v4.19.13 snapshot.
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
new file mode 100644
index 0000000..462b126
--- /dev/null
+++ b/arch/mips/loongson32/Kconfig
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+if MACH_LOONGSON32
+
+choice
+ prompt "Machine Type"
+
+config LOONGSON1_LS1B
+ bool "Loongson LS1B board"
+ select CEVT_R4K if !MIPS_EXTERNAL_TIMER
+ select CSRC_R4K if !MIPS_EXTERNAL_TIMER
+ select SYS_HAS_CPU_LOONGSON1B
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select IRQ_MIPS_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_MIPS16
+ select SYS_HAS_EARLY_PRINTK
+ select USE_GENERIC_EARLY_PRINTK_8250
+ select COMMON_CLK
+
+config LOONGSON1_LS1C
+ bool "Loongson LS1C board"
+ select CEVT_R4K if !MIPS_EXTERNAL_TIMER
+ select CSRC_R4K if !MIPS_EXTERNAL_TIMER
+ select SYS_HAS_CPU_LOONGSON1C
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select IRQ_MIPS_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_MIPS16
+ select SYS_HAS_EARLY_PRINTK
+ select USE_GENERIC_EARLY_PRINTK_8250
+ select COMMON_CLK
+endchoice
+
+menuconfig CEVT_CSRC_LS1X
+ bool "Use PWM Timer for clockevent/clocksource"
+ select MIPS_EXTERNAL_TIMER
+ depends on CPU_LOONGSON1
+ help
+ This option changes the default clockevent/clocksource to PWM Timer,
+ and is required by Loongson1 CPUFreq support.
+
+ If unsure, say N.
+
+choice
+ prompt "Select clockevent/clocksource"
+ depends on CEVT_CSRC_LS1X
+ default TIMER_USE_PWM0
+
+config TIMER_USE_PWM0
+ bool "Use PWM Timer 0"
+ help
+ Use PWM Timer 0 as the default clockevent/clocksourcer.
+
+config TIMER_USE_PWM1
+ bool "Use PWM Timer 1"
+ help
+ Use PWM Timer 1 as the default clockevent/clocksourcer.
+
+config TIMER_USE_PWM2
+ bool "Use PWM Timer 2"
+ help
+ Use PWM Timer 2 as the default clockevent/clocksourcer.
+
+config TIMER_USE_PWM3
+ bool "Use PWM Timer 3"
+ help
+ Use PWM Timer 3 as the default clockevent/clocksourcer.
+
+endchoice
+
+endif # MACH_LOONGSON32
diff --git a/arch/mips/loongson32/Makefile b/arch/mips/loongson32/Makefile
new file mode 100644
index 0000000..1ab2c5b
--- /dev/null
+++ b/arch/mips/loongson32/Makefile
@@ -0,0 +1,17 @@
+#
+# Common code for all Loongson 1 based systems
+#
+
+obj-$(CONFIG_MACH_LOONGSON32) += common/
+
+#
+# Loongson LS1B board
+#
+
+obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
+
+#
+# Loongson LS1C board
+#
+
+obj-$(CONFIG_LOONGSON1_LS1C) += ls1c/
diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform
new file mode 100644
index 0000000..a0dbb3b
--- /dev/null
+++ b/arch/mips/loongson32/Platform
@@ -0,0 +1,4 @@
+cflags-$(CONFIG_CPU_LOONGSON1) += -march=mips32 -Wa,--trap
+platform-$(CONFIG_MACH_LOONGSON32) += loongson32/
+cflags-$(CONFIG_MACH_LOONGSON32) += -I$(srctree)/arch/mips/include/asm/mach-loongson32
+load-$(CONFIG_CPU_LOONGSON1) += 0xffffffff80100000
diff --git a/arch/mips/loongson32/common/Makefile b/arch/mips/loongson32/common/Makefile
new file mode 100644
index 0000000..723b4ce
--- /dev/null
+++ b/arch/mips/loongson32/common/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for common code of loongson1 based machines.
+#
+
+obj-y += time.o irq.o platform.o prom.o reset.o setup.o
diff --git a/arch/mips/loongson32/common/irq.c b/arch/mips/loongson32/common/irq.c
new file mode 100644
index 0000000..635a4ab
--- /dev/null
+++ b/arch/mips/loongson32/common/irq.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq_cpu.h>
+
+#include <loongson1.h>
+#include <irq.h>
+
+#define LS1X_INTC_REG(n, x) \
+ ((void __iomem *)KSEG1ADDR(LS1X_INTC_BASE + (n * 0x18) + (x)))
+
+#define LS1X_INTC_INTISR(n) LS1X_INTC_REG(n, 0x0)
+#define LS1X_INTC_INTIEN(n) LS1X_INTC_REG(n, 0x4)
+#define LS1X_INTC_INTSET(n) LS1X_INTC_REG(n, 0x8)
+#define LS1X_INTC_INTCLR(n) LS1X_INTC_REG(n, 0xc)
+#define LS1X_INTC_INTPOL(n) LS1X_INTC_REG(n, 0x10)
+#define LS1X_INTC_INTEDGE(n) LS1X_INTC_REG(n, 0x14)
+
+static void ls1x_irq_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
+ | (1 << bit), LS1X_INTC_INTCLR(n));
+}
+
+static void ls1x_irq_mask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ & ~(1 << bit), LS1X_INTC_INTIEN(n));
+}
+
+static void ls1x_irq_mask_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ & ~(1 << bit), LS1X_INTC_INTIEN(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
+ | (1 << bit), LS1X_INTC_INTCLR(n));
+}
+
+static void ls1x_irq_unmask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ | (1 << bit), LS1X_INTC_INTIEN(n));
+}
+
+static int ls1x_irq_settype(struct irq_data *d, unsigned int type)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ | (1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ & ~(1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ & ~(1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ | (1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_NONE:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct irq_chip ls1x_irq_chip = {
+ .name = "LS1X-INTC",
+ .irq_ack = ls1x_irq_ack,
+ .irq_mask = ls1x_irq_mask,
+ .irq_mask_ack = ls1x_irq_mask_ack,
+ .irq_unmask = ls1x_irq_unmask,
+ .irq_set_type = ls1x_irq_settype,
+};
+
+static void ls1x_irq_dispatch(int n)
+{
+ u32 int_status, irq;
+
+ /* Get pending sources, masked by current enables */
+ int_status = __raw_readl(LS1X_INTC_INTISR(n)) &
+ __raw_readl(LS1X_INTC_INTIEN(n));
+
+ if (int_status) {
+ irq = LS1X_IRQ(n, __ffs(int_status));
+ do_IRQ(irq);
+ }
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending;
+
+ pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+ if (pending & CAUSEF_IP7)
+ do_IRQ(TIMER_IRQ);
+ else if (pending & CAUSEF_IP2)
+ ls1x_irq_dispatch(0); /* INT0 */
+ else if (pending & CAUSEF_IP3)
+ ls1x_irq_dispatch(1); /* INT1 */
+ else if (pending & CAUSEF_IP4)
+ ls1x_irq_dispatch(2); /* INT2 */
+ else if (pending & CAUSEF_IP5)
+ ls1x_irq_dispatch(3); /* INT3 */
+ else if (pending & CAUSEF_IP6)
+ ls1x_irq_dispatch(4); /* INT4 */
+ else
+ spurious_interrupt();
+
+}
+
+static struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+ .flags = IRQF_NO_THREAD,
+};
+
+static void __init ls1x_irq_init(int base)
+{
+ int n;
+
+ /* Disable interrupts and clear pending,
+ * setup all IRQs as high level triggered
+ */
+ for (n = 0; n < INTN; n++) {
+ __raw_writel(0x0, LS1X_INTC_INTIEN(n));
+ __raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
+ __raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
+ /* set DMA0, DMA1 and DMA2 to edge trigger */
+ __raw_writel(n ? 0x0 : 0xe000, LS1X_INTC_INTEDGE(n));
+ }
+
+
+ for (n = base; n < NR_IRQS; n++) {
+ irq_set_chip_and_handler(n, &ls1x_irq_chip,
+ handle_level_irq);
+ }
+
+ setup_irq(INT0_IRQ, &cascade_irqaction);
+ setup_irq(INT1_IRQ, &cascade_irqaction);
+ setup_irq(INT2_IRQ, &cascade_irqaction);
+ setup_irq(INT3_IRQ, &cascade_irqaction);
+#if defined(CONFIG_LOONGSON1_LS1C)
+ setup_irq(INT4_IRQ, &cascade_irqaction);
+#endif
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ ls1x_irq_init(LS1X_IRQ_BASE);
+}
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
new file mode 100644
index 0000000..ac584c5
--- /dev/null
+++ b/arch/mips/loongson32/common/platform.c
@@ -0,0 +1,378 @@
+/*
+ * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sizes.h>
+#include <linux/phy.h>
+#include <linux/serial_8250.h>
+#include <linux/stmmac.h>
+#include <linux/usb/ehci_pdriver.h>
+
+#include <platform.h>
+#include <loongson1.h>
+#include <cpufreq.h>
+#include <dma.h>
+#include <nand.h>
+
+/* 8250/16550 compatible UART */
+#define LS1X_UART(_id) \
+ { \
+ .mapbase = LS1X_UART ## _id ## _BASE, \
+ .irq = LS1X_UART ## _id ## _IRQ, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_IOREMAP | UPF_FIXED_TYPE, \
+ .type = PORT_16550A, \
+ }
+
+static struct plat_serial8250_port ls1x_serial8250_pdata[] = {
+ LS1X_UART(0),
+ LS1X_UART(1),
+ LS1X_UART(2),
+ LS1X_UART(3),
+ {},
+};
+
+struct platform_device ls1x_uart_pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = ls1x_serial8250_pdata,
+ },
+};
+
+void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
+{
+ struct clk *clk;
+ struct plat_serial8250_port *p;
+
+ clk = clk_get(&pdev->dev, pdev->name);
+ if (IS_ERR(clk)) {
+ pr_err("unable to get %s clock, err=%ld",
+ pdev->name, PTR_ERR(clk));
+ return;
+ }
+ clk_prepare_enable(clk);
+
+ for (p = pdev->dev.platform_data; p->flags != 0; ++p)
+ p->uartclk = clk_get_rate(clk);
+}
+
+/* CPUFreq */
+static struct plat_ls1x_cpufreq ls1x_cpufreq_pdata = {
+ .clk_name = "cpu_clk",
+ .osc_clk_name = "osc_clk",
+ .max_freq = 266 * 1000,
+ .min_freq = 33 * 1000,
+};
+
+struct platform_device ls1x_cpufreq_pdev = {
+ .name = "ls1x-cpufreq",
+ .dev = {
+ .platform_data = &ls1x_cpufreq_pdata,
+ },
+};
+
+/* DMA */
+static struct resource ls1x_dma_resources[] = {
+ [0] = {
+ .start = LS1X_DMAC_BASE,
+ .end = LS1X_DMAC_BASE + SZ_4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LS1X_DMA0_IRQ,
+ .end = LS1X_DMA0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = LS1X_DMA1_IRQ,
+ .end = LS1X_DMA1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = LS1X_DMA2_IRQ,
+ .end = LS1X_DMA2_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_dma_pdev = {
+ .name = "ls1x-dma",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_dma_resources),
+ .resource = ls1x_dma_resources,
+};
+
+void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata)
+{
+ ls1x_dma_pdev.dev.platform_data = pdata;
+}
+
+/* Synopsys Ethernet GMAC */
+static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
+ .phy_mask = 0,
+};
+
+static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
+ .pbl = 1,
+};
+
+int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
+{
+ struct plat_stmmacenet_data *plat_dat = NULL;
+ u32 val;
+
+ val = __raw_readl(LS1X_MUX_CTRL1);
+
+#if defined(CONFIG_LOONGSON1_LS1B)
+ plat_dat = dev_get_platdata(&pdev->dev);
+ if (plat_dat->bus_id) {
+ __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
+ GMAC1_USE_UART0, LS1X_MUX_CTRL0);
+ switch (plat_dat->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+ break;
+ default:
+ pr_err("unsupported mii mode %d\n",
+ plat_dat->interface);
+ return -ENOTSUPP;
+ }
+ val &= ~GMAC1_SHUT;
+ } else {
+ switch (plat_dat->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+ break;
+ default:
+ pr_err("unsupported mii mode %d\n",
+ plat_dat->interface);
+ return -ENOTSUPP;
+ }
+ val &= ~GMAC0_SHUT;
+ }
+ __raw_writel(val, LS1X_MUX_CTRL1);
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ plat_dat = dev_get_platdata(&pdev->dev);
+
+ val &= ~PHY_INTF_SELI;
+ if (plat_dat->interface == PHY_INTERFACE_MODE_RMII)
+ val |= 0x4 << PHY_INTF_SELI_SHIFT;
+ __raw_writel(val, LS1X_MUX_CTRL1);
+
+ val = __raw_readl(LS1X_MUX_CTRL0);
+ __raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
+#endif
+
+ return 0;
+}
+
+static struct plat_stmmacenet_data ls1x_eth0_pdata = {
+ .bus_id = 0,
+ .phy_addr = -1,
+#if defined(CONFIG_LOONGSON1_LS1B)
+ .interface = PHY_INTERFACE_MODE_MII,
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ .interface = PHY_INTERFACE_MODE_RMII,
+#endif
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .rx_queues_to_use = 1,
+ .tx_queues_to_use = 1,
+ .init = ls1x_eth_mux_init,
+};
+
+static struct resource ls1x_eth0_resources[] = {
+ [0] = {
+ .start = LS1X_GMAC0_BASE,
+ .end = LS1X_GMAC0_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "macirq",
+ .start = LS1X_GMAC0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_eth0_pdev = {
+ .name = "stmmaceth",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ls1x_eth0_resources),
+ .resource = ls1x_eth0_resources,
+ .dev = {
+ .platform_data = &ls1x_eth0_pdata,
+ },
+};
+
+#ifdef CONFIG_LOONGSON1_LS1B
+static struct plat_stmmacenet_data ls1x_eth1_pdata = {
+ .bus_id = 1,
+ .phy_addr = -1,
+ .interface = PHY_INTERFACE_MODE_MII,
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .rx_queues_to_use = 1,
+ .tx_queues_to_use = 1,
+ .init = ls1x_eth_mux_init,
+};
+
+static struct resource ls1x_eth1_resources[] = {
+ [0] = {
+ .start = LS1X_GMAC1_BASE,
+ .end = LS1X_GMAC1_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "macirq",
+ .start = LS1X_GMAC1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_eth1_pdev = {
+ .name = "stmmaceth",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ls1x_eth1_resources),
+ .resource = ls1x_eth1_resources,
+ .dev = {
+ .platform_data = &ls1x_eth1_pdata,
+ },
+};
+#endif /* CONFIG_LOONGSON1_LS1B */
+
+/* GPIO */
+static struct resource ls1x_gpio0_resources[] = {
+ [0] = {
+ .start = LS1X_GPIO0_BASE,
+ .end = LS1X_GPIO0_BASE + SZ_4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device ls1x_gpio0_pdev = {
+ .name = "ls1x-gpio",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ls1x_gpio0_resources),
+ .resource = ls1x_gpio0_resources,
+};
+
+static struct resource ls1x_gpio1_resources[] = {
+ [0] = {
+ .start = LS1X_GPIO1_BASE,
+ .end = LS1X_GPIO1_BASE + SZ_4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device ls1x_gpio1_pdev = {
+ .name = "ls1x-gpio",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ls1x_gpio1_resources),
+ .resource = ls1x_gpio1_resources,
+};
+
+/* NAND Flash */
+static struct resource ls1x_nand_resources[] = {
+ [0] = {
+ .start = LS1X_NAND_BASE,
+ .end = LS1X_NAND_BASE + SZ_32 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* DMA channel 0 is dedicated to NAND */
+ .start = LS1X_DMA_CHANNEL0,
+ .end = LS1X_DMA_CHANNEL0,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device ls1x_nand_pdev = {
+ .name = "ls1x-nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_nand_resources),
+ .resource = ls1x_nand_resources,
+};
+
+void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata)
+{
+ ls1x_nand_pdev.dev.platform_data = pdata;
+}
+
+/* USB EHCI */
+static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ls1x_ehci_resources[] = {
+ [0] = {
+ .start = LS1X_EHCI_BASE,
+ .end = LS1X_EHCI_BASE + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LS1X_EHCI_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct usb_ehci_pdata ls1x_ehci_pdata = {
+};
+
+struct platform_device ls1x_ehci_pdev = {
+ .name = "ehci-platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_ehci_resources),
+ .resource = ls1x_ehci_resources,
+ .dev = {
+ .dma_mask = &ls1x_ehci_dmamask,
+ .platform_data = &ls1x_ehci_pdata,
+ },
+};
+
+/* Real Time Clock */
+void __init ls1x_rtc_set_extclk(struct platform_device *pdev)
+{
+ u32 val = __raw_readl(LS1X_RTC_CTRL);
+
+ if (!(val & RTC_EXTCLK_OK))
+ __raw_writel(val | RTC_EXTCLK_EN, LS1X_RTC_CTRL);
+}
+
+struct platform_device ls1x_rtc_pdev = {
+ .name = "ls1x-rtc",
+ .id = -1,
+};
+
+/* Watchdog */
+static struct resource ls1x_wdt_resources[] = {
+ {
+ .start = LS1X_WDT_BASE,
+ .end = LS1X_WDT_BASE + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device ls1x_wdt_pdev = {
+ .name = "ls1x-wdt",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_wdt_resources),
+ .resource = ls1x_wdt_resources,
+};
diff --git a/arch/mips/loongson32/common/prom.c b/arch/mips/loongson32/common/prom.c
new file mode 100644
index 0000000..6860098
--- /dev/null
+++ b/arch/mips/loongson32/common/prom.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Modified from arch/mips/pnx833x/common/prom.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/bootinfo.h>
+
+#include <loongson1.h>
+#include <prom.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+unsigned long memsize, highmemsize;
+
+char *prom_getenv(char *envname)
+{
+ char **env = prom_envp;
+ int i;
+
+ i = strlen(envname);
+
+ while (*env) {
+ if (strncmp(envname, *env, i) == 0 && *(*env + i) == '=')
+ return *env + i + 1;
+ env++;
+ }
+
+ return 0;
+}
+
+static inline unsigned long env_or_default(char *env, unsigned long dfl)
+{
+ char *str = prom_getenv(env);
+ return str ? simple_strtol(str, 0, 0) : dfl;
+}
+
+void __init prom_init_cmdline(void)
+{
+ char *c = &(arcs_cmdline[0]);
+ int i;
+
+ for (i = 1; i < prom_argc; i++) {
+ strcpy(c, prom_argv[i]);
+ c += strlen(prom_argv[i]);
+ if (i < prom_argc - 1)
+ *c++ = ' ';
+ }
+ *c = 0;
+}
+
+void __init prom_init(void)
+{
+ void __iomem *uart_base;
+ prom_argc = fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ prom_init_cmdline();
+
+ memsize = env_or_default("memsize", DEFAULT_MEMSIZE);
+ highmemsize = env_or_default("highmemsize", 0x0);
+
+ if (strstr(arcs_cmdline, "console=ttyS3"))
+ uart_base = ioremap_nocache(LS1X_UART3_BASE, 0x0f);
+ else if (strstr(arcs_cmdline, "console=ttyS2"))
+ uart_base = ioremap_nocache(LS1X_UART2_BASE, 0x0f);
+ else if (strstr(arcs_cmdline, "console=ttyS1"))
+ uart_base = ioremap_nocache(LS1X_UART1_BASE, 0x0f);
+ else
+ uart_base = ioremap_nocache(LS1X_UART0_BASE, 0x0f);
+ setup_8250_early_printk_port((unsigned long)uart_base, 0, 0);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/loongson32/common/reset.c b/arch/mips/loongson32/common/reset.c
new file mode 100644
index 0000000..8a1d9cc
--- /dev/null
+++ b/arch/mips/loongson32/common/reset.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/sizes.h>
+#include <asm/idle.h>
+#include <asm/reboot.h>
+
+#include <loongson1.h>
+
+static void __iomem *wdt_reg_base;
+
+static void ls1x_halt(void)
+{
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
+}
+
+static void ls1x_restart(char *command)
+{
+ __raw_writel(0x1, wdt_reg_base + WDT_EN);
+ __raw_writel(0x1, wdt_reg_base + WDT_TIMER);
+ __raw_writel(0x1, wdt_reg_base + WDT_SET);
+
+ ls1x_halt();
+}
+
+static void ls1x_power_off(void)
+{
+ ls1x_halt();
+}
+
+static int __init ls1x_reboot_setup(void)
+{
+ wdt_reg_base = ioremap_nocache(LS1X_WDT_BASE, (SZ_4 + SZ_8));
+ if (!wdt_reg_base)
+ panic("Failed to remap watchdog registers");
+
+ _machine_restart = ls1x_restart;
+ _machine_halt = ls1x_halt;
+ pm_power_off = ls1x_power_off;
+
+ return 0;
+}
+
+arch_initcall(ls1x_reboot_setup);
diff --git a/arch/mips/loongson32/common/setup.c b/arch/mips/loongson32/common/setup.c
new file mode 100644
index 0000000..1640744
--- /dev/null
+++ b/arch/mips/loongson32/common/setup.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bootinfo.h>
+
+#include <prom.h>
+
+void __init plat_mem_setup(void)
+{
+ add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+}
+
+const char *get_system_type(void)
+{
+ unsigned int processor_id = (¤t_cpu_data)->processor_id;
+
+ switch (processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON1B:
+#if defined(CONFIG_LOONGSON1_LS1B)
+ return "LOONGSON LS1B";
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ return "LOONGSON LS1C";
+#endif
+ default:
+ return "LOONGSON (unknown)";
+ }
+}
diff --git a/arch/mips/loongson32/common/time.c b/arch/mips/loongson32/common/time.c
new file mode 100644
index 0000000..1c4332a
--- /dev/null
+++ b/arch/mips/loongson32/common/time.c
@@ -0,0 +1,240 @@
+/*
+ * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/sizes.h>
+#include <asm/time.h>
+
+#include <loongson1.h>
+#include <platform.h>
+
+#ifdef CONFIG_CEVT_CSRC_LS1X
+
+#if defined(CONFIG_TIMER_USE_PWM1)
+#define LS1X_TIMER_BASE LS1X_PWM1_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM1_IRQ
+
+#elif defined(CONFIG_TIMER_USE_PWM2)
+#define LS1X_TIMER_BASE LS1X_PWM2_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM2_IRQ
+
+#elif defined(CONFIG_TIMER_USE_PWM3)
+#define LS1X_TIMER_BASE LS1X_PWM3_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM3_IRQ
+
+#else
+#define LS1X_TIMER_BASE LS1X_PWM0_BASE
+#define LS1X_TIMER_IRQ LS1X_PWM0_IRQ
+#endif
+
+DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
+
+static void __iomem *timer_reg_base;
+static uint32_t ls1x_jiffies_per_tick;
+
+static inline void ls1x_pwmtimer_set_period(uint32_t period)
+{
+ __raw_writel(period, timer_reg_base + PWM_HRC);
+ __raw_writel(period, timer_reg_base + PWM_LRC);
+}
+
+static inline void ls1x_pwmtimer_restart(void)
+{
+ __raw_writel(0x0, timer_reg_base + PWM_CNT);
+ __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
+}
+
+void __init ls1x_pwmtimer_init(void)
+{
+ timer_reg_base = ioremap_nocache(LS1X_TIMER_BASE, SZ_16);
+ if (!timer_reg_base)
+ panic("Failed to remap timer registers");
+
+ ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
+
+ ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
+ ls1x_pwmtimer_restart();
+}
+
+static u64 ls1x_clocksource_read(struct clocksource *cs)
+{
+ unsigned long flags;
+ int count;
+ u32 jifs;
+ static int old_count;
+ static u32 old_jifs;
+
+ raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
+ /*
+ * Although our caller may have the read side of xtime_lock,
+ * this is now a seqlock, and we are cheating in this routine
+ * by having side effects on state that we cannot undo if
+ * there is a collision on the seqlock and our caller has to
+ * retry. (Namely, old_jifs and old_count.) So we must treat
+ * jiffies as volatile despite the lock. We read jiffies
+ * before latching the timer count to guarantee that although
+ * the jiffies value might be older than the count (that is,
+ * the counter may underflow between the last point where
+ * jiffies was incremented and the point where we latch the
+ * count), it cannot be newer.
+ */
+ jifs = jiffies;
+ /* read the count */
+ count = __raw_readl(timer_reg_base + PWM_CNT);
+
+ /*
+ * It's possible for count to appear to go the wrong way for this
+ * reason:
+ *
+ * The timer counter underflows, but we haven't handled the resulting
+ * interrupt and incremented jiffies yet.
+ *
+ * Previous attempts to handle these cases intelligently were buggy, so
+ * we just do the simple thing now.
+ */
+ if (count < old_count && jifs == old_jifs)
+ count = old_count;
+
+ old_count = count;
+ old_jifs = jifs;
+
+ raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
+
+ return (u64) (jifs * ls1x_jiffies_per_tick) + count;
+}
+
+static struct clocksource ls1x_clocksource = {
+ .name = "ls1x-pwmtimer",
+ .read = ls1x_clocksource_read,
+ .mask = CLOCKSOURCE_MASK(24),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static irqreturn_t ls1x_clockevent_isr(int irq, void *devid)
+{
+ struct clock_event_device *cd = devid;
+
+ ls1x_pwmtimer_restart();
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
+}
+
+static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
+{
+ raw_spin_lock(&ls1x_timer_lock);
+ ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
+ ls1x_pwmtimer_restart();
+ __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
+ raw_spin_unlock(&ls1x_timer_lock);
+
+ return 0;
+}
+
+static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
+{
+ raw_spin_lock(&ls1x_timer_lock);
+ __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
+ raw_spin_unlock(&ls1x_timer_lock);
+
+ return 0;
+}
+
+static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd)
+{
+ raw_spin_lock(&ls1x_timer_lock);
+ __raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN,
+ timer_reg_base + PWM_CTRL);
+ raw_spin_unlock(&ls1x_timer_lock);
+
+ return 0;
+}
+
+static int ls1x_clockevent_set_next(unsigned long evt,
+ struct clock_event_device *cd)
+{
+ raw_spin_lock(&ls1x_timer_lock);
+ ls1x_pwmtimer_set_period(evt);
+ ls1x_pwmtimer_restart();
+ raw_spin_unlock(&ls1x_timer_lock);
+
+ return 0;
+}
+
+static struct clock_event_device ls1x_clockevent = {
+ .name = "ls1x-pwmtimer",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .rating = 300,
+ .irq = LS1X_TIMER_IRQ,
+ .set_next_event = ls1x_clockevent_set_next,
+ .set_state_shutdown = ls1x_clockevent_set_state_shutdown,
+ .set_state_periodic = ls1x_clockevent_set_state_periodic,
+ .set_state_oneshot = ls1x_clockevent_set_state_shutdown,
+ .tick_resume = ls1x_clockevent_tick_resume,
+};
+
+static struct irqaction ls1x_pwmtimer_irqaction = {
+ .name = "ls1x-pwmtimer",
+ .handler = ls1x_clockevent_isr,
+ .dev_id = &ls1x_clockevent,
+ .flags = IRQF_PERCPU | IRQF_TIMER,
+};
+
+static void __init ls1x_time_init(void)
+{
+ struct clock_event_device *cd = &ls1x_clockevent;
+ int ret;
+
+ if (!mips_hpt_frequency)
+ panic("Invalid timer clock rate");
+
+ ls1x_pwmtimer_init();
+
+ clockevent_set_clock(cd, mips_hpt_frequency);
+ cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd);
+ cd->max_delta_ticks = 0xffffff;
+ cd->min_delta_ns = clockevent_delta2ns(0x000300, cd);
+ cd->min_delta_ticks = 0x000300;
+ cd->cpumask = cpumask_of(smp_processor_id());
+ clockevents_register_device(cd);
+
+ ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000;
+ ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency);
+ if (ret)
+ panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
+
+ setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction);
+}
+#endif /* CONFIG_CEVT_CSRC_LS1X */
+
+void __init plat_time_init(void)
+{
+ struct clk *clk = NULL;
+
+ /* initialize LS1X clocks */
+ ls1x_clk_init();
+
+#ifdef CONFIG_CEVT_CSRC_LS1X
+ /* setup LS1X PWM timer */
+ clk = clk_get(NULL, "ls1x-pwmtimer");
+ if (IS_ERR(clk))
+ panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
+
+ mips_hpt_frequency = clk_get_rate(clk);
+ ls1x_time_init();
+#else
+ /* setup mips r4k timer */
+ clk = clk_get(NULL, "cpu_clk");
+ if (IS_ERR(clk))
+ panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
+
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
+#endif /* CONFIG_CEVT_CSRC_LS1X */
+}
diff --git a/arch/mips/loongson32/ls1b/Makefile b/arch/mips/loongson32/ls1b/Makefile
new file mode 100644
index 0000000..891eac4
--- /dev/null
+++ b/arch/mips/loongson32/ls1b/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for loongson1B based machines.
+#
+
+obj-y += board.o
diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
new file mode 100644
index 0000000..01aceaa
--- /dev/null
+++ b/arch/mips/loongson32/ls1b/board.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/leds.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sizes.h>
+
+#include <loongson1.h>
+#include <dma.h>
+#include <nand.h>
+#include <platform.h>
+
+struct plat_ls1x_dma ls1x_dma_pdata = {
+ .nr_channels = 3,
+};
+
+static struct mtd_partition ls1x_nand_parts[] = {
+ {
+ .name = "kernel",
+ .offset = 0,
+ .size = SZ_16M,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+struct plat_ls1x_nand ls1x_nand_pdata = {
+ .parts = ls1x_nand_parts,
+ .nr_parts = ARRAY_SIZE(ls1x_nand_parts),
+ .hold_cycle = 0x2,
+ .wait_cycle = 0xc,
+};
+
+static const struct gpio_led ls1x_gpio_leds[] __initconst = {
+ {
+ .name = "LED9",
+ .default_trigger = "heartbeat",
+ .gpio = 38,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }, {
+ .name = "LED6",
+ .default_trigger = "nand-disk",
+ .gpio = 39,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+};
+
+static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
+ .num_leds = ARRAY_SIZE(ls1x_gpio_leds),
+ .leds = ls1x_gpio_leds,
+};
+
+static struct platform_device *ls1b_platform_devices[] __initdata = {
+ &ls1x_uart_pdev,
+ &ls1x_cpufreq_pdev,
+ &ls1x_dma_pdev,
+ &ls1x_eth0_pdev,
+ &ls1x_eth1_pdev,
+ &ls1x_ehci_pdev,
+ &ls1x_gpio0_pdev,
+ &ls1x_gpio1_pdev,
+ &ls1x_nand_pdev,
+ &ls1x_rtc_pdev,
+ &ls1x_wdt_pdev,
+};
+
+static int __init ls1b_platform_init(void)
+{
+ ls1x_serial_set_uartclk(&ls1x_uart_pdev);
+ ls1x_dma_set_platdata(&ls1x_dma_pdata);
+ ls1x_nand_set_platdata(&ls1x_nand_pdata);
+
+ gpio_led_register_device(-1, &ls1x_led_pdata);
+
+ return platform_add_devices(ls1b_platform_devices,
+ ARRAY_SIZE(ls1b_platform_devices));
+}
+
+arch_initcall(ls1b_platform_init);
diff --git a/arch/mips/loongson32/ls1c/Makefile b/arch/mips/loongson32/ls1c/Makefile
new file mode 100644
index 0000000..a92c6cd
--- /dev/null
+++ b/arch/mips/loongson32/ls1c/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for loongson1C based machines.
+#
+
+obj-y += board.o
diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
new file mode 100644
index 0000000..eb2d913
--- /dev/null
+++ b/arch/mips/loongson32/ls1c/board.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2016 Yang Ling <gnaygnil@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <platform.h>
+
+static struct platform_device *ls1c_platform_devices[] __initdata = {
+ &ls1x_uart_pdev,
+ &ls1x_eth0_pdev,
+ &ls1x_rtc_pdev,
+ &ls1x_wdt_pdev,
+};
+
+static int __init ls1c_platform_init(void)
+{
+ ls1x_serial_set_uartclk(&ls1x_uart_pdev);
+ ls1x_rtc_set_extclk(&ls1x_rtc_pdev);
+
+ return platform_add_devices(ls1c_platform_devices,
+ ARRAY_SIZE(ls1c_platform_devices));
+}
+
+arch_initcall(ls1c_platform_init);