v4.19.13 snapshot.
diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
new file mode 100644
index 0000000..9d28ab1
--- /dev/null
+++ b/arch/openrisc/kernel/setup.c
@@ -0,0 +1,413 @@
+/*
+ * OpenRISC setup.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others. All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/initrd.h>
+#include <linux/of_fdt.h>
+#include <linux/of.h>
+#include <linux/memblock.h>
+#include <linux/device.h>
+
+#include <asm/sections.h>
+#include <asm/segment.h>
+#include <asm/pgtable.h>
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/cpuinfo.h>
+#include <asm/delay.h>
+
+#include "vmlinux.h"
+
+static void __init setup_memory(void)
+{
+ unsigned long ram_start_pfn;
+ unsigned long ram_end_pfn;
+ phys_addr_t memory_start, memory_end;
+ struct memblock_region *region;
+
+ memory_end = memory_start = 0;
+
+ /* Find main memory where is the kernel, we assume its the only one */
+ for_each_memblock(memory, region) {
+ memory_start = region->base;
+ memory_end = region->base + region->size;
+ printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
+ memory_start, memory_end);
+ }
+
+ if (!memory_end) {
+ panic("No memory!");
+ }
+
+ ram_start_pfn = PFN_UP(memory_start);
+ ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
+
+ /* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
+ min_low_pfn = ram_start_pfn;
+ max_low_pfn = ram_end_pfn;
+ max_pfn = ram_end_pfn;
+
+ /*
+ * initialize the boot-time allocator (with low memory only).
+ *
+ * This makes the memory from the end of the kernel to the end of
+ * RAM usable.
+ */
+ memblock_reserve(__pa(_stext), _end - _stext);
+
+ early_init_fdt_reserve_self();
+ early_init_fdt_scan_reserved_mem();
+
+ memblock_dump_all();
+}
+
+struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS];
+
+static void print_cpuinfo(void)
+{
+ unsigned long upr = mfspr(SPR_UPR);
+ unsigned long vr = mfspr(SPR_VR);
+ unsigned int version;
+ unsigned int revision;
+ struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
+
+ version = (vr & SPR_VR_VER) >> 24;
+ revision = (vr & SPR_VR_REV);
+
+ printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
+ version, revision, cpuinfo->clock_frequency / 1000000);
+
+ if (!(upr & SPR_UPR_UP)) {
+ printk(KERN_INFO
+ "-- no UPR register... unable to detect configuration\n");
+ return;
+ }
+
+ if (upr & SPR_UPR_DCP)
+ printk(KERN_INFO
+ "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
+ cpuinfo->dcache_size, cpuinfo->dcache_block_size,
+ cpuinfo->dcache_ways);
+ else
+ printk(KERN_INFO "-- dcache disabled\n");
+ if (upr & SPR_UPR_ICP)
+ printk(KERN_INFO
+ "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
+ cpuinfo->icache_size, cpuinfo->icache_block_size,
+ cpuinfo->icache_ways);
+ else
+ printk(KERN_INFO "-- icache disabled\n");
+
+ if (upr & SPR_UPR_DMP)
+ printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
+ 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
+ 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
+ if (upr & SPR_UPR_IMP)
+ printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
+ 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
+ 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
+
+ printk(KERN_INFO "-- additional features:\n");
+ if (upr & SPR_UPR_DUP)
+ printk(KERN_INFO "-- debug unit\n");
+ if (upr & SPR_UPR_PCUP)
+ printk(KERN_INFO "-- performance counters\n");
+ if (upr & SPR_UPR_PMP)
+ printk(KERN_INFO "-- power management\n");
+ if (upr & SPR_UPR_PICP)
+ printk(KERN_INFO "-- PIC\n");
+ if (upr & SPR_UPR_TTP)
+ printk(KERN_INFO "-- timer\n");
+ if (upr & SPR_UPR_CUP)
+ printk(KERN_INFO "-- custom unit(s)\n");
+}
+
+static struct device_node *setup_find_cpu_node(int cpu)
+{
+ u32 hwid;
+ struct device_node *cpun;
+ struct device_node *cpus = of_find_node_by_path("/cpus");
+
+ for_each_available_child_of_node(cpus, cpun) {
+ if (of_property_read_u32(cpun, "reg", &hwid))
+ continue;
+ if (hwid == cpu)
+ return cpun;
+ }
+
+ return NULL;
+}
+
+void __init setup_cpuinfo(void)
+{
+ struct device_node *cpu;
+ unsigned long iccfgr, dccfgr;
+ unsigned long cache_set_size;
+ int cpu_id = smp_processor_id();
+ struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu_id];
+
+ cpu = setup_find_cpu_node(cpu_id);
+ if (!cpu)
+ panic("Couldn't find CPU%d in device tree...\n", cpu_id);
+
+ iccfgr = mfspr(SPR_ICCFGR);
+ cpuinfo->icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
+ cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
+ cpuinfo->icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
+ cpuinfo->icache_size =
+ cache_set_size * cpuinfo->icache_ways * cpuinfo->icache_block_size;
+
+ dccfgr = mfspr(SPR_DCCFGR);
+ cpuinfo->dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
+ cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
+ cpuinfo->dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
+ cpuinfo->dcache_size =
+ cache_set_size * cpuinfo->dcache_ways * cpuinfo->dcache_block_size;
+
+ if (of_property_read_u32(cpu, "clock-frequency",
+ &cpuinfo->clock_frequency)) {
+ printk(KERN_WARNING
+ "Device tree missing CPU 'clock-frequency' parameter."
+ "Assuming frequency 25MHZ"
+ "This is probably not what you want.");
+ }
+
+ cpuinfo->coreid = mfspr(SPR_COREID);
+
+ of_node_put(cpu);
+
+ print_cpuinfo();
+}
+
+/**
+ * or32_early_setup
+ *
+ * Handles the pointer to the device tree that this kernel is to use
+ * for establishing the available platform devices.
+ *
+ * Falls back on built-in device tree in case null pointer is passed.
+ */
+
+void __init or32_early_setup(void *fdt)
+{
+ if (fdt)
+ pr_info("FDT at %p\n", fdt);
+ else {
+ fdt = __dtb_start;
+ pr_info("Compiled-in FDT at %p\n", fdt);
+ }
+ early_init_devtree(fdt);
+}
+
+static inline unsigned long extract_value_bits(unsigned long reg,
+ short bit_nr, short width)
+{
+ return (reg >> bit_nr) & (0 << width);
+}
+
+static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
+{
+ while (!(mask & 0x1)) {
+ reg = reg >> 1;
+ mask = mask >> 1;
+ }
+ return mask & reg;
+}
+
+void __init detect_unit_config(unsigned long upr, unsigned long mask,
+ char *text, void (*func) (void))
+{
+ if (text != NULL)
+ printk("%s", text);
+
+ if (upr & mask) {
+ if (func != NULL)
+ func();
+ else
+ printk("present\n");
+ } else
+ printk("not present\n");
+}
+
+/*
+ * calibrate_delay
+ *
+ * Lightweight calibrate_delay implementation that calculates loops_per_jiffy
+ * from the clock frequency passed in via the device tree
+ *
+ */
+
+void calibrate_delay(void)
+{
+ const int *val;
+ struct device_node *cpu = setup_find_cpu_node(smp_processor_id());
+
+ val = of_get_property(cpu, "clock-frequency", NULL);
+ if (!val)
+ panic("no cpu 'clock-frequency' parameter in device tree");
+ loops_per_jiffy = *val / HZ;
+ pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
+ loops_per_jiffy / (500000 / HZ),
+ (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+ unflatten_and_copy_device_tree();
+
+ setup_cpuinfo();
+
+#ifdef CONFIG_SMP
+ smp_init_cpus();
+#endif
+
+ /* process 1's initial memory region is the kernel code/data */
+ init_mm.start_code = (unsigned long)_stext;
+ init_mm.end_code = (unsigned long)_etext;
+ init_mm.end_data = (unsigned long)_edata;
+ init_mm.brk = (unsigned long)_end;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ initrd_start = (unsigned long)&__initrd_start;
+ initrd_end = (unsigned long)&__initrd_end;
+ if (initrd_start == initrd_end) {
+ initrd_start = 0;
+ initrd_end = 0;
+ }
+ initrd_below_start_ok = 1;
+#endif
+
+ /* setup memblock allocator */
+ setup_memory();
+
+ /* paging_init() sets up the MMU and marks all pages as reserved */
+ paging_init();
+
+#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
+ if (!conswitchp)
+ conswitchp = &dummy_con;
+#endif
+
+ *cmdline_p = boot_command_line;
+
+ printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
+}
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ unsigned int vr, cpucfgr;
+ unsigned int avr;
+ unsigned int version;
+ struct cpuinfo_or1k *cpuinfo = v;
+
+ vr = mfspr(SPR_VR);
+ cpucfgr = mfspr(SPR_CPUCFGR);
+
+#ifdef CONFIG_SMP
+ seq_printf(m, "processor\t\t: %d\n", cpuinfo->coreid);
+#endif
+ if (vr & SPR_VR_UVRP) {
+ vr = mfspr(SPR_VR2);
+ version = vr & SPR_VR2_VER;
+ avr = mfspr(SPR_AVR);
+ seq_printf(m, "cpu architecture\t: "
+ "OpenRISC 1000 (%d.%d-rev%d)\n",
+ (avr >> 24) & 0xff,
+ (avr >> 16) & 0xff,
+ (avr >> 8) & 0xff);
+ seq_printf(m, "cpu implementation id\t: 0x%x\n",
+ (vr & SPR_VR2_CPUID) >> 24);
+ seq_printf(m, "cpu version\t\t: 0x%x\n", version);
+ } else {
+ version = (vr & SPR_VR_VER) >> 24;
+ seq_printf(m, "cpu\t\t\t: OpenRISC-%x\n", version);
+ seq_printf(m, "revision\t\t: %d\n", vr & SPR_VR_REV);
+ }
+ seq_printf(m, "frequency\t\t: %ld\n", loops_per_jiffy * HZ);
+ seq_printf(m, "dcache size\t\t: %d bytes\n", cpuinfo->dcache_size);
+ seq_printf(m, "dcache block size\t: %d bytes\n",
+ cpuinfo->dcache_block_size);
+ seq_printf(m, "dcache ways\t\t: %d\n", cpuinfo->dcache_ways);
+ seq_printf(m, "icache size\t\t: %d bytes\n", cpuinfo->icache_size);
+ seq_printf(m, "icache block size\t: %d bytes\n",
+ cpuinfo->icache_block_size);
+ seq_printf(m, "icache ways\t\t: %d\n", cpuinfo->icache_ways);
+ seq_printf(m, "immu\t\t\t: %d entries, %lu ways\n",
+ 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
+ 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
+ seq_printf(m, "dmmu\t\t\t: %d entries, %lu ways\n",
+ 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
+ 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
+ seq_printf(m, "bogomips\t\t: %lu.%02lu\n",
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100);
+
+ seq_puts(m, "features\t\t: ");
+ seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB32S ? "orbis32" : "");
+ seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB64S ? "orbis64" : "");
+ seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF32S ? "orfpx32" : "");
+ seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF64S ? "orfpx64" : "");
+ seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OV64S ? "orvdx64" : "");
+ seq_puts(m, "\n");
+
+ seq_puts(m, "\n");
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ *pos = cpumask_next(*pos - 1, cpu_online_mask);
+ if ((*pos) < nr_cpu_ids)
+ return &cpuinfo_or1k[*pos];
+ return NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};