v4.19.13 snapshot.
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
new file mode 100644
index 0000000..808efbb
--- /dev/null
+++ b/arch/arm/mm/cache-l2x0.c
@@ -0,0 +1,1817 @@
+/*
+ * arch/arm/mm/cache-l2x0.c - L210/L220/L310 cache controller support
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/log2.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/cputype.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "cache-tauros3.h"
+#include "cache-aurora-l2.h"
+
+struct l2c_init_data {
+ const char *type;
+ unsigned way_size_0;
+ unsigned num_lock;
+ void (*of_parse)(const struct device_node *, u32 *, u32 *);
+ void (*enable)(void __iomem *, unsigned);
+ void (*fixup)(void __iomem *, u32, struct outer_cache_fns *);
+ void (*save)(void __iomem *);
+ void (*configure)(void __iomem *);
+ void (*unlock)(void __iomem *, unsigned);
+ struct outer_cache_fns outer_cache;
+};
+
+#define CACHE_LINE_SIZE 32
+
+static void __iomem *l2x0_base;
+static const struct l2c_init_data *l2x0_data;
+static DEFINE_RAW_SPINLOCK(l2x0_lock);
+static u32 l2x0_way_mask; /* Bitmask of active ways */
+static u32 l2x0_size;
+static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
+
+struct l2x0_regs l2x0_saved_regs;
+
+static bool l2x0_bresp_disable;
+static bool l2x0_flz_disable;
+
+/*
+ * Common code for all cache controllers.
+ */
+static inline void l2c_wait_mask(void __iomem *reg, unsigned long mask)
+{
+ /* wait for cache operation by line or way to complete */
+ while (readl_relaxed(reg) & mask)
+ cpu_relax();
+}
+
+/*
+ * By default, we write directly to secure registers. Platforms must
+ * override this if they are running non-secure.
+ */
+static void l2c_write_sec(unsigned long val, void __iomem *base, unsigned reg)
+{
+ if (val == readl_relaxed(base + reg))
+ return;
+ if (outer_cache.write_sec)
+ outer_cache.write_sec(val, reg);
+ else
+ writel_relaxed(val, base + reg);
+}
+
+/*
+ * This should only be called when we have a requirement that the
+ * register be written due to a work-around, as platforms running
+ * in non-secure mode may not be able to access this register.
+ */
+static inline void l2c_set_debug(void __iomem *base, unsigned long val)
+{
+ l2c_write_sec(val, base, L2X0_DEBUG_CTRL);
+}
+
+static void __l2c_op_way(void __iomem *reg)
+{
+ writel_relaxed(l2x0_way_mask, reg);
+ l2c_wait_mask(reg, l2x0_way_mask);
+}
+
+static inline void l2c_unlock(void __iomem *base, unsigned num)
+{
+ unsigned i;
+
+ for (i = 0; i < num; i++) {
+ writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_D_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_I_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ }
+}
+
+static void l2c_configure(void __iomem *base)
+{
+ l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL);
+}
+
+/*
+ * Enable the L2 cache controller. This function must only be
+ * called when the cache controller is known to be disabled.
+ */
+static void l2c_enable(void __iomem *base, unsigned num_lock)
+{
+ unsigned long flags;
+
+ if (outer_cache.configure)
+ outer_cache.configure(&l2x0_saved_regs);
+ else
+ l2x0_data->configure(base);
+
+ l2x0_data->unlock(base, num_lock);
+
+ local_irq_save(flags);
+ __l2c_op_way(base + L2X0_INV_WAY);
+ writel_relaxed(0, base + sync_reg_offset);
+ l2c_wait_mask(base + sync_reg_offset, 1);
+ local_irq_restore(flags);
+
+ l2c_write_sec(L2X0_CTRL_EN, base, L2X0_CTRL);
+}
+
+static void l2c_disable(void)
+{
+ void __iomem *base = l2x0_base;
+
+ l2x0_pmu_suspend();
+
+ outer_cache.flush_all();
+ l2c_write_sec(0, base, L2X0_CTRL);
+ dsb(st);
+}
+
+static void l2c_save(void __iomem *base)
+{
+ l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+}
+
+static void l2c_resume(void)
+{
+ void __iomem *base = l2x0_base;
+
+ /* Do not touch the controller if already enabled. */
+ if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN))
+ l2c_enable(base, l2x0_data->num_lock);
+
+ l2x0_pmu_resume();
+}
+
+/*
+ * L2C-210 specific code.
+ *
+ * The L2C-2x0 PA, set/way and sync operations are atomic, but we must
+ * ensure that no background operation is running. The way operations
+ * are all background tasks.
+ *
+ * While a background operation is in progress, any new operation is
+ * ignored (unspecified whether this causes an error.) Thankfully, not
+ * used on SMP.
+ *
+ * Never has a different sync register other than L2X0_CACHE_SYNC, but
+ * we use sync_reg_offset here so we can share some of this with L2C-310.
+ */
+static void __l2c210_cache_sync(void __iomem *base)
+{
+ writel_relaxed(0, base + sync_reg_offset);
+}
+
+static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start,
+ unsigned long end)
+{
+ while (start < end) {
+ writel_relaxed(start, reg);
+ start += CACHE_LINE_SIZE;
+ }
+}
+
+static void l2c210_inv_range(unsigned long start, unsigned long end)
+{
+ void __iomem *base = l2x0_base;
+
+ if (start & (CACHE_LINE_SIZE - 1)) {
+ start &= ~(CACHE_LINE_SIZE - 1);
+ writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA);
+ start += CACHE_LINE_SIZE;
+ }
+
+ if (end & (CACHE_LINE_SIZE - 1)) {
+ end &= ~(CACHE_LINE_SIZE - 1);
+ writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA);
+ }
+
+ __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end);
+ __l2c210_cache_sync(base);
+}
+
+static void l2c210_clean_range(unsigned long start, unsigned long end)
+{
+ void __iomem *base = l2x0_base;
+
+ start &= ~(CACHE_LINE_SIZE - 1);
+ __l2c210_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end);
+ __l2c210_cache_sync(base);
+}
+
+static void l2c210_flush_range(unsigned long start, unsigned long end)
+{
+ void __iomem *base = l2x0_base;
+
+ start &= ~(CACHE_LINE_SIZE - 1);
+ __l2c210_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end);
+ __l2c210_cache_sync(base);
+}
+
+static void l2c210_flush_all(void)
+{
+ void __iomem *base = l2x0_base;
+
+ BUG_ON(!irqs_disabled());
+
+ __l2c_op_way(base + L2X0_CLEAN_INV_WAY);
+ __l2c210_cache_sync(base);
+}
+
+static void l2c210_sync(void)
+{
+ __l2c210_cache_sync(l2x0_base);
+}
+
+static const struct l2c_init_data l2c210_data __initconst = {
+ .type = "L2C-210",
+ .way_size_0 = SZ_8K,
+ .num_lock = 1,
+ .enable = l2c_enable,
+ .save = l2c_save,
+ .configure = l2c_configure,
+ .unlock = l2c_unlock,
+ .outer_cache = {
+ .inv_range = l2c210_inv_range,
+ .clean_range = l2c210_clean_range,
+ .flush_range = l2c210_flush_range,
+ .flush_all = l2c210_flush_all,
+ .disable = l2c_disable,
+ .sync = l2c210_sync,
+ .resume = l2c_resume,
+ },
+};
+
+/*
+ * L2C-220 specific code.
+ *
+ * All operations are background operations: they have to be waited for.
+ * Conflicting requests generate a slave error (which will cause an
+ * imprecise abort.) Never uses sync_reg_offset, so we hard-code the
+ * sync register here.
+ *
+ * However, we can re-use the l2c210_resume call.
+ */
+static inline void __l2c220_cache_sync(void __iomem *base)
+{
+ writel_relaxed(0, base + L2X0_CACHE_SYNC);
+ l2c_wait_mask(base + L2X0_CACHE_SYNC, 1);
+}
+
+static void l2c220_op_way(void __iomem *base, unsigned reg)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&l2x0_lock, flags);
+ __l2c_op_way(base + reg);
+ __l2c220_cache_sync(base);
+ raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start,
+ unsigned long end, unsigned long flags)
+{
+ raw_spinlock_t *lock = &l2x0_lock;
+
+ while (start < end) {
+ unsigned long blk_end = start + min(end - start, 4096UL);
+
+ while (start < blk_end) {
+ l2c_wait_mask(reg, 1);
+ writel_relaxed(start, reg);
+ start += CACHE_LINE_SIZE;
+ }
+
+ if (blk_end < end) {
+ raw_spin_unlock_irqrestore(lock, flags);
+ raw_spin_lock_irqsave(lock, flags);
+ }
+ }
+
+ return flags;
+}
+
+static void l2c220_inv_range(unsigned long start, unsigned long end)
+{
+ void __iomem *base = l2x0_base;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&l2x0_lock, flags);
+ if ((start | end) & (CACHE_LINE_SIZE - 1)) {
+ if (start & (CACHE_LINE_SIZE - 1)) {
+ start &= ~(CACHE_LINE_SIZE - 1);
+ writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA);
+ start += CACHE_LINE_SIZE;
+ }
+
+ if (end & (CACHE_LINE_SIZE - 1)) {
+ end &= ~(CACHE_LINE_SIZE - 1);
+ l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
+ writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA);
+ }
+ }
+
+ flags = l2c220_op_pa_range(base + L2X0_INV_LINE_PA,
+ start, end, flags);
+ l2c_wait_mask(base + L2X0_INV_LINE_PA, 1);
+ __l2c220_cache_sync(base);
+ raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2c220_clean_range(unsigned long start, unsigned long end)
+{
+ void __iomem *base = l2x0_base;
+ unsigned long flags;
+
+ start &= ~(CACHE_LINE_SIZE - 1);
+ if ((end - start) >= l2x0_size) {
+ l2c220_op_way(base, L2X0_CLEAN_WAY);
+ return;
+ }
+
+ raw_spin_lock_irqsave(&l2x0_lock, flags);
+ flags = l2c220_op_pa_range(base + L2X0_CLEAN_LINE_PA,
+ start, end, flags);
+ l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
+ __l2c220_cache_sync(base);
+ raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2c220_flush_range(unsigned long start, unsigned long end)
+{
+ void __iomem *base = l2x0_base;
+ unsigned long flags;
+
+ start &= ~(CACHE_LINE_SIZE - 1);
+ if ((end - start) >= l2x0_size) {
+ l2c220_op_way(base, L2X0_CLEAN_INV_WAY);
+ return;
+ }
+
+ raw_spin_lock_irqsave(&l2x0_lock, flags);
+ flags = l2c220_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA,
+ start, end, flags);
+ l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
+ __l2c220_cache_sync(base);
+ raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2c220_flush_all(void)
+{
+ l2c220_op_way(l2x0_base, L2X0_CLEAN_INV_WAY);
+}
+
+static void l2c220_sync(void)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&l2x0_lock, flags);
+ __l2c220_cache_sync(l2x0_base);
+ raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2c220_enable(void __iomem *base, unsigned num_lock)
+{
+ /*
+ * Always enable non-secure access to the lockdown registers -
+ * we write to them as part of the L2C enable sequence so they
+ * need to be accessible.
+ */
+ l2x0_saved_regs.aux_ctrl |= L220_AUX_CTRL_NS_LOCKDOWN;
+
+ l2c_enable(base, num_lock);
+}
+
+static void l2c220_unlock(void __iomem *base, unsigned num_lock)
+{
+ if (readl_relaxed(base + L2X0_AUX_CTRL) & L220_AUX_CTRL_NS_LOCKDOWN)
+ l2c_unlock(base, num_lock);
+}
+
+static const struct l2c_init_data l2c220_data = {
+ .type = "L2C-220",
+ .way_size_0 = SZ_8K,
+ .num_lock = 1,
+ .enable = l2c220_enable,
+ .save = l2c_save,
+ .configure = l2c_configure,
+ .unlock = l2c220_unlock,
+ .outer_cache = {
+ .inv_range = l2c220_inv_range,
+ .clean_range = l2c220_clean_range,
+ .flush_range = l2c220_flush_range,
+ .flush_all = l2c220_flush_all,
+ .disable = l2c_disable,
+ .sync = l2c220_sync,
+ .resume = l2c_resume,
+ },
+};
+
+/*
+ * L2C-310 specific code.
+ *
+ * Very similar to L2C-210, the PA, set/way and sync operations are atomic,
+ * and the way operations are all background tasks. However, issuing an
+ * operation while a background operation is in progress results in a
+ * SLVERR response. We can reuse:
+ *
+ * __l2c210_cache_sync (using sync_reg_offset)
+ * l2c210_sync
+ * l2c210_inv_range (if 588369 is not applicable)
+ * l2c210_clean_range
+ * l2c210_flush_range (if 588369 is not applicable)
+ * l2c210_flush_all (if 727915 is not applicable)
+ *
+ * Errata:
+ * 588369: PL310 R0P0->R1P0, fixed R2P0.
+ * Affects: all clean+invalidate operations
+ * clean and invalidate skips the invalidate step, so we need to issue
+ * separate operations. We also require the above debug workaround
+ * enclosing this code fragment on affected parts. On unaffected parts,
+ * we must not use this workaround without the debug register writes
+ * to avoid exposing a problem similar to 727915.
+ *
+ * 727915: PL310 R2P0->R3P0, fixed R3P1.
+ * Affects: clean+invalidate by way
+ * clean and invalidate by way runs in the background, and a store can
+ * hit the line between the clean operation and invalidate operation,
+ * resulting in the store being lost.
+ *
+ * 752271: PL310 R3P0->R3P1-50REL0, fixed R3P2.
+ * Affects: 8x64-bit (double fill) line fetches
+ * double fill line fetches can fail to cause dirty data to be evicted
+ * from the cache before the new data overwrites the second line.
+ *
+ * 753970: PL310 R3P0, fixed R3P1.
+ * Affects: sync
+ * prevents merging writes after the sync operation, until another L2C
+ * operation is performed (or a number of other conditions.)
+ *
+ * 769419: PL310 R0P0->R3P1, fixed R3P2.
+ * Affects: store buffer
+ * store buffer is not automatically drained.
+ */
+static void l2c310_inv_range_erratum(unsigned long start, unsigned long end)
+{
+ void __iomem *base = l2x0_base;
+
+ if ((start | end) & (CACHE_LINE_SIZE - 1)) {
+ unsigned long flags;
+
+ /* Erratum 588369 for both clean+invalidate operations */
+ raw_spin_lock_irqsave(&l2x0_lock, flags);
+ l2c_set_debug(base, 0x03);
+
+ if (start & (CACHE_LINE_SIZE - 1)) {
+ start &= ~(CACHE_LINE_SIZE - 1);
+ writel_relaxed(start, base + L2X0_CLEAN_LINE_PA);
+ writel_relaxed(start, base + L2X0_INV_LINE_PA);
+ start += CACHE_LINE_SIZE;
+ }
+
+ if (end & (CACHE_LINE_SIZE - 1)) {
+ end &= ~(CACHE_LINE_SIZE - 1);
+ writel_relaxed(end, base + L2X0_CLEAN_LINE_PA);
+ writel_relaxed(end, base + L2X0_INV_LINE_PA);
+ }
+
+ l2c_set_debug(base, 0x00);
+ raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+ }
+
+ __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end);
+ __l2c210_cache_sync(base);
+}
+
+static void l2c310_flush_range_erratum(unsigned long start, unsigned long end)
+{
+ raw_spinlock_t *lock = &l2x0_lock;
+ unsigned long flags;
+ void __iomem *base = l2x0_base;
+
+ raw_spin_lock_irqsave(lock, flags);
+ while (start < end) {
+ unsigned long blk_end = start + min(end - start, 4096UL);
+
+ l2c_set_debug(base, 0x03);
+ while (start < blk_end) {
+ writel_relaxed(start, base + L2X0_CLEAN_LINE_PA);
+ writel_relaxed(start, base + L2X0_INV_LINE_PA);
+ start += CACHE_LINE_SIZE;
+ }
+ l2c_set_debug(base, 0x00);
+
+ if (blk_end < end) {
+ raw_spin_unlock_irqrestore(lock, flags);
+ raw_spin_lock_irqsave(lock, flags);
+ }
+ }
+ raw_spin_unlock_irqrestore(lock, flags);
+ __l2c210_cache_sync(base);
+}
+
+static void l2c310_flush_all_erratum(void)
+{
+ void __iomem *base = l2x0_base;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&l2x0_lock, flags);
+ l2c_set_debug(base, 0x03);
+ __l2c_op_way(base + L2X0_CLEAN_INV_WAY);
+ l2c_set_debug(base, 0x00);
+ __l2c210_cache_sync(base);
+ raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void __init l2c310_save(void __iomem *base)
+{
+ unsigned revision;
+
+ l2c_save(base);
+
+ l2x0_saved_regs.tag_latency = readl_relaxed(base +
+ L310_TAG_LATENCY_CTRL);
+ l2x0_saved_regs.data_latency = readl_relaxed(base +
+ L310_DATA_LATENCY_CTRL);
+ l2x0_saved_regs.filter_end = readl_relaxed(base +
+ L310_ADDR_FILTER_END);
+ l2x0_saved_regs.filter_start = readl_relaxed(base +
+ L310_ADDR_FILTER_START);
+
+ revision = readl_relaxed(base + L2X0_CACHE_ID) &
+ L2X0_CACHE_ID_RTL_MASK;
+
+ /* From r2p0, there is Prefetch offset/control register */
+ if (revision >= L310_CACHE_ID_RTL_R2P0)
+ l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base +
+ L310_PREFETCH_CTRL);
+
+ /* From r3p0, there is Power control register */
+ if (revision >= L310_CACHE_ID_RTL_R3P0)
+ l2x0_saved_regs.pwr_ctrl = readl_relaxed(base +
+ L310_POWER_CTRL);
+}
+
+static void l2c310_configure(void __iomem *base)
+{
+ unsigned revision;
+
+ l2c_configure(base);
+
+ /* restore pl310 setup */
+ l2c_write_sec(l2x0_saved_regs.tag_latency, base,
+ L310_TAG_LATENCY_CTRL);
+ l2c_write_sec(l2x0_saved_regs.data_latency, base,
+ L310_DATA_LATENCY_CTRL);
+ l2c_write_sec(l2x0_saved_regs.filter_end, base,
+ L310_ADDR_FILTER_END);
+ l2c_write_sec(l2x0_saved_regs.filter_start, base,
+ L310_ADDR_FILTER_START);
+
+ revision = readl_relaxed(base + L2X0_CACHE_ID) &
+ L2X0_CACHE_ID_RTL_MASK;
+
+ if (revision >= L310_CACHE_ID_RTL_R2P0)
+ l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base,
+ L310_PREFETCH_CTRL);
+ if (revision >= L310_CACHE_ID_RTL_R3P0)
+ l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base,
+ L310_POWER_CTRL);
+}
+
+static int l2c310_starting_cpu(unsigned int cpu)
+{
+ set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
+ return 0;
+}
+
+static int l2c310_dying_cpu(unsigned int cpu)
+{
+ set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));
+ return 0;
+}
+
+static void __init l2c310_enable(void __iomem *base, unsigned num_lock)
+{
+ unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
+ bool cortex_a9 = read_cpuid_part() == ARM_CPU_PART_CORTEX_A9;
+ u32 aux = l2x0_saved_regs.aux_ctrl;
+
+ if (rev >= L310_CACHE_ID_RTL_R2P0) {
+ if (cortex_a9 && !l2x0_bresp_disable) {
+ aux |= L310_AUX_CTRL_EARLY_BRESP;
+ pr_info("L2C-310 enabling early BRESP for Cortex-A9\n");
+ } else if (aux & L310_AUX_CTRL_EARLY_BRESP) {
+ pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n");
+ aux &= ~L310_AUX_CTRL_EARLY_BRESP;
+ }
+ }
+
+ if (cortex_a9 && !l2x0_flz_disable) {
+ u32 aux_cur = readl_relaxed(base + L2X0_AUX_CTRL);
+ u32 acr = get_auxcr();
+
+ pr_debug("Cortex-A9 ACR=0x%08x\n", acr);
+
+ if (acr & BIT(3) && !(aux_cur & L310_AUX_CTRL_FULL_LINE_ZERO))
+ pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n");
+
+ if (aux & L310_AUX_CTRL_FULL_LINE_ZERO && !(acr & BIT(3)))
+ pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n");
+
+ if (!(aux & L310_AUX_CTRL_FULL_LINE_ZERO) && !outer_cache.write_sec) {
+ aux |= L310_AUX_CTRL_FULL_LINE_ZERO;
+ pr_info("L2C-310 full line of zeros enabled for Cortex-A9\n");
+ }
+ } else if (aux & (L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP)) {
+ pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n");
+ aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP);
+ }
+
+ /*
+ * Always enable non-secure access to the lockdown registers -
+ * we write to them as part of the L2C enable sequence so they
+ * need to be accessible.
+ */
+ l2x0_saved_regs.aux_ctrl = aux | L310_AUX_CTRL_NS_LOCKDOWN;
+
+ l2c_enable(base, num_lock);
+
+ /* Read back resulting AUX_CTRL value as it could have been altered. */
+ aux = readl_relaxed(base + L2X0_AUX_CTRL);
+
+ if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) {
+ u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL);
+
+ pr_info("L2C-310 %s%s prefetch enabled, offset %u lines\n",
+ aux & L310_AUX_CTRL_INSTR_PREFETCH ? "I" : "",
+ aux & L310_AUX_CTRL_DATA_PREFETCH ? "D" : "",
+ 1 + (prefetch & L310_PREFETCH_CTRL_OFFSET_MASK));
+ }
+
+ /* r3p0 or later has power control register */
+ if (rev >= L310_CACHE_ID_RTL_R3P0) {
+ u32 power_ctrl;
+
+ power_ctrl = readl_relaxed(base + L310_POWER_CTRL);
+ pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n",
+ power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis",
+ power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis");
+ }
+
+ if (aux & L310_AUX_CTRL_FULL_LINE_ZERO)
+ cpuhp_setup_state(CPUHP_AP_ARM_L2X0_STARTING,
+ "arm/l2x0:starting", l2c310_starting_cpu,
+ l2c310_dying_cpu);
+}
+
+static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
+ struct outer_cache_fns *fns)
+{
+ unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK;
+ const char *errata[8];
+ unsigned n = 0;
+
+ if (IS_ENABLED(CONFIG_PL310_ERRATA_588369) &&
+ revision < L310_CACHE_ID_RTL_R2P0 &&
+ /* For bcm compatibility */
+ fns->inv_range == l2c210_inv_range) {
+ fns->inv_range = l2c310_inv_range_erratum;
+ fns->flush_range = l2c310_flush_range_erratum;
+ errata[n++] = "588369";
+ }
+
+ if (IS_ENABLED(CONFIG_PL310_ERRATA_727915) &&
+ revision >= L310_CACHE_ID_RTL_R2P0 &&
+ revision < L310_CACHE_ID_RTL_R3P1) {
+ fns->flush_all = l2c310_flush_all_erratum;
+ errata[n++] = "727915";
+ }
+
+ if (revision >= L310_CACHE_ID_RTL_R3P0 &&
+ revision < L310_CACHE_ID_RTL_R3P2) {
+ u32 val = l2x0_saved_regs.prefetch_ctrl;
+ if (val & L310_PREFETCH_CTRL_DBL_LINEFILL) {
+ val &= ~L310_PREFETCH_CTRL_DBL_LINEFILL;
+ l2x0_saved_regs.prefetch_ctrl = val;
+ errata[n++] = "752271";
+ }
+ }
+
+ if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) &&
+ revision == L310_CACHE_ID_RTL_R3P0) {
+ sync_reg_offset = L2X0_DUMMY_REG;
+ errata[n++] = "753970";
+ }
+
+ if (IS_ENABLED(CONFIG_PL310_ERRATA_769419))
+ errata[n++] = "769419";
+
+ if (n) {
+ unsigned i;
+
+ pr_info("L2C-310 errat%s", n > 1 ? "a" : "um");
+ for (i = 0; i < n; i++)
+ pr_cont(" %s", errata[i]);
+ pr_cont(" enabled\n");
+ }
+}
+
+static void l2c310_disable(void)
+{
+ /*
+ * If full-line-of-zeros is enabled, we must first disable it in the
+ * Cortex-A9 auxiliary control register before disabling the L2 cache.
+ */
+ if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO)
+ set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));
+
+ l2c_disable();
+}
+
+static void l2c310_resume(void)
+{
+ l2c_resume();
+
+ /* Re-enable full-line-of-zeros for Cortex-A9 */
+ if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO)
+ set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
+}
+
+static void l2c310_unlock(void __iomem *base, unsigned num_lock)
+{
+ if (readl_relaxed(base + L2X0_AUX_CTRL) & L310_AUX_CTRL_NS_LOCKDOWN)
+ l2c_unlock(base, num_lock);
+}
+
+static const struct l2c_init_data l2c310_init_fns __initconst = {
+ .type = "L2C-310",
+ .way_size_0 = SZ_8K,
+ .num_lock = 8,
+ .enable = l2c310_enable,
+ .fixup = l2c310_fixup,
+ .save = l2c310_save,
+ .configure = l2c310_configure,
+ .unlock = l2c310_unlock,
+ .outer_cache = {
+ .inv_range = l2c210_inv_range,
+ .clean_range = l2c210_clean_range,
+ .flush_range = l2c210_flush_range,
+ .flush_all = l2c210_flush_all,
+ .disable = l2c310_disable,
+ .sync = l2c210_sync,
+ .resume = l2c310_resume,
+ },
+};
+
+static int __init __l2c_init(const struct l2c_init_data *data,
+ u32 aux_val, u32 aux_mask, u32 cache_id, bool nosync)
+{
+ struct outer_cache_fns fns;
+ unsigned way_size_bits, ways;
+ u32 aux, old_aux;
+
+ /*
+ * Save the pointer globally so that callbacks which do not receive
+ * context from callers can access the structure.
+ */
+ l2x0_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
+ if (!l2x0_data)
+ return -ENOMEM;
+
+ /*
+ * Sanity check the aux values. aux_mask is the bits we preserve
+ * from reading the hardware register, and aux_val is the bits we
+ * set.
+ */
+ if (aux_val & aux_mask)
+ pr_alert("L2C: platform provided aux values permit register corruption.\n");
+
+ old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+ aux &= aux_mask;
+ aux |= aux_val;
+
+ if (old_aux != aux)
+ pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n",
+ old_aux, aux);
+
+ /* Determine the number of ways */
+ switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
+ case L2X0_CACHE_ID_PART_L310:
+ if ((aux_val | ~aux_mask) & (L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_ASSOCIATIVITY_16))
+ pr_warn("L2C: DT/platform tries to modify or specify cache size\n");
+ if (aux & (1 << 16))
+ ways = 16;
+ else
+ ways = 8;
+ break;
+
+ case L2X0_CACHE_ID_PART_L210:
+ case L2X0_CACHE_ID_PART_L220:
+ ways = (aux >> 13) & 0xf;
+ break;
+
+ case AURORA_CACHE_ID:
+ ways = (aux >> 13) & 0xf;
+ ways = 2 << ((ways + 1) >> 2);
+ break;
+
+ default:
+ /* Assume unknown chips have 8 ways */
+ ways = 8;
+ break;
+ }
+
+ l2x0_way_mask = (1 << ways) - 1;
+
+ /*
+ * way_size_0 is the size that a way_size value of zero would be
+ * given the calculation: way_size = way_size_0 << way_size_bits.
+ * So, if way_size_bits=0 is reserved, but way_size_bits=1 is 16k,
+ * then way_size_0 would be 8k.
+ *
+ * L2 cache size = number of ways * way size.
+ */
+ way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >>
+ L2C_AUX_CTRL_WAY_SIZE_SHIFT;
+ l2x0_size = ways * (data->way_size_0 << way_size_bits);
+
+ fns = data->outer_cache;
+ fns.write_sec = outer_cache.write_sec;
+ fns.configure = outer_cache.configure;
+ if (data->fixup)
+ data->fixup(l2x0_base, cache_id, &fns);
+ if (nosync) {
+ pr_info("L2C: disabling outer sync\n");
+ fns.sync = NULL;
+ }
+
+ /*
+ * Check if l2x0 controller is already enabled. If we are booting
+ * in non-secure mode accessing the below registers will fault.
+ */
+ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
+ l2x0_saved_regs.aux_ctrl = aux;
+
+ data->enable(l2x0_base, data->num_lock);
+ }
+
+ outer_cache = fns;
+
+ /*
+ * It is strange to save the register state before initialisation,
+ * but hey, this is what the DT implementations decided to do.
+ */
+ if (data->save)
+ data->save(l2x0_base);
+
+ /* Re-read it in case some bits are reserved. */
+ aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+
+ pr_info("%s cache controller enabled, %d ways, %d kB\n",
+ data->type, ways, l2x0_size >> 10);
+ pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
+ data->type, cache_id, aux);
+
+ l2x0_pmu_register(l2x0_base, cache_id);
+
+ return 0;
+}
+
+void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
+{
+ const struct l2c_init_data *data;
+ u32 cache_id;
+
+ l2x0_base = base;
+
+ cache_id = readl_relaxed(base + L2X0_CACHE_ID);
+
+ switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
+ default:
+ case L2X0_CACHE_ID_PART_L210:
+ data = &l2c210_data;
+ break;
+
+ case L2X0_CACHE_ID_PART_L220:
+ data = &l2c220_data;
+ break;
+
+ case L2X0_CACHE_ID_PART_L310:
+ data = &l2c310_init_fns;
+ break;
+ }
+
+ /* Read back current (default) hardware configuration */
+ if (data->save)
+ data->save(l2x0_base);
+
+ __l2c_init(data, aux_val, aux_mask, cache_id, false);
+}
+
+#ifdef CONFIG_OF
+static int l2_wt_override;
+
+/* Aurora don't have the cache ID register available, so we have to
+ * pass it though the device tree */
+static u32 cache_id_part_number_from_dt;
+
+/**
+ * l2x0_cache_size_of_parse() - read cache size parameters from DT
+ * @np: the device tree node for the l2 cache
+ * @aux_val: pointer to machine-supplied auxilary register value, to
+ * be augmented by the call (bits to be set to 1)
+ * @aux_mask: pointer to machine-supplied auxilary register mask, to
+ * be augmented by the call (bits to be set to 0)
+ * @associativity: variable to return the calculated associativity in
+ * @max_way_size: the maximum size in bytes for the cache ways
+ */
+static int __init l2x0_cache_size_of_parse(const struct device_node *np,
+ u32 *aux_val, u32 *aux_mask,
+ u32 *associativity,
+ u32 max_way_size)
+{
+ u32 mask = 0, val = 0;
+ u32 cache_size = 0, sets = 0;
+ u32 way_size_bits = 1;
+ u32 way_size = 0;
+ u32 block_size = 0;
+ u32 line_size = 0;
+
+ of_property_read_u32(np, "cache-size", &cache_size);
+ of_property_read_u32(np, "cache-sets", &sets);
+ of_property_read_u32(np, "cache-block-size", &block_size);
+ of_property_read_u32(np, "cache-line-size", &line_size);
+
+ if (!cache_size || !sets)
+ return -ENODEV;
+
+ /* All these l2 caches have the same line = block size actually */
+ if (!line_size) {
+ if (block_size) {
+ /* If linesize is not given, it is equal to blocksize */
+ line_size = block_size;
+ } else {
+ /* Fall back to known size */
+ pr_warn("L2C OF: no cache block/line size given: "
+ "falling back to default size %d bytes\n",
+ CACHE_LINE_SIZE);
+ line_size = CACHE_LINE_SIZE;
+ }
+ }
+
+ if (line_size != CACHE_LINE_SIZE)
+ pr_warn("L2C OF: DT supplied line size %d bytes does "
+ "not match hardware line size of %d bytes\n",
+ line_size,
+ CACHE_LINE_SIZE);
+
+ /*
+ * Since:
+ * set size = cache size / sets
+ * ways = cache size / (sets * line size)
+ * way size = cache size / (cache size / (sets * line size))
+ * way size = sets * line size
+ * associativity = ways = cache size / way size
+ */
+ way_size = sets * line_size;
+ *associativity = cache_size / way_size;
+
+ if (way_size > max_way_size) {
+ pr_err("L2C OF: set size %dKB is too large\n", way_size);
+ return -EINVAL;
+ }
+
+ pr_info("L2C OF: override cache size: %d bytes (%dKB)\n",
+ cache_size, cache_size >> 10);
+ pr_info("L2C OF: override line size: %d bytes\n", line_size);
+ pr_info("L2C OF: override way size: %d bytes (%dKB)\n",
+ way_size, way_size >> 10);
+ pr_info("L2C OF: override associativity: %d\n", *associativity);
+
+ /*
+ * Calculates the bits 17:19 to set for way size:
+ * 512KB -> 6, 256KB -> 5, ... 16KB -> 1
+ */
+ way_size_bits = ilog2(way_size >> 10) - 3;
+ if (way_size_bits < 1 || way_size_bits > 6) {
+ pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n",
+ way_size);
+ return -EINVAL;
+ }
+
+ mask |= L2C_AUX_CTRL_WAY_SIZE_MASK;
+ val |= (way_size_bits << L2C_AUX_CTRL_WAY_SIZE_SHIFT);
+
+ *aux_val &= ~mask;
+ *aux_val |= val;
+ *aux_mask &= ~mask;
+
+ return 0;
+}
+
+static void __init l2x0_of_parse(const struct device_node *np,
+ u32 *aux_val, u32 *aux_mask)
+{
+ u32 data[2] = { 0, 0 };
+ u32 tag = 0;
+ u32 dirty = 0;
+ u32 val = 0, mask = 0;
+ u32 assoc;
+ int ret;
+
+ of_property_read_u32(np, "arm,tag-latency", &tag);
+ if (tag) {
+ mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
+ val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
+ }
+
+ of_property_read_u32_array(np, "arm,data-latency",
+ data, ARRAY_SIZE(data));
+ if (data[0] && data[1]) {
+ mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
+ L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
+ val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
+ ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
+ }
+
+ of_property_read_u32(np, "arm,dirty-latency", &dirty);
+ if (dirty) {
+ mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
+ val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
+ }
+
+ if (of_property_read_bool(np, "arm,parity-enable")) {
+ mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+ val |= L2C_AUX_CTRL_PARITY_ENABLE;
+ } else if (of_property_read_bool(np, "arm,parity-disable")) {
+ mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+ }
+
+ if (of_property_read_bool(np, "arm,shared-override")) {
+ mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
+ val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
+ }
+
+ ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
+ if (ret)
+ return;
+
+ if (assoc > 8) {
+ pr_err("l2x0 of: cache setting yield too high associativity\n");
+ pr_err("l2x0 of: %d calculated, max 8\n", assoc);
+ } else {
+ mask |= L2X0_AUX_CTRL_ASSOC_MASK;
+ val |= (assoc << L2X0_AUX_CTRL_ASSOC_SHIFT);
+ }
+
+ *aux_val &= ~mask;
+ *aux_val |= val;
+ *aux_mask &= ~mask;
+}
+
+static const struct l2c_init_data of_l2c210_data __initconst = {
+ .type = "L2C-210",
+ .way_size_0 = SZ_8K,
+ .num_lock = 1,
+ .of_parse = l2x0_of_parse,
+ .enable = l2c_enable,
+ .save = l2c_save,
+ .configure = l2c_configure,
+ .unlock = l2c_unlock,
+ .outer_cache = {
+ .inv_range = l2c210_inv_range,
+ .clean_range = l2c210_clean_range,
+ .flush_range = l2c210_flush_range,
+ .flush_all = l2c210_flush_all,
+ .disable = l2c_disable,
+ .sync = l2c210_sync,
+ .resume = l2c_resume,
+ },
+};
+
+static const struct l2c_init_data of_l2c220_data __initconst = {
+ .type = "L2C-220",
+ .way_size_0 = SZ_8K,
+ .num_lock = 1,
+ .of_parse = l2x0_of_parse,
+ .enable = l2c220_enable,
+ .save = l2c_save,
+ .configure = l2c_configure,
+ .unlock = l2c220_unlock,
+ .outer_cache = {
+ .inv_range = l2c220_inv_range,
+ .clean_range = l2c220_clean_range,
+ .flush_range = l2c220_flush_range,
+ .flush_all = l2c220_flush_all,
+ .disable = l2c_disable,
+ .sync = l2c220_sync,
+ .resume = l2c_resume,
+ },
+};
+
+static void __init l2c310_of_parse(const struct device_node *np,
+ u32 *aux_val, u32 *aux_mask)
+{
+ u32 data[3] = { 0, 0, 0 };
+ u32 tag[3] = { 0, 0, 0 };
+ u32 filter[2] = { 0, 0 };
+ u32 assoc;
+ u32 prefetch;
+ u32 power;
+ u32 val;
+ int ret;
+
+ of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
+ if (tag[0] && tag[1] && tag[2])
+ l2x0_saved_regs.tag_latency =
+ L310_LATENCY_CTRL_RD(tag[0] - 1) |
+ L310_LATENCY_CTRL_WR(tag[1] - 1) |
+ L310_LATENCY_CTRL_SETUP(tag[2] - 1);
+
+ of_property_read_u32_array(np, "arm,data-latency",
+ data, ARRAY_SIZE(data));
+ if (data[0] && data[1] && data[2])
+ l2x0_saved_regs.data_latency =
+ L310_LATENCY_CTRL_RD(data[0] - 1) |
+ L310_LATENCY_CTRL_WR(data[1] - 1) |
+ L310_LATENCY_CTRL_SETUP(data[2] - 1);
+
+ of_property_read_u32_array(np, "arm,filter-ranges",
+ filter, ARRAY_SIZE(filter));
+ if (filter[1]) {
+ l2x0_saved_regs.filter_end =
+ ALIGN(filter[0] + filter[1], SZ_1M);
+ l2x0_saved_regs.filter_start = (filter[0] & ~(SZ_1M - 1))
+ | L310_ADDR_FILTER_EN;
+ }
+
+ ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K);
+ if (!ret) {
+ switch (assoc) {
+ case 16:
+ *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK;
+ *aux_val |= L310_AUX_CTRL_ASSOCIATIVITY_16;
+ *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK;
+ break;
+ case 8:
+ *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK;
+ *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK;
+ break;
+ default:
+ pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n",
+ assoc);
+ break;
+ }
+ }
+
+ if (of_property_read_bool(np, "arm,shared-override")) {
+ *aux_val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
+ *aux_mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
+ }
+
+ if (of_property_read_bool(np, "arm,parity-enable")) {
+ *aux_val |= L2C_AUX_CTRL_PARITY_ENABLE;
+ *aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+ } else if (of_property_read_bool(np, "arm,parity-disable")) {
+ *aux_val &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+ *aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+ }
+
+ if (of_property_read_bool(np, "arm,early-bresp-disable"))
+ l2x0_bresp_disable = true;
+
+ if (of_property_read_bool(np, "arm,full-line-zero-disable"))
+ l2x0_flz_disable = true;
+
+ prefetch = l2x0_saved_regs.prefetch_ctrl;
+
+ ret = of_property_read_u32(np, "arm,double-linefill", &val);
+ if (ret == 0) {
+ if (val)
+ prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL;
+ else
+ prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL;
+ } else if (ret != -EINVAL) {
+ pr_err("L2C-310 OF arm,double-linefill property value is missing\n");
+ }
+
+ ret = of_property_read_u32(np, "arm,double-linefill-incr", &val);
+ if (ret == 0) {
+ if (val)
+ prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_INCR;
+ else
+ prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_INCR;
+ } else if (ret != -EINVAL) {
+ pr_err("L2C-310 OF arm,double-linefill-incr property value is missing\n");
+ }
+
+ ret = of_property_read_u32(np, "arm,double-linefill-wrap", &val);
+ if (ret == 0) {
+ if (!val)
+ prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP;
+ else
+ prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP;
+ } else if (ret != -EINVAL) {
+ pr_err("L2C-310 OF arm,double-linefill-wrap property value is missing\n");
+ }
+
+ ret = of_property_read_u32(np, "arm,prefetch-drop", &val);
+ if (ret == 0) {
+ if (val)
+ prefetch |= L310_PREFETCH_CTRL_PREFETCH_DROP;
+ else
+ prefetch &= ~L310_PREFETCH_CTRL_PREFETCH_DROP;
+ } else if (ret != -EINVAL) {
+ pr_err("L2C-310 OF arm,prefetch-drop property value is missing\n");
+ }
+
+ ret = of_property_read_u32(np, "arm,prefetch-offset", &val);
+ if (ret == 0) {
+ prefetch &= ~L310_PREFETCH_CTRL_OFFSET_MASK;
+ prefetch |= val & L310_PREFETCH_CTRL_OFFSET_MASK;
+ } else if (ret != -EINVAL) {
+ pr_err("L2C-310 OF arm,prefetch-offset property value is missing\n");
+ }
+
+ ret = of_property_read_u32(np, "prefetch-data", &val);
+ if (ret == 0) {
+ if (val)
+ prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
+ else
+ prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+ } else if (ret != -EINVAL) {
+ pr_err("L2C-310 OF prefetch-data property value is missing\n");
+ }
+
+ ret = of_property_read_u32(np, "prefetch-instr", &val);
+ if (ret == 0) {
+ if (val)
+ prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
+ else
+ prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+ } else if (ret != -EINVAL) {
+ pr_err("L2C-310 OF prefetch-instr property value is missing\n");
+ }
+
+ l2x0_saved_regs.prefetch_ctrl = prefetch;
+
+ power = l2x0_saved_regs.pwr_ctrl |
+ L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN;
+
+ ret = of_property_read_u32(np, "arm,dynamic-clock-gating", &val);
+ if (!ret) {
+ if (!val)
+ power &= ~L310_DYNAMIC_CLK_GATING_EN;
+ } else if (ret != -EINVAL) {
+ pr_err("L2C-310 OF dynamic-clock-gating property value is missing or invalid\n");
+ }
+ ret = of_property_read_u32(np, "arm,standby-mode", &val);
+ if (!ret) {
+ if (!val)
+ power &= ~L310_STNDBY_MODE_EN;
+ } else if (ret != -EINVAL) {
+ pr_err("L2C-310 OF standby-mode property value is missing or invalid\n");
+ }
+
+ l2x0_saved_regs.pwr_ctrl = power;
+}
+
+static const struct l2c_init_data of_l2c310_data __initconst = {
+ .type = "L2C-310",
+ .way_size_0 = SZ_8K,
+ .num_lock = 8,
+ .of_parse = l2c310_of_parse,
+ .enable = l2c310_enable,
+ .fixup = l2c310_fixup,
+ .save = l2c310_save,
+ .configure = l2c310_configure,
+ .unlock = l2c310_unlock,
+ .outer_cache = {
+ .inv_range = l2c210_inv_range,
+ .clean_range = l2c210_clean_range,
+ .flush_range = l2c210_flush_range,
+ .flush_all = l2c210_flush_all,
+ .disable = l2c310_disable,
+ .sync = l2c210_sync,
+ .resume = l2c310_resume,
+ },
+};
+
+/*
+ * This is a variant of the of_l2c310_data with .sync set to
+ * NULL. Outer sync operations are not needed when the system is I/O
+ * coherent, and potentially harmful in certain situations (PCIe/PL310
+ * deadlock on Armada 375/38x due to hardware I/O coherency). The
+ * other operations are kept because they are infrequent (therefore do
+ * not cause the deadlock in practice) and needed for secondary CPU
+ * boot and other power management activities.
+ */
+static const struct l2c_init_data of_l2c310_coherent_data __initconst = {
+ .type = "L2C-310 Coherent",
+ .way_size_0 = SZ_8K,
+ .num_lock = 8,
+ .of_parse = l2c310_of_parse,
+ .enable = l2c310_enable,
+ .fixup = l2c310_fixup,
+ .save = l2c310_save,
+ .configure = l2c310_configure,
+ .unlock = l2c310_unlock,
+ .outer_cache = {
+ .inv_range = l2c210_inv_range,
+ .clean_range = l2c210_clean_range,
+ .flush_range = l2c210_flush_range,
+ .flush_all = l2c210_flush_all,
+ .disable = l2c310_disable,
+ .resume = l2c310_resume,
+ },
+};
+
+/*
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive, while the hardware cache range operations use
+ * inclusive start and end addresses.
+ */
+static unsigned long aurora_range_end(unsigned long start, unsigned long end)
+{
+ /*
+ * Limit the number of cache lines processed at once,
+ * since cache range operations stall the CPU pipeline
+ * until completion.
+ */
+ if (end > start + MAX_RANGE_SIZE)
+ end = start + MAX_RANGE_SIZE;
+
+ /*
+ * Cache range operations can't straddle a page boundary.
+ */
+ if (end > PAGE_ALIGN(start+1))
+ end = PAGE_ALIGN(start+1);
+
+ return end;
+}
+
+static void aurora_pa_range(unsigned long start, unsigned long end,
+ unsigned long offset)
+{
+ void __iomem *base = l2x0_base;
+ unsigned long range_end;
+ unsigned long flags;
+
+ /*
+ * round start and end adresses up to cache line size
+ */
+ start &= ~(CACHE_LINE_SIZE - 1);
+ end = ALIGN(end, CACHE_LINE_SIZE);
+
+ /*
+ * perform operation on all full cache lines between 'start' and 'end'
+ */
+ while (start < end) {
+ range_end = aurora_range_end(start, end);
+
+ raw_spin_lock_irqsave(&l2x0_lock, flags);
+ writel_relaxed(start, base + AURORA_RANGE_BASE_ADDR_REG);
+ writel_relaxed(range_end - CACHE_LINE_SIZE, base + offset);
+ raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+
+ writel_relaxed(0, base + AURORA_SYNC_REG);
+ start = range_end;
+ }
+}
+static void aurora_inv_range(unsigned long start, unsigned long end)
+{
+ aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG);
+}
+
+static void aurora_clean_range(unsigned long start, unsigned long end)
+{
+ /*
+ * If L2 is forced to WT, the L2 will always be clean and we
+ * don't need to do anything here.
+ */
+ if (!l2_wt_override)
+ aurora_pa_range(start, end, AURORA_CLEAN_RANGE_REG);
+}
+
+static void aurora_flush_range(unsigned long start, unsigned long end)
+{
+ if (l2_wt_override)
+ aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG);
+ else
+ aurora_pa_range(start, end, AURORA_FLUSH_RANGE_REG);
+}
+
+static void aurora_flush_all(void)
+{
+ void __iomem *base = l2x0_base;
+ unsigned long flags;
+
+ /* clean all ways */
+ raw_spin_lock_irqsave(&l2x0_lock, flags);
+ __l2c_op_way(base + L2X0_CLEAN_INV_WAY);
+ raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+
+ writel_relaxed(0, base + AURORA_SYNC_REG);
+}
+
+static void aurora_cache_sync(void)
+{
+ writel_relaxed(0, l2x0_base + AURORA_SYNC_REG);
+}
+
+static void aurora_disable(void)
+{
+ void __iomem *base = l2x0_base;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&l2x0_lock, flags);
+ __l2c_op_way(base + L2X0_CLEAN_INV_WAY);
+ writel_relaxed(0, base + AURORA_SYNC_REG);
+ l2c_write_sec(0, base, L2X0_CTRL);
+ dsb(st);
+ raw_spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void aurora_save(void __iomem *base)
+{
+ l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL);
+ l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL);
+}
+
+/*
+ * For Aurora cache in no outer mode, enable via the CP15 coprocessor
+ * broadcasting of cache commands to L2.
+ */
+static void __init aurora_enable_no_outer(void __iomem *base,
+ unsigned num_lock)
+{
+ u32 u;
+
+ asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u));
+ u |= AURORA_CTRL_FW; /* Set the FW bit */
+ asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u));
+
+ isb();
+
+ l2c_enable(base, num_lock);
+}
+
+static void __init aurora_fixup(void __iomem *base, u32 cache_id,
+ struct outer_cache_fns *fns)
+{
+ sync_reg_offset = AURORA_SYNC_REG;
+}
+
+static void __init aurora_of_parse(const struct device_node *np,
+ u32 *aux_val, u32 *aux_mask)
+{
+ u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU;
+ u32 mask = AURORA_ACR_REPLACEMENT_MASK;
+
+ of_property_read_u32(np, "cache-id-part",
+ &cache_id_part_number_from_dt);
+
+ /* Determine and save the write policy */
+ l2_wt_override = of_property_read_bool(np, "wt-override");
+
+ if (l2_wt_override) {
+ val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY;
+ mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK;
+ }
+
+ *aux_val &= ~mask;
+ *aux_val |= val;
+ *aux_mask &= ~mask;
+}
+
+static const struct l2c_init_data of_aurora_with_outer_data __initconst = {
+ .type = "Aurora",
+ .way_size_0 = SZ_4K,
+ .num_lock = 4,
+ .of_parse = aurora_of_parse,
+ .enable = l2c_enable,
+ .fixup = aurora_fixup,
+ .save = aurora_save,
+ .configure = l2c_configure,
+ .unlock = l2c_unlock,
+ .outer_cache = {
+ .inv_range = aurora_inv_range,
+ .clean_range = aurora_clean_range,
+ .flush_range = aurora_flush_range,
+ .flush_all = aurora_flush_all,
+ .disable = aurora_disable,
+ .sync = aurora_cache_sync,
+ .resume = l2c_resume,
+ },
+};
+
+static const struct l2c_init_data of_aurora_no_outer_data __initconst = {
+ .type = "Aurora",
+ .way_size_0 = SZ_4K,
+ .num_lock = 4,
+ .of_parse = aurora_of_parse,
+ .enable = aurora_enable_no_outer,
+ .fixup = aurora_fixup,
+ .save = aurora_save,
+ .configure = l2c_configure,
+ .unlock = l2c_unlock,
+ .outer_cache = {
+ .resume = l2c_resume,
+ },
+};
+
+/*
+ * For certain Broadcom SoCs, depending on the address range, different offsets
+ * need to be added to the address before passing it to L2 for
+ * invalidation/clean/flush
+ *
+ * Section Address Range Offset EMI
+ * 1 0x00000000 - 0x3FFFFFFF 0x80000000 VC
+ * 2 0x40000000 - 0xBFFFFFFF 0x40000000 SYS
+ * 3 0xC0000000 - 0xFFFFFFFF 0x80000000 VC
+ *
+ * When the start and end addresses have crossed two different sections, we
+ * need to break the L2 operation into two, each within its own section.
+ * For example, if we need to invalidate addresses starts at 0xBFFF0000 and
+ * ends at 0xC0001000, we need do invalidate 1) 0xBFFF0000 - 0xBFFFFFFF and 2)
+ * 0xC0000000 - 0xC0001000
+ *
+ * Note 1:
+ * By breaking a single L2 operation into two, we may potentially suffer some
+ * performance hit, but keep in mind the cross section case is very rare
+ *
+ * Note 2:
+ * We do not need to handle the case when the start address is in
+ * Section 1 and the end address is in Section 3, since it is not a valid use
+ * case
+ *
+ * Note 3:
+ * Section 1 in practical terms can no longer be used on rev A2. Because of
+ * that the code does not need to handle section 1 at all.
+ *
+ */
+#define BCM_SYS_EMI_START_ADDR 0x40000000UL
+#define BCM_VC_EMI_SEC3_START_ADDR 0xC0000000UL
+
+#define BCM_SYS_EMI_OFFSET 0x40000000UL
+#define BCM_VC_EMI_OFFSET 0x80000000UL
+
+static inline int bcm_addr_is_sys_emi(unsigned long addr)
+{
+ return (addr >= BCM_SYS_EMI_START_ADDR) &&
+ (addr < BCM_VC_EMI_SEC3_START_ADDR);
+}
+
+static inline unsigned long bcm_l2_phys_addr(unsigned long addr)
+{
+ if (bcm_addr_is_sys_emi(addr))
+ return addr + BCM_SYS_EMI_OFFSET;
+ else
+ return addr + BCM_VC_EMI_OFFSET;
+}
+
+static void bcm_inv_range(unsigned long start, unsigned long end)
+{
+ unsigned long new_start, new_end;
+
+ BUG_ON(start < BCM_SYS_EMI_START_ADDR);
+
+ if (unlikely(end <= start))
+ return;
+
+ new_start = bcm_l2_phys_addr(start);
+ new_end = bcm_l2_phys_addr(end);
+
+ /* normal case, no cross section between start and end */
+ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
+ l2c210_inv_range(new_start, new_end);
+ return;
+ }
+
+ /* They cross sections, so it can only be a cross from section
+ * 2 to section 3
+ */
+ l2c210_inv_range(new_start,
+ bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
+ l2c210_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+ new_end);
+}
+
+static void bcm_clean_range(unsigned long start, unsigned long end)
+{
+ unsigned long new_start, new_end;
+
+ BUG_ON(start < BCM_SYS_EMI_START_ADDR);
+
+ if (unlikely(end <= start))
+ return;
+
+ new_start = bcm_l2_phys_addr(start);
+ new_end = bcm_l2_phys_addr(end);
+
+ /* normal case, no cross section between start and end */
+ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
+ l2c210_clean_range(new_start, new_end);
+ return;
+ }
+
+ /* They cross sections, so it can only be a cross from section
+ * 2 to section 3
+ */
+ l2c210_clean_range(new_start,
+ bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
+ l2c210_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+ new_end);
+}
+
+static void bcm_flush_range(unsigned long start, unsigned long end)
+{
+ unsigned long new_start, new_end;
+
+ BUG_ON(start < BCM_SYS_EMI_START_ADDR);
+
+ if (unlikely(end <= start))
+ return;
+
+ if ((end - start) >= l2x0_size) {
+ outer_cache.flush_all();
+ return;
+ }
+
+ new_start = bcm_l2_phys_addr(start);
+ new_end = bcm_l2_phys_addr(end);
+
+ /* normal case, no cross section between start and end */
+ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
+ l2c210_flush_range(new_start, new_end);
+ return;
+ }
+
+ /* They cross sections, so it can only be a cross from section
+ * 2 to section 3
+ */
+ l2c210_flush_range(new_start,
+ bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
+ l2c210_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+ new_end);
+}
+
+/* Broadcom L2C-310 start from ARMs R3P2 or later, and require no fixups */
+static const struct l2c_init_data of_bcm_l2x0_data __initconst = {
+ .type = "BCM-L2C-310",
+ .way_size_0 = SZ_8K,
+ .num_lock = 8,
+ .of_parse = l2c310_of_parse,
+ .enable = l2c310_enable,
+ .save = l2c310_save,
+ .configure = l2c310_configure,
+ .unlock = l2c310_unlock,
+ .outer_cache = {
+ .inv_range = bcm_inv_range,
+ .clean_range = bcm_clean_range,
+ .flush_range = bcm_flush_range,
+ .flush_all = l2c210_flush_all,
+ .disable = l2c310_disable,
+ .sync = l2c210_sync,
+ .resume = l2c310_resume,
+ },
+};
+
+static void __init tauros3_save(void __iomem *base)
+{
+ l2c_save(base);
+
+ l2x0_saved_regs.aux2_ctrl =
+ readl_relaxed(base + TAUROS3_AUX2_CTRL);
+ l2x0_saved_regs.prefetch_ctrl =
+ readl_relaxed(base + L310_PREFETCH_CTRL);
+}
+
+static void tauros3_configure(void __iomem *base)
+{
+ l2c_configure(base);
+ writel_relaxed(l2x0_saved_regs.aux2_ctrl,
+ base + TAUROS3_AUX2_CTRL);
+ writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
+ base + L310_PREFETCH_CTRL);
+}
+
+static const struct l2c_init_data of_tauros3_data __initconst = {
+ .type = "Tauros3",
+ .way_size_0 = SZ_8K,
+ .num_lock = 8,
+ .enable = l2c_enable,
+ .save = tauros3_save,
+ .configure = tauros3_configure,
+ .unlock = l2c_unlock,
+ /* Tauros3 broadcasts L1 cache operations to L2 */
+ .outer_cache = {
+ .resume = l2c_resume,
+ },
+};
+
+#define L2C_ID(name, fns) { .compatible = name, .data = (void *)&fns }
+static const struct of_device_id l2x0_ids[] __initconst = {
+ L2C_ID("arm,l210-cache", of_l2c210_data),
+ L2C_ID("arm,l220-cache", of_l2c220_data),
+ L2C_ID("arm,pl310-cache", of_l2c310_data),
+ L2C_ID("brcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data),
+ L2C_ID("marvell,aurora-outer-cache", of_aurora_with_outer_data),
+ L2C_ID("marvell,aurora-system-cache", of_aurora_no_outer_data),
+ L2C_ID("marvell,tauros3-cache", of_tauros3_data),
+ /* Deprecated IDs */
+ L2C_ID("bcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data),
+ {}
+};
+
+int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
+{
+ const struct l2c_init_data *data;
+ struct device_node *np;
+ struct resource res;
+ u32 cache_id, old_aux;
+ u32 cache_level = 2;
+ bool nosync = false;
+
+ np = of_find_matching_node(NULL, l2x0_ids);
+ if (!np)
+ return -ENODEV;
+
+ if (of_address_to_resource(np, 0, &res))
+ return -ENODEV;
+
+ l2x0_base = ioremap(res.start, resource_size(&res));
+ if (!l2x0_base)
+ return -ENOMEM;
+
+ l2x0_saved_regs.phy_base = res.start;
+
+ data = of_match_node(l2x0_ids, np)->data;
+
+ if (of_device_is_compatible(np, "arm,pl310-cache") &&
+ of_property_read_bool(np, "arm,io-coherent"))
+ data = &of_l2c310_coherent_data;
+
+ old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+ if (old_aux != ((old_aux & aux_mask) | aux_val)) {
+ pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n",
+ old_aux, (old_aux & aux_mask) | aux_val);
+ } else if (aux_mask != ~0U && aux_val != 0) {
+ pr_alert("L2C: platform provided aux values match the hardware, so have no effect. Please remove them.\n");
+ }
+
+ /* All L2 caches are unified, so this property should be specified */
+ if (!of_property_read_bool(np, "cache-unified"))
+ pr_err("L2C: device tree omits to specify unified cache\n");
+
+ if (of_property_read_u32(np, "cache-level", &cache_level))
+ pr_err("L2C: device tree omits to specify cache-level\n");
+
+ if (cache_level != 2)
+ pr_err("L2C: device tree specifies invalid cache level\n");
+
+ nosync = of_property_read_bool(np, "arm,outer-sync-disable");
+
+ /* Read back current (default) hardware configuration */
+ if (data->save)
+ data->save(l2x0_base);
+
+ /* L2 configuration can only be changed if the cache is disabled */
+ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN))
+ if (data->of_parse)
+ data->of_parse(np, &aux_val, &aux_mask);
+
+ if (cache_id_part_number_from_dt)
+ cache_id = cache_id_part_number_from_dt;
+ else
+ cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
+
+ return __l2c_init(data, aux_val, aux_mask, cache_id, nosync);
+}
+#endif