v4.19.13 snapshot.
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
new file mode 100644
index 0000000..5011ffe
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -0,0 +1,799 @@
+/*
+ * Freescale MPC85xx/MPC86xx RapidIO support
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/extable.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/machdep.h>
+
+#include "fsl_rio.h"
+
+#undef DEBUG_PW /* Port-Write debugging */
+
+#define RIO_PORT1_EDCSR 0x0640
+#define RIO_PORT2_EDCSR 0x0680
+#define RIO_PORT1_IECSR 0x10130
+#define RIO_PORT2_IECSR 0x101B0
+
+#define RIO_GCCSR 0x13c
+#define RIO_ESCSR 0x158
+#define ESCSR_CLEAR 0x07120204
+#define RIO_PORT2_ESCSR 0x178
+#define RIO_CCSR 0x15c
+#define RIO_LTLEDCSR_IER 0x80000000
+#define RIO_LTLEDCSR_PRT 0x01000000
+#define IECSR_CLEAR 0x80000000
+#define RIO_ISR_AACR 0x10120
+#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
+
+#define RIWTAR_TRAD_VAL_SHIFT 12
+#define RIWTAR_TRAD_MASK 0x00FFFFFF
+#define RIWBAR_BADD_VAL_SHIFT 12
+#define RIWBAR_BADD_MASK 0x003FFFFF
+#define RIWAR_ENABLE 0x80000000
+#define RIWAR_TGINT_LOCAL 0x00F00000
+#define RIWAR_RDTYP_NO_SNOOP 0x00040000
+#define RIWAR_RDTYP_SNOOP 0x00050000
+#define RIWAR_WRTYP_NO_SNOOP 0x00004000
+#define RIWAR_WRTYP_SNOOP 0x00005000
+#define RIWAR_WRTYP_ALLOC 0x00006000
+#define RIWAR_SIZE_MASK 0x0000003F
+
+static DEFINE_SPINLOCK(fsl_rio_config_lock);
+
+#define __fsl_read_rio_config(x, addr, err, op) \
+ __asm__ __volatile__( \
+ "1: "op" %1,0(%2)\n" \
+ " eieio\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %1,-1\n" \
+ " li %0,%3\n" \
+ " b 2b\n" \
+ ".previous\n" \
+ EX_TABLE(1b, 3b) \
+ : "=r" (err), "=r" (x) \
+ : "b" (addr), "i" (-EFAULT), "0" (err))
+
+void __iomem *rio_regs_win;
+void __iomem *rmu_regs_win;
+resource_size_t rio_law_start;
+
+struct fsl_rio_dbell *dbell;
+struct fsl_rio_pw *pw;
+
+#ifdef CONFIG_E500
+int fsl_rio_mcheck_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *entry;
+ unsigned long reason;
+
+ if (!rio_regs_win)
+ return 0;
+
+ reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
+ if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
+ /* Check if we are prepared to handle this fault */
+ entry = search_exception_tables(regs->nip);
+ if (entry) {
+ pr_debug("RIO: %s - MC Exception handled\n",
+ __func__);
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
+ 0);
+ regs->msr |= MSR_RI;
+ regs->nip = extable_fixup(entry);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception);
+#endif
+
+/**
+ * fsl_local_config_read - Generate a MPC85xx local config space read
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a MPC85xx local configuration space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_local_config_read(struct rio_mport *mport,
+ int index, u32 offset, int len, u32 *data)
+{
+ struct rio_priv *priv = mport->priv;
+ pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
+ offset);
+ *data = in_be32(priv->regs_win + offset);
+
+ return 0;
+}
+
+/**
+ * fsl_local_config_write - Generate a MPC85xx local config space write
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a MPC85xx local configuration space write. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int fsl_local_config_write(struct rio_mport *mport,
+ int index, u32 offset, int len, u32 data)
+{
+ struct rio_priv *priv = mport->priv;
+ pr_debug
+ ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
+ index, offset, data);
+ out_be32(priv->regs_win + offset, data);
+
+ return 0;
+}
+
+/**
+ * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a MPC85xx read maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 *val)
+{
+ struct rio_priv *priv = mport->priv;
+ unsigned long flags;
+ u8 *data;
+ u32 rval, err = 0;
+
+ pr_debug
+ ("fsl_rio_config_read:"
+ " index %d destid %d hopcount %d offset %8.8x len %d\n",
+ index, destid, hopcount, offset, len);
+
+ /* 16MB maintenance window possible */
+ /* allow only aligned access to maintenance registers */
+ if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
+ return -EINVAL;
+
+ spin_lock_irqsave(&fsl_rio_config_lock, flags);
+
+ out_be32(&priv->maint_atmu_regs->rowtar,
+ (destid << 22) | (hopcount << 12) | (offset >> 12));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+
+ data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
+ switch (len) {
+ case 1:
+ __fsl_read_rio_config(rval, data, err, "lbz");
+ break;
+ case 2:
+ __fsl_read_rio_config(rval, data, err, "lhz");
+ break;
+ case 4:
+ __fsl_read_rio_config(rval, data, err, "lwz");
+ break;
+ default:
+ spin_unlock_irqrestore(&fsl_rio_config_lock, flags);
+ return -EINVAL;
+ }
+
+ if (err) {
+ pr_debug("RIO: cfg_read error %d for %x:%x:%x\n",
+ err, destid, hopcount, offset);
+ }
+
+ spin_unlock_irqrestore(&fsl_rio_config_lock, flags);
+ *val = rval;
+
+ return err;
+}
+
+/**
+ * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates an MPC85xx write maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 val)
+{
+ struct rio_priv *priv = mport->priv;
+ unsigned long flags;
+ u8 *data;
+ int ret = 0;
+
+ pr_debug
+ ("fsl_rio_config_write:"
+ " index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+ index, destid, hopcount, offset, len, val);
+
+ /* 16MB maintenance windows possible */
+ /* allow only aligned access to maintenance registers */
+ if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
+ return -EINVAL;
+
+ spin_lock_irqsave(&fsl_rio_config_lock, flags);
+
+ out_be32(&priv->maint_atmu_regs->rowtar,
+ (destid << 22) | (hopcount << 12) | (offset >> 12));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+
+ data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
+ switch (len) {
+ case 1:
+ out_8((u8 *) data, val);
+ break;
+ case 2:
+ out_be16((u16 *) data, val);
+ break;
+ case 4:
+ out_be32((u32 *) data, val);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ spin_unlock_irqrestore(&fsl_rio_config_lock, flags);
+
+ return ret;
+}
+
+static void fsl_rio_inbound_mem_init(struct rio_priv *priv)
+{
+ int i;
+
+ /* close inbound windows */
+ for (i = 0; i < RIO_INB_ATMU_COUNT; i++)
+ out_be32(&priv->inb_atmu_regs[i].riwar, 0);
+}
+
+int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
+ u64 rstart, u64 size, u32 flags)
+{
+ struct rio_priv *priv = mport->priv;
+ u32 base_size;
+ unsigned int base_size_log;
+ u64 win_start, win_end;
+ u32 riwar;
+ int i;
+
+ if ((size & (size - 1)) != 0 || size > 0x400000000ULL)
+ return -EINVAL;
+
+ base_size_log = ilog2(size);
+ base_size = 1 << base_size_log;
+
+ /* check if addresses are aligned with the window size */
+ if (lstart & (base_size - 1))
+ return -EINVAL;
+ if (rstart & (base_size - 1))
+ return -EINVAL;
+
+ /* check for conflicting ranges */
+ for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
+ riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
+ if ((riwar & RIWAR_ENABLE) == 0)
+ continue;
+ win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK))
+ << RIWBAR_BADD_VAL_SHIFT;
+ win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1);
+ if (rstart < win_end && (rstart + size) > win_start)
+ return -EINVAL;
+ }
+
+ /* find unused atmu */
+ for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
+ riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
+ if ((riwar & RIWAR_ENABLE) == 0)
+ break;
+ }
+ if (i >= RIO_INB_ATMU_COUNT)
+ return -ENOMEM;
+
+ out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT);
+ out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT);
+ out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL |
+ RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1));
+
+ return 0;
+}
+
+void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart)
+{
+ u32 win_start_shift, base_start_shift;
+ struct rio_priv *priv = mport->priv;
+ u32 riwar, riwtar;
+ int i;
+
+ /* skip default window */
+ base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT;
+ for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
+ riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
+ if ((riwar & RIWAR_ENABLE) == 0)
+ continue;
+
+ riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar);
+ win_start_shift = riwtar & RIWTAR_TRAD_MASK;
+ if (win_start_shift == base_start_shift) {
+ out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE);
+ return;
+ }
+ }
+}
+
+void fsl_rio_port_error_handler(int offset)
+{
+ /*XXX: Error recovery is not implemented, we just clear errors */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
+
+ if (offset == 0) {
+ out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
+ } else {
+ out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
+ }
+}
+static inline void fsl_rio_info(struct device *dev, u32 ccsr)
+{
+ const char *str;
+ if (ccsr & 1) {
+ /* Serial phy */
+ switch (ccsr >> 30) {
+ case 0:
+ str = "1";
+ break;
+ case 1:
+ str = "4";
+ break;
+ default:
+ str = "Unknown";
+ break;
+ }
+ dev_info(dev, "Hardware port width: %s\n", str);
+
+ switch ((ccsr >> 27) & 7) {
+ case 0:
+ str = "Single-lane 0";
+ break;
+ case 1:
+ str = "Single-lane 2";
+ break;
+ case 2:
+ str = "Four-lane";
+ break;
+ default:
+ str = "Unknown";
+ break;
+ }
+ dev_info(dev, "Training connection status: %s\n", str);
+ } else {
+ /* Parallel phy */
+ if (!(ccsr & 0x80000000))
+ dev_info(dev, "Output port operating in 8-bit mode\n");
+ if (!(ccsr & 0x08000000))
+ dev_info(dev, "Input port operating in 8-bit mode\n");
+ }
+}
+
+/**
+ * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
+ * @dev: platform_device pointer
+ *
+ * Initializes MPC85xx RapidIO hardware interface, configures
+ * master port with system-specific info, and registers the
+ * master port with the RapidIO subsystem.
+ */
+int fsl_rio_setup(struct platform_device *dev)
+{
+ struct rio_ops *ops;
+ struct rio_mport *port;
+ struct rio_priv *priv;
+ int rc = 0;
+ const u32 *dt_range, *cell, *port_index;
+ u32 active_ports = 0;
+ struct resource regs, rmu_regs;
+ struct device_node *np, *rmu_node;
+ int rlen;
+ u32 ccsr;
+ u64 range_start, range_size;
+ int paw, aw, sw;
+ u32 i;
+ static int tmp;
+ struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL};
+
+ if (!dev->dev.of_node) {
+ dev_err(&dev->dev, "Device OF-Node is NULL");
+ return -ENODEV;
+ }
+
+ rc = of_address_to_resource(dev->dev.of_node, 0, ®s);
+ if (rc) {
+ dev_err(&dev->dev, "Can't get %pOF property 'reg'\n",
+ dev->dev.of_node);
+ return -EFAULT;
+ }
+ dev_info(&dev->dev, "Of-device full name %pOF\n",
+ dev->dev.of_node);
+ dev_info(&dev->dev, "Regs: %pR\n", ®s);
+
+ rio_regs_win = ioremap(regs.start, resource_size(®s));
+ if (!rio_regs_win) {
+ dev_err(&dev->dev, "Unable to map rio register window\n");
+ rc = -ENOMEM;
+ goto err_rio_regs;
+ }
+
+ ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
+ if (!ops) {
+ rc = -ENOMEM;
+ goto err_ops;
+ }
+ ops->lcread = fsl_local_config_read;
+ ops->lcwrite = fsl_local_config_write;
+ ops->cread = fsl_rio_config_read;
+ ops->cwrite = fsl_rio_config_write;
+ ops->dsend = fsl_rio_doorbell_send;
+ ops->pwenable = fsl_rio_pw_enable;
+ ops->open_outb_mbox = fsl_open_outb_mbox;
+ ops->open_inb_mbox = fsl_open_inb_mbox;
+ ops->close_outb_mbox = fsl_close_outb_mbox;
+ ops->close_inb_mbox = fsl_close_inb_mbox;
+ ops->add_outb_message = fsl_add_outb_message;
+ ops->add_inb_buffer = fsl_add_inb_buffer;
+ ops->get_inb_message = fsl_get_inb_message;
+ ops->map_inb = fsl_map_inb_mem;
+ ops->unmap_inb = fsl_unmap_inb_mem;
+
+ rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
+ if (!rmu_node) {
+ dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n");
+ rc = -ENOENT;
+ goto err_rmu;
+ }
+ rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
+ if (rc) {
+ dev_err(&dev->dev, "Can't get %pOF property 'reg'\n",
+ rmu_node);
+ goto err_rmu;
+ }
+ rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs));
+ if (!rmu_regs_win) {
+ dev_err(&dev->dev, "Unable to map rmu register window\n");
+ rc = -ENOMEM;
+ goto err_rmu;
+ }
+ for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") {
+ rmu_np[tmp] = np;
+ tmp++;
+ }
+
+ /*set up doobell node*/
+ np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
+ if (!np) {
+ dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n");
+ rc = -ENODEV;
+ goto err_dbell;
+ }
+ dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL);
+ if (!(dbell)) {
+ dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n");
+ rc = -ENOMEM;
+ goto err_dbell;
+ }
+ dbell->dev = &dev->dev;
+ dbell->bellirq = irq_of_parse_and_map(np, 1);
+ dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq);
+
+ aw = of_n_addr_cells(np);
+ dt_range = of_get_property(np, "reg", &rlen);
+ if (!dt_range) {
+ pr_err("%pOF: unable to find 'reg' property\n",
+ np);
+ rc = -ENOMEM;
+ goto err_pw;
+ }
+ range_start = of_read_number(dt_range, aw);
+ dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win +
+ (u32)range_start);
+
+ /*set up port write node*/
+ np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
+ if (!np) {
+ dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n");
+ rc = -ENODEV;
+ goto err_pw;
+ }
+ pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL);
+ if (!(pw)) {
+ dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n");
+ rc = -ENOMEM;
+ goto err_pw;
+ }
+ pw->dev = &dev->dev;
+ pw->pwirq = irq_of_parse_and_map(np, 0);
+ dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq);
+ aw = of_n_addr_cells(np);
+ dt_range = of_get_property(np, "reg", &rlen);
+ if (!dt_range) {
+ pr_err("%pOF: unable to find 'reg' property\n",
+ np);
+ rc = -ENOMEM;
+ goto err;
+ }
+ range_start = of_read_number(dt_range, aw);
+ pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start);
+
+ /*set up ports node*/
+ for_each_child_of_node(dev->dev.of_node, np) {
+ port_index = of_get_property(np, "cell-index", NULL);
+ if (!port_index) {
+ dev_err(&dev->dev, "Can't get %pOF property 'cell-index'\n",
+ np);
+ continue;
+ }
+
+ dt_range = of_get_property(np, "ranges", &rlen);
+ if (!dt_range) {
+ dev_err(&dev->dev, "Can't get %pOF property 'ranges'\n",
+ np);
+ continue;
+ }
+
+ /* Get node address wide */
+ cell = of_get_property(np, "#address-cells", NULL);
+ if (cell)
+ aw = *cell;
+ else
+ aw = of_n_addr_cells(np);
+ /* Get node size wide */
+ cell = of_get_property(np, "#size-cells", NULL);
+ if (cell)
+ sw = *cell;
+ else
+ sw = of_n_size_cells(np);
+ /* Get parent address wide wide */
+ paw = of_n_addr_cells(np);
+ range_start = of_read_number(dt_range + aw, paw);
+ range_size = of_read_number(dt_range + aw + paw, sw);
+
+ dev_info(&dev->dev, "%pOF: LAW start 0x%016llx, size 0x%016llx.\n",
+ np, range_start, range_size);
+
+ port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ if (!port)
+ continue;
+
+ rc = rio_mport_initialize(port);
+ if (rc) {
+ kfree(port);
+ continue;
+ }
+
+ i = *port_index - 1;
+ port->index = (unsigned char)i;
+
+ priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&dev->dev, "Can't alloc memory for 'priv'\n");
+ kfree(port);
+ continue;
+ }
+
+ INIT_LIST_HEAD(&port->dbells);
+ port->iores.start = range_start;
+ port->iores.end = port->iores.start + range_size - 1;
+ port->iores.flags = IORESOURCE_MEM;
+ port->iores.name = "rio_io_win";
+
+ if (request_resource(&iomem_resource, &port->iores) < 0) {
+ dev_err(&dev->dev, "RIO: Error requesting master port region"
+ " 0x%016llx-0x%016llx\n",
+ (u64)port->iores.start, (u64)port->iores.end);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ sprintf(port->name, "RIO mport %d", i);
+
+ priv->dev = &dev->dev;
+ port->dev.parent = &dev->dev;
+ port->ops = ops;
+ port->priv = priv;
+ port->phys_efptr = 0x100;
+ port->phys_rmap = 1;
+ priv->regs_win = rio_regs_win;
+
+ ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);
+
+ /* Checking the port training status */
+ if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
+ dev_err(&dev->dev, "Port %d is not ready. "
+ "Try to restart connection...\n", i);
+ /* Disable ports */
+ out_be32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0);
+ /* Set 1x lane */
+ setbits32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0x02000000);
+ /* Enable ports */
+ setbits32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0x00600000);
+ msleep(100);
+ if (in_be32((priv->regs_win
+ + RIO_ESCSR + i*0x20)) & 1) {
+ dev_err(&dev->dev,
+ "Port %d restart failed.\n", i);
+ release_resource(&port->iores);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ dev_info(&dev->dev, "Port %d restart success!\n", i);
+ }
+ fsl_rio_info(&dev->dev, ccsr);
+
+ port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
+ & RIO_PEF_CTLS) >> 4;
+ dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
+ port->sys_size ? 65536 : 256);
+
+ if (port->host_deviceid >= 0)
+ out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
+ RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
+ else
+ out_be32(priv->regs_win + RIO_GCCSR,
+ RIO_PORT_GEN_MASTER);
+
+ priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ + ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET :
+ RIO_ATMU_REGS_PORT2_OFFSET));
+
+ priv->maint_atmu_regs = priv->atmu_regs + 1;
+ priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *)
+ (priv->regs_win +
+ ((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET :
+ RIO_INB_ATMU_REGS_PORT2_OFFSET));
+
+ /* Set to receive packets with any dest ID */
+ out_be32((priv->regs_win + RIO_ISR_AACR + i*0x80),
+ RIO_ISR_AACR_AA);
+
+ /* Configure maintenance transaction window */
+ out_be32(&priv->maint_atmu_regs->rowbar,
+ port->iores.start >> 12);
+ out_be32(&priv->maint_atmu_regs->rowar,
+ 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
+
+ priv->maint_win = ioremap(port->iores.start,
+ RIO_MAINT_WIN_SIZE);
+
+ rio_law_start = range_start;
+
+ fsl_rio_setup_rmu(port, rmu_np[i]);
+ fsl_rio_inbound_mem_init(priv);
+
+ dbell->mport[i] = port;
+ pw->mport[i] = port;
+
+ if (rio_register_mport(port)) {
+ release_resource(&port->iores);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ active_ports++;
+ }
+
+ if (!active_ports) {
+ rc = -ENOLINK;
+ goto err;
+ }
+
+ fsl_rio_doorbell_init(dbell);
+ fsl_rio_port_write_init(pw);
+
+ return 0;
+err:
+ kfree(pw);
+ pw = NULL;
+err_pw:
+ kfree(dbell);
+ dbell = NULL;
+err_dbell:
+ iounmap(rmu_regs_win);
+ rmu_regs_win = NULL;
+err_rmu:
+ kfree(ops);
+err_ops:
+ iounmap(rio_regs_win);
+ rio_regs_win = NULL;
+err_rio_regs:
+ return rc;
+}
+
+/* The probe function for RapidIO peer-to-peer network.
+ */
+static int fsl_of_rio_rpn_probe(struct platform_device *dev)
+{
+ printk(KERN_INFO "Setting up RapidIO peer-to-peer network %pOF\n",
+ dev->dev.of_node);
+
+ return fsl_rio_setup(dev);
+};
+
+static const struct of_device_id fsl_of_rio_rpn_ids[] = {
+ {
+ .compatible = "fsl,srio",
+ },
+ {},
+};
+
+static struct platform_driver fsl_of_rio_rpn_driver = {
+ .driver = {
+ .name = "fsl-of-rio",
+ .of_match_table = fsl_of_rio_rpn_ids,
+ },
+ .probe = fsl_of_rio_rpn_probe,
+};
+
+static __init int fsl_of_rio_rpn_init(void)
+{
+ return platform_driver_register(&fsl_of_rio_rpn_driver);
+}
+
+subsys_initcall(fsl_of_rio_rpn_init);