v4.19.13 snapshot.
diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c
new file mode 100644
index 0000000..b9e6860
--- /dev/null
+++ b/drivers/input/mouse/inport.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright (c) 1999-2001 Vojtech Pavlik
+ *
+ * Based on the work of:
+ * Teemu Rantanen Derrick Cole
+ * Peter Cervasio Christoph Niemann
+ * Philip Blundell Russell King
+ * Bob Harris
+ */
+
+/*
+ * Inport (ATI XL and Microsoft) busmouse driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Inport (ATI XL and Microsoft) busmouse driver");
+MODULE_LICENSE("GPL");
+
+#define INPORT_BASE 0x23c
+#define INPORT_EXTENT 4
+
+#define INPORT_CONTROL_PORT INPORT_BASE + 0
+#define INPORT_DATA_PORT INPORT_BASE + 1
+#define INPORT_SIGNATURE_PORT INPORT_BASE + 2
+
+#define INPORT_REG_BTNS 0x00
+#define INPORT_REG_X 0x01
+#define INPORT_REG_Y 0x02
+#define INPORT_REG_MODE 0x07
+#define INPORT_RESET 0x80
+
+#ifdef CONFIG_MOUSE_ATIXL
+#define INPORT_NAME "ATI XL Mouse"
+#define INPORT_VENDOR 0x0002
+#define INPORT_SPEED_30HZ 0x01
+#define INPORT_SPEED_50HZ 0x02
+#define INPORT_SPEED_100HZ 0x03
+#define INPORT_SPEED_200HZ 0x04
+#define INPORT_MODE_BASE INPORT_SPEED_100HZ
+#define INPORT_MODE_IRQ 0x08
+#else
+#define INPORT_NAME "Microsoft InPort Mouse"
+#define INPORT_VENDOR 0x0001
+#define INPORT_MODE_BASE 0x10
+#define INPORT_MODE_IRQ 0x01
+#endif
+#define INPORT_MODE_HOLD 0x20
+
+#define INPORT_IRQ 5
+
+static int inport_irq = INPORT_IRQ;
+module_param_hw_named(irq, inport_irq, uint, irq, 0);
+MODULE_PARM_DESC(irq, "IRQ number (5=default)");
+
+static struct input_dev *inport_dev;
+
+static irqreturn_t inport_interrupt(int irq, void *dev_id)
+{
+ unsigned char buttons;
+
+ outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+ outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+ outb(INPORT_REG_X, INPORT_CONTROL_PORT);
+ input_report_rel(inport_dev, REL_X, inb(INPORT_DATA_PORT));
+
+ outb(INPORT_REG_Y, INPORT_CONTROL_PORT);
+ input_report_rel(inport_dev, REL_Y, inb(INPORT_DATA_PORT));
+
+ outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT);
+ buttons = inb(INPORT_DATA_PORT);
+
+ input_report_key(inport_dev, BTN_MIDDLE, buttons & 1);
+ input_report_key(inport_dev, BTN_LEFT, buttons & 2);
+ input_report_key(inport_dev, BTN_RIGHT, buttons & 4);
+
+ outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+ outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+ input_sync(inport_dev);
+ return IRQ_HANDLED;
+}
+
+static int inport_open(struct input_dev *dev)
+{
+ if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL))
+ return -EBUSY;
+ outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+ outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+ return 0;
+}
+
+static void inport_close(struct input_dev *dev)
+{
+ outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+ outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
+ free_irq(inport_irq, NULL);
+}
+
+static int __init inport_init(void)
+{
+ unsigned char a, b, c;
+ int err;
+
+ if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) {
+ printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE);
+ return -EBUSY;
+ }
+
+ a = inb(INPORT_SIGNATURE_PORT);
+ b = inb(INPORT_SIGNATURE_PORT);
+ c = inb(INPORT_SIGNATURE_PORT);
+ if (a == b || a != c) {
+ printk(KERN_INFO "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
+ err = -ENODEV;
+ goto err_release_region;
+ }
+
+ inport_dev = input_allocate_device();
+ if (!inport_dev) {
+ printk(KERN_ERR "inport.c: Not enough memory for input device\n");
+ err = -ENOMEM;
+ goto err_release_region;
+ }
+
+ inport_dev->name = INPORT_NAME;
+ inport_dev->phys = "isa023c/input0";
+ inport_dev->id.bustype = BUS_ISA;
+ inport_dev->id.vendor = INPORT_VENDOR;
+ inport_dev->id.product = 0x0001;
+ inport_dev->id.version = 0x0100;
+
+ inport_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+ inport_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
+ BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+ inport_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+
+ inport_dev->open = inport_open;
+ inport_dev->close = inport_close;
+
+ outb(INPORT_RESET, INPORT_CONTROL_PORT);
+ outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+ outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+ err = input_register_device(inport_dev);
+ if (err)
+ goto err_free_dev;
+
+ return 0;
+
+ err_free_dev:
+ input_free_device(inport_dev);
+ err_release_region:
+ release_region(INPORT_BASE, INPORT_EXTENT);
+
+ return err;
+}
+
+static void __exit inport_exit(void)
+{
+ input_unregister_device(inport_dev);
+ release_region(INPORT_BASE, INPORT_EXTENT);
+}
+
+module_init(inport_init);
+module_exit(inport_exit);