v4.19.13 snapshot.
diff --git a/arch/arm64/kernel/hibernate-asm.S b/arch/arm64/kernel/hibernate-asm.S
new file mode 100644
index 0000000..dd14ab8
--- /dev/null
+++ b/arch/arm64/kernel/hibernate-asm.S
@@ -0,0 +1,178 @@
+/*
+ * Hibernate low-level support
+ *
+ * Copyright (C) 2016 ARM Ltd.
+ * Author: James Morse <james.morse@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/linkage.h>
+#include <linux/errno.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/cputype.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+#include <asm/virt.h>
+
+/*
+ * To prevent the possibility of old and new partial table walks being visible
+ * in the tlb, switch the ttbr to a zero page when we invalidate the old
+ * records. D4.7.1 'General TLB maintenance requirements' in ARM DDI 0487A.i
+ * Even switching to our copied tables will cause a changed output address at
+ * each stage of the walk.
+ */
+.macro break_before_make_ttbr_switch zero_page, page_table, tmp
+ phys_to_ttbr \tmp, \zero_page
+ msr ttbr1_el1, \tmp
+ isb
+ tlbi vmalle1
+ dsb nsh
+ phys_to_ttbr \tmp, \page_table
+ msr ttbr1_el1, \tmp
+ isb
+.endm
+
+
+/*
+ * Resume from hibernate
+ *
+ * Loads temporary page tables then restores the memory image.
+ * Finally branches to cpu_resume() to restore the state saved by
+ * swsusp_arch_suspend().
+ *
+ * Because this code has to be copied to a 'safe' page, it can't call out to
+ * other functions by PC-relative address. Also remember that it may be
+ * mid-way through over-writing other functions. For this reason it contains
+ * code from flush_icache_range() and uses the copy_page() macro.
+ *
+ * This 'safe' page is mapped via ttbr0, and executed from there. This function
+ * switches to a copy of the linear map in ttbr1, performs the restore, then
+ * switches ttbr1 to the original kernel's swapper_pg_dir.
+ *
+ * All of memory gets written to, including code. We need to clean the kernel
+ * text to the Point of Coherence (PoC) before secondary cores can be booted.
+ * Because the kernel modules and executable pages mapped to user space are
+ * also written as data, we clean all pages we touch to the Point of
+ * Unification (PoU).
+ *
+ * x0: physical address of temporary page tables
+ * x1: physical address of swapper page tables
+ * x2: address of cpu_resume
+ * x3: linear map address of restore_pblist in the current kernel
+ * x4: physical address of __hyp_stub_vectors, or 0
+ * x5: physical address of a zero page that remains zero after resume
+ */
+.pushsection ".hibernate_exit.text", "ax"
+ENTRY(swsusp_arch_suspend_exit)
+ /*
+ * We execute from ttbr0, change ttbr1 to our copied linear map tables
+ * with a break-before-make via the zero page
+ */
+ break_before_make_ttbr_switch x5, x0, x6
+
+ mov x21, x1
+ mov x30, x2
+ mov x24, x4
+ mov x25, x5
+
+ /* walk the restore_pblist and use copy_page() to over-write memory */
+ mov x19, x3
+
+1: ldr x10, [x19, #HIBERN_PBE_ORIG]
+ mov x0, x10
+ ldr x1, [x19, #HIBERN_PBE_ADDR]
+
+ copy_page x0, x1, x2, x3, x4, x5, x6, x7, x8, x9
+
+ add x1, x10, #PAGE_SIZE
+ /* Clean the copied page to PoU - based on flush_icache_range() */
+ raw_dcache_line_size x2, x3
+ sub x3, x2, #1
+ bic x4, x10, x3
+2: dc cvau, x4 /* clean D line / unified line */
+ add x4, x4, x2
+ cmp x4, x1
+ b.lo 2b
+
+ ldr x19, [x19, #HIBERN_PBE_NEXT]
+ cbnz x19, 1b
+ dsb ish /* wait for PoU cleaning to finish */
+
+ /* switch to the restored kernels page tables */
+ break_before_make_ttbr_switch x25, x21, x6
+
+ ic ialluis
+ dsb ish
+ isb
+
+ cbz x24, 3f /* Do we need to re-initialise EL2? */
+ hvc #0
+3: ret
+
+ .ltorg
+ENDPROC(swsusp_arch_suspend_exit)
+
+/*
+ * Restore the hyp stub.
+ * This must be done before the hibernate page is unmapped by _cpu_resume(),
+ * but happens before any of the hyp-stub's code is cleaned to PoC.
+ *
+ * x24: The physical address of __hyp_stub_vectors
+ */
+el1_sync:
+ msr vbar_el2, x24
+ eret
+ENDPROC(el1_sync)
+
+.macro invalid_vector label
+\label:
+ b \label
+ENDPROC(\label)
+.endm
+
+ invalid_vector el2_sync_invalid
+ invalid_vector el2_irq_invalid
+ invalid_vector el2_fiq_invalid
+ invalid_vector el2_error_invalid
+ invalid_vector el1_sync_invalid
+ invalid_vector el1_irq_invalid
+ invalid_vector el1_fiq_invalid
+ invalid_vector el1_error_invalid
+
+/* el2 vectors - switch el2 here while we restore the memory image. */
+ .align 11
+ENTRY(hibernate_el2_vectors)
+ ventry el2_sync_invalid // Synchronous EL2t
+ ventry el2_irq_invalid // IRQ EL2t
+ ventry el2_fiq_invalid // FIQ EL2t
+ ventry el2_error_invalid // Error EL2t
+
+ ventry el2_sync_invalid // Synchronous EL2h
+ ventry el2_irq_invalid // IRQ EL2h
+ ventry el2_fiq_invalid // FIQ EL2h
+ ventry el2_error_invalid // Error EL2h
+
+ ventry el1_sync // Synchronous 64-bit EL1
+ ventry el1_irq_invalid // IRQ 64-bit EL1
+ ventry el1_fiq_invalid // FIQ 64-bit EL1
+ ventry el1_error_invalid // Error 64-bit EL1
+
+ ventry el1_sync_invalid // Synchronous 32-bit EL1
+ ventry el1_irq_invalid // IRQ 32-bit EL1
+ ventry el1_fiq_invalid // FIQ 32-bit EL1
+ ventry el1_error_invalid // Error 32-bit EL1
+END(hibernate_el2_vectors)
+
+.popsection