v4.19.13 snapshot.
diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
new file mode 100644
index 0000000..cd8d689
--- /dev/null
+++ b/drivers/clk/at91/clk-utmi.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <soc/at91/atmel-sfr.h>
+
+#include "pmc.h"
+
+/*
+ * The purpose of this clock is to generate a 480 MHz signal. A different
+ * rate can't be configured.
+ */
+#define UTMI_RATE 480000000
+
+struct clk_utmi {
+ struct clk_hw hw;
+ struct regmap *regmap_pmc;
+ struct regmap *regmap_sfr;
+};
+
+#define to_clk_utmi(hw) container_of(hw, struct clk_utmi, hw)
+
+static inline bool clk_utmi_ready(struct regmap *regmap)
+{
+ unsigned int status;
+
+ regmap_read(regmap, AT91_PMC_SR, &status);
+
+ return status & AT91_PMC_LOCKU;
+}
+
+static int clk_utmi_prepare(struct clk_hw *hw)
+{
+ struct clk_hw *hw_parent;
+ struct clk_utmi *utmi = to_clk_utmi(hw);
+ unsigned int uckr = AT91_PMC_UPLLEN | AT91_PMC_UPLLCOUNT |
+ AT91_PMC_BIASEN;
+ unsigned int utmi_ref_clk_freq;
+ unsigned long parent_rate;
+
+ /*
+ * If mainck rate is different from 12 MHz, we have to configure the
+ * FREQ field of the SFR_UTMICKTRIM register to generate properly
+ * the utmi clock.
+ */
+ hw_parent = clk_hw_get_parent(hw);
+ parent_rate = clk_hw_get_rate(hw_parent);
+
+ switch (parent_rate) {
+ case 12000000:
+ utmi_ref_clk_freq = 0;
+ break;
+ case 16000000:
+ utmi_ref_clk_freq = 1;
+ break;
+ case 24000000:
+ utmi_ref_clk_freq = 2;
+ break;
+ /*
+ * Not supported on SAMA5D2 but it's not an issue since MAINCK
+ * maximum value is 24 MHz.
+ */
+ case 48000000:
+ utmi_ref_clk_freq = 3;
+ break;
+ default:
+ pr_err("UTMICK: unsupported mainck rate\n");
+ return -EINVAL;
+ }
+
+ if (utmi->regmap_sfr) {
+ regmap_update_bits(utmi->regmap_sfr, AT91_SFR_UTMICKTRIM,
+ AT91_UTMICKTRIM_FREQ, utmi_ref_clk_freq);
+ } else if (utmi_ref_clk_freq) {
+ pr_err("UTMICK: sfr node required\n");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(utmi->regmap_pmc, AT91_CKGR_UCKR, uckr, uckr);
+
+ while (!clk_utmi_ready(utmi->regmap_pmc))
+ cpu_relax();
+
+ return 0;
+}
+
+static int clk_utmi_is_prepared(struct clk_hw *hw)
+{
+ struct clk_utmi *utmi = to_clk_utmi(hw);
+
+ return clk_utmi_ready(utmi->regmap_pmc);
+}
+
+static void clk_utmi_unprepare(struct clk_hw *hw)
+{
+ struct clk_utmi *utmi = to_clk_utmi(hw);
+
+ regmap_update_bits(utmi->regmap_pmc, AT91_CKGR_UCKR,
+ AT91_PMC_UPLLEN, 0);
+}
+
+static unsigned long clk_utmi_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ /* UTMI clk rate is fixed. */
+ return UTMI_RATE;
+}
+
+static const struct clk_ops utmi_ops = {
+ .prepare = clk_utmi_prepare,
+ .unprepare = clk_utmi_unprepare,
+ .is_prepared = clk_utmi_is_prepared,
+ .recalc_rate = clk_utmi_recalc_rate,
+};
+
+static struct clk_hw * __init
+at91_clk_register_utmi(struct regmap *regmap_pmc, struct regmap *regmap_sfr,
+ const char *name, const char *parent_name)
+{
+ struct clk_utmi *utmi;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ utmi = kzalloc(sizeof(*utmi), GFP_KERNEL);
+ if (!utmi)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &utmi_ops;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+ init.flags = CLK_SET_RATE_GATE;
+
+ utmi->hw.init = &init;
+ utmi->regmap_pmc = regmap_pmc;
+ utmi->regmap_sfr = regmap_sfr;
+
+ hw = &utmi->hw;
+ ret = clk_hw_register(NULL, &utmi->hw);
+ if (ret) {
+ kfree(utmi);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
+
+static void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name = np->name;
+ struct regmap *regmap_pmc, *regmap_sfr;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap_pmc = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap_pmc))
+ return;
+
+ /*
+ * If the device supports different mainck rates, this value has to be
+ * set in the UTMI Clock Trimming register.
+ * - 9x5: mainck supports several rates but it is indicated that a
+ * 12 MHz is needed in case of USB.
+ * - sama5d3 and sama5d2: mainck supports several rates. Configuring
+ * the FREQ field of the UTMI Clock Trimming register is mandatory.
+ * - sama5d4: mainck is at 12 MHz.
+ *
+ * We only need to retrieve sama5d3 or sama5d2 sfr regmap.
+ */
+ regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d3-sfr");
+ if (IS_ERR(regmap_sfr)) {
+ regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+ if (IS_ERR(regmap_sfr))
+ regmap_sfr = NULL;
+ }
+
+ hw = at91_clk_register_utmi(regmap_pmc, regmap_sfr, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+ return;
+}
+CLK_OF_DECLARE(at91sam9x5_clk_utmi, "atmel,at91sam9x5-clk-utmi",
+ of_at91sam9x5_clk_utmi_setup);