v4.19.13 snapshot.
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
new file mode 100644
index 0000000..227651f
--- /dev/null
+++ b/drivers/extcon/extcon-max77693.c
@@ -0,0 +1,1278 @@
+/*
+ * extcon-max77693.c - MAX77693 extcon driver to support MAX77693 MUIC
+ *
+ * Copyright (C) 2012 Samsung Electrnoics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-common.h>
+#include <linux/mfd/max77693-private.h>
+#include <linux/extcon-provider.h>
+#include <linux/regmap.h>
+#include <linux/irqdomain.h>
+
+#define	DEV_NAME			"max77693-muic"
+#define	DELAY_MS_DEFAULT		20000		/* unit: millisecond */
+
+/*
+ * Default value of MAX77693 register to bring up MUIC device.
+ * If user don't set some initial value for MUIC device through platform data,
+ * extcon-max77693 driver use 'default_init_data' to bring up base operation
+ * of MAX77693 MUIC device.
+ */
+static struct max77693_reg_data default_init_data[] = {
+	{
+		/* STATUS2 - [3]ChgDetRun */
+		.addr = MAX77693_MUIC_REG_STATUS2,
+		.data = MAX77693_STATUS2_CHGDETRUN_MASK,
+	}, {
+		/* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */
+		.addr = MAX77693_MUIC_REG_INTMASK1,
+		.data = INTMASK1_ADC1K_MASK
+			| INTMASK1_ADC_MASK,
+	}, {
+		/* INTMASK2 - Unmask [0]ChgTypM */
+		.addr = MAX77693_MUIC_REG_INTMASK2,
+		.data = INTMASK2_CHGTYP_MASK,
+	}, {
+		/* INTMASK3 - Mask all of interrupts */
+		.addr = MAX77693_MUIC_REG_INTMASK3,
+		.data = 0x0,
+	}, {
+		/* CDETCTRL2 */
+		.addr = MAX77693_MUIC_REG_CDETCTRL2,
+		.data = CDETCTRL2_VIDRMEN_MASK
+			| CDETCTRL2_DXOVPEN_MASK,
+	},
+};
+
+enum max77693_muic_adc_debounce_time {
+	ADC_DEBOUNCE_TIME_5MS = 0,
+	ADC_DEBOUNCE_TIME_10MS,
+	ADC_DEBOUNCE_TIME_25MS,
+	ADC_DEBOUNCE_TIME_38_62MS,
+};
+
+struct max77693_muic_info {
+	struct device *dev;
+	struct max77693_dev *max77693;
+	struct extcon_dev *edev;
+	int prev_cable_type;
+	int prev_cable_type_gnd;
+	int prev_chg_type;
+	int prev_button_type;
+	u8 status[2];
+
+	int irq;
+	struct work_struct irq_work;
+	struct mutex mutex;
+
+	/*
+	 * Use delayed workqueue to detect cable state and then
+	 * notify cable state to notifiee/platform through uevent.
+	 * After completing the booting of platform, the extcon provider
+	 * driver should notify cable state to upper layer.
+	 */
+	struct delayed_work wq_detcable;
+
+	/* Button of dock device */
+	struct input_dev *dock;
+
+	/*
+	 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+	 * h/w path of COMP2/COMN1 on CONTROL1 register.
+	 */
+	int path_usb;
+	int path_uart;
+};
+
+enum max77693_muic_cable_group {
+	MAX77693_CABLE_GROUP_ADC = 0,
+	MAX77693_CABLE_GROUP_ADC_GND,
+	MAX77693_CABLE_GROUP_CHG,
+	MAX77693_CABLE_GROUP_VBVOLT,
+};
+
+enum max77693_muic_charger_type {
+	MAX77693_CHARGER_TYPE_NONE = 0,
+	MAX77693_CHARGER_TYPE_USB,
+	MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT,
+	MAX77693_CHARGER_TYPE_DEDICATED_CHG,
+	MAX77693_CHARGER_TYPE_APPLE_500MA,
+	MAX77693_CHARGER_TYPE_APPLE_1A_2A,
+	MAX77693_CHARGER_TYPE_DEAD_BATTERY = 7,
+};
+
+/**
+ * struct max77693_muic_irq
+ * @irq: the index of irq list of MUIC device.
+ * @name: the name of irq.
+ * @virq: the virtual irq to use irq domain
+ */
+struct max77693_muic_irq {
+	unsigned int irq;
+	const char *name;
+	unsigned int virq;
+};
+
+static struct max77693_muic_irq muic_irqs[] = {
+	{ MAX77693_MUIC_IRQ_INT1_ADC,		"muic-ADC" },
+	{ MAX77693_MUIC_IRQ_INT1_ADC_LOW,	"muic-ADCLOW" },
+	{ MAX77693_MUIC_IRQ_INT1_ADC_ERR,	"muic-ADCError" },
+	{ MAX77693_MUIC_IRQ_INT1_ADC1K,		"muic-ADC1K" },
+	{ MAX77693_MUIC_IRQ_INT2_CHGTYP,	"muic-CHGTYP" },
+	{ MAX77693_MUIC_IRQ_INT2_CHGDETREUN,	"muic-CHGDETREUN" },
+	{ MAX77693_MUIC_IRQ_INT2_DCDTMR,	"muic-DCDTMR" },
+	{ MAX77693_MUIC_IRQ_INT2_DXOVP,		"muic-DXOVP" },
+	{ MAX77693_MUIC_IRQ_INT2_VBVOLT,	"muic-VBVOLT" },
+	{ MAX77693_MUIC_IRQ_INT2_VIDRM,		"muic-VIDRM" },
+	{ MAX77693_MUIC_IRQ_INT3_EOC,		"muic-EOC" },
+	{ MAX77693_MUIC_IRQ_INT3_CGMBC,		"muic-CGMBC" },
+	{ MAX77693_MUIC_IRQ_INT3_OVP,		"muic-OVP" },
+	{ MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR,	"muic-MBCCHG_ERR" },
+	{ MAX77693_MUIC_IRQ_INT3_CHG_ENABLED,	"muic-CHG_ENABLED" },
+	{ MAX77693_MUIC_IRQ_INT3_BAT_DET,	"muic-BAT_DET" },
+};
+
+/* Define supported accessory type */
+enum max77693_muic_acc_type {
+	MAX77693_MUIC_ADC_GROUND = 0x0,
+	MAX77693_MUIC_ADC_SEND_END_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S1_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S2_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S3_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S4_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S5_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S6_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S7_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S8_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S9_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S10_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S11_BUTTON,
+	MAX77693_MUIC_ADC_REMOTE_S12_BUTTON,
+	MAX77693_MUIC_ADC_RESERVED_ACC_1,
+	MAX77693_MUIC_ADC_RESERVED_ACC_2,
+	MAX77693_MUIC_ADC_RESERVED_ACC_3,
+	MAX77693_MUIC_ADC_RESERVED_ACC_4,
+	MAX77693_MUIC_ADC_RESERVED_ACC_5,
+	MAX77693_MUIC_ADC_CEA936_AUDIO,
+	MAX77693_MUIC_ADC_PHONE_POWERED_DEV,
+	MAX77693_MUIC_ADC_TTY_CONVERTER,
+	MAX77693_MUIC_ADC_UART_CABLE,
+	MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG,
+	MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF,
+	MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON,
+	MAX77693_MUIC_ADC_AV_CABLE_NOLOAD,
+	MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG,
+	MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF,
+	MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON,
+	MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE,
+	MAX77693_MUIC_ADC_OPEN,
+
+	/*
+	 * The below accessories have same ADC value so ADCLow and
+	 * ADC1K bit is used to separate specific accessory.
+	 */
+						/* ADC|VBVolot|ADCLow|ADC1K| */
+	MAX77693_MUIC_GND_USB_HOST = 0x100,	/* 0x0|      0|     0|    0| */
+	MAX77693_MUIC_GND_USB_HOST_VB = 0x104,	/* 0x0|      1|     0|    0| */
+	MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* 0x0|      0|     1|    0| */
+	MAX77693_MUIC_GND_MHL = 0x103,		/* 0x0|      0|     1|    1| */
+	MAX77693_MUIC_GND_MHL_VB = 0x107,	/* 0x0|      1|     1|    1| */
+};
+
+/*
+ * MAX77693 MUIC device support below list of accessories(external connector)
+ */
+static const unsigned int max77693_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_CHG_USB_SDP,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_CHG_USB_FAST,
+	EXTCON_CHG_USB_SLOW,
+	EXTCON_CHG_USB_CDP,
+	EXTCON_DISP_MHL,
+	EXTCON_JIG,
+	EXTCON_DOCK,
+	EXTCON_NONE,
+};
+
+/*
+ * max77693_muic_set_debounce_time - Set the debounce time of ADC
+ * @info: the instance including private data of max77693 MUIC
+ * @time: the debounce time of ADC
+ */
+static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
+		enum max77693_muic_adc_debounce_time time)
+{
+	int ret;
+
+	switch (time) {
+	case ADC_DEBOUNCE_TIME_5MS:
+	case ADC_DEBOUNCE_TIME_10MS:
+	case ADC_DEBOUNCE_TIME_25MS:
+	case ADC_DEBOUNCE_TIME_38_62MS:
+		/*
+		 * Don't touch BTLDset, JIGset when you want to change adc
+		 * debounce time. If it writes other than 0 to BTLDset, JIGset
+		 * muic device will be reset and loose current state.
+		 */
+		ret = regmap_write(info->max77693->regmap_muic,
+				  MAX77693_MUIC_REG_CTRL3,
+				  time << MAX77693_CONTROL3_ADCDBSET_SHIFT);
+		if (ret) {
+			dev_err(info->dev, "failed to set ADC debounce time\n");
+			return ret;
+		}
+		break;
+	default:
+		dev_err(info->dev, "invalid ADC debounce time\n");
+		return -EINVAL;
+	}
+
+	return 0;
+};
+
+/*
+ * max77693_muic_set_path - Set hardware line according to attached cable
+ * @info: the instance including private data of max77693 MUIC
+ * @value: the path according to attached cable
+ * @attached: the state of cable (true:attached, false:detached)
+ *
+ * The max77693 MUIC device share outside H/W line among a varity of cables
+ * so, this function set internal path of H/W line according to the type of
+ * attached cable.
+ */
+static int max77693_muic_set_path(struct max77693_muic_info *info,
+		u8 val, bool attached)
+{
+	int ret;
+	unsigned int ctrl1, ctrl2 = 0;
+
+	if (attached)
+		ctrl1 = val;
+	else
+		ctrl1 = MAX77693_CONTROL1_SW_OPEN;
+
+	ret = regmap_update_bits(info->max77693->regmap_muic,
+			MAX77693_MUIC_REG_CTRL1, COMP_SW_MASK, ctrl1);
+	if (ret < 0) {
+		dev_err(info->dev, "failed to update MUIC register\n");
+		return ret;
+	}
+
+	if (attached)
+		ctrl2 |= MAX77693_CONTROL2_CPEN_MASK;	/* LowPwr=0, CPEn=1 */
+	else
+		ctrl2 |= MAX77693_CONTROL2_LOWPWR_MASK;	/* LowPwr=1, CPEn=0 */
+
+	ret = regmap_update_bits(info->max77693->regmap_muic,
+			MAX77693_MUIC_REG_CTRL2,
+			MAX77693_CONTROL2_LOWPWR_MASK | MAX77693_CONTROL2_CPEN_MASK,
+			ctrl2);
+	if (ret < 0) {
+		dev_err(info->dev, "failed to update MUIC register\n");
+		return ret;
+	}
+
+	dev_info(info->dev,
+		"CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
+		ctrl1, ctrl2, attached ? "attached" : "detached");
+
+	return 0;
+}
+
+/*
+ * max77693_muic_get_cable_type - Return cable type and check cable state
+ * @info: the instance including private data of max77693 MUIC
+ * @group: the path according to attached cable
+ * @attached: store cable state and return
+ *
+ * This function check the cable state either attached or detached,
+ * and then divide precise type of cable according to cable group.
+ *	- MAX77693_CABLE_GROUP_ADC
+ *	- MAX77693_CABLE_GROUP_ADC_GND
+ *	- MAX77693_CABLE_GROUP_CHG
+ *	- MAX77693_CABLE_GROUP_VBVOLT
+ */
+static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
+		enum max77693_muic_cable_group group, bool *attached)
+{
+	int cable_type = 0;
+	int adc;
+	int adc1k;
+	int adclow;
+	int vbvolt;
+	int chg_type;
+
+	switch (group) {
+	case MAX77693_CABLE_GROUP_ADC:
+		/*
+		 * Read ADC value to check cable type and decide cable state
+		 * according to cable type
+		 */
+		adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+		adc >>= MAX77693_STATUS1_ADC_SHIFT;
+
+		/*
+		 * Check current cable state/cable type and store cable type
+		 * (info->prev_cable_type) for handling cable when cable is
+		 * detached.
+		 */
+		if (adc == MAX77693_MUIC_ADC_OPEN) {
+			*attached = false;
+
+			cable_type = info->prev_cable_type;
+			info->prev_cable_type = MAX77693_MUIC_ADC_OPEN;
+		} else {
+			*attached = true;
+
+			cable_type = info->prev_cable_type = adc;
+		}
+		break;
+	case MAX77693_CABLE_GROUP_ADC_GND:
+		/*
+		 * Read ADC value to check cable type and decide cable state
+		 * according to cable type
+		 */
+		adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+		adc >>= MAX77693_STATUS1_ADC_SHIFT;
+
+		/*
+		 * Check current cable state/cable type and store cable type
+		 * (info->prev_cable_type/_gnd) for handling cable when cable
+		 * is detached.
+		 */
+		if (adc == MAX77693_MUIC_ADC_OPEN) {
+			*attached = false;
+
+			cable_type = info->prev_cable_type_gnd;
+			info->prev_cable_type_gnd = MAX77693_MUIC_ADC_OPEN;
+		} else {
+			*attached = true;
+
+			adclow = info->status[0] & MAX77693_STATUS1_ADCLOW_MASK;
+			adclow >>= MAX77693_STATUS1_ADCLOW_SHIFT;
+			adc1k = info->status[0] & MAX77693_STATUS1_ADC1K_MASK;
+			adc1k >>= MAX77693_STATUS1_ADC1K_SHIFT;
+
+			vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
+			vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
+
+			/**
+			 * [0x1|VBVolt|ADCLow|ADC1K]
+			 * [0x1|     0|     0|    0] USB_HOST
+			 * [0x1|     1|     0|    0] USB_HSOT_VB
+			 * [0x1|     0|     1|    0] Audio Video cable with load
+			 * [0x1|     0|     1|    1] MHL without charging cable
+			 * [0x1|     1|     1|    1] MHL with charging cable
+			 */
+			cable_type = ((0x1 << 8)
+					| (vbvolt << 2)
+					| (adclow << 1)
+					| adc1k);
+
+			info->prev_cable_type = adc;
+			info->prev_cable_type_gnd = cable_type;
+		}
+
+		break;
+	case MAX77693_CABLE_GROUP_CHG:
+		/*
+		 * Read charger type to check cable type and decide cable state
+		 * according to type of charger cable.
+		 */
+		chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
+		chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
+
+		if (chg_type == MAX77693_CHARGER_TYPE_NONE) {
+			*attached = false;
+
+			cable_type = info->prev_chg_type;
+			info->prev_chg_type = MAX77693_CHARGER_TYPE_NONE;
+		} else {
+			*attached = true;
+
+			/*
+			 * Check current cable state/cable type and store cable
+			 * type(info->prev_chg_type) for handling cable when
+			 * charger cable is detached.
+			 */
+			cable_type = info->prev_chg_type = chg_type;
+		}
+
+		break;
+	case MAX77693_CABLE_GROUP_VBVOLT:
+		/*
+		 * Read ADC value to check cable type and decide cable state
+		 * according to cable type
+		 */
+		adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+		adc >>= MAX77693_STATUS1_ADC_SHIFT;
+		chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
+		chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
+
+		if (adc == MAX77693_MUIC_ADC_OPEN
+				&& chg_type == MAX77693_CHARGER_TYPE_NONE)
+			*attached = false;
+		else
+			*attached = true;
+
+		/*
+		 * Read vbvolt field, if vbvolt is 1,
+		 * this cable is used for charging.
+		 */
+		vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
+		vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
+
+		cable_type = vbvolt;
+		break;
+	default:
+		dev_err(info->dev, "Unknown cable group (%d)\n", group);
+		cable_type = -EINVAL;
+		break;
+	}
+
+	return cable_type;
+}
+
+static int max77693_muic_dock_handler(struct max77693_muic_info *info,
+		int cable_type, bool attached)
+{
+	int ret = 0;
+	int vbvolt;
+	bool cable_attached;
+	unsigned int dock_id;
+
+	dev_info(info->dev,
+		"external connector is %s (adc:0x%02x)\n",
+		attached ? "attached" : "detached", cable_type);
+
+	switch (cable_type) {
+	case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
+		/*
+		 * Check power cable whether attached or detached state.
+		 * The Dock-Smart device need surely external power supply.
+		 * If power cable(USB/TA) isn't connected to Dock device,
+		 * user can't use Dock-Smart for desktop mode.
+		 */
+		vbvolt = max77693_muic_get_cable_type(info,
+				MAX77693_CABLE_GROUP_VBVOLT, &cable_attached);
+		if (attached && !vbvolt) {
+			dev_warn(info->dev,
+				"Cannot detect external power supply\n");
+			return 0;
+		}
+
+		/*
+		 * Notify Dock/MHL state.
+		 * - Dock device include three type of cable which
+		 * are HDMI, USB for mouse/keyboard and micro-usb port
+		 * for USB/TA cable. Dock device need always exteranl
+		 * power supply(USB/TA cable through micro-usb cable). Dock
+		 * device support screen output of target to separate
+		 * monitor and mouse/keyboard for desktop mode.
+		 *
+		 * Features of 'USB/TA cable with Dock device'
+		 * - Support MHL
+		 * - Support external output feature of audio
+		 * - Support charging through micro-usb port without data
+		 *	     connection if TA cable is connected to target.
+		 * - Support charging and data connection through micro-usb port
+		 *           if USB cable is connected between target and host
+		 *	     device.
+		 * - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard)
+		 */
+		ret = max77693_muic_set_path(info, info->path_usb, attached);
+		if (ret < 0)
+			return ret;
+
+		extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
+		goto out;
+	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
+		dock_id = EXTCON_DOCK;
+		break;
+	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
+		dock_id = EXTCON_DOCK;
+		if (!attached) {
+			extcon_set_state_sync(info->edev, EXTCON_USB, false);
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
+						false);
+		}
+		break;
+	default:
+		dev_err(info->dev, "failed to detect %s dock device\n",
+			attached ? "attached" : "detached");
+		return -EINVAL;
+	}
+
+	/* Dock-Car/Desk/Audio, PATH:AUDIO */
+	ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
+					attached);
+	if (ret < 0)
+		return ret;
+	extcon_set_state_sync(info->edev, dock_id, attached);
+
+out:
+	return 0;
+}
+
+static int max77693_muic_dock_button_handler(struct max77693_muic_info *info,
+		int button_type, bool attached)
+{
+	struct input_dev *dock = info->dock;
+	unsigned int code;
+
+	switch (button_type) {
+	case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON-1
+		... MAX77693_MUIC_ADC_REMOTE_S3_BUTTON+1:
+		/* DOCK_KEY_PREV */
+		code = KEY_PREVIOUSSONG;
+		break;
+	case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON-1
+		... MAX77693_MUIC_ADC_REMOTE_S7_BUTTON+1:
+		/* DOCK_KEY_NEXT */
+		code = KEY_NEXTSONG;
+		break;
+	case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON:
+		/* DOCK_VOL_DOWN */
+		code = KEY_VOLUMEDOWN;
+		break;
+	case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON:
+		/* DOCK_VOL_UP */
+		code = KEY_VOLUMEUP;
+		break;
+	case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON-1
+		... MAX77693_MUIC_ADC_REMOTE_S12_BUTTON+1:
+		/* DOCK_KEY_PLAY_PAUSE */
+		code = KEY_PLAYPAUSE;
+		break;
+	default:
+		dev_err(info->dev,
+			"failed to detect %s key (adc:0x%x)\n",
+			attached ? "pressed" : "released", button_type);
+		return -EINVAL;
+	}
+
+	input_event(dock, EV_KEY, code, attached);
+	input_sync(dock);
+
+	return 0;
+}
+
+static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
+{
+	int cable_type_gnd;
+	int ret = 0;
+	bool attached;
+
+	cable_type_gnd = max77693_muic_get_cable_type(info,
+				MAX77693_CABLE_GROUP_ADC_GND, &attached);
+
+	switch (cable_type_gnd) {
+	case MAX77693_MUIC_GND_USB_HOST:
+	case MAX77693_MUIC_GND_USB_HOST_VB:
+		/* USB_HOST, PATH: AP_USB */
+		ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_USB,
+						attached);
+		if (ret < 0)
+			return ret;
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
+		break;
+	case MAX77693_MUIC_GND_AV_CABLE_LOAD:
+		/* Audio Video Cable with load, PATH:AUDIO */
+		ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
+						attached);
+		if (ret < 0)
+			return ret;
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
+					attached);
+		break;
+	case MAX77693_MUIC_GND_MHL:
+	case MAX77693_MUIC_GND_MHL_VB:
+		/* MHL or MHL with USB/TA cable */
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
+		break;
+	default:
+		dev_err(info->dev, "failed to detect %s cable of gnd type\n",
+			attached ? "attached" : "detached");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int max77693_muic_jig_handler(struct max77693_muic_info *info,
+		int cable_type, bool attached)
+{
+	int ret = 0;
+	u8 path = MAX77693_CONTROL1_SW_OPEN;
+
+	dev_info(info->dev,
+		"external connector is %s (adc:0x%02x)\n",
+		attached ? "attached" : "detached", cable_type);
+
+	switch (cable_type) {
+	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:	/* ADC_JIG_USB_OFF */
+	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:	/* ADC_JIG_USB_ON */
+		/* PATH:AP_USB */
+		path = MAX77693_CONTROL1_SW_USB;
+		break;
+	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:	/* ADC_JIG_UART_OFF */
+	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* ADC_JIG_UART_ON */
+		/* PATH:AP_UART */
+		path = MAX77693_CONTROL1_SW_UART;
+		break;
+	default:
+		dev_err(info->dev, "failed to detect %s jig cable\n",
+			attached ? "attached" : "detached");
+		return -EINVAL;
+	}
+
+	ret = max77693_muic_set_path(info, path, attached);
+	if (ret < 0)
+		return ret;
+
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
+
+	return 0;
+}
+
+static int max77693_muic_adc_handler(struct max77693_muic_info *info)
+{
+	int cable_type;
+	int button_type;
+	bool attached;
+	int ret = 0;
+
+	/* Check accessory state which is either detached or attached */
+	cable_type = max77693_muic_get_cable_type(info,
+				MAX77693_CABLE_GROUP_ADC, &attached);
+
+	dev_info(info->dev,
+		"external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
+		attached ? "attached" : "detached", cable_type,
+		info->prev_cable_type);
+
+	switch (cable_type) {
+	case MAX77693_MUIC_ADC_GROUND:
+		/* USB_HOST/MHL/Audio */
+		max77693_muic_adc_ground_handler(info);
+		break;
+	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:
+	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:
+	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:
+	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:
+		/* JIG */
+		ret = max77693_muic_jig_handler(info, cable_type, attached);
+		if (ret < 0)
+			return ret;
+		break;
+	case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
+	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
+	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
+		/*
+		 * DOCK device
+		 *
+		 * The MAX77693 MUIC device can detect total 34 cable type
+		 * except of charger cable and MUIC device didn't define
+		 * specfic role of cable in the range of from 0x01 to 0x12
+		 * of ADC value. So, can use/define cable with no role according
+		 * to schema of hardware board.
+		 */
+		ret = max77693_muic_dock_handler(info, cable_type, attached);
+		if (ret < 0)
+			return ret;
+		break;
+	case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON:      /* DOCK_KEY_PREV */
+	case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON:      /* DOCK_KEY_NEXT */
+	case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON:      /* DOCK_VOL_DOWN */
+	case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON:     /* DOCK_VOL_UP */
+	case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON:     /* DOCK_KEY_PLAY_PAUSE */
+		/*
+		 * Button of DOCK device
+		 * - the Prev/Next/Volume Up/Volume Down/Play-Pause button
+		 *
+		 * The MAX77693 MUIC device can detect total 34 cable type
+		 * except of charger cable and MUIC device didn't define
+		 * specfic role of cable in the range of from 0x01 to 0x12
+		 * of ADC value. So, can use/define cable with no role according
+		 * to schema of hardware board.
+		 */
+		if (attached)
+			button_type = info->prev_button_type = cable_type;
+		else
+			button_type = info->prev_button_type;
+
+		ret = max77693_muic_dock_button_handler(info, button_type,
+							attached);
+		if (ret < 0)
+			return ret;
+		break;
+	case MAX77693_MUIC_ADC_SEND_END_BUTTON:
+	case MAX77693_MUIC_ADC_REMOTE_S1_BUTTON:
+	case MAX77693_MUIC_ADC_REMOTE_S2_BUTTON:
+	case MAX77693_MUIC_ADC_REMOTE_S4_BUTTON:
+	case MAX77693_MUIC_ADC_REMOTE_S5_BUTTON:
+	case MAX77693_MUIC_ADC_REMOTE_S6_BUTTON:
+	case MAX77693_MUIC_ADC_REMOTE_S8_BUTTON:
+	case MAX77693_MUIC_ADC_REMOTE_S11_BUTTON:
+	case MAX77693_MUIC_ADC_RESERVED_ACC_1:
+	case MAX77693_MUIC_ADC_RESERVED_ACC_2:
+	case MAX77693_MUIC_ADC_RESERVED_ACC_4:
+	case MAX77693_MUIC_ADC_RESERVED_ACC_5:
+	case MAX77693_MUIC_ADC_CEA936_AUDIO:
+	case MAX77693_MUIC_ADC_PHONE_POWERED_DEV:
+	case MAX77693_MUIC_ADC_TTY_CONVERTER:
+	case MAX77693_MUIC_ADC_UART_CABLE:
+	case MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG:
+	case MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG:
+		/*
+		 * This accessory isn't used in general case if it is specially
+		 * needed to detect additional accessory, should implement
+		 * proper operation when this accessory is attached/detached.
+		 */
+		dev_info(info->dev,
+			"accessory is %s but it isn't used (adc:0x%x)\n",
+			attached ? "attached" : "detached", cable_type);
+		return -EAGAIN;
+	default:
+		dev_err(info->dev,
+			"failed to detect %s accessory (adc:0x%x)\n",
+			attached ? "attached" : "detached", cable_type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int max77693_muic_chg_handler(struct max77693_muic_info *info)
+{
+	int chg_type;
+	int cable_type_gnd;
+	int cable_type;
+	bool attached;
+	bool cable_attached;
+	int ret = 0;
+
+	chg_type = max77693_muic_get_cable_type(info,
+				MAX77693_CABLE_GROUP_CHG, &attached);
+
+	dev_info(info->dev,
+		"external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
+			attached ? "attached" : "detached",
+			chg_type, info->prev_chg_type);
+
+	switch (chg_type) {
+	case MAX77693_CHARGER_TYPE_USB:
+	case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
+	case MAX77693_CHARGER_TYPE_NONE:
+		/* Check MAX77693_CABLE_GROUP_ADC_GND type */
+		cable_type_gnd = max77693_muic_get_cable_type(info,
+					MAX77693_CABLE_GROUP_ADC_GND,
+					&cable_attached);
+		switch (cable_type_gnd) {
+		case MAX77693_MUIC_GND_MHL:
+		case MAX77693_MUIC_GND_MHL_VB:
+			/*
+			 * MHL cable with USB/TA cable
+			 * - MHL cable include two port(HDMI line and separate
+			 * micro-usb port. When the target connect MHL cable,
+			 * extcon driver check whether USB/TA cable is
+			 * connected. If USB/TA cable is connected, extcon
+			 * driver notify state to notifiee for charging battery.
+			 *
+			 * Features of 'USB/TA with MHL cable'
+			 * - Support MHL
+			 * - Support charging through micro-usb port without
+			 *   data connection
+			 */
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
+						attached);
+			extcon_set_state_sync(info->edev, EXTCON_DISP_MHL,
+						cable_attached);
+			break;
+		}
+
+		/* Check MAX77693_CABLE_GROUP_ADC type */
+		cable_type = max77693_muic_get_cable_type(info,
+					MAX77693_CABLE_GROUP_ADC,
+					&cable_attached);
+		switch (cable_type) {
+		case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
+			/*
+			 * Dock-Audio device with USB/TA cable
+			 * - Dock device include two port(Dock-Audio and micro-
+			 * usb port). When the target connect Dock-Audio device,
+			 * extcon driver check whether USB/TA cable is connected
+			 * or not. If USB/TA cable is connected, extcon driver
+			 * notify state to notifiee for charging battery.
+			 *
+			 * Features of 'USB/TA cable with Dock-Audio device'
+			 * - Support external output feature of audio.
+			 * - Support charging through micro-usb port without
+			 *   data connection.
+			 */
+			extcon_set_state_sync(info->edev, EXTCON_USB,
+						attached);
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
+						attached);
+
+			if (!cable_attached)
+				extcon_set_state_sync(info->edev, EXTCON_DOCK,
+							cable_attached);
+			break;
+		case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
+			/*
+			 * Dock-Smart device with USB/TA cable
+			 * - Dock-Desk device include three type of cable which
+			 * are HDMI, USB for mouse/keyboard and micro-usb port
+			 * for USB/TA cable. Dock-Smart device need always
+			 * exteranl power supply(USB/TA cable through micro-usb
+			 * cable). Dock-Smart device support screen output of
+			 * target to separate monitor and mouse/keyboard for
+			 * desktop mode.
+			 *
+			 * Features of 'USB/TA cable with Dock-Smart device'
+			 * - Support MHL
+			 * - Support external output feature of audio
+			 * - Support charging through micro-usb port without
+			 *   data connection if TA cable is connected to target.
+			 * - Support charging and data connection through micro-
+			 *   usb port if USB cable is connected between target
+			 *   and host device
+			 * - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard)
+			 */
+			ret = max77693_muic_set_path(info, info->path_usb,
+						    attached);
+			if (ret < 0)
+				return ret;
+
+			extcon_set_state_sync(info->edev, EXTCON_DOCK,
+						attached);
+			extcon_set_state_sync(info->edev, EXTCON_DISP_MHL,
+						attached);
+			break;
+		}
+
+		/* Check MAX77693_CABLE_GROUP_CHG type */
+		switch (chg_type) {
+		case MAX77693_CHARGER_TYPE_NONE:
+			/*
+			 * When MHL(with USB/TA cable) or Dock-Audio with USB/TA
+			 * cable is attached, muic device happen below two irq.
+			 * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting
+			 *    MHL/Dock-Audio.
+			 * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting
+			 *    USB/TA cable connected to MHL or Dock-Audio.
+			 * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC
+			 * irq than MAX77693_MUIC_IRQ_INT2_CHGTYP irq.
+			 *
+			 * If user attach MHL (with USB/TA cable and immediately
+			 * detach MHL with USB/TA cable before MAX77693_MUIC_IRQ
+			 * _INT2_CHGTYP irq is happened, USB/TA cable remain
+			 * connected state to target. But USB/TA cable isn't
+			 * connected to target. The user be face with unusual
+			 * action. So, driver should check this situation in
+			 * spite of, that previous charger type is N/A.
+			 */
+			break;
+		case MAX77693_CHARGER_TYPE_USB:
+			/* Only USB cable, PATH:AP_USB */
+			ret = max77693_muic_set_path(info, info->path_usb,
+						    attached);
+			if (ret < 0)
+				return ret;
+
+			extcon_set_state_sync(info->edev, EXTCON_USB,
+						attached);
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
+						attached);
+			break;
+		case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
+			/* Only TA cable */
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
+						attached);
+			break;
+		}
+		break;
+	case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
+					attached);
+		break;
+	case MAX77693_CHARGER_TYPE_APPLE_500MA:
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
+					attached);
+		break;
+	case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
+					attached);
+		break;
+	case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
+		break;
+	default:
+		dev_err(info->dev,
+			"failed to detect %s accessory (chg_type:0x%x)\n",
+			attached ? "attached" : "detached", chg_type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void max77693_muic_irq_work(struct work_struct *work)
+{
+	struct max77693_muic_info *info = container_of(work,
+			struct max77693_muic_info, irq_work);
+	int irq_type = -1;
+	int i, ret = 0;
+
+	if (!info->edev)
+		return;
+
+	mutex_lock(&info->mutex);
+
+	for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
+		if (info->irq == muic_irqs[i].virq)
+			irq_type = muic_irqs[i].irq;
+
+	ret = regmap_bulk_read(info->max77693->regmap_muic,
+			MAX77693_MUIC_REG_STATUS1, info->status, 2);
+	if (ret) {
+		dev_err(info->dev, "failed to read MUIC register\n");
+		mutex_unlock(&info->mutex);
+		return;
+	}
+
+	switch (irq_type) {
+	case MAX77693_MUIC_IRQ_INT1_ADC:
+	case MAX77693_MUIC_IRQ_INT1_ADC_LOW:
+	case MAX77693_MUIC_IRQ_INT1_ADC_ERR:
+	case MAX77693_MUIC_IRQ_INT1_ADC1K:
+		/*
+		 * Handle all of accessory except for
+		 * type of charger accessory.
+		 */
+		ret = max77693_muic_adc_handler(info);
+		break;
+	case MAX77693_MUIC_IRQ_INT2_CHGTYP:
+	case MAX77693_MUIC_IRQ_INT2_CHGDETREUN:
+	case MAX77693_MUIC_IRQ_INT2_DCDTMR:
+	case MAX77693_MUIC_IRQ_INT2_DXOVP:
+	case MAX77693_MUIC_IRQ_INT2_VBVOLT:
+	case MAX77693_MUIC_IRQ_INT2_VIDRM:
+		/* Handle charger accessory */
+		ret = max77693_muic_chg_handler(info);
+		break;
+	case MAX77693_MUIC_IRQ_INT3_EOC:
+	case MAX77693_MUIC_IRQ_INT3_CGMBC:
+	case MAX77693_MUIC_IRQ_INT3_OVP:
+	case MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR:
+	case MAX77693_MUIC_IRQ_INT3_CHG_ENABLED:
+	case MAX77693_MUIC_IRQ_INT3_BAT_DET:
+		break;
+	default:
+		dev_err(info->dev, "muic interrupt: irq %d occurred\n",
+				irq_type);
+		mutex_unlock(&info->mutex);
+		return;
+	}
+
+	if (ret < 0)
+		dev_err(info->dev, "failed to handle MUIC interrupt\n");
+
+	mutex_unlock(&info->mutex);
+}
+
+static irqreturn_t max77693_muic_irq_handler(int irq, void *data)
+{
+	struct max77693_muic_info *info = data;
+
+	info->irq = irq;
+	schedule_work(&info->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static const struct regmap_config max77693_muic_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int max77693_muic_detect_accessory(struct max77693_muic_info *info)
+{
+	int ret = 0;
+	int adc;
+	int chg_type;
+	bool attached;
+
+	mutex_lock(&info->mutex);
+
+	/* Read STATUSx register to detect accessory */
+	ret = regmap_bulk_read(info->max77693->regmap_muic,
+			MAX77693_MUIC_REG_STATUS1, info->status, 2);
+	if (ret) {
+		dev_err(info->dev, "failed to read MUIC register\n");
+		mutex_unlock(&info->mutex);
+		return ret;
+	}
+
+	adc = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_ADC,
+					&attached);
+	if (attached && adc != MAX77693_MUIC_ADC_OPEN) {
+		ret = max77693_muic_adc_handler(info);
+		if (ret < 0) {
+			dev_err(info->dev, "Cannot detect accessory\n");
+			mutex_unlock(&info->mutex);
+			return ret;
+		}
+	}
+
+	chg_type = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_CHG,
+					&attached);
+	if (attached && chg_type != MAX77693_CHARGER_TYPE_NONE) {
+		ret = max77693_muic_chg_handler(info);
+		if (ret < 0) {
+			dev_err(info->dev, "Cannot detect charger accessory\n");
+			mutex_unlock(&info->mutex);
+			return ret;
+		}
+	}
+
+	mutex_unlock(&info->mutex);
+
+	return 0;
+}
+
+static void max77693_muic_detect_cable_wq(struct work_struct *work)
+{
+	struct max77693_muic_info *info = container_of(to_delayed_work(work),
+				struct max77693_muic_info, wq_detcable);
+
+	max77693_muic_detect_accessory(info);
+}
+
+static int max77693_muic_probe(struct platform_device *pdev)
+{
+	struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
+	struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
+	struct max77693_muic_info *info;
+	struct max77693_reg_data *init_data;
+	int num_init_data;
+	int delay_jiffies;
+	int ret;
+	int i;
+	unsigned int id;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct max77693_muic_info),
+				   GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = &pdev->dev;
+	info->max77693 = max77693;
+	if (info->max77693->regmap_muic) {
+		dev_dbg(&pdev->dev, "allocate register map\n");
+	} else {
+		info->max77693->regmap_muic = devm_regmap_init_i2c(
+						info->max77693->i2c_muic,
+						&max77693_muic_regmap_config);
+		if (IS_ERR(info->max77693->regmap_muic)) {
+			ret = PTR_ERR(info->max77693->regmap_muic);
+			dev_err(max77693->dev,
+				"failed to allocate register map: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* Register input device for button of dock device */
+	info->dock = devm_input_allocate_device(&pdev->dev);
+	if (!info->dock) {
+		dev_err(&pdev->dev, "%s: failed to allocate input\n", __func__);
+		return -ENOMEM;
+	}
+	info->dock->name = "max77693-muic/dock";
+	info->dock->phys = "max77693-muic/extcon";
+	info->dock->dev.parent = &pdev->dev;
+
+	__set_bit(EV_REP, info->dock->evbit);
+
+	input_set_capability(info->dock, EV_KEY, KEY_VOLUMEUP);
+	input_set_capability(info->dock, EV_KEY, KEY_VOLUMEDOWN);
+	input_set_capability(info->dock, EV_KEY, KEY_PLAYPAUSE);
+	input_set_capability(info->dock, EV_KEY, KEY_PREVIOUSSONG);
+	input_set_capability(info->dock, EV_KEY, KEY_NEXTSONG);
+
+	ret = input_register_device(info->dock);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Cannot register input device error(%d)\n",
+				ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, info);
+	mutex_init(&info->mutex);
+
+	INIT_WORK(&info->irq_work, max77693_muic_irq_work);
+
+	/* Support irq domain for MAX77693 MUIC device */
+	for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) {
+		struct max77693_muic_irq *muic_irq = &muic_irqs[i];
+		int virq;
+
+		virq = regmap_irq_get_virq(max77693->irq_data_muic,
+					muic_irq->irq);
+		if (virq <= 0)
+			return -EINVAL;
+		muic_irq->virq = virq;
+
+		ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
+				max77693_muic_irq_handler,
+				IRQF_NO_SUSPEND,
+				muic_irq->name, info);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"failed: irq request (IRQ: %d, error :%d)\n",
+				muic_irq->irq, ret);
+			return ret;
+		}
+	}
+
+	/* Initialize extcon device */
+	info->edev = devm_extcon_dev_allocate(&pdev->dev,
+					      max77693_extcon_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
+		return -ENOMEM;
+	}
+
+	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	/* Initialize MUIC register by using platform data or default data */
+	if (pdata && pdata->muic_data) {
+		init_data = pdata->muic_data->init_data;
+		num_init_data = pdata->muic_data->num_init_data;
+	} else {
+		init_data = default_init_data;
+		num_init_data = ARRAY_SIZE(default_init_data);
+	}
+
+	for (i = 0; i < num_init_data; i++) {
+		regmap_write(info->max77693->regmap_muic,
+				init_data[i].addr,
+				init_data[i].data);
+	}
+
+	if (pdata && pdata->muic_data) {
+		struct max77693_muic_platform_data *muic_pdata
+						   = pdata->muic_data;
+
+		/*
+		 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+		 * h/w path of COMP2/COMN1 on CONTROL1 register.
+		 */
+		if (muic_pdata->path_uart)
+			info->path_uart = muic_pdata->path_uart;
+		else
+			info->path_uart = MAX77693_CONTROL1_SW_UART;
+
+		if (muic_pdata->path_usb)
+			info->path_usb = muic_pdata->path_usb;
+		else
+			info->path_usb = MAX77693_CONTROL1_SW_USB;
+
+		/*
+		 * Default delay time for detecting cable state
+		 * after certain time.
+		 */
+		if (muic_pdata->detcable_delay_ms)
+			delay_jiffies =
+				msecs_to_jiffies(muic_pdata->detcable_delay_ms);
+		else
+			delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+	} else {
+		info->path_usb = MAX77693_CONTROL1_SW_USB;
+		info->path_uart = MAX77693_CONTROL1_SW_UART;
+		delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+	}
+
+	/* Set initial path for UART */
+	 max77693_muic_set_path(info, info->path_uart, true);
+
+	/* Check revision number of MUIC device*/
+	ret = regmap_read(info->max77693->regmap_muic,
+			MAX77693_MUIC_REG_ID, &id);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to read revision number\n");
+		return ret;
+	}
+	dev_info(info->dev, "device ID : 0x%x\n", id);
+
+	/* Set ADC debounce time */
+	max77693_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS);
+
+	/*
+	 * Detect accessory after completing the initialization of platform
+	 *
+	 * - Use delayed workqueue to detect cable state and then
+	 * notify cable state to notifiee/platform through uevent.
+	 * After completing the booting of platform, the extcon provider
+	 * driver should notify cable state to upper layer.
+	 */
+	INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq);
+	queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
+			delay_jiffies);
+
+	return ret;
+}
+
+static int max77693_muic_remove(struct platform_device *pdev)
+{
+	struct max77693_muic_info *info = platform_get_drvdata(pdev);
+
+	cancel_work_sync(&info->irq_work);
+	input_unregister_device(info->dock);
+
+	return 0;
+}
+
+static struct platform_driver max77693_muic_driver = {
+	.driver		= {
+		.name	= DEV_NAME,
+	},
+	.probe		= max77693_muic_probe,
+	.remove		= max77693_muic_remove,
+};
+
+module_platform_driver(max77693_muic_driver);
+
+MODULE_DESCRIPTION("Maxim MAX77693 Extcon driver");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:extcon-max77693");