v4.19.13 snapshot.
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
new file mode 100644
index 0000000..ee2ce49
--- /dev/null
+++ b/arch/arm/mm/proc-sa110.S
@@ -0,0 +1,225 @@
+/*
+ * linux/arch/arm/mm/proc-sa110.S
+ *
+ * Copyright (C) 1997-2002 Russell King
+ * hacked for non-paged-MM by Hyok S. Choi, 2003.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * MMU functions for SA110
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the StrongARM-110.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/hwcap.h>
+#include <mach/hardware.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/ptrace.h>
+
+#include "proc-macros.S"
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define DCACHELINESIZE 32
+
+ .text
+
+/*
+ * cpu_sa110_proc_init()
+ */
+ENTRY(cpu_sa110_proc_init)
+ mov r0, #0
+ mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching
+ ret lr
+
+/*
+ * cpu_sa110_proc_fin()
+ */
+ENTRY(cpu_sa110_proc_fin)
+ mov r0, #0
+ mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ret lr
+
+/*
+ * cpu_sa110_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ .pushsection .idmap.text, "ax"
+ENTRY(cpu_sa110_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ ret r0
+ENDPROC(cpu_sa110_reset)
+ .popsection
+
+/*
+ * cpu_sa110_do_idle(type)
+ *
+ * Cause the processor to idle
+ *
+ * type: call type:
+ * 0 = slow idle
+ * 1 = fast idle
+ * 2 = switch to slow processor clock
+ * 3 = switch to fast processor clock
+ */
+ .align 5
+
+ENTRY(cpu_sa110_do_idle)
+ mcr p15, 0, ip, c15, c2, 2 @ disable clock switching
+ ldr r1, =UNCACHEABLE_ADDR @ load from uncacheable loc
+ ldr r1, [r1, #0] @ force switch to MCLK
+ mov r0, r0 @ safety
+ mov r0, r0 @ safety
+ mov r0, r0 @ safety
+ mcr p15, 0, r0, c15, c8, 2 @ Wait for interrupt, cache aligned
+ mov r0, r0 @ safety
+ mov r0, r0 @ safety
+ mov r0, r0 @ safety
+ mcr p15, 0, r0, c15, c1, 2 @ enable clock switching
+ ret lr
+
+/* ================================= CACHE ================================ */
+
+/*
+ * cpu_sa110_dcache_clean_area(addr,sz)
+ *
+ * Clean the specified entry of any caches such that the MMU
+ * translation fetches will obtain correct data.
+ *
+ * addr: cache-unaligned virtual address
+ */
+ .align 5
+ENTRY(cpu_sa110_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #DCACHELINESIZE
+ subs r1, r1, #DCACHELINESIZE
+ bhi 1b
+ ret lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_sa110_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_sa110_switch_mm)
+#ifdef CONFIG_MMU
+ str lr, [sp, #-4]!
+ bl v4wb_flush_kern_cache_all @ clears IP
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ ldr pc, [sp], #4
+#else
+ ret lr
+#endif
+
+/*
+ * cpu_sa110_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_sa110_set_pte_ext)
+#ifdef CONFIG_MMU
+ armv3_set_pte_ext wc_disable=0
+ mov r0, r0
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif
+ ret lr
+
+ .type __sa110_setup, #function
+__sa110_setup:
+ mov r10, #0
+ mcr p15, 0, r10, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r10, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
+ mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4
+#endif
+
+ adr r5, sa110_crval
+ ldmia r5, {r5, r6}
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ bic r0, r0, r5
+ orr r0, r0, r6
+ ret lr
+ .size __sa110_setup, . - __sa110_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * ..01 0001 ..11 1101
+ *
+ */
+ .type sa110_crval, #object
+sa110_crval:
+ crval clear=0x00003f3f, mmuset=0x0000113d, ucset=0x00001130
+
+ __INITDATA
+
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions sa110, dabort=v4_early_abort, pabort=legacy_pabort
+
+ .section ".rodata"
+
+ string cpu_arch_name, "armv4"
+ string cpu_elf_name, "v4"
+ string cpu_sa110_name, "StrongARM-110"
+
+ .align
+
+ .section ".proc.info.init", #alloc
+
+ .type __sa110_proc_info,#object
+__sa110_proc_info:
+ .long 0x4401a100
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ initfn __sa110_setup, __sa110_proc_info
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
+ .long cpu_sa110_name
+ .long sa110_processor_functions
+ .long v4wb_tlb_fns
+ .long v4wb_user_fns
+ .long v4wb_cache_fns
+ .size __sa110_proc_info, . - __sa110_proc_info