ret;
+ u32 reg;
+
+ dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
+
+ reg = mei_me_d0i3c_read(dev);
+ if (!(reg & H_D0I3C_I3)) {
+ /* we are not in d0i3, nothing to do */
+ dev_dbg(dev->dev, "d0i3 exit not needed\n");
+ ret = 0;
+ goto off;
+ }
+
+ reg = mei_me_d0i3_unset(dev);
+ if (!(reg & H_D0I3C_CIP)) {
+ dev_dbg(dev->dev, "d0i3 exit wait not needed\n");
+ ret = 0;
+ goto off;
+ }
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3) {
+ ret = -ETIME;
+ goto out;
+ }
+ }
+
+ ret = 0;
+off:
+ hw->pg_state = MEI_PG_OFF;
+out:
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+
+ dev_dbg(dev->dev, "d0i3 exit ret = %d\n", ret);
+ return ret;
+}
+
+/**
+ * mei_me_pg_legacy_intr - perform legacy pg processing
+ * in interrupt thread handler
+ *
+ * @dev: the device structure
+ */
+static void mei_me_pg_legacy_intr(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (dev->pg_event != MEI_PG_EVENT_INTR_WAIT)
+ return;
+
+ dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
+ hw->pg_state = MEI_PG_OFF;
+ if (waitqueue_active(&dev->wait_pg))
+ wake_up(&dev->wait_pg);
+}
+
+/**
+ * mei_me_d0i3_intr - perform d0i3 processing in interrupt thread handler
+ *
+ * @dev: the device structure
+ * @intr_source: interrupt source
+ */
+static void mei_me_d0i3_intr(struct mei_device *dev, u32 intr_source)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (dev->pg_event == MEI_PG_EVENT_INTR_WAIT &&
+ (intr_source & H_D0I3C_IS)) {
+ dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
+ if (hw->pg_state == MEI_PG_ON) {
+ hw->pg_state = MEI_PG_OFF;
+ if (dev->hbm_state != MEI_HBM_IDLE) {
+ /*
+ * force H_RDY because it could be
+ * wiped off during PG
+ */
+ dev_dbg(dev->dev, "d0i3 set host ready\n");
+ mei_me_host_set_ready(dev);
+ }
+ } else {
+ hw->pg_state = MEI_PG_ON;
+ }
+
+ wake_up(&dev->wait_pg);
+ }
+
+ if (hw->pg_state == MEI_PG_ON && (intr_source & H_IS)) {
+ /*
+ * HW sent some data and we are in D0i3, so
+ * we got here because of HW initiated exit from D0i3.
+ * Start runtime pm resume sequence to exit low power state.
+ */
+ dev_dbg(dev->dev, "d0i3 want resume\n");
+ mei_hbm_pg_resume(dev);
+ }
+}
+
+/**
+ * mei_me_pg_intr - perform pg processing in interrupt thread handler
+ *
+ * @dev: the device structure
+ * @intr_source: interrupt source
+ */
+static void mei_me_pg_intr(struct mei_device *dev, u32 intr_source)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (hw->d0i3_supported)
+ mei_me_d0i3_intr(dev, intr_source);
+ else
+ mei_me_pg_legacy_intr(dev);
+}
+
+/**
+ * mei_me_pg_enter_sync - perform runtime pm entry procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+int mei_me_pg_enter_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (hw->d0i3_supported)
+ return mei_me_d0i3_enter_sync(dev);
+ else
+ return mei_me_pg_legacy_enter_sync(dev);
+}
+
+/**
+ * mei_me_pg_exit_sync - perform runtime pm exit procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+int mei_me_pg_exit_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (hw->d0i3_supported)
+ return mei_me_d0i3_exit_sync(dev);
+ else
+ return mei_me_pg_legacy_exit_sync(dev);
+}
+
+/**
+ * mei_me_hw_reset - resets fw via mei csr register.
+ *
+ * @dev: the device structure
+ * @intr_enable: if interrupt should be enabled after reset.
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ int ret;
+ u32 hcsr;
+
+ if (intr_enable) {
+ mei_me_intr_enable(dev);
+ if (hw->d0i3_supported) {
+ ret = mei_me_d0i3_exit_sync(dev);
+ if (ret)
+ return ret;
+ }
+ }
+
+ pm_runtime_set_active(dev->dev);
+
+ hcsr = mei_hcsr_read(dev);
+ /* H_RST may be found lit before reset is started,
+ * for example if preceding reset flow hasn't completed.
+ * In that case asserting H_RST will be ignored, therefore
+ * we need to clean H_RST bit to start a successful reset sequence.
+ */
+ if ((hcsr & H_RST) == H_RST) {
+ dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr);
+ hcsr &= ~H_RST;
+ mei_hcsr_set(dev, hcsr);
+ hcsr = mei_hcsr_read(dev);
+ }
+
+ hcsr |= H_RST | H_IG | H_CSR_IS_MASK;
+
+ if (!intr_enable)
+ hcsr &= ~H_CSR_IE_MASK;
+
+ dev->recvd_hw_ready = false;
+ mei_hcsr_write(dev, hcsr);
+
+ /*
+ * Host reads the H_CSR once to ensure that the
+ * posted write to H_CSR completes.
+ */
+ hcsr = mei_hcsr_read(dev);
+
+ if ((hcsr & H_RST) == 0)
+ dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr);
+
+ if ((hcsr & H_RDY) == H_RDY)
+ dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr);
+
+ if (!intr_enable) {
+ mei_me_hw_reset_release(dev);
+ if (hw->d0i3_supported) {
+ ret = mei_me_d0i3_enter(dev);
+ if (ret)
+ return ret;
+ }
+ }
+ return 0;
+}
+
+/**
+ * mei_me_irq_quick_handler - The ISR of the MEI device
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * Return: irqreturn_t
+ */
+irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = (struct mei_device *)dev_id;
+ u32 hcsr;
+
+ hcsr = mei_hcsr_read(dev);
+ if (!me_intr_src(hcsr))
+ return IRQ_NONE;
+
+ dev_dbg(dev->dev, "interrupt source 0x%08X\n", me_intr_src(hcsr));
+
+ /* disable interrupts on device */
+ me_intr_disable(dev, hcsr);
+ return IRQ_WAKE_THREAD;
+}
+
+/**
+ * mei_me_irq_thread_handler - function called after ISR to handle the interrupt
+ * processing.
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * Return: irqreturn_t
+ *
+ */
+irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = (struct mei_device *) dev_id;
+ struct list_head cmpl_list;
+ s32 slots;
+ u32 hcsr;
+ int rets = 0;
+
+ dev_dbg(dev->dev, "function called after ISR to handle the interrupt processing.\n");
+ /* initialize our complete list */
+ mutex_lock(&dev->device_lock);
+
+ hcsr = mei_hcsr_read(dev);
+ me_intr_clear(dev, hcsr);
+
+ INIT_LIST_HEAD(&cmpl_list);
+
+ /* check if ME wants a reset */
+ if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) {
+ dev_warn(dev->dev, "FW not ready: resetting.\n");
+ schedule_work(&dev->reset_work);
+ goto end;
+ }
+
+ if (mei_me_hw_is_resetting(dev))
+ mei_hcsr_set_hig(dev);
+
+ mei_me_pg_intr(dev, me_intr_src(hcsr));
+
+ /* check if we need to start the dev */
+ if (!mei_host_is_ready(dev)) {
+ if (mei_hw_is_ready(dev)) {
+ dev_dbg(dev->dev, "we need to start the dev.\n");
+ dev->recvd_hw_ready = true;
+ wake_up(&dev->wait_hw_ready);
+ } else {
+ dev_dbg(dev->dev, "Spurious Interrupt\n");
+ }
+ goto end;
+ }
+ /* check slots available for reading */
+ slots = mei_count_full_read_slots(dev);
+ while (slots > 0) {
+ dev_dbg(dev->dev, "slots to read = %08x\n", slots);
+ rets = mei_irq_read_handler(dev, &cmpl_list, &slots);
+ /* There is a race between ME write and interrupt delivery:
+ * Not all data is always available immediately after the
+ * interrupt, so try to read again on the next interrupt.
+ */
+ if (rets == -ENODATA)
+ break;
+
+ if (rets &&
+ (dev->dev_state != MEI_DEV_RESETTING &&
+ dev->dev_state != MEI_DEV_POWER_DOWN)) {
+ dev_err(dev->dev, "mei_irq_read_handler ret = %d.\n",
+ rets);
+ schedule_work(&dev->reset_work);
+ goto end;
+ }
+ }
+
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+
+ /*
+ * During PG handshake only allowed write is the replay to the
+ * PG exit message, so block calling write function
+ * if the pg event is in PG handshake
+ */
+ if (dev->pg_event != MEI_PG_EVENT_WAIT &&
+ dev->pg_event != MEI_PG_EVENT_RECEIVED) {
+ rets = mei_irq_write_handler(dev, &cmpl_list);
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+ }
+
+ mei_irq_compl_handler(dev, &cmpl_list);
+
+end:
+ dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets);
+ mei_me_intr_enable(dev);
+ mutex_unlock(&dev->device_lock);
+ return IRQ_HANDLED;
+}
+
+static const struct mei_hw_ops mei_me_hw_ops = {
+
+ .fw_status = mei_me_fw_status,
+ .pg_state = mei_me_pg_state,
+
+ .host_is_ready = mei_me_host_is_ready,
+
+ .hw_is_ready = mei_me_hw_is_ready,
+ .hw_reset = mei_me_hw_reset,
+ .hw_config = mei_me_hw_config,
+ .hw_start = mei_me_hw_start,
+
+ .pg_in_transition = mei_me_pg_in_transition,
+ .pg_is_enabled = mei_me_pg_is_enabled,
+
+ .intr_clear = mei_me_intr_clear,
+ .intr_enable = mei_me_intr_enable,
+ .intr_disable = mei_me_intr_disable,
+ .synchronize_irq = mei_me_synchronize_irq,
+
+ .hbuf_free_slots = mei_me_hbuf_empty_slots,
+ .hbuf_is_ready = mei_me_hbuf_is_empty,
+ .hbuf_depth = mei_me_hbuf_depth,
+
+ .write = mei_me_hbuf_write,
+
+ .rdbuf_full_slots = mei_me_count_full_read_slots,
+ .read_hdr = mei_me_mecbrw_read,
+ .read = mei_me_read_slots
+};
+
+static bool mei_me_fw_type_nm(struct pci_dev *pdev)
+{
+ u32 reg;
+
+ pci_read_config_dword(pdev, PCI_CFG_HFS_2, ®);
+ trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_2", PCI_CFG_HFS_2, reg);
+ /* make sure that bit 9 (NM) is up and bit 10 (DM) is down */
+ return (reg & 0x600) == 0x200;
+}
+
+#define MEI_CFG_FW_NM \
+ .quirk_probe = mei_me_fw_type_nm
+
+static bool mei_me_fw_type_sps(struct pci_dev *pdev)
+{
+ u32 reg;
+ unsigned int devfn;
+
+ /*
+ * Read ME FW Status register to check for SPS Firmware
+ * The SPS FW is only signaled in pci function 0
+ */
+ devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
+ pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_1, ®);
+ trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg);
+ /* if bits [19:16] = 15, running SPS Firmware */
+ return (reg & 0xf0000) == 0xf0000;
+}
+
+#define MEI_CFG_FW_SPS \
+ .quirk_probe = mei_me_fw_type_sps
+
+
+#define MEI_CFG_ICH_HFS \
+ .fw_status.count = 0
+
+#define MEI_CFG_ICH10_HFS \
+ .fw_status.count = 1, \
+ .fw_status.status[0] = PCI_CFG_HFS_1
+
+#define MEI_CFG_PCH_HFS \
+ .fw_status.count = 2, \
+ .fw_status.status[0] = PCI_CFG_HFS_1, \
+ .fw_status.status[1] = PCI_CFG_HFS_2
+
+#define MEI_CFG_PCH8_HFS \
+ .fw_status.count = 6, \
+ .fw_status.status[0] = PCI_CFG_HFS_1, \
+ .fw_status.status[1] = PCI_CFG_HFS_2, \
+ .fw_status.status[2] = PCI_CFG_HFS_3, \
+ .fw_status.status[3] = PCI_CFG_HFS_4, \
+ .fw_status.status[4] = PCI_CFG_HFS_5, \
+ .fw_status.status[5] = PCI_CFG_HFS_6
+
+#define MEI_CFG_DMA_128 \
+ .dma_size[DMA_DSCR_HOST] = SZ_128K, \
+ .dma_size[DMA_DSCR_DEVICE] = SZ_128K, \
+ .dma_size[DMA_DSCR_CTRL] = PAGE_SIZE
+
+/* ICH Legacy devices */
+static const struct mei_cfg mei_me_ich_cfg = {
+ MEI_CFG_ICH_HFS,
+};
+
+/* ICH devices */
+static const struct mei_cfg mei_me_ich10_cfg = {
+ MEI_CFG_ICH10_HFS,
+};
+
+/* PCH devices */
+static const struct mei_cfg mei_me_pch_cfg = {
+ MEI_CFG_PCH_HFS,
+};
+
+/* PCH Cougar Point and Patsburg with quirk for Node Manager exclusion */
+static const struct mei_cfg mei_me_pch_cpt_pbg_cfg = {
+ MEI_CFG_PCH_HFS,
+ MEI_CFG_FW_NM,
+};
+
+/* PCH8 Lynx Point and newer devices */
+static const struct mei_cfg mei_me_pch8_cfg = {
+ MEI_CFG_PCH8_HFS,
+};
+
+/* PCH8 Lynx Point with quirk for SPS Firmware exclusion */
+static const struct mei_cfg mei_me_pch8_sps_cfg = {
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_FW_SPS,
+};
+
+/* Cannon Lake and newer devices */
+static const struct mei_cfg mei_me_pch12_cfg = {
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_DMA_128,
+};
+
+/*
+ * mei_cfg_list - A list of platform platform specific configurations.
+ * Note: has to be synchronized with enum mei_cfg_idx.
+ */
+static const struct mei_cfg *const mei_cfg_list[] = {
+ [MEI_ME_UNDEF_CFG] = NULL,
+ [MEI_ME_ICH_CFG] = &mei_me_ich_cfg,
+ [MEI_ME_ICH10_CFG] = &mei_me_ich10_cfg,
+ [MEI_ME_PCH_CFG] = &mei_me_pch_cfg,
+ [MEI_ME_PCH_CPT_PBG_CFG] = &mei_me_pch_cpt_pbg_cfg,
+ [MEI_ME_PCH8_CFG] = &mei_me_pch8_cfg,
+ [MEI_ME_PCH8_SPS_CFG] = &mei_me_pch8_sps_cfg,
+ [MEI_ME_PCH12_CFG] = &mei_me_pch12_cfg,
+};
+
+const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx)
+{
+ BUILD_BUG_ON(ARRAY_SIZE(mei_cfg_list) != MEI_ME_NUM_CFG);
+
+ if (idx >= MEI_ME_NUM_CFG)
+ return NULL;
+
+ return mei_cfg_list[idx];
+};
+
+/**
+ * mei_me_dev_init - allocates and initializes the mei device structure
+ *
+ * @pdev: The pci device structure
+ * @cfg: per device generation config
+ *
+ * Return: The mei_device pointer on success, NULL on failure.
+ */
+struct mei_device *mei_me_dev_init(struct pci_dev *pdev,
+ const struct mei_cfg *cfg)
+{
+ struct mei_device *dev;
+ struct mei_me_hw *hw;
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(struct mei_device) +
+ sizeof(struct mei_me_hw), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+ hw = to_me_hw(dev);
+
+ mei_device_init(dev, &pdev->dev, &mei_me_hw_ops);
+ hw->cfg = cfg;
+ return dev;
+}
+
diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h
new file mode 100644
index 0000000..bbcc5fc
--- /dev/null
+++ b/drivers/misc/mei/hw-me.h
@@ -0,0 +1,111 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+
+
+#ifndef _MEI_INTERFACE_H_
+#define _MEI_INTERFACE_H_
+
+#include <linux/irqreturn.h>
+#include <linux/pci.h>
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "client.h"
+
+/*
+ * mei_cfg - mei device configuration
+ *
+ * @fw_status: FW status
+ * @quirk_probe: device exclusion quirk
+ * @dma_size: device DMA buffers size
+ */
+struct mei_cfg {
+ const struct mei_fw_status fw_status;
+ bool (*quirk_probe)(struct pci_dev *pdev);
+ size_t dma_size[DMA_DSCR_NUM];
+};
+
+
+#define MEI_PCI_DEVICE(dev, cfg) \
+ .vendor = PCI_VENDOR_ID_INTEL, .device = (dev), \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, \
+ .driver_data = (kernel_ulong_t)(cfg),
+
+#define MEI_ME_RPM_TIMEOUT 500 /* ms */
+
+/**
+ * struct mei_me_hw - me hw specific data
+ *
+ * @cfg: per device generation config and ops
+ * @mem_addr: io memory address
+ * @pg_state: power gating state
+ * @d0i3_supported: di03 support
+ * @hbuf_depth: depth of hardware host/write buffer in slots
+ */
+struct mei_me_hw {
+ const struct mei_cfg *cfg;
+ void __iomem *mem_addr;
+ enum mei_pg_state pg_state;
+ bool d0i3_supported;
+ u8 hbuf_depth;
+};
+
+#define to_me_hw(dev) (struct mei_me_hw *)((dev)->hw)
+
+/**
+ * enum mei_cfg_idx - indices to platform specific configurations.
+ *
+ * Note: has to be synchronized with mei_cfg_list[]
+ *
+ * @MEI_ME_UNDEF_CFG: Lower sentinel.
+ * @MEI_ME_ICH_CFG: I/O Controller Hub legacy devices.
+ * @MEI_ME_ICH10_CFG: I/O Controller Hub platforms Gen10
+ * @MEI_ME_PCH_CFG: Platform Controller Hub platforms (Up to Gen8).
+ * @MEI_ME_PCH_CPT_PBG_CFG:Platform Controller Hub workstations
+ * with quirk for Node Manager exclusion.
+ * @MEI_ME_PCH8_CFG: Platform Controller Hub Gen8 and newer
+ * client platforms.
+ * @MEI_ME_PCH8_SPS_CFG: Platform Controller Hub Gen8 and newer
+ * servers platforms with quirk for
+ * SPS firmware exclusion.
+ * @MEI_ME_PCH12_CFG: Platform Controller Hub Gen12 and newer
+ * @MEI_ME_NUM_CFG: Upper Sentinel.
+ */
+enum mei_cfg_idx {
+ MEI_ME_UNDEF_CFG,
+ MEI_ME_ICH_CFG,
+ MEI_ME_ICH10_CFG,
+ MEI_ME_PCH_CFG,
+ MEI_ME_PCH_CPT_PBG_CFG,
+ MEI_ME_PCH8_CFG,
+ MEI_ME_PCH8_SPS_CFG,
+ MEI_ME_PCH12_CFG,
+ MEI_ME_NUM_CFG,
+};
+
+const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx);
+
+struct mei_device *mei_me_dev_init(struct pci_dev *pdev,
+ const struct mei_cfg *cfg);
+
+int mei_me_pg_enter_sync(struct mei_device *dev);
+int mei_me_pg_exit_sync(struct mei_device *dev);
+
+irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id);
+irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id);
+
+#endif /* _MEI_INTERFACE_H_ */
diff --git a/drivers/misc/mei/hw-txe-regs.h b/drivers/misc/mei/hw-txe-regs.h
new file mode 100644
index 0000000..f19229c
--- /dev/null
+++ b/drivers/misc/mei/hw-txe-regs.h
@@ -0,0 +1,294 @@
+/******************************************************************************
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Intel MEI Interface Header
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING
+ *
+ * Contact Information:
+ * Intel Corporation.
+ * linux-mei@linux.intel.com
+ * http://www.intel.com
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef _MEI_HW_TXE_REGS_H_
+#define _MEI_HW_TXE_REGS_H_
+
+#include "hw.h"
+
+#define SEC_ALIVENESS_TIMER_TIMEOUT (5 * MSEC_PER_SEC)
+#define SEC_ALIVENESS_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
+#define SEC_RESET_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
+#define SEC_READY_WAIT_TIMEOUT (5 * MSEC_PER_SEC)
+#define START_MESSAGE_RESPONSE_WAIT_TIMEOUT (5 * MSEC_PER_SEC)
+#define RESET_CANCEL_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
+
+enum {
+ SEC_BAR,
+ BRIDGE_BAR,
+
+ NUM_OF_MEM_BARS
+};
+
+/* SeC FW Status Register
+ *
+ * FW uses this register in order to report its status to host.
+ * This register resides in PCI-E config space.
+ */
+#define PCI_CFG_TXE_FW_STS0 0x40
+# define PCI_CFG_TXE_FW_STS0_WRK_ST_MSK 0x0000000F
+# define PCI_CFG_TXE_FW_STS0_OP_ST_MSK 0x000001C0
+# define PCI_CFG_TXE_FW_STS0_FW_INIT_CMPLT 0x00000200
+# define PCI_CFG_TXE_FW_STS0_ERR_CODE_MSK 0x0000F000
+# define PCI_CFG_TXE_FW_STS0_OP_MODE_MSK 0x000F0000
+# define PCI_CFG_TXE_FW_STS0_RST_CNT_MSK 0x00F00000
+#define PCI_CFG_TXE_FW_STS1 0x48
+
+#define IPC_BASE_ADDR 0x80400 /* SeC IPC Base Address */
+
+/* IPC Input Doorbell Register */
+#define SEC_IPC_INPUT_DOORBELL_REG (0x0000 + IPC_BASE_ADDR)
+
+/* IPC Input Status Register
+ * This register indicates whether or not processing of
+ * the most recent command has been completed by the SEC
+ * New commands and payloads should not be written by the Host
+ * until this indicates that the previous command has been processed.
+ */
+#define SEC_IPC_INPUT_STATUS_REG (0x0008 + IPC_BASE_ADDR)
+# define SEC_IPC_INPUT_STATUS_RDY BIT(0)
+
+/* IPC Host Interrupt Status Register */
+#define SEC_IPC_HOST_INT_STATUS_REG (0x0010 + IPC_BASE_ADDR)
+#define SEC_IPC_HOST_INT_STATUS_OUT_DB BIT(0)
+#define SEC_IPC_HOST_INT_STATUS_IN_RDY BIT(1)
+#define SEC_IPC_HOST_INT_STATUS_HDCP_M0_RCVD BIT(5)
+#define SEC_IPC_HOST_INT_STATUS_ILL_MEM_ACCESS BIT(17)
+#define SEC_IPC_HOST_INT_STATUS_AES_HKEY_ERR BIT(18)
+#define SEC_IPC_HOST_INT_STATUS_DES_HKEY_ERR BIT(19)
+#define SEC_IPC_HOST_INT_STATUS_TMRMTB_OVERFLOW BIT(21)
+
+/* Convenient mask for pending interrupts */
+#define SEC_IPC_HOST_INT_STATUS_PENDING \
+ (SEC_IPC_HOST_INT_STATUS_OUT_DB| \
+ SEC_IPC_HOST_INT_STATUS_IN_RDY)
+
+/* IPC Host Interrupt Mask Register */
+#define SEC_IPC_HOST_INT_MASK_REG (0x0014 + IPC_BASE_ADDR)
+
+# define SEC_IPC_HOST_INT_MASK_OUT_DB BIT(0) /* Output Doorbell Int Mask */
+# define SEC_IPC_HOST_INT_MASK_IN_RDY BIT(1) /* Input Ready Int Mask */
+
+/* IPC Input Payload RAM */
+#define SEC_IPC_INPUT_PAYLOAD_REG (0x0100 + IPC_BASE_ADDR)
+/* IPC Shared Payload RAM */
+#define IPC_SHARED_PAYLOAD_REG (0x0200 + IPC_BASE_ADDR)
+
+/* SeC Address Translation Table Entry 2 - Ctrl
+ *
+ * This register resides also in SeC's PCI-E Memory space.
+ */
+#define SATT2_CTRL_REG 0x1040
+# define SATT2_CTRL_VALID_MSK BIT(0)
+# define SATT2_CTRL_BR_BASE_ADDR_REG_SHIFT 8
+# define SATT2_CTRL_BRIDGE_HOST_EN_MSK BIT(12)
+
+/* SATT Table Entry 2 SAP Base Address Register */
+#define SATT2_SAP_BA_REG 0x1044
+/* SATT Table Entry 2 SAP Size Register. */
+#define SATT2_SAP_SIZE_REG 0x1048
+ /* SATT Table Entry 2 SAP Bridge Address - LSB Register */
+#define SATT2_BRG_BA_LSB_REG 0x104C
+
+/* Host High-level Interrupt Status Register */
+#define HHISR_REG 0x2020
+/* Host High-level Interrupt Enable Register
+ *
+ * Resides in PCI memory space. This is the top hierarchy for
+ * interrupts from SeC to host, aggregating both interrupts that
+ * arrive through HICR registers as well as interrupts
+ * that arrive via IPC.
+ */
+#define HHIER_REG 0x2024
+#define IPC_HHIER_SEC BIT(0)
+#define IPC_HHIER_BRIDGE BIT(1)
+#define IPC_HHIER_MSK (IPC_HHIER_SEC | IPC_HHIER_BRIDGE)
+
+/* Host High-level Interrupt Mask Register.
+ *
+ * Resides in PCI memory space.
+ * This is the top hierarchy for masking interrupts from SeC to host.
+ */
+#define HHIMR_REG 0x2028
+#define IPC_HHIMR_SEC BIT(0)
+#define IPC_HHIMR_BRIDGE BIT(1)
+
+/* Host High-level IRQ Status Register */
+#define HHIRQSR_REG 0x202C
+
+/* Host Interrupt Cause Register 0 - SeC IPC Readiness
+ *
+ * This register is both an ICR to Host from PCI Memory Space
+ * and it is also exposed in the SeC memory space.
+ * This register is used by SeC's IPC driver in order
+ * to synchronize with host about IPC interface state.
+ */
+#define HICR_SEC_IPC_READINESS_REG 0x2040
+#define HICR_SEC_IPC_READINESS_HOST_RDY BIT(0)
+#define HICR_SEC_IPC_READINESS_SEC_RDY BIT(1)
+#define HICR_SEC_IPC_READINESS_SYS_RDY \
+ (HICR_SEC_IPC_READINESS_HOST_RDY | \
+ HICR_SEC_IPC_READINESS_SEC_RDY)
+#define HICR_SEC_IPC_READINESS_RDY_CLR BIT(2)
+
+/* Host Interrupt Cause Register 1 - Aliveness Response */
+/* This register is both an ICR to Host from PCI Memory Space
+ * and it is also exposed in the SeC memory space.
+ * The register may be used by SeC to ACK a host request for aliveness.
+ */
+#define HICR_HOST_ALIVENESS_RESP_REG 0x2044
+#define HICR_HOST_ALIVENESS_RESP_ACK BIT(0)
+
+/* Host Interrupt Cause Register 2 - SeC IPC Output Doorbell */
+#define HICR_SEC_IPC_OUTPUT_DOORBELL_REG 0x2048
+
+/* Host Interrupt Status Register.
+ *
+ * Resides in PCI memory space.
+ * This is the main register involved in generating interrupts
+ * from SeC to host via HICRs.
+ * The interrupt generation rules are as follows:
+ * An interrupt will be generated whenever for any i,
+ * there is a transition from a state where at least one of
+ * the following conditions did not hold, to a state where
+ * ALL the following conditions hold:
+ * A) HISR.INT[i]_STS == 1.
+ * B) HIER.INT[i]_EN == 1.
+ */
+#define HISR_REG 0x2060
+#define HISR_INT_0_STS BIT(0)
+#define HISR_INT_1_STS BIT(1)
+#define HISR_INT_2_STS BIT(2)
+#define HISR_INT_3_STS BIT(3)
+#define HISR_INT_4_STS BIT(4)
+#define HISR_INT_5_STS BIT(5)
+#define HISR_INT_6_STS BIT(6)
+#define HISR_INT_7_STS BIT(7)
+#define HISR_INT_STS_MSK \
+ (HISR_INT_0_STS | HISR_INT_1_STS | HISR_INT_2_STS)
+
+/* Host Interrupt Enable Register. Resides in PCI memory space. */
+#define HIER_REG 0x2064
+#define HIER_INT_0_EN BIT(0)
+#define HIER_INT_1_EN BIT(1)
+#define HIER_INT_2_EN BIT(2)
+#define HIER_INT_3_EN BIT(3)
+#define HIER_INT_4_EN BIT(4)
+#define HIER_INT_5_EN BIT(5)
+#define HIER_INT_6_EN BIT(6)
+#define HIER_INT_7_EN BIT(7)
+
+#define HIER_INT_EN_MSK \
+ (HIER_INT_0_EN | HIER_INT_1_EN | HIER_INT_2_EN)
+
+
+/* SEC Memory Space IPC output payload.
+ *
+ * This register is part of the output payload which SEC provides to host.
+ */
+#define BRIDGE_IPC_OUTPUT_PAYLOAD_REG 0x20C0
+
+/* SeC Interrupt Cause Register - Host Aliveness Request
+ * This register is both an ICR to SeC and it is also exposed
+ * in the host-visible PCI memory space.
+ * The register is used by host to request SeC aliveness.
+ */
+#define SICR_HOST_ALIVENESS_REQ_REG 0x214C
+#define SICR_HOST_ALIVENESS_REQ_REQUESTED BIT(0)
+
+
+/* SeC Interrupt Cause Register - Host IPC Readiness
+ *
+ * This register is both an ICR to SeC and it is also exposed
+ * in the host-visible PCI memory space.
+ * This register is used by the host's SeC driver uses in order
+ * to synchronize with SeC about IPC interface state.
+ */
+#define SICR_HOST_IPC_READINESS_REQ_REG 0x2150
+
+
+#define SICR_HOST_IPC_READINESS_HOST_RDY BIT(0)
+#define SICR_HOST_IPC_READINESS_SEC_RDY BIT(1)
+#define SICR_HOST_IPC_READINESS_SYS_RDY \
+ (SICR_HOST_IPC_READINESS_HOST_RDY | \
+ SICR_HOST_IPC_READINESS_SEC_RDY)
+#define SICR_HOST_IPC_READINESS_RDY_CLR BIT(2)
+
+/* SeC Interrupt Cause Register - SeC IPC Output Status
+ *
+ * This register indicates whether or not processing of the most recent
+ * command has been completed by the Host.
+ * New commands and payloads should not be written by SeC until this
+ * register indicates that the previous command has been processed.
+ */
+#define SICR_SEC_IPC_OUTPUT_STATUS_REG 0x2154
+# define SEC_IPC_OUTPUT_STATUS_RDY BIT(0)
+
+
+
+/* MEI IPC Message payload size 64 bytes */
+#define PAYLOAD_SIZE 64
+
+/* MAX size for SATT range 32MB */
+#define SATT_RANGE_MAX (32 << 20)
+
+
+#endif /* _MEI_HW_TXE_REGS_H_ */
+
diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c
new file mode 100644
index 0000000..8449fe0
--- /dev/null
+++ b/drivers/misc/mei/hw-txe.c
@@ -0,0 +1,1267 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2013-2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+#include <linux/ktime.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "hw-txe.h"
+#include "client.h"
+#include "hbm.h"
+
+#include "mei-trace.h"
+
+#define TXE_HBUF_DEPTH (PAYLOAD_SIZE / MEI_SLOT_SIZE)
+
+/**
+ * mei_txe_reg_read - Reads 32bit data from the txe device
+ *
+ * @base_addr: registers base address
+ * @offset: register offset
+ *
+ * Return: register value
+ */
+static inline u32 mei_txe_reg_read(void __iomem *base_addr,
+ unsigned long offset)
+{
+ return ioread32(base_addr + offset);
+}
+
+/**
+ * mei_txe_reg_write - Writes 32bit data to the txe device
+ *
+ * @base_addr: registers base address
+ * @offset: register offset
+ * @value: the value to write
+ */
+static inline void mei_txe_reg_write(void __iomem *base_addr,
+ unsigned long offset, u32 value)
+{
+ iowrite32(value, base_addr + offset);
+}
+
+/**
+ * mei_txe_sec_reg_read_silent - Reads 32bit data from the SeC BAR
+ *
+ * @hw: the txe hardware structure
+ * @offset: register offset
+ *
+ * Doesn't check for aliveness while Reads 32bit data from the SeC BAR
+ *
+ * Return: register value
+ */
+static inline u32 mei_txe_sec_reg_read_silent(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ return mei_txe_reg_read(hw->mem_addr[SEC_BAR], offset);
+}
+
+/**
+ * mei_txe_sec_reg_read - Reads 32bit data from the SeC BAR
+ *
+ * @hw: the txe hardware structure
+ * @offset: register offset
+ *
+ * Reads 32bit data from the SeC BAR and shout loud if aliveness is not set
+ *
+ * Return: register value
+ */
+static inline u32 mei_txe_sec_reg_read(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ WARN(!hw->aliveness, "sec read: aliveness not asserted\n");
+ return mei_txe_sec_reg_read_silent(hw, offset);
+}
+/**
+ * mei_txe_sec_reg_write_silent - Writes 32bit data to the SeC BAR
+ * doesn't check for aliveness
+ *
+ * @hw: the txe hardware structure
+ * @offset: register offset
+ * @value: value to write
+ *
+ * Doesn't check for aliveness while writes 32bit data from to the SeC BAR
+ */
+static inline void mei_txe_sec_reg_write_silent(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ mei_txe_reg_write(hw->mem_addr[SEC_BAR], offset, value);
+}
+
+/**
+ * mei_txe_sec_reg_write - Writes 32bit data to the SeC BAR
+ *
+ * @hw: the txe hardware structure
+ * @offset: register offset
+ * @value: value to write
+ *
+ * Writes 32bit data from the SeC BAR and shout loud if aliveness is not set
+ */
+static inline void mei_txe_sec_reg_write(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ WARN(!hw->aliveness, "sec write: aliveness not asserted\n");
+ mei_txe_sec_reg_write_silent(hw, offset, value);
+}
+/**
+ * mei_txe_br_reg_read - Reads 32bit data from the Bridge BAR
+ *
+ * @hw: the txe hardware structure
+ * @offset: offset from which to read the data
+ *
+ * Return: the byte read.
+ */
+static inline u32 mei_txe_br_reg_read(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ return mei_txe_reg_read(hw->mem_addr[BRIDGE_BAR], offset);
+}
+
+/**
+ * mei_txe_br_reg_write - Writes 32bit data to the Bridge BAR
+ *
+ * @hw: the txe hardware structure
+ * @offset: offset from which to write the data
+ * @value: the byte to write
+ */
+static inline void mei_txe_br_reg_write(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ mei_txe_reg_write(hw->mem_addr[BRIDGE_BAR], offset, value);
+}
+
+/**
+ * mei_txe_aliveness_set - request for aliveness change
+ *
+ * @dev: the device structure
+ * @req: requested aliveness value
+ *
+ * Request for aliveness change and returns true if the change is
+ * really needed and false if aliveness is already
+ * in the requested state
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * Return: true if request was send
+ */
+static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ bool do_req = hw->aliveness != req;
+
+ dev_dbg(dev->dev, "Aliveness current=%d request=%d\n",
+ hw->aliveness, req);
+ if (do_req) {
+ dev->pg_event = MEI_PG_EVENT_WAIT;
+ mei_txe_br_reg_write(hw, SICR_HOST_ALIVENESS_REQ_REG, req);
+ }
+ return do_req;
+}
+
+
+/**
+ * mei_txe_aliveness_req_get - get aliveness requested register value
+ *
+ * @dev: the device structure
+ *
+ * Extract HICR_HOST_ALIVENESS_RESP_ACK bit from
+ * from HICR_HOST_ALIVENESS_REQ register value
+ *
+ * Return: SICR_HOST_ALIVENESS_REQ_REQUESTED bit value
+ */
+static u32 mei_txe_aliveness_req_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg;
+
+ reg = mei_txe_br_reg_read(hw, SICR_HOST_ALIVENESS_REQ_REG);
+ return reg & SICR_HOST_ALIVENESS_REQ_REQUESTED;
+}
+
+/**
+ * mei_txe_aliveness_get - get aliveness response register value
+ *
+ * @dev: the device structure
+ *
+ * Return: HICR_HOST_ALIVENESS_RESP_ACK bit from HICR_HOST_ALIVENESS_RESP
+ * register
+ */
+static u32 mei_txe_aliveness_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg;
+
+ reg = mei_txe_br_reg_read(hw, HICR_HOST_ALIVENESS_RESP_REG);
+ return reg & HICR_HOST_ALIVENESS_RESP_ACK;
+}
+
+/**
+ * mei_txe_aliveness_poll - waits for aliveness to settle
+ *
+ * @dev: the device structure
+ * @expected: expected aliveness value
+ *
+ * Polls for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set
+ *
+ * Return: 0 if the expected value was received, -ETIME otherwise
+ */
+static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ ktime_t stop, start;
+
+ start = ktime_get();
+ stop = ktime_add(start, ms_to_ktime(SEC_ALIVENESS_WAIT_TIMEOUT));
+ do {
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ if (hw->aliveness == expected) {
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ dev_dbg(dev->dev, "aliveness settled after %lld usecs\n",
+ ktime_to_us(ktime_sub(ktime_get(), start)));
+ return 0;
+ }
+ usleep_range(20, 50);
+ } while (ktime_before(ktime_get(), stop));
+
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ dev_err(dev->dev, "aliveness timed out\n");
+ return -ETIME;
+}
+
+/**
+ * mei_txe_aliveness_wait - waits for aliveness to settle
+ *
+ * @dev: the device structure
+ * @expected: expected aliveness value
+ *
+ * Waits for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set
+ *
+ * Return: 0 on success and < 0 otherwise
+ */
+static int mei_txe_aliveness_wait(struct mei_device *dev, u32 expected)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ const unsigned long timeout =
+ msecs_to_jiffies(SEC_ALIVENESS_WAIT_TIMEOUT);
+ long err;
+ int ret;
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ if (hw->aliveness == expected)
+ return 0;
+
+ mutex_unlock(&dev->device_lock);
+ err = wait_event_timeout(hw->wait_aliveness_resp,
+ dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
+ mutex_lock(&dev->device_lock);
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ ret = hw->aliveness == expected ? 0 : -ETIME;
+
+ if (ret)
+ dev_warn(dev->dev, "aliveness timed out = %ld aliveness = %d event = %d\n",
+ err, hw->aliveness, dev->pg_event);
+ else
+ dev_dbg(dev->dev, "aliveness settled after = %d msec aliveness = %d event = %d\n",
+ jiffies_to_msecs(timeout - err),
+ hw->aliveness, dev->pg_event);
+
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ return ret;
+}
+
+/**
+ * mei_txe_aliveness_set_sync - sets an wait for aliveness to complete
+ *
+ * @dev: the device structure
+ * @req: requested aliveness value
+ *
+ * Return: 0 on success and < 0 otherwise
+ */
+int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req)
+{
+ if (mei_txe_aliveness_set(dev, req))
+ return mei_txe_aliveness_wait(dev, req);
+ return 0;
+}
+
+/**
+ * mei_txe_pg_in_transition - is device now in pg transition
+ *
+ * @dev: the device structure
+ *
+ * Return: true if in pg transition, false otherwise
+ */
+static bool mei_txe_pg_in_transition(struct mei_device *dev)
+{
+ return dev->pg_event == MEI_PG_EVENT_WAIT;
+}
+
+/**
+ * mei_txe_pg_is_enabled - detect if PG is supported by HW
+ *
+ * @dev: the device structure
+ *
+ * Return: true is pg supported, false otherwise
+ */
+static bool mei_txe_pg_is_enabled(struct mei_device *dev)
+{
+ return true;
+}
+
+/**
+ * mei_txe_pg_state - translate aliveness register value
+ * to the mei power gating state
+ *
+ * @dev: the device structure
+ *
+ * Return: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise
+ */
+static inline enum mei_pg_state mei_txe_pg_state(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ return hw->aliveness ? MEI_PG_OFF : MEI_PG_ON;
+}
+
+/**
+ * mei_txe_input_ready_interrupt_enable - sets the Input Ready Interrupt
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_input_ready_interrupt_enable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 hintmsk;
+ /* Enable the SEC_IPC_HOST_INT_MASK_IN_RDY interrupt */
+ hintmsk = mei_txe_sec_reg_read(hw, SEC_IPC_HOST_INT_MASK_REG);
+ hintmsk |= SEC_IPC_HOST_INT_MASK_IN_RDY;
+ mei_txe_sec_reg_write(hw, SEC_IPC_HOST_INT_MASK_REG, hintmsk);
+}
+
+/**
+ * mei_txe_input_doorbell_set - sets bit 0 in
+ * SEC_IPC_INPUT_DOORBELL.IPC_INPUT_DOORBELL.
+ *
+ * @hw: the txe hardware structure
+ */
+static void mei_txe_input_doorbell_set(struct mei_txe_hw *hw)
+{
+ /* Clear the interrupt cause */
+ clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause);
+ mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_DOORBELL_REG, 1);
+}
+
+/**
+ * mei_txe_output_ready_set - Sets the SICR_SEC_IPC_OUTPUT_STATUS bit to 1
+ *
+ * @hw: the txe hardware structure
+ */
+static void mei_txe_output_ready_set(struct mei_txe_hw *hw)
+{
+ mei_txe_br_reg_write(hw,
+ SICR_SEC_IPC_OUTPUT_STATUS_REG,
+ SEC_IPC_OUTPUT_STATUS_RDY);
+}
+
+/**
+ * mei_txe_is_input_ready - check if TXE is ready for receiving data
+ *
+ * @dev: the device structure
+ *
+ * Return: true if INPUT STATUS READY bit is set
+ */
+static bool mei_txe_is_input_ready(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 status;
+
+ status = mei_txe_sec_reg_read(hw, SEC_IPC_INPUT_STATUS_REG);
+ return !!(SEC_IPC_INPUT_STATUS_RDY & status);
+}
+
+/**
+ * mei_txe_intr_clear - clear all interrupts
+ *
+ * @dev: the device structure
+ */
+static inline void mei_txe_intr_clear(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ mei_txe_sec_reg_write_silent(hw, SEC_IPC_HOST_INT_STATUS_REG,
+ SEC_IPC_HOST_INT_STATUS_PENDING);
+ mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_STS_MSK);
+ mei_txe_br_reg_write(hw, HHISR_REG, IPC_HHIER_MSK);
+}
+
+/**
+ * mei_txe_intr_disable - disable all interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_intr_disable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ mei_txe_br_reg_write(hw, HHIER_REG, 0);
+ mei_txe_br_reg_write(hw, HIER_REG, 0);
+}
+/**
+ * mei_txe_intr_enable - enable all interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_intr_enable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ mei_txe_br_reg_write(hw, HHIER_REG, IPC_HHIER_MSK);
+ mei_txe_br_reg_write(hw, HIER_REG, HIER_INT_EN_MSK);
+}
+
+/**
+ * mei_txe_synchronize_irq - wait for pending IRQ handlers
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_synchronize_irq(struct mei_device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+ synchronize_irq(pdev->irq);
+}
+
+/**
+ * mei_txe_pending_interrupts - check if there are pending interrupts
+ * only Aliveness, Input ready, and output doorbell are of relevance
+ *
+ * @dev: the device structure
+ *
+ * Checks if there are pending interrupts
+ * only Aliveness, Readiness, Input ready, and Output doorbell are relevant
+ *
+ * Return: true if there are pending interrupts
+ */
+static bool mei_txe_pending_interrupts(struct mei_device *dev)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ bool ret = (hw->intr_cause & (TXE_INTR_READINESS |
+ TXE_INTR_ALIVENESS |
+ TXE_INTR_IN_READY |
+ TXE_INTR_OUT_DB));
+
+ if (ret) {
+ dev_dbg(dev->dev,
+ "Pending Interrupts InReady=%01d Readiness=%01d, Aliveness=%01d, OutDoor=%01d\n",
+ !!(hw->intr_cause & TXE_INTR_IN_READY),
+ !!(hw->intr_cause & TXE_INTR_READINESS),
+ !!(hw->intr_cause & TXE_INTR_ALIVENESS),
+ !!(hw->intr_cause & TXE_INTR_OUT_DB));
+ }
+ return ret;
+}
+
+/**
+ * mei_txe_input_payload_write - write a dword to the host buffer
+ * at offset idx
+ *
+ * @dev: the device structure
+ * @idx: index in the host buffer
+ * @value: value
+ */
+static void mei_txe_input_payload_write(struct mei_device *dev,
+ unsigned long idx, u32 value)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_PAYLOAD_REG +
+ (idx * sizeof(u32)), value);
+}
+
+/**
+ * mei_txe_out_data_read - read dword from the device buffer
+ * at offset idx
+ *
+ * @dev: the device structure
+ * @idx: index in the device buffer
+ *
+ * Return: register value at index
+ */
+static u32 mei_txe_out_data_read(const struct mei_device *dev,
+ unsigned long idx)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ return mei_txe_br_reg_read(hw,
+ BRIDGE_IPC_OUTPUT_PAYLOAD_REG + (idx * sizeof(u32)));
+}
+
+/* Readiness */
+
+/**
+ * mei_txe_readiness_set_host_rdy - set host readiness bit
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_readiness_set_host_rdy(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ mei_txe_br_reg_write(hw,
+ SICR_HOST_IPC_READINESS_REQ_REG,
+ SICR_HOST_IPC_READINESS_HOST_RDY);
+}
+
+/**
+ * mei_txe_readiness_clear - clear host readiness bit
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_readiness_clear(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ mei_txe_br_reg_write(hw, SICR_HOST_IPC_READINESS_REQ_REG,
+ SICR_HOST_IPC_READINESS_RDY_CLR);
+}
+/**
+ * mei_txe_readiness_get - Reads and returns
+ * the HICR_SEC_IPC_READINESS register value
+ *
+ * @dev: the device structure
+ *
+ * Return: the HICR_SEC_IPC_READINESS register value
+ */
+static u32 mei_txe_readiness_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ return mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG);
+}
+
+
+/**
+ * mei_txe_readiness_is_sec_rdy - check readiness
+ * for HICR_SEC_IPC_READINESS_SEC_RDY
+ *
+ * @readiness: cached readiness state
+ *
+ * Return: true if readiness bit is set
+ */
+static inline bool mei_txe_readiness_is_sec_rdy(u32 readiness)
+{
+ return !!(readiness & HICR_SEC_IPC_READINESS_SEC_RDY);
+}
+
+/**
+ * mei_txe_hw_is_ready - check if the hw is ready
+ *
+ * @dev: the device structure
+ *
+ * Return: true if sec is ready
+ */
+static bool mei_txe_hw_is_ready(struct mei_device *dev)
+{
+ u32 readiness = mei_txe_readiness_get(dev);
+
+ return mei_txe_readiness_is_sec_rdy(readiness);
+}
+
+/**
+ * mei_txe_host_is_ready - check if the host is ready
+ *
+ * @dev: the device structure
+ *
+ * Return: true if host is ready
+ */
+static inline bool mei_txe_host_is_ready(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg = mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG);
+
+ return !!(reg & HICR_SEC_IPC_READINESS_HOST_RDY);
+}
+
+/**
+ * mei_txe_readiness_wait - wait till readiness settles
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success and -ETIME on timeout
+ */
+static int mei_txe_readiness_wait(struct mei_device *dev)
+{
+ if (mei_txe_hw_is_ready(dev))
+ return 0;
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_hw_ready, dev->recvd_hw_ready,
+ msecs_to_jiffies(SEC_RESET_WAIT_TIMEOUT));
+ mutex_lock(&dev->device_lock);
+ if (!dev->recvd_hw_ready) {
+ dev_err(dev->dev, "wait for readiness failed\n");
+ return -ETIME;
+ }
+
+ dev->recvd_hw_ready = false;
+ return 0;
+}
+
+static const struct mei_fw_status mei_txe_fw_sts = {
+ .count = 2,
+ .status[0] = PCI_CFG_TXE_FW_STS0,
+ .status[1] = PCI_CFG_TXE_FW_STS1
+};
+
+/**
+ * mei_txe_fw_status - read fw status register from pci config space
+ *
+ * @dev: mei device
+ * @fw_status: fw status register values
+ *
+ * Return: 0 on success, error otherwise
+ */
+static int mei_txe_fw_status(struct mei_device *dev,
+ struct mei_fw_status *fw_status)
+{
+ const struct mei_fw_status *fw_src = &mei_txe_fw_sts;
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+ int ret;
+ int i;
+
+ if (!fw_status)
+ return -EINVAL;
+
+ fw_status->count = fw_src->count;
+ for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) {
+ ret = pci_read_config_dword(pdev, fw_src->status[i],
+ &fw_status->status[i]);
+ trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HSF_X",
+ fw_src->status[i],
+ fw_status->status[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_txe_hw_config - configure hardware at the start of the devices
+ *
+ * @dev: the device structure
+ *
+ * Configure hardware at the start of the device should be done only
+ * once at the device probe time
+ */
+static void mei_txe_hw_config(struct mei_device *dev)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ hw->readiness = mei_txe_readiness_get(dev);
+
+ dev_dbg(dev->dev, "aliveness_resp = 0x%08x, readiness = 0x%08x.\n",
+ hw->aliveness, hw->readiness);
+}
+
+/**
+ * mei_txe_write - writes a message to device.
+ *
+ * @dev: the device structure
+ * @hdr: header of message
+ * @hdr_len: header length in bytes - must multiplication of a slot (4bytes)
+ * @data: payload
+ * @data_len: paylead length in bytes
+ *
+ * Return: 0 if success, < 0 - otherwise.
+ */
+static int mei_txe_write(struct mei_device *dev,
+ const void *hdr, size_t hdr_len,
+ const void *data, size_t data_len)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ unsigned long rem;
+ const u32 *reg_buf;
+ u32 slots = TXE_HBUF_DEPTH;
+ u32 dw_cnt;
+ unsigned long i, j;
+
+ if (WARN_ON(!hdr || !data || hdr_len & 0x3))
+ return -EINVAL;
+
+ dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM((struct mei_msg_hdr *)hdr));
+
+ dw_cnt = mei_data2slots(hdr_len + data_len);
+ if (dw_cnt > slots)
+ return -EMSGSIZE;
+
+ if (WARN(!hw->aliveness, "txe write: aliveness not asserted\n"))
+ return -EAGAIN;
+
+ /* Enable Input Ready Interrupt. */
+ mei_txe_input_ready_interrupt_enable(dev);
+
+ if (!mei_txe_is_input_ready(dev)) {
+ char fw_sts_str[MEI_FW_STATUS_STR_SZ];
+
+ mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ);
+ dev_err(dev->dev, "Input is not ready %s\n", fw_sts_str);
+ return -EAGAIN;
+ }
+
+ reg_buf = hdr;
+ for (i = 0; i < hdr_len / MEI_SLOT_SIZE; i++)
+ mei_txe_input_payload_write(dev, i, reg_buf[i]);
+
+ reg_buf = data;
+ for (j = 0; j < data_len / MEI_SLOT_SIZE; j++)
+ mei_txe_input_payload_write(dev, i + j, reg_buf[j]);
+
+ rem = data_len & 0x3;
+ if (rem > 0) {
+ u32 reg = 0;
+
+ memcpy(®, (const u8 *)data + data_len - rem, rem);
+ mei_txe_input_payload_write(dev, i + j, reg);
+ }
+
+ /* after each write the whole buffer is consumed */
+ hw->slots = 0;
+
+ /* Set Input-Doorbell */
+ mei_txe_input_doorbell_set(hw);
+
+ return 0;
+}
+
+/**
+ * mei_txe_hbuf_depth - mimics the me hbuf circular buffer
+ *
+ * @dev: the device structure
+ *
+ * Return: the TXE_HBUF_DEPTH
+ */
+static u32 mei_txe_hbuf_depth(const struct mei_device *dev)
+{
+ return TXE_HBUF_DEPTH;
+}
+
+/**
+ * mei_txe_hbuf_empty_slots - mimics the me hbuf circular buffer
+ *
+ * @dev: the device structure
+ *
+ * Return: always TXE_HBUF_DEPTH
+ */
+static int mei_txe_hbuf_empty_slots(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ return hw->slots;
+}
+
+/**
+ * mei_txe_count_full_read_slots - mimics the me device circular buffer
+ *
+ * @dev: the device structure
+ *
+ * Return: always buffer size in dwords count
+ */
+static int mei_txe_count_full_read_slots(struct mei_device *dev)
+{
+ /* read buffers has static size */
+ return TXE_HBUF_DEPTH;
+}
+
+/**
+ * mei_txe_read_hdr - read message header which is always in 4 first bytes
+ *
+ * @dev: the device structure
+ *
+ * Return: mei message header
+ */
+
+static u32 mei_txe_read_hdr(const struct mei_device *dev)
+{
+ return mei_txe_out_data_read(dev, 0);
+}
+/**
+ * mei_txe_read - reads a message from the txe device.
+ *
+ * @dev: the device structure
+ * @buf: message buffer will be written
+ * @len: message size will be read
+ *
+ * Return: -EINVAL on error wrong argument and 0 on success
+ */
+static int mei_txe_read(struct mei_device *dev,
+ unsigned char *buf, unsigned long len)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 *reg_buf, reg;
+ u32 rem;
+ u32 i;
+
+ if (WARN_ON(!buf || !len))
+ return -EINVAL;
+
+ reg_buf = (u32 *)buf;
+ rem = len & 0x3;
+
+ dev_dbg(dev->dev, "buffer-length = %lu buf[0]0x%08X\n",
+ len, mei_txe_out_data_read(dev, 0));
+
+ for (i = 0; i < len / MEI_SLOT_SIZE; i++) {
+ /* skip header: index starts from 1 */
+ reg = mei_txe_out_data_read(dev, i + 1);
+ dev_dbg(dev->dev, "buf[%d] = 0x%08X\n", i, reg);
+ *reg_buf++ = reg;
+ }
+
+ if (rem) {
+ reg = mei_txe_out_data_read(dev, i + 1);
+ memcpy(reg_buf, ®, rem);
+ }
+
+ mei_txe_output_ready_set(hw);
+ return 0;
+}
+
+/**
+ * mei_txe_hw_reset - resets host and fw.
+ *
+ * @dev: the device structure
+ * @intr_enable: if interrupt should be enabled after reset.
+ *
+ * Return: 0 on success and < 0 in case of error
+ */
+static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ u32 aliveness_req;
+ /*
+ * read input doorbell to ensure consistency between Bridge and SeC
+ * return value might be garbage return
+ */
+ (void)mei_txe_sec_reg_read_silent(hw, SEC_IPC_INPUT_DOORBELL_REG);
+
+ aliveness_req = mei_txe_aliveness_req_get(dev);
+ hw->aliveness = mei_txe_aliveness_get(dev);
+
+ /* Disable interrupts in this stage we will poll */
+ mei_txe_intr_disable(dev);
+
+ /*
+ * If Aliveness Request and Aliveness Response are not equal then
+ * wait for them to be equal
+ * Since we might have interrupts disabled - poll for it
+ */
+ if (aliveness_req != hw->aliveness)
+ if (mei_txe_aliveness_poll(dev, aliveness_req) < 0) {
+ dev_err(dev->dev, "wait for aliveness settle failed ... bailing out\n");
+ return -EIO;
+ }
+
+ /*
+ * If Aliveness Request and Aliveness Response are set then clear them
+ */
+ if (aliveness_req) {
+ mei_txe_aliveness_set(dev, 0);
+ if (mei_txe_aliveness_poll(dev, 0) < 0) {
+ dev_err(dev->dev, "wait for aliveness failed ... bailing out\n");
+ return -EIO;
+ }
+ }
+
+ /*
+ * Set readiness RDY_CLR bit
+ */
+ mei_txe_readiness_clear(dev);
+
+ return 0;
+}
+
+/**
+ * mei_txe_hw_start - start the hardware after reset
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_txe_hw_start(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ int ret;
+
+ u32 hisr;
+
+ /* bring back interrupts */
+ mei_txe_intr_enable(dev);
+
+ ret = mei_txe_readiness_wait(dev);
+ if (ret < 0) {
+ dev_err(dev->dev, "waiting for readiness failed\n");
+ return ret;
+ }
+
+ /*
+ * If HISR.INT2_STS interrupt status bit is set then clear it.
+ */
+ hisr = mei_txe_br_reg_read(hw, HISR_REG);
+ if (hisr & HISR_INT_2_STS)
+ mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_2_STS);
+
+ /* Clear the interrupt cause of OutputDoorbell */
+ clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause);
+
+ ret = mei_txe_aliveness_set_sync(dev, 1);
+ if (ret < 0) {
+ dev_err(dev->dev, "wait for aliveness failed ... bailing out\n");
+ return ret;
+ }
+
+ pm_runtime_set_active(dev->dev);
+
+ /* enable input ready interrupts:
+ * SEC_IPC_HOST_INT_MASK.IPC_INPUT_READY_INT_MASK
+ */
+ mei_txe_input_ready_interrupt_enable(dev);
+
+
+ /* Set the SICR_SEC_IPC_OUTPUT_STATUS.IPC_OUTPUT_READY bit */
+ mei_txe_output_ready_set(hw);
+
+ /* Set bit SICR_HOST_IPC_READINESS.HOST_RDY
+ */
+ mei_txe_readiness_set_host_rdy(dev);
+
+ return 0;
+}
+
+/**
+ * mei_txe_check_and_ack_intrs - translate multi BAR interrupt into
+ * single bit mask and acknowledge the interrupts
+ *
+ * @dev: the device structure
+ * @do_ack: acknowledge interrupts
+ *
+ * Return: true if found interrupts to process.
+ */
+static bool mei_txe_check_and_ack_intrs(struct mei_device *dev, bool do_ack)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 hisr;
+ u32 hhisr;
+ u32 ipc_isr;
+ u32 aliveness;
+ bool generated;
+
+ /* read interrupt registers */
+ hhisr = mei_txe_br_reg_read(hw, HHISR_REG);
+ generated = (hhisr & IPC_HHIER_MSK);
+ if (!generated)
+ goto out;
+
+ hisr = mei_txe_br_reg_read(hw, HISR_REG);
+
+ aliveness = mei_txe_aliveness_get(dev);
+ if (hhisr & IPC_HHIER_SEC && aliveness) {
+ ipc_isr = mei_txe_sec_reg_read_silent(hw,
+ SEC_IPC_HOST_INT_STATUS_REG);
+ } else {
+ ipc_isr = 0;
+ hhisr &= ~IPC_HHIER_SEC;
+ }
+
+ generated = generated ||
+ (hisr & HISR_INT_STS_MSK) ||
+ (ipc_isr & SEC_IPC_HOST_INT_STATUS_PENDING);
+
+ if (generated && do_ack) {
+ /* Save the interrupt causes */
+ hw->intr_cause |= hisr & HISR_INT_STS_MSK;
+ if (ipc_isr & SEC_IPC_HOST_INT_STATUS_IN_RDY)
+ hw->intr_cause |= TXE_INTR_IN_READY;
+
+
+ mei_txe_intr_disable(dev);
+ /* Clear the interrupts in hierarchy:
+ * IPC and Bridge, than the High Level */
+ mei_txe_sec_reg_write_silent(hw,
+ SEC_IPC_HOST_INT_STATUS_REG, ipc_isr);
+ mei_txe_br_reg_write(hw, HISR_REG, hisr);
+ mei_txe_br_reg_write(hw, HHISR_REG, hhisr);
+ }
+
+out:
+ return generated;
+}
+
+/**
+ * mei_txe_irq_quick_handler - The ISR of the MEI device
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * Return: IRQ_WAKE_THREAD if interrupt is designed for the device
+ * IRQ_NONE otherwise
+ */
+irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = dev_id;
+
+ if (mei_txe_check_and_ack_intrs(dev, true))
+ return IRQ_WAKE_THREAD;
+ return IRQ_NONE;
+}
+
+
+/**
+ * mei_txe_irq_thread_handler - txe interrupt thread
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * Return: IRQ_HANDLED
+ */
+irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = (struct mei_device *) dev_id;
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ struct list_head cmpl_list;
+ s32 slots;
+ int rets = 0;
+
+ dev_dbg(dev->dev, "irq thread: Interrupt Registers HHISR|HISR|SEC=%02X|%04X|%02X\n",
+ mei_txe_br_reg_read(hw, HHISR_REG),
+ mei_txe_br_reg_read(hw, HISR_REG),
+ mei_txe_sec_reg_read_silent(hw, SEC_IPC_HOST_INT_STATUS_REG));
+
+
+ /* initialize our complete list */
+ mutex_lock(&dev->device_lock);
+ INIT_LIST_HEAD(&cmpl_list);
+
+ if (pci_dev_msi_enabled(to_pci_dev(dev->dev)))
+ mei_txe_check_and_ack_intrs(dev, true);
+
+ /* show irq events */
+ mei_txe_pending_interrupts(dev);
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ hw->readiness = mei_txe_readiness_get(dev);
+
+ /* Readiness:
+ * Detection of TXE driver going through reset
+ * or TXE driver resetting the HECI interface.
+ */
+ if (test_and_clear_bit(TXE_INTR_READINESS_BIT, &hw->intr_cause)) {
+ dev_dbg(dev->dev, "Readiness Interrupt was received...\n");
+
+ /* Check if SeC is going through reset */
+ if (mei_txe_readiness_is_sec_rdy(hw->readiness)) {
+ dev_dbg(dev->dev, "we need to start the dev.\n");
+ dev->recvd_hw_ready = true;
+ } else {
+ dev->recvd_hw_ready = false;
+ if (dev->dev_state != MEI_DEV_RESETTING) {
+
+ dev_warn(dev->dev, "FW not ready: resetting.\n");
+ schedule_work(&dev->reset_work);
+ goto end;
+
+ }
+ }
+ wake_up(&dev->wait_hw_ready);
+ }
+
+ /************************************************************/
+ /* Check interrupt cause:
+ * Aliveness: Detection of SeC acknowledge of host request that
+ * it remain alive or host cancellation of that request.
+ */
+
+ if (test_and_clear_bit(TXE_INTR_ALIVENESS_BIT, &hw->intr_cause)) {
+ /* Clear the interrupt cause */
+ dev_dbg(dev->dev,
+ "Aliveness Interrupt: Status: %d\n", hw->aliveness);
+ dev->pg_event = MEI_PG_EVENT_RECEIVED;
+ if (waitqueue_active(&hw->wait_aliveness_resp))
+ wake_up(&hw->wait_aliveness_resp);
+ }
+
+
+ /* Output Doorbell:
+ * Detection of SeC having sent output to host
+ */
+ slots = mei_count_full_read_slots(dev);
+ if (test_and_clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause)) {
+ /* Read from TXE */
+ rets = mei_irq_read_handler(dev, &cmpl_list, &slots);
+ if (rets &&
+ (dev->dev_state != MEI_DEV_RESETTING &&
+ dev->dev_state != MEI_DEV_POWER_DOWN)) {
+ dev_err(dev->dev,
+ "mei_irq_read_handler ret = %d.\n", rets);
+
+ schedule_work(&dev->reset_work);
+ goto end;
+ }
+ }
+ /* Input Ready: Detection if host can write to SeC */
+ if (test_and_clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause)) {
+ dev->hbuf_is_ready = true;
+ hw->slots = TXE_HBUF_DEPTH;
+ }
+
+ if (hw->aliveness && dev->hbuf_is_ready) {
+ /* get the real register value */
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+ rets = mei_irq_write_handler(dev, &cmpl_list);
+ if (rets && rets != -EMSGSIZE)
+ dev_err(dev->dev, "mei_irq_write_handler ret = %d.\n",
+ rets);
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+ }
+
+ mei_irq_compl_handler(dev, &cmpl_list);
+
+end:
+ dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets);
+
+ mutex_unlock(&dev->device_lock);
+
+ mei_enable_interrupts(dev);
+ return IRQ_HANDLED;
+}
+
+static const struct mei_hw_ops mei_txe_hw_ops = {
+
+ .host_is_ready = mei_txe_host_is_ready,
+
+ .fw_status = mei_txe_fw_status,
+ .pg_state = mei_txe_pg_state,
+
+ .hw_is_ready = mei_txe_hw_is_ready,
+ .hw_reset = mei_txe_hw_reset,
+ .hw_config = mei_txe_hw_config,
+ .hw_start = mei_txe_hw_start,
+
+ .pg_in_transition = mei_txe_pg_in_transition,
+ .pg_is_enabled = mei_txe_pg_is_enabled,
+
+ .intr_clear = mei_txe_intr_clear,
+ .intr_enable = mei_txe_intr_enable,
+ .intr_disable = mei_txe_intr_disable,
+ .synchronize_irq = mei_txe_synchronize_irq,
+
+ .hbuf_free_slots = mei_txe_hbuf_empty_slots,
+ .hbuf_is_ready = mei_txe_is_input_ready,
+ .hbuf_depth = mei_txe_hbuf_depth,
+
+ .write = mei_txe_write,
+
+ .rdbuf_full_slots = mei_txe_count_full_read_slots,
+ .read_hdr = mei_txe_read_hdr,
+
+ .read = mei_txe_read,
+
+};
+
+/**
+ * mei_txe_dev_init - allocates and initializes txe hardware specific structure
+ *
+ * @pdev: pci device
+ *
+ * Return: struct mei_device * on success or NULL
+ */
+struct mei_device *mei_txe_dev_init(struct pci_dev *pdev)
+{
+ struct mei_device *dev;
+ struct mei_txe_hw *hw;
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(struct mei_device) +
+ sizeof(struct mei_txe_hw), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ mei_device_init(dev, &pdev->dev, &mei_txe_hw_ops);
+
+ hw = to_txe_hw(dev);
+
+ init_waitqueue_head(&hw->wait_aliveness_resp);
+
+ return dev;
+}
+
+/**
+ * mei_txe_setup_satt2 - SATT2 configuration for DMA support.
+ *
+ * @dev: the device structure
+ * @addr: physical address start of the range
+ * @range: physical range size
+ *
+ * Return: 0 on success an error code otherwise
+ */
+int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ u32 lo32 = lower_32_bits(addr);
+ u32 hi32 = upper_32_bits(addr);
+ u32 ctrl;
+
+ /* SATT is limited to 36 Bits */
+ if (hi32 & ~0xF)
+ return -EINVAL;
+
+ /* SATT has to be 16Byte aligned */
+ if (lo32 & 0xF)
+ return -EINVAL;
+
+ /* SATT range has to be 4Bytes aligned */
+ if (range & 0x4)
+ return -EINVAL;
+
+ /* SATT is limited to 32 MB range*/
+ if (range > SATT_RANGE_MAX)
+ return -EINVAL;
+
+ ctrl = SATT2_CTRL_VALID_MSK;
+ ctrl |= hi32 << SATT2_CTRL_BR_BASE_ADDR_REG_SHIFT;
+
+ mei_txe_br_reg_write(hw, SATT2_SAP_SIZE_REG, range);
+ mei_txe_br_reg_write(hw, SATT2_BRG_BA_LSB_REG, lo32);
+ mei_txe_br_reg_write(hw, SATT2_CTRL_REG, ctrl);
+ dev_dbg(dev->dev, "SATT2: SAP_SIZE_OFFSET=0x%08X, BRG_BA_LSB_OFFSET=0x%08X, CTRL_OFFSET=0x%08X\n",
+ range, lo32, ctrl);
+
+ return 0;
+}
diff --git a/drivers/misc/mei/hw-txe.h b/drivers/misc/mei/hw-txe.h
new file mode 100644
index 0000000..e1e8b66
--- /dev/null
+++ b/drivers/misc/mei/hw-txe.h
@@ -0,0 +1,75 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2013-2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _MEI_HW_TXE_H_
+#define _MEI_HW_TXE_H_
+
+#include <linux/irqreturn.h>
+
+#include "hw.h"
+#include "hw-txe-regs.h"
+
+#define MEI_TXI_RPM_TIMEOUT 500 /* ms */
+
+/* Flatten Hierarchy interrupt cause */
+#define TXE_INTR_READINESS_BIT 0 /* HISR_INT_0_STS */
+#define TXE_INTR_READINESS HISR_INT_0_STS
+#define TXE_INTR_ALIVENESS_BIT 1 /* HISR_INT_1_STS */
+#define TXE_INTR_ALIVENESS HISR_INT_1_STS
+#define TXE_INTR_OUT_DB_BIT 2 /* HISR_INT_2_STS */
+#define TXE_INTR_OUT_DB HISR_INT_2_STS
+#define TXE_INTR_IN_READY_BIT 8 /* beyond HISR */
+#define TXE_INTR_IN_READY BIT(8)
+
+/**
+ * struct mei_txe_hw - txe hardware specifics
+ *
+ * @mem_addr: SeC and BRIDGE bars
+ * @aliveness: aliveness (power gating) state of the hardware
+ * @readiness: readiness state of the hardware
+ * @slots: number of empty slots
+ * @wait_aliveness_resp: aliveness wait queue
+ * @intr_cause: translated interrupt cause
+ */
+struct mei_txe_hw {
+ void __iomem * const *mem_addr;
+ u32 aliveness;
+ u32 readiness;
+ u32 slots;
+
+ wait_queue_head_t wait_aliveness_resp;
+
+ unsigned long intr_cause;
+};
+
+#define to_txe_hw(dev) (struct mei_txe_hw *)((dev)->hw)
+
+static inline struct mei_device *hw_txe_to_mei(struct mei_txe_hw *hw)
+{
+ return container_of((void *)hw, struct mei_device, hw);
+}
+
+struct mei_device *mei_txe_dev_init(struct pci_dev *pdev);
+
+irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id);
+irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id);
+
+int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req);
+
+int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range);
+
+
+#endif /* _MEI_HW_TXE_H_ */
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
new file mode 100644
index 0000000..6565592
--- /dev/null
+++ b/drivers/misc/mei/hw.h
@@ -0,0 +1,515 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _MEI_HW_TYPES_H_
+#define _MEI_HW_TYPES_H_
+
+#include <linux/uuid.h>
+
+/*
+ * Timeouts in Seconds
+ */
+#define MEI_HW_READY_TIMEOUT 2 /* Timeout on ready message */
+#define MEI_CONNECT_TIMEOUT 3 /* HPS: at least 2 seconds */
+
+#define MEI_CL_CONNECT_TIMEOUT 15 /* HPS: Client Connect Timeout */
+#define MEI_CLIENTS_INIT_TIMEOUT 15 /* HPS: Clients Enumeration Timeout */
+
+#define MEI_PGI_TIMEOUT 1 /* PG Isolation time response 1 sec */
+#define MEI_D0I3_TIMEOUT 5 /* D0i3 set/unset max response time */
+#define MEI_HBM_TIMEOUT 1 /* 1 second */
+
+/*
+ * MEI Version
+ */
+#define HBM_MINOR_VERSION 0
+#define HBM_MAJOR_VERSION 2
+
+/*
+ * MEI version with PGI support
+ */
+#define HBM_MINOR_VERSION_PGI 1
+#define HBM_MAJOR_VERSION_PGI 1
+
+/*
+ * MEI version with Dynamic clients support
+ */
+#define HBM_MINOR_VERSION_DC 0
+#define HBM_MAJOR_VERSION_DC 2
+
+/*
+ * MEI version with immediate reply to enum request support
+ */
+#define HBM_MINOR_VERSION_IE 0
+#define HBM_MAJOR_VERSION_IE 2
+
+/*
+ * MEI version with disconnect on connection timeout support
+ */
+#define HBM_MINOR_VERSION_DOT 0
+#define HBM_MAJOR_VERSION_DOT 2
+
+/*
+ * MEI version with notification support
+ */
+#define HBM_MINOR_VERSION_EV 0
+#define HBM_MAJOR_VERSION_EV 2
+
+/*
+ * MEI version with fixed address client support
+ */
+#define HBM_MINOR_VERSION_FA 0
+#define HBM_MAJOR_VERSION_FA 2
+
+/*
+ * MEI version with OS ver message support
+ */
+#define HBM_MINOR_VERSION_OS 0
+#define HBM_MAJOR_VERSION_OS 2
+
+/*
+ * MEI version with dma ring support
+ */
+#define HBM_MINOR_VERSION_DR 1
+#define HBM_MAJOR_VERSION_DR 2
+
+/* Host bus message command opcode */
+#define MEI_HBM_CMD_OP_MSK 0x7f
+/* Host bus message command RESPONSE */
+#define MEI_HBM_CMD_RES_MSK 0x80
+
+/*
+ * MEI Bus Message Command IDs
+ */
+#define HOST_START_REQ_CMD 0x01
+#define HOST_START_RES_CMD 0x81
+
+#define HOST_STOP_REQ_CMD 0x02
+#define HOST_STOP_RES_CMD 0x82
+
+#define ME_STOP_REQ_CMD 0x03
+
+#define HOST_ENUM_REQ_CMD 0x04
+#define HOST_ENUM_RES_CMD 0x84
+
+#define HOST_CLIENT_PROPERTIES_REQ_CMD 0x05
+#define HOST_CLIENT_PROPERTIES_RES_CMD 0x85
+
+#define CLIENT_CONNECT_REQ_CMD 0x06
+#define CLIENT_CONNECT_RES_CMD 0x86
+
+#define CLIENT_DISCONNECT_REQ_CMD 0x07
+#define CLIENT_DISCONNECT_RES_CMD 0x87
+
+#define MEI_FLOW_CONTROL_CMD 0x08
+
+#define MEI_PG_ISOLATION_ENTRY_REQ_CMD 0x0a
+#define MEI_PG_ISOLATION_ENTRY_RES_CMD 0x8a
+#define MEI_PG_ISOLATION_EXIT_REQ_CMD 0x0b
+#define MEI_PG_ISOLATION_EXIT_RES_CMD 0x8b
+
+#define MEI_HBM_ADD_CLIENT_REQ_CMD 0x0f
+#define MEI_HBM_ADD_CLIENT_RES_CMD 0x8f
+
+#define MEI_HBM_NOTIFY_REQ_CMD 0x10
+#define MEI_HBM_NOTIFY_RES_CMD 0x90
+#define MEI_HBM_NOTIFICATION_CMD 0x11
+
+#define MEI_HBM_DMA_SETUP_REQ_CMD 0x12
+#define MEI_HBM_DMA_SETUP_RES_CMD 0x92
+
+/*
+ * MEI Stop Reason
+ * used by hbm_host_stop_request.reason
+ */
+enum mei_stop_reason_types {
+ DRIVER_STOP_REQUEST = 0x00,
+ DEVICE_D1_ENTRY = 0x01,
+ DEVICE_D2_ENTRY = 0x02,
+ DEVICE_D3_ENTRY = 0x03,
+ SYSTEM_S1_ENTRY = 0x04,
+ SYSTEM_S2_ENTRY = 0x05,
+ SYSTEM_S3_ENTRY = 0x06,
+ SYSTEM_S4_ENTRY = 0x07,
+ SYSTEM_S5_ENTRY = 0x08
+};
+
+
+/**
+ * enum mei_hbm_status - mei host bus messages return values
+ *
+ * @MEI_HBMS_SUCCESS : status success
+ * @MEI_HBMS_CLIENT_NOT_FOUND : client not found
+ * @MEI_HBMS_ALREADY_EXISTS : connection already established
+ * @MEI_HBMS_REJECTED : connection is rejected
+ * @MEI_HBMS_INVALID_PARAMETER : invalid parameter
+ * @MEI_HBMS_NOT_ALLOWED : operation not allowed
+ * @MEI_HBMS_ALREADY_STARTED : system is already started
+ * @MEI_HBMS_NOT_STARTED : system not started
+ *
+ * @MEI_HBMS_MAX : sentinel
+ */
+enum mei_hbm_status {
+ MEI_HBMS_SUCCESS = 0,
+ MEI_HBMS_CLIENT_NOT_FOUND = 1,
+ MEI_HBMS_ALREADY_EXISTS = 2,
+ MEI_HBMS_REJECTED = 3,
+ MEI_HBMS_INVALID_PARAMETER = 4,
+ MEI_HBMS_NOT_ALLOWED = 5,
+ MEI_HBMS_ALREADY_STARTED = 6,
+ MEI_HBMS_NOT_STARTED = 7,
+
+ MEI_HBMS_MAX
+};
+
+
+/*
+ * Client Connect Status
+ * used by hbm_client_connect_response.status
+ */
+enum mei_cl_connect_status {
+ MEI_CL_CONN_SUCCESS = MEI_HBMS_SUCCESS,
+ MEI_CL_CONN_NOT_FOUND = MEI_HBMS_CLIENT_NOT_FOUND,
+ MEI_CL_CONN_ALREADY_STARTED = MEI_HBMS_ALREADY_EXISTS,
+ MEI_CL_CONN_OUT_OF_RESOURCES = MEI_HBMS_REJECTED,
+ MEI_CL_CONN_MESSAGE_SMALL = MEI_HBMS_INVALID_PARAMETER,
+ MEI_CL_CONN_NOT_ALLOWED = MEI_HBMS_NOT_ALLOWED,
+};
+
+/*
+ * Client Disconnect Status
+ */
+enum mei_cl_disconnect_status {
+ MEI_CL_DISCONN_SUCCESS = MEI_HBMS_SUCCESS
+};
+
+/**
+ * struct mei_msg_hdr - MEI BUS Interface Section
+ *
+ * @me_addr: device address
+ * @host_addr: host address
+ * @length: message length
+ * @reserved: reserved
+ * @dma_ring: message is on dma ring
+ * @internal: message is internal
+ * @msg_complete: last packet of the message
+ */
+struct mei_msg_hdr {
+ u32 me_addr:8;
+ u32 host_addr:8;
+ u32 length:9;
+ u32 reserved:4;
+ u32 dma_ring:1;
+ u32 internal:1;
+ u32 msg_complete:1;
+} __packed;
+
+struct mei_bus_message {
+ u8 hbm_cmd;
+ u8 data[0];
+} __packed;
+
+/**
+ * struct hbm_cl_cmd - client specific host bus command
+ * CONNECT, DISCONNECT, and FlOW CONTROL
+ *
+ * @hbm_cmd: bus message command header
+ * @me_addr: address of the client in ME
+ * @host_addr: address of the client in the driver
+ * @data: generic data
+ */
+struct mei_hbm_cl_cmd {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 host_addr;
+ u8 data;
+};
+
+struct hbm_version {
+ u8 minor_version;
+ u8 major_version;
+} __packed;
+
+struct hbm_host_version_request {
+ u8 hbm_cmd;
+ u8 reserved;
+ struct hbm_version host_version;
+} __packed;
+
+struct hbm_host_version_response {
+ u8 hbm_cmd;
+ u8 host_version_supported;
+ struct hbm_version me_max_version;
+} __packed;
+
+struct hbm_host_stop_request {
+ u8 hbm_cmd;
+ u8 reason;
+ u8 reserved[2];
+} __packed;
+
+struct hbm_host_stop_response {
+ u8 hbm_cmd;
+ u8 reserved[3];
+} __packed;
+
+struct hbm_me_stop_request {
+ u8 hbm_cmd;
+ u8 reason;
+ u8 reserved[2];
+} __packed;
+
+/**
+ * enum hbm_host_enum_flags - enumeration request flags (HBM version >= 2.0)
+ *
+ * @MEI_HBM_ENUM_F_ALLOW_ADD: allow dynamic clients add
+ * @MEI_HBM_ENUM_F_IMMEDIATE_ENUM: allow FW to send answer immediately
+ */
+enum hbm_host_enum_flags {
+ MEI_HBM_ENUM_F_ALLOW_ADD = BIT(0),
+ MEI_HBM_ENUM_F_IMMEDIATE_ENUM = BIT(1),
+};
+
+/**
+ * struct hbm_host_enum_request - enumeration request from host to fw
+ *
+ * @hbm_cmd : bus message command header
+ * @flags : request flags
+ * @reserved: reserved
+ */
+struct hbm_host_enum_request {
+ u8 hbm_cmd;
+ u8 flags;
+ u8 reserved[2];
+} __packed;
+
+struct hbm_host_enum_response {
+ u8 hbm_cmd;
+ u8 reserved[3];
+ u8 valid_addresses[32];
+} __packed;
+
+struct mei_client_properties {
+ uuid_le protocol_name;
+ u8 protocol_version;
+ u8 max_number_of_connections;
+ u8 fixed_address;
+ u8 single_recv_buf;
+ u32 max_msg_length;
+} __packed;
+
+struct hbm_props_request {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 reserved[2];
+} __packed;
+
+struct hbm_props_response {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 status;
+ u8 reserved[1];
+ struct mei_client_properties client_properties;
+} __packed;
+
+/**
+ * struct hbm_add_client_request - request to add a client
+ * might be sent by fw after enumeration has already completed
+ *
+ * @hbm_cmd: bus message command header
+ * @me_addr: address of the client in ME
+ * @reserved: reserved
+ * @client_properties: client properties
+ */
+struct hbm_add_client_request {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 reserved[2];
+ struct mei_client_properties client_properties;
+} __packed;
+
+/**
+ * struct hbm_add_client_response - response to add a client
+ * sent by the host to report client addition status to fw
+ *
+ * @hbm_cmd: bus message command header
+ * @me_addr: address of the client in ME
+ * @status: if HBMS_SUCCESS then the client can now accept connections.
+ * @reserved: reserved
+ */
+struct hbm_add_client_response {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 status;
+ u8 reserved[1];
+} __packed;
+
+/**
+ * struct hbm_power_gate - power gate request/response
+ *
+ * @hbm_cmd: bus message command header
+ * @reserved: reserved
+ */
+struct hbm_power_gate {
+ u8 hbm_cmd;
+ u8 reserved[3];
+} __packed;
+
+/**
+ * struct hbm_client_connect_request - connect/disconnect request
+ *
+ * @hbm_cmd: bus message command header
+ * @me_addr: address of the client in ME
+ * @host_addr: address of the client in the driver
+ * @reserved: reserved
+ */
+struct hbm_client_connect_request {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 host_addr;
+ u8 reserved;
+} __packed;
+
+/**
+ * struct hbm_client_connect_response - connect/disconnect response
+ *
+ * @hbm_cmd: bus message command header
+ * @me_addr: address of the client in ME
+ * @host_addr: address of the client in the driver
+ * @status: status of the request
+ */
+struct hbm_client_connect_response {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 host_addr;
+ u8 status;
+} __packed;
+
+
+#define MEI_FC_MESSAGE_RESERVED_LENGTH 5
+
+struct hbm_flow_control {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 host_addr;
+ u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH];
+} __packed;
+
+#define MEI_HBM_NOTIFICATION_START 1
+#define MEI_HBM_NOTIFICATION_STOP 0
+/**
+ * struct hbm_notification_request - start/stop notification request
+ *
+ * @hbm_cmd: bus message command header
+ * @me_addr: address of the client in ME
+ * @host_addr: address of the client in the driver
+ * @start: start = 1 or stop = 0 asynchronous notifications
+ */
+struct hbm_notification_request {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 host_addr;
+ u8 start;
+} __packed;
+
+/**
+ * struct hbm_notification_response - start/stop notification response
+ *
+ * @hbm_cmd: bus message command header
+ * @me_addr: address of the client in ME
+ * @host_addr: - address of the client in the driver
+ * @status: (mei_hbm_status) response status for the request
+ * - MEI_HBMS_SUCCESS: successful stop/start
+ * - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found.
+ * - MEI_HBMS_ALREADY_STARTED: for start requests for a previously
+ * started notification.
+ * - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom
+ * asynchronous notifications are currently disabled.
+ *
+ * @start: start = 1 or stop = 0 asynchronous notifications
+ * @reserved: reserved
+ */
+struct hbm_notification_response {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 host_addr;
+ u8 status;
+ u8 start;
+ u8 reserved[3];
+} __packed;
+
+/**
+ * struct hbm_notification - notification event
+ *
+ * @hbm_cmd: bus message command header
+ * @me_addr: address of the client in ME
+ * @host_addr: address of the client in the driver
+ * @reserved: reserved for alignment
+ */
+struct hbm_notification {
+ u8 hbm_cmd;
+ u8 me_addr;
+ u8 host_addr;
+ u8 reserved[1];
+} __packed;
+
+/**
+ * struct hbm_dma_mem_dscr - dma ring
+ *
+ * @addr_hi: the high 32bits of 64 bit address
+ * @addr_lo: the low 32bits of 64 bit address
+ * @size : size in bytes (must be power of 2)
+ */
+struct hbm_dma_mem_dscr {
+ u32 addr_hi;
+ u32 addr_lo;
+ u32 size;
+} __packed;
+
+enum {
+ DMA_DSCR_HOST = 0,
+ DMA_DSCR_DEVICE = 1,
+ DMA_DSCR_CTRL = 2,
+ DMA_DSCR_NUM,
+};
+
+/**
+ * struct hbm_dma_setup_request - dma setup request
+ *
+ * @hbm_cmd: bus message command header
+ * @reserved: reserved for alignment
+ * @dma_dscr: dma descriptor for HOST, DEVICE, and CTRL
+ */
+struct hbm_dma_setup_request {
+ u8 hbm_cmd;
+ u8 reserved[3];
+ struct hbm_dma_mem_dscr dma_dscr[DMA_DSCR_NUM];
+} __packed;
+
+/**
+ * struct hbm_dma_setup_response - dma setup response
+ *
+ * @hbm_cmd: bus message command header
+ * @status: 0 on success; otherwise DMA setup failed.
+ * @reserved: reserved for alignment
+ */
+struct hbm_dma_setup_response {
+ u8 hbm_cmd;
+ u8 status;
+ u8 reserved[2];
+} __packed;
+
+#endif
diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
new file mode 100644
index 0000000..4888ebc
--- /dev/null
+++ b/drivers/misc/mei/init.c
@@ -0,0 +1,406 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "hbm.h"
+#include "client.h"
+
+const char *mei_dev_state_str(int state)
+{
+#define MEI_DEV_STATE(state) case MEI_DEV_##state: return #state
+ switch (state) {
+ MEI_DEV_STATE(INITIALIZING);
+ MEI_DEV_STATE(INIT_CLIENTS);
+ MEI_DEV_STATE(ENABLED);
+ MEI_DEV_STATE(RESETTING);
+ MEI_DEV_STATE(DISABLED);
+ MEI_DEV_STATE(POWER_DOWN);
+ MEI_DEV_STATE(POWER_UP);
+ default:
+ return "unknown";
+ }
+#undef MEI_DEV_STATE
+}
+
+const char *mei_pg_state_str(enum mei_pg_state state)
+{
+#define MEI_PG_STATE(state) case MEI_PG_##state: return #state
+ switch (state) {
+ MEI_PG_STATE(OFF);
+ MEI_PG_STATE(ON);
+ default:
+ return "unknown";
+ }
+#undef MEI_PG_STATE
+}
+
+/**
+ * mei_fw_status2str - convert fw status registers to printable string
+ *
+ * @fw_status: firmware status
+ * @buf: string buffer at minimal size MEI_FW_STATUS_STR_SZ
+ * @len: buffer len must be >= MEI_FW_STATUS_STR_SZ
+ *
+ * Return: number of bytes written or -EINVAL if buffer is to small
+ */
+ssize_t mei_fw_status2str(struct mei_fw_status *fw_status,
+ char *buf, size_t len)
+{
+ ssize_t cnt = 0;
+ int i;
+
+ buf[0] = '\0';
+
+ if (len < MEI_FW_STATUS_STR_SZ)
+ return -EINVAL;
+
+ for (i = 0; i < fw_status->count; i++)
+ cnt += scnprintf(buf + cnt, len - cnt, "%08X ",
+ fw_status->status[i]);
+
+ /* drop last space */
+ buf[cnt] = '\0';
+ return cnt;
+}
+EXPORT_SYMBOL_GPL(mei_fw_status2str);
+
+/**
+ * mei_cancel_work - Cancel mei background jobs
+ *
+ * @dev: the device structure
+ */
+void mei_cancel_work(struct mei_device *dev)
+{
+ cancel_work_sync(&dev->reset_work);
+ cancel_work_sync(&dev->bus_rescan_work);
+
+ cancel_delayed_work_sync(&dev->timer_work);
+}
+EXPORT_SYMBOL_GPL(mei_cancel_work);
+
+/**
+ * mei_reset - resets host and fw.
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success or < 0 if the reset hasn't succeeded
+ */
+int mei_reset(struct mei_device *dev)
+{
+ enum mei_dev_state state = dev->dev_state;
+ bool interrupts_enabled;
+ int ret;
+
+ if (state != MEI_DEV_INITIALIZING &&
+ state != MEI_DEV_DISABLED &&
+ state != MEI_DEV_POWER_DOWN &&
+ state != MEI_DEV_POWER_UP) {
+ char fw_sts_str[MEI_FW_STATUS_STR_SZ];
+
+ mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ);
+ dev_warn(dev->dev, "unexpected reset: dev_state = %s fw status = %s\n",
+ mei_dev_state_str(state), fw_sts_str);
+ }
+
+ mei_clear_interrupts(dev);
+
+ /* we're already in reset, cancel the init timer
+ * if the reset was called due the hbm protocol error
+ * we need to call it before hw start
+ * so the hbm watchdog won't kick in
+ */
+ mei_hbm_idle(dev);
+
+ /* enter reset flow */
+ interrupts_enabled = state != MEI_DEV_POWER_DOWN;
+ dev->dev_state = MEI_DEV_RESETTING;
+
+ dev->reset_count++;
+ if (dev->reset_count > MEI_MAX_CONSEC_RESET) {
+ dev_err(dev->dev, "reset: reached maximal consecutive resets: disabling the device\n");
+ dev->dev_state = MEI_DEV_DISABLED;
+ return -ENODEV;
+ }
+
+ ret = mei_hw_reset(dev, interrupts_enabled);
+ /* fall through and remove the sw state even if hw reset has failed */
+
+ /* no need to clean up software state in case of power up */
+ if (state != MEI_DEV_INITIALIZING && state != MEI_DEV_POWER_UP)
+ mei_cl_all_disconnect(dev);
+
+ mei_hbm_reset(dev);
+
+ dev->rd_msg_hdr = 0;
+
+ if (ret) {
+ dev_err(dev->dev, "hw_reset failed ret = %d\n", ret);
+ return ret;
+ }
+
+ if (state == MEI_DEV_POWER_DOWN) {
+ dev_dbg(dev->dev, "powering down: end of reset\n");
+ dev->dev_state = MEI_DEV_DISABLED;
+ return 0;
+ }
+
+ ret = mei_hw_start(dev);
+ if (ret) {
+ dev_err(dev->dev, "hw_start failed ret = %d\n", ret);
+ return ret;
+ }
+
+ dev_dbg(dev->dev, "link is established start sending messages.\n");
+
+ dev->dev_state = MEI_DEV_INIT_CLIENTS;
+ ret = mei_hbm_start_req(dev);
+ if (ret) {
+ dev_err(dev->dev, "hbm_start failed ret = %d\n", ret);
+ dev->dev_state = MEI_DEV_RESETTING;
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mei_reset);
+
+/**
+ * mei_start - initializes host and fw to start work.
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+int mei_start(struct mei_device *dev)
+{
+ int ret;
+
+ mutex_lock(&dev->device_lock);
+
+ /* acknowledge interrupt and stop interrupts */
+ mei_clear_interrupts(dev);
+
+ mei_hw_config(dev);
+
+ dev_dbg(dev->dev, "reset in start the mei device.\n");
+
+ dev->reset_count = 0;
+ do {
+ dev->dev_state = MEI_DEV_INITIALIZING;
+ ret = mei_reset(dev);
+
+ if (ret == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
+ dev_err(dev->dev, "reset failed ret = %d", ret);
+ goto err;
+ }
+ } while (ret);
+
+ if (mei_hbm_start_wait(dev)) {
+ dev_err(dev->dev, "HBM haven't started");
+ goto err;
+ }
+
+ if (!mei_host_is_ready(dev)) {
+ dev_err(dev->dev, "host is not ready.\n");
+ goto err;
+ }
+
+ if (!mei_hw_is_ready(dev)) {
+ dev_err(dev->dev, "ME is not ready.\n");
+ goto err;
+ }
+
+ if (!mei_hbm_version_is_supported(dev)) {
+ dev_dbg(dev->dev, "MEI start failed.\n");
+ goto err;
+ }
+
+ dev_dbg(dev->dev, "link layer has been established.\n");
+
+ mutex_unlock(&dev->device_lock);
+ return 0;
+err:
+ dev_err(dev->dev, "link layer initialization failed.\n");
+ dev->dev_state = MEI_DEV_DISABLED;
+ mutex_unlock(&dev->device_lock);
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(mei_start);
+
+/**
+ * mei_restart - restart device after suspend
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success or -ENODEV if the restart hasn't succeeded
+ */
+int mei_restart(struct mei_device *dev)
+{
+ int err;
+
+ mutex_lock(&dev->device_lock);
+
+ dev->dev_state = MEI_DEV_POWER_UP;
+ dev->reset_count = 0;
+
+ err = mei_reset(dev);
+
+ mutex_unlock(&dev->device_lock);
+
+ if (err == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
+ dev_err(dev->dev, "device disabled = %d\n", err);
+ return -ENODEV;
+ }
+
+ /* try to start again */
+ if (err)
+ schedule_work(&dev->reset_work);
+
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mei_restart);
+
+static void mei_reset_work(struct work_struct *work)
+{
+ struct mei_device *dev =
+ container_of(work, struct mei_device, reset_work);
+ int ret;
+
+ mei_clear_interrupts(dev);
+ mei_synchronize_irq(dev);
+
+ mutex_lock(&dev->device_lock);
+
+ ret = mei_reset(dev);
+
+ mutex_unlock(&dev->device_lock);
+
+ if (dev->dev_state == MEI_DEV_DISABLED) {
+ dev_err(dev->dev, "device disabled = %d\n", ret);
+ return;
+ }
+
+ /* retry reset in case of failure */
+ if (ret)
+ schedule_work(&dev->reset_work);
+}
+
+void mei_stop(struct mei_device *dev)
+{
+ dev_dbg(dev->dev, "stopping the device.\n");
+
+ mutex_lock(&dev->device_lock);
+ dev->dev_state = MEI_DEV_POWER_DOWN;
+ mutex_unlock(&dev->device_lock);
+ mei_cl_bus_remove_devices(dev);
+
+ mei_cancel_work(dev);
+
+ mei_clear_interrupts(dev);
+ mei_synchronize_irq(dev);
+
+ mutex_lock(&dev->device_lock);
+
+ mei_reset(dev);
+ /* move device to disabled state unconditionally */
+ dev->dev_state = MEI_DEV_DISABLED;
+
+ mutex_unlock(&dev->device_lock);
+}
+EXPORT_SYMBOL_GPL(mei_stop);
+
+/**
+ * mei_write_is_idle - check if the write queues are idle
+ *
+ * @dev: the device structure
+ *
+ * Return: true of there is no pending write
+ */
+bool mei_write_is_idle(struct mei_device *dev)
+{
+ bool idle = (dev->dev_state == MEI_DEV_ENABLED &&
+ list_empty(&dev->ctrl_wr_list) &&
+ list_empty(&dev->write_list) &&
+ list_empty(&dev->write_waiting_list));
+
+ dev_dbg(dev->dev, "write pg: is idle[%d] state=%s ctrl=%01d write=%01d wwait=%01d\n",
+ idle,
+ mei_dev_state_str(dev->dev_state),
+ list_empty(&dev->ctrl_wr_list),
+ list_empty(&dev->write_list),
+ list_empty(&dev->write_waiting_list));
+
+ return idle;
+}
+EXPORT_SYMBOL_GPL(mei_write_is_idle);
+
+/**
+ * mei_device_init -- initialize mei_device structure
+ *
+ * @dev: the mei device
+ * @device: the device structure
+ * @hw_ops: hw operations
+ */
+void mei_device_init(struct mei_device *dev,
+ struct device *device,
+ const struct mei_hw_ops *hw_ops)
+{
+ /* setup our list array */
+ INIT_LIST_HEAD(&dev->file_list);
+ INIT_LIST_HEAD(&dev->device_list);
+ INIT_LIST_HEAD(&dev->me_clients);
+ mutex_init(&dev->device_lock);
+ init_rwsem(&dev->me_clients_rwsem);
+ mutex_init(&dev->cl_bus_lock);
+ init_waitqueue_head(&dev->wait_hw_ready);
+ init_waitqueue_head(&dev->wait_pg);
+ init_waitqueue_head(&dev->wait_hbm_start);
+ dev->dev_state = MEI_DEV_INITIALIZING;
+ dev->reset_count = 0;
+
+ INIT_LIST_HEAD(&dev->write_list);
+ INIT_LIST_HEAD(&dev->write_waiting_list);
+ INIT_LIST_HEAD(&dev->ctrl_wr_list);
+ INIT_LIST_HEAD(&dev->ctrl_rd_list);
+ dev->tx_queue_limit = MEI_TX_QUEUE_LIMIT_DEFAULT;
+
+ INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
+ INIT_WORK(&dev->reset_work, mei_reset_work);
+ INIT_WORK(&dev->bus_rescan_work, mei_cl_bus_rescan_work);
+
+ bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
+ dev->open_handle_count = 0;
+
+ /*
+ * Reserving the first client ID
+ * 0: Reserved for MEI Bus Message communications
+ */
+ bitmap_set(dev->host_clients_map, 0, 1);
+
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ dev->ops = hw_ops;
+ dev->dev = device;
+}
+EXPORT_SYMBOL_GPL(mei_device_init);
+
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
new file mode 100644
index 0000000..5a661cb
--- /dev/null
+++ b/drivers/misc/mei/interrupt.c
@@ -0,0 +1,532 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+
+#include <linux/export.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/jiffies.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "hbm.h"
+#include "client.h"
+
+
+/**
+ * mei_irq_compl_handler - dispatch complete handlers
+ * for the completed callbacks
+ *
+ * @dev: mei device
+ * @cmpl_list: list of completed cbs
+ */
+void mei_irq_compl_handler(struct mei_device *dev, struct list_head *cmpl_list)
+{
+ struct mei_cl_cb *cb, *next;
+ struct mei_cl *cl;
+
+ list_for_each_entry_safe(cb, next, cmpl_list, list) {
+ cl = cb->cl;
+ list_del_init(&cb->list);
+
+ dev_dbg(dev->dev, "completing call back.\n");
+ mei_cl_complete(cl, cb);
+ }
+}
+EXPORT_SYMBOL_GPL(mei_irq_compl_handler);
+
+/**
+ * mei_cl_hbm_equal - check if hbm is addressed to the client
+ *
+ * @cl: host client
+ * @mei_hdr: header of mei client message
+ *
+ * Return: true if matches, false otherwise
+ */
+static inline int mei_cl_hbm_equal(struct mei_cl *cl,
+ struct mei_msg_hdr *mei_hdr)
+{
+ return mei_cl_host_addr(cl) == mei_hdr->host_addr &&
+ mei_cl_me_id(cl) == mei_hdr->me_addr;
+}
+
+/**
+ * mei_irq_discard_msg - discard received message
+ *
+ * @dev: mei device
+ * @hdr: message header
+ */
+static void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr)
+{
+ /*
+ * no need to check for size as it is guarantied
+ * that length fits into rd_msg_buf
+ */
+ mei_read_slots(dev, dev->rd_msg_buf, hdr->length);
+ dev_dbg(dev->dev, "discarding message " MEI_HDR_FMT "\n",
+ MEI_HDR_PRM(hdr));
+}
+
+/**
+ * mei_cl_irq_read_msg - process client message
+ *
+ * @cl: reading client
+ * @mei_hdr: header of mei client message
+ * @cmpl_list: completion list
+ *
+ * Return: always 0
+ */
+static int mei_cl_irq_read_msg(struct mei_cl *cl,
+ struct mei_msg_hdr *mei_hdr,
+ struct list_head *cmpl_list)
+{
+ struct mei_device *dev = cl->dev;
+ struct mei_cl_cb *cb;
+ size_t buf_sz;
+
+ cb = list_first_entry_or_null(&cl->rd_pending, struct mei_cl_cb, list);
+ if (!cb) {
+ if (!mei_cl_is_fixed_address(cl)) {
+ cl_err(dev, cl, "pending read cb not found\n");
+ goto discard;
+ }
+ cb = mei_cl_alloc_cb(cl, mei_cl_mtu(cl), MEI_FOP_READ, cl->fp);
+ if (!cb)
+ goto discard;
+ list_add_tail(&cb->list, &cl->rd_pending);
+ }
+
+ if (!mei_cl_is_connected(cl)) {
+ cl_dbg(dev, cl, "not connected\n");
+ cb->status = -ENODEV;
+ goto discard;
+ }
+
+ buf_sz = mei_hdr->length + cb->buf_idx;
+ /* catch for integer overflow */
+ if (buf_sz < cb->buf_idx) {
+ cl_err(dev, cl, "message is too big len %d idx %zu\n",
+ mei_hdr->length, cb->buf_idx);
+ cb->status = -EMSGSIZE;
+ goto discard;
+ }
+
+ if (cb->buf.size < buf_sz) {
+ cl_dbg(dev, cl, "message overflow. size %zu len %d idx %zu\n",
+ cb->buf.size, mei_hdr->length, cb->buf_idx);
+ cb->status = -EMSGSIZE;
+ goto discard;
+ }
+
+ mei_read_slots(dev, cb->buf.data + cb->buf_idx, mei_hdr->length);
+
+ cb->buf_idx += mei_hdr->length;
+
+ if (mei_hdr->msg_complete) {
+ cl_dbg(dev, cl, "completed read length = %zu\n", cb->buf_idx);
+ list_move_tail(&cb->list, cmpl_list);
+ } else {
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_request_autosuspend(dev->dev);
+ }
+
+ return 0;
+
+discard:
+ if (cb)
+ list_move_tail(&cb->list, cmpl_list);
+ mei_irq_discard_msg(dev, mei_hdr);
+ return 0;
+}
+
+/**
+ * mei_cl_irq_disconnect_rsp - send disconnection response message
+ *
+ * @cl: client
+ * @cb: callback block.
+ * @cmpl_list: complete list.
+ *
+ * Return: 0, OK; otherwise, error.
+ */
+static int mei_cl_irq_disconnect_rsp(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct list_head *cmpl_list)
+{
+ struct mei_device *dev = cl->dev;
+ u32 msg_slots;
+ int slots;
+ int ret;
+
+ msg_slots = mei_hbm2slots(sizeof(struct hbm_client_connect_response));
+ slots = mei_hbuf_empty_slots(dev);
+ if (slots < 0)
+ return -EOVERFLOW;
+
+ if ((u32)slots < msg_slots)
+ return -EMSGSIZE;
+
+ ret = mei_hbm_cl_disconnect_rsp(dev, cl);
+ list_move_tail(&cb->list, cmpl_list);
+
+ return ret;
+}
+
+/**
+ * mei_cl_irq_read - processes client read related operation from the
+ * interrupt thread context - request for flow control credits
+ *
+ * @cl: client
+ * @cb: callback block.
+ * @cmpl_list: complete list.
+ *
+ * Return: 0, OK; otherwise, error.
+ */
+static int mei_cl_irq_read(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct list_head *cmpl_list)
+{
+ struct mei_device *dev = cl->dev;
+ u32 msg_slots;
+ int slots;
+ int ret;
+
+ if (!list_empty(&cl->rd_pending))
+ return 0;
+
+ msg_slots = mei_hbm2slots(sizeof(struct hbm_flow_control));
+ slots = mei_hbuf_empty_slots(dev);
+ if (slots < 0)
+ return -EOVERFLOW;
+
+ if ((u32)slots < msg_slots)
+ return -EMSGSIZE;
+
+ ret = mei_hbm_cl_flow_control_req(dev, cl);
+ if (ret) {
+ cl->status = ret;
+ cb->buf_idx = 0;
+ list_move_tail(&cb->list, cmpl_list);
+ return ret;
+ }
+
+ list_move_tail(&cb->list, &cl->rd_pending);
+
+ return 0;
+}
+
+static inline bool hdr_is_hbm(struct mei_msg_hdr *mei_hdr)
+{
+ return mei_hdr->host_addr == 0 && mei_hdr->me_addr == 0;
+}
+
+static inline bool hdr_is_fixed(struct mei_msg_hdr *mei_hdr)
+{
+ return mei_hdr->host_addr == 0 && mei_hdr->me_addr != 0;
+}
+
+static inline int hdr_is_valid(u32 msg_hdr)
+{
+ struct mei_msg_hdr *mei_hdr;
+
+ mei_hdr = (struct mei_msg_hdr *)&msg_hdr;
+ if (!msg_hdr || mei_hdr->reserved)
+ return -EBADMSG;
+
+ return 0;
+}
+
+/**
+ * mei_irq_read_handler - bottom half read routine after ISR to
+ * handle the read processing.
+ *
+ * @dev: the device structure
+ * @cmpl_list: An instance of our list structure
+ * @slots: slots to read.
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+int mei_irq_read_handler(struct mei_device *dev,
+ struct list_head *cmpl_list, s32 *slots)
+{
+ struct mei_msg_hdr *mei_hdr;
+ struct mei_cl *cl;
+ int ret;
+
+ if (!dev->rd_msg_hdr) {
+ dev->rd_msg_hdr = mei_read_hdr(dev);
+ (*slots)--;
+ dev_dbg(dev->dev, "slots =%08x.\n", *slots);
+
+ ret = hdr_is_valid(dev->rd_msg_hdr);
+ if (ret) {
+ dev_err(dev->dev, "corrupted message header 0x%08X\n",
+ dev->rd_msg_hdr);
+ goto end;
+ }
+ }
+
+ mei_hdr = (struct mei_msg_hdr *)&dev->rd_msg_hdr;
+ dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr));
+
+ if (mei_slots2data(*slots) < mei_hdr->length) {
+ dev_err(dev->dev, "less data available than length=%08x.\n",
+ *slots);
+ /* we can't read the message */
+ ret = -ENODATA;
+ goto end;
+ }
+
+ /* HBM message */
+ if (hdr_is_hbm(mei_hdr)) {
+ ret = mei_hbm_dispatch(dev, mei_hdr);
+ if (ret) {
+ dev_dbg(dev->dev, "mei_hbm_dispatch failed ret = %d\n",
+ ret);
+ goto end;
+ }
+ goto reset_slots;
+ }
+
+ /* find recipient cl */
+ list_for_each_entry(cl, &dev->file_list, link) {
+ if (mei_cl_hbm_equal(cl, mei_hdr)) {
+ cl_dbg(dev, cl, "got a message\n");
+ break;
+ }
+ }
+
+ /* if no recipient cl was found we assume corrupted header */
+ if (&cl->link == &dev->file_list) {
+ /* A message for not connected fixed address clients
+ * should be silently discarded
+ * On power down client may be force cleaned,
+ * silently discard such messages
+ */
+ if (hdr_is_fixed(mei_hdr) ||
+ dev->dev_state == MEI_DEV_POWER_DOWN) {
+ mei_irq_discard_msg(dev, mei_hdr);
+ ret = 0;
+ goto reset_slots;
+ }
+ dev_err(dev->dev, "no destination client found 0x%08X\n",
+ dev->rd_msg_hdr);
+ ret = -EBADMSG;
+ goto end;
+ }
+
+ ret = mei_cl_irq_read_msg(cl, mei_hdr, cmpl_list);
+
+
+reset_slots:
+ /* reset the number of slots and header */
+ *slots = mei_count_full_read_slots(dev);
+ dev->rd_msg_hdr = 0;
+
+ if (*slots == -EOVERFLOW) {
+ /* overflow - reset */
+ dev_err(dev->dev, "resetting due to slots overflow.\n");
+ /* set the event since message has been read */
+ ret = -ERANGE;
+ goto end;
+ }
+end:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mei_irq_read_handler);
+
+
+/**
+ * mei_irq_write_handler - dispatch write requests
+ * after irq received
+ *
+ * @dev: the device structure
+ * @cmpl_list: An instance of our list structure
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+int mei_irq_write_handler(struct mei_device *dev, struct list_head *cmpl_list)
+{
+
+ struct mei_cl *cl;
+ struct mei_cl_cb *cb, *next;
+ s32 slots;
+ int ret;
+
+
+ if (!mei_hbuf_acquire(dev))
+ return 0;
+
+ slots = mei_hbuf_empty_slots(dev);
+ if (slots < 0)
+ return -EOVERFLOW;
+
+ if (slots == 0)
+ return -EMSGSIZE;
+
+ /* complete all waiting for write CB */
+ dev_dbg(dev->dev, "complete all waiting for write cb.\n");
+
+ list_for_each_entry_safe(cb, next, &dev->write_waiting_list, list) {
+ cl = cb->cl;
+
+ cl->status = 0;
+ cl_dbg(dev, cl, "MEI WRITE COMPLETE\n");
+ cl->writing_state = MEI_WRITE_COMPLETE;
+ list_move_tail(&cb->list, cmpl_list);
+ }
+
+ /* complete control write list CB */
+ dev_dbg(dev->dev, "complete control write list cb.\n");
+ list_for_each_entry_safe(cb, next, &dev->ctrl_wr_list, list) {
+ cl = cb->cl;
+ switch (cb->fop_type) {
+ case MEI_FOP_DISCONNECT:
+ /* send disconnect message */
+ ret = mei_cl_irq_disconnect(cl, cb, cmpl_list);
+ if (ret)
+ return ret;
+
+ break;
+ case MEI_FOP_READ:
+ /* send flow control message */
+ ret = mei_cl_irq_read(cl, cb, cmpl_list);
+ if (ret)
+ return ret;
+
+ break;
+ case MEI_FOP_CONNECT:
+ /* connect message */
+ ret = mei_cl_irq_connect(cl, cb, cmpl_list);
+ if (ret)
+ return ret;
+
+ break;
+ case MEI_FOP_DISCONNECT_RSP:
+ /* send disconnect resp */
+ ret = mei_cl_irq_disconnect_rsp(cl, cb, cmpl_list);
+ if (ret)
+ return ret;
+ break;
+
+ case MEI_FOP_NOTIFY_START:
+ case MEI_FOP_NOTIFY_STOP:
+ ret = mei_cl_irq_notify(cl, cb, cmpl_list);
+ if (ret)
+ return ret;
+ break;
+ default:
+ BUG();
+ }
+
+ }
+ /* complete write list CB */
+ dev_dbg(dev->dev, "complete write list cb.\n");
+ list_for_each_entry_safe(cb, next, &dev->write_list, list) {
+ cl = cb->cl;
+ ret = mei_cl_irq_write(cl, cb, cmpl_list);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mei_irq_write_handler);
+
+
+/**
+ * mei_connect_timeout - connect/disconnect timeouts
+ *
+ * @cl: host client
+ */
+static void mei_connect_timeout(struct mei_cl *cl)
+{
+ struct mei_device *dev = cl->dev;
+
+ if (cl->state == MEI_FILE_CONNECTING) {
+ if (dev->hbm_f_dot_supported) {
+ cl->state = MEI_FILE_DISCONNECT_REQUIRED;
+ wake_up(&cl->wait);
+ return;
+ }
+ }
+ mei_reset(dev);
+}
+
+#define MEI_STALL_TIMER_FREQ (2 * HZ)
+/**
+ * mei_schedule_stall_timer - re-arm stall_timer work
+ *
+ * Schedule stall timer
+ *
+ * @dev: the device structure
+ */
+void mei_schedule_stall_timer(struct mei_device *dev)
+{
+ schedule_delayed_work(&dev->timer_work, MEI_STALL_TIMER_FREQ);
+}
+
+/**
+ * mei_timer - timer function.
+ *
+ * @work: pointer to the work_struct structure
+ *
+ */
+void mei_timer(struct work_struct *work)
+{
+ struct mei_cl *cl;
+ struct mei_device *dev = container_of(work,
+ struct mei_device, timer_work.work);
+ bool reschedule_timer = false;
+
+ mutex_lock(&dev->device_lock);
+
+ /* Catch interrupt stalls during HBM init handshake */
+ if (dev->dev_state == MEI_DEV_INIT_CLIENTS &&
+ dev->hbm_state != MEI_HBM_IDLE) {
+
+ if (dev->init_clients_timer) {
+ if (--dev->init_clients_timer == 0) {
+ dev_err(dev->dev, "timer: init clients timeout hbm_state = %d.\n",
+ dev->hbm_state);
+ mei_reset(dev);
+ goto out;
+ }
+ reschedule_timer = true;
+ }
+ }
+
+ if (dev->dev_state != MEI_DEV_ENABLED)
+ goto out;
+
+ /*** connect/disconnect timeouts ***/
+ list_for_each_entry(cl, &dev->file_list, link) {
+ if (cl->timer_count) {
+ if (--cl->timer_count == 0) {
+ dev_err(dev->dev, "timer: connect/disconnect timeout.\n");
+ mei_connect_timeout(cl);
+ goto out;
+ }
+ reschedule_timer = true;
+ }
+ }
+
+out:
+ if (dev->dev_state != MEI_DEV_DISABLED && reschedule_timer)
+ mei_schedule_stall_timer(dev);
+
+ mutex_unlock(&dev->device_lock);
+}
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
new file mode 100644
index 0000000..4d77a6a
--- /dev/null
+++ b/drivers/misc/mei/main.c
@@ -0,0 +1,1022 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2018, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/ioctl.h>
+#include <linux/cdev.h>
+#include <linux/sched/signal.h>
+#include <linux/uuid.h>
+#include <linux/compat.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "client.h"
+
+/**
+ * mei_open - the open function
+ *
+ * @inode: pointer to inode structure
+ * @file: pointer to file structure
+ *
+ * Return: 0 on success, <0 on error
+ */
+static int mei_open(struct inode *inode, struct file *file)
+{
+ struct mei_device *dev;
+ struct mei_cl *cl;
+
+ int err;
+
+ dev = container_of(inode->i_cdev, struct mei_device, cdev);
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&dev->device_lock);
+
+ if (dev->dev_state != MEI_DEV_ENABLED) {
+ dev_dbg(dev->dev, "dev_state != MEI_ENABLED dev_state = %s\n",
+ mei_dev_state_str(dev->dev_state));
+ err = -ENODEV;
+ goto err_unlock;
+ }
+
+ cl = mei_cl_alloc_linked(dev);
+ if (IS_ERR(cl)) {
+ err = PTR_ERR(cl);
+ goto err_unlock;
+ }
+
+ cl->fp = file;
+ file->private_data = cl;
+
+ mutex_unlock(&dev->device_lock);
+
+ return nonseekable_open(inode, file);
+
+err_unlock:
+ mutex_unlock(&dev->device_lock);
+ return err;
+}
+
+/**
+ * mei_release - the release function
+ *
+ * @inode: pointer to inode structure
+ * @file: pointer to file structure
+ *
+ * Return: 0 on success, <0 on error
+ */
+static int mei_release(struct inode *inode, struct file *file)
+{
+ struct mei_cl *cl = file->private_data;
+ struct mei_device *dev;
+ int rets;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ dev = cl->dev;
+
+ mutex_lock(&dev->device_lock);
+
+ rets = mei_cl_disconnect(cl);
+
+ mei_cl_flush_queues(cl, file);
+ cl_dbg(dev, cl, "removing\n");
+
+ mei_cl_unlink(cl);
+
+ file->private_data = NULL;
+
+ kfree(cl);
+
+ mutex_unlock(&dev->device_lock);
+ return rets;
+}
+
+
+/**
+ * mei_read - the read function.
+ *
+ * @file: pointer to file structure
+ * @ubuf: pointer to user buffer
+ * @length: buffer length
+ * @offset: data offset in buffer
+ *
+ * Return: >=0 data length on success , <0 on error
+ */
+static ssize_t mei_read(struct file *file, char __user *ubuf,
+ size_t length, loff_t *offset)
+{
+ struct mei_cl *cl = file->private_data;
+ struct mei_device *dev;
+ struct mei_cl_cb *cb = NULL;
+ bool nonblock = !!(file->f_flags & O_NONBLOCK);
+ ssize_t rets;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ dev = cl->dev;
+
+
+ mutex_lock(&dev->device_lock);
+ if (dev->dev_state != MEI_DEV_ENABLED) {
+ rets = -ENODEV;
+ goto out;
+ }
+
+ if (length == 0) {
+ rets = 0;
+ goto out;
+ }
+
+ if (ubuf == NULL) {
+ rets = -EMSGSIZE;
+ goto out;
+ }
+
+ cb = mei_cl_read_cb(cl, file);
+ if (cb)
+ goto copy_buffer;
+
+ if (*offset > 0)
+ *offset = 0;
+
+ rets = mei_cl_read_start(cl, length, file);
+ if (rets && rets != -EBUSY) {
+ cl_dbg(dev, cl, "mei start read failure status = %zd\n", rets);
+ goto out;
+ }
+
+ if (nonblock) {
+ rets = -EAGAIN;
+ goto out;
+ }
+
+ mutex_unlock(&dev->device_lock);
+ if (wait_event_interruptible(cl->rx_wait,
+ !list_empty(&cl->rd_completed) ||
+ !mei_cl_is_connected(cl))) {
+ if (signal_pending(current))
+ return -EINTR;
+ return -ERESTARTSYS;
+ }
+ mutex_lock(&dev->device_lock);
+
+ if (!mei_cl_is_connected(cl)) {
+ rets = -ENODEV;
+ goto out;
+ }
+
+ cb = mei_cl_read_cb(cl, file);
+ if (!cb) {
+ rets = 0;
+ goto out;
+ }
+
+copy_buffer:
+ /* now copy the data to user space */
+ if (cb->status) {
+ rets = cb->status;
+ cl_dbg(dev, cl, "read operation failed %zd\n", rets);
+ goto free;
+ }
+
+ cl_dbg(dev, cl, "buf.size = %zu buf.idx = %zu offset = %lld\n",
+ cb->buf.size, cb->buf_idx, *offset);
+ if (*offset >= cb->buf_idx) {
+ rets = 0;
+ goto free;
+ }
+
+ /* length is being truncated to PAGE_SIZE,
+ * however buf_idx may point beyond that */
+ length = min_t(size_t, length, cb->buf_idx - *offset);
+
+ if (copy_to_user(ubuf, cb->buf.data + *offset, length)) {
+ dev_dbg(dev->dev, "failed to copy data to userland\n");
+ rets = -EFAULT;
+ goto free;
+ }
+
+ rets = length;
+ *offset += length;
+ /* not all data was read, keep the cb */
+ if (*offset < cb->buf_idx)
+ goto out;
+
+free:
+ mei_io_cb_free(cb);
+ *offset = 0;
+
+out:
+ cl_dbg(dev, cl, "end mei read rets = %zd\n", rets);
+ mutex_unlock(&dev->device_lock);
+ return rets;
+}
+/**
+ * mei_write - the write function.
+ *
+ * @file: pointer to file structure
+ * @ubuf: pointer to user buffer
+ * @length: buffer length
+ * @offset: data offset in buffer
+ *
+ * Return: >=0 data length on success , <0 on error
+ */
+static ssize_t mei_write(struct file *file, const char __user *ubuf,
+ size_t length, loff_t *offset)
+{
+ struct mei_cl *cl = file->private_data;
+ struct mei_cl_cb *cb;
+ struct mei_device *dev;
+ ssize_t rets;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ dev = cl->dev;
+
+ mutex_lock(&dev->device_lock);
+
+ if (dev->dev_state != MEI_DEV_ENABLED) {
+ rets = -ENODEV;
+ goto out;
+ }
+
+ if (!mei_cl_is_connected(cl)) {
+ cl_err(dev, cl, "is not connected");
+ rets = -ENODEV;
+ goto out;
+ }
+
+ if (!mei_me_cl_is_active(cl->me_cl)) {
+ rets = -ENOTTY;
+ goto out;
+ }
+
+ if (length > mei_cl_mtu(cl)) {
+ rets = -EFBIG;
+ goto out;
+ }
+
+ if (length == 0) {
+ rets = 0;
+ goto out;
+ }
+
+ while (cl->tx_cb_queued >= dev->tx_queue_limit) {
+ if (file->f_flags & O_NONBLOCK) {
+ rets = -EAGAIN;
+ goto out;
+ }
+ mutex_unlock(&dev->device_lock);
+ rets = wait_event_interruptible(cl->tx_wait,
+ cl->writing_state == MEI_WRITE_COMPLETE ||
+ (!mei_cl_is_connected(cl)));
+ mutex_lock(&dev->device_lock);
+ if (rets) {
+ if (signal_pending(current))
+ rets = -EINTR;
+ goto out;
+ }
+ if (!mei_cl_is_connected(cl)) {
+ rets = -ENODEV;
+ goto out;
+ }
+ }
+
+ cb = mei_cl_alloc_cb(cl, length, MEI_FOP_WRITE, file);
+ if (!cb) {
+ rets = -ENOMEM;
+ goto out;
+ }
+
+ rets = copy_from_user(cb->buf.data, ubuf, length);
+ if (rets) {
+ dev_dbg(dev->dev, "failed to copy data from userland\n");
+ rets = -EFAULT;
+ mei_io_cb_free(cb);
+ goto out;
+ }
+
+ rets = mei_cl_write(cl, cb);
+out:
+ mutex_unlock(&dev->device_lock);
+ return rets;
+}
+
+/**
+ * mei_ioctl_connect_client - the connect to fw client IOCTL function
+ *
+ * @file: private data of the file object
+ * @data: IOCTL connect data, input and output parameters
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+static int mei_ioctl_connect_client(struct file *file,
+ struct mei_connect_client_data *data)
+{
+ struct mei_device *dev;
+ struct mei_client *client;
+ struct mei_me_client *me_cl;
+ struct mei_cl *cl;
+ int rets;
+
+ cl = file->private_data;
+ dev = cl->dev;
+
+ if (dev->dev_state != MEI_DEV_ENABLED)
+ return -ENODEV;
+
+ if (cl->state != MEI_FILE_INITIALIZING &&
+ cl->state != MEI_FILE_DISCONNECTED)
+ return -EBUSY;
+
+ /* find ME client we're trying to connect to */
+ me_cl = mei_me_cl_by_uuid(dev, &data->in_client_uuid);
+ if (!me_cl) {
+ dev_dbg(dev->dev, "Cannot connect to FW Client UUID = %pUl\n",
+ &data->in_client_uuid);
+ rets = -ENOTTY;
+ goto end;
+ }
+
+ if (me_cl->props.fixed_address) {
+ bool forbidden = dev->override_fixed_address ?
+ !dev->allow_fixed_address : !dev->hbm_f_fa_supported;
+ if (forbidden) {
+ dev_dbg(dev->dev, "Connection forbidden to FW Client UUID = %pUl\n",
+ &data->in_client_uuid);
+ rets = -ENOTTY;
+ goto end;
+ }
+ }
+
+ dev_dbg(dev->dev, "Connect to FW Client ID = %d\n",
+ me_cl->client_id);
+ dev_dbg(dev->dev, "FW Client - Protocol Version = %d\n",
+ me_cl->props.protocol_version);
+ dev_dbg(dev->dev, "FW Client - Max Msg Len = %d\n",
+ me_cl->props.max_msg_length);
+
+ /* prepare the output buffer */
+ client = &data->out_client_properties;
+ client->max_msg_length = me_cl->props.max_msg_length;
+ client->protocol_version = me_cl->props.protocol_version;
+ dev_dbg(dev->dev, "Can connect?\n");
+
+ rets = mei_cl_connect(cl, me_cl, file);
+
+end:
+ mei_me_cl_put(me_cl);
+ return rets;
+}
+
+/**
+ * mei_ioctl_client_notify_request -
+ * propagate event notification request to client
+ *
+ * @file: pointer to file structure
+ * @request: 0 - disable, 1 - enable
+ *
+ * Return: 0 on success , <0 on error
+ */
+static int mei_ioctl_client_notify_request(const struct file *file, u32 request)
+{
+ struct mei_cl *cl = file->private_data;
+
+ if (request != MEI_HBM_NOTIFICATION_START &&
+ request != MEI_HBM_NOTIFICATION_STOP)
+ return -EINVAL;
+
+ return mei_cl_notify_request(cl, file, (u8)request);
+}
+
+/**
+ * mei_ioctl_client_notify_get - wait for notification request
+ *
+ * @file: pointer to file structure
+ * @notify_get: 0 - disable, 1 - enable
+ *
+ * Return: 0 on success , <0 on error
+ */
+static int mei_ioctl_client_notify_get(const struct file *file, u32 *notify_get)
+{
+ struct mei_cl *cl = file->private_data;
+ bool notify_ev;
+ bool block = (file->f_flags & O_NONBLOCK) == 0;
+ int rets;
+
+ rets = mei_cl_notify_get(cl, block, ¬ify_ev);
+ if (rets)
+ return rets;
+
+ *notify_get = notify_ev ? 1 : 0;
+ return 0;
+}
+
+/**
+ * mei_ioctl - the IOCTL function
+ *
+ * @file: pointer to file structure
+ * @cmd: ioctl command
+ * @data: pointer to mei message structure
+ *
+ * Return: 0 on success , <0 on error
+ */
+static long mei_ioctl(struct file *file, unsigned int cmd, unsigned long data)
+{
+ struct mei_device *dev;
+ struct mei_cl *cl = file->private_data;
+ struct mei_connect_client_data connect_data;
+ u32 notify_get, notify_req;
+ int rets;
+
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ dev = cl->dev;
+
+ dev_dbg(dev->dev, "IOCTL cmd = 0x%x", cmd);
+
+ mutex_lock(&dev->device_lock);
+ if (dev->dev_state != MEI_DEV_ENABLED) {
+ rets = -ENODEV;
+ goto out;
+ }
+
+ switch (cmd) {
+ case IOCTL_MEI_CONNECT_CLIENT:
+ dev_dbg(dev->dev, ": IOCTL_MEI_CONNECT_CLIENT.\n");
+ if (copy_from_user(&connect_data, (char __user *)data,
+ sizeof(struct mei_connect_client_data))) {
+ dev_dbg(dev->dev, "failed to copy data from userland\n");
+ rets = -EFAULT;
+ goto out;
+ }
+
+ rets = mei_ioctl_connect_client(file, &connect_data);
+ if (rets)
+ goto out;
+
+ /* if all is ok, copying the data back to user. */
+ if (copy_to_user((char __user *)data, &connect_data,
+ sizeof(struct mei_connect_client_data))) {
+ dev_dbg(dev->dev, "failed to copy data to userland\n");
+ rets = -EFAULT;
+ goto out;
+ }
+
+ break;
+
+ case IOCTL_MEI_NOTIFY_SET:
+ dev_dbg(dev->dev, ": IOCTL_MEI_NOTIFY_SET.\n");
+ if (copy_from_user(¬ify_req,
+ (char __user *)data, sizeof(notify_req))) {
+ dev_dbg(dev->dev, "failed to copy data from userland\n");
+ rets = -EFAULT;
+ goto out;
+ }
+ rets = mei_ioctl_client_notify_request(file, notify_req);
+ break;
+
+ case IOCTL_MEI_NOTIFY_GET:
+ dev_dbg(dev->dev, ": IOCTL_MEI_NOTIFY_GET.\n");
+ rets = mei_ioctl_client_notify_get(file, ¬ify_get);
+ if (rets)
+ goto out;
+
+ dev_dbg(dev->dev, "copy connect data to user\n");
+ if (copy_to_user((char __user *)data,
+ ¬ify_get, sizeof(notify_get))) {
+ dev_dbg(dev->dev, "failed to copy data to userland\n");
+ rets = -EFAULT;
+ goto out;
+
+ }
+ break;
+
+ default:
+ rets = -ENOIOCTLCMD;
+ }
+
+out:
+ mutex_unlock(&dev->device_lock);
+ return rets;
+}
+
+/**
+ * mei_compat_ioctl - the compat IOCTL function
+ *
+ * @file: pointer to file structure
+ * @cmd: ioctl command
+ * @data: pointer to mei message structure
+ *
+ * Return: 0 on success , <0 on error
+ */
+#ifdef CONFIG_COMPAT
+static long mei_compat_ioctl(struct file *file,
+ unsigned int cmd, unsigned long data)
+{
+ return mei_ioctl(file, cmd, (unsigned long)compat_ptr(data));
+}
+#endif
+
+
+/**
+ * mei_poll - the poll function
+ *
+ * @file: pointer to file structure
+ * @wait: pointer to poll_table structure
+ *
+ * Return: poll mask
+ */
+static __poll_t mei_poll(struct file *file, poll_table *wait)
+{
+ __poll_t req_events = poll_requested_events(wait);
+ struct mei_cl *cl = file->private_data;
+ struct mei_device *dev;
+ __poll_t mask = 0;
+ bool notify_en;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return EPOLLERR;
+
+ dev = cl->dev;
+
+ mutex_lock(&dev->device_lock);
+
+ notify_en = cl->notify_en && (req_events & EPOLLPRI);
+
+ if (dev->dev_state != MEI_DEV_ENABLED ||
+ !mei_cl_is_connected(cl)) {
+ mask = EPOLLERR;
+ goto out;
+ }
+
+ if (notify_en) {
+ poll_wait(file, &cl->ev_wait, wait);
+ if (cl->notify_ev)
+ mask |= EPOLLPRI;
+ }
+
+ if (req_events & (EPOLLIN | EPOLLRDNORM)) {
+ poll_wait(file, &cl->rx_wait, wait);
+
+ if (!list_empty(&cl->rd_completed))
+ mask |= EPOLLIN | EPOLLRDNORM;
+ else
+ mei_cl_read_start(cl, mei_cl_mtu(cl), file);
+ }
+
+ if (req_events & (POLLOUT | POLLWRNORM)) {
+ poll_wait(file, &cl->tx_wait, wait);
+ if (cl->tx_cb_queued < dev->tx_queue_limit)
+ mask |= POLLOUT | POLLWRNORM;
+ }
+
+out:
+ mutex_unlock(&dev->device_lock);
+ return mask;
+}
+
+/**
+ * mei_cl_is_write_queued - check if the client has pending writes.
+ *
+ * @cl: writing host client
+ *
+ * Return: true if client is writing, false otherwise.
+ */
+static bool mei_cl_is_write_queued(struct mei_cl *cl)
+{
+ struct mei_device *dev = cl->dev;
+ struct mei_cl_cb *cb;
+
+ list_for_each_entry(cb, &dev->write_list, list)
+ if (cb->cl == cl)
+ return true;
+ list_for_each_entry(cb, &dev->write_waiting_list, list)
+ if (cb->cl == cl)
+ return true;
+ return false;
+}
+
+/**
+ * mei_fsync - the fsync handler
+ *
+ * @fp: pointer to file structure
+ * @start: unused
+ * @end: unused
+ * @datasync: unused
+ *
+ * Return: 0 on success, -ENODEV if client is not connected
+ */
+static int mei_fsync(struct file *fp, loff_t start, loff_t end, int datasync)
+{
+ struct mei_cl *cl = fp->private_data;
+ struct mei_device *dev;
+ int rets;
+
+ if (WARN_ON(!cl || !cl->dev))
+ return -ENODEV;
+
+ dev = cl->dev;
+
+ mutex_lock(&dev->device_lock);
+
+ if (dev->dev_state != MEI_DEV_ENABLED || !mei_cl_is_connected(cl)) {
+ rets = -ENODEV;
+ goto out;
+ }
+
+ while (mei_cl_is_write_queued(cl)) {
+ mutex_unlock(&dev->device_lock);
+ rets = wait_event_interruptible(cl->tx_wait,
+ cl->writing_state == MEI_WRITE_COMPLETE ||
+ !mei_cl_is_connected(cl));
+ mutex_lock(&dev->device_lock);
+ if (rets) {
+ if (signal_pending(current))
+ rets = -EINTR;
+ goto out;
+ }
+ if (!mei_cl_is_connected(cl)) {
+ rets = -ENODEV;
+ goto out;
+ }
+ }
+ rets = 0;
+out:
+ mutex_unlock(&dev->device_lock);
+ return rets;
+}
+
+/**
+ * mei_fasync - asynchronous io support
+ *
+ * @fd: file descriptor
+ * @file: pointer to file structure
+ * @band: band bitmap
+ *
+ * Return: negative on error,
+ * 0 if it did no changes,
+ * and positive a process was added or deleted
+ */
+static int mei_fasync(int fd, struct file *file, int band)
+{
+
+ struct mei_cl *cl = file->private_data;
+
+ if (!mei_cl_is_connected(cl))
+ return -ENODEV;
+
+ return fasync_helper(fd, file, band, &cl->ev_async);
+}
+
+/**
+ * fw_status_show - mei device fw_status attribute show method
+ *
+ * @device: device pointer
+ * @attr: attribute pointer
+ * @buf: char out buffer
+ *
+ * Return: number of the bytes printed into buf or error
+ */
+static ssize_t fw_status_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct mei_device *dev = dev_get_drvdata(device);
+ struct mei_fw_status fw_status;
+ int err, i;
+ ssize_t cnt = 0;
+
+ mutex_lock(&dev->device_lock);
+ err = mei_fw_status(dev, &fw_status);
+ mutex_unlock(&dev->device_lock);
+ if (err) {
+ dev_err(device, "read fw_status error = %d\n", err);
+ return err;
+ }
+
+ for (i = 0; i < fw_status.count; i++)
+ cnt += scnprintf(buf + cnt, PAGE_SIZE - cnt, "%08X\n",
+ fw_status.status[i]);
+ return cnt;
+}
+static DEVICE_ATTR_RO(fw_status);
+
+/**
+ * hbm_ver_show - display HBM protocol version negotiated with FW
+ *
+ * @device: device pointer
+ * @attr: attribute pointer
+ * @buf: char out buffer
+ *
+ * Return: number of the bytes printed into buf or error
+ */
+static ssize_t hbm_ver_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct mei_device *dev = dev_get_drvdata(device);
+ struct hbm_version ver;
+
+ mutex_lock(&dev->device_lock);
+ ver = dev->version;
+ mutex_unlock(&dev->device_lock);
+
+ return sprintf(buf, "%u.%u\n", ver.major_version, ver.minor_version);
+}
+static DEVICE_ATTR_RO(hbm_ver);
+
+/**
+ * hbm_ver_drv_show - display HBM protocol version advertised by driver
+ *
+ * @device: device pointer
+ * @attr: attribute pointer
+ * @buf: char out buffer
+ *
+ * Return: number of the bytes printed into buf or error
+ */
+static ssize_t hbm_ver_drv_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u.%u\n", HBM_MAJOR_VERSION, HBM_MINOR_VERSION);
+}
+static DEVICE_ATTR_RO(hbm_ver_drv);
+
+static ssize_t tx_queue_limit_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct mei_device *dev = dev_get_drvdata(device);
+ u8 size = 0;
+
+ mutex_lock(&dev->device_lock);
+ size = dev->tx_queue_limit;
+ mutex_unlock(&dev->device_lock);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", size);
+}
+
+static ssize_t tx_queue_limit_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mei_device *dev = dev_get_drvdata(device);
+ u8 limit;
+ unsigned int inp;
+ int err;
+
+ err = kstrtouint(buf, 10, &inp);
+ if (err)
+ return err;
+ if (inp > MEI_TX_QUEUE_LIMIT_MAX || inp < MEI_TX_QUEUE_LIMIT_MIN)
+ return -EINVAL;
+ limit = inp;
+
+ mutex_lock(&dev->device_lock);
+ dev->tx_queue_limit = limit;
+ mutex_unlock(&dev->device_lock);
+
+ return count;
+}
+static DEVICE_ATTR_RW(tx_queue_limit);
+
+/**
+ * fw_ver_show - display ME FW version
+ *
+ * @device: device pointer
+ * @attr: attribute pointer
+ * @buf: char out buffer
+ *
+ * Return: number of the bytes printed into buf or error
+ */
+static ssize_t fw_ver_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct mei_device *dev = dev_get_drvdata(device);
+ struct mei_fw_version *ver;
+ ssize_t cnt = 0;
+ int i;
+
+ ver = dev->fw_ver;
+
+ for (i = 0; i < MEI_MAX_FW_VER_BLOCKS; i++)
+ cnt += scnprintf(buf + cnt, PAGE_SIZE - cnt, "%u:%u.%u.%u.%u\n",
+ ver[i].platform, ver[i].major, ver[i].minor,
+ ver[i].hotfix, ver[i].buildno);
+ return cnt;
+}
+static DEVICE_ATTR_RO(fw_ver);
+
+static struct attribute *mei_attrs[] = {
+ &dev_attr_fw_status.attr,
+ &dev_attr_hbm_ver.attr,
+ &dev_attr_hbm_ver_drv.attr,
+ &dev_attr_tx_queue_limit.attr,
+ &dev_attr_fw_ver.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(mei);
+
+/*
+ * file operations structure will be used for mei char device.
+ */
+static const struct file_operations mei_fops = {
+ .owner = THIS_MODULE,
+ .read = mei_read,
+ .unlocked_ioctl = mei_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = mei_compat_ioctl,
+#endif
+ .open = mei_open,
+ .release = mei_release,
+ .write = mei_write,
+ .poll = mei_poll,
+ .fsync = mei_fsync,
+ .fasync = mei_fasync,
+ .llseek = no_llseek
+};
+
+static struct class *mei_class;
+static dev_t mei_devt;
+#define MEI_MAX_DEVS MINORMASK
+static DEFINE_MUTEX(mei_minor_lock);
+static DEFINE_IDR(mei_idr);
+
+/**
+ * mei_minor_get - obtain next free device minor number
+ *
+ * @dev: device pointer
+ *
+ * Return: allocated minor, or -ENOSPC if no free minor left
+ */
+static int mei_minor_get(struct mei_device *dev)
+{
+ int ret;
+
+ mutex_lock(&mei_minor_lock);
+ ret = idr_alloc(&mei_idr, dev, 0, MEI_MAX_DEVS, GFP_KERNEL);
+ if (ret >= 0)
+ dev->minor = ret;
+ else if (ret == -ENOSPC)
+ dev_err(dev->dev, "too many mei devices\n");
+
+ mutex_unlock(&mei_minor_lock);
+ return ret;
+}
+
+/**
+ * mei_minor_free - mark device minor number as free
+ *
+ * @dev: device pointer
+ */
+static void mei_minor_free(struct mei_device *dev)
+{
+ mutex_lock(&mei_minor_lock);
+ idr_remove(&mei_idr, dev->minor);
+ mutex_unlock(&mei_minor_lock);
+}
+
+int mei_register(struct mei_device *dev, struct device *parent)
+{
+ struct device *clsdev; /* class device */
+ int ret, devno;
+
+ ret = mei_minor_get(dev);
+ if (ret < 0)
+ return ret;
+
+ /* Fill in the data structures */
+ devno = MKDEV(MAJOR(mei_devt), dev->minor);
+ cdev_init(&dev->cdev, &mei_fops);
+ dev->cdev.owner = parent->driver->owner;
+
+ /* Add the device */
+ ret = cdev_add(&dev->cdev, devno, 1);
+ if (ret) {
+ dev_err(parent, "unable to add device %d:%d\n",
+ MAJOR(mei_devt), dev->minor);
+ goto err_dev_add;
+ }
+
+ clsdev = device_create_with_groups(mei_class, parent, devno,
+ dev, mei_groups,
+ "mei%d", dev->minor);
+
+ if (IS_ERR(clsdev)) {
+ dev_err(parent, "unable to create device %d:%d\n",
+ MAJOR(mei_devt), dev->minor);
+ ret = PTR_ERR(clsdev);
+ goto err_dev_create;
+ }
+
+ ret = mei_dbgfs_register(dev, dev_name(clsdev));
+ if (ret) {
+ dev_err(clsdev, "cannot register debugfs ret = %d\n", ret);
+ goto err_dev_dbgfs;
+ }
+
+ return 0;
+
+err_dev_dbgfs:
+ device_destroy(mei_class, devno);
+err_dev_create:
+ cdev_del(&dev->cdev);
+err_dev_add:
+ mei_minor_free(dev);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mei_register);
+
+void mei_deregister(struct mei_device *dev)
+{
+ int devno;
+
+ devno = dev->cdev.dev;
+ cdev_del(&dev->cdev);
+
+ mei_dbgfs_deregister(dev);
+
+ device_destroy(mei_class, devno);
+
+ mei_minor_free(dev);
+}
+EXPORT_SYMBOL_GPL(mei_deregister);
+
+static int __init mei_init(void)
+{
+ int ret;
+
+ mei_class = class_create(THIS_MODULE, "mei");
+ if (IS_ERR(mei_class)) {
+ pr_err("couldn't create class\n");
+ ret = PTR_ERR(mei_class);
+ goto err;
+ }
+
+ ret = alloc_chrdev_region(&mei_devt, 0, MEI_MAX_DEVS, "mei");
+ if (ret < 0) {
+ pr_err("unable to allocate char dev region\n");
+ goto err_class;
+ }
+
+ ret = mei_cl_bus_init();
+ if (ret < 0) {
+ pr_err("unable to initialize bus\n");
+ goto err_chrdev;
+ }
+
+ return 0;
+
+err_chrdev:
+ unregister_chrdev_region(mei_devt, MEI_MAX_DEVS);
+err_class:
+ class_destroy(mei_class);
+err:
+ return ret;
+}
+
+static void __exit mei_exit(void)
+{
+ unregister_chrdev_region(mei_devt, MEI_MAX_DEVS);
+ class_destroy(mei_class);
+ mei_cl_bus_exit();
+}
+
+module_init(mei_init);
+module_exit(mei_exit);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("Intel(R) Management Engine Interface");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/misc/mei/mei-trace.c b/drivers/misc/mei/mei-trace.c
new file mode 100644
index 0000000..374edde
--- /dev/null
+++ b/drivers/misc/mei/mei-trace.c
@@ -0,0 +1,26 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+#include <linux/module.h>
+
+/* sparse doesn't like tracepoint macros */
+#ifndef __CHECKER__
+#define CREATE_TRACE_POINTS
+#include "mei-trace.h"
+
+EXPORT_TRACEPOINT_SYMBOL(mei_reg_read);
+EXPORT_TRACEPOINT_SYMBOL(mei_reg_write);
+EXPORT_TRACEPOINT_SYMBOL(mei_pci_cfg_read);
+#endif /* __CHECKER__ */
diff --git a/drivers/misc/mei/mei-trace.h b/drivers/misc/mei/mei-trace.h
new file mode 100644
index 0000000..b52e9b9
--- /dev/null
+++ b/drivers/misc/mei/mei-trace.h
@@ -0,0 +1,93 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#if !defined(_MEI_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _MEI_TRACE_H_
+
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#include <linux/device.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM mei
+
+TRACE_EVENT(mei_reg_read,
+ TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val),
+ TP_ARGS(dev, reg, offs, val),
+ TP_STRUCT__entry(
+ __string(dev, dev_name(dev))
+ __field(const char *, reg)
+ __field(u32, offs)
+ __field(u32, val)
+ ),
+ TP_fast_assign(
+ __assign_str(dev, dev_name(dev))
+ __entry->reg = reg;
+ __entry->offs = offs;
+ __entry->val = val;
+ ),
+ TP_printk("[%s] read %s:[%#x] = %#x",
+ __get_str(dev), __entry->reg, __entry->offs, __entry->val)
+);
+
+TRACE_EVENT(mei_reg_write,
+ TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val),
+ TP_ARGS(dev, reg, offs, val),
+ TP_STRUCT__entry(
+ __string(dev, dev_name(dev))
+ __field(const char *, reg)
+ __field(u32, offs)
+ __field(u32, val)
+ ),
+ TP_fast_assign(
+ __assign_str(dev, dev_name(dev))
+ __entry->reg = reg;
+ __entry->offs = offs;
+ __entry->val = val;
+ ),
+ TP_printk("[%s] write %s[%#x] = %#x",
+ __get_str(dev), __entry->reg, __entry->offs, __entry->val)
+);
+
+TRACE_EVENT(mei_pci_cfg_read,
+ TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val),
+ TP_ARGS(dev, reg, offs, val),
+ TP_STRUCT__entry(
+ __string(dev, dev_name(dev))
+ __field(const char *, reg)
+ __field(u32, offs)
+ __field(u32, val)
+ ),
+ TP_fast_assign(
+ __assign_str(dev, dev_name(dev))
+ __entry->reg = reg;
+ __entry->offs = offs;
+ __entry->val = val;
+ ),
+ TP_printk("[%s] pci cfg read %s:[%#x] = %#x",
+ __get_str(dev), __entry->reg, __entry->offs, __entry->val)
+);
+
+#endif /* _MEI_TRACE_H_ */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE mei-trace
+#include <trace/define_trace.h>
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
new file mode 100644
index 0000000..377397e
--- /dev/null
+++ b/drivers/misc/mei/mei_dev.h
@@ -0,0 +1,752 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2018, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _MEI_DEV_H_
+#define _MEI_DEV_H_
+
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/poll.h>
+#include <linux/mei.h>
+#include <linux/mei_cl_bus.h>
+
+#include "hw.h"
+#include "hbm.h"
+
+#define MEI_SLOT_SIZE sizeof(u32)
+#define MEI_RD_MSG_BUF_SIZE (128 * MEI_SLOT_SIZE)
+
+/*
+ * Number of Maximum MEI Clients
+ */
+#define MEI_CLIENTS_MAX 256
+
+/*
+ * maximum number of consecutive resets
+ */
+#define MEI_MAX_CONSEC_RESET 3
+
+/*
+ * Number of File descriptors/handles
+ * that can be opened to the driver.
+ *
+ * Limit to 255: 256 Total Clients
+ * minus internal client for MEI Bus Messages
+ */
+#define MEI_MAX_OPEN_HANDLE_COUNT (MEI_CLIENTS_MAX - 1)
+
+/* File state */
+enum file_state {
+ MEI_FILE_UNINITIALIZED = 0,
+ MEI_FILE_INITIALIZING,
+ MEI_FILE_CONNECTING,
+ MEI_FILE_CONNECTED,
+ MEI_FILE_DISCONNECTING,
+ MEI_FILE_DISCONNECT_REPLY,
+ MEI_FILE_DISCONNECT_REQUIRED,
+ MEI_FILE_DISCONNECTED,
+};
+
+/* MEI device states */
+enum mei_dev_state {
+ MEI_DEV_INITIALIZING = 0,
+ MEI_DEV_INIT_CLIENTS,
+ MEI_DEV_ENABLED,
+ MEI_DEV_RESETTING,
+ MEI_DEV_DISABLED,
+ MEI_DEV_POWER_DOWN,
+ MEI_DEV_POWER_UP
+};
+
+const char *mei_dev_state_str(int state);
+
+enum mei_file_transaction_states {
+ MEI_IDLE,
+ MEI_WRITING,
+ MEI_WRITE_COMPLETE,
+};
+
+/**
+ * enum mei_cb_file_ops - file operation associated with the callback
+ * @MEI_FOP_READ: read
+ * @MEI_FOP_WRITE: write
+ * @MEI_FOP_CONNECT: connect
+ * @MEI_FOP_DISCONNECT: disconnect
+ * @MEI_FOP_DISCONNECT_RSP: disconnect response
+ * @MEI_FOP_NOTIFY_START: start notification
+ * @MEI_FOP_NOTIFY_STOP: stop notification
+ */
+enum mei_cb_file_ops {
+ MEI_FOP_READ = 0,
+ MEI_FOP_WRITE,
+ MEI_FOP_CONNECT,
+ MEI_FOP_DISCONNECT,
+ MEI_FOP_DISCONNECT_RSP,
+ MEI_FOP_NOTIFY_START,
+ MEI_FOP_NOTIFY_STOP,
+};
+
+/**
+ * enum mei_cl_io_mode - io mode between driver and fw
+ *
+ * @MEI_CL_IO_TX_BLOCKING: send is blocking
+ * @MEI_CL_IO_TX_INTERNAL: internal communication between driver and FW
+ *
+ * @MEI_CL_IO_RX_NONBLOCK: recv is non-blocking
+ */
+enum mei_cl_io_mode {
+ MEI_CL_IO_TX_BLOCKING = BIT(0),
+ MEI_CL_IO_TX_INTERNAL = BIT(1),
+
+ MEI_CL_IO_RX_NONBLOCK = BIT(2),
+};
+
+/*
+ * Intel MEI message data struct
+ */
+struct mei_msg_data {
+ size_t size;
+ unsigned char *data;
+};
+
+/* Maximum number of processed FW status registers */
+#define MEI_FW_STATUS_MAX 6
+/* Minimal buffer for FW status string (8 bytes in dw + space or '\0') */
+#define MEI_FW_STATUS_STR_SZ (MEI_FW_STATUS_MAX * (8 + 1))
+
+
+/*
+ * struct mei_fw_status - storage of FW status data
+ *
+ * @count: number of actually available elements in array
+ * @status: FW status registers
+ */
+struct mei_fw_status {
+ int count;
+ u32 status[MEI_FW_STATUS_MAX];
+};
+
+/**
+ * struct mei_me_client - representation of me (fw) client
+ *
+ * @list: link in me client list
+ * @refcnt: struct reference count
+ * @props: client properties
+ * @client_id: me client id
+ * @tx_flow_ctrl_creds: flow control credits
+ * @connect_count: number connections to this client
+ * @bus_added: added to bus
+ */
+struct mei_me_client {
+ struct list_head list;
+ struct kref refcnt;
+ struct mei_client_properties props;
+ u8 client_id;
+ u8 tx_flow_ctrl_creds;
+ u8 connect_count;
+ u8 bus_added;
+};
+
+
+struct mei_cl;
+
+/**
+ * struct mei_cl_cb - file operation callback structure
+ *
+ * @list: link in callback queue
+ * @cl: file client who is running this operation
+ * @fop_type: file operation type
+ * @buf: buffer for data associated with the callback
+ * @buf_idx: last read index
+ * @fp: pointer to file structure
+ * @status: io status of the cb
+ * @internal: communication between driver and FW flag
+ * @blocking: transmission blocking mode
+ */
+struct mei_cl_cb {
+ struct list_head list;
+ struct mei_cl *cl;
+ enum mei_cb_file_ops fop_type;
+ struct mei_msg_data buf;
+ size_t buf_idx;
+ const struct file *fp;
+ int status;
+ u32 internal:1;
+ u32 blocking:1;
+};
+
+/**
+ * struct mei_cl - me client host representation
+ * carried in file->private_data
+ *
+ * @link: link in the clients list
+ * @dev: mei parent device
+ * @state: file operation state
+ * @tx_wait: wait queue for tx completion
+ * @rx_wait: wait queue for rx completion
+ * @wait: wait queue for management operation
+ * @ev_wait: notification wait queue
+ * @ev_async: event async notification
+ * @status: connection status
+ * @me_cl: fw client connected
+ * @fp: file associated with client
+ * @host_client_id: host id
+ * @tx_flow_ctrl_creds: transmit flow credentials
+ * @rx_flow_ctrl_creds: receive flow credentials
+ * @timer_count: watchdog timer for operation completion
+ * @notify_en: notification - enabled/disabled
+ * @notify_ev: pending notification event
+ * @tx_cb_queued: number of tx callbacks in queue
+ * @writing_state: state of the tx
+ * @rd_pending: pending read credits
+ * @rd_completed: completed read
+ *
+ * @cldev: device on the mei client bus
+ */
+struct mei_cl {
+ struct list_head link;
+ struct mei_device *dev;
+ enum file_state state;
+ wait_queue_head_t tx_wait;
+ wait_queue_head_t rx_wait;
+ wait_queue_head_t wait;
+ wait_queue_head_t ev_wait;
+ struct fasync_struct *ev_async;
+ int status;
+ struct mei_me_client *me_cl;
+ const struct file *fp;
+ u8 host_client_id;
+ u8 tx_flow_ctrl_creds;
+ u8 rx_flow_ctrl_creds;
+ u8 timer_count;
+ u8 notify_en;
+ u8 notify_ev;
+ u8 tx_cb_queued;
+ enum mei_file_transaction_states writing_state;
+ struct list_head rd_pending;
+ struct list_head rd_completed;
+
+ struct mei_cl_device *cldev;
+};
+
+#define MEI_TX_QUEUE_LIMIT_DEFAULT 50
+#define MEI_TX_QUEUE_LIMIT_MAX 255
+#define MEI_TX_QUEUE_LIMIT_MIN 30
+
+/**
+ * struct mei_hw_ops - hw specific ops
+ *
+ * @host_is_ready : query for host readiness
+ *
+ * @hw_is_ready : query if hw is ready
+ * @hw_reset : reset hw
+ * @hw_start : start hw after reset
+ * @hw_config : configure hw
+ *
+ * @fw_status : get fw status registers
+ * @pg_state : power gating state of the device
+ * @pg_in_transition : is device now in pg transition
+ * @pg_is_enabled : is power gating enabled
+ *
+ * @intr_clear : clear pending interrupts
+ * @intr_enable : enable interrupts
+ * @intr_disable : disable interrupts
+ * @synchronize_irq : synchronize irqs
+ *
+ * @hbuf_free_slots : query for write buffer empty slots
+ * @hbuf_is_ready : query if write buffer is empty
+ * @hbuf_depth : query for write buffer depth
+ *
+ * @write : write a message to FW
+ *
+ * @rdbuf_full_slots : query how many slots are filled
+ *
+ * @read_hdr : get first 4 bytes (header)
+ * @read : read a buffer from the FW
+ */
+struct mei_hw_ops {
+
+ bool (*host_is_ready)(struct mei_device *dev);
+
+ bool (*hw_is_ready)(struct mei_device *dev);
+ int (*hw_reset)(struct mei_device *dev, bool enable);
+ int (*hw_start)(struct mei_device *dev);
+ void (*hw_config)(struct mei_device *dev);
+
+ int (*fw_status)(struct mei_device *dev, struct mei_fw_status *fw_sts);
+ enum mei_pg_state (*pg_state)(struct mei_device *dev);
+ bool (*pg_in_transition)(struct mei_device *dev);
+ bool (*pg_is_enabled)(struct mei_device *dev);
+
+ void (*intr_clear)(struct mei_device *dev);
+ void (*intr_enable)(struct mei_device *dev);
+ void (*intr_disable)(struct mei_device *dev);
+ void (*synchronize_irq)(struct mei_device *dev);
+
+ int (*hbuf_free_slots)(struct mei_device *dev);
+ bool (*hbuf_is_ready)(struct mei_device *dev);
+ u32 (*hbuf_depth)(const struct mei_device *dev);
+ int (*write)(struct mei_device *dev,
+ const void *hdr, size_t hdr_len,
+ const void *data, size_t data_len);
+
+ int (*rdbuf_full_slots)(struct mei_device *dev);
+
+ u32 (*read_hdr)(const struct mei_device *dev);
+ int (*read)(struct mei_device *dev,
+ unsigned char *buf, unsigned long len);
+};
+
+/* MEI bus API*/
+void mei_cl_bus_rescan_work(struct work_struct *work);
+void mei_cl_bus_dev_fixup(struct mei_cl_device *dev);
+ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length,
+ unsigned int mode);
+ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length,
+ unsigned int mode, unsigned long timeout);
+bool mei_cl_bus_rx_event(struct mei_cl *cl);
+bool mei_cl_bus_notify_event(struct mei_cl *cl);
+void mei_cl_bus_remove_devices(struct mei_device *bus);
+int mei_cl_bus_init(void);
+void mei_cl_bus_exit(void);
+
+/**
+ * enum mei_pg_event - power gating transition events
+ *
+ * @MEI_PG_EVENT_IDLE: the driver is not in power gating transition
+ * @MEI_PG_EVENT_WAIT: the driver is waiting for a pg event to complete
+ * @MEI_PG_EVENT_RECEIVED: the driver received pg event
+ * @MEI_PG_EVENT_INTR_WAIT: the driver is waiting for a pg event interrupt
+ * @MEI_PG_EVENT_INTR_RECEIVED: the driver received pg event interrupt
+ */
+enum mei_pg_event {
+ MEI_PG_EVENT_IDLE,
+ MEI_PG_EVENT_WAIT,
+ MEI_PG_EVENT_RECEIVED,
+ MEI_PG_EVENT_INTR_WAIT,
+ MEI_PG_EVENT_INTR_RECEIVED,
+};
+
+/**
+ * enum mei_pg_state - device internal power gating state
+ *
+ * @MEI_PG_OFF: device is not power gated - it is active
+ * @MEI_PG_ON: device is power gated - it is in lower power state
+ */
+enum mei_pg_state {
+ MEI_PG_OFF = 0,
+ MEI_PG_ON = 1,
+};
+
+const char *mei_pg_state_str(enum mei_pg_state state);
+
+/**
+ * struct mei_fw_version - MEI FW version struct
+ *
+ * @platform: platform identifier
+ * @major: major version field
+ * @minor: minor version field
+ * @buildno: build number version field
+ * @hotfix: hotfix number version field
+ */
+struct mei_fw_version {
+ u8 platform;
+ u8 major;
+ u16 minor;
+ u16 buildno;
+ u16 hotfix;
+};
+
+#define MEI_MAX_FW_VER_BLOCKS 3
+
+/**
+ * struct mei_device - MEI private device struct
+ *
+ * @dev : device on a bus
+ * @cdev : character device
+ * @minor : minor number allocated for device
+ *
+ * @write_list : write pending list
+ * @write_waiting_list : write completion list
+ * @ctrl_wr_list : pending control write list
+ * @ctrl_rd_list : pending control read list
+ * @tx_queue_limit: tx queues per client linit
+ *
+ * @file_list : list of opened handles
+ * @open_handle_count: number of opened handles
+ *
+ * @device_lock : big device lock
+ * @timer_work : MEI timer delayed work (timeouts)
+ *
+ * @recvd_hw_ready : hw ready message received flag
+ *
+ * @wait_hw_ready : wait queue for receive HW ready message form FW
+ * @wait_pg : wait queue for receive PG message from FW
+ * @wait_hbm_start : wait queue for receive HBM start message from FW
+ *
+ * @reset_count : number of consecutive resets
+ * @dev_state : device state
+ * @hbm_state : state of host bus message protocol
+ * @init_clients_timer : HBM init handshake timeout
+ *
+ * @pg_event : power gating event
+ * @pg_domain : runtime PM domain
+ *
+ * @rd_msg_buf : control messages buffer
+ * @rd_msg_hdr : read message header storage
+ *
+ * @hbuf_is_ready : query if the host host/write buffer is ready
+ *
+ * @version : HBM protocol version in use
+ * @hbm_f_pg_supported : hbm feature pgi protocol
+ * @hbm_f_dc_supported : hbm feature dynamic clients
+ * @hbm_f_dot_supported : hbm feature disconnect on timeout
+ * @hbm_f_ev_supported : hbm feature event notification
+ * @hbm_f_fa_supported : hbm feature fixed address client
+ * @hbm_f_ie_supported : hbm feature immediate reply to enum request
+ * @hbm_f_os_supported : hbm feature support OS ver message
+ * @hbm_f_dr_supported : hbm feature dma ring supported
+ *
+ * @fw_ver : FW versions
+ *
+ * @me_clients_rwsem: rw lock over me_clients list
+ * @me_clients : list of FW clients
+ * @me_clients_map : FW clients bit map
+ * @host_clients_map : host clients id pool
+ *
+ * @allow_fixed_address: allow user space to connect a fixed client
+ * @override_fixed_address: force allow fixed address behavior
+ *
+ * @reset_work : work item for the device reset
+ * @bus_rescan_work : work item for the bus rescan
+ *
+ * @device_list : mei client bus list
+ * @cl_bus_lock : client bus list lock
+ *
+ * @dbgfs_dir : debugfs mei root directory
+ *
+ * @ops: : hw specific operations
+ * @hw : hw specific data
+ */
+struct mei_device {
+ struct device *dev;
+ struct cdev cdev;
+ int minor;
+
+ struct list_head write_list;
+ struct list_head write_waiting_list;
+ struct list_head ctrl_wr_list;
+ struct list_head ctrl_rd_list;
+ u8 tx_queue_limit;
+
+ struct list_head file_list;
+ long open_handle_count;
+
+ struct mutex device_lock;
+ struct delayed_work timer_work;
+
+ bool recvd_hw_ready;
+ /*
+ * waiting queue for receive message from FW
+ */
+ wait_queue_head_t wait_hw_ready;
+ wait_queue_head_t wait_pg;
+ wait_queue_head_t wait_hbm_start;
+
+ /*
+ * mei device states
+ */
+ unsigned long reset_count;
+ enum mei_dev_state dev_state;
+ enum mei_hbm_state hbm_state;
+ u16 init_clients_timer;
+
+ /*
+ * Power Gating support
+ */
+ enum mei_pg_event pg_event;
+#ifdef CONFIG_PM
+ struct dev_pm_domain pg_domain;
+#endif /* CONFIG_PM */
+
+ unsigned char rd_msg_buf[MEI_RD_MSG_BUF_SIZE];
+ u32 rd_msg_hdr;
+
+ /* write buffer */
+ bool hbuf_is_ready;
+
+ struct hbm_version version;
+ unsigned int hbm_f_pg_supported:1;
+ unsigned int hbm_f_dc_supported:1;
+ unsigned int hbm_f_dot_supported:1;
+ unsigned int hbm_f_ev_supported:1;
+ unsigned int hbm_f_fa_supported:1;
+ unsigned int hbm_f_ie_supported:1;
+ unsigned int hbm_f_os_supported:1;
+ unsigned int hbm_f_dr_supported:1;
+
+ struct mei_fw_version fw_ver[MEI_MAX_FW_VER_BLOCKS];
+
+ struct rw_semaphore me_clients_rwsem;
+ struct list_head me_clients;
+ DECLARE_BITMAP(me_clients_map, MEI_CLIENTS_MAX);
+ DECLARE_BITMAP(host_clients_map, MEI_CLIENTS_MAX);
+
+ bool allow_fixed_address;
+ bool override_fixed_address;
+
+ struct work_struct reset_work;
+ struct work_struct bus_rescan_work;
+
+ /* List of bus devices */
+ struct list_head device_list;
+ struct mutex cl_bus_lock;
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+ struct dentry *dbgfs_dir;
+#endif /* CONFIG_DEBUG_FS */
+
+
+ const struct mei_hw_ops *ops;
+ char hw[0] __aligned(sizeof(void *));
+};
+
+static inline unsigned long mei_secs_to_jiffies(unsigned long sec)
+{
+ return msecs_to_jiffies(sec * MSEC_PER_SEC);
+}
+
+/**
+ * mei_data2slots - get slots number from a message length
+ *
+ * @length: size of the messages in bytes
+ *
+ * Return: number of slots
+ */
+static inline u32 mei_data2slots(size_t length)
+{
+ return DIV_ROUND_UP(length, MEI_SLOT_SIZE);
+}
+
+/**
+ * mei_hbm2slots - get slots number from a hbm message length
+ * length + size of the mei message header
+ *
+ * @length: size of the messages in bytes
+ *
+ * Return: number of slots
+ */
+static inline u32 mei_hbm2slots(size_t length)
+{
+ return DIV_ROUND_UP(sizeof(struct mei_msg_hdr) + length, MEI_SLOT_SIZE);
+}
+
+/**
+ * mei_slots2data - get data in slots - bytes from slots
+ *
+ * @slots: number of available slots
+ *
+ * Return: number of bytes in slots
+ */
+static inline u32 mei_slots2data(int slots)
+{
+ return slots * MEI_SLOT_SIZE;
+}
+
+/*
+ * mei init function prototypes
+ */
+void mei_device_init(struct mei_device *dev,
+ struct device *device,
+ const struct mei_hw_ops *hw_ops);
+int mei_reset(struct mei_device *dev);
+int mei_start(struct mei_device *dev);
+int mei_restart(struct mei_device *dev);
+void mei_stop(struct mei_device *dev);
+void mei_cancel_work(struct mei_device *dev);
+
+/*
+ * MEI interrupt functions prototype
+ */
+
+void mei_timer(struct work_struct *work);
+void mei_schedule_stall_timer(struct mei_device *dev);
+int mei_irq_read_handler(struct mei_device *dev,
+ struct list_head *cmpl_list, s32 *slots);
+
+int mei_irq_write_handler(struct mei_device *dev, struct list_head *cmpl_list);
+void mei_irq_compl_handler(struct mei_device *dev, struct list_head *cmpl_list);
+
+/*
+ * Register Access Function
+ */
+
+
+static inline void mei_hw_config(struct mei_device *dev)
+{
+ dev->ops->hw_config(dev);
+}
+
+static inline enum mei_pg_state mei_pg_state(struct mei_device *dev)
+{
+ return dev->ops->pg_state(dev);
+}
+
+static inline bool mei_pg_in_transition(struct mei_device *dev)
+{
+ return dev->ops->pg_in_transition(dev);
+}
+
+static inline bool mei_pg_is_enabled(struct mei_device *dev)
+{
+ return dev->ops->pg_is_enabled(dev);
+}
+
+static inline int mei_hw_reset(struct mei_device *dev, bool enable)
+{
+ return dev->ops->hw_reset(dev, enable);
+}
+
+static inline int mei_hw_start(struct mei_device *dev)
+{
+ return dev->ops->hw_start(dev);
+}
+
+static inline void mei_clear_interrupts(struct mei_device *dev)
+{
+ dev->ops->intr_clear(dev);
+}
+
+static inline void mei_enable_interrupts(struct mei_device *dev)
+{
+ dev->ops->intr_enable(dev);
+}
+
+static inline void mei_disable_interrupts(struct mei_device *dev)
+{
+ dev->ops->intr_disable(dev);
+}
+
+static inline void mei_synchronize_irq(struct mei_device *dev)
+{
+ dev->ops->synchronize_irq(dev);
+}
+
+static inline bool mei_host_is_ready(struct mei_device *dev)
+{
+ return dev->ops->host_is_ready(dev);
+}
+static inline bool mei_hw_is_ready(struct mei_device *dev)
+{
+ return dev->ops->hw_is_ready(dev);
+}
+
+static inline bool mei_hbuf_is_ready(struct mei_device *dev)
+{
+ return dev->ops->hbuf_is_ready(dev);
+}
+
+static inline int mei_hbuf_empty_slots(struct mei_device *dev)
+{
+ return dev->ops->hbuf_free_slots(dev);
+}
+
+static inline u32 mei_hbuf_depth(const struct mei_device *dev)
+{
+ return dev->ops->hbuf_depth(dev);
+}
+
+static inline int mei_write_message(struct mei_device *dev,
+ const void *hdr, size_t hdr_len,
+ const void *data, size_t data_len)
+{
+ return dev->ops->write(dev, hdr, hdr_len, data, data_len);
+}
+
+static inline u32 mei_read_hdr(const struct mei_device *dev)
+{
+ return dev->ops->read_hdr(dev);
+}
+
+static inline void mei_read_slots(struct mei_device *dev,
+ unsigned char *buf, unsigned long len)
+{
+ dev->ops->read(dev, buf, len);
+}
+
+static inline int mei_count_full_read_slots(struct mei_device *dev)
+{
+ return dev->ops->rdbuf_full_slots(dev);
+}
+
+static inline int mei_fw_status(struct mei_device *dev,
+ struct mei_fw_status *fw_status)
+{
+ return dev->ops->fw_status(dev, fw_status);
+}
+
+bool mei_hbuf_acquire(struct mei_device *dev);
+
+bool mei_write_is_idle(struct mei_device *dev);
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+int mei_dbgfs_register(struct mei_device *dev, const char *name);
+void mei_dbgfs_deregister(struct mei_device *dev);
+#else
+static inline int mei_dbgfs_register(struct mei_device *dev, const char *name)
+{
+ return 0;
+}
+static inline void mei_dbgfs_deregister(struct mei_device *dev) {}
+#endif /* CONFIG_DEBUG_FS */
+
+int mei_register(struct mei_device *dev, struct device *parent);
+void mei_deregister(struct mei_device *dev);
+
+#define MEI_HDR_FMT "hdr:host=%02d me=%02d len=%d dma=%1d internal=%1d comp=%1d"
+#define MEI_HDR_PRM(hdr) \
+ (hdr)->host_addr, (hdr)->me_addr, \
+ (hdr)->length, (hdr)->dma_ring, (hdr)->internal, (hdr)->msg_complete
+
+ssize_t mei_fw_status2str(struct mei_fw_status *fw_sts, char *buf, size_t len);
+/**
+ * mei_fw_status_str - fetch and convert fw status registers to printable string
+ *
+ * @dev: the device structure
+ * @buf: string buffer at minimal size MEI_FW_STATUS_STR_SZ
+ * @len: buffer len must be >= MEI_FW_STATUS_STR_SZ
+ *
+ * Return: number of bytes written or < 0 on failure
+ */
+static inline ssize_t mei_fw_status_str(struct mei_device *dev,
+ char *buf, size_t len)
+{
+ struct mei_fw_status fw_status;
+ int ret;
+
+ buf[0] = '\0';
+
+ ret = mei_fw_status(dev, &fw_status);
+ if (ret)
+ return ret;
+
+ ret = mei_fw_status2str(&fw_status, buf, MEI_FW_STATUS_STR_SZ);
+
+ return ret;
+}
+
+
+#endif
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
new file mode 100644
index 0000000..ea4e152
--- /dev/null
+++ b/drivers/misc/mei/pci-me.c
@@ -0,0 +1,516 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/ioctl.h>
+#include <linux/cdev.h>
+#include <linux/sched.h>
+#include <linux/uuid.h>
+#include <linux/compat.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "client.h"
+#include "hw-me-regs.h"
+#include "hw-me.h"
+
+/* mei_pci_tbl - PCI Device ID Table */
+static const struct pci_device_id mei_me_pci_tbl[] = {
+ {MEI_PCI_DEVICE(MEI_DEV_ID_82946GZ, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_82G35, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_82Q965, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_82G965, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_82GM965, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_82GME965, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82Q35, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82G33, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82Q33, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82X38, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_3200, MEI_ME_ICH_CFG)},
+
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_6, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_7, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_8, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_9, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_10, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_1, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_2, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_3, MEI_ME_ICH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_4, MEI_ME_ICH_CFG)},
+
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_1, MEI_ME_ICH10_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_2, MEI_ME_ICH10_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_3, MEI_ME_ICH10_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_4, MEI_ME_ICH10_CFG)},
+
+ {MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_1, MEI_ME_PCH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_2, MEI_ME_PCH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CPT_1, MEI_ME_PCH_CPT_PBG_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_PBG_1, MEI_ME_PCH_CPT_PBG_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_1, MEI_ME_PCH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_2, MEI_ME_PCH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_3, MEI_ME_PCH_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_H, MEI_ME_PCH8_SPS_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_W, MEI_ME_PCH8_SPS_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_LP, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_HR, MEI_ME_PCH8_SPS_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_WPT_LP, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_WPT_LP_2, MEI_ME_PCH8_CFG)},
+
+ {MEI_PCI_DEVICE(MEI_DEV_ID_SPT, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_2, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, MEI_ME_PCH8_SPS_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, MEI_ME_PCH8_SPS_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_LBG, MEI_ME_PCH8_CFG)},
+
+ {MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, MEI_ME_PCH8_CFG)},
+
+ {MEI_PCI_DEVICE(MEI_DEV_ID_GLK, MEI_ME_PCH8_CFG)},
+
+ {MEI_PCI_DEVICE(MEI_DEV_ID_KBP, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_KBP_2, MEI_ME_PCH8_CFG)},
+
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP_4, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_4, MEI_ME_PCH8_CFG)},
+
+ /* required last entry */
+ {0, }
+};
+
+MODULE_DEVICE_TABLE(pci, mei_me_pci_tbl);
+
+#ifdef CONFIG_PM
+static inline void mei_me_set_pm_domain(struct mei_device *dev);
+static inline void mei_me_unset_pm_domain(struct mei_device *dev);
+#else
+static inline void mei_me_set_pm_domain(struct mei_device *dev) {}
+static inline void mei_me_unset_pm_domain(struct mei_device *dev) {}
+#endif /* CONFIG_PM */
+
+/**
+ * mei_me_quirk_probe - probe for devices that doesn't valid ME interface
+ *
+ * @pdev: PCI device structure
+ * @cfg: per generation config
+ *
+ * Return: true if ME Interface is valid, false otherwise
+ */
+static bool mei_me_quirk_probe(struct pci_dev *pdev,
+ const struct mei_cfg *cfg)
+{
+ if (cfg->quirk_probe && cfg->quirk_probe(pdev)) {
+ dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n");
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * mei_me_probe - Device Initialization Routine
+ *
+ * @pdev: PCI device structure
+ * @ent: entry in kcs_pci_tbl
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ const struct mei_cfg *cfg;
+ struct mei_device *dev;
+ struct mei_me_hw *hw;
+ unsigned int irqflags;
+ int err;
+
+ cfg = mei_me_get_cfg(ent->driver_data);
+ if (!cfg)
+ return -ENODEV;
+
+ if (!mei_me_quirk_probe(pdev, cfg))
+ return -ENODEV;
+
+ /* enable pci dev */
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable pci device.\n");
+ goto end;
+ }
+ /* set PCI host mastering */
+ pci_set_master(pdev);
+ /* pci request regions and mapping IO device memory for mei driver */
+ err = pcim_iomap_regions(pdev, BIT(0), KBUILD_MODNAME);
+ if (err) {
+ dev_err(&pdev->dev, "failed to get pci regions.\n");
+ goto end;
+ }
+
+ if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) ||
+ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err)
+ err = dma_set_coherent_mask(&pdev->dev,
+ DMA_BIT_MASK(32));
+ }
+ if (err) {
+ dev_err(&pdev->dev, "No usable DMA configuration, aborting\n");
+ goto end;
+ }
+
+ /* allocates and initializes the mei dev structure */
+ dev = mei_me_dev_init(pdev, cfg);
+ if (!dev) {
+ err = -ENOMEM;
+ goto end;
+ }
+ hw = to_me_hw(dev);
+ hw->mem_addr = pcim_iomap_table(pdev)[0];
+
+ pci_enable_msi(pdev);
+
+ /* request and enable interrupt */
+ irqflags = pci_dev_msi_enabled(pdev) ? IRQF_ONESHOT : IRQF_SHARED;
+
+ err = request_threaded_irq(pdev->irq,
+ mei_me_irq_quick_handler,
+ mei_me_irq_thread_handler,
+ irqflags, KBUILD_MODNAME, dev);
+ if (err) {
+ dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
+ pdev->irq);
+ goto end;
+ }
+
+ if (mei_start(dev)) {
+ dev_err(&pdev->dev, "init hw failure.\n");
+ err = -ENODEV;
+ goto release_irq;
+ }
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_ME_RPM_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
+
+ err = mei_register(dev, &pdev->dev);
+ if (err)
+ goto stop;
+
+ pci_set_drvdata(pdev, dev);
+
+ /*
+ * MEI requires to resume from runtime suspend mode
+ * in order to perform link reset flow upon system suspend.
+ */
+ dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+
+ /*
+ * ME maps runtime suspend/resume to D0i states,
+ * hence we need to go around native PCI runtime service which
+ * eventually brings the device into D3cold/hot state,
+ * but the mei device cannot wake up from D3 unlike from D0i3.
+ * To get around the PCI device native runtime pm,
+ * ME uses runtime pm domain handlers which take precedence
+ * over the driver's pm handlers.
+ */
+ mei_me_set_pm_domain(dev);
+
+ if (mei_pg_is_enabled(dev)) {
+ pm_runtime_put_noidle(&pdev->dev);
+ if (hw->d0i3_supported)
+ pm_runtime_allow(&pdev->dev);
+ }
+
+ dev_dbg(&pdev->dev, "initialization successful.\n");
+
+ return 0;
+
+stop:
+ mei_stop(dev);
+release_irq:
+ mei_cancel_work(dev);
+ mei_disable_interrupts(dev);
+ free_irq(pdev->irq, dev);
+end:
+ dev_err(&pdev->dev, "initialization failed.\n");
+ return err;
+}
+
+/**
+ * mei_me_shutdown - Device Removal Routine
+ *
+ * @pdev: PCI device structure
+ *
+ * mei_me_shutdown is called from the reboot notifier
+ * it's a simplified version of remove so we go down
+ * faster.
+ */
+static void mei_me_shutdown(struct pci_dev *pdev)
+{
+ struct mei_device *dev;
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return;
+
+ dev_dbg(&pdev->dev, "shutdown\n");
+ mei_stop(dev);
+
+ mei_me_unset_pm_domain(dev);
+
+ mei_disable_interrupts(dev);
+ free_irq(pdev->irq, dev);
+}
+
+/**
+ * mei_me_remove - Device Removal Routine
+ *
+ * @pdev: PCI device structure
+ *
+ * mei_me_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.
+ */
+static void mei_me_remove(struct pci_dev *pdev)
+{
+ struct mei_device *dev;
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return;
+
+ if (mei_pg_is_enabled(dev))
+ pm_runtime_get_noresume(&pdev->dev);
+
+ dev_dbg(&pdev->dev, "stop\n");
+ mei_stop(dev);
+
+ mei_me_unset_pm_domain(dev);
+
+ mei_disable_interrupts(dev);
+
+ free_irq(pdev->irq, dev);
+
+ mei_deregister(dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mei_me_pci_suspend(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev = pci_get_drvdata(pdev);
+
+ if (!dev)
+ return -ENODEV;
+
+ dev_dbg(&pdev->dev, "suspend\n");
+
+ mei_stop(dev);
+
+ mei_disable_interrupts(dev);
+
+ free_irq(pdev->irq, dev);
+ pci_disable_msi(pdev);
+
+ return 0;
+}
+
+static int mei_me_pci_resume(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev;
+ unsigned int irqflags;
+ int err;
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return -ENODEV;
+
+ pci_enable_msi(pdev);
+
+ irqflags = pci_dev_msi_enabled(pdev) ? IRQF_ONESHOT : IRQF_SHARED;
+
+ /* request and enable interrupt */
+ err = request_threaded_irq(pdev->irq,
+ mei_me_irq_quick_handler,
+ mei_me_irq_thread_handler,
+ irqflags, KBUILD_MODNAME, dev);
+
+ if (err) {
+ dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",
+ pdev->irq);
+ return err;
+ }
+
+ err = mei_restart(dev);
+ if (err)
+ return err;
+
+ /* Start timer if stopped in suspend */
+ schedule_delayed_work(&dev->timer_work, HZ);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+static int mei_me_pm_runtime_idle(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev;
+
+ dev_dbg(&pdev->dev, "rpm: me: runtime_idle\n");
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return -ENODEV;
+ if (mei_write_is_idle(dev))
+ pm_runtime_autosuspend(device);
+
+ return -EBUSY;
+}
+
+static int mei_me_pm_runtime_suspend(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev;
+ int ret;
+
+ dev_dbg(&pdev->dev, "rpm: me: runtime suspend\n");
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&dev->device_lock);
+
+ if (mei_write_is_idle(dev))
+ ret = mei_me_pg_enter_sync(dev);
+ else
+ ret = -EAGAIN;
+
+ mutex_unlock(&dev->device_lock);
+
+ dev_dbg(&pdev->dev, "rpm: me: runtime suspend ret=%d\n", ret);
+
+ if (ret && ret != -EAGAIN)
+ schedule_work(&dev->reset_work);
+
+ return ret;
+}
+
+static int mei_me_pm_runtime_resume(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev;
+ int ret;
+
+ dev_dbg(&pdev->dev, "rpm: me: runtime resume\n");
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&dev->device_lock);
+
+ ret = mei_me_pg_exit_sync(dev);
+
+ mutex_unlock(&dev->device_lock);
+
+ dev_dbg(&pdev->dev, "rpm: me: runtime resume ret = %d\n", ret);
+
+ if (ret)
+ schedule_work(&dev->reset_work);
+
+ return ret;
+}
+
+/**
+ * mei_me_set_pm_domain - fill and set pm domain structure for device
+ *
+ * @dev: mei_device
+ */
+static inline void mei_me_set_pm_domain(struct mei_device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+ if (pdev->dev.bus && pdev->dev.bus->pm) {
+ dev->pg_domain.ops = *pdev->dev.bus->pm;
+
+ dev->pg_domain.ops.runtime_suspend = mei_me_pm_runtime_suspend;
+ dev->pg_domain.ops.runtime_resume = mei_me_pm_runtime_resume;
+ dev->pg_domain.ops.runtime_idle = mei_me_pm_runtime_idle;
+
+ dev_pm_domain_set(&pdev->dev, &dev->pg_domain);
+ }
+}
+
+/**
+ * mei_me_unset_pm_domain - clean pm domain structure for device
+ *
+ * @dev: mei_device
+ */
+static inline void mei_me_unset_pm_domain(struct mei_device *dev)
+{
+ /* stop using pm callbacks if any */
+ dev_pm_domain_set(dev->dev, NULL);
+}
+
+static const struct dev_pm_ops mei_me_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(mei_me_pci_suspend,
+ mei_me_pci_resume)
+ SET_RUNTIME_PM_OPS(
+ mei_me_pm_runtime_suspend,
+ mei_me_pm_runtime_resume,
+ mei_me_pm_runtime_idle)
+};
+
+#define MEI_ME_PM_OPS (&mei_me_pm_ops)
+#else
+#define MEI_ME_PM_OPS NULL
+#endif /* CONFIG_PM */
+/*
+ * PCI driver structure
+ */
+static struct pci_driver mei_me_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = mei_me_pci_tbl,
+ .probe = mei_me_probe,
+ .remove = mei_me_remove,
+ .shutdown = mei_me_shutdown,
+ .driver.pm = MEI_ME_PM_OPS,
+ .driver.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+};
+
+module_pci_driver(mei_me_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("Intel(R) Management Engine Interface");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
new file mode 100644
index 0000000..e1b9091
--- /dev/null
+++ b/drivers/misc/mei/pci-txe.c
@@ -0,0 +1,422 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2013-2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/uuid.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mei.h>
+
+
+#include "mei_dev.h"
+#include "hw-txe.h"
+
+static const struct pci_device_id mei_txe_pci_tbl[] = {
+ {PCI_VDEVICE(INTEL, 0x0F18)}, /* Baytrail */
+ {PCI_VDEVICE(INTEL, 0x2298)}, /* Cherrytrail */
+
+ {0, }
+};
+MODULE_DEVICE_TABLE(pci, mei_txe_pci_tbl);
+
+#ifdef CONFIG_PM
+static inline void mei_txe_set_pm_domain(struct mei_device *dev);
+static inline void mei_txe_unset_pm_domain(struct mei_device *dev);
+#else
+static inline void mei_txe_set_pm_domain(struct mei_device *dev) {}
+static inline void mei_txe_unset_pm_domain(struct mei_device *dev) {}
+#endif /* CONFIG_PM */
+
+/**
+ * mei_txe_probe - Device Initialization Routine
+ *
+ * @pdev: PCI device structure
+ * @ent: entry in mei_txe_pci_tbl
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct mei_device *dev;
+ struct mei_txe_hw *hw;
+ const int mask = BIT(SEC_BAR) | BIT(BRIDGE_BAR);
+ int err;
+
+ /* enable pci dev */
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable pci device.\n");
+ goto end;
+ }
+ /* set PCI host mastering */
+ pci_set_master(pdev);
+ /* pci request regions and mapping IO device memory for mei driver */
+ err = pcim_iomap_regions(pdev, mask, KBUILD_MODNAME);
+ if (err) {
+ dev_err(&pdev->dev, "failed to get pci regions.\n");
+ goto end;
+ }
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
+ if (err) {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "No suitable DMA available.\n");
+ goto end;
+ }
+ }
+
+ /* allocates and initializes the mei dev structure */
+ dev = mei_txe_dev_init(pdev);
+ if (!dev) {
+ err = -ENOMEM;
+ goto end;
+ }
+ hw = to_txe_hw(dev);
+ hw->mem_addr = pcim_iomap_table(pdev);
+
+ pci_enable_msi(pdev);
+
+ /* clear spurious interrupts */
+ mei_clear_interrupts(dev);
+
+ /* request and enable interrupt */
+ if (pci_dev_msi_enabled(pdev))
+ err = request_threaded_irq(pdev->irq,
+ NULL,
+ mei_txe_irq_thread_handler,
+ IRQF_ONESHOT, KBUILD_MODNAME, dev);
+ else
+ err = request_threaded_irq(pdev->irq,
+ mei_txe_irq_quick_handler,
+ mei_txe_irq_thread_handler,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ if (err) {
+ dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n",
+ pdev->irq);
+ goto end;
+ }
+
+ if (mei_start(dev)) {
+ dev_err(&pdev->dev, "init hw failure.\n");
+ err = -ENODEV;
+ goto release_irq;
+ }
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_TXI_RPM_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
+
+ err = mei_register(dev, &pdev->dev);
+ if (err)
+ goto stop;
+
+ pci_set_drvdata(pdev, dev);
+
+ /*
+ * MEI requires to resume from runtime suspend mode
+ * in order to perform link reset flow upon system suspend.
+ */
+ dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+
+ /*
+ * TXE maps runtime suspend/resume to own power gating states,
+ * hence we need to go around native PCI runtime service which
+ * eventually brings the device into D3cold/hot state.
+ * But the TXE device cannot wake up from D3 unlike from own
+ * power gating. To get around PCI device native runtime pm,
+ * TXE uses runtime pm domain handlers which take precedence.
+ */
+ mei_txe_set_pm_domain(dev);
+
+ pm_runtime_put_noidle(&pdev->dev);
+
+ return 0;
+
+stop:
+ mei_stop(dev);
+release_irq:
+ mei_cancel_work(dev);
+ mei_disable_interrupts(dev);
+ free_irq(pdev->irq, dev);
+end:
+ dev_err(&pdev->dev, "initialization failed.\n");
+ return err;
+}
+
+/**
+ * mei_txe_remove - Device Shutdown Routine
+ *
+ * @pdev: PCI device structure
+ *
+ * mei_txe_shutdown is called from the reboot notifier
+ * it's a simplified version of remove so we go down
+ * faster.
+ */
+static void mei_txe_shutdown(struct pci_dev *pdev)
+{
+ struct mei_device *dev;
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return;
+
+ dev_dbg(&pdev->dev, "shutdown\n");
+ mei_stop(dev);
+
+ mei_txe_unset_pm_domain(dev);
+
+ mei_disable_interrupts(dev);
+ free_irq(pdev->irq, dev);
+}
+
+/**
+ * mei_txe_remove - Device Removal Routine
+ *
+ * @pdev: PCI device structure
+ *
+ * mei_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.
+ */
+static void mei_txe_remove(struct pci_dev *pdev)
+{
+ struct mei_device *dev;
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev) {
+ dev_err(&pdev->dev, "mei: dev == NULL\n");
+ return;
+ }
+
+ pm_runtime_get_noresume(&pdev->dev);
+
+ mei_stop(dev);
+
+ mei_txe_unset_pm_domain(dev);
+
+ mei_disable_interrupts(dev);
+ free_irq(pdev->irq, dev);
+
+ mei_deregister(dev);
+}
+
+
+#ifdef CONFIG_PM_SLEEP
+static int mei_txe_pci_suspend(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev = pci_get_drvdata(pdev);
+
+ if (!dev)
+ return -ENODEV;
+
+ dev_dbg(&pdev->dev, "suspend\n");
+
+ mei_stop(dev);
+
+ mei_disable_interrupts(dev);
+
+ free_irq(pdev->irq, dev);
+ pci_disable_msi(pdev);
+
+ return 0;
+}
+
+static int mei_txe_pci_resume(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev;
+ int err;
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return -ENODEV;
+
+ pci_enable_msi(pdev);
+
+ mei_clear_interrupts(dev);
+
+ /* request and enable interrupt */
+ if (pci_dev_msi_enabled(pdev))
+ err = request_threaded_irq(pdev->irq,
+ NULL,
+ mei_txe_irq_thread_handler,
+ IRQF_ONESHOT, KBUILD_MODNAME, dev);
+ else
+ err = request_threaded_irq(pdev->irq,
+ mei_txe_irq_quick_handler,
+ mei_txe_irq_thread_handler,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ if (err) {
+ dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",
+ pdev->irq);
+ return err;
+ }
+
+ err = mei_restart(dev);
+
+ return err;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+static int mei_txe_pm_runtime_idle(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev;
+
+ dev_dbg(&pdev->dev, "rpm: txe: runtime_idle\n");
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return -ENODEV;
+ if (mei_write_is_idle(dev))
+ pm_runtime_autosuspend(device);
+
+ return -EBUSY;
+}
+static int mei_txe_pm_runtime_suspend(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev;
+ int ret;
+
+ dev_dbg(&pdev->dev, "rpm: txe: runtime suspend\n");
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&dev->device_lock);
+
+ if (mei_write_is_idle(dev))
+ ret = mei_txe_aliveness_set_sync(dev, 0);
+ else
+ ret = -EAGAIN;
+
+ /* keep irq on we are staying in D0 */
+
+ dev_dbg(&pdev->dev, "rpm: txe: runtime suspend ret=%d\n", ret);
+
+ mutex_unlock(&dev->device_lock);
+
+ if (ret && ret != -EAGAIN)
+ schedule_work(&dev->reset_work);
+
+ return ret;
+}
+
+static int mei_txe_pm_runtime_resume(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev;
+ int ret;
+
+ dev_dbg(&pdev->dev, "rpm: txe: runtime resume\n");
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&dev->device_lock);
+
+ mei_enable_interrupts(dev);
+
+ ret = mei_txe_aliveness_set_sync(dev, 1);
+
+ mutex_unlock(&dev->device_lock);
+
+ dev_dbg(&pdev->dev, "rpm: txe: runtime resume ret = %d\n", ret);
+
+ if (ret)
+ schedule_work(&dev->reset_work);
+
+ return ret;
+}
+
+/**
+ * mei_txe_set_pm_domain - fill and set pm domain structure for device
+ *
+ * @dev: mei_device
+ */
+static inline void mei_txe_set_pm_domain(struct mei_device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+ if (pdev->dev.bus && pdev->dev.bus->pm) {
+ dev->pg_domain.ops = *pdev->dev.bus->pm;
+
+ dev->pg_domain.ops.runtime_suspend = mei_txe_pm_runtime_suspend;
+ dev->pg_domain.ops.runtime_resume = mei_txe_pm_runtime_resume;
+ dev->pg_domain.ops.runtime_idle = mei_txe_pm_runtime_idle;
+
+ dev_pm_domain_set(&pdev->dev, &dev->pg_domain);
+ }
+}
+
+/**
+ * mei_txe_unset_pm_domain - clean pm domain structure for device
+ *
+ * @dev: mei_device
+ */
+static inline void mei_txe_unset_pm_domain(struct mei_device *dev)
+{
+ /* stop using pm callbacks if any */
+ dev_pm_domain_set(dev->dev, NULL);
+}
+
+static const struct dev_pm_ops mei_txe_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(mei_txe_pci_suspend,
+ mei_txe_pci_resume)
+ SET_RUNTIME_PM_OPS(
+ mei_txe_pm_runtime_suspend,
+ mei_txe_pm_runtime_resume,
+ mei_txe_pm_runtime_idle)
+};
+
+#define MEI_TXE_PM_OPS (&mei_txe_pm_ops)
+#else
+#define MEI_TXE_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+/*
+ * PCI driver structure
+ */
+static struct pci_driver mei_txe_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = mei_txe_pci_tbl,
+ .probe = mei_txe_probe,
+ .remove = mei_txe_remove,
+ .shutdown = mei_txe_shutdown,
+ .driver.pm = MEI_TXE_PM_OPS,
+};
+
+module_pci_driver(mei_txe_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("Intel(R) Trusted Execution Environment Interface");
+MODULE_LICENSE("GPL v2");