v4.19.13 snapshot.
diff --git a/arch/microblaze/pci/Makefile b/arch/microblaze/pci/Makefile
new file mode 100644
index 0000000..d1114fb
--- /dev/null
+++ b/arch/microblaze/pci/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile
+#
+
+obj-$(CONFIG_PCI) += pci-common.o indirect_pci.o iomap.o
+obj-$(CONFIG_PCI_XILINX) += xilinx_pci.o
diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c
new file mode 100644
index 0000000..2403083
--- /dev/null
+++ b/arch/microblaze/pci/indirect_pci.c
@@ -0,0 +1,162 @@
+/*
+ * Support for indirect PCI bridges.
+ *
+ * Copyright (C) 1998 Gabriel Paubert.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <linux/io.h>
+#include <asm/pci-bridge.h>
+
+static int
+indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ volatile void __iomem *cfg_data;
+ u8 cfg_type = 0;
+ u32 bus_no, reg;
+
+ if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
+ if (bus->number != hose->first_busno)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (devfn != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
+ if (bus->number != hose->first_busno)
+ cfg_type = 1;
+
+ bus_no = (bus->number == hose->first_busno) ?
+ hose->self_busno : bus->number;
+
+ if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
+ reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+ else
+ reg = offset & 0xfc; /* Only 3 bits for function */
+
+ if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
+ out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+ (devfn << 8) | reg | cfg_type));
+ else
+ out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+ (devfn << 8) | reg | cfg_type));
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */
+ switch (len) {
+ case 1:
+ *val = in_8(cfg_data);
+ break;
+ case 2:
+ *val = in_le16(cfg_data);
+ break;
+ default:
+ *val = in_le32(cfg_data);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ volatile void __iomem *cfg_data;
+ u8 cfg_type = 0;
+ u32 bus_no, reg;
+
+ if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
+ if (bus->number != hose->first_busno)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (devfn != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
+ if (bus->number != hose->first_busno)
+ cfg_type = 1;
+
+ bus_no = (bus->number == hose->first_busno) ?
+ hose->self_busno : bus->number;
+
+ if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
+ reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+ else
+ reg = offset & 0xfc;
+
+ if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
+ out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+ (devfn << 8) | reg | cfg_type));
+ else
+ out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+ (devfn << 8) | reg | cfg_type));
+
+ /* suppress setting of PCI_PRIMARY_BUS */
+ if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
+ if ((offset == PCI_PRIMARY_BUS) &&
+ (bus->number == hose->first_busno))
+ val &= 0xffffff00;
+
+ /* Workaround for PCI_28 Errata in 440EPx/GRx */
+ if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) &&
+ offset == PCI_CACHE_LINE_SIZE) {
+ val = 0;
+ }
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ cfg_data = hose->cfg_data + (offset & 3);
+ switch (len) {
+ case 1:
+ out_8(cfg_data, val);
+ break;
+ case 2:
+ out_le16(cfg_data, val);
+ break;
+ default:
+ out_le32(cfg_data, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pci_ops = {
+ .read = indirect_read_config,
+ .write = indirect_write_config,
+};
+
+void __init
+setup_indirect_pci(struct pci_controller *hose,
+ resource_size_t cfg_addr,
+ resource_size_t cfg_data, u32 flags)
+{
+ resource_size_t base = cfg_addr & PAGE_MASK;
+ void __iomem *mbase;
+
+ mbase = ioremap(base, PAGE_SIZE);
+ hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK);
+ if ((cfg_data & PAGE_MASK) != base)
+ mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
+ hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK);
+ hose->ops = &indirect_pci_ops;
+ hose->indirect_type = flags;
+}
diff --git a/arch/microblaze/pci/iomap.c b/arch/microblaze/pci/iomap.c
new file mode 100644
index 0000000..bde74af
--- /dev/null
+++ b/arch/microblaze/pci/iomap.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ppc64 "iomap" interface implementation.
+ *
+ * (C) Copyright 2004 Linus Torvalds
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/mm.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <asm/pci-bridge.h>
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+ if (isa_vaddr_is_ioport(addr))
+ return;
+ if (pcibios_vaddr_is_ioport(addr))
+ return;
+ iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
new file mode 100644
index 0000000..2ffd171
--- /dev/null
+++ b/arch/microblaze/pci/pci-common.c
@@ -0,0 +1,1128 @@
+/*
+ * Contains common pci routines for ALL ppc platform
+ * (based on pci_32.c and pci_64.c)
+ *
+ * Port for PPC64 David Engebretsen, IBM Corp.
+ * Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
+ *
+ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Rework, based on alpha PCI code.
+ *
+ * Common pmac/prep/chrp pci routines. -- Cort
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/shmem_fs.h>
+#include <linux/list.h>
+#include <linux/syscalls.h>
+#include <linux/irq.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/export.h>
+
+#include <asm/processor.h>
+#include <linux/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/byteorder.h>
+
+static DEFINE_SPINLOCK(hose_spinlock);
+LIST_HEAD(hose_list);
+
+/* XXX kill that some day ... */
+static int global_phb_number; /* Global phb counter */
+
+/* ISA Memory physical address */
+resource_size_t isa_mem_base;
+
+unsigned long isa_io_base;
+EXPORT_SYMBOL(isa_io_base);
+
+static int pci_bus_count;
+
+struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
+{
+ struct pci_controller *phb;
+
+ phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL);
+ if (!phb)
+ return NULL;
+ spin_lock(&hose_spinlock);
+ phb->global_number = global_phb_number++;
+ list_add_tail(&phb->list_node, &hose_list);
+ spin_unlock(&hose_spinlock);
+ phb->dn = dev;
+ phb->is_dynamic = mem_init_done;
+ return phb;
+}
+
+void pcibios_free_controller(struct pci_controller *phb)
+{
+ spin_lock(&hose_spinlock);
+ list_del(&phb->list_node);
+ spin_unlock(&hose_spinlock);
+
+ if (phb->is_dynamic)
+ kfree(phb);
+}
+
+static resource_size_t pcibios_io_size(const struct pci_controller *hose)
+{
+ return resource_size(&hose->io_resource);
+}
+
+int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+ int ret = 0;
+ struct pci_controller *hose;
+ resource_size_t size;
+
+ spin_lock(&hose_spinlock);
+ list_for_each_entry(hose, &hose_list, list_node) {
+ size = pcibios_io_size(hose);
+ if (address >= hose->io_base_virt &&
+ address < (hose->io_base_virt + size)) {
+ ret = 1;
+ break;
+ }
+ }
+ spin_unlock(&hose_spinlock);
+ return ret;
+}
+
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+ struct pci_controller *hose;
+ resource_size_t size;
+ unsigned long ret = ~0;
+
+ spin_lock(&hose_spinlock);
+ list_for_each_entry(hose, &hose_list, list_node) {
+ size = pcibios_io_size(hose);
+ if (address >= hose->io_base_phys &&
+ address < (hose->io_base_phys + size)) {
+ unsigned long base =
+ (unsigned long)hose->io_base_virt - _IO_BASE;
+ ret = base + (address - hose->io_base_phys);
+ break;
+ }
+ }
+ spin_unlock(&hose_spinlock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pci_address_to_pio);
+
+/* This routine is meant to be used early during boot, when the
+ * PCI bus numbers have not yet been assigned, and you need to
+ * issue PCI config cycles to an OF device.
+ * It could also be used to "fix" RTAS config cycles if you want
+ * to set pci_assign_all_buses to 1 and still use RTAS for PCI
+ * config cycles.
+ */
+struct pci_controller *pci_find_hose_for_OF_device(struct device_node *node)
+{
+ while (node) {
+ struct pci_controller *hose, *tmp;
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+ if (hose->dn == node)
+ return hose;
+ node = node->parent;
+ }
+ return NULL;
+}
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+ /* No special bus mastering setup handling */
+}
+
+/*
+ * Platform support for /proc/bus/pci/X/Y mmap()s.
+ */
+
+int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma)
+{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ resource_size_t ioaddr = pci_resource_start(pdev, bar);
+
+ if (!hose)
+ return -EINVAL; /* should never happen */
+
+ /* Convert to an offset within this PCI controller */
+ ioaddr -= (unsigned long)hose->io_base_virt - _IO_BASE;
+
+ vma->vm_pgoff += (ioaddr + hose->io_base_phys) >> PAGE_SHIFT;
+ return 0;
+}
+
+/*
+ * This one is used by /dev/mem and fbdev who have no clue about the
+ * PCI device, it tries to find the PCI device first and calls the
+ * above routine
+ */
+pgprot_t pci_phys_mem_access_prot(struct file *file,
+ unsigned long pfn,
+ unsigned long size,
+ pgprot_t prot)
+{
+ struct pci_dev *pdev = NULL;
+ struct resource *found = NULL;
+ resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT;
+ int i;
+
+ if (page_is_ram(pfn))
+ return prot;
+
+ prot = pgprot_noncached(prot);
+ for_each_pci_dev(pdev) {
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ struct resource *rp = &pdev->resource[i];
+ int flags = rp->flags;
+
+ /* Active and same type? */
+ if ((flags & IORESOURCE_MEM) == 0)
+ continue;
+ /* In the range of this resource? */
+ if (offset < (rp->start & PAGE_MASK) ||
+ offset > rp->end)
+ continue;
+ found = rp;
+ break;
+ }
+ if (found)
+ break;
+ }
+ if (found) {
+ if (found->flags & IORESOURCE_PREFETCH)
+ prot = pgprot_noncached_wc(prot);
+ pci_dev_put(pdev);
+ }
+
+ pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n",
+ (unsigned long long)offset, pgprot_val(prot));
+
+ return prot;
+}
+
+/* This provides legacy IO read access on a bus */
+int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
+{
+ unsigned long offset;
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct resource *rp = &hose->io_resource;
+ void __iomem *addr;
+
+ /* Check if port can be supported by that bus. We only check
+ * the ranges of the PHB though, not the bus itself as the rules
+ * for forwarding legacy cycles down bridges are not our problem
+ * here. So if the host bridge supports it, we do it.
+ */
+ offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+ offset += port;
+
+ if (!(rp->flags & IORESOURCE_IO))
+ return -ENXIO;
+ if (offset < rp->start || (offset + size) > rp->end)
+ return -ENXIO;
+ addr = hose->io_base_virt + port;
+
+ switch (size) {
+ case 1:
+ *((u8 *)val) = in_8(addr);
+ return 1;
+ case 2:
+ if (port & 1)
+ return -EINVAL;
+ *((u16 *)val) = in_le16(addr);
+ return 2;
+ case 4:
+ if (port & 3)
+ return -EINVAL;
+ *((u32 *)val) = in_le32(addr);
+ return 4;
+ }
+ return -EINVAL;
+}
+
+/* This provides legacy IO write access on a bus */
+int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
+{
+ unsigned long offset;
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct resource *rp = &hose->io_resource;
+ void __iomem *addr;
+
+ /* Check if port can be supported by that bus. We only check
+ * the ranges of the PHB though, not the bus itself as the rules
+ * for forwarding legacy cycles down bridges are not our problem
+ * here. So if the host bridge supports it, we do it.
+ */
+ offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+ offset += port;
+
+ if (!(rp->flags & IORESOURCE_IO))
+ return -ENXIO;
+ if (offset < rp->start || (offset + size) > rp->end)
+ return -ENXIO;
+ addr = hose->io_base_virt + port;
+
+ /* WARNING: The generic code is idiotic. It gets passed a pointer
+ * to what can be a 1, 2 or 4 byte quantity and always reads that
+ * as a u32, which means that we have to correct the location of
+ * the data read within those 32 bits for size 1 and 2
+ */
+ switch (size) {
+ case 1:
+ out_8(addr, val >> 24);
+ return 1;
+ case 2:
+ if (port & 1)
+ return -EINVAL;
+ out_le16(addr, val >> 16);
+ return 2;
+ case 4:
+ if (port & 3)
+ return -EINVAL;
+ out_le32(addr, val);
+ return 4;
+ }
+ return -EINVAL;
+}
+
+/* This provides legacy IO or memory mmap access on a bus */
+int pci_mmap_legacy_page_range(struct pci_bus *bus,
+ struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ resource_size_t offset =
+ ((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
+ resource_size_t size = vma->vm_end - vma->vm_start;
+ struct resource *rp;
+
+ pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n",
+ pci_domain_nr(bus), bus->number,
+ mmap_state == pci_mmap_mem ? "MEM" : "IO",
+ (unsigned long long)offset,
+ (unsigned long long)(offset + size - 1));
+
+ if (mmap_state == pci_mmap_mem) {
+ /* Hack alert !
+ *
+ * Because X is lame and can fail starting if it gets an error
+ * trying to mmap legacy_mem (instead of just moving on without
+ * legacy memory access) we fake it here by giving it anonymous
+ * memory, effectively behaving just like /dev/zero
+ */
+ if ((offset + size) > hose->isa_mem_size) {
+#ifdef CONFIG_MMU
+ pr_debug("Process %s (pid:%d) mapped non-existing PCI",
+ current->comm, current->pid);
+ pr_debug("legacy memory for 0%04x:%02x\n",
+ pci_domain_nr(bus), bus->number);
+#endif
+ if (vma->vm_flags & VM_SHARED)
+ return shmem_zero_setup(vma);
+ return 0;
+ }
+ offset += hose->isa_mem_phys;
+ } else {
+ unsigned long io_offset = (unsigned long)hose->io_base_virt -
+ _IO_BASE;
+ unsigned long roffset = offset + io_offset;
+ rp = &hose->io_resource;
+ if (!(rp->flags & IORESOURCE_IO))
+ return -ENXIO;
+ if (roffset < rp->start || (roffset + size) > rp->end)
+ return -ENXIO;
+ offset += hose->io_base_phys;
+ }
+ pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
+
+ vma->vm_pgoff = offset >> PAGE_SHIFT;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot);
+}
+
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+ const struct resource *rsrc,
+ resource_size_t *start, resource_size_t *end)
+{
+ struct pci_bus_region region;
+
+ if (rsrc->flags & IORESOURCE_IO) {
+ pcibios_resource_to_bus(dev->bus, ®ion,
+ (struct resource *) rsrc);
+ *start = region.start;
+ *end = region.end;
+ return;
+ }
+
+ /* We pass a CPU physical address to userland for MMIO instead of a
+ * BAR value because X is lame and expects to be able to use that
+ * to pass to /dev/mem!
+ *
+ * That means we may have 64-bit values where some apps only expect
+ * 32 (like X itself since it thinks only Sparc has 64-bit MMIO).
+ */
+ *start = rsrc->start;
+ *end = rsrc->end;
+}
+
+/**
+ * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
+ * @hose: newly allocated pci_controller to be setup
+ * @dev: device node of the host bridge
+ * @primary: set if primary bus (32 bits only, soon to be deprecated)
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping of a pci controller based on its
+ * content.
+ *
+ * Life would be boring if it wasn't for a few issues that we have to deal
+ * with here:
+ *
+ * - We can only cope with one IO space range and up to 3 Memory space
+ * ranges. However, some machines (thanks Apple !) tend to split their
+ * space into lots of small contiguous ranges. So we have to coalesce.
+ *
+ * - We can only cope with all memory ranges having the same offset
+ * between CPU addresses and PCI addresses. Unfortunately, some bridges
+ * are setup for a large 1:1 mapping along with a small "window" which
+ * maps PCI address 0 to some arbitrary high address of the CPU space in
+ * order to give access to the ISA memory hole.
+ * The way out of here that I've chosen for now is to always set the
+ * offset based on the first resource found, then override it if we
+ * have a different offset and the previous was set by an ISA hole.
+ *
+ * - Some busses have IO space not starting at 0, which causes trouble with
+ * the way we do our IO resource renumbering. The code somewhat deals with
+ * it for 64 bits but I would expect problems on 32 bits.
+ *
+ * - Some 32 bits platforms such as 4xx can have physical space larger than
+ * 32 bits so we need to use 64 bits values for the parsing
+ */
+void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+ struct device_node *dev, int primary)
+{
+ int memno = 0, isa_hole = -1;
+ unsigned long long isa_mb = 0;
+ struct resource *res;
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+
+ pr_info("PCI host bridge %pOF %s ranges:\n",
+ dev, primary ? "(primary)" : "");
+
+ /* Check for ranges property */
+ if (of_pci_range_parser_init(&parser, dev))
+ return;
+
+ pr_debug("Parsing ranges property...\n");
+ for_each_of_pci_range(&parser, &range) {
+ /* Read next ranges element */
+ pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
+ range.pci_space, range.pci_addr);
+ pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
+ range.cpu_addr, range.size);
+
+ /* If we failed translation or got a zero-sized region
+ * (some FW try to feed us with non sensical zero sized regions
+ * such as power3 which look like some kind of attempt
+ * at exposing the VGA memory hole)
+ */
+ if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
+ continue;
+
+ /* Act based on address space type */
+ res = NULL;
+ switch (range.flags & IORESOURCE_TYPE_BITS) {
+ case IORESOURCE_IO:
+ pr_info(" IO 0x%016llx..0x%016llx -> 0x%016llx\n",
+ range.cpu_addr, range.cpu_addr + range.size - 1,
+ range.pci_addr);
+
+ /* We support only one IO range */
+ if (hose->pci_io_size) {
+ pr_info(" \\--> Skipped (too many) !\n");
+ continue;
+ }
+ /* On 32 bits, limit I/O space to 16MB */
+ if (range.size > 0x01000000)
+ range.size = 0x01000000;
+
+ /* 32 bits needs to map IOs here */
+ hose->io_base_virt = ioremap(range.cpu_addr,
+ range.size);
+
+ /* Expect trouble if pci_addr is not 0 */
+ if (primary)
+ isa_io_base =
+ (unsigned long)hose->io_base_virt;
+ /* pci_io_size and io_base_phys always represent IO
+ * space starting at 0 so we factor in pci_addr
+ */
+ hose->pci_io_size = range.pci_addr + range.size;
+ hose->io_base_phys = range.cpu_addr - range.pci_addr;
+
+ /* Build resource */
+ res = &hose->io_resource;
+ range.cpu_addr = range.pci_addr;
+
+ break;
+ case IORESOURCE_MEM:
+ pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
+ range.cpu_addr, range.cpu_addr + range.size - 1,
+ range.pci_addr,
+ (range.pci_space & 0x40000000) ?
+ "Prefetch" : "");
+
+ /* We support only 3 memory ranges */
+ if (memno >= 3) {
+ pr_info(" \\--> Skipped (too many) !\n");
+ continue;
+ }
+ /* Handles ISA memory hole space here */
+ if (range.pci_addr == 0) {
+ isa_mb = range.cpu_addr;
+ isa_hole = memno;
+ if (primary || isa_mem_base == 0)
+ isa_mem_base = range.cpu_addr;
+ hose->isa_mem_phys = range.cpu_addr;
+ hose->isa_mem_size = range.size;
+ }
+
+ /* We get the PCI/Mem offset from the first range or
+ * the, current one if the offset came from an ISA
+ * hole. If they don't match, bugger.
+ */
+ if (memno == 0 ||
+ (isa_hole >= 0 && range.pci_addr != 0 &&
+ hose->pci_mem_offset == isa_mb))
+ hose->pci_mem_offset = range.cpu_addr -
+ range.pci_addr;
+ else if (range.pci_addr != 0 &&
+ hose->pci_mem_offset != range.cpu_addr -
+ range.pci_addr) {
+ pr_info(" \\--> Skipped (offset mismatch) !\n");
+ continue;
+ }
+
+ /* Build resource */
+ res = &hose->mem_resources[memno++];
+ break;
+ }
+ if (res != NULL) {
+ res->name = dev->full_name;
+ res->flags = range.flags;
+ res->start = range.cpu_addr;
+ res->end = range.cpu_addr + range.size - 1;
+ res->parent = res->child = res->sibling = NULL;
+ }
+ }
+
+ /* If there's an ISA hole and the pci_mem_offset is -not- matching
+ * the ISA hole offset, then we need to remove the ISA hole from
+ * the resource list for that brige
+ */
+ if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+ unsigned int next = isa_hole + 1;
+ pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb);
+ if (next < memno)
+ memmove(&hose->mem_resources[isa_hole],
+ &hose->mem_resources[next],
+ sizeof(struct resource) * (memno - next));
+ hose->mem_resources[--memno].flags = 0;
+ }
+}
+
+/* Display the domain number in /proc */
+int pci_proc_domain(struct pci_bus *bus)
+{
+ return pci_domain_nr(bus);
+}
+
+/* This header fixup will do the resource fixup for all devices as they are
+ * probed, but not for bridge ranges
+ */
+static void pcibios_fixup_resources(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ int i;
+
+ if (!hose) {
+ pr_err("No host bridge for PCI dev %s !\n",
+ pci_name(dev));
+ return;
+ }
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ struct resource *res = dev->resource + i;
+ if (!res->flags)
+ continue;
+ if (res->start == 0) {
+ pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]",
+ pci_name(dev), i,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned int)res->flags);
+ pr_debug("is unassigned\n");
+ res->end -= res->start;
+ res->start = 0;
+ res->flags |= IORESOURCE_UNSET;
+ continue;
+ }
+
+ pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]\n",
+ pci_name(dev), i,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned int)res->flags);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
+
+int pcibios_add_device(struct pci_dev *dev)
+{
+ dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL(pcibios_add_device);
+
+/*
+ * Reparent resource children of pr that conflict with res
+ * under res, and make res replace those children.
+ */
+static int __init reparent_resources(struct resource *parent,
+ struct resource *res)
+{
+ struct resource *p, **pp;
+ struct resource **firstpp = NULL;
+
+ for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
+ if (p->end < res->start)
+ continue;
+ if (res->end < p->start)
+ break;
+ if (p->start < res->start || p->end > res->end)
+ return -1; /* not completely contained */
+ if (firstpp == NULL)
+ firstpp = pp;
+ }
+ if (firstpp == NULL)
+ return -1; /* didn't find any conflicting entries? */
+ res->parent = parent;
+ res->child = *firstpp;
+ res->sibling = *pp;
+ *firstpp = res;
+ *pp = NULL;
+ for (p = res->child; p != NULL; p = p->sibling) {
+ p->parent = res;
+ pr_debug("PCI: Reparented %s [%llx..%llx] under %s\n",
+ p->name,
+ (unsigned long long)p->start,
+ (unsigned long long)p->end, res->name);
+ }
+ return 0;
+}
+
+/*
+ * Handle resources of PCI devices. If the world were perfect, we could
+ * just allocate all the resource regions and do nothing more. It isn't.
+ * On the other hand, we cannot just re-allocate all devices, as it would
+ * require us to know lots of host bridge internals. So we attempt to
+ * keep as much of the original configuration as possible, but tweak it
+ * when it's found to be wrong.
+ *
+ * Known BIOS problems we have to work around:
+ * - I/O or memory regions not configured
+ * - regions configured, but not enabled in the command register
+ * - bogus I/O addresses above 64K used
+ * - expansion ROMs left enabled (this may sound harmless, but given
+ * the fact the PCI specs explicitly allow address decoders to be
+ * shared between expansion ROMs and other resource regions, it's
+ * at least dangerous)
+ *
+ * Our solution:
+ * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ * This gives us fixed barriers on where we can allocate.
+ * (2) Allocate resources for all enabled devices. If there is
+ * a collision, just mark the resource as unallocated. Also
+ * disable expansion ROMs during this step.
+ * (3) Try to allocate resources for disabled devices. If the
+ * resources were assigned correctly, everything goes well,
+ * if they weren't, they won't disturb allocation of other
+ * resources.
+ * (4) Assign new addresses to resources which were either
+ * not configured at all or misconfigured. If explicitly
+ * requested by the user, configure expansion ROM address
+ * as well.
+ */
+
+static void pcibios_allocate_bus_resources(struct pci_bus *bus)
+{
+ struct pci_bus *b;
+ int i;
+ struct resource *res, *pr;
+
+ pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
+ pci_domain_nr(bus), bus->number);
+
+ pci_bus_for_each_resource(bus, res, i) {
+ if (!res || !res->flags
+ || res->start > res->end || res->parent)
+ continue;
+ if (bus->parent == NULL)
+ pr = (res->flags & IORESOURCE_IO) ?
+ &ioport_resource : &iomem_resource;
+ else {
+ /* Don't bother with non-root busses when
+ * re-assigning all resources. We clear the
+ * resource flags as if they were colliding
+ * and as such ensure proper re-allocation
+ * later.
+ */
+ pr = pci_find_parent_resource(bus->self, res);
+ if (pr == res) {
+ /* this happens when the generic PCI
+ * code (wrongly) decides that this
+ * bridge is transparent -- paulus
+ */
+ continue;
+ }
+ }
+
+ pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx ",
+ bus->self ? pci_name(bus->self) : "PHB",
+ bus->number, i,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
+ pr_debug("[0x%x], parent %p (%s)\n",
+ (unsigned int)res->flags,
+ pr, (pr && pr->name) ? pr->name : "nil");
+
+ if (pr && !(pr->flags & IORESOURCE_UNSET)) {
+ struct pci_dev *dev = bus->self;
+
+ if (request_resource(pr, res) == 0)
+ continue;
+ /*
+ * Must be a conflict with an existing entry.
+ * Move that entry (or entries) under the
+ * bridge resource and try again.
+ */
+ if (reparent_resources(pr, res) == 0)
+ continue;
+
+ if (dev && i < PCI_BRIDGE_RESOURCE_NUM &&
+ pci_claim_bridge_resource(dev,
+ i + PCI_BRIDGE_RESOURCES) == 0)
+ continue;
+
+ }
+ pr_warn("PCI: Cannot allocate resource region ");
+ pr_cont("%d of PCI bridge %d, will remap\n", i, bus->number);
+ res->start = res->end = 0;
+ res->flags = 0;
+ }
+
+ list_for_each_entry(b, &bus->children, node)
+ pcibios_allocate_bus_resources(b);
+}
+
+static inline void alloc_resource(struct pci_dev *dev, int idx)
+{
+ struct resource *pr, *r = &dev->resource[idx];
+
+ pr_debug("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n",
+ pci_name(dev), idx,
+ (unsigned long long)r->start,
+ (unsigned long long)r->end,
+ (unsigned int)r->flags);
+
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || (pr->flags & IORESOURCE_UNSET) ||
+ request_resource(pr, r) < 0) {
+ pr_warn("PCI: Cannot allocate resource region %d ", idx);
+ pr_cont("of device %s, will remap\n", pci_name(dev));
+ if (pr)
+ pr_debug("PCI: parent is %p: %016llx-%016llx [%x]\n",
+ pr,
+ (unsigned long long)pr->start,
+ (unsigned long long)pr->end,
+ (unsigned int)pr->flags);
+ /* We'll assign a new address later */
+ r->flags |= IORESOURCE_UNSET;
+ r->end -= r->start;
+ r->start = 0;
+ }
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+ struct pci_dev *dev = NULL;
+ int idx, disabled;
+ u16 command;
+ struct resource *r;
+
+ for_each_pci_dev(dev) {
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
+ r = &dev->resource[idx];
+ if (r->parent) /* Already allocated */
+ continue;
+ if (!r->flags || (r->flags & IORESOURCE_UNSET))
+ continue; /* Not assigned at all */
+ /* We only allocate ROMs on pass 1 just in case they
+ * have been screwed up by firmware
+ */
+ if (idx == PCI_ROM_RESOURCE)
+ disabled = 1;
+ if (r->flags & IORESOURCE_IO)
+ disabled = !(command & PCI_COMMAND_IO);
+ else
+ disabled = !(command & PCI_COMMAND_MEMORY);
+ if (pass == disabled)
+ alloc_resource(dev, idx);
+ }
+ if (pass)
+ continue;
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (r->flags) {
+ /* Turn the ROM off, leave the resource region,
+ * but keep it unregistered.
+ */
+ u32 reg;
+ pci_read_config_dword(dev, dev->rom_base_reg, ®);
+ if (reg & PCI_ROM_ADDRESS_ENABLE) {
+ pr_debug("PCI: Switching off ROM of %s\n",
+ pci_name(dev));
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_write_config_dword(dev, dev->rom_base_reg,
+ reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
+ }
+ }
+}
+
+static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ resource_size_t offset;
+ struct resource *res, *pres;
+ int i;
+
+ pr_debug("Reserving legacy ranges for domain %04x\n",
+ pci_domain_nr(bus));
+
+ /* Check for IO */
+ if (!(hose->io_resource.flags & IORESOURCE_IO))
+ goto no_io;
+ offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+ BUG_ON(res == NULL);
+ res->name = "Legacy IO";
+ res->flags = IORESOURCE_IO;
+ res->start = offset;
+ res->end = (offset + 0xfff) & 0xfffffffful;
+ pr_debug("Candidate legacy IO: %pR\n", res);
+ if (request_resource(&hose->io_resource, res)) {
+ pr_debug("PCI %04x:%02x Cannot reserve Legacy IO %pR\n",
+ pci_domain_nr(bus), bus->number, res);
+ kfree(res);
+ }
+
+ no_io:
+ /* Check for memory */
+ offset = hose->pci_mem_offset;
+ pr_debug("hose mem offset: %016llx\n", (unsigned long long)offset);
+ for (i = 0; i < 3; i++) {
+ pres = &hose->mem_resources[i];
+ if (!(pres->flags & IORESOURCE_MEM))
+ continue;
+ pr_debug("hose mem res: %pR\n", pres);
+ if ((pres->start - offset) <= 0xa0000 &&
+ (pres->end - offset) >= 0xbffff)
+ break;
+ }
+ if (i >= 3)
+ return;
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+ BUG_ON(res == NULL);
+ res->name = "Legacy VGA memory";
+ res->flags = IORESOURCE_MEM;
+ res->start = 0xa0000 + offset;
+ res->end = 0xbffff + offset;
+ pr_debug("Candidate VGA memory: %pR\n", res);
+ if (request_resource(pres, res)) {
+ pr_debug("PCI %04x:%02x Cannot reserve VGA memory %pR\n",
+ pci_domain_nr(bus), bus->number, res);
+ kfree(res);
+ }
+}
+
+void __init pcibios_resource_survey(void)
+{
+ struct pci_bus *b;
+
+ /* Allocate and assign resources. If we re-assign everything, then
+ * we skip the allocate phase
+ */
+ list_for_each_entry(b, &pci_root_buses, node)
+ pcibios_allocate_bus_resources(b);
+
+ pcibios_allocate_resources(0);
+ pcibios_allocate_resources(1);
+
+ /* Before we start assigning unassigned resource, we try to reserve
+ * the low IO area and the VGA memory area if they intersect the
+ * bus available resources to avoid allocating things on top of them
+ */
+ list_for_each_entry(b, &pci_root_buses, node)
+ pcibios_reserve_legacy_regions(b);
+
+ /* Now proceed to assigning things that were left unassigned */
+ pr_debug("PCI: Assigning unassigned resources...\n");
+ pci_assign_unassigned_resources();
+}
+
+static void pcibios_setup_phb_resources(struct pci_controller *hose,
+ struct list_head *resources)
+{
+ unsigned long io_offset;
+ struct resource *res;
+ int i;
+
+ /* Hookup PHB IO resource */
+ res = &hose->io_resource;
+
+ /* Fixup IO space offset */
+ io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
+ res->start = (res->start + io_offset) & 0xffffffffu;
+ res->end = (res->end + io_offset) & 0xffffffffu;
+
+ if (!res->flags) {
+ pr_warn("PCI: I/O resource not set for host ");
+ pr_cont("bridge %pOF (domain %d)\n",
+ hose->dn, hose->global_number);
+ /* Workaround for lack of IO resource only on 32-bit */
+ res->start = (unsigned long)hose->io_base_virt - isa_io_base;
+ res->end = res->start + IO_SPACE_LIMIT;
+ res->flags = IORESOURCE_IO;
+ }
+ pci_add_resource_offset(resources, res,
+ (__force resource_size_t)(hose->io_base_virt - _IO_BASE));
+
+ pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned long)res->flags);
+
+ /* Hookup PHB Memory resources */
+ for (i = 0; i < 3; ++i) {
+ res = &hose->mem_resources[i];
+ if (!res->flags) {
+ if (i > 0)
+ continue;
+ pr_err("PCI: Memory resource 0 not set for ");
+ pr_cont("host bridge %pOF (domain %d)\n",
+ hose->dn, hose->global_number);
+
+ /* Workaround for lack of MEM resource only on 32-bit */
+ res->start = hose->pci_mem_offset;
+ res->end = (resource_size_t)-1LL;
+ res->flags = IORESOURCE_MEM;
+
+ }
+ pci_add_resource_offset(resources, res, hose->pci_mem_offset);
+
+ pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n",
+ i, (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned long)res->flags);
+ }
+
+ pr_debug("PCI: PHB MEM offset = %016llx\n",
+ (unsigned long long)hose->pci_mem_offset);
+ pr_debug("PCI: PHB IO offset = %08lx\n",
+ (unsigned long)hose->io_base_virt - _IO_BASE);
+}
+
+static void pcibios_scan_phb(struct pci_controller *hose)
+{
+ LIST_HEAD(resources);
+ struct pci_bus *bus;
+ struct device_node *node = hose->dn;
+
+ pr_debug("PCI: Scanning PHB %pOF\n", node);
+
+ pcibios_setup_phb_resources(hose, &resources);
+
+ bus = pci_scan_root_bus(hose->parent, hose->first_busno,
+ hose->ops, hose, &resources);
+ if (bus == NULL) {
+ pr_err("Failed to create bus for PCI domain %04x\n",
+ hose->global_number);
+ pci_free_resource_list(&resources);
+ return;
+ }
+ bus->busn_res.start = hose->first_busno;
+ hose->bus = bus;
+
+ hose->last_busno = bus->busn_res.end;
+}
+
+static int __init pcibios_init(void)
+{
+ struct pci_controller *hose, *tmp;
+ int next_busno = 0;
+
+ pr_info("PCI: Probing PCI hardware\n");
+
+ /* Scan all of the recorded PCI controllers. */
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+ hose->last_busno = 0xff;
+ pcibios_scan_phb(hose);
+ if (next_busno <= hose->last_busno)
+ next_busno = hose->last_busno + 1;
+ }
+ pci_bus_count = next_busno;
+
+ /* Call common code to handle resource allocation */
+ pcibios_resource_survey();
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+ if (hose->bus)
+ pci_bus_add_devices(hose->bus);
+ }
+
+ return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+static struct pci_controller *pci_bus_to_hose(int bus)
+{
+ struct pci_controller *hose, *tmp;
+
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+ if (bus >= hose->first_busno && bus <= hose->last_busno)
+ return hose;
+ return NULL;
+}
+
+/* Provide information on locations of various I/O regions in physical
+ * memory. Do this on a per-card basis so that we choose the right
+ * root bridge.
+ * Note that the returned IO or memory base is a physical address
+ */
+
+long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
+{
+ struct pci_controller *hose;
+ long result = -EOPNOTSUPP;
+
+ hose = pci_bus_to_hose(bus);
+ if (!hose)
+ return -ENODEV;
+
+ switch (which) {
+ case IOBASE_BRIDGE_NUMBER:
+ return (long)hose->first_busno;
+ case IOBASE_MEMORY:
+ return (long)hose->pci_mem_offset;
+ case IOBASE_IO:
+ return (long)hose->io_base_phys;
+ case IOBASE_ISA_IO:
+ return (long)isa_io_base;
+ case IOBASE_ISA_MEM:
+ return (long)isa_mem_base;
+ }
+
+ return result;
+}
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type) \
+static int \
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
+{ \
+ return PCIBIOS_DEVICE_NOT_FOUND; \
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops = {
+ .read = null_read_config,
+ .write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+ static struct pci_bus bus;
+
+ if (!hose)
+ pr_err("Can't find hose for PCI bus %d!\n", busnr);
+
+ bus.number = busnr;
+ bus.sysdata = hose;
+ bus.ops = hose ? hose->ops : &null_pci_ops;
+ return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type) \
+int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
+ int devfn, int offset, type value) \
+{ \
+ return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
+ devfn, offset, value); \
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+ int cap)
+{
+ return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
+
diff --git a/arch/microblaze/pci/xilinx_pci.c b/arch/microblaze/pci/xilinx_pci.c
new file mode 100644
index 0000000..b800909
--- /dev/null
+++ b/arch/microblaze/pci/xilinx_pci.c
@@ -0,0 +1,170 @@
+/*
+ * PCI support for Xilinx plbv46_pci soft-core which can be used on
+ * Xilinx Virtex ML410 / ML510 boards.
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
+ * by Benjamin Herrenschmidt.
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+
+#define XPLB_PCI_ADDR 0x10c
+#define XPLB_PCI_DATA 0x110
+#define XPLB_PCI_BUS 0x114
+
+#define PCI_HOST_ENABLE_CMD (PCI_COMMAND_SERR | PCI_COMMAND_PARITY | \
+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY)
+
+static struct of_device_id xilinx_pci_match[] = {
+ { .compatible = "xlnx,plbv46-pci-1.03.a", },
+ {}
+};
+
+/**
+ * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
+ */
+static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
+{
+ struct pci_controller *hose;
+ int i;
+
+ if (dev->devfn || dev->bus->self)
+ return;
+
+ hose = pci_bus_to_host(dev->bus);
+ if (!hose)
+ return;
+
+ if (!of_match_node(xilinx_pci_match, hose->dn))
+ return;
+
+ /* Hide the PCI host BARs from the kernel as their content doesn't
+ * fit well in the resource management
+ */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+
+ dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
+ pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
+
+#ifdef DEBUG
+/**
+ * xilinx_pci_exclude_device - Don't do config access for non-root bus
+ *
+ * This is a hack. Config access to any bus other than bus 0 does not
+ * currently work on the ML510 so we prevent it here.
+ */
+static int
+xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
+{
+ return (bus != 0);
+}
+
+/**
+ * xilinx_early_pci_scan - List pci config space for available devices
+ *
+ * List pci devices in very early phase.
+ */
+static void __init xilinx_early_pci_scan(struct pci_controller *hose)
+{
+ u32 bus = 0;
+ u32 val, dev, func, offset;
+
+ /* Currently we have only 2 device connected - up-to 32 devices */
+ for (dev = 0; dev < 2; dev++) {
+ /* List only first function number - up-to 8 functions */
+ for (func = 0; func < 1; func++) {
+ pr_info("%02x:%02x:%02x", bus, dev, func);
+ /* read the first 64 standardized bytes */
+ /* Up-to 192 bytes can be list of capabilities */
+ for (offset = 0; offset < 64; offset += 4) {
+ early_read_config_dword(hose, bus,
+ PCI_DEVFN(dev, func), offset, &val);
+ if (offset == 0 && val == 0xFFFFFFFF) {
+ pr_cont("\nABSENT");
+ break;
+ }
+ if (!(offset % 0x10))
+ pr_cont("\n%04x: ", offset);
+
+ pr_cont("%08x ", val);
+ }
+ pr_info("\n");
+ }
+ }
+}
+#else
+static void __init xilinx_early_pci_scan(struct pci_controller *hose)
+{
+}
+#endif
+
+/**
+ * xilinx_pci_init - Find and register a Xilinx PCI host bridge
+ */
+void __init xilinx_pci_init(void)
+{
+ struct pci_controller *hose;
+ struct resource r;
+ void __iomem *pci_reg;
+ struct device_node *pci_node;
+
+ pci_node = of_find_matching_node(NULL, xilinx_pci_match);
+ if (!pci_node)
+ return;
+
+ if (of_address_to_resource(pci_node, 0, &r)) {
+ pr_err("xilinx-pci: cannot resolve base address\n");
+ return;
+ }
+
+ hose = pcibios_alloc_controller(pci_node);
+ if (!hose) {
+ pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
+ return;
+ }
+
+ /* Setup config space */
+ setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
+ r.start + XPLB_PCI_DATA,
+ INDIRECT_TYPE_SET_CFG_TYPE);
+
+ /* According to the xilinx plbv46_pci documentation the soft-core starts
+ * a self-init when the bus master enable bit is set. Without this bit
+ * set the pci bus can't be scanned.
+ */
+ early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
+
+ /* Set the max latency timer to 255 */
+ early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
+
+ /* Set the max bus number to 255, and bus/subbus no's to 0 */
+ pci_reg = of_iomap(pci_node, 0);
+ WARN_ON(!pci_reg);
+ out_be32(pci_reg + XPLB_PCI_BUS, 0x000000ff);
+ iounmap(pci_reg);
+
+ /* Register the host bridge with the linux kernel! */
+ pci_process_bridge_OF_ranges(hose, pci_node,
+ INDIRECT_TYPE_SET_CFG_TYPE);
+
+ pr_info("xilinx-pci: Registered PCI host bridge\n");
+ xilinx_early_pci_scan(hose);
+}