v4.19.13 snapshot.
diff --git a/drivers/media/pci/cobalt/cobalt-i2c.c b/drivers/media/pci/cobalt/cobalt-i2c.c
new file mode 100644
index 0000000..c374dae
--- /dev/null
+++ b/drivers/media/pci/cobalt/cobalt-i2c.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * cobalt I2C functions
+ *
+ * Derived from cx18-i2c.c
+ *
+ * Copyright 2012-2015 Cisco Systems, Inc. and/or its affiliates.
+ * All rights reserved.
+ */
+
+#include "cobalt-driver.h"
+#include "cobalt-i2c.h"
+
+struct cobalt_i2c_regs {
+ /* Clock prescaler register lo-byte */
+ u8 prerlo;
+ u8 dummy0[3];
+ /* Clock prescaler register high-byte */
+ u8 prerhi;
+ u8 dummy1[3];
+ /* Control register */
+ u8 ctr;
+ u8 dummy2[3];
+ /* Transmit/Receive register */
+ u8 txr_rxr;
+ u8 dummy3[3];
+ /* Command and Status register */
+ u8 cr_sr;
+ u8 dummy4[3];
+};
+
+/* CTR[7:0] - Control register */
+
+/* I2C Core enable bit */
+#define M00018_CTR_BITMAP_EN_MSK (1 << 7)
+
+/* I2C Core interrupt enable bit */
+#define M00018_CTR_BITMAP_IEN_MSK (1 << 6)
+
+/* CR[7:0] - Command register */
+
+/* I2C start condition */
+#define M00018_CR_BITMAP_STA_MSK (1 << 7)
+
+/* I2C stop condition */
+#define M00018_CR_BITMAP_STO_MSK (1 << 6)
+
+/* I2C read from slave */
+#define M00018_CR_BITMAP_RD_MSK (1 << 5)
+
+/* I2C write to slave */
+#define M00018_CR_BITMAP_WR_MSK (1 << 4)
+
+/* I2C ack */
+#define M00018_CR_BITMAP_ACK_MSK (1 << 3)
+
+/* I2C Interrupt ack */
+#define M00018_CR_BITMAP_IACK_MSK (1 << 0)
+
+/* SR[7:0] - Status register */
+
+/* Receive acknowledge from slave */
+#define M00018_SR_BITMAP_RXACK_MSK (1 << 7)
+
+/* Busy, I2C bus busy (as defined by start / stop bits) */
+#define M00018_SR_BITMAP_BUSY_MSK (1 << 6)
+
+/* Arbitration lost - core lost arbitration */
+#define M00018_SR_BITMAP_AL_MSK (1 << 5)
+
+/* Transfer in progress */
+#define M00018_SR_BITMAP_TIP_MSK (1 << 1)
+
+/* Interrupt flag */
+#define M00018_SR_BITMAP_IF_MSK (1 << 0)
+
+/* Frequency, in Hz */
+#define I2C_FREQUENCY 400000
+#define ALT_CPU_FREQ 83333333
+
+static struct cobalt_i2c_regs __iomem *
+cobalt_i2c_regs(struct cobalt *cobalt, unsigned idx)
+{
+ switch (idx) {
+ case 0:
+ default:
+ return (struct cobalt_i2c_regs __iomem *)
+ (cobalt->bar1 + COBALT_I2C_0_BASE);
+ case 1:
+ return (struct cobalt_i2c_regs __iomem *)
+ (cobalt->bar1 + COBALT_I2C_1_BASE);
+ case 2:
+ return (struct cobalt_i2c_regs __iomem *)
+ (cobalt->bar1 + COBALT_I2C_2_BASE);
+ case 3:
+ return (struct cobalt_i2c_regs __iomem *)
+ (cobalt->bar1 + COBALT_I2C_3_BASE);
+ case 4:
+ return (struct cobalt_i2c_regs __iomem *)
+ (cobalt->bar1 + COBALT_I2C_HSMA_BASE);
+ }
+}
+
+/* Do low-level i2c byte transfer.
+ * Returns -1 in case of an error or 0 otherwise.
+ */
+static int cobalt_tx_bytes(struct cobalt_i2c_regs __iomem *regs,
+ struct i2c_adapter *adap, bool start, bool stop,
+ u8 *data, u16 len)
+{
+ unsigned long start_time;
+ int status;
+ int cmd;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ /* Setup data */
+ iowrite8(data[i], ®s->txr_rxr);
+
+ /* Setup command */
+ if (i == 0 && start != 0) {
+ /* Write + Start */
+ cmd = M00018_CR_BITMAP_WR_MSK |
+ M00018_CR_BITMAP_STA_MSK;
+ } else if (i == len - 1 && stop != 0) {
+ /* Write + Stop */
+ cmd = M00018_CR_BITMAP_WR_MSK |
+ M00018_CR_BITMAP_STO_MSK;
+ } else {
+ /* Write only */
+ cmd = M00018_CR_BITMAP_WR_MSK;
+ }
+
+ /* Execute command */
+ iowrite8(cmd, ®s->cr_sr);
+
+ /* Wait for transfer to complete (TIP = 0) */
+ start_time = jiffies;
+ status = ioread8(®s->cr_sr);
+ while (status & M00018_SR_BITMAP_TIP_MSK) {
+ if (time_after(jiffies, start_time + adap->timeout))
+ return -ETIMEDOUT;
+ cond_resched();
+ status = ioread8(®s->cr_sr);
+ }
+
+ /* Verify ACK */
+ if (status & M00018_SR_BITMAP_RXACK_MSK) {
+ /* NO ACK! */
+ return -EIO;
+ }
+
+ /* Verify arbitration */
+ if (status & M00018_SR_BITMAP_AL_MSK) {
+ /* Arbitration lost! */
+ return -EIO;
+ }
+ }
+ return 0;
+}
+
+/* Do low-level i2c byte read.
+ * Returns -1 in case of an error or 0 otherwise.
+ */
+static int cobalt_rx_bytes(struct cobalt_i2c_regs __iomem *regs,
+ struct i2c_adapter *adap, bool start, bool stop,
+ u8 *data, u16 len)
+{
+ unsigned long start_time;
+ int status;
+ int cmd;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ /* Setup command */
+ if (i == 0 && start != 0) {
+ /* Read + Start */
+ cmd = M00018_CR_BITMAP_RD_MSK |
+ M00018_CR_BITMAP_STA_MSK;
+ } else if (i == len - 1 && stop != 0) {
+ /* Read + Stop */
+ cmd = M00018_CR_BITMAP_RD_MSK |
+ M00018_CR_BITMAP_STO_MSK;
+ } else {
+ /* Read only */
+ cmd = M00018_CR_BITMAP_RD_MSK;
+ }
+
+ /* Last byte to read, no ACK */
+ if (i == len - 1)
+ cmd |= M00018_CR_BITMAP_ACK_MSK;
+
+ /* Execute command */
+ iowrite8(cmd, ®s->cr_sr);
+
+ /* Wait for transfer to complete (TIP = 0) */
+ start_time = jiffies;
+ status = ioread8(®s->cr_sr);
+ while (status & M00018_SR_BITMAP_TIP_MSK) {
+ if (time_after(jiffies, start_time + adap->timeout))
+ return -ETIMEDOUT;
+ cond_resched();
+ status = ioread8(®s->cr_sr);
+ }
+
+ /* Verify arbitration */
+ if (status & M00018_SR_BITMAP_AL_MSK) {
+ /* Arbitration lost! */
+ return -EIO;
+ }
+
+ /* Store data */
+ data[i] = ioread8(®s->txr_rxr);
+ }
+ return 0;
+}
+
+/* Generate stop condition on i2c bus.
+ * The m00018 stop isn't doing the right thing (wrong timing).
+ * So instead send a start condition, 8 zeroes and a stop condition.
+ */
+static int cobalt_stop(struct cobalt_i2c_regs __iomem *regs,
+ struct i2c_adapter *adap)
+{
+ u8 data = 0;
+
+ return cobalt_tx_bytes(regs, adap, true, true, &data, 1);
+}
+
+static int cobalt_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct cobalt_i2c_data *data = adap->algo_data;
+ struct cobalt_i2c_regs __iomem *regs = data->regs;
+ struct i2c_msg *pmsg;
+ unsigned short flags;
+ int ret = 0;
+ int i, j;
+
+ for (i = 0; i < num; i++) {
+ int stop = (i == num - 1);
+
+ pmsg = &msgs[i];
+ flags = pmsg->flags;
+
+ if (!(pmsg->flags & I2C_M_NOSTART)) {
+ u8 addr = pmsg->addr << 1;
+
+ if (flags & I2C_M_RD)
+ addr |= 1;
+ if (flags & I2C_M_REV_DIR_ADDR)
+ addr ^= 1;
+ for (j = 0; j < adap->retries; j++) {
+ ret = cobalt_tx_bytes(regs, adap, true, false,
+ &addr, 1);
+ if (!ret)
+ break;
+ cobalt_stop(regs, adap);
+ }
+ if (ret < 0)
+ return ret;
+ ret = 0;
+ }
+ if (pmsg->flags & I2C_M_RD) {
+ /* read bytes into buffer */
+ ret = cobalt_rx_bytes(regs, adap, false, stop,
+ pmsg->buf, pmsg->len);
+ if (ret < 0)
+ goto bailout;
+ } else {
+ /* write bytes from buffer */
+ ret = cobalt_tx_bytes(regs, adap, false, stop,
+ pmsg->buf, pmsg->len);
+ if (ret < 0)
+ goto bailout;
+ }
+ }
+ ret = i;
+
+bailout:
+ if (ret < 0)
+ cobalt_stop(regs, adap);
+ return ret;
+}
+
+static u32 cobalt_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+/* template for i2c-bit-algo */
+static const struct i2c_adapter cobalt_i2c_adap_template = {
+ .name = "cobalt i2c driver",
+ .algo = NULL, /* set by i2c-algo-bit */
+ .algo_data = NULL, /* filled from template */
+ .owner = THIS_MODULE,
+};
+
+static const struct i2c_algorithm cobalt_algo = {
+ .master_xfer = cobalt_xfer,
+ .functionality = cobalt_func,
+};
+
+/* init + register i2c algo-bit adapter */
+int cobalt_i2c_init(struct cobalt *cobalt)
+{
+ int i, err;
+ int status;
+ int prescale;
+ unsigned long start_time;
+
+ cobalt_dbg(1, "i2c init\n");
+
+ /* Define I2C clock prescaler */
+ prescale = ((ALT_CPU_FREQ) / (5 * I2C_FREQUENCY)) - 1;
+
+ for (i = 0; i < COBALT_NUM_ADAPTERS; i++) {
+ struct cobalt_i2c_regs __iomem *regs =
+ cobalt_i2c_regs(cobalt, i);
+ struct i2c_adapter *adap = &cobalt->i2c_adap[i];
+
+ /* Disable I2C */
+ iowrite8(M00018_CTR_BITMAP_EN_MSK, ®s->cr_sr);
+ iowrite8(0, ®s->ctr);
+ iowrite8(0, ®s->cr_sr);
+
+ start_time = jiffies;
+ do {
+ if (time_after(jiffies, start_time + HZ)) {
+ if (cobalt_ignore_err) {
+ adap->dev.parent = NULL;
+ return 0;
+ }
+ return -ETIMEDOUT;
+ }
+ status = ioread8(®s->cr_sr);
+ } while (status & M00018_SR_BITMAP_TIP_MSK);
+
+ /* Disable I2C */
+ iowrite8(0, ®s->ctr);
+ iowrite8(0, ®s->cr_sr);
+
+ /* Calculate i2c prescaler */
+ iowrite8(prescale & 0xff, ®s->prerlo);
+ iowrite8((prescale >> 8) & 0xff, ®s->prerhi);
+ /* Enable I2C, interrupts disabled */
+ iowrite8(M00018_CTR_BITMAP_EN_MSK, ®s->ctr);
+ /* Setup algorithm for adapter */
+ cobalt->i2c_data[i].cobalt = cobalt;
+ cobalt->i2c_data[i].regs = regs;
+ *adap = cobalt_i2c_adap_template;
+ adap->algo = &cobalt_algo;
+ adap->algo_data = &cobalt->i2c_data[i];
+ adap->retries = 3;
+ sprintf(adap->name + strlen(adap->name),
+ " #%d-%d", cobalt->instance, i);
+ i2c_set_adapdata(adap, &cobalt->v4l2_dev);
+ adap->dev.parent = &cobalt->pci_dev->dev;
+ err = i2c_add_adapter(adap);
+ if (err) {
+ if (cobalt_ignore_err) {
+ adap->dev.parent = NULL;
+ return 0;
+ }
+ while (i--)
+ i2c_del_adapter(&cobalt->i2c_adap[i]);
+ return err;
+ }
+ cobalt_info("registered bus %s\n", adap->name);
+ }
+ return 0;
+}
+
+void cobalt_i2c_exit(struct cobalt *cobalt)
+{
+ int i;
+
+ cobalt_dbg(1, "i2c exit\n");
+
+ for (i = 0; i < COBALT_NUM_ADAPTERS; i++) {
+ cobalt_err("unregistered bus %s\n", cobalt->i2c_adap[i].name);
+ i2c_del_adapter(&cobalt->i2c_adap[i]);
+ }
+}