v4.19.13 snapshot.
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
new file mode 100644
index 0000000..11caafa
--- /dev/null
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -0,0 +1,991 @@
+/*
+ * TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ *
+ * Updated by Vinod & Sudhakar Feb 2005
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/pm_runtime.h>
+
+/* ----- global defines ----------------------------------------------- */
+
+#define DAVINCI_I2C_TIMEOUT (1*HZ)
+#define DAVINCI_I2C_MAX_TRIES 2
+#define DAVINCI_I2C_OWN_ADDRESS 0x08
+#define I2C_DAVINCI_INTR_ALL (DAVINCI_I2C_IMR_SCD | \
+ DAVINCI_I2C_IMR_ARDY | \
+ DAVINCI_I2C_IMR_NACK | \
+ DAVINCI_I2C_IMR_AL)
+
+#define DAVINCI_I2C_OAR_REG 0x00
+#define DAVINCI_I2C_IMR_REG 0x04
+#define DAVINCI_I2C_STR_REG 0x08
+#define DAVINCI_I2C_CLKL_REG 0x0c
+#define DAVINCI_I2C_CLKH_REG 0x10
+#define DAVINCI_I2C_CNT_REG 0x14
+#define DAVINCI_I2C_DRR_REG 0x18
+#define DAVINCI_I2C_SAR_REG 0x1c
+#define DAVINCI_I2C_DXR_REG 0x20
+#define DAVINCI_I2C_MDR_REG 0x24
+#define DAVINCI_I2C_IVR_REG 0x28
+#define DAVINCI_I2C_EMDR_REG 0x2c
+#define DAVINCI_I2C_PSC_REG 0x30
+#define DAVINCI_I2C_FUNC_REG 0x48
+#define DAVINCI_I2C_DIR_REG 0x4c
+#define DAVINCI_I2C_DIN_REG 0x50
+#define DAVINCI_I2C_DOUT_REG 0x54
+#define DAVINCI_I2C_DSET_REG 0x58
+#define DAVINCI_I2C_DCLR_REG 0x5c
+
+#define DAVINCI_I2C_IVR_AAS 0x07
+#define DAVINCI_I2C_IVR_SCD 0x06
+#define DAVINCI_I2C_IVR_XRDY 0x05
+#define DAVINCI_I2C_IVR_RDR 0x04
+#define DAVINCI_I2C_IVR_ARDY 0x03
+#define DAVINCI_I2C_IVR_NACK 0x02
+#define DAVINCI_I2C_IVR_AL 0x01
+
+#define DAVINCI_I2C_STR_BB BIT(12)
+#define DAVINCI_I2C_STR_RSFULL BIT(11)
+#define DAVINCI_I2C_STR_SCD BIT(5)
+#define DAVINCI_I2C_STR_ARDY BIT(2)
+#define DAVINCI_I2C_STR_NACK BIT(1)
+#define DAVINCI_I2C_STR_AL BIT(0)
+
+#define DAVINCI_I2C_MDR_NACK BIT(15)
+#define DAVINCI_I2C_MDR_STT BIT(13)
+#define DAVINCI_I2C_MDR_STP BIT(11)
+#define DAVINCI_I2C_MDR_MST BIT(10)
+#define DAVINCI_I2C_MDR_TRX BIT(9)
+#define DAVINCI_I2C_MDR_XA BIT(8)
+#define DAVINCI_I2C_MDR_RM BIT(7)
+#define DAVINCI_I2C_MDR_IRS BIT(5)
+
+#define DAVINCI_I2C_IMR_AAS BIT(6)
+#define DAVINCI_I2C_IMR_SCD BIT(5)
+#define DAVINCI_I2C_IMR_XRDY BIT(4)
+#define DAVINCI_I2C_IMR_RRDY BIT(3)
+#define DAVINCI_I2C_IMR_ARDY BIT(2)
+#define DAVINCI_I2C_IMR_NACK BIT(1)
+#define DAVINCI_I2C_IMR_AL BIT(0)
+
+/* set SDA and SCL as GPIO */
+#define DAVINCI_I2C_FUNC_PFUNC0 BIT(0)
+
+/* set SCL as output when used as GPIO*/
+#define DAVINCI_I2C_DIR_PDIR0 BIT(0)
+/* set SDA as output when used as GPIO*/
+#define DAVINCI_I2C_DIR_PDIR1 BIT(1)
+
+/* read SCL GPIO level */
+#define DAVINCI_I2C_DIN_PDIN0 BIT(0)
+/* read SDA GPIO level */
+#define DAVINCI_I2C_DIN_PDIN1 BIT(1)
+
+/*set the SCL GPIO high */
+#define DAVINCI_I2C_DSET_PDSET0 BIT(0)
+/*set the SDA GPIO high */
+#define DAVINCI_I2C_DSET_PDSET1 BIT(1)
+
+/* set the SCL GPIO low */
+#define DAVINCI_I2C_DCLR_PDCLR0 BIT(0)
+/* set the SDA GPIO low */
+#define DAVINCI_I2C_DCLR_PDCLR1 BIT(1)
+
+/* timeout for pm runtime autosuspend */
+#define DAVINCI_I2C_PM_TIMEOUT 1000 /* ms */
+
+struct davinci_i2c_dev {
+ struct device *dev;
+ void __iomem *base;
+ struct completion cmd_complete;
+ struct clk *clk;
+ int cmd_err;
+ u8 *buf;
+ size_t buf_len;
+ int irq;
+ int stop;
+ u8 terminate;
+ struct i2c_adapter adapter;
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
+ struct davinci_i2c_platform_data *pdata;
+};
+
+/* default platform data to use if not supplied in the platform_device */
+static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = {
+ .bus_freq = 100,
+ .bus_delay = 0,
+};
+
+static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev,
+ int reg, u16 val)
+{
+ writew_relaxed(val, i2c_dev->base + reg);
+}
+
+static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
+{
+ return readw_relaxed(i2c_dev->base + reg);
+}
+
+static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev,
+ int val)
+{
+ u16 w;
+
+ w = davinci_i2c_read_reg(i2c_dev, DAVINCI_I2C_MDR_REG);
+ if (!val) /* put I2C into reset */
+ w &= ~DAVINCI_I2C_MDR_IRS;
+ else /* take I2C out of reset */
+ w |= DAVINCI_I2C_MDR_IRS;
+
+ davinci_i2c_write_reg(i2c_dev, DAVINCI_I2C_MDR_REG, w);
+}
+
+static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
+{
+ struct davinci_i2c_platform_data *pdata = dev->pdata;
+ u16 psc;
+ u32 clk;
+ u32 d;
+ u32 clkh;
+ u32 clkl;
+ u32 input_clock = clk_get_rate(dev->clk);
+ struct device_node *of_node = dev->dev->of_node;
+
+ /* NOTE: I2C Clock divider programming info
+ * As per I2C specs the following formulas provide prescaler
+ * and low/high divider values
+ * input clk --> PSC Div -----------> ICCL/H Div --> output clock
+ * module clk
+ *
+ * output clk = module clk / (PSC + 1) [ (ICCL + d) + (ICCH + d) ]
+ *
+ * Thus,
+ * (ICCL + ICCH) = clk = (input clk / ((psc +1) * output clk)) - 2d;
+ *
+ * where if PSC == 0, d = 7,
+ * if PSC == 1, d = 6
+ * if PSC > 1 , d = 5
+ *
+ * Note:
+ * d is always 6 on Keystone I2C controller
+ */
+
+ /*
+ * Both Davinci and current Keystone User Guides recommend a value
+ * between 7MHz and 12MHz. In reality 7MHz module clock doesn't
+ * always produce enough margin between SDA and SCL transitions.
+ * Measurements show that the higher the module clock is, the
+ * bigger is the margin, providing more reliable communication.
+ * So we better target for 12MHz.
+ */
+ psc = (input_clock / 12000000) - 1;
+ if ((input_clock / (psc + 1)) > 12000000)
+ psc++; /* better to run under spec than over */
+ d = (psc >= 2) ? 5 : 7 - psc;
+
+ if (of_node && of_device_is_compatible(of_node, "ti,keystone-i2c"))
+ d = 6;
+
+ clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000));
+ /* Avoid driving the bus too fast because of rounding errors above */
+ if (input_clock / (psc + 1) / clk > pdata->bus_freq * 1000)
+ clk++;
+ /*
+ * According to I2C-BUS Spec 2.1, in FAST-MODE LOW period should be at
+ * least 1.3uS, which is not the case with 50% duty cycle. Driving HIGH
+ * to LOW ratio as 1 to 2 is more safe.
+ */
+ if (pdata->bus_freq > 100)
+ clkl = (clk << 1) / 3;
+ else
+ clkl = (clk >> 1);
+ /*
+ * It's not always possible to have 1 to 2 ratio when d=7, so fall back
+ * to minimal possible clkh in this case.
+ *
+ * Note:
+ * CLKH is not allowed to be 0, in this case I2C clock is not generated
+ * at all
+ */
+ if (clk > clkl + d) {
+ clkh = clk - clkl - d;
+ clkl -= d;
+ } else {
+ clkh = 1;
+ clkl = clk - (d << 1);
+ }
+
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_PSC_REG, psc);
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
+
+ dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
+}
+
+/*
+ * This function configures I2C and brings I2C out of reset.
+ * This function is called during I2C init function. This function
+ * also gets called if I2C encounters any errors.
+ */
+static int i2c_davinci_init(struct davinci_i2c_dev *dev)
+{
+ struct davinci_i2c_platform_data *pdata = dev->pdata;
+
+ /* put I2C into reset */
+ davinci_i2c_reset_ctrl(dev, 0);
+
+ /* compute clock dividers */
+ i2c_davinci_calc_clk_dividers(dev);
+
+ /* Respond at reserved "SMBus Host" slave address" (and zero);
+ * we seem to have no option to not respond...
+ */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, DAVINCI_I2C_OWN_ADDRESS);
+
+ dev_dbg(dev->dev, "PSC = %d\n",
+ davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
+ dev_dbg(dev->dev, "CLKL = %d\n",
+ davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG));
+ dev_dbg(dev->dev, "CLKH = %d\n",
+ davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG));
+ dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n",
+ pdata->bus_freq, pdata->bus_delay);
+
+
+ /* Take the I2C module out of reset: */
+ davinci_i2c_reset_ctrl(dev, 1);
+
+ /* Enable interrupts */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, I2C_DAVINCI_INTR_ALL);
+
+ return 0;
+}
+
+/*
+ * This routine does i2c bus recovery by using i2c_generic_scl_recovery
+ * which is provided by I2C Bus recovery infrastructure.
+ */
+static void davinci_i2c_prepare_recovery(struct i2c_adapter *adap)
+{
+ struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+ /* Disable interrupts */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, 0);
+
+ /* put I2C into reset */
+ davinci_i2c_reset_ctrl(dev, 0);
+}
+
+static void davinci_i2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+ struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+ i2c_davinci_init(dev);
+}
+
+static struct i2c_bus_recovery_info davinci_i2c_gpio_recovery_info = {
+ .recover_bus = i2c_generic_scl_recovery,
+ .prepare_recovery = davinci_i2c_prepare_recovery,
+ .unprepare_recovery = davinci_i2c_unprepare_recovery,
+};
+
+static void davinci_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+ struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+ if (val)
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_DSET_REG,
+ DAVINCI_I2C_DSET_PDSET0);
+ else
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_DCLR_REG,
+ DAVINCI_I2C_DCLR_PDCLR0);
+}
+
+static int davinci_i2c_get_scl(struct i2c_adapter *adap)
+{
+ struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+ int val;
+
+ /* read the state of SCL */
+ val = davinci_i2c_read_reg(dev, DAVINCI_I2C_DIN_REG);
+ return val & DAVINCI_I2C_DIN_PDIN0;
+}
+
+static int davinci_i2c_get_sda(struct i2c_adapter *adap)
+{
+ struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+ int val;
+
+ /* read the state of SDA */
+ val = davinci_i2c_read_reg(dev, DAVINCI_I2C_DIN_REG);
+ return val & DAVINCI_I2C_DIN_PDIN1;
+}
+
+static void davinci_i2c_scl_prepare_recovery(struct i2c_adapter *adap)
+{
+ struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+ davinci_i2c_prepare_recovery(adap);
+
+ /* SCL output, SDA input */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_DIR_REG, DAVINCI_I2C_DIR_PDIR0);
+
+ /* change to GPIO mode */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_FUNC_REG,
+ DAVINCI_I2C_FUNC_PFUNC0);
+}
+
+static void davinci_i2c_scl_unprepare_recovery(struct i2c_adapter *adap)
+{
+ struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+
+ /* change back to I2C mode */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_FUNC_REG, 0);
+
+ davinci_i2c_unprepare_recovery(adap);
+}
+
+static struct i2c_bus_recovery_info davinci_i2c_scl_recovery_info = {
+ .recover_bus = i2c_generic_scl_recovery,
+ .set_scl = davinci_i2c_set_scl,
+ .get_scl = davinci_i2c_get_scl,
+ .get_sda = davinci_i2c_get_sda,
+ .prepare_recovery = davinci_i2c_scl_prepare_recovery,
+ .unprepare_recovery = davinci_i2c_scl_unprepare_recovery,
+};
+
+/*
+ * Waiting for bus not busy
+ */
+static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev)
+{
+ unsigned long timeout = jiffies + dev->adapter.timeout;
+
+ do {
+ if (!(davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) & DAVINCI_I2C_STR_BB))
+ return 0;
+ schedule_timeout_uninterruptible(1);
+ } while (time_before_eq(jiffies, timeout));
+
+ dev_warn(dev->dev, "timeout waiting for bus ready\n");
+ i2c_recover_bus(&dev->adapter);
+
+ /*
+ * if bus is still "busy" here, it's most probably a HW problem like
+ * short-circuit
+ */
+ if (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) & DAVINCI_I2C_STR_BB)
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Low level master read/write transaction. This function is called
+ * from i2c_davinci_xfer.
+ */
+static int
+i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
+{
+ struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+ struct davinci_i2c_platform_data *pdata = dev->pdata;
+ u32 flag;
+ u16 w;
+ unsigned long time_left;
+
+ if (msg->addr == DAVINCI_I2C_OWN_ADDRESS) {
+ dev_warn(dev->dev, "transfer to own address aborted\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ /* Introduce a delay, required for some boards (e.g Davinci EVM) */
+ if (pdata->bus_delay)
+ udelay(pdata->bus_delay);
+
+ /* set the slave address */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_SAR_REG, msg->addr);
+
+ dev->buf = msg->buf;
+ dev->buf_len = msg->len;
+ dev->stop = stop;
+
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
+
+ reinit_completion(&dev->cmd_complete);
+ dev->cmd_err = 0;
+
+ /* Take I2C out of reset and configure it as master */
+ flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST;
+
+ /* if the slave address is ten bit address, enable XA bit */
+ if (msg->flags & I2C_M_TEN)
+ flag |= DAVINCI_I2C_MDR_XA;
+ if (!(msg->flags & I2C_M_RD))
+ flag |= DAVINCI_I2C_MDR_TRX;
+ if (msg->len == 0)
+ flag |= DAVINCI_I2C_MDR_RM;
+
+ /* Enable receive or transmit interrupts */
+ w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
+ if (msg->flags & I2C_M_RD)
+ w |= DAVINCI_I2C_IMR_RRDY;
+ else
+ w |= DAVINCI_I2C_IMR_XRDY;
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
+
+ dev->terminate = 0;
+
+ /*
+ * Write mode register first as needed for correct behaviour
+ * on OMAP-L138, but don't set STT yet to avoid a race with XRDY
+ * occurring before we have loaded DXR
+ */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+
+ /*
+ * First byte should be set here, not after interrupt,
+ * because transmit-data-ready interrupt can come before
+ * NACK-interrupt during sending of previous message and
+ * ICDXR may have wrong data
+ * It also saves us one interrupt, slightly faster
+ */
+ if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) {
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++);
+ dev->buf_len--;
+ }
+
+ /* Set STT to begin transmit now DXR is loaded */
+ flag |= DAVINCI_I2C_MDR_STT;
+ if (stop && msg->len != 0)
+ flag |= DAVINCI_I2C_MDR_STP;
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+
+ time_left = wait_for_completion_timeout(&dev->cmd_complete,
+ dev->adapter.timeout);
+ if (!time_left) {
+ dev_err(dev->dev, "controller timed out\n");
+ i2c_recover_bus(adap);
+ dev->buf_len = 0;
+ return -ETIMEDOUT;
+ }
+ if (dev->buf_len) {
+ /* This should be 0 if all bytes were transferred
+ * or dev->cmd_err denotes an error.
+ */
+ dev_err(dev->dev, "abnormal termination buf_len=%zu\n",
+ dev->buf_len);
+ dev->terminate = 1;
+ wmb();
+ dev->buf_len = 0;
+ return -EREMOTEIO;
+ }
+
+ /* no error */
+ if (likely(!dev->cmd_err))
+ return msg->len;
+
+ /* We have an error */
+ if (dev->cmd_err & DAVINCI_I2C_STR_AL) {
+ i2c_davinci_init(dev);
+ return -EIO;
+ }
+
+ if (dev->cmd_err & DAVINCI_I2C_STR_NACK) {
+ if (msg->flags & I2C_M_IGNORE_NAK)
+ return msg->len;
+ w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+ w |= DAVINCI_I2C_MDR_STP;
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+ return -EREMOTEIO;
+ }
+ return -EIO;
+}
+
+/*
+ * Prepare controller for a transaction and call i2c_davinci_xfer_msg
+ */
+static int
+i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+ struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
+ int i;
+ int ret;
+
+ dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
+
+ ret = pm_runtime_get_sync(dev->dev);
+ if (ret < 0) {
+ dev_err(dev->dev, "Failed to runtime_get device: %d\n", ret);
+ pm_runtime_put_noidle(dev->dev);
+ return ret;
+ }
+
+ ret = i2c_davinci_wait_bus_not_busy(dev);
+ if (ret < 0) {
+ dev_warn(dev->dev, "timeout waiting for bus ready\n");
+ goto out;
+ }
+
+ for (i = 0; i < num; i++) {
+ ret = i2c_davinci_xfer_msg(adap, &msgs[i], (i == (num - 1)));
+ dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num,
+ ret);
+ if (ret < 0)
+ goto out;
+ }
+
+ ret = num;
+
+out:
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+
+ return ret;
+}
+
+static u32 i2c_davinci_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static void terminate_read(struct davinci_i2c_dev *dev)
+{
+ u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+ w |= DAVINCI_I2C_MDR_NACK;
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+
+ /* Throw away data */
+ davinci_i2c_read_reg(dev, DAVINCI_I2C_DRR_REG);
+ if (!dev->terminate)
+ dev_err(dev->dev, "RDR IRQ while no data requested\n");
+}
+static void terminate_write(struct davinci_i2c_dev *dev)
+{
+ u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+ w |= DAVINCI_I2C_MDR_RM | DAVINCI_I2C_MDR_STP;
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+
+ if (!dev->terminate)
+ dev_dbg(dev->dev, "TDR IRQ while no data to send\n");
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C interrupt
+ * occurs.
+ */
+static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
+{
+ struct davinci_i2c_dev *dev = dev_id;
+ u32 stat;
+ int count = 0;
+ u16 w;
+
+ if (pm_runtime_suspended(dev->dev))
+ return IRQ_NONE;
+
+ while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) {
+ dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
+ if (count++ == 100) {
+ dev_warn(dev->dev, "Too much work in one IRQ\n");
+ break;
+ }
+
+ switch (stat) {
+ case DAVINCI_I2C_IVR_AL:
+ /* Arbitration lost, must retry */
+ dev->cmd_err |= DAVINCI_I2C_STR_AL;
+ dev->buf_len = 0;
+ complete(&dev->cmd_complete);
+ break;
+
+ case DAVINCI_I2C_IVR_NACK:
+ dev->cmd_err |= DAVINCI_I2C_STR_NACK;
+ dev->buf_len = 0;
+ complete(&dev->cmd_complete);
+ break;
+
+ case DAVINCI_I2C_IVR_ARDY:
+ davinci_i2c_write_reg(dev,
+ DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY);
+ if (((dev->buf_len == 0) && (dev->stop != 0)) ||
+ (dev->cmd_err & DAVINCI_I2C_STR_NACK)) {
+ w = davinci_i2c_read_reg(dev,
+ DAVINCI_I2C_MDR_REG);
+ w |= DAVINCI_I2C_MDR_STP;
+ davinci_i2c_write_reg(dev,
+ DAVINCI_I2C_MDR_REG, w);
+ }
+ complete(&dev->cmd_complete);
+ break;
+
+ case DAVINCI_I2C_IVR_RDR:
+ if (dev->buf_len) {
+ *dev->buf++ =
+ davinci_i2c_read_reg(dev,
+ DAVINCI_I2C_DRR_REG);
+ dev->buf_len--;
+ if (dev->buf_len)
+ continue;
+
+ davinci_i2c_write_reg(dev,
+ DAVINCI_I2C_STR_REG,
+ DAVINCI_I2C_IMR_RRDY);
+ } else {
+ /* signal can terminate transfer */
+ terminate_read(dev);
+ }
+ break;
+
+ case DAVINCI_I2C_IVR_XRDY:
+ if (dev->buf_len) {
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG,
+ *dev->buf++);
+ dev->buf_len--;
+ if (dev->buf_len)
+ continue;
+
+ w = davinci_i2c_read_reg(dev,
+ DAVINCI_I2C_IMR_REG);
+ w &= ~DAVINCI_I2C_IMR_XRDY;
+ davinci_i2c_write_reg(dev,
+ DAVINCI_I2C_IMR_REG,
+ w);
+ } else {
+ /* signal can terminate transfer */
+ terminate_write(dev);
+ }
+ break;
+
+ case DAVINCI_I2C_IVR_SCD:
+ davinci_i2c_write_reg(dev,
+ DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_SCD);
+ complete(&dev->cmd_complete);
+ break;
+
+ case DAVINCI_I2C_IVR_AAS:
+ dev_dbg(dev->dev, "Address as slave interrupt\n");
+ break;
+
+ default:
+ dev_warn(dev->dev, "Unrecognized irq stat %d\n", stat);
+ break;
+ }
+ }
+
+ return count ? IRQ_HANDLED : IRQ_NONE;
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int i2c_davinci_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct davinci_i2c_dev *dev;
+
+ dev = container_of(nb, struct davinci_i2c_dev, freq_transition);
+
+ i2c_lock_bus(&dev->adapter, I2C_LOCK_ROOT_ADAPTER);
+ if (val == CPUFREQ_PRECHANGE) {
+ davinci_i2c_reset_ctrl(dev, 0);
+ } else if (val == CPUFREQ_POSTCHANGE) {
+ i2c_davinci_calc_clk_dividers(dev);
+ davinci_i2c_reset_ctrl(dev, 1);
+ }
+ i2c_unlock_bus(&dev->adapter, I2C_LOCK_ROOT_ADAPTER);
+
+ return 0;
+}
+
+static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
+{
+ dev->freq_transition.notifier_call = i2c_davinci_cpufreq_transition;
+
+ return cpufreq_register_notifier(&dev->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
+{
+ cpufreq_unregister_notifier(&dev->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+#else
+static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
+{
+ return 0;
+}
+
+static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
+{
+}
+#endif
+
+static const struct i2c_algorithm i2c_davinci_algo = {
+ .master_xfer = i2c_davinci_xfer,
+ .functionality = i2c_davinci_func,
+};
+
+static const struct of_device_id davinci_i2c_of_match[] = {
+ {.compatible = "ti,davinci-i2c", },
+ {.compatible = "ti,keystone-i2c", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, davinci_i2c_of_match);
+
+static int davinci_i2c_probe(struct platform_device *pdev)
+{
+ struct davinci_i2c_dev *dev;
+ struct i2c_adapter *adap;
+ struct resource *mem;
+ struct i2c_bus_recovery_info *rinfo;
+ int r, irq;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ if (!irq)
+ irq = -ENXIO;
+ if (irq != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "can't get irq resource ret=%d\n", irq);
+ return irq;
+ }
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(struct davinci_i2c_dev),
+ GFP_KERNEL);
+ if (!dev) {
+ dev_err(&pdev->dev, "Memory allocation failed\n");
+ return -ENOMEM;
+ }
+
+ init_completion(&dev->cmd_complete);
+
+ dev->dev = &pdev->dev;
+ dev->irq = irq;
+ dev->pdata = dev_get_platdata(&pdev->dev);
+ platform_set_drvdata(pdev, dev);
+
+ if (!dev->pdata && pdev->dev.of_node) {
+ u32 prop;
+
+ dev->pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct davinci_i2c_platform_data), GFP_KERNEL);
+ if (!dev->pdata)
+ return -ENOMEM;
+
+ memcpy(dev->pdata, &davinci_i2c_platform_data_default,
+ sizeof(struct davinci_i2c_platform_data));
+ if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+ &prop))
+ dev->pdata->bus_freq = prop / 1000;
+
+ dev->pdata->has_pfunc =
+ of_property_read_bool(pdev->dev.of_node,
+ "ti,has-pfunc");
+ } else if (!dev->pdata) {
+ dev->pdata = &davinci_i2c_platform_data_default;
+ }
+
+ dev->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dev->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(dev->base)) {
+ return PTR_ERR(dev->base);
+ }
+
+ pm_runtime_set_autosuspend_delay(dev->dev,
+ DAVINCI_I2C_PM_TIMEOUT);
+ pm_runtime_use_autosuspend(dev->dev);
+
+ pm_runtime_enable(dev->dev);
+
+ r = pm_runtime_get_sync(dev->dev);
+ if (r < 0) {
+ dev_err(dev->dev, "failed to runtime_get device: %d\n", r);
+ pm_runtime_put_noidle(dev->dev);
+ return r;
+ }
+
+ i2c_davinci_init(dev);
+
+ r = devm_request_irq(&pdev->dev, dev->irq, i2c_davinci_isr, 0,
+ pdev->name, dev);
+ if (r) {
+ dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
+ goto err_unuse_clocks;
+ }
+
+ r = i2c_davinci_cpufreq_register(dev);
+ if (r) {
+ dev_err(&pdev->dev, "failed to register cpufreq\n");
+ goto err_unuse_clocks;
+ }
+
+ adap = &dev->adapter;
+ i2c_set_adapdata(adap, dev);
+ adap->owner = THIS_MODULE;
+ adap->class = I2C_CLASS_DEPRECATED;
+ strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name));
+ adap->algo = &i2c_davinci_algo;
+ adap->dev.parent = &pdev->dev;
+ adap->timeout = DAVINCI_I2C_TIMEOUT;
+ adap->dev.of_node = pdev->dev.of_node;
+
+ if (dev->pdata->has_pfunc)
+ adap->bus_recovery_info = &davinci_i2c_scl_recovery_info;
+ else if (dev->pdata->gpio_recovery) {
+ rinfo = &davinci_i2c_gpio_recovery_info;
+ adap->bus_recovery_info = rinfo;
+ rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
+ GPIOD_OUT_HIGH_OPEN_DRAIN);
+ if (IS_ERR(rinfo->scl_gpiod)) {
+ r = PTR_ERR(rinfo->scl_gpiod);
+ goto err_unuse_clocks;
+ }
+ rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
+ if (IS_ERR(rinfo->sda_gpiod)) {
+ r = PTR_ERR(rinfo->sda_gpiod);
+ goto err_unuse_clocks;
+ }
+ }
+
+ adap->nr = pdev->id;
+ r = i2c_add_numbered_adapter(adap);
+ if (r)
+ goto err_unuse_clocks;
+
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+
+ return 0;
+
+err_unuse_clocks:
+ pm_runtime_dont_use_autosuspend(dev->dev);
+ pm_runtime_put_sync(dev->dev);
+ pm_runtime_disable(dev->dev);
+
+ return r;
+}
+
+static int davinci_i2c_remove(struct platform_device *pdev)
+{
+ struct davinci_i2c_dev *dev = platform_get_drvdata(pdev);
+ int ret;
+
+ i2c_davinci_cpufreq_deregister(dev);
+
+ i2c_del_adapter(&dev->adapter);
+
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&pdev->dev);
+ return ret;
+ }
+
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
+
+ pm_runtime_dont_use_autosuspend(dev->dev);
+ pm_runtime_put_sync(dev->dev);
+ pm_runtime_disable(dev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int davinci_i2c_suspend(struct device *dev)
+{
+ struct davinci_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+ /* put I2C into reset */
+ davinci_i2c_reset_ctrl(i2c_dev, 0);
+
+ return 0;
+}
+
+static int davinci_i2c_resume(struct device *dev)
+{
+ struct davinci_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+ /* take I2C out of reset */
+ davinci_i2c_reset_ctrl(i2c_dev, 1);
+
+ return 0;
+}
+
+static const struct dev_pm_ops davinci_i2c_pm = {
+ .suspend = davinci_i2c_suspend,
+ .resume = davinci_i2c_resume,
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+};
+
+#define davinci_i2c_pm_ops (&davinci_i2c_pm)
+#else
+#define davinci_i2c_pm_ops NULL
+#endif
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_davinci");
+
+static struct platform_driver davinci_i2c_driver = {
+ .probe = davinci_i2c_probe,
+ .remove = davinci_i2c_remove,
+ .driver = {
+ .name = "i2c_davinci",
+ .pm = davinci_i2c_pm_ops,
+ .of_match_table = davinci_i2c_of_match,
+ },
+};
+
+/* I2C may be needed to bring up other drivers */
+static int __init davinci_i2c_init_driver(void)
+{
+ return platform_driver_register(&davinci_i2c_driver);
+}
+subsys_initcall(davinci_i2c_init_driver);
+
+static void __exit davinci_i2c_exit_driver(void)
+{
+ platform_driver_unregister(&davinci_i2c_driver);
+}
+module_exit(davinci_i2c_exit_driver);
+
+MODULE_AUTHOR("Texas Instruments India");
+MODULE_DESCRIPTION("TI DaVinci I2C bus adapter");
+MODULE_LICENSE("GPL");