v4.19.13 snapshot.
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
new file mode 100644
index 0000000..5270d55
--- /dev/null
+++ b/drivers/bluetooth/btintel.c
@@ -0,0 +1,734 @@
+/*
+ *
+ * Bluetooth support for Intel devices
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/regmap.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btintel.h"
+
+#define VERSION "0.1"
+
+#define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
+
+int btintel_check_bdaddr(struct hci_dev *hdev)
+{
+ struct hci_rp_read_bd_addr *bda;
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ int err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Reading Intel device address failed (%d)",
+ err);
+ return err;
+ }
+
+ if (skb->len != sizeof(*bda)) {
+ bt_dev_err(hdev, "Intel device address length mismatch");
+ kfree_skb(skb);
+ return -EIO;
+ }
+
+ bda = (struct hci_rp_read_bd_addr *)skb->data;
+
+ /* For some Intel based controllers, the default Bluetooth device
+ * address 00:03:19:9E:8B:00 can be found. These controllers are
+ * fully operational, but have the danger of duplicate addresses
+ * and that in turn can cause problems with Bluetooth operation.
+ */
+ if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) {
+ bt_dev_err(hdev, "Found Intel default device address (%pMR)",
+ &bda->bdaddr);
+ set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_check_bdaddr);
+
+int btintel_enter_mfg(struct hci_dev *hdev)
+{
+ static const u8 param[] = { 0x01, 0x00 };
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Entering manufacturer mode failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_enter_mfg);
+
+int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched)
+{
+ u8 param[] = { 0x00, 0x00 };
+ struct sk_buff *skb;
+
+ /* The 2nd command parameter specifies the manufacturing exit method:
+ * 0x00: Just disable the manufacturing mode (0x00).
+ * 0x01: Disable manufacturing mode and reset with patches deactivated.
+ * 0x02: Disable manufacturing mode and reset with patches activated.
+ */
+ if (reset)
+ param[1] |= patched ? 0x02 : 0x01;
+
+ skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Exiting manufacturer mode failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_exit_mfg);
+
+int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ int err;
+
+ skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Changing Intel device address failed (%d)",
+ err);
+ return err;
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_set_bdaddr);
+
+int btintel_set_diag(struct hci_dev *hdev, bool enable)
+{
+ struct sk_buff *skb;
+ u8 param[3];
+ int err;
+
+ if (enable) {
+ param[0] = 0x03;
+ param[1] = 0x03;
+ param[2] = 0x03;
+ } else {
+ param[0] = 0x00;
+ param[1] = 0x00;
+ param[2] = 0x00;
+ }
+
+ skb = __hci_cmd_sync(hdev, 0xfc43, 3, param, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ if (err == -ENODATA)
+ goto done;
+ bt_dev_err(hdev, "Changing Intel diagnostic mode failed (%d)",
+ err);
+ return err;
+ }
+ kfree_skb(skb);
+
+done:
+ btintel_set_event_mask(hdev, enable);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_set_diag);
+
+int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable)
+{
+ int err, ret;
+
+ err = btintel_enter_mfg(hdev);
+ if (err)
+ return err;
+
+ ret = btintel_set_diag(hdev, enable);
+
+ err = btintel_exit_mfg(hdev, false, false);
+ if (err)
+ return err;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(btintel_set_diag_mfg);
+
+void btintel_hw_error(struct hci_dev *hdev, u8 code)
+{
+ struct sk_buff *skb;
+ u8 type = 0x00;
+
+ bt_dev_err(hdev, "Hardware error 0x%2.2x", code);
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reset after hardware error failed (%ld)",
+ PTR_ERR(skb));
+ return;
+ }
+ kfree_skb(skb);
+
+ skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Retrieving Intel exception info failed (%ld)",
+ PTR_ERR(skb));
+ return;
+ }
+
+ if (skb->len != 13) {
+ bt_dev_err(hdev, "Exception info size mismatch");
+ kfree_skb(skb);
+ return;
+ }
+
+ bt_dev_err(hdev, "Exception info %s", (char *)(skb->data + 1));
+
+ kfree_skb(skb);
+}
+EXPORT_SYMBOL_GPL(btintel_hw_error);
+
+void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
+{
+ const char *variant;
+
+ switch (ver->fw_variant) {
+ case 0x06:
+ variant = "Bootloader";
+ break;
+ case 0x23:
+ variant = "Firmware";
+ break;
+ default:
+ return;
+ }
+
+ bt_dev_info(hdev, "%s revision %u.%u build %u week %u %u",
+ variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
+ ver->fw_build_num, ver->fw_build_ww,
+ 2000 + ver->fw_build_yy);
+}
+EXPORT_SYMBOL_GPL(btintel_version_info);
+
+int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
+ const void *param)
+{
+ while (plen > 0) {
+ struct sk_buff *skb;
+ u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen;
+
+ cmd_param[0] = fragment_type;
+ memcpy(cmd_param + 1, param, fragment_len);
+
+ skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1,
+ cmd_param, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ kfree_skb(skb);
+
+ plen -= fragment_len;
+ param += fragment_len;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_secure_send);
+
+int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name)
+{
+ const struct firmware *fw;
+ struct sk_buff *skb;
+ const u8 *fw_ptr;
+ int err;
+
+ err = request_firmware_direct(&fw, ddc_name, &hdev->dev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to load Intel DDC file %s (%d)",
+ ddc_name, err);
+ return err;
+ }
+
+ bt_dev_info(hdev, "Found Intel DDC parameters: %s", ddc_name);
+
+ fw_ptr = fw->data;
+
+ /* DDC file contains one or more DDC structure which has
+ * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2).
+ */
+ while (fw->size > fw_ptr - fw->data) {
+ u8 cmd_plen = fw_ptr[0] + sizeof(u8);
+
+ skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Failed to send Intel_Write_DDC (%ld)",
+ PTR_ERR(skb));
+ release_firmware(fw);
+ return PTR_ERR(skb);
+ }
+
+ fw_ptr += cmd_plen;
+ kfree_skb(skb);
+ }
+
+ release_firmware(fw);
+
+ bt_dev_info(hdev, "Applying Intel DDC parameters completed");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_load_ddc_config);
+
+int btintel_set_event_mask(struct hci_dev *hdev, bool debug)
+{
+ u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ struct sk_buff *skb;
+ int err;
+
+ if (debug)
+ mask[1] |= 0x62;
+
+ skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Setting Intel event mask failed (%d)", err);
+ return err;
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_set_event_mask);
+
+int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug)
+{
+ int err, ret;
+
+ err = btintel_enter_mfg(hdev);
+ if (err)
+ return err;
+
+ ret = btintel_set_event_mask(hdev, debug);
+
+ err = btintel_exit_mfg(hdev, false, false);
+ if (err)
+ return err;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(btintel_set_event_mask_mfg);
+
+int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver)
+{
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*ver)) {
+ bt_dev_err(hdev, "Intel version event size mismatch");
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ memcpy(ver, skb->data, sizeof(*ver));
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_read_version);
+
+/* ------- REGMAP IBT SUPPORT ------- */
+
+#define IBT_REG_MODE_8BIT 0x00
+#define IBT_REG_MODE_16BIT 0x01
+#define IBT_REG_MODE_32BIT 0x02
+
+struct regmap_ibt_context {
+ struct hci_dev *hdev;
+ __u16 op_write;
+ __u16 op_read;
+};
+
+struct ibt_cp_reg_access {
+ __le32 addr;
+ __u8 mode;
+ __u8 len;
+ __u8 data[0];
+} __packed;
+
+struct ibt_rp_reg_access {
+ __u8 status;
+ __le32 addr;
+ __u8 data[0];
+} __packed;
+
+static int regmap_ibt_read(void *context, const void *addr, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct regmap_ibt_context *ctx = context;
+ struct ibt_cp_reg_access cp;
+ struct ibt_rp_reg_access *rp;
+ struct sk_buff *skb;
+ int err = 0;
+
+ if (reg_size != sizeof(__le32))
+ return -EINVAL;
+
+ switch (val_size) {
+ case 1:
+ cp.mode = IBT_REG_MODE_8BIT;
+ break;
+ case 2:
+ cp.mode = IBT_REG_MODE_16BIT;
+ break;
+ case 4:
+ cp.mode = IBT_REG_MODE_32BIT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* regmap provides a little-endian formatted addr */
+ cp.addr = *(__le32 *)addr;
+ cp.len = val_size;
+
+ bt_dev_dbg(ctx->hdev, "Register (0x%x) read", le32_to_cpu(cp.addr));
+
+ skb = hci_cmd_sync(ctx->hdev, ctx->op_read, sizeof(cp), &cp,
+ HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error (%d)",
+ le32_to_cpu(cp.addr), err);
+ return err;
+ }
+
+ if (skb->len != sizeof(*rp) + val_size) {
+ bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad len",
+ le32_to_cpu(cp.addr));
+ err = -EINVAL;
+ goto done;
+ }
+
+ rp = (struct ibt_rp_reg_access *)skb->data;
+
+ if (rp->addr != cp.addr) {
+ bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad addr",
+ le32_to_cpu(rp->addr));
+ err = -EINVAL;
+ goto done;
+ }
+
+ memcpy(val, rp->data, val_size);
+
+done:
+ kfree_skb(skb);
+ return err;
+}
+
+static int regmap_ibt_gather_write(void *context,
+ const void *addr, size_t reg_size,
+ const void *val, size_t val_size)
+{
+ struct regmap_ibt_context *ctx = context;
+ struct ibt_cp_reg_access *cp;
+ struct sk_buff *skb;
+ int plen = sizeof(*cp) + val_size;
+ u8 mode;
+ int err = 0;
+
+ if (reg_size != sizeof(__le32))
+ return -EINVAL;
+
+ switch (val_size) {
+ case 1:
+ mode = IBT_REG_MODE_8BIT;
+ break;
+ case 2:
+ mode = IBT_REG_MODE_16BIT;
+ break;
+ case 4:
+ mode = IBT_REG_MODE_32BIT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ cp = kmalloc(plen, GFP_KERNEL);
+ if (!cp)
+ return -ENOMEM;
+
+ /* regmap provides a little-endian formatted addr/value */
+ cp->addr = *(__le32 *)addr;
+ cp->mode = mode;
+ cp->len = val_size;
+ memcpy(&cp->data, val, val_size);
+
+ bt_dev_dbg(ctx->hdev, "Register (0x%x) write", le32_to_cpu(cp->addr));
+
+ skb = hci_cmd_sync(ctx->hdev, ctx->op_write, plen, cp, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(ctx->hdev, "regmap: Register (0x%x) write error (%d)",
+ le32_to_cpu(cp->addr), err);
+ goto done;
+ }
+ kfree_skb(skb);
+
+done:
+ kfree(cp);
+ return err;
+}
+
+static int regmap_ibt_write(void *context, const void *data, size_t count)
+{
+ /* data contains register+value, since we only support 32bit addr,
+ * minimum data size is 4 bytes.
+ */
+ if (WARN_ONCE(count < 4, "Invalid register access"))
+ return -EINVAL;
+
+ return regmap_ibt_gather_write(context, data, 4, data + 4, count - 4);
+}
+
+static void regmap_ibt_free_context(void *context)
+{
+ kfree(context);
+}
+
+static struct regmap_bus regmap_ibt = {
+ .read = regmap_ibt_read,
+ .write = regmap_ibt_write,
+ .gather_write = regmap_ibt_gather_write,
+ .free_context = regmap_ibt_free_context,
+ .reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
+ .val_format_endian_default = REGMAP_ENDIAN_LITTLE,
+};
+
+/* Config is the same for all register regions */
+static const struct regmap_config regmap_ibt_cfg = {
+ .name = "btintel_regmap",
+ .reg_bits = 32,
+ .val_bits = 32,
+};
+
+struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
+ u16 opcode_write)
+{
+ struct regmap_ibt_context *ctx;
+
+ bt_dev_info(hdev, "regmap: Init R%x-W%x region", opcode_read,
+ opcode_write);
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return ERR_PTR(-ENOMEM);
+
+ ctx->op_read = opcode_read;
+ ctx->op_write = opcode_write;
+ ctx->hdev = hdev;
+
+ return regmap_init(&hdev->dev, ®map_ibt, ctx, ®map_ibt_cfg);
+}
+EXPORT_SYMBOL_GPL(btintel_regmap_init);
+
+int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param)
+{
+ struct intel_reset params = { 0x00, 0x01, 0x00, 0x01, 0x00000000 };
+ struct sk_buff *skb;
+
+ params.boot_param = cpu_to_le32(boot_param);
+
+ skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params), ¶ms,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Failed to send Intel Reset command");
+ return PTR_ERR(skb);
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_send_intel_reset);
+
+int btintel_read_boot_params(struct hci_dev *hdev,
+ struct intel_boot_params *params)
+{
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*params)) {
+ bt_dev_err(hdev, "Intel boot parameters size mismatch");
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ memcpy(params, skb->data, sizeof(*params));
+
+ kfree_skb(skb);
+
+ if (params->status) {
+ bt_dev_err(hdev, "Intel boot parameters command failed (%02x)",
+ params->status);
+ return -bt_to_errno(params->status);
+ }
+
+ bt_dev_info(hdev, "Device revision is %u",
+ le16_to_cpu(params->dev_revid));
+
+ bt_dev_info(hdev, "Secure boot is %s",
+ params->secure_boot ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "OTP lock is %s",
+ params->otp_lock ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "API lock is %s",
+ params->api_lock ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "Debug lock is %s",
+ params->debug_lock ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
+ params->min_fw_build_nn, params->min_fw_build_cw,
+ 2000 + params->min_fw_build_yy);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_read_boot_params);
+
+int btintel_download_firmware(struct hci_dev *hdev, const struct firmware *fw,
+ u32 *boot_param)
+{
+ int err;
+ const u8 *fw_ptr;
+ u32 frag_len;
+
+ /* Start the firmware download transaction with the Init fragment
+ * represented by the 128 bytes of CSS header.
+ */
+ err = btintel_secure_send(hdev, 0x00, 128, fw->data);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
+ goto done;
+ }
+
+ /* Send the 256 bytes of public key information from the firmware
+ * as the PKey fragment.
+ */
+ err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err);
+ goto done;
+ }
+
+ /* Send the 256 bytes of signature information from the firmware
+ * as the Sign fragment.
+ */
+ err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send firmware signature (%d)", err);
+ goto done;
+ }
+
+ fw_ptr = fw->data + 644;
+ frag_len = 0;
+
+ while (fw_ptr - fw->data < fw->size) {
+ struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
+
+ /* Each SKU has a different reset parameter to use in the
+ * HCI_Intel_Reset command and it is embedded in the firmware
+ * data. So, instead of using static value per SKU, check
+ * the firmware data and save it for later use.
+ */
+ if (le16_to_cpu(cmd->opcode) == 0xfc0e) {
+ /* The boot parameter is the first 32-bit value
+ * and rest of 3 octets are reserved.
+ */
+ *boot_param = get_unaligned_le32(fw_ptr + sizeof(*cmd));
+
+ bt_dev_dbg(hdev, "boot_param=0x%x", *boot_param);
+ }
+
+ frag_len += sizeof(*cmd) + cmd->plen;
+
+ /* The parameter length of the secure send command requires
+ * a 4 byte alignment. It happens so that the firmware file
+ * contains proper Intel_NOP commands to align the fragments
+ * as needed.
+ *
+ * Send set of commands with 4 byte alignment from the
+ * firmware data buffer as a single Data fragement.
+ */
+ if (!(frag_len % 4)) {
+ err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
+ if (err < 0) {
+ bt_dev_err(hdev,
+ "Failed to send firmware data (%d)",
+ err);
+ goto done;
+ }
+
+ fw_ptr += frag_len;
+ frag_len = 0;
+ }
+ }
+
+done:
+ return err;
+}
+EXPORT_SYMBOL_GPL(btintel_download_firmware);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("intel/ibt-11-5.sfi");
+MODULE_FIRMWARE("intel/ibt-11-5.ddc");
+MODULE_FIRMWARE("intel/ibt-12-16.sfi");
+MODULE_FIRMWARE("intel/ibt-12-16.ddc");