v4.19.13 snapshot.
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
new file mode 100644
index 0000000..736348e
--- /dev/null
+++ b/arch/x86/kernel/quirks.c
@@ -0,0 +1,676 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file contains work-arounds for x86 and x86_64 platform bugs.
+ */
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+
+#include <asm/hpet.h>
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
+
+static void quirk_intel_irqbalance(struct pci_dev *dev)
+{
+ u8 config;
+ u16 word;
+
+ /* BIOS may enable hardware IRQ balancing for
+ * E7520/E7320/E7525(revision ID 0x9 and below)
+ * based platforms.
+ * Disable SW irqbalance/affinity on those platforms.
+ */
+ if (dev->revision > 0x9)
+ return;
+
+ /* enable access to config space*/
+ pci_read_config_byte(dev, 0xf4, &config);
+ pci_write_config_byte(dev, 0xf4, config|0x2);
+
+ /*
+ * read xTPR register. We may not have a pci_dev for device 8
+ * because it might be hidden until the above write.
+ */
+ pci_bus_read_config_word(dev->bus, PCI_DEVFN(8, 0), 0x4c, &word);
+
+ if (!(word & (1 << 13))) {
+ dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
+ "disabling irq balancing and affinity\n");
+ noirqdebug_setup("");
+#ifdef CONFIG_PROC_FS
+ no_irq_affinity = 1;
+#endif
+ }
+
+ /* put back the original value for config space*/
+ if (!(config & 0x2))
+ pci_write_config_byte(dev, 0xf4, config);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH,
+ quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH,
+ quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH,
+ quirk_intel_irqbalance);
+#endif
+
+#if defined(CONFIG_HPET_TIMER)
+unsigned long force_hpet_address;
+
+static enum {
+ NONE_FORCE_HPET_RESUME,
+ OLD_ICH_FORCE_HPET_RESUME,
+ ICH_FORCE_HPET_RESUME,
+ VT8237_FORCE_HPET_RESUME,
+ NVIDIA_FORCE_HPET_RESUME,
+ ATI_FORCE_HPET_RESUME,
+} force_hpet_resume_type;
+
+static void __iomem *rcba_base;
+
+static void ich_force_hpet_resume(void)
+{
+ u32 val;
+
+ if (!force_hpet_address)
+ return;
+
+ BUG_ON(rcba_base == NULL);
+
+ /* read the Function Disable register, dword mode only */
+ val = readl(rcba_base + 0x3404);
+ if (!(val & 0x80)) {
+ /* HPET disabled in HPTC. Trying to enable */
+ writel(val | 0x80, rcba_base + 0x3404);
+ }
+
+ val = readl(rcba_base + 0x3404);
+ if (!(val & 0x80))
+ BUG();
+ else
+ printk(KERN_DEBUG "Force enabled HPET at resume\n");
+
+ return;
+}
+
+static void ich_force_enable_hpet(struct pci_dev *dev)
+{
+ u32 val;
+ u32 uninitialized_var(rcba);
+ int err = 0;
+
+ if (hpet_address || force_hpet_address)
+ return;
+
+ pci_read_config_dword(dev, 0xF0, &rcba);
+ rcba &= 0xFFFFC000;
+ if (rcba == 0) {
+ dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
+ "cannot force enable HPET\n");
+ return;
+ }
+
+ /* use bits 31:14, 16 kB aligned */
+ rcba_base = ioremap_nocache(rcba, 0x4000);
+ if (rcba_base == NULL) {
+ dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
+ "cannot force enable HPET\n");
+ return;
+ }
+
+ /* read the Function Disable register, dword mode only */
+ val = readl(rcba_base + 0x3404);
+
+ if (val & 0x80) {
+ /* HPET is enabled in HPTC. Just not reported by BIOS */
+ val = val & 0x3;
+ force_hpet_address = 0xFED00000 | (val << 12);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
+ iounmap(rcba_base);
+ return;
+ }
+
+ /* HPET disabled in HPTC. Trying to enable */
+ writel(val | 0x80, rcba_base + 0x3404);
+
+ val = readl(rcba_base + 0x3404);
+ if (!(val & 0x80)) {
+ err = 1;
+ } else {
+ val = val & 0x3;
+ force_hpet_address = 0xFED00000 | (val << 12);
+ }
+
+ if (err) {
+ force_hpet_address = 0;
+ iounmap(rcba_base);
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "Failed to force enable HPET\n");
+ } else {
+ force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
+ ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
+ ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
+ ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
+ ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,
+ ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
+ ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
+ ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4,
+ ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
+ ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3a16, /* ICH10 */
+ ich_force_enable_hpet);
+
+static struct pci_dev *cached_dev;
+
+static void hpet_print_force_info(void)
+{
+ printk(KERN_INFO "HPET not enabled in BIOS. "
+ "You might try hpet=force boot option\n");
+}
+
+static void old_ich_force_hpet_resume(void)
+{
+ u32 val;
+ u32 uninitialized_var(gen_cntl);
+
+ if (!force_hpet_address || !cached_dev)
+ return;
+
+ pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
+ gen_cntl &= (~(0x7 << 15));
+ gen_cntl |= (0x4 << 15);
+
+ pci_write_config_dword(cached_dev, 0xD0, gen_cntl);
+ pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
+ val = gen_cntl >> 15;
+ val &= 0x7;
+ if (val == 0x4)
+ printk(KERN_DEBUG "Force enabled HPET at resume\n");
+ else
+ BUG();
+}
+
+static void old_ich_force_enable_hpet(struct pci_dev *dev)
+{
+ u32 val;
+ u32 uninitialized_var(gen_cntl);
+
+ if (hpet_address || force_hpet_address)
+ return;
+
+ pci_read_config_dword(dev, 0xD0, &gen_cntl);
+ /*
+ * Bit 17 is HPET enable bit.
+ * Bit 16:15 control the HPET base address.
+ */
+ val = gen_cntl >> 15;
+ val &= 0x7;
+ if (val & 0x4) {
+ val &= 0x3;
+ force_hpet_address = 0xFED00000 | (val << 12);
+ dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+ force_hpet_address);
+ return;
+ }
+
+ /*
+ * HPET is disabled. Trying enabling at FED00000 and check
+ * whether it sticks
+ */
+ gen_cntl &= (~(0x7 << 15));
+ gen_cntl |= (0x4 << 15);
+ pci_write_config_dword(dev, 0xD0, gen_cntl);
+
+ pci_read_config_dword(dev, 0xD0, &gen_cntl);
+
+ val = gen_cntl >> 15;
+ val &= 0x7;
+ if (val & 0x4) {
+ /* HPET is enabled in HPTC. Just not reported by BIOS */
+ val &= 0x3;
+ force_hpet_address = 0xFED00000 | (val << 12);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
+ cached_dev = dev;
+ force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
+ return;
+ }
+
+ dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
+}
+
+/*
+ * Undocumented chipset features. Make sure that the user enforced
+ * this.
+ */
+static void old_ich_force_enable_hpet_user(struct pci_dev *dev)
+{
+ if (hpet_force_user)
+ old_ich_force_enable_hpet(dev);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
+ old_ich_force_enable_hpet_user);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
+ old_ich_force_enable_hpet_user);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12,
+ old_ich_force_enable_hpet_user);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
+ old_ich_force_enable_hpet_user);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,
+ old_ich_force_enable_hpet_user);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
+ old_ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12,
+ old_ich_force_enable_hpet);
+
+
+static void vt8237_force_hpet_resume(void)
+{
+ u32 val;
+
+ if (!force_hpet_address || !cached_dev)
+ return;
+
+ val = 0xfed00000 | 0x80;
+ pci_write_config_dword(cached_dev, 0x68, val);
+
+ pci_read_config_dword(cached_dev, 0x68, &val);
+ if (val & 0x80)
+ printk(KERN_DEBUG "Force enabled HPET at resume\n");
+ else
+ BUG();
+}
+
+static void vt8237_force_enable_hpet(struct pci_dev *dev)
+{
+ u32 uninitialized_var(val);
+
+ if (hpet_address || force_hpet_address)
+ return;
+
+ if (!hpet_force_user) {
+ hpet_print_force_info();
+ return;
+ }
+
+ pci_read_config_dword(dev, 0x68, &val);
+ /*
+ * Bit 7 is HPET enable bit.
+ * Bit 31:10 is HPET base address (contrary to what datasheet claims)
+ */
+ if (val & 0x80) {
+ force_hpet_address = (val & ~0x3ff);
+ dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
+ force_hpet_address);
+ return;
+ }
+
+ /*
+ * HPET is disabled. Trying enabling at FED00000 and check
+ * whether it sticks
+ */
+ val = 0xfed00000 | 0x80;
+ pci_write_config_dword(dev, 0x68, val);
+
+ pci_read_config_dword(dev, 0x68, &val);
+ if (val & 0x80) {
+ force_hpet_address = (val & ~0x3ff);
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
+ cached_dev = dev;
+ force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
+ return;
+ }
+
+ dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
+ vt8237_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
+ vt8237_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700,
+ vt8237_force_enable_hpet);
+
+static void ati_force_hpet_resume(void)
+{
+ pci_write_config_dword(cached_dev, 0x14, 0xfed00000);
+ printk(KERN_DEBUG "Force enabled HPET at resume\n");
+}
+
+static u32 ati_ixp4x0_rev(struct pci_dev *dev)
+{
+ int err = 0;
+ u32 d = 0;
+ u8 b = 0;
+
+ err = pci_read_config_byte(dev, 0xac, &b);
+ b &= ~(1<<5);
+ err |= pci_write_config_byte(dev, 0xac, b);
+ err |= pci_read_config_dword(dev, 0x70, &d);
+ d |= 1<<8;
+ err |= pci_write_config_dword(dev, 0x70, d);
+ err |= pci_read_config_dword(dev, 0x8, &d);
+ d &= 0xff;
+ dev_printk(KERN_DEBUG, &dev->dev, "SB4X0 revision 0x%x\n", d);
+
+ WARN_ON_ONCE(err);
+
+ return d;
+}
+
+static void ati_force_enable_hpet(struct pci_dev *dev)
+{
+ u32 d, val;
+ u8 b;
+
+ if (hpet_address || force_hpet_address)
+ return;
+
+ if (!hpet_force_user) {
+ hpet_print_force_info();
+ return;
+ }
+
+ d = ati_ixp4x0_rev(dev);
+ if (d < 0x82)
+ return;
+
+ /* base address */
+ pci_write_config_dword(dev, 0x14, 0xfed00000);
+ pci_read_config_dword(dev, 0x14, &val);
+
+ /* enable interrupt */
+ outb(0x72, 0xcd6); b = inb(0xcd7);
+ b |= 0x1;
+ outb(0x72, 0xcd6); outb(b, 0xcd7);
+ outb(0x72, 0xcd6); b = inb(0xcd7);
+ if (!(b & 0x1))
+ return;
+ pci_read_config_dword(dev, 0x64, &d);
+ d |= (1<<10);
+ pci_write_config_dword(dev, 0x64, d);
+ pci_read_config_dword(dev, 0x64, &d);
+ if (!(d & (1<<10)))
+ return;
+
+ force_hpet_address = val;
+ force_hpet_resume_type = ATI_FORCE_HPET_RESUME;
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
+ force_hpet_address);
+ cached_dev = dev;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
+ ati_force_enable_hpet);
+
+/*
+ * Undocumented chipset feature taken from LinuxBIOS.
+ */
+static void nvidia_force_hpet_resume(void)
+{
+ pci_write_config_dword(cached_dev, 0x44, 0xfed00001);
+ printk(KERN_DEBUG "Force enabled HPET at resume\n");
+}
+
+static void nvidia_force_enable_hpet(struct pci_dev *dev)
+{
+ u32 uninitialized_var(val);
+
+ if (hpet_address || force_hpet_address)
+ return;
+
+ if (!hpet_force_user) {
+ hpet_print_force_info();
+ return;
+ }
+
+ pci_write_config_dword(dev, 0x44, 0xfed00001);
+ pci_read_config_dword(dev, 0x44, &val);
+ force_hpet_address = val & 0xfffffffe;
+ force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
+ force_hpet_address);
+ cached_dev = dev;
+ return;
+}
+
+/* ISA Bridges */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0050,
+ nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051,
+ nvidia_force_enable_hpet);
+
+/* LPC bridges */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260,
+ nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360,
+ nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361,
+ nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0362,
+ nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0363,
+ nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0364,
+ nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0365,
+ nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0366,
+ nvidia_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0367,
+ nvidia_force_enable_hpet);
+
+void force_hpet_resume(void)
+{
+ switch (force_hpet_resume_type) {
+ case ICH_FORCE_HPET_RESUME:
+ ich_force_hpet_resume();
+ return;
+ case OLD_ICH_FORCE_HPET_RESUME:
+ old_ich_force_hpet_resume();
+ return;
+ case VT8237_FORCE_HPET_RESUME:
+ vt8237_force_hpet_resume();
+ return;
+ case NVIDIA_FORCE_HPET_RESUME:
+ nvidia_force_hpet_resume();
+ return;
+ case ATI_FORCE_HPET_RESUME:
+ ati_force_hpet_resume();
+ return;
+ default:
+ break;
+ }
+}
+
+/*
+ * According to the datasheet e6xx systems have the HPET hardwired to
+ * 0xfed00000
+ */
+static void e6xx_force_enable_hpet(struct pci_dev *dev)
+{
+ if (hpet_address || force_hpet_address)
+ return;
+
+ force_hpet_address = 0xFED00000;
+ force_hpet_resume_type = NONE_FORCE_HPET_RESUME;
+ dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+ "0x%lx\n", force_hpet_address);
+ return;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E6XX_CU,
+ e6xx_force_enable_hpet);
+
+/*
+ * HPET MSI on some boards (ATI SB700/SB800) has side effect on
+ * floppy DMA. Disable HPET MSI on such platforms.
+ * See erratum #27 (Misinterpreted MSI Requests May Result in
+ * Corrupted LPC DMA Data) in AMD Publication #46837,
+ * "SB700 Family Product Errata", Rev. 1.0, March 2010.
+ */
+static void force_disable_hpet_msi(struct pci_dev *unused)
+{
+ hpet_msi_disable = true;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+ force_disable_hpet_msi);
+
+#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
+/* Set correct numa_node information for AMD NB functions */
+static void quirk_amd_nb_node(struct pci_dev *dev)
+{
+ struct pci_dev *nb_ht;
+ unsigned int devfn;
+ u32 node;
+ u32 val;
+
+ devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
+ nb_ht = pci_get_slot(dev->bus, devfn);
+ if (!nb_ht)
+ return;
+
+ pci_read_config_dword(nb_ht, 0x60, &val);
+ node = pcibus_to_node(dev->bus) | (val & 7);
+ /*
+ * Some hardware may return an invalid node ID,
+ * so check it first:
+ */
+ if (node_online(node))
+ set_dev_node(&dev->dev, node);
+ pci_dev_put(nb_ht);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_HT,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MAP,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5,
+ quirk_amd_nb_node);
+
+#endif
+
+#ifdef CONFIG_PCI
+/*
+ * Processor does not ensure DRAM scrub read/write sequence
+ * is atomic wrt accesses to CC6 save state area. Therefore
+ * if a concurrent scrub read/write access is to same address
+ * the entry may appear as if it is not written. This quirk
+ * applies to Fam16h models 00h-0Fh
+ *
+ * See "Revision Guide" for AMD F16h models 00h-0fh,
+ * document 51810 rev. 3.04, Nov 2013
+ */
+static void amd_disable_seq_and_redirect_scrub(struct pci_dev *dev)
+{
+ u32 val;
+
+ /*
+ * Suggested workaround:
+ * set D18F3x58[4:0] = 00h and set D18F3x5C[0] = 0b
+ */
+ pci_read_config_dword(dev, 0x58, &val);
+ if (val & 0x1F) {
+ val &= ~(0x1F);
+ pci_write_config_dword(dev, 0x58, val);
+ }
+
+ pci_read_config_dword(dev, 0x5C, &val);
+ if (val & BIT(0)) {
+ val &= ~BIT(0);
+ pci_write_config_dword(dev, 0x5c, val);
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3,
+ amd_disable_seq_and_redirect_scrub);
+
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+#include <linux/jump_label.h>
+#include <asm/string_64.h>
+
+/* Ivy Bridge, Haswell, Broadwell */
+static void quirk_intel_brickland_xeon_ras_cap(struct pci_dev *pdev)
+{
+ u32 capid0;
+
+ pci_read_config_dword(pdev, 0x84, &capid0);
+
+ if (capid0 & 0x10)
+ static_branch_inc(&mcsafe_key);
+}
+
+/* Skylake */
+static void quirk_intel_purley_xeon_ras_cap(struct pci_dev *pdev)
+{
+ u32 capid0, capid5;
+
+ pci_read_config_dword(pdev, 0x84, &capid0);
+ pci_read_config_dword(pdev, 0x98, &capid5);
+
+ /*
+ * CAPID0{7:6} indicate whether this is an advanced RAS SKU
+ * CAPID5{8:5} indicate that various NVDIMM usage modes are
+ * enabled, so memory machine check recovery is also enabled.
+ */
+ if ((capid0 & 0xc0) == 0xc0 || (capid5 & 0x1e0))
+ static_branch_inc(&mcsafe_key);
+
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0ec3, quirk_intel_brickland_xeon_ras_cap);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, quirk_intel_brickland_xeon_ras_cap);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, quirk_intel_brickland_xeon_ras_cap);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2083, quirk_intel_purley_xeon_ras_cap);
+#endif
+#endif
+
+bool x86_apple_machine;
+EXPORT_SYMBOL(x86_apple_machine);
+
+void __init early_platform_quirks(void)
+{
+ x86_apple_machine = dmi_match(DMI_SYS_VENDOR, "Apple Inc.") ||
+ dmi_match(DMI_SYS_VENDOR, "Apple Computer, Inc.");
+}