v4.19.13 snapshot.
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
new file mode 100644
index 0000000..f10443f
--- /dev/null
+++ b/drivers/iio/adc/exynos_adc.c
@@ -0,0 +1,988 @@
+/*
+ * exynos_adc.c - Support for ADC in EXYNOS SoCs
+ *
+ * 8 ~ 10 channel, 10/12-bit ADC
+ *
+ * Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+#include <linux/input.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
+/* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
+#define ADC_V1_CON(x) ((x) + 0x00)
+#define ADC_V1_TSC(x) ((x) + 0x04)
+#define ADC_V1_DLY(x) ((x) + 0x08)
+#define ADC_V1_DATX(x) ((x) + 0x0C)
+#define ADC_V1_DATY(x) ((x) + 0x10)
+#define ADC_V1_UPDN(x) ((x) + 0x14)
+#define ADC_V1_INTCLR(x) ((x) + 0x18)
+#define ADC_V1_MUX(x) ((x) + 0x1c)
+#define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20)
+
+/* S3C2410 ADC registers definitions */
+#define ADC_S3C2410_MUX(x) ((x) + 0x18)
+
+/* Future ADC_V2 registers definitions */
+#define ADC_V2_CON1(x) ((x) + 0x00)
+#define ADC_V2_CON2(x) ((x) + 0x04)
+#define ADC_V2_STAT(x) ((x) + 0x08)
+#define ADC_V2_INT_EN(x) ((x) + 0x10)
+#define ADC_V2_INT_ST(x) ((x) + 0x14)
+#define ADC_V2_VER(x) ((x) + 0x20)
+
+/* Bit definitions for ADC_V1 */
+#define ADC_V1_CON_RES (1u << 16)
+#define ADC_V1_CON_PRSCEN (1u << 14)
+#define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6)
+#define ADC_V1_CON_STANDBY (1u << 2)
+
+/* Bit definitions for S3C2410 ADC */
+#define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3)
+#define ADC_S3C2410_DATX_MASK 0x3FF
+#define ADC_S3C2416_CON_RES_SEL (1u << 3)
+
+/* touch screen always uses channel 0 */
+#define ADC_S3C2410_MUX_TS 0
+
+/* ADCTSC Register Bits */
+#define ADC_S3C2443_TSC_UD_SEN (1u << 8)
+#define ADC_S3C2410_TSC_YM_SEN (1u << 7)
+#define ADC_S3C2410_TSC_YP_SEN (1u << 6)
+#define ADC_S3C2410_TSC_XM_SEN (1u << 5)
+#define ADC_S3C2410_TSC_XP_SEN (1u << 4)
+#define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3)
+#define ADC_S3C2410_TSC_AUTO_PST (1u << 2)
+#define ADC_S3C2410_TSC_XY_PST(x) (((x) & 0x3) << 0)
+
+#define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \
+ ADC_S3C2410_TSC_YP_SEN | \
+ ADC_S3C2410_TSC_XP_SEN | \
+ ADC_S3C2410_TSC_XY_PST(3))
+
+#define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \
+ ADC_S3C2410_TSC_YP_SEN | \
+ ADC_S3C2410_TSC_XP_SEN | \
+ ADC_S3C2410_TSC_AUTO_PST | \
+ ADC_S3C2410_TSC_XY_PST(0))
+
+/* Bit definitions for ADC_V2 */
+#define ADC_V2_CON1_SOFT_RESET (1u << 2)
+
+#define ADC_V2_CON2_OSEL (1u << 10)
+#define ADC_V2_CON2_ESEL (1u << 9)
+#define ADC_V2_CON2_HIGHF (1u << 8)
+#define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4)
+#define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0)
+#define ADC_V2_CON2_ACH_MASK 0xF
+
+#define MAX_ADC_V2_CHANNELS 10
+#define MAX_ADC_V1_CHANNELS 8
+#define MAX_EXYNOS3250_ADC_CHANNELS 2
+
+/* Bit definitions common for ADC_V1 and ADC_V2 */
+#define ADC_CON_EN_START (1u << 0)
+#define ADC_CON_EN_START_MASK (0x3 << 0)
+#define ADC_DATX_PRESSED (1u << 15)
+#define ADC_DATX_MASK 0xFFF
+#define ADC_DATY_MASK 0xFFF
+
+#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
+
+#define EXYNOS_ADCV1_PHY_OFFSET 0x0718
+#define EXYNOS_ADCV2_PHY_OFFSET 0x0720
+
+struct exynos_adc {
+ struct exynos_adc_data *data;
+ struct device *dev;
+ struct input_dev *input;
+ void __iomem *regs;
+ struct regmap *pmu_map;
+ struct clk *clk;
+ struct clk *sclk;
+ unsigned int irq;
+ unsigned int tsirq;
+ unsigned int delay;
+ struct regulator *vdd;
+
+ struct completion completion;
+
+ u32 value;
+ unsigned int version;
+
+ bool read_ts;
+ u32 ts_x;
+ u32 ts_y;
+};
+
+struct exynos_adc_data {
+ int num_channels;
+ bool needs_sclk;
+ bool needs_adc_phy;
+ int phy_offset;
+ u32 mask;
+
+ void (*init_hw)(struct exynos_adc *info);
+ void (*exit_hw)(struct exynos_adc *info);
+ void (*clear_irq)(struct exynos_adc *info);
+ void (*start_conv)(struct exynos_adc *info, unsigned long addr);
+};
+
+static void exynos_adc_unprepare_clk(struct exynos_adc *info)
+{
+ if (info->data->needs_sclk)
+ clk_unprepare(info->sclk);
+ clk_unprepare(info->clk);
+}
+
+static int exynos_adc_prepare_clk(struct exynos_adc *info)
+{
+ int ret;
+
+ ret = clk_prepare(info->clk);
+ if (ret) {
+ dev_err(info->dev, "failed preparing adc clock: %d\n", ret);
+ return ret;
+ }
+
+ if (info->data->needs_sclk) {
+ ret = clk_prepare(info->sclk);
+ if (ret) {
+ clk_unprepare(info->clk);
+ dev_err(info->dev,
+ "failed preparing sclk_adc clock: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void exynos_adc_disable_clk(struct exynos_adc *info)
+{
+ if (info->data->needs_sclk)
+ clk_disable(info->sclk);
+ clk_disable(info->clk);
+}
+
+static int exynos_adc_enable_clk(struct exynos_adc *info)
+{
+ int ret;
+
+ ret = clk_enable(info->clk);
+ if (ret) {
+ dev_err(info->dev, "failed enabling adc clock: %d\n", ret);
+ return ret;
+ }
+
+ if (info->data->needs_sclk) {
+ ret = clk_enable(info->sclk);
+ if (ret) {
+ clk_disable(info->clk);
+ dev_err(info->dev,
+ "failed enabling sclk_adc clock: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void exynos_adc_v1_init_hw(struct exynos_adc *info)
+{
+ u32 con1;
+
+ if (info->data->needs_adc_phy)
+ regmap_write(info->pmu_map, info->data->phy_offset, 1);
+
+ /* set default prescaler values and Enable prescaler */
+ con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
+
+ /* Enable 12-bit ADC resolution */
+ con1 |= ADC_V1_CON_RES;
+ writel(con1, ADC_V1_CON(info->regs));
+
+ /* set touchscreen delay */
+ writel(info->delay, ADC_V1_DLY(info->regs));
+}
+
+static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
+{
+ u32 con;
+
+ if (info->data->needs_adc_phy)
+ regmap_write(info->pmu_map, info->data->phy_offset, 0);
+
+ con = readl(ADC_V1_CON(info->regs));
+ con |= ADC_V1_CON_STANDBY;
+ writel(con, ADC_V1_CON(info->regs));
+}
+
+static void exynos_adc_v1_clear_irq(struct exynos_adc *info)
+{
+ writel(1, ADC_V1_INTCLR(info->regs));
+}
+
+static void exynos_adc_v1_start_conv(struct exynos_adc *info,
+ unsigned long addr)
+{
+ u32 con1;
+
+ writel(addr, ADC_V1_MUX(info->regs));
+
+ con1 = readl(ADC_V1_CON(info->regs));
+ writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static const struct exynos_adc_data exynos_adc_v1_data = {
+ .num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
+ .needs_adc_phy = true,
+ .phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
+
+ .init_hw = exynos_adc_v1_init_hw,
+ .exit_hw = exynos_adc_v1_exit_hw,
+ .clear_irq = exynos_adc_v1_clear_irq,
+ .start_conv = exynos_adc_v1_start_conv,
+};
+
+static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info,
+ unsigned long addr)
+{
+ u32 con1;
+
+ /* Enable 12 bit ADC resolution */
+ con1 = readl(ADC_V1_CON(info->regs));
+ con1 |= ADC_S3C2416_CON_RES_SEL;
+ writel(con1, ADC_V1_CON(info->regs));
+
+ /* Select channel for S3C2416 */
+ writel(addr, ADC_S3C2410_MUX(info->regs));
+
+ con1 = readl(ADC_V1_CON(info->regs));
+ writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static struct exynos_adc_data const exynos_adc_s3c2416_data = {
+ .num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
+
+ .init_hw = exynos_adc_v1_init_hw,
+ .exit_hw = exynos_adc_v1_exit_hw,
+ .start_conv = exynos_adc_s3c2416_start_conv,
+};
+
+static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info,
+ unsigned long addr)
+{
+ u32 con1;
+
+ /* Select channel for S3C2433 */
+ writel(addr, ADC_S3C2410_MUX(info->regs));
+
+ con1 = readl(ADC_V1_CON(info->regs));
+ writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static struct exynos_adc_data const exynos_adc_s3c2443_data = {
+ .num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
+
+ .init_hw = exynos_adc_v1_init_hw,
+ .exit_hw = exynos_adc_v1_exit_hw,
+ .start_conv = exynos_adc_s3c2443_start_conv,
+};
+
+static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
+ unsigned long addr)
+{
+ u32 con1;
+
+ con1 = readl(ADC_V1_CON(info->regs));
+ con1 &= ~ADC_S3C2410_CON_SELMUX(0x7);
+ con1 |= ADC_S3C2410_CON_SELMUX(addr);
+ writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static struct exynos_adc_data const exynos_adc_s3c24xx_data = {
+ .num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
+
+ .init_hw = exynos_adc_v1_init_hw,
+ .exit_hw = exynos_adc_v1_exit_hw,
+ .start_conv = exynos_adc_s3c64xx_start_conv,
+};
+
+static struct exynos_adc_data const exynos_adc_s3c64xx_data = {
+ .num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
+
+ .init_hw = exynos_adc_v1_init_hw,
+ .exit_hw = exynos_adc_v1_exit_hw,
+ .clear_irq = exynos_adc_v1_clear_irq,
+ .start_conv = exynos_adc_s3c64xx_start_conv,
+};
+
+static void exynos_adc_v2_init_hw(struct exynos_adc *info)
+{
+ u32 con1, con2;
+
+ if (info->data->needs_adc_phy)
+ regmap_write(info->pmu_map, info->data->phy_offset, 1);
+
+ con1 = ADC_V2_CON1_SOFT_RESET;
+ writel(con1, ADC_V2_CON1(info->regs));
+
+ con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
+ ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
+ writel(con2, ADC_V2_CON2(info->regs));
+
+ /* Enable interrupts */
+ writel(1, ADC_V2_INT_EN(info->regs));
+}
+
+static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
+{
+ u32 con;
+
+ if (info->data->needs_adc_phy)
+ regmap_write(info->pmu_map, info->data->phy_offset, 0);
+
+ con = readl(ADC_V2_CON1(info->regs));
+ con &= ~ADC_CON_EN_START;
+ writel(con, ADC_V2_CON1(info->regs));
+}
+
+static void exynos_adc_v2_clear_irq(struct exynos_adc *info)
+{
+ writel(1, ADC_V2_INT_ST(info->regs));
+}
+
+static void exynos_adc_v2_start_conv(struct exynos_adc *info,
+ unsigned long addr)
+{
+ u32 con1, con2;
+
+ con2 = readl(ADC_V2_CON2(info->regs));
+ con2 &= ~ADC_V2_CON2_ACH_MASK;
+ con2 |= ADC_V2_CON2_ACH_SEL(addr);
+ writel(con2, ADC_V2_CON2(info->regs));
+
+ con1 = readl(ADC_V2_CON1(info->regs));
+ writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs));
+}
+
+static const struct exynos_adc_data exynos_adc_v2_data = {
+ .num_channels = MAX_ADC_V2_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
+ .needs_adc_phy = true,
+ .phy_offset = EXYNOS_ADCV2_PHY_OFFSET,
+
+ .init_hw = exynos_adc_v2_init_hw,
+ .exit_hw = exynos_adc_v2_exit_hw,
+ .clear_irq = exynos_adc_v2_clear_irq,
+ .start_conv = exynos_adc_v2_start_conv,
+};
+
+static const struct exynos_adc_data exynos3250_adc_data = {
+ .num_channels = MAX_EXYNOS3250_ADC_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
+ .needs_sclk = true,
+ .needs_adc_phy = true,
+ .phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
+
+ .init_hw = exynos_adc_v2_init_hw,
+ .exit_hw = exynos_adc_v2_exit_hw,
+ .clear_irq = exynos_adc_v2_clear_irq,
+ .start_conv = exynos_adc_v2_start_conv,
+};
+
+static void exynos_adc_exynos7_init_hw(struct exynos_adc *info)
+{
+ u32 con1, con2;
+
+ if (info->data->needs_adc_phy)
+ regmap_write(info->pmu_map, info->data->phy_offset, 1);
+
+ con1 = ADC_V2_CON1_SOFT_RESET;
+ writel(con1, ADC_V2_CON1(info->regs));
+
+ con2 = readl(ADC_V2_CON2(info->regs));
+ con2 &= ~ADC_V2_CON2_C_TIME(7);
+ con2 |= ADC_V2_CON2_C_TIME(0);
+ writel(con2, ADC_V2_CON2(info->regs));
+
+ /* Enable interrupts */
+ writel(1, ADC_V2_INT_EN(info->regs));
+}
+
+static const struct exynos_adc_data exynos7_adc_data = {
+ .num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
+
+ .init_hw = exynos_adc_exynos7_init_hw,
+ .exit_hw = exynos_adc_v2_exit_hw,
+ .clear_irq = exynos_adc_v2_clear_irq,
+ .start_conv = exynos_adc_v2_start_conv,
+};
+
+static const struct of_device_id exynos_adc_match[] = {
+ {
+ .compatible = "samsung,s3c2410-adc",
+ .data = &exynos_adc_s3c24xx_data,
+ }, {
+ .compatible = "samsung,s3c2416-adc",
+ .data = &exynos_adc_s3c2416_data,
+ }, {
+ .compatible = "samsung,s3c2440-adc",
+ .data = &exynos_adc_s3c24xx_data,
+ }, {
+ .compatible = "samsung,s3c2443-adc",
+ .data = &exynos_adc_s3c2443_data,
+ }, {
+ .compatible = "samsung,s3c6410-adc",
+ .data = &exynos_adc_s3c64xx_data,
+ }, {
+ .compatible = "samsung,exynos-adc-v1",
+ .data = &exynos_adc_v1_data,
+ }, {
+ .compatible = "samsung,exynos-adc-v2",
+ .data = &exynos_adc_v2_data,
+ }, {
+ .compatible = "samsung,exynos3250-adc",
+ .data = &exynos3250_adc_data,
+ }, {
+ .compatible = "samsung,exynos7-adc",
+ .data = &exynos7_adc_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, exynos_adc_match);
+
+static struct exynos_adc_data *exynos_adc_get_data(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+
+ match = of_match_node(exynos_adc_match, pdev->dev.of_node);
+ return (struct exynos_adc_data *)match->data;
+}
+
+static int exynos_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ struct exynos_adc *info = iio_priv(indio_dev);
+ unsigned long timeout;
+ int ret;
+
+ if (mask != IIO_CHAN_INFO_RAW)
+ return -EINVAL;
+
+ mutex_lock(&indio_dev->mlock);
+ reinit_completion(&info->completion);
+
+ /* Select the channel to be used and Trigger conversion */
+ if (info->data->start_conv)
+ info->data->start_conv(info, chan->address);
+
+ timeout = wait_for_completion_timeout(&info->completion,
+ EXYNOS_ADC_TIMEOUT);
+ if (timeout == 0) {
+ dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
+ if (info->data->init_hw)
+ info->data->init_hw(info);
+ ret = -ETIMEDOUT;
+ } else {
+ *val = info->value;
+ *val2 = 0;
+ ret = IIO_VAL_INT;
+ }
+
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y)
+{
+ struct exynos_adc *info = iio_priv(indio_dev);
+ unsigned long timeout;
+ int ret;
+
+ mutex_lock(&indio_dev->mlock);
+ info->read_ts = true;
+
+ reinit_completion(&info->completion);
+
+ writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST,
+ ADC_V1_TSC(info->regs));
+
+ /* Select the ts channel to be used and Trigger conversion */
+ info->data->start_conv(info, ADC_S3C2410_MUX_TS);
+
+ timeout = wait_for_completion_timeout(&info->completion,
+ EXYNOS_ADC_TIMEOUT);
+ if (timeout == 0) {
+ dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
+ if (info->data->init_hw)
+ info->data->init_hw(info);
+ ret = -ETIMEDOUT;
+ } else {
+ *x = info->ts_x;
+ *y = info->ts_y;
+ ret = 0;
+ }
+
+ info->read_ts = false;
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
+{
+ struct exynos_adc *info = dev_id;
+ u32 mask = info->data->mask;
+
+ /* Read value */
+ if (info->read_ts) {
+ info->ts_x = readl(ADC_V1_DATX(info->regs));
+ info->ts_y = readl(ADC_V1_DATY(info->regs));
+ writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs));
+ } else {
+ info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+ }
+
+ /* clear irq */
+ if (info->data->clear_irq)
+ info->data->clear_irq(info);
+
+ complete(&info->completion);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Here we (ab)use a threaded interrupt handler to stay running
+ * for as long as the touchscreen remains pressed, we report
+ * a new event with the latest data and then sleep until the
+ * next timer tick. This mirrors the behavior of the old
+ * driver, with much less code.
+ */
+static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
+{
+ struct exynos_adc *info = dev_id;
+ struct iio_dev *dev = dev_get_drvdata(info->dev);
+ u32 x, y;
+ bool pressed;
+ int ret;
+
+ while (info->input->users) {
+ ret = exynos_read_s3c64xx_ts(dev, &x, &y);
+ if (ret == -ETIMEDOUT)
+ break;
+
+ pressed = x & y & ADC_DATX_PRESSED;
+ if (!pressed) {
+ input_report_key(info->input, BTN_TOUCH, 0);
+ input_sync(info->input);
+ break;
+ }
+
+ input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK);
+ input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK);
+ input_report_key(info->input, BTN_TOUCH, 1);
+ input_sync(info->input);
+
+ usleep_range(1000, 1100);
+ };
+
+ writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
+
+ return IRQ_HANDLED;
+}
+
+static int exynos_adc_reg_access(struct iio_dev *indio_dev,
+ unsigned reg, unsigned writeval,
+ unsigned *readval)
+{
+ struct exynos_adc *info = iio_priv(indio_dev);
+
+ if (readval == NULL)
+ return -EINVAL;
+
+ *readval = readl(info->regs + reg);
+
+ return 0;
+}
+
+static const struct iio_info exynos_adc_iio_info = {
+ .read_raw = &exynos_read_raw,
+ .debugfs_reg_access = &exynos_adc_reg_access,
+};
+
+#define ADC_CHANNEL(_index, _id) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = _index, \
+ .address = _index, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .datasheet_name = _id, \
+}
+
+static const struct iio_chan_spec exynos_adc_iio_channels[] = {
+ ADC_CHANNEL(0, "adc0"),
+ ADC_CHANNEL(1, "adc1"),
+ ADC_CHANNEL(2, "adc2"),
+ ADC_CHANNEL(3, "adc3"),
+ ADC_CHANNEL(4, "adc4"),
+ ADC_CHANNEL(5, "adc5"),
+ ADC_CHANNEL(6, "adc6"),
+ ADC_CHANNEL(7, "adc7"),
+ ADC_CHANNEL(8, "adc8"),
+ ADC_CHANNEL(9, "adc9"),
+};
+
+static int exynos_adc_remove_devices(struct device *dev, void *c)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ platform_device_unregister(pdev);
+
+ return 0;
+}
+
+static int exynos_adc_ts_open(struct input_dev *dev)
+{
+ struct exynos_adc *info = input_get_drvdata(dev);
+
+ enable_irq(info->tsirq);
+
+ return 0;
+}
+
+static void exynos_adc_ts_close(struct input_dev *dev)
+{
+ struct exynos_adc *info = input_get_drvdata(dev);
+
+ disable_irq(info->tsirq);
+}
+
+static int exynos_adc_ts_init(struct exynos_adc *info)
+{
+ int ret;
+
+ if (info->tsirq <= 0)
+ return -ENODEV;
+
+ info->input = input_allocate_device();
+ if (!info->input)
+ return -ENOMEM;
+
+ info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0);
+ input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0);
+
+ info->input->name = "S3C24xx TouchScreen";
+ info->input->id.bustype = BUS_HOST;
+ info->input->open = exynos_adc_ts_open;
+ info->input->close = exynos_adc_ts_close;
+
+ input_set_drvdata(info->input, info);
+
+ ret = input_register_device(info->input);
+ if (ret) {
+ input_free_device(info->input);
+ return ret;
+ }
+
+ disable_irq(info->tsirq);
+ ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr,
+ IRQF_ONESHOT, "touchscreen", info);
+ if (ret)
+ input_unregister_device(info->input);
+
+ return ret;
+}
+
+static int exynos_adc_probe(struct platform_device *pdev)
+{
+ struct exynos_adc *info = NULL;
+ struct device_node *np = pdev->dev.of_node;
+ struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
+ struct iio_dev *indio_dev = NULL;
+ struct resource *mem;
+ bool has_ts = false;
+ int ret = -ENODEV;
+ int irq;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc));
+ if (!indio_dev) {
+ dev_err(&pdev->dev, "failed allocating iio device\n");
+ return -ENOMEM;
+ }
+
+ info = iio_priv(indio_dev);
+
+ info->data = exynos_adc_get_data(pdev);
+ if (!info->data) {
+ dev_err(&pdev->dev, "failed getting exynos_adc_data\n");
+ return -EINVAL;
+ }
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ info->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(info->regs))
+ return PTR_ERR(info->regs);
+
+
+ if (info->data->needs_adc_phy) {
+ info->pmu_map = syscon_regmap_lookup_by_phandle(
+ pdev->dev.of_node,
+ "samsung,syscon-phandle");
+ if (IS_ERR(info->pmu_map)) {
+ dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
+ return PTR_ERR(info->pmu_map);
+ }
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return irq;
+ }
+ info->irq = irq;
+
+ irq = platform_get_irq(pdev, 1);
+ if (irq == -EPROBE_DEFER)
+ return irq;
+
+ info->tsirq = irq;
+
+ info->dev = &pdev->dev;
+
+ init_completion(&info->completion);
+
+ info->clk = devm_clk_get(&pdev->dev, "adc");
+ if (IS_ERR(info->clk)) {
+ dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
+ PTR_ERR(info->clk));
+ return PTR_ERR(info->clk);
+ }
+
+ if (info->data->needs_sclk) {
+ info->sclk = devm_clk_get(&pdev->dev, "sclk");
+ if (IS_ERR(info->sclk)) {
+ dev_err(&pdev->dev,
+ "failed getting sclk clock, err = %ld\n",
+ PTR_ERR(info->sclk));
+ return PTR_ERR(info->sclk);
+ }
+ }
+
+ info->vdd = devm_regulator_get(&pdev->dev, "vdd");
+ if (IS_ERR(info->vdd)) {
+ dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
+ PTR_ERR(info->vdd));
+ return PTR_ERR(info->vdd);
+ }
+
+ ret = regulator_enable(info->vdd);
+ if (ret)
+ return ret;
+
+ ret = exynos_adc_prepare_clk(info);
+ if (ret)
+ goto err_disable_reg;
+
+ ret = exynos_adc_enable_clk(info);
+ if (ret)
+ goto err_unprepare_clk;
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->dev.of_node = pdev->dev.of_node;
+ indio_dev->info = &exynos_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = exynos_adc_iio_channels;
+ indio_dev->num_channels = info->data->num_channels;
+
+ ret = request_irq(info->irq, exynos_adc_isr,
+ 0, dev_name(&pdev->dev), info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
+ info->irq);
+ goto err_disable_clk;
+ }
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto err_irq;
+
+ if (info->data->init_hw)
+ info->data->init_hw(info);
+
+ /* leave out any TS related code if unreachable */
+ if (IS_REACHABLE(CONFIG_INPUT)) {
+ has_ts = of_property_read_bool(pdev->dev.of_node,
+ "has-touchscreen") || pdata;
+ }
+
+ if (pdata)
+ info->delay = pdata->delay;
+ else
+ info->delay = 10000;
+
+ if (has_ts)
+ ret = exynos_adc_ts_init(info);
+ if (ret)
+ goto err_iio;
+
+ ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed adding child nodes\n");
+ goto err_of_populate;
+ }
+
+ return 0;
+
+err_of_populate:
+ device_for_each_child(&indio_dev->dev, NULL,
+ exynos_adc_remove_devices);
+ if (has_ts) {
+ input_unregister_device(info->input);
+ free_irq(info->tsirq, info);
+ }
+err_iio:
+ iio_device_unregister(indio_dev);
+err_irq:
+ free_irq(info->irq, info);
+err_disable_clk:
+ if (info->data->exit_hw)
+ info->data->exit_hw(info);
+ exynos_adc_disable_clk(info);
+err_unprepare_clk:
+ exynos_adc_unprepare_clk(info);
+err_disable_reg:
+ regulator_disable(info->vdd);
+ return ret;
+}
+
+static int exynos_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct exynos_adc *info = iio_priv(indio_dev);
+
+ if (IS_REACHABLE(CONFIG_INPUT)) {
+ free_irq(info->tsirq, info);
+ input_unregister_device(info->input);
+ }
+ device_for_each_child(&indio_dev->dev, NULL,
+ exynos_adc_remove_devices);
+ iio_device_unregister(indio_dev);
+ free_irq(info->irq, info);
+ if (info->data->exit_hw)
+ info->data->exit_hw(info);
+ exynos_adc_disable_clk(info);
+ exynos_adc_unprepare_clk(info);
+ regulator_disable(info->vdd);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_adc_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct exynos_adc *info = iio_priv(indio_dev);
+
+ if (info->data->exit_hw)
+ info->data->exit_hw(info);
+ exynos_adc_disable_clk(info);
+ regulator_disable(info->vdd);
+
+ return 0;
+}
+
+static int exynos_adc_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct exynos_adc *info = iio_priv(indio_dev);
+ int ret;
+
+ ret = regulator_enable(info->vdd);
+ if (ret)
+ return ret;
+
+ ret = exynos_adc_enable_clk(info);
+ if (ret)
+ return ret;
+
+ if (info->data->init_hw)
+ info->data->init_hw(info);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops,
+ exynos_adc_suspend,
+ exynos_adc_resume);
+
+static struct platform_driver exynos_adc_driver = {
+ .probe = exynos_adc_probe,
+ .remove = exynos_adc_remove,
+ .driver = {
+ .name = "exynos-adc",
+ .of_match_table = exynos_adc_match,
+ .pm = &exynos_adc_pm_ops,
+ },
+};
+
+module_platform_driver(exynos_adc_driver);
+
+MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>");
+MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver");
+MODULE_LICENSE("GPL v2");