v4.19.13 snapshot.
diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h
new file mode 100644
index 0000000..39a2fb2
--- /dev/null
+++ b/arch/x86/include/asm/mwait.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_MWAIT_H
+#define _ASM_X86_MWAIT_H
+
+#include <linux/sched.h>
+#include <linux/sched/idle.h>
+
+#include <asm/cpufeature.h>
+
+#define MWAIT_SUBSTATE_MASK 0xf
+#define MWAIT_CSTATE_MASK 0xf
+#define MWAIT_SUBSTATE_SIZE 4
+#define MWAIT_HINT2CSTATE(hint) (((hint) >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK)
+#define MWAIT_HINT2SUBSTATE(hint) ((hint) & MWAIT_CSTATE_MASK)
+
+#define CPUID_MWAIT_LEAF 5
+#define CPUID5_ECX_EXTENSIONS_SUPPORTED 0x1
+#define CPUID5_ECX_INTERRUPT_BREAK 0x2
+
+#define MWAIT_ECX_INTERRUPT_BREAK 0x1
+#define MWAITX_ECX_TIMER_ENABLE BIT(1)
+#define MWAITX_MAX_LOOPS ((u32)-1)
+#define MWAITX_DISABLE_CSTATES 0xf
+
+static inline void __monitor(const void *eax, unsigned long ecx,
+ unsigned long edx)
+{
+ /* "monitor %eax, %ecx, %edx;" */
+ asm volatile(".byte 0x0f, 0x01, 0xc8;"
+ :: "a" (eax), "c" (ecx), "d"(edx));
+}
+
+static inline void __monitorx(const void *eax, unsigned long ecx,
+ unsigned long edx)
+{
+ /* "monitorx %eax, %ecx, %edx;" */
+ asm volatile(".byte 0x0f, 0x01, 0xfa;"
+ :: "a" (eax), "c" (ecx), "d"(edx));
+}
+
+static inline void __mwait(unsigned long eax, unsigned long ecx)
+{
+ /* "mwait %eax, %ecx;" */
+ asm volatile(".byte 0x0f, 0x01, 0xc9;"
+ :: "a" (eax), "c" (ecx));
+}
+
+/*
+ * MWAITX allows for a timer expiration to get the core out a wait state in
+ * addition to the default MWAIT exit condition of a store appearing at a
+ * monitored virtual address.
+ *
+ * Registers:
+ *
+ * MWAITX ECX[1]: enable timer if set
+ * MWAITX EBX[31:0]: max wait time expressed in SW P0 clocks. The software P0
+ * frequency is the same as the TSC frequency.
+ *
+ * Below is a comparison between MWAIT and MWAITX on AMD processors:
+ *
+ * MWAIT MWAITX
+ * opcode 0f 01 c9 | 0f 01 fb
+ * ECX[0] value of RFLAGS.IF seen by instruction
+ * ECX[1] unused/#GP if set | enable timer if set
+ * ECX[31:2] unused/#GP if set
+ * EAX unused (reserve for hint)
+ * EBX[31:0] unused | max wait time (P0 clocks)
+ *
+ * MONITOR MONITORX
+ * opcode 0f 01 c8 | 0f 01 fa
+ * EAX (logical) address to monitor
+ * ECX #GP if not zero
+ */
+static inline void __mwaitx(unsigned long eax, unsigned long ebx,
+ unsigned long ecx)
+{
+ /* "mwaitx %eax, %ebx, %ecx;" */
+ asm volatile(".byte 0x0f, 0x01, 0xfb;"
+ :: "a" (eax), "b" (ebx), "c" (ecx));
+}
+
+static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
+{
+ trace_hardirqs_on();
+ /* "mwait %eax, %ecx;" */
+ asm volatile("sti; .byte 0x0f, 0x01, 0xc9;"
+ :: "a" (eax), "c" (ecx));
+}
+
+/*
+ * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
+ * which can obviate IPI to trigger checking of need_resched.
+ * We execute MONITOR against need_resched and enter optimized wait state
+ * through MWAIT. Whenever someone changes need_resched, we would be woken
+ * up from MWAIT (without an IPI).
+ *
+ * New with Core Duo processors, MWAIT can take some hints based on CPU
+ * capability.
+ */
+static inline void mwait_idle_with_hints(unsigned long eax, unsigned long ecx)
+{
+ if (static_cpu_has_bug(X86_BUG_MONITOR) || !current_set_polling_and_test()) {
+ if (static_cpu_has_bug(X86_BUG_CLFLUSH_MONITOR)) {
+ mb();
+ clflush((void *)¤t_thread_info()->flags);
+ mb();
+ }
+
+ __monitor((void *)¤t_thread_info()->flags, 0, 0);
+ if (!need_resched())
+ __mwait(eax, ecx);
+ }
+ current_clr_polling();
+}
+
+#endif /* _ASM_X86_MWAIT_H */