v4.19.13 snapshot.
diff --git a/arch/mips/pmcs-msp71xx/msp_usb.c b/arch/mips/pmcs-msp71xx/msp_usb.c
new file mode 100644
index 0000000..c87c5f8
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_usb.c
@@ -0,0 +1,173 @@
+/*
+ * The setup file for USB related hardware on PMC-Sierra MSP processors.
+ *
+ * Copyright 2006 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET)
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mipsregs.h>
+
+#include <msp_regs.h>
+#include <msp_int.h>
+#include <msp_prom.h>
+#include <msp_usb.h>
+
+
+#if defined(CONFIG_USB_EHCI_HCD)
+static struct resource msp_usbhost0_resources[] = {
+ [0] = { /* EHCI-HS operational and capabilities registers */
+ .start = MSP_USB0_HS_START,
+ .end = MSP_USB0_HS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_USB,
+ .end = MSP_INT_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = { /* MSBus-to-AMBA bridge register space */
+ .start = MSP_USB0_MAB_START,
+ .end = MSP_USB0_MAB_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = { /* Identification and general hardware parameters */
+ .start = MSP_USB0_ID_START,
+ .end = MSP_USB0_ID_END,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static u64 msp_usbhost0_dma_mask = 0xffffffffUL;
+
+static struct mspusb_device msp_usbhost0_device = {
+ .dev = {
+ .name = "pmcmsp-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &msp_usbhost0_dma_mask,
+ .coherent_dma_mask = 0xffffffffUL,
+ },
+ .num_resources = ARRAY_SIZE(msp_usbhost0_resources),
+ .resource = msp_usbhost0_resources,
+ },
+};
+#endif /* CONFIG_USB_EHCI_HCD */
+
+#if defined(CONFIG_USB_GADGET)
+static struct resource msp_usbdev0_resources[] = {
+ [0] = { /* EHCI-HS operational and capabilities registers */
+ .start = MSP_USB0_HS_START,
+ .end = MSP_USB0_HS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_USB,
+ .end = MSP_INT_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = { /* MSBus-to-AMBA bridge register space */
+ .start = MSP_USB0_MAB_START,
+ .end = MSP_USB0_MAB_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = { /* Identification and general hardware parameters */
+ .start = MSP_USB0_ID_START,
+ .end = MSP_USB0_ID_END,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static u64 msp_usbdev_dma_mask = 0xffffffffUL;
+
+/* This may need to be converted to a mspusb_device, too. */
+static struct mspusb_device msp_usbdev0_device = {
+ .dev = {
+ .name = "msp71xx_udc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &msp_usbdev_dma_mask,
+ .coherent_dma_mask = 0xffffffffUL,
+ },
+ .num_resources = ARRAY_SIZE(msp_usbdev0_resources),
+ .resource = msp_usbdev0_resources,
+ },
+};
+#endif /* CONFIG_USB_GADGET */
+
+static int __init msp_usb_setup(void)
+{
+ char *strp;
+ char envstr[32];
+ struct platform_device *msp_devs[NUM_USB_DEVS];
+ unsigned int val;
+
+ /* construct environment name usbmode */
+ /* set usbmode <host/device> as pmon environment var */
+ /*
+ * Could this perhaps be integrated into the "features" env var?
+ * Use the features key "U", and follow with "H" for host-mode,
+ * "D" for device-mode. If it works for Ethernet, why not USB...
+ * -- hammtrev, 2007/03/22
+ */
+ snprintf((char *)&envstr[0], sizeof(envstr), "usbmode");
+
+ /* set default host mode */
+ val = 1;
+
+ /* get environment string */
+ strp = prom_getenv((char *)&envstr[0]);
+ if (strp) {
+ /* compare string */
+ if (!strcmp(strp, "device"))
+ val = 0;
+ }
+
+ if (val) {
+#if defined(CONFIG_USB_EHCI_HCD)
+ msp_devs[0] = &msp_usbhost0_device.dev;
+ ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name);
+#else
+ ppfinit("%s: echi_hcd not supported\n", __FILE__);
+#endif /* CONFIG_USB_EHCI_HCD */
+ } else {
+#if defined(CONFIG_USB_GADGET)
+ /* get device mode structure */
+ msp_devs[0] = &msp_usbdev0_device.dev;
+ ppfinit("platform add USB DEVICE done %s.\n"
+ , msp_devs[0]->name);
+#else
+ ppfinit("%s: usb_gadget not supported\n", __FILE__);
+#endif /* CONFIG_USB_GADGET */
+ }
+ /* add device */
+ platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs));
+
+ return 0;
+}
+
+subsys_initcall(msp_usb_setup);
+#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */