v4.19.13 snapshot.
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
new file mode 100644
index 0000000..f5b7f1b
--- /dev/null
+++ b/arch/x86/lib/delay.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Precise Delay Loops for i386
+ *
+ * Copyright (C) 1993 Linus Torvalds
+ * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ * Copyright (C) 2008 Jiri Hladky <hladky _dot_ jiri _at_ gmail _dot_ com>
+ *
+ * The __delay function must _NOT_ be inlined as its execution time
+ * depends wildly on alignment on many x86 processors. The additional
+ * jump magic is needed to get the timing stable on all the CPU's
+ * we have to worry about.
+ */
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/timex.h>
+#include <linux/preempt.h>
+#include <linux/delay.h>
+
+#include <asm/processor.h>
+#include <asm/delay.h>
+#include <asm/timer.h>
+#include <asm/mwait.h>
+
+#ifdef CONFIG_SMP
+# include <asm/smp.h>
+#endif
+
+/* simple loop based delay: */
+static void delay_loop(unsigned long loops)
+{
+ asm volatile(
+ " test %0,%0 \n"
+ " jz 3f \n"
+ " jmp 1f \n"
+
+ ".align 16 \n"
+ "1: jmp 2f \n"
+
+ ".align 16 \n"
+ "2: dec %0 \n"
+ " jnz 2b \n"
+ "3: dec %0 \n"
+
+ : /* we don't need output */
+ :"a" (loops)
+ );
+}
+
+/* TSC based delay: */
+static void delay_tsc(unsigned long __loops)
+{
+ u64 bclock, now, loops = __loops;
+ int cpu;
+
+ preempt_disable();
+ cpu = smp_processor_id();
+ bclock = rdtsc_ordered();
+ for (;;) {
+ now = rdtsc_ordered();
+ if ((now - bclock) >= loops)
+ break;
+
+ /* Allow RT tasks to run */
+ preempt_enable();
+ rep_nop();
+ preempt_disable();
+
+ /*
+ * It is possible that we moved to another CPU, and
+ * since TSC's are per-cpu we need to calculate
+ * that. The delay must guarantee that we wait "at
+ * least" the amount of time. Being moved to another
+ * CPU could make the wait longer but we just need to
+ * make sure we waited long enough. Rebalance the
+ * counter for this CPU.
+ */
+ if (unlikely(cpu != smp_processor_id())) {
+ loops -= (now - bclock);
+ cpu = smp_processor_id();
+ bclock = rdtsc_ordered();
+ }
+ }
+ preempt_enable();
+}
+
+/*
+ * On some AMD platforms, MWAITX has a configurable 32-bit timer, that
+ * counts with TSC frequency. The input value is the loop of the
+ * counter, it will exit when the timer expires.
+ */
+static void delay_mwaitx(unsigned long __loops)
+{
+ u64 start, end, delay, loops = __loops;
+
+ /*
+ * Timer value of 0 causes MWAITX to wait indefinitely, unless there
+ * is a store on the memory monitored by MONITORX.
+ */
+ if (loops == 0)
+ return;
+
+ start = rdtsc_ordered();
+
+ for (;;) {
+ delay = min_t(u64, MWAITX_MAX_LOOPS, loops);
+
+ /*
+ * Use cpu_tss_rw as a cacheline-aligned, seldomly
+ * accessed per-cpu variable as the monitor target.
+ */
+ __monitorx(raw_cpu_ptr(&cpu_tss_rw), 0, 0);
+
+ /*
+ * AMD, like Intel, supports the EAX hint and EAX=0xf
+ * means, do not enter any deep C-state and we use it
+ * here in delay() to minimize wakeup latency.
+ */
+ __mwaitx(MWAITX_DISABLE_CSTATES, delay, MWAITX_ECX_TIMER_ENABLE);
+
+ end = rdtsc_ordered();
+
+ if (loops <= end - start)
+ break;
+
+ loops -= end - start;
+
+ start = end;
+ }
+}
+
+/*
+ * Since we calibrate only once at boot, this
+ * function should be set once at boot and not changed
+ */
+static void (*delay_fn)(unsigned long) = delay_loop;
+
+void use_tsc_delay(void)
+{
+ if (delay_fn == delay_loop)
+ delay_fn = delay_tsc;
+}
+
+void use_mwaitx_delay(void)
+{
+ delay_fn = delay_mwaitx;
+}
+
+int read_current_timer(unsigned long *timer_val)
+{
+ if (delay_fn == delay_tsc) {
+ *timer_val = rdtsc();
+ return 0;
+ }
+ return -1;
+}
+
+void __delay(unsigned long loops)
+{
+ delay_fn(loops);
+}
+EXPORT_SYMBOL(__delay);
+
+void __const_udelay(unsigned long xloops)
+{
+ unsigned long lpj = this_cpu_read(cpu_info.loops_per_jiffy) ? : loops_per_jiffy;
+ int d0;
+
+ xloops *= 4;
+ asm("mull %%edx"
+ :"=d" (xloops), "=&a" (d0)
+ :"1" (xloops), "0" (lpj * (HZ / 4)));
+
+ __delay(++xloops);
+}
+EXPORT_SYMBOL(__const_udelay);
+
+void __udelay(unsigned long usecs)
+{
+ __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long nsecs)
+{
+ __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
+}
+EXPORT_SYMBOL(__ndelay);