v4.19.13 snapshot.
diff --git a/drivers/acpi/acpica/psobject.c b/drivers/acpi/acpica/psobject.c
new file mode 100644
index 0000000..3138e7a
--- /dev/null
+++ b/drivers/acpi/acpica/psobject.c
@@ -0,0 +1,732 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/******************************************************************************
+ *
+ * Module Name: psobject - Support for parse objects
+ *
+ * Copyright (C) 2000 - 2018, Intel Corp.
+ *
+ *****************************************************************************/
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acparser.h"
+#include "amlcode.h"
+#include "acconvert.h"
+#include "acnamesp.h"
+
+#define _COMPONENT ACPI_PARSER
+ACPI_MODULE_NAME("psobject")
+
+/* Local prototypes */
+static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_get_aml_opcode
+ *
+ * PARAMETERS: walk_state - Current state
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Extract the next AML opcode from the input stream.
+ *
+ ******************************************************************************/
+
+static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
+{
+ ACPI_ERROR_ONLY(u32 aml_offset);
+
+ ACPI_FUNCTION_TRACE_PTR(ps_get_aml_opcode, walk_state);
+
+ walk_state->aml = walk_state->parser_state.aml;
+ walk_state->opcode = acpi_ps_peek_opcode(&(walk_state->parser_state));
+
+ /*
+ * First cut to determine what we have found:
+ * 1) A valid AML opcode
+ * 2) A name string
+ * 3) An unknown/invalid opcode
+ */
+ walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
+
+ switch (walk_state->op_info->class) {
+ case AML_CLASS_ASCII:
+ case AML_CLASS_PREFIX:
+ /*
+ * Starts with a valid prefix or ASCII char, this is a name
+ * string. Convert the bare name string to a namepath.
+ */
+ walk_state->opcode = AML_INT_NAMEPATH_OP;
+ walk_state->arg_types = ARGP_NAMESTRING;
+ break;
+
+ case AML_CLASS_UNKNOWN:
+
+ /* The opcode is unrecognized. Complain and skip unknown opcodes */
+
+ if (walk_state->pass_number == 2) {
+ ACPI_ERROR_ONLY(aml_offset =
+ (u32)ACPI_PTR_DIFF(walk_state->aml,
+ walk_state->
+ parser_state.
+ aml_start));
+
+ ACPI_ERROR((AE_INFO,
+ "Unknown opcode 0x%.2X at table offset 0x%.4X, ignoring",
+ walk_state->opcode,
+ (u32)(aml_offset +
+ sizeof(struct acpi_table_header))));
+
+ ACPI_DUMP_BUFFER((walk_state->parser_state.aml - 16),
+ 48);
+
+#ifdef ACPI_ASL_COMPILER
+ /*
+ * This is executed for the disassembler only. Output goes
+ * to the disassembled ASL output file.
+ */
+ acpi_os_printf
+ ("/*\nError: Unknown opcode 0x%.2X at table offset 0x%.4X, context:\n",
+ walk_state->opcode,
+ (u32)(aml_offset +
+ sizeof(struct acpi_table_header)));
+
+ ACPI_ERROR((AE_INFO,
+ "Aborting disassembly, AML byte code is corrupt"));
+
+ /* Dump the context surrounding the invalid opcode */
+
+ acpi_ut_dump_buffer(((u8 *)walk_state->parser_state.
+ aml - 16), 48, DB_BYTE_DISPLAY,
+ (aml_offset +
+ sizeof(struct acpi_table_header) -
+ 16));
+ acpi_os_printf(" */\n");
+
+ /*
+ * Just abort the disassembly, cannot continue because the
+ * parser is essentially lost. The disassembler can then
+ * randomly fail because an ill-constructed parse tree
+ * can result.
+ */
+ return_ACPI_STATUS(AE_AML_BAD_OPCODE);
+#endif
+ }
+
+ /* Increment past one-byte or two-byte opcode */
+
+ walk_state->parser_state.aml++;
+ if (walk_state->opcode > 0xFF) { /* Can only happen if first byte is 0x5B */
+ walk_state->parser_state.aml++;
+ }
+
+ return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+
+ default:
+
+ /* Found opcode info, this is a normal opcode */
+
+ walk_state->parser_state.aml +=
+ acpi_ps_get_opcode_size(walk_state->opcode);
+ walk_state->arg_types = walk_state->op_info->parse_args;
+ break;
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_build_named_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * aml_op_start - Begin of named Op in AML
+ * unnamed_op - Early Op (not a named Op)
+ * op - Returned Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Parse a named Op
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
+ u8 *aml_op_start,
+ union acpi_parse_object *unnamed_op,
+ union acpi_parse_object **op)
+{
+ acpi_status status = AE_OK;
+ union acpi_parse_object *arg = NULL;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_build_named_op, walk_state);
+
+ unnamed_op->common.value.arg = NULL;
+ unnamed_op->common.arg_list_length = 0;
+ unnamed_op->common.aml_opcode = walk_state->opcode;
+
+ /*
+ * Get and append arguments until we find the node that contains
+ * the name (the type ARGP_NAME).
+ */
+ while (GET_CURRENT_ARG_TYPE(walk_state->arg_types) &&
+ (GET_CURRENT_ARG_TYPE(walk_state->arg_types) != ARGP_NAME)) {
+ ASL_CV_CAPTURE_COMMENTS(walk_state);
+ status =
+ acpi_ps_get_next_arg(walk_state,
+ &(walk_state->parser_state),
+ GET_CURRENT_ARG_TYPE(walk_state->
+ arg_types), &arg);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ acpi_ps_append_arg(unnamed_op, arg);
+ INCREMENT_ARG_LIST(walk_state->arg_types);
+ }
+
+ /* are there any inline comments associated with the name_seg?? If so, save this. */
+
+ ASL_CV_CAPTURE_COMMENTS(walk_state);
+
+#ifdef ACPI_ASL_COMPILER
+ if (acpi_gbl_current_inline_comment != NULL) {
+ unnamed_op->common.name_comment =
+ acpi_gbl_current_inline_comment;
+ acpi_gbl_current_inline_comment = NULL;
+ }
+#endif
+
+ /*
+ * Make sure that we found a NAME and didn't run out of arguments
+ */
+ if (!GET_CURRENT_ARG_TYPE(walk_state->arg_types)) {
+ return_ACPI_STATUS(AE_AML_NO_OPERAND);
+ }
+
+ /* We know that this arg is a name, move to next arg */
+
+ INCREMENT_ARG_LIST(walk_state->arg_types);
+
+ /*
+ * Find the object. This will either insert the object into
+ * the namespace or simply look it up
+ */
+ walk_state->op = NULL;
+
+ status = walk_state->descending_callback(walk_state, op);
+ if (ACPI_FAILURE(status)) {
+ if (status != AE_CTRL_TERMINATE) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During name lookup/catalog"));
+ }
+ return_ACPI_STATUS(status);
+ }
+
+ if (!*op) {
+ return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+ }
+
+ status = acpi_ps_next_parse_state(walk_state, *op, status);
+ if (ACPI_FAILURE(status)) {
+ if (status == AE_CTRL_PENDING) {
+ status = AE_CTRL_PARSE_PENDING;
+ }
+ return_ACPI_STATUS(status);
+ }
+
+ acpi_ps_append_arg(*op, unnamed_op->common.value.arg);
+
+#ifdef ACPI_ASL_COMPILER
+
+ /* save any comments that might be associated with unnamed_op. */
+
+ (*op)->common.inline_comment = unnamed_op->common.inline_comment;
+ (*op)->common.end_node_comment = unnamed_op->common.end_node_comment;
+ (*op)->common.close_brace_comment =
+ unnamed_op->common.close_brace_comment;
+ (*op)->common.name_comment = unnamed_op->common.name_comment;
+ (*op)->common.comment_list = unnamed_op->common.comment_list;
+ (*op)->common.end_blk_comment = unnamed_op->common.end_blk_comment;
+ (*op)->common.cv_filename = unnamed_op->common.cv_filename;
+ (*op)->common.cv_parent_filename =
+ unnamed_op->common.cv_parent_filename;
+ (*op)->named.aml = unnamed_op->common.aml;
+
+ unnamed_op->common.inline_comment = NULL;
+ unnamed_op->common.end_node_comment = NULL;
+ unnamed_op->common.close_brace_comment = NULL;
+ unnamed_op->common.name_comment = NULL;
+ unnamed_op->common.comment_list = NULL;
+ unnamed_op->common.end_blk_comment = NULL;
+#endif
+
+ if ((*op)->common.aml_opcode == AML_REGION_OP ||
+ (*op)->common.aml_opcode == AML_DATA_REGION_OP) {
+ /*
+ * Defer final parsing of an operation_region body, because we don't
+ * have enough info in the first pass to parse it correctly (i.e.,
+ * there may be method calls within the term_arg elements of the body.)
+ *
+ * However, we must continue parsing because the opregion is not a
+ * standalone package -- we don't know where the end is at this point.
+ *
+ * (Length is unknown until parse of the body complete)
+ */
+ (*op)->named.data = aml_op_start;
+ (*op)->named.length = 0;
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_create_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * aml_op_start - Op start in AML
+ * new_op - Returned Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Get Op from AML
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ps_create_op(struct acpi_walk_state *walk_state,
+ u8 *aml_op_start, union acpi_parse_object **new_op)
+{
+ acpi_status status = AE_OK;
+ union acpi_parse_object *op;
+ union acpi_parse_object *named_op = NULL;
+ union acpi_parse_object *parent_scope;
+ u8 argument_count;
+ const struct acpi_opcode_info *op_info;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_create_op, walk_state);
+
+ status = acpi_ps_get_aml_opcode(walk_state);
+ if (status == AE_CTRL_PARSE_CONTINUE) {
+ return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+ }
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Create Op structure and append to parent's argument list */
+
+ walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
+ op = acpi_ps_alloc_op(walk_state->opcode, aml_op_start);
+ if (!op) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ if (walk_state->op_info->flags & AML_NAMED) {
+ status =
+ acpi_ps_build_named_op(walk_state, aml_op_start, op,
+ &named_op);
+ acpi_ps_free_op(op);
+
+#ifdef ACPI_ASL_COMPILER
+ if (acpi_gbl_disasm_flag
+ && walk_state->opcode == AML_EXTERNAL_OP
+ && status == AE_NOT_FOUND) {
+ /*
+ * If parsing of AML_EXTERNAL_OP's name path fails, then skip
+ * past this opcode and keep parsing. This is a much better
+ * alternative than to abort the entire disassembler. At this
+ * point, the parser_state is at the end of the namepath of the
+ * external declaration opcode. Setting walk_state->Aml to
+ * walk_state->parser_state.Aml + 2 moves increments the
+ * walk_state->Aml past the object type and the paramcount of the
+ * external opcode.
+ */
+ walk_state->aml = walk_state->parser_state.aml + 2;
+ walk_state->parser_state.aml = walk_state->aml;
+ return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+ }
+#endif
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ *new_op = named_op;
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ /* Not a named opcode, just allocate Op and append to parent */
+
+ if (walk_state->op_info->flags & AML_CREATE) {
+ /*
+ * Backup to beginning of create_XXXfield declaration
+ * body_length is unknown until we parse the body
+ */
+ op->named.data = aml_op_start;
+ op->named.length = 0;
+ }
+
+ if (walk_state->opcode == AML_BANK_FIELD_OP) {
+ /*
+ * Backup to beginning of bank_field declaration
+ * body_length is unknown until we parse the body
+ */
+ op->named.data = aml_op_start;
+ op->named.length = 0;
+ }
+
+ parent_scope = acpi_ps_get_parent_scope(&(walk_state->parser_state));
+ acpi_ps_append_arg(parent_scope, op);
+
+ if (parent_scope) {
+ op_info =
+ acpi_ps_get_opcode_info(parent_scope->common.aml_opcode);
+ if (op_info->flags & AML_HAS_TARGET) {
+ argument_count =
+ acpi_ps_get_argument_count(op_info->type);
+ if (parent_scope->common.arg_list_length >
+ argument_count) {
+ op->common.flags |= ACPI_PARSEOP_TARGET;
+ }
+ }
+
+ /*
+ * Special case for both Increment() and Decrement(), where
+ * the lone argument is both a source and a target.
+ */
+ else if ((parent_scope->common.aml_opcode == AML_INCREMENT_OP)
+ || (parent_scope->common.aml_opcode ==
+ AML_DECREMENT_OP)) {
+ op->common.flags |= ACPI_PARSEOP_TARGET;
+ }
+ }
+
+ if (walk_state->descending_callback != NULL) {
+ /*
+ * Find the object. This will either insert the object into
+ * the namespace or simply look it up
+ */
+ walk_state->op = *new_op = op;
+
+ status = walk_state->descending_callback(walk_state, &op);
+ status = acpi_ps_next_parse_state(walk_state, op, status);
+ if (status == AE_CTRL_PENDING) {
+ status = AE_CTRL_PARSE_PENDING;
+ }
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_complete_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * op - Returned Op
+ * status - Parse status before complete Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Complete Op
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ps_complete_op(struct acpi_walk_state *walk_state,
+ union acpi_parse_object **op, acpi_status status)
+{
+ acpi_status status2;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_complete_op, walk_state);
+
+ /*
+ * Finished one argument of the containing scope
+ */
+ walk_state->parser_state.scope->parse_scope.arg_count--;
+
+ /* Close this Op (will result in parse subtree deletion) */
+
+ status2 = acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+
+ *op = NULL;
+
+ switch (status) {
+ case AE_OK:
+
+ break;
+
+ case AE_CTRL_TRANSFER:
+
+ /* We are about to transfer to a called method */
+
+ walk_state->prev_op = NULL;
+ walk_state->prev_arg_types = walk_state->arg_types;
+ return_ACPI_STATUS(status);
+
+ case AE_CTRL_END:
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ if (*op) {
+ walk_state->op = *op;
+ walk_state->op_info =
+ acpi_ps_get_opcode_info((*op)->common.aml_opcode);
+ walk_state->opcode = (*op)->common.aml_opcode;
+
+ status = walk_state->ascending_callback(walk_state);
+ status =
+ acpi_ps_next_parse_state(walk_state, *op, status);
+
+ status2 = acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ }
+
+ status = AE_OK;
+ break;
+
+ case AE_CTRL_BREAK:
+ case AE_CTRL_CONTINUE:
+
+ /* Pop off scopes until we find the While */
+
+ while (!(*op) || ((*op)->common.aml_opcode != AML_WHILE_OP)) {
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+ }
+
+ /* Close this iteration of the While loop */
+
+ walk_state->op = *op;
+ walk_state->op_info =
+ acpi_ps_get_opcode_info((*op)->common.aml_opcode);
+ walk_state->opcode = (*op)->common.aml_opcode;
+
+ status = walk_state->ascending_callback(walk_state);
+ status = acpi_ps_next_parse_state(walk_state, *op, status);
+
+ status2 = acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+
+ status = AE_OK;
+ break;
+
+ case AE_CTRL_TERMINATE:
+
+ /* Clean up */
+ do {
+ if (*op) {
+ status2 =
+ acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+
+ acpi_ut_delete_generic_state
+ (acpi_ut_pop_generic_state
+ (&walk_state->control_state));
+ }
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ } while (*op);
+
+ return_ACPI_STATUS(AE_OK);
+
+ default: /* All other non-AE_OK status */
+
+ do {
+ if (*op) {
+ /*
+ * These Opcodes need to be removed from the namespace because they
+ * get created even if these opcodes cannot be created due to
+ * errors.
+ */
+ if (((*op)->common.aml_opcode == AML_REGION_OP)
+ || ((*op)->common.aml_opcode ==
+ AML_DATA_REGION_OP)) {
+ acpi_ns_delete_children((*op)->common.
+ node);
+ acpi_ns_remove_node((*op)->common.node);
+ (*op)->common.node = NULL;
+ acpi_ps_delete_parse_tree(*op);
+ }
+
+ status2 =
+ acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ }
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ } while (*op);
+
+#if 0
+ /*
+ * TBD: Cleanup parse ops on error
+ */
+ if (*op == NULL) {
+ acpi_ps_pop_scope(parser_state, op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+ }
+#endif
+ walk_state->prev_op = NULL;
+ walk_state->prev_arg_types = walk_state->arg_types;
+
+ if (walk_state->parse_flags & ACPI_PARSE_MODULE_LEVEL) {
+ /*
+ * There was something that went wrong while executing code at the
+ * module-level. We need to skip parsing whatever caused the
+ * error and keep going. One runtime error during the table load
+ * should not cause the entire table to not be loaded. This is
+ * because there could be correct AML beyond the parts that caused
+ * the runtime error.
+ */
+ ACPI_ERROR((AE_INFO,
+ "Ignore error and continue table load"));
+ return_ACPI_STATUS(AE_OK);
+ }
+ return_ACPI_STATUS(status);
+ }
+
+ /* This scope complete? */
+
+ if (acpi_ps_has_completed_scope(&(walk_state->parser_state))) {
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Popped scope, Op=%p\n", *op));
+ } else {
+ *op = NULL;
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_complete_final_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * op - Current Op
+ * status - Current parse status before complete last
+ * Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Complete last Op.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
+ union acpi_parse_object *op, acpi_status status)
+{
+ acpi_status status2;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_complete_final_op, walk_state);
+
+ /*
+ * Complete the last Op (if not completed), and clear the scope stack.
+ * It is easily possible to end an AML "package" with an unbounded number
+ * of open scopes (such as when several ASL blocks are closed with
+ * sequential closing braces). We want to terminate each one cleanly.
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "AML package complete at Op %p\n",
+ op));
+ do {
+ if (op) {
+ if (walk_state->ascending_callback != NULL) {
+ walk_state->op = op;
+ walk_state->op_info =
+ acpi_ps_get_opcode_info(op->common.
+ aml_opcode);
+ walk_state->opcode = op->common.aml_opcode;
+
+ status =
+ walk_state->ascending_callback(walk_state);
+ status =
+ acpi_ps_next_parse_state(walk_state, op,
+ status);
+ if (status == AE_CTRL_PENDING) {
+ status =
+ acpi_ps_complete_op(walk_state, &op,
+ AE_OK);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ if (status == AE_CTRL_TERMINATE) {
+ status = AE_OK;
+
+ /* Clean up */
+ do {
+ if (op) {
+ status2 =
+ acpi_ps_complete_this_op
+ (walk_state, op);
+ if (ACPI_FAILURE
+ (status2)) {
+ return_ACPI_STATUS
+ (status2);
+ }
+ }
+
+ acpi_ps_pop_scope(&
+ (walk_state->
+ parser_state),
+ &op,
+ &walk_state->
+ arg_types,
+ &walk_state->
+ arg_count);
+
+ } while (op);
+
+ return_ACPI_STATUS(status);
+ }
+
+ else if (ACPI_FAILURE(status)) {
+
+ /* First error is most important */
+
+ (void)
+ acpi_ps_complete_this_op(walk_state,
+ op);
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ status2 = acpi_ps_complete_this_op(walk_state, op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ }
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), &op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ } while (op);
+
+ return_ACPI_STATUS(status);
+}