v4.19.13 snapshot.
diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile
new file mode 100644
index 0000000..05902bc
--- /dev/null
+++ b/arch/mips/netlogic/xlr/Makefile
@@ -0,0 +1,2 @@
+obj-y += fmn.o fmn-config.o setup.o platform.o platform-flash.o
+obj-$(CONFIG_SMP) += wakeup.o
diff --git a/arch/mips/netlogic/xlr/fmn-config.c b/arch/mips/netlogic/xlr/fmn-config.c
new file mode 100644
index 0000000..c7622c6
--- /dev/null
+++ b/arch/mips/netlogic/xlr/fmn-config.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <asm/cpu-info.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/netlogic/xlr/fmn.h>
+#include <asm/netlogic/xlr/xlr.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+
+struct xlr_board_fmn_config xlr_board_fmn_config;
+
+static void __maybe_unused print_credit_config(struct xlr_fmn_info *fmn_info)
+{
+ int bkt;
+
+ pr_info("Bucket size :\n");
+ pr_info("Station\t: Size\n");
+ for (bkt = 0; bkt < 16; bkt++)
+ pr_info(" %d %d %d %d %d %d %d %d\n",
+ xlr_board_fmn_config.bucket_size[(bkt * 8) + 0],
+ xlr_board_fmn_config.bucket_size[(bkt * 8) + 1],
+ xlr_board_fmn_config.bucket_size[(bkt * 8) + 2],
+ xlr_board_fmn_config.bucket_size[(bkt * 8) + 3],
+ xlr_board_fmn_config.bucket_size[(bkt * 8) + 4],
+ xlr_board_fmn_config.bucket_size[(bkt * 8) + 5],
+ xlr_board_fmn_config.bucket_size[(bkt * 8) + 6],
+ xlr_board_fmn_config.bucket_size[(bkt * 8) + 7]);
+ pr_info("\n");
+
+ pr_info("Credits distribution :\n");
+ pr_info("Station\t: Size\n");
+ for (bkt = 0; bkt < 16; bkt++)
+ pr_info(" %d %d %d %d %d %d %d %d\n",
+ fmn_info->credit_config[(bkt * 8) + 0],
+ fmn_info->credit_config[(bkt * 8) + 1],
+ fmn_info->credit_config[(bkt * 8) + 2],
+ fmn_info->credit_config[(bkt * 8) + 3],
+ fmn_info->credit_config[(bkt * 8) + 4],
+ fmn_info->credit_config[(bkt * 8) + 5],
+ fmn_info->credit_config[(bkt * 8) + 6],
+ fmn_info->credit_config[(bkt * 8) + 7]);
+ pr_info("\n");
+}
+
+static void check_credit_distribution(void)
+{
+ struct xlr_board_fmn_config *cfg = &xlr_board_fmn_config;
+ int bkt, n, total_credits, ncores;
+
+ ncores = hweight32(nlm_current_node()->coremask);
+ for (bkt = 0; bkt < 128; bkt++) {
+ total_credits = 0;
+ for (n = 0; n < ncores; n++)
+ total_credits += cfg->cpu[n].credit_config[bkt];
+ total_credits += cfg->gmac[0].credit_config[bkt];
+ total_credits += cfg->gmac[1].credit_config[bkt];
+ total_credits += cfg->dma.credit_config[bkt];
+ total_credits += cfg->cmp.credit_config[bkt];
+ total_credits += cfg->sae.credit_config[bkt];
+ total_credits += cfg->xgmac[0].credit_config[bkt];
+ total_credits += cfg->xgmac[1].credit_config[bkt];
+ if (total_credits > cfg->bucket_size[bkt])
+ pr_err("ERROR: Bucket %d: credits (%d) > size (%d)\n",
+ bkt, total_credits, cfg->bucket_size[bkt]);
+ }
+ pr_info("Credit distribution complete.\n");
+}
+
+/**
+ * Configure bucket size and credits for a device. 'size' is the size of
+ * the buckets for the device. This size is distributed among all the CPUs
+ * so that all of them can send messages to the device.
+ *
+ * The device is also given 'cpu_credits' to send messages to the CPUs
+ *
+ * @dev_info: FMN information structure for each devices
+ * @start_stn_id: Starting station id of dev_info
+ * @end_stn_id: End station id of dev_info
+ * @num_buckets: Total number of buckets for den_info
+ * @cpu_credits: Allowed credits to cpu for each devices pointing by dev_info
+ * @size: Size of the each buckets in the device station
+ */
+static void setup_fmn_cc(struct xlr_fmn_info *dev_info, int start_stn_id,
+ int end_stn_id, int num_buckets, int cpu_credits, int size)
+{
+ int i, j, num_core, n, credits_per_cpu;
+ struct xlr_fmn_info *cpu = xlr_board_fmn_config.cpu;
+
+ num_core = hweight32(nlm_current_node()->coremask);
+ dev_info->num_buckets = num_buckets;
+ dev_info->start_stn_id = start_stn_id;
+ dev_info->end_stn_id = end_stn_id;
+
+ n = num_core;
+ if (num_core == 3)
+ n = 4;
+
+ for (i = start_stn_id; i <= end_stn_id; i++) {
+ xlr_board_fmn_config.bucket_size[i] = size;
+
+ /* Dividing device credits equally to cpus */
+ credits_per_cpu = size / n;
+ for (j = 0; j < num_core; j++)
+ cpu[j].credit_config[i] = credits_per_cpu;
+
+ /* credits left to distribute */
+ credits_per_cpu = size - (credits_per_cpu * num_core);
+
+ /* distribute the remaining credits (if any), among cores */
+ for (j = 0; (j < num_core) && (credits_per_cpu >= 4); j++) {
+ cpu[j].credit_config[i] += 4;
+ credits_per_cpu -= 4;
+ }
+ }
+
+ /* Distributing cpu per bucket credits to devices */
+ for (i = 0; i < num_core; i++) {
+ for (j = 0; j < FMN_CORE_NBUCKETS; j++)
+ dev_info->credit_config[(i * 8) + j] = cpu_credits;
+ }
+}
+
+/*
+ * Each core has 256 slots and 8 buckets,
+ * Configure the 8 buckets each with 32 slots
+ */
+static void setup_cpu_fmninfo(struct xlr_fmn_info *cpu, int num_core)
+{
+ int i, j;
+
+ for (i = 0; i < num_core; i++) {
+ cpu[i].start_stn_id = (8 * i);
+ cpu[i].end_stn_id = (8 * i + 8);
+
+ for (j = cpu[i].start_stn_id; j < cpu[i].end_stn_id; j++)
+ xlr_board_fmn_config.bucket_size[j] = 32;
+ }
+}
+
+/**
+ * Setup the FMN details for each devices according to the device available
+ * in each variant of XLR/XLS processor
+ */
+void xlr_board_info_setup(void)
+{
+ struct xlr_fmn_info *cpu = xlr_board_fmn_config.cpu;
+ struct xlr_fmn_info *gmac = xlr_board_fmn_config.gmac;
+ struct xlr_fmn_info *xgmac = xlr_board_fmn_config.xgmac;
+ struct xlr_fmn_info *dma = &xlr_board_fmn_config.dma;
+ struct xlr_fmn_info *cmp = &xlr_board_fmn_config.cmp;
+ struct xlr_fmn_info *sae = &xlr_board_fmn_config.sae;
+ int processor_id, num_core;
+
+ num_core = hweight32(nlm_current_node()->coremask);
+ processor_id = read_c0_prid() & PRID_IMP_MASK;
+
+ setup_cpu_fmninfo(cpu, num_core);
+ switch (processor_id) {
+ case PRID_IMP_NETLOGIC_XLS104:
+ case PRID_IMP_NETLOGIC_XLS108:
+ setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+ FMN_STNID_GMAC0_TX3, 8, 16, 32);
+ setup_fmn_cc(dma, FMN_STNID_DMA_0,
+ FMN_STNID_DMA_3, 4, 8, 64);
+ setup_fmn_cc(sae, FMN_STNID_SEC0,
+ FMN_STNID_SEC1, 2, 8, 128);
+ break;
+
+ case PRID_IMP_NETLOGIC_XLS204:
+ case PRID_IMP_NETLOGIC_XLS208:
+ setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+ FMN_STNID_GMAC0_TX3, 8, 16, 32);
+ setup_fmn_cc(dma, FMN_STNID_DMA_0,
+ FMN_STNID_DMA_3, 4, 8, 64);
+ setup_fmn_cc(sae, FMN_STNID_SEC0,
+ FMN_STNID_SEC1, 2, 8, 128);
+ break;
+
+ case PRID_IMP_NETLOGIC_XLS404:
+ case PRID_IMP_NETLOGIC_XLS408:
+ case PRID_IMP_NETLOGIC_XLS404B:
+ case PRID_IMP_NETLOGIC_XLS408B:
+ case PRID_IMP_NETLOGIC_XLS416B:
+ case PRID_IMP_NETLOGIC_XLS608B:
+ case PRID_IMP_NETLOGIC_XLS616B:
+ setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+ FMN_STNID_GMAC0_TX3, 8, 8, 32);
+ setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0,
+ FMN_STNID_GMAC1_TX3, 8, 8, 32);
+ setup_fmn_cc(dma, FMN_STNID_DMA_0,
+ FMN_STNID_DMA_3, 4, 4, 64);
+ setup_fmn_cc(cmp, FMN_STNID_CMP_0,
+ FMN_STNID_CMP_3, 4, 4, 64);
+ setup_fmn_cc(sae, FMN_STNID_SEC0,
+ FMN_STNID_SEC1, 2, 8, 128);
+ break;
+
+ case PRID_IMP_NETLOGIC_XLS412B:
+ setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+ FMN_STNID_GMAC0_TX3, 8, 8, 32);
+ setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0,
+ FMN_STNID_GMAC1_TX3, 8, 8, 32);
+ setup_fmn_cc(dma, FMN_STNID_DMA_0,
+ FMN_STNID_DMA_3, 4, 4, 64);
+ setup_fmn_cc(cmp, FMN_STNID_CMP_0,
+ FMN_STNID_CMP_3, 4, 4, 64);
+ setup_fmn_cc(sae, FMN_STNID_SEC0,
+ FMN_STNID_SEC1, 2, 8, 128);
+ break;
+
+ case PRID_IMP_NETLOGIC_XLR308:
+ case PRID_IMP_NETLOGIC_XLR308C:
+ setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+ FMN_STNID_GMAC0_TX3, 8, 16, 32);
+ setup_fmn_cc(dma, FMN_STNID_DMA_0,
+ FMN_STNID_DMA_3, 4, 8, 64);
+ setup_fmn_cc(sae, FMN_STNID_SEC0,
+ FMN_STNID_SEC1, 2, 4, 128);
+ break;
+
+ case PRID_IMP_NETLOGIC_XLR532:
+ case PRID_IMP_NETLOGIC_XLR532C:
+ case PRID_IMP_NETLOGIC_XLR516C:
+ case PRID_IMP_NETLOGIC_XLR508C:
+ setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+ FMN_STNID_GMAC0_TX3, 8, 16, 32);
+ setup_fmn_cc(dma, FMN_STNID_DMA_0,
+ FMN_STNID_DMA_3, 4, 8, 64);
+ setup_fmn_cc(sae, FMN_STNID_SEC0,
+ FMN_STNID_SEC1, 2, 4, 128);
+ break;
+
+ case PRID_IMP_NETLOGIC_XLR732:
+ case PRID_IMP_NETLOGIC_XLR716:
+ setup_fmn_cc(&xgmac[0], FMN_STNID_XMAC0_00_TX,
+ FMN_STNID_XMAC0_15_TX, 8, 0, 32);
+ setup_fmn_cc(&xgmac[1], FMN_STNID_XMAC1_00_TX,
+ FMN_STNID_XMAC1_15_TX, 8, 0, 32);
+ setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+ FMN_STNID_GMAC0_TX3, 8, 24, 32);
+ setup_fmn_cc(dma, FMN_STNID_DMA_0,
+ FMN_STNID_DMA_3, 4, 4, 64);
+ setup_fmn_cc(sae, FMN_STNID_SEC0,
+ FMN_STNID_SEC1, 2, 4, 128);
+ break;
+ default:
+ pr_err("Unknown CPU with processor ID [%d]\n", processor_id);
+ pr_err("Error: Cannot initialize FMN credits.\n");
+ }
+
+ check_credit_distribution();
+
+#if 0 /* debug */
+ print_credit_config(&cpu[0]);
+ print_credit_config(&gmac[0]);
+#endif
+}
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
new file mode 100644
index 0000000..d428e84
--- /dev/null
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irqreturn.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/mipsregs.h>
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/xlr/fmn.h>
+#include <asm/netlogic/common.h>
+
+#define COP2_CC_INIT_CPU_DEST(dest, conf) \
+do { \
+ nlm_write_c2_cc##dest(0, conf[(dest * 8) + 0]); \
+ nlm_write_c2_cc##dest(1, conf[(dest * 8) + 1]); \
+ nlm_write_c2_cc##dest(2, conf[(dest * 8) + 2]); \
+ nlm_write_c2_cc##dest(3, conf[(dest * 8) + 3]); \
+ nlm_write_c2_cc##dest(4, conf[(dest * 8) + 4]); \
+ nlm_write_c2_cc##dest(5, conf[(dest * 8) + 5]); \
+ nlm_write_c2_cc##dest(6, conf[(dest * 8) + 6]); \
+ nlm_write_c2_cc##dest(7, conf[(dest * 8) + 7]); \
+} while (0)
+
+struct fmn_message_handler {
+ void (*action)(int, int, int, int, struct nlm_fmn_msg *, void *);
+ void *arg;
+} msg_handlers[128];
+
+/*
+ * FMN interrupt handler. We configure the FMN so that any messages in
+ * any of the CPU buckets will trigger an interrupt on the CPU.
+ * The message can be from any device on the FMN (like NAE/SAE/DMA).
+ * The source station id is used to figure out which of the registered
+ * handlers have to be called.
+ */
+static irqreturn_t fmn_message_handler(int irq, void *data)
+{
+ struct fmn_message_handler *hndlr;
+ int bucket, rv;
+ int size = 0, code = 0, src_stnid = 0;
+ struct nlm_fmn_msg msg;
+ uint32_t mflags, bkt_status;
+
+ mflags = nlm_cop2_enable_irqsave();
+ /* Disable message ring interrupt */
+ nlm_fmn_setup_intr(irq, 0);
+ while (1) {
+ /* 8 bkts per core, [24:31] each bit represents one bucket
+ * Bit is Zero if bucket is not empty */
+ bkt_status = (nlm_read_c2_status0() >> 24) & 0xff;
+ if (bkt_status == 0xff)
+ break;
+ for (bucket = 0; bucket < 8; bucket++) {
+ /* Continue on empty bucket */
+ if (bkt_status & (1 << bucket))
+ continue;
+ rv = nlm_fmn_receive(bucket, &size, &code, &src_stnid,
+ &msg);
+ if (rv != 0)
+ continue;
+
+ hndlr = &msg_handlers[src_stnid];
+ if (hndlr->action == NULL)
+ pr_warn("No msgring handler for stnid %d\n",
+ src_stnid);
+ else {
+ nlm_cop2_disable_irqrestore(mflags);
+ hndlr->action(bucket, src_stnid, size, code,
+ &msg, hndlr->arg);
+ mflags = nlm_cop2_enable_irqsave();
+ }
+ }
+ };
+ /* Enable message ring intr, to any thread in core */
+ nlm_fmn_setup_intr(irq, (1 << nlm_threads_per_core) - 1);
+ nlm_cop2_disable_irqrestore(mflags);
+ return IRQ_HANDLED;
+}
+
+struct irqaction fmn_irqaction = {
+ .handler = fmn_message_handler,
+ .flags = IRQF_PERCPU,
+ .name = "fmn",
+};
+
+void xlr_percpu_fmn_init(void)
+{
+ struct xlr_fmn_info *cpu_fmn_info;
+ int *bucket_sizes;
+ uint32_t flags;
+ int id;
+
+ BUG_ON(nlm_thread_id() != 0);
+ id = nlm_core_id();
+
+ bucket_sizes = xlr_board_fmn_config.bucket_size;
+ cpu_fmn_info = &xlr_board_fmn_config.cpu[id];
+ flags = nlm_cop2_enable_irqsave();
+
+ /* Setup bucket sizes for the core. */
+ nlm_write_c2_bucksize(0, bucket_sizes[id * 8 + 0]);
+ nlm_write_c2_bucksize(1, bucket_sizes[id * 8 + 1]);
+ nlm_write_c2_bucksize(2, bucket_sizes[id * 8 + 2]);
+ nlm_write_c2_bucksize(3, bucket_sizes[id * 8 + 3]);
+ nlm_write_c2_bucksize(4, bucket_sizes[id * 8 + 4]);
+ nlm_write_c2_bucksize(5, bucket_sizes[id * 8 + 5]);
+ nlm_write_c2_bucksize(6, bucket_sizes[id * 8 + 6]);
+ nlm_write_c2_bucksize(7, bucket_sizes[id * 8 + 7]);
+
+ /*
+ * For sending FMN messages, we need credits on the destination
+ * bucket. Program the credits this core has on the 128 possible
+ * destination buckets.
+ * We cannot use a loop here, because the the first argument has
+ * to be a constant integer value.
+ */
+ COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(1, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(2, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(3, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(4, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(5, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(6, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(7, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(8, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(9, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(10, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(11, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(12, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(13, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(14, cpu_fmn_info->credit_config);
+ COP2_CC_INIT_CPU_DEST(15, cpu_fmn_info->credit_config);
+
+ /* enable FMN interrupts on this CPU */
+ nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1);
+ nlm_cop2_disable_irqrestore(flags);
+}
+
+
+/*
+ * Register a FMN message handler with respect to the source station id
+ * @stnid: source station id
+ * @action: Handler function pointer
+ */
+int nlm_register_fmn_handler(int start_stnid, int end_stnid,
+ void (*action)(int, int, int, int, struct nlm_fmn_msg *, void *),
+ void *arg)
+{
+ int sstnid;
+
+ for (sstnid = start_stnid; sstnid <= end_stnid; sstnid++) {
+ msg_handlers[sstnid].arg = arg;
+ smp_wmb();
+ msg_handlers[sstnid].action = action;
+ }
+ pr_debug("Registered FMN msg handler for stnid %d-%d\n",
+ start_stnid, end_stnid);
+ return 0;
+}
+
+void nlm_setup_fmn_irq(void)
+{
+ uint32_t flags;
+
+ /* setup irq only once */
+ setup_irq(IRQ_FMN, &fmn_irqaction);
+
+ flags = nlm_cop2_enable_irqsave();
+ nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1);
+ nlm_cop2_disable_irqrestore(flags);
+}
diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c
new file mode 100644
index 0000000..4d1b4c0
--- /dev/null
+++ b/arch/mips/netlogic/xlr/platform-flash.c
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2011, Netlogic Microsystems.
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/resource.h>
+#include <linux/spi/flash.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/flash.h>
+#include <asm/netlogic/xlr/bridge.h>
+#include <asm/netlogic/xlr/gpio.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+/*
+ * Default NOR partition layout
+ */
+static struct mtd_partition xlr_nor_parts[] = {
+ {
+ .name = "User FS",
+ .offset = 0x800000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/*
+ * Default NAND partition layout
+ */
+static struct mtd_partition xlr_nand_parts[] = {
+ {
+ .name = "Root Filesystem",
+ .offset = 64 * 64 * 2048,
+ .size = 432 * 64 * 2048,
+ },
+ {
+ .name = "Home Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+/* Use PHYSMAP flash for NOR */
+struct physmap_flash_data xlr_nor_data = {
+ .width = 2,
+ .parts = xlr_nor_parts,
+ .nr_parts = ARRAY_SIZE(xlr_nor_parts),
+};
+
+static struct resource xlr_nor_res[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device xlr_nor_dev = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &xlr_nor_data,
+ },
+ .num_resources = ARRAY_SIZE(xlr_nor_res),
+ .resource = xlr_nor_res,
+};
+
+/*
+ * Use "gen_nand" driver for NAND flash
+ *
+ * There seems to be no way to store a private pointer containing
+ * platform specific info in gen_nand drivier. We will use a global
+ * struct for now, since we currently have only one NAND chip per board.
+ */
+struct xlr_nand_flash_priv {
+ int cs;
+ uint64_t flash_mmio;
+};
+
+static struct xlr_nand_flash_priv nand_priv;
+
+static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ if (ctrl & NAND_CLE)
+ nlm_write_reg(nand_priv.flash_mmio,
+ FLASH_NAND_CLE(nand_priv.cs), cmd);
+ else if (ctrl & NAND_ALE)
+ nlm_write_reg(nand_priv.flash_mmio,
+ FLASH_NAND_ALE(nand_priv.cs), cmd);
+}
+
+struct platform_nand_data xlr_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(xlr_nand_parts),
+ .chip_delay = 50,
+ .partitions = xlr_nand_parts,
+ },
+ .ctrl = {
+ .cmd_ctrl = xlr_nand_ctrl,
+ },
+};
+
+static struct resource xlr_nand_res[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device xlr_nand_dev = {
+ .name = "gen_nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(xlr_nand_res),
+ .resource = xlr_nand_res,
+ .dev = {
+ .platform_data = &xlr_nand_data,
+ }
+};
+
+/*
+ * XLR/XLS supports upto 8 devices on its FLASH interface. The value in
+ * FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the
+ * flash devices.
+ * Under this, each flash device has an offset and size given by the
+ * CSBASE_ADDR and CSBASE_MASK registers for the device.
+ *
+ * The CSBASE_ registers are expected to be setup by the bootloader.
+ */
+static void setup_flash_resource(uint64_t flash_mmio,
+ uint64_t flash_map_base, int cs, struct resource *res)
+{
+ u32 base, mask;
+
+ base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs));
+ mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs));
+
+ res->start = flash_map_base + ((unsigned long)base << 16);
+ res->end = res->start + (mask + 1) * 64 * 1024;
+}
+
+static int __init xlr_flash_init(void)
+{
+ uint64_t gpio_mmio, flash_mmio, flash_map_base;
+ u32 gpio_resetcfg, flash_bar;
+ int cs, boot_nand, boot_nor;
+
+ /* Flash address bits 39:24 is in bridge flash BAR */
+ flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR);
+ flash_map_base = (flash_bar & 0xffff0000) << 8;
+
+ gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+ flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET);
+
+ /* Get the chip reset config */
+ gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG);
+
+ /* Check for boot flash type */
+ boot_nor = boot_nand = 0;
+ if (nlm_chip_is_xls()) {
+ /* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */
+ if (gpio_resetcfg & (1 << 16))
+ boot_nand = 1;
+
+ /* check boot from PCMCIA, (GPIO reset reg bit 15 */
+ if ((gpio_resetcfg & (1 << 15)) == 0)
+ boot_nor = 1; /* not set, booted from NOR */
+ } else { /* XLR */
+ /* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */
+ if ((gpio_resetcfg & (1 << 16)) == 0)
+ boot_nor = 1; /* not set, booted from NOR */
+ }
+
+ /* boot flash at chip select 0 */
+ cs = 0;
+
+ if (boot_nand) {
+ nand_priv.cs = cs;
+ nand_priv.flash_mmio = flash_mmio;
+ setup_flash_resource(flash_mmio, flash_map_base, cs,
+ xlr_nand_res);
+
+ /* Initialize NAND flash at CS 0 */
+ nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs),
+ FLASH_NAND_CSDEV_PARAM);
+ nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs),
+ FLASH_NAND_CSTIME_PARAMA);
+ nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs),
+ FLASH_NAND_CSTIME_PARAMB);
+
+ pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res);
+ return platform_device_register(&xlr_nand_dev);
+ }
+
+ if (boot_nor) {
+ setup_flash_resource(flash_mmio, flash_map_base, cs,
+ xlr_nor_res);
+ pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res);
+ return platform_device_register(&xlr_nor_dev);
+ }
+ return 0;
+}
+
+arch_initcall(xlr_flash_init);
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
new file mode 100644
index 0000000..4785932
--- /dev/null
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -0,0 +1,250 @@
+/*
+ * Copyright 2011, Netlogic Microsystems.
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/i2c.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+static unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
+{
+ uint64_t uartbase;
+ unsigned int value;
+
+ /* sign extend to 64 bits, if needed */
+ uartbase = (uint64_t)(long)p->membase;
+ value = nlm_read_reg(uartbase, offset);
+
+ /* See XLR/XLS errata */
+ if (offset == UART_MSR)
+ value ^= 0xF0;
+ else if (offset == UART_MCR)
+ value ^= 0x3;
+
+ return value;
+}
+
+static void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
+{
+ uint64_t uartbase;
+
+ /* sign extend to 64 bits, if needed */
+ uartbase = (uint64_t)(long)p->membase;
+
+ /* See XLR/XLS errata */
+ if (offset == UART_MSR)
+ value ^= 0xF0;
+ else if (offset == UART_MCR)
+ value ^= 0x3;
+
+ nlm_write_reg(uartbase, offset, value);
+}
+
+#define PORT(_irq) \
+ { \
+ .irq = _irq, \
+ .regshift = 2, \
+ .iotype = UPIO_MEM32, \
+ .flags = (UPF_SKIP_TEST | \
+ UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\
+ .uartclk = PIC_CLK_HZ, \
+ .type = PORT_16550A, \
+ .serial_in = nlm_xlr_uart_in, \
+ .serial_out = nlm_xlr_uart_out, \
+ }
+
+static struct plat_serial8250_port xlr_uart_data[] = {
+ PORT(PIC_UART_0_IRQ),
+ PORT(PIC_UART_1_IRQ),
+ {},
+};
+
+static struct platform_device uart_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = xlr_uart_data,
+ },
+};
+
+static int __init nlm_uart_init(void)
+{
+ unsigned long uartbase;
+
+ uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
+ xlr_uart_data[0].membase = (void __iomem *)uartbase;
+ xlr_uart_data[0].mapbase = CPHYSADDR(uartbase);
+
+ uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_1_OFFSET);
+ xlr_uart_data[1].membase = (void __iomem *)uartbase;
+ xlr_uart_data[1].mapbase = CPHYSADDR(uartbase);
+
+ return platform_device_register(&uart_device);
+}
+
+arch_initcall(nlm_uart_init);
+
+#ifdef CONFIG_USB
+/* Platform USB devices, only on XLS chips */
+static u64 xls_usb_dmamask = ~(u32)0;
+#define USB_PLATFORM_DEV(n, i, irq) \
+ { \
+ .name = n, \
+ .id = i, \
+ .num_resources = 2, \
+ .dev = { \
+ .dma_mask = &xls_usb_dmamask, \
+ .coherent_dma_mask = 0xffffffff, \
+ }, \
+ .resource = (struct resource[]) { \
+ { \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = irq, \
+ .end = irq, \
+ .flags = IORESOURCE_IRQ, \
+ }, \
+ }, \
+ }
+
+static struct usb_ehci_pdata xls_usb_ehci_pdata = {
+ .caps_offset = 0,
+};
+
+static struct usb_ohci_pdata xls_usb_ohci_pdata;
+
+static struct platform_device xls_usb_ehci_device =
+ USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ);
+static struct platform_device xls_usb_ohci_device_0 =
+ USB_PLATFORM_DEV("ohci-platform", 1, PIC_USB_IRQ);
+static struct platform_device xls_usb_ohci_device_1 =
+ USB_PLATFORM_DEV("ohci-platform", 2, PIC_USB_IRQ);
+
+static struct platform_device *xls_platform_devices[] = {
+ &xls_usb_ehci_device,
+ &xls_usb_ohci_device_0,
+ &xls_usb_ohci_device_1,
+};
+
+int xls_platform_usb_init(void)
+{
+ uint64_t usb_mmio, gpio_mmio;
+ unsigned long memres;
+ uint32_t val;
+
+ if (!nlm_chip_is_xls())
+ return 0;
+
+ gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+ usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_1_OFFSET);
+
+ /* Clear Rogue Phy INTs */
+ nlm_write_reg(usb_mmio, 49, 0x10000000);
+ /* Enable all interrupts */
+ nlm_write_reg(usb_mmio, 50, 0x1f000000);
+
+ /* Enable ports */
+ nlm_write_reg(usb_mmio, 1, 0x07000500);
+
+ val = nlm_read_reg(gpio_mmio, 21);
+ if (((val >> 22) & 0x01) == 0) {
+ pr_info("Detected USB Device mode - Not supported!\n");
+ nlm_write_reg(usb_mmio, 0, 0x01000000);
+ return 0;
+ }
+
+ pr_info("Detected USB Host mode - Adding XLS USB devices.\n");
+ /* Clear reset, host mode */
+ nlm_write_reg(usb_mmio, 0, 0x02000000);
+
+ /* Memory resource for various XLS usb ports */
+ usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET);
+ memres = CPHYSADDR((unsigned long)usb_mmio);
+ xls_usb_ehci_device.resource[0].start = memres;
+ xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
+ xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata;
+
+ memres += 0x400;
+ xls_usb_ohci_device_0.resource[0].start = memres;
+ xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1;
+ xls_usb_ohci_device_0.dev.platform_data = &xls_usb_ohci_pdata;
+
+ memres += 0x400;
+ xls_usb_ohci_device_1.resource[0].start = memres;
+ xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1;
+ xls_usb_ohci_device_1.dev.platform_data = &xls_usb_ohci_pdata;
+
+ return platform_add_devices(xls_platform_devices,
+ ARRAY_SIZE(xls_platform_devices));
+}
+
+arch_initcall(xls_platform_usb_init);
+#endif
+
+#ifdef CONFIG_I2C
+static struct i2c_board_info nlm_i2c_board_info1[] __initdata = {
+ /* All XLR boards have this RTC and Max6657 Temp Chip */
+ [0] = {
+ .type = "ds1374",
+ .addr = 0x68
+ },
+ [1] = {
+ .type = "lm90",
+ .addr = 0x4c
+ },
+};
+
+static struct resource i2c_resources[] = {
+ [0] = {
+ .start = 0, /* filled at init */
+ .end = 0,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device nlm_xlr_i2c_1 = {
+ .name = "xlr-i2cbus",
+ .id = 1,
+ .num_resources = 1,
+ .resource = i2c_resources,
+};
+
+static int __init nlm_i2c_init(void)
+{
+ int err = 0;
+ unsigned int offset;
+
+ /* I2C bus 0 does not have any useful devices, configure only bus 1 */
+ offset = NETLOGIC_IO_I2C_1_OFFSET;
+ nlm_xlr_i2c_1.resource[0].start = CPHYSADDR(nlm_mmio_base(offset));
+ nlm_xlr_i2c_1.resource[0].end = nlm_xlr_i2c_1.resource[0].start + 0xfff;
+
+ platform_device_register(&nlm_xlr_i2c_1);
+
+ err = i2c_register_board_info(1, nlm_i2c_board_info1,
+ ARRAY_SIZE(nlm_i2c_board_info1));
+ if (err < 0)
+ pr_err("nlm-i2c: cannot register board I2C devices\n");
+ return err;
+}
+
+arch_initcall(nlm_i2c_init);
+#endif
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
new file mode 100644
index 0000000..72ceddc
--- /dev/null
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial_8250.h>
+#include <linux/pm.h>
+
+#include <asm/idle.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/psb-bootinfo.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+
+#include <asm/netlogic/xlr/xlr.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/gpio.h>
+#include <asm/netlogic/xlr/fmn.h>
+
+uint64_t nlm_io_base = DEFAULT_NETLOGIC_IO_BASE;
+struct psb_info nlm_prom_info;
+
+/* default to uniprocessor */
+unsigned int nlm_threads_per_core = 1;
+struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
+cpumask_t nlm_cpumask = CPU_MASK_CPU0;
+
+static void nlm_linux_exit(void)
+{
+ uint64_t gpiobase;
+
+ gpiobase = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+ /* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */
+ nlm_write_reg(gpiobase, GPIO_SWRESET_REG, 1);
+ for ( ; ; )
+ cpu_wait();
+}
+
+void __init plat_mem_setup(void)
+{
+ _machine_restart = (void (*)(char *))nlm_linux_exit;
+ _machine_halt = nlm_linux_exit;
+ pm_power_off = nlm_linux_exit;
+}
+
+const char *get_system_type(void)
+{
+ return "Netlogic XLR/XLS Series";
+}
+
+unsigned int nlm_get_cpu_frequency(void)
+{
+ return (unsigned int)nlm_prom_info.cpu_frequency;
+}
+
+void __init prom_free_prom_memory(void)
+{
+ /* Nothing yet */
+}
+
+void nlm_percpu_init(int hwcpuid)
+{
+ if (hwcpuid % 4 == 0)
+ xlr_percpu_fmn_init();
+}
+
+static void __init build_arcs_cmdline(int *argv)
+{
+ int i, remain, len;
+ char *arg;
+
+ remain = sizeof(arcs_cmdline) - 1;
+ arcs_cmdline[0] = '\0';
+ for (i = 0; argv[i] != 0; i++) {
+ arg = (char *)(long)argv[i];
+ len = strlen(arg);
+ if (len + 1 > remain)
+ break;
+ strcat(arcs_cmdline, arg);
+ strcat(arcs_cmdline, " ");
+ remain -= len + 1;
+ }
+
+ /* Add the default options here */
+ if ((strstr(arcs_cmdline, "console=")) == NULL) {
+ arg = "console=ttyS0,38400 ";
+ len = strlen(arg);
+ if (len > remain)
+ goto fail;
+ strcat(arcs_cmdline, arg);
+ remain -= len;
+ }
+#ifdef CONFIG_BLK_DEV_INITRD
+ if ((strstr(arcs_cmdline, "rdinit=")) == NULL) {
+ arg = "rdinit=/sbin/init ";
+ len = strlen(arg);
+ if (len > remain)
+ goto fail;
+ strcat(arcs_cmdline, arg);
+ remain -= len;
+ }
+#endif
+ return;
+fail:
+ panic("Cannot add %s, command line too big!", arg);
+}
+
+static void prom_add_memory(void)
+{
+ struct nlm_boot_mem_map *bootm;
+ u64 start, size;
+ u64 pref_backup = 512; /* avoid pref walking beyond end */
+ int i;
+
+ bootm = (void *)(long)nlm_prom_info.psb_mem_map;
+ for (i = 0; i < bootm->nr_map; i++) {
+ if (bootm->map[i].type != BOOT_MEM_RAM)
+ continue;
+ start = bootm->map[i].addr;
+ size = bootm->map[i].size;
+
+ /* Work around for using bootloader mem */
+ if (i == 0 && start == 0 && size == 0x0c000000)
+ size = 0x0ff00000;
+
+ add_memory_region(start, size - pref_backup, BOOT_MEM_RAM);
+ }
+}
+
+static void nlm_init_node(void)
+{
+ struct nlm_soc_info *nodep;
+
+ nodep = nlm_current_node();
+ nodep->picbase = nlm_mmio_base(NETLOGIC_IO_PIC_OFFSET);
+ nodep->ebase = read_c0_ebase() & MIPS_EBASE_BASE;
+ spin_lock_init(&nodep->piclock);
+}
+
+void __init prom_init(void)
+{
+ int *argv, *envp; /* passed as 32 bit ptrs */
+ struct psb_info *prom_infop;
+ void *reset_vec;
+#ifdef CONFIG_SMP
+ int i;
+#endif
+
+ /* truncate to 32 bit and sign extend all args */
+ argv = (int *)(long)(int)fw_arg1;
+ envp = (int *)(long)(int)fw_arg2;
+ prom_infop = (struct psb_info *)(long)(int)fw_arg3;
+
+ nlm_prom_info = *prom_infop;
+ nlm_init_node();
+
+ /* Update reset entry point with CPU init code */
+ reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS);
+ memset(reset_vec, 0, RESET_VEC_SIZE);
+ memcpy(reset_vec, (void *)nlm_reset_entry,
+ (nlm_reset_entry_end - nlm_reset_entry));
+
+ build_arcs_cmdline(argv);
+ prom_add_memory();
+
+#ifdef CONFIG_SMP
+ for (i = 0; i < 32; i++)
+ if (nlm_prom_info.online_cpu_map & (1 << i))
+ cpumask_set_cpu(i, &nlm_cpumask);
+ nlm_wakeup_secondary_cpus();
+ register_smp_ops(&nlm_smp_ops);
+#endif
+ xlr_board_info_setup();
+ xlr_percpu_fmn_init();
+}
diff --git a/arch/mips/netlogic/xlr/wakeup.c b/arch/mips/netlogic/xlr/wakeup.c
new file mode 100644
index 0000000..d61cba1
--- /dev/null
+++ b/arch/mips/netlogic/xlr/wakeup.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/delay.h>
+#include <linux/threads.h>
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/string.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/mips-extns.h>
+
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+
+int xlr_wakeup_secondary_cpus(void)
+{
+ struct nlm_soc_info *nodep;
+ unsigned int i, j, boot_cpu;
+ volatile u32 *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
+
+ /*
+ * In case of RMI boot, hit with NMI to get the cores
+ * from bootloader to linux code.
+ */
+ nodep = nlm_get_node(0);
+ boot_cpu = hard_smp_processor_id();
+ nlm_set_nmi_handler(nlm_rmiboot_preboot);
+ for (i = 0; i < NR_CPUS; i++) {
+ if (i == boot_cpu || !cpumask_test_cpu(i, &nlm_cpumask))
+ continue;
+ nlm_pic_send_ipi(nodep->picbase, i, 1, 1); /* send NMI */
+ }
+
+ /* Fill up the coremask early */
+ nodep->coremask = 1;
+ for (i = 1; i < nlm_cores_per_node(); i++) {
+ for (j = 1000000; j > 0; j--) {
+ if (cpu_ready[i * NLM_THREADS_PER_CORE])
+ break;
+ udelay(10);
+ }
+ if (j != 0)
+ nodep->coremask |= (1u << i);
+ else
+ pr_err("Failed to wakeup core %d\n", i);
+ }
+
+ return 0;
+}