v4.19.13 snapshot.
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
new file mode 100644
index 0000000..032b600
--- /dev/null
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -0,0 +1,381 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_X86_NOSPEC_BRANCH_H_
+#define _ASM_X86_NOSPEC_BRANCH_H_
+
+#include <linux/static_key.h>
+
+#include <asm/alternative.h>
+#include <asm/alternative-asm.h>
+#include <asm/cpufeatures.h>
+#include <asm/msr-index.h>
+
+/*
+ * Fill the CPU return stack buffer.
+ *
+ * Each entry in the RSB, if used for a speculative 'ret', contains an
+ * infinite 'pause; lfence; jmp' loop to capture speculative execution.
+ *
+ * This is required in various cases for retpoline and IBRS-based
+ * mitigations for the Spectre variant 2 vulnerability. Sometimes to
+ * eliminate potentially bogus entries from the RSB, and sometimes
+ * purely to ensure that it doesn't get empty, which on some CPUs would
+ * allow predictions from other (unwanted!) sources to be used.
+ *
+ * We define a CPP macro such that it can be used from both .S files and
+ * inline assembly. It's possible to do a .macro and then include that
+ * from C via asm(".include <asm/nospec-branch.h>") but let's not go there.
+ */
+
+#define RSB_CLEAR_LOOPS 32 /* To forcibly overwrite all entries */
+#define RSB_FILL_LOOPS 16 /* To avoid underflow */
+
+/*
+ * Google experimented with loop-unrolling and this turned out to be
+ * the optimal version — two calls, each with their own speculation
+ * trap should their return address end up getting used, in a loop.
+ */
+#define __FILL_RETURN_BUFFER(reg, nr, sp) \
+ mov $(nr/2), reg; \
+771: \
+ call 772f; \
+773: /* speculation trap */ \
+ pause; \
+ lfence; \
+ jmp 773b; \
+772: \
+ call 774f; \
+775: /* speculation trap */ \
+ pause; \
+ lfence; \
+ jmp 775b; \
+774: \
+ dec reg; \
+ jnz 771b; \
+ add $(BITS_PER_LONG/8) * nr, sp;
+
+#ifdef __ASSEMBLY__
+
+/*
+ * This should be used immediately before a retpoline alternative. It tells
+ * objtool where the retpolines are so that it can make sense of the control
+ * flow by just reading the original instruction(s) and ignoring the
+ * alternatives.
+ */
+.macro ANNOTATE_NOSPEC_ALTERNATIVE
+ .Lannotate_\@:
+ .pushsection .discard.nospec
+ .long .Lannotate_\@ - .
+ .popsection
+.endm
+
+/*
+ * This should be used immediately before an indirect jump/call. It tells
+ * objtool the subsequent indirect jump/call is vouched safe for retpoline
+ * builds.
+ */
+.macro ANNOTATE_RETPOLINE_SAFE
+ .Lannotate_\@:
+ .pushsection .discard.retpoline_safe
+ _ASM_PTR .Lannotate_\@
+ .popsection
+.endm
+
+/*
+ * These are the bare retpoline primitives for indirect jmp and call.
+ * Do not use these directly; they only exist to make the ALTERNATIVE
+ * invocation below less ugly.
+ */
+.macro RETPOLINE_JMP reg:req
+ call .Ldo_rop_\@
+.Lspec_trap_\@:
+ pause
+ lfence
+ jmp .Lspec_trap_\@
+.Ldo_rop_\@:
+ mov \reg, (%_ASM_SP)
+ ret
+.endm
+
+/*
+ * This is a wrapper around RETPOLINE_JMP so the called function in reg
+ * returns to the instruction after the macro.
+ */
+.macro RETPOLINE_CALL reg:req
+ jmp .Ldo_call_\@
+.Ldo_retpoline_jmp_\@:
+ RETPOLINE_JMP \reg
+.Ldo_call_\@:
+ call .Ldo_retpoline_jmp_\@
+.endm
+
+/*
+ * JMP_NOSPEC and CALL_NOSPEC macros can be used instead of a simple
+ * indirect jmp/call which may be susceptible to the Spectre variant 2
+ * attack.
+ */
+.macro JMP_NOSPEC reg:req
+#ifdef CONFIG_RETPOLINE
+ ANNOTATE_NOSPEC_ALTERNATIVE
+ ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; jmp *\reg), \
+ __stringify(RETPOLINE_JMP \reg), X86_FEATURE_RETPOLINE, \
+ __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *\reg), X86_FEATURE_RETPOLINE_AMD
+#else
+ jmp *\reg
+#endif
+.endm
+
+.macro CALL_NOSPEC reg:req
+#ifdef CONFIG_RETPOLINE
+ ANNOTATE_NOSPEC_ALTERNATIVE
+ ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; call *\reg), \
+ __stringify(RETPOLINE_CALL \reg), X86_FEATURE_RETPOLINE,\
+ __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; call *\reg), X86_FEATURE_RETPOLINE_AMD
+#else
+ call *\reg
+#endif
+.endm
+
+ /*
+ * A simpler FILL_RETURN_BUFFER macro. Don't make people use the CPP
+ * monstrosity above, manually.
+ */
+.macro FILL_RETURN_BUFFER reg:req nr:req ftr:req
+#ifdef CONFIG_RETPOLINE
+ ANNOTATE_NOSPEC_ALTERNATIVE
+ ALTERNATIVE "jmp .Lskip_rsb_\@", \
+ __stringify(__FILL_RETURN_BUFFER(\reg,\nr,%_ASM_SP)) \
+ \ftr
+.Lskip_rsb_\@:
+#endif
+.endm
+
+#else /* __ASSEMBLY__ */
+
+#define ANNOTATE_NOSPEC_ALTERNATIVE \
+ "999:\n\t" \
+ ".pushsection .discard.nospec\n\t" \
+ ".long 999b - .\n\t" \
+ ".popsection\n\t"
+
+#define ANNOTATE_RETPOLINE_SAFE \
+ "999:\n\t" \
+ ".pushsection .discard.retpoline_safe\n\t" \
+ _ASM_PTR " 999b\n\t" \
+ ".popsection\n\t"
+
+#ifdef CONFIG_RETPOLINE
+#ifdef CONFIG_X86_64
+
+/*
+ * Inline asm uses the %V modifier which is only in newer GCC
+ * which is ensured when CONFIG_RETPOLINE is defined.
+ */
+# define CALL_NOSPEC \
+ ANNOTATE_NOSPEC_ALTERNATIVE \
+ ALTERNATIVE_2( \
+ ANNOTATE_RETPOLINE_SAFE \
+ "call *%[thunk_target]\n", \
+ "call __x86_indirect_thunk_%V[thunk_target]\n", \
+ X86_FEATURE_RETPOLINE, \
+ "lfence;\n" \
+ ANNOTATE_RETPOLINE_SAFE \
+ "call *%[thunk_target]\n", \
+ X86_FEATURE_RETPOLINE_AMD)
+# define THUNK_TARGET(addr) [thunk_target] "r" (addr)
+
+#else /* CONFIG_X86_32 */
+/*
+ * For i386 we use the original ret-equivalent retpoline, because
+ * otherwise we'll run out of registers. We don't care about CET
+ * here, anyway.
+ */
+# define CALL_NOSPEC \
+ ANNOTATE_NOSPEC_ALTERNATIVE \
+ ALTERNATIVE_2( \
+ ANNOTATE_RETPOLINE_SAFE \
+ "call *%[thunk_target]\n", \
+ " jmp 904f;\n" \
+ " .align 16\n" \
+ "901: call 903f;\n" \
+ "902: pause;\n" \
+ " lfence;\n" \
+ " jmp 902b;\n" \
+ " .align 16\n" \
+ "903: addl $4, %%esp;\n" \
+ " pushl %[thunk_target];\n" \
+ " ret;\n" \
+ " .align 16\n" \
+ "904: call 901b;\n", \
+ X86_FEATURE_RETPOLINE, \
+ "lfence;\n" \
+ ANNOTATE_RETPOLINE_SAFE \
+ "call *%[thunk_target]\n", \
+ X86_FEATURE_RETPOLINE_AMD)
+
+# define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
+#endif
+#else /* No retpoline for C / inline asm */
+# define CALL_NOSPEC "call *%[thunk_target]\n"
+# define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
+#endif
+
+/* The Spectre V2 mitigation variants */
+enum spectre_v2_mitigation {
+ SPECTRE_V2_NONE,
+ SPECTRE_V2_RETPOLINE_GENERIC,
+ SPECTRE_V2_RETPOLINE_AMD,
+ SPECTRE_V2_IBRS_ENHANCED,
+};
+
+/* The indirect branch speculation control variants */
+enum spectre_v2_user_mitigation {
+ SPECTRE_V2_USER_NONE,
+ SPECTRE_V2_USER_STRICT,
+ SPECTRE_V2_USER_PRCTL,
+ SPECTRE_V2_USER_SECCOMP,
+};
+
+/* The Speculative Store Bypass disable variants */
+enum ssb_mitigation {
+ SPEC_STORE_BYPASS_NONE,
+ SPEC_STORE_BYPASS_DISABLE,
+ SPEC_STORE_BYPASS_PRCTL,
+ SPEC_STORE_BYPASS_SECCOMP,
+};
+
+extern char __indirect_thunk_start[];
+extern char __indirect_thunk_end[];
+
+/*
+ * On VMEXIT we must ensure that no RSB predictions learned in the guest
+ * can be followed in the host, by overwriting the RSB completely. Both
+ * retpoline and IBRS mitigations for Spectre v2 need this; only on future
+ * CPUs with IBRS_ALL *might* it be avoided.
+ */
+static inline void vmexit_fill_RSB(void)
+{
+#ifdef CONFIG_RETPOLINE
+ unsigned long loops;
+
+ asm volatile (ANNOTATE_NOSPEC_ALTERNATIVE
+ ALTERNATIVE("jmp 910f",
+ __stringify(__FILL_RETURN_BUFFER(%0, RSB_CLEAR_LOOPS, %1)),
+ X86_FEATURE_RETPOLINE)
+ "910:"
+ : "=r" (loops), ASM_CALL_CONSTRAINT
+ : : "memory" );
+#endif
+}
+
+static __always_inline
+void alternative_msr_write(unsigned int msr, u64 val, unsigned int feature)
+{
+ asm volatile(ALTERNATIVE("", "wrmsr", %c[feature])
+ : : "c" (msr),
+ "a" ((u32)val),
+ "d" ((u32)(val >> 32)),
+ [feature] "i" (feature)
+ : "memory");
+}
+
+static inline void indirect_branch_prediction_barrier(void)
+{
+ u64 val = PRED_CMD_IBPB;
+
+ alternative_msr_write(MSR_IA32_PRED_CMD, val, X86_FEATURE_USE_IBPB);
+}
+
+/* The Intel SPEC CTRL MSR base value cache */
+extern u64 x86_spec_ctrl_base;
+
+/*
+ * With retpoline, we must use IBRS to restrict branch prediction
+ * before calling into firmware.
+ *
+ * (Implemented as CPP macros due to header hell.)
+ */
+#define firmware_restrict_branch_speculation_start() \
+do { \
+ u64 val = x86_spec_ctrl_base | SPEC_CTRL_IBRS; \
+ \
+ preempt_disable(); \
+ alternative_msr_write(MSR_IA32_SPEC_CTRL, val, \
+ X86_FEATURE_USE_IBRS_FW); \
+} while (0)
+
+#define firmware_restrict_branch_speculation_end() \
+do { \
+ u64 val = x86_spec_ctrl_base; \
+ \
+ alternative_msr_write(MSR_IA32_SPEC_CTRL, val, \
+ X86_FEATURE_USE_IBRS_FW); \
+ preempt_enable(); \
+} while (0)
+
+DECLARE_STATIC_KEY_FALSE(switch_to_cond_stibp);
+DECLARE_STATIC_KEY_FALSE(switch_mm_cond_ibpb);
+DECLARE_STATIC_KEY_FALSE(switch_mm_always_ibpb);
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Below is used in the eBPF JIT compiler and emits the byte sequence
+ * for the following assembly:
+ *
+ * With retpolines configured:
+ *
+ * callq do_rop
+ * spec_trap:
+ * pause
+ * lfence
+ * jmp spec_trap
+ * do_rop:
+ * mov %rax,(%rsp) for x86_64
+ * mov %edx,(%esp) for x86_32
+ * retq
+ *
+ * Without retpolines configured:
+ *
+ * jmp *%rax for x86_64
+ * jmp *%edx for x86_32
+ */
+#ifdef CONFIG_RETPOLINE
+# ifdef CONFIG_X86_64
+# define RETPOLINE_RAX_BPF_JIT_SIZE 17
+# define RETPOLINE_RAX_BPF_JIT() \
+do { \
+ EMIT1_off32(0xE8, 7); /* callq do_rop */ \
+ /* spec_trap: */ \
+ EMIT2(0xF3, 0x90); /* pause */ \
+ EMIT3(0x0F, 0xAE, 0xE8); /* lfence */ \
+ EMIT2(0xEB, 0xF9); /* jmp spec_trap */ \
+ /* do_rop: */ \
+ EMIT4(0x48, 0x89, 0x04, 0x24); /* mov %rax,(%rsp) */ \
+ EMIT1(0xC3); /* retq */ \
+} while (0)
+# else /* !CONFIG_X86_64 */
+# define RETPOLINE_EDX_BPF_JIT() \
+do { \
+ EMIT1_off32(0xE8, 7); /* call do_rop */ \
+ /* spec_trap: */ \
+ EMIT2(0xF3, 0x90); /* pause */ \
+ EMIT3(0x0F, 0xAE, 0xE8); /* lfence */ \
+ EMIT2(0xEB, 0xF9); /* jmp spec_trap */ \
+ /* do_rop: */ \
+ EMIT3(0x89, 0x14, 0x24); /* mov %edx,(%esp) */ \
+ EMIT1(0xC3); /* ret */ \
+} while (0)
+# endif
+#else /* !CONFIG_RETPOLINE */
+# ifdef CONFIG_X86_64
+# define RETPOLINE_RAX_BPF_JIT_SIZE 2
+# define RETPOLINE_RAX_BPF_JIT() \
+ EMIT2(0xFF, 0xE0); /* jmp *%rax */
+# else /* !CONFIG_X86_64 */
+# define RETPOLINE_EDX_BPF_JIT() \
+ EMIT2(0xFF, 0xE2) /* jmp *%edx */
+# endif
+#endif
+
+#endif /* _ASM_X86_NOSPEC_BRANCH_H_ */