v4.19.13 snapshot.
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
new file mode 100644
index 0000000..81d0efb
--- /dev/null
+++ b/arch/arm/mm/proc-macros.S
@@ -0,0 +1,377 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * We need constants.h for:
+ * VMA_VM_MM
+ * VMA_VM_FLAGS
+ * VM_EXEC
+ */
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+#ifdef CONFIG_CPU_V7M
+#include <asm/v7m.h>
+#endif
+
+/*
+ * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
+ */
+ .macro vma_vm_mm, rd, rn
+ ldr \rd, [\rn, #VMA_VM_MM]
+ .endm
+
+/*
+ * vma_vm_flags - get vma->vm_flags
+ */
+ .macro vma_vm_flags, rd, rn
+ ldr \rd, [\rn, #VMA_VM_FLAGS]
+ .endm
+
+/*
+ * act_mm - get current->active_mm
+ */
+ .macro act_mm, rd
+ bic \rd, sp, #8128
+ bic \rd, \rd, #63
+ ldr \rd, [\rd, #TI_TASK]
+ .if (TSK_ACTIVE_MM > IMM12_MASK)
+ add \rd, \rd, #TSK_ACTIVE_MM & ~IMM12_MASK
+ .endif
+ ldr \rd, [\rd, #TSK_ACTIVE_MM & IMM12_MASK]
+ .endm
+
+/*
+ * mmid - get context id from mm pointer (mm->context.id)
+ * note, this field is 64bit, so in big-endian the two words are swapped too.
+ */
+ .macro mmid, rd, rn
+#ifdef __ARMEB__
+ ldr \rd, [\rn, #MM_CONTEXT_ID + 4 ]
+#else
+ ldr \rd, [\rn, #MM_CONTEXT_ID]
+#endif
+ .endm
+
+/*
+ * mask_asid - mask the ASID from the context ID
+ */
+ .macro asid, rd, rn
+ and \rd, \rn, #255
+ .endm
+
+ .macro crval, clear, mmuset, ucset
+#ifdef CONFIG_MMU
+ .word \clear
+ .word \mmuset
+#else
+ .word \clear
+ .word \ucset
+#endif
+ .endm
+
+/*
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
+ */
+ .macro dcache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+ movw \tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+ movt \tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+ ldr \tmp, [\tmp]
+#else
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+#endif
+ lsr \tmp, \tmp, #16
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
+ mov \reg, \reg, lsl \tmp @ actual cache line size
+ .endm
+
+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register
+ * on ARMv7.
+ */
+ .macro icache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+ movw \tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+ movt \tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+ ldr \tmp, [\tmp]
+#else
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+#endif
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
+ mov \reg, \reg, lsl \tmp @ actual cache line size
+ .endm
+
+/*
+ * Sanity check the PTE configuration for the code below - which makes
+ * certain assumptions about how these bits are laid out.
+ */
+#ifdef CONFIG_MMU
+#if L_PTE_SHARED != PTE_EXT_SHARED
+#error PTE shared bit mismatch
+#endif
+#if !defined (CONFIG_ARM_LPAE) && \
+ (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
+ L_PTE_PRESENT) > L_PTE_SHARED
+#error Invalid Linux PTE bit settings
+#endif
+#endif /* CONFIG_MMU */
+
+/*
+ * The ARMv6 and ARMv7 set_pte_ext translation function.
+ *
+ * Permission translation:
+ * YUWD APX AP1 AP0 SVC User
+ * 0xxx 0 0 0 no acc no acc
+ * 100x 1 0 1 r/o no acc
+ * 10x0 1 0 1 r/o no acc
+ * 1011 0 0 1 r/w no acc
+ * 110x 1 1 1 r/o r/o
+ * 11x0 1 1 1 r/o r/o
+ * 1111 0 1 1 r/w r/w
+ */
+ .macro armv6_mt_table pfx
+\pfx\()_mt_table:
+ .long 0x00 @ L_PTE_MT_UNCACHED
+ .long PTE_EXT_TEX(1) @ L_PTE_MT_BUFFERABLE
+ .long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH
+ .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK
+ .long PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED
+ .long 0x00 @ unused
+ .long 0x00 @ L_PTE_MT_MINICACHE (not present)
+ .long PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEALLOC
+ .long 0x00 @ unused
+ .long PTE_EXT_TEX(1) @ L_PTE_MT_DEV_WC
+ .long 0x00 @ unused
+ .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_DEV_CACHED
+ .long PTE_EXT_TEX(2) @ L_PTE_MT_DEV_NONSHARED
+ .long 0x00 @ unused
+ .long 0x00 @ unused
+ .long PTE_CACHEABLE | PTE_BUFFERABLE | PTE_EXT_APX @ L_PTE_MT_VECTORS
+ .endm
+
+ .macro armv6_set_pte_ext pfx
+ str r1, [r0], #2048 @ linux version
+
+ bic r3, r1, #0x000003fc
+ bic r3, r3, #PTE_TYPE_MASK
+ orr r3, r3, r2
+ orr r3, r3, #PTE_EXT_AP0 | 2
+
+ adr ip, \pfx\()_mt_table
+ and r2, r1, #L_PTE_MT_MASK
+ ldr r2, [ip, r2]
+
+ eor r1, r1, #L_PTE_DIRTY
+ tst r1, #L_PTE_DIRTY|L_PTE_RDONLY
+ orrne r3, r3, #PTE_EXT_APX
+
+ tst r1, #L_PTE_USER
+ orrne r3, r3, #PTE_EXT_AP1
+ tstne r3, #PTE_EXT_APX
+
+ @ user read-only -> kernel read-only
+ bicne r3, r3, #PTE_EXT_AP0
+
+ tst r1, #L_PTE_XN
+ orrne r3, r3, #PTE_EXT_XN
+
+ eor r3, r3, r2
+
+ tst r1, #L_PTE_YOUNG
+ tstne r1, #L_PTE_PRESENT
+ moveq r3, #0
+ tstne r1, #L_PTE_NONE
+ movne r3, #0
+
+ str r3, [r0]
+ mcr p15, 0, r0, c7, c10, 1 @ flush_pte
+ .endm
+
+
+/*
+ * The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function,
+ * covering most CPUs except Xscale and Xscale 3.
+ *
+ * Permission translation:
+ * YUWD AP SVC User
+ * 0xxx 0x00 no acc no acc
+ * 100x 0x00 r/o no acc
+ * 10x0 0x00 r/o no acc
+ * 1011 0x55 r/w no acc
+ * 110x 0xaa r/w r/o
+ * 11x0 0xaa r/w r/o
+ * 1111 0xff r/w r/w
+ */
+ .macro armv3_set_pte_ext wc_disable=1
+ str r1, [r0], #2048 @ linux version
+
+ eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r3, #L_PTE_USER @ user?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r3, #L_PTE_RDONLY | L_PTE_DIRTY @ write and dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
+ movne r2, #0
+
+ .if \wc_disable
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ tst r2, #PTE_CACHEABLE
+ bicne r2, r2, #PTE_BUFFERABLE
+#endif
+ .endif
+ str r2, [r0] @ hardware version
+ .endm
+
+
+/*
+ * Xscale set_pte_ext translation, split into two halves to cope
+ * with work-arounds. r3 must be preserved by code between these
+ * two macros.
+ *
+ * Permission translation:
+ * YUWD AP SVC User
+ * 0xxx 00 no acc no acc
+ * 100x 00 r/o no acc
+ * 10x0 00 r/o no acc
+ * 1011 01 r/w no acc
+ * 110x 10 r/w r/o
+ * 11x0 10 r/w r/o
+ * 1111 11 r/w r/w
+ */
+ .macro xscale_set_pte_ext_prologue
+ str r1, [r0] @ linux version
+
+ eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits
+ orr r2, r2, #PTE_TYPE_EXT @ extended page
+
+ tst r3, #L_PTE_USER @ user?
+ orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w
+
+ tst r3, #L_PTE_RDONLY | L_PTE_DIRTY @ write and dirty?
+ orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
+ @ combined with user -> user r/w
+ .endm
+
+ .macro xscale_set_pte_ext_epilogue
+ tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
+ movne r2, #0 @ no -> fault
+
+ str r2, [r0, #2048]! @ hardware version
+ mov ip, #0
+ mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
+ mcr p15, 0, ip, c7, c10, 4 @ data write barrier
+ .endm
+
+.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0, bugs=0
+ .type \name\()_processor_functions, #object
+ .align 2
+ENTRY(\name\()_processor_functions)
+ .word \dabort
+ .word \pabort
+ .word cpu_\name\()_proc_init
+ .word \bugs
+ .word cpu_\name\()_proc_fin
+ .word cpu_\name\()_reset
+ .word cpu_\name\()_do_idle
+ .word cpu_\name\()_dcache_clean_area
+ .word cpu_\name\()_switch_mm
+
+ .if \nommu
+ .word 0
+ .else
+ .word cpu_\name\()_set_pte_ext
+ .endif
+
+ .if \suspend
+ .word cpu_\name\()_suspend_size
+#ifdef CONFIG_ARM_CPU_SUSPEND
+ .word cpu_\name\()_do_suspend
+ .word cpu_\name\()_do_resume
+#else
+ .word 0
+ .word 0
+#endif
+ .else
+ .word 0
+ .word 0
+ .word 0
+ .endif
+
+ .size \name\()_processor_functions, . - \name\()_processor_functions
+.endm
+
+.macro define_cache_functions name:req
+ .align 2
+ .type \name\()_cache_fns, #object
+ENTRY(\name\()_cache_fns)
+ .long \name\()_flush_icache_all
+ .long \name\()_flush_kern_cache_all
+ .long \name\()_flush_kern_cache_louis
+ .long \name\()_flush_user_cache_all
+ .long \name\()_flush_user_cache_range
+ .long \name\()_coherent_kern_range
+ .long \name\()_coherent_user_range
+ .long \name\()_flush_kern_dcache_area
+ .long \name\()_dma_map_area
+ .long \name\()_dma_unmap_area
+ .long \name\()_dma_flush_range
+ .size \name\()_cache_fns, . - \name\()_cache_fns
+.endm
+
+.macro define_tlb_functions name:req, flags_up:req, flags_smp
+ .type \name\()_tlb_fns, #object
+ENTRY(\name\()_tlb_fns)
+ .long \name\()_flush_user_tlb_range
+ .long \name\()_flush_kern_tlb_range
+ .ifnb \flags_smp
+ ALT_SMP(.long \flags_smp )
+ ALT_UP(.long \flags_up )
+ .else
+ .long \flags_up
+ .endif
+ .size \name\()_tlb_fns, . - \name\()_tlb_fns
+.endm
+
+.macro globl_equ x, y
+ .globl \x
+ .equ \x, \y
+.endm
+
+.macro initfn, func, base
+ .long \func - \base
+.endm
+
+ /*
+ * Macro to calculate the log2 size for the protection region
+ * registers. This calculates rd = log2(size) - 1. tmp must
+ * not be the same register as rd.
+ */
+.macro pr_sz, rd, size, tmp
+ mov \tmp, \size, lsr #12
+ mov \rd, #11
+1: movs \tmp, \tmp, lsr #1
+ addne \rd, \rd, #1
+ bne 1b
+.endm
+
+ /*
+ * Macro to generate a protection region register value
+ * given a pre-masked address, size, and enable bit.
+ * Corrupts size.
+ */
+.macro pr_val, dest, addr, size, enable
+ pr_sz \dest, \size, \size @ calculate log2(size) - 1
+ orr \dest, \addr, \dest, lsl #1 @ mask in the region size
+ orr \dest, \dest, \enable
+.endm