v4.19.13 snapshot.
diff --git a/arch/mips/rb532/Makefile b/arch/mips/rb532/Makefile
new file mode 100644
index 0000000..8186afc
--- /dev/null
+++ b/arch/mips/rb532/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the RB532 board specific parts of the kernel
+#
+
+obj-$(CONFIG_SERIAL_8250_CONSOLE) += serial.o
+
+obj-y += irq.o time.o setup.o prom.o gpio.o devices.o
diff --git a/arch/mips/rb532/Platform b/arch/mips/rb532/Platform
new file mode 100644
index 0000000..aeec45a
--- /dev/null
+++ b/arch/mips/rb532/Platform
@@ -0,0 +1,7 @@
+#
+# Routerboard 532
+#
+platform-$(CONFIG_MIKROTIK_RB532) += rb532/
+cflags-$(CONFIG_MIKROTIK_RB532) += \
+ -I$(srctree)/arch/mips/include/asm/mach-rc32434
+load-$(CONFIG_MIKROTIK_RB532) += 0xffffffff80101000
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
new file mode 100644
index 0000000..354d258
--- /dev/null
+++ b/arch/mips/rb532/devices.c
@@ -0,0 +1,329 @@
+/*
+ * RouterBoard 500 Platform devices
+ *
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/serial_8250.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/dma.h>
+#include <asm/mach-rc32434/dma_v.h>
+#include <asm/mach-rc32434/eth.h>
+#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/integ.h>
+#include <asm/mach-rc32434/gpio.h>
+#include <asm/mach-rc32434/irq.h>
+
+#define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
+#define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+
+extern unsigned int idt_cpu_freq;
+
+static struct mpmc_device dev3;
+
+void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev3.lock, flags);
+
+ dev3.state = (dev3.state | or_mask) & ~nand_mask;
+ writeb(dev3.state, dev3.base);
+
+ spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_latch_u5);
+
+unsigned char get_latch_u5(void)
+{
+ return dev3.state;
+}
+EXPORT_SYMBOL(get_latch_u5);
+
+static struct resource korina_dev0_res[] = {
+ {
+ .name = "korina_regs",
+ .start = ETH0_BASE_ADDR,
+ .end = ETH0_BASE_ADDR + sizeof(struct eth_regs),
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "korina_rx",
+ .start = ETH0_DMA_RX_IRQ,
+ .end = ETH0_DMA_RX_IRQ,
+ .flags = IORESOURCE_IRQ
+ }, {
+ .name = "korina_tx",
+ .start = ETH0_DMA_TX_IRQ,
+ .end = ETH0_DMA_TX_IRQ,
+ .flags = IORESOURCE_IRQ
+ }, {
+ .name = "korina_ovr",
+ .start = ETH0_RX_OVR_IRQ,
+ .end = ETH0_RX_OVR_IRQ,
+ .flags = IORESOURCE_IRQ
+ }, {
+ .name = "korina_und",
+ .start = ETH0_TX_UND_IRQ,
+ .end = ETH0_TX_UND_IRQ,
+ .flags = IORESOURCE_IRQ
+ }, {
+ .name = "korina_dma_rx",
+ .start = ETH0_RX_DMA_ADDR,
+ .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "korina_dma_tx",
+ .start = ETH0_TX_DMA_ADDR,
+ .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct korina_device korina_dev0_data = {
+ .name = "korina0",
+ .mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
+};
+
+static struct platform_device korina_dev0 = {
+ .id = -1,
+ .name = "korina",
+ .resource = korina_dev0_res,
+ .num_resources = ARRAY_SIZE(korina_dev0_res),
+};
+
+static struct resource cf_slot0_res[] = {
+ {
+ .name = "cf_membase",
+ .flags = IORESOURCE_MEM
+ }, {
+ .name = "cf_irq",
+ .start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */
+ .end = (8 + 4 * 32 + CF_GPIO_NUM),
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct cf_device cf_slot0_data = {
+ .gpio_pin = CF_GPIO_NUM
+};
+
+static struct platform_device cf_slot0 = {
+ .id = -1,
+ .name = "pata-rb532-cf",
+ .dev.platform_data = &cf_slot0_data,
+ .resource = cf_slot0_res,
+ .num_resources = ARRAY_SIZE(cf_slot0_res),
+};
+
+/* Resources and device for NAND */
+static int rb532_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(GPIO_RDY);
+}
+
+static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ unsigned char orbits, nandbits;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ orbits = (ctrl & NAND_CLE) << 1;
+ orbits |= (ctrl & NAND_ALE) >> 1;
+
+ nandbits = (~ctrl & NAND_CLE) << 1;
+ nandbits |= (~ctrl & NAND_ALE) >> 1;
+
+ set_latch_u5(orbits, nandbits);
+ }
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
+}
+
+static struct resource nand_slot0_res[] = {
+ [0] = {
+ .name = "nand_membase",
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_nand_data rb532_nand_data = {
+ .ctrl.dev_ready = rb532_dev_ready,
+ .ctrl.cmd_ctrl = rb532_cmd_ctrl,
+};
+
+static struct platform_device nand_slot0 = {
+ .name = "gen_nand",
+ .id = -1,
+ .resource = nand_slot0_res,
+ .num_resources = ARRAY_SIZE(nand_slot0_res),
+ .dev.platform_data = &rb532_nand_data,
+};
+
+static struct mtd_partition rb532_partition_info[] = {
+ {
+ .name = "Routerboard NAND boot",
+ .offset = 0,
+ .size = 4 * 1024 * 1024,
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct platform_device rb532_led = {
+ .name = "rb532-led",
+ .id = -1,
+};
+
+static struct platform_device rb532_button = {
+ .name = "rb532-button",
+ .id = -1,
+};
+
+static struct resource rb532_wdt_res[] = {
+ {
+ .name = "rb532_wdt_res",
+ .start = INTEG0_BASE_ADDR,
+ .end = INTEG0_BASE_ADDR + sizeof(struct integ),
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device rb532_wdt = {
+ .name = "rc32434_wdt",
+ .id = -1,
+ .resource = rb532_wdt_res,
+ .num_resources = ARRAY_SIZE(rb532_wdt_res),
+};
+
+static struct plat_serial8250_port rb532_uart_res[] = {
+ {
+ .type = PORT_16550A,
+ .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
+ .irq = UART0_IRQ,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF,
+ },
+ {
+ .flags = 0,
+ }
+};
+
+static struct platform_device rb532_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = &rb532_uart_res,
+};
+
+static struct platform_device *rb532_devs[] = {
+ &korina_dev0,
+ &nand_slot0,
+ &cf_slot0,
+ &rb532_led,
+ &rb532_button,
+ &rb532_uart,
+ &rb532_wdt
+};
+
+/* NAND definitions */
+#define NAND_CHIP_DELAY 25
+
+static void __init rb532_nand_setup(void)
+{
+ switch (mips_machtype) {
+ case MACH_MIKROTIK_RB532A:
+ set_latch_u5(LO_FOFF | LO_CEX,
+ LO_ULED | LO_ALE | LO_CLE | LO_WPX);
+ break;
+ default:
+ set_latch_u5(LO_WPX | LO_FOFF | LO_CEX,
+ LO_ULED | LO_ALE | LO_CLE);
+ break;
+ }
+
+ /* Setup NAND specific settings */
+ rb532_nand_data.chip.nr_chips = 1;
+ rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
+ rb532_nand_data.chip.partitions = rb532_partition_info;
+ rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+}
+
+
+static int __init plat_setup_devices(void)
+{
+ /* Look for the CF card reader */
+ if (!readl(IDT434_REG_BASE + DEV1MASK))
+ rb532_devs[2] = NULL; /* disable cf_slot0 at index 2 */
+ else {
+ cf_slot0_res[0].start =
+ readl(IDT434_REG_BASE + DEV1BASE);
+ cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
+ }
+
+ /* Read the NAND resources from the device controller */
+ nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE);
+ nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
+
+ /* Read and map device controller 3 */
+ dev3.base = ioremap_nocache(readl(IDT434_REG_BASE + DEV3BASE), 1);
+
+ if (!dev3.base) {
+ printk(KERN_ERR "rb532: cannot remap device controller 3\n");
+ return -ENXIO;
+ }
+
+ /* Initialise the NAND device */
+ rb532_nand_setup();
+
+ /* set the uart clock to the current cpu frequency */
+ rb532_uart_res[0].uartclk = idt_cpu_freq;
+
+ dev_set_drvdata(&korina_dev0.dev, &korina_dev0_data);
+
+ return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
+}
+
+#ifdef CONFIG_NET
+
+static int __init setup_kmac(char *s)
+{
+ printk(KERN_INFO "korina mac = %s\n", s);
+ if (!mac_pton(s, korina_dev0_data.mac)) {
+ printk(KERN_ERR "Invalid mac\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+__setup("kmac=", setup_kmac);
+
+#endif /* CONFIG_NET */
+
+arch_initcall(plat_setup_devices);
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
new file mode 100644
index 0000000..fdc704a
--- /dev/null
+++ b/arch/mips/rb532/gpio.c
@@ -0,0 +1,207 @@
+/*
+ * Miscellaneous functions for IDT EB434 board
+ *
+ * Copyright 2004 IDT Inc. (rischelp@idt.com)
+ * Copyright 2006 Phil Sutter <n0-1@freewrt.org>
+ * Copyright 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/export.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
+
+#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/gpio.h>
+
+struct rb532_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase;
+};
+
+static struct resource rb532_gpio_reg0_res[] = {
+ {
+ .name = "gpio_reg0",
+ .start = REGBASE + GPIOBASE,
+ .end = REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+/* rb532_set_bit - sanely set a bit
+ *
+ * bitval: new value for the bit
+ * offset: bit index in the 4 byte address range
+ * ioaddr: 4 byte aligned address being altered
+ */
+static inline void rb532_set_bit(unsigned bitval,
+ unsigned offset, void __iomem *ioaddr)
+{
+ unsigned long flags;
+ u32 val;
+
+ local_irq_save(flags);
+
+ val = readl(ioaddr);
+ val &= ~(!bitval << offset); /* unset bit if bitval == 0 */
+ val |= (!!bitval << offset); /* set bit if bitval == 1 */
+ writel(val, ioaddr);
+
+ local_irq_restore(flags);
+}
+
+/* rb532_get_bit - read a bit
+ *
+ * returns the boolean state of the bit, which may be > 1
+ */
+static inline int rb532_get_bit(unsigned offset, void __iomem *ioaddr)
+{
+ return readl(ioaddr) & (1 << offset);
+}
+
+/*
+ * Return GPIO level */
+static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct rb532_gpio_chip *gpch;
+
+ gpch = gpiochip_get_data(chip);
+ return !!rb532_get_bit(offset, gpch->regbase + GPIOD);
+}
+
+/*
+ * Set output GPIO level
+ */
+static void rb532_gpio_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct rb532_gpio_chip *gpch;
+
+ gpch = gpiochip_get_data(chip);
+ rb532_set_bit(value, offset, gpch->regbase + GPIOD);
+}
+
+/*
+ * Set GPIO direction to input
+ */
+static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct rb532_gpio_chip *gpch;
+
+ gpch = gpiochip_get_data(chip);
+
+ /* disable alternate function in case it's set */
+ rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
+
+ rb532_set_bit(0, offset, gpch->regbase + GPIOCFG);
+ return 0;
+}
+
+/*
+ * Set GPIO direction to output
+ */
+static int rb532_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct rb532_gpio_chip *gpch;
+
+ gpch = gpiochip_get_data(chip);
+
+ /* disable alternate function in case it's set */
+ rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
+
+ /* set the initial output value */
+ rb532_set_bit(value, offset, gpch->regbase + GPIOD);
+
+ rb532_set_bit(1, offset, gpch->regbase + GPIOCFG);
+ return 0;
+}
+
+static int rb532_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+ return 8 + 4 * 32 + gpio;
+}
+
+static struct rb532_gpio_chip rb532_gpio_chip[] = {
+ [0] = {
+ .chip = {
+ .label = "gpio0",
+ .direction_input = rb532_gpio_direction_input,
+ .direction_output = rb532_gpio_direction_output,
+ .get = rb532_gpio_get,
+ .set = rb532_gpio_set,
+ .to_irq = rb532_gpio_to_irq,
+ .base = 0,
+ .ngpio = 32,
+ },
+ },
+};
+
+/*
+ * Set GPIO interrupt level
+ */
+void rb532_gpio_set_ilevel(int bit, unsigned gpio)
+{
+ rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOILEVEL);
+}
+EXPORT_SYMBOL(rb532_gpio_set_ilevel);
+
+/*
+ * Set GPIO interrupt status
+ */
+void rb532_gpio_set_istat(int bit, unsigned gpio)
+{
+ rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOISTAT);
+}
+EXPORT_SYMBOL(rb532_gpio_set_istat);
+
+/*
+ * Configure GPIO alternate function
+ */
+void rb532_gpio_set_func(unsigned gpio)
+{
+ rb532_set_bit(1, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
+}
+EXPORT_SYMBOL(rb532_gpio_set_func);
+
+int __init rb532_gpio_init(void)
+{
+ struct resource *r;
+
+ r = rb532_gpio_reg0_res;
+ rb532_gpio_chip->regbase = ioremap_nocache(r->start, resource_size(r));
+
+ if (!rb532_gpio_chip->regbase) {
+ printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
+ return -ENXIO;
+ }
+
+ /* Register our GPIO chip */
+ gpiochip_add_data(&rb532_gpio_chip->chip, rb532_gpio_chip);
+
+ return 0;
+}
+arch_initcall(rb532_gpio_init);
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
new file mode 100644
index 0000000..25cc250
--- /dev/null
+++ b/arch/mips/rb532/irq.c
@@ -0,0 +1,234 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * stevel@mvista.com or source@mvista.com
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+
+#include <asm/mach-rc32434/irq.h>
+#include <asm/mach-rc32434/gpio.h>
+
+struct intr_group {
+ u32 mask; /* mask of valid bits in pending/mask registers */
+ volatile u32 *base_addr;
+};
+
+#define RC32434_NR_IRQS (GROUP4_IRQ_BASE + 32)
+
+#if (NR_IRQS < RC32434_NR_IRQS)
+#error Too little irqs defined. Did you override <asm/irq.h> ?
+#endif
+
+static const struct intr_group intr_group[NUM_INTR_GROUPS] = {
+ {
+ .mask = 0x0000efff,
+ .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET)},
+ {
+ .mask = 0x00001fff,
+ .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET)},
+ {
+ .mask = 0x00000007,
+ .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET)},
+ {
+ .mask = 0x0003ffff,
+ .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET)},
+ {
+ .mask = 0xffffffff,
+ .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET)}
+};
+
+#define READ_PEND(base) (*(base))
+#define READ_MASK(base) (*(base + 2))
+#define WRITE_MASK(base, val) (*(base + 2) = (val))
+
+static inline int irq_to_group(unsigned int irq_nr)
+{
+ return (irq_nr - GROUP0_IRQ_BASE) >> 5;
+}
+
+static inline int group_to_ip(unsigned int group)
+{
+ return group + 2;
+}
+
+static inline void enable_local_irq(unsigned int ip)
+{
+ int ipnum = 0x100 << ip;
+
+ set_c0_status(ipnum);
+}
+
+static inline void disable_local_irq(unsigned int ip)
+{
+ int ipnum = 0x100 << ip;
+
+ clear_c0_status(ipnum);
+}
+
+static inline void ack_local_irq(unsigned int ip)
+{
+ int ipnum = 0x100 << ip;
+
+ clear_c0_cause(ipnum);
+}
+
+static void rb532_enable_irq(struct irq_data *d)
+{
+ unsigned int group, intr_bit, irq_nr = d->irq;
+ int ip = irq_nr - GROUP0_IRQ_BASE;
+ volatile unsigned int *addr;
+
+ if (ip < 0)
+ enable_local_irq(irq_nr);
+ else {
+ group = ip >> 5;
+
+ ip &= (1 << 5) - 1;
+ intr_bit = 1 << ip;
+
+ enable_local_irq(group_to_ip(group));
+
+ addr = intr_group[group].base_addr;
+ WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
+ }
+}
+
+static void rb532_disable_irq(struct irq_data *d)
+{
+ unsigned int group, intr_bit, mask, irq_nr = d->irq;
+ int ip = irq_nr - GROUP0_IRQ_BASE;
+ volatile unsigned int *addr;
+
+ if (ip < 0) {
+ disable_local_irq(irq_nr);
+ } else {
+ group = ip >> 5;
+
+ ip &= (1 << 5) - 1;
+ intr_bit = 1 << ip;
+ addr = intr_group[group].base_addr;
+ mask = READ_MASK(addr);
+ mask |= intr_bit;
+ WRITE_MASK(addr, mask);
+
+ /* There is a maximum of 14 GPIO interrupts */
+ if (group == GPIO_MAPPED_IRQ_GROUP && irq_nr <= (GROUP4_IRQ_BASE + 13))
+ rb532_gpio_set_istat(0, irq_nr - GPIO_MAPPED_IRQ_BASE);
+
+ /*
+ * if there are no more interrupts enabled in this
+ * group, disable corresponding IP
+ */
+ if (mask == intr_group[group].mask)
+ disable_local_irq(group_to_ip(group));
+ }
+}
+
+static void rb532_mask_and_ack_irq(struct irq_data *d)
+{
+ rb532_disable_irq(d);
+ ack_local_irq(group_to_ip(irq_to_group(d->irq)));
+}
+
+static int rb532_set_type(struct irq_data *d, unsigned type)
+{
+ int gpio = d->irq - GPIO_MAPPED_IRQ_BASE;
+ int group = irq_to_group(d->irq);
+
+ if (group != GPIO_MAPPED_IRQ_GROUP || d->irq > (GROUP4_IRQ_BASE + 13))
+ return (type == IRQ_TYPE_LEVEL_HIGH) ? 0 : -EINVAL;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ rb532_gpio_set_ilevel(1, gpio);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ rb532_gpio_set_ilevel(0, gpio);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct irq_chip rc32434_irq_type = {
+ .name = "RB532",
+ .irq_ack = rb532_disable_irq,
+ .irq_mask = rb532_disable_irq,
+ .irq_mask_ack = rb532_mask_and_ack_irq,
+ .irq_unmask = rb532_enable_irq,
+ .irq_set_type = rb532_set_type,
+};
+
+void __init arch_init_irq(void)
+{
+ int i;
+
+ pr_info("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
+
+ for (i = 0; i < RC32434_NR_IRQS; i++)
+ irq_set_chip_and_handler(i, &rc32434_irq_type,
+ handle_level_irq);
+}
+
+/* Main Interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int ip, pend, group;
+ volatile unsigned int *addr;
+ unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+ if (cp0_cause & CAUSEF_IP7) {
+ do_IRQ(7);
+ } else {
+ ip = (cp0_cause & 0x7c00);
+ if (ip) {
+ group = 21 + (fls(ip) - 32);
+
+ addr = intr_group[group].base_addr;
+
+ pend = READ_PEND(addr);
+ pend &= ~READ_MASK(addr); /* only unmasked interrupts */
+ pend = 39 + (fls(pend) - 32);
+ do_IRQ((group << 5) + pend);
+ }
+ }
+}
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
new file mode 100644
index 0000000..6484e4a
--- /dev/null
+++ b/arch/mips/rb532/prom.c
@@ -0,0 +1,145 @@
+/*
+ * RouterBoard 500 specific prom routines
+ *
+ * Copyright (C) 2003, Peter Sadik <peter.sadik@idt.com>
+ * Copyright (C) 2005-2006, P.Christeas <p_christ@hol.gr>
+ * Copyright (C) 2007, Gabor Juhos <juhosg@openwrt.org>
+ * Felix Fietkau <nbd@openwrt.org>
+ * Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/export.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mach-rc32434/ddr.h>
+#include <asm/mach-rc32434/prom.h>
+
+unsigned int idt_cpu_freq = 132000000;
+EXPORT_SYMBOL(idt_cpu_freq);
+
+static struct resource ddr_reg[] = {
+ {
+ .name = "ddr-reg",
+ .start = DDR0_PHYS_ADDR,
+ .end = DDR0_PHYS_ADDR + sizeof(struct ddr_ram),
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+void __init prom_free_prom_memory(void)
+{
+ /* No prom memory to free */
+}
+
+static inline int match_tag(char *arg, const char *tag)
+{
+ return strncmp(arg, tag, strlen(tag)) == 0;
+}
+
+static inline unsigned long tag2ul(char *arg, const char *tag)
+{
+ char *num;
+
+ num = arg + strlen(tag);
+ return simple_strtoul(num, 0, 10);
+}
+
+void __init prom_setup_cmdline(void)
+{
+ static char cmd_line[COMMAND_LINE_SIZE] __initdata;
+ char *cp, *board;
+ int prom_argc;
+ char **prom_argv;
+ int i;
+
+ prom_argc = fw_arg0;
+ prom_argv = (char **) fw_arg1;
+
+ cp = cmd_line;
+ /* Note: it is common that parameters start
+ * at argv[1] and not argv[0],
+ * however, our elf loader starts at [0] */
+ for (i = 0; i < prom_argc; i++) {
+ if (match_tag(prom_argv[i], FREQ_TAG)) {
+ idt_cpu_freq = tag2ul(prom_argv[i], FREQ_TAG);
+ continue;
+ }
+#ifdef IGNORE_CMDLINE_MEM
+ /* parses out the "mem=xx" arg */
+ if (match_tag(prom_argv[i], MEM_TAG))
+ continue;
+#endif
+ if (i > 0)
+ *(cp++) = ' ';
+ if (match_tag(prom_argv[i], BOARD_TAG)) {
+ board = prom_argv[i] + strlen(BOARD_TAG);
+
+ if (match_tag(board, BOARD_RB532A))
+ mips_machtype = MACH_MIKROTIK_RB532A;
+ else
+ mips_machtype = MACH_MIKROTIK_RB532;
+ }
+
+ strcpy(cp, prom_argv[i]);
+ cp += strlen(prom_argv[i]);
+ }
+ *(cp++) = ' ';
+
+ i = strlen(arcs_cmdline);
+ if (i > 0) {
+ *(cp++) = ' ';
+ strcpy(cp, arcs_cmdline);
+ cp += strlen(arcs_cmdline);
+ }
+ cmd_line[COMMAND_LINE_SIZE - 1] = '\0';
+
+ strcpy(arcs_cmdline, cmd_line);
+}
+
+void __init prom_init(void)
+{
+ struct ddr_ram __iomem *ddr;
+ phys_addr_t memsize;
+ phys_addr_t ddrbase;
+
+ ddr = ioremap_nocache(ddr_reg[0].start,
+ ddr_reg[0].end - ddr_reg[0].start);
+
+ if (!ddr) {
+ printk(KERN_ERR "Unable to remap DDR register\n");
+ return;
+ }
+
+ ddrbase = (phys_addr_t)&ddr->ddrbase;
+ memsize = (phys_addr_t)&ddr->ddrmask;
+ memsize = 0 - memsize;
+
+ prom_setup_cmdline();
+
+ /* give all RAM to boot allocator,
+ * except for the first 0x400 and the last 0x200 bytes */
+ add_memory_region(ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
new file mode 100644
index 0000000..7048254
--- /dev/null
+++ b/arch/mips/rb532/serial.c
@@ -0,0 +1,54 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Serial port initialisation.
+ *
+ * Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/irq.h>
+
+#include <asm/serial.h>
+#include <asm/mach-rc32434/rb.h>
+
+extern unsigned int idt_cpu_freq;
+
+static struct uart_port rb532_uart = {
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 0,
+ .irq = UART0_IRQ,
+ .iotype = UPIO_MEM,
+ .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
+ .regshift = 2
+};
+
+int __init setup_serial_port(void)
+{
+ rb532_uart.uartclk = idt_cpu_freq;
+
+ return early_serial_setup(&rb532_uart);
+}
+arch_initcall(setup_serial_port);
diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
new file mode 100644
index 0000000..1aa4df1
--- /dev/null
+++ b/arch/mips/rb532/setup.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * setup.c - boot time setup code
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/ioport.h>
+
+#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/pci.h>
+
+struct pci_reg __iomem *pci_reg;
+EXPORT_SYMBOL(pci_reg);
+
+static struct resource pci0_res[] = {
+ {
+ .name = "pci_reg0",
+ .start = PCI0_BASE_ADDR,
+ .end = PCI0_BASE_ADDR + sizeof(struct pci_reg),
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static void rb_machine_restart(char *command)
+{
+ /* just jump to the reset vector */
+ writel(0x80000001, IDT434_REG_BASE + RST);
+ ((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
+}
+
+static void rb_machine_halt(void)
+{
+ for (;;)
+ continue;
+}
+
+void __init plat_mem_setup(void)
+{
+ u32 val;
+
+ _machine_restart = rb_machine_restart;
+ _machine_halt = rb_machine_halt;
+ pm_power_off = rb_machine_halt;
+
+ set_io_port_base(KSEG1);
+
+ pci_reg = ioremap_nocache(pci0_res[0].start,
+ pci0_res[0].end - pci0_res[0].start);
+ if (!pci_reg) {
+ printk(KERN_ERR "Could not remap PCI registers\n");
+ return;
+ }
+
+ val = __raw_readl(&pci_reg->pcic);
+ val &= 0xFFFFFF7;
+ __raw_writel(val, (void *)&pci_reg->pcic);
+
+#ifdef CONFIG_PCI
+ /* Enable PCI interrupts in EPLD Mask register */
+ *epld_mask = 0x0;
+ *(epld_mask + 1) = 0x0;
+#endif
+ write_c0_wired(0);
+}
+
+const char *get_system_type(void)
+{
+ switch (mips_machtype) {
+ case MACH_MIKROTIK_RB532A:
+ return "Mikrotik RB532A";
+ break;
+ default:
+ return "Mikrotik RB532";
+ break;
+ }
+}
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
new file mode 100644
index 0000000..1377d59
--- /dev/null
+++ b/arch/mips/rb532/time.c
@@ -0,0 +1,66 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+
+#include <asm/mipsregs.h>
+#include <asm/time.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+/*
+ * Figure out the r4k offset, the amount to increment the compare
+ * register for each time tick. There is no RTC available.
+ *
+ * The RC32434 counts at half the CPU *core* speed.
+ */
+static unsigned long __init cal_r4koff(void)
+{
+ mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2;
+
+ return mips_hpt_frequency / HZ;
+}
+
+void __init plat_time_init(void)
+{
+ unsigned int est_freq;
+ unsigned long flags, r4k_offset;
+
+ local_irq_save(flags);
+
+ printk(KERN_INFO "calculating r4koff... ");
+ r4k_offset = cal_r4koff();
+ printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+
+ est_freq = 2 * r4k_offset * HZ;
+ est_freq += 5000; /* round */
+ est_freq -= est_freq % 10000;
+ printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
+ (est_freq % 1000000) * 100 / 1000000);
+ local_irq_restore(flags);
+}