v4.19.13 snapshot.
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
new file mode 100644
index 0000000..a68b341
--- /dev/null
+++ b/arch/arm/mach-pxa/Kconfig
@@ -0,0 +1,717 @@
+if ARCH_PXA
+
+menu "Intel PXA2xx/PXA3xx Implementations"
+
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
+
+config MACH_PXA25X_DT
+ bool "Support PXA25x platforms from device tree"
+ select PINCTRL
+ select POWER_SUPPLY
+ select PXA25x
+ select USE_OF
+ help
+ Include support for Marvell PXA25x based platforms using
+ the device tree. Needn't select any other machine while
+ MACH_PXA25x_DT is enabled.
+
+config MACH_PXA27X_DT
+ bool "Support PXA27x platforms from device tree"
+ select PINCTRL
+ select POWER_SUPPLY
+ select PXA27x
+ select USE_OF
+ help
+ Include support for Marvell PXA27x based platforms using
+ the device tree. Needn't select any other machine while
+ MACH_PXA27X_DT is enabled.
+
+config MACH_PXA3XX_DT
+ bool "Support PXA3xx platforms from device tree"
+ select CPU_PXA300
+ select PINCTRL
+ select POWER_SUPPLY
+ select PXA3xx
+ select USE_OF
+ help
+ Include support for Marvell PXA3xx based platforms using
+ the device tree. Needn't select any other machine while
+ MACH_PXA3XX_DT is enabled.
+
+config ARCH_LUBBOCK
+ bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+ select GPIO_REG
+ select PXA25x
+ select SA1111
+
+config MACH_MAINSTONE
+ bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+ select PXA27x
+
+config MACH_ZYLONITE
+ bool
+ select PXA3xx
+
+config MACH_ZYLONITE300
+ bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
+ select CPU_PXA300
+ select CPU_PXA310
+ select MACH_ZYLONITE
+
+config MACH_ZYLONITE320
+ bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+ select CPU_PXA320
+ select MACH_ZYLONITE
+
+config MACH_LITTLETON
+ bool "PXA3xx Form Factor Platform (aka Littleton)"
+ select CPU_PXA300
+ select CPU_PXA310
+ select PXA3xx
+
+config MACH_TAVOREVB
+ bool "PXA930 Evaluation Board (aka TavorEVB)"
+ select CPU_PXA930
+ select CPU_PXA935
+ select PXA3xx
+ select FB
+ select FB_PXA
+
+config MACH_SAAR
+ bool "PXA930 Handheld Platform (aka SAAR)"
+ select CPU_PXA930
+ select CPU_PXA935
+ select PXA3xx
+ select FB
+ select FB_PXA
+
+comment "Third Party Dev Platforms (sorted by vendor name)"
+
+config ARCH_PXA_IDP
+ bool "Accelent Xscale IDP"
+ select PXA25x
+
+config ARCH_VIPER
+ bool "Arcom/Eurotech VIPER SBC"
+ select ARCOM_PCMCIA
+ select I2C_GPIO if I2C=y
+ select ISA
+ select PXA25x
+
+config MACH_ARCOM_ZEUS
+ bool "Arcom/Eurotech ZEUS SBC"
+ select ARCOM_PCMCIA
+ select ISA
+ select PXA27x
+
+config MACH_BALLOON3
+ bool "Balloon 3 board"
+ select IWMMXT
+ select PXA27x
+
+config MACH_CSB726
+ bool "Enable Cogent CSB726 System On a Module"
+ select IWMMXT
+ select PXA27x
+ help
+ Say Y here if you intend to run this kernel on a Cogent
+ CSB726 System On Module.
+
+config CSB726_CSB701
+ bool "Enable support for CSB701 baseboard"
+ depends on MACH_CSB726
+
+config MACH_ARMCORE
+ bool "CompuLab CM-X255/CM-X270 modules"
+ select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
+ select IWMMXT
+ select MIGHT_HAVE_PCI
+ select NEED_MACH_IO_H if PCI
+ select PXA25x
+ select PXA27x
+
+config MACH_EM_X270
+ bool "CompuLab EM-x270 platform"
+ select PXA27x
+
+config MACH_EXEDA
+ bool "CompuLab eXeda platform"
+ select PXA27x
+
+config MACH_CM_X300
+ bool "CompuLab CM-X300 modules"
+ select CPU_PXA300
+ select CPU_PXA310
+ select PXA3xx
+
+config MACH_CAPC7117
+ bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+ select CPU_PXA320
+ select PXA3xx
+
+config ARCH_GUMSTIX
+ bool "Gumstix XScale 255 boards"
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on
+ Basix, Connex, ws-200ax, ws-400ax systems
+
+choice
+ prompt "Gumstix Carrier/Expansion Board"
+ depends on ARCH_GUMSTIX
+
+config GUMSTIX_AM200EPD
+ bool "Enable AM200EPD board support"
+
+config GUMSTIX_AM300EPD
+ bool "Enable AM300EPD board support"
+
+endchoice
+
+config MACH_INTELMOTE2
+ bool "Intel Mote 2 Platform"
+ select IWMMXT
+ select PXA27x
+
+config MACH_STARGATE2
+ bool "Intel Stargate 2 Platform"
+ select IWMMXT
+ select PXA27x
+
+config MACH_XCEP
+ bool "Iskratel Electronics XCEP"
+ select MTD
+ select MTD_CFI
+ select MTD_CFI_INTELEXT
+ select MTD_PHYSMAP
+ select PXA25x
+ help
+ PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+ Tuned for usage in Libera instruments for particle accelerators.
+
+config TRIZEPS_PXA
+ bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
+config MACH_TRIZEPS4
+ bool "Keith und Koep Trizeps4 DIMM-Module"
+ depends on TRIZEPS_PXA
+ select PXA27x
+ select TRIZEPS_PCMCIA
+
+config MACH_TRIZEPS4WL
+ bool "Keith und Koep Trizeps4-WL DIMM-Module"
+ depends on TRIZEPS_PXA
+ select MACH_TRIZEPS4
+ select PXA27x
+ select TRIZEPS_PCMCIA
+
+choice
+ prompt "Select base board for Trizeps module"
+ depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
+ bool "ConXS Eval Board"
+
+config MACH_TRIZEPS_UCONXS
+ bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+ bool "another Board"
+
+endchoice
+
+config ARCOM_PCMCIA
+ bool
+ help
+ Generic option for Arcom Viper/Zeus PCMCIA
+
+config TRIZEPS_PCMCIA
+ bool
+ help
+ Enable PCMCIA support for Trizeps modules
+
+config MACH_LOGICPD_PXA270
+ bool "LogicPD PXA270 Card Engine Development Platform"
+ select PXA27x
+
+config MACH_PCM027
+ bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+ select IWMMXT
+ select PXA27x
+
+config MACH_PCM990_BASEBOARD
+ bool "PHYTEC PCM-990 development board"
+ depends on MACH_PCM027
+
+choice
+ prompt "display on pcm990"
+ depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+ bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+ bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+ bool "no display"
+
+endchoice
+
+config MACH_COLIBRI
+ bool "Toradex Colibri PXA270"
+ select PXA27x
+
+config MACH_COLIBRI_PXA270_INCOME
+ bool "Income s.r.o. PXA270 SBC"
+ depends on MACH_COLIBRI
+ select PXA27x
+
+config MACH_COLIBRI300
+ bool "Toradex Colibri PXA300/310"
+ select CPU_PXA300
+ select CPU_PXA310
+ select PXA3xx
+
+config MACH_COLIBRI320
+ bool "Toradex Colibri PXA320"
+ select CPU_PXA320
+ select PXA3xx
+
+config MACH_COLIBRI_EVALBOARD
+ bool "Toradex Colibri Evaluation Carrier Board support"
+ depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
+
+config MACH_VPAC270
+ bool "Voipac PXA270"
+ select HAVE_PATA_PLATFORM
+ select PXA27x
+ help
+ PXA270 based Single Board Computer.
+
+comment "End-user Products (sorted by vendor name)"
+
+config MACH_H4700
+ bool "HP iPAQ hx4700"
+ select IWMMXT
+ select PXA27x
+
+config MACH_H5000
+ bool "HP iPAQ h5000"
+ select PXA25x
+
+config MACH_HIMALAYA
+ bool "HTC Himalaya Support"
+ select CPU_PXA26x
+
+config MACH_MAGICIAN
+ bool "Enable HTC Magician Support"
+ select IWMMXT
+ select PXA27x
+
+config MACH_MIOA701
+ bool "Mitac Mio A701 Support"
+ select IWMMXT
+ select PXA27x
+ help
+ Say Y here if you intend to run this kernel on a
+ MIO A701. Currently there is only basic support
+ for this PDA.
+
+config PXA_EZX
+ bool "Motorola EZX Platform"
+ select IWMMXT
+ select PXA27x
+
+config MACH_EZX_A780
+ bool "Motorola EZX A780"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E680
+ bool "Motorola EZX E680"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_A1200
+ bool "Motorola EZX A1200"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_A910
+ bool "Motorola EZX A910"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E6
+ bool "Motorola EZX E6"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E2
+ bool "Motorola EZX E2"
+ default y
+ depends on PXA_EZX
+
+config MACH_MP900C
+ bool "Nec Mobilepro 900/c"
+ select PXA25x
+
+config ARCH_PXA_PALM
+ bool "PXA based Palm PDAs"
+
+config MACH_PALM27X
+ bool
+
+config MACH_PALMTE2
+ bool "Palm Tungsten|E2"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+ handheld computer.
+
+config MACH_PALMTC
+ bool "Palm Tungsten|C"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|C
+ handheld computer.
+
+config MACH_PALMT5
+ bool "Palm Tungsten|T5"
+ default y
+ depends on ARCH_PXA_PALM
+ select IWMMXT
+ select MACH_PALM27X
+ select PXA27x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+ handheld computer.
+
+config MACH_PALMTX
+ bool "Palm T|X"
+ default y
+ depends on ARCH_PXA_PALM
+ select IWMMXT
+ select MACH_PALM27X
+ select PXA27x
+ help
+ Say Y here if you intend to run this kernel on a Palm T|X
+ handheld computer.
+
+config MACH_PALMZ72
+ bool "Palm Zire 72"
+ default y
+ depends on ARCH_PXA_PALM
+ select IWMMXT
+ select MACH_PALM27X
+ select PXA27x
+ help
+ Say Y here if you intend to run this kernel on Palm Zire 72
+ handheld computer.
+
+config MACH_PALMLD
+ bool "Palm LifeDrive"
+ default y
+ depends on ARCH_PXA_PALM
+ select IWMMXT
+ select MACH_PALM27X
+ select PXA27x
+ help
+ Say Y here if you intend to run this kernel on a Palm LifeDrive
+ handheld computer.
+
+config PALM_TREO
+ bool
+ depends on ARCH_PXA_PALM
+
+config MACH_CENTRO
+ bool "Palm Centro 685 (GSM)"
+ default y
+ depends on ARCH_PXA_PALM
+ select IWMMXT
+ select MACH_PALM27X
+ select PALM_TREO
+ select PXA27x
+ help
+ Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
+ smartphone.
+
+config MACH_TREO680
+ bool "Palm Treo 680"
+ default y
+ depends on ARCH_PXA_PALM
+ select IWMMXT
+ select MACH_PALM27X
+ select PALM_TREO
+ select PXA27x
+ help
+ Say Y here if you intend to run this kernel on Palm Treo 680
+ smartphone.
+
+config MACH_RAUMFELD_RC
+ bool "Raumfeld Controller"
+ select CPU_PXA300
+ select POWER_SUPPLY
+ select PXA3xx
+
+config MACH_RAUMFELD_CONNECTOR
+ bool "Raumfeld Connector"
+ select CPU_PXA300
+ select POWER_SUPPLY
+ select PXA3xx
+
+config MACH_RAUMFELD_SPEAKER
+ bool "Raumfeld Speaker"
+ select CPU_PXA300
+ select POWER_SUPPLY
+ select PXA3xx
+
+config PXA_SHARPSL
+ bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
+ select SHARP_PARAM
+ select SHARP_SCOOP
+ help
+ Say Y here if you intend to run this kernel on a
+ Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
+ SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
+ SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
+ handheld computer.
+
+config PXA_SHARPSL_DETECT_MACH_ID
+ bool "Detect machine ID at run-time in the decompressor"
+ depends on PXA_SHARPSL
+ help
+ Say Y here if you want the zImage decompressor to detect
+ the Zaurus machine ID at run-time. For latest kexec-based
+ boot loader, this is not necessary.
+
+config MACH_POODLE
+ bool "Enable Sharp SL-5600 (Poodle) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select SHARP_LOCOMO
+
+config MACH_CORGI
+ bool "Enable Sharp SL-C700 (Corgi) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+ bool "Enable Sharp SL-C750 (Shepherd) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+ bool "Enable Sharp SL-C760 (Husky) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
+
+config MACH_AKITA
+ bool "Enable Sharp SL-1000 (Akita) Support"
+ depends on PXA_SHARPSL
+ select I2C
+ select I2C_PXA
+ select MACH_SPITZ
+ select PXA27x
+ select PXA_SHARP_Cxx00
+
+config MACH_SPITZ
+ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+ depends on PXA_SHARPSL
+ select PXA27x
+ select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+ bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+ depends on PXA_SHARPSL
+ select PXA27x
+ select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+ bool "Enable Sharp SL-6000x (Tosa) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+
+config TOSA_BT
+ tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+ depends on MACH_TOSA && NET
+ select RFKILL
+ help
+ This is a simple driver that is able to control
+ the state of built in bluetooth chip on tosa.
+
+config TOSA_USE_EXT_KEYCODES
+ bool "Tosa keyboard: use extended keycodes"
+ depends on MACH_TOSA
+ default n
+ help
+ Say Y here to enable the tosa keyboard driver to generate extended
+ (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+ by either console keyboard driver or by Kdrive keybd driver.
+
+ Say Y only if you know, what you are doing!
+
+config MACH_ICONTROL
+ bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+ select CPU_PXA320
+ select PXA3xx
+
+config ARCH_PXA_ESERIES
+ bool "PXA based Toshiba e-series PDAs"
+ select FB_W100
+ select FB
+ select PXA25x
+
+config MACH_E330
+ bool "Toshiba e330"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e330 family PDA.
+
+config MACH_E350
+ bool "Toshiba e350"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e350 family PDA.
+
+config MACH_E740
+ bool "Toshiba e740"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e740 family PDA.
+
+config MACH_E750
+ bool "Toshiba e750"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e750 family PDA.
+
+config MACH_E400
+ bool "Toshiba e400"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e400 family PDA.
+
+config MACH_E800
+ bool "Toshiba e800"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e800 family PDA.
+
+config MACH_ZIPIT2
+ bool "Zipit Z2 Handheld"
+ select PXA27x
+endmenu
+
+config PXA25x
+ bool
+ select CPU_XSCALE
+ help
+ Select code specific to PXA21x/25x/26x variants
+
+config PXA27x
+ bool
+ select CPU_XSCALE
+ help
+ Select code specific to PXA27x variants
+
+config CPU_PXA26x
+ bool
+ select PXA25x
+ help
+ Select code specific to PXA26x (codename Dalhart)
+
+config PXA3xx
+ bool
+ select CPU_XSC3
+ help
+ Select code specific to PXA3xx variants
+
+config CPU_PXA300
+ bool
+ select PXA3xx
+ help
+ PXA300 (codename Monahans-L)
+
+config CPU_PXA310
+ bool
+ select CPU_PXA300
+ select PXA310_ULPI if USB_ULPI
+ help
+ PXA310 (codename Monahans-LV)
+
+config CPU_PXA320
+ bool
+ select PXA3xx
+ help
+ PXA320 (codename Monahans-P)
+
+config CPU_PXA930
+ bool
+ select PXA3xx
+ help
+ PXA930 (codename Tavor-P)
+
+config CPU_PXA935
+ bool
+ select CPU_PXA930
+ help
+ PXA935 (codename Tavor-P65)
+
+config PXA_SHARP_C7xx
+ bool
+ select SHARPSL_PM
+ help
+ Enable support for all Sharp C7xx models
+
+config PXA_SHARP_Cxx00
+ bool
+ select SHARPSL_PM
+ help
+ Enable common support for Sharp Cxx00 models
+
+config SHARPSL_PM
+ bool
+ select APM_EMULATION
+ select SHARPSL_PM_MAX1111
+
+config SHARPSL_PM_MAX1111
+ bool
+ select HWMON
+ select SENSORS_MAX1111
+ select SPI
+ select SPI_MASTER
+
+config PXA310_ULPI
+ bool
+
+config PXA_SYSTEMS_CPLDS
+ tristate "Motherboard cplds"
+ default ARCH_LUBBOCK || MACH_MAINSTONE
+ help
+ This driver supports the Lubbock and Mainstone multifunction chip
+ found on the pxa25x development platform system (Lubbock) and pxa27x
+ development platform system (Mainstone). This IO board supports the
+ interrupts handling, ethernet controller, flash chips, etc ...
+
+endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
new file mode 100644
index 0000000..0a8e961
--- /dev/null
+++ b/arch/arm/mach-pxa/Makefile
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+# Common support (must be linked before board specific support)
+obj-y += devices.o generic.o irq.o reset.o
+obj-$(CONFIG_PM) += pm.o sleep.o standby.o
+
+# Generic drivers that other drivers may depend upon
+
+# SoC-specific code
+obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_CPU_PXA300) += pxa300.o
+obj-$(CONFIG_CPU_PXA320) += pxa320.o
+obj-$(CONFIG_CPU_PXA930) += pxa930.o
+
+# NOTE: keep the order of boards in accordance to their order in Kconfig
+
+# Device Tree support
+obj-$(CONFIG_MACH_PXA25X_DT) += pxa-dt.o
+obj-$(CONFIG_MACH_PXA27X_DT) += pxa-dt.o
+obj-$(CONFIG_MACH_PXA3XX_DT) += pxa-dt.o
+
+# Intel/Marvell Dev Platforms
+obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
+obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
+obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o
+obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o
+obj-$(CONFIG_MACH_LITTLETON) += littleton.o
+obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
+obj-$(CONFIG_MACH_SAAR) += saar.o
+
+# 3rd Party Dev Platforms
+obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
+obj-$(CONFIG_ARCH_VIPER) += viper.o
+obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o
+obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
+obj-$(CONFIG_MACH_CSB726) += csb726.o
+obj-$(CONFIG_CSB726_CSB701) += csb701.o
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
+ifeq ($(CONFIG_PCI),y)
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
+endif
+obj-$(CONFIG_MACH_EM_X270) += em-x270.o
+obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
+obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o
+obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
+obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
+obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
+obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o
+obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
+obj-$(CONFIG_MACH_XCEP) += xcep.o
+obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
+obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
+obj-$(CONFIG_MACH_PCM027) += pcm027.o
+obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
+obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI_EVALBOARD) += colibri-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o
+obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
+obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
+obj-$(CONFIG_MACH_VPAC270) += vpac270.o
+
+# End-user Products
+obj-$(CONFIG_MACH_H4700) += hx4700.o
+obj-$(CONFIG_MACH_H5000) += h5000.o
+obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
+obj-$(CONFIG_MACH_MAGICIAN) += magician.o
+obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_PXA_EZX) += ezx.o
+obj-$(CONFIG_MACH_MP900C) += mp900.o
+obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
+obj-$(CONFIG_MACH_PALMTC) += palmtc.o
+obj-$(CONFIG_MACH_PALM27X) += palm27x.o
+obj-$(CONFIG_MACH_PALMT5) += palmt5.o
+obj-$(CONFIG_MACH_PALMTX) += palmtx.o
+obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
+obj-$(CONFIG_MACH_PALMLD) += palmld.o
+obj-$(CONFIG_PALM_TREO) += palmtreo.o
+obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
+obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
+obj-$(CONFIG_MACH_POODLE) += poodle.o
+obj-$(CONFIG_MACH_TOSA) += tosa.o
+obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o
+obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
+obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
+obj-$(CONFIG_MACH_ZIPIT2) += z2.o
+
+obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o
+obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/Makefile.boot b/arch/arm/mach-pxa/Makefile.boot
new file mode 100644
index 0000000..2c1ae92
--- /dev/null
+++ b/arch/arm/mach-pxa/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y += 0xa0008000
+
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
new file mode 100644
index 0000000..50e18ed
--- /dev/null
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -0,0 +1,386 @@
+/*
+ * am200epd.c -- Platform device for AM200 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Lyre interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include "pxa25x.h"
+#include "gumstix.h"
+#include <linux/platform_data/video-pxafb.h>
+
+#include "generic.h"
+
+#include <video/metronomefb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am200_device;
+static struct metronome_board am200_board;
+
+static struct pxafb_mode_info am200_fb_mode_9inch7 = {
+ .pixclock = 40000,
+ .xres = 1200,
+ .yres = 842,
+ .bpp = 16,
+ .hsync_len = 2,
+ .left_margin = 2,
+ .right_margin = 2,
+ .vsync_len = 1,
+ .upper_margin = 2,
+ .lower_margin = 25,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_8inch = {
+ .pixclock = 40000,
+ .xres = 1088,
+ .yres = 791,
+ .bpp = 16,
+ .hsync_len = 28,
+ .left_margin = 8,
+ .right_margin = 30,
+ .vsync_len = 8,
+ .upper_margin = 10,
+ .lower_margin = 8,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_6inch = {
+ .pixclock = 40189,
+ .xres = 832,
+ .yres = 622,
+ .bpp = 16,
+ .hsync_len = 28,
+ .left_margin = 34,
+ .right_margin = 34,
+ .vsync_len = 25,
+ .upper_margin = 0,
+ .lower_margin = 2,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info am200_fb_info = {
+ .modes = &am200_fb_mode_6inch,
+ .num_modes = 1,
+ .lcd_conn = LCD_TYPE_COLOR_TFT | LCD_PCLK_EDGE_FALL |
+ LCD_AC_BIAS_FREQ(24),
+};
+
+/* register offsets for gpio control */
+#define LED_GPIO_PIN 51
+#define STDBY_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define RDY_GPIO_PIN 32
+#define ERR_GPIO_PIN 17
+#define PCBPWR_GPIO_PIN 16
+static int gpios[] = { LED_GPIO_PIN , STDBY_GPIO_PIN , RST_GPIO_PIN,
+ RDY_GPIO_PIN, ERR_GPIO_PIN, PCBPWR_GPIO_PIN };
+static char *gpio_names[] = { "LED" , "STDBY" , "RST", "RDY", "ERR", "PCBPWR" };
+
+static int am200_init_gpio_regs(struct metronomefb_par *par)
+{
+ int i;
+ int err;
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ err = gpio_request(gpios[i], gpio_names[i]);
+ if (err) {
+ dev_err(&am200_device->dev, "failed requesting "
+ "gpio %s, err=%d\n", gpio_names[i], err);
+ goto err_req_gpio;
+ }
+ }
+
+ gpio_direction_output(LED_GPIO_PIN, 0);
+ gpio_direction_output(STDBY_GPIO_PIN, 0);
+ gpio_direction_output(RST_GPIO_PIN, 0);
+
+ gpio_direction_input(RDY_GPIO_PIN);
+ gpio_direction_input(ERR_GPIO_PIN);
+
+ gpio_direction_output(PCBPWR_GPIO_PIN, 0);
+
+ return 0;
+
+err_req_gpio:
+ while (--i >= 0)
+ gpio_free(gpios[i]);
+
+ return err;
+}
+
+static void am200_cleanup(struct metronomefb_par *par)
+{
+ int i;
+
+ free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++)
+ gpio_free(gpios[i]);
+}
+
+static int am200_share_video_mem(struct fb_info *info)
+{
+ /* rough check if this is our desired fb and not something else */
+ if ((info->var.xres != am200_fb_info.modes->xres)
+ || (info->var.yres != am200_fb_info.modes->yres))
+ return 0;
+
+ /* we've now been notified that we have our new fb */
+ am200_board.metromem = info->screen_base;
+ am200_board.host_fbinfo = info;
+
+ /* try to refcount host drv since we are the consumer after this */
+ if (!try_module_get(info->fbops->owner))
+ return -ENODEV;
+
+ return 0;
+}
+
+static int am200_unshare_video_mem(struct fb_info *info)
+{
+ dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+ if (info != am200_board.host_fbinfo)
+ return 0;
+
+ module_put(am200_board.host_fbinfo->fbops->owner);
+ return 0;
+}
+
+static int am200_fb_notifier_callback(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ struct fb_event *evdata = data;
+ struct fb_info *info = evdata->info;
+
+ dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+ if (event == FB_EVENT_FB_REGISTERED)
+ return am200_share_video_mem(info);
+ else if (event == FB_EVENT_FB_UNREGISTERED)
+ return am200_unshare_video_mem(info);
+
+ return 0;
+}
+
+static struct notifier_block am200_fb_notif = {
+ .notifier_call = am200_fb_notifier_callback,
+};
+
+/* this gets called as part of our init. these steps must be done now so
+ * that we can use pxa_set_fb_info */
+static void __init am200_presetup_fb(void)
+{
+ int fw;
+ int fh;
+ int padding_size;
+ int totalsize;
+
+ switch (panel_type) {
+ case 6:
+ am200_fb_info.modes = &am200_fb_mode_6inch;
+ break;
+ case 8:
+ am200_fb_info.modes = &am200_fb_mode_8inch;
+ break;
+ case 97:
+ am200_fb_info.modes = &am200_fb_mode_9inch7;
+ break;
+ default:
+ dev_err(&am200_device->dev, "invalid panel_type selection,"
+ " setting to 6\n");
+ am200_fb_info.modes = &am200_fb_mode_6inch;
+ break;
+ }
+
+ /* the frame buffer is divided as follows:
+ command | CRC | padding
+ 16kb waveform data | CRC | padding
+ image data | CRC
+ */
+
+ fw = am200_fb_info.modes->xres;
+ fh = am200_fb_info.modes->yres;
+
+ /* waveform must be 16k + 2 for checksum */
+ am200_board.wfm_size = roundup(16*1024 + 2, fw);
+
+ padding_size = PAGE_SIZE + (4 * fw);
+
+ /* total is 1 cmd , 1 wfm, padding and image */
+ totalsize = fw + am200_board.wfm_size + padding_size + (fw*fh);
+
+ /* save this off because we're manipulating fw after this and
+ * we'll need it when we're ready to setup the framebuffer */
+ am200_board.fw = fw;
+ am200_board.fh = fh;
+
+ /* the reason we do this adjustment is because we want to acquire
+ * more framebuffer memory without imposing custom awareness on the
+ * underlying pxafb driver */
+ am200_fb_info.modes->yres = DIV_ROUND_UP(totalsize, fw);
+
+ /* we divide since we told the LCD controller we're 16bpp */
+ am200_fb_info.modes->xres /= 2;
+
+ pxa_set_fb_info(NULL, &am200_fb_info);
+
+}
+
+/* this gets called by metronomefb as part of its init, in our case, we
+ * have already completed initial framebuffer init in presetup_fb so we
+ * can just setup the fb access pointers */
+static int am200_setup_fb(struct metronomefb_par *par)
+{
+ int fw;
+ int fh;
+
+ fw = am200_board.fw;
+ fh = am200_board.fh;
+
+ /* metromem was set up by the notifier in share_video_mem so now
+ * we can use its value to calculate the other entries */
+ par->metromem_cmd = (struct metromem_cmd *) am200_board.metromem;
+ par->metromem_wfm = am200_board.metromem + fw;
+ par->metromem_img = par->metromem_wfm + am200_board.wfm_size;
+ par->metromem_img_csum = (u16 *) (par->metromem_img + (fw * fh));
+ par->metromem_dma = am200_board.host_fbinfo->fix.smem_start;
+
+ return 0;
+}
+
+static int am200_get_panel_type(void)
+{
+ return panel_type;
+}
+
+static irqreturn_t am200_handle_irq(int irq, void *dev_id)
+{
+ struct metronomefb_par *par = dev_id;
+
+ wake_up_interruptible(&par->waitq);
+ return IRQ_HANDLED;
+}
+
+static int am200_setup_irq(struct fb_info *info)
+{
+ int ret;
+
+ ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq,
+ IRQF_TRIGGER_FALLING, "AM200", info->par);
+ if (ret)
+ dev_err(&am200_device->dev, "request_irq failed: %d\n", ret);
+
+ return ret;
+}
+
+static void am200_set_rst(struct metronomefb_par *par, int state)
+{
+ gpio_set_value(RST_GPIO_PIN, state);
+}
+
+static void am200_set_stdby(struct metronomefb_par *par, int state)
+{
+ gpio_set_value(STDBY_GPIO_PIN, state);
+}
+
+static int am200_wait_event(struct metronomefb_par *par)
+{
+ return wait_event_timeout(par->waitq, gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static int am200_wait_event_intr(struct metronomefb_par *par)
+{
+ return wait_event_interruptible_timeout(par->waitq,
+ gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static struct metronome_board am200_board = {
+ .owner = THIS_MODULE,
+ .setup_irq = am200_setup_irq,
+ .setup_io = am200_init_gpio_regs,
+ .setup_fb = am200_setup_fb,
+ .set_rst = am200_set_rst,
+ .set_stdby = am200_set_stdby,
+ .met_wait_event = am200_wait_event,
+ .met_wait_event_intr = am200_wait_event_intr,
+ .get_panel_type = am200_get_panel_type,
+ .cleanup = am200_cleanup,
+};
+
+static unsigned long am200_pin_config[] __initdata = {
+ GPIO51_GPIO,
+ GPIO49_GPIO,
+ GPIO48_GPIO,
+ GPIO32_GPIO,
+ GPIO17_GPIO,
+ GPIO16_GPIO,
+};
+
+int __init am200_init(void)
+{
+ int ret;
+
+ /* before anything else, we request notification for any fb
+ * creation events */
+ fb_register_client(&am200_fb_notif);
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(am200_pin_config));
+
+ /* request our platform independent driver */
+ request_module("metronomefb");
+
+ am200_device = platform_device_alloc("metronomefb", -1);
+ if (!am200_device)
+ return -ENOMEM;
+
+ /* the am200_board that will be seen by metronomefb is a copy */
+ platform_device_add_data(am200_device, &am200_board,
+ sizeof(am200_board));
+
+ /* this _add binds metronomefb to am200. metronomefb refcounts am200 */
+ ret = platform_device_add(am200_device);
+
+ if (ret) {
+ platform_device_put(am200_device);
+ fb_unregister_client(&am200_fb_notif);
+ return ret;
+ }
+
+ am200_presetup_fb();
+
+ return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
new file mode 100644
index 0000000..17d08ab
--- /dev/null
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -0,0 +1,296 @@
+/*
+ * am300epd.c -- Platform device for AM300 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Broadsheet interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include "gumstix.h"
+#include "mfp-pxa25x.h"
+#include <mach/irqs.h>
+#include <linux/platform_data/video-pxafb.h>
+
+#include "generic.h"
+
+#include <video/broadsheetfb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am300_device;
+static struct broadsheet_board am300_board;
+
+static unsigned long am300_pin_config[] __initdata = {
+ GPIO16_GPIO,
+ GPIO17_GPIO,
+ GPIO32_GPIO,
+ GPIO48_GPIO,
+ GPIO49_GPIO,
+ GPIO51_GPIO,
+ GPIO74_GPIO,
+ GPIO75_GPIO,
+ GPIO76_GPIO,
+ GPIO77_GPIO,
+
+ /* this is the 16-bit hdb bus 58-73 */
+ GPIO58_GPIO,
+ GPIO59_GPIO,
+ GPIO60_GPIO,
+ GPIO61_GPIO,
+
+ GPIO62_GPIO,
+ GPIO63_GPIO,
+ GPIO64_GPIO,
+ GPIO65_GPIO,
+
+ GPIO66_GPIO,
+ GPIO67_GPIO,
+ GPIO68_GPIO,
+ GPIO69_GPIO,
+
+ GPIO70_GPIO,
+ GPIO71_GPIO,
+ GPIO72_GPIO,
+ GPIO73_GPIO,
+};
+
+/* register offsets for gpio control */
+#define PWR_GPIO_PIN 16
+#define CFG_GPIO_PIN 17
+#define RDY_GPIO_PIN 32
+#define DC_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define LED_GPIO_PIN 51
+#define RD_GPIO_PIN 74
+#define WR_GPIO_PIN 75
+#define CS_GPIO_PIN 76
+#define IRQ_GPIO_PIN 77
+
+/* hdb bus */
+#define DB0_GPIO_PIN 58
+#define DB15_GPIO_PIN 73
+
+static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
+ RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
+ IRQ_GPIO_PIN, LED_GPIO_PIN };
+static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
+ "CS", "IRQ", "LED" };
+
+static int am300_wait_event(struct broadsheetfb_par *par)
+{
+ /* todo: improve err recovery */
+ wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
+ return 0;
+}
+
+static int am300_init_gpio_regs(struct broadsheetfb_par *par)
+{
+ int i;
+ int err;
+ char dbname[8];
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ err = gpio_request(gpios[i], gpio_names[i]);
+ if (err) {
+ dev_err(&am300_device->dev, "failed requesting "
+ "gpio %s, err=%d\n", gpio_names[i], err);
+ goto err_req_gpio;
+ }
+ }
+
+ /* we also need to take care of the hdb bus */
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
+ sprintf(dbname, "DB%d", i);
+ err = gpio_request(i, dbname);
+ if (err) {
+ dev_err(&am300_device->dev, "failed requesting "
+ "gpio %d, err=%d\n", i, err);
+ goto err_req_gpio2;
+ }
+ }
+
+ /* setup the outputs and init values */
+ gpio_direction_output(PWR_GPIO_PIN, 0);
+ gpio_direction_output(CFG_GPIO_PIN, 1);
+ gpio_direction_output(DC_GPIO_PIN, 0);
+ gpio_direction_output(RD_GPIO_PIN, 1);
+ gpio_direction_output(WR_GPIO_PIN, 1);
+ gpio_direction_output(CS_GPIO_PIN, 1);
+ gpio_direction_output(RST_GPIO_PIN, 0);
+
+ /* setup the inputs */
+ gpio_direction_input(RDY_GPIO_PIN);
+ gpio_direction_input(IRQ_GPIO_PIN);
+
+ /* start the hdb bus as an input */
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+ gpio_direction_output(i, 0);
+
+ /* go into command mode */
+ gpio_set_value(CFG_GPIO_PIN, 1);
+ gpio_set_value(RST_GPIO_PIN, 0);
+ msleep(10);
+ gpio_set_value(RST_GPIO_PIN, 1);
+ msleep(10);
+ am300_wait_event(par);
+
+ return 0;
+
+err_req_gpio2:
+ while (--i >= DB0_GPIO_PIN)
+ gpio_free(i);
+ i = ARRAY_SIZE(gpios);
+err_req_gpio:
+ while (--i >= 0)
+ gpio_free(gpios[i]);
+
+ return err;
+}
+
+static int am300_init_board(struct broadsheetfb_par *par)
+{
+ return am300_init_gpio_regs(par);
+}
+
+static void am300_cleanup(struct broadsheetfb_par *par)
+{
+ int i;
+
+ free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++)
+ gpio_free(gpios[i]);
+
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+ gpio_free(i);
+
+}
+
+static u16 am300_get_hdb(struct broadsheetfb_par *par)
+{
+ u16 res = 0;
+ int i;
+
+ for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+ res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;
+
+ return res;
+}
+
+static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
+{
+ int i;
+
+ for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+ gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
+}
+
+
+static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
+ u8 state)
+{
+ switch (bit) {
+ case BS_CS:
+ gpio_set_value(CS_GPIO_PIN, state);
+ break;
+ case BS_DC:
+ gpio_set_value(DC_GPIO_PIN, state);
+ break;
+ case BS_WR:
+ gpio_set_value(WR_GPIO_PIN, state);
+ break;
+ }
+}
+
+static int am300_get_panel_type(void)
+{
+ return panel_type;
+}
+
+static irqreturn_t am300_handle_irq(int irq, void *dev_id)
+{
+ struct broadsheetfb_par *par = dev_id;
+
+ wake_up(&par->waitq);
+ return IRQ_HANDLED;
+}
+
+static int am300_setup_irq(struct fb_info *info)
+{
+ int ret;
+ struct broadsheetfb_par *par = info->par;
+
+ ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
+ IRQF_TRIGGER_RISING, "AM300", par);
+ if (ret)
+ dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);
+
+ return ret;
+}
+
+static struct broadsheet_board am300_board = {
+ .owner = THIS_MODULE,
+ .init = am300_init_board,
+ .cleanup = am300_cleanup,
+ .set_hdb = am300_set_hdb,
+ .get_hdb = am300_get_hdb,
+ .set_ctl = am300_set_ctl,
+ .wait_for_rdy = am300_wait_event,
+ .get_panel_type = am300_get_panel_type,
+ .setup_irq = am300_setup_irq,
+};
+
+int __init am300_init(void)
+{
+ int ret;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));
+
+ /* request our platform independent driver */
+ request_module("broadsheetfb");
+
+ am300_device = platform_device_alloc("broadsheetfb", -1);
+ if (!am300_device)
+ return -ENOMEM;
+
+ /* the am300_board that will be seen by broadsheetfb is a copy */
+ platform_device_add_data(am300_device, &am300_board,
+ sizeof(am300_board));
+
+ ret = platform_device_add(am300_device);
+
+ if (ret) {
+ platform_device_put(am300_device);
+ return ret;
+ }
+
+ return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");
+
+MODULE_DESCRIPTION("board driver for am300 epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
new file mode 100644
index 0000000..af46d21
--- /dev/null
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -0,0 +1,828 @@
+/*
+ * linux/arch/arm/mach-pxa/balloon3.c
+ *
+ * Support for Balloonboard.org Balloon3 board.
+ *
+ * Author: Nick Bane, Wookey, Jonathan McDowell
+ * Created: June, 2006
+ * Copyright: Toby Churchill Ltd
+ * Derived from mainstone.c, by Nico Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/ucb1400.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/types.h>
+#include <linux/platform_data/pcf857x.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/physmap.h>
+#include <linux/regulator/max1586.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include "pxa27x.h"
+#include <mach/balloon3.h>
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long balloon3_pin_config[] __initdata = {
+ /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* Reset, configured as GPIO wakeup source */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
+
+/******************************************************************************
+ * Compatibility: Parameter parsing
+ ******************************************************************************/
+static unsigned long balloon3_irq_enabled;
+
+static unsigned long balloon3_features_present =
+ (1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
+ (1 << BALLOON3_FEATURE_AUDIO) |
+ (1 << BALLOON3_FEATURE_TOPPOLY);
+
+int balloon3_has(enum balloon3_features feature)
+{
+ return (balloon3_features_present & (1 << feature)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(balloon3_has);
+
+int __init parse_balloon3_features(char *arg)
+{
+ if (!arg)
+ return 0;
+
+ return kstrtoul(arg, 0, &balloon3_features_present);
+}
+early_param("balloon3_features", parse_balloon3_features);
+
+/******************************************************************************
+ * Compact Flash slot
+ ******************************************************************************/
+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static unsigned long balloon3_cf_pin_config[] __initdata = {
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+};
+
+static void __init balloon3_cf_init(void)
+{
+ if (!balloon3_has(BALLOON3_FEATURE_CF))
+ return;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
+}
+#else
+static inline void balloon3_cf_init(void) {}
+#endif
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition balloon3_nor_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data balloon3_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = balloon3_nor_partitions,
+ .nr_parts = ARRAY_SIZE(balloon3_nor_partitions)
+ }
+};
+
+static struct resource balloon3_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device balloon3_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &balloon3_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = balloon3_flash_data,
+ },
+};
+static void __init balloon3_nor_init(void)
+{
+ platform_device_register(&balloon3_flash);
+}
+#else
+static inline void balloon3_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static unsigned long balloon3_ac97_pin_config[] __initdata = {
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO113_AC97_nRESET,
+ GPIO95_GPIO,
+};
+
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+ .irq = PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
+};
+
+
+static struct platform_device balloon3_ucb1400_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_ucb1400_pdata,
+ },
+};
+
+static void __init balloon3_ts_init(void)
+{
+ if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
+ return;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
+ pxa_set_ac97_info(NULL);
+ platform_device_register(&balloon3_ucb1400_device);
+}
+#else
+static inline void balloon3_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static unsigned long balloon3_lcd_pin_config[] __initdata = {
+ GPIOxx_LCD_TFT_16BPP,
+ GPIO99_GPIO,
+};
+
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+ {
+ .pixclock = 38000,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 8,
+ .vsync_len = 2,
+ .upper_margin = 4,
+ .lower_margin = 5,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info balloon3_lcd_screen = {
+ .modes = balloon3_lcd_modes,
+ .num_modes = ARRAY_SIZE(balloon3_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void balloon3_backlight_power(int on)
+{
+ gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static void __init balloon3_lcd_init(void)
+{
+ int ret;
+
+ if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
+ return;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+
+ ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
+ if (ret) {
+ pr_err("Requesting BKL-ON GPIO failed!\n");
+ goto err;
+ }
+
+ ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+ if (ret) {
+ pr_err("Setting BKL-ON GPIO direction failed!\n");
+ goto err2;
+ }
+
+ balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
+ pxa_set_fb_info(NULL, &balloon3_lcd_screen);
+ return;
+
+err2:
+ gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
+err:
+ return;
+}
+#else
+static inline void balloon3_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static unsigned long balloon3_mmc_pin_config[] __initdata = {
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+};
+
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+ .detect_delay_ms = 200,
+};
+
+static void __init balloon3_mmc_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
+ pxa_set_mci_info(&balloon3_mci_platform_data);
+}
+#else
+static inline void balloon3_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
+static void balloon3_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR &= ~UP2OCR_DPPUE;
+}
+
+static int balloon3_udc_is_connected(void)
+{
+ return 1;
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
+ .udc_command = balloon3_udc_command,
+ .udc_is_connected = balloon3_udc_is_connected,
+ .gpio_pullup = -1,
+};
+
+static void __init balloon3_udc_init(void)
+{
+ pxa_set_udc_info(&balloon3_udc_info);
+}
+#else
+static inline void balloon3_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+ .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
+};
+
+static void __init balloon3_irda_init(void)
+{
+ pxa_set_ficp_info(&balloon3_ficp_platform_data);
+}
+#else
+static inline void balloon3_irda_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static unsigned long balloon3_uhc_pin_config[] __initdata = {
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+};
+
+static struct pxaohci_platform_data balloon3_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init balloon3_uhc_init(void)
+{
+ if (!balloon3_has(BALLOON3_FEATURE_OHCI))
+ return;
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
+ pxa_set_ohci_info(&balloon3_ohci_info);
+}
+#else
+static inline void balloon3_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static unsigned long balloon3_led_pin_config[] __initdata = {
+ GPIO9_GPIO, /* NAND activity LED */
+ GPIO10_GPIO, /* Heartbeat LED */
+};
+
+struct gpio_led balloon3_gpio_leds[] = {
+ {
+ .name = "balloon3:green:idle",
+ .default_trigger = "heartbeat",
+ .gpio = BALLOON3_GPIO_LED_IDLE,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:green:nand",
+ .default_trigger = "nand-disk",
+ .gpio = BALLOON3_GPIO_LED_NAND,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data balloon3_gpio_led_info = {
+ .leds = balloon3_gpio_leds,
+ .num_leds = ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3_leds = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &balloon3_gpio_led_info,
+ }
+};
+
+struct gpio_led balloon3_pcf_gpio_leds[] = {
+ {
+ .name = "balloon3:green:led0",
+ .gpio = BALLOON3_PCF_GPIO_LED0,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:green:led1",
+ .gpio = BALLOON3_PCF_GPIO_LED1,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led2",
+ .gpio = BALLOON3_PCF_GPIO_LED2,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led3",
+ .gpio = BALLOON3_PCF_GPIO_LED3,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led4",
+ .gpio = BALLOON3_PCF_GPIO_LED4,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:orange:led5",
+ .gpio = BALLOON3_PCF_GPIO_LED5,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:red:led6",
+ .gpio = BALLOON3_PCF_GPIO_LED6,
+ .active_low = 1,
+ }, {
+ .name = "balloon3:red:led7",
+ .gpio = BALLOON3_PCF_GPIO_LED7,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
+ .leds = balloon3_pcf_gpio_leds,
+ .num_leds = ARRAY_SIZE(balloon3_pcf_gpio_leds),
+};
+
+static struct platform_device balloon3_pcf_leds = {
+ .name = "leds-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &balloon3_pcf_gpio_led_info,
+ }
+};
+
+static void __init balloon3_leds_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
+ platform_device_register(&balloon3_leds);
+ platform_device_register(&balloon3_pcf_leds);
+}
+#else
+static inline void balloon3_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * FPGA IRQ
+ ******************************************************************************/
+static void balloon3_mask_irq(struct irq_data *d)
+{
+ int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
+ balloon3_irq_enabled &= ~(1 << balloon3_irq);
+ __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static void balloon3_unmask_irq(struct irq_data *d)
+{
+ int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
+ balloon3_irq_enabled |= (1 << balloon3_irq);
+ __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+ .name = "FPGA",
+ .irq_ack = balloon3_mask_irq,
+ .irq_mask = balloon3_mask_irq,
+ .irq_unmask = balloon3_unmask_irq,
+};
+
+static void balloon3_irq_handler(struct irq_desc *desc)
+{
+ unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+ balloon3_irq_enabled;
+ do {
+ struct irq_data *d = irq_desc_get_irq_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ unsigned int irq;
+
+ /* clear useless edge notification */
+ if (chip->irq_ack)
+ chip->irq_ack(d);
+
+ while (pending) {
+ irq = BALLOON3_IRQ(0) + __ffs(pending);
+ generic_handle_irq(irq);
+ pending &= pending - 1;
+ }
+ pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+ balloon3_irq_enabled;
+ } while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+ int irq;
+
+ pxa27x_init_irq();
+ /* setup extra Balloon3 irqs */
+ for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+ irq_set_chip_and_handler(irq, &balloon3_irq_chip,
+ handle_level_irq);
+ irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+ }
+
+ irq_set_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+ irq_set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+ pr_debug("%s: chained handler installed - irq %d automatically "
+ "enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
+static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
+ .gpio_base = BALLOON3_PCF_GPIO_BASE,
+ .n_latch = 0,
+ .setup = NULL,
+ .teardown = NULL,
+ .context = NULL,
+};
+
+static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
+ {
+ I2C_BOARD_INFO("pcf8574a", 0x38),
+ .platform_data = &balloon3_pcf857x_pdata,
+ },
+};
+
+static void __init balloon3_i2c_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
+}
+#else
+static inline void balloon3_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * NAND
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd_to_nand(mtd);
+ uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_CLE)
+ balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
+ else
+ balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
+
+ if (ctrl & NAND_ALE)
+ balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
+ else
+ balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
+
+ if (balloon3_ctl_clr)
+ __raw_writel(balloon3_ctl_clr,
+ BALLOON3_NAND_CONTROL_REG);
+ if (balloon3_ctl_set)
+ __raw_writel(balloon3_ctl_set,
+ BALLOON3_NAND_CONTROL_REG +
+ BALLOON3_FPGA_SETnCLR);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
+}
+
+static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip < 0 || chip > 3)
+ return;
+
+ /* Assert all nCE lines */
+ __raw_writew(
+ BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
+ BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
+
+ /* Deassert correct nCE line */
+ __raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
+ BALLOON3_NAND_CONTROL_REG);
+}
+
+static int balloon3_nand_dev_ready(struct mtd_info *mtd)
+{
+ return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
+}
+
+static int balloon3_nand_probe(struct platform_device *pdev)
+{
+ uint16_t ver;
+ int ret;
+
+ __raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
+ BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR);
+
+ ver = __raw_readw(BALLOON3_FPGA_VER);
+ if (ver < 0x4f08)
+ pr_warn("The FPGA code, version 0x%04x, is too old. "
+ "NAND support might be broken in this version!", ver);
+
+ /* Power up the NAND chips */
+ ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
+ if (ret)
+ goto err1;
+
+ ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
+ if (ret)
+ goto err2;
+
+ gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
+
+ /* Deassert all nCE lines and write protect line */
+ __raw_writel(
+ BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+ BALLOON3_NAND_CONTROL_FLWP,
+ BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
+ return 0;
+
+err2:
+ gpio_free(BALLOON3_GPIO_RUN_NAND);
+err1:
+ return ret;
+}
+
+static void balloon3_nand_remove(struct platform_device *pdev)
+{
+ /* Power down the NAND chips */
+ gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
+ gpio_free(BALLOON3_GPIO_RUN_NAND);
+}
+
+static struct mtd_partition balloon3_partition_info[] = {
+ [0] = {
+ .name = "Boot",
+ .offset = 0,
+ .size = SZ_4M,
+ },
+ [1] = {
+ .name = "RootFS",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+struct platform_nand_data balloon3_nand_pdata = {
+ .chip = {
+ .nr_chips = 4,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(balloon3_partition_info),
+ .partitions = balloon3_partition_info,
+ .chip_delay = 50,
+ },
+ .ctrl = {
+ .dev_ready = balloon3_nand_dev_ready,
+ .select_chip = balloon3_nand_select_chip,
+ .cmd_ctrl = balloon3_nand_cmd_ctl,
+ .probe = balloon3_nand_probe,
+ .remove = balloon3_nand_remove,
+ },
+};
+
+static struct resource balloon3_nand_resource[] = {
+ [0] = {
+ .start = BALLOON3_NAND_BASE,
+ .end = BALLOON3_NAND_BASE + 0x4,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device balloon3_nand = {
+ .name = "gen_nand",
+ .num_resources = ARRAY_SIZE(balloon3_nand_resource),
+ .resource = balloon3_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &balloon3_nand_pdata,
+ }
+};
+
+static void __init balloon3_nand_init(void)
+{
+ platform_device_register(&balloon3_nand);
+}
+#else
+static inline void balloon3_nand_init(void) {}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data balloon3_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = balloon3_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(balloon3_max1587a_consumers),
+};
+
+static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &balloon3_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data balloon3_max1587a_info = {
+ .subdevs = balloon3_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &balloon3_max1587a_info,
+ },
+};
+
+static void __init balloon3_pmic_init(void)
+{
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
+}
+#else
+static inline void balloon3_pmic_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init balloon3_init(void)
+{
+ ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ balloon3_i2c_init();
+ balloon3_irda_init();
+ balloon3_lcd_init();
+ balloon3_leds_init();
+ balloon3_mmc_init();
+ balloon3_nand_init();
+ balloon3_nor_init();
+ balloon3_pmic_init();
+ balloon3_ts_init();
+ balloon3_udc_init();
+ balloon3_uhc_init();
+ balloon3_cf_init();
+}
+
+static struct map_desc balloon3_io_desc[] __initdata = {
+ { /* CPLD/FPGA */
+ .virtual = (unsigned long)BALLOON3_FPGA_VIRT,
+ .pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS),
+ .length = BALLOON3_FPGA_LENGTH,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init balloon3_map_io(void)
+{
+ pxa27x_map_io();
+ iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
+}
+
+MACHINE_START(BALLOON3, "Balloon3")
+ /* Maintainer: Nick Bane. */
+ .map_io = balloon3_map_io,
+ .nr_irqs = BALLOON3_NR_IRQS,
+ .init_irq = balloon3_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = balloon3_init,
+ .atag_offset = 0x100,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
new file mode 100644
index 0000000..1c3cbfc
--- /dev/null
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -0,0 +1,162 @@
+/*
+ * linux/arch/arm/mach-pxa/capc7117.c
+ *
+ * Support for the Embedian CAPC-7117 Evaluation Kit
+ * based on the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ * rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ * Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ * rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa320.h"
+#include "mxm8x10.h"
+
+#include "generic.h"
+
+/* IDE (PATA) Support */
+static struct pata_platform_info pata_platform_data = {
+ .ioport_shift = 1
+};
+
+static struct resource capc7117_ide_resources[] = {
+ [0] = {
+ .start = 0x11000020,
+ .end = 0x1100003f,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = 0x1100001c,
+ .end = 0x1100001c,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
+ }
+};
+
+static struct platform_device capc7117_ide_device = {
+ .name = "pata_platform",
+ .num_resources = ARRAY_SIZE(capc7117_ide_resources),
+ .resource = capc7117_ide_resources,
+ .dev = {
+ .platform_data = &pata_platform_data,
+ .coherent_dma_mask = ~0 /* grumble */
+ }
+};
+
+static void __init capc7117_ide_init(void)
+{
+ platform_device_register(&capc7117_ide_device);
+}
+
+/* TI16C752 UART support */
+#define TI16C752_FLAGS (UPF_BOOT_AUTOCONF | \
+ UPF_IOREMAP | \
+ UPF_BUGGY_UART | \
+ UPF_SKIP_TEST)
+#define TI16C752_UARTCLK (22118400)
+static struct plat_serial8250_port ti16c752_platform_data[] = {
+ [0] = {
+ .mapbase = 0x14000000,
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [1] = {
+ .mapbase = 0x14000040,
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [2] = {
+ .mapbase = 0x14000080,
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [3] = {
+ .mapbase = 0x140000c0,
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [4] = {
+ /* end of array */
+ }
+};
+
+static struct platform_device ti16c752_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = ti16c752_platform_data
+ }
+};
+
+static void __init capc7117_uarts_init(void)
+{
+ platform_device_register(&ti16c752_device);
+}
+
+static void __init capc7117_init(void)
+{
+ /* Init CoM */
+ mxm_8x10_barebones_init();
+
+ /* Init evaluation board peripherals */
+ mxm_8x10_ac97_init();
+ mxm_8x10_usb_host_init();
+ mxm_8x10_mmc_init();
+
+ capc7117_uarts_init();
+ capc7117_ide_init();
+
+ regulator_has_full_constraints();
+}
+
+MACHINE_START(CAPC7117,
+ "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
+ .atag_offset = 0x100,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = capc7117_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
new file mode 100644
index 0000000..fa8e7dd
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -0,0 +1,243 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x255.c
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand-gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include "pxa25x.h"
+
+#include "generic.h"
+
+#define GPIO_NAND_CS (5)
+#define GPIO_NAND_ALE (4)
+#define GPIO_NAND_CLE (3)
+#define GPIO_NAND_RB (10)
+
+static unsigned long cmx255_pin_config[] = {
+ /* AC'97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* SSP2 */
+ GPIO81_SSP2_CLK_OUT,
+ GPIO82_SSP2_FRM_OUT,
+ GPIO83_SSP2_TXD,
+ GPIO84_SSP2_RXD,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* SDRAM and local bus */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+ GPIO18_RDY,
+
+ /* GPIO */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
+ GPIO9_GPIO, /* PC card reset */
+
+ /* NAND controls */
+ GPIO5_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
+ GPIO4_GPIO | MFP_LPM_DRIVE_LOW, /* NAND ALE */
+ GPIO3_GPIO | MFP_LPM_DRIVE_LOW, /* NAND CLE */
+ GPIO10_GPIO, /* NAND Ready/Busy */
+
+ /* interrupts */
+ GPIO22_GPIO, /* DM9000 interrupt */
+};
+
+#if defined(CONFIG_SPI_PXA2XX)
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+ .num_chipselect = 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ [0] = {
+ .modalias = "rtc-max6902",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ },
+};
+
+static void __init cmx255_init_rtc(void)
+{
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+ spi_register_board_info(ARRAY_AND_SIZE(spi_board_info));
+}
+#else
+static inline void cmx255_init_rtc(void) {}
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition cmx255_nor_partitions[] = {
+ {
+ .name = "ARMmon",
+ .size = 0x00030000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ } , {
+ .name = "ARMmon setup block",
+ .size = 0x00010000,
+ .offset = MTDPART_OFS_APPEND,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ } , {
+ .name = "kernel",
+ .size = 0x00160000,
+ .offset = MTDPART_OFS_APPEND,
+ } , {
+ .name = "ramdisk",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND
+ }
+};
+
+static struct physmap_flash_data cmx255_nor_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = cmx255_nor_partitions,
+ .nr_parts = ARRAY_SIZE(cmx255_nor_partitions)
+ }
+};
+
+static struct resource cmx255_nor_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device cmx255_nor = {
+ .name = "physmap-flash",
+ .id = -1,
+ .dev = {
+ .platform_data = cmx255_nor_flash_data,
+ },
+ .resource = &cmx255_nor_resource,
+ .num_resources = 1,
+};
+
+static void __init cmx255_init_nor(void)
+{
+ platform_device_register(&cmx255_nor);
+}
+#else
+static inline void cmx255_init_nor(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+
+static struct gpiod_lookup_table cmx255_nand_gpiod_table = {
+ .dev_id = "gpio-nand",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CS, "nce", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CLE, "cle", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NAND_ALE, "ale", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NAND_RB, "rdy", GPIO_ACTIVE_HIGH),
+ },
+};
+
+static struct resource cmx255_nand_resource[] = {
+ [0] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + 11,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS5_PHYS,
+ .end = PXA_CS5_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition cmx255_nand_parts[] = {
+ [0] = {
+ .name = "cmx255-nand",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
+ },
+};
+
+static struct gpio_nand_platdata cmx255_nand_platdata = {
+ .parts = cmx255_nand_parts,
+ .num_parts = ARRAY_SIZE(cmx255_nand_parts),
+ .chip_delay = 25,
+};
+
+static struct platform_device cmx255_nand = {
+ .name = "gpio-nand",
+ .num_resources = ARRAY_SIZE(cmx255_nand_resource),
+ .resource = cmx255_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &cmx255_nand_platdata,
+ }
+};
+
+static void __init cmx255_init_nand(void)
+{
+ gpiod_add_lookup_table(&cmx255_nand_gpiod_table);
+ platform_device_register(&cmx255_nand);
+}
+#else
+static inline void cmx255_init_nand(void) {}
+#endif
+
+void __init cmx255_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config));
+
+ cmx255_init_rtc();
+ cmx255_init_nor();
+ cmx255_init_nand();
+}
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
new file mode 100644
index 0000000..be4a661
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -0,0 +1,412 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x270.c
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <linux/platform_data/rtc-v3020.h>
+#include <video/mbxfb.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/spi/libertas_spi.h>
+
+#include "pxa27x.h"
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
+
+#include "generic.h"
+
+/* physical address if local-bus attached devices */
+#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
+
+/* GPIO IRQ usage */
+#define GPIO83_MMC_IRQ (83)
+
+#define CMX270_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER (105)
+
+/* WLAN GPIOS */
+#define GPIO19_WLAN_STRAP (19)
+#define GPIO102_WLAN_RST (102)
+
+static unsigned long cmx270_pin_config[] = {
+ /* AC'97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO98_AC97_SYSCLK,
+ GPIO113_AC97_nRESET,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* MCI controller */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* SSP2 */
+ GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
+ GPIO14_GPIO,
+ GPIO87_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* SDRAM and local bus */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+ GPIO49_nPWE,
+ GPIO18_RDY,
+
+ /* GPIO */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
+ GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
+ GPIO53_GPIO, /* PC card reset */
+ GPIO102_GPIO, /* WLAN reset */
+
+ /* NAND controls */
+ GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
+ GPIO89_GPIO, /* NAND Ready/Busy */
+
+ /* interrupts */
+ GPIO10_GPIO, /* DM9000 interrupt */
+ GPIO83_GPIO, /* MMC card detect */
+ GPIO95_GPIO, /* WLAN interrupt */
+};
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+static struct resource cmx270_v3020_resource[] = {
+ [0] = {
+ .start = RTC_PHYS_BASE,
+ .end = RTC_PHYS_BASE + 4,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct v3020_platform_data cmx270_v3020_pdata = {
+ .leftshift = 16,
+};
+
+static struct platform_device cmx270_rtc_device = {
+ .name = "v3020",
+ .num_resources = ARRAY_SIZE(cmx270_v3020_resource),
+ .resource = cmx270_v3020_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &cmx270_v3020_pdata,
+ }
+};
+
+static void __init cmx270_init_rtc(void)
+{
+ platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
+static u64 fb_dma_mask = ~(u64)0;
+
+static struct resource cmx270_2700G_resource[] = {
+ /* frame buffer memory including ODFB and External SDRAM */
+ [0] = {
+ .start = PXA_CS2_PHYS,
+ .end = PXA_CS2_PHYS + 0x01ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+ /* Marathon registers */
+ [1] = {
+ .start = PXA_CS2_PHYS + 0x03fe0000,
+ .end = PXA_CS2_PHYS + 0x03ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static unsigned long cmx270_marathon_on[] = {
+ GPIO58_GPIO,
+ GPIO59_GPIO,
+ GPIO60_GPIO,
+ GPIO61_GPIO,
+ GPIO62_GPIO,
+ GPIO63_GPIO,
+ GPIO64_GPIO,
+ GPIO65_GPIO,
+ GPIO66_GPIO,
+ GPIO67_GPIO,
+ GPIO68_GPIO,
+ GPIO69_GPIO,
+ GPIO70_GPIO,
+ GPIO71_GPIO,
+ GPIO72_GPIO,
+ GPIO73_GPIO,
+ GPIO74_GPIO,
+ GPIO75_GPIO,
+ GPIO76_GPIO,
+ GPIO77_GPIO,
+};
+
+static unsigned long cmx270_marathon_off[] = {
+ GPIOxx_LCD_TFT_16BPP,
+};
+
+static int cmx270_marathon_probe(struct fb_info *fb)
+{
+ int gpio, err;
+
+ for (gpio = 58; gpio <= 77; gpio++) {
+ err = gpio_request(gpio, "LCD");
+ if (err)
+ return err;
+ gpio_direction_input(gpio);
+ }
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
+ return 0;
+}
+
+static int cmx270_marathon_remove(struct fb_info *fb)
+{
+ int gpio;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
+
+ for (gpio = 58; gpio <= 77; gpio++)
+ gpio_free(gpio);
+
+ return 0;
+}
+
+static struct mbxfb_platform_data cmx270_2700G_data = {
+ .xres = {
+ .min = 240,
+ .max = 1200,
+ .defval = 640,
+ },
+ .yres = {
+ .min = 240,
+ .max = 1200,
+ .defval = 480,
+ },
+ .bpp = {
+ .min = 16,
+ .max = 32,
+ .defval = 16,
+ },
+ .memsize = 8*1024*1024,
+ .probe = cmx270_marathon_probe,
+ .remove = cmx270_marathon_remove,
+};
+
+static struct platform_device cmx270_2700G = {
+ .name = "mbx-fb",
+ .dev = {
+ .platform_data = &cmx270_2700G_data,
+ .dma_mask = &fb_dma_mask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(cmx270_2700G_resource),
+ .resource = cmx270_2700G_resource,
+ .id = -1,
+};
+
+static void __init cmx270_init_2700G(void)
+{
+ platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
+
+/* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data cmx270_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+};
+
+static void __init cmx270_init_ohci(void)
+{
+ pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct pxamci_platform_data cmx270_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = GPIO83_MMC_IRQ,
+ .gpio_card_ro = -1,
+ .gpio_power = GPIO105_MMC_POWER,
+ .gpio_power_invert = 1,
+};
+
+static void __init cmx270_init_mmc(void)
+{
+ pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master cm_x270_spi_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .timeout = 1000,
+ .gpio_cs = 14,
+};
+
+static unsigned long cm_x270_libertas_pin_config[] = {
+ /* SSP2 */
+ GPIO19_SSP2_SCLK,
+ GPIO14_GPIO,
+ GPIO87_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+
+};
+
+static int cm_x270_libertas_setup(struct spi_device *spi)
+{
+ int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+ if (err)
+ return err;
+
+ err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
+ if (err)
+ goto err_free_strap;
+
+ err = gpio_direction_output(GPIO102_WLAN_RST, 0);
+ if (err)
+ goto err_free_strap;
+ msleep(100);
+
+ err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+ if (err)
+ goto err_free_strap;
+ msleep(100);
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
+
+ gpio_set_value(GPIO102_WLAN_RST, 1);
+ msleep(100);
+
+ spi->bits_per_word = 16;
+ spi_setup(spi);
+
+ return 0;
+
+err_free_strap:
+ gpio_free(GPIO19_WLAN_STRAP);
+
+ return err;
+}
+
+static int cm_x270_libertas_teardown(struct spi_device *spi)
+{
+ gpio_set_value(GPIO102_WLAN_RST, 0);
+ gpio_free(GPIO102_WLAN_RST);
+ gpio_free(GPIO19_WLAN_STRAP);
+
+ return 0;
+}
+
+struct libertas_spi_platform_data cm_x270_libertas_pdata = {
+ .use_dummy_writes = 1,
+ .setup = cm_x270_libertas_setup,
+ .teardown = cm_x270_libertas_teardown,
+};
+
+static struct spi_board_info cm_x270_spi_devices[] __initdata = {
+ {
+ .modalias = "libertas_spi",
+ .max_speed_hz = 13000000,
+ .bus_num = 2,
+ .irq = PXA_GPIO_TO_IRQ(95),
+ .chip_select = 0,
+ .controller_data = &cm_x270_libertas_chip,
+ .platform_data = &cm_x270_libertas_pdata,
+ },
+};
+
+static void __init cmx270_init_spi(void)
+{
+ pxa2xx_set_spi_info(2, &cm_x270_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
+}
+#else
+static inline void cmx270_init_spi(void) {}
+#endif
+
+void __init cmx270_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+#ifdef CONFIG_PM
+ pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
+ cmx270_init_rtc();
+ cmx270_init_mmc();
+ cmx270_init_ohci();
+ cmx270_init_2700G();
+ cmx270_init_spi();
+}
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
new file mode 100644
index 0000000..3221ae1
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -0,0 +1,199 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x2xx-pci.c
+ *
+ * PCI bios-type initialisation for PCI machines
+ *
+ * Bits taken from various places.
+ *
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+#include <asm/hardware/it8152.h>
+
+void __iomem *it8152_base_address;
+static int cmx2xx_it8152_irq_gpio;
+
+static void cmx2xx_it8152_irq_demux(struct irq_desc *desc)
+{
+ /* clear our parent irq */
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+
+ it8152_irq_demux(desc);
+}
+
+void __cmx2xx_pci_init_irq(int irq_gpio)
+{
+ it8152_init_irq();
+
+ cmx2xx_it8152_irq_gpio = irq_gpio;
+
+ irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
+
+ irq_set_chained_handler(gpio_to_irq(irq_gpio),
+ cmx2xx_it8152_irq_demux);
+}
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_ite[10];
+
+void __cmx2xx_pci_suspend(void)
+{
+ /* save ITE state */
+ sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
+ sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR);
+ sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR);
+
+ /* Clear ITE IRQ's */
+ __raw_writel((0), IT8152_INTC_PDCNIRR);
+ __raw_writel((0), IT8152_INTC_LPCNIRR);
+}
+
+void __cmx2xx_pci_resume(void)
+{
+ /* restore IT8152 state */
+ __raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
+ __raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR);
+ __raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
+}
+#else
+void cmx2xx_pci_suspend(void) {}
+void cmx2xx_pci_resume(void) {}
+#endif
+
+/* PCI IRQ mapping*/
+static int __init cmx2xx_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin);
+
+ irq = it8152_pci_map_irq(dev, slot, pin);
+ if (irq)
+ return irq;
+
+ /*
+ Here comes the ugly part. The routing is baseboard specific,
+ but defining a platform for each possible base of CM-X2XX is
+ unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
+ */
+ /* ATXBASE PCI slot */
+ if (slot == 7)
+ return IT8152_PCI_INTA;
+
+ /* ATXBase/SB-X2XX CardBus */
+ if (slot == 8 || slot == 0)
+ return IT8152_PCI_INTB;
+
+ /* ATXBase Ethernet */
+ if (slot == 9)
+ return IT8152_PCI_INTA;
+
+ /* CM-x255 Onboard Ethernet */
+ if (slot == 15)
+ return IT8152_PCI_INTC;
+
+ /* SB-x2xx Ethernet */
+ if (slot == 16)
+ return IT8152_PCI_INTA;
+
+ /* PC104+ interrupt routing */
+ if ((slot == 17) || (slot == 19))
+ return IT8152_PCI_INTA;
+ if ((slot == 18) || (slot == 20))
+ return IT8152_PCI_INTB;
+
+ return(0);
+}
+
+static void cmx2xx_pci_preinit(void)
+{
+ pr_info("Initializing CM-X2XX PCI subsystem\n");
+
+ pcibios_min_io = 0;
+ pcibios_min_mem = 0;
+
+ __raw_writel(0x800, IT8152_PCI_CFG_ADDR);
+ if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
+ pr_info("PCI Bridge found.\n");
+
+ /* set PCI I/O base at 0 */
+ writel(0x848, IT8152_PCI_CFG_ADDR);
+ writel(0, IT8152_PCI_CFG_DATA);
+
+ /* set PCI memory base at 0 */
+ writel(0x840, IT8152_PCI_CFG_ADDR);
+ writel(0, IT8152_PCI_CFG_DATA);
+
+ writel(0x20, IT8152_GPIO_GPDR);
+
+ /* CardBus Controller on ATXbase baseboard */
+ writel(0x4000, IT8152_PCI_CFG_ADDR);
+ if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
+ pr_info("CardBus Bridge found.\n");
+
+ /* Configure socket 0 */
+ writel(0x408C, IT8152_PCI_CFG_ADDR);
+ writel(0x1022, IT8152_PCI_CFG_DATA);
+
+ writel(0x4080, IT8152_PCI_CFG_ADDR);
+ writel(0x3844d060, IT8152_PCI_CFG_DATA);
+
+ writel(0x4090, IT8152_PCI_CFG_ADDR);
+ writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
+ 0x60440000),
+ IT8152_PCI_CFG_DATA);
+
+ writel(0x4018, IT8152_PCI_CFG_ADDR);
+ writel(0xb0000000, IT8152_PCI_CFG_DATA);
+
+ /* Configure socket 1 */
+ writel(0x418C, IT8152_PCI_CFG_ADDR);
+ writel(0x1022, IT8152_PCI_CFG_DATA);
+
+ writel(0x4180, IT8152_PCI_CFG_ADDR);
+ writel(0x3844d060, IT8152_PCI_CFG_DATA);
+
+ writel(0x4190, IT8152_PCI_CFG_ADDR);
+ writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
+ 0x60440000),
+ IT8152_PCI_CFG_DATA);
+
+ writel(0x4118, IT8152_PCI_CFG_ADDR);
+ writel(0xb0000000, IT8152_PCI_CFG_DATA);
+ }
+ }
+}
+
+static struct hw_pci cmx2xx_pci __initdata = {
+ .map_irq = cmx2xx_pci_map_irq,
+ .nr_controllers = 1,
+ .ops = &it8152_ops,
+ .setup = it8152_pci_setup,
+ .preinit = cmx2xx_pci_preinit,
+};
+
+static int __init cmx2xx_init_pci(void)
+{
+ if (machine_is_armcore())
+ pci_common_init(&cmx2xx_pci);
+
+ return 0;
+}
+
+subsys_initcall(cmx2xx_init_pci);
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.h b/arch/arm/mach-pxa/cm-x2xx-pci.h
new file mode 100644
index 0000000..93ffaae
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+extern void __cmx2xx_pci_init_irq(int irq_gpio);
+extern void __cmx2xx_pci_suspend(void);
+extern void __cmx2xx_pci_resume(void);
+
+#ifdef CONFIG_PCI
+#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x)
+#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x)
+#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x)
+#else
+#define cmx2xx_pci_init_irq(x) do {} while (0)
+#define cmx2xx_pci_suspend(x) do {} while (0)
+#define cmx2xx_pci_resume(x) do {} while (0)
+#endif
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
new file mode 100644
index 0000000..7202022
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -0,0 +1,541 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x2xx.c
+ *
+ * Copyright (C) 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include "pxa25x.h"
+#undef GPIO24_SSP1_SFRM
+#undef GPIO86_GPIO
+#undef GPIO87_GPIO
+#undef GPIO88_GPIO
+#undef GPIO89_GPIO
+#include "pxa27x.h"
+#undef GPIO24_SSP1_SFRM
+#undef GPIO86_GPIO
+#undef GPIO87_GPIO
+#undef GPIO88_GPIO
+#undef GPIO89_GPIO
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <mach/smemc.h>
+
+#include <asm/hardware/it8152.h>
+
+#include "generic.h"
+#include "cm-x2xx-pci.h"
+
+extern void cmx255_init(void);
+extern void cmx270_init(void);
+
+/* reserve IRQs for IT8152 */
+#define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40)
+
+/* virtual addresses for statically mapped regions */
+#define CMX2XX_VIRT_BASE (void __iomem *)(0xe8000000)
+#define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE)
+
+/* physical address if local-bus attached devices */
+#define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22))
+#define CMX270_DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
+
+/* leds */
+#define CMX255_GPIO_RED (27)
+#define CMX255_GPIO_GREEN (32)
+#define CMX270_GPIO_RED (93)
+#define CMX270_GPIO_GREEN (94)
+
+/* GPIO IRQ usage */
+#define GPIO22_ETHIRQ (22)
+#define GPIO10_ETHIRQ (10)
+#define CMX255_GPIO_IT8152_IRQ (0)
+#define CMX270_GPIO_IT8152_IRQ (22)
+
+#define CMX255_ETHIRQ PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ)
+#define CMX270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ)
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx255_dm9000_resource[] = {
+ [0] = {
+ .start = CMX255_DM9000_PHYS_BASE,
+ .end = CMX255_DM9000_PHYS_BASE + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CMX255_DM9000_PHYS_BASE + 4,
+ .end = CMX255_DM9000_PHYS_BASE + 4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = CMX255_ETHIRQ,
+ .end = CMX255_ETHIRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct resource cmx270_dm9000_resource[] = {
+ [0] = {
+ .start = CMX270_DM9000_PHYS_BASE,
+ .end = CMX270_DM9000_PHYS_BASE + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CMX270_DM9000_PHYS_BASE + 8,
+ .end = CMX270_DM9000_PHYS_BASE + 8 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = CMX270_ETHIRQ,
+ .end = CMX270_ETHIRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
+ .flags = DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM,
+};
+
+static struct platform_device cmx2xx_dm9000_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(cmx270_dm9000_resource),
+ .dev = {
+ .platform_data = &cmx270_dm9000_platdata,
+ }
+};
+
+static void __init cmx2xx_init_dm9000(void)
+{
+ if (cpu_is_pxa25x())
+ cmx2xx_dm9000_device.resource = cmx255_dm9000_resource;
+ else
+ cmx2xx_dm9000_device.resource = cmx270_dm9000_resource;
+ platform_device_register(&cmx2xx_dm9000_device);
+}
+#else
+static inline void cmx2xx_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device cmx2xx_ts_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+};
+
+static void __init cmx2xx_init_touchscreen(void)
+{
+ platform_device_register(&cmx2xx_ts_device);
+}
+#else
+static inline void cmx2xx_init_touchscreen(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx2xx_leds[] = {
+ [0] = {
+ .name = "cm-x2xx:red",
+ .default_trigger = "nand-disk",
+ .active_low = 1,
+ },
+ [1] = {
+ .name = "cm-x2xx:green",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = {
+ .num_leds = ARRAY_SIZE(cmx2xx_leds),
+ .leds = cmx2xx_leds,
+};
+
+static struct platform_device cmx2xx_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &cmx2xx_gpio_led_pdata,
+ },
+};
+
+static void __init cmx2xx_init_leds(void)
+{
+ if (cpu_is_pxa25x()) {
+ cmx2xx_leds[0].gpio = CMX255_GPIO_RED;
+ cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN;
+ } else {
+ cmx2xx_leds[0].gpio = CMX270_GPIO_RED;
+ cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN;
+ }
+ platform_device_register(&cmx2xx_led_device);
+}
+#else
+static inline void cmx2xx_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+/*
+ Display definitions
+ keep these for backwards compatibility, although symbolic names (as
+ e.g. in lpd270.c) looks better
+*/
+#define MTYPE_STN320x240 0
+#define MTYPE_TFT640x480 1
+#define MTYPE_CRT640x480 2
+#define MTYPE_CRT800x600 3
+#define MTYPE_TFT320x240 6
+#define MTYPE_STN640x480 7
+
+static struct pxafb_mode_info generic_stn_320x240_mode = {
+ .pixclock = 76923,
+ .bpp = 8,
+ .xres = 320,
+ .yres = 240,
+ .hsync_len = 3,
+ .vsync_len = 2,
+ .left_margin = 3,
+ .upper_margin = 0,
+ .right_margin = 3,
+ .lower_margin = 0,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_320x240 = {
+ .modes = &generic_stn_320x240_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_STN_8BPP | LCD_PCLK_EDGE_FALL |\
+ LCD_AC_BIAS_FREQ(0xff),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_tft_640x480_mode = {
+ .pixclock = 38461,
+ .bpp = 8,
+ .xres = 640,
+ .yres = 480,
+ .hsync_len = 60,
+ .vsync_len = 2,
+ .left_margin = 70,
+ .upper_margin = 10,
+ .right_margin = 70,
+ .lower_margin = 5,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_640x480 = {
+ .modes = &generic_tft_640x480_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_8BPP | LCD_PCLK_EDGE_FALL |\
+ LCD_AC_BIAS_FREQ(0xff),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_crt_640x480_mode = {
+ .pixclock = 38461,
+ .bpp = 8,
+ .xres = 640,
+ .yres = 480,
+ .hsync_len = 63,
+ .vsync_len = 2,
+ .left_margin = 81,
+ .upper_margin = 33,
+ .right_margin = 16,
+ .lower_margin = 10,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_640x480 = {
+ .modes = &generic_crt_640x480_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_crt_800x600_mode = {
+ .pixclock = 28846,
+ .bpp = 8,
+ .xres = 800,
+ .yres = 600,
+ .hsync_len = 63,
+ .vsync_len = 2,
+ .left_margin = 26,
+ .upper_margin = 21,
+ .right_margin = 26,
+ .lower_margin = 11,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_800x600 = {
+ .modes = &generic_crt_800x600_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_tft_320x240_mode = {
+ .pixclock = 134615,
+ .bpp = 16,
+ .xres = 320,
+ .yres = 240,
+ .hsync_len = 63,
+ .vsync_len = 7,
+ .left_margin = 75,
+ .upper_margin = 0,
+ .right_margin = 15,
+ .lower_margin = 15,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_320x240 = {
+ .modes = &generic_tft_320x240_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_AC_BIAS_FREQ(0xff),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_stn_640x480_mode = {
+ .pixclock = 57692,
+ .bpp = 8,
+ .xres = 640,
+ .yres = 480,
+ .hsync_len = 4,
+ .vsync_len = 2,
+ .left_margin = 10,
+ .upper_margin = 5,
+ .right_margin = 10,
+ .lower_margin = 5,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_640x480 = {
+ .modes = &generic_stn_640x480_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_STN_8BPP | LCD_AC_BIAS_FREQ(0xff),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480;
+
+static int __init cmx2xx_set_display(char *str)
+{
+ int disp_type = simple_strtol(str, NULL, 0);
+ switch (disp_type) {
+ case MTYPE_STN320x240:
+ cmx2xx_display = &generic_stn_320x240;
+ break;
+ case MTYPE_TFT640x480:
+ cmx2xx_display = &generic_tft_640x480;
+ break;
+ case MTYPE_CRT640x480:
+ cmx2xx_display = &generic_crt_640x480;
+ break;
+ case MTYPE_CRT800x600:
+ cmx2xx_display = &generic_crt_800x600;
+ break;
+ case MTYPE_TFT320x240:
+ cmx2xx_display = &generic_tft_320x240;
+ break;
+ case MTYPE_STN640x480:
+ cmx2xx_display = &generic_stn_640x480;
+ break;
+ default: /* fallback to CRT 640x480 */
+ cmx2xx_display = &generic_crt_640x480;
+ break;
+ }
+ return 1;
+}
+
+/*
+ This should be done really early to get proper configuration for
+ frame buffer.
+ Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader
+ has limitied line length for kernel command line, and also it will
+ break compatibitlty with proprietary releases already in field.
+*/
+__setup("monitor=", cmx2xx_set_display);
+
+static void __init cmx2xx_init_display(void)
+{
+ pxa_set_fb_info(NULL, cmx2xx_display);
+}
+#else
+static inline void cmx2xx_init_display(void) {}
+#endif
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_msc[10];
+
+static int cmx2xx_suspend(void)
+{
+ cmx2xx_pci_suspend();
+
+ /* save MSC registers */
+ sleep_save_msc[0] = __raw_readl(MSC0);
+ sleep_save_msc[1] = __raw_readl(MSC1);
+ sleep_save_msc[2] = __raw_readl(MSC2);
+
+ /* setup power saving mode registers */
+ PCFR = 0x0;
+ PSLR = 0xff400000;
+ PMCR = 0x00000005;
+ PWER = 0x80000000;
+ PFER = 0x00000000;
+ PRER = 0x00000000;
+ PGSR0 = 0xC0018800;
+ PGSR1 = 0x004F0002;
+ PGSR2 = 0x6021C000;
+ PGSR3 = 0x00020000;
+
+ return 0;
+}
+
+static void cmx2xx_resume(void)
+{
+ cmx2xx_pci_resume();
+
+ /* restore MSC registers */
+ __raw_writel(sleep_save_msc[0], MSC0);
+ __raw_writel(sleep_save_msc[1], MSC1);
+ __raw_writel(sleep_save_msc[2], MSC2);
+}
+
+static struct syscore_ops cmx2xx_pm_syscore_ops = {
+ .resume = cmx2xx_resume,
+ .suspend = cmx2xx_suspend,
+};
+
+static int __init cmx2xx_pm_init(void)
+{
+ register_syscore_ops(&cmx2xx_pm_syscore_ops);
+
+ return 0;
+}
+#else
+static int __init cmx2xx_pm_init(void) { return 0; }
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx2xx_init_ac97(void)
+{
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx2xx_init_ac97(void) {}
+#endif
+
+static void __init cmx2xx_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ cmx2xx_pm_init();
+
+ if (cpu_is_pxa25x())
+ cmx255_init();
+ else
+ cmx270_init();
+
+ cmx2xx_init_dm9000();
+ cmx2xx_init_display();
+ cmx2xx_init_ac97();
+ cmx2xx_init_touchscreen();
+ cmx2xx_init_leds();
+
+ regulator_has_full_constraints();
+}
+
+static void __init cmx2xx_init_irq(void)
+{
+ if (cpu_is_pxa25x()) {
+ pxa25x_init_irq();
+ cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
+ } else {
+ pxa27x_init_irq();
+ cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ);
+ }
+}
+
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx2xx_io_desc[] __initdata = {
+ [0] = { /* PCI bridge */
+ .virtual = (unsigned long)CMX2XX_IT8152_VIRT,
+ .pfn = __phys_to_pfn(PXA_CS4_PHYS),
+ .length = SZ_64M,
+ .type = MT_DEVICE
+ },
+};
+
+static void __init cmx2xx_map_io(void)
+{
+ if (cpu_is_pxa25x())
+ pxa25x_map_io();
+
+ if (cpu_is_pxa27x())
+ pxa27x_map_io();
+
+ iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
+
+ it8152_base_address = CMX2XX_IT8152_VIRT;
+}
+#else
+static void __init cmx2xx_map_io(void)
+{
+ if (cpu_is_pxa25x())
+ pxa25x_map_io();
+
+ if (cpu_is_pxa27x())
+ pxa27x_map_io();
+}
+#endif
+
+MACHINE_START(ARMCORE, "Compulab CM-X2XX")
+ .atag_offset = 0x100,
+ .map_io = cmx2xx_map_io,
+ .nr_irqs = CMX2XX_NR_IRQS,
+ .init_irq = cmx2xx_init_irq,
+ /* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */
+ .handle_irq = pxa25x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = cmx2xx_init,
+#ifdef CONFIG_PCI
+ .dma_zone_size = SZ_64M,
+#endif
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
new file mode 100644
index 0000000..c5c0ab8
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -0,0 +1,879 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x300.c
+ *
+ * Support for the CompuLab CM-X300 modules
+ *
+ * Copyright (C) 2008,2009 CompuLab Ltd.
+ *
+ * Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+#include <linux/platform_data/rtc-v3020.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+
+#include <linux/i2c.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/tdo24m.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include <asm/system_info.h>
+
+#include "pxa300.h"
+#include "pxa27x-udc.h"
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+#include <mach/audio.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+
+#include <asm/mach/map.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#define CM_X300_ETH_PHYS 0x08000010
+
+#define GPIO82_MMC_IRQ (82)
+#define GPIO85_MMC_WP (85)
+
+#define CM_X300_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
+
+#define GPIO95_RTC_CS (95)
+#define GPIO96_RTC_WR (96)
+#define GPIO97_RTC_RD (97)
+#define GPIO98_RTC_IO (98)
+
+#define GPIO_ULPI_PHY_RST (127)
+
+static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+
+ /* BTUART */
+ GPIO111_UART2_RTS,
+ GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
+ GPIO113_UART2_TXD,
+ GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
+
+ /* STUART */
+ GPIO109_UART3_TXD,
+ GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
+
+ /* AC97 */
+ GPIO23_AC97_nACRESET,
+ GPIO24_AC97_SYSCLK,
+ GPIO29_AC97_BITCLK,
+ GPIO25_AC97_SDATA_IN_0,
+ GPIO27_AC97_SDATA_OUT,
+ GPIO28_AC97_SYNC,
+
+ /* Keypad */
+ GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+ GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+ GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+ GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+ GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+ GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
+ GPIO121_KP_MKOUT_0,
+ GPIO122_KP_MKOUT_1,
+ GPIO123_KP_MKOUT_2,
+ GPIO124_KP_MKOUT_3,
+ GPIO125_KP_MKOUT_4,
+ GPIO4_2_KP_MKOUT_5,
+
+ /* MMC1 */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD, /* CMD0 for slot 0 */
+
+ /* MMC2 */
+ GPIO9_MMC2_DAT0,
+ GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO11_MMC2_DAT2,
+ GPIO12_MMC2_DAT3,
+ GPIO13_MMC2_CLK,
+ GPIO14_MMC2_CMD,
+
+ /* FFUART */
+ GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
+ GPIO31_UART1_TXD,
+ GPIO32_UART1_CTS,
+ GPIO37_UART1_RTS,
+ GPIO33_UART1_DCD,
+ GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
+ GPIO35_UART1_RI,
+ GPIO36_UART1_DTR,
+
+ /* GPIOs */
+ GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
+ GPIO85_GPIO, /* MMC WP */
+ GPIO99_GPIO, /* Ethernet IRQ */
+
+ /* RTC GPIOs */
+ GPIO95_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC CS */
+ GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC WR */
+ GPIO97_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC RD */
+ GPIO98_GPIO, /* RTC IO */
+
+ /* Standard I2C */
+ GPIO21_I2C_SCL,
+ GPIO22_I2C_SDA,
+
+ /* PWM Backlight */
+ GPIO19_PWM2_OUT,
+};
+
+static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
+ /* GPIOs */
+ GPIO79_GPIO, /* LED */
+ GPIO77_GPIO, /* WiFi reset */
+ GPIO78_GPIO, /* BT reset */
+};
+
+static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
+ /* GPIOs */
+ GPIO76_GPIO, /* LED */
+ GPIO71_GPIO, /* WiFi reset */
+ GPIO70_GPIO, /* BT reset */
+};
+
+static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
+ /* USB PORT 2 */
+ ULPI_STP,
+ ULPI_NXT,
+ ULPI_DIR,
+ GPIO30_ULPI_DATA_OUT_0,
+ GPIO31_ULPI_DATA_OUT_1,
+ GPIO32_ULPI_DATA_OUT_2,
+ GPIO33_ULPI_DATA_OUT_3,
+ GPIO34_ULPI_DATA_OUT_4,
+ GPIO35_ULPI_DATA_OUT_5,
+ GPIO36_ULPI_DATA_OUT_6,
+ GPIO37_ULPI_DATA_OUT_7,
+ GPIO38_ULPI_CLK,
+ /* external PHY reset pin */
+ GPIO127_GPIO,
+
+ /* USB PORT 3 */
+ GPIO77_USB_P3_1,
+ GPIO78_USB_P3_2,
+ GPIO79_USB_P3_3,
+ GPIO80_USB_P3_4,
+ GPIO81_USB_P3_5,
+ GPIO82_USB_P3_6,
+ GPIO0_2_USBH_PEN,
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = CM_X300_ETH_PHYS,
+ .end = CM_X300_ETH_PHYS + 0x3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CM_X300_ETH_PHYS + 0x4,
+ .end = CM_X300_ETH_PHYS + 0x4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct dm9000_plat_data cm_x300_dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+ .dev = {
+ .platform_data = &cm_x300_dm9000_platdata,
+ }
+
+};
+
+static void __init cm_x300_init_dm9000(void)
+{
+ platform_device_register(&dm9000_device);
+}
+#else
+static inline void cm_x300_init_dm9000(void) {}
+#endif
+
+/* LCD */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info cm_x300_lcd_modes[] = {
+ [0] = {
+ .pixclock = 38250,
+ .bpp = 16,
+ .xres = 480,
+ .yres = 640,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 24,
+ .lower_margin = 4,
+ .cmap_greyscale = 0,
+ },
+ [1] = {
+ .pixclock = 153800,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 88,
+ .lower_margin = 2,
+ .cmap_greyscale = 0,
+ },
+};
+
+static struct pxafb_mach_info cm_x300_lcd = {
+ .modes = cm_x300_lcd_modes,
+ .num_modes = ARRAY_SIZE(cm_x300_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init cm_x300_init_lcd(void)
+{
+ pxa_set_fb_info(NULL, &cm_x300_lcd);
+}
+#else
+static inline void cm_x300_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup cm_x300_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data cm_x300_backlight_data = {
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .enable_gpio = -1,
+};
+
+static struct platform_device cm_x300_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &cm_x300_backlight_data,
+ },
+};
+
+static void cm_x300_init_bl(void)
+{
+ pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
+ platform_device_register(&cm_x300_backlight_device);
+}
+#else
+static inline void cm_x300_init_bl(void) {}
+#endif
+
+#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
+#define GPIO_LCD_BASE (144)
+#define GPIO_LCD_DIN (GPIO_LCD_BASE + 8) /* aux_gpio3_0 */
+#define GPIO_LCD_DOUT (GPIO_LCD_BASE + 9) /* aux_gpio3_1 */
+#define GPIO_LCD_SCL (GPIO_LCD_BASE + 10) /* aux_gpio3_2 */
+#define GPIO_LCD_CS (GPIO_LCD_BASE + 11) /* aux_gpio3_3 */
+#define LCD_SPI_BUS_NUM (1)
+
+static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
+ .num_chipselect = 1,
+};
+
+static struct platform_device cm_x300_spi_gpio = {
+ .name = "spi_gpio",
+ .id = LCD_SPI_BUS_NUM,
+ .dev = {
+ .platform_data = &cm_x300_spi_gpio_pdata,
+ },
+};
+
+static struct gpiod_lookup_table cm_x300_spi_gpiod_table = {
+ .dev_id = "spi_gpio",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_LCD_SCL,
+ "sck", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DIN,
+ "mosi", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DOUT,
+ "miso", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_LCD_CS,
+ "cs", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
+ .model = TDO35S,
+};
+
+static struct spi_board_info cm_x300_spi_devices[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = LCD_SPI_BUS_NUM,
+ .chip_select = 0,
+ .platform_data = &cm_x300_tdo24m_pdata,
+ },
+};
+
+static void __init cm_x300_init_spi(void)
+{
+ spi_register_board_info(cm_x300_spi_devices,
+ ARRAY_SIZE(cm_x300_spi_devices));
+ gpiod_add_lookup_table(&cm_x300_spi_gpiod_table);
+ platform_device_register(&cm_x300_spi_gpio);
+}
+#else
+static inline void cm_x300_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static void __init cm_x300_init_ac97(void)
+{
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cm_x300_init_ac97(void) {}
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
+static struct mtd_partition cm_x300_nand_partitions[] = {
+ [0] = {
+ .name = "OBM",
+ .offset = 0,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [1] = {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [2] = {
+ .name = "Environment",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ },
+ [3] = {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K + SZ_1M,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [4] = {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ },
+ [5] = {
+ .name = "fs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
+ .keep_config = 1,
+ .parts = cm_x300_nand_partitions,
+ .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
+};
+
+static void __init cm_x300_init_nand(void)
+{
+ pxa3xx_set_nand_info(&cm_x300_nand_info);
+}
+#else
+static inline void cm_x300_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+ .detect_delay_ms = 200,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = GPIO82_MMC_IRQ,
+ .gpio_card_ro = GPIO85_MMC_WP,
+ .gpio_power = -1,
+};
+
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
+ no detection/ro pins */
+static int cm_x300_mci2_init(struct device *dev,
+ irq_handler_t cm_x300_detect_int,
+ void *data)
+{
+ return 0;
+}
+
+static void cm_x300_mci2_exit(struct device *dev, void *data)
+{
+}
+
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
+ .detect_delay_ms = 200,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = cm_x300_mci2_init,
+ .exit = cm_x300_mci2_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+static void __init cm_x300_init_mmc(void)
+{
+ pxa_set_mci_info(&cm_x300_mci_platform_data);
+ pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
+}
+#else
+static inline void cm_x300_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_PXA310_ULPI)
+static struct clk *pout_clk;
+
+static int cm_x300_ulpi_phy_reset(void)
+{
+ int err;
+
+ /* reset the PHY */
+ err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
+ "ulpi reset");
+ if (err) {
+ pr_err("failed to request ULPI reset GPIO: %d\n", err);
+ return err;
+ }
+
+ msleep(10);
+ gpio_set_value(GPIO_ULPI_PHY_RST, 1);
+ msleep(10);
+
+ gpio_free(GPIO_ULPI_PHY_RST);
+
+ return 0;
+}
+
+static int cm_x300_u2d_init(struct device *dev)
+{
+ int err = 0;
+
+ if (cpu_is_pxa310()) {
+ /* CLK_POUT is connected to the ULPI PHY */
+ pout_clk = clk_get(NULL, "CLK_POUT");
+ if (IS_ERR(pout_clk)) {
+ err = PTR_ERR(pout_clk);
+ pr_err("failed to get CLK_POUT: %d\n", err);
+ return err;
+ }
+ clk_prepare_enable(pout_clk);
+
+ err = cm_x300_ulpi_phy_reset();
+ if (err) {
+ clk_disable(pout_clk);
+ clk_put(pout_clk);
+ }
+ }
+
+ return err;
+}
+
+static void cm_x300_u2d_exit(struct device *dev)
+{
+ if (cpu_is_pxa310()) {
+ clk_disable_unprepare(pout_clk);
+ clk_put(pout_clk);
+ }
+}
+
+static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
+ .ulpi_mode = ULPI_SER_6PIN,
+ .init = cm_x300_u2d_init,
+ .exit = cm_x300_u2d_exit,
+};
+
+static void cm_x300_init_u2d(void)
+{
+ pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
+}
+#else
+static inline void cm_x300_init_u2d(void) {}
+#endif
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int cm_x300_ohci_init(struct device *dev)
+{
+ if (cpu_is_pxa300())
+ UP2OCR = UP2OCR_HXS
+ | UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+ return 0;
+}
+
+static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW,
+ .init = cm_x300_ohci_init,
+};
+
+static void __init cm_x300_init_ohci(void)
+{
+ pxa_set_ohci_info(&cm_x300_ohci_platform_data);
+}
+#else
+static inline void cm_x300_init_ohci(void) {}
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cm_x300_leds[] = {
+ [0] = {
+ .name = "cm-x300:green",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
+ .num_leds = ARRAY_SIZE(cm_x300_leds),
+ .leds = cm_x300_leds,
+};
+
+static struct platform_device cm_x300_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &cm_x300_gpio_led_pdata,
+ },
+};
+
+static void __init cm_x300_init_leds(void)
+{
+ if (system_rev < 130)
+ cm_x300_leds[0].gpio = 79;
+ else
+ cm_x300_leds[0].gpio = 76;
+
+ platform_device_register(&cm_x300_led_device);
+}
+#else
+static inline void cm_x300_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+/* PCA9555 */
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
+ .gpio_base = 128,
+};
+
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
+ .gpio_base = 144,
+};
+
+static struct i2c_board_info cm_x300_gpio_ext_info[] = {
+ [0] = {
+ I2C_BOARD_INFO("pca9555", 0x24),
+ .platform_data = &cm_x300_gpio_ext_pdata_0,
+ },
+ [1] = {
+ I2C_BOARD_INFO("pca9555", 0x25),
+ .platform_data = &cm_x300_gpio_ext_pdata_1,
+ },
+};
+
+static void __init cm_x300_init_i2c(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, cm_x300_gpio_ext_info,
+ ARRAY_SIZE(cm_x300_gpio_ext_info));
+}
+#else
+static inline void cm_x300_init_i2c(void) {}
+#endif
+
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+struct v3020_platform_data cm_x300_v3020_pdata = {
+ .use_gpio = 1,
+ .gpio_cs = GPIO95_RTC_CS,
+ .gpio_wr = GPIO96_RTC_WR,
+ .gpio_rd = GPIO97_RTC_RD,
+ .gpio_io = GPIO98_RTC_IO,
+};
+
+static struct platform_device cm_x300_rtc_device = {
+ .name = "v3020",
+ .id = -1,
+ .dev = {
+ .platform_data = &cm_x300_v3020_pdata,
+ }
+};
+
+static void __init cm_x300_init_rtc(void)
+{
+ platform_device_register(&cm_x300_rtc_device);
+}
+#else
+static inline void cm_x300_init_rtc(void) {}
+#endif
+
+/* Battery */
+struct power_supply_info cm_x300_psy_info = {
+ .name = "battery",
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .voltage_max_design = 4200000,
+ .voltage_min_design = 3000000,
+ .use_for_apm = 1,
+};
+
+static void cm_x300_battery_low(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+ apm_queue_event(APM_LOW_BATTERY);
+#endif
+}
+
+static void cm_x300_battery_critical(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+#endif
+}
+
+struct da9030_battery_info cm_x300_battery_info = {
+ .battery_info = &cm_x300_psy_info,
+
+ .charge_milliamp = 1000,
+ .charge_millivolt = 4200,
+
+ .vbat_low = 3600,
+ .vbat_crit = 3400,
+ .vbat_charge_start = 4100,
+ .vbat_charge_stop = 4200,
+ .vbat_charge_restart = 4000,
+
+ .vcharge_min = 3200,
+ .vcharge_max = 5500,
+
+ .tbat_low = 197,
+ .tbat_high = 78,
+ .tbat_restart = 100,
+
+ .batmon_interval = 0,
+
+ .battery_low = cm_x300_battery_low,
+ .battery_critical = cm_x300_battery_critical,
+};
+
+static struct regulator_consumer_supply buck2_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data buck2_data = {
+ .constraints = {
+ .min_uV = 1375000,
+ .max_uV = 1375000,
+ .state_mem = {
+ .enabled = 0,
+ },
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .apply_uV = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck2_consumers),
+ .consumer_supplies = buck2_consumers,
+};
+
+/* DA9030 */
+struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
+ {
+ .name = "da903x-battery",
+ .id = DA9030_ID_BAT,
+ .platform_data = &cm_x300_battery_info,
+ },
+ {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_BUCK2,
+ .platform_data = &buck2_data,
+ },
+};
+
+static struct da903x_platform_data cm_x300_da9030_info = {
+ .num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
+ .subdevs = cm_x300_da9030_subdevs,
+};
+
+static struct i2c_board_info cm_x300_pmic_info = {
+ I2C_BOARD_INFO("da9030", 0x49),
+ .irq = IRQ_WAKEUP0,
+ .platform_data = &cm_x300_da9030_info,
+};
+
+static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
+ .use_pio = 1,
+};
+
+static void __init cm_x300_init_da9030(void)
+{
+ pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
+ i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+ irq_set_irq_wake(IRQ_WAKEUP0, 1);
+}
+
+/* wi2wi gpio setting for system_rev >= 130 */
+static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
+ { 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
+ { 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
+};
+
+static void __init cm_x300_init_wi2wi(void)
+{
+ int err;
+
+ if (system_rev < 130) {
+ cm_x300_wi2wi_gpios[0].gpio = 77; /* wlan en */
+ cm_x300_wi2wi_gpios[1].gpio = 78; /* bt reset */
+ }
+
+ /* Libertas and CSR reset */
+ err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
+ if (err) {
+ pr_err("failed to request wifi/bt gpios: %d\n", err);
+ return;
+ }
+
+ udelay(10);
+ gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
+ udelay(10);
+ gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
+
+ gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
+}
+
+/* MFP */
+static void __init cm_x300_init_mfp(void)
+{
+ /* board-processor specific GPIO initialization */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
+
+ if (system_rev < 130)
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
+ else
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
+
+ if (cpu_is_pxa310())
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
+}
+
+static void __init cm_x300_init(void)
+{
+ cm_x300_init_mfp();
+
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ if (cpu_is_pxa300())
+ pxa_set_ffuart_info(NULL);
+
+ cm_x300_init_da9030();
+ cm_x300_init_dm9000();
+ cm_x300_init_lcd();
+ cm_x300_init_u2d();
+ cm_x300_init_ohci();
+ cm_x300_init_mmc();
+ cm_x300_init_nand();
+ cm_x300_init_leds();
+ cm_x300_init_i2c();
+ cm_x300_init_spi();
+ cm_x300_init_rtc();
+ cm_x300_init_ac97();
+ cm_x300_init_wi2wi();
+ cm_x300_init_bl();
+
+ regulator_has_full_constraints();
+}
+
+static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
+{
+ /* Make sure that mi->bank[0].start = PHYS_ADDR */
+ for (; tags->hdr.size; tags = tag_next(tags))
+ if (tags->hdr.tag == ATAG_MEM &&
+ tags->u.mem.start == 0x80000000) {
+ tags->u.mem.start = 0xa0000000;
+ break;
+ }
+}
+
+MACHINE_START(CM_X300, "CM-X300 module")
+ .atag_offset = 0x100,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = cm_x300_init,
+ .fixup = cm_x300_fixup,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
new file mode 100644
index 0000000..10e2278
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -0,0 +1,120 @@
+/*
+ * linux/arch/arm/mach-pxa/colibri-evalboard.c
+ *
+ * Support for Toradex Colibri Evaluation Carrier Board
+ * Daniel Mack <daniel@caiaq.de>
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/mach/arch.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <asm/io.h>
+
+#include "pxa27x.h"
+#include "colibri.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include "pxa27x-udc.h"
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
+ .gpio_card_ro = -1,
+ .detect_delay_ms = 200,
+};
+
+static void __init colibri_mmc_init(void)
+{
+ if (machine_is_colibri()) /* PXA270 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO0_COLIBRI_PXA270_SD_DETECT;
+ if (machine_is_colibri300()) /* PXA300 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO13_COLIBRI_PXA300_SD_DETECT;
+ else /* PXA320 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO28_COLIBRI_PXA320_SD_DETECT;
+
+ pxa_set_mci_info(&colibri_mci_platform_data);
+}
+#else
+static inline void colibri_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_ohci_init(struct device *dev)
+{
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+ return 0;
+}
+
+static struct pxaohci_platform_data colibri_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 |
+ POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .init = colibri_ohci_init,
+};
+
+static void __init colibri_uhc_init(void)
+{
+ /* Colibri PXA270 has two usb ports, TBA for 320 */
+ if (machine_is_colibri())
+ colibri_ohci_info.flags |= ENABLE_PORT2;
+
+ pxa_set_ohci_info(&colibri_ohci_info);
+}
+#else
+static inline void colibri_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C RTC
+ ******************************************************************************/
+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
+static struct i2c_board_info __initdata colibri_i2c_devs[] = {
+ {
+ I2C_BOARD_INFO("m41t00", 0x68),
+ },
+};
+
+static void __init colibri_rtc_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
+}
+#else
+static inline void colibri_rtc_init(void) {}
+#endif
+
+void __init colibri_evalboard_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ colibri_mmc_init();
+ colibri_uhc_init();
+ colibri_rtc_init();
+}
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
new file mode 100644
index 0000000..3ccf2a9
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -0,0 +1,230 @@
+/*
+ * linux/arch/arm/mach-pxa/income.c
+ *
+ * Support for Income s.r.o. SH-Dmaster PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Pavel Revak <palo@bielyvlk.sk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
+#include <linux/platform_data/video-pxafb.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define GPIO114_INCOME_ETH_IRQ (114)
+#define GPIO0_INCOME_SD_DETECT (0)
+#define GPIO0_INCOME_SD_RO (1)
+#define GPIO54_INCOME_LED_A (54)
+#define GPIO55_INCOME_LED_B (55)
+#define GPIO113_INCOME_TS_IRQ (113)
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data income_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
+ .gpio_card_detect = GPIO0_INCOME_SD_DETECT,
+ .gpio_card_ro = GPIO0_INCOME_SD_RO,
+ .detect_delay_ms = 200,
+};
+
+static void __init income_mmc_init(void)
+{
+ pxa_set_mci_info(&income_mci_platform_data);
+}
+#else
+static inline void income_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data income_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init income_uhc_init(void)
+{
+ pxa_set_ohci_info(&income_ohci_info);
+}
+#else
+static inline void income_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led income_gpio_leds[] = {
+ {
+ .name = "income:green:leda",
+ .default_trigger = "none",
+ .gpio = GPIO54_INCOME_LED_A,
+ .active_low = 1,
+ },
+ {
+ .name = "income:green:ledb",
+ .default_trigger = "none",
+ .gpio = GPIO55_INCOME_LED_B,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led_platform_data income_gpio_led_info = {
+ .leds = income_gpio_leds,
+ .num_leds = ARRAY_SIZE(income_gpio_leds),
+};
+
+static struct platform_device income_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &income_gpio_led_info,
+ }
+};
+
+static void __init income_led_init(void)
+{
+ platform_device_register(&income_leds);
+}
+#else
+static inline void income_led_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct i2c_board_info __initdata income_i2c_devs[] = {
+ {
+ I2C_BOARD_INFO("ds1340", 0x68),
+ }, {
+ I2C_BOARD_INFO("lm75", 0x4f),
+ },
+};
+
+static void __init income_i2c_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
+}
+#else
+static inline void income_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info income_lcd_modes[] = {
+{
+ .pixclock = 144700,
+ .xres = 320,
+ .yres = 240,
+ .bpp = 32,
+ .depth = 18,
+
+ .left_margin = 10,
+ .right_margin = 10,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 20,
+ .vsync_len = 2,
+
+ .sync = FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info income_lcd_screen = {
+ .modes = income_lcd_modes,
+ .num_modes = ARRAY_SIZE(income_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init income_lcd_init(void)
+{
+ pxa_set_fb_info(NULL, &income_lcd_screen);
+}
+#else
+static inline void income_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup income_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data income_backlight_data = {
+ .max_brightness = 0x3ff,
+ .dft_brightness = 0x1ff,
+ .enable_gpio = -1,
+};
+
+static struct platform_device income_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &income_backlight_data,
+ },
+};
+
+static void __init income_pwm_init(void)
+{
+ pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup));
+ platform_device_register(&income_backlight);
+}
+#else
+static inline void income_pwm_init(void) {}
+#endif
+
+void __init colibri_pxa270_income_boardinit(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ income_mmc_init();
+ income_uhc_init();
+ income_led_init();
+ income_i2c_init();
+ income_lcd_init();
+ income_pwm_init();
+}
+
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
new file mode 100644
index 0000000..e68acdd
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -0,0 +1,333 @@
+/*
+ * linux/arch/arm/mach-pxa/colibri-pxa270.c
+ *
+ * Support for Toradex PXA270 based Colibri module
+ * Daniel Mack <daniel@caiaq.de>
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/ucb1400.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+
+#include <mach/audio.h>
+#include "colibri.h"
+#include "pxa27x.h"
+
+#include "devices.h"
+#include "generic.h"
+
+/******************************************************************************
+ * Evaluation board MFP
+ ******************************************************************************/
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO0_GPIO, /* SD detect */
+
+ /* FFUART */
+ GPIO39_FFUART_TXD,
+ GPIO34_FFUART_RXD,
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ GPIO119_USBH2_PWR,
+ GPIO120_USBH2_PEN,
+
+ /* PCMCIA */
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO49_nPWE,
+ GPIO48_nPOE,
+ GPIO57_nIOIS16,
+ GPIO56_nPWAIT,
+ GPIO104_PSKTSEL,
+ GPIO53_GPIO, /* RESET */
+ GPIO83_GPIO, /* BVD1 */
+ GPIO82_GPIO, /* BVD2 */
+ GPIO1_GPIO, /* READY */
+ GPIO84_GPIO, /* DETECT */
+ GPIO107_GPIO, /* PPEN */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
+#endif
+
+#ifdef CONFIG_MACH_COLIBRI_PXA270_INCOME
+static mfp_cfg_t income_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO0_GPIO, /* SD detect */
+ GPIO1_GPIO, /* SD read-only */
+
+ /* FFUART */
+ GPIO39_FFUART_TXD,
+ GPIO34_FFUART_RXD,
+
+ /* BFUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* LED */
+ GPIO54_GPIO, /* LED A */
+ GPIO55_GPIO, /* LED B */
+};
+#else
+static mfp_cfg_t income_pin_config[] __initdata = {};
+#endif
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
+ /* Ethernet */
+ GPIO78_nCS_2, /* Ethernet CS */
+ GPIO114_GPIO, /* Ethernet IRQ */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO95_AC97_nRESET,
+ GPIO98_AC97_SYSCLK,
+ GPIO113_GPIO, /* Touchscreen IRQ */
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition colibri_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Kernel",
+ .offset = 0x00040000,
+ .size = 0x00400000,
+ .mask_flags = 0
+ }, {
+ .name = "Rootfs",
+ .offset = 0x00440000,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data colibri_flash_data[] = {
+ {
+ .width = 4, /* bankwidth in bytes */
+ .parts = colibri_partitions,
+ .nr_parts = ARRAY_SIZE(colibri_partitions)
+ }
+};
+
+static struct resource colibri_pxa270_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device colibri_pxa270_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = colibri_flash_data,
+ },
+ .resource = &colibri_pxa270_flash_resource,
+ .num_resources = 1,
+};
+
+static void __init colibri_pxa270_nor_init(void)
+{
+ platform_device_register(&colibri_pxa270_flash_device);
+}
+#else
+static inline void colibri_pxa270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource colibri_pxa270_dm9000_resources[] = {
+ {
+ .start = PXA_CS2_PHYS,
+ .end = PXA_CS2_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PXA_CS2_PHYS + 4,
+ .end = PXA_CS2_PHYS + 4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+ },
+};
+
+static struct platform_device colibri_pxa270_dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(colibri_pxa270_dm9000_resources),
+ .resource = colibri_pxa270_dm9000_resources,
+};
+
+static void __init colibri_pxa270_eth_init(void)
+{
+ platform_device_register(&colibri_pxa270_dm9000_device);
+}
+#else
+static inline void colibri_pxa270_eth_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
+ .irq = PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
+};
+
+static struct platform_device colibri_pxa270_ucb1400_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+ .dev = {
+ .platform_data = &colibri_pxa270_ucb1400_pdata,
+ },
+};
+
+static void __init colibri_pxa270_tsc_init(void)
+{
+ pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
+ platform_device_register(&colibri_pxa270_ucb1400_device);
+}
+#else
+static inline void colibri_pxa270_tsc_init(void) {}
+#endif
+
+static int colibri_pxa270_baseboard;
+core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
+
+static void __init colibri_pxa270_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+
+ colibri_pxa270_nor_init();
+ colibri_pxa270_eth_init();
+ colibri_pxa270_tsc_init();
+
+ switch (colibri_pxa270_baseboard) {
+ case COLIBRI_EVALBOARD:
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(
+ colibri_pxa270_evalboard_pin_config));
+ colibri_evalboard_init();
+ break;
+ case COLIBRI_PXA270_INCOME:
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
+ colibri_pxa270_income_boardinit();
+ break;
+ default:
+ printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
+ colibri_pxa270_baseboard);
+ }
+
+ regulator_has_full_constraints();
+}
+
+/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
+ * with the INCOME mach type or with COLIBRI and the kernel parameter
+ * "colibri_pxa270_baseboard=1"
+ */
+static void __init colibri_pxa270_income_init(void)
+{
+ colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
+ colibri_pxa270_init();
+}
+
+MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
+ .atag_offset = 0x100,
+ .init_machine = colibri_pxa270_init,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+
+MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
+ .atag_offset = 0x100,
+ .init_machine = colibri_pxa270_income_init,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
new file mode 100644
index 0000000..6a5558d
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -0,0 +1,195 @@
+/*
+ * arch/arm/mach-pxa/colibri-pxa300.c
+ *
+ * Support for Toradex PXA300/310 based Colibri module
+ *
+ * Daniel Mack <daniel@caiaq.de>
+ * Matthias Meier <matthias.j.meier@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include "pxa300.h"
+#include "colibri.h"
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <mach/audio.h>
+
+#include "generic.h"
+#include "devices.h"
+
+
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
+ /* MMC */
+ GPIO7_MMC1_CLK,
+ GPIO14_MMC1_CMD,
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO13_GPIO, /* GPIO13_COLIBRI_PXA300_SD_DETECT */
+
+ /* UHC */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+ GPIO77_USB_P3_1,
+ GPIO78_USB_P3_2,
+ GPIO79_USB_P3_3,
+ GPIO80_USB_P3_4,
+ GPIO81_USB_P3_5,
+ GPIO82_USB_P3_6,
+
+ /* I2C */
+ GPIO21_I2C_SCL,
+ GPIO22_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
+#endif
+
+#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO)
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+ .flags = 0, /* defined later */
+ .wordlength = 2,
+};
+
+static struct resource colibri_asix_resource[] = {
+ [0] = {
+ .start = PXA3xx_CS2_PHYS,
+ .end = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+ .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+ }
+};
+
+static struct platform_device asix_device = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(colibri_asix_resource),
+ .resource = colibri_asix_resource,
+ .dev = {
+ .platform_data = &colibri_asix_platdata
+ }
+};
+
+static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
+ GPIO1_nCS2, /* AX88796 chip select */
+ GPIO26_GPIO | MFP_PULL_HIGH /* AX88796 IRQ */
+};
+
+static void __init colibri_pxa300_init_eth(void)
+{
+ colibri_pxa3xx_init_eth(&colibri_asix_platdata);
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
+ platform_device_register(&asix_device);
+}
+#else
+static inline void __init colibri_pxa300_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO62_LCD_CS_N,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+ GPIO76_LCD_VSYNC,
+};
+
+static void __init colibri_pxa300_init_lcd(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
+}
+
+#else
+static inline void colibri_pxa300_init_lcd(void) {}
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
+#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
+ GPIO24_AC97_SYSCLK,
+ GPIO23_AC97_nACRESET,
+ GPIO25_AC97_SDATA_IN_0,
+ GPIO27_AC97_SDATA_OUT,
+ GPIO28_AC97_SYNC,
+ GPIO29_AC97_BITCLK
+};
+
+static inline void __init colibri_pxa310_init_ac97(void)
+{
+ /* no AC97 codec on Colibri PXA300 */
+ if (!cpu_is_pxa310())
+ return;
+
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa310_init_ac97(void) {}
+#endif
+
+void __init colibri_pxa300_init(void)
+{
+ colibri_pxa300_init_eth();
+ colibri_pxa3xx_init_nand();
+ colibri_pxa300_init_lcd();
+ colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
+ colibri_pxa310_init_ac97();
+
+ /* Evalboard init */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
+ colibri_evalboard_init();
+}
+
+MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
+ .atag_offset = 0x100,
+ .init_machine = colibri_pxa300_init,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
new file mode 100644
index 0000000..17067a3
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -0,0 +1,265 @@
+/*
+ * arch/arm/mach-pxa/colibri-pxa320.c
+ *
+ * Support for Toradex PXA320/310 based Colibri module
+ *
+ * Daniel Mack <daniel@caiaq.de>
+ * Matthias Meier <matthias.j.meier@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include "pxa320.h"
+#include "colibri.h"
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <mach/audio.h>
+#include "pxa27x-udc.h"
+#include "udc.h"
+
+#include "generic.h"
+#include "devices.h"
+
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
+ /* MMC */
+ GPIO22_MMC1_CLK,
+ GPIO23_MMC1_CMD,
+ GPIO18_MMC1_DAT0,
+ GPIO19_MMC1_DAT1,
+ GPIO20_MMC1_DAT2,
+ GPIO21_MMC1_DAT3,
+ GPIO28_GPIO, /* SD detect */
+
+ /* UART 1 configuration (may be set by bootloader) */
+ GPIO99_UART1_CTS,
+ GPIO104_UART1_RTS,
+ GPIO97_UART1_RXD,
+ GPIO98_UART1_TXD,
+ GPIO101_UART1_DTR,
+ GPIO103_UART1_DSR,
+ GPIO100_UART1_DCD,
+ GPIO102_UART1_RI,
+
+ /* UART 2 configuration */
+ GPIO109_UART2_CTS,
+ GPIO112_UART2_RTS,
+ GPIO110_UART2_RXD,
+ GPIO111_UART2_TXD,
+
+ /* UART 3 configuration */
+ GPIO30_UART3_RXD,
+ GPIO31_UART3_TXD,
+
+ /* UHC */
+ GPIO2_2_USBH_PEN,
+ GPIO3_2_USBH_PWR,
+
+ /* I2C */
+ GPIO32_I2C_SCL,
+ GPIO33_I2C_SDA,
+
+ /* PCMCIA */
+ MFP_CFG(GPIO59, AF7), /* PRST ; AF7 to tristate */
+ MFP_CFG(GPIO61, AF7), /* PCE1 ; AF7 to tristate */
+ MFP_CFG(GPIO60, AF7), /* PCE2 ; AF7 to tristate */
+ MFP_CFG(GPIO62, AF7), /* PCD ; AF7 to tristate */
+ MFP_CFG(GPIO56, AF7), /* PSKTSEL ; AF7 to tristate */
+ GPIO27_GPIO, /* RDnWR ; input/tristate */
+ GPIO50_GPIO, /* PREG ; input/tristate */
+ GPIO2_RDY,
+ GPIO5_NPIOR,
+ GPIO6_NPIOW,
+ GPIO7_NPIOS16,
+ GPIO8_NPWAIT,
+ GPIO29_GPIO, /* PRDY (READY GPIO) */
+ GPIO57_GPIO, /* PPEN (POWER GPIO) */
+ GPIO81_GPIO, /* PCD (DETECT GPIO) */
+ GPIO77_GPIO, /* PRST (RESET GPIO) */
+ GPIO53_GPIO, /* PBVD1 */
+ GPIO79_GPIO, /* PBVD2 */
+ GPIO54_GPIO, /* POE */
+};
+#else
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
+#endif
+
+#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO36_GPIO)
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+ .flags = 0, /* defined later */
+ .wordlength = 2,
+};
+
+static struct resource colibri_asix_resource[] = {
+ [0] = {
+ .start = PXA3xx_CS2_PHYS,
+ .end = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+ .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+ }
+};
+
+static struct platform_device asix_device = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(colibri_asix_resource),
+ .resource = colibri_asix_resource,
+ .dev = {
+ .platform_data = &colibri_asix_platdata
+ }
+};
+
+static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
+ GPIO3_nCS2, /* AX88796 chip select */
+ GPIO36_GPIO | MFP_PULL_HIGH /* AX88796 IRQ */
+};
+
+static void __init colibri_pxa320_init_eth(void)
+{
+ colibri_pxa3xx_init_eth(&colibri_asix_platdata);
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
+ platform_device_register(&asix_device);
+}
+#else
+static inline void __init colibri_pxa320_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
+static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
+ .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96),
+ .gpio_pullup = -1,
+};
+
+static struct platform_device colibri_pxa320_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &colibri_pxa320_gpio_vbus_info,
+ },
+};
+
+static void colibri_pxa320_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR = UP2OCR_HXOE;
+}
+
+static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
+ .udc_command = colibri_pxa320_udc_command,
+ .gpio_pullup = -1,
+};
+
+static void __init colibri_pxa320_init_udc(void)
+{
+ pxa_set_udc_info(&colibri_pxa320_udc_info);
+ platform_device_register(&colibri_pxa320_gpio_vbus);
+}
+#else
+static inline void colibri_pxa320_init_udc(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
+ GPIO6_2_LCD_LDD_0,
+ GPIO7_2_LCD_LDD_1,
+ GPIO8_2_LCD_LDD_2,
+ GPIO9_2_LCD_LDD_3,
+ GPIO10_2_LCD_LDD_4,
+ GPIO11_2_LCD_LDD_5,
+ GPIO12_2_LCD_LDD_6,
+ GPIO13_2_LCD_LDD_7,
+ GPIO63_LCD_LDD_8,
+ GPIO64_LCD_LDD_9,
+ GPIO65_LCD_LDD_10,
+ GPIO66_LCD_LDD_11,
+ GPIO67_LCD_LDD_12,
+ GPIO68_LCD_LDD_13,
+ GPIO69_LCD_LDD_14,
+ GPIO70_LCD_LDD_15,
+ GPIO71_LCD_LDD_16,
+ GPIO72_LCD_LDD_17,
+ GPIO73_LCD_CS_N,
+ GPIO74_LCD_VSYNC,
+ GPIO14_2_LCD_FCLK,
+ GPIO15_2_LCD_LCLK,
+ GPIO16_2_LCD_PCLK,
+ GPIO17_2_LCD_BIAS,
+};
+
+static void __init colibri_pxa320_init_lcd(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
+}
+#else
+static inline void colibri_pxa320_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_SND_AC97_CODEC) || \
+ defined(CONFIG_SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
+ GPIO34_AC97_SYSCLK,
+ GPIO35_AC97_SDATA_IN_0,
+ GPIO37_AC97_SDATA_OUT,
+ GPIO38_AC97_SYNC,
+ GPIO39_AC97_BITCLK,
+ GPIO40_AC97_nACRESET
+};
+
+static inline void __init colibri_pxa320_init_ac97(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa320_init_ac97(void) {}
+#endif
+
+void __init colibri_pxa320_init(void)
+{
+ colibri_pxa320_init_eth();
+ colibri_pxa3xx_init_nand();
+ colibri_pxa320_init_lcd();
+ colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
+ colibri_pxa320_init_ac97();
+ colibri_pxa320_init_udc();
+
+ /* Evalboard init */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
+ colibri_evalboard_init();
+}
+
+MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
+ .atag_offset = 0x100,
+ .init_machine = colibri_pxa320_init,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
new file mode 100644
index 0000000..e31a591
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -0,0 +1,151 @@
+/*
+ * arch/arm/mach-pxa/colibri-pxa3xx.c
+ *
+ * Common functions for all Toradex PXA3xx modules
+ *
+ * Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/etherdevice.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/sizes.h>
+#include <asm/system_info.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/pxa3xx-regs.h>
+#include "mfp-pxa300.h"
+#include "colibri.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_AX88796)
+#define ETHER_ADDR_LEN 6
+static u8 ether_mac_addr[ETHER_ADDR_LEN];
+
+void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
+{
+ int i;
+ u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
+
+ /*
+ * If the bootloader passed in a serial boot tag, which contains a
+ * valid ethernet MAC, pass it to the interface. Toradex ships the
+ * modules with their own bootloader which provides a valid MAC
+ * this way.
+ */
+
+ for (i = 0; i < ETHER_ADDR_LEN; i++) {
+ ether_mac_addr[i] = serial & 0xff;
+ serial >>= 8;
+ }
+
+ if (is_valid_ether_addr(ether_mac_addr)) {
+ plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
+ plat_data->mac_addr = ether_mac_addr;
+ printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
+ __func__);
+ } else {
+ plat_data->flags |= AXFLG_MAC_FROMDEV;
+ printk(KERN_INFO "%s(): no valid serial boot tag found, "
+ "taking MAC from device\n", __func__);
+ }
+}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static int lcd_bl_pin;
+
+/*
+ * LCD panel (Sharp LQ043T3DX02)
+ */
+static void colibri_lcd_backlight(int on)
+{
+ gpio_set_value(lcd_bl_pin, !!on);
+}
+
+static struct pxafb_mode_info sharp_lq43_mode = {
+ .pixclock = 101936,
+ .xres = 480,
+ .yres = 272,
+ .bpp = 32,
+ .depth = 18,
+ .hsync_len = 41,
+ .left_margin = 2,
+ .right_margin = 2,
+ .vsync_len = 10,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info sharp_lq43_info = {
+ .modes = &sharp_lq43_mode,
+ .num_modes = 1,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .lcd_conn = LCD_COLOR_TFT_18BPP,
+ .pxafb_backlight_power = colibri_lcd_backlight,
+};
+
+void __init colibri_pxa3xx_init_lcd(int bl_pin)
+{
+ lcd_bl_pin = bl_pin;
+ gpio_request(bl_pin, "lcd backlight");
+ gpio_direction_output(bl_pin, 0);
+ pxa_set_fb_info(NULL, &sharp_lq43_info);
+}
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
+static struct mtd_partition colibri_nand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_512K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "fs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct pxa3xx_nand_platform_data colibri_nand_info = {
+ .keep_config = 1,
+ .parts = colibri_nand_partitions,
+ .nr_parts = ARRAY_SIZE(colibri_nand_partitions),
+};
+
+void __init colibri_pxa3xx_init_nand(void)
+{
+ pxa3xx_set_nand_info(&colibri_nand_info);
+}
+#endif
+
diff --git a/arch/arm/mach-pxa/colibri.h b/arch/arm/mach-pxa/colibri.h
new file mode 100644
index 0000000..85525d4
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _COLIBRI_H_
+#define _COLIBRI_H_
+
+#include <net/ax88796.h>
+#include <mach/mfp.h>
+
+/*
+ * base board glue for PXA270 module
+ */
+
+enum {
+ COLIBRI_EVALBOARD = 0,
+ COLIBRI_PXA270_INCOME,
+};
+
+#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
+extern void colibri_evalboard_init(void);
+#else
+static inline void colibri_evalboard_init(void) {}
+#endif
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
+extern void colibri_pxa270_income_boardinit(void);
+#else
+static inline void colibri_pxa270_income_boardinit(void) {}
+#endif
+
+/*
+ * common settings for all modules
+ */
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
+#else
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern void colibri_pxa3xx_init_lcd(int bl_pin);
+#else
+static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
+#endif
+
+#if defined(CONFIG_AX88796)
+extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
+extern void colibri_pxa3xx_init_nand(void);
+#else
+static inline void colibri_pxa3xx_init_nand(void) {}
+#endif
+
+/* physical memory regions */
+#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
+
+/* GPIO definitions for Colibri PXA270 */
+#define GPIO114_COLIBRI_PXA270_ETH_IRQ 114
+#define GPIO0_COLIBRI_PXA270_SD_DETECT 0
+#define GPIO113_COLIBRI_PXA270_TS_IRQ 113
+
+/* GPIO definitions for Colibri PXA300/310 */
+#define GPIO13_COLIBRI_PXA300_SD_DETECT 13
+
+/* GPIO definitions for Colibri PXA320 */
+#define GPIO28_COLIBRI_PXA320_SD_DETECT 28
+
+#endif /* _COLIBRI_H_ */
+
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
new file mode 100644
index 0000000..9a5a35e
--- /dev/null
+++ b/arch/arm/mach-pxa/corgi.c
@@ -0,0 +1,793 @@
+/*
+ * Support for Sharp SL-C7xx PDAs
+ * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches/lubbock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h> /* symbol_get ; symbol_put */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+#include <linux/backlight.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/io.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/gpio_keys.h>
+#include <linux/memblock.h>
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "pxa25x.h"
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include "udc.h"
+#include <mach/corgi.h>
+#include "sharpsl_pm.h"
+
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/scoop.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long corgi_pin_config[] __initdata = {
+ /* Static Memory I/O */
+ GPIO78_nCS_2, /* w100fb */
+ GPIO80_nCS_4, /* scoop */
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+ GPIO24_GPIO, /* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+ GPIO32_I2S_SYSCLK,
+
+ /* Infra-Red */
+ GPIO47_FICP_TXD,
+ GPIO46_FICP_RXD,
+
+ /* FFUART */
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+ GPIO39_FFUART_TXD,
+ GPIO37_FFUART_DSR,
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+
+ /* GPIO Matrix Keypad */
+ GPIO66_GPIO | MFP_LPM_DRIVE_HIGH, /* column 0 */
+ GPIO67_GPIO | MFP_LPM_DRIVE_HIGH, /* column 1 */
+ GPIO68_GPIO | MFP_LPM_DRIVE_HIGH, /* column 2 */
+ GPIO69_GPIO | MFP_LPM_DRIVE_HIGH, /* column 3 */
+ GPIO70_GPIO | MFP_LPM_DRIVE_HIGH, /* column 4 */
+ GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* column 5 */
+ GPIO72_GPIO | MFP_LPM_DRIVE_HIGH, /* column 6 */
+ GPIO73_GPIO | MFP_LPM_DRIVE_HIGH, /* column 7 */
+ GPIO74_GPIO | MFP_LPM_DRIVE_HIGH, /* column 8 */
+ GPIO75_GPIO | MFP_LPM_DRIVE_HIGH, /* column 9 */
+ GPIO76_GPIO | MFP_LPM_DRIVE_HIGH, /* column 10 */
+ GPIO77_GPIO | MFP_LPM_DRIVE_HIGH, /* column 11 */
+ GPIO58_GPIO, /* row 0 */
+ GPIO59_GPIO, /* row 1 */
+ GPIO60_GPIO, /* row 2 */
+ GPIO61_GPIO, /* row 3 */
+ GPIO62_GPIO, /* row 4 */
+ GPIO63_GPIO, /* row 5 */
+ GPIO64_GPIO, /* row 6 */
+ GPIO65_GPIO, /* row 7 */
+
+ /* GPIO */
+ GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */
+ GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */
+ GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
+ GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_LED_ORANGE */
+ GPIO21_GPIO, /* CORGI_GPIO_ADC_TEMP */
+ GPIO22_GPIO, /* CORGI_GPIO_IR_ON */
+ GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */
+ GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_ON */
+ GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_UKN */
+ GPIO44_GPIO, /* CORGI_GPIO_HSYNC */
+
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_KEY_INT */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* CORGI_GPIO_AC_IN */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_WAKEUP */
+};
+
+/*
+ * Corgi SCOOP Device
+ */
+static struct resource corgi_scoop_resources[] = {
+ [0] = {
+ .start = 0x10800000,
+ .end = 0x10800fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config corgi_scoop_setup = {
+ .io_dir = CORGI_SCOOP_IO_DIR,
+ .io_out = CORGI_SCOOP_IO_OUT,
+ .gpio_base = CORGI_SCOOP_GPIO_BASE,
+};
+
+struct platform_device corgiscoop_device = {
+ .name = "sharp-scoop",
+ .id = -1,
+ .dev = {
+ .platform_data = &corgi_scoop_setup,
+ },
+ .num_resources = ARRAY_SIZE(corgi_scoop_resources),
+ .resource = corgi_scoop_resources,
+};
+
+static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
+{
+ .dev = &corgiscoop_device.dev,
+ .irq = CORGI_IRQ_GPIO_CF_IRQ,
+ .cd_irq = CORGI_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+},
+};
+
+static struct scoop_pcmcia_config corgi_pcmcia_config = {
+ .devs = &corgi_pcmcia_scoop[0],
+ .num_devs = 1,
+};
+
+static struct w100_mem_info corgi_fb_mem = {
+ .ext_cntl = 0x00040003,
+ .sdram_mode_reg = 0x00650021,
+ .ext_timing_cntl = 0x10002a4a,
+ .io_cntl = 0x7ff87012,
+ .size = 0x1fffff,
+};
+
+static struct w100_gen_regs corgi_fb_regs = {
+ .lcd_format = 0x00000003,
+ .lcdd_cntl1 = 0x01CC0000,
+ .lcdd_cntl2 = 0x0003FFFF,
+ .genlcd_cntl1 = 0x00FFFF0D,
+ .genlcd_cntl2 = 0x003F3003,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_gpio_regs corgi_fb_gpio = {
+ .init_data1 = 0x000000bf,
+ .init_data2 = 0x00000000,
+ .gpio_dir1 = 0x00000000,
+ .gpio_oe1 = 0x03c0feff,
+ .gpio_dir2 = 0x00000000,
+ .gpio_oe2 = 0x00000000,
+};
+
+static struct w100_mode corgi_fb_modes[] = {
+{
+ .xres = 480,
+ .yres = 640,
+ .left_margin = 0x56,
+ .right_margin = 0x55,
+ .upper_margin = 0x03,
+ .lower_margin = 0x00,
+ .crtc_ss = 0x82360056,
+ .crtc_ls = 0xA0280000,
+ .crtc_gs = 0x80280028,
+ .crtc_vpos_gs = 0x02830002,
+ .crtc_rev = 0x00400008,
+ .crtc_dclk = 0xA0000000,
+ .crtc_gclk = 0x8015010F,
+ .crtc_goe = 0x80100110,
+ .crtc_ps1_active = 0x41060010,
+ .pll_freq = 75,
+ .fast_pll_freq = 100,
+ .sysclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .pixclk_src = CLK_SRC_PLL,
+ .pixclk_divider = 2,
+ .pixclk_divider_rotated = 6,
+},{
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 0x27,
+ .right_margin = 0x2e,
+ .upper_margin = 0x01,
+ .lower_margin = 0x00,
+ .crtc_ss = 0x81170027,
+ .crtc_ls = 0xA0140000,
+ .crtc_gs = 0xC0140014,
+ .crtc_vpos_gs = 0x00010141,
+ .crtc_rev = 0x00400008,
+ .crtc_dclk = 0xA0000000,
+ .crtc_gclk = 0x8015010F,
+ .crtc_goe = 0x80100110,
+ .crtc_ps1_active = 0x41060010,
+ .pll_freq = 0,
+ .fast_pll_freq = 0,
+ .sysclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 0,
+ .pixclk_src = CLK_SRC_XTAL,
+ .pixclk_divider = 1,
+ .pixclk_divider_rotated = 1,
+},
+
+};
+
+static struct w100fb_mach_info corgi_fb_info = {
+ .init_mode = INIT_MODE_ROTATED,
+ .mem = &corgi_fb_mem,
+ .regs = &corgi_fb_regs,
+ .modelist = &corgi_fb_modes[0],
+ .num_modes = 2,
+ .gpio = &corgi_fb_gpio,
+ .xtal_freq = 12500000,
+ .xtal_dbl = 0,
+};
+
+static struct resource corgi_fb_resources[] = {
+ [0] = {
+ .start = 0x08000000,
+ .end = 0x08ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device corgifb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(corgi_fb_resources),
+ .resource = corgi_fb_resources,
+ .dev = {
+ .platform_data = &corgi_fb_info,
+ },
+
+};
+
+/*
+ * Corgi Keyboard Device
+ */
+#define CORGI_KEY_CALENDER KEY_F1
+#define CORGI_KEY_ADDRESS KEY_F2
+#define CORGI_KEY_FN KEY_F3
+#define CORGI_KEY_CANCEL KEY_F4
+#define CORGI_KEY_OFF KEY_SUSPEND
+#define CORGI_KEY_EXOK KEY_F5
+#define CORGI_KEY_EXCANCEL KEY_F6
+#define CORGI_KEY_EXJOGDOWN KEY_F7
+#define CORGI_KEY_EXJOGUP KEY_F8
+#define CORGI_KEY_JAP1 KEY_LEFTCTRL
+#define CORGI_KEY_JAP2 KEY_LEFTALT
+#define CORGI_KEY_MAIL KEY_F10
+#define CORGI_KEY_OK KEY_F11
+#define CORGI_KEY_MENU KEY_F12
+
+static const uint32_t corgikbd_keymap[] = {
+ KEY(0, 1, KEY_1),
+ KEY(0, 2, KEY_3),
+ KEY(0, 3, KEY_5),
+ KEY(0, 4, KEY_6),
+ KEY(0, 5, KEY_7),
+ KEY(0, 6, KEY_9),
+ KEY(0, 7, KEY_0),
+ KEY(0, 8, KEY_BACKSPACE),
+ KEY(1, 1, KEY_2),
+ KEY(1, 2, KEY_4),
+ KEY(1, 3, KEY_R),
+ KEY(1, 4, KEY_Y),
+ KEY(1, 5, KEY_8),
+ KEY(1, 6, KEY_I),
+ KEY(1, 7, KEY_O),
+ KEY(1, 8, KEY_P),
+ KEY(2, 0, KEY_TAB),
+ KEY(2, 1, KEY_Q),
+ KEY(2, 2, KEY_E),
+ KEY(2, 3, KEY_T),
+ KEY(2, 4, KEY_G),
+ KEY(2, 5, KEY_U),
+ KEY(2, 6, KEY_J),
+ KEY(2, 7, KEY_K),
+ KEY(3, 0, CORGI_KEY_CALENDER),
+ KEY(3, 1, KEY_W),
+ KEY(3, 2, KEY_S),
+ KEY(3, 3, KEY_F),
+ KEY(3, 4, KEY_V),
+ KEY(3, 5, KEY_H),
+ KEY(3, 6, KEY_M),
+ KEY(3, 7, KEY_L),
+ KEY(3, 9, KEY_RIGHTSHIFT),
+ KEY(4, 0, CORGI_KEY_ADDRESS),
+ KEY(4, 1, KEY_A),
+ KEY(4, 2, KEY_D),
+ KEY(4, 3, KEY_C),
+ KEY(4, 4, KEY_B),
+ KEY(4, 5, KEY_N),
+ KEY(4, 6, KEY_DOT),
+ KEY(4, 8, KEY_ENTER),
+ KEY(4, 10, KEY_LEFTSHIFT),
+ KEY(5, 0, CORGI_KEY_MAIL),
+ KEY(5, 1, KEY_Z),
+ KEY(5, 2, KEY_X),
+ KEY(5, 3, KEY_MINUS),
+ KEY(5, 4, KEY_SPACE),
+ KEY(5, 5, KEY_COMMA),
+ KEY(5, 7, KEY_UP),
+ KEY(5, 11, CORGI_KEY_FN),
+ KEY(6, 0, KEY_SYSRQ),
+ KEY(6, 1, CORGI_KEY_JAP1),
+ KEY(6, 2, CORGI_KEY_JAP2),
+ KEY(6, 3, CORGI_KEY_CANCEL),
+ KEY(6, 4, CORGI_KEY_OK),
+ KEY(6, 5, CORGI_KEY_MENU),
+ KEY(6, 6, KEY_LEFT),
+ KEY(6, 7, KEY_DOWN),
+ KEY(6, 8, KEY_RIGHT),
+ KEY(7, 0, CORGI_KEY_OFF),
+ KEY(7, 1, CORGI_KEY_EXOK),
+ KEY(7, 2, CORGI_KEY_EXCANCEL),
+ KEY(7, 3, CORGI_KEY_EXJOGDOWN),
+ KEY(7, 4, CORGI_KEY_EXJOGUP),
+};
+
+static struct matrix_keymap_data corgikbd_keymap_data = {
+ .keymap = corgikbd_keymap,
+ .keymap_size = ARRAY_SIZE(corgikbd_keymap),
+};
+
+static const int corgikbd_row_gpios[] =
+ { 58, 59, 60, 61, 62, 63, 64, 65 };
+static const int corgikbd_col_gpios[] =
+ { 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
+
+static struct matrix_keypad_platform_data corgikbd_pdata = {
+ .keymap_data = &corgikbd_keymap_data,
+ .row_gpios = corgikbd_row_gpios,
+ .col_gpios = corgikbd_col_gpios,
+ .num_row_gpios = ARRAY_SIZE(corgikbd_row_gpios),
+ .num_col_gpios = ARRAY_SIZE(corgikbd_col_gpios),
+ .col_scan_delay_us = 10,
+ .debounce_ms = 10,
+ .wakeup = 1,
+};
+
+static struct platform_device corgikbd_device = {
+ .name = "matrix-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &corgikbd_pdata,
+ },
+};
+
+static struct gpio_keys_button corgi_gpio_keys[] = {
+ {
+ .type = EV_SW,
+ .code = SW_LID,
+ .gpio = CORGI_GPIO_SWA,
+ .desc = "Lid close switch",
+ .debounce_interval = 500,
+ },
+ {
+ .type = EV_SW,
+ .code = SW_TABLET_MODE,
+ .gpio = CORGI_GPIO_SWB,
+ .desc = "Tablet mode switch",
+ .debounce_interval = 500,
+ },
+ {
+ .type = EV_SW,
+ .code = SW_HEADPHONE_INSERT,
+ .gpio = CORGI_GPIO_AK_INT,
+ .desc = "HeadPhone insert",
+ .debounce_interval = 500,
+ },
+};
+
+static struct gpio_keys_platform_data corgi_gpio_keys_platform_data = {
+ .buttons = corgi_gpio_keys,
+ .nbuttons = ARRAY_SIZE(corgi_gpio_keys),
+ .poll_interval = 250,
+};
+
+static struct platform_device corgi_gpio_keys_device = {
+ .name = "gpio-keys-polled",
+ .id = -1,
+ .dev = {
+ .platform_data = &corgi_gpio_keys_platform_data,
+ },
+};
+
+/*
+ * Corgi LEDs
+ */
+static struct gpio_led corgi_gpio_leds[] = {
+ {
+ .name = "corgi:amber:charge",
+ .default_trigger = "sharpsl-charge",
+ .gpio = CORGI_GPIO_LED_ORANGE,
+ },
+ {
+ .name = "corgi:green:mail",
+ .default_trigger = "nand-disk",
+ .gpio = CORGI_GPIO_LED_GREEN,
+ },
+};
+
+static struct gpio_led_platform_data corgi_gpio_leds_info = {
+ .leds = corgi_gpio_leds,
+ .num_leds = ARRAY_SIZE(corgi_gpio_leds),
+};
+
+static struct platform_device corgiled_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &corgi_gpio_leds_info,
+ },
+};
+
+/*
+ * Corgi Audio
+ */
+static struct platform_device corgi_audio_device = {
+ .name = "corgi-audio",
+ .id = -1,
+};
+
+/*
+ * MMC/SD Device
+ *
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static struct pxamci_platform_data corgi_mci_platform_data = {
+ .detect_delay_ms = 250,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = CORGI_GPIO_nSD_DETECT,
+ .gpio_card_ro = CORGI_GPIO_nSD_WP,
+ .gpio_power = CORGI_GPIO_SD_PWR,
+};
+
+
+/*
+ * Irda
+ */
+static struct pxaficp_platform_data corgi_ficp_platform_data = {
+ .gpio_pwdown = CORGI_GPIO_IR_ON,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+
+/*
+ * USB Device Controller
+ */
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+ /* no connect GPIO; corgi can't tell connection status */
+ .gpio_pullup = CORGI_GPIO_USB_PULLUP,
+};
+
+#if IS_ENABLED(CONFIG_SPI_PXA2XX)
+static struct pxa2xx_spi_master corgi_spi_info = {
+ .num_chipselect = 3,
+};
+
+static void corgi_wait_for_hsync(void)
+{
+ while (gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+}
+
+static struct ads7846_platform_data corgi_ads7846_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .gpio_pendown = CORGI_GPIO_TP_INT,
+ .wait_for_sync = corgi_wait_for_hsync,
+};
+
+static struct pxa2xx_spi_chip corgi_ads7846_chip = {
+ .gpio_cs = CORGI_GPIO_ADS7846_CS,
+};
+
+static void corgi_bl_kick_battery(void)
+{
+ void (*kick_batt)(void);
+
+ kick_batt = symbol_get(sharpsl_battery_kick);
+ if (kick_batt) {
+ kick_batt();
+ symbol_put(sharpsl_battery_kick);
+ }
+}
+
+static struct corgi_lcd_platform_data corgi_lcdcon_info = {
+ .init_mode = CORGI_LCD_MODE_VGA,
+ .max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
+ .gpio_backlight_cont = CORGI_GPIO_BACKLIGHT_CONT,
+ .gpio_backlight_on = -1,
+ .kick_battery = corgi_bl_kick_battery,
+};
+
+static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
+ .gpio_cs = CORGI_GPIO_LCDCON_CS,
+};
+
+static struct pxa2xx_spi_chip corgi_max1111_chip = {
+ .gpio_cs = CORGI_GPIO_MAX1111_CS,
+};
+
+static struct spi_board_info corgi_spi_devices[] = {
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 1200000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &corgi_ads7846_info,
+ .controller_data= &corgi_ads7846_chip,
+ .irq = PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
+ }, {
+ .modalias = "corgi-lcd",
+ .max_speed_hz = 50000,
+ .bus_num = 1,
+ .chip_select = 1,
+ .platform_data = &corgi_lcdcon_info,
+ .controller_data= &corgi_lcdcon_chip,
+ }, {
+ .modalias = "max1111",
+ .max_speed_hz = 450000,
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data= &corgi_max1111_chip,
+ },
+};
+
+static void __init corgi_init_spi(void)
+{
+ pxa2xx_set_spi_info(1, &corgi_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
+}
+#else
+static inline void corgi_init_spi(void) {}
+#endif
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr sharpsl_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static const char * const probes[] = {
+ "cmdlinepart",
+ "ofpart",
+ "sharpslpart",
+ NULL,
+};
+
+static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
+ .badblock_pattern = &sharpsl_bbt,
+ .part_parsers = probes,
+};
+
+static struct resource sharpsl_nand_resources[] = {
+ {
+ .start = 0x0C000000,
+ .end = 0x0C000FFF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_nand_device = {
+ .name = "sharpsl-nand",
+ .id = -1,
+ .resource = sharpsl_nand_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_nand_resources),
+ .dev.platform_data = &sharpsl_nand_platform_data,
+};
+
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00120000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &corgiscoop_device,
+ &corgifb_device,
+ &corgi_gpio_keys_device,
+ &corgikbd_device,
+ &corgiled_device,
+ &corgi_audio_device,
+ &sharpsl_nand_device,
+ &sharpsl_rom_device,
+};
+
+static struct i2c_board_info __initdata corgi_i2c_devices[] = {
+ { I2C_BOARD_INFO("wm8731", 0x1b) },
+};
+
+static void corgi_poweroff(void)
+{
+ if (!machine_is_corgi())
+ /* Green LED off tells the bootloader to halt */
+ gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
+
+ pxa_restart(REBOOT_HARD, NULL);
+}
+
+static void corgi_restart(enum reboot_mode mode, const char *cmd)
+{
+ if (!machine_is_corgi())
+ /* Green LED on tells the bootloader to reboot */
+ gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
+
+ pxa_restart(REBOOT_HARD, cmd);
+}
+
+static void __init corgi_init(void)
+{
+ pm_power_off = corgi_poweroff;
+
+ /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+ PCFR |= PCFR_OPDE;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
+
+ /* allow wakeup from various GPIOs */
+ gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
+ gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
+ gpio_set_wake(CORGI_GPIO_AC_IN, 1);
+ gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
+
+ if (!machine_is_corgi())
+ gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ corgi_init_spi();
+
+ pxa_set_udc_info(&udc_info);
+ pxa_set_mci_info(&corgi_mci_platform_data);
+ pxa_set_ficp_info(&corgi_ficp_platform_data);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
+
+ platform_scoop_config = &corgi_pcmcia_config;
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ regulator_has_full_constraints();
+}
+
+static void __init fixup_corgi(struct tag *tags, char **cmdline)
+{
+ sharpsl_save_param();
+ if (machine_is_corgi())
+ memblock_add(0xa0000000, SZ_32M);
+ else
+ memblock_add(0xa0000000, SZ_64M);
+}
+
+#ifdef CONFIG_MACH_CORGI
+MACHINE_START(CORGI, "SHARP Corgi")
+ .fixup = fixup_corgi,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_machine = corgi_init,
+ .init_time = pxa_timer_init,
+ .restart = corgi_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_SHEPHERD
+MACHINE_START(SHEPHERD, "SHARP Shepherd")
+ .fixup = fixup_corgi,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_machine = corgi_init,
+ .init_time = pxa_timer_init,
+ .restart = corgi_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_HUSKY
+MACHINE_START(HUSKY, "SHARP Husky")
+ .fixup = fixup_corgi,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_machine = corgi_init,
+ .init_time = pxa_timer_init,
+ .restart = corgi_restart,
+MACHINE_END
+#endif
+
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
new file mode 100644
index 0000000..c71c483
--- /dev/null
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -0,0 +1,226 @@
+/*
+ * Battery and Power Management code for the Sharp SL-C7xx
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/stat.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/apm-emulation.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+#include <mach/corgi.h>
+#include <mach/pxa2xx-regs.h>
+#include "sharpsl_pm.h"
+
+#include "generic.h"
+
+#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
+#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
+#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */
+#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */
+#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */
+#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */
+
+static struct gpio charger_gpios[] = {
+ { CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
+ { CORGI_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" },
+ { CORGI_GPIO_CHRG_UKN, GPIOF_OUT_INIT_LOW, "Charger Unknown" },
+ { CORGI_GPIO_AC_IN, GPIOF_IN, "Charger Detection" },
+ { CORGI_GPIO_KEY_INT, GPIOF_IN, "Key Interrupt" },
+ { CORGI_GPIO_WAKEUP, GPIOF_IN, "System wakeup notification" },
+};
+
+static void corgi_charger_init(void)
+{
+ gpio_request_array(ARRAY_AND_SIZE(charger_gpios));
+}
+
+static void corgi_measure_temp(int on)
+{
+ gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on);
+}
+
+static void corgi_charge(int on)
+{
+ if (on) {
+ if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) {
+ gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
+ gpio_set_value(CORGI_GPIO_CHRG_UKN, 1);
+ } else {
+ gpio_set_value(CORGI_GPIO_CHRG_ON, 1);
+ gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
+ }
+ } else {
+ gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
+ gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
+ }
+}
+
+static void corgi_discharge(int on)
+{
+ gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on);
+}
+
+static void corgi_presuspend(void)
+{
+}
+
+static void corgi_postsuspend(void)
+{
+}
+
+/*
+ * Check what brought us out of the suspend.
+ * Return: 0 to sleep, otherwise wake
+ */
+static int corgi_should_wakeup(unsigned int resume_on_alarm)
+{
+ int is_resume = 0;
+
+ dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
+ "GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
+ PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
+ gpio_get_value(CORGI_GPIO_CHRG_FULL),
+ gpio_get_value(CORGI_GPIO_KEY_INT),
+ gpio_get_value(CORGI_GPIO_WAKEUP));
+
+ if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
+ if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+ /* charge on */
+ dev_dbg(sharpsl_pm.dev, "ac insert\n");
+ sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+ } else {
+ /* charge off */
+ dev_dbg(sharpsl_pm.dev, "ac remove\n");
+ sharpsl_pm_led(SHARPSL_LED_OFF);
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm.charge_mode = CHRG_OFF;
+ }
+ }
+
+ if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL)))
+ dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
+
+ if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT))
+ is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT);
+
+ if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP))
+ is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP);
+
+ if (resume_on_alarm && (PEDR & PWER_RTC))
+ is_resume |= PWER_RTC;
+
+ dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
+ return is_resume;
+}
+
+static bool corgi_charger_wakeup(void)
+{
+ return !gpio_get_value(CORGI_GPIO_AC_IN) ||
+ !gpio_get_value(CORGI_GPIO_KEY_INT) ||
+ !gpio_get_value(CORGI_GPIO_WAKEUP);
+}
+
+unsigned long corgipm_read_devdata(int type)
+{
+ switch(type) {
+ case SHARPSL_STATUS_ACIN:
+ return !gpio_get_value(CORGI_GPIO_AC_IN);
+ case SHARPSL_STATUS_LOCK:
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
+ case SHARPSL_STATUS_CHRGFULL:
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
+ case SHARPSL_STATUS_FATAL:
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
+ case SHARPSL_ACIN_VOLT:
+ return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
+ case SHARPSL_BATT_TEMP:
+ return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
+ case SHARPSL_BATT_VOLT:
+ default:
+ return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
+ }
+}
+
+static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
+ .init = corgi_charger_init,
+ .exit = NULL,
+ .gpio_batlock = CORGI_GPIO_BAT_COVER,
+ .gpio_acin = CORGI_GPIO_AC_IN,
+ .gpio_batfull = CORGI_GPIO_CHRG_FULL,
+ .discharge = corgi_discharge,
+ .charge = corgi_charge,
+ .measure_temp = corgi_measure_temp,
+ .presuspend = corgi_presuspend,
+ .postsuspend = corgi_postsuspend,
+ .read_devdata = corgipm_read_devdata,
+ .charger_wakeup = corgi_charger_wakeup,
+ .should_wakeup = corgi_should_wakeup,
+#if defined(CONFIG_LCD_CORGI)
+ .backlight_limit = corgi_lcd_limit_intensity,
+#endif
+ .charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
+ .charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
+ .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
+ .charge_acin_low = SHARPSL_CHARGE_ON_ACIN_LOW,
+ .fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT,
+ .fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
+ .bat_levels = 40,
+ .bat_levels_noac = sharpsl_battery_levels_noac,
+ .bat_levels_acin = sharpsl_battery_levels_acin,
+ .status_high_acin = 188,
+ .status_low_acin = 178,
+ .status_high_noac = 185,
+ .status_low_noac = 175,
+};
+
+static struct platform_device *corgipm_device;
+
+static int corgipm_init(void)
+{
+ int ret;
+
+ if (!machine_is_corgi() && !machine_is_shepherd()
+ && !machine_is_husky())
+ return -ENODEV;
+
+ corgipm_device = platform_device_alloc("sharpsl-pm", -1);
+ if (!corgipm_device)
+ return -ENOMEM;
+
+ if (!machine_is_corgi())
+ corgi_pm_machinfo.batfull_irq = 1;
+
+ corgipm_device->dev.platform_data = &corgi_pm_machinfo;
+ ret = platform_device_add(corgipm_device);
+
+ if (ret)
+ platform_device_put(corgipm_device);
+
+ return ret;
+}
+
+static void corgipm_exit(void)
+{
+ platform_device_unregister(corgipm_device);
+}
+
+module_init(corgipm_init);
+module_exit(corgipm_exit);
diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c
new file mode 100644
index 0000000..527c9fd
--- /dev/null
+++ b/arch/arm/mach-pxa/csb701.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+
+static struct gpio_keys_button csb701_buttons[] = {
+ {
+ .code = 0x7,
+ .gpio = 1,
+ .active_low = 1,
+ .desc = "SW2",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data csb701_gpio_keys_data = {
+ .buttons = csb701_buttons,
+ .nbuttons = ARRAY_SIZE(csb701_buttons),
+};
+
+static struct gpio_led csb701_leds[] = {
+ {
+ .name = "csb701:yellow:heartbeat",
+ .default_trigger = "heartbeat",
+ .gpio = 11,
+ .active_low = 1,
+ },
+};
+
+static struct platform_device csb701_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev.platform_data = &csb701_gpio_keys_data,
+};
+
+static struct gpio_led_platform_data csb701_leds_gpio_data = {
+ .leds = csb701_leds,
+ .num_leds = ARRAY_SIZE(csb701_leds),
+};
+
+static struct platform_device csb701_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &csb701_leds_gpio_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &csb701_gpio_keys,
+ &csb701_leds_gpio,
+};
+
+static int __init csb701_init(void)
+{
+ if (!machine_is_csb726())
+ return -ENODEV;
+
+ return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+module_init(csb701_init);
+
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
new file mode 100644
index 0000000..271aeda
--- /dev/null
+++ b/arch/arm/mach-pxa/csb726.c
@@ -0,0 +1,283 @@
+/*
+ * Support for Cogent CSB726
+ *
+ * Copyright (c) 2008 Dmitry Eremin-Solenikov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sm501.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "csb726.h"
+#include "pxa27x.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <mach/audio.h>
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
+ * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
+ * XXX: 21,
+ * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
+ * XXX: 33 CS_5 for LAN9215 on R1
+ */
+
+static unsigned long csb726_pin_config[] = {
+ GPIO78_nCS_2, /* EXP_CS */
+ GPIO79_nCS_3, /* SMSC9215 */
+ GPIO80_nCS_4, /* SM501 */
+
+ GPIO52_GPIO, /* #SMSC9251 int */
+ GPIO53_GPIO, /* SM501 int */
+
+ GPIO1_GPIO, /* GPIO0 */
+ GPIO11_GPIO, /* GPIO1 */
+ GPIO9_GPIO, /* GPIO2 */
+ GPIO10_GPIO, /* GPIO3 */
+ GPIO16_PWM0_OUT, /* or GPIO4 */
+ GPIO17_PWM1_OUT, /* or GPIO5 */
+ GPIO94_GPIO, /* GPIO6 */
+ GPIO95_GPIO, /* GPIO7 */
+ GPIO96_GPIO, /* GPIO8 */
+ GPIO97_GPIO, /* GPIO9 */
+ GPIO15_GPIO, /* EXP_IRQ */
+ GPIO18_RDY, /* EXP_WAIT */
+
+ GPIO0_GPIO, /* PWR_INT */
+ GPIO104_GPIO, /* PWR_OFF */
+
+ GPIO12_GPIO, /* touch irq */
+
+ GPIO13_SSP2_TXD,
+ GPIO14_SSP2_SFRM,
+ MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
+ GPIO22_SSP2_SCLK,
+
+ GPIO81_SSP3_TXD,
+ GPIO82_SSP3_RXD,
+ GPIO83_SSP3_SFRM,
+ GPIO84_SSP3_SCLK,
+
+ GPIO20_GPIO, /* SDIO int */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO100_GPIO, /* SD CD */
+ GPIO101_GPIO, /* SD WP */
+
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO113_AC97_nRESET,
+
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16, /* maybe unused */
+ GPIO85_nPCE_1,
+ GPIO98_GPIO, /* CF IRQ */
+ GPIO99_GPIO, /* CF CD */
+ GPIO103_GPIO, /* Reset */
+
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+};
+
+static struct pxamci_platform_data csb726_mci = {
+ .detect_delay_ms = 500,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ /* FIXME setpower */
+ .gpio_card_detect = CSB726_GPIO_MMC_DETECT,
+ .gpio_card_ro = CSB726_GPIO_MMC_RO,
+ .gpio_power = -1,
+};
+
+static struct pxaohci_platform_data csb726_ohci_platform_data = {
+ .port_mode = PMM_NPS_MODE,
+ .flags = ENABLE_PORT1 | NO_OC_PROTECTION,
+};
+
+static struct mtd_partition csb726_flash_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0,
+ .size = CSB726_FLASH_uMON,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "root",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data csb726_flash_data = {
+ .width = 2,
+ .parts = csb726_flash_partitions,
+ .nr_parts = ARRAY_SIZE(csb726_flash_partitions),
+};
+
+static struct resource csb726_flash_resources[] = {
+ {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device csb726_flash = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &csb726_flash_data,
+ },
+ .resource = csb726_flash_resources,
+ .num_resources = ARRAY_SIZE(csb726_flash_resources),
+};
+
+static struct resource csb726_sm501_resources[] = {
+ {
+ .start = PXA_CS4_PHYS,
+ .end = PXA_CS4_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "sm501-localmem",
+ },
+ {
+ .start = PXA_CS4_PHYS + SZ_64M - SZ_2M,
+ .end = PXA_CS4_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "sm501-regs",
+ },
+ {
+ .start = CSB726_IRQ_SM501,
+ .end = CSB726_IRQ_SM501,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sm501_initdata csb726_sm501_initdata = {
+/* .devices = SM501_USE_USB_HOST, */
+ .devices = SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
+};
+
+static struct sm501_platdata csb726_sm501_platdata = {
+ .init = &csb726_sm501_initdata,
+};
+
+static struct platform_device csb726_sm501 = {
+ .name = "sm501",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(csb726_sm501_resources),
+ .resource = csb726_sm501_resources,
+ .dev = {
+ .platform_data = &csb726_sm501_platdata,
+ },
+};
+
+static struct resource csb726_lan_resources[] = {
+ {
+ .start = PXA_CS3_PHYS,
+ .end = PXA_CS3_PHYS + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = CSB726_IRQ_LAN,
+ .end = CSB726_IRQ_LAN,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+struct smsc911x_platform_config csb726_lan_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_32BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device csb726_lan = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(csb726_lan_resources),
+ .resource = csb726_lan_resources,
+ .dev = {
+ .platform_data = &csb726_lan_config,
+ },
+};
+
+static struct platform_device *devices[] __initdata = {
+ &csb726_flash,
+ &csb726_sm501,
+ &csb726_lan,
+};
+
+static void __init csb726_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
+/* __raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
+/* __raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
+ __raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ pxa_set_mci_info(&csb726_mci);
+ pxa_set_ohci_info(&csb726_ohci_platform_data);
+ pxa_set_ac97_info(NULL);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(CSB726, "Cogent CSB726")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_machine = csb726_init,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/csb726.h b/arch/arm/mach-pxa/csb726.h
new file mode 100644
index 0000000..f1f2a78
--- /dev/null
+++ b/arch/arm/mach-pxa/csb726.h
@@ -0,0 +1,28 @@
+/*
+ * Support for Cogent CSB726
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef CSB726_H
+#define CSB726_H
+
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+
+#define CSB726_GPIO_IRQ_LAN 52
+#define CSB726_GPIO_IRQ_SM501 53
+#define CSB726_GPIO_MMC_DETECT 100
+#define CSB726_GPIO_MMC_RO 101
+
+#define CSB726_FLASH_SIZE (64 * 1024 * 1024)
+#define CSB726_FLASH_uMON (8 * 1024 * 1024)
+
+#define CSB726_IRQ_LAN PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN)
+#define CSB726_IRQ_SM501 PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501)
+
+#endif
+
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
new file mode 100644
index 0000000..a24783a
--- /dev/null
+++ b/arch/arm/mach-pxa/devices.c
@@ -0,0 +1,1112 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clkdev.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include "udc.h"
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <mach/irqs.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/media/camera-pxa.h>
+#include <mach/audio.h>
+#include <mach/hardware.h>
+#include <linux/platform_data/mmp_dma.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+
+#include "devices.h"
+#include "generic.h"
+
+void __init pxa_register_device(struct platform_device *dev, void *data)
+{
+ int ret;
+
+ dev->dev.platform_data = data;
+
+ ret = platform_device_register(dev);
+ if (ret)
+ dev_err(&dev->dev, "unable to register device: %d\n", ret);
+}
+
+static struct resource pxa_resource_pmu = {
+ .start = IRQ_PMU,
+ .end = IRQ_PMU,
+ .flags = IORESOURCE_IRQ,
+};
+
+struct platform_device pxa_device_pmu = {
+ .name = "xscale-pmu",
+ .id = -1,
+ .resource = &pxa_resource_pmu,
+ .num_resources = 1,
+};
+
+static struct resource pxamci_resources[] = {
+ [0] = {
+ .start = 0x41100000,
+ .end = 0x41100fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MMC,
+ .end = IRQ_MMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxamci_dmamask = 0xffffffffUL;
+
+struct platform_device pxa_device_mci = {
+ .name = "pxa2xx-mci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &pxamci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxamci_resources),
+ .resource = pxamci_resources,
+};
+
+void __init pxa_set_mci_info(struct pxamci_platform_data *info)
+{
+ pxa_register_device(&pxa_device_mci, info);
+}
+
+
+static struct pxa2xx_udc_mach_info pxa_udc_info = {
+ .gpio_pullup = -1,
+};
+
+void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
+{
+ memcpy(&pxa_udc_info, info, sizeof *info);
+}
+
+static struct resource pxa2xx_udc_resources[] = {
+ [0] = {
+ .start = 0x40600000,
+ .end = 0x4060ffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USB,
+ .end = IRQ_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 udc_dma_mask = ~(u32)0;
+
+struct platform_device pxa25x_device_udc = {
+ .name = "pxa25x-udc",
+ .id = -1,
+ .resource = pxa2xx_udc_resources,
+ .num_resources = ARRAY_SIZE(pxa2xx_udc_resources),
+ .dev = {
+ .platform_data = &pxa_udc_info,
+ .dma_mask = &udc_dma_mask,
+ }
+};
+
+struct platform_device pxa27x_device_udc = {
+ .name = "pxa27x-udc",
+ .id = -1,
+ .resource = pxa2xx_udc_resources,
+ .num_resources = ARRAY_SIZE(pxa2xx_udc_resources),
+ .dev = {
+ .platform_data = &pxa_udc_info,
+ .dma_mask = &udc_dma_mask,
+ }
+};
+
+#ifdef CONFIG_PXA3xx
+static struct resource pxa3xx_u2d_resources[] = {
+ [0] = {
+ .start = 0x54100000,
+ .end = 0x54100fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USB2,
+ .end = IRQ_USB2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_u2d = {
+ .name = "pxa3xx-u2d",
+ .id = -1,
+ .resource = pxa3xx_u2d_resources,
+ .num_resources = ARRAY_SIZE(pxa3xx_u2d_resources),
+};
+
+void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_u2d, info);
+}
+#endif /* CONFIG_PXA3xx */
+
+static struct resource pxafb_resources[] = {
+ [0] = {
+ .start = 0x44000000,
+ .end = 0x4400ffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_LCD,
+ .end = IRQ_LCD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 fb_dma_mask = ~(u64)0;
+
+struct platform_device pxa_device_fb = {
+ .name = "pxa2xx-fb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &fb_dma_mask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxafb_resources),
+ .resource = pxafb_resources,
+};
+
+void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
+{
+ pxa_device_fb.dev.parent = parent;
+ pxa_register_device(&pxa_device_fb, info);
+}
+
+static struct resource pxa_resource_ffuart[] = {
+ {
+ .start = 0x40100000,
+ .end = 0x40100023,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_FFUART,
+ .end = IRQ_FFUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_ffuart = {
+ .name = "pxa2xx-uart",
+ .id = 0,
+ .resource = pxa_resource_ffuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_ffuart),
+};
+
+void __init pxa_set_ffuart_info(void *info)
+{
+ pxa_register_device(&pxa_device_ffuart, info);
+}
+
+static struct resource pxa_resource_btuart[] = {
+ {
+ .start = 0x40200000,
+ .end = 0x40200023,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_BTUART,
+ .end = IRQ_BTUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_btuart = {
+ .name = "pxa2xx-uart",
+ .id = 1,
+ .resource = pxa_resource_btuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_btuart),
+};
+
+void __init pxa_set_btuart_info(void *info)
+{
+ pxa_register_device(&pxa_device_btuart, info);
+}
+
+static struct resource pxa_resource_stuart[] = {
+ {
+ .start = 0x40700000,
+ .end = 0x40700023,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_STUART,
+ .end = IRQ_STUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_stuart = {
+ .name = "pxa2xx-uart",
+ .id = 2,
+ .resource = pxa_resource_stuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_stuart),
+};
+
+void __init pxa_set_stuart_info(void *info)
+{
+ pxa_register_device(&pxa_device_stuart, info);
+}
+
+static struct resource pxa_resource_hwuart[] = {
+ {
+ .start = 0x41600000,
+ .end = 0x4160002F,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_HWUART,
+ .end = IRQ_HWUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_hwuart = {
+ .name = "pxa2xx-uart",
+ .id = 3,
+ .resource = pxa_resource_hwuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_hwuart),
+};
+
+void __init pxa_set_hwuart_info(void *info)
+{
+ if (cpu_is_pxa255())
+ pxa_register_device(&pxa_device_hwuart, info);
+ else
+ pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware");
+}
+
+static struct resource pxai2c_resources[] = {
+ {
+ .start = 0x40301680,
+ .end = 0x403016a3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_I2C,
+ .end = IRQ_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa_device_i2c = {
+ .name = "pxa2xx-i2c",
+ .id = 0,
+ .resource = pxai2c_resources,
+ .num_resources = ARRAY_SIZE(pxai2c_resources),
+};
+
+void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
+{
+ pxa_register_device(&pxa_device_i2c, info);
+}
+
+#ifdef CONFIG_PXA27x
+static struct resource pxa27x_resources_i2c_power[] = {
+ {
+ .start = 0x40f00180,
+ .end = 0x40f001a3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_i2c_power = {
+ .name = "pxa2xx-i2c",
+ .id = 1,
+ .resource = pxa27x_resources_i2c_power,
+ .num_resources = ARRAY_SIZE(pxa27x_resources_i2c_power),
+};
+#endif
+
+static struct resource pxai2s_resources[] = {
+ {
+ .start = 0x40400000,
+ .end = 0x40400083,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_I2S,
+ .end = IRQ_I2S,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa_device_i2s = {
+ .name = "pxa2xx-i2s",
+ .id = -1,
+ .resource = pxai2s_resources,
+ .num_resources = ARRAY_SIZE(pxai2s_resources),
+};
+
+struct platform_device pxa_device_asoc_ssp1 = {
+ .name = "pxa-ssp-dai",
+ .id = 0,
+};
+
+struct platform_device pxa_device_asoc_ssp2= {
+ .name = "pxa-ssp-dai",
+ .id = 1,
+};
+
+struct platform_device pxa_device_asoc_ssp3 = {
+ .name = "pxa-ssp-dai",
+ .id = 2,
+};
+
+struct platform_device pxa_device_asoc_ssp4 = {
+ .name = "pxa-ssp-dai",
+ .id = 3,
+};
+
+struct platform_device pxa_device_asoc_platform = {
+ .name = "pxa-pcm-audio",
+ .id = -1,
+};
+
+static u64 pxaficp_dmamask = ~(u32)0;
+
+static struct resource pxa_ir_resources[] = {
+ [0] = {
+ .start = IRQ_STUART,
+ .end = IRQ_STUART,
+ .flags = IORESOURCE_IRQ,
+ },
+ [1] = {
+ .start = IRQ_ICP,
+ .end = IRQ_ICP,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = 0x40800000,
+ .end = 0x4080001b,
+ .flags = IORESOURCE_MEM,
+ },
+ [4] = {
+ .start = 0x40700000,
+ .end = 0x40700023,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device pxa_device_ficp = {
+ .name = "pxa2xx-ir",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa_ir_resources),
+ .resource = pxa_ir_resources,
+ .dev = {
+ .dma_mask = &pxaficp_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
+{
+ pxa_register_device(&pxa_device_ficp, info);
+}
+
+static struct resource pxa_rtc_resources[] = {
+ [0] = {
+ .start = 0x40900000,
+ .end = 0x40900000 + 0x3b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC1Hz,
+ .end = IRQ_RTC1Hz,
+ .name = "rtc 1Hz",
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_RTCAlrm,
+ .end = IRQ_RTCAlrm,
+ .name = "rtc alarm",
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa_device_rtc = {
+ .name = "pxa-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa_rtc_resources),
+ .resource = pxa_rtc_resources,
+};
+
+struct platform_device sa1100_device_rtc = {
+ .name = "sa1100-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa_rtc_resources),
+ .resource = pxa_rtc_resources,
+};
+
+static struct resource pxa_ac97_resources[] = {
+ [0] = {
+ .start = 0x40500000,
+ .end = 0x40500000 + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device pxa_device_ac97 = {
+ .name = "pxa2xx-ac97",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxa_ac97_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa_ac97_resources),
+ .resource = pxa_ac97_resources,
+};
+
+void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
+{
+ int ret;
+
+ ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:0", "AC97CLK",
+ &pxa_device_ac97.dev);
+ if (ret)
+ pr_err("PXA AC97 clock1 alias error: %d\n", ret);
+
+ ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:1", "AC97CLK",
+ &pxa_device_ac97.dev);
+ if (ret)
+ pr_err("PXA AC97 clock2 alias error: %d\n", ret);
+
+ pxa_register_device(&pxa_device_ac97, ops);
+}
+
+#ifdef CONFIG_PXA25x
+
+static struct resource pxa25x_resource_pwm0[] = {
+ [0] = {
+ .start = 0x40b00000,
+ .end = 0x40b0000f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device pxa25x_device_pwm0 = {
+ .name = "pxa25x-pwm",
+ .id = 0,
+ .resource = pxa25x_resource_pwm0,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_pwm0),
+};
+
+static struct resource pxa25x_resource_pwm1[] = {
+ [0] = {
+ .start = 0x40c00000,
+ .end = 0x40c0000f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device pxa25x_device_pwm1 = {
+ .name = "pxa25x-pwm",
+ .id = 1,
+ .resource = pxa25x_resource_pwm1,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_pwm1),
+};
+
+static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_ssp[] = {
+ [0] = {
+ .start = 0x41000000,
+ .end = 0x4100001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP,
+ .end = IRQ_SSP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa25x_device_ssp = {
+ .name = "pxa25x-ssp",
+ .id = 0,
+ .dev = {
+ .dma_mask = &pxa25x_ssp_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa25x_resource_ssp,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_ssp),
+};
+
+static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_nssp[] = {
+ [0] = {
+ .start = 0x41400000,
+ .end = 0x4140002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_NSSP,
+ .end = IRQ_NSSP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa25x_device_nssp = {
+ .name = "pxa25x-nssp",
+ .id = 1,
+ .dev = {
+ .dma_mask = &pxa25x_nssp_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa25x_resource_nssp,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_nssp),
+};
+
+static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_assp[] = {
+ [0] = {
+ .start = 0x41500000,
+ .end = 0x4150002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_ASSP,
+ .end = IRQ_ASSP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa25x_device_assp = {
+ /* ASSP is basically equivalent to NSSP */
+ .name = "pxa25x-nssp",
+ .id = 2,
+ .dev = {
+ .dma_mask = &pxa25x_assp_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa25x_resource_assp,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_assp),
+};
+#endif /* CONFIG_PXA25x */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+static struct resource pxa27x_resource_camera[] = {
+ [0] = {
+ .start = 0x50000000,
+ .end = 0x50000fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_CAMERA,
+ .end = IRQ_CAMERA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
+
+static struct platform_device pxa27x_device_camera = {
+ .name = "pxa27x-camera",
+ .id = 0, /* This is used to put cameras on this interface */
+ .dev = {
+ .dma_mask = &pxa27x_dma_mask_camera,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa27x_resource_camera),
+ .resource = pxa27x_resource_camera,
+};
+
+void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
+{
+ pxa_register_device(&pxa27x_device_camera, info);
+}
+
+static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ohci[] = {
+ [0] = {
+ .start = 0x4C000000,
+ .end = 0x4C00ff6f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH1,
+ .end = IRQ_USBH1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_ohci = {
+ .name = "pxa27x-ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxa27x_ohci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ohci),
+ .resource = pxa27x_resource_ohci,
+};
+
+void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
+{
+ pxa_register_device(&pxa27x_device_ohci, info);
+}
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+static struct resource pxa27x_resource_keypad[] = {
+ [0] = {
+ .start = 0x41500000,
+ .end = 0x4150004c,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KEYPAD,
+ .end = IRQ_KEYPAD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_keypad = {
+ .name = "pxa27x-keypad",
+ .id = -1,
+ .resource = pxa27x_resource_keypad,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_keypad),
+};
+
+void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+{
+ pxa_register_device(&pxa27x_device_keypad, info);
+}
+
+static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp1[] = {
+ [0] = {
+ .start = 0x41000000,
+ .end = 0x4100003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP,
+ .end = IRQ_SSP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_ssp1 = {
+ .name = "pxa27x-ssp",
+ .id = 0,
+ .dev = {
+ .dma_mask = &pxa27x_ssp1_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp1,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp1),
+};
+
+static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp2[] = {
+ [0] = {
+ .start = 0x41700000,
+ .end = 0x4170003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP2,
+ .end = IRQ_SSP2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_ssp2 = {
+ .name = "pxa27x-ssp",
+ .id = 1,
+ .dev = {
+ .dma_mask = &pxa27x_ssp2_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp2,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp2),
+};
+
+static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp3[] = {
+ [0] = {
+ .start = 0x41900000,
+ .end = 0x4190003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP3,
+ .end = IRQ_SSP3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_ssp3 = {
+ .name = "pxa27x-ssp",
+ .id = 2,
+ .dev = {
+ .dma_mask = &pxa27x_ssp3_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp3,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3),
+};
+
+static struct resource pxa27x_resource_pwm0[] = {
+ [0] = {
+ .start = 0x40b00000,
+ .end = 0x40b0001f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device pxa27x_device_pwm0 = {
+ .name = "pxa27x-pwm",
+ .id = 0,
+ .resource = pxa27x_resource_pwm0,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_pwm0),
+};
+
+static struct resource pxa27x_resource_pwm1[] = {
+ [0] = {
+ .start = 0x40c00000,
+ .end = 0x40c0001f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device pxa27x_device_pwm1 = {
+ .name = "pxa27x-pwm",
+ .id = 1,
+ .resource = pxa27x_resource_pwm1,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_pwm1),
+};
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#ifdef CONFIG_PXA3xx
+static struct resource pxa3xx_resources_mci2[] = {
+ [0] = {
+ .start = 0x42000000,
+ .end = 0x42000fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MMC2,
+ .end = IRQ_MMC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_mci2 = {
+ .name = "pxa2xx-mci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &pxamci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_mci2),
+ .resource = pxa3xx_resources_mci2,
+};
+
+void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_mci2, info);
+}
+
+static struct resource pxa3xx_resources_mci3[] = {
+ [0] = {
+ .start = 0x42500000,
+ .end = 0x42500fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MMC3,
+ .end = IRQ_MMC3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_mci3 = {
+ .name = "pxa2xx-mci",
+ .id = 2,
+ .dev = {
+ .dma_mask = &pxamci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_mci3),
+ .resource = pxa3xx_resources_mci3,
+};
+
+void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_mci3, info);
+}
+
+static struct resource pxa3xx_resources_gcu[] = {
+ {
+ .start = 0x54000000,
+ .end = 0x54000fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_GCU,
+ .end = IRQ_GCU,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+ .name = "pxa3xx-gcu",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
+ .resource = pxa3xx_resources_gcu,
+ .dev = {
+ .dma_mask = &pxa3xx_gcu_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+#endif /* CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA3xx)
+static struct resource pxa3xx_resources_i2c_power[] = {
+ {
+ .start = 0x40f500c0,
+ .end = 0x40f500d3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+ .name = "pxa3xx-pwri2c",
+ .id = 1,
+ .resource = pxa3xx_resources_i2c_power,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
+};
+
+static struct resource pxa3xx_resources_nand[] = {
+ [0] = {
+ .start = 0x43100000,
+ .end = 0x43100053,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_NAND,
+ .end = IRQ_NAND,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+ .name = "pxa3xx-nand",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxa3xx_nand_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_nand),
+ .resource = pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_nand, info);
+}
+
+static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa3xx_resource_ssp4[] = {
+ [0] = {
+ .start = 0x41a00000,
+ .end = 0x41a0003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP4,
+ .end = IRQ_SSP4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*
+ * PXA3xx SSP is basically equivalent to PXA27x.
+ * However, we need to register the device by the correct name in order to
+ * make the driver set the correct internal type, hence we provide specific
+ * platform_devices for each of them.
+ */
+struct platform_device pxa3xx_device_ssp1 = {
+ .name = "pxa3xx-ssp",
+ .id = 0,
+ .dev = {
+ .dma_mask = &pxa27x_ssp1_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp1,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp1),
+};
+
+struct platform_device pxa3xx_device_ssp2 = {
+ .name = "pxa3xx-ssp",
+ .id = 1,
+ .dev = {
+ .dma_mask = &pxa27x_ssp2_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp2,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp2),
+};
+
+struct platform_device pxa3xx_device_ssp3 = {
+ .name = "pxa3xx-ssp",
+ .id = 2,
+ .dev = {
+ .dma_mask = &pxa27x_ssp3_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp3,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3),
+};
+
+struct platform_device pxa3xx_device_ssp4 = {
+ .name = "pxa3xx-ssp",
+ .id = 3,
+ .dev = {
+ .dma_mask = &pxa3xx_ssp4_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa3xx_resource_ssp4,
+ .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
+};
+#endif /* CONFIG_PXA3xx */
+
+struct resource pxa_resource_gpio[] = {
+ {
+ .start = 0x40e00000,
+ .end = 0x40e0ffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_GPIO0,
+ .end = IRQ_GPIO0,
+ .name = "gpio0",
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_GPIO1,
+ .end = IRQ_GPIO1,
+ .name = "gpio1",
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_GPIO_2_x,
+ .end = IRQ_GPIO_2_x,
+ .name = "gpio_mux",
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa25x_device_gpio = {
+#ifdef CONFIG_CPU_PXA26x
+ .name = "pxa26x-gpio",
+#else
+ .name = "pxa25x-gpio",
+#endif
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa_resource_gpio),
+ .resource = pxa_resource_gpio,
+};
+
+struct platform_device pxa27x_device_gpio = {
+ .name = "pxa27x-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa_resource_gpio),
+ .resource = pxa_resource_gpio,
+};
+
+struct platform_device pxa3xx_device_gpio = {
+ .name = "pxa3xx-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa_resource_gpio),
+ .resource = pxa_resource_gpio,
+};
+
+struct platform_device pxa93x_device_gpio = {
+ .name = "pxa93x-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa_resource_gpio),
+ .resource = pxa_resource_gpio,
+};
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+ struct platform_device *pd;
+
+ pd = platform_device_alloc("pxa2xx-spi", id);
+ if (pd == NULL) {
+ printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+ id);
+ return;
+ }
+
+ pd->dev.platform_data = info;
+ platform_device_add(pd);
+}
+
+static struct resource pxa_dma_resource[] = {
+ [0] = {
+ .start = 0x40000000,
+ .end = 0x4000ffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_DMA,
+ .end = IRQ_DMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxadma_dmamask = 0xffffffffUL;
+
+static struct platform_device pxa2xx_pxa_dma = {
+ .name = "pxa-dma",
+ .id = 0,
+ .dev = {
+ .dma_mask = &pxadma_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa_dma_resource),
+ .resource = pxa_dma_resource,
+};
+
+void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata)
+{
+ pxa_register_device(&pxa2xx_pxa_dma, dma_pdata);
+}
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
new file mode 100644
index 0000000..498b07b
--- /dev/null
+++ b/arch/arm/mach-pxa/devices.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#define PDMA_FILTER_PARAM(_prio, _requestor) (&(struct pxad_param) { \
+ .prio = PXAD_PRIO_##_prio, .drcmr = _requestor })
+struct mmp_dma_platdata;
+
+extern struct platform_device pxa_device_pmu;
+extern struct platform_device pxa_device_mci;
+extern struct platform_device pxa3xx_device_mci2;
+extern struct platform_device pxa3xx_device_mci3;
+extern struct platform_device pxa25x_device_udc;
+extern struct platform_device pxa27x_device_udc;
+extern struct platform_device pxa3xx_device_u2d;
+extern struct platform_device pxa_device_fb;
+extern struct platform_device pxa_device_ffuart;
+extern struct platform_device pxa_device_btuart;
+extern struct platform_device pxa_device_stuart;
+extern struct platform_device pxa_device_hwuart;
+extern struct platform_device pxa_device_i2c;
+extern struct platform_device pxa_device_i2s;
+extern struct platform_device pxa_device_ficp;
+extern struct platform_device sa1100_device_rtc;
+extern struct platform_device pxa_device_rtc;
+extern struct platform_device pxa_device_ac97;
+
+extern struct platform_device pxa27x_device_i2c_power;
+extern struct platform_device pxa27x_device_ohci;
+extern struct platform_device pxa27x_device_keypad;
+
+extern struct platform_device pxa25x_device_ssp;
+extern struct platform_device pxa25x_device_nssp;
+extern struct platform_device pxa25x_device_assp;
+extern struct platform_device pxa27x_device_ssp1;
+extern struct platform_device pxa27x_device_ssp2;
+extern struct platform_device pxa27x_device_ssp3;
+extern struct platform_device pxa3xx_device_ssp1;
+extern struct platform_device pxa3xx_device_ssp2;
+extern struct platform_device pxa3xx_device_ssp3;
+extern struct platform_device pxa3xx_device_ssp4;
+
+extern struct platform_device pxa25x_device_pwm0;
+extern struct platform_device pxa25x_device_pwm1;
+extern struct platform_device pxa27x_device_pwm0;
+extern struct platform_device pxa27x_device_pwm1;
+
+extern struct platform_device pxa3xx_device_nand;
+extern struct platform_device pxa3xx_device_i2c_power;
+
+extern struct platform_device pxa3xx_device_gcu;
+
+extern struct platform_device pxa_device_asoc_platform;
+extern struct platform_device pxa_device_asoc_ssp1;
+extern struct platform_device pxa_device_asoc_ssp2;
+extern struct platform_device pxa_device_asoc_ssp3;
+extern struct platform_device pxa_device_asoc_ssp4;
+
+extern struct platform_device pxa25x_device_gpio;
+extern struct platform_device pxa27x_device_gpio;
+extern struct platform_device pxa3xx_device_gpio;
+extern struct platform_device pxa93x_device_gpio;
+
+void __init pxa_register_device(struct platform_device *dev, void *data);
+void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata);
+
+struct i2c_pxa_platform_data;
+extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
+#ifdef CONFIG_PXA27x
+extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+#ifdef CONFIG_PXA3xx
+extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
new file mode 100644
index 0000000..29be04c
--- /dev/null
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -0,0 +1,1301 @@
+/*
+ * Support for CompuLab EM-X270 platform
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <linux/dm9000.h>
+#include <linux/platform_data/rtc-v3020.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+#include <linux/spi/libertas_spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/regulator/userspace-consumer.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/media/camera-pxa.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/* EM-X270 specific GPIOs */
+#define GPIO13_MMC_CD (13)
+#define GPIO95_MMC_WP (95)
+#define GPIO56_NAND_RB (56)
+#define GPIO93_CAM_RESET (93)
+#define GPIO16_USB_HUB_RESET (16)
+
+/* eXeda specific GPIOs */
+#define GPIO114_MMC_CD (114)
+#define GPIO20_NAND_RB (20)
+#define GPIO38_SD_PWEN (38)
+#define GPIO37_WLAN_RST (37)
+#define GPIO95_TOUCHPAD_INT (95)
+#define GPIO130_CAM_RESET (130)
+#define GPIO10_USB_HUB_RESET (10)
+
+/* common GPIOs */
+#define GPIO11_NAND_CS (11)
+#define GPIO41_ETHIRQ (41)
+#define EM_X270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
+#define GPIO115_WLAN_PWEN (115)
+#define GPIO19_WLAN_STRAP (19)
+#define GPIO9_USB_VBUS_EN (9)
+
+static int mmc_cd;
+static int nand_rb;
+static int dm9000_flags;
+static int cam_reset;
+static int usb_hub_reset;
+
+static unsigned long common_pin_config[] = {
+ /* AC'97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO98_AC97_SYSCLK,
+ GPIO113_AC97_nRESET,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* MCI controller */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* QCI */
+ GPIO84_CIF_FV,
+ GPIO25_CIF_LV,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO81_CIF_DD_0,
+ GPIO55_CIF_DD_1,
+ GPIO51_CIF_DD_2,
+ GPIO50_CIF_DD_3,
+ GPIO52_CIF_DD_4,
+ GPIO48_CIF_DD_5,
+ GPIO17_CIF_DD_6,
+ GPIO12_CIF_DD_7,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* Keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+ GPIO96_KP_MKOUT_6,
+ GPIO22_KP_MKOUT_7,
+
+ /* SSP1 */
+ GPIO26_SSP1_RXD,
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO57_SSP1_TXD,
+
+ /* SSP2 */
+ GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
+ GPIO14_GPIO,
+ GPIO89_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+
+ /* SDRAM and local bus */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO49_nPWE,
+ GPIO18_RDY,
+
+ /* GPIO */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */
+
+ /* power controls */
+ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
+ GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
+
+ /* NAND controls */
+ GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
+
+ /* interrupts */
+ GPIO41_GPIO, /* DM9000 interrupt */
+};
+
+static unsigned long em_x270_pin_config[] = {
+ GPIO13_GPIO, /* MMC card detect */
+ GPIO16_GPIO, /* USB hub reset */
+ GPIO56_GPIO, /* NAND Ready/Busy */
+ GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
+ GPIO95_GPIO, /* MMC Write protect */
+};
+
+static unsigned long exeda_pin_config[] = {
+ GPIO10_GPIO, /* USB hub reset */
+ GPIO20_GPIO, /* NAND Ready/Busy */
+ GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */
+ GPIO95_GPIO, /* touchpad IRQ */
+ GPIO114_GPIO, /* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
+ [0] = {
+ .start = PXA_CS2_PHYS,
+ .end = PXA_CS2_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS2_PHYS + 8,
+ .end = PXA_CS2_PHYS + 8 + 0x3f,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = EM_X270_ETHIRQ,
+ .end = EM_X270_ETHIRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
+ .flags = DM9000_PLATF_NO_EEPROM,
+};
+
+static struct platform_device em_x270_dm9000 = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(em_x270_dm9000_resource),
+ .resource = em_x270_dm9000_resource,
+ .dev = {
+ .platform_data = &em_x270_dm9000_platdata,
+ }
+};
+
+static void __init em_x270_init_dm9000(void)
+{
+ em_x270_dm9000_platdata.flags |= dm9000_flags;
+ platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+static struct resource em_x270_v3020_resource[] = {
+ [0] = {
+ .start = PXA_CS4_PHYS,
+ .end = PXA_CS4_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct v3020_platform_data em_x270_v3020_platdata = {
+ .leftshift = 0,
+};
+
+static struct platform_device em_x270_rtc = {
+ .name = "v3020",
+ .num_resources = ARRAY_SIZE(em_x270_v3020_resource),
+ .resource = em_x270_v3020_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &em_x270_v3020_platdata,
+ }
+};
+
+static void __init em_x270_init_rtc(void)
+{
+ platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
+
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+static inline void nand_cs_on(void)
+{
+ gpio_set_value(GPIO11_NAND_CS, 0);
+}
+
+static void nand_cs_off(void)
+{
+ dsb();
+
+ gpio_set_value(GPIO11_NAND_CS, 1);
+}
+
+/* hardware specific access to control-lines */
+static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd_to_nand(mtd);
+ unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+ dsb();
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_ALE)
+ nandaddr |= (1 << 3);
+ else
+ nandaddr &= ~(1 << 3);
+ if (ctrl & NAND_CLE)
+ nandaddr |= (1 << 2);
+ else
+ nandaddr &= ~(1 << 2);
+ if (ctrl & NAND_NCE)
+ nand_cs_on();
+ else
+ nand_cs_off();
+ }
+
+ dsb();
+ this->IO_ADDR_W = (void __iomem *)nandaddr;
+ if (dat != NAND_CMD_NONE)
+ writel(dat, this->IO_ADDR_W);
+
+ dsb();
+}
+
+/* read device ready pin */
+static int em_x270_nand_device_ready(struct mtd_info *mtd)
+{
+ dsb();
+
+ return gpio_get_value(nand_rb);
+}
+
+static struct mtd_partition em_x270_partition_info[] = {
+ [0] = {
+ .name = "em_x270-0",
+ .offset = 0,
+ .size = SZ_4M,
+ },
+ [1] = {
+ .name = "em_x270-1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+struct platform_nand_data em_x270_nand_platdata = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(em_x270_partition_info),
+ .partitions = em_x270_partition_info,
+ .chip_delay = 20,
+ },
+ .ctrl = {
+ .dev_ready = em_x270_nand_device_ready,
+ .select_chip = 0,
+ .cmd_ctrl = em_x270_nand_cmd_ctl,
+ },
+};
+
+static struct resource em_x270_nand_resource[] = {
+ [0] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + 12,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device em_x270_nand = {
+ .name = "gen_nand",
+ .num_resources = ARRAY_SIZE(em_x270_nand_resource),
+ .resource = em_x270_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &em_x270_nand_platdata,
+ }
+};
+
+static void __init em_x270_init_nand(void)
+{
+ int err;
+
+ err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+ if (err) {
+ pr_warn("EM-X270: failed to request NAND CS gpio\n");
+ return;
+ }
+
+ gpio_direction_output(GPIO11_NAND_CS, 1);
+
+ err = gpio_request(nand_rb, "NAND R/B");
+ if (err) {
+ pr_warn("EM-X270: failed to request NAND R/B gpio\n");
+ gpio_free(GPIO11_NAND_CS);
+ return;
+ }
+
+ gpio_direction_input(nand_rb);
+
+ platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition em_x270_nor_parts[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00050000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Environment",
+ .offset = 0x00050000,
+ .size = 0x00010000,
+ }, {
+ .name = "Reserved",
+ .offset = 0x00060000,
+ .size = 0x00050000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Splashscreen",
+ .offset = 0x000b0000,
+ .size = 0x00050000,
+ }
+};
+
+static struct physmap_flash_data em_x270_nor_data[] = {
+ [0] = {
+ .width = 2,
+ .parts = em_x270_nor_parts,
+ .nr_parts = ARRAY_SIZE(em_x270_nor_parts),
+ },
+};
+
+static struct resource em_x270_nor_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device em_x270_physmap_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &em_x270_nor_flash_resource,
+ .dev = {
+ .platform_data = &em_x270_nor_data,
+ },
+};
+
+static void __init em_x270_init_nor(void)
+{
+ platform_device_register(&em_x270_physmap_flash);
+}
+#else
+static inline void em_x270_init_nor(void) {}
+#endif
+
+/* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct regulator *em_x270_usb_ldo;
+
+static int em_x270_usb_hub_init(void)
+{
+ int err;
+
+ em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
+ if (IS_ERR(em_x270_usb_ldo))
+ return PTR_ERR(em_x270_usb_ldo);
+
+ err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
+ if (err)
+ goto err_free_usb_ldo;
+
+ err = gpio_request(usb_hub_reset, "hub rst");
+ if (err)
+ goto err_free_vbus_gpio;
+
+ /* USB Hub power-on and reset */
+ gpio_direction_output(usb_hub_reset, 1);
+ gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
+ err = regulator_enable(em_x270_usb_ldo);
+ if (err)
+ goto err_free_rst_gpio;
+
+ gpio_set_value(usb_hub_reset, 0);
+ gpio_set_value(usb_hub_reset, 1);
+ regulator_disable(em_x270_usb_ldo);
+ err = regulator_enable(em_x270_usb_ldo);
+ if (err)
+ goto err_free_rst_gpio;
+
+ gpio_set_value(usb_hub_reset, 0);
+ gpio_set_value(GPIO9_USB_VBUS_EN, 1);
+
+ return 0;
+
+err_free_rst_gpio:
+ gpio_free(usb_hub_reset);
+err_free_vbus_gpio:
+ gpio_free(GPIO9_USB_VBUS_EN);
+err_free_usb_ldo:
+ regulator_put(em_x270_usb_ldo);
+
+ return err;
+}
+
+static int em_x270_ohci_init(struct device *dev)
+{
+ int err;
+
+ /* we don't want to entirely disable USB if the HUB init failed */
+ err = em_x270_usb_hub_init();
+ if (err)
+ pr_err("USB Hub initialization failed: %d\n", err);
+
+ /* enable port 2 transiever */
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
+
+ return 0;
+}
+
+static void em_x270_ohci_exit(struct device *dev)
+{
+ gpio_free(usb_hub_reset);
+ gpio_free(GPIO9_USB_VBUS_EN);
+
+ if (!IS_ERR(em_x270_usb_ldo)) {
+ if (regulator_is_enabled(em_x270_usb_ldo))
+ regulator_disable(em_x270_usb_ldo);
+
+ regulator_put(em_x270_usb_ldo);
+ }
+}
+
+static struct pxaohci_platform_data em_x270_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+ .init = em_x270_ohci_init,
+ .exit = em_x270_ohci_exit,
+};
+
+static void __init em_x270_init_ohci(void)
+{
+ pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
+
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct regulator *em_x270_sdio_ldo;
+
+static int em_x270_mci_init(struct device *dev,
+ irq_handler_t em_x270_detect_int,
+ void *data)
+{
+ int err;
+
+ em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
+ if (IS_ERR(em_x270_sdio_ldo)) {
+ dev_err(dev, "can't request SDIO power supply: %ld\n",
+ PTR_ERR(em_x270_sdio_ldo));
+ return PTR_ERR(em_x270_sdio_ldo);
+ }
+
+ err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
+ goto err_irq;
+ }
+
+ if (machine_is_em_x270()) {
+ err = gpio_request(GPIO95_MMC_WP, "MMC WP");
+ if (err) {
+ dev_err(dev, "can't request MMC write protect: %d\n",
+ err);
+ goto err_gpio_wp;
+ }
+ gpio_direction_input(GPIO95_MMC_WP);
+ } else {
+ err = gpio_request(GPIO38_SD_PWEN, "sdio power");
+ if (err) {
+ dev_err(dev, "can't request MMC power control : %d\n",
+ err);
+ goto err_gpio_wp;
+ }
+ gpio_direction_output(GPIO38_SD_PWEN, 1);
+ }
+
+ return 0;
+
+err_gpio_wp:
+ free_irq(gpio_to_irq(mmc_cd), data);
+err_irq:
+ regulator_put(em_x270_sdio_ldo);
+
+ return err;
+}
+
+static int em_x270_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask) {
+ int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
+
+ regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
+ return regulator_enable(em_x270_sdio_ldo);
+ } else {
+ regulator_disable(em_x270_sdio_ldo);
+ }
+ return 0;
+}
+
+static void em_x270_mci_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(mmc_cd), data);
+ regulator_put(em_x270_sdio_ldo);
+
+ if (machine_is_em_x270())
+ gpio_free(GPIO95_MMC_WP);
+ else
+ gpio_free(GPIO38_SD_PWEN);
+}
+
+static int em_x270_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO95_MMC_WP);
+}
+
+static struct pxamci_platform_data em_x270_mci_platform_data = {
+ .detect_delay_ms = 250,
+ .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+ MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+ MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+ MMC_VDD_30_31|MMC_VDD_31_32,
+ .init = em_x270_mci_init,
+ .setpower = em_x270_mci_setpower,
+ .exit = em_x270_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+static void __init em_x270_init_mmc(void)
+{
+ if (machine_is_em_x270())
+ em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+
+ pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
+/* LCD */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info em_x270_lcd_modes[] = {
+ [0] = {
+ .pixclock = 38250,
+ .bpp = 16,
+ .xres = 480,
+ .yres = 640,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 24,
+ .lower_margin = 4,
+ .sync = 0,
+ },
+ [1] = {
+ .pixclock = 153800,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 88,
+ .lower_margin = 2,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info em_x270_lcd = {
+ .modes = em_x270_lcd_modes,
+ .num_modes = 2,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+};
+
+static void __init em_x270_init_lcd(void)
+{
+ pxa_set_fb_info(NULL, &em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master em_x270_spi_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .gpio_cs = -1,
+};
+
+static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
+ .model = TDO35S,
+};
+
+static struct pxa2xx_spi_master em_x270_spi_2_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_libertas_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .timeout = 1000,
+ .gpio_cs = 14,
+};
+
+static unsigned long em_x270_libertas_pin_config[] = {
+ /* SSP2 */
+ GPIO19_SSP2_SCLK,
+ GPIO14_GPIO,
+ GPIO89_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+};
+
+static int em_x270_libertas_setup(struct spi_device *spi)
+{
+ int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
+ if (err)
+ return err;
+
+ err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+ if (err)
+ goto err_free_pwen;
+
+ if (machine_is_exeda()) {
+ err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
+ if (err)
+ goto err_free_strap;
+
+ gpio_direction_output(GPIO37_WLAN_RST, 1);
+ msleep(100);
+ }
+
+ gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+ msleep(100);
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
+
+ gpio_direction_output(GPIO115_WLAN_PWEN, 0);
+ msleep(100);
+ gpio_set_value(GPIO115_WLAN_PWEN, 1);
+ msleep(100);
+
+ spi->bits_per_word = 16;
+ spi_setup(spi);
+
+ return 0;
+
+err_free_strap:
+ gpio_free(GPIO19_WLAN_STRAP);
+err_free_pwen:
+ gpio_free(GPIO115_WLAN_PWEN);
+
+ return err;
+}
+
+static int em_x270_libertas_teardown(struct spi_device *spi)
+{
+ gpio_set_value(GPIO115_WLAN_PWEN, 0);
+ gpio_free(GPIO115_WLAN_PWEN);
+ gpio_free(GPIO19_WLAN_STRAP);
+
+ if (machine_is_exeda()) {
+ gpio_set_value(GPIO37_WLAN_RST, 0);
+ gpio_free(GPIO37_WLAN_RST);
+ }
+
+ return 0;
+}
+
+struct libertas_spi_platform_data em_x270_libertas_pdata = {
+ .use_dummy_writes = 1,
+ .setup = em_x270_libertas_setup,
+ .teardown = em_x270_libertas_teardown,
+};
+
+static struct spi_board_info em_x270_spi_devices[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .controller_data = &em_x270_tdo24m_chip,
+ .platform_data = &em_x270_tdo24m_pdata,
+ },
+ {
+ .modalias = "libertas_spi",
+ .max_speed_hz = 13000000,
+ .bus_num = 2,
+ .irq = PXA_GPIO_TO_IRQ(116),
+ .chip_select = 0,
+ .controller_data = &em_x270_libertas_chip,
+ .platform_data = &em_x270_libertas_pdata,
+ },
+};
+
+static void __init em_x270_init_spi(void)
+{
+ pxa2xx_set_spi_info(1, &em_x270_spi_info);
+ pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
+ spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
+}
+#else
+static inline void em_x270_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static pxa2xx_audio_ops_t em_x270_ac97_info = {
+ .reset_gpio = 113,
+};
+
+static void __init em_x270_init_ac97(void)
+{
+ pxa_set_ac97_info(&em_x270_ac97_info);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int em_x270_module_matrix_keys[] = {
+ KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+ KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+ KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
+
+static struct matrix_keymap_data em_x270_matrix_keymap_data = {
+ .keymap = em_x270_module_matrix_keys,
+ .keymap_size = ARRAY_SIZE(em_x270_module_matrix_keys),
+};
+
+struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
+ /* code map for the matrix keys */
+ .matrix_key_rows = 3,
+ .matrix_key_cols = 3,
+ .matrix_keymap_data = &em_x270_matrix_keymap_data,
+};
+
+static const unsigned int em_x270_exeda_matrix_keys[] = {
+ KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
+ KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
+ KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
+ KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
+
+ KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
+ KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
+ KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
+ KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
+
+ KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
+ KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
+ KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
+ KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
+
+ KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
+ KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
+ KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
+ KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
+
+ KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
+ KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
+ KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
+ KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
+
+ KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
+ KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
+ KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
+ KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
+
+ KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
+ KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
+ KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
+ KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
+
+ KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
+ KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
+ KEY(7, 4, 0), KEY(7, 5, 0),
+ KEY(7, 6, 0), KEY(7, 7, 0),
+};
+
+static struct matrix_keymap_data em_x270_exeda_matrix_keymap_data = {
+ .keymap = em_x270_exeda_matrix_keys,
+ .keymap_size = ARRAY_SIZE(em_x270_exeda_matrix_keys),
+};
+
+struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
+ /* code map for the matrix keys */
+ .matrix_key_rows = 8,
+ .matrix_key_cols = 8,
+ .matrix_keymap_data = &em_x270_exeda_matrix_keymap_data,
+};
+
+static void __init em_x270_init_keypad(void)
+{
+ if (machine_is_em_x270())
+ pxa_set_keypad_info(&em_x270_module_keypad_info);
+ else
+ pxa_set_keypad_info(&em_x270_exeda_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+ [0] = {
+ .desc = "sleep/wakeup",
+ .code = KEY_SUSPEND,
+ .type = EV_PWR,
+ .gpio = 1,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+ .buttons = gpio_keys_button,
+ .nbuttons = 1,
+};
+
+static struct platform_device em_x270_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &em_x270_gpio_keys_data,
+ },
+};
+
+static void __init em_x270_init_gpio_keys(void)
+{
+ platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
+
+/* Quick Capture Interface and sensor setup */
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static int em_x270_sensor_init(void)
+{
+ int ret;
+
+ ret = gpio_request(cam_reset, "camera reset");
+ if (ret)
+ return ret;
+
+ gpio_direction_output(cam_reset, 0);
+ gpio_set_value(cam_reset, 1);
+
+ return 0;
+}
+
+static struct regulator_consumer_supply camera_dummy_supplies[] = {
+ REGULATOR_SUPPLY("vdd", "0-005d"),
+};
+
+static struct regulator_init_data camera_dummy_initdata = {
+ .consumer_supplies = camera_dummy_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct fixed_voltage_config camera_dummy_config = {
+ .supply_name = "camera_vdd",
+ .input_supply = "vcc cam",
+ .microvolts = 2800000,
+ .gpio = -1,
+ .enable_high = 0,
+ .init_data = &camera_dummy_initdata,
+};
+
+static struct platform_device camera_supply_dummy_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &camera_dummy_config,
+ },
+};
+
+struct pxacamera_platform_data em_x270_camera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 2600,
+ .sensor_i2c_adapter_id = 0,
+ .sensor_i2c_address = 0x5d,
+};
+
+static void __init em_x270_init_camera(void)
+{
+ if (em_x270_sensor_init() == 0)
+ pxa_set_camera_info(&em_x270_camera_platform_data);
+ platform_device_register(&camera_supply_dummy_device);
+}
+#else
+static inline void em_x270_init_camera(void) {}
+#endif
+
+static struct regulator_bulk_data em_x270_gps_consumer_supply = {
+ .supply = "vcc gps",
+};
+
+static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
+ .name = "vcc gps",
+ .num_supplies = 1,
+ .supplies = &em_x270_gps_consumer_supply,
+};
+
+static struct platform_device em_x270_gps_userspace_consumer = {
+ .name = "reg-userspace-consumer",
+ .id = 0,
+ .dev = {
+ .platform_data = &em_x270_gps_consumer_data,
+ },
+};
+
+static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
+ .supply = "vcc gprs",
+};
+
+static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
+ .name = "vcc gprs",
+ .num_supplies = 1,
+ .supplies = &em_x270_gprs_consumer_supply
+};
+
+static struct platform_device em_x270_gprs_userspace_consumer = {
+ .name = "reg-userspace-consumer",
+ .id = 1,
+ .dev = {
+ .platform_data = &em_x270_gprs_consumer_data,
+ }
+};
+
+static struct platform_device *em_x270_userspace_consumers[] = {
+ &em_x270_gps_userspace_consumer,
+ &em_x270_gprs_userspace_consumer,
+};
+
+static void __init em_x270_userspace_consumers_init(void)
+{
+ platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
+}
+
+/* DA9030 related initializations */
+#define REGULATOR_CONSUMER(_name, _dev_name, _supply) \
+ static struct regulator_consumer_supply _name##_consumers[] = { \
+ REGULATOR_SUPPLY(_supply, _dev_name), \
+ }
+
+REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps");
+REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
+REGULATOR_CONSUMER(ldo10, "pxa2xx-mci", "vcc sdio");
+REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
+REGULATOR_CONSUMER(ldo19, "reg-userspace-consumer.1", "vcc gprs");
+REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
+
+#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
+ static struct regulator_init_data _ldo##_data = { \
+ .constraints = { \
+ .min_uV = _min_uV, \
+ .max_uV = _max_uV, \
+ .state_mem = { \
+ .enabled = 0, \
+ }, \
+ .valid_ops_mask = _ops_mask, \
+ .apply_uV = 1, \
+ }, \
+ .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \
+ .consumer_supplies = _ldo##_consumers, \
+ };
+
+REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo10, 2000000, 3200000,
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
+REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
+
+struct led_info em_x270_led_info = {
+ .name = "em-x270:orange",
+ .default_trigger = "battery-charging-or-full",
+};
+
+struct power_supply_info em_x270_psy_info = {
+ .name = "battery",
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .voltage_max_design = 4200000,
+ .voltage_min_design = 3000000,
+ .use_for_apm = 1,
+};
+
+static void em_x270_battery_low(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+ apm_queue_event(APM_LOW_BATTERY);
+#endif
+}
+
+static void em_x270_battery_critical(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+#endif
+}
+
+struct da9030_battery_info em_x270_batterty_info = {
+ .battery_info = &em_x270_psy_info,
+
+ .charge_milliamp = 1000,
+ .charge_millivolt = 4200,
+
+ .vbat_low = 3600,
+ .vbat_crit = 3400,
+ .vbat_charge_start = 4100,
+ .vbat_charge_stop = 4200,
+ .vbat_charge_restart = 4000,
+
+ .vcharge_min = 3200,
+ .vcharge_max = 5500,
+
+ .tbat_low = 197,
+ .tbat_high = 78,
+ .tbat_restart = 100,
+
+ .batmon_interval = 0,
+
+ .battery_low = em_x270_battery_low,
+ .battery_critical = em_x270_battery_critical,
+};
+
+#define DA9030_SUBDEV(_name, _id, _pdata) \
+ { \
+ .name = "da903x-" #_name, \
+ .id = DA9030_ID_##_id, \
+ .platform_data = _pdata, \
+ }
+
+#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
+
+struct da903x_subdev_info em_x270_da9030_subdevs[] = {
+ DA9030_LDO(3),
+ DA9030_LDO(5),
+ DA9030_LDO(10),
+ DA9030_LDO(12),
+ DA9030_LDO(19),
+
+ DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
+
+ DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
+ DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
+ DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
+};
+
+static struct da903x_platform_data em_x270_da9030_info = {
+ .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
+ .subdevs = em_x270_da9030_subdevs,
+};
+
+static struct i2c_board_info em_x270_i2c_pmic_info = {
+ I2C_BOARD_INFO("da9030", 0x49),
+ .irq = PXA_GPIO_TO_IRQ(0),
+ .platform_data = &em_x270_da9030_info,
+};
+
+static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
+ .use_pio = 1,
+};
+
+static void __init em_x270_init_da9030(void)
+{
+ pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
+ i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
+}
+
+static struct pca953x_platform_data exeda_gpio_ext_pdata = {
+ .gpio_base = 128,
+};
+
+static struct i2c_board_info exeda_i2c_info[] = {
+ {
+ I2C_BOARD_INFO("pca9555", 0x21),
+ .platform_data = &exeda_gpio_ext_pdata,
+ },
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+ .fast_mode = 1,
+};
+
+static void __init em_x270_init_i2c(void)
+{
+ pxa_set_i2c_info(&em_x270_i2c_info);
+
+ if (machine_is_exeda())
+ i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
+}
+
+static void __init em_x270_module_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+ mmc_cd = GPIO13_MMC_CD;
+ nand_rb = GPIO56_NAND_RB;
+ dm9000_flags = DM9000_PLATF_32BITONLY;
+ cam_reset = GPIO93_CAM_RESET;
+ usb_hub_reset = GPIO16_USB_HUB_RESET;
+}
+
+static void __init em_x270_exeda_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
+
+ mmc_cd = GPIO114_MMC_CD;
+ nand_rb = GPIO20_NAND_RB;
+ dm9000_flags = DM9000_PLATF_16BITONLY;
+ cam_reset = GPIO130_CAM_RESET;
+ usb_hub_reset = GPIO10_USB_HUB_RESET;
+}
+
+static void __init em_x270_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+#ifdef CONFIG_PM
+ pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
+ if (machine_is_em_x270())
+ em_x270_module_init();
+ else if (machine_is_exeda())
+ em_x270_exeda_init();
+ else
+ panic("Unsupported machine: %d\n", machine_arch_type);
+
+ em_x270_init_da9030();
+ em_x270_init_dm9000();
+ em_x270_init_rtc();
+ em_x270_init_nand();
+ em_x270_init_nor();
+ em_x270_init_lcd();
+ em_x270_init_mmc();
+ em_x270_init_ohci();
+ em_x270_init_keypad();
+ em_x270_init_gpio_keys();
+ em_x270_init_ac97();
+ em_x270_init_spi();
+ em_x270_init_i2c();
+ em_x270_init_camera();
+ em_x270_userspace_consumers_init();
+
+ regulator_has_full_constraints();
+}
+
+MACHINE_START(EM_X270, "Compulab EM-X270")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = em_x270_init,
+ .restart = pxa_restart,
+MACHINE_END
+
+MACHINE_START(EXEDA, "Compulab eXeda")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = em_x270_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries-irq.h b/arch/arm/mach-pxa/eseries-irq.h
new file mode 100644
index 0000000..de292b2
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries-irq.h
@@ -0,0 +1,28 @@
+/*
+ * eseries-irq.h
+ *
+ * Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
+#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
+
+#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
+#define ANGELX_ST0_IRQ IRQ_ANGELX(1)
+#define ANGELX_CD0_IRQ IRQ_ANGELX(2)
+#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
+#define ANGELX_ST1_IRQ IRQ_ANGELX(4)
+#define ANGELX_CD1_IRQ IRQ_ANGELX(5)
+
+#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
+#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
+
+#define TMIO_SD_IRQ IRQ_TMIO(1)
+#define TMIO_USB_IRQ IRQ_TMIO(2)
+
+#define ESERIES_NR_IRQS (IRQ_BOARD_START + 16)
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
new file mode 100644
index 0000000..91f7c3e
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries.c
@@ -0,0 +1,968 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/clkdev.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk-provider.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tc6387xb.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/t7l66xb.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/memblock.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "pxa25x.h"
+#include <mach/eseries-gpio.h>
+#include "eseries-irq.h"
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include "udc.h"
+#include <linux/platform_data/irda-pxaficp.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Only e800 has 128MB RAM */
+void __init eseries_fixup(struct tag *tags, char **cmdline)
+{
+ if (machine_is_e800())
+ memblock_add(0xa0000000, SZ_128M);
+ else
+ memblock_add(0xa0000000, SZ_64M);
+}
+
+struct gpio_vbus_mach_info e7xx_udc_info = {
+ .gpio_vbus = GPIO_E7XX_USB_DISC,
+ .gpio_pullup = GPIO_E7XX_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
+
+static struct platform_device e7xx_gpio_vbus __maybe_unused = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &e7xx_udc_info,
+ },
+};
+
+struct pxaficp_platform_data e7xx_ficp_platform_data = {
+ .gpio_pwdown = GPIO_E7XX_IR_OFF,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+int eseries_tmio_enable(struct platform_device *dev)
+{
+ /* Reset - bring SUSPEND high before PCLR */
+ gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+ gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+ msleep(1);
+ gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+ msleep(1);
+ gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
+ msleep(1);
+ return 0;
+}
+
+int eseries_tmio_disable(struct platform_device *dev)
+{
+ gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+ gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+ return 0;
+}
+
+int eseries_tmio_suspend(struct platform_device *dev)
+{
+ gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+ return 0;
+}
+
+int eseries_tmio_resume(struct platform_device *dev)
+{
+ gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+ msleep(1);
+ return 0;
+}
+
+void eseries_get_tmio_gpios(void)
+{
+ gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
+ gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
+ gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
+ gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
+}
+
+/* TMIO controller uses the same resources on all e-series machines. */
+struct resource eseries_tmio_resources[] = {
+ [0] = {
+ .start = PXA_CS4_PHYS,
+ .end = PXA_CS4_PHYS + 0x1fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* Some e-series hardware cannot control the 32K clock */
+static void __init __maybe_unused eseries_register_clks(void)
+{
+ clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, 0, 32768);
+}
+
+#ifdef CONFIG_MACH_E330
+/* -------------------- e330 tc6387xb parameters -------------------- */
+
+static struct tc6387xb_platform_data e330_tc6387xb_info = {
+ .enable = &eseries_tmio_enable,
+ .disable = &eseries_tmio_disable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+};
+
+static struct platform_device e330_tc6387xb_device = {
+ .name = "tc6387xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e330_tc6387xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* --------------------------------------------------------------- */
+
+static struct platform_device *e330_devices[] __initdata = {
+ &e330_tc6387xb_device,
+ &e7xx_gpio_vbus,
+};
+
+static void __init e330_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ eseries_register_clks();
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e330_devices));
+}
+
+MACHINE_START(E330, "Toshiba e330")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .atag_offset = 0x100,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e330_init,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E350
+/* -------------------- e350 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e350_t7l66xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .enable = &eseries_tmio_enable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+};
+
+static struct platform_device e350_t7l66xb_device = {
+ .name = "t7l66xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e350_t7l66xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e350_devices[] __initdata = {
+ &e350_t7l66xb_device,
+ &e7xx_gpio_vbus,
+};
+
+static void __init e350_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ eseries_register_clks();
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e350_devices));
+}
+
+MACHINE_START(E350, "Toshiba e350")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .atag_offset = 0x100,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e350_init,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+ .pixclock = 140703,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 28,
+ .right_margin = 8,
+ .vsync_len = 3,
+ .upper_margin = 5,
+ .lower_margin = 6,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+ .modes = &e400_pxafb_mode_info,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+ .lccr3 = 0,
+ .pxafb_backlight_power = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+
+ /* TMIO controller */
+ GPIO19_GPIO, /* t7l66xb #PCLR */
+ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static struct mtd_partition partition_a = {
+ .name = "Internal NAND flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data e400_t7l66xb_nand_config = {
+ .num_partitions = 1,
+ .partition = &partition_a,
+ .badblock_pattern = &e400_t7l66xb_nand_bbt,
+};
+
+static struct t7l66xb_platform_data e400_t7l66xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .enable = &eseries_tmio_enable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+
+ .nand_data = &e400_t7l66xb_nand_config,
+};
+
+static struct platform_device e400_t7l66xb_device = {
+ .name = "t7l66xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e400_t7l66xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e400_devices[] __initdata = {
+ &e400_t7l66xb_device,
+ &e7xx_gpio_vbus,
+};
+
+static void __init e400_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ /* Fixme - e400 may have a switched clock */
+ eseries_register_clks();
+ eseries_get_tmio_gpios();
+ pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
+ platform_add_devices(ARRAY_AND_SIZE(e400_devices));
+}
+
+MACHINE_START(E400, "Toshiba e400")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .atag_offset = 0x100,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e400_init,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+ .lcd_format = 0x00008023,
+ .lcdd_cntl1 = 0x0f000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00ffff03,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 20,
+ .right_margin = 28,
+ .upper_margin = 9,
+ .lower_margin = 8,
+ .crtc_ss = 0x80140013,
+ .crtc_ls = 0x81150110,
+ .crtc_gs = 0x80050005,
+ .crtc_vpos_gs = 0x000a0009,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa906000a,
+ .crtc_gclk = 0x80050108,
+ .crtc_goe = 0x80050108,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+ .crtc_ps1_active = 0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+ .init_data1 = 0x21002103,
+ .gpio_dir1 = 0xffffdeff,
+ .gpio_oe1 = 0x03c00643,
+ .init_data2 = 0x003f003f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+ .modelist = &e740_lcd_mode,
+ .num_modes = 1,
+ .regs = &e740_lcd_regs,
+ .gpio = &e740_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device e740_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e740_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e740_fb_resources),
+ .resource = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - IMAGEON */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+
+ /* TMIO controller */
+ GPIO19_GPIO, /* t7l66xb #PCLR */
+ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+ /* UDC */
+ GPIO13_GPIO,
+ GPIO3_GPIO,
+
+ /* IrDA */
+ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* Audio power control */
+ GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
+ GPIO40_GPIO, /* Mic amp power */
+ GPIO41_GPIO, /* Headphone amp power */
+
+ /* PC Card */
+ GPIO8_GPIO, /* CD0 */
+ GPIO44_GPIO, /* CD1 */
+ GPIO11_GPIO, /* IRQ0 */
+ GPIO6_GPIO, /* IRQ1 */
+ GPIO27_GPIO, /* RST0 */
+ GPIO24_GPIO, /* RST1 */
+ GPIO20_GPIO, /* PWR0 */
+ GPIO23_GPIO, /* PWR1 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* -------------------- e740 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e740_t7l66xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .enable = &eseries_tmio_enable,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+};
+
+static struct platform_device e740_t7l66xb_device = {
+ .name = "t7l66xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e740_t7l66xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+static struct platform_device e740_audio_device = {
+ .name = "e740-audio",
+ .id = -1,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e740_devices[] __initdata = {
+ &e740_fb_device,
+ &e740_t7l66xb_device,
+ &e7xx_gpio_vbus,
+ &e740_audio_device,
+};
+
+static void __init e740_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ eseries_register_clks();
+ clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
+ "UDCCLK", &pxa25x_device_udc.dev),
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e740_devices));
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .atag_offset = 0x100,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e740_init,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+ .lcd_format = 0x00008003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00fff003,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 21,
+ .right_margin = 22,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0x8014000d,
+ .crtc_gs = 0xc1000005,
+ .crtc_vpos_gs = 0x00020147,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x80cc0015,
+ .crtc_goe = 0x80cc0015,
+ .crtc_ps1_active = 0x61060017,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+ .init_data1 = 0x01192f1b,
+ .gpio_dir1 = 0xd5ffdeff,
+ .gpio_oe1 = 0x000020bf,
+ .init_data2 = 0x010f010f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+ .modelist = &e750_lcd_mode,
+ .num_modes = 1,
+ .regs = &e750_lcd_regs,
+ .gpio = &e750_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device e750_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e750_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e750_fb_resources),
+ .resource = e750_fb_resources,
+};
+
+/* -------------------- e750 MFP parameters -------------------- */
+
+static unsigned long e750_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - IMAGEON */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO11_3_6MHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+
+ /* TMIO controller */
+ GPIO19_GPIO, /* t7l66xb #PCLR */
+ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+ /* UDC */
+ GPIO13_GPIO,
+ GPIO3_GPIO,
+
+ /* IrDA */
+ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* Audio power control */
+ GPIO4_GPIO, /* Headphone amp power */
+ GPIO7_GPIO, /* Speaker amp power */
+ GPIO37_GPIO, /* Headphone detect */
+
+ /* PC Card */
+ GPIO8_GPIO, /* CD0 */
+ GPIO44_GPIO, /* CD1 */
+ /* GPIO11_GPIO, IRQ0 */
+ GPIO6_GPIO, /* IRQ1 */
+ GPIO27_GPIO, /* RST0 */
+ GPIO24_GPIO, /* RST1 */
+ GPIO20_GPIO, /* PWR0 */
+ GPIO23_GPIO, /* PWR1 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------- e750 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e750_tc6393xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .scr_pll2cr = 0x0cc1,
+ .scr_gper = 0,
+ .gpio_base = -1,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+ .enable = &eseries_tmio_enable,
+ .disable = &eseries_tmio_disable,
+};
+
+static struct platform_device e750_tc6393xb_device = {
+ .name = "tc6393xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e750_tc6393xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+static struct platform_device e750_audio_device = {
+ .name = "e750-audio",
+ .id = -1,
+};
+
+/* ------------------------------------------------------------- */
+
+static struct platform_device *e750_devices[] __initdata = {
+ &e750_fb_device,
+ &e750_tc6393xb_device,
+ &e7xx_gpio_vbus,
+ &e750_audio_device,
+};
+
+static void __init e750_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
+ "GPIO11_CLK", NULL),
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e750_devices));
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E750, "Toshiba e750")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .atag_offset = 0x100,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e750_init,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static unsigned long e800_pin_config[] __initdata = {
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* tc6393xb */
+ GPIO11_3_6MHz,
+};
+
+static struct w100_gen_regs e800_lcd_regs = {
+ .lcd_format = 0x00008003,
+ .lcdd_cntl1 = 0x02a00000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x000ff2a3,
+ .genlcd_cntl2 = 0x000002a3,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+ [0] = {
+ .xres = 480,
+ .yres = 640,
+ .left_margin = 52,
+ .right_margin = 148,
+ .upper_margin = 2,
+ .lower_margin = 6,
+ .crtc_ss = 0x80350034,
+ .crtc_ls = 0x802b0026,
+ .crtc_gs = 0x80160016,
+ .crtc_vpos_gs = 0x00020003,
+ .crtc_rev = 0x0040001d,
+ .crtc_dclk = 0xe0000000,
+ .crtc_gclk = 0x82a50049,
+ .crtc_goe = 0x80ee001c,
+ .crtc_ps1_active = 0x00000000,
+ .pll_freq = 128,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 6,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+ },
+ [1] = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 15,
+ .right_margin = 88,
+ .upper_margin = 0,
+ .lower_margin = 7,
+ .crtc_ss = 0xd010000f,
+ .crtc_ls = 0x80070003,
+ .crtc_gs = 0x80000000,
+ .crtc_vpos_gs = 0x01460147,
+ .crtc_rev = 0x00400003,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x814b0008,
+ .crtc_goe = 0x80cc0015,
+ .crtc_ps1_active = 0x00000000,
+ .pll_freq = 100,
+ .pixclk_divider = 6, /* Wince uses 14 which gives a */
+ .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+ }
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+ .init_data1 = 0xc13fc019,
+ .gpio_dir1 = 0x3e40df7f,
+ .gpio_oe1 = 0x003c3000,
+ .init_data2 = 0x00000000,
+ .gpio_dir2 = 0x00000000,
+ .gpio_oe2 = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+ .ext_cntl = 0x09640011,
+ .sdram_mode_reg = 0x00600021,
+ .ext_timing_cntl = 0x10001545,
+ .io_cntl = 0x7ddd7333,
+ .size = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+ unsigned long tmp;
+
+ tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+ if (par->mode->xres == 480)
+ tmp |= 0x100;
+ else
+ tmp &= ~0x100;
+ w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+ .change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+ .modelist = e800_lcd_mode,
+ .num_modes = 2,
+ .regs = &e800_lcd_regs,
+ .gpio = &e800_w100_gpio_info,
+ .mem = &e800_w100_mem_info,
+ .tg = &e800_tg_info,
+ .xtal_freq = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device e800_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e800_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e800_fb_resources),
+ .resource = e800_fb_resources,
+};
+
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct gpio_vbus_mach_info e800_udc_info = {
+ .gpio_vbus = GPIO_E800_USB_DISC,
+ .gpio_pullup = GPIO_E800_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
+
+static struct platform_device e800_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &e800_udc_info,
+ },
+};
+
+
+/* ----------------- e800 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e800_tc6393xb_info = {
+ .irq_base = IRQ_BOARD_START,
+ .scr_pll2cr = 0x0cc1,
+ .scr_gper = 0,
+ .gpio_base = -1,
+ .suspend = &eseries_tmio_suspend,
+ .resume = &eseries_tmio_resume,
+ .enable = &eseries_tmio_enable,
+ .disable = &eseries_tmio_disable,
+};
+
+static struct platform_device e800_tc6393xb_device = {
+ .name = "tc6393xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e800_tc6393xb_info,
+ },
+ .num_resources = 2,
+ .resource = eseries_tmio_resources,
+};
+
+static struct platform_device e800_audio_device = {
+ .name = "e800-audio",
+ .id = -1,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e800_devices[] __initdata = {
+ &e800_fb_device,
+ &e800_tc6393xb_device,
+ &e800_gpio_vbus,
+ &e800_audio_device,
+};
+
+static void __init e800_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
+ "GPIO11_CLK", NULL),
+ eseries_get_tmio_gpios();
+ platform_add_devices(ARRAY_AND_SIZE(e800_devices));
+ pxa_set_ac97_info(NULL);
+}
+
+MACHINE_START(E800, "Toshiba e800")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .atag_offset = 0x100,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = ESERIES_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e800_init,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
new file mode 100644
index 0000000..2c90b58
--- /dev/null
+++ b/arch/arm/mach-pxa/ezx.c
@@ -0,0 +1,1250 @@
+/*
+ * ezx.c - Common code for the EZX platform.
+ *
+ * Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ * 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ * 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds-lp3944.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa27x.h"
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <mach/hardware.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/media/camera-pxa.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define EZX_NR_IRQS (IRQ_BOARD_START + 24)
+
+#define GPIO12_A780_FLIP_LID 12
+#define GPIO15_A1200_FLIP_LID 15
+#define GPIO15_A910_FLIP_LID 15
+#define GPIO12_E680_LOCK_SWITCH 12
+#define GPIO15_E6_LOCK_SWITCH 15
+#define GPIO50_nCAM_EN 50
+#define GPIO19_GEN1_CAM_RST 19
+#define GPIO28_GEN2_CAM_RST 28
+
+static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+ .max_brightness = 1023,
+ .dft_brightness = 1023,
+ .enable_gpio = -1,
+};
+
+static struct platform_device ezx_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &ezx_backlight_data,
+ },
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+ .pixclock = 150000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 10,
+ .left_margin = 20,
+ .right_margin = 10,
+ .vsync_len = 2,
+ .upper_margin = 3,
+ .lower_margin = 2,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 __maybe_unused = {
+ .modes = &mode_ezx_old,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+ .pixclock = 192308,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 32,
+ .depth = 18,
+ .hsync_len = 10,
+ .left_margin = 20,
+ .right_margin = 10,
+ .vsync_len = 2,
+ .upper_margin = 3,
+ .lower_margin = 2,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 __maybe_unused = {
+ .modes = &mode_72r89803y01,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *ezx_devices[] __initdata __maybe_unused = {
+ &ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata __maybe_unused = {
+ /* PWM backlight */
+ GPIO16_PWM0_OUT,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* PCAP SSP */
+ GPIO29_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+ GPIO24_GPIO, /* pcap chip select */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
+ GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
+ GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO11_GPIO, /* mmc detect */
+
+ /* usb to external transceiver */
+ GPIO34_USB_P2_2,
+ GPIO35_USB_P2_1,
+ GPIO36_USB_P2_4,
+ GPIO39_USB_P2_6,
+ GPIO40_USB_P2_5,
+ GPIO53_USB_P2_3,
+
+ /* usb to Neptune GSM chip */
+ GPIO30_USB_P3_2,
+ GPIO31_USB_P3_6,
+ GPIO90_USB_P3_5,
+ GPIO91_USB_P3_1,
+ GPIO56_USB_P3_4,
+ GPIO113_USB_P3_3,
+};
+
+#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
+static unsigned long gen1_pin_config[] __initdata = {
+ /* flip / lockswitch */
+ GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+ /* bluetooth (bcm2035) */
+ GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
+ GPIO48_GPIO, /* RESET */
+ GPIO28_GPIO, /* WAKEUP */
+
+ /* Neptune handshake */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
+ GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
+ GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
+ GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
+ GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
+
+ /* sound */
+ GPIO52_SSP3_SCLK,
+ GPIO83_SSP3_SFRM,
+ GPIO81_SSP3_TXD,
+ GPIO89_SSP3_RXD,
+
+ /* ssp2 pins to in */
+ GPIO22_GPIO, /* SSP2_SCLK */
+ GPIO37_GPIO, /* SSP2_SFRM */
+ GPIO38_GPIO, /* SSP2_TXD */
+ GPIO88_GPIO, /* SSP2_RXD */
+
+ /* camera */
+ GPIO23_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO85_CIF_LV,
+ GPIO84_CIF_FV,
+ GPIO27_CIF_DD_0,
+ GPIO114_CIF_DD_1,
+ GPIO51_CIF_DD_2,
+ GPIO115_CIF_DD_3,
+ GPIO95_CIF_DD_4,
+ GPIO94_CIF_DD_5,
+ GPIO17_CIF_DD_6,
+ GPIO108_CIF_DD_7,
+ GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
+ GPIO19_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
+
+ /* EMU */
+ GPIO120_GPIO, /* EMU_MUX1 */
+ GPIO119_GPIO, /* EMU_MUX2 */
+ GPIO86_GPIO, /* SNP_INT_CTL */
+ GPIO87_GPIO, /* SNP_INT_IN */
+};
+#endif
+
+#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
+ defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
+static unsigned long gen2_pin_config[] __initdata = {
+ /* flip / lockswitch */
+ GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+ /* EOC */
+ GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
+
+ /* bluetooth (bcm2045) */
+ GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
+ GPIO37_GPIO, /* RESET */
+ GPIO57_GPIO, /* WAKEUP */
+
+ /* Neptune handshake */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
+ GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
+ GPIO41_GPIO, /* BP_FLASH */
+
+ /* sound */
+ GPIO52_SSP3_SCLK,
+ GPIO83_SSP3_SFRM,
+ GPIO81_SSP3_TXD,
+ GPIO82_SSP3_RXD,
+
+ /* ssp2 pins to in */
+ GPIO22_GPIO, /* SSP2_SCLK */
+ GPIO14_GPIO, /* SSP2_SFRM */
+ GPIO38_GPIO, /* SSP2_TXD */
+ GPIO88_GPIO, /* SSP2_RXD */
+
+ /* camera */
+ GPIO23_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO85_CIF_LV,
+ GPIO84_CIF_FV,
+ GPIO27_CIF_DD_0,
+ GPIO114_CIF_DD_1,
+ GPIO51_CIF_DD_2,
+ GPIO115_CIF_DD_3,
+ GPIO95_CIF_DD_4,
+ GPIO48_CIF_DD_5,
+ GPIO93_CIF_DD_6,
+ GPIO12_CIF_DD_7,
+ GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
+ GPIO28_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
+ GPIO17_GPIO, /* CAM_FLASH */
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+static unsigned long a780_pin_config[] __initdata = {
+ /* keypad */
+ GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+
+ /* attenuate sound */
+ GPIO96_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+static unsigned long e680_pin_config[] __initdata = {
+ /* keypad */
+ GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+
+ /* MIDI */
+ GPIO79_GPIO, /* VA_SEL_BUL */
+ GPIO80_GPIO, /* FLT_SEL_BUL */
+ GPIO78_GPIO, /* MIDI_RESET */
+ GPIO33_GPIO, /* MIDI_CS */
+ GPIO15_GPIO, /* MIDI_IRQ */
+ GPIO49_GPIO, /* MIDI_NPWE */
+ GPIO18_GPIO, /* MIDI_RDY */
+
+ /* leds */
+ GPIO46_GPIO,
+ GPIO47_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+static unsigned long a1200_pin_config[] __initdata = {
+ /* keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+static unsigned long a910_pin_config[] __initdata = {
+ /* keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+
+ /* WLAN */
+ GPIO89_GPIO, /* RESET */
+ GPIO33_GPIO, /* WAKEUP */
+ GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+
+ /* MMC CS */
+ GPIO20_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+static unsigned long e2_pin_config[] __initdata = {
+ /* keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+static unsigned long e6_pin_config[] __initdata = {
+ /* keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+};
+#endif
+
+/* KEYPAD */
+#ifdef CONFIG_MACH_EZX_A780
+static const unsigned int a780_key_map[] = {
+ KEY(0, 0, KEY_SEND),
+ KEY(0, 1, KEY_BACK),
+ KEY(0, 2, KEY_END),
+ KEY(0, 3, KEY_PAGEUP),
+ KEY(0, 4, KEY_UP),
+
+ KEY(1, 0, KEY_NUMERIC_1),
+ KEY(1, 1, KEY_NUMERIC_2),
+ KEY(1, 2, KEY_NUMERIC_3),
+ KEY(1, 3, KEY_SELECT),
+ KEY(1, 4, KEY_KPENTER),
+
+ KEY(2, 0, KEY_NUMERIC_4),
+ KEY(2, 1, KEY_NUMERIC_5),
+ KEY(2, 2, KEY_NUMERIC_6),
+ KEY(2, 3, KEY_RECORD),
+ KEY(2, 4, KEY_LEFT),
+
+ KEY(3, 0, KEY_NUMERIC_7),
+ KEY(3, 1, KEY_NUMERIC_8),
+ KEY(3, 2, KEY_NUMERIC_9),
+ KEY(3, 3, KEY_HOME),
+ KEY(3, 4, KEY_RIGHT),
+
+ KEY(4, 0, KEY_NUMERIC_STAR),
+ KEY(4, 1, KEY_NUMERIC_0),
+ KEY(4, 2, KEY_NUMERIC_POUND),
+ KEY(4, 3, KEY_PAGEDOWN),
+ KEY(4, 4, KEY_DOWN),
+};
+
+static struct matrix_keymap_data a780_matrix_keymap_data = {
+ .keymap = a780_key_map,
+ .keymap_size = ARRAY_SIZE(a780_key_map),
+};
+
+static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
+ .matrix_key_rows = 5,
+ .matrix_key_cols = 5,
+ .matrix_keymap_data = &a780_matrix_keymap_data,
+
+ .direct_key_map = { KEY_CAMERA },
+ .direct_key_num = 1,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A780 */
+
+#ifdef CONFIG_MACH_EZX_E680
+static const unsigned int e680_key_map[] = {
+ KEY(0, 0, KEY_UP),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_RESERVED),
+ KEY(0, 3, KEY_SEND),
+
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_LEFT),
+ KEY(1, 2, KEY_PAGEUP),
+ KEY(1, 3, KEY_PAGEDOWN),
+
+ KEY(2, 0, KEY_RESERVED),
+ KEY(2, 1, KEY_RESERVED),
+ KEY(2, 2, KEY_RESERVED),
+ KEY(2, 3, KEY_KPENTER),
+};
+
+static struct matrix_keymap_data e680_matrix_keymap_data = {
+ .keymap = e680_key_map,
+ .keymap_size = ARRAY_SIZE(e680_key_map),
+};
+
+static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
+ .matrix_key_rows = 3,
+ .matrix_key_cols = 4,
+ .matrix_keymap_data = &e680_matrix_keymap_data,
+
+ .direct_key_map = {
+ KEY_CAMERA,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_F1,
+ KEY_CANCEL,
+ KEY_F2,
+ },
+ .direct_key_num = 6,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E680 */
+
+#ifdef CONFIG_MACH_EZX_A1200
+static const unsigned int a1200_key_map[] = {
+ KEY(0, 0, KEY_RESERVED),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_PAGEDOWN),
+ KEY(0, 3, KEY_RESERVED),
+ KEY(0, 4, KEY_RESERVED),
+ KEY(0, 5, KEY_RESERVED),
+
+ KEY(1, 0, KEY_RESERVED),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_CAMERA),
+ KEY(1, 3, KEY_RESERVED),
+ KEY(1, 4, KEY_RESERVED),
+ KEY(1, 5, KEY_RESERVED),
+
+ KEY(2, 0, KEY_RESERVED),
+ KEY(2, 1, KEY_KPENTER),
+ KEY(2, 2, KEY_RECORD),
+ KEY(2, 3, KEY_RESERVED),
+ KEY(2, 4, KEY_RESERVED),
+ KEY(2, 5, KEY_SELECT),
+
+ KEY(3, 0, KEY_RESERVED),
+ KEY(3, 1, KEY_UP),
+ KEY(3, 2, KEY_SEND),
+ KEY(3, 3, KEY_RESERVED),
+ KEY(3, 4, KEY_RESERVED),
+ KEY(3, 5, KEY_RESERVED),
+
+ KEY(4, 0, KEY_RESERVED),
+ KEY(4, 1, KEY_LEFT),
+ KEY(4, 2, KEY_PAGEUP),
+ KEY(4, 3, KEY_RESERVED),
+ KEY(4, 4, KEY_RESERVED),
+ KEY(4, 5, KEY_RESERVED),
+};
+
+static struct matrix_keymap_data a1200_matrix_keymap_data = {
+ .keymap = a1200_key_map,
+ .keymap_size = ARRAY_SIZE(a1200_key_map),
+};
+
+static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
+ .matrix_key_rows = 5,
+ .matrix_key_cols = 6,
+ .matrix_keymap_data = &a1200_matrix_keymap_data,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A1200 */
+
+#ifdef CONFIG_MACH_EZX_E6
+static const unsigned int e6_key_map[] = {
+ KEY(0, 0, KEY_RESERVED),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_PAGEDOWN),
+ KEY(0, 3, KEY_RESERVED),
+ KEY(0, 4, KEY_RESERVED),
+ KEY(0, 5, KEY_NEXTSONG),
+
+ KEY(1, 0, KEY_RESERVED),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_PROG1),
+ KEY(1, 3, KEY_RESERVED),
+ KEY(1, 4, KEY_RESERVED),
+ KEY(1, 5, KEY_RESERVED),
+
+ KEY(2, 0, KEY_RESERVED),
+ KEY(2, 1, KEY_ENTER),
+ KEY(2, 2, KEY_CAMERA),
+ KEY(2, 3, KEY_RESERVED),
+ KEY(2, 4, KEY_RESERVED),
+ KEY(2, 5, KEY_WWW),
+
+ KEY(3, 0, KEY_RESERVED),
+ KEY(3, 1, KEY_UP),
+ KEY(3, 2, KEY_SEND),
+ KEY(3, 3, KEY_RESERVED),
+ KEY(3, 4, KEY_RESERVED),
+ KEY(3, 5, KEY_PLAYPAUSE),
+
+ KEY(4, 0, KEY_RESERVED),
+ KEY(4, 1, KEY_LEFT),
+ KEY(4, 2, KEY_PAGEUP),
+ KEY(4, 3, KEY_RESERVED),
+ KEY(4, 4, KEY_RESERVED),
+ KEY(4, 5, KEY_PREVIOUSSONG),
+};
+
+static struct matrix_keymap_data e6_keymap_data = {
+ .keymap = e6_key_map,
+ .keymap_size = ARRAY_SIZE(e6_key_map),
+};
+
+static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
+ .matrix_key_rows = 5,
+ .matrix_key_cols = 6,
+ .matrix_keymap_data = &e6_keymap_data,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E6 */
+
+#ifdef CONFIG_MACH_EZX_A910
+static const unsigned int a910_key_map[] = {
+ KEY(0, 0, KEY_NUMERIC_6),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_PAGEDOWN),
+ KEY(0, 3, KEY_KPENTER),
+ KEY(0, 4, KEY_NUMERIC_5),
+ KEY(0, 5, KEY_CAMERA),
+
+ KEY(1, 0, KEY_NUMERIC_8),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_RESERVED),
+ KEY(1, 3, KEY_F1), /* Left SoftKey */
+ KEY(1, 4, KEY_NUMERIC_STAR),
+ KEY(1, 5, KEY_RESERVED),
+
+ KEY(2, 0, KEY_NUMERIC_7),
+ KEY(2, 1, KEY_NUMERIC_9),
+ KEY(2, 2, KEY_RECORD),
+ KEY(2, 3, KEY_F2), /* Right SoftKey */
+ KEY(2, 4, KEY_BACK),
+ KEY(2, 5, KEY_SELECT),
+
+ KEY(3, 0, KEY_NUMERIC_2),
+ KEY(3, 1, KEY_UP),
+ KEY(3, 2, KEY_SEND),
+ KEY(3, 3, KEY_NUMERIC_0),
+ KEY(3, 4, KEY_NUMERIC_1),
+ KEY(3, 5, KEY_RECORD),
+
+ KEY(4, 0, KEY_NUMERIC_4),
+ KEY(4, 1, KEY_LEFT),
+ KEY(4, 2, KEY_PAGEUP),
+ KEY(4, 3, KEY_NUMERIC_POUND),
+ KEY(4, 4, KEY_NUMERIC_3),
+ KEY(4, 5, KEY_RESERVED),
+};
+
+static struct matrix_keymap_data a910_matrix_keymap_data = {
+ .keymap = a910_key_map,
+ .keymap_size = ARRAY_SIZE(a910_key_map),
+};
+
+static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
+ .matrix_key_rows = 5,
+ .matrix_key_cols = 6,
+ .matrix_keymap_data = &a910_matrix_keymap_data,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A910 */
+
+#ifdef CONFIG_MACH_EZX_E2
+static const unsigned int e2_key_map[] = {
+ KEY(0, 0, KEY_NUMERIC_6),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_NUMERIC_9),
+ KEY(0, 3, KEY_NEXTSONG),
+ KEY(0, 4, KEY_NUMERIC_5),
+ KEY(0, 5, KEY_F1), /* Left SoftKey */
+
+ KEY(1, 0, KEY_NUMERIC_8),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_RESERVED),
+ KEY(1, 3, KEY_PAGEUP),
+ KEY(1, 4, KEY_NUMERIC_STAR),
+ KEY(1, 5, KEY_F2), /* Right SoftKey */
+
+ KEY(2, 0, KEY_NUMERIC_7),
+ KEY(2, 1, KEY_KPENTER),
+ KEY(2, 2, KEY_RECORD),
+ KEY(2, 3, KEY_PAGEDOWN),
+ KEY(2, 4, KEY_BACK),
+ KEY(2, 5, KEY_NUMERIC_0),
+
+ KEY(3, 0, KEY_NUMERIC_2),
+ KEY(3, 1, KEY_UP),
+ KEY(3, 2, KEY_SEND),
+ KEY(3, 3, KEY_PLAYPAUSE),
+ KEY(3, 4, KEY_NUMERIC_1),
+ KEY(3, 5, KEY_SOUND), /* Music SoftKey */
+
+ KEY(4, 0, KEY_NUMERIC_4),
+ KEY(4, 1, KEY_LEFT),
+ KEY(4, 2, KEY_NUMERIC_POUND),
+ KEY(4, 3, KEY_PREVIOUSSONG),
+ KEY(4, 4, KEY_NUMERIC_3),
+ KEY(4, 5, KEY_RESERVED),
+};
+
+static struct matrix_keymap_data e2_matrix_keymap_data = {
+ .keymap = e2_key_map,
+ .keymap_size = ARRAY_SIZE(e2_key_map),
+};
+
+static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
+ .matrix_key_rows = 5,
+ .matrix_key_cols = 6,
+ .matrix_keymap_data = &e2_matrix_keymap_data,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E2 */
+
+#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
+/* camera */
+static struct regulator_consumer_supply camera_dummy_supplies[] = {
+ REGULATOR_SUPPLY("vdd", "0-005d"),
+};
+
+static struct regulator_init_data camera_dummy_initdata = {
+ .consumer_supplies = camera_dummy_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct fixed_voltage_config camera_dummy_config = {
+ .supply_name = "camera_vdd",
+ .microvolts = 2800000,
+ .gpio = GPIO50_nCAM_EN,
+ .enable_high = 0,
+ .init_data = &camera_dummy_initdata,
+};
+
+static struct platform_device camera_supply_dummy_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &camera_dummy_config,
+ },
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+ [0] = {
+ .code = SW_LID,
+ .gpio = GPIO12_A780_FLIP_LID,
+ .active_low = 0,
+ .desc = "A780 flip lid",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+ .buttons = a780_buttons,
+ .nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &a780_gpio_keys_platform_data,
+ },
+};
+
+/* camera */
+static int a780_camera_reset(struct device *dev)
+{
+ gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
+ msleep(10);
+ gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+
+ return 0;
+}
+
+static int a780_camera_init(void)
+{
+ int err;
+
+ /*
+ * GPIO50_nCAM_EN is active low
+ * GPIO19_GEN1_CAM_RST is active on rising edge
+ */
+ err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
+ if (err) {
+ pr_err("%s: Failed to request CAM_RST\n", __func__);
+ return err;
+ }
+
+ gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
+ a780_camera_reset(NULL);
+
+ return 0;
+}
+
+struct pxacamera_platform_data a780_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
+ PXA_CAMERA_PCP,
+ .mclk_10khz = 5000,
+ .sensor_i2c_adapter_id = 0,
+ .sensor_i2c_address = 0x5d,
+};
+
+static struct i2c_board_info a780_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("mt9m111", 0x5d),
+ },
+};
+
+static struct platform_device *a780_devices[] __initdata = {
+ &a780_gpio_keys,
+ &camera_supply_dummy_device,
+};
+
+static void __init a780_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(a780_i2c_board_info));
+
+ pxa_set_fb_info(NULL, &ezx_fb_info_1);
+
+ pxa_set_keypad_info(&a780_keypad_platform_data);
+
+ if (a780_camera_init() == 0)
+ pxa_set_camera_info(&a780_pxacamera_platform_data);
+
+ pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(a780_devices));
+ regulator_has_full_constraints();
+}
+
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = EZX_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = a780_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+/* gpio_keys */
+static struct gpio_keys_button e680_buttons[] = {
+ [0] = {
+ .code = KEY_SCREENLOCK,
+ .gpio = GPIO12_E680_LOCK_SWITCH,
+ .active_low = 0,
+ .desc = "E680 lock switch",
+ .type = EV_KEY,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
+ .buttons = e680_buttons,
+ .nbuttons = ARRAY_SIZE(e680_buttons),
+};
+
+static struct platform_device e680_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &e680_gpio_keys_platform_data,
+ },
+};
+
+static struct i2c_board_info __initdata e680_i2c_board_info[] = {
+ { I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static struct platform_device *e680_devices[] __initdata = {
+ &e680_gpio_keys,
+};
+
+static void __init e680_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
+
+ pxa_set_fb_info(NULL, &ezx_fb_info_1);
+
+ pxa_set_keypad_info(&e680_keypad_platform_data);
+
+ pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(e680_devices));
+}
+
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = EZX_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = e680_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+/* gpio_keys */
+static struct gpio_keys_button a1200_buttons[] = {
+ [0] = {
+ .code = SW_LID,
+ .gpio = GPIO15_A1200_FLIP_LID,
+ .active_low = 0,
+ .desc = "A1200 flip lid",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
+ .buttons = a1200_buttons,
+ .nbuttons = ARRAY_SIZE(a1200_buttons),
+};
+
+static struct platform_device a1200_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &a1200_gpio_keys_platform_data,
+ },
+};
+
+static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
+ { I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static struct platform_device *a1200_devices[] __initdata = {
+ &a1200_gpio_keys,
+};
+
+static void __init a1200_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
+
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
+
+ pxa_set_keypad_info(&a1200_keypad_platform_data);
+
+ pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
+}
+
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = EZX_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = a1200_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+/* gpio_keys */
+static struct gpio_keys_button a910_buttons[] = {
+ [0] = {
+ .code = SW_LID,
+ .gpio = GPIO15_A910_FLIP_LID,
+ .active_low = 0,
+ .desc = "A910 flip lid",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
+ .buttons = a910_buttons,
+ .nbuttons = ARRAY_SIZE(a910_buttons),
+};
+
+static struct platform_device a910_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &a910_gpio_keys_platform_data,
+ },
+};
+
+/* camera */
+static int a910_camera_reset(struct device *dev)
+{
+ gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
+ msleep(10);
+ gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+
+ return 0;
+}
+
+static int a910_camera_init(void)
+{
+ int err;
+
+ /*
+ * GPIO50_nCAM_EN is active low
+ * GPIO28_GEN2_CAM_RST is active on rising edge
+ */
+ err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
+ if (err) {
+ pr_err("%s: Failed to request CAM_RST\n", __func__);
+ return err;
+ }
+
+ gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
+ a910_camera_reset(NULL);
+
+ return 0;
+}
+
+struct pxacamera_platform_data a910_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
+ PXA_CAMERA_PCP,
+ .mclk_10khz = 5000,
+ .sensor_i2c_adapter_id = 0,
+ .sensor_i2c_address = 0x5d,
+};
+
+/* leds-lp3944 */
+static struct lp3944_platform_data a910_lp3944_leds = {
+ .leds_size = LP3944_LEDS_MAX,
+ .leds = {
+ [0] = {
+ .name = "a910:red:",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ [1] = {
+ .name = "a910:green:",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ [2] {
+ .name = "a910:blue:",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ /* Leds 3 and 4 are used as display power switches */
+ [3] = {
+ .name = "a910::cli_display",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED_INVERTED
+ },
+ [4] = {
+ .name = "a910::main_display",
+ .status = LP3944_LED_STATUS_ON,
+ .type = LP3944_LED_TYPE_LED_INVERTED
+ },
+ [5] = { .type = LP3944_LED_TYPE_NONE },
+ [6] = {
+ .name = "a910::torch",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ [7] = {
+ .name = "a910::flash",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED_INVERTED,
+ },
+ },
+};
+
+static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("lp3944", 0x60),
+ .platform_data = &a910_lp3944_leds,
+ },
+ {
+ I2C_BOARD_INFO("mt9m111", 0x5d),
+ },
+};
+
+static struct platform_device *a910_devices[] __initdata = {
+ &a910_gpio_keys,
+ &camera_supply_dummy_device,
+};
+
+static void __init a910_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
+
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
+
+ pxa_set_keypad_info(&a910_keypad_platform_data);
+
+ if (a910_camera_init() == 0)
+ pxa_set_camera_info(&a910_pxacamera_platform_data);
+
+ pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(a910_devices));
+ regulator_has_full_constraints();
+}
+
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = EZX_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = a910_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+/* gpio_keys */
+static struct gpio_keys_button e6_buttons[] = {
+ [0] = {
+ .code = KEY_SCREENLOCK,
+ .gpio = GPIO15_E6_LOCK_SWITCH,
+ .active_low = 0,
+ .desc = "E6 lock switch",
+ .type = EV_KEY,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
+ .buttons = e6_buttons,
+ .nbuttons = ARRAY_SIZE(e6_buttons),
+};
+
+static struct platform_device e6_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &e6_gpio_keys_platform_data,
+ },
+};
+
+static struct i2c_board_info __initdata e6_i2c_board_info[] = {
+ { I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static struct platform_device *e6_devices[] __initdata = {
+ &e6_gpio_keys,
+};
+
+static void __init e6_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
+
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
+
+ pxa_set_keypad_info(&e6_keypad_platform_data);
+
+ pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(e6_devices));
+}
+
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = EZX_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = e6_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+static struct i2c_board_info __initdata e2_i2c_board_info[] = {
+ { I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static struct platform_device *e2_devices[] __initdata = {
+};
+
+static void __init e2_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
+
+ pxa_set_fb_info(NULL, &ezx_fb_info_2);
+
+ pxa_set_keypad_info(&e2_keypad_platform_data);
+
+ pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(e2_devices));
+}
+
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = EZX_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = e2_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
new file mode 100644
index 0000000..cb73a97
--- /dev/null
+++ b/arch/arm/mach-pxa/generic.c
@@ -0,0 +1,94 @@
+/*
+ * linux/arch/arm/mach-pxa/generic.c
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * Code common to all PXA machines.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Since this file should be linked before any other machine specific file,
+ * the __initcall() here will be executed first. This serves as default
+ * initialization stuff for PXA machines which can be overridden later if
+ * need be.
+ */
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/reset.h>
+#include <mach/smemc.h>
+#include <mach/pxa3xx-regs.h>
+
+#include "generic.h"
+#include <clocksource/pxa.h>
+
+void clear_reset_status(unsigned int mask)
+{
+ if (cpu_is_pxa2xx())
+ pxa2xx_clear_reset_status(mask);
+ else {
+ /* RESET_STATUS_* has a 1:1 mapping with ARSR */
+ ARSR = mask;
+ }
+}
+
+/*
+ * For non device-tree builds, keep legacy timer init
+ */
+void __init pxa_timer_init(void)
+{
+ if (cpu_is_pxa25x())
+ pxa25x_clocks_init();
+ if (cpu_is_pxa27x())
+ pxa27x_clocks_init();
+ if (cpu_is_pxa3xx())
+ pxa3xx_clocks_init();
+ pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000));
+}
+
+/*
+ * Get the clock frequency as reflected by CCCR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int get_clk_frequency_khz(int info)
+{
+ if (cpu_is_pxa25x())
+ return pxa25x_get_clk_frequency_khz(info);
+ else if (cpu_is_pxa27x())
+ return pxa27x_get_clk_frequency_khz(info);
+ return 0;
+}
+EXPORT_SYMBOL(get_clk_frequency_khz);
+
+/*
+ * Intel PXA2xx internal register mapping.
+ *
+ * Note: virtual 0xfffe0000-0xffffffff is reserved for the vector table
+ * and cache flush area.
+ */
+static struct map_desc common_io_desc[] __initdata = {
+ { /* Devs */
+ .virtual = (unsigned long)PERIPH_VIRT,
+ .pfn = __phys_to_pfn(PERIPH_PHYS),
+ .length = PERIPH_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+void __init pxa_map_io(void)
+{
+ debug_ll_io_init();
+ iotable_init(ARRAY_AND_SIZE(common_io_desc));
+}
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
new file mode 100644
index 0000000..75e3f61
--- /dev/null
+++ b/arch/arm/mach-pxa/generic.h
@@ -0,0 +1,81 @@
+/*
+ * linux/arch/arm/mach-pxa/generic.h
+ *
+ * Author: Nicolas Pitre
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/reboot.h>
+
+struct irq_data;
+
+extern unsigned int get_clk_frequency_khz(int info);
+extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *,
+ unsigned int));
+extern void __init pxa_map_io(void);
+extern void pxa_timer_init(void);
+
+#define SET_BANK(__nr,__start,__size) \
+ mi->bank[__nr].start = (__start), \
+ mi->bank[__nr].size = (__size)
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+#define pxa25x_handle_irq icip_handle_irq
+extern int __init pxa25x_clocks_init(void);
+extern void __init pxa25x_init_irq(void);
+extern void __init pxa25x_map_io(void);
+extern void __init pxa26x_init_irq(void);
+
+#define pxa27x_handle_irq ichp_handle_irq
+extern int __init pxa27x_clocks_init(void);
+extern unsigned pxa27x_get_clk_frequency_khz(int);
+extern void __init pxa27x_init_irq(void);
+extern void __init pxa27x_map_io(void);
+
+#define pxa3xx_handle_irq ichp_handle_irq
+extern int __init pxa3xx_clocks_init(void);
+extern void __init pxa3xx_init_irq(void);
+extern void __init pxa3xx_map_io(void);
+
+extern struct syscore_ops pxa_irq_syscore_ops;
+extern struct syscore_ops pxa2xx_mfp_syscore_ops;
+extern struct syscore_ops pxa3xx_mfp_syscore_ops;
+
+void __init pxa_set_ffuart_info(void *info);
+void __init pxa_set_btuart_info(void *info);
+void __init pxa_set_stuart_info(void *info);
+void __init pxa_set_hwuart_info(void *info);
+
+void pxa_restart(enum reboot_mode, const char *);
+
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+extern void pxa2xx_clear_reset_status(unsigned int);
+#else
+static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
+#endif
+
+/*
+ * Once fully converted to the clock framework, all these functions should be
+ * removed, and replaced with a clk_get(NULL, "core").
+ */
+#ifdef CONFIG_PXA25x
+extern unsigned pxa25x_get_clk_frequency_khz(int);
+#else
+#define pxa25x_get_clk_frequency_khz(x) (0)
+#endif
+
+#ifdef CONFIG_PXA27x
+#else
+#define pxa27x_get_clk_frequency_khz(x) (0)
+#endif
+
+#ifdef CONFIG_PXA3xx
+extern unsigned pxa3xx_get_clk_frequency_khz(int);
+#else
+#define pxa3xx_get_clk_frequency_khz(x) (0)
+#endif
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
new file mode 100644
index 0000000..9c5b2fb
--- /dev/null
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -0,0 +1,243 @@
+/*
+ * linux/arch/arm/mach-pxa/gumstix.c
+ *
+ * Support for the Gumstix motherboards.
+ *
+ * Original Author: Craig Hughes
+ * Created: Feb 14, 2008
+ * Copyright: Craig Hughes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Implemented based on lubbock.c by Nicolas Pitre and code from Craig
+ * Hughes
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include "pxa25x.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include "udc.h"
+#include "gumstix.h"
+
+#include "generic.h"
+
+static struct resource flash_resource = {
+ .start = 0x00000000,
+ .end = SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition gumstix_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ } , {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND
+ }
+};
+
+static struct flash_platform_data gumstix_flash_data = {
+ .map_name = "cfi_probe",
+ .parts = gumstix_partitions,
+ .nr_parts = ARRAY_SIZE(gumstix_partitions),
+ .width = 2,
+};
+
+static struct platform_device gumstix_flash_device = {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &gumstix_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &gumstix_flash_device,
+};
+
+#ifdef CONFIG_MMC_PXA
+static struct pxamci_platform_data gumstix_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+static void __init gumstix_mmc_init(void)
+{
+ pxa_set_mci_info(&gumstix_mci_platform_data);
+}
+#else
+static void __init gumstix_mmc_init(void)
+{
+ pr_debug("Gumstix mmc disabled\n");
+}
+#endif
+
+#ifdef CONFIG_USB_PXA25X
+static struct gpio_vbus_mach_info gumstix_udc_info = {
+ .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn,
+ .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx,
+};
+
+static struct platform_device gumstix_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &gumstix_udc_info,
+ },
+};
+
+static void __init gumstix_udc_init(void)
+{
+ platform_device_register(&gumstix_gpio_vbus);
+}
+#else
+static void gumstix_udc_init(void)
+{
+ pr_debug("Gumstix udc is disabled\n");
+}
+#endif
+
+#ifdef CONFIG_BT
+/* Normally, the bootloader would have enabled this 32kHz clock but many
+** boards still have u-boot 1.1.4 so we check if it has been turned on and
+** if not, we turn it on with a warning message. */
+static void gumstix_setup_bt_clock(void)
+{
+ int timeout = 500;
+
+ if (!(readl(OSCC) & OSCC_OOK))
+ pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
+ else
+ return;
+
+ writel(readl(OSCC) | OSCC_OON, OSCC);
+ do {
+ if (readl(OSCC) & OSCC_OOK)
+ break;
+ udelay(1);
+ } while (--timeout);
+ if (!timeout)
+ pr_err("Failed to start 32kHz clock\n");
+}
+
+static void __init gumstix_bluetooth_init(void)
+{
+ int err;
+
+ gumstix_setup_bt_clock();
+
+ err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST");
+ if (err) {
+ pr_err("gumstix: failed request gpio for bluetooth reset\n");
+ return;
+ }
+
+ err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1);
+ if (err) {
+ pr_err("gumstix: can't reset bluetooth\n");
+ return;
+ }
+ gpio_set_value(GPIO_GUMSTIX_BTRESET, 0);
+ udelay(100);
+ gpio_set_value(GPIO_GUMSTIX_BTRESET, 1);
+}
+#else
+static void gumstix_bluetooth_init(void)
+{
+ pr_debug("Gumstix Bluetooth is disabled\n");
+}
+#endif
+
+static unsigned long gumstix_pin_config[] __initdata = {
+ GPIO12_32KHz,
+ /* BTUART */
+ GPIO42_HWUART_RXD,
+ GPIO43_HWUART_TXD,
+ GPIO44_HWUART_CTS,
+ GPIO45_HWUART_RTS,
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO53_MMC_CLK,
+ GPIO8_MMC_CS0,
+};
+
+int __attribute__((weak)) am200_init(void)
+{
+ return 0;
+}
+
+int __attribute__((weak)) am300_init(void)
+{
+ return 0;
+}
+
+static void __init carrier_board_init(void)
+{
+ /*
+ * put carrier/expansion board init here if
+ * they cannot be detected programatically
+ */
+ am200_init();
+ am300_init();
+}
+
+static void __init gumstix_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_hwuart_info(NULL);
+
+ gumstix_bluetooth_init();
+ gumstix_udc_init();
+ gumstix_mmc_init();
+ (void) platform_add_devices(devices, ARRAY_SIZE(devices));
+ carrier_board_init();
+}
+
+MACHINE_START(GUMSTIX, "Gumstix")
+ .atag_offset = 0x100, /* match u-boot bi_boot_params */
+ .map_io = pxa25x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = gumstix_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/gumstix.h b/arch/arm/mach-pxa/gumstix.h
new file mode 100644
index 0000000..825f2d1
--- /dev/null
+++ b/arch/arm/mach-pxa/gumstix.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-pxa/include/mach/gumstix.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+
+/* BTRESET - Reset line to Bluetooth module, active low signal. */
+#define GPIO_GUMSTIX_BTRESET 7
+#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT)
+
+
+/*
+GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
+interrupt signal for determining cable presence. On the gumstix F,
+this moves to GPIO17 and GPIO37. */
+
+/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
+has detected a cable insertion; driven low otherwise. */
+
+#define GPIO_GUMSTIX_USB_GPIOn 35
+#define GPIO_GUMSTIX_USB_GPIOx 41
+
+/* usb state change */
+#define GUMSTIX_USB_INTR_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn)
+
+#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
+#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
+#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
+
+/*
+ * SD/MMC definitions
+ */
+#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */
+#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT)
+
+/*
+ * SMC Ethernet definitions
+ * ETH_RST provides a hardware reset line to the ethernet chip
+ * ETH is the IRQ line in from the ethernet chip to the PXA
+ */
+#define GPIO_GUMSTIX_ETH0_RST 80
+#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
+#define GPIO_GUMSTIX_ETH1_RST 52
+#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
+
+#define GPIO_GUMSTIX_ETH0 36
+#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN)
+#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
+#define GPIO_GUMSTIX_ETH1 27
+#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN)
+#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
+
+
+/* CF reset line */
+#define GPIO8_RESET 8
+
+/* CF slot 0 */
+#define GPIO4_nBVD1 4
+#define GPIO4_nSTSCHG GPIO4_nBVD1
+#define GPIO11_nCD 11
+#define GPIO26_PRDY_nBSY 26
+#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY)
+
+/* CF slot 1 */
+#define GPIO18_nBVD1 18
+#define GPIO18_nSTSCHG GPIO18_nBVD1
+#define GPIO36_nCD 36
+#define GPIO27_PRDY_nBSY 27
+#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY)
+
+/* CF GPIO line modes */
+#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN)
+#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT)
+#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN)
+#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN)
+#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN)
+#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN)
+#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN)
+
+/* for expansion boards that can't be programatically detected */
+extern int am200_init(void);
+extern int am300_init(void);
+
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
new file mode 100644
index 0000000..be2a9c3
--- /dev/null
+++ b/arch/arm/mach-pxa/h5000.c
@@ -0,0 +1,214 @@
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright 2000-2003 Hewlett-Packard Company.
+ * Copyright 2002 Jamey Hicks <jamey.hicks@hp.com>
+ * Copyright 2004-2005 Phil Blundell <pb@handhelds.org>
+ * Copyright 2007-2008 Anton Vorontsov <cbouatmailru@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/irq.h>
+
+#include "pxa25x.h"
+#include "h5000.h"
+#include "udc.h"
+#include <mach/smemc.h>
+
+#include "generic.h"
+
+/*
+ * Flash
+ */
+
+static struct mtd_partition h5000_flash0_partitions[] = {
+ {
+ .name = "bootldr",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "root",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
+static struct mtd_partition h5000_flash1_partitions[] = {
+ {
+ .name = "second root",
+ .size = SZ_16M - 0x00040000,
+ .offset = 0,
+ },
+ {
+ .name = "asset",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct physmap_flash_data h5000_flash0_data = {
+ .width = 4,
+ .parts = h5000_flash0_partitions,
+ .nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
+};
+
+static struct physmap_flash_data h5000_flash1_data = {
+ .width = 4,
+ .parts = h5000_flash1_partitions,
+ .nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
+};
+
+static struct resource h5000_flash0_resources = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct resource h5000_flash1_resources = {
+ .start = PXA_CS0_PHYS + SZ_32M,
+ .end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct platform_device h5000_flash[] = {
+ {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &h5000_flash0_resources,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &h5000_flash0_data,
+ },
+ },
+ {
+ .name = "physmap-flash",
+ .id = 1,
+ .resource = &h5000_flash1_resources,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &h5000_flash1_data,
+ },
+ },
+};
+
+/*
+ * USB Device Controller
+ */
+
+static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
+ .gpio_pullup = H5000_GPIO_USB_PULLUP,
+};
+
+/*
+ * GPIO setup
+ */
+
+static unsigned long h5000_pin_config[] __initdata = {
+ /* Crystal and Clock Signals */
+ GPIO12_32KHz,
+
+ /* SDRAM and Static Memory I/O Signals */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+ GPIO32_I2S_SYSCLK,
+};
+
+/*
+ * Localbus setup:
+ * CS0: Flash;
+ * CS1: MediaQ chip, select 16-bit bus and vlio;
+ * CS5: SAMCOP.
+ */
+
+static void fix_msc(void)
+{
+ __raw_writel(0x129c24f2, MSC0);
+ __raw_writel(0x7ff424fa, MSC1);
+ __raw_writel(0x7ff47ff4, MSC2);
+
+ __raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
+}
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+ &h5000_flash[0],
+ &h5000_flash[1],
+};
+
+static void __init h5000_init(void)
+{
+ fix_msc();
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_udc_info(&h5000_udc_mach_info);
+ platform_add_devices(ARRAY_AND_SIZE(devices));
+}
+
+MACHINE_START(H5400, "HP iPAQ H5000")
+ .atag_offset = 0x100,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = h5000_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.h b/arch/arm/mach-pxa/h5000.h
new file mode 100644
index 0000000..252461f
--- /dev/null
+++ b/arch/arm/mach-pxa/h5000.h
@@ -0,0 +1,113 @@
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright(20)02 Hewlett-Packard Company.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks
+ */
+
+#ifndef __ASM_ARCH_H5000_H
+#define __ASM_ARCH_H5000_H
+
+#include "mfp-pxa25x.h"
+
+/*
+ * CPU GPIOs
+ */
+
+#define H5000_GPIO_POWER_BUTTON (0)
+#define H5000_GPIO_RESET_BUTTON_N (1)
+#define H5000_GPIO_OPT_INT (2)
+#define H5000_GPIO_BACKUP_POWER (3)
+#define H5000_GPIO_ACTION_BUTTON (4)
+#define H5000_GPIO_COM_DCD_SOMETHING (5) /* what is this really ? */
+/* 6 not connected */
+#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
+/* 8 not connected */
+#define H5000_GPIO_RSO_N (9) /* reset output from max1702 which regulates 3.3 and 2.5 */
+#define H5000_GPIO_ASIC_INT_N (10) /* from companion asic */
+#define H5000_GPIO_BT_ENV_0 (11) /* to LMX9814, set to 1 according to regdump */
+/*(12) not connected */
+#define H5000_GPIO_BT_ENV_1 (13) /* to LMX9814, set to 1 according to regdump */
+#define H5000_GPIO_BT_WU (14) /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
+/*(15) is CS1# */
+/*(16) not connected */
+/*(17) not connected */
+/*(18) is pcmcia ready */
+/*(19) is dreq1 */
+/*(20) is dreq0 */
+#define H5000_GPIO_OE_RD_NWR (21) /* output enable on rd/nwr signal to companion asic */
+/*(22) is not connected */
+#define H5000_GPIO_OPT_SPI_CLK (23) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_CS_N (24) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DOUT (25) /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DIN (26) /* to extension pack */
+/*(27) not connected */
+#define H5000_GPIO_I2S_BITCLK (28) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAOUT (29) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAIN (30) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_LRCLK (31) /* connected to AC97 codec */
+#define H5000_GPIO_I2S_SYSCLK (32) /* connected to AC97 codec */
+/*(33) is CS5# */
+#define H5000_GPIO_COM_RXD (34) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_CTS (35) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DCD (36) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DSR (37) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RI (38) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_TXD (39) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DTR (40) /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RTS (41) /* connected to cradle/cable connector */
+
+#define H5000_GPIO_BT_RXD (42) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_TXD (43) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_CTS (44) /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_RTS (45) /* connected to BT (LMX9814) */
+
+#define H5000_GPIO_IRDA_RXD (46)
+#define H5000_GPIO_IRDA_TXD (47)
+
+#define H5000_GPIO_POE_N (48) /* used for pcmcia */
+#define H5000_GPIO_PWE_N (49) /* used for pcmcia */
+#define H5000_GPIO_PIOR_N (50) /* used for pcmcia */
+#define H5000_GPIO_PIOW_N (51) /* used for pcmcia */
+#define H5000_GPIO_PCE1_N (52) /* used for pcmcia */
+#define H5000_GPIO_PCE2_N (53) /* used for pcmcia */
+#define H5000_GPIO_PSKTSEL (54) /* used for pcmcia */
+#define H5000_GPIO_PREG_N (55) /* used for pcmcia */
+#define H5000_GPIO_PWAIT_N (56) /* used for pcmcia */
+#define H5000_GPIO_IOIS16_N (57) /* used for pcmcia */
+
+#define H5000_GPIO_IRDA_SD (58) /* to hsdl3002 sd */
+/*(59) not connected */
+#define H5000_GPIO_POWER_SD_N (60) /* controls power to SD */
+#define H5000_GPIO_POWER_RS232_N (61) /* inverted FORCEON to rs232 transceiver */
+#define H5000_GPIO_POWER_ACCEL_N (62) /* controls power to accel */
+/*(63) is not connected */
+#define H5000_GPIO_OPT_NVRAM (64) /* controls power to expansion pack */
+#define H5000_GPIO_CHG_EN (65) /* to sc801 en */
+#define H5000_GPIO_USB_PULLUP (66) /* USB d+ pullup via 1.5K resistor */
+#define H5000_GPIO_BT_2V8_N (67) /* 2.8V used by bluetooth */
+#define H5000_GPIO_EXT_CHG_RATE (68) /* enables external charging rate */
+/*(69) is not connected */
+#define H5000_GPIO_CIR_RESET (70) /* consumer IR reset */
+#define H5000_GPIO_POWER_LIGHT_SENSOR_N (71)
+#define H5000_GPIO_BT_M_RESET (72)
+#define H5000_GPIO_STD_CHG_RATE (73)
+#define H5000_GPIO_SD_WP_N (74)
+#define H5000_GPIO_MOTOR_ON_N (75) /* external pullup on this */
+#define H5000_GPIO_HEADPHONE_DETECT (76)
+#define H5000_GPIO_USB_CHG_RATE (77) /* select rate for charging via usb */
+/*(78) is CS2# */
+/*(79) is CS3# */
+/*(80) is CS4# */
+
+#endif /* __ASM_ARCH_H5000_H */
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
new file mode 100644
index 0000000..70e9c06
--- /dev/null
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -0,0 +1,169 @@
+/*
+ * linux/arch/arm/mach-pxa/himalaya.c
+ *
+ * Hardware definitions for the HTC Himalaya
+ *
+ * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
+ *
+ * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa25x.h"
+
+#include "generic.h"
+
+/* ---------------------- Himalaya LCD definitions -------------------- */
+
+static struct w100_gen_regs himalaya_lcd_regs = {
+ .lcd_format = 0x00000003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00fff003,
+ .genlcd_cntl2 = 0x00000003,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode himalaya4_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 0,
+ .right_margin = 31,
+ .upper_margin = 15,
+ .lower_margin = 0,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0xa0fb00f7,
+ .crtc_gs = 0xc0080007,
+ .crtc_vpos_gs = 0x00080007,
+ .crtc_rev = 0x0000000a,
+ .crtc_dclk = 0x81700030,
+ .crtc_gclk = 0x8015010f,
+ .crtc_goe = 0x00000000,
+ .pll_freq = 80,
+ .pixclk_divider = 15,
+ .pixclk_divider_rotated = 15,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+static struct w100_mode himalaya6_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 9,
+ .right_margin = 8,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0xa0fb00f7,
+ .crtc_gs = 0xc0080007,
+ .crtc_vpos_gs = 0x00080007,
+ .crtc_rev = 0x0000000a,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x8015010f,
+ .crtc_goe = 0x00000000,
+ .pll_freq = 95,
+ .pixclk_divider = 0xb,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs himalaya_w100_gpio_info = {
+ .init_data1 = 0xffff0000, /* GPIO_DATA */
+ .gpio_dir1 = 0x00000000, /* GPIO_CNTL1 */
+ .gpio_oe1 = 0x003c0000, /* GPIO_CNTL2 */
+ .init_data2 = 0x00000000, /* GPIO_DATA2 */
+ .gpio_dir2 = 0x00000000, /* GPIO_CNTL3 */
+ .gpio_oe2 = 0x00000000, /* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info himalaya_fb_info = {
+ .num_modes = 1,
+ .regs = &himalaya_lcd_regs,
+ .gpio = &himalaya_w100_gpio_info,
+ .xtal_freq = 16000000,
+};
+
+static struct resource himalaya_fb_resources[] = {
+ [0] = {
+ .start = 0x08000000,
+ .end = 0x08ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device himalaya_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &himalaya_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(himalaya_fb_resources),
+ .resource = himalaya_fb_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+ &himalaya_fb_device,
+};
+
+static void __init himalaya_lcd_init(void)
+{
+ int himalaya_boardid;
+
+ himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
+ printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
+ himalaya_boardid);
+
+ switch (himalaya_boardid) {
+ case 0x4:
+ himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+ break;
+ case 0x6:
+ himalaya_fb_info.modelist = &himalaya6_lcd_mode;
+ break;
+ default:
+ printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
+ himalaya_boardid);
+ himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+ }
+}
+
+static void __init himalaya_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ himalaya_lcd_init();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+
+MACHINE_START(HIMALAYA, "HTC Himalaya")
+ .atag_offset = 0x100,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_machine = himalaya_init,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
new file mode 100644
index 0000000..b79b757
--- /dev/null
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -0,0 +1,910 @@
+/*
+ * Support for HP iPAQ hx4700 PDAs.
+ *
+ * Copyright (c) 2008-2009 Philipp Zabel
+ *
+ * Based on code:
+ * Copyright (c) 2004 Hewlett-Packard Company.
+ * Copyright (c) 2005 SDG Systems, LLC
+ * Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/input/navpoint.h>
+#include <linux/lcd.h>
+#include <linux/mfd/asic3.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pda_power.h>
+#include <linux/platform_data/gpio-htc-egpio.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/gpio-regulator.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/max1586.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa27x.h"
+#include <mach/hx4700.h>
+#include <linux/platform_data/irda-pxaficp.h>
+
+#include <sound/ak4641.h>
+#include <video/platform_lcd.h>
+#include <video/w100fb.h>
+
+#include "devices.h"
+#include "generic.h"
+#include "udc.h"
+
+/* Physical address space information */
+
+#define ATI_W3220_PHYS PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
+#define ASIC3_PHYS PXA_CS3_PHYS
+#define ASIC3_SD_PHYS (PXA_CS3_PHYS + 0x02000000)
+
+static unsigned long hx4700_pin_config[] __initdata = {
+
+ /* SDRAM and Static Memory I/O Signals */
+ GPIO20_nSDCS_2,
+ GPIO21_nSDCS_3,
+ GPIO15_nCS_1,
+ GPIO78_nCS_2, /* W3220 */
+ GPIO79_nCS_3, /* ASIC3 */
+ GPIO80_nCS_4,
+ GPIO33_nCS_5, /* EGPIO, WLAN */
+
+ /* PC CARD */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO85_nPCE_1,
+ GPIO104_PSKTSEL,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* FFUART (RS-232) */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD_LPM_LOW,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS_LPM_LOW,
+
+ /* STUART (IRDA) */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* PWM 1 (Backlight) */
+ GPIO17_PWM1_OUT,
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+ GPIO113_I2S_SYSCLK,
+
+ /* SSP 1 (NavPoint) */
+ GPIO23_SSP1_SCLK_IN,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* SSP 2 (TSC2046) */
+ GPIO19_SSP2_SCLK,
+ GPIO86_SSP2_RXD,
+ GPIO87_SSP2_TXD,
+ GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */
+
+ /* BQ24022 Regulator */
+ GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */
+ GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */
+
+ /* HX4700 specific input GPIOs */
+ GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */
+ GPIO13_GPIO, /* W3220_IRQ */
+ GPIO14_GPIO, /* nWLAN_IRQ */
+
+ /* HX4700 specific output GPIOs */
+ GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */
+ GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */
+ GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */
+ GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */
+
+ GPIO10_GPIO, /* GSM_IRQ */
+ GPIO13_GPIO, /* CPLD_IRQ */
+ GPIO107_GPIO, /* DS1WM_IRQ */
+ GPIO108_GPIO, /* GSM_READY */
+ GPIO58_GPIO, /* TSC2046_nPENIRQ */
+ GPIO66_GPIO, /* nSDIO_IRQ */
+};
+
+/*
+ * IRDA
+ */
+
+static struct pxaficp_platform_data ficp_info = {
+ .gpio_pwdown = GPIO105_HX4700_nIR_ON,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+/*
+ * GPIO Keys
+ */
+
+#define INIT_KEY(_code, _gpio, _active_low, _desc) \
+ { \
+ .code = KEY_##_code, \
+ .gpio = _gpio, \
+ .active_low = _active_low, \
+ .desc = _desc, \
+ .type = EV_KEY, \
+ .wakeup = 1, \
+ }
+
+static struct gpio_keys_button gpio_keys_buttons[] = {
+ INIT_KEY(POWER, GPIO0_HX4700_nKEY_POWER, 1, "Power button"),
+ INIT_KEY(MAIL, GPIO94_HX4700_KEY_MAIL, 0, "Mail button"),
+ INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
+ INIT_KEY(RECORD, GPIOD6_nKEY_RECORD, 1, "Record button"),
+ INIT_KEY(CALENDAR, GPIOD1_nKEY_CALENDAR, 1, "Calendar button"),
+ INIT_KEY(HOMEPAGE, GPIOD3_nKEY_HOME, 1, "Home button"),
+};
+
+static struct gpio_keys_platform_data gpio_keys_data = {
+ .buttons = gpio_keys_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_keys_buttons),
+};
+
+static struct platform_device gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &gpio_keys_data,
+ },
+ .id = -1,
+};
+
+/*
+ * Synaptics NavPoint connected to SSP1
+ */
+
+static struct navpoint_platform_data navpoint_platform_data = {
+ .port = 1,
+ .gpio = GPIO102_HX4700_SYNAPTICS_POWER_ON,
+};
+
+static struct platform_device navpoint = {
+ .name = "navpoint",
+ .id = -1,
+ .dev = {
+ .platform_data = &navpoint_platform_data,
+ },
+};
+
+/*
+ * ASIC3
+ */
+
+static u16 asic3_gpio_config[] = {
+ /* ASIC3 GPIO banks A and B along with some of C and D
+ implement the buffering for the CF slot. */
+ ASIC3_CONFIG_GPIO(0, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(1, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(2, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(3, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(4, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(5, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(6, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(7, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(8, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(9, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(10, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(11, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(12, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(13, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(14, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(15, 1, 1, 0),
+
+ ASIC3_CONFIG_GPIO(16, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(17, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(18, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(19, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(20, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(21, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(22, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(23, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(24, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(25, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(26, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(27, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(28, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(29, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(30, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(31, 1, 1, 0),
+
+ /* GPIOC - CF, LEDs, SD */
+ ASIC3_GPIOC0_LED0, /* red */
+ ASIC3_GPIOC1_LED1, /* green */
+ ASIC3_GPIOC2_LED2, /* blue */
+ ASIC3_GPIOC5_nCIOW,
+ ASIC3_GPIOC6_nCIOR,
+ ASIC3_GPIOC7_nPCE_1,
+ ASIC3_GPIOC8_nPCE_2,
+ ASIC3_GPIOC9_nPOE,
+ ASIC3_GPIOC10_nPWE,
+ ASIC3_GPIOC11_PSKTSEL,
+ ASIC3_GPIOC12_nPREG,
+ ASIC3_GPIOC13_nPWAIT,
+ ASIC3_GPIOC14_nPIOIS16,
+ ASIC3_GPIOC15_nPIOR,
+
+ /* GPIOD: input GPIOs, CF */
+ ASIC3_GPIOD4_CF_nCD,
+ ASIC3_GPIOD11_nCIOIS16,
+ ASIC3_GPIOD12_nCWAIT,
+ ASIC3_GPIOD15_nPIOW,
+};
+
+static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
+ [0] = {
+ .name = "hx4700:amber",
+ .default_trigger = "ds2760-battery.0-charging-blink-full-solid",
+ },
+ [1] = {
+ .name = "hx4700:green",
+ .default_trigger = "unused",
+ },
+ [2] = {
+ .name = "hx4700:blue",
+ .default_trigger = "hx4700-radio",
+ },
+};
+
+static struct resource asic3_resources[] = {
+ /* GPIO part */
+ [0] = DEFINE_RES_MEM(ASIC3_PHYS, ASIC3_MAP_SIZE_16BIT),
+ [1] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ)),
+ /* SD part */
+ [2] = DEFINE_RES_MEM(ASIC3_SD_PHYS, ASIC3_MAP_SIZE_16BIT),
+ [3] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ)),
+};
+
+static struct asic3_platform_data asic3_platform_data = {
+ .gpio_config = asic3_gpio_config,
+ .gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
+ .irq_base = IRQ_BOARD_START,
+ .gpio_base = HX4700_ASIC3_GPIO_BASE,
+ .clock_rate = 4000000,
+ .leds = asic3_leds,
+};
+
+static struct platform_device asic3 = {
+ .name = "asic3",
+ .id = -1,
+ .resource = asic3_resources,
+ .num_resources = ARRAY_SIZE(asic3_resources),
+ .dev = {
+ .platform_data = &asic3_platform_data,
+ },
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+ [0] = DEFINE_RES_MEM(PXA_CS5_PHYS, 0x4),
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+ [0] = {
+ .reg_start = 0,
+ .gpio_base = HX4700_EGPIO_BASE,
+ .num_gpios = 8,
+ .direction = HTC_EGPIO_OUTPUT,
+ },
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+ .reg_width = 16,
+ .bus_width = 16,
+ .chip = egpio_chips,
+ .num_chips = ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device egpio = {
+ .name = "htc-egpio",
+ .id = -1,
+ .resource = egpio_resources,
+ .num_resources = ARRAY_SIZE(egpio_resources),
+ .dev = {
+ .platform_data = &egpio_info,
+ },
+};
+
+/*
+ * LCD - Sony display connected to ATI Imageon w3220
+ */
+
+static void sony_lcd_init(void)
+{
+ gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+ gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+ gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
+ gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+ mdelay(10);
+ gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+ mdelay(20);
+
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
+ mdelay(5);
+ gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
+
+ /* FIXME: init w3220 registers here */
+
+ mdelay(5);
+ gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
+ mdelay(10);
+ gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
+ mdelay(10);
+ gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
+ mdelay(10);
+ gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
+}
+
+static void sony_lcd_off(void)
+{
+ gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+ gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+ mdelay(10);
+ gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
+ mdelay(10);
+ gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+ mdelay(10);
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+}
+
+#ifdef CONFIG_PM
+static void w3220_lcd_suspend(struct w100fb_par *wfb)
+{
+ sony_lcd_off();
+}
+
+static void w3220_lcd_resume(struct w100fb_par *wfb)
+{
+ sony_lcd_init();
+}
+#else
+#define w3220_lcd_resume NULL
+#define w3220_lcd_suspend NULL
+#endif
+
+static struct w100_tg_info w3220_tg_info = {
+ .suspend = w3220_lcd_suspend,
+ .resume = w3220_lcd_resume,
+};
+
+/* W3220_VGA QVGA */
+static struct w100_gen_regs w3220_regs = {
+ .lcd_format = 0x00000003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00abf003, /* 0x00fff003 */
+ .genlcd_cntl2 = 0x00000003,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode w3220_modes[] = {
+{
+ .xres = 480,
+ .yres = 640,
+ .left_margin = 15,
+ .right_margin = 16,
+ .upper_margin = 8,
+ .lower_margin = 7,
+ .crtc_ss = 0x00000000,
+ .crtc_ls = 0xa1ff01f9, /* 0x21ff01f9 */
+ .crtc_gs = 0xc0000000, /* 0x40000000 */
+ .crtc_vpos_gs = 0x0000028f,
+ .crtc_ps1_active = 0x00000000, /* 0x41060010 */
+ .crtc_rev = 0,
+ .crtc_dclk = 0x80000000,
+ .crtc_gclk = 0x040a0104,
+ .crtc_goe = 0,
+ .pll_freq = 95,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+},
+{
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 9,
+ .right_margin = 8,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0xa0fb00f7,
+ .crtc_gs = 0xc0080007,
+ .crtc_vpos_gs = 0x00080007,
+ .crtc_rev = 0x0000000a,
+ .crtc_dclk = 0x81700030,
+ .crtc_gclk = 0x8015010f,
+ .crtc_goe = 0x00000000,
+ .pll_freq = 95,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+},
+};
+
+struct w100_mem_info w3220_mem_info = {
+ .ext_cntl = 0x09640011,
+ .sdram_mode_reg = 0x00600021,
+ .ext_timing_cntl = 0x1a001545, /* 0x15001545 */
+ .io_cntl = 0x7ddd7333,
+ .size = 0x1fffff,
+};
+
+struct w100_bm_mem_info w3220_bm_mem_info = {
+ .ext_mem_bw = 0x50413e01,
+ .offset = 0,
+ .ext_timing_ctl = 0x00043f7f,
+ .ext_cntl = 0x00000010,
+ .mode_reg = 0x00250000,
+ .io_cntl = 0x0fff0000,
+ .config = 0x08301480,
+};
+
+static struct w100_gpio_regs w3220_gpio_info = {
+ .init_data1 = 0xdfe00100, /* GPIO_DATA */
+ .gpio_dir1 = 0xffff0000, /* GPIO_CNTL1 */
+ .gpio_oe1 = 0x00000000, /* GPIO_CNTL2 */
+ .init_data2 = 0x00000000, /* GPIO_DATA2 */
+ .gpio_dir2 = 0x00000000, /* GPIO_CNTL3 */
+ .gpio_oe2 = 0x00000000, /* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info w3220_info = {
+ .tg = &w3220_tg_info,
+ .mem = &w3220_mem_info,
+ .bm_mem = &w3220_bm_mem_info,
+ .gpio = &w3220_gpio_info,
+ .regs = &w3220_regs,
+ .modelist = w3220_modes,
+ .num_modes = 2,
+ .xtal_freq = 16000000,
+};
+
+static struct resource w3220_resources[] = {
+ [0] = DEFINE_RES_MEM(ATI_W3220_PHYS, SZ_16M),
+};
+
+static struct platform_device w3220 = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &w3220_info,
+ },
+ .num_resources = ARRAY_SIZE(w3220_resources),
+ .resource = w3220_resources,
+};
+
+static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+ if (power)
+ sony_lcd_init();
+ else
+ sony_lcd_off();
+}
+
+static struct plat_lcd_data hx4700_lcd_data = {
+ .set_power = hx4700_lcd_set_power,
+};
+
+static struct platform_device hx4700_lcd = {
+ .name = "platform-lcd",
+ .id = -1,
+ .dev = {
+ .platform_data = &hx4700_lcd_data,
+ .parent = &w3220.dev,
+ },
+};
+
+/*
+ * Backlight
+ */
+
+static struct platform_pwm_backlight_data backlight_data = {
+ .max_brightness = 200,
+ .dft_brightness = 100,
+ .enable_gpio = -1,
+};
+
+static struct platform_device backlight = {
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .parent = &pxa27x_device_pwm1.dev,
+ .platform_data = &backlight_data,
+ },
+};
+
+static struct pwm_lookup hx4700_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL,
+ 30923, PWM_POLARITY_NORMAL),
+};
+
+/*
+ * USB "Transceiver"
+ */
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+ .gpio_pullup = GPIO76_HX4700_USBC_PUEN,
+ .gpio_vbus = GPIOD14_nUSBC_DETECT,
+ .gpio_vbus_inverted = 1,
+};
+
+static struct platform_device gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_vbus_info,
+ },
+};
+
+static struct pxa2xx_udc_mach_info hx4700_udc_info;
+
+/*
+ * Touchscreen - TSC2046 connected to SSP2
+ */
+
+static const struct ads7846_platform_data tsc2046_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .pressure_max = 1024,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .gpio_pendown = GPIO58_HX4700_TSC2046_nPENIRQ,
+};
+
+static struct pxa2xx_spi_chip tsc2046_chip = {
+ .tx_threshold = 1,
+ .rx_threshold = 2,
+ .timeout = 64,
+ .gpio_cs = GPIO88_HX4700_TSC2046_CS,
+};
+
+static struct spi_board_info tsc2046_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 2,
+ .max_speed_hz = 2600000, /* 100 kHz sample rate */
+ .irq = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ),
+ .platform_data = &tsc2046_info,
+ .controller_data = &tsc2046_chip,
+ },
+};
+
+static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+/*
+ * External power
+ */
+
+static int power_supply_init(struct device *dev)
+{
+ return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
+}
+
+static int hx4700_is_ac_online(void)
+{
+ return !gpio_get_value(GPIOD9_nAC_IN);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIOD9_nAC_IN);
+}
+
+static char *hx4700_supplicants[] = {
+ "ds2760-battery.0", "backup-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = hx4700_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = hx4700_supplicants,
+ .num_supplicants = ARRAY_SIZE(hx4700_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+ [0] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), 1, "ac",
+ IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
+ [1] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), 1, "usb",
+ IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+/*
+ * Battery charger
+ */
+
+static struct regulator_consumer_supply bq24022_consumers[] = {
+ REGULATOR_SUPPLY("vbus_draw", NULL),
+ REGULATOR_SUPPLY("ac_draw", NULL),
+};
+
+static struct regulator_init_data bq24022_init_data = {
+ .constraints = {
+ .max_uA = 500000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
+ .consumer_supplies = bq24022_consumers,
+};
+
+static struct gpio bq24022_gpios[] = {
+ { GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
+};
+
+static struct gpio_regulator_state bq24022_states[] = {
+ { .value = 100000, .gpios = (0 << 0) },
+ { .value = 500000, .gpios = (1 << 0) },
+};
+
+static struct gpio_regulator_config bq24022_info = {
+ .supply_name = "bq24022",
+
+ .enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
+ .enable_high = 0,
+ .enabled_at_boot = 0,
+
+ .gpios = bq24022_gpios,
+ .nr_gpios = ARRAY_SIZE(bq24022_gpios),
+
+ .states = bq24022_states,
+ .nr_states = ARRAY_SIZE(bq24022_states),
+
+ .type = REGULATOR_CURRENT,
+ .init_data = &bq24022_init_data,
+};
+
+static struct platform_device bq24022 = {
+ .name = "gpio-regulator",
+ .id = -1,
+ .dev = {
+ .platform_data = &bq24022_info,
+ },
+};
+
+/*
+ * StrataFlash
+ */
+
+static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
+{
+ gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
+}
+
+static struct resource strataflash_resource[] = {
+ [0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M),
+ [1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M),
+};
+
+static struct physmap_flash_data strataflash_data = {
+ .width = 4,
+ .set_vpp = hx4700_set_vpp,
+};
+
+static struct platform_device strataflash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = strataflash_resource,
+ .num_resources = ARRAY_SIZE(strataflash_resource),
+ .dev = {
+ .platform_data = &strataflash_data,
+ },
+};
+
+/*
+ * Maxim MAX1587A on PI2C
+ */
+
+static struct regulator_consumer_supply max1587a_consumer =
+ REGULATOR_SUPPLY("vcc_core", NULL);
+
+static struct regulator_init_data max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max1587a_consumer,
+};
+
+static struct max1586_subdev_data max1587a_subdev = {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &max1587a_v3_info,
+};
+
+static struct max1586_platform_data max1587a_info = {
+ .num_subdevs = 1,
+ .subdevs = &max1587a_subdev,
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &max1587a_info,
+ },
+};
+
+/*
+ * Asahi Kasei AK4641 on I2C
+ */
+
+static struct ak4641_platform_data ak4641_info = {
+ .gpio_power = GPIO27_HX4700_CODEC_ON,
+ .gpio_npdn = GPIO109_HX4700_CODEC_nPDN,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("ak4641", 0x12),
+ .platform_data = &ak4641_info,
+ },
+};
+
+static struct platform_device audio = {
+ .name = "hx4700-audio",
+ .id = -1,
+};
+
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+ &asic3,
+ &gpio_keys,
+ &navpoint,
+ &backlight,
+ &w3220,
+ &hx4700_lcd,
+ &egpio,
+ &bq24022,
+ &gpio_vbus,
+ &power_supply,
+ &strataflash,
+ &audio,
+};
+
+static struct gpio global_gpios[] = {
+ { GPIO12_HX4700_ASIC3_IRQ, GPIOF_IN, "ASIC3_IRQ" },
+ { GPIO13_HX4700_W3220_IRQ, GPIOF_IN, "W3220_IRQ" },
+ { GPIO14_HX4700_nWLAN_IRQ, GPIOF_IN, "WLAN_IRQ" },
+ { GPIO59_HX4700_LCD_PC1, GPIOF_OUT_INIT_HIGH, "LCD_PC1" },
+ { GPIO62_HX4700_LCD_nRESET, GPIOF_OUT_INIT_HIGH, "LCD_RESET" },
+ { GPIO70_HX4700_LCD_SLIN1, GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" },
+ { GPIO84_HX4700_LCD_SQN, GPIOF_OUT_INIT_HIGH, "LCD_SQN" },
+ { GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
+ { GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
+ { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+ { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
+ { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+ { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
+ { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+ { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
+};
+
+static void __init hx4700_init(void)
+{
+ int ret;
+
+ PCFR = PCFR_GPR_EN | PCFR_OPDE;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
+ gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
+ ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
+ if (ret)
+ pr_err ("hx4700: Failed to request GPIOs.\n");
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
+
+ pxa_set_ficp_info(&ficp_info);
+ pxa27x_set_i2c_power_info(NULL);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
+ i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
+ pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
+ spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
+
+ gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
+ mdelay(10);
+ gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
+ mdelay(10);
+
+ pxa_set_udc_info(&hx4700_udc_info);
+ regulator_has_full_constraints();
+}
+
+MACHINE_START(H4700, "HP iPAQ HX4700")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = HX4700_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_machine = hx4700_init,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
new file mode 100644
index 0000000..cbaf4f6
--- /dev/null
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -0,0 +1,200 @@
+/*
+ * linux/arch/arm/mach-pxa/icontrol.c
+ *
+ * Support for the iControl and SafeTcam platforms from TMT Services
+ * using the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa320.h"
+#include "mxm8x10.h"
+
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/can/platform/mcp251x.h>
+#include <linux/regulator/machine.h>
+
+#include "generic.h"
+
+#define ICONTROL_MCP251x_nCS1 (15)
+#define ICONTROL_MCP251x_nCS2 (16)
+#define ICONTROL_MCP251x_nCS3 (17)
+#define ICONTROL_MCP251x_nCS4 (24)
+
+#define ICONTROL_MCP251x_nIRQ1 (74)
+#define ICONTROL_MCP251x_nIRQ2 (75)
+#define ICONTROL_MCP251x_nIRQ3 (76)
+#define ICONTROL_MCP251x_nIRQ4 (77)
+
+static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
+ .tx_threshold = 8,
+ .rx_threshold = 128,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = ICONTROL_MCP251x_nCS1
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
+ .tx_threshold = 8,
+ .rx_threshold = 128,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = ICONTROL_MCP251x_nCS2
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
+ .tx_threshold = 8,
+ .rx_threshold = 128,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = ICONTROL_MCP251x_nCS3
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
+ .tx_threshold = 8,
+ .rx_threshold = 128,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = ICONTROL_MCP251x_nCS4
+};
+
+static struct mcp251x_platform_data mcp251x_info = {
+ .oscillator_frequency = 16E6,
+};
+
+static struct spi_board_info mcp251x_board_info[] = {
+ {
+ .modalias = "mcp2515",
+ .max_speed_hz = 6500000,
+ .bus_num = 3,
+ .chip_select = 0,
+ .platform_data = &mcp251x_info,
+ .controller_data = &mcp251x_chip_info1,
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
+ },
+ {
+ .modalias = "mcp2515",
+ .max_speed_hz = 6500000,
+ .bus_num = 3,
+ .chip_select = 1,
+ .platform_data = &mcp251x_info,
+ .controller_data = &mcp251x_chip_info2,
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
+ },
+ {
+ .modalias = "mcp2515",
+ .max_speed_hz = 6500000,
+ .bus_num = 4,
+ .chip_select = 0,
+ .platform_data = &mcp251x_info,
+ .controller_data = &mcp251x_chip_info3,
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
+ },
+ {
+ .modalias = "mcp2515",
+ .max_speed_hz = 6500000,
+ .bus_num = 4,
+ .chip_select = 1,
+ .platform_data = &mcp251x_info,
+ .controller_data = &mcp251x_chip_info4,
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
+ }
+};
+
+static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
+ .num_chipselect = 2,
+ .enable_dma = 1
+};
+
+static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
+ .num_chipselect = 2,
+ .enable_dma = 1
+};
+
+struct platform_device pxa_spi_ssp3 = {
+ .name = "pxa2xx-spi",
+ .id = 3,
+ .dev = {
+ .platform_data = &pxa_ssp3_spi_master_info,
+ }
+};
+
+struct platform_device pxa_spi_ssp4 = {
+ .name = "pxa2xx-spi",
+ .id = 4,
+ .dev = {
+ .platform_data = &pxa_ssp4_spi_master_info,
+ }
+};
+
+static struct platform_device *icontrol_spi_devices[] __initdata = {
+ &pxa_spi_ssp3,
+ &pxa_spi_ssp4,
+};
+
+static mfp_cfg_t mfp_can_cfg[] __initdata = {
+ /* CAN CS lines */
+ GPIO15_GPIO,
+ GPIO16_GPIO,
+ GPIO17_GPIO,
+ GPIO24_GPIO,
+
+ /* SPI (SSP3) lines */
+ GPIO89_SSP3_SCLK,
+ GPIO91_SSP3_TXD,
+ GPIO92_SSP3_RXD,
+
+ /* SPI (SSP4) lines */
+ GPIO93_SSP4_SCLK,
+ GPIO95_SSP4_TXD,
+ GPIO96_SSP4_RXD,
+
+ /* CAN nIRQ lines */
+ GPIO74_GPIO | MFP_LPM_EDGE_RISE,
+ GPIO75_GPIO | MFP_LPM_EDGE_RISE,
+ GPIO76_GPIO | MFP_LPM_EDGE_RISE,
+ GPIO77_GPIO | MFP_LPM_EDGE_RISE
+};
+
+static void __init icontrol_can_init(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
+ platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
+ spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
+}
+
+static void __init icontrol_init(void)
+{
+ mxm_8x10_barebones_init();
+ mxm_8x10_usb_host_init();
+ mxm_8x10_mmc_init();
+
+ icontrol_can_init();
+
+ regulator_has_full_constraints();
+}
+
+MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
+ .atag_offset = 0x100,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = icontrol_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
new file mode 100644
index 0000000..88e0068
--- /dev/null
+++ b/arch/arm/mach-pxa/idp.c
@@ -0,0 +1,294 @@
+/*
+ * linux/arch/arm/mach-pxa/idp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
+ *
+ * 2001-09-13: Cliff Brake <cbrake@accelent.com>
+ * Initial code
+ *
+ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
+ * <http://www.vibren.com> <http://bec-systems.com>
+ * Updated for 2.6 kernel
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "pxa25x.h"
+#include "idp.h"
+#include <linux/platform_data/video-pxafb.h>
+#include <mach/bitfield.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/smc91x.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/* TODO:
+ * - add pxa2xx_audio_ops_t device structure
+ * - Ethernet interrupt
+ */
+
+static unsigned long idp_pin_config[] __initdata = {
+ /* LCD */
+ GPIOxx_LCD_DSTN_16BPP,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+
+ /* Ethernet */
+ GPIO33_nCS_5, /* Ethernet CS */
+ GPIO4_GPIO, /* Ethernet IRQ */
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = (IDP_ETH_PHYS + 0x300),
+ .end = (IDP_ETH_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(4),
+ .end = PXA_GPIO_TO_IRQ(4),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata smc91x_platdata = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+ SMC91X_USE_DMA | SMC91X_NOWAIT,
+ .pxa_u16_align4 = true,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev.platform_data = &smc91x_platdata,
+};
+
+static void idp_backlight_power(int on)
+{
+ if (on) {
+ IDP_CPLD_LCD |= (1<<1);
+ } else {
+ IDP_CPLD_LCD &= ~(1<<1);
+ }
+}
+
+static void idp_vlcd(int on)
+{
+ if (on) {
+ IDP_CPLD_LCD |= (1<<2);
+ } else {
+ IDP_CPLD_LCD &= ~(1<<2);
+ }
+}
+
+static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+ if (on) {
+ IDP_CPLD_LCD |= (1<<0);
+ } else {
+ IDP_CPLD_LCD &= ~(1<<0);
+ }
+
+ /* call idp_vlcd for now as core driver does not support
+ * both power and vlcd hooks. Note, this is not technically
+ * the correct sequence, but seems to work. Disclaimer:
+ * this may eventually damage the display.
+ */
+
+ idp_vlcd(on);
+}
+
+static struct pxafb_mode_info sharp_lm8v31_mode = {
+ .pixclock = 270000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 3,
+ .right_margin = 3,
+ .vsync_len = 1,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info sharp_lm8v31 = {
+ .modes = &sharp_lm8v31_mode,
+ .num_modes = 1,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_AC_BIAS_FREQ(255),
+ .pxafb_backlight_power = &idp_backlight_power,
+ .pxafb_lcd_power = &idp_lcd_power
+};
+
+static struct pxamci_platform_data idp_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+static void __init idp_init(void)
+{
+ printk("idp_init()\n");
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ platform_device_register(&smc91x_device);
+ //platform_device_register(&mst_audio_device);
+ pxa_set_fb_info(NULL, &sharp_lm8v31);
+ pxa_set_mci_info(&idp_mci_platform_data);
+}
+
+static struct map_desc idp_io_desc[] __initdata = {
+ {
+ .virtual = IDP_COREVOLT_VIRT,
+ .pfn = __phys_to_pfn(IDP_COREVOLT_PHYS),
+ .length = IDP_COREVOLT_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IDP_CPLD_VIRT,
+ .pfn = __phys_to_pfn(IDP_CPLD_PHYS),
+ .length = IDP_CPLD_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init idp_map_io(void)
+{
+ pxa25x_map_io();
+ iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
+}
+
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct idp_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} idp_leds[] = {
+ { "idp:green", "heartbeat", },
+ { "idp:red", "cpu0", },
+};
+
+static void idp_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct idp_led *led = container_of(cdev,
+ struct idp_led, cdev);
+ u32 reg = IDP_CPLD_LED_CONTROL;
+
+ if (b != LED_OFF)
+ reg &= ~led->mask;
+ else
+ reg |= led->mask;
+
+ IDP_CPLD_LED_CONTROL = reg;
+}
+
+static enum led_brightness idp_led_get(struct led_classdev *cdev)
+{
+ struct idp_led *led = container_of(cdev,
+ struct idp_led, cdev);
+
+ return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init idp_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_pxa_idp())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
+ struct idp_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = idp_leds[i].name;
+ led->cdev.brightness_set = idp_led_set;
+ led->cdev.brightness_get = idp_led_get;
+ led->cdev.default_trigger = idp_leds[i].trigger;
+
+ if (i == 0)
+ led->mask = IDP_HB_LED;
+ else
+ led->mask = IDP_BUSY_LED;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(idp_leds_init);
+#endif
+
+MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
+ /* Maintainer: Vibren Technologies */
+ .map_io = idp_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = idp_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.h b/arch/arm/mach-pxa/idp.h
new file mode 100644
index 0000000..7182ff9
--- /dev/null
+++ b/arch/arm/mach-pxa/idp.h
@@ -0,0 +1,198 @@
+/*
+ * arch/arm/mach-pxa/include/mach/idp.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
+ *
+ * 2001-09-13: Cliff Brake <cbrake@accelent.com>
+ * Initial code
+ *
+ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
+ * <http://www.vibren.com> <http://bec-systems.com>
+ * Changes for 2.6 kernel.
+ */
+
+
+/*
+ * Note: this file must be safe to include in assembly files
+ *
+ * Support for the Vibren PXA255 IDP requires rev04 or later
+ * IDP hardware.
+ */
+
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+
+#define IDP_FLASH_PHYS (PXA_CS0_PHYS)
+#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS)
+#define IDP_MEDIAQ_PHYS (PXA_CS3_PHYS)
+#define IDP_IDE_PHYS (PXA_CS5_PHYS + 0x03000000)
+#define IDP_ETH_PHYS (PXA_CS5_PHYS + 0x03400000)
+#define IDP_COREVOLT_PHYS (PXA_CS5_PHYS + 0x03800000)
+#define IDP_CPLD_PHYS (PXA_CS5_PHYS + 0x03C00000)
+
+
+/*
+ * virtual memory map
+ */
+
+#define IDP_COREVOLT_VIRT (0xf0000000)
+#define IDP_COREVOLT_SIZE (1*1024*1024)
+
+#define IDP_CPLD_VIRT (IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
+#define IDP_CPLD_SIZE (1*1024*1024)
+
+#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
+#error Your custom IO space is getting a bit large !!
+#endif
+
+#define CPLD_P2V(x) ((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
+#define CPLD_V2P(x) ((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __CPLD_REG(x) (*((volatile unsigned long *)CPLD_P2V(x)))
+#else
+# define __CPLD_REG(x) CPLD_P2V(x)
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
+
+#define _IDP_CPLD_REV (IDP_CPLD_PHYS + 0x00)
+#define _IDP_CPLD_PERIPH_PWR (IDP_CPLD_PHYS + 0x04)
+#define _IDP_CPLD_LED_CONTROL (IDP_CPLD_PHYS + 0x08)
+#define _IDP_CPLD_KB_COL_HIGH (IDP_CPLD_PHYS + 0x0C)
+#define _IDP_CPLD_KB_COL_LOW (IDP_CPLD_PHYS + 0x10)
+#define _IDP_CPLD_PCCARD_EN (IDP_CPLD_PHYS + 0x14)
+#define _IDP_CPLD_GPIOH_DIR (IDP_CPLD_PHYS + 0x18)
+#define _IDP_CPLD_GPIOH_VALUE (IDP_CPLD_PHYS + 0x1C)
+#define _IDP_CPLD_GPIOL_DIR (IDP_CPLD_PHYS + 0x20)
+#define _IDP_CPLD_GPIOL_VALUE (IDP_CPLD_PHYS + 0x24)
+#define _IDP_CPLD_PCCARD_PWR (IDP_CPLD_PHYS + 0x28)
+#define _IDP_CPLD_MISC_CTRL (IDP_CPLD_PHYS + 0x2C)
+#define _IDP_CPLD_LCD (IDP_CPLD_PHYS + 0x30)
+#define _IDP_CPLD_FLASH_WE (IDP_CPLD_PHYS + 0x34)
+
+#define _IDP_CPLD_KB_ROW (IDP_CPLD_PHYS + 0x50)
+#define _IDP_CPLD_PCCARD0_STATUS (IDP_CPLD_PHYS + 0x54)
+#define _IDP_CPLD_PCCARD1_STATUS (IDP_CPLD_PHYS + 0x58)
+#define _IDP_CPLD_MISC_STATUS (IDP_CPLD_PHYS + 0x5C)
+
+/* FPGA register virtual addresses */
+
+#define IDP_CPLD_REV __CPLD_REG(_IDP_CPLD_REV)
+#define IDP_CPLD_PERIPH_PWR __CPLD_REG(_IDP_CPLD_PERIPH_PWR)
+#define IDP_CPLD_LED_CONTROL __CPLD_REG(_IDP_CPLD_LED_CONTROL)
+#define IDP_CPLD_KB_COL_HIGH __CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
+#define IDP_CPLD_KB_COL_LOW __CPLD_REG(_IDP_CPLD_KB_COL_LOW)
+#define IDP_CPLD_PCCARD_EN __CPLD_REG(_IDP_CPLD_PCCARD_EN)
+#define IDP_CPLD_GPIOH_DIR __CPLD_REG(_IDP_CPLD_GPIOH_DIR)
+#define IDP_CPLD_GPIOH_VALUE __CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
+#define IDP_CPLD_GPIOL_DIR __CPLD_REG(_IDP_CPLD_GPIOL_DIR)
+#define IDP_CPLD_GPIOL_VALUE __CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
+#define IDP_CPLD_PCCARD_PWR __CPLD_REG(_IDP_CPLD_PCCARD_PWR)
+#define IDP_CPLD_MISC_CTRL __CPLD_REG(_IDP_CPLD_MISC_CTRL)
+#define IDP_CPLD_LCD __CPLD_REG(_IDP_CPLD_LCD)
+#define IDP_CPLD_FLASH_WE __CPLD_REG(_IDP_CPLD_FLASH_WE)
+
+#define IDP_CPLD_KB_ROW __CPLD_REG(_IDP_CPLD_KB_ROW)
+#define IDP_CPLD_PCCARD0_STATUS __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
+#define IDP_CPLD_PCCARD1_STATUS __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
+#define IDP_CPLD_MISC_STATUS __CPLD_REG(_IDP_CPLD_MISC_STATUS)
+
+
+/*
+ * Bit masks for various registers
+ */
+
+// IDP_CPLD_PCCARD_PWR
+#define PCC0_PWR0 (1 << 0)
+#define PCC0_PWR1 (1 << 1)
+#define PCC0_PWR2 (1 << 2)
+#define PCC0_PWR3 (1 << 3)
+#define PCC1_PWR0 (1 << 4)
+#define PCC1_PWR1 (1 << 5)
+#define PCC1_PWR2 (1 << 6)
+#define PCC1_PWR3 (1 << 7)
+
+// IDP_CPLD_PCCARD_EN
+#define PCC0_RESET (1 << 6)
+#define PCC1_RESET (1 << 7)
+#define PCC0_ENABLE (1 << 0)
+#define PCC1_ENABLE (1 << 1)
+
+// IDP_CPLD_PCCARDx_STATUS
+#define _PCC_WRPROT (1 << 7) // 7-4 read as low true
+#define _PCC_RESET (1 << 6)
+#define _PCC_IRQ (1 << 5)
+#define _PCC_INPACK (1 << 4)
+#define PCC_BVD2 (1 << 3)
+#define PCC_BVD1 (1 << 2)
+#define PCC_VS2 (1 << 1)
+#define PCC_VS1 (1 << 0)
+
+/* A listing of interrupts used by external hardware devices */
+
+#define TOUCH_PANEL_IRQ PXA_GPIO_TO_IRQ(5)
+#define IDE_IRQ PXA_GPIO_TO_IRQ(21)
+
+#define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+
+#define ETHERNET_IRQ PXA_GPIO_TO_IRQ(4)
+#define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+
+#define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+
+#define PCMCIA_S0_CD_VALID PXA_GPIO_TO_IRQ(7)
+#define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S1_CD_VALID PXA_GPIO_TO_IRQ(8)
+#define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S0_RDYINT PXA_GPIO_TO_IRQ(19)
+#define PCMCIA_S1_RDYINT PXA_GPIO_TO_IRQ(22)
+
+
+/*
+ * Macros for LED Driver
+ */
+
+/* leds 0 = ON */
+#define IDP_HB_LED (1<<5)
+#define IDP_BUSY_LED (1<<6)
+
+#define IDP_LEDS_MASK (IDP_HB_LED | IDP_BUSY_LED)
+
+/*
+ * macros for MTD driver
+ */
+
+#define FLASH_WRITE_PROTECT_DISABLE() ((IDP_CPLD_FLASH_WE) &= ~(0x1))
+#define FLASH_WRITE_PROTECT_ENABLE() ((IDP_CPLD_FLASH_WE) |= (0x1))
+
+/*
+ * macros for matrix keyboard driver
+ */
+
+#define KEYBD_MATRIX_NUMBER_INPUTS 7
+#define KEYBD_MATRIX_NUMBER_OUTPUTS 14
+
+#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC FALSE
+#define KEYBD_MATRIX_INVERT_INPUT_LOGIC FALSE
+
+#define KEYBD_MATRIX_SETTLING_TIME_US 100
+#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT 2
+
+#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
+{\
+ IDP_CPLD_KB_COL_LOW = outputs;\
+ IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
+}
+
+#define KEYBD_MATRIX_GET_INPUTS(inputs) \
+{\
+ inputs = (IDP_CPLD_KB_ROW & 0x7f);\
+}
+
+
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h
new file mode 100644
index 0000000..93cfe7d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/*
+ * Chip Selects
+ */
+#define PXA_CS0_PHYS 0x00000000
+#define PXA_CS1_PHYS 0x04000000
+#define PXA_CS2_PHYS 0x08000000
+#define PXA_CS3_PHYS 0x0C000000
+#define PXA_CS4_PHYS 0x10000000
+#define PXA_CS5_PHYS 0x14000000
+
+#define PXA300_CS0_PHYS 0x00000000 /* PXA300/PXA310 _only_ */
+#define PXA300_CS1_PHYS 0x30000000 /* PXA300/PXA310 _only_ */
+#define PXA3xx_CS2_PHYS 0x10000000
+#define PXA3xx_CS3_PHYS 0x14000000
+
+/*
+ * Peripheral Bus
+ */
+#define PERIPH_PHYS 0x40000000
+#define PERIPH_VIRT IOMEM(0xf2000000)
+#define PERIPH_SIZE 0x02000000
+
+/*
+ * Static Memory Controller (w/ SDRAM controls on PXA25x/PXA27x)
+ */
+#define PXA2XX_SMEMC_PHYS 0x48000000
+#define PXA3XX_SMEMC_PHYS 0x4a000000
+#define SMEMC_VIRT IOMEM(0xf6000000)
+#define SMEMC_SIZE 0x00100000
+
+/*
+ * Dynamic Memory Controller (only on PXA3xx)
+ */
+#define DMEMC_PHYS 0x48100000
+#define DMEMC_VIRT IOMEM(0xf6100000)
+#define DMEMC_SIZE 0x00100000
+
+/*
+ * Reserved space for low level debug virtual addresses within
+ * 0xf6200000..0xf6201000
+ */
+
+/*
+ * DFI Bus for NAND, PXA3xx only
+ */
+#define NAND_PHYS 0x43100000
+#define NAND_VIRT IOMEM(0xf6300000)
+#define NAND_SIZE 0x00100000
+
+/*
+ * Internal Memory Controller (PXA27x and later)
+ */
+#define IMEMC_PHYS 0x58000000
+#define IMEMC_VIRT IOMEM(0xfe000000)
+#define IMEMC_SIZE 0x00100000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
new file mode 100644
index 0000000..7beebf7
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_AUDIO_H__
+#define __ASM_ARCH_AUDIO_H__
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+
+/*
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ * a -1 value means no gpio will be used for reset
+ * @codec_pdata: AC97 codec platform_data
+
+ * reset_gpio should only be specified for pxa27x CPUs where a silicon
+ * bug prevents correct operation of the reset line. If not specified,
+ * the default behaviour on these CPUs is to consider gpio 113 as the
+ * AC97 reset line, which is the default on most boards.
+ */
+typedef struct {
+ int (*startup)(struct snd_pcm_substream *, void *);
+ void (*shutdown)(struct snd_pcm_substream *, void *);
+ void (*suspend)(void *);
+ void (*resume)(void *);
+ void *priv;
+ int reset_gpio;
+ void *codec_pdata[AC97_BUS_MAX_DEVICES];
+} pxa2xx_audio_ops_t;
+
+extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
new file mode 100644
index 0000000..1b08259
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -0,0 +1,184 @@
+/*
+ * linux/include/asm-arm/arch-pxa/balloon3.h
+ *
+ * Authors: Nick Bane and Wookey
+ * Created: Oct, 2005
+ * Copyright: Toby Churchill Ltd
+ * Cribbed from mainstone.c, by Nicholas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_BALLOON3_H
+#define ASM_ARCH_BALLOON3_H
+
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
+enum balloon3_features {
+ BALLOON3_FEATURE_OHCI,
+ BALLOON3_FEATURE_MMC,
+ BALLOON3_FEATURE_CF,
+ BALLOON3_FEATURE_AUDIO,
+ BALLOON3_FEATURE_TOPPOLY,
+};
+
+#define BALLOON3_FPGA_PHYS PXA_CS4_PHYS
+#define BALLOON3_FPGA_VIRT IOMEM(0xf1000000) /* as per balloon2 */
+#define BALLOON3_FPGA_LENGTH 0x01000000
+
+#define BALLOON3_FPGA_SETnCLR (0x1000)
+
+/* FPGA / CPLD registers for CF socket */
+#define BALLOON3_CF_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
+#define BALLOON3_CF_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
+/* FPGA / CPLD version register */
+#define BALLOON3_FPGA_VER (BALLOON3_FPGA_VIRT + 0x00e0001c)
+/* FPGA / CPLD registers for NAND flash */
+#define BALLOON3_NAND_BASE (PXA_CS4_PHYS + 0x00e00000)
+#define BALLOON3_NAND_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
+#define BALLOON3_NAND_CONTROL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
+#define BALLOON3_NAND_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
+
+/* fpga/cpld interrupt control register */
+#define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C)
+#define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c)
+
+#define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000)
+#define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004)
+#define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c)
+
+/* CF Status Register bits (read-only) bits */
+#define BALLOON3_CF_nIRQ (1 << 0)
+#define BALLOON3_CF_nSTSCHG_BVD1 (1 << 1)
+
+/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
+#define BALLOON3_CF_RESET (1 << 0)
+#define BALLOON3_CF_ENABLE (1 << 1)
+#define BALLOON3_CF_ADD_ENABLE (1 << 2)
+
+/* CF Interrupt sources */
+#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
+
+/* NAND Control register */
+#define BALLOON3_NAND_CONTROL_FLWP (1 << 7)
+#define BALLOON3_NAND_CONTROL_FLSE (1 << 6)
+#define BALLOON3_NAND_CONTROL_FLCE3 (1 << 5)
+#define BALLOON3_NAND_CONTROL_FLCE2 (1 << 4)
+#define BALLOON3_NAND_CONTROL_FLCE1 (1 << 3)
+#define BALLOON3_NAND_CONTROL_FLCE0 (1 << 2)
+#define BALLOON3_NAND_CONTROL_FLALE (1 << 1)
+#define BALLOON3_NAND_CONTROL_FLCLE (1 << 0)
+
+/* NAND Status register */
+#define BALLOON3_NAND_STAT_RNB (1 << 0)
+
+/* NAND Control2 register */
+#define BALLOON3_NAND_CONTROL2_16BIT (1 << 0)
+
+/* GPIOs for irqs */
+#define BALLOON3_GPIO_AUX_NIRQ (94)
+#define BALLOON3_GPIO_CODEC_IRQ (95)
+
+/* Timer and Idle LED locations */
+#define BALLOON3_GPIO_LED_NAND (9)
+#define BALLOON3_GPIO_LED_IDLE (10)
+
+/* backlight control */
+#define BALLOON3_GPIO_RUN_BACKLIGHT (99)
+
+#define BALLOON3_GPIO_S0_CD (105)
+
+/* NAND */
+#define BALLOON3_GPIO_RUN_NAND (102)
+
+/* PCF8574A Leds */
+#define BALLOON3_PCF_GPIO_BASE 160
+#define BALLOON3_PCF_GPIO_LED0 (BALLOON3_PCF_GPIO_BASE + 0)
+#define BALLOON3_PCF_GPIO_LED1 (BALLOON3_PCF_GPIO_BASE + 1)
+#define BALLOON3_PCF_GPIO_LED2 (BALLOON3_PCF_GPIO_BASE + 2)
+#define BALLOON3_PCF_GPIO_LED3 (BALLOON3_PCF_GPIO_BASE + 3)
+#define BALLOON3_PCF_GPIO_LED4 (BALLOON3_PCF_GPIO_BASE + 4)
+#define BALLOON3_PCF_GPIO_LED5 (BALLOON3_PCF_GPIO_BASE + 5)
+#define BALLOON3_PCF_GPIO_LED6 (BALLOON3_PCF_GPIO_BASE + 6)
+#define BALLOON3_PCF_GPIO_LED7 (BALLOON3_PCF_GPIO_BASE + 7)
+
+/* FPGA Interrupt Mask/Acknowledge Register */
+#define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */
+#define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */
+
+/* CPLD (and FPGA) interface definitions */
+#define CPLD_LCD0_DATA_SET 0x00
+#define CPLD_LCD0_DATA_CLR 0x10
+#define CPLD_LCD0_COMMAND_SET 0x01
+#define CPLD_LCD0_COMMAND_CLR 0x11
+#define CPLD_LCD1_DATA_SET 0x02
+#define CPLD_LCD1_DATA_CLR 0x12
+#define CPLD_LCD1_COMMAND_SET 0x03
+#define CPLD_LCD1_COMMAND_CLR 0x13
+
+#define CPLD_MISC_SET 0x07
+#define CPLD_MISC_CLR 0x17
+#define CPLD_MISC_LOON_NRESET_BIT 0
+#define CPLD_MISC_LOON_UNSUSP_BIT 1
+#define CPLD_MISC_RUN_5V_BIT 2
+#define CPLD_MISC_CHG_D0_BIT 3
+#define CPLD_MISC_CHG_D1_BIT 4
+#define CPLD_MISC_DAC_NCS_BIT 5
+
+#define CPLD_LCD_SET 0x08
+#define CPLD_LCD_CLR 0x18
+#define CPLD_LCD_BACKLIGHT_EN_0_BIT 0
+#define CPLD_LCD_BACKLIGHT_EN_1_BIT 1
+#define CPLD_LCD_LED_RED_BIT 4
+#define CPLD_LCD_LED_GREEN_BIT 5
+#define CPLD_LCD_NRESET_BIT 7
+
+#define CPLD_LCD_RO_SET 0x09
+#define CPLD_LCD_RO_CLR 0x19
+#define CPLD_LCD_RO_LCD0_nWAIT_BIT 0
+#define CPLD_LCD_RO_LCD1_nWAIT_BIT 1
+
+#define CPLD_SERIAL_SET 0x0a
+#define CPLD_SERIAL_CLR 0x1a
+#define CPLD_SERIAL_GSM_RI_BIT 0
+#define CPLD_SERIAL_GSM_CTS_BIT 1
+#define CPLD_SERIAL_GSM_DTR_BIT 2
+#define CPLD_SERIAL_LPR_CTS_BIT 3
+#define CPLD_SERIAL_TC232_CTS_BIT 4
+#define CPLD_SERIAL_TC232_DSR_BIT 5
+
+#define CPLD_SROUTING_SET 0x0b
+#define CPLD_SROUTING_CLR 0x1b
+#define CPLD_SROUTING_MSP430_LPR 0
+#define CPLD_SROUTING_MSP430_TC232 1
+#define CPLD_SROUTING_MSP430_GSM 2
+#define CPLD_SROUTING_LOON_LPR (0 << 4)
+#define CPLD_SROUTING_LOON_TC232 (1 << 4)
+#define CPLD_SROUTING_LOON_GSM (2 << 4)
+
+#define CPLD_AROUTING_SET 0x0c
+#define CPLD_AROUTING_CLR 0x1c
+#define CPLD_AROUTING_MIC2PHONE_BIT 0
+#define CPLD_AROUTING_PHONE2INT_BIT 1
+#define CPLD_AROUTING_PHONE2EXT_BIT 2
+#define CPLD_AROUTING_LOONL2INT_BIT 3
+#define CPLD_AROUTING_LOONL2EXT_BIT 4
+#define CPLD_AROUTING_LOONR2PHONE_BIT 5
+#define CPLD_AROUTING_LOONR2INT_BIT 6
+#define CPLD_AROUTING_LOONR2EXT_BIT 7
+
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
+
+#define BALLOON3_AUX_NIRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ)
+
+#define BALLOON3_NR_IRQS (IRQ_BOARD_START + 16)
+
+extern int balloon3_has(enum balloon3_features feature);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h
new file mode 100644
index 0000000..fe2ca44
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/bitfield.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * FILE bitfield.h
+ *
+ * Version 1.1
+ * Author Copyright (c) Marc A. Viredaz, 1998
+ * DEC Western Research Laboratory, Palo Alto, CA
+ * Date April 1998 (April 1997)
+ * System Advanced RISC Machine (ARM)
+ * Language C or ARM Assembly
+ * Purpose Definition of macros to operate on bit fields.
+ */
+
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data) ((unsigned long) (Data))
+#else
+#define UData(Data) (Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ * The macro "Fld" encodes a bit field, given its size and its shift value
+ * with respect to bit 0.
+ *
+ * Note
+ * A more intuitive way to encode bit fields would have been to use their
+ * mask. However, extracting size and shift value information from a bit
+ * field's mask is cumbersome and might break the assembler (255-character
+ * line-size limit).
+ *
+ * Input
+ * Size Size of the bit field, in number of bits.
+ * Shft Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ * Fld Encoded bit field.
+ */
+
+#define Fld(Size, Shft) (((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ * the size, shift value, mask, aligned mask, and first bit of a
+ * bit field.
+ *
+ * Input
+ * Field Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ * FSize Size of the bit field, in number of bits.
+ * FShft Shift value of the bit field with respect to bit 0.
+ * FMsk Mask for the bit field.
+ * FAlnMsk Mask for the bit field, aligned on bit 0.
+ * F1stBit First bit of the bit field.
+ */
+
+#define FSize(Field) ((Field) >> 16)
+#define FShft(Field) ((Field) & 0x0000FFFF)
+#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field) (UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ * The macro "FInsrt" inserts a value into a bit field by shifting the
+ * former appropriately.
+ *
+ * Input
+ * Value Bit-field value.
+ * Field Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ * FInsrt Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+ (UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ * The macro "FExtr" extracts the value of a bit field by masking and
+ * shifting it appropriately.
+ *
+ * Input
+ * Data Data containing the bit-field to be extracted.
+ * Field Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ * FExtr Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+ ((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
new file mode 100644
index 0000000..c030d95
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -0,0 +1,114 @@
+/*
+ * Hardware specific definitions for SL-C7xx series of PDAs
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_CORGI_H
+#define __ASM_ARCH_CORGI_H 1
+
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
+/*
+ * Corgi (Non Standard) GPIO Definitions
+ */
+#define CORGI_GPIO_KEY_INT (0) /* Keyboard Interrupt */
+#define CORGI_GPIO_AC_IN (1) /* Charger Detection */
+#define CORGI_GPIO_WAKEUP (3) /* System wakeup notification? */
+#define CORGI_GPIO_AK_INT (4) /* Headphone Jack Control Interrupt */
+#define CORGI_GPIO_TP_INT (5) /* Touch Panel Interrupt */
+#define CORGI_GPIO_nSD_WP (7) /* SD Write Protect? */
+#define CORGI_GPIO_nSD_DETECT (9) /* MMC/SD Card Detect */
+#define CORGI_GPIO_nSD_INT (10) /* SD Interrupt for SDIO? */
+#define CORGI_GPIO_MAIN_BAT_LOW (11) /* Main Battery Low Notification */
+#define CORGI_GPIO_BAT_COVER (11) /* Battery Cover Detect */
+#define CORGI_GPIO_LED_ORANGE (13) /* Orange LED Control */
+#define CORGI_GPIO_CF_CD (14) /* Compact Flash Card Detect */
+#define CORGI_GPIO_CHRG_FULL (16) /* Charging Complete Notification */
+#define CORGI_GPIO_CF_IRQ (17) /* Compact Flash Interrupt */
+#define CORGI_GPIO_LCDCON_CS (19) /* LCD Control Chip Select */
+#define CORGI_GPIO_MAX1111_CS (20) /* MAX1111 Chip Select */
+#define CORGI_GPIO_ADC_TEMP_ON (21) /* Select battery voltage or temperature */
+#define CORGI_GPIO_IR_ON (22) /* Enable IR Transceiver */
+#define CORGI_GPIO_ADS7846_CS (24) /* ADS7846 Chip Select */
+#define CORGI_GPIO_SD_PWR (33) /* MMC/SD Power */
+#define CORGI_GPIO_CHRG_ON (38) /* Enable battery Charging */
+#define CORGI_GPIO_DISCHARGE_ON (42) /* Enable battery Discharge */
+#define CORGI_GPIO_CHRG_UKN (43) /* Unknown Charging (Bypass Control?) */
+#define CORGI_GPIO_HSYNC (44) /* LCD HSync Pulse */
+#define CORGI_GPIO_USB_PULLUP (45) /* USB show presence to host */
+
+
+/*
+ * Corgi Keyboard Definitions
+ */
+#define CORGI_KEY_STROBE_NUM (12)
+#define CORGI_KEY_SENSE_NUM (8)
+#define CORGI_GPIO_ALL_STROBE_BIT (0x00003ffc)
+#define CORGI_GPIO_HIGH_SENSE_BIT (0xfc000000)
+#define CORGI_GPIO_HIGH_SENSE_RSHIFT (26)
+#define CORGI_GPIO_LOW_SENSE_BIT (0x00000003)
+#define CORGI_GPIO_LOW_SENSE_LSHIFT (6)
+#define CORGI_GPIO_STROBE_BIT(a) GPIO_bit(66+(a))
+#define CORGI_GPIO_SENSE_BIT(a) GPIO_bit(58+(a))
+#define CORGI_GAFR_ALL_STROBE_BIT (0x0ffffff0)
+#define CORGI_GAFR_HIGH_SENSE_BIT (0xfff00000)
+#define CORGI_GAFR_LOW_SENSE_BIT (0x0000000f)
+#define CORGI_GPIO_KEY_SENSE(a) (58+(a))
+#define CORGI_GPIO_KEY_STROBE(a) (66+(a))
+
+
+/*
+ * Corgi Interrupts
+ */
+#define CORGI_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(0)
+#define CORGI_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1)
+#define CORGI_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(3)
+#define CORGI_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(4)
+#define CORGI_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5)
+#define CORGI_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9)
+#define CORGI_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(10)
+#define CORGI_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(11)
+#define CORGI_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14)
+#define CORGI_IRQ_GPIO_CHRG_FULL PXA_GPIO_TO_IRQ(16) /* Battery fully charged */
+#define CORGI_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17)
+#define CORGI_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(58+(a)) /* Keyboard Sense lines */
+
+
+/*
+ * Corgi SCOOP GPIOs and Config
+ */
+#define CORGI_SCP_LED_GREEN SCOOP_GPCR_PA11
+#define CORGI_SCP_SWA SCOOP_GPCR_PA12 /* Hinge Switch A */
+#define CORGI_SCP_SWB SCOOP_GPCR_PA13 /* Hinge Switch B */
+#define CORGI_SCP_MUTE_L SCOOP_GPCR_PA14
+#define CORGI_SCP_MUTE_R SCOOP_GPCR_PA15
+#define CORGI_SCP_AKIN_PULLUP SCOOP_GPCR_PA16
+#define CORGI_SCP_APM_ON SCOOP_GPCR_PA17
+#define CORGI_SCP_BACKLIGHT_CONT SCOOP_GPCR_PA18
+#define CORGI_SCP_MIC_BIAS SCOOP_GPCR_PA19
+
+#define CORGI_SCOOP_IO_DIR ( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
+ CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
+ CORGI_SCP_MIC_BIAS )
+#define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
+
+#define CORGI_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
+#define CORGI_GPIO_LED_GREEN (CORGI_SCOOP_GPIO_BASE + 0)
+#define CORGI_GPIO_SWA (CORGI_SCOOP_GPIO_BASE + 1) /* Hinge Switch A */
+#define CORGI_GPIO_SWB (CORGI_SCOOP_GPIO_BASE + 2) /* Hinge Switch B */
+#define CORGI_GPIO_MUTE_L (CORGI_SCOOP_GPIO_BASE + 3)
+#define CORGI_GPIO_MUTE_R (CORGI_SCOOP_GPIO_BASE + 4)
+#define CORGI_GPIO_AKIN_PULLUP (CORGI_SCOOP_GPIO_BASE + 5)
+#define CORGI_GPIO_APM_ON (CORGI_SCOOP_GPIO_BASE + 6)
+#define CORGI_GPIO_BACKLIGHT_CONT (CORGI_SCOOP_GPIO_BASE + 7)
+#define CORGI_GPIO_MIC_BIAS (CORGI_SCOOP_GPIO_BASE + 8)
+
+#endif /* __ASM_ARCH_CORGI_H */
+
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
new file mode 100644
index 0000000..20026bd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pxa/include/mach/dma.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <mach/hardware.h>
+
+/* DMA Controller Registers Definitions */
+#define DMAC_REGS_VIRT io_p2v(0x40000000)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
new file mode 100644
index 0000000..f3e5509
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -0,0 +1,67 @@
+/*
+ * eseries-gpio.h
+ *
+ * Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/* e-series power button */
+#define GPIO_ESERIES_POWERBTN 0
+
+/* UDC GPIO definitions */
+#define GPIO_E7XX_USB_DISC 13
+#define GPIO_E7XX_USB_PULLUP 3
+
+#define GPIO_E800_USB_DISC 4
+#define GPIO_E800_USB_PULLUP 84
+
+/* e740 PCMCIA GPIO definitions */
+/* Note: PWR1 seems to be inverted */
+#define GPIO_E740_PCMCIA_CD0 8
+#define GPIO_E740_PCMCIA_CD1 44
+#define GPIO_E740_PCMCIA_RDY0 11
+#define GPIO_E740_PCMCIA_RDY1 6
+#define GPIO_E740_PCMCIA_RST0 27
+#define GPIO_E740_PCMCIA_RST1 24
+#define GPIO_E740_PCMCIA_PWR0 20
+#define GPIO_E740_PCMCIA_PWR1 23
+
+/* e750 PCMCIA GPIO definitions */
+#define GPIO_E750_PCMCIA_CD0 8
+#define GPIO_E750_PCMCIA_RDY0 12
+#define GPIO_E750_PCMCIA_RST0 27
+#define GPIO_E750_PCMCIA_PWR0 20
+
+/* e800 PCMCIA GPIO definitions */
+#define GPIO_E800_PCMCIA_RST0 69
+#define GPIO_E800_PCMCIA_RST1 72
+#define GPIO_E800_PCMCIA_PWR0 20
+#define GPIO_E800_PCMCIA_PWR1 73
+
+/* e7xx IrDA power control */
+#define GPIO_E7XX_IR_OFF 38
+
+/* e740 audio control GPIOs */
+#define GPIO_E740_WM9705_nAVDD2 16
+#define GPIO_E740_MIC_ON 40
+#define GPIO_E740_AMP_ON 41
+
+/* e750 audio control GPIOs */
+#define GPIO_E750_HP_AMP_OFF 4
+#define GPIO_E750_SPK_AMP_OFF 7
+#define GPIO_E750_HP_DETECT 37
+
+/* e800 audio control GPIOs */
+#define GPIO_E800_HP_DETECT 81
+#define GPIO_E800_HP_AMP_OFF 82
+#define GPIO_E800_SPK_AMP_ON 83
+
+/* ASIC related GPIOs */
+#define GPIO_ESERIES_TMIO_IRQ 5
+#define GPIO_ESERIES_TMIO_PCLR 19
+#define GPIO_ESERIES_TMIO_SUSPEND 45
+#define GPIO_E800_ANGELX_IRQ 8
diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h
new file mode 100644
index 0000000..665542e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/generic.h
@@ -0,0 +1 @@
+#include "../../generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
new file mode 100644
index 0000000..5506412
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -0,0 +1,308 @@
+/*
+ * arch/arm/mach-pxa/include/mach/hardware.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/addr-map.h>
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0 0xfe000000
+#define UNCACHED_PHYS_0_SIZE 0x00100000
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+
+#ifndef __ASSEMBLY__
+# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x)))
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+ especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y) \
+ (*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
+
+# define __PREG(x) (io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x) io_p2v(x)
+# define __PREG(x) io_v2p(x)
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/cputype.h>
+
+/*
+ * CPU Stepping CPU_ID JTAG_ID
+ *
+ * PXA210 B0 0x69052922 0x2926C013
+ * PXA210 B1 0x69052923 0x3926C013
+ * PXA210 B2 0x69052924 0x4926C013
+ * PXA210 C0 0x69052D25 0x5926C013
+ *
+ * PXA250 A0 0x69052100 0x09264013
+ * PXA250 A1 0x69052101 0x19264013
+ * PXA250 B0 0x69052902 0x29264013
+ * PXA250 B1 0x69052903 0x39264013
+ * PXA250 B2 0x69052904 0x49264013
+ * PXA250 C0 0x69052D05 0x59264013
+ *
+ * PXA255 A0 0x69052D06 0x69264013
+ *
+ * PXA26x A0 0x69052903 0x39264013
+ * PXA26x B0 0x69052D05 0x59264013
+ *
+ * PXA27x A0 0x69054110 0x09265013
+ * PXA27x A1 0x69054111 0x19265013
+ * PXA27x B0 0x69054112 0x29265013
+ * PXA27x B1 0x69054113 0x39265013
+ * PXA27x C0 0x69054114 0x49265013
+ * PXA27x C5 0x69054117 0x79265013
+ *
+ * PXA30x A0 0x69056880 0x0E648013
+ * PXA30x A1 0x69056881 0x1E648013
+ * PXA31x A0 0x69056890 0x0E649013
+ * PXA31x A1 0x69056891 0x1E649013
+ * PXA31x A2 0x69056892 0x2E649013
+ * PXA32x B1 0x69056825 0x5E642013
+ * PXA32x B2 0x69056826 0x6E642013
+ *
+ * PXA930 B0 0x69056835 0x5E643013
+ * PXA930 B1 0x69056837 0x7E643013
+ * PXA930 B2 0x69056838 0x8E643013
+ *
+ * PXA935 A0 0x56056931 0x1E653013
+ * PXA935 B0 0x56056936 0x6E653013
+ * PXA935 B1 0x56056938 0x8E653013
+ */
+#ifdef CONFIG_PXA25x
+#define __cpu_is_pxa210(id) \
+ ({ \
+ unsigned int _id = (id) & 0xf3f0; \
+ _id == 0x2120; \
+ })
+
+#define __cpu_is_pxa250(id) \
+ ({ \
+ unsigned int _id = (id) & 0xf3ff; \
+ _id <= 0x2105; \
+ })
+
+#define __cpu_is_pxa255(id) \
+ ({ \
+ unsigned int _id = (id) & 0xffff; \
+ _id == 0x2d06; \
+ })
+
+#define __cpu_is_pxa25x(id) \
+ ({ \
+ unsigned int _id = (id) & 0xf300; \
+ _id == 0x2100; \
+ })
+#else
+#define __cpu_is_pxa210(id) (0)
+#define __cpu_is_pxa250(id) (0)
+#define __cpu_is_pxa255(id) (0)
+#define __cpu_is_pxa25x(id) (0)
+#endif
+
+#ifdef CONFIG_PXA27x
+#define __cpu_is_pxa27x(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x411; \
+ })
+#else
+#define __cpu_is_pxa27x(id) (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA300
+#define __cpu_is_pxa300(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x688; \
+ })
+#else
+#define __cpu_is_pxa300(id) (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA310
+#define __cpu_is_pxa310(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x689; \
+ })
+#else
+#define __cpu_is_pxa310(id) (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+#define __cpu_is_pxa320(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x603 || _id == 0x682; \
+ })
+#else
+#define __cpu_is_pxa320(id) (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define __cpu_is_pxa930(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x683; \
+ })
+#else
+#define __cpu_is_pxa930(id) (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA935
+#define __cpu_is_pxa935(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ _id == 0x693; \
+ })
+#else
+#define __cpu_is_pxa935(id) (0)
+#endif
+
+#define cpu_is_pxa210() \
+ ({ \
+ __cpu_is_pxa210(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa250() \
+ ({ \
+ __cpu_is_pxa250(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa255() \
+ ({ \
+ __cpu_is_pxa255(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa25x() \
+ ({ \
+ __cpu_is_pxa25x(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa27x() \
+ ({ \
+ __cpu_is_pxa27x(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa300() \
+ ({ \
+ __cpu_is_pxa300(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa310() \
+ ({ \
+ __cpu_is_pxa310(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa320() \
+ ({ \
+ __cpu_is_pxa320(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa930() \
+ ({ \
+ __cpu_is_pxa930(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa935() \
+ ({ \
+ __cpu_is_pxa935(read_cpuid_id()); \
+ })
+
+
+
+/*
+ * CPUID Core Generation Bit
+ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
+ */
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+#define __cpu_is_pxa2xx(id) \
+ ({ \
+ unsigned int _id = (id) >> 13 & 0x7; \
+ _id <= 0x2; \
+ })
+#else
+#define __cpu_is_pxa2xx(id) (0)
+#endif
+
+#ifdef CONFIG_PXA3xx
+#define __cpu_is_pxa3xx(id) \
+ ({ \
+ __cpu_is_pxa300(id) \
+ || __cpu_is_pxa310(id) \
+ || __cpu_is_pxa320(id) \
+ || __cpu_is_pxa93x(id); \
+ })
+#else
+#define __cpu_is_pxa3xx(id) (0)
+#endif
+
+#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
+#define __cpu_is_pxa93x(id) \
+ ({ \
+ __cpu_is_pxa930(id) \
+ || __cpu_is_pxa935(id); \
+ })
+#else
+#define __cpu_is_pxa93x(id) (0)
+#endif
+
+#define cpu_is_pxa2xx() \
+ ({ \
+ __cpu_is_pxa2xx(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa3xx() \
+ ({ \
+ __cpu_is_pxa3xx(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa93x() \
+ ({ \
+ __cpu_is_pxa93x(read_cpuid_id()); \
+ })
+
+
+/*
+ * return current memory and LCD clock frequency in units of 10kHz
+ */
+extern unsigned int get_memclk_frequency_10khz(void);
+
+#endif
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
new file mode 100644
index 0000000..0e1bb46
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -0,0 +1,133 @@
+/*
+ * GPIO and IRQ definitions for HP iPAQ hx4700
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _HX4700_H_
+#define _HX4700_H_
+
+#include <linux/gpio.h>
+#include <linux/mfd/asic3.h>
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
+#define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO
+#define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+#define HX4700_NR_IRQS (IRQ_BOARD_START + 70)
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_HX4700_nKEY_POWER 0
+#define GPIO12_HX4700_ASIC3_IRQ 12
+#define GPIO13_HX4700_W3220_IRQ 13
+#define GPIO14_HX4700_nWLAN_IRQ 14
+#define GPIO18_HX4700_RDY 18
+#define GPIO22_HX4700_LCD_RL 22
+#define GPIO27_HX4700_CODEC_ON 27
+#define GPIO32_HX4700_RS232_ON 32
+#define GPIO52_HX4700_CPU_nBATT_FAULT 52
+#define GPIO58_HX4700_TSC2046_nPENIRQ 58
+#define GPIO59_HX4700_LCD_PC1 59
+#define GPIO60_HX4700_CF_RNB 60
+#define GPIO61_HX4700_W3220_nRESET 61
+#define GPIO62_HX4700_LCD_nRESET 62
+#define GPIO63_HX4700_CPU_SS_nRESET 63
+#define GPIO65_HX4700_TSC2046_PEN_PU 65
+#define GPIO66_HX4700_ASIC3_nSDIO_IRQ 66
+#define GPIO67_HX4700_EUART_PS 67
+#define GPIO70_HX4700_LCD_SLIN1 70
+#define GPIO71_HX4700_ASIC3_nRESET 71
+#define GPIO72_HX4700_BQ24022_nCHARGE_EN 72
+#define GPIO73_HX4700_LCD_UD_1 73
+#define GPIO75_HX4700_EARPHONE_nDET 75
+#define GPIO76_HX4700_USBC_PUEN 76
+#define GPIO81_HX4700_CPU_GP_nRESET 81
+#define GPIO82_HX4700_EUART_RESET 82
+#define GPIO83_HX4700_WLAN_nRESET 83
+#define GPIO84_HX4700_LCD_SQN 84
+#define GPIO85_HX4700_nPCE1 85
+#define GPIO88_HX4700_TSC2046_CS 88
+#define GPIO91_HX4700_FLASH_VPEN 91
+#define GPIO92_HX4700_HP_DRIVER 92
+#define GPIO93_HX4700_EUART_INT 93
+#define GPIO94_HX4700_KEY_MAIL 94
+#define GPIO95_HX4700_BATT_OFF 95
+#define GPIO96_HX4700_BQ24022_ISET2 96
+#define GPIO97_HX4700_nBL_DETECT 97
+#define GPIO99_HX4700_KEY_CONTACTS 99
+#define GPIO100_HX4700_AUTO_SENSE 100 /* BL auto brightness */
+#define GPIO102_HX4700_SYNAPTICS_POWER_ON 102
+#define GPIO103_HX4700_SYNAPTICS_INT 103
+#define GPIO105_HX4700_nIR_ON 105
+#define GPIO106_HX4700_CPU_BT_nRESET 106
+#define GPIO107_HX4700_SPK_nSD 107
+#define GPIO109_HX4700_CODEC_nPDN 109
+#define GPIO110_HX4700_LCD_LVDD_3V3_ON 110
+#define GPIO111_HX4700_LCD_AVDD_3V3_ON 111
+#define GPIO112_HX4700_LCD_N2V7_7V3_ON 112
+#define GPIO114_HX4700_CF_RESET 114
+#define GPIO116_HX4700_CPU_HW_nRESET 116
+
+/*
+ * ASIC3 GPIOs
+ */
+
+#define GPIOC_BASE (HX4700_ASIC3_GPIO_BASE + 32)
+#define GPIOD_BASE (HX4700_ASIC3_GPIO_BASE + 48)
+
+#define GPIOC0_LED_RED (GPIOC_BASE + 0)
+#define GPIOC1_LED_GREEN (GPIOC_BASE + 1)
+#define GPIOC2_LED_BLUE (GPIOC_BASE + 2)
+#define GPIOC3_nSD_CS (GPIOC_BASE + 3)
+#define GPIOC4_CF_nCD (GPIOC_BASE + 4) /* Input */
+#define GPIOC5_nCIOW (GPIOC_BASE + 5) /* Output, to CF */
+#define GPIOC6_nCIOR (GPIOC_BASE + 6) /* Output, to CF */
+#define GPIOC7_nPCE1 (GPIOC_BASE + 7) /* Input, from CPU */
+#define GPIOC8_nPCE2 (GPIOC_BASE + 8) /* Input, from CPU */
+#define GPIOC9_nPOE (GPIOC_BASE + 9) /* Input, from CPU */
+#define GPIOC10_CF_nPWE (GPIOC_BASE + 10) /* Input */
+#define GPIOC11_PSKTSEL (GPIOC_BASE + 11) /* Input, from CPU */
+#define GPIOC12_nPREG (GPIOC_BASE + 12) /* Input, from CPU */
+#define GPIOC13_nPWAIT (GPIOC_BASE + 13) /* Output, to CPU */
+#define GPIOC14_nPIOIS16 (GPIOC_BASE + 14) /* Output, to CPU */
+#define GPIOC15_nPIOR (GPIOC_BASE + 15) /* Input, from CPU */
+
+#define GPIOD0_CPU_SS_INT (GPIOD_BASE + 0) /* Input */
+#define GPIOD1_nKEY_CALENDAR (GPIOD_BASE + 1)
+#define GPIOD2_BLUETOOTH_WAKEUP (GPIOD_BASE + 2)
+#define GPIOD3_nKEY_HOME (GPIOD_BASE + 3)
+#define GPIOD4_CF_nCD (GPIOD_BASE + 4) /* Input, from CF */
+#define GPIOD5_nPIO (GPIOD_BASE + 5) /* Input */
+#define GPIOD6_nKEY_RECORD (GPIOD_BASE + 6)
+#define GPIOD7_nSDIO_DETECT (GPIOD_BASE + 7)
+#define GPIOD8_COM_DCD (GPIOD_BASE + 8) /* Input */
+#define GPIOD9_nAC_IN (GPIOD_BASE + 9)
+#define GPIOD10_nSDIO_IRQ (GPIOD_BASE + 10) /* Input */
+#define GPIOD11_nCIOIS16 (GPIOD_BASE + 11) /* Input, from CF */
+#define GPIOD12_nCWAIT (GPIOD_BASE + 12) /* Input, from CF */
+#define GPIOD13_CF_RNB (GPIOD_BASE + 13) /* Input */
+#define GPIOD14_nUSBC_DETECT (GPIOD_BASE + 14)
+#define GPIOD15_nPIOW (GPIOD_BASE + 15) /* Input, from CPU */
+
+/*
+ * EGPIOs
+ */
+
+#define EGPIO0_VCC_3V3_EN (HX4700_EGPIO_BASE + 0) /* WLAN support chip */
+#define EGPIO1_WL_VREG_EN (HX4700_EGPIO_BASE + 1) /* WLAN power */
+#define EGPIO2_VCC_2V1_WL_EN (HX4700_EGPIO_BASE + 2) /* unused */
+#define EGPIO3_SS_PWR_ON (HX4700_EGPIO_BASE + 3) /* smart slot power */
+#define EGPIO4_CF_3V3_ON (HX4700_EGPIO_BASE + 4) /* CF 3.3V enable */
+#define EGPIO5_BT_3V3_ON (HX4700_EGPIO_BASE + 5) /* BT 3.3V enable */
+#define EGPIO6_WL1V8_EN (HX4700_EGPIO_BASE + 6) /* WLAN 1.8V enable */
+#define EGPIO7_VCC_3V3_WL_EN (HX4700_EGPIO_BASE + 7) /* WLAN 3.3V enable */
+#define EGPIO8_USB_3V3_ON (HX4700_EGPIO_BASE + 8) /* unused */
+
+#endif /* _HX4700_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
new file mode 100644
index 0000000..d54031c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-pxa/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
new file mode 100644
index 0000000..7e3ea35
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -0,0 +1,112 @@
+/*
+ * arch/arm/mach-pxa/include/mach/irqs.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+#include <asm/irq.h>
+
+#define PXA_ISA_IRQ(x) (x)
+#define PXA_IRQ(x) (NR_IRQS_LEGACY + (x))
+
+#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */
+#define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */
+#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI,PXA27x) */
+#define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI,PXA27x) */
+#define IRQ_KEYPAD PXA_IRQ(4) /* Key pad controller */
+#define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt (PXA27x) */
+#define IRQ_ACIPC0 PXA_IRQ(5) /* AP-CP Communication (PXA930) */
+#define IRQ_PWRI2C PXA_IRQ(6) /* Power I2C interrupt */
+#define IRQ_HWUART PXA_IRQ(7) /* HWUART Transmit/Receive/Error (PXA26x) */
+#define IRQ_OST_4_11 PXA_IRQ(7) /* OS timer 4-11 matches (PXA27x) */
+#define IRQ_GPIO0 PXA_IRQ(8) /* GPIO0 Edge Detect */
+#define IRQ_GPIO1 PXA_IRQ(9) /* GPIO1 Edge Detect */
+#define IRQ_GPIO_2_x PXA_IRQ(10) /* GPIO[2-x] Edge Detect */
+#define IRQ_USB PXA_IRQ(11) /* USB Service */
+#define IRQ_PMU PXA_IRQ(12) /* Performance Monitoring Unit */
+#define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt (PXA27x) */
+#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request (PXA3xx) */
+#define IRQ_AC97 PXA_IRQ(14) /* AC97 Interrupt */
+#define IRQ_ASSP PXA_IRQ(15) /* Audio SSP Service Request (PXA25x) */
+#define IRQ_USIM PXA_IRQ(15) /* Smart Card interface interrupt (PXA27x) */
+#define IRQ_NSSP PXA_IRQ(16) /* Network SSP Service Request (PXA25x) */
+#define IRQ_SSP2 PXA_IRQ(16) /* SSP2 interrupt (PXA27x) */
+#define IRQ_LCD PXA_IRQ(17) /* LCD Controller Service Request */
+#define IRQ_I2C PXA_IRQ(18) /* I2C Service Request */
+#define IRQ_ICP PXA_IRQ(19) /* ICP Transmit/Receive/Error */
+#define IRQ_ACIPC2 PXA_IRQ(19) /* AP-CP Communication (PXA930) */
+#define IRQ_STUART PXA_IRQ(20) /* STUART Transmit/Receive/Error */
+#define IRQ_BTUART PXA_IRQ(21) /* BTUART Transmit/Receive/Error */
+#define IRQ_FFUART PXA_IRQ(22) /* FFUART Transmit/Receive/Error*/
+#define IRQ_MMC PXA_IRQ(23) /* MMC Status/Error Detection */
+#define IRQ_SSP PXA_IRQ(24) /* SSP Service Request */
+#define IRQ_DMA PXA_IRQ(25) /* DMA Channel Service Request */
+#define IRQ_OST0 PXA_IRQ(26) /* OS Timer match 0 */
+#define IRQ_OST1 PXA_IRQ(27) /* OS Timer match 1 */
+#define IRQ_OST2 PXA_IRQ(28) /* OS Timer match 2 */
+#define IRQ_OST3 PXA_IRQ(29) /* OS Timer match 3 */
+#define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */
+#define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */
+
+#define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */
+#define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */
+#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */
+#define IRQ_COMM_WDT PXA_IRQ(35) /* Comm WDT interrupt */
+#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */
+#define IRQ_ENHROT PXA_IRQ(37) /* Enhanced Rotary (PXA930) */
+#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */
+#define IRQ_GCU PXA_IRQ(39) /* Graphics Controller (PXA3xx) */
+#define IRQ_ACIPC1 PXA_IRQ(40) /* AP-CP Communication (PXA930) */
+#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */
+#define IRQ_TRKBALL PXA_IRQ(43) /* Track Ball (PXA930) */
+#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */
+#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */
+#define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */
+#define IRQ_WAKEUP0 PXA_IRQ(49) /* EXT_WAKEUP0 */
+#define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */
+#define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */
+#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
+
+#define IRQ_U2O PXA_IRQ(64) /* USB OTG 2.0 Controller (PXA935) */
+#define IRQ_U2H PXA_IRQ(65) /* USB Host 2.0 Controller (PXA935) */
+#define IRQ_PXA935_MMC0 PXA_IRQ(72) /* MMC0 Controller (PXA935) */
+#define IRQ_PXA935_MMC1 PXA_IRQ(73) /* MMC1 Controller (PXA935) */
+#define IRQ_PXA935_MMC2 PXA_IRQ(74) /* MMC2 Controller (PXA935) */
+#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
+
+#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
+#define PXA_NR_BUILTIN_GPIO (192)
+#define PXA_GPIO_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
+
+/*
+ * The following interrupts are for board specific purposes. Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.
+ * By default, no board IRQ is reserved. It should be finished in
+ * custom board since sparse IRQ is already enabled.
+ */
+#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO)
+
+#define PXA_NR_IRQS (IRQ_BOARD_START)
+
+#ifndef __ASSEMBLY__
+struct irq_data;
+struct pt_regs;
+
+void pxa_mask_irq(struct irq_data *);
+void pxa_unmask_irq(struct irq_data *);
+void icip_handle_irq(struct pt_regs *);
+void ichp_handle_irq(struct pt_regs *);
+
+void pxa_init_irq(int irq_nr, int (*set_wake)(struct irq_data *, unsigned int));
+#endif
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
new file mode 100644
index 0000000..1eecf79
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-pxa/include/mach/lubbock.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/irqs.h>
+
+#define LUBBOCK_ETH_PHYS PXA_CS3_PHYS
+
+#define LUBBOCK_FPGA_PHYS PXA_CS2_PHYS
+#define LUBBOCK_FPGA_VIRT (0xf0000000)
+#define LUB_P2V(x) ((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
+#define LUB_V2P(x) ((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __LUB_REG(x) (*((volatile unsigned long *)LUB_P2V(x)))
+#else
+# define __LUB_REG(x) LUB_P2V(x)
+#endif
+
+/* FPGA register virtual addresses */
+#define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
+#define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
+#define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
+#define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
+#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+#define LUB_MISC_RD __LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
+#define LUB_IRQ_MASK_EN __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
+#define LUB_IRQ_SET_CLR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
+#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
+
+/* Board specific IRQs */
+#define LUBBOCK_NR_IRQS IRQ_BOARD_START
+
+#define LUBBOCK_IRQ(x) (LUBBOCK_NR_IRQS + (x))
+#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
+#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
+#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
+
+#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32)
+
+#ifndef __ASSEMBLY__
+extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
new file mode 100644
index 0000000..c48b54d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -0,0 +1,129 @@
+/*
+ * GPIO and IRQ definitions for HTC Magician PDA phones
+ *
+ * Copyright (c) 2007 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MAGICIAN_H_
+#define _MAGICIAN_H_
+
+#include <linux/gpio.h>
+#include <mach/irqs.h>
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_MAGICIAN_KEY_POWER 0
+#define GPIO9_MAGICIAN_UNKNOWN 9
+#define GPIO10_MAGICIAN_GSM_IRQ 10
+#define GPIO11_MAGICIAN_GSM_OUT1 11
+#define GPIO13_MAGICIAN_CPLD_IRQ 13
+#define GPIO14_MAGICIAN_TSC2046_CS 14
+#define GPIO18_MAGICIAN_UNKNOWN 18
+#define GPIO22_MAGICIAN_VIBRA_EN 22
+#define GPIO26_MAGICIAN_GSM_POWER 26
+#define GPIO27_MAGICIAN_USBC_PUEN 27
+#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30
+#define GPIO37_MAGICIAN_KEY_HANGUP 37
+#define GPIO38_MAGICIAN_KEY_CONTACTS 38
+#define GPIO40_MAGICIAN_GSM_OUT2 40
+#define GPIO48_MAGICIAN_UNKNOWN 48
+#define GPIO56_MAGICIAN_UNKNOWN 56
+#define GPIO57_MAGICIAN_CAM_RESET 57
+#define GPIO75_MAGICIAN_SAMSUNG_POWER 75
+#define GPIO83_MAGICIAN_nIR_EN 83
+#define GPIO86_MAGICIAN_GSM_RESET 86
+#define GPIO87_MAGICIAN_GSM_SELECT 87
+#define GPIO90_MAGICIAN_KEY_CALENDAR 90
+#define GPIO91_MAGICIAN_KEY_CAMERA 91
+#define GPIO93_MAGICIAN_KEY_UP 93
+#define GPIO94_MAGICIAN_KEY_DOWN 94
+#define GPIO95_MAGICIAN_KEY_LEFT 95
+#define GPIO96_MAGICIAN_KEY_RIGHT 96
+#define GPIO97_MAGICIAN_KEY_ENTER 97
+#define GPIO98_MAGICIAN_KEY_RECORD 98
+#define GPIO99_MAGICIAN_HEADPHONE_IN 99
+#define GPIO100_MAGICIAN_KEY_VOL_UP 100
+#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101
+#define GPIO102_MAGICIAN_KEY_PHONE 102
+#define GPIO103_MAGICIAN_LED_KP 103
+#define GPIO104_MAGICIAN_LCD_VOFF_EN 104
+#define GPIO105_MAGICIAN_LCD_VON_EN 105
+#define GPIO106_MAGICIAN_LCD_DCDC_NRESET 106
+#define GPIO107_MAGICIAN_DS1WM_IRQ 107
+#define GPIO108_MAGICIAN_GSM_READY 108
+#define GPIO114_MAGICIAN_UNKNOWN 114
+#define GPIO115_MAGICIAN_nPEN_IRQ 115
+#define GPIO116_MAGICIAN_nCAM_EN 116
+#define GPIO119_MAGICIAN_UNKNOWN 119
+#define GPIO120_MAGICIAN_UNKNOWN 120
+
+/*
+ * CPLD IRQs
+ */
+
+#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0)
+#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1)
+#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2)
+#define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3)
+
+#define MAGICIAN_NR_IRQS (IRQ_BOARD_START + 8)
+
+/*
+ * CPLD EGPIOs
+ */
+
+#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO
+#define MAGICIAN_EGPIO(reg,bit) \
+ (MAGICIAN_EGPIO_BASE + 8*reg + bit)
+
+/* output */
+
+#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_NICD_CHARGE MAGICIAN_EGPIO(2, 6)
+#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
+
+/* input */
+
+/* USB or AC charger type */
+#define EGPIO_MAGICIAN_CABLE_TYPE MAGICIAN_EGPIO(4, 0)
+/*
+ * Vbus is detected
+ * FIXME behaves like (6,3), may differ for host/device
+ */
+#define EGPIO_MAGICIAN_CABLE_VBUS MAGICIAN_EGPIO(4, 1)
+
+#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4)
+
+#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1)
+/* FIXME behaves like (4,1), may differ for host/device */
+#define EGPIO_MAGICIAN_CABLE_INSERTED MAGICIAN_EGPIO(6, 3)
+
+#endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
new file mode 100644
index 0000000..e82a7d3
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -0,0 +1,141 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mainstone.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 14, 2002
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_MAINSTONE_H
+#define ASM_ARCH_MAINSTONE_H
+
+#include <mach/irqs.h>
+
+#define MST_ETH_PHYS PXA_CS4_PHYS
+
+#define MST_FPGA_PHYS PXA_CS2_PHYS
+#define MST_FPGA_VIRT (0xf0000000)
+#define MST_P2V(x) ((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
+#define MST_V2P(x) ((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __MST_REG(x) (*((volatile unsigned long *)MST_P2V(x)))
+#else
+# define __MST_REG(x) MST_P2V(x)
+#endif
+
+/* board level registers in the FPGA */
+
+#define MST_LEDDAT1 __MST_REG(0x08000010)
+#define MST_LEDDAT2 __MST_REG(0x08000014)
+#define MST_LEDCTRL __MST_REG(0x08000040)
+#define MST_GPSWR __MST_REG(0x08000060)
+#define MST_MSCWR1 __MST_REG(0x08000080)
+#define MST_MSCWR2 __MST_REG(0x08000084)
+#define MST_MSCWR3 __MST_REG(0x08000088)
+#define MST_MSCRD __MST_REG(0x08000090)
+#define MST_INTMSKENA __MST_REG(0x080000c0)
+#define MST_INTSETCLR __MST_REG(0x080000d0)
+#define MST_PCMCIA0 __MST_REG(0x080000e0)
+#define MST_PCMCIA1 __MST_REG(0x080000e4)
+
+#define MST_MSCWR1_CAMERA_ON (1 << 15) /* Camera interface power control */
+#define MST_MSCWR1_CAMERA_SEL (1 << 14) /* Camera interface mux control */
+#define MST_MSCWR1_LCD_CTL (1 << 13) /* General-purpose LCD control */
+#define MST_MSCWR1_MS_ON (1 << 12) /* Memory Stick power control */
+#define MST_MSCWR1_MMC_ON (1 << 11) /* MultiMediaCard* power control */
+#define MST_MSCWR1_MS_SEL (1 << 10) /* SD/MS multiplexer control */
+#define MST_MSCWR1_BB_SEL (1 << 9) /* PCMCIA/Baseband multiplexer */
+#define MST_MSCWR1_BT_ON (1 << 8) /* Bluetooth UART transceiver */
+#define MST_MSCWR1_BTDTR (1 << 7) /* Bluetooth UART DTR */
+
+#define MST_MSCWR1_IRDA_MASK (3 << 5) /* IrDA transceiver mode */
+#define MST_MSCWR1_IRDA_FULL (0 << 5) /* full distance power */
+#define MST_MSCWR1_IRDA_OFF (1 << 5) /* shutdown */
+#define MST_MSCWR1_IRDA_MED (2 << 5) /* 2/3 distance power */
+#define MST_MSCWR1_IRDA_LOW (3 << 5) /* 1/3 distance power */
+
+#define MST_MSCWR1_IRDA_FIR (1 << 4) /* IrDA transceiver SIR/FIR */
+#define MST_MSCWR1_GREENLED (1 << 3) /* LED D1 control */
+#define MST_MSCWR1_PDC_CTL (1 << 2) /* reserved */
+#define MST_MSCWR1_MTR_ON (1 << 1) /* Silent alert motor */
+#define MST_MSCWR1_SYSRESET (1 << 0) /* System reset */
+
+#define MST_MSCWR2_USB_OTG_RST (1 << 6) /* USB On The Go reset */
+#define MST_MSCWR2_USB_OTG_SEL (1 << 5) /* USB On The Go control */
+#define MST_MSCWR2_nUSBC_SC (1 << 4) /* USB client soft connect control */
+#define MST_MSCWR2_I2S_SPKROFF (1 << 3) /* I2S CODEC amplifier control */
+#define MST_MSCWR2_AC97_SPKROFF (1 << 2) /* AC97 CODEC amplifier control */
+#define MST_MSCWR2_RADIO_PWR (1 << 1) /* Radio module power control */
+#define MST_MSCWR2_RADIO_WAKE (1 << 0) /* Radio module wake-up signal */
+
+#define MST_MSCWR3_GPIO_RESET_EN (1 << 2) /* Enable GPIO Reset */
+#define MST_MSCWR3_GPIO_RESET (1 << 1) /* Initiate a GPIO Reset */
+#define MST_MSCWR3_COMMS_SW_RESET (1 << 0) /* Communications Processor Reset Control */
+
+#define MST_MSCRD_nPENIRQ (1 << 9) /* ADI7873* nPENIRQ signal */
+#define MST_MSCRD_nMEMSTK_CD (1 << 8) /* Memory Stick detection signal */
+#define MST_MSCRD_nMMC_CD (1 << 7) /* SD/MMC card detection signal */
+#define MST_MSCRD_nUSIM_CD (1 << 6) /* USIM card detection signal */
+#define MST_MSCRD_USB_CBL (1 << 5) /* USB client cable status */
+#define MST_MSCRD_TS_BUSY (1 << 4) /* ADI7873 busy */
+#define MST_MSCRD_BTDSR (1 << 3) /* Bluetooth UART DSR */
+#define MST_MSCRD_BTRI (1 << 2) /* Bluetooth UART Ring Indicator */
+#define MST_MSCRD_BTDCD (1 << 1) /* Bluetooth UART DCD */
+#define MST_MSCRD_nMMC_WP (1 << 0) /* SD/MMC write-protect status */
+
+#define MST_INT_S1_IRQ (1 << 15) /* PCMCIA socket 1 IRQ */
+#define MST_INT_S1_STSCHG (1 << 14) /* PCMCIA socket 1 status changed */
+#define MST_INT_S1_CD (1 << 13) /* PCMCIA socket 1 card detection */
+#define MST_INT_S0_IRQ (1 << 11) /* PCMCIA socket 0 IRQ */
+#define MST_INT_S0_STSCHG (1 << 10) /* PCMCIA socket 0 status changed */
+#define MST_INT_S0_CD (1 << 9) /* PCMCIA socket 0 card detection */
+#define MST_INT_nEXBRD_INT (1 << 7) /* Expansion board IRQ */
+#define MST_INT_MSINS (1 << 6) /* Memory Stick* detection */
+#define MST_INT_PENIRQ (1 << 5) /* ADI7873* touch-screen IRQ */
+#define MST_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */
+#define MST_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */
+#define MST_INT_USBC (1 << 2) /* USB client cable detection IRQ */
+#define MST_INT_USIM (1 << 1) /* USIM card detection IRQ */
+#define MST_INT_MMC (1 << 0) /* MMC/SD card detection IRQ */
+
+#define MST_PCMCIA_nIRQ (1 << 10) /* IRQ / ready signal */
+#define MST_PCMCIA_nSPKR_BVD2 (1 << 9) /* VDD sense / digital speaker */
+#define MST_PCMCIA_nSTSCHG_BVD1 (1 << 8) /* VDD sense / card status changed */
+#define MST_PCMCIA_nVS2 (1 << 7) /* VSS voltage sense */
+#define MST_PCMCIA_nVS1 (1 << 6) /* VSS voltage sense */
+#define MST_PCMCIA_nCD (1 << 5) /* Card detection signal */
+#define MST_PCMCIA_RESET (1 << 4) /* Card reset signal */
+#define MST_PCMCIA_PWR_MASK (0x000f) /* MAX1602 power-supply controls */
+
+#define MST_PCMCIA_PWR_VPP_0 0x0 /* voltage VPP = 0V */
+#define MST_PCMCIA_PWR_VPP_120 0x2 /* voltage VPP = 12V*/
+#define MST_PCMCIA_PWR_VPP_VCC 0x1 /* voltage VPP = VCC */
+#define MST_PCMCIA_PWR_VCC_0 0x0 /* voltage VCC = 0V */
+#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */
+#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
+
+/* board specific IRQs */
+#define MAINSTONE_NR_IRQS IRQ_BOARD_START
+
+#define MAINSTONE_IRQ(x) (MAINSTONE_NR_IRQS + (x))
+#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
new file mode 100644
index 0000000..271e249
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp.h
+ *
+ * Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+#include <plat/mfp.h>
+
+#endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
new file mode 100644
index 0000000..9bf4ea6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -0,0 +1,39 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 2, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_PXA_MTD_XIP_H__
+#define __ARCH_PXA_MTD_XIP_H__
+
+#include <mach/regs-ost.h>
+
+/* restored July 2017, this did not build since 2011! */
+
+#define ICIP io_p2v(0x40d00000)
+#define ICMR io_p2v(0x40d00004)
+#define xip_irqpending() (readl(ICIP) & readl(ICMR))
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime() readl(OSCR)
+#define xip_elapsed_since(x) (signed)((readl(OSCR) - (x)) / 4)
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period. This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
+
+#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
new file mode 100644
index 0000000..b184f29
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -0,0 +1,111 @@
+/*
+ * GPIOs and interrupts for Palm LifeDrive Handheld Computer
+ *
+ * Authors: Alex Osborne <ato@meshy.org>
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMLD_H_
+#define _INCLUDE_PALMLD_H_
+
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMLD_GPIO_RESET 1
+#define GPIO_NR_PALMLD_POWER_DETECT 4
+#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N 10
+#define GPIO_NR_PALMLD_POWER_SWITCH 12
+#define GPIO_NR_PALMLD_EARPHONE_DETECT 13
+#define GPIO_NR_PALMLD_LOCK_SWITCH 15
+
+/* SD/MMC */
+#define GPIO_NR_PALMLD_SD_DETECT_N 14
+#define GPIO_NR_PALMLD_SD_POWER 114
+#define GPIO_NR_PALMLD_SD_READONLY 116
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMLD_WM9712_IRQ 27
+
+/* IRDA */
+#define GPIO_NR_PALMLD_IR_DISABLE 108
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMLD_BL_POWER 19
+#define GPIO_NR_PALMLD_LCD_POWER 96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMLD_BORDER_SWITCH 21
+#define GPIO_NR_PALMLD_BORDER_SELECT 22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMLD_BT_POWER 17
+#define GPIO_NR_PALMLD_BT_RESET 83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMLD_PCMCIA_READY 38
+#define GPIO_NR_PALMLD_PCMCIA_POWER 36
+#define GPIO_NR_PALMLD_PCMCIA_RESET 81
+
+/* LEDs */
+#define GPIO_NR_PALMLD_LED_GREEN 52
+#define GPIO_NR_PALMLD_LED_AMBER 94
+
+/* IDE */
+#define GPIO_NR_PALMLD_IDE_RESET 98
+#define GPIO_NR_PALMLD_IDE_PWEN 115
+
+/* USB */
+#define GPIO_NR_PALMLD_USB_DETECT_N 3
+#define GPIO_NR_PALMLD_USB_READY 86
+#define GPIO_NR_PALMLD_USB_RESET 88
+#define GPIO_NR_PALMLD_USB_INT 106
+#define GPIO_NR_PALMLD_USB_POWER 118
+/* 20, 53 and 86 are usb related too */
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMLD_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET)
+#define IRQ_GPIO_PALMLD_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N)
+#define IRQ_GPIO_PALMLD_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ)
+#define IRQ_GPIO_PALMLD_IDE_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ)
+
+
+/** HERE ARE INIT VALUES **/
+
+/* IO mappings */
+#define PALMLD_USB_PHYS PXA_CS2_PHYS
+#define PALMLD_USB_VIRT 0xf0000000
+#define PALMLD_USB_SIZE 0x00100000
+
+#define PALMLD_IDE_PHYS 0x20000000
+#define PALMLD_IDE_VIRT 0xf1000000
+#define PALMLD_IDE_SIZE 0x00100000
+
+#define PALMLD_PHYS_IO_START 0x40000000
+#define PALMLD_STR_BASE 0xa0200000
+
+/* BATTERY */
+#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
+#define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
+#define PALMLD_BAT_MAX_CURRENT 0 /* unknown */
+#define PALMLD_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMLD_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMLD_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMLD_MAX_LIFE_MINS 240 /* on-life in minutes */
+
+#define PALMLD_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMLD_MAX_INTENSITY 0xFE
+#define PALMLD_DEFAULT_INTENSITY 0x7E
+#define PALMLD_LIMIT_MASK 0x7F
+#define PALMLD_PRESCALER 0x3F
+#define PALMLD_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
new file mode 100644
index 0000000..81c727b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -0,0 +1,88 @@
+/*
+ * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
+ *
+ * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
+ *
+ * Authors: Alex Osborne <bobofdoom@gmail.com>
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Holger Bocklet <bitz.email@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTC_H_
+#define _INCLUDE_PALMTC_H_
+
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTC_EARPHONE_DETECT 2
+#define GPIO_NR_PALMTC_CRADLE_DETECT 5
+#define GPIO_NR_PALMTC_HOTSYNC_BUTTON 7
+
+/* SD/MMC */
+#define GPIO_NR_PALMTC_SD_DETECT_N 12
+#define GPIO_NR_PALMTC_SD_POWER 32
+#define GPIO_NR_PALMTC_SD_READONLY 54
+
+/* WLAN */
+#define GPIO_NR_PALMTC_PCMCIA_READY 13
+#define GPIO_NR_PALMTC_PCMCIA_PWRREADY 14
+#define GPIO_NR_PALMTC_PCMCIA_POWER1 15
+#define GPIO_NR_PALMTC_PCMCIA_POWER2 33
+#define GPIO_NR_PALMTC_PCMCIA_POWER3 55
+#define GPIO_NR_PALMTC_PCMCIA_RESET 78
+
+/* UDC */
+#define GPIO_NR_PALMTC_USB_DETECT_N 4
+#define GPIO_NR_PALMTC_USB_POWER 36
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTC_BL_POWER 16
+#define GPIO_NR_PALMTC_LCD_POWER 44
+#define GPIO_NR_PALMTC_LCD_BLANK 38
+
+/* UART */
+#define GPIO_NR_PALMTC_RS232_POWER 37
+
+/* IRDA */
+#define GPIO_NR_PALMTC_IR_DISABLE 45
+
+/* IRQs */
+#define IRQ_GPIO_PALMTC_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N)
+#define IRQ_GPIO_PALMTC_WLAN_READY PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY)
+
+/* UCB1400 GPIOs */
+#define GPIO_NR_PALMTC_POWER_DETECT (0x80 | 0x00)
+#define GPIO_NR_PALMTC_HEADPHONE_DETECT (0x80 | 0x01)
+#define GPIO_NR_PALMTC_SPEAKER_ENABLE (0x80 | 0x03)
+#define GPIO_NR_PALMTC_VIBRA_POWER (0x80 | 0x05)
+#define GPIO_NR_PALMTC_LED_POWER (0x80 | 0x07)
+
+/** HERE ARE INIT VALUES **/
+#define PALMTC_UCB1400_GPIO_OFFSET 0x80
+
+/* BATTERY */
+#define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
+#define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
+#define PALMTC_BAT_MAX_CURRENT 0 /* unknown */
+#define PALMTC_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMTC_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMTC_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMTC_MAX_LIFE_MINS 240 /* on-life in minutes */
+
+#define PALMTC_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTC_MAX_INTENSITY 0xFE
+#define PALMTC_DEFAULT_INTENSITY 0x7E
+#define PALMTC_LIMIT_MASK 0x7F
+#define PALMTC_PRESCALER 0x3F
+#define PALMTC_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
new file mode 100644
index 0000000..92bc1f0
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -0,0 +1,114 @@
+/*
+ * GPIOs and interrupts for Palm T|X Handheld Computer
+ *
+ * Based on palmld-gpio.h by Alex Osborne
+ *
+ * Authors: Marek Vasut <marek.vasut@gmail.com>
+ * Cristiano P. <cristianop@users.sourceforge.net>
+ * Jan Herman <2hp@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTX_H_
+#define _INCLUDE_PALMTX_H_
+
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTX_GPIO_RESET 1
+
+#define GPIO_NR_PALMTX_POWER_DETECT 12 /* 90 */
+#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N 10
+#define GPIO_NR_PALMTX_EARPHONE_DETECT 107
+
+/* SD/MMC */
+#define GPIO_NR_PALMTX_SD_DETECT_N 14
+#define GPIO_NR_PALMTX_SD_POWER 114 /* probably */
+#define GPIO_NR_PALMTX_SD_READONLY 115 /* probably */
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMTX_WM9712_IRQ 27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMTX_IR_DISABLE 40
+
+/* USB */
+#define GPIO_NR_PALMTX_USB_DETECT_N 13
+#define GPIO_NR_PALMTX_USB_PULLUP 93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTX_BL_POWER 84
+#define GPIO_NR_PALMTX_LCD_POWER 96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMTX_BORDER_SWITCH 98
+#define GPIO_NR_PALMTX_BORDER_SELECT 22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMTX_BT_POWER 17
+#define GPIO_NR_PALMTX_BT_RESET 83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMTX_PCMCIA_POWER1 94
+#define GPIO_NR_PALMTX_PCMCIA_POWER2 108
+#define GPIO_NR_PALMTX_PCMCIA_RESET 79
+#define GPIO_NR_PALMTX_PCMCIA_READY 116
+
+/* NAND Flash ... this GPIO may be incorrect! */
+#define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMTX_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N)
+#define IRQ_GPIO_PALMTX_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ)
+#define IRQ_GPIO_PALMTX_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT)
+#define IRQ_GPIO_PALMTX_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses */
+#define PALMTX_PCMCIA_PHYS 0x28000000
+#define PALMTX_PCMCIA_VIRT IOMEM(0xf0000000)
+#define PALMTX_PCMCIA_SIZE 0x100000
+
+#define PALMTX_PHYS_RAM_START 0xa0000000
+#define PALMTX_PHYS_IO_START 0x40000000
+
+#define PALMTX_STR_BASE 0xa0200000
+
+#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */
+#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */
+
+#define PALMTX_NAND_ALE_PHYS (PALMTX_PHYS_NAND_START | (1 << 24))
+#define PALMTX_NAND_CLE_PHYS (PALMTX_PHYS_NAND_START | (1 << 25))
+#define PALMTX_NAND_ALE_VIRT IOMEM(0xff100000)
+#define PALMTX_NAND_CLE_VIRT IOMEM(0xff200000)
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME 21
+
+
+/* BATTERY */
+#define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMTX_BAT_MAX_CURRENT 0 /* unknown */
+#define PALMTX_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMTX_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMTX_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMTX_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+#define PALMTX_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTX_MAX_INTENSITY 0xFE
+#define PALMTX_DEFAULT_INTENSITY 0x7E
+#define PALMTX_LIMIT_MASK 0x7F
+#define PALMTX_PRESCALER 0x3F
+#define PALMTX_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
new file mode 100644
index 0000000..b56b193
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -0,0 +1,94 @@
+/*
+ * arch/arm/mach-pxa/include/mach/poodle.h
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Based on:
+ * arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * ChangeLog:
+ * 04-06-2001 Lineo Japan, Inc.
+ * 04-16-2001 SHARP Corporation
+ * Update to 2.6 John Lenz
+ */
+#ifndef __ASM_ARCH_POODLE_H
+#define __ASM_ARCH_POODLE_H 1
+
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
+/*
+ * GPIOs
+ */
+/* PXA GPIOs */
+#define POODLE_GPIO_ON_KEY (0)
+#define POODLE_GPIO_AC_IN (1)
+#define POODLE_GPIO_CO 16
+#define POODLE_GPIO_TP_INT (5)
+#define POODLE_GPIO_TP_CS (24)
+#define POODLE_GPIO_WAKEUP (11) /* change battery */
+#define POODLE_GPIO_GA_INT (10)
+#define POODLE_GPIO_IR_ON (22)
+#define POODLE_GPIO_HP_IN (4)
+#define POODLE_GPIO_CF_IRQ (17)
+#define POODLE_GPIO_CF_CD (14)
+#define POODLE_GPIO_CF_STSCHG (14)
+#define POODLE_GPIO_SD_PWR (33)
+#define POODLE_GPIO_SD_PWR1 (3)
+#define POODLE_GPIO_nSD_CLK (6)
+#define POODLE_GPIO_nSD_WP (7)
+#define POODLE_GPIO_nSD_INT (8)
+#define POODLE_GPIO_nSD_DETECT (9)
+#define POODLE_GPIO_MAIN_BAT_LOW (13)
+#define POODLE_GPIO_BAT_COVER (13)
+#define POODLE_GPIO_USB_PULLUP (20)
+#define POODLE_GPIO_ADC_TEMP_ON (21)
+#define POODLE_GPIO_BYPASS_ON (36)
+#define POODLE_GPIO_CHRG_ON (38)
+#define POODLE_GPIO_CHRG_FULL (16)
+#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */
+
+/* PXA GPIOs */
+#define POODLE_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(0)
+#define POODLE_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1)
+#define POODLE_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(4)
+#define POODLE_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(16)
+#define POODLE_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5)
+#define POODLE_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(11)
+#define POODLE_IRQ_GPIO_GA_INT PXA_GPIO_TO_IRQ(10)
+#define POODLE_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17)
+#define POODLE_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14)
+#define POODLE_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(13)
+
+/* SCOOP GPIOs */
+#define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11
+#define POODLE_SCOOP_CP401 SCOOP_GPCR_PA13
+#define POODLE_SCOOP_VPEN SCOOP_GPCR_PA18
+#define POODLE_SCOOP_L_PCLK SCOOP_GPCR_PA20
+#define POODLE_SCOOP_L_LCLK SCOOP_GPCR_PA21
+#define POODLE_SCOOP_HS_OUT SCOOP_GPCR_PA22
+
+#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
+#define POODLE_SCOOP_IO_OUT ( 0 )
+
+#define POODLE_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
+#define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0)
+#define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2)
+#define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7)
+#define POODLE_GPIO_L_PCLK (POODLE_SCOOP_GPIO_BASE + 9)
+#define POODLE_GPIO_L_LCLK (POODLE_SCOOP_GPIO_BASE + 10)
+#define POODLE_GPIO_HS_OUT (POODLE_SCOOP_GPIO_BASE + 11)
+
+#define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8)
+#define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10)
+#define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11)
+#define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12)
+#define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13)
+
+#define POODLE_NR_IRQS (IRQ_BOARD_START + 4) /* 4 for LoCoMo */
+
+extern struct platform_device poodle_locomo_device;
+
+#endif /* __ASM_ARCH_POODLE_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
new file mode 100644
index 0000000..5537d56
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ *
+ * Taken from pxa-regs.h by Russell King
+ *
+ * Author: Nicolas Pitre
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA2XX_REGS_H
+#define __PXA2XX_REGS_H
+
+#include <mach/hardware.h>
+
+/*
+ * Power Manager
+ */
+
+#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
+#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
+#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
+#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
+#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
+#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
+
+#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
+#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */
+#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */
+#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */
+#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
+#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
+#define PCMD(x) __REG2(0x40F00080, (x)<<2)
+#define PCMD0 __REG(0x40F00080 + 0 * 4)
+#define PCMD1 __REG(0x40F00080 + 1 * 4)
+#define PCMD2 __REG(0x40F00080 + 2 * 4)
+#define PCMD3 __REG(0x40F00080 + 3 * 4)
+#define PCMD4 __REG(0x40F00080 + 4 * 4)
+#define PCMD5 __REG(0x40F00080 + 5 * 4)
+#define PCMD6 __REG(0x40F00080 + 6 * 4)
+#define PCMD7 __REG(0x40F00080 + 7 * 4)
+#define PCMD8 __REG(0x40F00080 + 8 * 4)
+#define PCMD9 __REG(0x40F00080 + 9 * 4)
+#define PCMD10 __REG(0x40F00080 + 10 * 4)
+#define PCMD11 __REG(0x40F00080 + 11 * 4)
+#define PCMD12 __REG(0x40F00080 + 12 * 4)
+#define PCMD13 __REG(0x40F00080 + 13 * 4)
+#define PCMD14 __REG(0x40F00080 + 14 * 4)
+#define PCMD15 __REG(0x40F00080 + 15 * 4)
+#define PCMD16 __REG(0x40F00080 + 16 * 4)
+#define PCMD17 __REG(0x40F00080 + 17 * 4)
+#define PCMD18 __REG(0x40F00080 + 18 * 4)
+#define PCMD19 __REG(0x40F00080 + 19 * 4)
+#define PCMD20 __REG(0x40F00080 + 20 * 4)
+#define PCMD21 __REG(0x40F00080 + 21 * 4)
+#define PCMD22 __REG(0x40F00080 + 22 * 4)
+#define PCMD23 __REG(0x40F00080 + 23 * 4)
+#define PCMD24 __REG(0x40F00080 + 24 * 4)
+#define PCMD25 __REG(0x40F00080 + 25 * 4)
+#define PCMD26 __REG(0x40F00080 + 26 * 4)
+#define PCMD27 __REG(0x40F00080 + 27 * 4)
+#define PCMD28 __REG(0x40F00080 + 28 * 4)
+#define PCMD29 __REG(0x40F00080 + 29 * 4)
+#define PCMD30 __REG(0x40F00080 + 30 * 4)
+#define PCMD31 __REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC (1<<12)
+#define PCMD_DCE (1<<11)
+#define PCMD_LC (1<<10)
+/* FIXME: PCMD_SQC need be checked. */
+#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
+ bit 9 should be 0 all day. */
+#define PVCR_VCSA (0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN (0x1 << 6)
+
+#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
+#define PSSR_RDH (1 << 5) /* Read Disable Hold */
+#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
+#define PSSR_STS (1 << 3) /* Standby Mode Status */
+#define PSSR_VFS (1 << 2) /* VDD Fault Status */
+#define PSSR_BFS (1 << 1) /* Battery Fault Status */
+#define PSSR_SSS (1 << 0) /* Software Sleep Status */
+
+#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO (1 << 15) /* RDH Override */
+#define PCFR_PO (1 << 14) /* PH Override */
+#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
+#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
+#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
+#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
+#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
+#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
+#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
+#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR (1 << 3) /* GPIO Reset */
+#define RCSR_SMR (1 << 2) /* Sleep Mode */
+#define RCSR_WDR (1 << 1) /* Watchdog Reset */
+#define RCSR_HWR (1 << 0) /* Hardware Reset */
+
+#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
+#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
+#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
+#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
+#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
+#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
+#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
+#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
+#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
+#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
+#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
+#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
+#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
+#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
+#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
+#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
+#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
+#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR io_p2v(0x41300000) /* Core Clock Configuration Register */
+#define CCSR io_p2v(0x4130000C) /* Core Clock Status Register */
+#define CKEN io_p2v(0x41300004) /* Clock Enable Register */
+#define OSCC io_p2v(0x41300008) /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CCCR_CPDIS_BIT (31)
+#define CCCR_PPDIS_BIT (30)
+#define CCCR_LCD_26_BIT (27)
+#define CCCR_A_BIT (25)
+
+#define CCSR_N2_MASK CCCR_N_MASK
+#define CCSR_M_MASK CCCR_M_MASK
+#define CCSR_L_MASK CCCR_L_MASK
+#define CCSR_N2_SHIFT 7
+
+#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
+#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
+#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
+#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
+#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
+#define CKEN_IM (20) /* Internal Memory Clock Enable */
+#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
+#define CKEN_USIM (18) /* USIM Unit Clock Enable */
+#define CKEN_MSL (17) /* MSL Unit Clock Enable */
+#define CKEN_LCD (16) /* LCD Unit Clock Enable */
+#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
+#define CKEN_I2C (14) /* I2C Unit Clock Enable */
+#define CKEN_FICP (13) /* FICP Unit Clock Enable */
+#define CKEN_MMC (12) /* MMC Unit Clock Enable */
+#define CKEN_USB (11) /* USB Unit Clock Enable */
+#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
+#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S (8) /* I2S Unit Clock Enable */
+#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
+#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
+#define CKEN_STUART (5) /* STUART Unit Clock Enable */
+#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
+#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
+#define CKEN_SSP (3) /* SSP Unit Clock Enable */
+#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
+#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
+#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
+#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
+
+#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE 0x1
+#define PWRMODE_STANDBY 0x2
+#define PWRMODE_SLEEP 0x3
+#define PWRMODE_DEEPSLEEP 0x7
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
new file mode 100644
index 0000000..888bf7a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -0,0 +1,206 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+ *
+ * PXA3xx specific register definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PXA3XX_REGS_H
+#define __ASM_ARCH_PXA3XX_REGS_H
+
+#include <mach/hardware.h>
+
+/*
+ * Oscillator Configuration Register (OSCC)
+ */
+#define OSCC io_p2v(0x41350000) /* Oscillator Configuration Register */
+
+#define OSCC_PEN (1 << 11) /* 13MHz POUT */
+
+
+/*
+ * Service Power Management Unit (MPMU)
+ */
+#define PMCR __REG(0x40F50000) /* Power Manager Control Register */
+#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */
+#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */
+#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */
+#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */
+#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */
+#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */
+#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */
+#define PCMD(x) __REG(0x40F50110 + ((x) << 2))
+
+/*
+ * Slave Power Management Unit
+ */
+#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */
+#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */
+#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */
+#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */
+#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */
+#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */
+#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */
+#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */
+#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */
+#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */
+#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */
+#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */
+#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */
+#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */
+
+/*
+ * Application Subsystem Configuration bits.
+ */
+#define ASCR_RDH (1 << 31)
+#define ASCR_D1S (1 << 2)
+#define ASCR_D2S (1 << 1)
+#define ASCR_D3S (1 << 0)
+
+/*
+ * Application Reset Status bits.
+ */
+#define ARSR_GPR (1 << 3)
+#define ARSR_LPMR (1 << 2)
+#define ARSR_WDT (1 << 1)
+#define ARSR_HWR (1 << 0)
+
+/*
+ * Application Subsystem Wake-Up bits.
+ */
+#define ADXER_WRTC (1 << 31) /* RTC */
+#define ADXER_WOST (1 << 30) /* OS Timer */
+#define ADXER_WTSI (1 << 29) /* Touchscreen */
+#define ADXER_WUSBH (1 << 28) /* USB host */
+#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */
+#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/
+#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */
+#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */
+#define ADXER_WKP (1 << 21) /* Keypad */
+#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */
+#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */
+#define ADXER_WOTG (1 << 16) /* USBOTG input */
+#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */
+#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */
+#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */
+#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */
+#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */
+#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */
+#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */
+#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */
+#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */
+#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */
+#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */
+#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */
+#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */
+#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */
+#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */
+#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */
+
+/*
+ * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320.
+ */
+#define ADXR_L2 (1 << 8)
+#define ADXR_R5 (1 << 5)
+#define ADXR_R4 (1 << 4)
+#define ADXR_R3 (1 << 3)
+#define ADXR_R2 (1 << 2)
+#define ADXR_R1 (1 << 1)
+#define ADXR_R0 (1 << 0)
+
+/*
+ * Values for PWRMODE CP15 register
+ */
+#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */
+#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */
+#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */
+#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */
+#define PXA3xx_PM_S0D0C1 0x01
+
+/*
+ * Application Subsystem Clock
+ */
+#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */
+#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */
+#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */
+#define CKENA __REG(0x4134000C) /* A Clock Enable Register */
+#define CKENB __REG(0x41340010) /* B Clock Enable Register */
+#define CKENC __REG(0x41340024) /* C Clock Enable Register */
+#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
+
+#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */
+#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */
+#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */
+#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */
+#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */
+
+#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */
+#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */
+#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */
+#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */
+#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */
+#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */
+#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */
+
+#define ACCR_SMCFS(x) (((x) & 0x7) << 23)
+#define ACCR_SFLFS(x) (((x) & 0x3) << 18)
+#define ACCR_XSPCLK(x) (((x) & 0x3) << 16)
+#define ACCR_HSS(x) (((x) & 0x3) << 14)
+#define ACCR_DMCFS(x) (((x) & 0x3) << 12)
+#define ACCR_XN(x) (((x) & 0x7) << 8)
+#define ACCR_XL(x) ((x) & 0x1f)
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD 1 /* < LCD Clock Enable */
+#define CKEN_USBH 2 /* < USB host clock enable */
+#define CKEN_CAMERA 3 /* < Camera interface clock enable */
+#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */
+#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC 9 /* < Static Memory Controller clock enable */
+#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT 11 /* < Boot rom clock enable */
+#define CKEN_MMC1 12 /* < MMC1 Clock enable */
+#define CKEN_MMC2 13 /* < MMC2 clock enable */
+#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */
+#define CKEN_CIR 15 /* < Consumer IR Clock Enable */
+#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */
+#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */
+#define CKEN_TPM 19 /* < TPM clock enable */
+#define CKEN_UDC 20 /* < UDC clock enable */
+#define CKEN_BTUART 21 /* < BTUART clock enable */
+#define CKEN_FFUART 22 /* < FFUART clock enable */
+#define CKEN_STUART 23 /* < STUART clock enable */
+#define CKEN_AC97 24 /* < AC97 clock enable */
+#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1 26 /* < SSP1 clock enable */
+#define CKEN_SSP2 27 /* < SSP2 clock enable */
+#define CKEN_SSP3 28 /* < SSP3 clock enable */
+#define CKEN_SSP4 29 /* < SSP4 clock enable */
+#define CKEN_MSL0 30 /* < MSL0 clock enable */
+#define CKEN_PWM0 32 /* < PWM[0] clock enable */
+#define CKEN_PWM1 33 /* < PWM[1] clock enable */
+#define CKEN_I2C 36 /* < I2C clock enable */
+#define CKEN_INTC 38 /* < Interrupt controller clock enable */
+#define CKEN_GPIO 39 /* < GPIO clock enable */
+#define CKEN_1WIRE 40 /* < 1-wire clock enable */
+#define CKEN_HSIO2 41 /* < HSIO2 clock enable */
+#define CKEN_MINI_IM 48 /* < Mini-IM */
+#define CKEN_MINI_LCD 49 /* < Mini LCD */
+
+#define CKEN_MMC3 5 /* < MMC3 Clock Enable */
+#define CKEN_MVED 43 /* < MVED clock enable */
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */
+#define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */
+
+#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ac97.h b/arch/arm/mach-pxa/include/mach/regs-ac97.h
new file mode 100644
index 0000000..1db96fd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ac97.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_REGS_AC97_H
+#define __ASM_ARCH_REGS_AC97_H
+
+#include <mach/hardware.h>
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR __REG(0x40500000) /* PCM Out Control Register */
+#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define PICR __REG(0x40500004) /* PCM In Control Register */
+#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MCCR __REG(0x40500008) /* Mic In Control Register */
+#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define GCR __REG(0x4050000C) /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
+#endif
+#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
+#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
+#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
+#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
+#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
+
+#define POSR __REG(0x40500010) /* PCM Out Status Register */
+#define POSR_FIFOE (1 << 4) /* FIFO error */
+#define POSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define PISR __REG(0x40500014) /* PCM In Status Register */
+#define PISR_FIFOE (1 << 4) /* FIFO error */
+#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MCSR __REG(0x40500018) /* Mic In Status Register */
+#define MCSR_FIFOE (1 << 4) /* FIFO error */
+#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define GSR __REG(0x4050001C) /* Global Status Register */
+#define GSR_CDONE (1 << 19) /* Command Done */
+#define GSR_SDONE (1 << 18) /* Status Done */
+#define GSR_RDCS (1 << 15) /* Read Completion Status */
+#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
+#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
+#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
+#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
+#define GSR_PCR (1 << 8) /* Primary Codec Ready */
+#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
+#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
+#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
+#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
+#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
+#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
+#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
+
+#define CAR __REG(0x40500020) /* CODEC Access Register */
+#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
+
+#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
+#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
+
+#define MOCR __REG(0x40500100) /* Modem Out Control Register */
+#define MOCR_FEIE (1 << 3) /* FIFO Error */
+#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MICR __REG(0x40500108) /* Modem In Control Register */
+#define MICR_FEIE (1 << 3) /* FIFO Error */
+#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
+
+#define MOSR __REG(0x40500110) /* Modem Out Status Register */
+#define MOSR_FIFOE (1 << 4) /* FIFO error */
+#define MOSR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MISR __REG(0x40500118) /* Modem In Status Register */
+#define MISR_FIFOE (1 << 4) /* FIFO error */
+#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR (1 << 2) /* FIFO Service Request */
+
+#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
+#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
+#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
+#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+
+#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
new file mode 100644
index 0000000..e2b6e3d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -0,0 +1,198 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_REGS_LCD_H
+#define __ASM_ARCH_REGS_LCD_H
+
+#include <mach/bitfield.h>
+
+/*
+ * LCD Controller Registers and Bits Definitions
+ */
+#define LCCR0 (0x000) /* LCD Controller Control Register 0 */
+#define LCCR1 (0x004) /* LCD Controller Control Register 1 */
+#define LCCR2 (0x008) /* LCD Controller Control Register 2 */
+#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */
+#define LCCR4 (0x010) /* LCD Controller Control Register 4 */
+#define LCCR5 (0x014) /* LCD Controller Control Register 5 */
+#define LCSR (0x038) /* LCD Controller Status Register 0 */
+#define LCSR1 (0x034) /* LCD Controller Status Register 1 */
+#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */
+#define TMEDRGBR (0x040) /* TMED RGB Seed Register */
+#define TMEDCR (0x044) /* TMED Control Register */
+
+#define FBR0 (0x020) /* DMA Channel 0 Frame Branch Register */
+#define FBR1 (0x024) /* DMA Channel 1 Frame Branch Register */
+#define FBR2 (0x028) /* DMA Channel 2 Frame Branch Register */
+#define FBR3 (0x02C) /* DMA Channel 2 Frame Branch Register */
+#define FBR4 (0x030) /* DMA Channel 2 Frame Branch Register */
+#define FBR5 (0x110) /* DMA Channel 2 Frame Branch Register */
+#define FBR6 (0x114) /* DMA Channel 2 Frame Branch Register */
+
+#define OVL1C1 (0x050) /* Overlay 1 Control Register 1 */
+#define OVL1C2 (0x060) /* Overlay 1 Control Register 2 */
+#define OVL2C1 (0x070) /* Overlay 2 Control Register 1 */
+#define OVL2C2 (0x080) /* Overlay 2 Control Register 2 */
+
+#define CMDCR (0x100) /* Command Control Register */
+#define PRSR (0x104) /* Panel Read Status Register */
+
+#define LCCR3_BPP(x) ((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0))
+
+#define LCCR3_PDFOR_0 (0 << 30)
+#define LCCR3_PDFOR_1 (1 << 30)
+#define LCCR3_PDFOR_2 (2 << 30)
+#define LCCR3_PDFOR_3 (3 << 30)
+
+#define LCCR4_PAL_FOR_0 (0 << 15)
+#define LCCR4_PAL_FOR_1 (1 << 15)
+#define LCCR4_PAL_FOR_2 (2 << 15)
+#define LCCR4_PAL_FOR_3 (3 << 15)
+#define LCCR4_PAL_FOR_MASK (3 << 15)
+
+#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */
+#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */
+#define FDADR2 (0x220) /* DMA Channel 2 Frame Descriptor Address Register */
+#define FDADR3 (0x230) /* DMA Channel 3 Frame Descriptor Address Register */
+#define FDADR4 (0x240) /* DMA Channel 4 Frame Descriptor Address Register */
+#define FDADR5 (0x250) /* DMA Channel 5 Frame Descriptor Address Register */
+#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */
+
+#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
+#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */
+#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
+#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
+#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display Select */
+#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
+#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
+
+#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */
+#define LCCR0_SFM (1 << 4) /* Start of frame mask */
+#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */
+#define LCCR0_EFM (1 << 6) /* End of Frame mask */
+#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */
+#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
+#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
+#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome) */
+#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome display */
+#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome display */
+#define LCCR0_DIS (1 << 10) /* LCD Disable */
+#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
+#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
+#define LCCR0_PDD_S 12
+#define LCCR0_BM (1 << 20) /* Branch mask */
+#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
+#define LCCR0_LCDT (1 << 22) /* LCD panel type */
+#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */
+#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */
+#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */
+#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */
+
+#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel) (((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
+#define LCCR1_HorSnchWdth(Tpix) (((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait - 1 */
+#define LCCR1_EndLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
+#define LCCR1_BegLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line) (((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse - 1 */
+#define LCCR2_VrtSnchWdth(Tln) (((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
+#define LCCR2_EndFrmDel(Tln) ((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
+#define LCCR2_BegFrmDel(Tln) ((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S 16
+#define LCCR3_VSP (1 << 20) /* vertical sync polarity */
+#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */
+#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
+
+#define LCCR3_OEP (1 << 23) /* Output Enable Polarity */
+#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
+#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
+
+#define LCCR3_DPC (1 << 27) /* double pixel clock mode */
+#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD)))
+
+#define LCCR3_ACB Fld (8, 8) /* AC Bias */
+#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH (LCCR3_HSP*0) /* HSP Active High */
+#define LCCR3_HorSnchL (LCCR3_HSP*1) /* HSP Active Low */
+
+#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* VSP Active High */
+#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* VSP Active Low */
+
+#define LCCR5_IUM(x) (1 << ((x) + 23)) /* input underrun mask */
+#define LCCR5_BSM(x) (1 << ((x) + 15)) /* branch mask */
+#define LCCR5_EOFM(x) (1 << ((x) + 7)) /* end of frame mask */
+#define LCCR5_SOFM(x) (1 << ((x) + 0)) /* start of frame mask */
+
+#define LCSR_LDD (1 << 0) /* LCD Disable Done */
+#define LCSR_SOF (1 << 1) /* Start of frame */
+#define LCSR_BER (1 << 2) /* Bus error */
+#define LCSR_ABC (1 << 3) /* AC Bias count */
+#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
+#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
+#define LCSR_OU (1 << 6) /* output FIFO underrun */
+#define LCSR_QD (1 << 7) /* quick disable */
+#define LCSR_EOF (1 << 8) /* end of frame */
+#define LCSR_BS (1 << 9) /* branch status */
+#define LCSR_SINT (1 << 10) /* subsequent interrupt */
+#define LCSR_RD_ST (1 << 11) /* read status */
+#define LCSR_CMD_INT (1 << 12) /* command interrupt */
+
+#define LCSR1_IU(x) (1 << ((x) + 23)) /* Input FIFO underrun */
+#define LCSR1_BS(x) (1 << ((x) + 15)) /* Branch Status */
+#define LCSR1_EOF(x) (1 << ((x) + 7)) /* End of Frame Status */
+#define LCSR1_SOF(x) (1 << ((x) - 1)) /* Start of Frame Status */
+
+#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
+
+/* overlay control registers */
+#define OVLxC1_PPL(x) ((((x) - 1) & 0x3ff) << 0) /* Pixels Per Line */
+#define OVLxC1_LPO(x) ((((x) - 1) & 0x3ff) << 10) /* Number of Lines */
+#define OVLxC1_BPP(x) (((x) & 0xf) << 20) /* Bits Per Pixel */
+#define OVLxC1_OEN (1 << 31) /* Enable bit for Overlay */
+#define OVLxC2_XPOS(x) (((x) & 0x3ff) << 0) /* Horizontal Position */
+#define OVLxC2_YPOS(x) (((x) & 0x3ff) << 10) /* Vertical Position */
+#define OVL2C2_PFOR(x) (((x) & 0x7) << 20) /* Pixel Format */
+
+/* smartpanel related */
+#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */
+#define PRSR_A0 (1 << 8) /* Read Data Source */
+#define PRSR_ST_OK (1 << 9) /* Status OK */
+#define PRSR_CON_NT (1 << 10) /* Continue to Next Command */
+
+#define SMART_CMD_A0 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND (0x1 << 9)
+#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9)
+#define SMART_CMD_NOOP (0x4 << 9)
+#define SMART_CMD_INTERRUPT (0x5 << 9)
+
+#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff))
+
+/* SMART_DELAY() is introduced for software controlled delay primitive which
+ * can be inserted between command sequences, unused command 0x6 is used here
+ * and delay ranges from 0ms ~ 255ms
+ */
+#define SMART_CMD_DELAY (0x6 << 9)
+#define SMART_DELAY(ms) (SMART_CMD_DELAY | ((ms) & 0xff))
+#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h
new file mode 100644
index 0000000..deb564e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ost.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MACH_REGS_OST_H
+#define __ASM_MACH_REGS_OST_H
+
+#include <mach/hardware.h>
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0 io_p2v(0x40A00000) /* */
+#define OSMR1 io_p2v(0x40A00004) /* */
+#define OSMR2 io_p2v(0x40A00008) /* */
+#define OSMR3 io_p2v(0x40A0000C) /* */
+#define OSMR4 io_p2v(0x40A00080) /* */
+#define OSCR io_p2v(0x40A00010) /* OS Timer Counter Register */
+#define OSCR4 io_p2v(0x40A00040) /* OS Timer Counter Register */
+#define OMCR4 io_p2v(0x40A000C0) /* */
+#define OSSR io_p2v(0x40A00014) /* OS Timer Status Register */
+#define OWER io_p2v(0x40A00018) /* OS Timer Watchdog Enable Register */
+#define OIER io_p2v(0x40A0001C) /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3 (1 << 3) /* Match status channel 3 */
+#define OSSR_M2 (1 << 2) /* Match status channel 2 */
+#define OSSR_M1 (1 << 1) /* Match status channel 1 */
+#define OSSR_M0 (1 << 0) /* Match status channel 0 */
+
+#define OWER_WME (1 << 0) /* Watchdog Match Enable */
+
+#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
+#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
+#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
+#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
+
+#endif /* __ASM_MACH_REGS_OST_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-uart.h b/arch/arm/mach-pxa/include/mach/regs-uart.h
new file mode 100644
index 0000000..9a168f8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-uart.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_REGS_UART_H
+#define __ASM_ARCH_REGS_UART_H
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART FFRBR
+#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
+#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
+#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
+#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
+#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
+#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
+#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
+#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
+#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
+#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
+#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
+#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART BTRBR
+#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
+#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
+#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
+#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
+#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
+#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
+#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
+#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
+#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
+#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
+#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
+#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART STRBR
+#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
+#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
+#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
+#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
+#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
+#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
+#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
+#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
+#define STMSR __REG(0x40700018) /* Reserved */
+#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
+#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
+#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART HWRBR
+#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
+#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
+#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
+#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
+#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
+#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
+#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
+#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
+#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
+#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
+#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
+#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
+#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
+#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
+#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE (1 << 7) /* DMA Requests Enable */
+#define IER_UUE (1 << 6) /* UART Unit Enable */
+#define IER_NRZE (1 << 5) /* NRZ coding Enable */
+#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
+#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
+#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
+#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
+#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
+#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
+#define IIR_TOD (1 << 3) /* Time Out Detected */
+#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
+#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
+#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
+
+#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
+#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
+#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
+#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
+#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1 (0)
+#define FCR_ITL_8 (FCR_ITL1)
+#define FCR_ITL_16 (FCR_ITL2)
+#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
+#define LCR_SB (1 << 6) /* Set Break */
+#define LCR_STKYP (1 << 5) /* Sticky Parity */
+#define LCR_EPS (1 << 4) /* Even Parity Select */
+#define LCR_PEN (1 << 3) /* Parity Enable */
+#define LCR_STB (1 << 2) /* Stop Bit */
+#define LCR_WLS1 (1 << 1) /* Word Length Select */
+#define LCR_WLS0 (1 << 0) /* Word Length Select */
+
+#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
+#define LSR_TEMT (1 << 6) /* Transmitter Empty */
+#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
+#define LSR_BI (1 << 4) /* Break Interrupt */
+#define LSR_FE (1 << 3) /* Framing Error */
+#define LSR_PE (1 << 2) /* Parity Error */
+#define LSR_OE (1 << 1) /* Overrun Error */
+#define LSR_DR (1 << 0) /* Data Ready */
+
+#define MCR_LOOP (1 << 4)
+#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
+#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
+#define MCR_RTS (1 << 1) /* Request to Send */
+#define MCR_DTR (1 << 0) /* Data Terminal Ready */
+
+#define MSR_DCD (1 << 7) /* Data Carrier Detect */
+#define MSR_RI (1 << 6) /* Ring Indicator */
+#define MSR_DSR (1 << 5) /* Data Set Ready */
+#define MSR_CTS (1 << 4) /* Clear To Send */
+#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
+#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
+#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
+#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
+#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
+#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
+#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
+
+#endif /* __ASM_ARCH_REGS_UART_H */
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
new file mode 100644
index 0000000..e1c4d10
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#define RESET_STATUS_HARDWARE (1 << 0) /* Hardware Reset */
+#define RESET_STATUS_WATCHDOG (1 << 1) /* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER (1 << 2) /* Low Power/Sleep Exit */
+#define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */
+#define RESET_STATUS_ALL (0xf)
+
+extern unsigned int reset_status;
+extern void clear_reset_status(unsigned int mask);
+
+/**
+ * init_gpio_reset() - register GPIO as reset generator
+ * @gpio: gpio nr
+ * @output: set gpio as output instead of input during normal work
+ * @level: output level
+ */
+extern int init_gpio_reset(int gpio, int output, int level);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h
new file mode 100644
index 0000000..b802f28
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -0,0 +1,75 @@
+/*
+ * Static memory controller register definitions for PXA CPUs
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SMEMC_REGS_H
+#define __SMEMC_REGS_H
+
+#define PXA2XX_SMEMC_BASE 0x48000000
+#define PXA3XX_SMEMC_BASE 0x4a000000
+#define SMEMC_VIRT IOMEM(0xf6000000)
+
+#define MDCNFG (SMEMC_VIRT + 0x00) /* SDRAM Configuration Register 0 */
+#define MDREFR (SMEMC_VIRT + 0x04) /* SDRAM Refresh Control Register */
+#define MSC0 (SMEMC_VIRT + 0x08) /* Static Memory Control Register 0 */
+#define MSC1 (SMEMC_VIRT + 0x0C) /* Static Memory Control Register 1 */
+#define MSC2 (SMEMC_VIRT + 0x10) /* Static Memory Control Register 2 */
+#define MECR (SMEMC_VIRT + 0x14) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR (SMEMC_VIRT + 0x18) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG (SMEMC_VIRT + 0x1C) /* Synchronous Static Memory Control Register */
+#define SXMRS (SMEMC_VIRT + 0x24) /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0 (SMEMC_VIRT + 0x28) /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1 (SMEMC_VIRT + 0x2C) /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0 (SMEMC_VIRT + 0x30) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1 (SMEMC_VIRT + 0x34) /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0 (SMEMC_VIRT + 0x38) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1 (SMEMC_VIRT + 0x3C) /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS (SMEMC_VIRT + 0x40) /* MRS value to be written to SDRAM */
+#define BOOT_DEF (SMEMC_VIRT + 0x44) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+#define MEMCLKCFG (SMEMC_VIRT + 0x68) /* Clock Configuration */
+#define CSADRCFG0 (SMEMC_VIRT + 0x80) /* Address Configuration Register for CS0 */
+#define CSADRCFG1 (SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */
+#define CSADRCFG2 (SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */
+#define CSADRCFG3 (SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */
+#define CSMSADRCFG (SMEMC_VIRT + 0xA0) /* Chip Select Configuration Register */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s) (SMEMC_VIRT + 0x28 + ((s)<<2)) /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s) (SMEMC_VIRT + 0x30 + ((s)<<2)) /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s) (SMEMC_VIRT + 0x38 + ((s)<<2)) /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
+
+#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
+#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
+#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
new file mode 100644
index 0000000..25c9f62
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -0,0 +1,189 @@
+/*
+ * Hardware specific definitions for SL-Cx000 series of PDAs
+ *
+ * Copyright (c) 2005 Alexander Wykes
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_SPITZ_H
+#define __ASM_ARCH_SPITZ_H 1
+#endif
+
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */
+#include <linux/fb.h>
+
+/* Spitz/Akita GPIOs */
+
+#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */
+#define SPITZ_GPIO_RESET (1)
+#define SPITZ_GPIO_nSD_DETECT (9)
+#define SPITZ_GPIO_TP_INT (11) /* Touch Panel interrupt */
+#define SPITZ_GPIO_AK_INT (13) /* Remote Control */
+#define SPITZ_GPIO_ADS7846_CS (14)
+#define SPITZ_GPIO_SYNC (16)
+#define SPITZ_GPIO_MAX1111_CS (20)
+#define SPITZ_GPIO_FATAL_BAT (21)
+#define SPITZ_GPIO_HSYNC (22)
+#define SPITZ_GPIO_nSD_CLK (32)
+#define SPITZ_GPIO_USB_DEVICE (35)
+#define SPITZ_GPIO_USB_HOST (37)
+#define SPITZ_GPIO_USB_CONNECT (41)
+#define SPITZ_GPIO_LCDCON_CS (53)
+#define SPITZ_GPIO_nPCE (54)
+#define SPITZ_GPIO_nSD_WP (81)
+#define SPITZ_GPIO_ON_RESET (89)
+#define SPITZ_GPIO_BAT_COVER (90)
+#define SPITZ_GPIO_CF_CD (94)
+#define SPITZ_GPIO_ON_KEY (95)
+#define SPITZ_GPIO_SWA (97)
+#define SPITZ_GPIO_SWB (96)
+#define SPITZ_GPIO_CHRG_FULL (101)
+#define SPITZ_GPIO_CO (101)
+#define SPITZ_GPIO_CF_IRQ (105)
+#define SPITZ_GPIO_AC_IN (115)
+#define SPITZ_GPIO_HP_IN (116)
+
+/* Spitz Only GPIOs */
+
+#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */
+#define SPITZ_GPIO_CF2_CD (93)
+
+
+/* Spitz/Akita Keyboard Definitions */
+
+#define SPITZ_KEY_STROBE_NUM (11)
+#define SPITZ_KEY_SENSE_NUM (7)
+#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000
+#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000
+#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000
+#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880
+#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000
+#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4
+#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000
+#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000
+
+#define SPITZ_GPIO_KEY_STROBE0 88
+#define SPITZ_GPIO_KEY_STROBE1 23
+#define SPITZ_GPIO_KEY_STROBE2 24
+#define SPITZ_GPIO_KEY_STROBE3 25
+#define SPITZ_GPIO_KEY_STROBE4 26
+#define SPITZ_GPIO_KEY_STROBE5 27
+#define SPITZ_GPIO_KEY_STROBE6 52
+#define SPITZ_GPIO_KEY_STROBE7 103
+#define SPITZ_GPIO_KEY_STROBE8 107
+#define SPITZ_GPIO_KEY_STROBE9 108
+#define SPITZ_GPIO_KEY_STROBE10 114
+
+#define SPITZ_GPIO_KEY_SENSE0 12
+#define SPITZ_GPIO_KEY_SENSE1 17
+#define SPITZ_GPIO_KEY_SENSE2 91
+#define SPITZ_GPIO_KEY_SENSE3 34
+#define SPITZ_GPIO_KEY_SENSE4 36
+#define SPITZ_GPIO_KEY_SENSE5 38
+#define SPITZ_GPIO_KEY_SENSE6 39
+
+
+/* Spitz Scoop Device (No. 1) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Keep */
+#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Keep */
+#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Keep */
+#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Low */
+#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Low */
+#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* Keep */
+#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Keep */
+#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */
+#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */
+
+#define SPITZ_SCP_IO_DIR (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+ SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \
+ SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
+#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_SUS_SET 0
+
+#define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
+#define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0)
+#define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1)
+#define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2)
+#define SPITZ_GPIO_MUTE_L (SPITZ_SCP_GPIO_BASE + 3)
+#define SPITZ_GPIO_MUTE_R (SPITZ_SCP_GPIO_BASE + 4)
+#define SPITZ_GPIO_CF_POWER (SPITZ_SCP_GPIO_BASE + 5)
+#define SPITZ_GPIO_LED_ORANGE (SPITZ_SCP_GPIO_BASE + 6)
+#define SPITZ_GPIO_JK_A (SPITZ_SCP_GPIO_BASE + 7)
+#define SPITZ_GPIO_ADC_TEMP_ON (SPITZ_SCP_GPIO_BASE + 8)
+
+/* Spitz Scoop Device (No. 2) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */
+#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Keep */
+#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */
+#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */
+#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */
+#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */
+#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Low */
+#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */
+#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */
+
+#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+ SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+
+#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
+
+#define SPITZ_SCP2_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
+#define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0)
+#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1)
+#define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2)
+#define SPITZ_GPIO_RESERVED_2 (SPITZ_SCP2_GPIO_BASE + 3)
+#define SPITZ_GPIO_RESERVED_3 (SPITZ_SCP2_GPIO_BASE + 4)
+#define SPITZ_GPIO_RESERVED_4 (SPITZ_SCP2_GPIO_BASE + 5)
+#define SPITZ_GPIO_BACKLIGHT_CONT (SPITZ_SCP2_GPIO_BASE + 6)
+#define SPITZ_GPIO_BACKLIGHT_ON (SPITZ_SCP2_GPIO_BASE + 7)
+#define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8)
+
+/* Akita IO Expander GPIOs */
+#define AKITA_IOEXP_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
+#define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0)
+#define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1)
+#define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2)
+#define AKITA_GPIO_BACKLIGHT_ON (AKITA_IOEXP_GPIO_BASE + 3)
+#define AKITA_GPIO_BACKLIGHT_CONT (AKITA_IOEXP_GPIO_BASE + 4)
+#define AKITA_GPIO_AKIN_PULLUP (AKITA_IOEXP_GPIO_BASE + 5)
+#define AKITA_GPIO_IR_ON (AKITA_IOEXP_GPIO_BASE + 6)
+#define AKITA_GPIO_RESERVED_7 (AKITA_IOEXP_GPIO_BASE + 7)
+
+/* Spitz IRQ Definitions */
+
+#define SPITZ_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_SWA PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWB PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_BAT_COVER PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER)
+#define SPITZ_IRQ_GPIO_FATAL_BAT PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT)
+#define SPITZ_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO)
+#define SPITZ_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF2_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT)
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device spitzssp_device;
+extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
new file mode 100644
index 0000000..0497d95
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -0,0 +1,202 @@
+/*
+ * Hardware specific definitions for Sharp SL-C6000x series of PDAs
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_ARCH_TOSA_H_
+#define _ASM_ARCH_TOSA_H_ 1
+
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
+/* TOSA Chip selects */
+#define TOSA_LCDC_PHYS PXA_CS4_PHYS
+/* Internel Scoop */
+#define TOSA_CF_PHYS (PXA_CS2_PHYS + 0x00800000)
+/* Jacket Scoop */
+#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000)
+
+#define TOSA_NR_IRQS (IRQ_BOARD_START + TC6393XB_NR_IRQS)
+/*
+ * SCOOP2 internal GPIOs
+ */
+#define TOSA_SCOOP_GPIO_BASE PXA_NR_BUILTIN_GPIO
+#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11
+#define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1)
+#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2)
+#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3)
+#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4)
+#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16
+#define TOSA_GPIO_BT_RESET (TOSA_SCOOP_GPIO_BASE + 6)
+#define TOSA_GPIO_BT_PWR_EN (TOSA_SCOOP_GPIO_BASE + 7)
+#define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19
+
+/* GPIO Direction 1 : output mode / 0:input mode */
+#define TOSA_SCOOP_IO_DIR (TOSA_SCOOP_PXA_VCORE1 | \
+ TOSA_SCOOP_AUD_PWR_ON)
+
+/*
+ * SCOOP2 jacket GPIOs
+ */
+#define TOSA_SCOOP_JC_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
+#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0)
+#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1)
+#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2)
+#define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3)
+#define TOSA_GPIO_TC6393XB_SUSPEND (TOSA_SCOOP_JC_GPIO_BASE + 4)
+#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5)
+#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17
+#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7)
+#define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19
+
+/* GPIO Direction 1 : output mode / 0:input mode */
+#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
+
+/*
+ * TC6393XB GPIOs
+ */
+#define TOSA_TC6393XB_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 2 * 12)
+
+#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0)
+#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1)
+#define TOSA_GPIO_BL_C20MA (TOSA_TC6393XB_GPIO_BASE + 3)
+#define TOSA_GPIO_CARD_VCC_ON (TOSA_TC6393XB_GPIO_BASE + 4)
+#define TOSA_GPIO_CHARGE_OFF (TOSA_TC6393XB_GPIO_BASE + 6)
+#define TOSA_GPIO_CHARGE_OFF_JC (TOSA_TC6393XB_GPIO_BASE + 7)
+#define TOSA_GPIO_BAT0_V_ON (TOSA_TC6393XB_GPIO_BASE + 9)
+#define TOSA_GPIO_BAT1_V_ON (TOSA_TC6393XB_GPIO_BASE + 10)
+#define TOSA_GPIO_BU_CHRG_ON (TOSA_TC6393XB_GPIO_BASE + 11)
+#define TOSA_GPIO_BAT_SW_ON (TOSA_TC6393XB_GPIO_BASE + 12)
+#define TOSA_GPIO_BAT0_TH_ON (TOSA_TC6393XB_GPIO_BASE + 14)
+#define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15)
+
+/*
+ * Timing Generator
+ */
+#define TG_PNLCTL 0x00
+#define TG_TPOSCTL 0x01
+#define TG_DUTYCTL 0x02
+#define TG_GPOSR 0x03
+#define TG_GPODR1 0x04
+#define TG_GPODR2 0x05
+#define TG_PINICTL 0x06
+#define TG_HPOSCTL 0x07
+
+/*
+ * PXA GPIOs
+ */
+#define TOSA_GPIO_POWERON (0)
+#define TOSA_GPIO_RESET (1)
+#define TOSA_GPIO_AC_IN (2)
+#define TOSA_GPIO_RECORD_BTN (3)
+#define TOSA_GPIO_SYNC (4) /* Cradle SYNC Button */
+#define TOSA_GPIO_USB_IN (5)
+#define TOSA_GPIO_JACKET_DETECT (7)
+#define TOSA_GPIO_nSD_DETECT (9)
+#define TOSA_GPIO_nSD_INT (10)
+#define TOSA_GPIO_TC6393XB_CLK (11)
+#define TOSA_GPIO_BAT1_CRG (12)
+#define TOSA_GPIO_CF_CD (13)
+#define TOSA_GPIO_BAT0_CRG (14)
+#define TOSA_GPIO_TC6393XB_INT (15)
+#define TOSA_GPIO_BAT0_LOW (17)
+#define TOSA_GPIO_TC6393XB_RDY (18)
+#define TOSA_GPIO_ON_RESET (19)
+#define TOSA_GPIO_EAR_IN (20)
+#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */
+#define TOSA_GPIO_ON_KEY (22)
+#define TOSA_GPIO_VGA_LINE (27)
+#define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */
+#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */
+#define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */
+#define TOSA_GPIO_IRDA_TX (47)
+#define TOSA_GPIO_TG_SPI_SCLK (81)
+#define TOSA_GPIO_TG_SPI_CS (82)
+#define TOSA_GPIO_TG_SPI_MOSI (83)
+#define TOSA_GPIO_BAT1_LOW (84)
+
+#define TOSA_GPIO_HP_IN GPIO_EAR_IN
+
+#define TOSA_GPIO_MAIN_BAT_LOW GPIO_BAT0_LOW
+
+#define TOSA_KEY_STROBE_NUM (11)
+#define TOSA_KEY_SENSE_NUM (7)
+
+#define TOSA_GPIO_HIGH_STROBE_BIT (0xfc000000)
+#define TOSA_GPIO_LOW_STROBE_BIT (0x0000001f)
+#define TOSA_GPIO_ALL_SENSE_BIT (0x00000fe0)
+#define TOSA_GPIO_ALL_SENSE_RSHIFT (5)
+#define TOSA_GPIO_STROBE_BIT(a) GPIO_bit(58+(a))
+#define TOSA_GPIO_SENSE_BIT(a) GPIO_bit(69+(a))
+#define TOSA_GAFR_HIGH_STROBE_BIT (0xfff00000)
+#define TOSA_GAFR_LOW_STROBE_BIT (0x000003ff)
+#define TOSA_GAFR_ALL_SENSE_BIT (0x00fffc00)
+#define TOSA_GPIO_KEY_SENSE(a) (69+(a))
+#define TOSA_GPIO_KEY_STROBE(a) (58+(a))
+
+/*
+ * Interrupts
+ */
+#define TOSA_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP)
+#define TOSA_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN)
+#define TOSA_IRQ_GPIO_RECORD_BTN PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN)
+#define TOSA_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC)
+#define TOSA_IRQ_GPIO_USB_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN)
+#define TOSA_IRQ_GPIO_JACKET_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT)
+#define TOSA_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT)
+#define TOSA_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT)
+#define TOSA_IRQ_GPIO_BAT1_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG)
+#define TOSA_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD)
+#define TOSA_IRQ_GPIO_BAT0_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG)
+#define TOSA_IRQ_GPIO_TC6393XB_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT)
+#define TOSA_IRQ_GPIO_BAT0_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW)
+#define TOSA_IRQ_GPIO_EAR_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN)
+#define TOSA_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ)
+#define TOSA_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY)
+#define TOSA_IRQ_GPIO_VGA_LINE PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE)
+#define TOSA_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT)
+#define TOSA_IRQ_GPIO_JC_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ)
+#define TOSA_IRQ_GPIO_BAT_LOCKED PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED)
+#define TOSA_IRQ_GPIO_BAT1_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW)
+#define TOSA_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(69+(a))
+
+#define TOSA_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW)
+
+#define TOSA_KEY_SYNC KEY_102ND /* ??? */
+
+#ifndef CONFIG_TOSA_USE_EXT_KEYCODES
+#define TOSA_KEY_RECORD KEY_YEN
+#define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA
+#define TOSA_KEY_CANCEL KEY_ESC
+#define TOSA_KEY_CENTER KEY_HIRAGANA
+#define TOSA_KEY_OK KEY_HENKAN
+#define TOSA_KEY_CALENDAR KEY_KATAKANAHIRAGANA
+#define TOSA_KEY_HOMEPAGE KEY_HANGEUL
+#define TOSA_KEY_LIGHT KEY_MUHENKAN
+#define TOSA_KEY_MENU KEY_HANJA
+#define TOSA_KEY_FN KEY_RIGHTALT
+#define TOSA_KEY_MAIL KEY_ZENKAKUHANKAKU
+#else
+#define TOSA_KEY_RECORD KEY_RECORD
+#define TOSA_KEY_ADDRESSBOOK KEY_ADDRESSBOOK
+#define TOSA_KEY_CANCEL KEY_CANCEL
+#define TOSA_KEY_CENTER KEY_SELECT /* ??? */
+#define TOSA_KEY_OK KEY_OK
+#define TOSA_KEY_CALENDAR KEY_CALENDAR
+#define TOSA_KEY_HOMEPAGE KEY_HOMEPAGE
+#define TOSA_KEY_LIGHT KEY_KBDILLUMTOGGLE
+#define TOSA_KEY_MENU KEY_MENU
+#define TOSA_KEY_FN KEY_FN
+#define TOSA_KEY_MAIL KEY_MAIL
+#endif
+
+struct spi_device;
+extern int tosa_bl_enable(struct spi_device *spi, int enable);
+
+#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
new file mode 100644
index 0000000..3cddb14
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/************************************************************************
+ * Include file for TRIZEPS4 SoM and ConXS eval-board
+ * Copyright (c) Jürgen Schindele
+ * 2006
+ ************************************************************************/
+
+/*
+ * Includes/Defines
+ */
+#ifndef _TRIPEPS4_H_
+#define _TRIPEPS4_H_
+
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
+/* physical memory regions */
+#define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
+#define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */
+#define TRIZEPS4_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */
+#define TRIZEPS4_PIC_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board */
+#define TRIZEPS4_SDRAM_BASE 0xa0000000 /* SDRAM region */
+
+ /* Logic on ConXS-board CSFR register*/
+#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS)
+ /* Logic on ConXS-board BOCR register*/
+#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000)
+ /* Logic on ConXS-board IRCR register*/
+#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000)
+ /* Logic on ConXS-board UPSR register*/
+#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000)
+ /* Logic on ConXS-board DICR register*/
+#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000)
+
+/* virtual memory regions */
+#define TRIZEPS4_DISK_VIRT 0xF0000000 /* Disk On Chip region */
+
+#define TRIZEPS4_PIC_VIRT 0xF0100000 /* not used */
+#define TRIZEPS4_CFSR_VIRT 0xF0100000
+#define TRIZEPS4_BOCR_VIRT 0xF0200000
+#define TRIZEPS4_DICR_VIRT 0xF0300000
+#define TRIZEPS4_IRCR_VIRT 0xF0400000
+#define TRIZEPS4_UPSR_VIRT 0xF0500000
+
+/* size of flash */
+#define TRIZEPS4_FLASH_SIZE 0x02000000 /* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000 101
+#define TRIZEPS4_ETH_IRQ PXA_GPIO_TO_IRQ(GPIO_DM9000)
+
+/* UCB1400 audio / TS-controller */
+#define GPIO_UCB1400 1
+#define TRIZEPS4_UCB1400_IRQ PXA_GPIO_TO_IRQ(GPIO_UCB1400)
+
+/* PCMCIA socket Compact Flash */
+#define GPIO_PCD 11 /* PCMCIA Card Detect */
+#define TRIZEPS4_CD_IRQ PXA_GPIO_TO_IRQ(GPIO_PCD)
+#define GPIO_PRDY 13 /* READY / nINT */
+#define TRIZEPS4_READY_NINT PXA_GPIO_TO_IRQ(GPIO_PRDY)
+
+/* MMC socket */
+#define GPIO_MMC_DET 12
+#define TRIZEPS4_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO_MMC_DET)
+
+/* DOC NAND chip */
+#define GPIO_DOC_LOCK 94
+#define GPIO_DOC_IRQ 93
+#define TRIZEPS4_DOC_IRQ PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ)
+
+/* SPI interface */
+#define GPIO_SPI 53
+#define TRIZEPS4_SPI_IRQ PXA_GPIO_TO_IRQ(GPIO_SPI)
+
+/* LEDS using tx2 / rx2 */
+#define GPIO_SYS_BUSY_LED 46
+#define GPIO_HEARTBEAT_LED 47
+
+/* Off-module PIC on ConXS board */
+#define GPIO_PIC 0
+#define TRIZEPS4_PIC_IRQ PXA_GPIO_TO_IRQ(GPIO_PIC)
+
+#ifdef CONFIG_MACH_TRIZEPS_CONXS
+/* for CONXS base board define these registers */
+#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+
+#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+
+#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#define IRCR_P2V(x) ((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT)
+#define IRCR_V2P(x) ((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS)
+
+#ifndef __ASSEMBLY__
+static inline unsigned short CFSR_readw(void)
+{
+ /* [Compact Flash Status Register] is read only */
+ return *((unsigned short *)CFSR_P2V(0x0C000000));
+}
+static inline void BCR_writew(unsigned short value)
+{
+ /* [Board Control Regsiter] is write only */
+ *((unsigned short *)BCR_P2V(0x0E000000)) = value;
+}
+static inline void DCR_writew(unsigned short value)
+{
+ /* [Display Control Register] is write only */
+ *((unsigned short *)DCR_P2V(0x0E000000)) = value;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+ /* [InfraRed data Control Register] is write only */
+ *((unsigned short *)IRCR_P2V(0x0E000000)) = value;
+}
+#else
+#define ConXS_CFSR CFSR_P2V(0x0C000000)
+#define ConXS_BCR BCR_P2V(0x0E000000)
+#define ConXS_DCR DCR_P2V(0x0F800000)
+#define ConXS_IRCR IRCR_P2V(0x0F800000)
+#endif
+#else
+/* for whatever baseboard define function registers */
+static inline unsigned short CFSR_readw(void)
+{
+ return 0;
+}
+static inline void BCR_writew(unsigned short value)
+{
+ ;
+}
+static inline void DCR_writew(unsigned short value)
+{
+ ;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+ ;
+}
+#endif /* CONFIG_MACH_TRIZEPS_CONXS */
+
+#define ConXS_CFSR_BVD_MASK 0x0003
+#define ConXS_CFSR_BVD1 (1 << 0)
+#define ConXS_CFSR_BVD2 (1 << 1)
+#define ConXS_CFSR_VS_MASK 0x000C
+#define ConXS_CFSR_VS1 (1 << 2)
+#define ConXS_CFSR_VS2 (1 << 3)
+#define ConXS_CFSR_VS_5V (0x3 << 2)
+#define ConXS_CFSR_VS_3V3 0x0
+
+#define ConXS_BCR_S0_POW_EN0 (1 << 0)
+#define ConXS_BCR_S0_POW_EN1 (1 << 1)
+#define ConXS_BCR_L_DISP (1 << 4)
+#define ConXS_BCR_CF_BUF_EN (1 << 5)
+#define ConXS_BCR_CF_RESET (1 << 7)
+#define ConXS_BCR_S0_VCC_3V3 0x1
+#define ConXS_BCR_S0_VCC_5V0 0x2
+#define ConXS_BCR_S0_VPP_12V 0x4
+#define ConXS_BCR_S0_VPP_3V3 0x8
+
+#define ConXS_IRCR_MODE (1 << 0)
+#define ConXS_IRCR_SD (1 << 1)
+
+#endif /* _TRIPEPS4_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
new file mode 100644
index 0000000..8c27757
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-pxa/include/mach/uncompress.h
+ *
+ * Author: Nicolas Pitre
+ * Copyright: (C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/mach-types.h>
+
+#define FFUART_BASE (0x40100000)
+#define BTUART_BASE (0x40200000)
+#define STUART_BASE (0x40700000)
+
+unsigned long uart_base;
+unsigned int uart_shift;
+unsigned int uart_is_pxa;
+
+static inline unsigned char uart_read(int offset)
+{
+ return *(volatile unsigned char *)(uart_base + (offset << uart_shift));
+}
+
+static inline void uart_write(unsigned char val, int offset)
+{
+ *(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val;
+}
+
+static inline int uart_is_enabled(void)
+{
+ /* assume enabled by default for non-PXA uarts */
+ return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1;
+}
+
+static inline void putc(char c)
+{
+ if (!uart_is_enabled())
+ return;
+
+ while (!(uart_read(UART_LSR) & UART_LSR_THRE))
+ barrier();
+
+ uart_write(c, UART_TX);
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+ /* initialize to default */
+ uart_base = FFUART_BASE;
+ uart_shift = 2;
+ uart_is_pxa = 1;
+
+ if (machine_is_littleton() || machine_is_intelmote2()
+ || machine_is_csb726() || machine_is_stargate2()
+ || machine_is_cm_x300() || machine_is_balloon3())
+ uart_base = STUART_BASE;
+
+ if (machine_is_arcom_zeus()) {
+ uart_base = 0x10000000; /* nCS4 */
+ uart_shift = 1;
+ uart_is_pxa = 0;
+ }
+}
diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/include/mach/vpac270.h
new file mode 100644
index 0000000..7bfa3dd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/vpac270.h
@@ -0,0 +1,42 @@
+/*
+ * GPIOs and interrupts for Voipac PXA270
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_VPAC270_H_
+#define _INCLUDE_VPAC270_H_
+
+#define GPIO1_VPAC270_USER_BTN 1
+
+#define GPIO15_VPAC270_LED_ORANGE 15
+
+#define GPIO81_VPAC270_BKL_ON 81
+#define GPIO83_VPAC270_NL_ON 83
+
+#define GPIO52_VPAC270_SD_READONLY 52
+#define GPIO53_VPAC270_SD_DETECT_N 53
+
+#define GPIO84_VPAC270_PCMCIA_CD 84
+#define GPIO35_VPAC270_PCMCIA_RDY 35
+#define GPIO107_VPAC270_PCMCIA_PPEN 107
+#define GPIO11_VPAC270_PCMCIA_RESET 11
+#define GPIO17_VPAC270_CF_CD 17
+#define GPIO12_VPAC270_CF_RDY 12
+#define GPIO16_VPAC270_CF_RESET 16
+
+#define GPIO41_VPAC270_UDC_DETECT 41
+
+#define GPIO114_VPAC270_ETH_IRQ 114
+
+#define GPIO36_VPAC270_IDE_IRQ 36
+
+#define GPIO113_VPAC270_TS_IRQ 113
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h
new file mode 100644
index 0000000..7b0f71e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/z2.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-pxa/include/mach/z2.h
+ *
+ * Author: Ken McGuire
+ * Created: Feb 6, 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_ZIPIT2_H
+#define ASM_ARCH_ZIPIT2_H
+
+/* LEDs */
+#define GPIO10_ZIPITZ2_LED_WIFI 10
+#define GPIO85_ZIPITZ2_LED_CHARGED 85
+#define GPIO83_ZIPITZ2_LED_CHARGING 83
+
+/* SD/MMC */
+#define GPIO96_ZIPITZ2_SD_DETECT 96
+
+/* GPIO Buttons */
+#define GPIO1_ZIPITZ2_POWER_BUTTON 1
+#define GPIO98_ZIPITZ2_LID_BUTTON 98
+
+/* Libertas GSPI8686 WiFi */
+#define GPIO14_ZIPITZ2_WIFI_POWER 14
+#define GPIO24_ZIPITZ2_WIFI_CS 24
+#define GPIO36_ZIPITZ2_WIFI_IRQ 36
+
+/* LCD */
+#define GPIO19_ZIPITZ2_LCD_RESET 19
+#define GPIO88_ZIPITZ2_LCD_CS 88
+
+/* MISC GPIOs */
+#define GPIO0_ZIPITZ2_AC_DETECT 0
+#define GPIO37_ZIPITZ2_HEADSET_DETECT 37
+
+#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
new file mode 100644
index 0000000..4e8c211
--- /dev/null
+++ b/arch/arm/mach-pxa/irq.c
@@ -0,0 +1,273 @@
+/*
+ * linux/arch/arm/mach-pxa/irq.c
+ *
+ * Generic PXA IRQ handling
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/exception.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#include "generic.h"
+
+#define ICIP (0x000)
+#define ICMR (0x004)
+#define ICLR (0x008)
+#define ICFR (0x00c)
+#define ICPR (0x010)
+#define ICCR (0x014)
+#define ICHP (0x018)
+#define IPR(i) (((i) < 32) ? (0x01c + ((i) << 2)) : \
+ ((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) : \
+ (0x144 + (((i) - 64) << 2)))
+#define ICHP_VAL_IRQ (1 << 31)
+#define ICHP_IRQ(i) (((i) >> 16) & 0x7fff)
+#define IPR_VALID (1 << 31)
+
+#define MAX_INTERNAL_IRQS 128
+
+/*
+ * This is for peripheral IRQs internal to the PXA chip.
+ */
+
+static void __iomem *pxa_irq_base;
+static int pxa_internal_irq_nr;
+static bool cpu_has_ipr;
+static struct irq_domain *pxa_irq_domain;
+
+static inline void __iomem *irq_base(int i)
+{
+ static unsigned long phys_base_offset[] = {
+ 0x0,
+ 0x9c,
+ 0x130,
+ };
+
+ return pxa_irq_base + phys_base_offset[i];
+}
+
+void pxa_mask_irq(struct irq_data *d)
+{
+ void __iomem *base = irq_data_get_irq_chip_data(d);
+ irq_hw_number_t irq = irqd_to_hwirq(d);
+ uint32_t icmr = __raw_readl(base + ICMR);
+
+ icmr &= ~BIT(irq & 0x1f);
+ __raw_writel(icmr, base + ICMR);
+}
+
+void pxa_unmask_irq(struct irq_data *d)
+{
+ void __iomem *base = irq_data_get_irq_chip_data(d);
+ irq_hw_number_t irq = irqd_to_hwirq(d);
+ uint32_t icmr = __raw_readl(base + ICMR);
+
+ icmr |= BIT(irq & 0x1f);
+ __raw_writel(icmr, base + ICMR);
+}
+
+static struct irq_chip pxa_internal_irq_chip = {
+ .name = "SC",
+ .irq_ack = pxa_mask_irq,
+ .irq_mask = pxa_mask_irq,
+ .irq_unmask = pxa_unmask_irq,
+};
+
+asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs)
+{
+ uint32_t icip, icmr, mask;
+
+ do {
+ icip = __raw_readl(pxa_irq_base + ICIP);
+ icmr = __raw_readl(pxa_irq_base + ICMR);
+ mask = icip & icmr;
+
+ if (mask == 0)
+ break;
+
+ handle_IRQ(PXA_IRQ(fls(mask) - 1), regs);
+ } while (1);
+}
+
+asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs)
+{
+ uint32_t ichp;
+
+ do {
+ __asm__ __volatile__("mrc p6, 0, %0, c5, c0, 0\n": "=r"(ichp));
+
+ if ((ichp & ICHP_VAL_IRQ) == 0)
+ break;
+
+ handle_IRQ(PXA_IRQ(ICHP_IRQ(ichp)), regs);
+ } while (1);
+}
+
+static int pxa_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ void __iomem *base = irq_base(hw / 32);
+
+ /* initialize interrupt priority */
+ if (cpu_has_ipr)
+ __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw));
+
+ irq_set_chip_and_handler(virq, &pxa_internal_irq_chip,
+ handle_level_irq);
+ irq_set_chip_data(virq, base);
+
+ return 0;
+}
+
+static const struct irq_domain_ops pxa_irq_ops = {
+ .map = pxa_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static __init void
+pxa_init_irq_common(struct device_node *node, int irq_nr,
+ int (*fn)(struct irq_data *, unsigned int))
+{
+ int n;
+
+ pxa_internal_irq_nr = irq_nr;
+ pxa_irq_domain = irq_domain_add_legacy(node, irq_nr,
+ PXA_IRQ(0), 0,
+ &pxa_irq_ops, NULL);
+ if (!pxa_irq_domain)
+ panic("Unable to add PXA IRQ domain\n");
+ irq_set_default_host(pxa_irq_domain);
+
+ for (n = 0; n < irq_nr; n += 32) {
+ void __iomem *base = irq_base(n >> 5);
+
+ __raw_writel(0, base + ICMR); /* disable all IRQs */
+ __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */
+ }
+ /* only unmasked interrupts kick us out of idle */
+ __raw_writel(1, irq_base(0) + ICCR);
+
+ pxa_internal_irq_chip.irq_set_wake = fn;
+}
+
+void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
+{
+ BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
+
+ pxa_irq_base = io_p2v(0x40d00000);
+ cpu_has_ipr = !cpu_is_pxa25x();
+ pxa_init_irq_common(NULL, irq_nr, fn);
+}
+
+#ifdef CONFIG_PM
+static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
+static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
+
+static int pxa_irq_suspend(void)
+{
+ int i;
+
+ for (i = 0; i < DIV_ROUND_UP(pxa_internal_irq_nr, 32); i++) {
+ void __iomem *base = irq_base(i);
+
+ saved_icmr[i] = __raw_readl(base + ICMR);
+ __raw_writel(0, base + ICMR);
+ }
+
+ if (cpu_has_ipr) {
+ for (i = 0; i < pxa_internal_irq_nr; i++)
+ saved_ipr[i] = __raw_readl(pxa_irq_base + IPR(i));
+ }
+
+ return 0;
+}
+
+static void pxa_irq_resume(void)
+{
+ int i;
+
+ for (i = 0; i < DIV_ROUND_UP(pxa_internal_irq_nr, 32); i++) {
+ void __iomem *base = irq_base(i);
+
+ __raw_writel(saved_icmr[i], base + ICMR);
+ __raw_writel(0, base + ICLR);
+ }
+
+ if (cpu_has_ipr)
+ for (i = 0; i < pxa_internal_irq_nr; i++)
+ __raw_writel(saved_ipr[i], pxa_irq_base + IPR(i));
+
+ __raw_writel(1, pxa_irq_base + ICCR);
+}
+#else
+#define pxa_irq_suspend NULL
+#define pxa_irq_resume NULL
+#endif
+
+struct syscore_ops pxa_irq_syscore_ops = {
+ .suspend = pxa_irq_suspend,
+ .resume = pxa_irq_resume,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id intc_ids[] __initconst = {
+ { .compatible = "marvell,pxa-intc", },
+ {}
+};
+
+void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int))
+{
+ struct device_node *node;
+ struct resource res;
+ int ret;
+
+ node = of_find_matching_node(NULL, intc_ids);
+ if (!node) {
+ pr_err("Failed to find interrupt controller in arch-pxa\n");
+ return;
+ }
+
+ ret = of_property_read_u32(node, "marvell,intc-nr-irqs",
+ &pxa_internal_irq_nr);
+ if (ret) {
+ pr_err("Not found marvell,intc-nr-irqs property\n");
+ return;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret < 0) {
+ pr_err("No registers defined for node\n");
+ return;
+ }
+ pxa_irq_base = io_p2v(res.start);
+
+ if (of_find_property(node, "marvell,intc-priority", NULL))
+ cpu_has_ipr = 1;
+
+ ret = irq_alloc_descs(-1, 0, pxa_internal_irq_nr, 0);
+ if (ret < 0) {
+ pr_err("Failed to allocate IRQ numbers\n");
+ return;
+ }
+
+ pxa_init_irq_common(node, pxa_internal_irq_nr, fn);
+}
+#endif /* CONFIG_OF */
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
new file mode 100644
index 0000000..9e132b3
--- /dev/null
+++ b/arch/arm/mach-pxa/littleton.c
@@ -0,0 +1,452 @@
+/*
+ * linux/arch/arm/mach-pxa/littleton.c
+ *
+ * Support for the Marvell Littleton Development Platform.
+ *
+ * Author: Jason Chagas (largely modified code)
+ * Created: Nov 20, 2006
+ * Copyright: (C) Copyright 2006 Marvell International Ltd.
+ *
+ * 2007-11-22 modified to align with latest kernel
+ * eric miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/smc91x.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mfd/da903x.h>
+#include <linux/platform_data/max732x.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "pxa300.h"
+#include "devices.h"
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include "littleton.h"
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+
+#include "generic.h"
+
+#define GPIO_MMC1_CARD_DETECT mfp_to_gpio(MFP_PIN_GPIO15)
+
+/* Littleton MFP configurations */
+static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+
+ /* SSP2 */
+ GPIO25_SSP2_SCLK,
+ GPIO27_SSP2_TXD,
+ GPIO17_GPIO, /* SFRM as chip-select */
+
+ /* Debug Ethernet */
+ GPIO90_GPIO,
+
+ /* Keypad */
+ GPIO107_KP_DKIN_0,
+ GPIO108_KP_DKIN_1,
+ GPIO115_KP_MKIN_0,
+ GPIO116_KP_MKIN_1,
+ GPIO117_KP_MKIN_2,
+ GPIO118_KP_MKIN_3,
+ GPIO119_KP_MKIN_4,
+ GPIO120_KP_MKIN_5,
+ GPIO121_KP_MKOUT_0,
+ GPIO122_KP_MKOUT_1,
+ GPIO123_KP_MKOUT_2,
+ GPIO124_KP_MKOUT_3,
+ GPIO125_KP_MKOUT_4,
+
+ /* MMC1 */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD,
+ GPIO15_GPIO, /* card detect */
+
+ /* UART3 */
+ GPIO107_UART3_CTS,
+ GPIO108_UART3_RTS,
+ GPIO109_UART3_TXD,
+ GPIO110_UART3_RXD,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = (LITTLETON_ETH_PHYS + 0x300),
+ .end = (LITTLETON_ETH_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ }
+};
+
+static struct smc91x_platdata littleton_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+ SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &littleton_smc91x_info,
+ },
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
+ [0] = {
+ /* VGA */
+ .pixclock = 38250,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 24,
+ .vsync_len = 2,
+ .upper_margin = 2,
+ .lower_margin = 4,
+ .sync = 0,
+ },
+ [1] = {
+ /* QVGA */
+ .pixclock = 153000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 88,
+ .vsync_len = 2,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info littleton_lcd_info = {
+ .modes = tpo_tdo24mtea1_modes,
+ .num_modes = 2,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+};
+
+static void littleton_init_lcd(void)
+{
+ pxa_set_fb_info(NULL, &littleton_lcd_info);
+}
+#else
+static inline void littleton_init_lcd(void) {};
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master littleton_spi_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .gpio_cs = LITTLETON_GPIO_LCD_CS,
+};
+
+static struct spi_board_info littleton_spi_devices[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = 2,
+ .chip_select = 0,
+ .controller_data= &littleton_tdo24m_chip,
+ },
+};
+
+static void __init littleton_init_spi(void)
+{
+ pxa2xx_set_spi_info(2, &littleton_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
+}
+#else
+static inline void littleton_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int littleton_matrix_key_map[] = {
+ /* KEY(row, col, key_code) */
+ KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
+ KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
+ KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
+
+ KEY(0, 3, KEY_KPASTERISK), /* * */
+ KEY(2, 3, KEY_KPDOT), /* # */
+
+ KEY(5, 4, KEY_ENTER),
+
+ KEY(5, 0, KEY_UP),
+ KEY(5, 1, KEY_DOWN),
+ KEY(5, 2, KEY_LEFT),
+ KEY(5, 3, KEY_RIGHT),
+ KEY(3, 2, KEY_HOME),
+ KEY(4, 1, KEY_END),
+ KEY(3, 3, KEY_BACK),
+
+ KEY(4, 0, KEY_SEND),
+ KEY(4, 2, KEY_VOLUMEUP),
+ KEY(4, 3, KEY_VOLUMEDOWN),
+
+ KEY(3, 0, KEY_F22), /* soft1 */
+ KEY(3, 1, KEY_F23), /* soft2 */
+};
+
+static struct matrix_keymap_data littleton_matrix_keymap_data = {
+ .keymap = littleton_matrix_key_map,
+ .keymap_size = ARRAY_SIZE(littleton_matrix_key_map),
+};
+
+static struct pxa27x_keypad_platform_data littleton_keypad_info = {
+ .matrix_key_rows = 6,
+ .matrix_key_cols = 5,
+ .matrix_keymap_data = &littleton_matrix_keymap_data,
+
+ .enable_rotary0 = 1,
+ .rotary0_up_key = KEY_UP,
+ .rotary0_down_key = KEY_DOWN,
+
+ .debounce_interval = 30,
+};
+static void __init littleton_init_keypad(void)
+{
+ pxa_set_keypad_info(&littleton_keypad_info);
+}
+#else
+static inline void littleton_init_keypad(void) {}
+#endif
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data littleton_mci_platform_data = {
+ .detect_delay_ms = 200,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_MMC1_CARD_DETECT,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+static void __init littleton_init_mmc(void)
+{
+ pxa_set_mci_info(&littleton_mci_platform_data);
+}
+#else
+static inline void littleton_init_mmc(void) {}
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
+static struct mtd_partition littleton_nand_partitions[] = {
+ [0] = {
+ .name = "Bootloader",
+ .offset = 0,
+ .size = 0x060000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [1] = {
+ .name = "Kernel",
+ .offset = 0x060000,
+ .size = 0x200000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [2] = {
+ .name = "Filesystem",
+ .offset = 0x0260000,
+ .size = 0x3000000, /* 48M - rootfs */
+ },
+ [3] = {
+ .name = "MassStorage",
+ .offset = 0x3260000,
+ .size = 0x3d40000,
+ },
+ [4] = {
+ .name = "BBT",
+ .offset = 0x6FA0000,
+ .size = 0x80000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* NOTE: we reserve some blocks at the end of the NAND flash for
+ * bad block management, and the max number of relocation blocks
+ * differs on different platforms. Please take care with it when
+ * defining the partition table.
+ */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+ .parts = littleton_nand_partitions,
+ .nr_parts = ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+ pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
+
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct led_info littleton_da9034_leds[] = {
+ [0] = {
+ .name = "littleton:keypad1",
+ .flags = DA9034_LED_RAMP,
+ },
+ [1] = {
+ .name = "littleton:keypad2",
+ .flags = DA9034_LED_RAMP,
+ },
+ [2] = {
+ .name = "littleton:vibra",
+ .flags = 0,
+ },
+};
+
+static struct da9034_touch_pdata littleton_da9034_touch = {
+ .x_inverted = 1,
+ .interval_ms = 20,
+};
+
+static struct da903x_subdev_info littleton_da9034_subdevs[] = {
+ {
+ .name = "da903x-led",
+ .id = DA9034_ID_LED_1,
+ .platform_data = &littleton_da9034_leds[0],
+ }, {
+ .name = "da903x-led",
+ .id = DA9034_ID_LED_2,
+ .platform_data = &littleton_da9034_leds[1],
+ }, {
+ .name = "da903x-led",
+ .id = DA9034_ID_VIBRA,
+ .platform_data = &littleton_da9034_leds[2],
+ }, {
+ .name = "da903x-backlight",
+ .id = DA9034_ID_WLED,
+ }, {
+ .name = "da9034-touch",
+ .id = DA9034_ID_TOUCH,
+ .platform_data = &littleton_da9034_touch,
+ },
+};
+
+static struct da903x_platform_data littleton_da9034_info = {
+ .num_subdevs = ARRAY_SIZE(littleton_da9034_subdevs),
+ .subdevs = littleton_da9034_subdevs,
+};
+
+static struct max732x_platform_data littleton_max7320_info = {
+ .gpio_base = EXT0_GPIO_BASE,
+};
+
+static struct i2c_board_info littleton_i2c_info[] = {
+ [0] = {
+ .type = "da9034",
+ .addr = 0x34,
+ .platform_data = &littleton_da9034_info,
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
+ },
+ [1] = {
+ .type = "max7320",
+ .addr = 0x50,
+ .platform_data = &littleton_max7320_info,
+ },
+};
+
+static void __init littleton_init_i2c(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(littleton_i2c_info));
+}
+#else
+static inline void littleton_init_i2c(void) {}
+#endif /* CONFIG_I2C_PXA || CONFIG_I2C_PXA_MODULE */
+
+static void __init littleton_init(void)
+{
+ /* initialize MFP configurations */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ /*
+ * Note: we depend bootloader set the correct
+ * value to MSC register for SMC91x.
+ */
+ platform_device_register(&smc91x_device);
+
+ littleton_init_spi();
+ littleton_init_i2c();
+ littleton_init_mmc();
+ littleton_init_lcd();
+ littleton_init_keypad();
+ littleton_init_nand();
+}
+
+MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
+ .atag_offset = 0x100,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = LITTLETON_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = littleton_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/littleton.h b/arch/arm/mach-pxa/littleton.h
new file mode 100644
index 0000000..a0a8d2b
--- /dev/null
+++ b/arch/arm/mach-pxa/littleton.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_LITTLETON_H
+#define __ASM_ARCH_LITTLETON_H
+
+#define LITTLETON_ETH_PHYS 0x30000000
+
+#define LITTLETON_GPIO_LCD_CS (17)
+
+#define EXT0_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
+#define EXT0_GPIO(x) (EXT0_GPIO_BASE + (x))
+
+#define LITTLETON_NR_IRQS (IRQ_BOARD_START + 8)
+
+#endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
new file mode 100644
index 0000000..e9f401b
--- /dev/null
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -0,0 +1,522 @@
+/*
+ * linux/arch/arm/mach-pxa/lpd270.c
+ *
+ * Support for the LogicPD PXA270 Card Engine.
+ * Derived from the mainstone code, which carries these notices:
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 05, 2002
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include "pxa27x.h"
+#include "lpd270.h"
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long lpd270_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO15_nCS_1, /* Mainboard Flash */
+ GPIO78_nCS_2, /* CPLD + Ethernet */
+
+ /* LCD - 16bpp Active TFT */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+ GPIO16_PWM0_OUT, /* Backlight */
+
+ /* USB Host */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO45_AC97_SYSCLK,
+
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
+
+static unsigned int lpd270_irq_enabled;
+
+static void lpd270_mask_irq(struct irq_data *d)
+{
+ int lpd270_irq = d->irq - LPD270_IRQ(0);
+
+ __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
+
+ lpd270_irq_enabled &= ~(1 << lpd270_irq);
+ __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static void lpd270_unmask_irq(struct irq_data *d)
+{
+ int lpd270_irq = d->irq - LPD270_IRQ(0);
+
+ lpd270_irq_enabled |= 1 << lpd270_irq;
+ __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static struct irq_chip lpd270_irq_chip = {
+ .name = "CPLD",
+ .irq_ack = lpd270_mask_irq,
+ .irq_mask = lpd270_mask_irq,
+ .irq_unmask = lpd270_unmask_irq,
+};
+
+static void lpd270_irq_handler(struct irq_desc *desc)
+{
+ unsigned int irq;
+ unsigned long pending;
+
+ pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
+ do {
+ /* clear useless edge notification */
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+ if (likely(pending)) {
+ irq = LPD270_IRQ(0) + __ffs(pending);
+ generic_handle_irq(irq);
+
+ pending = __raw_readw(LPD270_INT_STATUS) &
+ lpd270_irq_enabled;
+ }
+ } while (pending);
+}
+
+static void __init lpd270_init_irq(void)
+{
+ int irq;
+
+ pxa27x_init_irq();
+
+ __raw_writew(0, LPD270_INT_MASK);
+ __raw_writew(0, LPD270_INT_STATUS);
+
+ /* setup extra LogicPD PXA270 irqs */
+ for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
+ irq_set_chip_and_handler(irq, &lpd270_irq_chip,
+ handle_level_irq);
+ irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+ }
+ irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
+}
+
+
+#ifdef CONFIG_PM
+static void lpd270_irq_resume(void)
+{
+ __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static struct syscore_ops lpd270_irq_syscore_ops = {
+ .resume = lpd270_irq_resume,
+};
+
+static int __init lpd270_irq_device_init(void)
+{
+ if (machine_is_logicpd_pxa270()) {
+ register_syscore_ops(&lpd270_irq_syscore_ops);
+ return 0;
+ }
+ return -ENODEV;
+}
+
+device_initcall(lpd270_irq_device_init);
+#endif
+
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = LPD270_ETH_PHYS,
+ .end = (LPD270_ETH_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LPD270_ETHERNET_IRQ,
+ .end = LPD270_ETHERNET_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+struct smc91x_platdata smc91x_platdata = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev.platform_data = &smc91x_platdata,
+};
+
+static struct resource lpd270_flash_resources[] = {
+ [0] = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition lpd270_flash0_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Kernel",
+ .size = 0x00400000,
+ .offset = 0x00040000,
+ }, {
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00440000
+ },
+};
+
+static struct flash_platform_data lpd270_flash_data[2] = {
+ {
+ .name = "processor-flash",
+ .map_name = "cfi_probe",
+ .parts = lpd270_flash0_partitions,
+ .nr_parts = ARRAY_SIZE(lpd270_flash0_partitions),
+ }, {
+ .name = "mainboard-flash",
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ }
+};
+
+static struct platform_device lpd270_flash_device[2] = {
+ {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &lpd270_flash_data[0],
+ },
+ .resource = &lpd270_flash_resources[0],
+ .num_resources = 1,
+ }, {
+ .name = "pxa2xx-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &lpd270_flash_data[1],
+ },
+ .resource = &lpd270_flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
+static struct pwm_lookup lpd270_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data lpd270_backlight_data = {
+ .max_brightness = 1,
+ .dft_brightness = 1,
+ .enable_gpio = -1,
+};
+
+static struct platform_device lpd270_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &lpd270_backlight_data,
+ },
+};
+
+/* 5.7" TFT QVGA (LoLo display number 1) */
+static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
+ .pixclock = 150000,
+ .xres = 320,
+ .yres = 240,
+ .bpp = 16,
+ .hsync_len = 0x14,
+ .left_margin = 0x28,
+ .right_margin = 0x0a,
+ .vsync_len = 0x02,
+ .upper_margin = 0x08,
+ .lower_margin = 0x14,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq057q3dc02 = {
+ .modes = &sharp_lq057q3dc02_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
+};
+
+/* 12.1" TFT SVGA (LoLo display number 2) */
+static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
+ .pixclock = 50000,
+ .xres = 800,
+ .yres = 600,
+ .bpp = 16,
+ .hsync_len = 0x05,
+ .left_margin = 0x52,
+ .right_margin = 0x05,
+ .vsync_len = 0x04,
+ .upper_margin = 0x14,
+ .lower_margin = 0x0a,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq121s1dg31 = {
+ .modes = &sharp_lq121s1dg31_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
+};
+
+/* 3.6" TFT QVGA (LoLo display number 3) */
+static struct pxafb_mode_info sharp_lq036q1da01_mode = {
+ .pixclock = 150000,
+ .xres = 320,
+ .yres = 240,
+ .bpp = 16,
+ .hsync_len = 0x0e,
+ .left_margin = 0x04,
+ .right_margin = 0x0a,
+ .vsync_len = 0x03,
+ .upper_margin = 0x03,
+ .lower_margin = 0x03,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq036q1da01 = {
+ .modes = &sharp_lq036q1da01_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
+};
+
+/* 6.4" TFT VGA (LoLo display number 5) */
+static struct pxafb_mode_info sharp_lq64d343_mode = {
+ .pixclock = 25000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 0x31,
+ .left_margin = 0x89,
+ .right_margin = 0x19,
+ .vsync_len = 0x12,
+ .upper_margin = 0x22,
+ .lower_margin = 0x00,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq64d343 = {
+ .modes = &sharp_lq64d343_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
+};
+
+/* 10.4" TFT VGA (LoLo display number 7) */
+static struct pxafb_mode_info sharp_lq10d368_mode = {
+ .pixclock = 25000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 0x31,
+ .left_margin = 0x89,
+ .right_margin = 0x19,
+ .vsync_len = 0x12,
+ .upper_margin = 0x22,
+ .lower_margin = 0x00,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq10d368 = {
+ .modes = &sharp_lq10d368_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
+};
+
+/* 3.5" TFT QVGA (LoLo display number 8) */
+static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
+ .pixclock = 150000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 0x0e,
+ .left_margin = 0x0a,
+ .right_margin = 0x0a,
+ .vsync_len = 0x03,
+ .upper_margin = 0x05,
+ .lower_margin = 0x14,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq035q7db02_20 = {
+ .modes = &sharp_lq035q7db02_20_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
+};
+
+static struct pxafb_mach_info *lpd270_lcd_to_use;
+
+static int __init lpd270_set_lcd(char *str)
+{
+ if (!strncasecmp(str, "lq057q3dc02", 11)) {
+ lpd270_lcd_to_use = &sharp_lq057q3dc02;
+ } else if (!strncasecmp(str, "lq121s1dg31", 11)) {
+ lpd270_lcd_to_use = &sharp_lq121s1dg31;
+ } else if (!strncasecmp(str, "lq036q1da01", 11)) {
+ lpd270_lcd_to_use = &sharp_lq036q1da01;
+ } else if (!strncasecmp(str, "lq64d343", 8)) {
+ lpd270_lcd_to_use = &sharp_lq64d343;
+ } else if (!strncasecmp(str, "lq10d368", 8)) {
+ lpd270_lcd_to_use = &sharp_lq10d368;
+ } else if (!strncasecmp(str, "lq035q7db02-20", 14)) {
+ lpd270_lcd_to_use = &sharp_lq035q7db02_20;
+ } else {
+ printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
+ }
+
+ return 1;
+}
+
+__setup("lcd=", lpd270_set_lcd);
+
+static struct platform_device *platform_devices[] __initdata = {
+ &smc91x_device,
+ &lpd270_backlight_device,
+ &lpd270_flash_device[0],
+ &lpd270_flash_device[1],
+};
+
+static struct pxaohci_platform_data lpd270_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init lpd270_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
+ lpd270_flash_data[1].width = 4;
+
+ /*
+ * System bus arbiter setting:
+ * - Core_Park
+ * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+ */
+ ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+ pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+ pxa_set_ac97_info(NULL);
+
+ if (lpd270_lcd_to_use != NULL)
+ pxa_set_fb_info(NULL, lpd270_lcd_to_use);
+
+ pxa_set_ohci_info(&lpd270_ohci_platform_data);
+}
+
+
+static struct map_desc lpd270_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long)LPD270_CPLD_VIRT,
+ .pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
+ .length = LPD270_CPLD_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init lpd270_map_io(void)
+{
+ pxa27x_map_io();
+ iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
+
+ /* for use I SRAM as framebuffer. */
+ PSLR |= 0x00000F04;
+ PCFR = 0x00000066;
+}
+
+MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
+ /* Maintainer: Peter Barada */
+ .atag_offset = 0x100,
+ .map_io = lpd270_map_io,
+ .nr_irqs = LPD270_NR_IRQS,
+ .init_irq = lpd270_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = lpd270_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.h b/arch/arm/mach-pxa/lpd270.h
new file mode 100644
index 0000000..4edc712
--- /dev/null
+++ b/arch/arm/mach-pxa/lpd270.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-pxa/include/mach/lpd270.h
+ *
+ * Author: Lennert Buytenhek
+ * Created: Feb 10, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_LPD270_H
+#define __ASM_ARCH_LPD270_H
+
+#define LPD270_CPLD_PHYS PXA_CS2_PHYS
+#define LPD270_CPLD_VIRT IOMEM(0xf0000000)
+#define LPD270_CPLD_SIZE 0x00100000
+
+#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000)
+
+/* CPLD registers */
+#define LPD270_CPLD_REG(x) (LPD270_CPLD_VIRT + (x))
+#define LPD270_CONTROL LPD270_CPLD_REG(0x00)
+#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04)
+#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08)
+#define LPD270_CPLD_REVISION LPD270_CPLD_REG(0x14)
+#define LPD270_EEPROM_SPI_ITF LPD270_CPLD_REG(0x20)
+#define LPD270_MODE_PINS LPD270_CPLD_REG(0x24)
+#define LPD270_EGPIO LPD270_CPLD_REG(0x30)
+#define LPD270_INT_MASK LPD270_CPLD_REG(0x40)
+#define LPD270_INT_STATUS LPD270_CPLD_REG(0x50)
+
+#define LPD270_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */
+#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */
+#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */
+
+#define LPD270_IRQ(x) (IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ LPD270_IRQ(3)
+#define LPD270_AC97_IRQ LPD270_IRQ(4)
+#define LPD270_NR_IRQS (IRQ_BOARD_START + 5)
+
+#endif
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
new file mode 100644
index 0000000..fe2ef9b
--- /dev/null
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -0,0 +1,628 @@
+/*
+ * linux/arch/arm/mach-pxa/lubbock.c
+ *
+ * Support for the Intel DBPXA250 Development Platform.
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clkdev.h>
+#include <linux/gpio.h>
+#include <linux/gpio/gpio-reg.h>
+#include <linux/gpio/machine.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/major.h>
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/hardware/sa1111.h>
+
+#include "pxa25x.h"
+#include <mach/audio.h>
+#include <mach/lubbock.h>
+#include "udc.h"
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include "pm.h"
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long lubbock_pin_config[] __initdata = {
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO78_nCS_2, /* CS2 - Baseboard FGPA */
+ GPIO79_nCS_3, /* CS3 - SMC ethernet */
+ GPIO80_nCS_4, /* CS4 - SA1111 */
+
+ /* SSP data pins */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* LCD - 16bpp DSTN */
+ GPIOxx_LCD_DSTN_16BPP,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+
+ /* SA1111 chip */
+ GPIO11_3_6MHz,
+
+ /* wakeup */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
+
+void lubbock_set_hexled(uint32_t value)
+{
+ LUB_HEXLED = value;
+}
+
+static struct gpio_chip *lubbock_misc_wr_gc;
+
+void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
+{
+ unsigned long m = mask, v = set;
+ lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v);
+}
+EXPORT_SYMBOL(lubbock_set_misc_wr);
+
+static int lubbock_udc_is_connected(void)
+{
+ return (LUB_MISC_RD & (1 << 9)) == 0;
+}
+
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+ .udc_is_connected = lubbock_udc_is_connected,
+ // no D+ pullup; lubbock can't connect/disconnect in software
+};
+
+static void lubbock_init_pcmcia(void)
+{
+ struct clk *clk;
+
+ /* Add an alias for the SA1111 PCMCIA clock */
+ clk = clk_get_sys("pxa2xx-pcmcia", NULL);
+ if (!IS_ERR(clk)) {
+ clkdev_create(clk, NULL, "1800");
+ clk_put(clk);
+ }
+}
+
+static struct resource sa1111_resources[] = {
+ [0] = {
+ .start = 0x10000000,
+ .end = 0x10001fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LUBBOCK_SA1111_IRQ,
+ .end = LUBBOCK_SA1111_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sa1111_platform_data sa1111_info = {
+ .irq_base = LUBBOCK_SA1111_IRQ_BASE,
+ .disable_devs = SA1111_DEVID_SAC,
+};
+
+static struct platform_device sa1111_device = {
+ .name = "sa1111",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sa1111_resources),
+ .resource = sa1111_resources,
+ .dev = {
+ .platform_data = &sa1111_info,
+ },
+};
+
+/* ADS7846 is connected through SSP ... and if your board has J5 populated,
+ * you can select it to replace the ucb1400 by switching the touchscreen cable
+ * (to J5) and poking board registers (as done below). Else it's only useful
+ * for the temperature sensors.
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+ .num_chipselect = 1,
+};
+
+static int lubbock_ads7846_pendown_state(void)
+{
+ /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
+ return 0;
+}
+
+static struct ads7846_platform_data ads_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100, /* internal, no cap */
+ .get_pendown_state = lubbock_ads7846_pendown_state,
+ // .x_plate_ohms = 500, /* GUESS! */
+ // .y_plate_ohms = 500, /* GUESS! */
+};
+
+static void ads7846_cs(u32 command)
+{
+ static const unsigned TS_nCS = 1 << 11;
+ lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
+}
+
+static struct pxa2xx_spi_chip ads_hw = {
+ .tx_threshold = 1,
+ .rx_threshold = 2,
+ .cs_control = ads7846_cs,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = { {
+ .modalias = "ads7846",
+ .platform_data = &ads_info,
+ .controller_data = &ads_hw,
+ .irq = LUBBOCK_BB_IRQ,
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
+ .bus_num = 1,
+ .chip_select = 0,
+},
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = 0x0c000c00,
+ .end = 0x0c0fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LUBBOCK_ETH_IRQ,
+ .end = LUBBOCK_ETH_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+ [2] = {
+ .name = "smc91x-attrib",
+ .start = 0x0e000000,
+ .end = 0x0e0fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct smc91x_platdata lubbock_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &lubbock_smc91x_info,
+ },
+};
+
+static struct resource flash_resources[] = {
+ [0] = {
+ .start = 0x00000000,
+ .end = SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x04000000,
+ .end = 0x04000000 + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition lubbock_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },{
+ .name = "Kernel",
+ .size = 0x00100000,
+ .offset = 0x00040000,
+ },{
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00140000
+ }
+};
+
+static struct flash_platform_data lubbock_flash_data[2] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = lubbock_partitions,
+ .nr_parts = ARRAY_SIZE(lubbock_partitions),
+ }, {
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ }
+};
+
+static struct platform_device lubbock_flash_device[2] = {
+ {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &lubbock_flash_data[0],
+ },
+ .resource = &flash_resources[0],
+ .num_resources = 1,
+ },
+ {
+ .name = "pxa2xx-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &lubbock_flash_data[1],
+ },
+ .resource = &flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
+static struct resource lubbock_cplds_resources[] = {
+ [0] = {
+ .start = LUBBOCK_FPGA_PHYS + 0xc0,
+ .end = LUBBOCK_FPGA_PHYS + 0xe0 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(0),
+ .end = PXA_GPIO_TO_IRQ(0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+ [2] = {
+ .start = LUBBOCK_IRQ(0),
+ .end = LUBBOCK_IRQ(6),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lubbock_cplds_device = {
+ .name = "pxa_cplds_irqs",
+ .id = -1,
+ .resource = &lubbock_cplds_resources[0],
+ .num_resources = 3,
+};
+
+
+static struct platform_device *devices[] __initdata = {
+ &sa1111_device,
+ &smc91x_device,
+ &lubbock_flash_device[0],
+ &lubbock_flash_device[1],
+ &lubbock_cplds_device,
+};
+
+static struct pxafb_mode_info sharp_lm8v31_mode = {
+ .pixclock = 270000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 3,
+ .right_margin = 3,
+ .vsync_len = 1,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info sharp_lm8v31 = {
+ .modes = &sharp_lm8v31_mode,
+ .num_modes = 1,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_AC_BIAS_FREQ(255),
+};
+
+#define MMC_POLL_RATE msecs_to_jiffies(1000)
+
+static irq_handler_t mmc_detect_int;
+static void *mmc_detect_int_data;
+static struct timer_list mmc_timer;
+
+static void lubbock_mmc_poll(struct timer_list *unused)
+{
+ unsigned long flags;
+
+ /* clear any previous irq state, then ... */
+ local_irq_save(flags);
+ LUB_IRQ_SET_CLR &= ~(1 << 0);
+ local_irq_restore(flags);
+
+ /* poll until mmc/sd card is removed */
+ if (LUB_IRQ_SET_CLR & (1 << 0))
+ mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
+ else {
+ (void) mmc_detect_int(LUBBOCK_SD_IRQ, mmc_detect_int_data);
+ enable_irq(LUBBOCK_SD_IRQ);
+ }
+}
+
+static irqreturn_t lubbock_detect_int(int irq, void *data)
+{
+ /* IRQ is level triggered; disable, and poll for removal */
+ disable_irq(irq);
+ mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
+
+ return mmc_detect_int(irq, data);
+}
+
+static int lubbock_mci_init(struct device *dev,
+ irq_handler_t detect_int,
+ void *data)
+{
+ /* detect card insert/eject */
+ mmc_detect_int = detect_int;
+ mmc_detect_int_data = data;
+ timer_setup(&mmc_timer, lubbock_mmc_poll, 0);
+ return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
+ 0, "lubbock-sd-detect", data);
+}
+
+static int lubbock_mci_get_ro(struct device *dev)
+{
+ return (LUB_MISC_RD & (1 << 2)) != 0;
+}
+
+static void lubbock_mci_exit(struct device *dev, void *data)
+{
+ free_irq(LUBBOCK_SD_IRQ, data);
+ del_timer_sync(&mmc_timer);
+}
+
+static struct pxamci_platform_data lubbock_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .detect_delay_ms = 10,
+ .init = lubbock_mci_init,
+ .get_ro = lubbock_mci_get_ro,
+ .exit = lubbock_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (mode & IR_SIRMODE) {
+ lubbock_set_misc_wr(BIT(4), 0);
+ } else if (mode & IR_FIRMODE) {
+ lubbock_set_misc_wr(BIT(4), BIT(4));
+ }
+ pxa2xx_transceiver_mode(dev, mode);
+ local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data lubbock_ficp_platform_data = {
+ .gpio_pwdown = -1,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
+ .transceiver_mode = lubbock_irda_transceiver_mode,
+};
+
+static void __init lubbock_init(void)
+{
+ int flashboot = (LUB_CONF_SWITCHES & 1);
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
+
+ lubbock_misc_wr_gc = gpio_reg_init(NULL, (void *)&LUB_MISC_WR,
+ -1, 16, "lubbock", 0, LUB_MISC_WR,
+ NULL, NULL, NULL);
+ if (IS_ERR(lubbock_misc_wr_gc)) {
+ pr_err("Lubbock: unable to register lubbock GPIOs: %ld\n",
+ PTR_ERR(lubbock_misc_wr_gc));
+ lubbock_misc_wr_gc = NULL;
+ }
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ lubbock_init_pcmcia();
+
+ clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
+ pxa_set_udc_info(&udc_info);
+ pxa_set_fb_info(NULL, &sharp_lm8v31);
+ pxa_set_mci_info(&lubbock_mci_platform_data);
+ pxa_set_ficp_info(&lubbock_ficp_platform_data);
+ pxa_set_ac97_info(NULL);
+
+ lubbock_flash_data[0].width = lubbock_flash_data[1].width =
+ (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
+ /* Compensate for the nROMBT switch which swaps the flash banks */
+ printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
+ flashboot?"Flash":"ROM", flashboot);
+
+ lubbock_flash_data[flashboot^1].name = "application-flash";
+ lubbock_flash_data[flashboot].name = "boot-rom";
+ (void) platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+}
+
+static struct map_desc lubbock_io_desc[] __initdata = {
+ { /* CPLD */
+ .virtual = LUBBOCK_FPGA_VIRT,
+ .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init lubbock_map_io(void)
+{
+ pxa25x_map_io();
+ iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
+
+ PCFR |= PCFR_OPDE;
+}
+
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct lubbock_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} lubbock_leds[] = {
+ { "lubbock:D28", "default-on", },
+ { "lubbock:D27", "cpu0", },
+ { "lubbock:D26", "heartbeat" },
+ { "lubbock:D25", },
+ { "lubbock:D24", },
+ { "lubbock:D23", },
+ { "lubbock:D22", },
+ { "lubbock:D21", },
+};
+
+static void lubbock_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct lubbock_led *led = container_of(cdev,
+ struct lubbock_led, cdev);
+ u32 reg = LUB_DISC_BLNK_LED;
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+
+ LUB_DISC_BLNK_LED = reg;
+}
+
+static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
+{
+ struct lubbock_led *led = container_of(cdev,
+ struct lubbock_led, cdev);
+ u32 reg = LUB_DISC_BLNK_LED;
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init lubbock_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_lubbock())
+ return -ENODEV;
+
+ /* All ON */
+ LUB_DISC_BLNK_LED |= 0xff;
+ for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
+ struct lubbock_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = lubbock_leds[i].name;
+ led->cdev.brightness_set = lubbock_led_set;
+ led->cdev.brightness_get = lubbock_led_get;
+ led->cdev.default_trigger = lubbock_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(lubbock_leds_init);
+#endif
+
+MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
+ /* Maintainer: MontaVista Software Inc. */
+ .map_io = lubbock_map_io,
+ .nr_irqs = LUBBOCK_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = lubbock_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
new file mode 100644
index 0000000..c5325d1
--- /dev/null
+++ b/arch/arm/mach-pxa/magician.c
@@ -0,0 +1,1022 @@
+/*
+ * Support for HTC Magician PDA phones:
+ * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110
+ * and T-Mobile MDA Compact.
+ *
+ * Copyright (c) 2006-2007 Philipp Zabel
+ *
+ * Based on hx4700.c, spitz.c and others.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mfd/htc-pasic3.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pda_power.h>
+#include <linux/platform_data/gpio-htc-egpio.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/gpio-regulator.h>
+#include <linux/regulator/machine.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/system_info.h>
+
+#include "pxa27x.h"
+#include <mach/magician.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+
+#include <linux/regulator/max1586.h>
+
+#include <linux/platform_data/pxa2xx_udc.h>
+
+#include "udc.h"
+#include "pxa27x-udc.h"
+#include "devices.h"
+#include "generic.h"
+
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/spi/ads7846.h>
+
+static unsigned long magician_pin_config[] __initdata = {
+
+ /* SDRAM and Static Memory I/O Signals */
+ GPIO20_nSDCS_2,
+ GPIO21_nSDCS_3,
+ GPIO15_nCS_1,
+ GPIO78_nCS_2, /* PASIC3 */
+ GPIO79_nCS_3, /* EGPIO CPLD */
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+
+ /* I2C UDA1380 + OV9640 */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* PWM 0 - LCD backlight */
+ GPIO16_PWM0_OUT,
+
+ /* I2S UDA1380 capture */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO31_I2S_SYNC,
+ GPIO113_I2S_SYSCLK,
+
+ /* SSP 1 UDA1380 playback */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+
+ /* SSP 2 TSC2046 touchscreen */
+ GPIO19_SSP2_SCLK,
+ MFP_CFG_OUT(GPIO14, AF0, DRIVE_HIGH), /* frame as GPIO */
+ GPIO89_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+
+ /* MMC/SD/SDHC slot */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* QCI camera interface */
+ GPIO12_CIF_DD_7,
+ GPIO17_CIF_DD_6,
+ GPIO50_CIF_DD_3,
+ GPIO51_CIF_DD_2,
+ GPIO52_CIF_DD_4,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO55_CIF_DD_1,
+ GPIO81_CIF_DD_0,
+ GPIO82_CIF_DD_5,
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+
+ /* Magician specific input GPIOs */
+ GPIO9_GPIO, /* unknown */
+ GPIO10_GPIO, /* GSM_IRQ */
+ GPIO13_GPIO, /* CPLD_IRQ */
+ GPIO107_GPIO, /* DS1WM_IRQ */
+ GPIO108_GPIO, /* GSM_READY */
+ GPIO115_GPIO, /* nPEN_IRQ */
+};
+
+/*
+ * IrDA
+ */
+
+static struct pxaficp_platform_data magician_ficp_info = {
+ .gpio_pwdown = GPIO83_MAGICIAN_nIR_EN,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .gpio_pwdown_inverted = 0,
+};
+
+/*
+ * GPIO Keys
+ */
+
+#define INIT_KEY(_code, _gpio, _desc) \
+ { \
+ .code = KEY_##_code, \
+ .gpio = _gpio, \
+ .desc = _desc, \
+ .type = EV_KEY, \
+ .wakeup = 1, \
+ }
+
+static struct gpio_keys_button magician_button_table[] = {
+ INIT_KEY(POWER, GPIO0_MAGICIAN_KEY_POWER, "Power button"),
+ INIT_KEY(ESC, GPIO37_MAGICIAN_KEY_HANGUP, "Hangup button"),
+ INIT_KEY(F10, GPIO38_MAGICIAN_KEY_CONTACTS, "Contacts button"),
+ INIT_KEY(CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, "Calendar button"),
+ INIT_KEY(CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, "Camera button"),
+ INIT_KEY(UP, GPIO93_MAGICIAN_KEY_UP, "Up button"),
+ INIT_KEY(DOWN, GPIO94_MAGICIAN_KEY_DOWN, "Down button"),
+ INIT_KEY(LEFT, GPIO95_MAGICIAN_KEY_LEFT, "Left button"),
+ INIT_KEY(RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, "Right button"),
+ INIT_KEY(KPENTER, GPIO97_MAGICIAN_KEY_ENTER, "Action button"),
+ INIT_KEY(RECORD, GPIO98_MAGICIAN_KEY_RECORD, "Record button"),
+ INIT_KEY(VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, "Volume up"),
+ INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
+ INIT_KEY(PHONE, GPIO102_MAGICIAN_KEY_PHONE, "Phone button"),
+ INIT_KEY(PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, "Headset button"),
+};
+
+static struct gpio_keys_platform_data gpio_keys_data = {
+ .buttons = magician_button_table,
+ .nbuttons = ARRAY_SIZE(magician_button_table),
+};
+
+static struct platform_device gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &gpio_keys_data,
+ },
+ .id = -1,
+};
+
+/*
+ * EGPIO (Xilinx CPLD)
+ *
+ * 32-bit aligned 8-bit registers
+ * 16 possible registers (reg windows size), only 7 used:
+ * 3x output, 1x irq, 3x input
+ */
+
+static struct resource egpio_resources[] = {
+ [0] = {
+ .start = PXA_CS3_PHYS,
+ .end = PXA_CS3_PHYS + 0x20 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+ [0] = {
+ .reg_start = 0,
+ .gpio_base = MAGICIAN_EGPIO(0, 0),
+ .num_gpios = 24,
+ .direction = HTC_EGPIO_OUTPUT,
+ /*
+ * Depends on modules configuration
+ */
+ .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
+ },
+ [1] = {
+ .reg_start = 4,
+ .gpio_base = MAGICIAN_EGPIO(4, 0),
+ .num_gpios = 24,
+ .direction = HTC_EGPIO_INPUT,
+ },
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+ .reg_width = 8,
+ .bus_width = 32,
+ .irq_base = IRQ_BOARD_START,
+ .num_irqs = 4,
+ .ack_register = 3,
+ .chip = egpio_chips,
+ .num_chips = ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device egpio = {
+ .name = "htc-egpio",
+ .id = -1,
+ .resource = egpio_resources,
+ .num_resources = ARRAY_SIZE(egpio_resources),
+ .dev = {
+ .platform_data = &egpio_info,
+ },
+};
+
+/*
+ * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV
+ */
+
+static struct pxafb_mode_info toppoly_modes[] = {
+ {
+ .pixclock = 96153,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 11,
+ .vsync_len = 3,
+ .left_margin = 19,
+ .upper_margin = 2,
+ .right_margin = 10,
+ .lower_margin = 2,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mode_info samsung_modes[] = {
+ {
+ .pixclock = 226469,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 8,
+ .vsync_len = 4,
+ .left_margin = 9,
+ .upper_margin = 4,
+ .right_margin = 9,
+ .lower_margin = 4,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ },
+};
+
+static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+ pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off");
+
+ if (on) {
+ gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
+ udelay(2000);
+ gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
+ udelay(2000);
+ /* FIXME: enable LCDC here */
+ udelay(2000);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
+ udelay(2000);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
+ } else {
+ msleep(15);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
+ udelay(500);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
+ udelay(1000);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
+ gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
+ }
+}
+
+static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+ pr_debug("Samsung LCD power: %s\n", on ? "on" : "off");
+
+ if (on) {
+ if (system_rev < 3)
+ gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
+ else
+ gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
+ mdelay(6);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
+ mdelay(6); /* Avdd -> Voff >5ms */
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
+ mdelay(16); /* Voff -> Von >(5+10)ms */
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
+ } else {
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
+ mdelay(16);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
+ mdelay(6);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
+ mdelay(6);
+ if (system_rev < 3)
+ gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
+ else
+ gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
+ }
+}
+
+static struct pxafb_mach_info toppoly_info = {
+ .modes = toppoly_modes,
+ .num_modes = 1,
+ .fixed_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+ .pxafb_lcd_power = toppoly_lcd_power,
+};
+
+static struct pxafb_mach_info samsung_info = {
+ .modes = samsung_modes,
+ .num_modes = 1,
+ .fixed_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
+ .pxafb_lcd_power = samsung_lcd_power,
+};
+
+/*
+ * Backlight
+ */
+
+static struct pwm_lookup magician_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923,
+ PWM_POLARITY_NORMAL),
+};
+
+ /*
+ * fixed regulator for pwm_backlight
+ */
+
+static struct regulator_consumer_supply pwm_backlight_supply[] = {
+ REGULATOR_SUPPLY("power", "pwm_backlight"),
+};
+
+
+static struct gpio magician_bl_gpios[] = {
+ { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" },
+ { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
+};
+
+static int magician_backlight_init(struct device *dev)
+{
+ return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios));
+}
+
+static int magician_backlight_notify(struct device *dev, int brightness)
+{
+ pr_debug("Brightness = %i\n", brightness);
+ gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
+ if (brightness >= 200) {
+ gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
+ return brightness - 72;
+ } else {
+ gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
+ return brightness;
+ }
+}
+
+static void magician_backlight_exit(struct device *dev)
+{
+ gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
+}
+
+/*
+ * LCD PWM backlight (main)
+ *
+ * MP1521 frequency should be:
+ * 100-400 Hz = 2 .5*10^6 - 10 *10^6 ns
+ */
+
+static struct platform_pwm_backlight_data backlight_data = {
+ .max_brightness = 272,
+ .dft_brightness = 100,
+ .enable_gpio = -1,
+ .init = magician_backlight_init,
+ .notify = magician_backlight_notify,
+ .exit = magician_backlight_exit,
+};
+
+static struct platform_device backlight = {
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &backlight_data,
+ },
+};
+
+/*
+ * GPIO LEDs, Phone keys backlight, vibra
+ */
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "magician::vibra",
+ .default_trigger = "none",
+ .gpio = GPIO22_MAGICIAN_VIBRA_EN,
+ },
+ {
+ .name = "magician::phone_bl",
+ .default_trigger = "backlight",
+ .gpio = GPIO103_MAGICIAN_LED_KP,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+/*
+ * PASIC3 with DS1WM
+ */
+
+static struct resource pasic3_resources[] = {
+ [0] = {
+ .start = PXA_CS2_PHYS,
+ .end = PXA_CS2_PHYS + 0x1b,
+ .flags = IORESOURCE_MEM,
+ },
+ /* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct pasic3_platform_data pasic3_platform_data = {
+ .clock_rate = 4000000,
+};
+
+static struct platform_device pasic3 = {
+ .name = "pasic3",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pasic3_resources),
+ .resource = pasic3_resources,
+ .dev = {
+ .platform_data = &pasic3_platform_data,
+ },
+};
+
+/*
+ * PXA UDC
+ */
+
+static void magician_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
+}
+
+static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
+ .udc_command = magician_udc_command,
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+};
+
+/*
+ * USB device VBus detection
+ */
+
+static struct resource gpio_vbus_resource = {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
+};
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+ .gpio_vbus = EGPIO_MAGICIAN_CABLE_VBUS,
+};
+
+static struct platform_device gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &gpio_vbus_resource,
+ .dev = {
+ .platform_data = &gpio_vbus_info,
+ },
+};
+
+/*
+ * External power
+ */
+
+static int magician_supply_init(struct device *dev)
+{
+ int ret = -1;
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger");
+ if (ret) {
+ pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret);
+ goto err_ac;
+ }
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted");
+ if (ret) {
+ pr_err("Cannot request cable detection GPIO (%i)\n", ret);
+ goto err_usb;
+ }
+
+ return 0;
+
+err_usb:
+ gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
+err_ac:
+ return ret;
+}
+
+static void magician_set_charge(int flags)
+{
+ if (flags & PDA_POWER_CHARGE_AC) {
+ pr_debug("Charging from AC\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+ } else if (flags & PDA_POWER_CHARGE_USB) {
+ pr_debug("Charging from USB\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+ } else {
+ pr_debug("Charging disabled\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0);
+ }
+}
+
+static int magician_is_ac_online(void)
+{
+ return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+ gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */
+}
+
+static int magician_is_usb_online(void)
+{
+ return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+ (!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */
+}
+
+static void magician_supply_exit(struct device *dev)
+{
+ gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED);
+ gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
+}
+
+static char *magician_supplicants[] = {
+ "ds2760-battery.0", "backup-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = magician_supply_init,
+ .exit = magician_supply_exit,
+ .is_ac_online = magician_is_ac_online,
+ .is_usb_online = magician_is_usb_online,
+ .set_charge = magician_set_charge,
+ .supplied_to = magician_supplicants,
+ .num_supplicants = ARRAY_SIZE(magician_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+ [0] = {
+ .name = "ac",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
+ },
+ [1] = {
+ .name = "usb",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
+ },
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+/*
+ * Battery charger
+ */
+
+static struct regulator_consumer_supply bq24022_consumers[] = {
+ REGULATOR_SUPPLY("vbus_draw", NULL),
+ REGULATOR_SUPPLY("ac_draw", NULL),
+};
+
+static struct regulator_init_data bq24022_init_data = {
+ .constraints = {
+ .max_uA = 500000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
+ .consumer_supplies = bq24022_consumers,
+};
+
+static struct gpio bq24022_gpios[] = {
+ { EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
+};
+
+static struct gpio_regulator_state bq24022_states[] = {
+ { .value = 100000, .gpios = (0 << 0) },
+ { .value = 500000, .gpios = (1 << 0) },
+};
+
+static struct gpio_regulator_config bq24022_info = {
+ .supply_name = "bq24022",
+
+ .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+ .enable_high = 0,
+ .enabled_at_boot = 1,
+
+ .gpios = bq24022_gpios,
+ .nr_gpios = ARRAY_SIZE(bq24022_gpios),
+
+ .states = bq24022_states,
+ .nr_states = ARRAY_SIZE(bq24022_states),
+
+ .type = REGULATOR_CURRENT,
+ .init_data = &bq24022_init_data,
+};
+
+static struct platform_device bq24022 = {
+ .name = "gpio-regulator",
+ .id = -1,
+ .dev = {
+ .platform_data = &bq24022_info,
+ },
+};
+
+/*
+ * fixed regulator for ads7846
+ */
+
+static struct regulator_consumer_supply ads7846_supply =
+ REGULATOR_SUPPLY("vcc", "spi2.0");
+
+static struct regulator_init_data vads7846_regulator = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ads7846_supply,
+};
+
+static struct fixed_voltage_config vads7846 = {
+ .supply_name = "vads7846",
+ .microvolts = 3300000, /* probably */
+ .gpio = -EINVAL,
+ .startup_delay = 0,
+ .init_data = &vads7846_regulator,
+};
+
+static struct platform_device vads7846_device = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .dev = {
+ .platform_data = &vads7846,
+ },
+};
+
+/*
+ * Vcore regulator MAX1587A
+ */
+
+static struct regulator_consumer_supply magician_max1587a_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data magician_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 700000,
+ .max_uV = 1475000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = magician_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(magician_max1587a_consumers),
+};
+
+static struct max1586_subdev_data magician_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &magician_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data magician_max1587a_info = {
+ .subdevs = magician_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
+ /*
+ * NOTICE measured directly on the PCB (board_id == 0x3a), but
+ * if R24 is present, it will boost the voltage
+ * (write 1.475V, get 1.645V and smoke)
+ */
+ .v3_gain = MAX1586_GAIN_NO_R24,
+};
+
+static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &magician_max1587a_info,
+ },
+};
+
+/*
+ * MMC/SD
+ */
+
+static int magician_mci_init(struct device *dev,
+ irq_handler_t detect_irq, void *data)
+{
+ return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0,
+ "mmc card detect", data);
+}
+
+static void magician_mci_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_MAGICIAN_SD, data);
+}
+
+static struct pxamci_platform_data magician_mci_info = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = magician_mci_init,
+ .exit = magician_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY,
+ .gpio_card_ro_invert = 1,
+ .gpio_power = EGPIO_MAGICIAN_SD_POWER,
+};
+
+
+/*
+ * USB OHCI
+ */
+
+static struct pxaohci_platform_data magician_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ /* port1: CSR Bluetooth, port2: OTG with UDC */
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+ .power_budget = 0,
+ .power_on_delay = 100,
+};
+
+/*
+ * StrataFlash
+ */
+
+static int magician_flash_init(struct platform_device *pdev)
+{
+ int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable");
+
+ if (ret) {
+ pr_err("Cannot request flash enable GPIO (%i)\n", ret);
+ return ret;
+ }
+
+ ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1);
+ if (ret) {
+ pr_err("Cannot set direction for flash enable (%i)\n", ret);
+ gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+ }
+
+ return ret;
+}
+
+static void magician_set_vpp(struct platform_device *pdev, int vpp)
+{
+ gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
+}
+
+static void magician_flash_exit(struct platform_device *pdev)
+{
+ gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+}
+
+static struct resource strataflash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition magician_flash_parts[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x0,
+ .size = 0x40000,
+ .mask_flags = MTD_WRITEABLE, /* EXPERIMENTAL */
+ },
+ {
+ .name = "Linux Kernel",
+ .offset = 0x40000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+/*
+ * physmap-flash driver
+ */
+
+static struct physmap_flash_data strataflash_data = {
+ .width = 4,
+ .init = magician_flash_init,
+ .set_vpp = magician_set_vpp,
+ .exit = magician_flash_exit,
+ .parts = magician_flash_parts,
+ .nr_parts = ARRAY_SIZE(magician_flash_parts),
+};
+
+static struct platform_device strataflash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &strataflash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &strataflash_data,
+ },
+};
+
+/*
+ * PXA I2C main controller
+ */
+
+static struct i2c_pxa_platform_data i2c_info = {
+ /* OV9640 I2C device doesn't support fast mode */
+ .fast_mode = 0,
+};
+
+/*
+ * PXA I2C power controller
+ */
+
+static struct i2c_pxa_platform_data magician_i2c_power_info = {
+ .fast_mode = 1,
+};
+
+/*
+ * Touchscreen
+ */
+
+static struct ads7846_platform_data ads7846_pdata = {
+ .model = 7846,
+ .x_plate_ohms = 317,
+ .y_plate_ohms = 500,
+ .pressure_max = 1023, /* with x plate ohms it will overflow 255 */
+ .debounce_max = 3, /* first readout is always bad */
+ .debounce_tol = 30,
+ .debounce_rep = 0,
+ .gpio_pendown = GPIO115_MAGICIAN_nPEN_IRQ,
+ .keep_vref_on = 1,
+ .wakeup = true,
+ .vref_delay_usecs = 100,
+ .penirq_recheck_delay_usecs = 100,
+};
+
+struct pxa2xx_spi_chip tsc2046_chip_info = {
+ .tx_threshold = 1,
+ .rx_threshold = 2,
+ .timeout = 64,
+ /* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
+ .gpio_cs = GPIO14_MAGICIAN_TSC2046_CS,
+};
+
+static struct pxa2xx_spi_master magician_spi_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+static struct spi_board_info ads7846_spi_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 2,
+ .max_speed_hz = 2500000,
+ .platform_data = &ads7846_pdata,
+ .controller_data = &tsc2046_chip_info,
+ .irq = PXA_GPIO_TO_IRQ(GPIO115_MAGICIAN_nPEN_IRQ),
+ },
+};
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+ &gpio_keys,
+ &egpio,
+ &backlight,
+ &pasic3,
+ &bq24022,
+ &gpio_vbus,
+ &power_supply,
+ &strataflash,
+ &leds_gpio,
+ &vads7846_device,
+};
+
+static struct gpio magician_global_gpios[] = {
+ { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
+ { GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
+
+ /* NOTICE valid LCD init sequence */
+ { GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" },
+ { GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" },
+ { GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" },
+};
+
+static void __init magician_init(void)
+{
+ void __iomem *cpld;
+ int lcd_select;
+ int err;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
+ err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
+ if (err)
+ pr_err("magician: Failed to request global GPIOs: %d\n", err);
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+
+ pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
+
+ pxa_set_ficp_info(&magician_ficp_info);
+ pxa27x_set_i2c_power_info(&magician_i2c_power_info);
+ pxa_set_i2c_info(&i2c_info);
+
+ i2c_register_board_info(1,
+ ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
+
+ pxa_set_mci_info(&magician_mci_info);
+ pxa_set_ohci_info(&magician_ohci_info);
+ pxa_set_udc_info(&magician_udc_info);
+
+ /* Check LCD type we have */
+ cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
+ if (cpld) {
+ u8 board_id = __raw_readb(cpld + 0x14);
+
+ iounmap(cpld);
+ system_rev = board_id & 0x7;
+ lcd_select = board_id & 0x8;
+ pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
+ if (lcd_select && (system_rev < 3))
+ /* NOTICE valid LCD init sequence */
+ gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
+ GPIOF_OUT_INIT_LOW, "Samsung LCD Power");
+ pxa_set_fb_info(NULL,
+ lcd_select ? &samsung_info : &toppoly_info);
+ } else
+ pr_err("LCD detection: CPLD mapping failed\n");
+
+ pxa2xx_set_spi_info(2, &magician_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_info));
+
+ regulator_register_always_on(0, "power", pwm_backlight_supply,
+ ARRAY_SIZE(pwm_backlight_supply), 5000000);
+
+ platform_add_devices(ARRAY_AND_SIZE(devices));
+}
+
+MACHINE_START(MAGICIAN, "HTC Magician")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = MAGICIAN_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_machine = magician_init,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
new file mode 100644
index 0000000..afd62a9
--- /dev/null
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -0,0 +1,679 @@
+/*
+ * linux/arch/arm/mach-pxa/mainstone.c
+ *
+ * Support for the Intel HCDDBBVA0 Development Platform.
+ * (go figure how they came up with such name...)
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 05, 2002
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include "pxa27x.h"
+#include <mach/mainstone.h>
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long mainstone_pin_config[] = {
+ /* Chip Select */
+ GPIO15_nCS_1,
+
+ /* LCD - 16bpp Active TFT */
+ GPIOxx_LCD_TFT_16BPP,
+ GPIO16_PWM0_OUT, /* Backlight */
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ /* USB Host Port 1 */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO45_AC97_SYSCLK,
+
+ /* Keypad */
+ GPIO93_KP_DKIN_0,
+ GPIO94_KP_DKIN_1,
+ GPIO95_KP_DKIN_2,
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+ GPIO96_KP_MKOUT_6,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* GPIO */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = (MST_ETH_PHYS + 0x300),
+ .end = (MST_ETH_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MAINSTONE_IRQ(3),
+ .end = MAINSTONE_IRQ(3),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata mainstone_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+ SMC91X_NOWAIT | SMC91X_USE_DMA,
+ .pxa_u16_align4 = true,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &mainstone_smc91x_info,
+ },
+};
+
+static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
+{
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF;
+ return 0;
+}
+
+static void mst_audio_shutdown(struct snd_pcm_substream *substream, void *priv)
+{
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
+}
+
+static long mst_audio_suspend_mask;
+
+static void mst_audio_suspend(void *priv)
+{
+ mst_audio_suspend_mask = MST_MSCWR2;
+ MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
+}
+
+static void mst_audio_resume(void *priv)
+{
+ MST_MSCWR2 &= mst_audio_suspend_mask | ~MST_MSCWR2_AC97_SPKROFF;
+}
+
+static pxa2xx_audio_ops_t mst_audio_ops = {
+ .startup = mst_audio_startup,
+ .shutdown = mst_audio_shutdown,
+ .suspend = mst_audio_suspend,
+ .resume = mst_audio_resume,
+};
+
+static struct resource flash_resources[] = {
+ [0] = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition mainstoneflash0_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },{
+ .name = "Kernel",
+ .size = 0x00400000,
+ .offset = 0x00040000,
+ },{
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00440000
+ }
+};
+
+static struct flash_platform_data mst_flash_data[2] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = mainstoneflash0_partitions,
+ .nr_parts = ARRAY_SIZE(mainstoneflash0_partitions),
+ }, {
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ }
+};
+
+static struct platform_device mst_flash_device[2] = {
+ {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mst_flash_data[0],
+ },
+ .resource = &flash_resources[0],
+ .num_resources = 1,
+ },
+ {
+ .name = "pxa2xx-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &mst_flash_data[1],
+ },
+ .resource = &flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup mainstone_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data mainstone_backlight_data = {
+ .max_brightness = 1023,
+ .dft_brightness = 1023,
+ .enable_gpio = -1,
+};
+
+static struct platform_device mainstone_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &mainstone_backlight_data,
+ },
+};
+
+static void __init mainstone_backlight_register(void)
+{
+ int ret;
+
+ pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
+
+ ret = platform_device_register(&mainstone_backlight_device);
+ if (ret) {
+ printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
+ pwm_remove_table(mainstone_pwm_lookup,
+ ARRAY_SIZE(mainstone_pwm_lookup));
+ }
+}
+#else
+#define mainstone_backlight_register() do { } while (0)
+#endif
+
+static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
+ .pixclock = 50000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 0x9f,
+ .right_margin = 1,
+ .vsync_len = 44,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
+ .pixclock = 110000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 8,
+ .right_margin = 20,
+ .vsync_len = 3,
+ .upper_margin = 1,
+ .lower_margin = 10,
+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info mainstone_pxafb_info = {
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
+{
+ int err;
+
+ /* make sure SD/Memory Stick multiplexer's signals
+ * are routed to MMC controller
+ */
+ MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
+
+ err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, 0,
+ "MMC card detect", data);
+ if (err)
+ printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+
+ return err;
+}
+
+static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if (( 1 << vdd) & p_d->ocr_mask) {
+ printk(KERN_DEBUG "%s: on\n", __func__);
+ MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
+ MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
+ } else {
+ printk(KERN_DEBUG "%s: off\n", __func__);
+ MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
+ }
+ return 0;
+}
+
+static void mainstone_mci_exit(struct device *dev, void *data)
+{
+ free_irq(MAINSTONE_MMC_IRQ, data);
+}
+
+static struct pxamci_platform_data mainstone_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = mainstone_mci_init,
+ .setpower = mainstone_mci_setpower,
+ .exit = mainstone_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (mode & IR_SIRMODE) {
+ MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
+ } else if (mode & IR_FIRMODE) {
+ MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
+ }
+ pxa2xx_transceiver_mode(dev, mode);
+ if (mode & IR_OFF) {
+ MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
+ } else {
+ MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
+ }
+ local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data mainstone_ficp_platform_data = {
+ .gpio_pwdown = -1,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = mainstone_irda_transceiver_mode,
+};
+
+static struct gpio_keys_button gpio_keys_button[] = {
+ [0] = {
+ .desc = "wakeup",
+ .code = KEY_SUSPEND,
+ .type = EV_KEY,
+ .gpio = 1,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data mainstone_gpio_keys = {
+ .buttons = gpio_keys_button,
+ .nbuttons = 1,
+};
+
+static struct platform_device mst_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &mainstone_gpio_keys,
+ },
+};
+
+static struct resource mst_cplds_resources[] = {
+ [0] = {
+ .start = MST_FPGA_PHYS + 0xc0,
+ .end = MST_FPGA_PHYS + 0xe0 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(0),
+ .end = PXA_GPIO_TO_IRQ(0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+ [2] = {
+ .start = MAINSTONE_IRQ(0),
+ .end = MAINSTONE_IRQ(15),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mst_cplds_device = {
+ .name = "pxa_cplds_irqs",
+ .id = -1,
+ .resource = &mst_cplds_resources[0],
+ .num_resources = 3,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &smc91x_device,
+ &mst_flash_device[0],
+ &mst_flash_device[1],
+ &mst_gpio_keys_device,
+ &mst_cplds_device,
+};
+
+static struct pxaohci_platform_data mainstone_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int mainstone_matrix_keys[] = {
+ KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
+ KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
+ KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
+ KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L),
+ KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O),
+ KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R),
+ KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U),
+ KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X),
+ KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z),
+
+ KEY(0, 4, KEY_DOT), /* . */
+ KEY(1, 4, KEY_CLOSE), /* @ */
+ KEY(4, 4, KEY_SLASH),
+ KEY(5, 4, KEY_BACKSLASH),
+ KEY(0, 5, KEY_HOME),
+ KEY(1, 5, KEY_LEFTSHIFT),
+ KEY(2, 5, KEY_SPACE),
+ KEY(3, 5, KEY_SPACE),
+ KEY(4, 5, KEY_ENTER),
+ KEY(5, 5, KEY_BACKSPACE),
+
+ KEY(0, 6, KEY_UP),
+ KEY(1, 6, KEY_DOWN),
+ KEY(2, 6, KEY_LEFT),
+ KEY(3, 6, KEY_RIGHT),
+ KEY(4, 6, KEY_SELECT),
+};
+
+static struct matrix_keymap_data mainstone_matrix_keymap_data = {
+ .keymap = mainstone_matrix_keys,
+ .keymap_size = ARRAY_SIZE(mainstone_matrix_keys),
+};
+
+struct pxa27x_keypad_platform_data mainstone_keypad_info = {
+ .matrix_key_rows = 6,
+ .matrix_key_cols = 7,
+ .matrix_keymap_data = &mainstone_matrix_keymap_data,
+
+ .enable_rotary0 = 1,
+ .rotary0_up_key = KEY_UP,
+ .rotary0_down_key = KEY_DOWN,
+
+ .debounce_interval = 30,
+};
+
+static void __init mainstone_init_keypad(void)
+{
+ pxa_set_keypad_info(&mainstone_keypad_info);
+}
+#else
+static inline void mainstone_init_keypad(void) {}
+#endif
+
+static void __init mainstone_init(void)
+{
+ int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
+ mst_flash_data[1].width = 4;
+
+ /* Compensate for SW7 which swaps the flash banks */
+ mst_flash_data[SW7].name = "processor-flash";
+ mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
+
+ printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
+ mst_flash_data[0].name);
+
+ /* system bus arbiter setting
+ * - Core_Park
+ * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+ */
+ ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+ /* reading Mainstone's "Virtual Configuration Register"
+ might be handy to select LCD type here */
+ if (0)
+ mainstone_pxafb_info.modes = &toshiba_ltm04c380k_mode;
+ else
+ mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
+
+ pxa_set_fb_info(NULL, &mainstone_pxafb_info);
+ mainstone_backlight_register();
+
+ pxa_set_mci_info(&mainstone_mci_platform_data);
+ pxa_set_ficp_info(&mainstone_ficp_platform_data);
+ pxa_set_ohci_info(&mainstone_ohci_platform_data);
+ pxa_set_i2c_info(NULL);
+ pxa_set_ac97_info(&mst_audio_ops);
+
+ mainstone_init_keypad();
+}
+
+
+static struct map_desc mainstone_io_desc[] __initdata = {
+ { /* CPLD */
+ .virtual = MST_FPGA_VIRT,
+ .pfn = __phys_to_pfn(MST_FPGA_PHYS),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init mainstone_map_io(void)
+{
+ pxa27x_map_io();
+ iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
+
+ /* for use I SRAM as framebuffer. */
+ PSLR |= 0xF04;
+ PCFR = 0x66;
+}
+
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct mainstone_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} mainstone_leds[] = {
+ { "mainstone:D28", "default-on", },
+ { "mainstone:D27", "cpu0", },
+ { "mainstone:D26", "heartbeat" },
+ { "mainstone:D25", },
+ { "mainstone:D24", },
+ { "mainstone:D23", },
+ { "mainstone:D22", },
+ { "mainstone:D21", },
+};
+
+static void mainstone_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct mainstone_led *led = container_of(cdev,
+ struct mainstone_led, cdev);
+ u32 reg = MST_LEDCTRL;
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+
+ MST_LEDCTRL = reg;
+}
+
+static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
+{
+ struct mainstone_led *led = container_of(cdev,
+ struct mainstone_led, cdev);
+ u32 reg = MST_LEDCTRL;
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init mainstone_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_mainstone())
+ return -ENODEV;
+
+ /* All ON */
+ MST_LEDCTRL |= 0xff;
+ for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
+ struct mainstone_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = mainstone_leds[i].name;
+ led->cdev.brightness_set = mainstone_led_set;
+ led->cdev.brightness_get = mainstone_led_get;
+ led->cdev.default_trigger = mainstone_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(mainstone_leds_init);
+#endif
+
+MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
+ /* Maintainer: MontaVista Software Inc. */
+ .atag_offset = 0x100, /* BLOB boot parameter setting */
+ .map_io = mainstone_map_io,
+ .nr_irqs = MAINSTONE_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = mainstone_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/mfp-pxa25x.h b/arch/arm/mach-pxa/mfp-pxa25x.h
new file mode 100644
index 0000000..d0ebb21
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp-pxa25x.h
@@ -0,0 +1,226 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_MFP_PXA25X_H
+#define __ASM_ARCH_MFP_PXA25X_H
+
+#include "mfp-pxa2xx.h"
+
+/* GPIO */
+#define GPIO2_GPIO MFP_CFG_IN(GPIO2, AF0)
+#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0)
+#define GPIO5_GPIO MFP_CFG_IN(GPIO5, AF0)
+#define GPIO6_GPIO MFP_CFG_IN(GPIO6, AF0)
+#define GPIO7_GPIO MFP_CFG_IN(GPIO7, AF0)
+#define GPIO8_GPIO MFP_CFG_IN(GPIO8, AF0)
+
+#define GPIO1_RST MFP_CFG_IN(GPIO1, AF1)
+
+/* Crystal and Clock Signals */
+#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO70_RTCCLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW)
+#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
+#define GPIO12_32KHz MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+#define GPIO72_32kHz MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1)
+#define GPIO19_DREQ_1 MFP_CFG_IN(GPIO19, AF1)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO13_MBGNT MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
+#define GPIO73_MBGNT MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
+#define GPIO14_MBREQ MFP_CFG_IN(GPIO14, AF1)
+#define GPIO66_MBREQ MFP_CFG_IN(GPIO66, AF1)
+
+/* PC CARD */
+#define GPIO52_nPCE_1 MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
+#define GPIO53_nPCE_2 MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
+#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
+#define GPIO54_nPSKTSEL MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+
+/* FFUART */
+#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1)
+#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1)
+#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1)
+#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1)
+#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1)
+#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1)
+#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* HWUART */
+#define GPIO42_HWUART_RXD MFP_CFG_IN(GPIO42, AF3)
+#define GPIO43_HWUART_TXD MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
+#define GPIO44_HWUART_CTS MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_HWUART_RTS MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
+#define GPIO48_HWUART_TXD MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
+#define GPIO49_HWUART_RXD MFP_CFG_IN(GPIO49, AF1)
+#define GPIO50_HWUART_CTS MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_HWUART_RTS MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1)
+#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1 */
+#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1)
+#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO32_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO32, AF1)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO32_I2S_SYSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
+#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_EXTCLK MFP_CFG_IN(GPIO27, AF1)
+
+/* SSP 2 - NSSP */
+#define GPIO81_SSP2_CLK_OUT MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO81_SSP2_CLK_IN MFP_CFG_IN(GPIO81, AF1)
+#define GPIO82_SSP2_FRM_OUT MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
+#define GPIO82_SSP2_FRM_IN MFP_CFG_IN(GPIO82, AF1)
+#define GPIO83_SSP2_TXD MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
+#define GPIO83_SSP2_RXD MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_SSP2_TXD MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
+#define GPIO84_SSP2_RXD MFP_CFG_IN(GPIO84, AF2)
+
+/* MMC */
+#define GPIO6_MMC_CLK MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
+#define GPIO8_MMC_CS0 MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
+#define GPIO9_MMC_CS1 MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
+#define GPIO34_MMC_CS0 MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
+#define GPIO39_MMC_CS1 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO53_MMC_CLK MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_MMC_CLK MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
+#define GPIO69_MMC_CLK MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
+#define GPIO67_MMC_CS0 MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
+#define GPIO68_MMC_CS1 MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO */
+#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF1)
+#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF1)
+#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF1)
+
+/* SDRAM */
+#define GPIO86_nSDCS2 MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
+#define GPIO87_nSDCS3 MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
+#define GPIO88_RDnWR MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
+
+/* USB */
+#define GPIO9_USB_RCV MFP_CFG_IN(GPIO9, AF1)
+#define GPIO32_USB_VP MFP_CFG_IN(GPIO32, AF2)
+#define GPIO34_USB_VM MFP_CFG_IN(GPIO34, AF2)
+#define GPIO39_USB_VPO MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
+#define GPIO56_USB_VMO MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO57_USB_nOE MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
+
+/* ASSP */
+#define GPIO28_ASSP_BITCLK_IN MFP_CFG_IN(GPIO28, AF3)
+#define GPIO28_ASSP_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
+#define GPIO29_ASSP_RXD MFP_CFG_IN(GPIO29, AF3)
+#define GPIO30_ASSP_TXD MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_ASSP_SFRM_IN MFP_CFG_IN(GPIO31, AF1)
+#define GPIO31_ASSP_SFRM_OUT MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO89_AC97_nRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+#endif /* CONFIG_CPU_PXA26x */
+
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP \
+ GPIO58_LCD_LDD_0, \
+ GPIO59_LCD_LDD_1, \
+ GPIO60_LCD_LDD_2, \
+ GPIO61_LCD_LDD_3, \
+ GPIO62_LCD_LDD_4, \
+ GPIO63_LCD_LDD_5, \
+ GPIO64_LCD_LDD_6, \
+ GPIO65_LCD_LDD_7, \
+ GPIO66_LCD_LDD_8, \
+ GPIO67_LCD_LDD_9, \
+ GPIO68_LCD_LDD_10, \
+ GPIO69_LCD_LDD_11, \
+ GPIO70_LCD_LDD_12, \
+ GPIO71_LCD_LDD_13, \
+ GPIO72_LCD_LDD_14, \
+ GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_DSTN_16BPP \
+ GPIOxx_LCD_16BPP, \
+ GPIO74_LCD_FCLK, \
+ GPIO75_LCD_LCLK, \
+ GPIO76_LCD_PCLK
+
+#define GPIOxx_LCD_TFT_16BPP \
+ GPIOxx_LCD_16BPP, \
+ GPIO74_LCD_FCLK, \
+ GPIO75_LCD_LCLK, \
+ GPIO76_LCD_PCLK, \
+ GPIO77_LCD_BIAS
+
+#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/mfp-pxa27x.h b/arch/arm/mach-pxa/mfp-pxa27x.h
new file mode 100644
index 0000000..9f5ffb7
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp-pxa27x.h
@@ -0,0 +1,472 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_MFP_PXA27X_H
+#define __ASM_ARCH_MFP_PXA27X_H
+
+/*
+ * NOTE: for those special-function bidirectional GPIOs, as described
+ * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
+ * alternative is preserved, the direction is actually selected by the
+ * specific controller, and this should work in most cases.
+ */
+
+#include "mfp-pxa2xx.h"
+
+/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
+ * bit is set, regardless of the GPIO configuration
+ */
+#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0)
+
+/* GPIO */
+#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0)
+#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF0)
+#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF0)
+#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF0)
+#define GPIO90_GPIO MFP_CFG_IN(GPIO90, AF0)
+#define GPIO91_GPIO MFP_CFG_IN(GPIO91, AF0)
+#define GPIO92_GPIO MFP_CFG_IN(GPIO92, AF0)
+#define GPIO93_GPIO MFP_CFG_IN(GPIO93, AF0)
+#define GPIO94_GPIO MFP_CFG_IN(GPIO94, AF0)
+#define GPIO95_GPIO MFP_CFG_IN(GPIO95, AF0)
+#define GPIO96_GPIO MFP_CFG_IN(GPIO96, AF0)
+#define GPIO97_GPIO MFP_CFG_IN(GPIO97, AF0)
+#define GPIO98_GPIO MFP_CFG_IN(GPIO98, AF0)
+#define GPIO99_GPIO MFP_CFG_IN(GPIO99, AF0)
+#define GPIO100_GPIO MFP_CFG_IN(GPIO100, AF0)
+#define GPIO101_GPIO MFP_CFG_IN(GPIO101, AF0)
+#define GPIO102_GPIO MFP_CFG_IN(GPIO102, AF0)
+#define GPIO103_GPIO MFP_CFG_IN(GPIO103, AF0)
+#define GPIO104_GPIO MFP_CFG_IN(GPIO104, AF0)
+#define GPIO105_GPIO MFP_CFG_IN(GPIO105, AF0)
+#define GPIO106_GPIO MFP_CFG_IN(GPIO106, AF0)
+#define GPIO107_GPIO MFP_CFG_IN(GPIO107, AF0)
+#define GPIO108_GPIO MFP_CFG_IN(GPIO108, AF0)
+#define GPIO109_GPIO MFP_CFG_IN(GPIO109, AF0)
+#define GPIO110_GPIO MFP_CFG_IN(GPIO110, AF0)
+#define GPIO111_GPIO MFP_CFG_IN(GPIO111, AF0)
+#define GPIO112_GPIO MFP_CFG_IN(GPIO112, AF0)
+#define GPIO113_GPIO MFP_CFG_IN(GPIO113, AF0)
+#define GPIO114_GPIO MFP_CFG_IN(GPIO114, AF0)
+#define GPIO115_GPIO MFP_CFG_IN(GPIO115, AF0)
+#define GPIO116_GPIO MFP_CFG_IN(GPIO116, AF0)
+#define GPIO117_GPIO MFP_CFG_IN(GPIO117, AF0)
+#define GPIO118_GPIO MFP_CFG_IN(GPIO118, AF0)
+#define GPIO119_GPIO MFP_CFG_IN(GPIO119, AF0)
+#define GPIO120_GPIO MFP_CFG_IN(GPIO120, AF0)
+
+/* Crystal and Clock Signals */
+#define GPIO9_HZ_CLK MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
+#define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
+#define GPIO12_48_MHz MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
+#define GPIO13_CLK_EXT MFP_CFG_IN(GPIO13, AF1)
+
+/* OS Timer Signals */
+#define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1)
+#define GPIO12_EXT_SYNC_1 MFP_CFG_IN(GPIO12, AF1)
+#define GPIO9_CHOUT_0 MFP_CFG_OUT(GPIO9, AF3, DRIVE_LOW)
+#define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
+#define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO12_CHOUT_1 MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO20_nSDCS_2 MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
+#define GPIO21_nSDCS_3 MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
+#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO21_DVAL_0 MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
+#define GPIO116_DVAL_0 MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
+#define GPIO33_DVAL_1 MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
+#define GPIO96_DVAL_1 MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
+#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1)
+#define GPIO115_DREQ_0 MFP_CFG_IN(GPIO115, AF1)
+#define GPIO80_DREQ_1 MFP_CFG_IN(GPIO80, AF1)
+#define GPIO97_DREQ_1 MFP_CFG_IN(GPIO97, AF2)
+#define GPIO85_DREQ_2 MFP_CFG_IN(GPIO85, AF2)
+#define GPIO100_DREQ_2 MFP_CFG_IN(GPIO100, AF2)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO20_MBREQ MFP_CFG_IN(GPIO20, AF2)
+#define GPIO80_MBREQ MFP_CFG_IN(GPIO80, AF2)
+#define GPIO96_MBREQ MFP_CFG_IN(GPIO96, AF2)
+#define GPIO115_MBREQ MFP_CFG_IN(GPIO115, AF3)
+#define GPIO21_MBGNT MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
+#define GPIO33_MBGNT MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
+#define GPIO97_MBGNT MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
+#define GPIO116_MBGNT MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
+
+/* PC CARD */
+#define GPIO15_nPCE_1 MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO85_nPCE_1 MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
+#define GPIO86_nPCE_1 MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
+#define GPIO102_nPCE_1 MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
+#define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+#define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
+#define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1)
+#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
+#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
+
+/* I2C */
+#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1)
+#define GPIO118_I2C_SDA MFP_CFG_IN(GPIO118, AF1)
+
+/* FFUART */
+#define GPIO9_FFUART_CTS MFP_CFG_IN(GPIO9, AF3)
+#define GPIO26_FFUART_CTS MFP_CFG_IN(GPIO26, AF3)
+#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1)
+#define GPIO100_FFUART_CTS MFP_CFG_IN(GPIO100, AF3)
+#define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1)
+#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1)
+#define GPIO33_FFUART_DSR MFP_CFG_IN(GPIO33, AF2)
+#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1)
+#define GPIO89_FFUART_RI MFP_CFG_IN(GPIO89, AF3)
+#define GPIO19_FFUART_RXD MFP_CFG_IN(GPIO19, AF3)
+#define GPIO33_FFUART_RXD MFP_CFG_IN(GPIO33, AF1)
+#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1)
+#define GPIO41_FFUART_RXD MFP_CFG_IN(GPIO41, AF1)
+#define GPIO53_FFUART_RXD MFP_CFG_IN(GPIO53, AF1)
+#define GPIO85_FFUART_RXD MFP_CFG_IN(GPIO85, AF1)
+#define GPIO96_FFUART_RXD MFP_CFG_IN(GPIO96, AF3)
+#define GPIO102_FFUART_RXD MFP_CFG_IN(GPIO102, AF3)
+#define GPIO16_FFUART_TXD MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
+#define GPIO37_FFUART_TXD MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
+#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_TXD MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO99_FFUART_TXD MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
+#define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_RTS MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
+#define GPIO98_FFUART_RTS MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO82_FFUART_DTR MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1)
+#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1)
+#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO45_BTUART_RTS_LPM_LOW MFP_CFG_OUT(GPIO45, AF2, DRIVE_LOW)
+#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD_LPM_LOW MFP_CFG_OUT(GPIO43, AF2, DRIVE_LOW)
+
+/* STUART */
+#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO42_FICP_RXD MFP_CFG_IN(GPIO42, AF2)
+#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1)
+#define GPIO43_FICP_TXD MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
+#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1/2/3 */
+#define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
+#define GPIO12_PWM3_OUT MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
+#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+#define GPIO38_PWM1_OUT MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
+#define GPIO46_PWM2_OUT MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
+#define GPIO47_PWM3_OUT MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
+#define GPIO79_PWM2_OUT MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
+#define GPIO80_PWM3_OUT MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
+#define GPIO115_PWM1_OUT MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO94_AC97_SYNC MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
+#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO93_AC97_SDATA_OUT MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
+#define GPIO45_AC97_SYSCLK MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
+#define GPIO89_AC97_SYSCLK MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
+#define GPIO98_AC97_SYSCLK MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
+#define GPIO95_AC97_nRESET MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
+#define GPIO113_AC97_nRESET MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
+#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1)
+#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2)
+#define GPIO99_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO99, AF2)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK_IN MFP_CFG_IN(GPIO23, AF2)
+#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3)
+#define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
+#define GPIO53_SSP1_SYSCLK MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM MFP_CFG_IN(GPIO24, AF2)
+#define GPIO28_SSP1_SFRM MFP_CFG_IN(GPIO28, AF3)
+#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO57_SSP1_TXD MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
+#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2)
+
+/* SSP 2 */
+#define GPIO19_SSP2_SCLK MFP_CFG_IN(GPIO19, AF1)
+#define GPIO22_SSP2_SCLK MFP_CFG_IN(GPIO22, AF3)
+#define GPIO29_SSP2_SCLK MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
+#define GPIO36_SSP2_SCLK MFP_CFG_IN(GPIO36, AF2)
+#define GPIO50_SSP2_SCLK MFP_CFG_IN(GPIO50, AF3)
+#define GPIO22_SSP2_SYSCLK MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
+#define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2)
+#define GPIO37_SSP2_SFRM MFP_CFG_IN(GPIO37, AF2)
+#define GPIO87_SSP2_SFRM MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
+#define GPIO88_SSP2_SFRM MFP_CFG_IN(GPIO88, AF3)
+#define GPIO13_SSP2_TXD MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
+#define GPIO38_SSP2_TXD MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
+#define GPIO87_SSP2_TXD MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
+#define GPIO89_SSP2_TXD MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
+#define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2)
+#define GPIO29_SSP2_RXD MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
+#define GPIO40_SSP2_RXD MFP_CFG_IN(GPIO40, AF1)
+#define GPIO86_SSP2_RXD MFP_CFG_IN(GPIO86, AF1)
+#define GPIO88_SSP2_RXD MFP_CFG_IN(GPIO88, AF2)
+#define GPIO22_SSP2_EXTCLK MFP_CFG_IN(GPIO22, AF1)
+#define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1)
+#define GPIO22_SSP2_SCLKEN MFP_CFG_IN(GPIO22, AF2)
+#define GPIO23_SSP2_SCLKEN MFP_CFG_IN(GPIO23, AF2)
+
+/* SSP 3 */
+#define GPIO34_SSP3_SCLK MFP_CFG_IN(GPIO34, AF3)
+#define GPIO40_SSP3_SCLK MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
+#define GPIO52_SSP3_SCLK MFP_CFG_IN(GPIO52, AF2)
+#define GPIO84_SSP3_SCLK MFP_CFG_IN(GPIO84, AF1)
+#define GPIO45_SSP3_SYSCLK MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
+#define GPIO35_SSP3_SFRM MFP_CFG_IN(GPIO35, AF3)
+#define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3)
+#define GPIO83_SSP3_SFRM MFP_CFG_IN(GPIO83, AF1)
+#define GPIO35_SSP3_TXD MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
+#define GPIO38_SSP3_TXD MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
+#define GPIO81_SSP3_TXD MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO41_SSP3_RXD MFP_CFG_IN(GPIO41, AF3)
+#define GPIO82_SSP3_RXD MFP_CFG_IN(GPIO82, AF1)
+#define GPIO89_SSP3_RXD MFP_CFG_IN(GPIO89, AF1)
+
+/* MMC */
+#define GPIO32_MMC_CLK MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
+#define GPIO92_MMC_DAT_0 MFP_CFG_IN(GPIO92, AF1)
+#define GPIO109_MMC_DAT_1 MFP_CFG_IN(GPIO109, AF1)
+#define GPIO110_MMC_DAT_2 MFP_CFG_IN(GPIO110, AF1)
+#define GPIO111_MMC_DAT_3 MFP_CFG_IN(GPIO111, AF1)
+#define GPIO112_MMC_CMD MFP_CFG_IN(GPIO112, AF1)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO86_LCD_LDD_16 MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
+#define GPIO87_LCD_LDD_17 MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1)
+#define GPIO19_LCD_CS MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
+
+/* Keypad */
+#define GPIO93_KP_DKIN_0 MFP_CFG_IN(GPIO93, AF1)
+#define GPIO94_KP_DKIN_1 MFP_CFG_IN(GPIO94, AF1)
+#define GPIO95_KP_DKIN_2 MFP_CFG_IN(GPIO95, AF1)
+#define GPIO96_KP_DKIN_3 MFP_CFG_IN(GPIO96, AF1)
+#define GPIO97_KP_DKIN_4 MFP_CFG_IN(GPIO97, AF1)
+#define GPIO98_KP_DKIN_5 MFP_CFG_IN(GPIO98, AF1)
+#define GPIO99_KP_DKIN_6 MFP_CFG_IN(GPIO99, AF1)
+#define GPIO13_KP_KDIN_7 MFP_CFG_IN(GPIO13, AF2)
+#define GPIO100_KP_MKIN_0 MFP_CFG_IN(GPIO100, AF1)
+#define GPIO101_KP_MKIN_1 MFP_CFG_IN(GPIO101, AF1)
+#define GPIO102_KP_MKIN_2 MFP_CFG_IN(GPIO102, AF1)
+#define GPIO34_KP_MKIN_3 MFP_CFG_IN(GPIO34, AF2)
+#define GPIO37_KP_MKIN_3 MFP_CFG_IN(GPIO37, AF3)
+#define GPIO97_KP_MKIN_3 MFP_CFG_IN(GPIO97, AF3)
+#define GPIO98_KP_MKIN_4 MFP_CFG_IN(GPIO98, AF3)
+#define GPIO38_KP_MKIN_4 MFP_CFG_IN(GPIO38, AF2)
+#define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1)
+#define GPIO16_KP_MKIN_5 MFP_CFG_IN(GPIO16, AF1)
+#define GPIO90_KP_MKIN_5 MFP_CFG_IN(GPIO90, AF1)
+#define GPIO99_KP_MKIN_5 MFP_CFG_IN(GPIO99, AF3)
+#define GPIO17_KP_MKIN_6 MFP_CFG_IN(GPIO17, AF1)
+#define GPIO91_KP_MKIN_6 MFP_CFG_IN(GPIO91, AF1)
+#define GPIO95_KP_MKIN_6 MFP_CFG_IN(GPIO95, AF3)
+#define GPIO13_KP_MKIN_7 MFP_CFG_IN(GPIO13, AF3)
+#define GPIO36_KP_MKIN_7 MFP_CFG_IN(GPIO36, AF3)
+#define GPIO103_KP_MKOUT_0 MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_1 MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_2 MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
+#define GPIO106_KP_MKOUT_3 MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
+#define GPIO107_KP_MKOUT_4 MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
+#define GPIO108_KP_MKOUT_5 MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
+#define GPIO35_KP_MKOUT_6 MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
+#define GPIO22_KP_MKOUT_7 MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
+#define GPIO40_KP_MKOUT_6 MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
+#define GPIO41_KP_MKOUT_7 MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
+#define GPIO96_KP_MKOUT_6 MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
+
+/* USB P3 */
+#define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3)
+#define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3)
+#define GPIO30_USB_P3_2 MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#define GPIO56_USB_P3_4 MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO86_USB_P3_5 MFP_CFG_IN(GPIO86, AF3)
+#define GPIO87_USB_P3_1 MFP_CFG_IN(GPIO87, AF3)
+#define GPIO90_USB_P3_5 MFP_CFG_IN(GPIO90, AF2)
+#define GPIO91_USB_P3_1 MFP_CFG_IN(GPIO91, AF2)
+#define GPIO113_USB_P3_3 MFP_CFG_IN(GPIO113, AF3)
+
+/* USB P2 */
+#define GPIO34_USB_P2_2 MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
+#define GPIO35_USB_P2_1 MFP_CFG_IN(GPIO35, AF2)
+#define GPIO36_USB_P2_4 MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
+#define GPIO37_USB_P2_8 MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
+#define GPIO38_USB_P2_3 MFP_CFG_IN(GPIO38, AF3)
+#define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO40_USB_P2_5 MFP_CFG_IN(GPIO40, AF3)
+#define GPIO41_USB_P2_7 MFP_CFG_IN(GPIO41, AF2)
+#define GPIO53_USB_P2_3 MFP_CFG_IN(GPIO53, AF2)
+
+/* USB Host Port 1/2 */
+#define GPIO88_USBH1_PWR MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_USBH1_PEN MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
+#define GPIO119_USBH2_PWR MFP_CFG_IN(GPIO119, AF1)
+#define GPIO120_USBH2_PEN MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
+
+/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
+#define GPIO115_CIF_DD_3 MFP_CFG_IN(GPIO115, AF2)
+#define GPIO116_CIF_DD_2 MFP_CFG_IN(GPIO116, AF1)
+#define GPIO12_CIF_DD_7 MFP_CFG_IN(GPIO12, AF2)
+#define GPIO17_CIF_DD_6 MFP_CFG_IN(GPIO17, AF2)
+#define GPIO23_CIF_MCLK MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
+#define GPIO24_CIF_FV MFP_CFG_IN(GPIO24, AF1)
+#define GPIO25_CIF_LV MFP_CFG_IN(GPIO25, AF1)
+#define GPIO26_CIF_PCLK MFP_CFG_IN(GPIO26, AF2)
+#define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3)
+#define GPIO42_CIF_MCLK MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
+#define GPIO43_CIF_FV MFP_CFG_IN(GPIO43, AF3)
+#define GPIO44_CIF_LV MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_CIF_PCLK MFP_CFG_IN(GPIO45, AF3)
+#define GPIO47_CIF_DD_0 MFP_CFG_IN(GPIO47, AF1)
+#define GPIO48_CIF_DD_5 MFP_CFG_IN(GPIO48, AF1)
+#define GPIO50_CIF_DD_3 MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_CIF_DD_2 MFP_CFG_IN(GPIO51, AF1)
+#define GPIO52_CIF_DD_4 MFP_CFG_IN(GPIO52, AF1)
+#define GPIO53_CIF_MCLK MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
+#define GPIO54_CIF_PCLK MFP_CFG_IN(GPIO54, AF3)
+#define GPIO55_CIF_DD_1 MFP_CFG_IN(GPIO55, AF1)
+#define GPIO81_CIF_DD_0 MFP_CFG_IN(GPIO81, AF2)
+#define GPIO82_CIF_DD_5 MFP_CFG_IN(GPIO82, AF3)
+#define GPIO83_CIF_DD_4 MFP_CFG_IN(GPIO83, AF3)
+#define GPIO84_CIF_FV MFP_CFG_IN(GPIO84, AF3)
+#define GPIO85_CIF_LV MFP_CFG_IN(GPIO85, AF3)
+#define GPIO90_CIF_DD_4 MFP_CFG_IN(GPIO90, AF3)
+#define GPIO91_CIF_DD_5 MFP_CFG_IN(GPIO91, AF3)
+#define GPIO93_CIF_DD_6 MFP_CFG_IN(GPIO93, AF2)
+#define GPIO94_CIF_DD_5 MFP_CFG_IN(GPIO94, AF2)
+#define GPIO95_CIF_DD_4 MFP_CFG_IN(GPIO95, AF2)
+#define GPIO98_CIF_DD_0 MFP_CFG_IN(GPIO98, AF2)
+#define GPIO103_CIF_DD_3 MFP_CFG_IN(GPIO103, AF1)
+#define GPIO104_CIF_DD_2 MFP_CFG_IN(GPIO104, AF1)
+#define GPIO105_CIF_DD_1 MFP_CFG_IN(GPIO105, AF1)
+#define GPIO106_CIF_DD_9 MFP_CFG_IN(GPIO106, AF1)
+#define GPIO107_CIF_DD_8 MFP_CFG_IN(GPIO107, AF1)
+#define GPIO108_CIF_DD_7 MFP_CFG_IN(GPIO108, AF1)
+#define GPIO114_CIF_DD_1 MFP_CFG_IN(GPIO114, AF1)
+
+/* Universal Subscriber ID Interface */
+#define GPIO114_UVS0 MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
+#define GPIO115_nUVS1 MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
+#define GPIO116_nUVS2 MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
+#define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
+#define GPIO91_UCLK MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
+#define GPIO19_nURST MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
+#define GPIO90_nURST MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
+#define GPIO116_UDET MFP_CFG_IN(GPIO116, AF3)
+#define GPIO114_UEN MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
+#define GPIO115_UEN MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
+
+/* Mobile Scalable Link (MSL) Interface */
+#define GPIO81_BB_OB_DAT_0 MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
+#define GPIO48_BB_OB_DAT_1 MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
+#define GPIO50_BB_OB_DAT_2 MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
+#define GPIO51_BB_OB_DAT_3 MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
+#define GPIO52_BB_OB_CLK MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
+#define GPIO53_BB_OB_STB MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_BB_OB_WAIT MFP_CFG_IN(GPIO54, AF2)
+#define GPIO82_BB_IB_DAT_0 MFP_CFG_IN(GPIO82, AF2)
+#define GPIO55_BB_IB_DAT_1 MFP_CFG_IN(GPIO55, AF2)
+#define GPIO56_BB_IB_DAT_2 MFP_CFG_IN(GPIO56, AF2)
+#define GPIO57_BB_IB_DAT_3 MFP_CFG_IN(GPIO57, AF2)
+#define GPIO83_BB_IB_CLK MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_BB_IB_STB MFP_CFG_IN(GPIO84, AF2)
+#define GPIO85_BB_IB_WAIT MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
+
+/* Memory Stick Host Controller */
+#define GPIO92_MSBS MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
+#define GPIO109_MSSDIO MFP_CFG_IN(GPIO109, AF2)
+#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2)
+#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP \
+ GPIO58_LCD_LDD_0, \
+ GPIO59_LCD_LDD_1, \
+ GPIO60_LCD_LDD_2, \
+ GPIO61_LCD_LDD_3, \
+ GPIO62_LCD_LDD_4, \
+ GPIO63_LCD_LDD_5, \
+ GPIO64_LCD_LDD_6, \
+ GPIO65_LCD_LDD_7, \
+ GPIO66_LCD_LDD_8, \
+ GPIO67_LCD_LDD_9, \
+ GPIO68_LCD_LDD_10, \
+ GPIO69_LCD_LDD_11, \
+ GPIO70_LCD_LDD_12, \
+ GPIO71_LCD_LDD_13, \
+ GPIO72_LCD_LDD_14, \
+ GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_TFT_16BPP \
+ GPIOxx_LCD_16BPP, \
+ GPIO74_LCD_FCLK, \
+ GPIO75_LCD_LCLK, \
+ GPIO76_LCD_PCLK, \
+ GPIO77_LCD_BIAS
+
+/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */
+#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT)
+#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT)
+
+extern int keypad_set_wake(unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
new file mode 100644
index 0000000..3732aec
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -0,0 +1,439 @@
+/*
+ * linux/arch/arm/mach-pxa/mfp-pxa2xx.c
+ *
+ * PXA2xx pin mux configuration support
+ *
+ * The GPIOs on PXA2xx can be configured as one of many alternate
+ * functions, this is by concept samilar to the MFP configuration
+ * on PXA3xx, what's more important, the low power pin state and
+ * wakeup detection are also supported by the same framework.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <mach/pxa2xx-regs.h>
+#include "mfp-pxa2xx.h"
+
+#include "generic.h"
+
+#define PGSR(x) __REG2(0x40F00020, (x) << 2)
+#define __GAFR(u, x) __REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
+#define GAFR_L(x) __GAFR(0, x)
+#define GAFR_U(x) __GAFR(1, x)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5))
+#define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24)
+
+#define PWER_WE35 (1 << 24)
+
+struct gpio_desc {
+ unsigned valid : 1;
+ unsigned can_wakeup : 1;
+ unsigned keypad_gpio : 1;
+ unsigned dir_inverted : 1;
+ unsigned int mask; /* bit mask in PWER or PKWR */
+ unsigned int mux_mask; /* bit mask of muxed gpio bits, 0 if no mux */
+ unsigned long config;
+};
+
+static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
+
+static unsigned long gpdr_lpm[4];
+
+static int __mfp_config_gpio(unsigned gpio, unsigned long c)
+{
+ unsigned long gafr, mask = GPIO_bit(gpio);
+ int bank = gpio_to_bank(gpio);
+ int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
+ int shft = (gpio & 0xf) << 1;
+ int fn = MFP_AF(c);
+ int is_out = (c & MFP_DIR_OUT) ? 1 : 0;
+
+ if (fn > 3)
+ return -EINVAL;
+
+ /* alternate function and direction at run-time */
+ gafr = (uorl == 0) ? GAFR_L(bank) : GAFR_U(bank);
+ gafr = (gafr & ~(0x3 << shft)) | (fn << shft);
+
+ if (uorl == 0)
+ GAFR_L(bank) = gafr;
+ else
+ GAFR_U(bank) = gafr;
+
+ if (is_out ^ gpio_desc[gpio].dir_inverted)
+ GPDR(gpio) |= mask;
+ else
+ GPDR(gpio) &= ~mask;
+
+ /* alternate function and direction at low power mode */
+ switch (c & MFP_LPM_STATE_MASK) {
+ case MFP_LPM_DRIVE_HIGH:
+ PGSR(bank) |= mask;
+ is_out = 1;
+ break;
+ case MFP_LPM_DRIVE_LOW:
+ PGSR(bank) &= ~mask;
+ is_out = 1;
+ break;
+ case MFP_LPM_INPUT:
+ case MFP_LPM_DEFAULT:
+ break;
+ default:
+ /* warning and fall through, treat as MFP_LPM_DEFAULT */
+ pr_warn("%s: GPIO%d: unsupported low power mode\n",
+ __func__, gpio);
+ break;
+ }
+
+ if (is_out ^ gpio_desc[gpio].dir_inverted)
+ gpdr_lpm[bank] |= mask;
+ else
+ gpdr_lpm[bank] &= ~mask;
+
+ /* give early warning if MFP_LPM_CAN_WAKEUP is set on the
+ * configurations of those pins not able to wakeup
+ */
+ if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) {
+ pr_warn("%s: GPIO%d unable to wakeup\n", __func__, gpio);
+ return -EINVAL;
+ }
+
+ if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
+ pr_warn("%s: output GPIO%d unable to wakeup\n", __func__, gpio);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline int __mfp_validate(int mfp)
+{
+ int gpio = mfp_to_gpio(mfp);
+
+ if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+ pr_warn("%s: GPIO%d is invalid pin\n", __func__, gpio);
+ return -1;
+ }
+
+ return gpio;
+}
+
+void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
+{
+ unsigned long flags;
+ unsigned long *c;
+ int i, gpio;
+
+ for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
+
+ gpio = __mfp_validate(MFP_PIN(*c));
+ if (gpio < 0)
+ continue;
+
+ local_irq_save(flags);
+
+ gpio_desc[gpio].config = *c;
+ __mfp_config_gpio(gpio, *c);
+
+ local_irq_restore(flags);
+ }
+}
+
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+ unsigned long flags, c;
+ int gpio;
+
+ gpio = __mfp_validate(mfp);
+ if (gpio < 0)
+ return;
+
+ local_irq_save(flags);
+
+ c = gpio_desc[gpio].config;
+ c = (c & ~MFP_LPM_STATE_MASK) | lpm;
+ __mfp_config_gpio(gpio, c);
+
+ local_irq_restore(flags);
+}
+
+int gpio_set_wake(unsigned int gpio, unsigned int on)
+{
+ struct gpio_desc *d;
+ unsigned long c, mux_taken;
+
+ if (gpio > mfp_to_gpio(MFP_PIN_GPIO127))
+ return -EINVAL;
+
+ d = &gpio_desc[gpio];
+ c = d->config;
+
+ if (!d->valid)
+ return -EINVAL;
+
+ /* Allow keypad GPIOs to wakeup system when
+ * configured as generic GPIOs.
+ */
+ if (d->keypad_gpio && (MFP_AF(d->config) == 0) &&
+ (d->config & MFP_LPM_CAN_WAKEUP)) {
+ if (on)
+ PKWR |= d->mask;
+ else
+ PKWR &= ~d->mask;
+ return 0;
+ }
+
+ mux_taken = (PWER & d->mux_mask) & (~d->mask);
+ if (on && mux_taken)
+ return -EBUSY;
+
+ if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) {
+ if (on) {
+ PWER = (PWER & ~d->mux_mask) | d->mask;
+
+ if (c & MFP_LPM_EDGE_RISE)
+ PRER |= d->mask;
+ else
+ PRER &= ~d->mask;
+
+ if (c & MFP_LPM_EDGE_FALL)
+ PFER |= d->mask;
+ else
+ PFER &= ~d->mask;
+ } else {
+ PWER &= ~d->mask;
+ PRER &= ~d->mask;
+ PFER &= ~d->mask;
+ }
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PXA25x
+static void __init pxa25x_mfp_init(void)
+{
+ int i;
+
+ /* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+ pxa_last_gpio = 89;
+#else
+ pxa_last_gpio = 84;
+#endif
+ for (i = 0; i <= pxa_last_gpio; i++)
+ gpio_desc[i].valid = 1;
+
+ for (i = 0; i <= 15; i++) {
+ gpio_desc[i].can_wakeup = 1;
+ gpio_desc[i].mask = GPIO_bit(i);
+ }
+
+ /* PXA26x has additional 4 GPIOs (86/87/88/89) which has the
+ * direction bit inverted in GPDR2. See PXA26x DM 4.1.1.
+ */
+ for (i = 86; i <= pxa_last_gpio; i++)
+ gpio_desc[i].dir_inverted = 1;
+}
+#else
+static inline void pxa25x_mfp_init(void) {}
+#endif /* CONFIG_PXA25x */
+
+#ifdef CONFIG_PXA27x
+static int pxa27x_pkwr_gpio[] = {
+ 13, 16, 17, 34, 36, 37, 38, 39, 90, 91, 93, 94,
+ 95, 96, 97, 98, 99, 100, 101, 102
+};
+
+int keypad_set_wake(unsigned int on)
+{
+ unsigned int i, gpio, mask = 0;
+ struct gpio_desc *d;
+
+ for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
+
+ gpio = pxa27x_pkwr_gpio[i];
+ d = &gpio_desc[gpio];
+
+ /* skip if configured as generic GPIO */
+ if (MFP_AF(d->config) == 0)
+ continue;
+
+ if (d->config & MFP_LPM_CAN_WAKEUP)
+ mask |= gpio_desc[gpio].mask;
+ }
+
+ if (on)
+ PKWR |= mask;
+ else
+ PKWR &= ~mask;
+ return 0;
+}
+
+#define PWER_WEMUX2_GPIO38 (1 << 16)
+#define PWER_WEMUX2_GPIO53 (2 << 16)
+#define PWER_WEMUX2_GPIO40 (3 << 16)
+#define PWER_WEMUX2_GPIO36 (4 << 16)
+#define PWER_WEMUX2_MASK (7 << 16)
+#define PWER_WEMUX3_GPIO31 (1 << 19)
+#define PWER_WEMUX3_GPIO113 (2 << 19)
+#define PWER_WEMUX3_MASK (3 << 19)
+
+#define INIT_GPIO_DESC_MUXED(mux, gpio) \
+do { \
+ gpio_desc[(gpio)].can_wakeup = 1; \
+ gpio_desc[(gpio)].mask = PWER_ ## mux ## _GPIO ##gpio; \
+ gpio_desc[(gpio)].mux_mask = PWER_ ## mux ## _MASK; \
+} while (0)
+
+static void __init pxa27x_mfp_init(void)
+{
+ int i, gpio;
+
+ pxa_last_gpio = 120; /* running before pxa_gpio_probe() */
+ for (i = 0; i <= pxa_last_gpio; i++) {
+ /* skip GPIO2, 5, 6, 7, 8, they are not
+ * valid pins allow configuration
+ */
+ if (i == 2 || i == 5 || i == 6 || i == 7 || i == 8)
+ continue;
+
+ gpio_desc[i].valid = 1;
+ }
+
+ /* Keypad GPIOs */
+ for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
+ gpio = pxa27x_pkwr_gpio[i];
+ gpio_desc[gpio].can_wakeup = 1;
+ gpio_desc[gpio].keypad_gpio = 1;
+ gpio_desc[gpio].mask = 1 << i;
+ }
+
+ /* Overwrite GPIO13 as a PWER wakeup source */
+ for (i = 0; i <= 15; i++) {
+ /* skip GPIO2, 5, 6, 7, 8 */
+ if (GPIO_bit(i) & 0x1e4)
+ continue;
+
+ gpio_desc[i].can_wakeup = 1;
+ gpio_desc[i].mask = GPIO_bit(i);
+ }
+
+ gpio_desc[35].can_wakeup = 1;
+ gpio_desc[35].mask = PWER_WE35;
+
+ INIT_GPIO_DESC_MUXED(WEMUX3, 31);
+ INIT_GPIO_DESC_MUXED(WEMUX3, 113);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 38);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 53);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 40);
+ INIT_GPIO_DESC_MUXED(WEMUX2, 36);
+}
+#else
+static inline void pxa27x_mfp_init(void) {}
+#endif /* CONFIG_PXA27x */
+
+#ifdef CONFIG_PM
+static unsigned long saved_gafr[2][4];
+static unsigned long saved_gpdr[4];
+static unsigned long saved_gplr[4];
+static unsigned long saved_pgsr[4];
+
+static int pxa2xx_mfp_suspend(void)
+{
+ int i;
+
+ /* set corresponding PGSR bit of those marked MFP_LPM_KEEP_OUTPUT */
+ for (i = 0; i < pxa_last_gpio; i++) {
+ if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
+ (GPDR(i) & GPIO_bit(i))) {
+ if (GPLR(i) & GPIO_bit(i))
+ PGSR(gpio_to_bank(i)) |= GPIO_bit(i);
+ else
+ PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i);
+ }
+ }
+
+ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
+ saved_gafr[0][i] = GAFR_L(i);
+ saved_gafr[1][i] = GAFR_U(i);
+ saved_gpdr[i] = GPDR(i * 32);
+ saved_gplr[i] = GPLR(i * 32);
+ saved_pgsr[i] = PGSR(i);
+
+ GPSR(i * 32) = PGSR(i);
+ GPCR(i * 32) = ~PGSR(i);
+ }
+
+ /* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */
+ for (i = 0; i < pxa_last_gpio; i++) {
+ if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) ||
+ ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
+ (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i))))
+ GPDR(i) |= GPIO_bit(i);
+ else
+ GPDR(i) &= ~GPIO_bit(i);
+ }
+
+ return 0;
+}
+
+static void pxa2xx_mfp_resume(void)
+{
+ int i;
+
+ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
+ GAFR_L(i) = saved_gafr[0][i];
+ GAFR_U(i) = saved_gafr[1][i];
+ GPSR(i * 32) = saved_gplr[i];
+ GPCR(i * 32) = ~saved_gplr[i];
+ GPDR(i * 32) = saved_gpdr[i];
+ PGSR(i) = saved_pgsr[i];
+ }
+ PSSR = PSSR_RDH | PSSR_PH;
+}
+#else
+#define pxa2xx_mfp_suspend NULL
+#define pxa2xx_mfp_resume NULL
+#endif
+
+struct syscore_ops pxa2xx_mfp_syscore_ops = {
+ .suspend = pxa2xx_mfp_suspend,
+ .resume = pxa2xx_mfp_resume,
+};
+
+static int __init pxa2xx_mfp_init(void)
+{
+ int i;
+
+ if (!cpu_is_pxa2xx())
+ return 0;
+
+ if (cpu_is_pxa25x())
+ pxa25x_mfp_init();
+
+ if (cpu_is_pxa27x())
+ pxa27x_mfp_init();
+
+ /* clear RDH bit to enable GPIO receivers after reset/sleep exit */
+ PSSR = PSSR_RDH;
+
+ /* initialize gafr_run[], pgsr_lpm[] from existing values */
+ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
+ gpdr_lpm[i] = GPDR(i * 32);
+
+ return 0;
+}
+postcore_initcall(pxa2xx_mfp_init);
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.h b/arch/arm/mach-pxa/mfp-pxa2xx.h
new file mode 100644
index 0000000..980145e
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_MFP_PXA2XX_H
+#define __ASM_ARCH_MFP_PXA2XX_H
+
+#include <plat/mfp.h>
+
+/*
+ * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
+ *
+ * MFP_PIN(x)
+ * MFP_AFx
+ * MFP_LPM_DRIVE_{LOW, HIGH}
+ * MFP_LPM_EDGE_x
+ *
+ * other MFP_x bit definitions will be ignored
+ *
+ * and adds the below two bits specifically for pxa2xx:
+ *
+ * bit 23 - Input/Output (PXA2xx specific)
+ * bit 24 - Wakeup Enable(PXA2xx specific)
+ * bit 25 - Keep Output (PXA2xx specific)
+ */
+
+#define MFP_DIR_IN (0x0 << 23)
+#define MFP_DIR_OUT (0x1 << 23)
+#define MFP_DIR_MASK (0x1 << 23)
+#define MFP_DIR(x) (((x) >> 23) & 0x1)
+
+#define MFP_LPM_CAN_WAKEUP (0x1 << 24)
+
+/*
+ * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
+ * retain their last output level (low or high).
+ * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
+ */
+#define MFP_LPM_KEEP_OUTPUT (0x1 << 25)
+
+#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
+#define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
+#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
+
+/* specifically for enabling wakeup on keypad GPIOs */
+#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_CAN_WAKEUP)
+
+#define MFP_CFG_IN(pin, af) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
+
+/* NOTE: pins configured as output _must_ provide a low power state,
+ * and this state should help to minimize the power dissipation.
+ */
+#define MFP_CFG_OUT(pin, af, state) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Common configurations for pxa25x and pxa27x
+ *
+ * Note: pins configured as GPIO are always initialized to input
+ * so not to cause any side effect
+ */
+#define GPIO0_GPIO MFP_CFG_IN(GPIO0, AF0)
+#define GPIO1_GPIO MFP_CFG_IN(GPIO1, AF0)
+#define GPIO9_GPIO MFP_CFG_IN(GPIO9, AF0)
+#define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0)
+#define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0)
+#define GPIO12_GPIO MFP_CFG_IN(GPIO12, AF0)
+#define GPIO13_GPIO MFP_CFG_IN(GPIO13, AF0)
+#define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0)
+#define GPIO15_GPIO MFP_CFG_IN(GPIO15, AF0)
+#define GPIO16_GPIO MFP_CFG_IN(GPIO16, AF0)
+#define GPIO17_GPIO MFP_CFG_IN(GPIO17, AF0)
+#define GPIO18_GPIO MFP_CFG_IN(GPIO18, AF0)
+#define GPIO19_GPIO MFP_CFG_IN(GPIO19, AF0)
+#define GPIO20_GPIO MFP_CFG_IN(GPIO20, AF0)
+#define GPIO21_GPIO MFP_CFG_IN(GPIO21, AF0)
+#define GPIO22_GPIO MFP_CFG_IN(GPIO22, AF0)
+#define GPIO23_GPIO MFP_CFG_IN(GPIO23, AF0)
+#define GPIO24_GPIO MFP_CFG_IN(GPIO24, AF0)
+#define GPIO25_GPIO MFP_CFG_IN(GPIO25, AF0)
+#define GPIO26_GPIO MFP_CFG_IN(GPIO26, AF0)
+#define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0)
+#define GPIO28_GPIO MFP_CFG_IN(GPIO28, AF0)
+#define GPIO29_GPIO MFP_CFG_IN(GPIO29, AF0)
+#define GPIO30_GPIO MFP_CFG_IN(GPIO30, AF0)
+#define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0)
+#define GPIO32_GPIO MFP_CFG_IN(GPIO32, AF0)
+#define GPIO33_GPIO MFP_CFG_IN(GPIO33, AF0)
+#define GPIO34_GPIO MFP_CFG_IN(GPIO34, AF0)
+#define GPIO35_GPIO MFP_CFG_IN(GPIO35, AF0)
+#define GPIO36_GPIO MFP_CFG_IN(GPIO36, AF0)
+#define GPIO37_GPIO MFP_CFG_IN(GPIO37, AF0)
+#define GPIO38_GPIO MFP_CFG_IN(GPIO38, AF0)
+#define GPIO39_GPIO MFP_CFG_IN(GPIO39, AF0)
+#define GPIO40_GPIO MFP_CFG_IN(GPIO40, AF0)
+#define GPIO41_GPIO MFP_CFG_IN(GPIO41, AF0)
+#define GPIO42_GPIO MFP_CFG_IN(GPIO42, AF0)
+#define GPIO43_GPIO MFP_CFG_IN(GPIO43, AF0)
+#define GPIO44_GPIO MFP_CFG_IN(GPIO44, AF0)
+#define GPIO45_GPIO MFP_CFG_IN(GPIO45, AF0)
+#define GPIO46_GPIO MFP_CFG_IN(GPIO46, AF0)
+#define GPIO47_GPIO MFP_CFG_IN(GPIO47, AF0)
+#define GPIO48_GPIO MFP_CFG_IN(GPIO48, AF0)
+#define GPIO49_GPIO MFP_CFG_IN(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG_IN(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG_IN(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG_IN(GPIO52, AF0)
+#define GPIO53_GPIO MFP_CFG_IN(GPIO53, AF0)
+#define GPIO54_GPIO MFP_CFG_IN(GPIO54, AF0)
+#define GPIO55_GPIO MFP_CFG_IN(GPIO55, AF0)
+#define GPIO56_GPIO MFP_CFG_IN(GPIO56, AF0)
+#define GPIO57_GPIO MFP_CFG_IN(GPIO57, AF0)
+#define GPIO58_GPIO MFP_CFG_IN(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG_IN(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG_IN(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG_IN(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG_IN(GPIO62, AF0)
+#define GPIO63_GPIO MFP_CFG_IN(GPIO63, AF0)
+#define GPIO64_GPIO MFP_CFG_IN(GPIO64, AF0)
+#define GPIO65_GPIO MFP_CFG_IN(GPIO65, AF0)
+#define GPIO66_GPIO MFP_CFG_IN(GPIO66, AF0)
+#define GPIO67_GPIO MFP_CFG_IN(GPIO67, AF0)
+#define GPIO68_GPIO MFP_CFG_IN(GPIO68, AF0)
+#define GPIO69_GPIO MFP_CFG_IN(GPIO69, AF0)
+#define GPIO70_GPIO MFP_CFG_IN(GPIO70, AF0)
+#define GPIO71_GPIO MFP_CFG_IN(GPIO71, AF0)
+#define GPIO72_GPIO MFP_CFG_IN(GPIO72, AF0)
+#define GPIO73_GPIO MFP_CFG_IN(GPIO73, AF0)
+#define GPIO74_GPIO MFP_CFG_IN(GPIO74, AF0)
+#define GPIO75_GPIO MFP_CFG_IN(GPIO75, AF0)
+#define GPIO76_GPIO MFP_CFG_IN(GPIO76, AF0)
+#define GPIO77_GPIO MFP_CFG_IN(GPIO77, AF0)
+#define GPIO78_GPIO MFP_CFG_IN(GPIO78, AF0)
+#define GPIO79_GPIO MFP_CFG_IN(GPIO79, AF0)
+#define GPIO80_GPIO MFP_CFG_IN(GPIO80, AF0)
+#define GPIO81_GPIO MFP_CFG_IN(GPIO81, AF0)
+#define GPIO82_GPIO MFP_CFG_IN(GPIO82, AF0)
+#define GPIO83_GPIO MFP_CFG_IN(GPIO83, AF0)
+#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0)
+
+extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
+extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
+extern int gpio_set_wake(unsigned int gpio, unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/arch/arm/mach-pxa/mfp-pxa300.h b/arch/arm/mach-pxa/mfp-pxa300.h
new file mode 100644
index 0000000..5ee51e2
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp-pxa300.h
@@ -0,0 +1,575 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+ *
+ * PXA300/PXA310 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA300_H
+#define __ASM_ARCH_MFP_PXA300_H
+
+#include "mfp-pxa3xx.h"
+
+/* GPIO */
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF1)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF3)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF2)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF3)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF3)
+#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
+
+#ifdef CONFIG_CPU_PXA310
+#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0)
+#endif
+
+/* Chip Select */
+#define GPIO1_nCS2 MFP_CFG(GPIO1, AF1)
+#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1)
+
+/* AC97 */
+#define GPIO23_AC97_nACRESET MFP_CFG(GPIO23, AF1)
+#define GPIO24_AC97_SYSCLK MFP_CFG(GPIO24, AF1)
+#define GPIO29_AC97_BITCLK MFP_CFG(GPIO29, AF1)
+#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1)
+#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1)
+#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3)
+#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2)
+#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3)
+#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2)
+#define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1)
+#define GPIO28_AC97_SYNC MFP_CFG(GPIO28, AF1)
+
+/* I2C */
+#define GPIO21_I2C_SCL MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
+#define GPIO22_I2C_SDA MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO39_CI_DD_0 MFP_CFG_DRV(GPIO39, AF1, DS04X)
+#define GPIO40_CI_DD_1 MFP_CFG_DRV(GPIO40, AF1, DS04X)
+#define GPIO41_CI_DD_2 MFP_CFG_DRV(GPIO41, AF1, DS04X)
+#define GPIO42_CI_DD_3 MFP_CFG_DRV(GPIO42, AF1, DS04X)
+#define GPIO43_CI_DD_4 MFP_CFG_DRV(GPIO43, AF1, DS04X)
+#define GPIO44_CI_DD_5 MFP_CFG_DRV(GPIO44, AF1, DS04X)
+#define GPIO45_CI_DD_6 MFP_CFG_DRV(GPIO45, AF1, DS04X)
+#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X)
+#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X)
+#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X)
+#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X)
+#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X)
+#define GPIO51_CI_HSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO52_CI_VSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X)
+
+/* KEYPAD */
+#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT)
+#define GPIO4_KP_DKIN_7 MFP_CFG_LPM(GPIO4, AF2, FLOAT)
+#define GPIO16_KP_DKIN_6 MFP_CFG_LPM(GPIO16, AF6, FLOAT)
+#define GPIO83_KP_DKIN_2 MFP_CFG_LPM(GPIO83, AF5, FLOAT)
+#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF5, FLOAT)
+#define GPIO85_KP_DKIN_0 MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_1 MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+#define GPIO87_KP_DKIN_2 MFP_CFG_LPM(GPIO87, AF3, FLOAT)
+#define GPIO88_KP_DKIN_3 MFP_CFG_LPM(GPIO88, AF3, FLOAT)
+#define GPIO89_KP_DKIN_3 MFP_CFG_LPM(GPIO89, AF3, FLOAT)
+#define GPIO107_KP_DKIN_0 MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_1 MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_2 MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_3 MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_4 MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_5 MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+#define GPIO113_KP_DKIN_6 MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_7 MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_0 MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_1 MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_2 MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_3 MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_4 MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_5 MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF5, FLOAT)
+#define GPIO0_2_KP_DKIN_0 MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+#define GPIO1_2_KP_DKIN_1 MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
+#define GPIO2_2_KP_DKIN_6 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_7 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_1 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+#define GPIO5_2_KP_DKIN_0 MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
+
+#define GPIO5_KP_MKIN_0 MFP_CFG_LPM(GPIO5, AF2, FLOAT)
+#define GPIO6_KP_MKIN_1 MFP_CFG_LPM(GPIO6, AF2, FLOAT)
+#define GPIO9_KP_MKIN_6 MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO70_KP_MKIN_6 MFP_CFG_LPM(GPIO70, AF3, FLOAT)
+#define GPIO71_KP_MKIN_7 MFP_CFG_LPM(GPIO71, AF3, FLOAT)
+#define GPIO100_KP_MKIN_6 MFP_CFG_LPM(GPIO100, AF7, FLOAT)
+#define GPIO101_KP_MKIN_7 MFP_CFG_LPM(GPIO101, AF7, FLOAT)
+#define GPIO112_KP_MKIN_6 MFP_CFG_LPM(GPIO112, AF4, FLOAT)
+#define GPIO113_KP_MKIN_7 MFP_CFG_LPM(GPIO113, AF4, FLOAT)
+#define GPIO115_KP_MKIN_0 MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_1 MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_2 MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_3 MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_4 MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_5 MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+#define GPIO125_KP_MKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO2_2_KP_MKIN_6 MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
+#define GPIO3_2_KP_MKIN_7 MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
+
+#define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH)
+#define GPIO12_KP_MKOUT_6 MFP_CFG_LPM(GPIO12, AF3, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_7 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO19_KP_MKOUT_4 MFP_CFG_LPM(GPIO19, AF3, DRIVE_HIGH)
+#define GPIO20_KP_MKOUT_5 MFP_CFG_LPM(GPIO20, AF3, DRIVE_HIGH)
+#define GPIO38_KP_MKOUT_5 MFP_CFG_LPM(GPIO38, AF5, DRIVE_HIGH)
+#define GPIO53_KP_MKOUT_6 MFP_CFG_LPM(GPIO53, AF5, DRIVE_HIGH)
+#define GPIO78_KP_MKOUT_7 MFP_CFG_LPM(GPIO78, AF5, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_0 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_1 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO87_KP_MKOUT_2 MFP_CFG_LPM(GPIO87, AF2, DRIVE_HIGH)
+#define GPIO88_KP_MKOUT_3 MFP_CFG_LPM(GPIO88, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_6 MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_7 MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
+#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_7 MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_6 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+#define GPIO4_2_KP_MKOUT_5 MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
+#define GPIO6_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO54_LCD_LDD_0 MFP_CFG_DRV(GPIO54, AF1, DS01X)
+#define GPIO55_LCD_LDD_1 MFP_CFG_DRV(GPIO55, AF1, DS01X)
+#define GPIO56_LCD_LDD_2 MFP_CFG_DRV(GPIO56, AF1, DS01X)
+#define GPIO57_LCD_LDD_3 MFP_CFG_DRV(GPIO57, AF1, DS01X)
+#define GPIO58_LCD_LDD_4 MFP_CFG_DRV(GPIO58, AF1, DS01X)
+#define GPIO59_LCD_LDD_5 MFP_CFG_DRV(GPIO59, AF1, DS01X)
+#define GPIO60_LCD_LDD_6 MFP_CFG_DRV(GPIO60, AF1, DS01X)
+#define GPIO61_LCD_LDD_7 MFP_CFG_DRV(GPIO61, AF1, DS01X)
+#define GPIO62_LCD_LDD_8 MFP_CFG_DRV(GPIO62, AF1, DS01X)
+#define GPIO63_LCD_LDD_9 MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_10 MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_11 MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_12 MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_13 MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X)
+#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X)
+#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS02X)
+#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X)
+#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X)
+
+#define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X)
+#define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X)
+#define GPIO63_LCD_VSYNC MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+/* Mini-LCD */
+#define GPIO72_MLCD_FCLK MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_LCLK MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO54_MLCD_LDD_0 MFP_CFG_DRV(GPIO54, AF7, DS08X)
+#define GPIO55_MLCD_LDD_1 MFP_CFG_DRV(GPIO55, AF7, DS08X)
+#define GPIO56_MLCD_LDD_2 MFP_CFG_DRV(GPIO56, AF7, DS08X)
+#define GPIO57_MLCD_LDD_3 MFP_CFG_DRV(GPIO57, AF7, DS08X)
+#define GPIO58_MLCD_LDD_4 MFP_CFG_DRV(GPIO58, AF7, DS08X)
+#define GPIO59_MLCD_LDD_5 MFP_CFG_DRV(GPIO59, AF7, DS08X)
+#define GPIO60_MLCD_LDD_6 MFP_CFG_DRV(GPIO60, AF7, DS08X)
+#define GPIO61_MLCD_LDD_7 MFP_CFG_DRV(GPIO61, AF7, DS08X)
+#define GPIO62_MLCD_LDD_8 MFP_CFG_DRV(GPIO62, AF7, DS08X)
+#define GPIO63_MLCD_LDD_9 MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_LDD_10 MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_LDD_11 MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_LDD_12 MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_LDD_13 MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_LDD_14 MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_LDD_15 MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO74_MLCD_PCLK MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO75_MLCD_BIAS MFP_CFG_DRV(GPIO75, AF2, DS08X)
+
+/* MMC1 */
+#define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH)
+#define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
+#define GPIO15_MMC1_CMD MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
+#define GPIO3_MMC1_DAT0 MFP_CFG_LPM(GPIO3, AF4, DRIVE_HIGH)
+#define GPIO4_MMC1_DAT1 MFP_CFG_LPM(GPIO4, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT2 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT3 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH)
+
+/* MMC2 */
+#define GPIO9_MMC2_DAT0 MFP_CFG_LPM(GPIO9, AF4, PULL_HIGH)
+#define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
+#define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
+#define GPIO12_MMC2_DAT3 MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
+#define GPIO13_MMC2_CLK MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
+#define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT0 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT1 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+#define GPIO79_MMC2_DAT2 MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_DAT3 MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+#define GPIO81_MMC2_CLK MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
+#define GPIO82_MMC2_CMD MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
+
+/* SSP1 */
+#define GPIO89_SSP1_EXTCLK MFP_CFG(GPIO89, AF1)
+#define GPIO90_SSP1_SYSCLK MFP_CFG(GPIO90, AF1)
+#define GPIO15_SSP1_SCLK MFP_CFG(GPIO15, AF6)
+#define GPIO16_SSP1_FRM MFP_CFG(GPIO16, AF2)
+#define GPIO33_SSP1_SCLK MFP_CFG(GPIO33, AF5)
+#define GPIO34_SSP1_FRM MFP_CFG(GPIO34, AF5)
+#define GPIO85_SSP1_SCLK MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_FRM MFP_CFG(GPIO86, AF1)
+#define GPIO18_SSP1_TXD MFP_CFG(GPIO18, AF7)
+#define GPIO18_SSP1_RXD MFP_CFG(GPIO18, AF2)
+#define GPIO20_SSP1_TXD MFP_CFG(GPIO20, AF2)
+#define GPIO20_SSP1_RXD MFP_CFG(GPIO20, AF7)
+#define GPIO35_SSP1_TXD MFP_CFG(GPIO35, AF5)
+#define GPIO35_SSP1_RXD MFP_CFG(GPIO35, AF4)
+#define GPIO36_SSP1_TXD MFP_CFG(GPIO36, AF5)
+#define GPIO36_SSP1_RXD MFP_CFG(GPIO36, AF6)
+#define GPIO87_SSP1_TXD MFP_CFG(GPIO87, AF1)
+#define GPIO87_SSP1_RXD MFP_CFG(GPIO87, AF6)
+#define GPIO88_SSP1_TXD MFP_CFG(GPIO88, AF6)
+#define GPIO88_SSP1_RXD MFP_CFG(GPIO88, AF1)
+
+/* SSP2 */
+#define GPIO29_SSP2_EXTCLK MFP_CFG(GPIO29, AF2)
+#define GPIO23_SSP2_SCLK MFP_CFG(GPIO23, AF2)
+#define GPIO17_SSP2_FRM MFP_CFG(GPIO17, AF2)
+#define GPIO25_SSP2_SCLK MFP_CFG(GPIO25, AF2)
+#define GPIO26_SSP2_FRM MFP_CFG(GPIO26, AF2)
+#define GPIO33_SSP2_SCLK MFP_CFG(GPIO33, AF6)
+#define GPIO34_SSP2_FRM MFP_CFG(GPIO34, AF6)
+#define GPIO64_SSP2_SCLK MFP_CFG(GPIO64, AF2)
+#define GPIO65_SSP2_FRM MFP_CFG(GPIO65, AF2)
+#define GPIO19_SSP2_TXD MFP_CFG(GPIO19, AF2)
+#define GPIO19_SSP2_RXD MFP_CFG(GPIO19, AF7)
+#define GPIO24_SSP2_TXD MFP_CFG(GPIO24, AF5)
+#define GPIO24_SSP2_RXD MFP_CFG(GPIO24, AF4)
+#define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2)
+#define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5)
+#define GPIO28_SSP2_TXD MFP_CFG(GPIO28, AF5)
+#define GPIO28_SSP2_RXD MFP_CFG(GPIO28, AF2)
+#define GPIO35_SSP2_TXD MFP_CFG(GPIO35, AF7)
+#define GPIO35_SSP2_RXD MFP_CFG(GPIO35, AF6)
+#define GPIO66_SSP2_TXD MFP_CFG(GPIO66, AF4)
+#define GPIO66_SSP2_RXD MFP_CFG(GPIO66, AF2)
+#define GPIO67_SSP2_TXD MFP_CFG(GPIO67, AF2)
+#define GPIO67_SSP2_RXD MFP_CFG(GPIO67, AF4)
+#define GPIO36_SSP2_TXD MFP_CFG(GPIO36, AF7)
+
+/* SSP3 */
+#define GPIO69_SSP3_FRM MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
+#define GPIO68_SSP3_SCLK MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
+#define GPIO92_SSP3_FRM MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_SCLK MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
+#define GPIO70_SSP3_TXD MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO70_SSP3_RXD MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
+#define GPIO93_SSP3_TXD MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
+#define GPIO93_SSP3_RXD MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
+#define GPIO94_SSP3_TXD MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
+#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+/* SSP4 */
+#define GPIO95_SSP4_SCLK MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_FRM MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO97_SSP4_TXD MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
+#define GPIO97_SSP4_RXD MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
+#define GPIO98_SSP4_TXD MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
+#define GPIO98_SSP4_RXD MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
+
+/* UART1 */
+#define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT)
+#define GPIO37_UART1_CTS MFP_CFG_LPM(GPIO37, AF4, FLOAT)
+#define GPIO79_UART1_CTS MFP_CFG_LPM(GPIO79, AF1, FLOAT)
+#define GPIO84_UART1_CTS MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO101_UART1_CTS MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO106_UART1_CTS MFP_CFG_LPM(GPIO106, AF6, FLOAT)
+
+#define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT)
+#define GPIO37_UART1_RTS MFP_CFG_LPM(GPIO37, AF2, FLOAT)
+#define GPIO79_UART1_RTS MFP_CFG_LPM(GPIO79, AF3, FLOAT)
+#define GPIO84_UART1_RTS MFP_CFG_LPM(GPIO84, AF1, FLOAT)
+#define GPIO101_UART1_RTS MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO106_UART1_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+
+#define GPIO34_UART1_DSR MFP_CFG_LPM(GPIO34, AF2, FLOAT)
+#define GPIO36_UART1_DSR MFP_CFG_LPM(GPIO36, AF4, FLOAT)
+#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF1, FLOAT)
+#define GPIO83_UART1_DSR MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO105_UART1_DSR MFP_CFG_LPM(GPIO105, AF6, FLOAT)
+
+#define GPIO34_UART1_DTR MFP_CFG_LPM(GPIO34, AF4, FLOAT)
+#define GPIO36_UART1_DTR MFP_CFG_LPM(GPIO36, AF2, FLOAT)
+#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF3, FLOAT)
+#define GPIO83_UART1_DTR MFP_CFG_LPM(GPIO83, AF1, FLOAT)
+#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO105_UART1_DTR MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+
+#define GPIO35_UART1_RI MFP_CFG_LPM(GPIO35, AF2, FLOAT)
+#define GPIO82_UART1_RI MFP_CFG_LPM(GPIO82, AF1, FLOAT)
+#define GPIO104_UART1_RI MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+
+#define GPIO33_UART1_DCD MFP_CFG_LPM(GPIO33, AF2, FLOAT)
+#define GPIO80_UART1_DCD MFP_CFG_LPM(GPIO80, AF1, FLOAT)
+#define GPIO102_UART1_DCD MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+#define GPIO30_UART1_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT)
+#define GPIO77_UART1_RXD MFP_CFG_LPM(GPIO77, AF1, FLOAT)
+#define GPIO78_UART1_RXD MFP_CFG_LPM(GPIO78, AF3, FLOAT)
+#define GPIO99_UART1_RXD MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO100_UART1_RXD MFP_CFG_LPM(GPIO100, AF6, FLOAT)
+#define GPIO102_UART1_RXD MFP_CFG_LPM(GPIO102, AF6, FLOAT)
+#define GPIO104_UART1_RXD MFP_CFG_LPM(GPIO104, AF4, FLOAT)
+
+#define GPIO30_UART1_TXD MFP_CFG_LPM(GPIO30, AF4, FLOAT)
+#define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO77_UART1_TXD MFP_CFG_LPM(GPIO77, AF3, FLOAT)
+#define GPIO78_UART1_TXD MFP_CFG_LPM(GPIO78, AF1, FLOAT)
+#define GPIO99_UART1_TXD MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO100_UART1_TXD MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO102_UART1_TXD MFP_CFG_LPM(GPIO102, AF4, FLOAT)
+
+/* UART2 */
+#define GPIO15_UART2_CTS MFP_CFG_LPM(GPIO15, AF3, FLOAT)
+#define GPIO16_UART2_CTS MFP_CFG_LPM(GPIO16, AF5, FLOAT)
+#define GPIO111_UART2_CTS MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO114_UART2_CTS MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+
+#define GPIO15_UART2_RTS MFP_CFG_LPM(GPIO15, AF4, FLOAT)
+#define GPIO16_UART2_RTS MFP_CFG_LPM(GPIO16, AF4, FLOAT)
+#define GPIO114_UART2_RTS MFP_CFG_LPM(GPIO114, AF3, FLOAT)
+#define GPIO111_UART2_RTS MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+#define GPIO18_UART2_RXD MFP_CFG_LPM(GPIO18, AF5, FLOAT)
+#define GPIO19_UART2_RXD MFP_CFG_LPM(GPIO19, AF4, FLOAT)
+#define GPIO112_UART2_RXD MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO113_UART2_RXD MFP_CFG_LPM(GPIO113, AF3, FLOAT)
+
+#define GPIO18_UART2_TXD MFP_CFG_LPM(GPIO18, AF4, FLOAT)
+#define GPIO19_UART2_TXD MFP_CFG_LPM(GPIO19, AF5, FLOAT)
+#define GPIO112_UART2_TXD MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO113_UART2_TXD MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO91_UART3_CTS MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_CTS MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_CTS MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_CTS MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+#define GPIO91_UART3_RTS MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO92_UART3_RTS MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO107_UART3_RTS MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO108_UART3_RTS MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+
+#define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT)
+#define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT)
+#define GPIO93_UART3_RXD MFP_CFG_LPM(GPIO93, AF4, FLOAT)
+#define GPIO94_UART3_RXD MFP_CFG_LPM(GPIO94, AF2, FLOAT)
+#define GPIO109_UART3_RXD MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO110_UART3_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+
+#define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT)
+#define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT)
+#define GPIO93_UART3_TXD MFP_CFG_LPM(GPIO93, AF2, FLOAT)
+#define GPIO94_UART3_TXD MFP_CFG_LPM(GPIO94, AF4, FLOAT)
+#define GPIO109_UART3_TXD MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO110_UART3_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+
+/* USB Host */
+#define GPIO0_2_USBH_PEN MFP_CFG(GPIO0_2, AF1)
+#define GPIO1_2_USBH_PWR MFP_CFG(GPIO1_2, AF1)
+
+/* USB P3 */
+#define GPIO77_USB_P3_1 MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_2 MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_3 MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_4 MFP_CFG(GPIO80, AF2)
+#define GPIO81_USB_P3_5 MFP_CFG(GPIO81, AF2)
+#define GPIO82_USB_P3_6 MFP_CFG(GPIO82, AF2)
+
+/* PWM */
+#define GPIO17_PWM0_OUT MFP_CFG(GPIO17, AF1)
+#define GPIO18_PWM1_OUT MFP_CFG(GPIO18, AF1)
+#define GPIO19_PWM2_OUT MFP_CFG(GPIO19, AF1)
+#define GPIO20_PWM3_OUT MFP_CFG(GPIO20, AF1)
+
+/* CIR */
+#define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5)
+#define GPIO16_CIR_OUT MFP_CFG(GPIO16, AF3)
+
+#define GPIO20_OW_DQ_IN MFP_CFG(GPIO20, AF5)
+#define GPIO126_OW_DQ MFP_CFG(GPIO126, AF2)
+
+#define GPIO0_DF_RDY MFP_CFG(GPIO0, AF1)
+#define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7)
+#define GPIO17_EXT_SYNC_MVT_0 MFP_CFG(GPIO17, AF6)
+#define GPIO18_EXT_SYNC_MVT_1 MFP_CFG(GPIO18, AF6)
+#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6)
+#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6)
+#define GPIO49_48M_CLK MFP_CFG(GPIO49, AF2)
+#define GPIO126_EXT_CLK MFP_CFG(GPIO126, AF3)
+#define GPIO127_CLK_BYPASS_GB MFP_CFG(GPIO127, AF7)
+#define GPIO71_EXT_MATCH_MVT MFP_CFG(GPIO71, AF6)
+
+#define GPIO3_uIO_IN MFP_CFG(GPIO3, AF1)
+
+#define GPIO4_uSIM_CARD_STATE MFP_CFG(GPIO4, AF1)
+#define GPIO5_uSIM_uCLK MFP_CFG(GPIO5, AF1)
+#define GPIO6_uSIM_uRST MFP_CFG(GPIO6, AF1)
+#define GPIO16_uSIM_UVS_0 MFP_CFG(GPIO16, AF1)
+
+#define GPIO9_SCIO MFP_CFG(GPIO9, AF1)
+#define GPIO20_RTC_MVT MFP_CFG(GPIO20, AF4)
+#define GPIO126_RTC_MVT MFP_CFG(GPIO126, AF1)
+
+/*
+ * PXA300 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA300
+#define GPIO99_USB_P2_2 MFP_CFG(GPIO99, AF2)
+#define GPIO99_USB_P2_5 MFP_CFG(GPIO99, AF3)
+#define GPIO99_USB_P2_6 MFP_CFG(GPIO99, AF4)
+#define GPIO100_USB_P2_2 MFP_CFG(GPIO100, AF4)
+#define GPIO100_USB_P2_5 MFP_CFG(GPIO100, AF5)
+#define GPIO101_USB_P2_1 MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_4 MFP_CFG(GPIO102, AF2)
+#define GPIO104_USB_P2_3 MFP_CFG(GPIO104, AF2)
+#define GPIO105_USB_P2_5 MFP_CFG(GPIO105, AF2)
+#define GPIO100_USB_P2_6 MFP_CFG(GPIO100, AF2)
+#define GPIO106_USB_P2_7 MFP_CFG(GPIO106, AF2)
+#define GPIO103_USB_P2_8 MFP_CFG(GPIO103, AF2)
+
+/* U2D UTMI */
+#define GPIO38_UTM_CLK MFP_CFG(GPIO38, AF1)
+#define GPIO26_U2D_RXERROR MFP_CFG(GPIO26, AF3)
+#define GPIO50_U2D_RXERROR MFP_CFG(GPIO50, AF1)
+#define GPIO89_U2D_RXERROR MFP_CFG(GPIO89, AF5)
+#define GPIO24_UTM_RXVALID MFP_CFG(GPIO24, AF3)
+#define GPIO48_UTM_RXVALID MFP_CFG(GPIO48, AF2)
+#define GPIO87_UTM_RXVALID MFP_CFG(GPIO87, AF5)
+#define GPIO25_UTM_RXACTIVE MFP_CFG(GPIO25, AF3)
+#define GPIO47_UTM_RXACTIVE MFP_CFG(GPIO47, AF2)
+#define GPIO49_UTM_RXACTIVE MFP_CFG(GPIO49, AF1)
+#define GPIO88_UTM_RXACTIVE MFP_CFG(GPIO88, AF5)
+#define GPIO53_UTM_TXREADY MFP_CFG(GPIO53, AF1)
+#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67, AF3)
+#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92, AF3)
+#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3)
+#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4)
+#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68, AF3)
+#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93, AF3)
+#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3)
+#define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4)
+#define GPIO51_U2D_OPMODE_0 MFP_CFG(GPIO51, AF2)
+#define GPIO90_U2D_OPMODE_0 MFP_CFG(GPIO90, AF7)
+#define GPIO28_U2D_OPMODE_1 MFP_CFG(GPIO28, AF4)
+#define GPIO52_U2D_OPMODE_1 MFP_CFG(GPIO52, AF2)
+#define GPIO106_U2D_OPMODE_1 MFP_CFG(GPIO106, AF3)
+#define GPIO110_U2D_OPMODE_1 MFP_CFG(GPIO110, AF5)
+#define GPIO76_U2D_RESET MFP_CFG(GPIO76, AF1)
+#define GPIO95_U2D_RESET MFP_CFG(GPIO95, AF2)
+#define GPIO100_U2D_RESET MFP_CFG(GPIO100, AF3)
+#define GPIO66_U2D_SUSPEND MFP_CFG(GPIO66, AF3)
+#define GPIO98_U2D_SUSPEND MFP_CFG(GPIO98, AF2)
+#define GPIO103_U2D_SUSPEND MFP_CFG(GPIO103, AF3)
+#define GPIO65_U2D_TERM_SEL MFP_CFG(GPIO65, AF5)
+#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF3)
+#define GPIO102_U2D_TERM_SEL MFP_CFG(GPIO102, AF5)
+#define GPIO29_U2D_TXVALID MFP_CFG(GPIO29, AF3)
+#define GPIO52_U2D_TXVALID MFP_CFG(GPIO52, AF4)
+#define GPIO69_U2D_TXVALID MFP_CFG(GPIO69, AF3)
+#define GPIO85_U2D_TXVALID MFP_CFG(GPIO85, AF7)
+#define GPIO64_U2D_XCVR_SEL MFP_CFG(GPIO64, AF5)
+#define GPIO96_U2D_XCVR_SEL MFP_CFG(GPIO96, AF3)
+#define GPIO101_U2D_XCVR_SEL MFP_CFG(GPIO101, AF5)
+#define GPIO30_UTM_PHYDATA_0 MFP_CFG(GPIO30, AF3)
+#define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3)
+#define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3)
+#define GPIO33_UTM_PHYDATA_3 MFP_CFG(GPIO33, AF3)
+#define GPIO34_UTM_PHYDATA_4 MFP_CFG(GPIO34, AF3)
+#define GPIO35_UTM_PHYDATA_5 MFP_CFG(GPIO35, AF3)
+#define GPIO36_UTM_PHYDATA_6 MFP_CFG(GPIO36, AF3)
+#define GPIO37_UTM_PHYDATA_7 MFP_CFG(GPIO37, AF3)
+#define GPIO39_UTM_PHYDATA_0 MFP_CFG(GPIO39, AF3)
+#define GPIO40_UTM_PHYDATA_1 MFP_CFG(GPIO40, AF3)
+#define GPIO41_UTM_PHYDATA_2 MFP_CFG(GPIO41, AF3)
+#define GPIO42_UTM_PHYDATA_3 MFP_CFG(GPIO42, AF3)
+#define GPIO43_UTM_PHYDATA_4 MFP_CFG(GPIO43, AF3)
+#define GPIO44_UTM_PHYDATA_5 MFP_CFG(GPIO44, AF3)
+#define GPIO45_UTM_PHYDATA_6 MFP_CFG(GPIO45, AF3)
+#define GPIO46_UTM_PHYDATA_7 MFP_CFG(GPIO46, AF3)
+#endif /* CONFIG_CPU_PXA300 */
+
+/*
+ * PXA310 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA310
+/* USB P2 */
+#define GPIO36_USB_P2_1 MFP_CFG(GPIO36, AF1)
+#define GPIO30_USB_P2_2 MFP_CFG(GPIO30, AF1)
+#define GPIO35_USB_P2_3 MFP_CFG(GPIO35, AF1)
+#define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1)
+#define GPIO34_USB_P2_5 MFP_CFG(GPIO34, AF1)
+#define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1)
+
+/* MMC1 */
+#define GPIO24_MMC1_CMD MFP_CFG(GPIO24, AF3)
+#define GPIO29_MMC1_DAT0 MFP_CFG(GPIO29, AF3)
+
+/* MMC3 */
+#define GPIO103_MMC3_CLK MFP_CFG(GPIO103, AF2)
+#define GPIO105_MMC3_CMD MFP_CFG(GPIO105, AF2)
+#define GPIO11_2_MMC3_CLK MFP_CFG(GPIO11_2, AF1)
+#define GPIO12_2_MMC3_CMD MFP_CFG(GPIO12_2, AF1)
+#define GPIO7_2_MMC3_DAT0 MFP_CFG(GPIO7_2, AF1)
+#define GPIO8_2_MMC3_DAT1 MFP_CFG(GPIO8_2, AF1)
+#define GPIO9_2_MMC3_DAT2 MFP_CFG(GPIO9_2, AF1)
+#define GPIO10_2_MMC3_DAT3 MFP_CFG(GPIO10_2, AF1)
+
+/* ULPI */
+#define GPIO38_ULPI_CLK MFP_CFG(GPIO38, AF1)
+#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3)
+#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3)
+#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3)
+#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3)
+#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3)
+#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3)
+#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3)
+#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3)
+#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1)
+
+#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
+#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
+#define ULPI_STP MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
+#endif /* CONFIG_CPU_PXA310 */
+
+#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/arch/arm/mach-pxa/mfp-pxa320.h b/arch/arm/mach-pxa/mfp-pxa320.h
new file mode 100644
index 0000000..e8797cf
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp-pxa320.h
@@ -0,0 +1,461 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+ *
+ * PXA320 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA320_H
+#define __ASM_ARCH_MFP_PXA320_H
+
+#include "mfp-pxa3xx.h"
+
+/* GPIO */
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
+
+#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0)
+#define GPIO13_2_GPIO MFP_CFG(GPIO13_2, AF0)
+#define GPIO14_2_GPIO MFP_CFG(GPIO14_2, AF0)
+#define GPIO15_2_GPIO MFP_CFG(GPIO15_2, AF0)
+#define GPIO16_2_GPIO MFP_CFG(GPIO16_2, AF0)
+#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0)
+
+/* Chip Select */
+#define GPIO3_nCS2 MFP_CFG(GPIO3, AF1)
+#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1)
+
+/* AC97 */
+#define GPIO34_AC97_SYSCLK MFP_CFG(GPIO34, AF1)
+#define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1)
+#define GPIO40_AC97_nACRESET MFP_CFG(GPIO40, AF1)
+#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1)
+#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1)
+#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2)
+#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2)
+#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3)
+#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3)
+#define GPIO37_AC97_SDATA_OUT MFP_CFG(GPIO37, AF1)
+#define GPIO38_AC97_SYNC MFP_CFG(GPIO38, AF1)
+
+/* I2C */
+#define GPIO32_I2C_SCL MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
+#define GPIO33_I2C_SDA MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO49_CI_DD_0 MFP_CFG_DRV(GPIO49, AF1, DS04X)
+#define GPIO50_CI_DD_1 MFP_CFG_DRV(GPIO50, AF1, DS04X)
+#define GPIO51_CI_DD_2 MFP_CFG_DRV(GPIO51, AF1, DS04X)
+#define GPIO52_CI_DD_3 MFP_CFG_DRV(GPIO52, AF1, DS04X)
+#define GPIO53_CI_DD_4 MFP_CFG_DRV(GPIO53, AF1, DS04X)
+#define GPIO54_CI_DD_5 MFP_CFG_DRV(GPIO54, AF1, DS04X)
+#define GPIO55_CI_DD_6 MFP_CFG_DRV(GPIO55, AF1, DS04X)
+#define GPIO56_CI_DD_7 MFP_CFG_DRV(GPIO56, AF0, DS04X)
+#define GPIO57_CI_DD_8 MFP_CFG_DRV(GPIO57, AF1, DS04X)
+#define GPIO58_CI_DD_9 MFP_CFG_DRV(GPIO58, AF1, DS04X)
+#define GPIO59_CI_MCLK MFP_CFG_DRV(GPIO59, AF0, DS04X)
+#define GPIO60_CI_PCLK MFP_CFG_DRV(GPIO60, AF0, DS04X)
+#define GPIO61_CI_HSYNC MFP_CFG_DRV(GPIO61, AF0, DS04X)
+#define GPIO62_CI_VSYNC MFP_CFG_DRV(GPIO62, AF0, DS04X)
+
+#define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5)
+
+#define GPIO0_2_CLK_EXT MFP_CFG(GPIO0_2, AF3)
+#define GPIO0_DRQ MFP_CFG(GPIO0, AF2)
+#define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5)
+#define GPIO12_EXT_SYNC1 MFP_CFG(GPIO12, AF6)
+#define GPIO0_2_HZ_CLK MFP_CFG(GPIO0_2, AF1)
+#define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4)
+#define GPIO30_ICP_RXD MFP_CFG(GPIO30, AF1)
+#define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1)
+
+#define GPIO83_KP_DKIN_0 MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO85_KP_DKIN_2 MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_3 MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+
+#define GPIO105_KP_DKIN_0 MFP_CFG_LPM(GPIO105, AF2, FLOAT)
+#define GPIO106_KP_DKIN_1 MFP_CFG_LPM(GPIO106, AF2, FLOAT)
+#define GPIO107_KP_DKIN_2 MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_3 MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_4 MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_5 MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_6 MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_7 MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+
+#define GPIO113_KP_DKIN_0 MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_1 MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_2 MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_3 MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_4 MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_5 MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_6 MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_7 MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+
+#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF2, FLOAT)
+#define GPIO126_KP_DKIN_1 MFP_CFG_LPM(GPIO126, AF2, FLOAT)
+
+#define GPIO2_2_KP_DKIN_0 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_1 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO125_KP_DKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_7 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+
+#define GPIO113_KP_MKIN_0 MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+#define GPIO114_KP_MKIN_1 MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+#define GPIO115_KP_MKIN_2 MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_3 MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_4 MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_5 MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_6 MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_7 MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+
+#define GPIO83_KP_MKOUT_0 MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO84_KP_MKOUT_1 MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_2 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_3 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_4 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
+
+#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_5 MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
+#define GPIO127_KP_MKOUT_6 MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO6_2_LCD_LDD_0 MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
+#define GPIO7_2_LCD_LDD_1 MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
+#define GPIO8_2_LCD_LDD_2 MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
+#define GPIO9_2_LCD_LDD_3 MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
+#define GPIO10_2_LCD_LDD_4 MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
+#define GPIO11_2_LCD_LDD_5 MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
+#define GPIO12_2_LCD_LDD_6 MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
+#define GPIO13_2_LCD_LDD_7 MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
+#define GPIO63_LCD_LDD_8 MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_9 MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_10 MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_11 MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_12 MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_13 MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_14 MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_15 MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_16 MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO72_LCD_LDD_17 MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_CS_N MFP_CFG_DRV(GPIO73, AF2, DS01X)
+#define GPIO74_LCD_VSYNC MFP_CFG_DRV(GPIO74, AF2, DS01X)
+#define GPIO14_2_LCD_FCLK MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
+#define GPIO15_2_LCD_LCLK MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
+#define GPIO16_2_LCD_PCLK MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
+#define GPIO17_2_LCD_BIAS MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
+#define GPIO64_LCD_VSYNC MFP_CFG_DRV(GPIO64, AF2, DS01X)
+#define GPIO63_LCD_CS_N MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+#define GPIO6_2_MLCD_DD_0 MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
+#define GPIO7_2_MLCD_DD_1 MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
+#define GPIO8_2_MLCD_DD_2 MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
+#define GPIO9_2_MLCD_DD_3 MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
+#define GPIO10_2_MLCD_DD_4 MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
+#define GPIO11_2_MLCD_DD_5 MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
+#define GPIO12_2_MLCD_DD_6 MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
+#define GPIO13_2_MLCD_DD_7 MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
+#define GPIO63_MLCD_DD_8 MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_DD_9 MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_DD_10 MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_DD_11 MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_DD_12 MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_DD_13 MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_DD_14 MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO70_MLCD_DD_15 MFP_CFG_DRV(GPIO70, AF7, DS08X)
+#define GPIO71_MLCD_DD_16 MFP_CFG_DRV(GPIO71, AF7, DS08X)
+#define GPIO72_MLCD_DD_17 MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_CS MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO74_MLCD_VSYNC MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO14_2_MLCD_FCLK MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
+#define GPIO15_2_MLCD_LCLK MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
+#define GPIO16_2_MLCD_PCLK MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
+#define GPIO17_2_MLCD_BIAS MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
+
+/* MMC1 */
+#define GPIO9_MMC1_CMD MFP_CFG_LPM(GPIO9, AF4, DRIVE_HIGH)
+#define GPIO22_MMC1_CLK MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
+#define GPIO23_MMC1_CMD MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
+#define GPIO30_MMC1_CLK MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
+#define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT0 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT1 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH)
+#define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH)
+#define GPIO18_MMC1_DAT0 MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
+#define GPIO19_MMC1_DAT1 MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
+#define GPIO20_MMC1_DAT2 MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
+#define GPIO21_MMC1_DAT3 MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
+
+#define GPIO28_MMC2_CLK MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
+#define GPIO29_MMC2_CMD MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
+#define GPIO30_MMC2_CLK MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
+#define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
+#define GPIO79_MMC2_CLK MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_CMD MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+
+#define GPIO5_MMC2_DAT0 MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
+#define GPIO6_MMC2_DAT1 MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
+#define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
+#define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
+#define GPIO24_MMC2_DAT0 MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
+#define GPIO75_MMC2_DAT0 MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
+#define GPIO25_MMC2_DAT1 MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
+#define GPIO76_MMC2_DAT1 MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
+#define GPIO26_MMC2_DAT2 MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT2 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO27_MMC2_DAT3 MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT3 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+
+/* 1-Wire */
+#define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT)
+#define GPIO0_2_ONE_WIRE MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+
+/* SSP1 */
+#define GPIO87_SSP1_EXTCLK MFP_CFG(GPIO87, AF1)
+#define GPIO88_SSP1_SYSCLK MFP_CFG(GPIO88, AF1)
+#define GPIO83_SSP1_SCLK MFP_CFG(GPIO83, AF1)
+#define GPIO84_SSP1_SFRM MFP_CFG(GPIO84, AF1)
+#define GPIO85_SSP1_RXD MFP_CFG(GPIO85, AF6)
+#define GPIO85_SSP1_TXD MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_RXD MFP_CFG(GPIO86, AF1)
+#define GPIO86_SSP1_TXD MFP_CFG(GPIO86, AF6)
+
+/* SSP2 */
+#define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2)
+#define GPIO40_SSP2_SYSCLK MFP_CFG(GPIO40, AF2)
+#define GPIO12_SSP2_SCLK MFP_CFG(GPIO12, AF2)
+#define GPIO35_SSP2_SCLK MFP_CFG(GPIO35, AF2)
+#define GPIO36_SSP2_SFRM MFP_CFG(GPIO36, AF2)
+#define GPIO37_SSP2_RXD MFP_CFG(GPIO37, AF5)
+#define GPIO37_SSP2_TXD MFP_CFG(GPIO37, AF2)
+#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2)
+#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5)
+
+#define GPIO69_SSP3_SCLK MFP_CFG_X(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK MFP_CFG_X(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM MFP_CFG_X(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
+#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
+#define GPIO72_SSP3_TXD MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_RXD MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
+#define GPIO91_SSP3_TXD MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
+#define GPIO92_SSP3_RXD MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
+#define GPIO92_SSP3_TXD MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
+
+#define GPIO93_SSP4_SCLK MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
+#define GPIO94_SSP4_FRM MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
+#define GPIO94_SSP4_RXD MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
+#define GPIO95_SSP4_RXD MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
+#define GPIO95_SSP4_TXD MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_RXD MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO96_SSP4_TXD MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
+
+/* UART1 */
+#define GPIO41_UART1_RXD MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO75_UART1_RXD MFP_CFG_LPM(GPIO75, AF1, FLOAT)
+#define GPIO76_UART1_RXD MFP_CFG_LPM(GPIO76, AF3, FLOAT)
+#define GPIO76_UART1_TXD MFP_CFG_LPM(GPIO76, AF1, FLOAT)
+#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT)
+#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT)
+#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT)
+#define GPIO98_UART1_TXD MFP_CFG_LPM(GPIO98, AF1, FLOAT)
+#define GPIO43_UART1_CTS MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT)
+#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT)
+#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO77_UART1_CTS MFP_CFG_LPM(GPIO77, AF1, FLOAT)
+#define GPIO82_UART1_RTS MFP_CFG_LPM(GPIO82, AF1, FLOAT)
+#define GPIO82_UART1_CTS MFP_CFG_LPM(GPIO82, AF3, FLOAT)
+#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT)
+#define GPIO104_UART1_RTS MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+#define GPIO45_UART1_DTR MFP_CFG_LPM(GPIO45, AF4, FLOAT)
+#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT)
+#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT)
+#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO79_UART1_DSR MFP_CFG_LPM(GPIO79, AF1, FLOAT)
+#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF1, FLOAT)
+#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF3, FLOAT)
+#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO78_UART1_DCD MFP_CFG_LPM(GPIO78, AF1, FLOAT)
+#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO80_UART1_RI MFP_CFG_LPM(GPIO80, AF1, FLOAT)
+#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+/* UART2 */
+#define GPIO109_UART2_CTS MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO109_UART2_RTS MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO112_UART2_CTS MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO112_UART2_RTS MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO110_UART2_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+#define GPIO110_UART2_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+#define GPIO111_UART2_RXD MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO111_UART2_TXD MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO89_UART3_CTS MFP_CFG_LPM(GPIO89, AF2, FLOAT)
+#define GPIO89_UART3_RTS MFP_CFG_LPM(GPIO89, AF4, FLOAT)
+#define GPIO90_UART3_CTS MFP_CFG_LPM(GPIO90, AF4, FLOAT)
+#define GPIO90_UART3_RTS MFP_CFG_LPM(GPIO90, AF2, FLOAT)
+#define GPIO105_UART3_CTS MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+#define GPIO105_UART3_RTS MFP_CFG_LPM(GPIO105, AF3, FLOAT)
+#define GPIO106_UART3_CTS MFP_CFG_LPM(GPIO106, AF3, FLOAT)
+#define GPIO106_UART3_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+#define GPIO30_UART3_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO30_UART3_TXD MFP_CFG_LPM(GPIO30, AF6, FLOAT)
+#define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT)
+#define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO91_UART3_RXD MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO91_UART3_TXD MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_RXD MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO92_UART3_TXD MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_RXD MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO107_UART3_TXD MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_RXD MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+#define GPIO108_UART3_TXD MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+
+/* USB 2.0 UTMI */
+#define GPIO10_UTM_CLK MFP_CFG(GPIO10, AF1)
+#define GPIO36_U2D_RXERROR MFP_CFG(GPIO36, AF3)
+#define GPIO60_U2D_RXERROR MFP_CFG(GPIO60, AF1)
+#define GPIO87_U2D_RXERROR MFP_CFG(GPIO87, AF5)
+#define GPIO34_UTM_RXVALID MFP_CFG(GPIO34, AF3)
+#define GPIO58_UTM_RXVALID MFP_CFG(GPIO58, AF2)
+#define GPIO85_UTM_RXVALID MFP_CFG(GPIO85, AF5)
+#define GPIO35_UTM_RXACTIVE MFP_CFG(GPIO35, AF3)
+#define GPIO59_UTM_RXACTIVE MFP_CFG(GPIO59, AF1)
+#define GPIO86_UTM_RXACTIVE MFP_CFG(GPIO86, AF5)
+#define GPIO73_UTM_TXREADY MFP_CFG(GPIO73, AF1)
+#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3)
+#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3)
+#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3)
+#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4)
+#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3)
+#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3)
+#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3)
+
+#define GPIO41_U2D_PHYDATA_0 MFP_CFG(GPIO41, AF3)
+#define GPIO42_U2D_PHYDATA_1 MFP_CFG(GPIO42, AF3)
+#define GPIO43_U2D_PHYDATA_2 MFP_CFG(GPIO43, AF3)
+#define GPIO44_U2D_PHYDATA_3 MFP_CFG(GPIO44, AF3)
+#define GPIO45_U2D_PHYDATA_4 MFP_CFG(GPIO45, AF3)
+#define GPIO46_U2D_PHYDATA_5 MFP_CFG(GPIO46, AF3)
+#define GPIO47_U2D_PHYDATA_6 MFP_CFG(GPIO47, AF3)
+#define GPIO48_U2D_PHYDATA_7 MFP_CFG(GPIO48, AF3)
+
+#define GPIO49_U2D_PHYDATA_0 MFP_CFG(GPIO49, AF3)
+#define GPIO50_U2D_PHYDATA_1 MFP_CFG(GPIO50, AF3)
+#define GPIO51_U2D_PHYDATA_2 MFP_CFG(GPIO51, AF3)
+#define GPIO52_U2D_PHYDATA_3 MFP_CFG(GPIO52, AF3)
+#define GPIO53_U2D_PHYDATA_4 MFP_CFG(GPIO53, AF3)
+#define GPIO54_U2D_PHYDATA_5 MFP_CFG(GPIO54, AF3)
+#define GPIO55_U2D_PHYDATA_6 MFP_CFG(GPIO55, AF3)
+#define GPIO56_U2D_PHYDATA_7 MFP_CFG(GPIO56, AF3)
+
+#define GPIO37_U2D_OPMODE0 MFP_CFG(GPIO37, AF4)
+#define GPIO61_U2D_OPMODE0 MFP_CFG(GPIO61, AF2)
+#define GPIO88_U2D_OPMODE0 MFP_CFG(GPIO88, AF7)
+
+#define GPIO38_U2D_OPMODE1 MFP_CFG(GPIO38, AF4)
+#define GPIO62_U2D_OPMODE1 MFP_CFG(GPIO62, AF2)
+#define GPIO104_U2D_OPMODE1 MFP_CFG(GPIO104, AF4)
+#define GPIO108_U2D_OPMODE1 MFP_CFG(GPIO108, AF5)
+
+#define GPIO74_U2D_RESET MFP_CFG(GPIO74, AF1)
+#define GPIO93_U2D_RESET MFP_CFG(GPIO93, AF2)
+#define GPIO98_U2D_RESET MFP_CFG(GPIO98, AF3)
+
+#define GPIO67_U2D_SUSPEND MFP_CFG(GPIO67, AF3)
+#define GPIO96_U2D_SUSPEND MFP_CFG(GPIO96, AF2)
+#define GPIO101_U2D_SUSPEND MFP_CFG(GPIO101, AF3)
+
+#define GPIO66_U2D_TERM_SEL MFP_CFG(GPIO66, AF5)
+#define GPIO95_U2D_TERM_SEL MFP_CFG(GPIO95, AF3)
+#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF7)
+#define GPIO100_U2D_TERM_SEL MFP_CFG(GPIO100, AF5)
+
+#define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4)
+#define GPIO70_U2D_TXVALID MFP_CFG(GPIO70, AF5)
+#define GPIO83_U2D_TXVALID MFP_CFG(GPIO83, AF7)
+
+#define GPIO65_U2D_XCVR_SEL MFP_CFG(GPIO65, AF5)
+#define GPIO94_U2D_XCVR_SEL MFP_CFG(GPIO94, AF3)
+#define GPIO99_U2D_XCVR_SEL MFP_CFG(GPIO99, AF5)
+
+/* USB Host 1.1 */
+#define GPIO2_2_USBH_PEN MFP_CFG(GPIO2_2, AF1)
+#define GPIO3_2_USBH_PWR MFP_CFG(GPIO3_2, AF1)
+
+/* USB P2 */
+#define GPIO97_USB_P2_2 MFP_CFG(GPIO97, AF2)
+#define GPIO97_USB_P2_6 MFP_CFG(GPIO97, AF4)
+#define GPIO98_USB_P2_2 MFP_CFG(GPIO98, AF4)
+#define GPIO98_USB_P2_6 MFP_CFG(GPIO98, AF2)
+#define GPIO99_USB_P2_1 MFP_CFG(GPIO99, AF2)
+#define GPIO100_USB_P2_4 MFP_CFG(GPIO100, AF2)
+#define GPIO101_USB_P2_8 MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_3 MFP_CFG(GPIO102, AF2)
+#define GPIO103_USB_P2_5 MFP_CFG(GPIO103, AF2)
+#define GPIO104_USB_P2_7 MFP_CFG(GPIO104, AF2)
+
+/* USB P3 */
+#define GPIO75_USB_P3_1 MFP_CFG(GPIO75, AF2)
+#define GPIO76_USB_P3_2 MFP_CFG(GPIO76, AF2)
+#define GPIO77_USB_P3_3 MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_4 MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_5 MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_6 MFP_CFG(GPIO80, AF2)
+
+#define GPIO13_CHOUT0 MFP_CFG(GPIO13, AF6)
+#define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6)
+
+#define GPIO2_RDY MFP_CFG(GPIO2, AF1)
+#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3)
+#define GPIO6_NPIOW MFP_CFG(GPIO6, AF3)
+#define GPIO7_NPIOS16 MFP_CFG(GPIO7, AF3)
+#define GPIO8_NPWAIT MFP_CFG(GPIO8, AF3)
+
+#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1)
+#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1)
+#define GPIO13_PWM2_OUT MFP_CFG(GPIO13, AF1)
+#define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1)
+
+#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
new file mode 100644
index 0000000..994edc0
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -0,0 +1,59 @@
+/*
+ * linux/arch/arm/mach-pxa/mfp.c
+ *
+ * PXA3xx Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <mach/hardware.h>
+#include "mfp-pxa3xx.h"
+#include <mach/pxa3xx-regs.h>
+
+#ifdef CONFIG_PM
+/*
+ * Configure the MFPs appropriately for suspend/resume.
+ * FIXME: this should probably depend on which system state we're
+ * entering - for instance, we might not want to place MFP pins in
+ * a pull-down mode if they're an active low chip select, and we're
+ * just entering standby.
+ */
+static int pxa3xx_mfp_suspend(void)
+{
+ mfp_config_lpm();
+ return 0;
+}
+
+static void pxa3xx_mfp_resume(void)
+{
+ mfp_config_run();
+
+ /* clear RDH bit when MFP settings are restored
+ *
+ * NOTE: the last 3 bits DxS are write-1-to-clear so carefully
+ * preserve them here in case they will be referenced later
+ */
+ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
+}
+#else
+#define pxa3xx_mfp_suspend NULL
+#define pxa3xx_mfp_resume NULL
+#endif
+
+struct syscore_ops pxa3xx_mfp_syscore_ops = {
+ .suspend = pxa3xx_mfp_suspend,
+ .resume = pxa3xx_mfp_resume,
+};
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.h b/arch/arm/mach-pxa/mfp-pxa3xx.h
new file mode 100644
index 0000000..cdd8309
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.h
@@ -0,0 +1,159 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_MFP_PXA3XX_H
+#define __ASM_ARCH_MFP_PXA3XX_H
+
+#include <plat/mfp.h>
+
+#define MFPR_BASE (0x40e10000)
+
+/* PXA3xx common MFP configurations - processor specific ones defined
+ * in mfp-pxa300.h and mfp-pxa320.h
+ */
+#define GPIO0_GPIO MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO MFP_CFG(GPIO45, AF0)
+
+#define GPIO47_GPIO MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO MFP_CFG(GPIO48, AF0)
+
+#define GPIO53_GPIO MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO MFP_CFG(GPIO55, AF0)
+
+#define GPIO57_GPIO MFP_CFG(GPIO57, AF0)
+
+#define GPIO63_GPIO MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO MFP_CFG(GPIO127, AF0)
+
+#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0)
+#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0)
+#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0)
+#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0)
+#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0)
+#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0)
+#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0)
+
+/* NOTE: usage of these two functions is not recommended,
+ * use pxa3xx_mfp_config() instead.
+ */
+static inline unsigned long pxa3xx_mfp_read(int mfp)
+{
+ return mfp_read(mfp);
+}
+
+static inline void pxa3xx_mfp_write(int mfp, unsigned long val)
+{
+ mfp_write(mfp, val);
+}
+
+static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num)
+{
+ mfp_config(mfp_cfg, num);
+}
+#endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/mfp-pxa930.h b/arch/arm/mach-pxa/mfp-pxa930.h
new file mode 100644
index 0000000..113967b
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp-pxa930.h
@@ -0,0 +1,498 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+ *
+ * PXA930 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA9xx_H
+#define __ASM_ARCH_MFP_PXA9xx_H
+
+#include "mfp-pxa3xx.h"
+
+/* GPIO */
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
+#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
+
+#define GSIM_UCLK_GPIO_79 MFP_CFG(GSIM_UCLK, AF0)
+#define GSIM_UIO_GPIO_80 MFP_CFG(GSIM_UIO, AF0)
+#define GSIM_nURST_GPIO_81 MFP_CFG(GSIM_nURST, AF0)
+#define GSIM_UDET_GPIO_82 MFP_CFG(GSIM_UDET, AF0)
+
+#define DF_IO15_GPIO_28 MFP_CFG(DF_IO15, AF0)
+#define DF_IO14_GPIO_29 MFP_CFG(DF_IO14, AF0)
+#define DF_IO13_GPIO_30 MFP_CFG(DF_IO13, AF0)
+#define DF_IO12_GPIO_31 MFP_CFG(DF_IO12, AF0)
+#define DF_IO11_GPIO_32 MFP_CFG(DF_IO11, AF0)
+#define DF_IO10_GPIO_33 MFP_CFG(DF_IO10, AF0)
+#define DF_IO9_GPIO_34 MFP_CFG(DF_IO9, AF0)
+#define DF_IO8_GPIO_35 MFP_CFG(DF_IO8, AF0)
+#define DF_IO7_GPIO_36 MFP_CFG(DF_IO7, AF0)
+#define DF_IO6_GPIO_37 MFP_CFG(DF_IO6, AF0)
+#define DF_IO5_GPIO_38 MFP_CFG(DF_IO5, AF0)
+#define DF_IO4_GPIO_39 MFP_CFG(DF_IO4, AF0)
+#define DF_IO3_GPIO_40 MFP_CFG(DF_IO3, AF0)
+#define DF_IO2_GPIO_41 MFP_CFG(DF_IO2, AF0)
+#define DF_IO1_GPIO_42 MFP_CFG(DF_IO1, AF0)
+#define DF_IO0_GPIO_43 MFP_CFG(DF_IO0, AF0)
+#define DF_nCS0_GPIO_44 MFP_CFG(DF_nCS0, AF0)
+#define DF_nCS1_GPIO_45 MFP_CFG(DF_nCS1, AF0)
+#define DF_nWE_GPIO_46 MFP_CFG(DF_nWE, AF0)
+#define DF_nRE_nOE_GPIO_47 MFP_CFG(DF_nRE_nOE, AF0)
+#define DF_CLE_nOE_GPIO_48 MFP_CFG(DF_CLE_nOE, AF0)
+#define DF_nADV1_ALE_GPIO_49 MFP_CFG(DF_nADV1_ALE, AF0)
+#define DF_nADV2_ALE_GPIO_50 MFP_CFG(DF_nADV2_ALE, AF0)
+#define DF_INT_RnB_GPIO_51 MFP_CFG(DF_INT_RnB, AF0)
+#define DF_SCLK_E_GPIO_52 MFP_CFG(DF_SCLK_E, AF0)
+
+#define DF_ADDR0_GPIO_53 MFP_CFG(DF_ADDR0, AF0)
+#define DF_ADDR1_GPIO_54 MFP_CFG(DF_ADDR1, AF0)
+#define DF_ADDR2_GPIO_55 MFP_CFG(DF_ADDR2, AF0)
+#define DF_ADDR3_GPIO_56 MFP_CFG(DF_ADDR3, AF0)
+#define nXCVREN_GPIO_57 MFP_CFG(nXCVREN, AF0)
+#define nLUA_GPIO_58 MFP_CFG(nLUA, AF0)
+#define nLLA_GPIO_59 MFP_CFG(nLLA, AF0)
+#define nBE0_GPIO_60 MFP_CFG(nBE0, AF0)
+#define nBE1_GPIO_61 MFP_CFG(nBE1, AF0)
+#define RDY_GPIO_62 MFP_CFG(RDY, AF0)
+#define PMIC_INT_GPIO83 MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
+
+/* Chip Select */
+#define DF_nCS0_nCS2 MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
+#define DF_nCS1_nCS3 MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
+
+/* AC97 */
+#define GPIO83_BAC97_SYSCLK MFP_CFG(GPIO83, AF3)
+#define GPIO84_BAC97_SDATA_IN0 MFP_CFG(GPIO84, AF3)
+#define GPIO85_BAC97_BITCLK MFP_CFG(GPIO85, AF3)
+#define GPIO86_BAC97_nRESET MFP_CFG(GPIO86, AF3)
+#define GPIO87_BAC97_SYNC MFP_CFG(GPIO87, AF3)
+#define GPIO88_BAC97_SDATA_OUT MFP_CFG(GPIO88, AF3)
+
+/* I2C */
+#define GPIO39_CI2C_SCL MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
+#define GPIO40_CI2C_SDA MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
+
+#define GPIO51_CI2C_SCL MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
+#define GPIO52_CI2C_SDA MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
+
+#define GPIO63_CI2C_SCL MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
+#define GPIO64_CI2C_SDA MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
+
+#define GPIO73_CI2C_SCL MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
+#define GPIO74_CI2C_SDA MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
+
+#define GPIO77_CI2C_SCL MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
+#define GPIO78_CI2C_SDA MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
+
+#define GPIO89_CI2C_SCL MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
+#define GPIO90_CI2C_SDA MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
+
+#define GPIO95_CI2C_SCL MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_CI2C_SDA MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+
+#define GPIO97_CI2C_SCL MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
+#define GPIO98_CI2C_SDA MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
+
+/* QCI */
+#define GPIO63_CI_DD_9 MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
+#define GPIO64_CI_DD_8 MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
+#define GPIO65_CI_DD_7 MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
+#define GPIO66_CI_DD_6 MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
+#define GPIO67_CI_DD_5 MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
+#define GPIO68_CI_DD_4 MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
+#define GPIO69_CI_DD_3 MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
+#define GPIO70_CI_DD_2 MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
+#define GPIO71_CI_DD_1 MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
+#define GPIO72_CI_DD_0 MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
+#define GPIO73_CI_HSYNC MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
+#define GPIO74_CI_VSYNC MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
+#define GPIO75_CI_MCLK MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
+#define GPIO76_CI_PCLK MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
+
+/* KEYPAD */
+#define GPIO4_KP_DKIN_4 MFP_CFG_LPM(GPIO4, AF3, FLOAT)
+#define GPIO5_KP_DKIN_5 MFP_CFG_LPM(GPIO5, AF3, FLOAT)
+#define GPIO6_KP_DKIN_6 MFP_CFG_LPM(GPIO6, AF3, FLOAT)
+#define GPIO7_KP_DKIN_7 MFP_CFG_LPM(GPIO7, AF3, FLOAT)
+#define GPIO8_KP_DKIN_4 MFP_CFG_LPM(GPIO8, AF3, FLOAT)
+#define GPIO9_KP_DKIN_5 MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_DKIN_6 MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO11_KP_DKIN_7 MFP_CFG_LPM(GPIO11, AF3, FLOAT)
+
+#define GPIO12_KP_DKIN_0 MFP_CFG_LPM(GPIO12, AF2, FLOAT)
+#define GPIO13_KP_DKIN_1 MFP_CFG_LPM(GPIO13, AF2, FLOAT)
+#define GPIO14_KP_DKIN_2 MFP_CFG_LPM(GPIO14, AF2, FLOAT)
+#define GPIO15_KP_DKIN_3 MFP_CFG_LPM(GPIO15, AF2, FLOAT)
+
+#define GPIO41_KP_DKIN_0 MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO42_KP_DKIN_1 MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO43_KP_DKIN_2 MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO44_KP_DKIN_3 MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO41_KP_DKIN_4 MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_KP_DKIN_5 MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+
+#define GPIO0_KP_MKIN_0 MFP_CFG_LPM(GPIO0, AF1, FLOAT)
+#define GPIO2_KP_MKIN_1 MFP_CFG_LPM(GPIO2, AF1, FLOAT)
+#define GPIO4_KP_MKIN_2 MFP_CFG_LPM(GPIO4, AF1, FLOAT)
+#define GPIO6_KP_MKIN_3 MFP_CFG_LPM(GPIO6, AF1, FLOAT)
+#define GPIO8_KP_MKIN_4 MFP_CFG_LPM(GPIO8, AF1, FLOAT)
+#define GPIO10_KP_MKIN_5 MFP_CFG_LPM(GPIO10, AF1, FLOAT)
+#define GPIO12_KP_MKIN_6 MFP_CFG_LPM(GPIO12, AF1, FLOAT)
+#define GPIO14_KP_MKIN_7 MFP_CFG(GPIO14, AF1)
+#define GPIO35_KP_MKIN_5 MFP_CFG(GPIO35, AF4)
+
+#define GPIO1_KP_MKOUT_0 MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
+#define GPIO3_KP_MKOUT_1 MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
+#define GPIO5_KP_MKOUT_2 MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
+#define GPIO7_KP_MKOUT_3 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO9_KP_MKOUT_4 MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_6 MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
+#define GPIO15_KP_MKOUT_7 MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO36_KP_MKOUT_5 MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO17_LCD_FCLK_RD MFP_CFG(GPIO17, AF1)
+#define GPIO18_LCD_LCLK_A0 MFP_CFG(GPIO18, AF1)
+#define GPIO19_LCD_PCLK_WR MFP_CFG(GPIO19, AF1)
+#define GPIO20_LCD_BIAS MFP_CFG(GPIO20, AF1)
+#define GPIO21_LCD_CS MFP_CFG(GPIO21, AF1)
+#define GPIO22_LCD_CS2 MFP_CFG(GPIO22, AF2)
+#define GPIO22_LCD_VSYNC MFP_CFG(GPIO22, AF1)
+#define GPIO23_LCD_DD0 MFP_CFG(GPIO23, AF1)
+#define GPIO24_LCD_DD1 MFP_CFG(GPIO24, AF1)
+#define GPIO25_LCD_DD2 MFP_CFG(GPIO25, AF1)
+#define GPIO26_LCD_DD3 MFP_CFG(GPIO26, AF1)
+#define GPIO27_LCD_DD4 MFP_CFG(GPIO27, AF1)
+#define GPIO28_LCD_DD5 MFP_CFG(GPIO28, AF1)
+#define GPIO29_LCD_DD6 MFP_CFG(GPIO29, AF1)
+#define GPIO30_LCD_DD7 MFP_CFG(GPIO30, AF1)
+#define GPIO31_LCD_DD8 MFP_CFG(GPIO31, AF1)
+#define GPIO32_LCD_DD9 MFP_CFG(GPIO32, AF1)
+#define GPIO33_LCD_DD10 MFP_CFG(GPIO33, AF1)
+#define GPIO34_LCD_DD11 MFP_CFG(GPIO34, AF1)
+#define GPIO35_LCD_DD12 MFP_CFG(GPIO35, AF1)
+#define GPIO36_LCD_DD13 MFP_CFG(GPIO36, AF1)
+#define GPIO37_LCD_DD14 MFP_CFG(GPIO37, AF1)
+#define GPIO38_LCD_DD15 MFP_CFG(GPIO38, AF1)
+#define GPIO39_LCD_DD16 MFP_CFG(GPIO39, AF1)
+#define GPIO40_LCD_DD17 MFP_CFG(GPIO40, AF1)
+#define GPIO41_LCD_CS2 MFP_CFG(GPIO41, AF3)
+#define GPIO42_LCD_VSYNC2 MFP_CFG(GPIO42, AF3)
+#define GPIO44_LCD_DD7 MFP_CFG(GPIO44, AF1)
+
+/* Mini-LCD */
+#define GPIO17_MLCD_FCLK MFP_CFG(GPIO17, AF3)
+#define GPIO18_MLCD_LCLK MFP_CFG(GPIO18, AF3)
+#define GPIO19_MLCD_PCLK MFP_CFG(GPIO19, AF3)
+#define GPIO20_MLCD_BIAS MFP_CFG(GPIO20, AF3)
+#define GPIO23_MLCD_DD0 MFP_CFG(GPIO23, AF3)
+#define GPIO24_MLCD_DD1 MFP_CFG(GPIO24, AF3)
+#define GPIO25_MLCD_DD2 MFP_CFG(GPIO25, AF3)
+#define GPIO26_MLCD_DD3 MFP_CFG(GPIO26, AF3)
+#define GPIO27_MLCD_DD4 MFP_CFG(GPIO27, AF3)
+#define GPIO28_MLCD_DD5 MFP_CFG(GPIO28, AF3)
+#define GPIO29_MLCD_DD6 MFP_CFG(GPIO29, AF3)
+#define GPIO30_MLCD_DD7 MFP_CFG(GPIO30, AF3)
+#define GPIO31_MLCD_DD8 MFP_CFG(GPIO31, AF3)
+#define GPIO32_MLCD_DD9 MFP_CFG(GPIO32, AF3)
+#define GPIO33_MLCD_DD10 MFP_CFG(GPIO33, AF3)
+#define GPIO34_MLCD_DD11 MFP_CFG(GPIO34, AF3)
+#define GPIO35_MLCD_DD12 MFP_CFG(GPIO35, AF3)
+#define GPIO36_MLCD_DD13 MFP_CFG(GPIO36, AF3)
+#define GPIO37_MLCD_DD14 MFP_CFG(GPIO37, AF3)
+#define GPIO38_MLCD_DD15 MFP_CFG(GPIO38, AF3)
+#define GPIO44_MLCD_DD7 MFP_CFG(GPIO44, AF5)
+
+/* MMC1 */
+#define GPIO10_MMC1_DAT3 MFP_CFG(GPIO10, AF4)
+#define GPIO11_MMC1_DAT2 MFP_CFG(GPIO11, AF4)
+#define GPIO12_MMC1_DAT1 MFP_CFG(GPIO12, AF4)
+#define GPIO13_MMC1_DAT0 MFP_CFG(GPIO13, AF4)
+#define GPIO14_MMC1_CMD MFP_CFG(GPIO14, AF4)
+#define GPIO15_MMC1_CLK MFP_CFG(GPIO15, AF4)
+#define GPIO55_MMC1_CMD MFP_CFG(GPIO55, AF3)
+#define GPIO56_MMC1_CLK MFP_CFG(GPIO56, AF3)
+#define GPIO57_MMC1_DAT0 MFP_CFG(GPIO57, AF3)
+#define GPIO58_MMC1_DAT1 MFP_CFG(GPIO58, AF3)
+#define GPIO59_MMC1_DAT2 MFP_CFG(GPIO59, AF3)
+#define GPIO60_MMC1_DAT3 MFP_CFG(GPIO60, AF3)
+
+#define DF_ADDR0_MMC1_CLK MFP_CFG(DF_ADDR0, AF2)
+#define DF_ADDR1_MMC1_CMD MFP_CFG(DF_ADDR1, AF2)
+#define DF_ADDR2_MMC1_DAT0 MFP_CFG(DF_ADDR2, AF2)
+#define DF_ADDR3_MMC1_DAT1 MFP_CFG(DF_ADDR3, AF3)
+#define nXCVREN_MMC1_DAT2 MFP_CFG(nXCVREN, AF2)
+
+/* MMC2 */
+#define GPIO31_MMC2_CMD MFP_CFG(GPIO31, AF7)
+#define GPIO32_MMC2_CLK MFP_CFG(GPIO32, AF7)
+#define GPIO33_MMC2_DAT0 MFP_CFG(GPIO33, AF7)
+#define GPIO34_MMC2_DAT1 MFP_CFG(GPIO34, AF7)
+#define GPIO35_MMC2_DAT2 MFP_CFG(GPIO35, AF7)
+#define GPIO36_MMC2_DAT3 MFP_CFG(GPIO36, AF7)
+
+#define GPIO101_MMC2_DAT3 MFP_CFG(GPIO101, AF1)
+#define GPIO102_MMC2_DAT2 MFP_CFG(GPIO102, AF1)
+#define GPIO103_MMC2_DAT1 MFP_CFG(GPIO103, AF1)
+#define GPIO104_MMC2_DAT0 MFP_CFG(GPIO104, AF1)
+#define GPIO105_MMC2_CMD MFP_CFG(GPIO105, AF1)
+#define GPIO106_MMC2_CLK MFP_CFG(GPIO106, AF1)
+
+#define DF_IO10_MMC2_DAT3 MFP_CFG(DF_IO10, AF3)
+#define DF_IO11_MMC2_DAT2 MFP_CFG(DF_IO11, AF3)
+#define DF_IO12_MMC2_DAT1 MFP_CFG(DF_IO12, AF3)
+#define DF_IO13_MMC2_DAT0 MFP_CFG(DF_IO13, AF3)
+#define DF_IO14_MMC2_CLK MFP_CFG(DF_IO14, AF3)
+#define DF_IO15_MMC2_CMD MFP_CFG(DF_IO15, AF3)
+
+/* BSSP1 */
+#define GPIO12_BSSP1_CLK MFP_CFG(GPIO12, AF3)
+#define GPIO13_BSSP1_FRM MFP_CFG(GPIO13, AF3)
+#define GPIO14_BSSP1_RXD MFP_CFG(GPIO14, AF3)
+#define GPIO15_BSSP1_TXD MFP_CFG(GPIO15, AF3)
+#define GPIO97_BSSP1_CLK MFP_CFG(GPIO97, AF5)
+#define GPIO98_BSSP1_FRM MFP_CFG(GPIO98, AF5)
+
+/* BSSP2 */
+#define GPIO84_BSSP2_SDATA_IN MFP_CFG(GPIO84, AF1)
+#define GPIO85_BSSP2_BITCLK MFP_CFG(GPIO85, AF1)
+#define GPIO86_BSSP2_SYSCLK MFP_CFG(GPIO86, AF1)
+#define GPIO87_BSSP2_SYNC MFP_CFG(GPIO87, AF1)
+#define GPIO88_BSSP2_DATA_OUT MFP_CFG(GPIO88, AF1)
+#define GPIO86_BSSP2_SDATA_IN MFP_CFG(GPIO86, AF4)
+
+/* BSSP3 */
+#define GPIO79_BSSP3_CLK MFP_CFG(GPIO79, AF1)
+#define GPIO80_BSSP3_FRM MFP_CFG(GPIO80, AF1)
+#define GPIO81_BSSP3_TXD MFP_CFG(GPIO81, AF1)
+#define GPIO82_BSSP3_RXD MFP_CFG(GPIO82, AF1)
+#define GPIO83_BSSP3_SYSCLK MFP_CFG(GPIO83, AF1)
+
+/* BSSP4 */
+#define GPIO43_BSSP4_CLK MFP_CFG(GPIO43, AF4)
+#define GPIO44_BSSP4_FRM MFP_CFG(GPIO44, AF4)
+#define GPIO45_BSSP4_TXD MFP_CFG(GPIO45, AF4)
+#define GPIO46_BSSP4_RXD MFP_CFG(GPIO46, AF4)
+
+#define GPIO51_BSSP4_CLK MFP_CFG(GPIO51, AF4)
+#define GPIO52_BSSP4_FRM MFP_CFG(GPIO52, AF4)
+#define GPIO53_BSSP4_TXD MFP_CFG(GPIO53, AF4)
+#define GPIO54_BSSP4_RXD MFP_CFG(GPIO54, AF4)
+
+/* GSSP1 */
+#define GPIO79_GSSP1_CLK MFP_CFG(GPIO79, AF2)
+#define GPIO80_GSSP1_FRM MFP_CFG(GPIO80, AF2)
+#define GPIO81_GSSP1_TXD MFP_CFG(GPIO81, AF2)
+#define GPIO82_GSSP1_RXD MFP_CFG(GPIO82, AF2)
+#define GPIO83_GSSP1_SYSCLK MFP_CFG(GPIO83, AF2)
+
+#define GPIO93_GSSP1_CLK MFP_CFG(GPIO93, AF4)
+#define GPIO94_GSSP1_FRM MFP_CFG(GPIO94, AF4)
+#define GPIO95_GSSP1_TXD MFP_CFG(GPIO95, AF4)
+#define GPIO96_GSSP1_RXD MFP_CFG(GPIO96, AF4)
+
+/* GSSP2 */
+#define GPIO47_GSSP2_CLK MFP_CFG(GPIO47, AF4)
+#define GPIO48_GSSP2_FRM MFP_CFG(GPIO48, AF4)
+#define GPIO49_GSSP2_RXD MFP_CFG(GPIO49, AF4)
+#define GPIO50_GSSP2_TXD MFP_CFG(GPIO50, AF4)
+
+#define GPIO69_GSSP2_CLK MFP_CFG(GPIO69, AF4)
+#define GPIO70_GSSP2_FRM MFP_CFG(GPIO70, AF4)
+#define GPIO71_GSSP2_RXD MFP_CFG(GPIO71, AF4)
+#define GPIO72_GSSP2_TXD MFP_CFG(GPIO72, AF4)
+
+#define GPIO84_GSSP2_RXD MFP_CFG(GPIO84, AF2)
+#define GPIO85_GSSP2_CLK MFP_CFG(GPIO85, AF2)
+#define GPIO86_GSSP2_SYSCLK MFP_CFG(GPIO86, AF2)
+#define GPIO87_GSSP2_FRM MFP_CFG(GPIO87, AF2)
+#define GPIO88_GSSP2_TXD MFP_CFG(GPIO88, AF2)
+#define GPIO86_GSSP2_RXD MFP_CFG(GPIO86, AF5)
+
+#define GPIO103_GSSP2_CLK MFP_CFG(GPIO103, AF2)
+#define GPIO104_GSSP2_FRM MFP_CFG(GPIO104, AF2)
+#define GPIO105_GSSP2_RXD MFP_CFG(GPIO105, AF2)
+#define GPIO106_GSSP2_TXD MFP_CFG(GPIO106, AF2)
+
+/* UART1 - FFUART */
+#define GPIO47_UART1_DSR_N MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART1_DTR_N MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART1_RI MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART1_DCD MFP_CFG(GPIO50, AF1)
+#define GPIO51_UART1_CTS MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART1_RTS MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART1_RXD MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART1_TXD MFP_CFG(GPIO54, AF1)
+
+#define GPIO63_UART1_TXD MFP_CFG(GPIO63, AF2)
+#define GPIO64_UART1_RXD MFP_CFG(GPIO64, AF2)
+#define GPIO65_UART1_DSR MFP_CFG(GPIO65, AF2)
+#define GPIO66_UART1_DTR MFP_CFG(GPIO66, AF2)
+#define GPIO67_UART1_RI MFP_CFG(GPIO67, AF2)
+#define GPIO68_UART1_DCD MFP_CFG(GPIO68, AF2)
+#define GPIO69_UART1_CTS MFP_CFG(GPIO69, AF2)
+#define GPIO70_UART1_RTS MFP_CFG(GPIO70, AF2)
+
+#define GPIO53_UART1_TXD MFP_CFG(GPIO53, AF2)
+#define GPIO54_UART1_RXD MFP_CFG(GPIO54, AF2)
+
+/* UART2 - BTUART */
+#define GPIO91_UART2_RXD MFP_CFG(GPIO91, AF1)
+#define GPIO92_UART2_TXD MFP_CFG(GPIO92, AF1)
+#define GPIO93_UART2_CTS MFP_CFG(GPIO93, AF1)
+#define GPIO94_UART2_RTS MFP_CFG(GPIO94, AF1)
+
+/* UART3 - STUART */
+#define GPIO43_UART3_RTS MFP_CFG(GPIO43, AF3)
+#define GPIO44_UART3_CTS MFP_CFG(GPIO44, AF3)
+#define GPIO45_UART3_RXD MFP_CFG(GPIO45, AF3)
+#define GPIO46_UART3_TXD MFP_CFG(GPIO46, AF3)
+
+#define GPIO75_UART3_RTS MFP_CFG(GPIO75, AF5)
+#define GPIO76_UART3_CTS MFP_CFG(GPIO76, AF5)
+#define GPIO77_UART3_TXD MFP_CFG(GPIO77, AF5)
+#define GPIO78_UART3_RXD MFP_CFG(GPIO78, AF5)
+
+/* DFI */
+#define DF_IO0_DF_IO0 MFP_CFG(DF_IO0, AF2)
+#define DF_IO1_DF_IO1 MFP_CFG(DF_IO1, AF2)
+#define DF_IO2_DF_IO2 MFP_CFG(DF_IO2, AF2)
+#define DF_IO3_DF_IO3 MFP_CFG(DF_IO3, AF2)
+#define DF_IO4_DF_IO4 MFP_CFG(DF_IO4, AF2)
+#define DF_IO5_DF_IO5 MFP_CFG(DF_IO5, AF2)
+#define DF_IO6_DF_IO6 MFP_CFG(DF_IO6, AF2)
+#define DF_IO7_DF_IO7 MFP_CFG(DF_IO7, AF2)
+#define DF_IO8_DF_IO8 MFP_CFG(DF_IO8, AF2)
+#define DF_IO9_DF_IO9 MFP_CFG(DF_IO9, AF2)
+#define DF_IO10_DF_IO10 MFP_CFG(DF_IO10, AF2)
+#define DF_IO11_DF_IO11 MFP_CFG(DF_IO11, AF2)
+#define DF_IO12_DF_IO12 MFP_CFG(DF_IO12, AF2)
+#define DF_IO13_DF_IO13 MFP_CFG(DF_IO13, AF2)
+#define DF_IO14_DF_IO14 MFP_CFG(DF_IO14, AF2)
+#define DF_IO15_DF_IO15 MFP_CFG(DF_IO15, AF2)
+#define DF_nADV1_ALE_DF_nADV1 MFP_CFG(DF_nADV1_ALE, AF2)
+#define DF_nADV2_ALE_DF_nADV2 MFP_CFG(DF_nADV2_ALE, AF2)
+#define DF_nCS0_DF_nCS0 MFP_CFG(DF_nCS0, AF2)
+#define DF_nCS1_DF_nCS1 MFP_CFG(DF_nCS1, AF2)
+#define DF_nRE_nOE_DF_nOE MFP_CFG(DF_nRE_nOE, AF2)
+#define DF_nWE_DF_nWE MFP_CFG(DF_nWE, AF2)
+
+/* DFI - NAND */
+#define DF_CLE_nOE_ND_CLE MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
+#define DF_INT_RnB_ND_INT_RnB MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
+#define DF_IO0_ND_IO0 MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
+#define DF_IO1_ND_IO1 MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
+#define DF_IO2_ND_IO2 MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
+#define DF_IO3_ND_IO3 MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
+#define DF_IO4_ND_IO4 MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
+#define DF_IO5_ND_IO5 MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
+#define DF_IO6_ND_IO6 MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
+#define DF_IO7_ND_IO7 MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
+#define DF_IO8_ND_IO8 MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
+#define DF_IO9_ND_IO9 MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
+#define DF_IO10_ND_IO10 MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
+#define DF_IO11_ND_IO11 MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
+#define DF_IO12_ND_IO12 MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
+#define DF_IO13_ND_IO13 MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
+#define DF_IO14_ND_IO14 MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
+#define DF_IO15_ND_IO15 MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
+#define DF_nADV1_ALE_ND_ALE MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_ND_ALE MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_nCS3 MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
+#define DF_nCS0_ND_nCS0 MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
+#define DF_nCS1_ND_nCS1 MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
+#define DF_nRE_nOE_ND_nRE MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
+#define DF_nWE_ND_nWE MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
+
+/* PWM */
+#define GPIO41_PWM0 MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
+#define GPIO42_PWM1 MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
+#define GPIO43_PWM3 MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
+#define GPIO20_PWM0 MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
+#define GPIO21_PWM2 MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
+#define GPIO22_PWM3 MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+#define GPIO32_PWM0 MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
+
+/* CIR */
+#define GPIO46_CIR_OUT MFP_CFG(GPIO46, AF1)
+#define GPIO77_CIR_OUT MFP_CFG(GPIO77, AF3)
+
+/* USB P2 */
+#define GPIO0_USB_P2_7 MFP_CFG(GPIO0, AF3)
+#define GPIO15_USB_P2_7 MFP_CFG(GPIO15, AF5)
+#define GPIO16_USB_P2_7 MFP_CFG(GPIO16, AF2)
+#define GPIO48_USB_P2_7 MFP_CFG(GPIO48, AF7)
+#define GPIO49_USB_P2_7 MFP_CFG(GPIO49, AF6)
+#define DF_IO9_USB_P2_7 MFP_CFG(DF_IO9, AF3)
+
+#define GPIO48_USB_P2_8 MFP_CFG(GPIO48, AF2)
+#define GPIO50_USB_P2_7 MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
+#define GPIO51_USB_P2_5 MFP_CFG(GPIO51, AF2)
+#define GPIO47_USB_P2_4 MFP_CFG(GPIO47, AF2)
+#define GPIO53_USB_P2_3 MFP_CFG(GPIO53, AF2)
+#define GPIO54_USB_P2_6 MFP_CFG(GPIO54, AF2)
+#define GPIO49_USB_P2_2 MFP_CFG(GPIO49, AF2)
+#define GPIO52_USB_P2_1 MFP_CFG(GPIO52, AF2)
+
+#define GPIO63_USB_P2_8 MFP_CFG(GPIO63, AF3)
+#define GPIO64_USB_P2_7 MFP_CFG(GPIO64, AF3)
+#define GPIO65_USB_P2_6 MFP_CFG(GPIO65, AF3)
+#define GPIO66_USG_P2_5 MFP_CFG(GPIO66, AF3)
+#define GPIO67_USB_P2_4 MFP_CFG(GPIO67, AF3)
+#define GPIO68_USB_P2_3 MFP_CFG(GPIO68, AF3)
+#define GPIO69_USB_P2_2 MFP_CFG(GPIO69, AF3)
+#define GPIO70_USB_P2_1 MFP_CFG(GPIO70, AF3)
+
+/* ULPI */
+#define GPIO31_USB_ULPI_D0 MFP_CFG(GPIO31, AF4)
+#define GPIO30_USB_ULPI_D1 MFP_CFG(GPIO30, AF7)
+#define GPIO33_USB_ULPI_D2 MFP_CFG(GPIO33, AF5)
+#define GPIO34_USB_ULPI_D3 MFP_CFG(GPIO34, AF5)
+#define GPIO35_USB_ULPI_D4 MFP_CFG(GPIO35, AF5)
+#define GPIO36_USB_ULPI_D5 MFP_CFG(GPIO36, AF5)
+#define GPIO41_USB_ULPI_D6 MFP_CFG(GPIO41, AF5)
+#define GPIO42_USB_ULPI_D7 MFP_CFG(GPIO42, AF5)
+#define GPIO37_USB_ULPI_DIR MFP_CFG(GPIO37, AF4)
+#define GPIO38_USB_ULPI_CLK MFP_CFG(GPIO38, AF4)
+#define GPIO39_USB_ULPI_STP MFP_CFG(GPIO39, AF4)
+#define GPIO40_USB_ULPI_NXT MFP_CFG(GPIO40, AF4)
+
+#define GPIO3_CLK26MOUTDMD MFP_CFG(GPIO3, AF3)
+#define GPIO40_CLK26MOUTDMD MFP_CFG(GPIO40, AF7)
+#define GPIO94_CLK26MOUTDMD MFP_CFG(GPIO94, AF5)
+#define GPIO104_CLK26MOUTDMD MFP_CFG(GPIO104, AF4)
+#define DF_ADDR1_CLK26MOUTDMD MFP_CFG(DF_ADDR2, AF3)
+#define DF_ADDR3_CLK26MOUTDMD MFP_CFG(DF_ADDR3, AF3)
+
+#define GPIO14_CLK26MOUT MFP_CFG(GPIO14, AF5)
+#define GPIO38_CLK26MOUT MFP_CFG(GPIO38, AF7)
+#define GPIO92_CLK26MOUT MFP_CFG(GPIO92, AF5)
+#define GPIO105_CLK26MOUT MFP_CFG(GPIO105, AF4)
+
+#define GPIO2_CLK13MOUTDMD MFP_CFG(GPIO2, AF3)
+#define GPIO39_CLK13MOUTDMD MFP_CFG(GPIO39, AF7)
+#define GPIO50_CLK13MOUTDMD MFP_CFG(GPIO50, AF3)
+#define GPIO93_CLK13MOUTDMD MFP_CFG(GPIO93, AF5)
+#define GPIO103_CLK13MOUTDMD MFP_CFG(GPIO103, AF4)
+#define DF_ADDR2_CLK13MOUTDMD MFP_CFG(DF_ADDR2, AF3)
+
+/* 1 wire */
+#define GPIO95_OW_DQ_IN MFP_CFG(GPIO95, AF5)
+
+#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
new file mode 100644
index 0000000..04dc78d
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -0,0 +1,782 @@
+/*
+ * Handles the Mitac Mio A701 Board
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/gpio_keys.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/rtc.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/reboot.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/max1586.h>
+#include <linux/slab.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa27x.h"
+#include "regs-rtc.h"
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
+#include <linux/platform_data/media/camera-pxa.h>
+#include <mach/audio.h>
+#include <mach/smemc.h>
+
+#include "mioa701.h"
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long mioa701_pin_config[] = {
+ /* Mio global */
+ MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
+ MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
+ MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
+ MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
+
+ /* Backlight PWM 0 */
+ GPIO16_PWM0_OUT,
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
+ MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
+ MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
+
+ /* USB */
+ MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
+ MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* QCI */
+ GPIO12_CIF_DD_7,
+ GPIO17_CIF_DD_6,
+ GPIO50_CIF_DD_3,
+ GPIO51_CIF_DD_2,
+ GPIO52_CIF_DD_4,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO55_CIF_DD_1,
+ GPIO81_CIF_DD_0,
+ GPIO82_CIF_DD_5,
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+ MIO_CFG_OUT(GPIO56_MT9M111_nOE, AF0, DRIVE_LOW),
+
+ /* Bluetooth */
+ MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
+ GPIO44_BTUART_CTS,
+ GPIO42_BTUART_RXD,
+ GPIO45_BTUART_RTS,
+ GPIO43_BTUART_TXD,
+ MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
+
+ /* GPS */
+ MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* GSM */
+ MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
+ MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
+ MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* Sound */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
+
+ /* Leds */
+ MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
+
+ /* Keyboard */
+ MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
+ MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
+ MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* Unknown */
+ MFP_CFG_IN(GPIO20, AF0),
+ MFP_CFG_IN(GPIO21, AF0),
+ MFP_CFG_IN(GPIO33, AF0),
+ MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
+ MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
+ MFP_CFG_IN(GPIO96, AF0),
+ MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
+};
+
+static struct pwm_lookup mioa701_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
+ PWM_POLARITY_NORMAL),
+};
+
+/* LCD Screen and Backlight */
+static struct platform_pwm_backlight_data mioa701_backlight_data = {
+ .max_brightness = 100,
+ .dft_brightness = 50,
+ .enable_gpio = -1,
+};
+
+/*
+ * LTM0305A776C LCD panel timings
+ *
+ * see:
+ * - the LTM0305A776C datasheet,
+ * - and the PXA27x Programmers' manual
+ */
+static struct pxafb_mode_info mioa701_ltm0305a776c = {
+ .pixclock = 220000, /* CLK=4.545 MHz */
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .vsync_len = 2,
+ .left_margin = 6,
+ .right_margin = 4,
+ .upper_margin = 5,
+ .lower_margin = 3,
+};
+
+static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+ gpio_set_value(GPIO87_LCD_POWER, on);
+}
+
+static struct pxafb_mach_info mioa701_pxafb_info = {
+ .modes = &mioa701_ltm0305a776c,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_lcd_power = mioa701_lcd_power,
+};
+
+/*
+ * Keyboard configuration
+ */
+static const unsigned int mioa701_matrix_keys[] = {
+ KEY(0, 0, KEY_UP),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_MEDIA),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_ENTER),
+ KEY(1, 2, KEY_CONNECT), /* GPS key */
+ KEY(2, 0, KEY_LEFT),
+ KEY(2, 1, KEY_PHONE), /* Phone Green key */
+ KEY(2, 2, KEY_CAMERA) /* Camera key */
+};
+
+static struct matrix_keymap_data mioa701_matrix_keymap_data = {
+ .keymap = mioa701_matrix_keys,
+ .keymap_size = ARRAY_SIZE(mioa701_matrix_keys),
+};
+
+static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
+ .matrix_key_rows = 3,
+ .matrix_key_cols = 3,
+ .matrix_keymap_data = &mioa701_matrix_keymap_data,
+};
+
+/*
+ * GPIO Key Configuration
+ */
+#define MIO_KEY(key, _gpio, _desc, _wakeup) \
+ { .code = (key), .gpio = (_gpio), .active_low = 0, \
+ .desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
+static struct gpio_keys_button mioa701_button_table[] = {
+ MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
+ MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
+ MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
+ MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
+};
+
+static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
+ .buttons = mioa701_button_table,
+ .nbuttons = ARRAY_SIZE(mioa701_button_table),
+};
+
+/*
+ * Leds and vibrator
+ */
+#define ONE_LED(_gpio, _name) \
+{ .gpio = (_gpio), .name = (_name), .active_low = true }
+static struct gpio_led gpio_leds[] = {
+ ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
+ ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
+ ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
+ ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
+ ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+/*
+ * GSM Sagem XS200 chip
+ *
+ * GSM handling was purged from kernel. For history, this is the way to go :
+ * - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
+ * GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
+ * - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
+ * GPIO24_GSM_MOD_RESET_CMD = 0
+ * - turn on : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
+ * GPIO88_GSM_nMOD_ON_CMD = 1
+ * - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
+ * GPIO90_GSM_nMOD_OFF_CMD = 1
+ */
+static int is_gsm_on(void)
+{
+ int is_on;
+
+ is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
+ return is_on;
+}
+
+irqreturn_t gsm_on_irq(int irq, void *p)
+{
+ printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
+ is_gsm_on() ? "on" : "off");
+ return IRQ_HANDLED;
+}
+
+static struct gpio gsm_gpios[] = {
+ { GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" },
+ { GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" },
+};
+
+static int __init gsm_init(void)
+{
+ int rc;
+
+ rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios));
+ if (rc)
+ goto err_gpio;
+ rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "GSM XS200 Power Irq", NULL);
+ if (rc)
+ goto err_irq;
+
+ gpio_set_wake(GPIO113_GSM_EVENT, 1);
+ return 0;
+
+err_irq:
+ printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
+ gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
+err_gpio:
+ printk(KERN_ERR "Mioa701: gsm not available\n");
+ return rc;
+}
+
+static void gsm_exit(void)
+{
+ free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
+ gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
+}
+
+/*
+ * Bluetooth BRF6150 chip
+ *
+ * BT handling was purged from kernel. For history, this is the way to go :
+ * - turn on : GPIO83_BT_ON = 1
+ * - turn off : GPIO83_BT_ON = 0
+ */
+
+/*
+ * GPS Sirf Star III chip
+ *
+ * GPS handling was purged from kernel. For history, this is the way to go :
+ * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ * GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
+ * - turn on : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
+ * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ */
+
+/*
+ * USB UDC
+ */
+static int is_usb_connected(void)
+{
+ return !gpio_get_value(GPIO13_nUSB_DETECT);
+}
+
+static struct pxa2xx_udc_mach_info mioa701_udc_info = {
+ .udc_is_connected = is_usb_connected,
+ .gpio_pullup = GPIO22_USB_ENABLE,
+};
+
+struct gpio_vbus_mach_info gpio_vbus_data = {
+ .gpio_vbus = GPIO13_nUSB_DETECT,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = -1,
+};
+
+/*
+ * SDIO/MMC Card controller
+ */
+/**
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static struct pxamci_platform_data mioa701_mci_info = {
+ .detect_delay_ms = 250,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO15_SDIO_INSERT,
+ .gpio_card_ro = GPIO78_SDIO_RO,
+ .gpio_power = GPIO91_SDIO_EN,
+};
+
+/* FlashRAM */
+static struct resource docg3_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device docg3 = {
+ .name = "docg3",
+ .id = -1,
+ .resource = &docg3_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+/*
+ * Suspend/Resume bootstrap management
+ *
+ * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled,
+ * this sequence is as follows :
+ * - disables interrupts
+ * - initialize SDRAM (self refresh RAM into active RAM)
+ * - initialize GPIOs (depends on value at 0xa020b020)
+ * - initialize coprossessors
+ * - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
+ * - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
+ * - else do a resume, ie. jump to addr 0xa0100000
+ */
+#define RESUME_ENABLE_ADDR 0xa020b000
+#define RESUME_ENABLE_VAL 0x0f0f0f0f
+#define RESUME_BT_ADDR 0xa020b020
+#define RESUME_UNKNOWN_ADDR 0xa020b024
+#define RESUME_VECTOR_ADDR 0xa0100000
+#define BOOTSTRAP_WORDS mioa701_bootstrap_lg/4
+
+static u32 *save_buffer;
+
+static void install_bootstrap(void)
+{
+ int i;
+ u32 *rom_bootstrap = phys_to_virt(RESUME_VECTOR_ADDR);
+ u32 *src = &mioa701_bootstrap;
+
+ for (i = 0; i < BOOTSTRAP_WORDS; i++)
+ rom_bootstrap[i] = src[i];
+}
+
+
+static int mioa701_sys_suspend(void)
+{
+ int i = 0, is_bt_on;
+ u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
+ u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+ u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR);
+ u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+ /* Devices prepare suspend */
+ is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
+ pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
+ is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
+
+ for (i = 0; i < BOOTSTRAP_WORDS; i++)
+ save_buffer[i] = mem_resume_vector[i];
+ save_buffer[i++] = *mem_resume_enabler;
+ save_buffer[i++] = *mem_resume_bt;
+ save_buffer[i++] = *mem_resume_unknown;
+
+ *mem_resume_enabler = RESUME_ENABLE_VAL;
+ *mem_resume_bt = is_bt_on;
+
+ install_bootstrap();
+ return 0;
+}
+
+static void mioa701_sys_resume(void)
+{
+ int i = 0;
+ u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
+ u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+ u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR);
+ u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+ for (i = 0; i < BOOTSTRAP_WORDS; i++)
+ mem_resume_vector[i] = save_buffer[i];
+ *mem_resume_enabler = save_buffer[i++];
+ *mem_resume_bt = save_buffer[i++];
+ *mem_resume_unknown = save_buffer[i++];
+}
+
+static struct syscore_ops mioa701_syscore_ops = {
+ .suspend = mioa701_sys_suspend,
+ .resume = mioa701_sys_resume,
+};
+
+static int __init bootstrap_init(void)
+{
+ int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
+
+ register_syscore_ops(&mioa701_syscore_ops);
+
+ save_buffer = kmalloc(save_size, GFP_KERNEL);
+ if (!save_buffer)
+ return -ENOMEM;
+ printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
+ save_size);
+ return 0;
+}
+
+static void bootstrap_exit(void)
+{
+ kfree(save_buffer);
+ unregister_syscore_ops(&mioa701_syscore_ops);
+
+ printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
+ "resume !!!\n");
+}
+
+/*
+ * Power Supply
+ */
+static char *supplicants[] = {
+ "mioa701_battery"
+};
+
+static int is_ac_connected(void)
+{
+ return gpio_get_value(GPIO96_AC_DETECT);
+}
+
+static void mioa701_set_charge(int flags)
+{
+ gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
+}
+
+static struct pda_power_pdata power_pdata = {
+ .is_ac_online = is_ac_connected,
+ .is_usb_online = is_usb_connected,
+ .set_charge = mioa701_set_charge,
+ .supplied_to = supplicants,
+ .num_supplicants = ARRAY_SIZE(supplicants),
+};
+
+static struct resource power_resources[] = {
+ [0] = {
+ .name = "ac",
+ .start = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
+ .end = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ },
+ [1] = {
+ .name = "usb",
+ .start = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
+ .end = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct platform_device power_dev = {
+ .name = "pda-power",
+ .id = -1,
+ .resource = power_resources,
+ .num_resources = ARRAY_SIZE(power_resources),
+ .dev = {
+ .platform_data = &power_pdata,
+ },
+};
+
+static struct wm97xx_batt_pdata mioa701_battery_data = {
+ .batt_aux = WM97XX_AUX_ID1,
+ .temp_aux = -1,
+ .charge_gpio = -1,
+ .min_voltage = 0xc00,
+ .max_voltage = 0xfc0,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
+ .batt_div = 1,
+ .batt_mult = 1,
+ .batt_name = "mioa701_battery",
+};
+
+static struct wm97xx_pdata mioa701_wm97xx_pdata = {
+ .batt_pdata = &mioa701_battery_data,
+};
+
+/*
+ * Voltage regulation
+ */
+static struct regulator_consumer_supply max1586_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data max1586_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 1000000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
+ .consumer_supplies = max1586_consumers,
+};
+
+static struct max1586_subdev_data max1586_subdevs[] = {
+ { .name = "vcc_core", .id = MAX1586_V3,
+ .platform_data = &max1586_v3_info },
+};
+
+static struct max1586_platform_data max1586_info = {
+ .subdevs = max1586_subdevs,
+ .num_subdevs = ARRAY_SIZE(max1586_subdevs),
+ .v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
+};
+
+/*
+ * Camera interface
+ */
+struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 5000,
+ .sensor_i2c_adapter_id = 0,
+ .sensor_i2c_address = 0x5d,
+};
+
+static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &max1586_info,
+ },
+};
+
+/* Board I2C devices. */
+static struct i2c_board_info mioa701_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("mt9m111", 0x5d),
+ },
+};
+
+struct i2c_pxa_platform_data i2c_pdata = {
+ .fast_mode = 1,
+};
+
+static pxa2xx_audio_ops_t mioa701_ac97_info = {
+ .reset_gpio = 95,
+ .codec_pdata = { &mioa701_wm97xx_pdata, },
+};
+
+/*
+ * Mio global
+ */
+
+/* Devices */
+#define MIO_PARENT_DEV(var, strname, tparent, pdata) \
+static struct platform_device var = { \
+ .name = strname, \
+ .id = -1, \
+ .dev = { \
+ .platform_data = pdata, \
+ .parent = tparent, \
+ }, \
+};
+#define MIO_SIMPLE_DEV(var, strname, pdata) \
+ MIO_PARENT_DEV(var, strname, NULL, pdata)
+
+MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys", &mioa701_gpio_keys_data)
+MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev,
+ &mioa701_backlight_data);
+MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
+MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
+MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
+MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
+MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
+
+static struct platform_device *devices[] __initdata = {
+ &mioa701_gpio_keys,
+ &mioa701_backlight,
+ &mioa701_led,
+ &pxa2xx_pcm,
+ &mioa701_sound,
+ &power_dev,
+ &docg3,
+ &gpio_vbus,
+ &mioa701_board,
+};
+
+static void mioa701_machine_exit(void);
+
+static void mioa701_poweroff(void)
+{
+ mioa701_machine_exit();
+ pxa_restart(REBOOT_SOFT, NULL);
+}
+
+static void mioa701_restart(enum reboot_mode c, const char *cmd)
+{
+ mioa701_machine_exit();
+ pxa_restart(REBOOT_SOFT, cmd);
+}
+
+static struct gpio global_gpios[] = {
+ { GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
+ { GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
+ { GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
+ { GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
+};
+
+static struct regulator_consumer_supply fixed_5v0_consumers[] = {
+ REGULATOR_SUPPLY("power", "pwm-backlight"),
+};
+
+static void __init mioa701_machine_init(void)
+{
+ int rc;
+
+ PSLR = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
+ PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
+ RTTR = 32768 - 1; /* Reset crazy WinCE value */
+ UP2OCR = UP2OCR_HXOE;
+
+ /*
+ * Set up the flash memory : DiskOnChip G3 on first static memory bank
+ */
+ __raw_writel(0x7ff02dd8, MSC0);
+ __raw_writel(0x0001c391, MCMEM0);
+ __raw_writel(0x0001c391, MCATT0);
+ __raw_writel(0x0001c391, MCIO0);
+
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
+ if (rc)
+ pr_err("MioA701: Failed to request GPIOs: %d", rc);
+ bootstrap_init();
+ pxa_set_fb_info(NULL, &mioa701_pxafb_info);
+ pxa_set_mci_info(&mioa701_mci_info);
+ pxa_set_keypad_info(&mioa701_keypad_info);
+ pxa_set_udc_info(&mioa701_udc_info);
+ pxa_set_ac97_info(&mioa701_ac97_info);
+ pm_power_off = mioa701_poweroff;
+ pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ gsm_init();
+
+ i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
+ i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
+ pxa_set_i2c_info(&i2c_pdata);
+ pxa27x_set_i2c_power_info(NULL);
+ pxa_set_camera_info(&mioa701_pxacamera_platform_data);
+
+ regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
+ ARRAY_SIZE(fixed_5v0_consumers),
+ 5000000);
+ regulator_has_full_constraints();
+}
+
+static void mioa701_machine_exit(void)
+{
+ bootstrap_exit();
+ gsm_exit();
+}
+
+MACHINE_START(MIOA701, "MIO A701")
+ .atag_offset = 0x100,
+ .map_io = &pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = &pxa27x_init_irq,
+ .handle_irq = &pxa27x_handle_irq,
+ .init_machine = mioa701_machine_init,
+ .init_time = pxa_timer_init,
+ .restart = mioa701_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.h b/arch/arm/mach-pxa/mioa701.h
new file mode 100644
index 0000000..d94295c
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _MIOA701_H_
+#define _MIOA701_H_
+
+#define MIO_CFG_IN(pin, af) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+ (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
+
+#define MIO_CFG_OUT(pin, af, state) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Global GPIOs */
+#define GPIO9_CHARGE_EN 9
+#define GPIO18_POWEROFF 18
+#define GPIO87_LCD_POWER 87
+#define GPIO96_AC_DETECT 96
+#define GPIO80_MAYBE_CHARGE_VDROP 80 /* Drop of 88mV */
+
+/* USB */
+#define GPIO13_nUSB_DETECT 13
+#define GPIO22_USB_ENABLE 22
+
+/* SDIO bits */
+#define GPIO78_SDIO_RO 78
+#define GPIO15_SDIO_INSERT 15
+#define GPIO91_SDIO_EN 91
+
+/* Bluetooth */
+#define GPIO14_BT_nACTIVITY 14
+#define GPIO83_BT_ON 83
+#define GPIO77_BT_UNKNOWN1 77
+#define GPIO86_BT_MAYBE_nRESET 86
+
+/* GPS */
+#define GPIO23_GPS_UNKNOWN1 23
+#define GPIO26_GPS_ON 26
+#define GPIO27_GPS_RESET 27
+#define GPIO106_GPS_UNKNOWN2 106
+#define GPIO107_GPS_UNKNOWN3 107
+
+/* GSM */
+#define GPIO24_GSM_MOD_RESET_CMD 24
+#define GPIO88_GSM_nMOD_ON_CMD 88
+#define GPIO90_GSM_nMOD_OFF_CMD 90
+#define GPIO114_GSM_nMOD_DTE_UART_STATE 114
+#define GPIO25_GSM_MOD_ON_STATE 25
+#define GPIO113_GSM_EVENT 113
+
+/* SOUND */
+#define GPIO12_HPJACK_INSERT 12
+
+/* LEDS */
+#define GPIO10_LED_nCharging 10
+#define GPIO97_LED_nBlue 97
+#define GPIO98_LED_nOrange 98
+#define GPIO82_LED_nVibra 82
+#define GPIO115_LED_nKeyboard 115
+
+/* Keyboard */
+#define GPIO0_KEY_POWER 0
+#define GPIO93_KEY_VOLUME_UP 93
+#define GPIO94_KEY_VOLUME_DOWN 94
+
+/* Camera */
+#define GPIO56_MT9M111_nOE 56
+
+extern struct input_dev *mioa701_evdev;
+extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
+
+/* Assembler externals mioa701_bootresume.S */
+extern u32 mioa701_bootstrap;
+extern u32 mioa701_jumpaddr;
+extern u32 mioa701_bootstrap_lg;
+
+#endif /* _MIOA701_H */
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
new file mode 100644
index 0000000..42d93f4
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -0,0 +1,39 @@
+/* Bootloader to resume MIO A701
+ *
+ * 2007-1-12 Robert Jarzmik
+ *
+ * This code is licenced under the GPLv2.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Note: Yes, part of the following code is located into the .data section.
+ * This is to allow jumpaddr to be accessed with a relative load
+ * while we can't rely on any MMU translation. We could have put
+ * sleep_save_sp in the .text section as well, but some setups might
+ * insist on it to be truly read-only.
+ */
+ .data
+ .align 2
+ENTRY(mioa701_bootstrap)
+0:
+ b 1f
+ENTRY(mioa701_jumpaddr)
+ .word 0x40f00008 @ PSPR in no-MMU mode
+1:
+ mov r0, #0xa0000000 @ Don't suppose memory access works
+ orr r0, r0, #0x00200000 @ even if it's supposed to
+ orr r0, r0, #0x0000b000
+ mov r1, #0
+ str r1, [r0] @ Early disable resume for next boot
+ ldr r0, mioa701_jumpaddr @ (Murphy's Law)
+ ldr r0, [r0]
+ ret r0
+2:
+
+ENTRY(mioa701_bootstrap_lg)
+ .data
+ .align 2
+ .word 2b-0b
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
new file mode 100644
index 0000000..4d89029
--- /dev/null
+++ b/arch/arm/mach-pxa/mp900.c
@@ -0,0 +1,104 @@
+/*
+ * linux/arch/arm/mach-pxa/mp900.c
+ *
+ * Support for the NEC MobilePro900/C platform
+ *
+ * Based on mach-pxa/gumstix.c
+ *
+ * 2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
+ * 2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/usb/isp116x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa25x.h"
+#include "generic.h"
+
+static void isp116x_pfm_delay(struct device *dev, int delay)
+{
+
+ /* 400MHz PXA2 = 2.5ns / instruction */
+
+ int cyc = delay / 10;
+
+ /* 4 Instructions = 4 x 2.5ns = 10ns */
+ __asm__ volatile ("0:\n"
+ "subs %0, %1, #1\n"
+ "bge 0b\n"
+ :"=r" (cyc)
+ :"0"(cyc)
+ );
+}
+
+static struct isp116x_platform_data isp116x_pfm_data = {
+ .remote_wakeup_enable = 1,
+ .delay = isp116x_pfm_delay,
+};
+
+static struct resource isp116x_pfm_resources[] = {
+ [0] = {
+ .start = 0x0d000000,
+ .end = 0x0d000000 + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x0d000000 + 4,
+ .end = 0x0d000000 + 5,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = 61,
+ .end = 61,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mp900c_dummy_device = {
+ .name = "mp900c_dummy",
+ .id = -1,
+};
+
+static struct platform_device mp900c_usb = {
+ .name = "isp116x-hcd",
+ .num_resources = ARRAY_SIZE(isp116x_pfm_resources),
+ .resource = isp116x_pfm_resources,
+ .dev.platform_data = &isp116x_pfm_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mp900c_dummy_device,
+ &mp900c_usb,
+};
+
+static void __init mp900c_init(void)
+{
+ printk(KERN_INFO "MobilePro 900/C machine init\n");
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
+MACHINE_START(NEC_MP900, "MobilePro900/C")
+ .atag_offset = 0x220100,
+ .init_time = pxa_timer_init,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_machine = mp900c_init,
+ .restart = pxa_restart,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
new file mode 100644
index 0000000..616b223
--- /dev/null
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -0,0 +1,473 @@
+/*
+ * linux/arch/arm/mach-pxa/mxm8x10.c
+ *
+ * Support for the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ * rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ * Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ * rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_8250.h>
+#include <linux/dm9000.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include "pxa320.h"
+
+#include "mxm8x10.h"
+
+#include "devices.h"
+#include "generic.h"
+
+/* GPIO pin definition
+
+External device stuff - Leave unconfigured for now...
+---------------------
+GPIO0 - DREQ (External DMA Request)
+GPIO3 - nGCS2 (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
+GPIO4 - nGCS3
+GPIO15 - EXT_GPIO1
+GPIO16 - EXT_GPIO2
+GPIO17 - EXT_GPIO3
+GPIO24 - EXT_GPIO4
+GPIO25 - EXT_GPIO5
+GPIO26 - EXT_GPIO6
+GPIO27 - EXT_GPIO7
+GPIO28 - EXT_GPIO8
+GPIO29 - EXT_GPIO9
+GPIO30 - EXT_GPIO10
+GPIO31 - EXT_GPIO11
+GPIO57 - EXT_GPIO12
+GPIO74 - EXT_IRQ1
+GPIO75 - EXT_IRQ2
+GPIO76 - EXT_IRQ3
+GPIO77 - EXT_IRQ4
+GPIO78 - EXT_IRQ5
+GPIO79 - EXT_IRQ6
+GPIO80 - EXT_IRQ7
+GPIO81 - EXT_IRQ8
+GPIO87 - VCCIO_PWREN (External Device PWREN)
+
+Dallas 1-Wire - Leave unconfigured for now...
+-------------
+GPIO0_2 - DS - 1Wire
+
+Ethernet
+--------
+GPIO1 - DM9000 PWR
+GPIO9 - DM9K_nIRQ
+GPIO36 - DM9K_RESET
+
+Keypad - Leave unconfigured by for now...
+------
+GPIO1_2 - KP_DKIN0
+GPIO5_2 - KP_MKOUT7
+GPIO82 - KP_DKIN1
+GPIO85 - KP_DKIN2
+GPIO86 - KP_DKIN3
+GPIO113 - KP_MKIN0
+GPIO114 - KP_MKIN1
+GPIO115 - KP_MKIN2
+GPIO116 - KP_MKIN3
+GPIO117 - KP_MKIN4
+GPIO118 - KP_MKIN5
+GPIO119 - KP_MKIN6
+GPIO120 - KP_MKIN7
+GPIO121 - KP_MKOUT0
+GPIO122 - KP_MKOUT1
+GPIO122 - KP_MKOUT2
+GPIO123 - KP_MKOUT3
+GPIO124 - KP_MKOUT4
+GPIO125 - KP_MKOUT5
+GPIO127 - KP_MKOUT6
+
+Data Bus - Leave unconfigured for now...
+--------
+GPIO2 - nWait (Data Bus)
+
+USB Device
+----------
+GPIO4_2 - USBD_PULLUP
+GPIO10 - UTM_CLK (USB Device UTM Clk)
+GPIO49 - USB 2.0 Device UTM_DATA0
+GPIO50 - USB 2.0 Device UTM_DATA1
+GPIO51 - USB 2.0 Device UTM_DATA2
+GPIO52 - USB 2.0 Device UTM_DATA3
+GPIO53 - USB 2.0 Device UTM_DATA4
+GPIO54 - USB 2.0 Device UTM_DATA5
+GPIO55 - USB 2.0 Device UTM_DATA6
+GPIO56 - USB 2.0 Device UTM_DATA7
+GPIO58 - UTM_RXVALID (USB 2.0 Device)
+GPIO59 - UTM_RXACTIVE (USB 2.0 Device)
+GPIO60 - UTM_RXERROR
+GPIO61 - UTM_OPMODE0
+GPIO62 - UTM_OPMODE1
+GPIO71 - USBD_INT (USB Device?)
+GPIO73 - UTM_TXREADY (USB 2.0 Device)
+GPIO83 - UTM_TXVALID (USB 2.0 Device)
+GPIO98 - UTM_RESET (USB 2.0 device)
+GPIO99 - UTM_XCVR_SELECT
+GPIO100 - UTM_TERM_SELECT
+GPIO101 - UTM_SUSPENDM_X
+GPIO102 - UTM_LINESTATE0
+GPIO103 - UTM_LINESTATE1
+
+Card-Bus Interface - Leave unconfigured for now...
+------------------
+GPIO5 - nPIOR (I/O space output enable)
+GPIO6 - nPIOW (I/O space write enable)
+GPIO7 - nIOS16 (Input from I/O space telling size of data bus)
+GPIO8 - nPWAIT (Input for inserting wait states)
+
+LCD
+---
+GPIO6_2 - LDD0
+GPIO7_2 - LDD1
+GPIO8_2 - LDD2
+GPIO9_2 - LDD3
+GPIO11_2 - LDD5
+GPIO12_2 - LDD6
+GPIO13_2 - LDD7
+GPIO14_2 - VSYNC
+GPIO15_2 - HSYNC
+GPIO16_2 - VCLK
+GPIO17_2 - HCLK
+GPIO18_2 - VDEN
+GPIO63 - LDD8 (CPU LCD)
+GPIO64 - LDD9 (CPU LCD)
+GPIO65 - LDD10 (CPU LCD)
+GPIO66 - LDD11 (CPU LCD)
+GPIO67 - LDD12 (CPU LCD)
+GPIO68 - LDD13 (CPU LCD)
+GPIO69 - LDD14 (CPU LCD)
+GPIO70 - LDD15 (CPU LCD)
+GPIO88 - VCCLCD_PWREN (LCD Panel PWREN)
+GPIO97 - BACKLIGHT_EN
+GPIO104 - LCD_PWREN
+
+PWM - Leave unconfigured for now...
+---
+GPIO11 - PWM0
+GPIO12 - PWM1
+GPIO13 - PWM2
+GPIO14 - PWM3
+
+SD-CARD
+-------
+GPIO18 - SDDATA0
+GPIO19 - SDDATA1
+GPIO20 - SDDATA2
+GPIO21 - SDDATA3
+GPIO22 - SDCLK
+GPIO23 - SDCMD
+GPIO72 - SD_WP
+GPIO84 - SD_nIRQ_CD (SD-Card)
+
+I2C
+---
+GPIO32 - I2CSCL
+GPIO33 - I2CSDA
+
+AC97
+----
+GPIO35 - AC97_SDATA_IN
+GPIO37 - AC97_SDATA_OUT
+GPIO38 - AC97_SYNC
+GPIO39 - AC97_BITCLK
+GPIO40 - AC97_nRESET
+
+UART1
+-----
+GPIO41 - UART_RXD1
+GPIO42 - UART_TXD1
+GPIO43 - UART_CTS1
+GPIO44 - UART_DCD1
+GPIO45 - UART_DSR1
+GPIO46 - UART_nRI1
+GPIO47 - UART_DTR1
+GPIO48 - UART_RTS1
+
+UART2
+-----
+GPIO109 - RTS2
+GPIO110 - RXD2
+GPIO111 - TXD2
+GPIO112 - nCTS2
+
+UART3
+-----
+GPIO105 - nCTS3
+GPIO106 - nRTS3
+GPIO107 - TXD3
+GPIO108 - RXD3
+
+SSP3 - Leave unconfigured for now...
+----
+GPIO89 - SSP3_CLK
+GPIO90 - SSP3_SFRM
+GPIO91 - SSP3_TXD
+GPIO92 - SSP3_RXD
+
+SSP4
+GPIO93 - SSP4_CLK
+GPIO94 - SSP4_SFRM
+GPIO95 - SSP4_TXD
+GPIO96 - SSP4_RXD
+*/
+
+static mfp_cfg_t mfp_cfg[] __initdata = {
+ /* USB */
+ GPIO10_UTM_CLK,
+ GPIO49_U2D_PHYDATA_0,
+ GPIO50_U2D_PHYDATA_1,
+ GPIO51_U2D_PHYDATA_2,
+ GPIO52_U2D_PHYDATA_3,
+ GPIO53_U2D_PHYDATA_4,
+ GPIO54_U2D_PHYDATA_5,
+ GPIO55_U2D_PHYDATA_6,
+ GPIO56_U2D_PHYDATA_7,
+ GPIO58_UTM_RXVALID,
+ GPIO59_UTM_RXACTIVE,
+ GPIO60_U2D_RXERROR,
+ GPIO61_U2D_OPMODE0,
+ GPIO62_U2D_OPMODE1,
+ GPIO71_GPIO, /* USBD_INT */
+ GPIO73_UTM_TXREADY,
+ GPIO83_U2D_TXVALID,
+ GPIO98_U2D_RESET,
+ GPIO99_U2D_XCVR_SEL,
+ GPIO100_U2D_TERM_SEL,
+ GPIO101_U2D_SUSPEND,
+ GPIO102_UTM_LINESTATE_0,
+ GPIO103_UTM_LINESTATE_1,
+ GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
+
+ /* DM9000 */
+ GPIO1_GPIO,
+ GPIO9_GPIO,
+ GPIO36_GPIO,
+
+ /* AC97 */
+ GPIO35_AC97_SDATA_IN_0,
+ GPIO37_AC97_SDATA_OUT,
+ GPIO38_AC97_SYNC,
+ GPIO39_AC97_BITCLK,
+ GPIO40_AC97_nACRESET,
+
+ /* UARTS */
+ GPIO41_UART1_RXD,
+ GPIO42_UART1_TXD,
+ GPIO43_UART1_CTS,
+ GPIO44_UART1_DCD,
+ GPIO45_UART1_DSR,
+ GPIO46_UART1_RI,
+ GPIO47_UART1_DTR,
+ GPIO48_UART1_RTS,
+
+ GPIO109_UART2_RTS,
+ GPIO110_UART2_RXD,
+ GPIO111_UART2_TXD,
+ GPIO112_UART2_CTS,
+
+ GPIO105_UART3_CTS,
+ GPIO106_UART3_RTS,
+ GPIO107_UART3_TXD,
+ GPIO108_UART3_RXD,
+
+ GPIO78_GPIO,
+ GPIO79_GPIO,
+ GPIO80_GPIO,
+ GPIO81_GPIO,
+
+ /* I2C */
+ GPIO32_I2C_SCL,
+ GPIO33_I2C_SDA,
+
+ /* MMC */
+ GPIO18_MMC1_DAT0,
+ GPIO19_MMC1_DAT1,
+ GPIO20_MMC1_DAT2,
+ GPIO21_MMC1_DAT3,
+ GPIO22_MMC1_CLK,
+ GPIO23_MMC1_CMD,
+ GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */
+ GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */
+
+ /* IRQ */
+ GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
+ GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
+ GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
+ GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
+ GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
+ GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
+ GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
+ GPIO81_GPIO | MFP_LPM_EDGE_RISE /* EXT_IRQ8 */
+};
+
+/* MMC/MCI Support */
+#if defined(CONFIG_MMC)
+static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .detect_delay_ms = 10,
+ .gpio_card_detect = MXM_8X10_SD_nCD,
+ .gpio_card_ro = MXM_8X10_SD_WP,
+ .gpio_power = -1
+};
+
+void __init mxm_8x10_mmc_init(void)
+{
+ pxa_set_mci_info(&mxm_8x10_mci_platform_data);
+}
+#endif
+
+/* USB Open Host Controller Interface */
+static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
+ .port_mode = PMM_NPS_MODE,
+ .flags = ENABLE_PORT_ALL
+};
+
+void __init mxm_8x10_usb_host_init(void)
+{
+ pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
+}
+
+/* AC97 Sound Support */
+static struct platform_device mxm_8x10_ac97_device = {
+ .name = "pxa2xx-ac97"
+};
+
+void __init mxm_8x10_ac97_init(void)
+{
+ platform_device_register(&mxm_8x10_ac97_device);
+}
+
+/* NAND flash Support */
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
+#define NAND_BLOCK_SIZE SZ_128K
+#define NB(x) (NAND_BLOCK_SIZE * (x))
+static struct mtd_partition mxm_8x10_nand_partitions[] = {
+ [0] = {
+ .name = "boot",
+ .size = NB(0x002),
+ .offset = NB(0x000),
+ .mask_flags = MTD_WRITEABLE
+ },
+ [1] = {
+ .name = "kernel",
+ .size = NB(0x010),
+ .offset = NB(0x002),
+ .mask_flags = MTD_WRITEABLE
+ },
+ [2] = {
+ .name = "root",
+ .size = NB(0x36c),
+ .offset = NB(0x012)
+ },
+ [3] = {
+ .name = "bbt",
+ .size = NB(0x082),
+ .offset = NB(0x37e),
+ .mask_flags = MTD_WRITEABLE
+ }
+};
+
+static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
+ .keep_config = 1,
+ .parts = mxm_8x10_nand_partitions,
+ .nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
+};
+
+static void __init mxm_8x10_nand_init(void)
+{
+ pxa3xx_set_nand_info(&mxm_8x10_nand_info);
+}
+#else
+static inline void mxm_8x10_nand_init(void) {}
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
+
+/* Ethernet support: Davicom DM9000 */
+static struct resource dm9k_resources[] = {
+ [0] = {
+ .start = MXM_8X10_ETH_PHYS + 0x300,
+ .end = MXM_8X10_ETH_PHYS + 0x300,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXM_8X10_ETH_PHYS + 0x308,
+ .end = MXM_8X10_ETH_PHYS + 0x308,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
+ }
+};
+
+static struct dm9000_plat_data dm9k_plat_data = {
+ .flags = DM9000_PLATF_16BITONLY
+};
+
+static struct platform_device dm9k_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9k_resources),
+ .resource = dm9k_resources,
+ .dev = {
+ .platform_data = &dm9k_plat_data
+ }
+};
+
+static void __init mxm_8x10_ethernet_init(void)
+{
+ platform_device_register(&dm9k_device);
+}
+
+/* PXA UARTs */
+static void __init mxm_8x10_uarts_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+}
+
+/* I2C and Real Time Clock */
+static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68)
+ }
+};
+
+static void __init mxm_8x10_i2c_init(void)
+{
+ i2c_register_board_info(0, mxm_8x10_i2c_devices,
+ ARRAY_SIZE(mxm_8x10_i2c_devices));
+ pxa_set_i2c_info(NULL);
+}
+
+void __init mxm_8x10_barebones_init(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
+
+ mxm_8x10_uarts_init();
+ mxm_8x10_nand_init();
+ mxm_8x10_i2c_init();
+ mxm_8x10_ethernet_init();
+}
diff --git a/arch/arm/mach-pxa/mxm8x10.h b/arch/arm/mach-pxa/mxm8x10.h
new file mode 100644
index 0000000..dcd3232
--- /dev/null
+++ b/arch/arm/mach-pxa/mxm8x10.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_MXM_8X10_H
+#define __MACH_MXM_8X10_H
+
+#define MXM_8X10_ETH_PHYS 0x13000000
+
+#if defined(CONFIG_MMC)
+
+#define MXM_8X10_SD_nCD (72)
+#define MXM_8X10_SD_WP (84)
+
+extern void mxm_8x10_mmc_init(void);
+#else
+static inline void mxm_8x10_mmc_init(void) {}
+#endif
+
+extern void mxm_8x10_usb_host_init(void);
+extern void mxm_8x10_ac97_init(void);
+
+extern void mxm_8x10_barebones_init(void);
+
+#endif /* __MACH_MXM_8X10_H */
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
new file mode 100644
index 0000000..1efe9bc
--- /dev/null
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -0,0 +1,483 @@
+/*
+ * Common code for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx.h>
+#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/regulator/max1586.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "pxa27x.h"
+#include <mach/audio.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include "udc.h"
+#include <linux/platform_data/asoc-palm27x.h>
+#include "palm27x.h"
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data palm27x_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .detect_delay_ms = 200,
+};
+
+void __init palm27x_mmc_init(int detect, int ro, int power,
+ int power_inverted)
+{
+ palm27x_mci_platform_data.gpio_card_detect = detect;
+ palm27x_mci_platform_data.gpio_card_ro = ro;
+ palm27x_mci_platform_data.gpio_power = power;
+ palm27x_mci_platform_data.gpio_power_invert = power_inverted;
+
+ pxa_set_mci_info(&palm27x_mci_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#if defined(CONFIG_SUSPEND)
+void __init palm27x_pm_init(unsigned long str_base)
+{
+ static const unsigned long resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /*
+ * Copy the bootloader.
+ * NOTE: PalmZ72 uses a different wakeup method!
+ */
+ memcpy(phys_to_virt(str_base), resume, sizeof(resume));
+}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+struct pxafb_mode_info palm_320x480_lcd_mode = {
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+};
+
+struct pxafb_mode_info palm_320x320_lcd_mode = {
+ .pixclock = 115384,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 27,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 6,
+ .vsync_len = 1,
+};
+
+struct pxafb_mode_info palm_320x320_new_lcd_mode = {
+ .pixclock = 86538,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 20,
+ .right_margin = 8,
+ .upper_margin = 8,
+ .lower_margin = 5,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+};
+
+static struct pxafb_mach_info palm27x_lcd_screen = {
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int palm27x_lcd_power;
+static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
+{
+ gpio_set_value(palm27x_lcd_power, on);
+}
+
+void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
+{
+ palm27x_lcd_screen.modes = mode;
+
+ if (gpio_is_valid(power)) {
+ if (!gpio_request(power, "LCD power")) {
+ pr_err("Palm27x: failed to claim lcd power gpio!\n");
+ return;
+ }
+ if (!gpio_direction_output(power, 1)) {
+ pr_err("Palm27x: lcd power configuration failed!\n");
+ return;
+ }
+ palm27x_lcd_power = power;
+ palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
+ }
+
+ pxa_set_fb_info(NULL, &palm27x_lcd_screen);
+}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_PXA27X) || \
+ defined(CONFIG_USB_PXA27X_MODULE)
+static struct gpio_vbus_mach_info palm27x_udc_info = {
+ .gpio_vbus_inverted = 1,
+};
+
+static struct platform_device palm27x_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palm27x_udc_info,
+ },
+};
+
+void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
+{
+ palm27x_udc_info.gpio_vbus = vbus;
+ palm27x_udc_info.gpio_pullup = pullup;
+
+ palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
+
+ if (!gpio_request(pullup, "USB Pullup")) {
+ gpio_direction_output(pullup,
+ palm27x_udc_info.gpio_vbus_inverted);
+ gpio_free(pullup);
+ } else
+ return;
+
+ platform_device_register(&palm27x_gpio_vbus);
+}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data palm27x_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+void __init palm27x_irda_init(int pwdn)
+{
+ palm27x_ficp_platform_data.gpio_pwdown = pwdn;
+ pxa_set_ficp_info(&palm27x_ficp_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * WM97xx audio, battery
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+ defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+static struct wm97xx_batt_pdata palm27x_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+static struct wm97xx_pdata palm27x_wm97xx_pdata = {
+ .batt_pdata = &palm27x_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
+ .codec_pdata = { &palm27x_wm97xx_pdata, },
+};
+
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+ .jack_gpio = -1,
+};
+
+static struct platform_device palm27x_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palm27x_asoc_pdata,
+ },
+};
+
+void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
+{
+ palm27x_ac97_pdata.reset_gpio = reset;
+ palm27x_asoc_pdata.jack_gpio = jack;
+
+ if (minv < 0 || maxv < 0) {
+ palm27x_ac97_pdata.codec_pdata[0] = NULL;
+ pxa_set_ac97_info(&palm27x_ac97_pdata);
+ } else {
+ palm27x_batt_pdata.min_voltage = minv,
+ palm27x_batt_pdata.max_voltage = maxv,
+
+ pxa_set_ac97_info(&palm27x_ac97_pdata);
+ platform_device_register(&palm27x_asoc);
+ }
+}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palm27x_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024,
+ PWM_POLARITY_NORMAL),
+};
+
+static int palm_bl_power;
+static int palm_lcd_power;
+
+static int palm27x_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(palm_bl_power, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(palm_bl_power, 0);
+ if (ret)
+ goto err2;
+
+ if (gpio_is_valid(palm_lcd_power)) {
+ ret = gpio_request(palm_lcd_power, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(palm_lcd_power, 0);
+ if (ret)
+ goto err3;
+ }
+
+ return 0;
+err3:
+ gpio_free(palm_lcd_power);
+err2:
+ gpio_free(palm_bl_power);
+err:
+ return ret;
+}
+
+static int palm27x_backlight_notify(struct device *dev, int brightness)
+{
+ gpio_set_value(palm_bl_power, brightness);
+ if (gpio_is_valid(palm_lcd_power))
+ gpio_set_value(palm_lcd_power, brightness);
+ return brightness;
+}
+
+static void palm27x_backlight_exit(struct device *dev)
+{
+ gpio_free(palm_bl_power);
+ if (gpio_is_valid(palm_lcd_power))
+ gpio_free(palm_lcd_power);
+}
+
+static struct platform_pwm_backlight_data palm27x_backlight_data = {
+ .max_brightness = 0xfe,
+ .dft_brightness = 0x7e,
+ .enable_gpio = -1,
+ .init = palm27x_backlight_init,
+ .notify = palm27x_backlight_notify,
+ .exit = palm27x_backlight_exit,
+};
+
+static struct platform_device palm27x_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palm27x_backlight_data,
+ },
+};
+
+void __init palm27x_pwm_init(int bl, int lcd)
+{
+ palm_bl_power = bl;
+ palm_lcd_power = lcd;
+ pwm_add_table(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
+ platform_device_register(&palm27x_backlight);
+}
+#endif
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+static int palm_ac_state;
+static int palm_usb_state;
+
+static int palm27x_power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(palm_ac_state, "AC state");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(palm_ac_state);
+ if (ret)
+ goto err2;
+
+ if (gpio_is_valid(palm_usb_state)) {
+ ret = gpio_request(palm_usb_state, "USB state");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_input(palm_usb_state);
+ if (ret)
+ goto err3;
+ }
+
+ return 0;
+err3:
+ gpio_free(palm_usb_state);
+err2:
+ gpio_free(palm_ac_state);
+err1:
+ return ret;
+}
+
+static void palm27x_power_supply_exit(struct device *dev)
+{
+ gpio_free(palm_usb_state);
+ gpio_free(palm_ac_state);
+}
+
+static int palm27x_is_ac_online(void)
+{
+ return gpio_get_value(palm_ac_state);
+}
+
+static int palm27x_is_usb_online(void)
+{
+ return !gpio_get_value(palm_usb_state);
+}
+static char *palm27x_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata palm27x_ps_info = {
+ .init = palm27x_power_supply_init,
+ .exit = palm27x_power_supply_exit,
+ .is_ac_online = palm27x_is_ac_online,
+ .is_usb_online = palm27x_is_usb_online,
+ .supplied_to = palm27x_supplicants,
+ .num_supplicants = ARRAY_SIZE(palm27x_supplicants),
+};
+
+static struct platform_device palm27x_power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &palm27x_ps_info,
+ },
+};
+
+void __init palm27x_power_init(int ac, int usb)
+{
+ palm_ac_state = ac;
+ palm_usb_state = usb;
+ platform_device_register(&palm27x_power_supply);
+}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data palm27x_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = palm27x_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(palm27x_max1587a_consumers),
+};
+
+static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &palm27x_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data palm27x_max1587a_info = {
+ .subdevs = palm27x_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &palm27x_max1587a_info,
+ },
+};
+
+static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
+ .use_pio = 1,
+};
+
+void __init palm27x_pmic_init(void)
+{
+ i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
+ pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
+}
+#endif
diff --git a/arch/arm/mach-pxa/palm27x.h b/arch/arm/mach-pxa/palm27x.h
new file mode 100644
index 0000000..d4eac3d
--- /dev/null
+++ b/arch/arm/mach-pxa/palm27x.h
@@ -0,0 +1,81 @@
+/*
+ * Common functions for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __INCLUDE_MACH_PALM27X__
+#define __INCLUDE_MACH_PALM27X__
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void __init palm27x_mmc_init(int detect, int ro, int power,
+ int power_inverted);
+#else
+static inline void palm27x_mmc_init(int detect, int ro, int power,
+ int power_inverted)
+{}
+#endif
+
+#if defined(CONFIG_SUSPEND)
+extern void __init palm27x_pm_init(unsigned long str_base);
+#else
+static inline void palm27x_pm_init(unsigned long str_base) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern struct pxafb_mode_info palm_320x480_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
+extern void __init palm27x_lcd_init(int power,
+ struct pxafb_mode_info *mode);
+#else
+#define palm27x_lcd_init(power, mode) do {} while (0)
+#endif
+
+#if defined(CONFIG_USB_PXA27X) || \
+ defined(CONFIG_USB_PXA27X_MODULE)
+extern void __init palm27x_udc_init(int vbus, int pullup,
+ int vbus_inverted);
+#else
+static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
+#endif
+
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+extern void __init palm27x_irda_init(int pwdn);
+#else
+static inline void palm27x_irda_init(int pwdn) {}
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+ defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
+ int reset);
+#else
+static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
+#endif
+
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+extern void __init palm27x_pwm_init(int bl, int lcd);
+#else
+static inline void palm27x_pwm_init(int bl, int lcd) {}
+#endif
+
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+extern void __init palm27x_power_init(int ac, int usb);
+#else
+static inline void palm27x_power_init(int ac, int usb) {}
+#endif
+
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+extern void __init palm27x_pmic_init(void);
+#else
+static inline void palm27x_pmic_init(void) {}
+#endif
+
+#endif /* __INCLUDE_MACH_PALM27X__ */
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
new file mode 100644
index 0000000..980f284
--- /dev/null
+++ b/arch/arm/mach-pxa/palmld.c
@@ -0,0 +1,357 @@
+/*
+ * Hardware definitions for Palm LifeDrive
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Alex Osborne <ato@meshy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx.h>
+#include <linux/power_supply.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "pxa27x.h"
+#include <mach/audio.h>
+#include <mach/palmld.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/asoc-palm27x.h>
+#include "palm27x.h"
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmld_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO116_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
+
+ /* IrDA */
+ GPIO108_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* GPIO KEYS */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO12_GPIO, /* power switch */
+ GPIO15_GPIO, /* lock switch */
+
+ /* LEDs */
+ GPIO52_GPIO, /* green led */
+ GPIO94_GPIO, /* orange led */
+
+ /* PCMCIA */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO36_GPIO, /* wifi power */
+ GPIO38_GPIO, /* wifi ready */
+ GPIO81_GPIO, /* wifi reset */
+
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO39_FFUART_TXD,
+
+ /* HDD */
+ GPIO98_GPIO, /* HDD reset */
+ GPIO115_GPIO, /* HDD power */
+
+ /* MISC */
+ GPIO13_GPIO, /* earphone detect */
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition palmld_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data palmld_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = palmld_partitions,
+ .nr_parts = ARRAY_SIZE(palmld_partitions)
+ }
+};
+
+static struct resource palmld_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_4M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device palmld_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &palmld_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = palmld_flash_data,
+ },
+};
+
+static void __init palmld_nor_init(void)
+{
+ platform_device_register(&palmld_flash);
+}
+#else
+static inline void palmld_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int palmld_matrix_keys[] = {
+ KEY(0, 1, KEY_F2),
+ KEY(0, 2, KEY_UP),
+
+ KEY(1, 0, KEY_F3),
+ KEY(1, 1, KEY_F4),
+ KEY(1, 2, KEY_RIGHT),
+
+ KEY(2, 0, KEY_F1),
+ KEY(2, 1, KEY_F5),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_F6),
+ KEY(3, 1, KEY_ENTER),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct matrix_keymap_data palmld_matrix_keymap_data = {
+ .keymap = palmld_matrix_keys,
+ .keymap_size = ARRAY_SIZE(palmld_matrix_keys),
+};
+
+static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_keymap_data = &palmld_matrix_keymap_data,
+
+ .debounce_interval = 30,
+};
+
+static void __init palmld_kpc_init(void)
+{
+ pxa_set_keypad_info(&palmld_keypad_platform_data);
+}
+#else
+static inline void palmld_kpc_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button palmld_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+ {KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
+ {KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
+};
+
+static struct gpio_keys_platform_data palmld_pxa_keys_data = {
+ .buttons = palmld_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmld_pxa_buttons),
+};
+
+static struct platform_device palmld_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmld_pxa_keys_data,
+ },
+};
+
+static void __init palmld_keys_init(void)
+{
+ platform_device_register(&palmld_pxa_keys);
+}
+#else
+static inline void palmld_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led gpio_leds[] = {
+{
+ .name = "palmld:green:led",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMLD_LED_GREEN,
+}, {
+ .name = "palmld:amber:led",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMLD_LED_AMBER,
+},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmld_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ }
+};
+
+static void __init palmld_leds_init(void)
+{
+ platform_device_register(&palmld_leds);
+}
+#else
+static inline void palmld_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * HDD
+ ******************************************************************************/
+#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
+static struct platform_device palmld_ide_device = {
+ .name = "pata_palmld",
+ .id = -1,
+};
+
+static void __init palmld_ide_init(void)
+{
+ platform_device_register(&palmld_ide_device);
+}
+#else
+static inline void palmld_ide_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct map_desc palmld_io_desc[] __initdata = {
+{
+ .virtual = PALMLD_IDE_VIRT,
+ .pfn = __phys_to_pfn(PALMLD_IDE_PHYS),
+ .length = PALMLD_IDE_SIZE,
+ .type = MT_DEVICE
+},
+{
+ .virtual = PALMLD_USB_VIRT,
+ .pfn = __phys_to_pfn(PALMLD_USB_PHYS),
+ .length = PALMLD_USB_SIZE,
+ .type = MT_DEVICE
+},
+};
+
+static void __init palmld_map_io(void)
+{
+ pxa27x_map_io();
+ iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
+}
+
+static void __init palmld_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ palm27x_mmc_init(GPIO_NR_PALMLD_SD_DETECT_N, GPIO_NR_PALMLD_SD_READONLY,
+ GPIO_NR_PALMLD_SD_POWER, 0);
+ palm27x_pm_init(PALMLD_STR_BASE);
+ palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+ palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
+ palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
+ GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
+ palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
+ palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT,
+ GPIO_NR_PALMLD_USB_DETECT_N);
+ palm27x_pmic_init();
+ palmld_kpc_init();
+ palmld_keys_init();
+ palmld_nor_init();
+ palmld_leds_init();
+ palmld_ide_init();
+}
+
+MACHINE_START(PALMLD, "Palm LifeDrive")
+ .atag_offset = 0x100,
+ .map_io = palmld_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = palmld_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
new file mode 100644
index 0000000..876144a
--- /dev/null
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -0,0 +1,218 @@
+/*
+ * Hardware definitions for Palm Tungsten|T5
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Ales Snuparek <snuparek@atlas.cz>
+ * Justin Kendrick <twilightsentry@gmail.com>
+ * RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/memblock.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx.h>
+#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "pxa27x.h"
+#include <mach/audio.h>
+#include "palmt5.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include "udc.h"
+#include <linux/platform_data/asoc-palm27x.h>
+#include "palm27x.h"
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmt5_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO115_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
+
+ /* IrDA */
+ GPIO40_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* USB */
+ GPIO15_GPIO, /* usb detect */
+ GPIO93_GPIO, /* usb power */
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO39_FFUART_TXD,
+
+ /* MISC */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO90_GPIO, /* power detect */
+ GPIO107_GPIO, /* earphone detect */
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int palmt5_matrix_keys[] = {
+ KEY(0, 0, KEY_POWER),
+ KEY(0, 1, KEY_F1),
+ KEY(0, 2, KEY_ENTER),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_F3),
+ KEY(1, 2, KEY_F4),
+
+ KEY(2, 0, KEY_UP),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_RIGHT),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct matrix_keymap_data palmt5_matrix_keymap_data = {
+ .keymap = palmt5_matrix_keys,
+ .keymap_size = ARRAY_SIZE(palmt5_matrix_keys),
+};
+
+static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_keymap_data = &palmt5_matrix_keymap_data,
+
+ .debounce_interval = 30,
+};
+
+static void __init palmt5_kpc_init(void)
+{
+ pxa_set_keypad_info(&palmt5_keypad_platform_data);
+}
+#else
+static inline void palmt5_kpc_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button palmt5_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
+ .buttons = palmt5_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmt5_pxa_buttons),
+};
+
+static struct platform_device palmt5_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmt5_pxa_keys_data,
+ },
+};
+
+static void __init palmt5_keys_init(void)
+{
+ platform_device_register(&palmt5_pxa_keys);
+}
+#else
+static inline void palmt5_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init palmt5_reserve(void)
+{
+ memblock_reserve(0xa0200000, 0x1000);
+}
+
+static void __init palmt5_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ palm27x_mmc_init(GPIO_NR_PALMT5_SD_DETECT_N, GPIO_NR_PALMT5_SD_READONLY,
+ GPIO_NR_PALMT5_SD_POWER, 0);
+ palm27x_pm_init(PALMT5_STR_BASE);
+ palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+ palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
+ GPIO_NR_PALMT5_USB_PULLUP, 1);
+ palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
+ palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
+ GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
+ palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
+ palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1);
+ palm27x_pmic_init();
+ palmt5_kpc_init();
+ palmt5_keys_init();
+}
+
+MACHINE_START(PALMT5, "Palm Tungsten|T5")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .reserve = palmt5_reserve,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = palmt5_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.h b/arch/arm/mach-pxa/palmt5.h
new file mode 100644
index 0000000..f850cc9
--- /dev/null
+++ b/arch/arm/mach-pxa/palmt5.h
@@ -0,0 +1,86 @@
+/*
+ * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
+ *
+ * Authors: Ales Snuparek <snuparek@atlas.cz>
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Justin Kendrick <twilightsentry@gmail.com>
+ * RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMT5_H_
+#define _INCLUDE_PALMT5_H_
+
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMT5_GPIO_RESET 1
+
+#define GPIO_NR_PALMT5_POWER_DETECT 90
+#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N 10
+#define GPIO_NR_PALMT5_EARPHONE_DETECT 107
+
+/* SD/MMC */
+#define GPIO_NR_PALMT5_SD_DETECT_N 14
+#define GPIO_NR_PALMT5_SD_POWER 114
+#define GPIO_NR_PALMT5_SD_READONLY 115
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMT5_WM9712_IRQ 27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMT5_IR_DISABLE 40
+
+/* USB */
+#define GPIO_NR_PALMT5_USB_DETECT_N 15
+#define GPIO_NR_PALMT5_USB_PULLUP 93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMT5_BL_POWER 84
+#define GPIO_NR_PALMT5_LCD_POWER 96
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMT5_BT_POWER 17
+#define GPIO_NR_PALMT5_BT_RESET 83
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMT5_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N)
+#define IRQ_GPIO_PALMT5_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ)
+#define IRQ_GPIO_PALMT5_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT)
+#define IRQ_GPIO_PALMT5_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses */
+#define PALMT5_PHYS_RAM_START 0xa0000000
+#define PALMT5_PHYS_IO_START 0x40000000
+#define PALMT5_STR_BASE 0xa0200000
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME 21
+
+/* BATTERY */
+#define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMT5_BAT_MAX_CURRENT 0 /* unknown */
+#define PALMT5_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMT5_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMT5_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMT5_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+#define PALMT5_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMT5_MAX_INTENSITY 0xFE
+#define PALMT5_DEFAULT_INTENSITY 0x7E
+#define PALMT5_LIMIT_MASK 0x7F
+#define PALMT5_PRESCALER 0x3F
+#define PALMT5_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
new file mode 100644
index 0000000..1894659
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -0,0 +1,520 @@
+/*
+ * linux/arch/arm/mach-pxa/palmtc.c
+ *
+ * Support for the Palm Tungsten|C
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Petr Blaha <p3t3@centrum.cz>
+ * Chetan S. Kumar <shivakumar.chetan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/ucb1400.h>
+#include <linux/power_supply.h>
+#include <linux/gpio_keys.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "pxa25x.h"
+#include <mach/audio.h>
+#include <mach/palmtc.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include "udc.h"
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtc_pin_config[] __initdata = {
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+ GPIO12_GPIO, /* detect */
+ GPIO32_GPIO, /* power */
+ GPIO54_GPIO, /* r/o switch */
+
+ /* PCMCIA */
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO49_nPWE,
+ GPIO48_nPOE,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO57_nIOIS16,
+ GPIO56_nPWAIT,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO45_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO17_PWM1_OUT,
+
+ /* USB */
+ GPIO4_GPIO, /* detect */
+ GPIO36_GPIO, /* pullup */
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* MATRIX KEYPAD */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 0 */
+ GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 1 */
+ GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 2 */
+ GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 3 */
+ GPIO18_GPIO | MFP_LPM_DRIVE_LOW, /* out 0 */
+ GPIO19_GPIO | MFP_LPM_DRIVE_LOW, /* out 1 */
+ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* out 2 */
+ GPIO21_GPIO | MFP_LPM_DRIVE_LOW, /* out 3 */
+ GPIO22_GPIO | MFP_LPM_DRIVE_LOW, /* out 4 */
+ GPIO23_GPIO | MFP_LPM_DRIVE_LOW, /* out 5 */
+ GPIO24_GPIO | MFP_LPM_DRIVE_LOW, /* out 6 */
+ GPIO25_GPIO | MFP_LPM_DRIVE_LOW, /* out 7 */
+ GPIO26_GPIO | MFP_LPM_DRIVE_LOW, /* out 8 */
+ GPIO27_GPIO | MFP_LPM_DRIVE_LOW, /* out 9 */
+ GPIO79_GPIO | MFP_LPM_DRIVE_LOW, /* out 10 */
+ GPIO80_GPIO | MFP_LPM_DRIVE_LOW, /* out 11 */
+
+ /* PXA GPIO KEYS */
+ GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH, /* hotsync button on cradle */
+
+ /* MISC */
+ GPIO1_RST, /* reset */
+ GPIO2_GPIO, /* earphone detect */
+ GPIO16_GPIO, /* backlight switch */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data palmtc_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = GPIO_NR_PALMTC_SD_POWER,
+ .gpio_card_ro = GPIO_NR_PALMTC_SD_READONLY,
+ .gpio_card_detect = GPIO_NR_PALMTC_SD_DETECT_N,
+ .detect_delay_ms = 200,
+};
+
+static void __init palmtc_mmc_init(void)
+{
+ pxa_set_mci_info(&palmtc_mci_platform_data);
+}
+#else
+static inline void palmtc_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button palmtc_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
+};
+
+static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
+ .buttons = palmtc_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmtc_pxa_buttons),
+};
+
+static struct platform_device palmtc_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_pxa_keys_data,
+ },
+};
+
+static void __init palmtc_keys_init(void)
+{
+ platform_device_register(&palmtc_pxa_keys);
+}
+#else
+static inline void palmtc_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palmtc_pwm_lookup[] = {
+ PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data palmtc_backlight_data = {
+ .max_brightness = PALMTC_MAX_INTENSITY,
+ .dft_brightness = PALMTC_MAX_INTENSITY,
+ .enable_gpio = GPIO_NR_PALMTC_BL_POWER,
+};
+
+static struct platform_device palmtc_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa25x_device_pwm1.dev,
+ .platform_data = &palmtc_backlight_data,
+ },
+};
+
+static void __init palmtc_pwm_init(void)
+{
+ pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
+ platform_device_register(&palmtc_backlight);
+}
+#else
+static inline void palmtc_pwm_init(void) {}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data palmtc_ficp_platform_data = {
+ .gpio_pwdown = GPIO_NR_PALMTC_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+static void __init palmtc_irda_init(void)
+{
+ pxa_set_ficp_info(&palmtc_ficp_platform_data);
+}
+#else
+static inline void palmtc_irda_init(void) {}
+#endif
+
+/******************************************************************************
+ * Keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
+static const uint32_t palmtc_matrix_keys[] = {
+ KEY(0, 0, KEY_F1),
+ KEY(0, 1, KEY_X),
+ KEY(0, 2, KEY_POWER),
+ KEY(0, 3, KEY_TAB),
+ KEY(0, 4, KEY_A),
+ KEY(0, 5, KEY_Q),
+ KEY(0, 6, KEY_LEFTSHIFT),
+ KEY(0, 7, KEY_Z),
+ KEY(0, 8, KEY_S),
+ KEY(0, 9, KEY_W),
+ KEY(0, 10, KEY_E),
+ KEY(0, 11, KEY_UP),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 3, KEY_D),
+ KEY(1, 4, KEY_C),
+ KEY(1, 5, KEY_F),
+ KEY(1, 6, KEY_R),
+ KEY(1, 7, KEY_SPACE),
+ KEY(1, 8, KEY_V),
+ KEY(1, 9, KEY_G),
+ KEY(1, 10, KEY_T),
+ KEY(1, 11, KEY_LEFT),
+
+ KEY(2, 0, KEY_F3),
+ KEY(2, 1, KEY_LEFTCTRL),
+ KEY(2, 3, KEY_H),
+ KEY(2, 4, KEY_Y),
+ KEY(2, 5, KEY_N),
+ KEY(2, 6, KEY_J),
+ KEY(2, 7, KEY_U),
+ KEY(2, 8, KEY_M),
+ KEY(2, 9, KEY_K),
+ KEY(2, 10, KEY_I),
+ KEY(2, 11, KEY_RIGHT),
+
+ KEY(3, 0, KEY_F4),
+ KEY(3, 1, KEY_ENTER),
+ KEY(3, 3, KEY_DOT),
+ KEY(3, 4, KEY_L),
+ KEY(3, 5, KEY_O),
+ KEY(3, 6, KEY_LEFTALT),
+ KEY(3, 7, KEY_ENTER),
+ KEY(3, 8, KEY_BACKSPACE),
+ KEY(3, 9, KEY_P),
+ KEY(3, 10, KEY_B),
+ KEY(3, 11, KEY_FN),
+};
+
+const struct matrix_keymap_data palmtc_keymap_data = {
+ .keymap = palmtc_matrix_keys,
+ .keymap_size = ARRAY_SIZE(palmtc_matrix_keys),
+};
+
+static const unsigned int palmtc_keypad_row_gpios[] = {
+ 0, 9, 10, 11
+};
+
+static const unsigned int palmtc_keypad_col_gpios[] = {
+ 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
+};
+
+static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
+ .keymap_data = &palmtc_keymap_data,
+ .row_gpios = palmtc_keypad_row_gpios,
+ .num_row_gpios = ARRAY_SIZE(palmtc_keypad_row_gpios),
+ .col_gpios = palmtc_keypad_col_gpios,
+ .num_col_gpios = ARRAY_SIZE(palmtc_keypad_col_gpios),
+ .active_low = 1,
+
+ .debounce_ms = 20,
+ .col_scan_delay_us = 5,
+};
+
+static struct platform_device palmtc_keyboard = {
+ .name = "matrix-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_keypad_platform_data,
+ },
+};
+static void __init palmtc_mkp_init(void)
+{
+ platform_device_register(&palmtc_keyboard);
+}
+#else
+static inline void palmtc_mkp_init(void) {}
+#endif
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
+static struct gpio_vbus_mach_info palmtc_udc_info = {
+ .gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_PALMTC_USB_POWER,
+};
+
+static struct platform_device palmtc_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_udc_info,
+ },
+};
+
+static void __init palmtc_udc_init(void)
+{
+ platform_device_register(&palmtc_gpio_vbus);
+};
+#else
+static inline void palmtc_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * Touchscreen / Battery / GPIO-extender
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device palmtc_ucb1400_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+};
+
+static void __init palmtc_ts_init(void)
+{
+ pxa_set_ac97_info(NULL);
+ platform_device_register(&palmtc_ucb1400_device);
+}
+#else
+static inline void palmtc_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led palmtc_gpio_leds[] = {
+{
+ .name = "palmtc:green:user",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMTC_LED_POWER,
+ .active_low = 1,
+}, {
+ .name = "palmtc:vibra:vibra",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMTC_VIBRA_POWER,
+ .active_low = 1,
+}
+
+};
+
+static struct gpio_led_platform_data palmtc_gpio_led_info = {
+ .leds = palmtc_gpio_leds,
+ .num_leds = ARRAY_SIZE(palmtc_gpio_leds),
+};
+
+static struct platform_device palmtc_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_gpio_led_info,
+ }
+};
+
+static void __init palmtc_leds_init(void)
+{
+ platform_device_register(&palmtc_leds);
+}
+#else
+static inline void palmtc_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct resource palmtc_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition palmtc_flash_parts[] = {
+ {
+ .name = "U-Boot Bootloader",
+ .offset = 0x0,
+ .size = 0x40000,
+ },
+ {
+ .name = "Linux Kernel",
+ .offset = 0x40000,
+ .size = 0x2c0000,
+ },
+ {
+ .name = "Filesystem",
+ .offset = 0x300000,
+ .size = 0xcc0000,
+ },
+ {
+ .name = "U-Boot Environment",
+ .offset = 0xfc0000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data palmtc_flash_data = {
+ .width = 4,
+ .parts = palmtc_flash_parts,
+ .nr_parts = ARRAY_SIZE(palmtc_flash_parts),
+};
+
+static struct platform_device palmtc_flash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &palmtc_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &palmtc_flash_data,
+ },
+};
+
+static void __init palmtc_nor_init(void)
+{
+ platform_device_register(&palmtc_flash);
+}
+#else
+static inline void palmtc_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info palmtc_lcd_modes[] = {
+ {
+ .pixclock = 115384,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 27,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 6,
+ .vsync_len = 1,
+ },
+};
+
+static struct pxafb_mach_info palmtc_lcd_screen = {
+ .modes = palmtc_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmtc_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init palmtc_lcd_init(void)
+{
+ pxa_set_fb_info(NULL, &palmtc_lcd_screen);
+}
+#else
+static inline void palmtc_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init palmtc_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_hwuart_info(NULL);
+
+ palmtc_mmc_init();
+ palmtc_keys_init();
+ palmtc_pwm_init();
+ palmtc_irda_init();
+ palmtc_mkp_init();
+ palmtc_udc_init();
+ palmtc_ts_init();
+ palmtc_nor_init();
+ palmtc_lcd_init();
+ palmtc_leds_init();
+};
+
+MACHINE_START(PALMTC, "Palm Tungsten|C")
+ .atag_offset = 0x100,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = palmtc_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
new file mode 100644
index 0000000..36b4614
--- /dev/null
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -0,0 +1,375 @@
+/*
+ * Hardware definitions for Palm Tungsten|E2
+ *
+ * Author:
+ * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
+ *
+ * Rewrite for mainline:
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx.h>
+#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "pxa25x.h"
+#include <mach/audio.h>
+#include "palmte2.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include "udc.h"
+#include <linux/platform_data/asoc-palm27x.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmte2_pin_config[] __initdata = {
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+ GPIO10_GPIO, /* SD detect */
+ GPIO55_GPIO, /* SD power */
+ GPIO51_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO15_GPIO, /* usb detect */
+ GPIO53_GPIO, /* usb power */
+
+ /* IrDA */
+ GPIO48_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* GPIO KEYS */
+ GPIO5_GPIO, /* notes */
+ GPIO7_GPIO, /* tasks */
+ GPIO11_GPIO, /* calendar */
+ GPIO13_GPIO, /* contacts */
+ GPIO14_GPIO, /* center */
+ GPIO19_GPIO, /* left */
+ GPIO20_GPIO, /* right */
+ GPIO21_GPIO, /* down */
+ GPIO22_GPIO, /* up */
+
+ /* MISC */
+ GPIO1_RST, /* reset */
+ GPIO4_GPIO, /* Hotsync button */
+ GPIO9_GPIO, /* power detect */
+ GPIO15_GPIO, /* earphone detect */
+ GPIO37_GPIO, /* LCD power */
+ GPIO56_GPIO, /* Backlight power */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static struct pxamci_platform_data palmte2_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_PALMTE2_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_PALMTE2_SD_READONLY,
+ .gpio_power = GPIO_NR_PALMTE2_SD_POWER,
+};
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmte2_pxa_buttons[] = {
+ {KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" },
+ {KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" },
+ {KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" },
+ {KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" },
+ {KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" },
+ {KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" },
+ {KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" },
+ {KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" },
+ {KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" },
+};
+
+static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
+ .buttons = palmte2_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmte2_pxa_buttons),
+};
+
+static struct platform_device palmte2_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte2_pxa_keys_data,
+ },
+};
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static struct pwm_lookup palmte2_pwm_lookup[] = {
+ PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL,
+ PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL),
+};
+
+static struct gpio palmte_bl_gpios[] = {
+ { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
+ { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
+};
+
+static int palmte2_backlight_init(struct device *dev)
+{
+ return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
+}
+
+static int palmte2_backlight_notify(struct device *dev, int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmte2_backlight_exit(struct device *dev)
+{
+ gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
+}
+
+static struct platform_pwm_backlight_data palmte2_backlight_data = {
+ .max_brightness = PALMTE2_MAX_INTENSITY,
+ .dft_brightness = PALMTE2_MAX_INTENSITY,
+ .enable_gpio = -1,
+ .init = palmte2_backlight_init,
+ .notify = palmte2_backlight_notify,
+ .exit = palmte2_backlight_exit,
+};
+
+static struct platform_device palmte2_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa25x_device_pwm0.dev,
+ .platform_data = &palmte2_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static struct pxaficp_platform_data palmte2_ficp_platform_data = {
+ .gpio_pwdown = GPIO_NR_PALMTE2_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct gpio_vbus_mach_info palmte2_udc_info = {
+ .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP,
+};
+
+static struct platform_device palmte2_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte2_udc_info,
+ },
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int palmte2_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
+}
+
+static char *palmte2_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmte2_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmte2_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmte2_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * WM97xx audio, battery
+ ******************************************************************************/
+static struct wm97xx_batt_pdata palmte2_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMTE2_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMTE2_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+static struct wm97xx_pdata palmte2_wm97xx_pdata = {
+ .batt_pdata = &palmte2_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
+ .codec_pdata = { &palmte2_wm97xx_pdata, },
+};
+
+static struct palm27x_asoc_info palmte2_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMTE2_EARPHONE_DETECT,
+};
+
+static struct platform_device palmte2_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte2_asoc_pdata,
+ },
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmte2_lcd_modes[] = {
+{
+ .pixclock = 77757,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 28,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 5,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmte2_lcd_screen = {
+ .modes = palmte2_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmte2_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmte2_pxa_keys,
+#endif
+ &palmte2_backlight,
+ &power_supply,
+ &palmte2_asoc,
+ &palmte2_gpio_vbus,
+};
+
+/* setup udc GPIOs initial state */
+static void __init palmte2_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
+ }
+}
+
+static void __init palmte2_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ pxa_set_fb_info(NULL, &palmte2_lcd_screen);
+ pxa_set_mci_info(&palmte2_mci_platform_data);
+ palmte2_udc_init();
+ pxa_set_ac97_info(&palmte2_ac97_pdata);
+ pxa_set_ficp_info(&palmte2_ficp_platform_data);
+
+ pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTE2, "Palm Tungsten|E2")
+ .atag_offset = 0x100,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = palmte2_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.h b/arch/arm/mach-pxa/palmte2.h
new file mode 100644
index 0000000..f89e989
--- /dev/null
+++ b/arch/arm/mach-pxa/palmte2.h
@@ -0,0 +1,68 @@
+/*
+ * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
+ *
+ * Author:
+ * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTE2_H_
+#define _INCLUDE_PALMTE2_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTE2_POWER_DETECT 9
+#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N 4
+#define GPIO_NR_PALMTE2_EARPHONE_DETECT 15
+
+/* SD/MMC */
+#define GPIO_NR_PALMTE2_SD_DETECT_N 10
+#define GPIO_NR_PALMTE2_SD_POWER 55
+#define GPIO_NR_PALMTE2_SD_READONLY 51
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMTE2_IR_DISABLE 48
+
+/* USB */
+#define GPIO_NR_PALMTE2_USB_DETECT_N 35
+#define GPIO_NR_PALMTE2_USB_PULLUP 53
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTE2_BL_POWER 56
+#define GPIO_NR_PALMTE2_LCD_POWER 37
+
+/* KEYS */
+#define GPIO_NR_PALMTE2_KEY_NOTES 5
+#define GPIO_NR_PALMTE2_KEY_TASKS 7
+#define GPIO_NR_PALMTE2_KEY_CALENDAR 11
+#define GPIO_NR_PALMTE2_KEY_CONTACTS 13
+#define GPIO_NR_PALMTE2_KEY_CENTER 14
+#define GPIO_NR_PALMTE2_KEY_LEFT 19
+#define GPIO_NR_PALMTE2_KEY_RIGHT 20
+#define GPIO_NR_PALMTE2_KEY_DOWN 21
+#define GPIO_NR_PALMTE2_KEY_UP 22
+
+/** HERE ARE INIT VALUES **/
+
+/* BACKLIGHT */
+#define PALMTE2_MAX_INTENSITY 0xFE
+#define PALMTE2_DEFAULT_INTENSITY 0x7E
+#define PALMTE2_LIMIT_MASK 0x7F
+#define PALMTE2_PRESCALER 0x3F
+#define PALMTE2_PERIOD_NS 3500
+
+/* BATTERY */
+#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMTE2_BAT_MAX_CURRENT 0 /* unknown */
+#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMTE2_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+#endif
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
new file mode 100644
index 0000000..4cc05ec
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -0,0 +1,560 @@
+/*
+ * Hardware definitions for Palm Treo smartphones
+ *
+ * currently supported:
+ * Palm Treo 680 (GSM)
+ * Palm Centro 685 (GSM)
+ *
+ * Author: Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/memblock.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/power_supply.h>
+#include <linux/w1-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
+#include <mach/audio.h>
+#include "palmtreo.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include "udc.h"
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <mach/pxa2xx-regs.h>
+#include <linux/platform_data/asoc-palm27x.h>
+#include <linux/platform_data/media/camera-pxa.h>
+#include "palm27x.h"
+
+#include <sound/pxa2xx-lib.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long treo_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO113_GPIO, /* SD detect */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
+
+ /* IrDA */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */
+
+ /* MATRIX KEYPAD */
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO98_KP_MKIN_4,
+ GPIO91_KP_MKIN_6,
+ GPIO13_KP_MKIN_7,
+ GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+ GPIO96_KP_MKOUT_6,
+ GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */
+
+ /* Quick Capture Interface */
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO81_CIF_DD_0,
+ GPIO55_CIF_DD_1,
+ GPIO51_CIF_DD_2,
+ GPIO50_CIF_DD_3,
+ GPIO52_CIF_DD_4,
+ GPIO48_CIF_DD_5,
+ GPIO17_CIF_DD_6,
+ GPIO12_CIF_DD_7,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* GSM */
+ GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH, /* GSM host wake up */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO39_FFUART_TXD,
+ GPIO41_FFUART_RTS,
+
+ /* MISC. */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* external power detect */
+ GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* silent switch */
+ GPIO116_GPIO, /* headphone detect */
+ GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */
+};
+
+#ifdef CONFIG_MACH_TREO680
+static unsigned long treo680_pin_config[] __initdata = {
+ GPIO33_GPIO, /* SD read only */
+
+ /* MATRIX KEYPAD - different wake up source */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO99_KP_MKIN_5,
+
+ /* LCD... L_BIAS alt fn not configured on Treo680; is GPIO instead */
+ GPIOxx_LCD_16BPP,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static unsigned long centro685_pin_config[] __initdata = {
+ /* Bluetooth attached to BT UART*/
+ MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW), /* power: LOW = off */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* MATRIX KEYPAD - different wake up source */
+ GPIO100_KP_MKIN_0,
+ GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if IS_ENABLED(CONFIG_KEYBOARD_PXA27x)
+static const unsigned int treo680_matrix_keys[] = {
+ KEY(0, 0, KEY_F8), /* Red/Off/Power */
+ KEY(0, 1, KEY_LEFT),
+ KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
+ KEY(0, 3, KEY_L),
+ KEY(0, 4, KEY_A),
+ KEY(0, 5, KEY_Q),
+ KEY(0, 6, KEY_P),
+
+ KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
+ KEY(1, 1, KEY_RIGHT),
+ KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
+ KEY(1, 3, KEY_Z),
+ KEY(1, 4, KEY_S),
+ KEY(1, 5, KEY_W),
+
+ KEY(2, 0, KEY_F1), /* Phone */
+ KEY(2, 1, KEY_UP),
+ KEY(2, 2, KEY_0),
+ KEY(2, 3, KEY_X),
+ KEY(2, 4, KEY_D),
+ KEY(2, 5, KEY_E),
+
+ KEY(3, 0, KEY_F10), /* Calendar */
+ KEY(3, 1, KEY_DOWN),
+ KEY(3, 2, KEY_SPACE),
+ KEY(3, 3, KEY_C),
+ KEY(3, 4, KEY_F),
+ KEY(3, 5, KEY_R),
+
+ KEY(4, 0, KEY_F12), /* Mail */
+ KEY(4, 1, KEY_KPENTER),
+ KEY(4, 2, KEY_RIGHTALT), /* Alt */
+ KEY(4, 3, KEY_V),
+ KEY(4, 4, KEY_G),
+ KEY(4, 5, KEY_T),
+
+ KEY(5, 0, KEY_F9), /* Home */
+ KEY(5, 1, KEY_PAGEUP), /* Side up */
+ KEY(5, 2, KEY_DOT),
+ KEY(5, 3, KEY_B),
+ KEY(5, 4, KEY_H),
+ KEY(5, 5, KEY_Y),
+
+ KEY(6, 0, KEY_TAB), /* Side Activate */
+ KEY(6, 1, KEY_PAGEDOWN), /* Side down */
+ KEY(6, 2, KEY_ENTER),
+ KEY(6, 3, KEY_N),
+ KEY(6, 4, KEY_J),
+ KEY(6, 5, KEY_U),
+
+ KEY(7, 0, KEY_F6), /* Green/Call */
+ KEY(7, 1, KEY_O),
+ KEY(7, 2, KEY_BACKSPACE),
+ KEY(7, 3, KEY_M),
+ KEY(7, 4, KEY_K),
+ KEY(7, 5, KEY_I),
+};
+
+static const unsigned int centro_matrix_keys[] = {
+ KEY(0, 0, KEY_F9), /* Home */
+ KEY(0, 1, KEY_LEFT),
+ KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
+ KEY(0, 3, KEY_L),
+ KEY(0, 4, KEY_A),
+ KEY(0, 5, KEY_Q),
+ KEY(0, 6, KEY_P),
+
+ KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
+ KEY(1, 1, KEY_RIGHT),
+ KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
+ KEY(1, 3, KEY_Z),
+ KEY(1, 4, KEY_S),
+ KEY(1, 5, KEY_W),
+
+ KEY(2, 0, KEY_F1), /* Phone */
+ KEY(2, 1, KEY_UP),
+ KEY(2, 2, KEY_0),
+ KEY(2, 3, KEY_X),
+ KEY(2, 4, KEY_D),
+ KEY(2, 5, KEY_E),
+
+ KEY(3, 0, KEY_F10), /* Calendar */
+ KEY(3, 1, KEY_DOWN),
+ KEY(3, 2, KEY_SPACE),
+ KEY(3, 3, KEY_C),
+ KEY(3, 4, KEY_F),
+ KEY(3, 5, KEY_R),
+
+ KEY(4, 0, KEY_F12), /* Mail */
+ KEY(4, 1, KEY_KPENTER),
+ KEY(4, 2, KEY_RIGHTALT), /* Alt */
+ KEY(4, 3, KEY_V),
+ KEY(4, 4, KEY_G),
+ KEY(4, 5, KEY_T),
+
+ KEY(5, 0, KEY_F8), /* Red/Off/Power */
+ KEY(5, 1, KEY_PAGEUP), /* Side up */
+ KEY(5, 2, KEY_DOT),
+ KEY(5, 3, KEY_B),
+ KEY(5, 4, KEY_H),
+ KEY(5, 5, KEY_Y),
+
+ KEY(6, 0, KEY_TAB), /* Side Activate */
+ KEY(6, 1, KEY_PAGEDOWN), /* Side down */
+ KEY(6, 2, KEY_ENTER),
+ KEY(6, 3, KEY_N),
+ KEY(6, 4, KEY_J),
+ KEY(6, 5, KEY_U),
+
+ KEY(7, 0, KEY_F6), /* Green/Call */
+ KEY(7, 1, KEY_O),
+ KEY(7, 2, KEY_BACKSPACE),
+ KEY(7, 3, KEY_M),
+ KEY(7, 4, KEY_K),
+ KEY(7, 5, KEY_I),
+};
+
+static struct matrix_keymap_data treo680_matrix_keymap_data = {
+ .keymap = treo680_matrix_keys,
+ .keymap_size = ARRAY_SIZE(treo680_matrix_keys),
+};
+
+static struct matrix_keymap_data centro_matrix_keymap_data = {
+ .keymap = centro_matrix_keys,
+ .keymap_size = ARRAY_SIZE(centro_matrix_keys),
+};
+
+static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
+ .matrix_key_rows = 8,
+ .matrix_key_cols = 7,
+ .matrix_keymap_data = &treo680_matrix_keymap_data,
+ .direct_key_map = { KEY_CONNECT },
+ .direct_key_num = 1,
+
+ .debounce_interval = 30,
+};
+
+static void __init palmtreo_kpc_init(void)
+{
+ static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
+
+ if (machine_is_centro())
+ data->matrix_keymap_data = ¢ro_matrix_keymap_data;
+
+ pxa_set_keypad_info(&treo680_keypad_pdata);
+}
+#else
+static inline void palmtreo_kpc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB host
+ ******************************************************************************/
+#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
+static struct pxaohci_platform_data treo680_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT3,
+ .power_budget = 0,
+};
+
+static void __init palmtreo_uhc_init(void)
+{
+ if (machine_is_treo680())
+ pxa_set_ohci_info(&treo680_ohci_info);
+}
+#else
+static inline void palmtreo_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * Vibra and LEDs
+ ******************************************************************************/
+static struct gpio_led treo680_gpio_leds[] = {
+ {
+ .name = "treo680:vibra:vibra",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_TREO680_VIBRATE_EN,
+ },
+ {
+ .name = "treo680:green:led",
+ .default_trigger = "mmc0",
+ .gpio = GPIO_NR_TREO_GREEN_LED,
+ },
+ {
+ .name = "treo680:white:keybbl",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_TREO680_KEYB_BL,
+ },
+};
+
+static struct gpio_led_platform_data treo680_gpio_led_info = {
+ .leds = treo680_gpio_leds,
+ .num_leds = ARRAY_SIZE(treo680_gpio_leds),
+};
+
+static struct gpio_led centro_gpio_leds[] = {
+ {
+ .name = "centro:vibra:vibra",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_CENTRO_VIBRATE_EN,
+ },
+ {
+ .name = "centro:green:led",
+ .default_trigger = "mmc0",
+ .gpio = GPIO_NR_TREO_GREEN_LED,
+ },
+ {
+ .name = "centro:white:keybbl",
+ .default_trigger = "none",
+ .active_low = 1,
+ .gpio = GPIO_NR_CENTRO_KEYB_BL,
+ },
+};
+
+static struct gpio_led_platform_data centro_gpio_led_info = {
+ .leds = centro_gpio_leds,
+ .num_leds = ARRAY_SIZE(centro_gpio_leds),
+};
+
+static struct platform_device palmtreo_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+};
+
+static void __init palmtreo_leds_init(void)
+{
+ if (machine_is_centro())
+ palmtreo_leds.dev.platform_data = ¢ro_gpio_led_info;
+ else if (machine_is_treo680())
+ palmtreo_leds.dev.platform_data = &treo680_gpio_led_info;
+
+ platform_device_register(&palmtreo_leds);
+}
+
+/******************************************************************************
+ * diskonchip docg4 flash
+ ******************************************************************************/
+#if defined(CONFIG_MACH_TREO680)
+/* REVISIT: does the centro have this device also? */
+#if IS_ENABLED(CONFIG_MTD_NAND_DOCG4)
+static struct resource docg4_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x00001FFF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device treo680_docg4_flash = {
+ .name = "docg4",
+ .id = -1,
+ .resource = docg4_resources,
+ .num_resources = ARRAY_SIZE(docg4_resources),
+};
+
+static void __init treo680_docg4_flash_init(void)
+{
+ platform_device_register(&treo680_docg4_flash);
+}
+#else
+static inline void treo680_docg4_flash_init(void) {}
+#endif
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init treo_reserve(void)
+{
+ memblock_reserve(0xa0000000, 0x1000);
+ memblock_reserve(0xa2000000, 0x1000);
+}
+
+static void __init palmphone_common_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ palm27x_pm_init(TREO_STR_BASE);
+ palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
+ palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
+ palm27x_irda_init(GPIO_NR_TREO_IR_EN);
+ palm27x_ac97_init(-1, -1, -1, 95);
+ palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
+ palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
+ palm27x_pmic_init();
+ palmtreo_kpc_init();
+ palmtreo_uhc_init();
+ palmtreo_leds_init();
+}
+
+#ifdef CONFIG_MACH_TREO680
+void __init treo680_gpio_init(void)
+{
+ unsigned int gpio;
+
+ /* drive all three lcd gpios high initially */
+ const unsigned long lcd_flags = GPIOF_INIT_HIGH | GPIOF_DIR_OUT;
+
+ /*
+ * LCD GPIO initialization...
+ */
+
+ /*
+ * This is likely the power to the lcd. Toggling it low/high appears to
+ * turn the lcd off/on. Can be toggled after lcd is initialized without
+ * any apparent adverse effects to the lcd operation. Note that this
+ * gpio line is used by the lcd controller as the L_BIAS signal, but
+ * treo680 configures it as gpio.
+ */
+ gpio = GPIO_NR_TREO680_LCD_POWER;
+ if (gpio_request_one(gpio, lcd_flags, "LCD power") < 0)
+ goto fail;
+
+ /*
+ * These two are called "enables", for lack of a better understanding.
+ * If either of these are toggled after the lcd is initialized, the
+ * image becomes degraded. N.B. The IPL shipped with the treo
+ * configures GPIO_NR_TREO680_LCD_EN_N as output and drives it high. If
+ * the IPL is ever reprogrammed, this initialization may be need to be
+ * revisited.
+ */
+ gpio = GPIO_NR_TREO680_LCD_EN;
+ if (gpio_request_one(gpio, lcd_flags, "LCD enable") < 0)
+ goto fail;
+ gpio = GPIO_NR_TREO680_LCD_EN_N;
+ if (gpio_request_one(gpio, lcd_flags, "LCD enable_n") < 0)
+ goto fail;
+
+ /* driving this low turns LCD on */
+ gpio_set_value(GPIO_NR_TREO680_LCD_EN_N, 0);
+
+ return;
+ fail:
+ pr_err("gpio %d initialization failed\n", gpio);
+ gpio_free(GPIO_NR_TREO680_LCD_POWER);
+ gpio_free(GPIO_NR_TREO680_LCD_EN);
+ gpio_free(GPIO_NR_TREO680_LCD_EN_N);
+}
+
+static void __init treo680_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
+ palmphone_common_init();
+ treo680_gpio_init();
+ palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
+ GPIO_NR_TREO680_SD_POWER, 0);
+ treo680_docg4_flash_init();
+}
+#endif
+
+#ifdef CONFIG_MACH_CENTRO
+static void __init centro_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+ palmphone_common_init();
+ palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
+ GPIO_NR_CENTRO_SD_POWER, 1);
+}
+#endif
+
+#ifdef CONFIG_MACH_TREO680
+MACHINE_START(TREO680, "Palm Treo 680")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .reserve = treo_reserve,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = treo680_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_CENTRO
+MACHINE_START(CENTRO, "Palm Centro 685")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .reserve = treo_reserve,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = centro_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/palmtreo.h b/arch/arm/mach-pxa/palmtreo.h
new file mode 100644
index 0000000..714b657
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtreo.h
@@ -0,0 +1,68 @@
+/*
+ * GPIOs and interrupts for Palm Treo smartphones
+ *
+ * currently supported:
+ * Palm Treo 680 (GSM)
+ * Palm Centro 685 (GSM)
+ *
+ * Author: Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * find more info at www.hackndev.com
+ *
+ */
+
+#ifndef _INCLUDE_TREO_H_
+#define _INCLUDE_TREO_H_
+
+/* GPIOs */
+#define GPIO_NR_TREO_POWER_DETECT 0
+#define GPIO_NR_TREO_AMP_EN 27
+#define GPIO_NR_TREO_GREEN_LED 20
+#define GPIO_NR_TREO_RED_LED 79
+#define GPIO_NR_TREO_SD_DETECT_N 113
+#define GPIO_NR_TREO_EP_DETECT_N 116
+#define GPIO_NR_TREO_USB_DETECT 1
+#define GPIO_NR_TREO_USB_PULLUP 114
+#define GPIO_NR_TREO_GSM_POWER 40
+#define GPIO_NR_TREO_GSM_RESET 87
+#define GPIO_NR_TREO_GSM_WAKE 57
+#define GPIO_NR_TREO_GSM_HOST_WAKE 14
+#define GPIO_NR_TREO_GSM_TRIGGER 10
+#define GPIO_NR_TREO_IR_EN 115
+#define GPIO_NR_TREO_IR_TXD 47
+#define GPIO_NR_TREO_BL_POWER 38
+#define GPIO_NR_TREO_LCD_POWER 25
+
+/* Treo680 specific GPIOs */
+#define GPIO_NR_TREO680_SD_READONLY 33
+#define GPIO_NR_TREO680_SD_POWER 42
+#define GPIO_NR_TREO680_VIBRATE_EN 44
+#define GPIO_NR_TREO680_KEYB_BL 24
+#define GPIO_NR_TREO680_BT_EN 43
+#define GPIO_NR_TREO680_LCD_POWER 77
+#define GPIO_NR_TREO680_LCD_EN 86
+#define GPIO_NR_TREO680_LCD_EN_N 25
+
+/* Centro685 specific GPIOs */
+#define GPIO_NR_CENTRO_SD_POWER 21
+#define GPIO_NR_CENTRO_VIBRATE_EN 22
+#define GPIO_NR_CENTRO_KEYB_BL 33
+#define GPIO_NR_CENTRO_BT_EN 80
+
+/* Various addresses */
+#define TREO_PHYS_RAM_START 0xa0000000
+#define TREO_PHYS_IO_START 0x40000000
+#define TREO_STR_BASE 0xa2000000
+
+/* BACKLIGHT */
+#define TREO_MAX_INTENSITY 254
+#define TREO_DEFAULT_INTENSITY 160
+#define TREO_LIMIT_MASK 0x7F
+#define TREO_PRESCALER 63
+#define TREO_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
new file mode 100644
index 0000000..47e3e38
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -0,0 +1,376 @@
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Alex Osborne <ato@meshy.org>
+ * Cristiano P. <cristianop@users.sourceforge.net>
+ * Jan Herman <2hp@seznam.cz>
+ * Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx.h>
+#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "pxa27x.h"
+#include <mach/audio.h>
+#include <mach/palmtx.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include "udc.h"
+#include <linux/platform_data/asoc-palm27x.h>
+#include "palm27x.h"
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO115_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
+
+ /* IrDA */
+ GPIO40_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO13_GPIO, /* usb detect */
+ GPIO93_GPIO, /* usb power */
+
+ /* PCMCIA */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO94_GPIO, /* wifi power 1 */
+ GPIO108_GPIO, /* wifi power 2 */
+ GPIO116_GPIO, /* wifi ready */
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO39_FFUART_TXD,
+
+ /* NAND */
+ GPIO15_nCS_1,
+ GPIO18_RDY,
+
+ /* MISC. */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO12_GPIO, /* power detect */
+ GPIO107_GPIO, /* earphone detect */
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition palmtx_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data palmtx_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = palmtx_partitions,
+ .nr_parts = ARRAY_SIZE(palmtx_partitions)
+ }
+};
+
+static struct resource palmtx_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device palmtx_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &palmtx_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = palmtx_flash_data,
+ },
+};
+
+static void __init palmtx_nor_init(void)
+{
+ platform_device_register(&palmtx_flash);
+}
+#else
+static inline void palmtx_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int palmtx_matrix_keys[] = {
+ KEY(0, 0, KEY_POWER),
+ KEY(0, 1, KEY_F1),
+ KEY(0, 2, KEY_ENTER),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_F3),
+ KEY(1, 2, KEY_F4),
+
+ KEY(2, 0, KEY_UP),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_RIGHT),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct matrix_keymap_data palmtx_matrix_keymap_data = {
+ .keymap = palmtx_matrix_keys,
+ .keymap_size = ARRAY_SIZE(palmtx_matrix_keys),
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_keymap_data = &palmtx_matrix_keymap_data,
+
+ .debounce_interval = 30,
+};
+
+static void __init palmtx_kpc_init(void)
+{
+ pxa_set_keypad_info(&palmtx_keypad_platform_data);
+}
+#else
+static inline void palmtx_kpc_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+ .buttons = palmtx_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_pxa_keys_data,
+ },
+};
+
+static void __init palmtx_keys_init(void)
+{
+ platform_device_register(&palmtx_pxa_keys);
+}
+#else
+static inline void palmtx_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * NAND Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd_to_nand(mtd);
+ char __iomem *nandaddr = this->IO_ADDR_W;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, PALMTX_NAND_CLE_VIRT);
+ else if (ctrl & NAND_ALE)
+ writeb(cmd, PALMTX_NAND_ALE_VIRT);
+ else
+ writeb(cmd, nandaddr);
+}
+
+static struct mtd_partition palmtx_partition_info[] = {
+ [0] = {
+ .name = "palmtx-0",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+struct platform_nand_data palmtx_nand_platdata = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(palmtx_partition_info),
+ .partitions = palmtx_partition_info,
+ .chip_delay = 20,
+ },
+ .ctrl = {
+ .cmd_ctrl = palmtx_nand_cmd_ctl,
+ },
+};
+
+static struct resource palmtx_nand_resource[] = {
+ [0] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device palmtx_nand = {
+ .name = "gen_nand",
+ .num_resources = ARRAY_SIZE(palmtx_nand_resource),
+ .resource = palmtx_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_nand_platdata,
+ }
+};
+
+static void __init palmtx_nand_init(void)
+{
+ platform_device_register(&palmtx_nand);
+}
+#else
+static inline void palmtx_nand_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+ .virtual = (unsigned long)PALMTX_PCMCIA_VIRT,
+ .pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+ .length = PALMTX_PCMCIA_SIZE,
+ .type = MT_DEVICE,
+}, {
+ .virtual = (unsigned long)PALMTX_NAND_ALE_VIRT,
+ .pfn = __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+}, {
+ .virtual = (unsigned long)PALMTX_NAND_CLE_VIRT,
+ .pfn = __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+}
+};
+
+static void __init palmtx_map_io(void)
+{
+ pxa27x_map_io();
+ iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ palm27x_mmc_init(GPIO_NR_PALMTX_SD_DETECT_N, GPIO_NR_PALMTX_SD_READONLY,
+ GPIO_NR_PALMTX_SD_POWER, 0);
+ palm27x_pm_init(PALMTX_STR_BASE);
+ palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+ palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
+ GPIO_NR_PALMTX_USB_PULLUP, 1);
+ palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
+ palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
+ GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
+ palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
+ palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
+ palm27x_pmic_init();
+ palmtx_kpc_init();
+ palmtx_keys_init();
+ palmtx_nor_init();
+ palmtx_nand_init();
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+ .atag_offset = 0x100,
+ .map_io = palmtx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = palmtx_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
new file mode 100644
index 0000000..4d475f6
--- /dev/null
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -0,0 +1,424 @@
+/*
+ * Hardware definitions for Palm Zire72
+ *
+ * Authors:
+ * Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
+ * Sergey Lapin <slapin@ossfans.org>
+ * Alex Osborne <bobofdoom@gmail.com>
+ * Jan Herman <2hp@seznam.cz>
+ *
+ * Rewrite for mainline:
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx.h>
+#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/platform_data/i2c-gpio.h>
+#include <linux/gpio/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/suspend.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "pxa27x.h"
+#include <mach/audio.h>
+#include "palmz72.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include "udc.h"
+#include <linux/platform_data/asoc-palm27x.h>
+#include "palm27x.h"
+
+#include "pm.h"
+#include <linux/platform_data/media/camera-pxa.h>
+
+#include <media/soc_camera.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmz72_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO115_GPIO, /* SD RO */
+ GPIO98_GPIO, /* SD power */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO113_AC97_nRESET,
+
+ /* IrDA */
+ GPIO49_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO15_GPIO, /* usb detect */
+ GPIO95_GPIO, /* usb pullup */
+
+ /* Matrix keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ GPIO20_GPIO, /* bl power */
+ GPIO21_GPIO, /* LCD border switch */
+ GPIO22_GPIO, /* LCD border color */
+ GPIO96_GPIO, /* lcd power */
+
+ /* PXA Camera */
+ GPIO81_CIF_DD_0,
+ GPIO48_CIF_DD_5,
+ GPIO50_CIF_DD_3,
+ GPIO51_CIF_DD_2,
+ GPIO52_CIF_DD_4,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO55_CIF_DD_1,
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+ GPIO93_CIF_DD_6,
+ GPIO108_CIF_DD_7,
+
+ GPIO56_GPIO, /* OV9640 Powerdown */
+ GPIO57_GPIO, /* OV9640 Reset */
+ GPIO91_GPIO, /* OV9640 Power */
+
+ /* I2C */
+ GPIO117_GPIO, /* I2C_SCL */
+ GPIO118_GPIO, /* I2C_SDA */
+
+ /* Misc. */
+ GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */
+ GPIO88_GPIO, /* green led */
+ GPIO27_GPIO, /* WM9712 IRQ */
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int palmz72_matrix_keys[] = {
+ KEY(0, 0, KEY_POWER),
+ KEY(0, 1, KEY_F1),
+ KEY(0, 2, KEY_ENTER),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_F3),
+ KEY(1, 2, KEY_F4),
+
+ KEY(2, 0, KEY_UP),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_RIGHT),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct matrix_keymap_data almz72_matrix_keymap_data = {
+ .keymap = palmz72_matrix_keys,
+ .keymap_size = ARRAY_SIZE(palmz72_matrix_keys),
+};
+
+static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_keymap_data = &almz72_matrix_keymap_data,
+
+ .debounce_interval = 30,
+};
+
+static void __init palmz72_kpc_init(void)
+{
+ pxa_set_keypad_info(&palmz72_keypad_platform_data);
+}
+#else
+static inline void palmz72_kpc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "palmz72:green:led",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMZ72_LED_GREEN,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmz72_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ }
+};
+
+static void __init palmz72_leds_init(void)
+{
+ platform_device_register(&palmz72_leds);
+}
+#else
+static inline void palmz72_leds_init(void) {}
+#endif
+
+#ifdef CONFIG_PM
+
+/* We have some black magic here
+ * PalmOS ROM on recover expects special struct physical address
+ * to be transferred via PSPR. Using this struct PalmOS restores
+ * its state after sleep. As for Linux, we need to setup it the
+ * same way. More than that, PalmOS ROM changes some values in memory.
+ * For now only one location is found, which needs special treatment.
+ * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
+ * for reading backtraces for me :)
+ */
+
+#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
+
+static struct palmz72_resume_info palmz72_resume_info = {
+ .magic0 = 0xb4e6,
+ .magic1 = 1,
+
+ /* reset state, MMU off etc */
+ .arm_control = 0,
+ .aux_control = 0,
+ .ttb = 0,
+ .domain_access = 0,
+ .process_id = 0,
+};
+
+static unsigned long store_ptr;
+
+/* syscore_ops for Palm Zire 72 PM */
+
+static int palmz72_pm_suspend(void)
+{
+ /* setup the resume_info struct for the original bootloader */
+ palmz72_resume_info.resume_addr = (u32) cpu_resume;
+
+ /* Storing memory touched by ROM */
+ store_ptr = *PALMZ72_SAVE_DWORD;
+
+ /* Setting PSPR to a proper value */
+ PSPR = __pa_symbol(&palmz72_resume_info);
+
+ return 0;
+}
+
+static void palmz72_pm_resume(void)
+{
+ *PALMZ72_SAVE_DWORD = store_ptr;
+}
+
+static struct syscore_ops palmz72_pm_syscore_ops = {
+ .suspend = palmz72_pm_suspend,
+ .resume = palmz72_pm_resume,
+};
+
+static int __init palmz72_pm_init(void)
+{
+ if (machine_is_palmz72()) {
+ register_syscore_ops(&palmz72_pm_syscore_ops);
+ return 0;
+ }
+ return -ENODEV;
+}
+
+device_initcall(palmz72_pm_init);
+#endif
+
+/******************************************************************************
+ * SoC Camera
+ ******************************************************************************/
+#if defined(CONFIG_SOC_CAMERA_OV9640) || \
+ defined(CONFIG_SOC_CAMERA_OV9640_MODULE)
+static struct pxacamera_platform_data palmz72_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 2600,
+};
+
+/* Board I2C devices. */
+static struct i2c_board_info palmz72_i2c_device[] = {
+ {
+ I2C_BOARD_INFO("ov9640", 0x30),
+ }
+};
+
+static int palmz72_camera_power(struct device *dev, int power)
+{
+ gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power);
+ mdelay(50);
+ return 0;
+}
+
+static int palmz72_camera_reset(struct device *dev)
+{
+ gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1);
+ mdelay(50);
+ gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0);
+ mdelay(50);
+ return 0;
+}
+
+static struct soc_camera_link palmz72_iclink = {
+ .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */
+ .board_info = &palmz72_i2c_device[0],
+ .i2c_adapter_id = 0,
+ .module_name = "ov96xx",
+ .power = &palmz72_camera_power,
+ .reset = &palmz72_camera_reset,
+ .flags = SOCAM_DATAWIDTH_8,
+};
+
+static struct gpiod_lookup_table palmz72_i2c_gpiod_table = {
+ .dev_id = "i2c-gpio.0",
+ .table = {
+ GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0,
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ GPIO_LOOKUP_IDX("gpio-pxa", 117, NULL, 1,
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ },
+};
+
+static struct i2c_gpio_platform_data palmz72_i2c_bus_data = {
+ .udelay = 10,
+ .timeout = 100,
+};
+
+static struct platform_device palmz72_i2c_bus_device = {
+ .name = "i2c-gpio",
+ .id = 0, /* we use this as a replacement for i2c-pxa */
+ .dev = {
+ .platform_data = &palmz72_i2c_bus_data,
+ }
+};
+
+static struct platform_device palmz72_camera = {
+ .name = "soc-camera-pdrv",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmz72_iclink,
+ },
+};
+
+/* Here we request the camera GPIOs and configure them. We power up the camera
+ * module, deassert the reset pin, but put it into powerdown (low to no power
+ * consumption) mode. This allows us to later bring the module up fast. */
+static struct gpio palmz72_camera_gpios[] = {
+ { GPIO_NR_PALMZ72_CAM_POWER, GPIOF_INIT_HIGH,"Camera DVDD" },
+ { GPIO_NR_PALMZ72_CAM_RESET, GPIOF_INIT_LOW, "Camera RESET" },
+ { GPIO_NR_PALMZ72_CAM_PWDN, GPIOF_INIT_LOW, "Camera PWDN" },
+};
+
+static inline void __init palmz72_cam_gpio_init(void)
+{
+ int ret;
+
+ ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+ if (!ret)
+ gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+ else
+ printk(KERN_ERR "Camera GPIO init failed!\n");
+
+ return;
+}
+
+static void __init palmz72_camera_init(void)
+{
+ palmz72_cam_gpio_init();
+ pxa_set_camera_info(&palmz72_pxacamera_platform_data);
+ gpiod_add_lookup_table(&palmz72_i2c_gpiod_table);
+ platform_device_register(&palmz72_i2c_bus_device);
+ platform_device_register(&palmz72_camera);
+}
+#else
+static inline void palmz72_camera_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init palmz72_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ palm27x_mmc_init(GPIO_NR_PALMZ72_SD_DETECT_N, GPIO_NR_PALMZ72_SD_RO,
+ GPIO_NR_PALMZ72_SD_POWER_N, 1);
+ palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
+ palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
+ GPIO_NR_PALMZ72_USB_PULLUP, 0);
+ palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
+ palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
+ -1, 113);
+ palm27x_pwm_init(-1, -1);
+ palm27x_power_init(-1, -1);
+ palm27x_pmic_init();
+ palmz72_kpc_init();
+ palmz72_leds_init();
+ palmz72_camera_init();
+}
+
+MACHINE_START(PALMZ72, "Palm Zire72")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = palmz72_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.h b/arch/arm/mach-pxa/palmz72.h
new file mode 100644
index 0000000..0d4700a
--- /dev/null
+++ b/arch/arm/mach-pxa/palmz72.h
@@ -0,0 +1,84 @@
+/*
+ * GPIOs and interrupts for Palm Zire72 Handheld Computer
+ *
+ * Authors: Alex Osborne <bobofdoom@gmail.com>
+ * Jan Herman <2hp@seznam.cz>
+ * Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMZ72_H_
+#define _INCLUDE_PALMZ72_H_
+
+/* Power and control */
+#define GPIO_NR_PALMZ72_GPIO_RESET 1
+#define GPIO_NR_PALMZ72_POWER_DETECT 0
+
+/* SD/MMC */
+#define GPIO_NR_PALMZ72_SD_DETECT_N 14
+#define GPIO_NR_PALMZ72_SD_POWER_N 98
+#define GPIO_NR_PALMZ72_SD_RO 115
+
+/* Touchscreen */
+#define GPIO_NR_PALMZ72_WM9712_IRQ 27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMZ72_IR_DISABLE 49
+
+/* USB */
+#define GPIO_NR_PALMZ72_USB_DETECT_N 15
+#define GPIO_NR_PALMZ72_USB_PULLUP 95
+
+/* LCD/Backlight */
+#define GPIO_NR_PALMZ72_BL_POWER 20
+#define GPIO_NR_PALMZ72_LCD_POWER 96
+
+/* LED */
+#define GPIO_NR_PALMZ72_LED_GREEN 88
+
+/* Bluetooth */
+#define GPIO_NR_PALMZ72_BT_POWER 17
+#define GPIO_NR_PALMZ72_BT_RESET 83
+
+/* Camera */
+#define GPIO_NR_PALMZ72_CAM_PWDN 56
+#define GPIO_NR_PALMZ72_CAM_RESET 57
+#define GPIO_NR_PALMZ72_CAM_POWER 91
+
+/** Initial values **/
+
+/* Battery */
+#define PALMZ72_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMZ72_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMZ72_BAT_MAX_CURRENT 0 /* unknown */
+#define PALMZ72_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMZ72_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMZ72_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMZ72_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+/* Backlight */
+#define PALMZ72_MAX_INTENSITY 0xFE
+#define PALMZ72_DEFAULT_INTENSITY 0x7E
+#define PALMZ72_LIMIT_MASK 0x7F
+#define PALMZ72_PRESCALER 0x3F
+#define PALMZ72_PERIOD_NS 3500
+
+#ifdef CONFIG_PM
+struct palmz72_resume_info {
+ u32 magic0; /* 0x0 */
+ u32 magic1; /* 0x4 */
+ u32 resume_addr; /* 0x8 */
+ u32 pad[11]; /* 0xc..0x37 */
+ u32 arm_control; /* 0x38 */
+ u32 aux_control; /* 0x3c */
+ u32 ttb; /* 0x40 */
+ u32 domain_access; /* 0x44 */
+ u32 process_id; /* 0x48 */
+};
+#endif
+#endif
+
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
new file mode 100644
index 0000000..ccca9f7
--- /dev/null
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -0,0 +1,269 @@
+/*
+ * linux/arch/arm/mach-pxa/pcm027.c
+ * Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
+ *
+ * Refer
+ * http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
+ * for additional hardware info
+ *
+ * Author: Juergen Kilb
+ * Created: April 05, 2005
+ * Copyright: Phytec Messtechnik GmbH
+ * e-Mail: armlinux@phytec.de
+ *
+ * based on Intel Mainstone Board
+ *
+ * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "pxa27x.h"
+#include "pcm027.h"
+#include "generic.h"
+
+/*
+ * ABSTRACT:
+ *
+ * The PXA270 processor comes with a bunch of hardware on its silicon.
+ * Not all of this hardware can be used at the same time and not all
+ * is routed to module's connectors. Also it depends on the baseboard, what
+ * kind of hardware can be used in which way.
+ * -> So this file supports the main devices on the CPU card only!
+ * Refer pcm990-baseboard.c how to extend this features to get a full
+ * blown system with many common interfaces.
+ *
+ * The PCM-027 supports the following interfaces through its connectors and
+ * will be used in pcm990-baseboard.c:
+ *
+ * - LCD support
+ * - MMC support
+ * - IDE/CF card
+ * - FFUART
+ * - BTUART
+ * - IRUART
+ * - AC97
+ * - SSP
+ * - SSP3
+ *
+ * Claimed GPIOs:
+ * GPIO0 -> IRQ input from RTC
+ * GPIO2 -> SYS_ENA*)
+ * GPIO3 -> PWR_SCL
+ * GPIO4 -> PWR_SDA
+ * GPIO5 -> PowerCap0*)
+ * GPIO6 -> PowerCap1*)
+ * GPIO7 -> PowerCap2*)
+ * GPIO8 -> PowerCap3*)
+ * GPIO15 -> /CS1
+ * GPIO20 -> /CS2
+ * GPIO21 -> /CS3
+ * GPIO33 -> /CS5 network controller select
+ * GPIO52 -> IRQ from network controller
+ * GPIO78 -> /CS2
+ * GPIO80 -> /CS4
+ * GPIO90 -> LED0
+ * GPIO91 -> LED1
+ * GPIO114 -> IRQ from CAN controller
+ * GPIO117 -> SCL
+ * GPIO118 -> SDA
+ *
+ * *) CPU internal use only
+ */
+
+static unsigned long pcm027_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO20_nSDCS_2,
+ GPIO21_nSDCS_3,
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5, /* Ethernet */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* GPIO */
+ GPIO52_GPIO, /* IRQ from network controller */
+#ifdef CONFIG_LEDS_GPIO
+ GPIO90_GPIO, /* PCM027_LED_CPU */
+ GPIO91_GPIO, /* PCM027_LED_HEART_BEAT */
+#endif
+ GPIO114_GPIO, /* IRQ from CAN controller */
+};
+
+/*
+ * SMC91x network controller specific stuff
+ */
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = PCM027_ETH_PHYS + 0x300,
+ .end = PCM027_ETH_PHYS + PCM027_ETH_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PCM027_ETH_IRQ,
+ .end = PCM027_ETH_IRQ,
+ /* note: smc91x's driver doesn't use the trigger bits yet */
+ .flags = IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+/*
+ * SPI host and devices
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+ .num_chipselect = 1,
+};
+
+static struct max7301_platform_data max7301_info = {
+ .base = -1,
+};
+
+/* bus_num must match id in pxa2xx_set_spi_info() call */
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "max7301",
+ .platform_data = &max7301_info,
+ .max_speed_hz = 13000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+/*
+ * NOR flash
+ */
+static struct physmap_flash_data pcm027_flash_data = {
+ .width = 4,
+};
+
+static struct resource pcm027_flash_resource = {
+ .start = PCM027_FLASH_PHYS,
+ .end = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm027_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm027_flash_data,
+ },
+ .resource = &pcm027_flash_resource,
+ .num_resources = 1,
+};
+
+#ifdef CONFIG_LEDS_GPIO
+
+static struct gpio_led pcm027_led[] = {
+ {
+ .name = "led0:red", /* FIXME */
+ .gpio = PCM027_LED_CPU
+ },
+ {
+ .name = "led1:green", /* FIXME */
+ .gpio = PCM027_LED_HEARD_BEAT
+ },
+};
+
+static struct gpio_led_platform_data pcm027_led_data = {
+ .num_leds = ARRAY_SIZE(pcm027_led),
+ .leds = pcm027_led
+};
+
+static struct platform_device pcm027_led_dev = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm027_led_data,
+ },
+};
+
+#endif /* CONFIG_LEDS_GPIO */
+
+/*
+ * declare the available device resources on this board
+ */
+static struct platform_device *devices[] __initdata = {
+ &smc91x_device,
+ &pcm027_flash,
+#ifdef CONFIG_LEDS_GPIO
+ &pcm027_led_dev
+#endif
+};
+
+/*
+ * pcm027_init - breath some life into the board
+ */
+static void __init pcm027_init(void)
+{
+ /* system bus arbiter setting
+ * - Core_Park
+ * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+ */
+ ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+ pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ /* at last call the baseboard to initialize itself */
+#ifdef CONFIG_MACH_PCM990_BASEBOARD
+ pcm990_baseboard_init();
+#endif
+
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+}
+
+static void __init pcm027_map_io(void)
+{
+ pxa27x_map_io();
+
+ /* initialize sleep mode regs (wake-up sources, etc) */
+ PGSR0 = 0x01308000;
+ PGSR1 = 0x00CF0002;
+ PGSR2 = 0x0E294000;
+ PGSR3 = 0x0000C000;
+ PWER = 0x40000000 | PWER_GPIO0 | PWER_GPIO1;
+ PRER = 0x00000000;
+ PFER = 0x00000003;
+}
+
+MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
+ /* Maintainer: Pengutronix */
+ .atag_offset = 0x100,
+ .map_io = pcm027_map_io,
+ .nr_irqs = PCM027_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = pcm027_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.h b/arch/arm/mach-pxa/pcm027.h
new file mode 100644
index 0000000..047cdf2
--- /dev/null
+++ b/arch/arm/mach-pxa/pcm027.h
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm027.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Definitions of CPU card resources only
+ */
+
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ PCM027_IRQ(3)
+
+#define PCM027_NR_IRQS (IRQ_BOARD_START + 32)
+
+/* I2C RTC */
+#define PCM027_RTC_IRQ_GPIO 0
+#define PCM027_RTC_IRQ PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+#define ADR_PCM027_RTC 0x51 /* I2C address */
+
+/* I2C EEPROM */
+#define ADR_PCM027_EEPROM 0x54 /* I2C address */
+
+/* Ethernet chip (SMSC91C111) */
+#define PCM027_ETH_IRQ_GPIO 52
+#define PCM027_ETH_IRQ PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+#define PCM027_ETH_PHYS PXA_CS5_PHYS
+#define PCM027_ETH_SIZE (1*1024*1024)
+
+/* CAN controller SJA1000 (unsupported yet) */
+#define PCM027_CAN_IRQ_GPIO 114
+#define PCM027_CAN_IRQ PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+#define PCM027_CAN_PHYS 0x22000000
+#define PCM027_CAN_SIZE 0x100
+
+/* SPI GPIO expander (unsupported yet) */
+#define PCM027_EGPIO_IRQ_GPIO 27
+#define PCM027_EGPIO_IRQ PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+#define PCM027_EGPIO_CS 24
+/*
+ * TODO: Switch this pin from dedicated usage to GPIO if
+ * more than the MAX7301 device is connected to this SPI bus
+ */
+#define PCM027_EGPIO_CS_MODE GPIO24_SFRM_MD
+
+/* Flash memory */
+#define PCM027_FLASH_PHYS 0x00000000
+#define PCM027_FLASH_SIZE 0x02000000
+
+/* onboard LEDs connected to GPIO */
+#define PCM027_LED_CPU 90
+#define PCM027_LED_HEARD_BEAT 91
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own basebaord init function and call it from
+ * inside pcm027_init(). This example here is for the developmen board.
+ * Refer pcm990-baseboard.c
+ */
+extern void pcm990_baseboard_init(void);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
new file mode 100644
index 0000000..973568d
--- /dev/null
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -0,0 +1,572 @@
+/*
+ * arch/arm/mach-pxa/pcm990-baseboard.c
+ * Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
+ *
+ * Refer
+ * http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html
+ * for additional hardware info
+ *
+ * Author: Juergen Kilb
+ * Created: April 05, 2005
+ * Copyright: Phytec Messtechnik GmbH
+ * e-Mail: armlinux@phytec.de
+ *
+ * based on Intel Mainstone Board
+ *
+ * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+
+#include <media/i2c/mt9v022.h>
+#include <media/soc_camera.h>
+
+#include <linux/platform_data/media/camera-pxa.h>
+#include <asm/mach/map.h>
+#include "pxa27x.h"
+#include <mach/audio.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include "pcm990_baseboard.h"
+#include <linux/platform_data/video-pxafb.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ /* USB */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ /* PWM0 */
+ GPIO16_PWM0_OUT,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+};
+
+static void __iomem *pcm990_cpld_base;
+
+static u8 pcm990_cpld_readb(unsigned int reg)
+{
+ return readb(pcm990_cpld_base + reg);
+}
+
+static void pcm990_cpld_writeb(u8 value, unsigned int reg)
+{
+ writeb(value, pcm990_cpld_base + reg);
+}
+
+/*
+ * pcm990_lcd_power - control power supply to the LCD
+ * @on: 0 = switch off, 1 = switch on
+ *
+ * Called by the pxafb driver
+ */
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+ if (on) {
+ /* enable LCD-Latches
+ * power on LCD
+ */
+ pcm990_cpld_writeb(PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON,
+ PCM990_CTRL_REG3);
+ } else {
+ /* disable LCD-Latches
+ * power off LCD
+ */
+ pcm990_cpld_writeb(0, PCM990_CTRL_REG3);
+ }
+}
+#endif
+
+#if defined(CONFIG_PCM990_DISPLAY_SHARP)
+static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
+ .pixclock = 28000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 20,
+ .left_margin = 103,
+ .right_margin = 47,
+ .vsync_len = 6,
+ .upper_margin = 28,
+ .lower_margin = 5,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+ .modes = &fb_info_sharp_lq084v1dg21,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_lcd_power = pcm990_lcd_power,
+};
+#elif defined(CONFIG_PCM990_DISPLAY_NEC)
+struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
+ .pixclock = 39720,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 32,
+ .left_margin = 16,
+ .right_margin = 48,
+ .vsync_len = 2,
+ .upper_margin = 12,
+ .lower_margin = 17,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+ .modes = &fb_info_nec_nl6448bc20_18d,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_lcd_power = pcm990_lcd_power,
+};
+#endif
+
+static struct pwm_lookup pcm990_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data pcm990_backlight_data = {
+ .max_brightness = 1023,
+ .dft_brightness = 1023,
+ .enable_gpio = -1,
+};
+
+static struct platform_device pcm990_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &pcm990_backlight_data,
+ },
+};
+
+/*
+ * The PCM-990 development baseboard uses PCM-027's hardware in the
+ * following way:
+ *
+ * - LCD support is in use
+ * - GPIO16 is output for back light on/off with PWM
+ * - GPIO58 ... GPIO73 are outputs for display data
+ * - GPIO74 is output output for LCDFCLK
+ * - GPIO75 is output for LCDLCLK
+ * - GPIO76 is output for LCDPCLK
+ * - GPIO77 is output for LCDBIAS
+ * - MMC support is in use
+ * - GPIO32 is output for MMCCLK
+ * - GPIO92 is MMDAT0
+ * - GPIO109 is MMDAT1
+ * - GPIO110 is MMCS0
+ * - GPIO111 is MMCS1
+ * - GPIO112 is MMCMD
+ * - IDE/CF card is in use
+ * - GPIO48 is output /POE
+ * - GPIO49 is output /PWE
+ * - GPIO50 is output /PIOR
+ * - GPIO51 is output /PIOW
+ * - GPIO54 is output /PCE2
+ * - GPIO55 is output /PREG
+ * - GPIO56 is input /PWAIT
+ * - GPIO57 is output /PIOS16
+ * - GPIO79 is output PSKTSEL
+ * - GPIO85 is output /PCE1
+ * - FFUART is in use
+ * - GPIO34 is input FFRXD
+ * - GPIO35 is input FFCTS
+ * - GPIO36 is input FFDCD
+ * - GPIO37 is input FFDSR
+ * - GPIO38 is input FFRI
+ * - GPIO39 is output FFTXD
+ * - GPIO40 is output FFDTR
+ * - GPIO41 is output FFRTS
+ * - BTUART is in use
+ * - GPIO42 is input BTRXD
+ * - GPIO43 is output BTTXD
+ * - GPIO44 is input BTCTS
+ * - GPIO45 is output BTRTS
+ * - IRUART is in use
+ * - GPIO46 is input STDRXD
+ * - GPIO47 is output STDTXD
+ * - AC97 is in use*)
+ * - GPIO28 is input AC97CLK
+ * - GPIO29 is input AC97DatIn
+ * - GPIO30 is output AC97DatO
+ * - GPIO31 is output AC97SYNC
+ * - GPIO113 is output AC97_RESET
+ * - SSP is in use
+ * - GPIO23 is output SSPSCLK
+ * - GPIO24 is output chip select to Max7301
+ * - GPIO25 is output SSPTXD
+ * - GPIO26 is input SSPRXD
+ * - GPIO27 is input for Max7301 IRQ
+ * - GPIO53 is input SSPSYSCLK
+ * - SSP3 is in use
+ * - GPIO81 is output SSPTXD3
+ * - GPIO82 is input SSPRXD3
+ * - GPIO83 is output SSPSFRM
+ * - GPIO84 is output SSPCLK3
+ *
+ * Otherwise claimed GPIOs:
+ * GPIO1 -> IRQ from user switch
+ * GPIO9 -> IRQ from power management
+ * GPIO10 -> IRQ from WML9712 AC97 controller
+ * GPIO11 -> IRQ from IDE controller
+ * GPIO12 -> IRQ from CF controller
+ * GPIO13 -> IRQ from CF controller
+ * GPIO14 -> GPIO free
+ * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path)
+ * GPIO19 -> GPIO free
+ * GPIO20 -> /SDCS2
+ * GPIO21 -> /CS3 PC card socket select
+ * GPIO33 -> /CS5 network controller select
+ * GPIO78 -> /CS2 (16 bit wide data path)
+ * GPIO80 -> /CS4 (16 bit wide data path)
+ * GPIO86 -> GPIO free
+ * GPIO87 -> GPIO free
+ * GPIO90 -> LED0 on CPU module
+ * GPIO91 -> LED1 on CPI module
+ * GPIO117 -> SCL
+ * GPIO118 -> SDA
+ */
+
+static unsigned long pcm990_irq_enabled;
+
+static void pcm990_mask_ack_irq(struct irq_data *d)
+{
+ int pcm990_irq = (d->irq - PCM027_IRQ(0));
+
+ pcm990_irq_enabled &= ~(1 << pcm990_irq);
+
+ pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
+}
+
+static void pcm990_unmask_irq(struct irq_data *d)
+{
+ int pcm990_irq = (d->irq - PCM027_IRQ(0));
+ u8 val;
+
+ /* the irq can be acknowledged only if deasserted, so it's done here */
+
+ pcm990_irq_enabled |= (1 << pcm990_irq);
+
+ val = pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+ val |= 1 << pcm990_irq;
+ pcm990_cpld_writeb(val, PCM990_CTRL_INTSETCLR);
+
+ pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
+}
+
+static struct irq_chip pcm990_irq_chip = {
+ .irq_mask_ack = pcm990_mask_ack_irq,
+ .irq_unmask = pcm990_unmask_irq,
+};
+
+static void pcm990_irq_handler(struct irq_desc *desc)
+{
+ unsigned int irq;
+ unsigned long pending;
+
+ pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+ pending &= pcm990_irq_enabled;
+
+ do {
+ /* clear our parent IRQ */
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+ if (likely(pending)) {
+ irq = PCM027_IRQ(0) + __ffs(pending);
+ generic_handle_irq(irq);
+ }
+ pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+ pending &= pcm990_irq_enabled;
+ } while (pending);
+}
+
+static void __init pcm990_init_irq(void)
+{
+ int irq;
+
+ /* setup extra PCM990 irqs */
+ for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
+ irq_set_chip_and_handler(irq, &pcm990_irq_chip,
+ handle_level_irq);
+ irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+ }
+
+ /* disable all Interrupts */
+ pcm990_cpld_writeb(0x0, PCM990_CTRL_INTMSKENA);
+ pcm990_cpld_writeb(0xff, PCM990_CTRL_INTSETCLR);
+
+ irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
+ irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
+}
+
+static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
+ void *data)
+{
+ int err;
+
+ err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, 0,
+ "MMC card detect", data);
+ if (err)
+ printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC "
+ "card detect IRQ\n");
+
+ return err;
+}
+
+static int pcm990_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ u8 val;
+
+ val = pcm990_cpld_readb(PCM990_CTRL_REG5);
+
+ if ((1 << vdd) & p_d->ocr_mask)
+ val |= PCM990_CTRL_MMC2PWR;
+ else
+ val &= ~PCM990_CTRL_MMC2PWR;
+
+ pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
+ return 0;
+}
+
+static void pcm990_mci_exit(struct device *dev, void *data)
+{
+ free_irq(PCM027_MMCDET_IRQ, data);
+}
+
+#define MSECS_PER_JIFFY (1000/HZ)
+
+static struct pxamci_platform_data pcm990_mci_platform_data = {
+ .detect_delay_ms = 250,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = pcm990_mci_init,
+ .setpower = pcm990_mci_setpower,
+ .exit = pcm990_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+static struct pxaohci_platform_data pcm990_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .power_on_delay = 10,
+};
+
+/*
+ * PXA27x Camera specific stuff
+ */
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+ /* CIF */
+ GPIO98_CIF_DD_0,
+ GPIO105_CIF_DD_1,
+ GPIO104_CIF_DD_2,
+ GPIO103_CIF_DD_3,
+ GPIO95_CIF_DD_4,
+ GPIO94_CIF_DD_5,
+ GPIO93_CIF_DD_6,
+ GPIO108_CIF_DD_7,
+ GPIO107_CIF_DD_8,
+ GPIO106_CIF_DD_9,
+ GPIO42_CIF_MCLK,
+ GPIO45_CIF_PCLK,
+ GPIO43_CIF_FV,
+ GPIO44_CIF_LV,
+};
+
+/*
+ * CICR4: PCLK_EN: Pixel clock is supplied by the sensor
+ * MCLK_EN: Master clock is generated by PXA
+ * PCP: Data sampled on the falling edge of pixel clock
+ */
+struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
+ .mclk_10khz = 1000,
+};
+
+#include <linux/platform_data/pca953x.h>
+
+static struct pca953x_platform_data pca9536_data = {
+ .gpio_base = PXA_NR_BUILTIN_GPIO,
+};
+
+static int gpio_bus_switch = -EINVAL;
+
+static int pcm990_camera_set_bus_param(struct soc_camera_link *link,
+ unsigned long flags)
+{
+ if (gpio_bus_switch < 0) {
+ if (flags == SOCAM_DATAWIDTH_10)
+ return 0;
+ else
+ return -EINVAL;
+ }
+
+ if (flags & SOCAM_DATAWIDTH_8)
+ gpio_set_value_cansleep(gpio_bus_switch, 1);
+ else
+ gpio_set_value_cansleep(gpio_bus_switch, 0);
+
+ return 0;
+}
+
+static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link)
+{
+ int ret;
+
+ if (gpio_bus_switch < 0) {
+ ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera");
+ if (!ret) {
+ gpio_bus_switch = PXA_NR_BUILTIN_GPIO;
+ gpio_direction_output(gpio_bus_switch, 0);
+ }
+ }
+
+ if (gpio_bus_switch >= 0)
+ return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10;
+ else
+ return SOCAM_DATAWIDTH_10;
+}
+
+static void pcm990_camera_free_bus(struct soc_camera_link *link)
+{
+ if (gpio_bus_switch < 0)
+ return;
+
+ gpio_free(gpio_bus_switch);
+ gpio_bus_switch = -EINVAL;
+}
+
+/* Board I2C devices. */
+static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
+ {
+ /* Must initialize before the camera(s) */
+ I2C_BOARD_INFO("pca9536", 0x41),
+ .platform_data = &pca9536_data,
+ },
+};
+
+static struct mt9v022_platform_data mt9v022_pdata = {
+ .y_skip_top = 1,
+};
+
+static struct i2c_board_info pcm990_camera_i2c[] = {
+ {
+ I2C_BOARD_INFO("mt9v022", 0x48),
+ }, {
+ I2C_BOARD_INFO("mt9m001", 0x5d),
+ },
+};
+
+static struct soc_camera_link iclink[] = {
+ {
+ .bus_id = 0, /* Must match with the camera ID */
+ .board_info = &pcm990_camera_i2c[0],
+ .priv = &mt9v022_pdata,
+ .i2c_adapter_id = 0,
+ .query_bus_param = pcm990_camera_query_bus_param,
+ .set_bus_param = pcm990_camera_set_bus_param,
+ .free_bus = pcm990_camera_free_bus,
+ }, {
+ .bus_id = 0, /* Must match with the camera ID */
+ .board_info = &pcm990_camera_i2c[1],
+ .i2c_adapter_id = 0,
+ .query_bus_param = pcm990_camera_query_bus_param,
+ .set_bus_param = pcm990_camera_set_bus_param,
+ .free_bus = pcm990_camera_free_bus,
+ },
+};
+
+static struct platform_device pcm990_camera[] = {
+ {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink[0],
+ },
+ }, {
+ .name = "soc-camera-pdrv",
+ .id = 1,
+ .dev = {
+ .platform_data = &iclink[1],
+ },
+ },
+};
+#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
+
+/*
+ * system init for baseboard usage. Will be called by pcm027 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init pcm990_baseboard_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
+ pcm990_cpld_base = ioremap(PCM990_CTRL_PHYS, PCM990_CTRL_SIZE);
+ if (!pcm990_cpld_base) {
+ pr_err("pcm990: failed to ioremap cpld\n");
+ return;
+ }
+
+ /* register CPLD's IRQ controller */
+ pcm990_init_irq();
+
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+ pxa_set_fb_info(NULL, &pcm990_fbinfo);
+#endif
+ pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup));
+ platform_device_register(&pcm990_backlight_device);
+
+ /* MMC */
+ pxa_set_mci_info(&pcm990_mci_platform_data);
+
+ /* USB host */
+ pxa_set_ohci_info(&pcm990_ohci_platform_data);
+
+ pxa_set_i2c_info(NULL);
+ pxa_set_ac97_info(NULL);
+
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
+ pxa_set_camera_info(&pcm990_pxacamera_platform_data);
+
+ i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
+
+ platform_device_register(&pcm990_camera[0]);
+ platform_device_register(&pcm990_camera[1]);
+#endif
+
+ printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
+}
diff --git a/arch/arm/mach-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h
new file mode 100644
index 0000000..79d35ad
--- /dev/null
+++ b/arch/arm/mach-pxa/pcm990_baseboard.h
@@ -0,0 +1,212 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include "pcm027.h"
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+
+/*
+ * definitions relevant only when the PCM-990
+ * development base board is in use
+ */
+
+/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
+#define PCM990_CTRL_INT_IRQ_GPIO 9
+#define PCM990_CTRL_INT_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */
+#define PCM990_CTRL_SIZE (1*1024*1024)
+
+#define PCM990_CTRL_PWR_IRQ_GPIO 14
+#define PCM990_CTRL_PWR_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+
+/* visible CPLD (U7) registers */
+#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */
+#define PCM990_CTRL_SYSRES 0x0001 /* System RESET REGISTER */
+#define PCM990_CTRL_RESOUT 0x0002 /* RESETOUT Enable REGISTER */
+#define PCM990_CTRL_RESGPIO 0x0004 /* RESETGPIO Enable REGISTER */
+
+#define PCM990_CTRL_REG1 0x0002 /* Power REGISTER */
+#define PCM990_CTRL_5VOFF 0x0001 /* Disable 5V Regulators */
+#define PCM990_CTRL_CANPWR 0x0004 /* Enable CANPWR ADUM */
+#define PCM990_CTRL_PM_5V 0x0008 /* Read 5V OK */
+
+#define PCM990_CTRL_REG2 0x0004 /* LED REGISTER */
+#define PCM990_CTRL_LEDPWR 0x0001 /* POWER LED enable */
+#define PCM990_CTRL_LEDBAS 0x0002 /* BASIS LED enable */
+#define PCM990_CTRL_LEDUSR 0x0004 /* USER LED enable */
+
+#define PCM990_CTRL_REG3 0x0006 /* LCD CTRL REGISTER 3 */
+#define PCM990_CTRL_LCDPWR 0x0001 /* RW LCD Power on */
+#define PCM990_CTRL_LCDON 0x0002 /* RW LCD Latch on */
+#define PCM990_CTRL_LCDPOS1 0x0004 /* RW POS 1 */
+#define PCM990_CTRL_LCDPOS2 0x0008 /* RW POS 2 */
+
+#define PCM990_CTRL_REG4 0x0008 /* MMC1 CTRL REGISTER 4 */
+#define PCM990_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */
+
+#define PCM990_CTRL_REG5 0x000A /* MMC2 CTRL REGISTER 5 */
+#define PCM990_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */
+#define PCM990_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */
+#define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */
+#define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */
+
+#define PCM990_CTRL_INTSETCLR 0x000C /* Interrupt Clear REGISTER */
+#define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */
+#define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */
+#define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */
+#define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */
+
+#define PCM990_CTRL_INTMSKENA 0x000E /* Interrupt Enable REGISTER */
+#define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */
+#define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */
+#define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */
+#define PCM990_CTRL_ENAINT3 0x0008 /* Enable Int PM_5V off */
+
+#define PCM990_CTRL_REG8 0x0014 /* Uart REGISTER */
+#define PCM990_CTRL_FFSD 0x0001 /* BT Uart Enable */
+#define PCM990_CTRL_BTSD 0x0002 /* FF Uart Enable */
+#define PCM990_CTRL_FFRI 0x0004 /* FF Uart RI detect */
+#define PCM990_CTRL_BTRX 0x0008 /* BT Uart Rx detect */
+
+#define PCM990_CTRL_REG9 0x0010 /* AC97 Flash REGISTER */
+#define PCM990_CTRL_FLWP 0x0001 /* pC Flash Write Protect */
+#define PCM990_CTRL_FLDIS 0x0002 /* pC Flash Disable */
+#define PCM990_CTRL_AC97ENA 0x0004 /* Enable AC97 Expansion */
+
+#define PCM990_CTRL_REG10 0x0012 /* GPS-REGISTER */
+#define PCM990_CTRL_GPSPWR 0x0004 /* GPS-Modul Power on */
+#define PCM990_CTRL_GPSENA 0x0008 /* GPS-Modul Enable */
+
+#define PCM990_CTRL_REG11 0x0014 /* Accu REGISTER */
+#define PCM990_CTRL_ACENA 0x0001 /* Charge Enable */
+#define PCM990_CTRL_ACSEL 0x0002 /* Charge Akku -> DC Enable */
+#define PCM990_CTRL_ACPRES 0x0004 /* DC Present */
+#define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */
+
+/*
+ * IDE
+ */
+#define PCM990_IDE_IRQ_GPIO 13
+#define PCM990_IDE_IRQ PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */
+#define PCM990_IDE_PLD_BASE 0xee000000
+#define PCM990_IDE_PLD_SIZE (1*1024*1024)
+
+/* visible CPLD (U6) registers */
+#define PCM990_IDE_PLD_REG0 0x1000 /* OFFSET IDE REGISTER 0 */
+#define PCM990_IDE_PM5V 0x0004 /* R System VCC_5V */
+#define PCM990_IDE_STBY 0x0008 /* R System StandBy */
+
+#define PCM990_IDE_PLD_REG1 0x1002 /* OFFSET IDE REGISTER 1 */
+#define PCM990_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */
+#define PCM990_IDE_DMAENA 0x0004 /* RW DMA Enable */
+#define PCM990_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */
+
+#define PCM990_IDE_PLD_REG2 0x1004 /* OFFSET IDE REGISTER 2 */
+#define PCM990_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */
+#define PCM990_IDE_RES 0x0002 /* RW IDE Reset Bit */
+#define PCM990_IDE_RDY 0x0008 /* RDY */
+
+#define PCM990_IDE_PLD_REG3 0x1006 /* OFFSET IDE REGISTER 3 */
+#define PCM990_IDE_IDEOE 0x0001 /* RW Latch on Databus */
+#define PCM990_IDE_IDEON 0x0002 /* RW Latch on Control Address */
+#define PCM990_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */
+
+#define PCM990_IDE_PLD_REG4 0x1008 /* OFFSET IDE REGISTER 4 */
+#define PCM990_IDE_PWRENA 0x0001 /* RW IDE Power enable */
+#define PCM990_IDE_5V 0x0002 /* R IDE Power 5V */
+#define PCM990_IDE_PWG 0x0008 /* R IDE Power is on */
+
+#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
+#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
+
+/*
+ * Compact Flash
+ */
+#define PCM990_CF_IRQ_GPIO 11
+#define PCM990_CF_IRQ PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_CD_GPIO 12
+#define PCM990_CF_CD PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */
+
+/* visible CPLD (U6) registers */
+#define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */
+#define PCM990_CF_REG0_LED 0x0001 /* RW LED on */
+#define PCM990_CF_REG0_BLK 0x0002 /* RW LED flash when access */
+#define PCM990_CF_REG0_PM5V 0x0004 /* R System VCC_5V enable */
+#define PCM990_CF_REG0_STBY 0x0008 /* R System StandBy */
+
+#define PCM990_CF_PLD_REG1 0x1002 /* OFFSET CF REGISTER 1 */
+#define PCM990_CF_REG1_IDEMODE 0x0001 /* RW CF card run as TrueIDE */
+#define PCM990_CF_REG1_CF0 0x0002 /* RW CF card at ADDR 0x28000000 */
+
+#define PCM990_CF_PLD_REG2 0x1004 /* OFFSET CF REGISTER 2 */
+#define PCM990_CF_REG2_RES 0x0002 /* RW CF RESET BIT */
+#define PCM990_CF_REG2_RDYENA 0x0004 /* RW Enable CF_RDY */
+#define PCM990_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */
+
+#define PCM990_CF_PLD_REG3 0x1006 /* OFFSET CF REGISTER 3 */
+#define PCM990_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */
+#define PCM990_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */
+#define PCM990_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */
+#define PCM990_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */
+
+#define PCM990_CF_PLD_REG4 0x1008 /* OFFSET CF REGISTER 4 */
+#define PCM990_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */
+#define PCM990_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
+#define PCM990_CF_REG4_3B 0x0004 /* RW 3.0V Backup from VCC (5_3V=0) */
+#define PCM990_CF_REG4_PWG 0x0008 /* R CF-Power is on */
+
+#define PCM990_CF_PLD_REG5 0x100A /* OFFSET CF REGISTER 5 */
+#define PCM990_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */
+#define PCM990_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */
+#define PCM990_CF_REG5_VS1 0x0004 /* R CF /VS1 */
+#define PCM990_CF_REG5_VS2 0x0008 /* R CF /VS2 */
+
+#define PCM990_CF_PLD_REG6 0x100C /* OFFSET CF REGISTER 6 */
+#define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */
+#define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */
+
+/*
+ * Wolfson AC97 Touch
+ */
+#define PCM990_AC97_IRQ_GPIO 10
+#define PCM990_AC97_IRQ PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+
+/*
+ * MMC phyCORE
+ */
+#define PCM990_MMC0_IRQ_GPIO 9
+#define PCM990_MMC0_IRQ PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+
+/*
+ * USB phyCore
+ */
+#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
+#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
new file mode 100644
index 0000000..f2237f4
--- /dev/null
+++ b/arch/arm/mach-pxa/pm.c
@@ -0,0 +1,117 @@
+/*
+ * PXA250/210 Power Management Routines
+ *
+ * Original code for the SA11x0:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+ *
+ * Modified for the PXA250 by Nicolas Pitre:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+
+#include "pm.h"
+
+struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
+static unsigned long *sleep_save;
+
+int pxa_pm_enter(suspend_state_t state)
+{
+ unsigned long sleep_save_checksum = 0, checksum = 0;
+ int i;
+
+#ifdef CONFIG_IWMMXT
+ /* force any iWMMXt context to ram **/
+ if (elf_hwcap & HWCAP_IWMMXT)
+ iwmmxt_task_disable(NULL);
+#endif
+
+ /* skip registers saving for standby */
+ if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->save) {
+ pxa_cpu_pm_fns->save(sleep_save);
+ /* before sleeping, calculate and save a checksum */
+ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
+ sleep_save_checksum += sleep_save[i];
+ }
+
+ /* *** go zzz *** */
+ pxa_cpu_pm_fns->enter(state);
+
+ if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) {
+ /* after sleeping, validate the checksum */
+ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
+ checksum += sleep_save[i];
+
+ /* if invalid, display message and wait for a hardware reset */
+ if (checksum != sleep_save_checksum) {
+
+ lubbock_set_hexled(0xbadbadc5);
+
+ while (1)
+ pxa_cpu_pm_fns->enter(state);
+ }
+ pxa_cpu_pm_fns->restore(sleep_save);
+ }
+
+ pr_debug("*** made it back from resume\n");
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(pxa_pm_enter);
+
+static int pxa_pm_valid(suspend_state_t state)
+{
+ if (pxa_cpu_pm_fns)
+ return pxa_cpu_pm_fns->valid(state);
+
+ return -EINVAL;
+}
+
+int pxa_pm_prepare(void)
+{
+ int ret = 0;
+
+ if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->prepare)
+ ret = pxa_cpu_pm_fns->prepare();
+
+ return ret;
+}
+
+void pxa_pm_finish(void)
+{
+ if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
+ pxa_cpu_pm_fns->finish();
+}
+
+static const struct platform_suspend_ops pxa_pm_ops = {
+ .valid = pxa_pm_valid,
+ .enter = pxa_pm_enter,
+ .prepare = pxa_pm_prepare,
+ .finish = pxa_pm_finish,
+};
+
+static int __init pxa_pm_init(void)
+{
+ if (!pxa_cpu_pm_fns) {
+ printk(KERN_ERR "no valid pxa_cpu_pm_fns defined\n");
+ return -EINVAL;
+ }
+
+ sleep_save = kmalloc_array(pxa_cpu_pm_fns->save_count,
+ sizeof(*sleep_save),
+ GFP_KERNEL);
+ if (!sleep_save)
+ return -ENOMEM;
+
+ suspend_set_ops(&pxa_pm_ops);
+ return 0;
+}
+
+device_initcall(pxa_pm_init);
diff --git a/arch/arm/mach-pxa/pm.h b/arch/arm/mach-pxa/pm.h
new file mode 100644
index 0000000..3aab90d
--- /dev/null
+++ b/arch/arm/mach-pxa/pm.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/suspend.h>
+
+struct pxa_cpu_pm_fns {
+ int save_count;
+ void (*save)(unsigned long *);
+ void (*restore)(unsigned long *);
+ int (*valid)(suspend_state_t state);
+ void (*enter)(suspend_state_t state);
+ int (*prepare)(void);
+ void (*finish)(void);
+};
+
+extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
+
+/* sleep.S */
+extern int pxa25x_finish_suspend(unsigned long);
+extern int pxa27x_finish_suspend(unsigned long);
+
+extern int pxa_pm_enter(suspend_state_t state);
+extern int pxa_pm_prepare(void);
+extern void pxa_pm_finish(void);
+
+extern const char pm_enter_standby_start[], pm_enter_standby_end[];
+extern int pxa3xx_finish_suspend(unsigned long);
+
+/* NOTE: this is for PM debugging on Lubbock, it's really a big
+ * ugly, but let's keep the crap minimum here, instead of direct
+ * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
+ */
+#ifdef CONFIG_ARCH_LUBBOCK
+extern void lubbock_set_hexled(uint32_t value);
+#else
+#define lubbock_set_hexled(x)
+#endif
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
new file mode 100644
index 0000000..1adde12
--- /dev/null
+++ b/arch/arm/mach-pxa/poodle.c
@@ -0,0 +1,465 @@
+/*
+ * linux/arch/arm/mach-pxa/poodle.c
+ *
+ * Support for the SHARP Poodle Board.
+ *
+ * Based on:
+ * linux/arch/arm/mach-pxa/lubbock.c Author: Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Change Log
+ * 12-Dec-2002 Sharp Corporation for Poodle
+ * John Lenz <lenz@cs.wisc.edu> updates to 2.6
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/mtd/sharpsl.h>
+#include <linux/memblock.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/setup.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "pxa25x.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include "udc.h"
+#include <linux/platform_data/irda-pxaficp.h>
+#include <mach/poodle.h>
+#include <linux/platform_data/video-pxafb.h>
+
+#include <asm/hardware/scoop.h>
+#include <asm/hardware/locomo.h>
+#include <asm/mach/sharpsl_param.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long poodle_pin_config[] __initdata = {
+ /* I/O */
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO18_RDY,
+
+ /* Clock */
+ GPIO12_32KHz,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+ GPIO24_GPIO, /* POODLE_GPIO_TP_CS - SFRM as chip select */
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+ GPIO32_I2S_SYSCLK,
+
+ /* Infra-Red */
+ GPIO47_FICP_TXD,
+ GPIO46_FICP_RXD,
+
+ /* FFUART */
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+ GPIO39_FFUART_TXD,
+ GPIO37_FFUART_DSR,
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+
+ /* GPIO */
+ GPIO9_GPIO, /* POODLE_GPIO_nSD_DETECT */
+ GPIO7_GPIO, /* POODLE_GPIO_nSD_WP */
+ GPIO3_GPIO, /* POODLE_GPIO_SD_PWR */
+ GPIO33_GPIO, /* POODLE_GPIO_SD_PWR1 */
+
+ GPIO20_GPIO, /* POODLE_GPIO_USB_PULLUP */
+ GPIO22_GPIO, /* POODLE_GPIO_IR_ON */
+};
+
+static struct resource poodle_scoop_resources[] = {
+ [0] = {
+ .start = 0x10800000,
+ .end = 0x10800fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config poodle_scoop_setup = {
+ .io_dir = POODLE_SCOOP_IO_DIR,
+ .io_out = POODLE_SCOOP_IO_OUT,
+ .gpio_base = POODLE_SCOOP_GPIO_BASE,
+};
+
+struct platform_device poodle_scoop_device = {
+ .name = "sharp-scoop",
+ .id = -1,
+ .dev = {
+ .platform_data = &poodle_scoop_setup,
+ },
+ .num_resources = ARRAY_SIZE(poodle_scoop_resources),
+ .resource = poodle_scoop_resources,
+};
+
+static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
+{
+ .dev = &poodle_scoop_device.dev,
+ .irq = POODLE_IRQ_GPIO_CF_IRQ,
+ .cd_irq = POODLE_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+},
+};
+
+static struct scoop_pcmcia_config poodle_pcmcia_config = {
+ .devs = &poodle_pcmcia_scoop[0],
+ .num_devs = 1,
+};
+
+EXPORT_SYMBOL(poodle_scoop_device);
+
+
+static struct platform_device poodle_audio_device = {
+ .name = "poodle-audio",
+ .id = -1,
+};
+
+/* LoCoMo device */
+static struct resource locomo_resources[] = {
+ [0] = {
+ .start = 0x10000000,
+ .end = 0x10001fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(10),
+ .end = PXA_GPIO_TO_IRQ(10),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct locomo_platform_data locomo_info = {
+ .irq_base = IRQ_BOARD_START,
+};
+
+struct platform_device poodle_locomo_device = {
+ .name = "locomo",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(locomo_resources),
+ .resource = locomo_resources,
+ .dev = {
+ .platform_data = &locomo_info,
+ },
+};
+
+EXPORT_SYMBOL(poodle_locomo_device);
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master poodle_spi_info = {
+ .num_chipselect = 1,
+};
+
+static struct ads7846_platform_data poodle_ads7846_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .gpio_pendown = POODLE_GPIO_TP_INT,
+};
+
+static struct pxa2xx_spi_chip poodle_ads7846_chip = {
+ .gpio_cs = POODLE_GPIO_TP_CS,
+};
+
+static struct spi_board_info poodle_spi_devices[] = {
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 10000,
+ .bus_num = 1,
+ .platform_data = &poodle_ads7846_info,
+ .controller_data= &poodle_ads7846_chip,
+ .irq = PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
+ },
+};
+
+static void __init poodle_init_spi(void)
+{
+ pxa2xx_set_spi_info(1, &poodle_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
+}
+#else
+static inline void poodle_init_spi(void) {}
+#endif
+
+/*
+ * MMC/SD Device
+ *
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
+{
+ int err;
+
+ err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
+ if (err)
+ goto err_free_2;
+
+ err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
+ if (err)
+ goto err_free_3;
+
+ gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
+ gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
+
+ return 0;
+
+err_free_3:
+ gpio_free(POODLE_GPIO_SD_PWR);
+err_free_2:
+ return err;
+}
+
+static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask) {
+ gpio_set_value(POODLE_GPIO_SD_PWR, 1);
+ mdelay(2);
+ gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
+ } else {
+ gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
+ gpio_set_value(POODLE_GPIO_SD_PWR, 0);
+ }
+
+ return 0;
+}
+
+static void poodle_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(POODLE_GPIO_SD_PWR1);
+ gpio_free(POODLE_GPIO_SD_PWR);
+}
+
+static struct pxamci_platform_data poodle_mci_platform_data = {
+ .detect_delay_ms = 250,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = poodle_mci_init,
+ .setpower = poodle_mci_setpower,
+ .exit = poodle_mci_exit,
+ .gpio_card_detect = POODLE_GPIO_nSD_DETECT,
+ .gpio_card_ro = POODLE_GPIO_nSD_WP,
+ .gpio_power = -1,
+};
+
+
+/*
+ * Irda
+ */
+static struct pxaficp_platform_data poodle_ficp_platform_data = {
+ .gpio_pwdown = POODLE_GPIO_IR_ON,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+
+/*
+ * USB Device Controller
+ */
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+ /* no connect GPIO; poodle can't tell connection status */
+ .gpio_pullup = POODLE_GPIO_USB_PULLUP,
+};
+
+
+/* PXAFB device */
+static struct pxafb_mode_info poodle_fb_mode = {
+ .pixclock = 144700,
+ .xres = 320,
+ .yres = 240,
+ .bpp = 16,
+ .hsync_len = 7,
+ .left_margin = 11,
+ .right_margin = 30,
+ .vsync_len = 2,
+ .upper_margin = 2,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info poodle_fb_info = {
+ .modes = &poodle_fb_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr sharpsl_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static const char * const probes[] = {
+ "cmdlinepart",
+ "ofpart",
+ "sharpslpart",
+ NULL,
+};
+
+static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
+ .badblock_pattern = &sharpsl_bbt,
+ .part_parsers = probes,
+};
+
+static struct resource sharpsl_nand_resources[] = {
+ {
+ .start = 0x0C000000,
+ .end = 0x0C000FFF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_nand_device = {
+ .name = "sharpsl-nand",
+ .id = -1,
+ .resource = sharpsl_nand_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_nand_resources),
+ .dev.platform_data = &sharpsl_nand_platform_data,
+};
+
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00120000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &poodle_locomo_device,
+ &poodle_scoop_device,
+ &poodle_audio_device,
+ &sharpsl_nand_device,
+ &sharpsl_rom_device,
+};
+
+static struct i2c_board_info __initdata poodle_i2c_devices[] = {
+ { I2C_BOARD_INFO("wm8731", 0x1b) },
+};
+
+static void poodle_poweroff(void)
+{
+ pxa_restart(REBOOT_HARD, NULL);
+}
+
+static void __init poodle_init(void)
+{
+ int ret = 0;
+
+ pm_power_off = poodle_poweroff;
+
+ PCFR |= PCFR_OPDE;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ platform_scoop_config = &poodle_pcmcia_config;
+
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (ret)
+ pr_warn("poodle: Unable to register LoCoMo device\n");
+
+ pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
+ pxa_set_udc_info(&udc_info);
+ pxa_set_mci_info(&poodle_mci_platform_data);
+ pxa_set_ficp_info(&poodle_ficp_platform_data);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
+ poodle_init_spi();
+ regulator_has_full_constraints();
+}
+
+static void __init fixup_poodle(struct tag *tags, char **cmdline)
+{
+ sharpsl_save_param();
+ memblock_add(0xa0000000, SZ_32M);
+}
+
+MACHINE_START(POODLE, "SHARP Poodle")
+ .fixup = fixup_poodle,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = poodle_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
new file mode 100644
index 0000000..aa9b255
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -0,0 +1,60 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa-dt.c
+ *
+ * Copyright (C) 2012 Daniel Mack
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+
+#include "generic.h"
+
+#ifdef CONFIG_PXA25x
+static const char * const pxa25x_dt_board_compat[] __initconst = {
+ "marvell,pxa250",
+ NULL,
+};
+
+DT_MACHINE_START(PXA25X_DT, "Marvell PXA25x (Device Tree Support)")
+ .map_io = pxa25x_map_io,
+ .restart = pxa_restart,
+ .dt_compat = pxa25x_dt_board_compat,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_PXA27x
+static const char * const pxa27x_dt_board_compat[] __initconst = {
+ "marvell,pxa270",
+ NULL,
+};
+
+DT_MACHINE_START(PXA27X_DT, "Marvell PXA27x (Device Tree Support)")
+ .map_io = pxa27x_map_io,
+ .restart = pxa_restart,
+ .dt_compat = pxa27x_dt_board_compat,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_PXA3xx
+static const char *const pxa3xx_dt_board_compat[] __initconst = {
+ "marvell,pxa300",
+ "marvell,pxa310",
+ "marvell,pxa320",
+ NULL,
+};
+
+DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
+ .map_io = pxa3xx_map_io,
+ .restart = pxa_restart,
+ .dt_compat = pxa3xx_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
new file mode 100644
index 0000000..ab8808c
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -0,0 +1,264 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa25x.c
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * Code specific to PXA21x/25x/26x variants.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Since this file should be linked before any other machine specific file,
+ * the __initcall() here will be executed first. This serves as default
+ * initialization stuff for PXA machines which can be overridden later if
+ * need be.
+ */
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
+#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/platform_data/mmp_dma.h>
+
+#include <asm/mach/map.h>
+#include <asm/suspend.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include "pxa25x.h"
+#include <mach/reset.h>
+#include "pm.h"
+#include <mach/dma.h>
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * Various clock factors driven by the CCCR register.
+ */
+
+#ifdef CONFIG_PM
+
+#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
+#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
+
+/*
+ * List of global PXA peripheral registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+enum {
+ SLEEP_SAVE_PSTR,
+ SLEEP_SAVE_COUNT
+};
+
+
+static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
+{
+ SAVE(PSTR);
+}
+
+static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
+{
+ RESTORE(PSTR);
+}
+
+static void pxa25x_cpu_pm_enter(suspend_state_t state)
+{
+ /* Clear reset status */
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend);
+ break;
+ }
+}
+
+static int pxa25x_cpu_pm_prepare(void)
+{
+ /* set resume return address */
+ PSPR = __pa_symbol(cpu_resume);
+ return 0;
+}
+
+static void pxa25x_cpu_pm_finish(void)
+{
+ /* ensure not to come back here if it wasn't intended */
+ PSPR = 0;
+}
+
+static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
+ .save_count = SLEEP_SAVE_COUNT,
+ .valid = suspend_valid_only_mem,
+ .save = pxa25x_cpu_pm_save,
+ .restore = pxa25x_cpu_pm_restore,
+ .enter = pxa25x_cpu_pm_enter,
+ .prepare = pxa25x_cpu_pm_prepare,
+ .finish = pxa25x_cpu_pm_finish,
+};
+
+static void __init pxa25x_init_pm(void)
+{
+ pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns;
+}
+#else
+static inline void pxa25x_init_pm(void) {}
+#endif
+
+/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
+ */
+
+static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
+{
+ int gpio = pxa_irq_to_gpio(d->irq);
+ uint32_t mask = 0;
+
+ if (gpio >= 0 && gpio < 85)
+ return gpio_set_wake(gpio, on);
+
+ if (d->irq == IRQ_RTCAlrm) {
+ mask = PWER_RTC;
+ goto set_pwer;
+ }
+
+ return -EINVAL;
+
+set_pwer:
+ if (on)
+ PWER |= mask;
+ else
+ PWER &=~mask;
+
+ return 0;
+}
+
+void __init pxa25x_init_irq(void)
+{
+ pxa_init_irq(32, pxa25x_set_wake);
+}
+
+#ifdef CONFIG_CPU_PXA26x
+void __init pxa26x_init_irq(void)
+{
+ pxa_init_irq(32, pxa25x_set_wake);
+}
+#endif
+
+static int __init __init
+pxa25x_dt_init_irq(struct device_node *node, struct device_node *parent)
+{
+ pxa_dt_irq_init(pxa25x_set_wake);
+ set_handle_irq(icip_handle_irq);
+
+ return 0;
+}
+IRQCHIP_DECLARE(pxa25x_intc, "marvell,pxa-intc", pxa25x_dt_init_irq);
+
+static struct map_desc pxa25x_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = (unsigned long)SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
+ .length = SMEMC_SIZE,
+ .type = MT_DEVICE
+ }, { /* UNCACHED_PHYS_0 */
+ .virtual = UNCACHED_PHYS_0,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = UNCACHED_PHYS_0_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+void __init pxa25x_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa25x_io_desc));
+ pxa25x_get_clk_frequency_khz(1);
+}
+
+static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = {
+ .irq_base = PXA_GPIO_TO_IRQ(0),
+ .gpio_set_wake = gpio_set_wake,
+};
+
+static struct platform_device *pxa25x_devices[] __initdata = {
+ &pxa25x_device_udc,
+ &pxa_device_pmu,
+ &pxa_device_i2s,
+ &sa1100_device_rtc,
+ &pxa25x_device_ssp,
+ &pxa25x_device_nssp,
+ &pxa25x_device_assp,
+ &pxa25x_device_pwm0,
+ &pxa25x_device_pwm1,
+ &pxa_device_asoc_platform,
+};
+
+static const struct dma_slave_map pxa25x_slave_map[] = {
+ /* PXA25x, PXA27x and PXA3xx common entries */
+ { "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+ PDMA_FILTER_PARAM(LOWEST, 10) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+ { "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+ { "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+ { "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+ { "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+ { "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+ { "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+ { "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+ { "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+
+ /* PXA25x specific map */
+ { "pxa25x-ssp.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+ { "pxa25x-ssp.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+ { "pxa25x-nssp.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+ { "pxa25x-nssp.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+ { "pxa25x-nssp.2", "rx", PDMA_FILTER_PARAM(LOWEST, 23) },
+ { "pxa25x-nssp.2", "tx", PDMA_FILTER_PARAM(LOWEST, 24) },
+};
+
+static struct mmp_dma_platdata pxa25x_dma_pdata = {
+ .dma_channels = 16,
+ .nb_requestors = 40,
+ .slave_map = pxa25x_slave_map,
+ .slave_map_cnt = ARRAY_SIZE(pxa25x_slave_map),
+};
+
+static int __init pxa25x_init(void)
+{
+ int ret = 0;
+
+ if (cpu_is_pxa25x()) {
+
+ reset_status = RCSR;
+
+ pxa25x_init_pm();
+
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa2xx_mfp_syscore_ops);
+
+ if (!of_have_populated_dt()) {
+ pxa2xx_set_dmac_info(&pxa25x_dma_pdata);
+ pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
+ ret = platform_add_devices(pxa25x_devices,
+ ARRAY_SIZE(pxa25x_devices));
+ }
+ }
+
+ return ret;
+}
+
+postcore_initcall(pxa25x_init);
diff --git a/arch/arm/mach-pxa/pxa25x.h b/arch/arm/mach-pxa/pxa25x.h
new file mode 100644
index 0000000..b58d0fb
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa25x.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_PXA25x_H
+#define __MACH_PXA25x_H
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include "mfp-pxa25x.h"
+#include <mach/irqs.h>
+
+#endif /* __MACH_PXA25x_H */
diff --git a/arch/arm/mach-pxa/pxa27x-udc.h b/arch/arm/mach-pxa/pxa27x-udc.h
new file mode 100644
index 0000000..faf7380
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa27x-udc.h
@@ -0,0 +1,258 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARCH_PXA27X_UDC_H
+#define _ASM_ARCH_PXA27X_UDC_H
+
+#ifdef _ASM_ARCH_PXA25X_UDC_H
+#error You cannot include both PXA25x and PXA27x UDC support
+#endif
+
+#define UDCCR __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
+#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
+ Protocol Port Support */
+#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
+ Support */
+#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
+ Enable */
+#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
+#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
+#define UDCCR_ACN_S 11
+#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
+#define UDCCR_AIN_S 8
+#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
+ Setting Number */
+#define UDCCR_AAISN_S 5
+#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
+ Configuration */
+#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
+ Error */
+#define UDCCR_UDR (1 << 2) /* UDC Resume */
+#define UDCCR_UDA (1 << 1) /* UDC Active */
+#define UDCCR_UDE (1 << 0) /* UDC Enable */
+
+#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */
+#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */
+#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
+
+#define UDC_INT_FIFOERROR (0x2)
+#define UDC_INT_PACKETCMP (0x1)
+
+#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
+#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
+#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
+#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
+#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
+
+#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
+#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
+#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
+#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
+#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
+#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
+
+#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
+#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR (1 << 17) /* Extra Transceiver Interrupt
+ Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF (1 << 16) /* Extra Transceiver Interrupt
+ Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
+ Edge Interrupt Enable */
+#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
+ Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
+ Interrupt Enable */
+
+#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */
+#define UP3OCR __REG(0x40600024) /* USB Port 2 Output Control register */
+
+#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
+#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */
+#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */
+#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */
+#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */
+#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
+#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
+#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
+#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */
+#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */
+#define UP2OCR_SEOS(x) ((x & 7) << 24) /* Single-Ended Output Select */
+
+#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
+#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0_SA (1 << 7) /* Setup Active */
+#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
+#define UDCCSR0_FST (1 << 5) /* Force Stall */
+#define UDCCSR0_SST (1 << 4) /* Sent Stall */
+#define UDCCSR0_DME (1 << 3) /* DMA Enable */
+#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
+#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
+#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
+
+#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+
+#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
+#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
+#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
+#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST (1 << 5) /* Force STALL */
+#define UDCCSR_SST (1 << 4) /* Sent STALL */
+#define UDCCSR_DME (1 << 3) /* DMA Enable */
+#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
+#define UDCCSR_PC (1 << 1) /* Packet Complete */
+#define UDCCSR_FS (1 << 0) /* FIFO needs service */
+
+#define UDCBCN(x) __REG2(0x40600200, (x)<<2)
+#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */
+
+#define UDCDN(x) __REG2(0x40600300, (x)<<2)
+#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2))
+#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
+#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */
+#define UDCDRA __REG(0x40600304) /* Data Register - EPA */
+#define UDCDRB __REG(0x40600308) /* Data Register - EPB */
+#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */
+#define UDCDRD __REG(0x40600310) /* Data Register - EPD */
+#define UDCDRE __REG(0x40600314) /* Data Register - EPE */
+#define UDCDRF __REG(0x40600318) /* Data Register - EPF */
+#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */
+#define UDCDRH __REG(0x40600320) /* Data Register - EPH */
+#define UDCDRI __REG(0x40600324) /* Data Register - EPI */
+#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */
+#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */
+#define UDCDRL __REG(0x40600330) /* Data Register - EPL */
+#define UDCDRM __REG(0x40600334) /* Data Register - EPM */
+#define UDCDRN __REG(0x40600338) /* Data Register - EPN */
+#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */
+#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */
+#define UDCDRR __REG(0x40600344) /* Data Register - EPR */
+#define UDCDRS __REG(0x40600348) /* Data Register - EPS */
+#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */
+#define UDCDRU __REG(0x40600350) /* Data Register - EPU */
+#define UDCDRV __REG(0x40600354) /* Data Register - EPV */
+#define UDCDRW __REG(0x40600358) /* Data Register - EPW */
+#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */
+
+#define UDCCN(x) __REG2(0x40600400, (x)<<2)
+#define UDCCRA __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB __REG(0x40600408) /* Configuration register EPB */
+#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */
+#define UDCCRD __REG(0x40600410) /* Configuration register EPD */
+#define UDCCRE __REG(0x40600414) /* Configuration register EPE */
+#define UDCCRF __REG(0x40600418) /* Configuration register EPF */
+#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */
+#define UDCCRH __REG(0x40600420) /* Configuration register EPH */
+#define UDCCRI __REG(0x40600424) /* Configuration register EPI */
+#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */
+#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */
+#define UDCCRL __REG(0x40600430) /* Configuration register EPL */
+#define UDCCRM __REG(0x40600434) /* Configuration register EPM */
+#define UDCCRN __REG(0x40600438) /* Configuration register EPN */
+#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */
+#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */
+#define UDCCRR __REG(0x40600444) /* Configuration register EPR */
+#define UDCCRS __REG(0x40600448) /* Configuration register EPS */
+#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */
+#define UDCCRU __REG(0x40600450) /* Configuration register EPU */
+#define UDCCRV __REG(0x40600454) /* Configuration register EPV */
+#define UDCCRW __REG(0x40600458) /* Configuration register EPW */
+#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */
+
+#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
+#define UDCCONR_CN_S (25)
+#define UDCCONR_IN (0x07 << 22) /* Interface Number */
+#define UDCCONR_IN_S (22)
+#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
+#define UDCCONR_AISN_S (19)
+#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
+#define UDCCONR_EN_S (15)
+#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
+#define UDCCONR_ET_S (13)
+#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
+#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
+#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
+#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
+#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
+#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
+#define UDCCONR_MPS_S (2)
+#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
+#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
+
+
+#define UDC_INT_FIFOERROR (0x2)
+#define UDC_INT_PACKETCMP (0x1)
+
+#define UDC_FNR_MASK (0x7ff)
+
+#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK (0x3ff)
+
+#endif
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
new file mode 100644
index 0000000..5a8990a
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -0,0 +1,362 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa27x.c
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 05, 2002
+ * Copyright: MontaVista Software Inc.
+ *
+ * Code specific to PXA27x aka Bulverde.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
+#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/suspend.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/mmp_dma.h>
+
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/suspend.h>
+#include <mach/irqs.h>
+#include "pxa27x.h"
+#include <mach/reset.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include "pm.h"
+#include <mach/dma.h>
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+void pxa27x_clear_otgph(void)
+{
+ if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
+ PSSR |= PSSR_OTGPH;
+}
+EXPORT_SYMBOL(pxa27x_clear_otgph);
+
+static unsigned long ac97_reset_config[] = {
+ GPIO113_AC97_nRESET_GPIO_HIGH,
+ GPIO113_AC97_nRESET,
+ GPIO95_AC97_nRESET_GPIO_HIGH,
+ GPIO95_AC97_nRESET,
+};
+
+void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio)
+{
+ /*
+ * This helper function is used to work around a bug in the pxa27x's
+ * ac97 controller during a warm reset. The configuration of the
+ * reset_gpio is changed as follows:
+ * to_gpio == true: configured to generic output gpio and driven high
+ * to_gpio == false: configured to ac97 controller alt fn AC97_nRESET
+ */
+
+ if (reset_gpio == 113)
+ pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[0] :
+ &ac97_reset_config[1], 1);
+
+ if (reset_gpio == 95)
+ pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[2] :
+ &ac97_reset_config[3], 1);
+}
+EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
+
+#ifdef CONFIG_PM
+
+#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
+#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
+
+/*
+ * allow platforms to override default PWRMODE setting used for PM_SUSPEND_MEM
+ */
+static unsigned int pwrmode = PWRMODE_SLEEP;
+
+int pxa27x_set_pwrmode(unsigned int mode)
+{
+ switch (mode) {
+ case PWRMODE_SLEEP:
+ case PWRMODE_DEEPSLEEP:
+ pwrmode = mode;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * List of global PXA peripheral registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+enum {
+ SLEEP_SAVE_PSTR,
+ SLEEP_SAVE_MDREFR,
+ SLEEP_SAVE_PCFR,
+ SLEEP_SAVE_COUNT
+};
+
+void pxa27x_cpu_pm_save(unsigned long *sleep_save)
+{
+ sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
+ SAVE(PCFR);
+
+ SAVE(PSTR);
+}
+
+void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
+{
+ __raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
+ RESTORE(PCFR);
+
+ PSSR = PSSR_RDH | PSSR_PH;
+
+ RESTORE(PSTR);
+}
+
+void pxa27x_cpu_pm_enter(suspend_state_t state)
+{
+ extern void pxa_cpu_standby(void);
+#ifndef CONFIG_IWMMXT
+ u64 acc0;
+
+ asm volatile(".arch_extension xscale\n\t"
+ "mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
+
+ /* ensure voltage-change sequencer not initiated, which hangs */
+ PCFR &= ~PCFR_FVC;
+
+ /* Clear edge-detect status register. */
+ PEDR = 0xDF12FE1B;
+
+ /* Clear reset status */
+ RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pxa_cpu_standby();
+ break;
+ case PM_SUSPEND_MEM:
+ cpu_suspend(pwrmode, pxa27x_finish_suspend);
+#ifndef CONFIG_IWMMXT
+ asm volatile(".arch_extension xscale\n\t"
+ "mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
+ break;
+ }
+}
+
+static int pxa27x_cpu_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static int pxa27x_cpu_pm_prepare(void)
+{
+ /* set resume return address */
+ PSPR = __pa_symbol(cpu_resume);
+ return 0;
+}
+
+static void pxa27x_cpu_pm_finish(void)
+{
+ /* ensure not to come back here if it wasn't intended */
+ PSPR = 0;
+}
+
+static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
+ .save_count = SLEEP_SAVE_COUNT,
+ .save = pxa27x_cpu_pm_save,
+ .restore = pxa27x_cpu_pm_restore,
+ .valid = pxa27x_cpu_pm_valid,
+ .enter = pxa27x_cpu_pm_enter,
+ .prepare = pxa27x_cpu_pm_prepare,
+ .finish = pxa27x_cpu_pm_finish,
+};
+
+static void __init pxa27x_init_pm(void)
+{
+ pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
+}
+#else
+static inline void pxa27x_init_pm(void) {}
+#endif
+
+/* PXA27x: Various gpios can issue wakeup events. This logic only
+ * handles the simple cases, not the WEMUX2 and WEMUX3 options
+ */
+static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
+{
+ int gpio = pxa_irq_to_gpio(d->irq);
+ uint32_t mask;
+
+ if (gpio >= 0 && gpio < 128)
+ return gpio_set_wake(gpio, on);
+
+ if (d->irq == IRQ_KEYPAD)
+ return keypad_set_wake(on);
+
+ switch (d->irq) {
+ case IRQ_RTCAlrm:
+ mask = PWER_RTC;
+ break;
+ case IRQ_USB:
+ mask = 1u << 26;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (on)
+ PWER |= mask;
+ else
+ PWER &=~mask;
+
+ return 0;
+}
+
+void __init pxa27x_init_irq(void)
+{
+ pxa_init_irq(34, pxa27x_set_wake);
+}
+
+static int __init
+pxa27x_dt_init_irq(struct device_node *node, struct device_node *parent)
+{
+ pxa_dt_irq_init(pxa27x_set_wake);
+ set_handle_irq(ichp_handle_irq);
+
+ return 0;
+}
+IRQCHIP_DECLARE(pxa27x_intc, "marvell,pxa-intc", pxa27x_dt_init_irq);
+
+static struct map_desc pxa27x_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = (unsigned long)SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
+ .length = SMEMC_SIZE,
+ .type = MT_DEVICE
+ }, { /* UNCACHED_PHYS_0 */
+ .virtual = UNCACHED_PHYS_0,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = UNCACHED_PHYS_0_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+void __init pxa27x_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa27x_io_desc));
+ pxa27x_get_clk_frequency_khz(1);
+}
+
+/*
+ * device registration specific to PXA27x.
+ */
+void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+ local_irq_disable();
+ PCFR |= PCFR_PI2CEN;
+ local_irq_enable();
+ pxa_register_device(&pxa27x_device_i2c_power, info);
+}
+
+static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
+ .irq_base = PXA_GPIO_TO_IRQ(0),
+ .gpio_set_wake = gpio_set_wake,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &pxa27x_device_udc,
+ &pxa_device_pmu,
+ &pxa_device_i2s,
+ &pxa_device_asoc_ssp1,
+ &pxa_device_asoc_ssp2,
+ &pxa_device_asoc_ssp3,
+ &pxa_device_asoc_platform,
+ &pxa_device_rtc,
+ &pxa27x_device_ssp1,
+ &pxa27x_device_ssp2,
+ &pxa27x_device_ssp3,
+ &pxa27x_device_pwm0,
+ &pxa27x_device_pwm1,
+};
+
+static const struct dma_slave_map pxa27x_slave_map[] = {
+ /* PXA25x, PXA27x and PXA3xx common entries */
+ { "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+ PDMA_FILTER_PARAM(LOWEST, 10) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+ { "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+ { "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+ { "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+ { "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+ { "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+ { "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+ { "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+ { "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+ { "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
+ { "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
+
+ /* PXA27x specific map */
+ { "pxa2xx-i2s", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
+ { "pxa2xx-i2s", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
+ { "pxa27x-camera.0", "CI_Y", PDMA_FILTER_PARAM(HIGHEST, 68) },
+ { "pxa27x-camera.0", "CI_U", PDMA_FILTER_PARAM(HIGHEST, 69) },
+ { "pxa27x-camera.0", "CI_V", PDMA_FILTER_PARAM(HIGHEST, 70) },
+};
+
+static struct mmp_dma_platdata pxa27x_dma_pdata = {
+ .dma_channels = 32,
+ .nb_requestors = 75,
+ .slave_map = pxa27x_slave_map,
+ .slave_map_cnt = ARRAY_SIZE(pxa27x_slave_map),
+};
+
+static int __init pxa27x_init(void)
+{
+ int ret = 0;
+
+ if (cpu_is_pxa27x()) {
+
+ reset_status = RCSR;
+
+ pxa27x_init_pm();
+
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa2xx_mfp_syscore_ops);
+
+ if (!of_have_populated_dt()) {
+ pxa_register_device(&pxa27x_device_gpio,
+ &pxa27x_gpio_info);
+ pxa2xx_set_dmac_info(&pxa27x_dma_pdata);
+ ret = platform_add_devices(devices,
+ ARRAY_SIZE(devices));
+ }
+ }
+
+ return ret;
+}
+
+postcore_initcall(pxa27x_init);
diff --git a/arch/arm/mach-pxa/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h
new file mode 100644
index 0000000..abdc02f
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa27x.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_PXA27x_H
+#define __MACH_PXA27x_H
+
+#include <linux/suspend.h>
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include "mfp-pxa27x.h"
+#include <mach/irqs.h>
+
+#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
+#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
+#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
+#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
+#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
+
+extern int pxa27x_set_pwrmode(unsigned int mode);
+extern void pxa27x_cpu_pm_enter(suspend_state_t state);
+
+#endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
new file mode 100644
index 0000000..6b5e566
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -0,0 +1,56 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa2xx.c
+ *
+ * code specific to pxa2xx
+ *
+ * Copyright (C) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include "mfp-pxa25x.h"
+#include <mach/reset.h>
+#include <linux/platform_data/irda-pxaficp.h>
+
+void pxa2xx_clear_reset_status(unsigned int mask)
+{
+ /* RESET_STATUS_* has a 1:1 mapping with RCSR */
+ RCSR = mask;
+}
+
+static unsigned long pxa2xx_mfp_fir[] = {
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+};
+
+static unsigned long pxa2xx_mfp_sir[] = {
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+};
+
+static unsigned long pxa2xx_mfp_off[] = {
+ GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
+};
+
+void pxa2xx_transceiver_mode(struct device *dev, int mode)
+{
+ if (mode & IR_OFF) {
+ pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
+ } else if (mode & IR_SIRMODE) {
+ pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
+ } else if (mode & IR_FIRMODE) {
+ pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
+ } else
+ BUG();
+}
+EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
new file mode 100644
index 0000000..df83b1b
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -0,0 +1,99 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa300.c
+ *
+ * Code specific to PXA300/PXA310
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include "pxa300.h"
+
+#include "generic.h"
+#include "devices.h"
+
+static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
+
+ MFP_ADDR_X(GPIO0, GPIO2, 0x00b4),
+ MFP_ADDR_X(GPIO3, GPIO26, 0x027c),
+ MFP_ADDR_X(GPIO27, GPIO98, 0x0400),
+ MFP_ADDR_X(GPIO99, GPIO127, 0x0600),
+ MFP_ADDR_X(GPIO0_2, GPIO1_2, 0x0674),
+ MFP_ADDR_X(GPIO2_2, GPIO6_2, 0x02dc),
+
+ MFP_ADDR(nBE0, 0x0204),
+ MFP_ADDR(nBE1, 0x0208),
+
+ MFP_ADDR(nLUA, 0x0244),
+ MFP_ADDR(nLLA, 0x0254),
+
+ MFP_ADDR(DF_CLE_nOE, 0x0240),
+ MFP_ADDR(DF_nRE_nOE, 0x0200),
+ MFP_ADDR(DF_ALE_nWE, 0x020C),
+ MFP_ADDR(DF_INT_RnB, 0x00C8),
+ MFP_ADDR(DF_nCS0, 0x0248),
+ MFP_ADDR(DF_nCS1, 0x0278),
+ MFP_ADDR(DF_nWE, 0x00CC),
+
+ MFP_ADDR(DF_ADDR0, 0x0210),
+ MFP_ADDR(DF_ADDR1, 0x0214),
+ MFP_ADDR(DF_ADDR2, 0x0218),
+ MFP_ADDR(DF_ADDR3, 0x021C),
+
+ MFP_ADDR(DF_IO0, 0x0220),
+ MFP_ADDR(DF_IO1, 0x0228),
+ MFP_ADDR(DF_IO2, 0x0230),
+ MFP_ADDR(DF_IO3, 0x0238),
+ MFP_ADDR(DF_IO4, 0x0258),
+ MFP_ADDR(DF_IO5, 0x0260),
+ MFP_ADDR(DF_IO6, 0x0268),
+ MFP_ADDR(DF_IO7, 0x0270),
+ MFP_ADDR(DF_IO8, 0x0224),
+ MFP_ADDR(DF_IO9, 0x022C),
+ MFP_ADDR(DF_IO10, 0x0234),
+ MFP_ADDR(DF_IO11, 0x023C),
+ MFP_ADDR(DF_IO12, 0x025C),
+ MFP_ADDR(DF_IO13, 0x0264),
+ MFP_ADDR(DF_IO14, 0x026C),
+ MFP_ADDR(DF_IO15, 0x0274),
+
+ MFP_ADDR_END,
+};
+
+/* override pxa300 MFP register addresses */
+static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
+ MFP_ADDR_X(GPIO30, GPIO98, 0x0418),
+ MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
+
+ MFP_ADDR(ULPI_STP, 0x040C),
+ MFP_ADDR(ULPI_NXT, 0x0410),
+ MFP_ADDR(ULPI_DIR, 0x0414),
+
+ MFP_ADDR_END,
+};
+
+static int __init pxa300_init(void)
+{
+ if (cpu_is_pxa300() || cpu_is_pxa310()) {
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa300_mfp_addr_map);
+ }
+
+ if (cpu_is_pxa310())
+ mfp_init_addr(pxa310_mfp_addr_map);
+
+ return 0;
+}
+
+core_initcall(pxa300_init);
diff --git a/arch/arm/mach-pxa/pxa300.h b/arch/arm/mach-pxa/pxa300.h
new file mode 100644
index 0000000..d02a8d1
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa300.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_PXA300_H
+#define __MACH_PXA300_H
+
+#include "pxa3xx.h"
+#include "mfp-pxa300.h"
+
+#endif /* __MACH_PXA300_H */
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
new file mode 100644
index 0000000..a26eec5
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -0,0 +1,90 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa320.c
+ *
+ * Code specific to PXA320
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include "pxa320.h"
+
+#include "generic.h"
+#include "devices.h"
+
+static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
+
+ MFP_ADDR_X(GPIO0, GPIO4, 0x0124),
+ MFP_ADDR_X(GPIO5, GPIO9, 0x028C),
+ MFP_ADDR(GPIO10, 0x0458),
+ MFP_ADDR_X(GPIO11, GPIO26, 0x02A0),
+ MFP_ADDR_X(GPIO27, GPIO48, 0x0400),
+ MFP_ADDR_X(GPIO49, GPIO62, 0x045C),
+ MFP_ADDR_X(GPIO63, GPIO73, 0x04B4),
+ MFP_ADDR_X(GPIO74, GPIO98, 0x04F0),
+ MFP_ADDR_X(GPIO99, GPIO127, 0x0600),
+ MFP_ADDR_X(GPIO0_2, GPIO5_2, 0x0674),
+ MFP_ADDR_X(GPIO6_2, GPIO13_2, 0x0494),
+ MFP_ADDR_X(GPIO14_2, GPIO17_2, 0x04E0),
+
+ MFP_ADDR(nXCVREN, 0x0138),
+ MFP_ADDR(DF_CLE_nOE, 0x0204),
+ MFP_ADDR(DF_nADV1_ALE, 0x0208),
+ MFP_ADDR(DF_SCLK_S, 0x020C),
+ MFP_ADDR(DF_SCLK_E, 0x0210),
+ MFP_ADDR(nBE0, 0x0214),
+ MFP_ADDR(nBE1, 0x0218),
+ MFP_ADDR(DF_nADV2_ALE, 0x021C),
+ MFP_ADDR(DF_INT_RnB, 0x0220),
+ MFP_ADDR(DF_nCS0, 0x0224),
+ MFP_ADDR(DF_nCS1, 0x0228),
+ MFP_ADDR(DF_nWE, 0x022C),
+ MFP_ADDR(DF_nRE_nOE, 0x0230),
+ MFP_ADDR(nLUA, 0x0234),
+ MFP_ADDR(nLLA, 0x0238),
+ MFP_ADDR(DF_ADDR0, 0x023C),
+ MFP_ADDR(DF_ADDR1, 0x0240),
+ MFP_ADDR(DF_ADDR2, 0x0244),
+ MFP_ADDR(DF_ADDR3, 0x0248),
+ MFP_ADDR(DF_IO0, 0x024C),
+ MFP_ADDR(DF_IO8, 0x0250),
+ MFP_ADDR(DF_IO1, 0x0254),
+ MFP_ADDR(DF_IO9, 0x0258),
+ MFP_ADDR(DF_IO2, 0x025C),
+ MFP_ADDR(DF_IO10, 0x0260),
+ MFP_ADDR(DF_IO3, 0x0264),
+ MFP_ADDR(DF_IO11, 0x0268),
+ MFP_ADDR(DF_IO4, 0x026C),
+ MFP_ADDR(DF_IO12, 0x0270),
+ MFP_ADDR(DF_IO5, 0x0274),
+ MFP_ADDR(DF_IO13, 0x0278),
+ MFP_ADDR(DF_IO6, 0x027C),
+ MFP_ADDR(DF_IO14, 0x0280),
+ MFP_ADDR(DF_IO7, 0x0284),
+ MFP_ADDR(DF_IO15, 0x0288),
+
+ MFP_ADDR_END,
+};
+
+static int __init pxa320_init(void)
+{
+ if (cpu_is_pxa320()) {
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa320_mfp_addr_map);
+ }
+
+ return 0;
+}
+
+core_initcall(pxa320_init);
diff --git a/arch/arm/mach-pxa/pxa320.h b/arch/arm/mach-pxa/pxa320.h
new file mode 100644
index 0000000..c701e3f
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa320.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_PXA320_H
+#define __MACH_PXA320_H
+
+#include "pxa3xx.h"
+#include "mfp-pxa320.h"
+
+#endif /* __MACH_PXA320_H */
+
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
new file mode 100644
index 0000000..b3e2016
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -0,0 +1,388 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
+ *
+ * code specific to pxa3xx aka Monahans
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
+ * initial version: pxa310 USB Host mode support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+
+#include <mach/hardware.h>
+#include "regs-u2d.h"
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+
+struct pxa3xx_u2d_ulpi {
+ struct clk *clk;
+ void __iomem *mmio_base;
+
+ struct usb_phy *otg;
+ unsigned int ulpi_mode;
+};
+
+static struct pxa3xx_u2d_ulpi *u2d;
+
+static inline u32 u2d_readl(u32 reg)
+{
+ return __raw_readl(u2d->mmio_base + reg);
+}
+
+static inline void u2d_writel(u32 reg, u32 val)
+{
+ __raw_writel(val, u2d->mmio_base + reg);
+}
+
+#if defined(CONFIG_PXA310_ULPI)
+enum u2d_ulpi_phy_mode {
+ SYNCH = 0,
+ CARKIT = (1 << 0),
+ SER_3PIN = (1 << 1),
+ SER_6PIN = (1 << 2),
+ LOWPOWER = (1 << 3),
+};
+
+static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
+{
+ return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
+}
+
+static int pxa310_ulpi_poll(void)
+{
+ int timeout = 50000;
+
+ while (timeout--) {
+ if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
+ return 0;
+
+ cpu_relax();
+ }
+
+ pr_warn("%s: ULPI access timed out!\n", __func__);
+
+ return -ETIMEDOUT;
+}
+
+static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
+{
+ int err;
+
+ if (pxa310_ulpi_get_phymode() != SYNCH) {
+ pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
+ return -EBUSY;
+ }
+
+ u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
+ msleep(5);
+
+ err = pxa310_ulpi_poll();
+ if (err)
+ return err;
+
+ return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
+}
+
+static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
+{
+ if (pxa310_ulpi_get_phymode() != SYNCH) {
+ pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
+ return -EBUSY;
+ }
+
+ u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
+ msleep(5);
+
+ return pxa310_ulpi_poll();
+}
+
+struct usb_phy_io_ops pxa310_ulpi_access_ops = {
+ .read = pxa310_ulpi_read,
+ .write = pxa310_ulpi_write,
+};
+
+static void pxa310_otg_transceiver_rtsm(void)
+{
+ u32 u2dotgcr;
+
+ /* put PHY to sync mode */
+ u2dotgcr = u2d_readl(U2DOTGCR);
+ u2dotgcr |= U2DOTGCR_RTSM | U2DOTGCR_UTMID;
+ u2d_writel(U2DOTGCR, u2dotgcr);
+ msleep(10);
+
+ /* setup OTG sync mode */
+ u2dotgcr = u2d_readl(U2DOTGCR);
+ u2dotgcr |= U2DOTGCR_ULAF;
+ u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
+ u2d_writel(U2DOTGCR, u2dotgcr);
+}
+
+static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
+{
+ int err;
+
+ pxa310_otg_transceiver_rtsm();
+
+ err = usb_phy_init(u2d->otg);
+ if (err) {
+ pr_err("OTG transceiver init failed");
+ return err;
+ }
+
+ err = otg_set_vbus(u2d->otg->otg, 1);
+ if (err) {
+ pr_err("OTG transceiver VBUS set failed");
+ return err;
+ }
+
+ err = otg_set_host(u2d->otg->otg, host);
+ if (err)
+ pr_err("OTG transceiver Host mode set failed");
+
+ return err;
+}
+
+static int pxa310_start_otg_hc(struct usb_bus *host)
+{
+ u32 u2dotgcr;
+ int err;
+
+ /* disable USB device controller */
+ u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
+ u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
+ u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
+
+ err = pxa310_start_otg_host_transcvr(host);
+ if (err)
+ return err;
+
+ /* set xceiver mode */
+ if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
+ u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
+ else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
+ u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
+
+ /* start OTG host controller */
+ u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
+ u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
+
+ return 0;
+}
+
+static void pxa310_stop_otg_hc(void)
+{
+ pxa310_otg_transceiver_rtsm();
+
+ otg_set_host(u2d->otg->otg, NULL);
+ otg_set_vbus(u2d->otg->otg, 0);
+ usb_phy_shutdown(u2d->otg);
+}
+
+static void pxa310_u2d_setup_otg_hc(void)
+{
+ u32 u2dotgcr;
+
+ u2dotgcr = u2d_readl(U2DOTGCR);
+ u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
+ u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
+ u2d_writel(U2DOTGCR, u2dotgcr);
+ msleep(5);
+ u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
+ msleep(5);
+ u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
+}
+
+static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
+{
+ unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
+
+ if (pdata) {
+ if (pdata->ulpi_mode & ULPI_SER_6PIN)
+ ulpi_mode |= ULPI_IC_6PIN_SERIAL;
+ else if (pdata->ulpi_mode & ULPI_SER_3PIN)
+ ulpi_mode |= ULPI_IC_3PIN_SERIAL;
+ }
+
+ u2d->ulpi_mode = ulpi_mode;
+
+ u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
+ if (!u2d->otg)
+ return -ENOMEM;
+
+ u2d->otg->io_priv = u2d->mmio_base;
+
+ return 0;
+}
+
+static void pxa310_otg_exit(void)
+{
+ kfree(u2d->otg);
+}
+#else
+static inline void pxa310_u2d_setup_otg_hc(void) {}
+static inline int pxa310_start_otg_hc(struct usb_bus *host)
+{
+ return 0;
+}
+static inline void pxa310_stop_otg_hc(void) {}
+static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
+{
+ return 0;
+}
+static inline void pxa310_otg_exit(void) {}
+#endif /* CONFIG_PXA310_ULPI */
+
+int pxa3xx_u2d_start_hc(struct usb_bus *host)
+{
+ int err = 0;
+
+ /* In case the PXA3xx ULPI isn't used, do nothing. */
+ if (!u2d)
+ return 0;
+
+ clk_prepare_enable(u2d->clk);
+
+ if (cpu_is_pxa310()) {
+ pxa310_u2d_setup_otg_hc();
+ err = pxa310_start_otg_hc(host);
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc);
+
+void pxa3xx_u2d_stop_hc(struct usb_bus *host)
+{
+ /* In case the PXA3xx ULPI isn't used, do nothing. */
+ if (!u2d)
+ return;
+
+ if (cpu_is_pxa310())
+ pxa310_stop_otg_hc();
+
+ clk_disable_unprepare(u2d->clk);
+}
+EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
+
+static int pxa3xx_u2d_probe(struct platform_device *pdev)
+{
+ struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
+ struct resource *r;
+ int err;
+
+ u2d = kzalloc(sizeof(*u2d), GFP_KERNEL);
+ if (!u2d)
+ return -ENOMEM;
+
+ u2d->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(u2d->clk)) {
+ dev_err(&pdev->dev, "failed to get u2d clock\n");
+ err = PTR_ERR(u2d->clk);
+ goto err_free_mem;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no IO memory resource defined\n");
+ err = -ENODEV;
+ goto err_put_clk;
+ }
+
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
+ if (!r) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ err = -EBUSY;
+ goto err_put_clk;
+ }
+
+ u2d->mmio_base = ioremap(r->start, resource_size(r));
+ if (!u2d->mmio_base) {
+ dev_err(&pdev->dev, "ioremap() failed\n");
+ err = -ENODEV;
+ goto err_free_res;
+ }
+
+ if (pdata->init) {
+ err = pdata->init(&pdev->dev);
+ if (err)
+ goto err_free_io;
+ }
+
+ /* Only PXA310 U2D has OTG functionality */
+ if (cpu_is_pxa310()) {
+ err = pxa310_otg_init(pdata);
+ if (err)
+ goto err_free_plat;
+ }
+
+ platform_set_drvdata(pdev, u2d);
+
+ return 0;
+
+err_free_plat:
+ if (pdata->exit)
+ pdata->exit(&pdev->dev);
+err_free_io:
+ iounmap(u2d->mmio_base);
+err_free_res:
+ release_mem_region(r->start, resource_size(r));
+err_put_clk:
+ clk_put(u2d->clk);
+err_free_mem:
+ kfree(u2d);
+ return err;
+}
+
+static int pxa3xx_u2d_remove(struct platform_device *pdev)
+{
+ struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
+ struct resource *r;
+
+ if (cpu_is_pxa310()) {
+ pxa310_stop_otg_hc();
+ pxa310_otg_exit();
+ }
+
+ if (pdata->exit)
+ pdata->exit(&pdev->dev);
+
+ platform_set_drvdata(pdev, NULL);
+ iounmap(u2d->mmio_base);
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, resource_size(r));
+
+ clk_put(u2d->clk);
+
+ kfree(u2d);
+
+ return 0;
+}
+
+static struct platform_driver pxa3xx_u2d_ulpi_driver = {
+ .driver = {
+ .name = "pxa3xx-u2d",
+ },
+ .probe = pxa3xx_u2d_probe,
+ .remove = pxa3xx_u2d_remove,
+};
+module_platform_driver(pxa3xx_u2d_ulpi_driver);
+
+MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
+MODULE_AUTHOR("Igor Grinberg");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
new file mode 100644
index 0000000..df9c897
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -0,0 +1,513 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa3xx.c
+ *
+ * code specific to pxa3xx aka Monahans
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ *
+ * 2007-09-02: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio-pxa.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/syscore_ops.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/mmp_dma.h>
+
+#include <asm/mach/map.h>
+#include <asm/suspend.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/reset.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include "pm.h"
+#include <mach/dma.h>
+#include <mach/smemc.h>
+#include <mach/irqs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
+#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
+
+extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
+
+/*
+ * NAND NFC: DFI bus arbitration subset
+ */
+#define NDCR (*(volatile u32 __iomem*)(NAND_VIRT + 0))
+#define NDCR_ND_ARB_EN (1 << 12)
+#define NDCR_ND_ARB_CNTL (1 << 19)
+
+#ifdef CONFIG_PM
+
+#define ISRAM_START 0x5c000000
+#define ISRAM_SIZE SZ_256K
+
+static void __iomem *sram;
+static unsigned long wakeup_src;
+
+/*
+ * Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic
+ * memory controller has to be reinitialised, so we place some code
+ * in the SRAM to perform this function.
+ *
+ * We disable FIQs across the standby - otherwise, we might receive a
+ * FIQ while the SDRAM is unavailable.
+ */
+static void pxa3xx_cpu_standby(unsigned int pwrmode)
+{
+ void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
+
+ memcpy_toio(sram + 0x8000, pm_enter_standby_start,
+ pm_enter_standby_end - pm_enter_standby_start);
+
+ AD2D0SR = ~0;
+ AD2D1SR = ~0;
+ AD2D0ER = wakeup_src;
+ AD2D1ER = 0;
+ ASCR = ASCR;
+ ARSR = ARSR;
+
+ local_fiq_disable();
+ fn(pwrmode);
+ local_fiq_enable();
+
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+}
+
+/*
+ * NOTE: currently, the OBM (OEM Boot Module) binary comes along with
+ * PXA3xx development kits assumes that the resuming process continues
+ * with the address stored within the first 4 bytes of SDRAM. The PSPR
+ * register is used privately by BootROM and OBM, and _must_ be set to
+ * 0x5c014000 for the moment.
+ */
+static void pxa3xx_cpu_pm_suspend(void)
+{
+ volatile unsigned long *p = (volatile void *)0xc0000000;
+ unsigned long saved_data = *p;
+#ifndef CONFIG_IWMMXT
+ u64 acc0;
+
+ asm volatile(".arch_extension xscale\n\t"
+ "mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
+
+ /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
+ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
+ CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
+
+ /* clear and setup wakeup source */
+ AD3SR = ~0;
+ AD3ER = wakeup_src;
+ ASCR = ASCR;
+ ARSR = ARSR;
+
+ PCFR |= (1u << 13); /* L1_DIS */
+ PCFR &= ~((1u << 12) | (1u << 1)); /* L0_EN | SL_ROD */
+
+ PSPR = 0x5c014000;
+
+ /* overwrite with the resume address */
+ *p = __pa_symbol(cpu_resume);
+
+ cpu_suspend(0, pxa3xx_finish_suspend);
+
+ *p = saved_data;
+
+ AD3ER = 0;
+
+#ifndef CONFIG_IWMMXT
+ asm volatile(".arch_extension xscale\n\t"
+ "mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
+}
+
+static void pxa3xx_cpu_pm_enter(suspend_state_t state)
+{
+ /*
+ * Don't sleep if no wakeup sources are defined
+ */
+ if (wakeup_src == 0) {
+ printk(KERN_ERR "Not suspending: no wakeup sources\n");
+ return;
+ }
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
+ break;
+
+ case PM_SUSPEND_MEM:
+ pxa3xx_cpu_pm_suspend();
+ break;
+ }
+}
+
+static int pxa3xx_cpu_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
+ .valid = pxa3xx_cpu_pm_valid,
+ .enter = pxa3xx_cpu_pm_enter,
+};
+
+static void __init pxa3xx_init_pm(void)
+{
+ sram = ioremap(ISRAM_START, ISRAM_SIZE);
+ if (!sram) {
+ printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
+ return;
+ }
+
+ /*
+ * Since we copy wakeup code into the SRAM, we need to ensure
+ * that it is preserved over the low power modes. Note: bit 8
+ * is undocumented in the developer manual, but must be set.
+ */
+ AD1R |= ADXR_L2 | ADXR_R0;
+ AD2R |= ADXR_L2 | ADXR_R0;
+ AD3R |= ADXR_L2 | ADXR_R0;
+
+ /*
+ * Clear the resume enable registers.
+ */
+ AD1D0ER = 0;
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+ AD3ER = 0;
+
+ pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
+}
+
+static int pxa3xx_set_wake(struct irq_data *d, unsigned int on)
+{
+ unsigned long flags, mask = 0;
+
+ switch (d->irq) {
+ case IRQ_SSP3:
+ mask = ADXER_MFP_WSSP3;
+ break;
+ case IRQ_MSL:
+ mask = ADXER_WMSL0;
+ break;
+ case IRQ_USBH2:
+ case IRQ_USBH1:
+ mask = ADXER_WUSBH;
+ break;
+ case IRQ_KEYPAD:
+ mask = ADXER_WKP;
+ break;
+ case IRQ_AC97:
+ mask = ADXER_MFP_WAC97;
+ break;
+ case IRQ_USIM:
+ mask = ADXER_WUSIM0;
+ break;
+ case IRQ_SSP2:
+ mask = ADXER_MFP_WSSP2;
+ break;
+ case IRQ_I2C:
+ mask = ADXER_MFP_WI2C;
+ break;
+ case IRQ_STUART:
+ mask = ADXER_MFP_WUART3;
+ break;
+ case IRQ_BTUART:
+ mask = ADXER_MFP_WUART2;
+ break;
+ case IRQ_FFUART:
+ mask = ADXER_MFP_WUART1;
+ break;
+ case IRQ_MMC:
+ mask = ADXER_MFP_WMMC1;
+ break;
+ case IRQ_SSP:
+ mask = ADXER_MFP_WSSP1;
+ break;
+ case IRQ_RTCAlrm:
+ mask = ADXER_WRTC;
+ break;
+ case IRQ_SSP4:
+ mask = ADXER_MFP_WSSP4;
+ break;
+ case IRQ_TSI:
+ mask = ADXER_WTSI;
+ break;
+ case IRQ_USIM2:
+ mask = ADXER_WUSIM1;
+ break;
+ case IRQ_MMC2:
+ mask = ADXER_MFP_WMMC2;
+ break;
+ case IRQ_NAND:
+ mask = ADXER_MFP_WFLASH;
+ break;
+ case IRQ_USB2:
+ mask = ADXER_WUSB2;
+ break;
+ case IRQ_WAKEUP0:
+ mask = ADXER_WEXTWAKE0;
+ break;
+ case IRQ_WAKEUP1:
+ mask = ADXER_WEXTWAKE1;
+ break;
+ case IRQ_MMC3:
+ mask = ADXER_MFP_GEN12;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ local_irq_save(flags);
+ if (on)
+ wakeup_src |= mask;
+ else
+ wakeup_src &= ~mask;
+ local_irq_restore(flags);
+
+ return 0;
+}
+#else
+static inline void pxa3xx_init_pm(void) {}
+#define pxa3xx_set_wake NULL
+#endif
+
+static void pxa_ack_ext_wakeup(struct irq_data *d)
+{
+ PECR |= PECR_IS(d->irq - IRQ_WAKEUP0);
+}
+
+static void pxa_mask_ext_wakeup(struct irq_data *d)
+{
+ pxa_mask_irq(d);
+ PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0);
+}
+
+static void pxa_unmask_ext_wakeup(struct irq_data *d)
+{
+ pxa_unmask_irq(d);
+ PECR |= PECR_IE(d->irq - IRQ_WAKEUP0);
+}
+
+static int pxa_set_ext_wakeup_type(struct irq_data *d, unsigned int flow_type)
+{
+ if (flow_type & IRQ_TYPE_EDGE_RISING)
+ PWER |= 1 << (d->irq - IRQ_WAKEUP0);
+
+ if (flow_type & IRQ_TYPE_EDGE_FALLING)
+ PWER |= 1 << (d->irq - IRQ_WAKEUP0 + 2);
+
+ return 0;
+}
+
+static struct irq_chip pxa_ext_wakeup_chip = {
+ .name = "WAKEUP",
+ .irq_ack = pxa_ack_ext_wakeup,
+ .irq_mask = pxa_mask_ext_wakeup,
+ .irq_unmask = pxa_unmask_ext_wakeup,
+ .irq_set_type = pxa_set_ext_wakeup_type,
+};
+
+static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
+ unsigned int))
+{
+ int irq;
+
+ for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
+ irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip,
+ handle_edge_irq);
+ irq_clear_status_flags(irq, IRQ_NOREQUEST);
+ }
+
+ pxa_ext_wakeup_chip.irq_set_wake = fn;
+}
+
+static void __init __pxa3xx_init_irq(void)
+{
+ /* enable CP6 access */
+ u32 value;
+ __asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
+ value |= (1 << 6);
+ __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
+
+ pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
+}
+
+void __init pxa3xx_init_irq(void)
+{
+ __pxa3xx_init_irq();
+ pxa_init_irq(56, pxa3xx_set_wake);
+}
+
+#ifdef CONFIG_OF
+static int __init __init
+pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
+{
+ __pxa3xx_init_irq();
+ pxa_dt_irq_init(pxa3xx_set_wake);
+ set_handle_irq(ichp_handle_irq);
+
+ return 0;
+}
+IRQCHIP_DECLARE(pxa3xx_intc, "marvell,pxa-intc", pxa3xx_dt_init_irq);
+#endif /* CONFIG_OF */
+
+static struct map_desc pxa3xx_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = (unsigned long)SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
+ .length = SMEMC_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = (unsigned long)NAND_VIRT,
+ .pfn = __phys_to_pfn(NAND_PHYS),
+ .length = NAND_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+void __init pxa3xx_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
+ pxa3xx_get_clk_frequency_khz(1);
+}
+
+/*
+ * device registration specific to PXA3xx.
+ */
+
+void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_i2c_power, info);
+}
+
+static struct pxa_gpio_platform_data pxa3xx_gpio_pdata = {
+ .irq_base = PXA_GPIO_TO_IRQ(0),
+};
+
+static struct platform_device *devices[] __initdata = {
+ &pxa27x_device_udc,
+ &pxa_device_pmu,
+ &pxa_device_i2s,
+ &pxa_device_asoc_ssp1,
+ &pxa_device_asoc_ssp2,
+ &pxa_device_asoc_ssp3,
+ &pxa_device_asoc_ssp4,
+ &pxa_device_asoc_platform,
+ &pxa_device_rtc,
+ &pxa3xx_device_ssp1,
+ &pxa3xx_device_ssp2,
+ &pxa3xx_device_ssp3,
+ &pxa3xx_device_ssp4,
+ &pxa27x_device_pwm0,
+ &pxa27x_device_pwm1,
+};
+
+static const struct dma_slave_map pxa3xx_slave_map[] = {
+ /* PXA25x, PXA27x and PXA3xx common entries */
+ { "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+ PDMA_FILTER_PARAM(LOWEST, 10) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+ { "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+ { "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+ { "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+ { "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+ { "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+ { "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+ { "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+ { "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+ { "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
+ { "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
+
+ /* PXA3xx specific map */
+ { "pxa-ssp-dai.3", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
+ { "pxa-ssp-dai.3", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
+ { "pxa2xx-mci.1", "rx", PDMA_FILTER_PARAM(LOWEST, 93) },
+ { "pxa2xx-mci.1", "tx", PDMA_FILTER_PARAM(LOWEST, 94) },
+ { "pxa3xx-nand", "data", PDMA_FILTER_PARAM(LOWEST, 97) },
+ { "pxa2xx-mci.2", "rx", PDMA_FILTER_PARAM(LOWEST, 100) },
+ { "pxa2xx-mci.2", "tx", PDMA_FILTER_PARAM(LOWEST, 101) },
+};
+
+static struct mmp_dma_platdata pxa3xx_dma_pdata = {
+ .dma_channels = 32,
+ .nb_requestors = 100,
+ .slave_map = pxa3xx_slave_map,
+ .slave_map_cnt = ARRAY_SIZE(pxa3xx_slave_map),
+};
+
+static int __init pxa3xx_init(void)
+{
+ int ret = 0;
+
+ if (cpu_is_pxa3xx()) {
+
+ reset_status = ARSR;
+
+ /*
+ * clear RDH bit every time after reset
+ *
+ * Note: the last 3 bits DxS are write-1-to-clear so carefully
+ * preserve them here in case they will be referenced later
+ */
+ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
+
+ /*
+ * Disable DFI bus arbitration, to prevent a system bus lock if
+ * somebody disables the NAND clock (unused clock) while this
+ * bit remains set.
+ */
+ NDCR = (NDCR & ~NDCR_ND_ARB_EN) | NDCR_ND_ARB_CNTL;
+
+ pxa3xx_init_pm();
+
+ enable_irq_wake(IRQ_WAKEUP0);
+ if (cpu_is_pxa320())
+ enable_irq_wake(IRQ_WAKEUP1);
+
+ register_syscore_ops(&pxa_irq_syscore_ops);
+ register_syscore_ops(&pxa3xx_mfp_syscore_ops);
+
+ if (of_have_populated_dt())
+ return 0;
+
+ pxa2xx_set_dmac_info(&pxa3xx_dma_pdata);
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (ret)
+ return ret;
+ if (cpu_is_pxa300() || cpu_is_pxa310() || cpu_is_pxa320()) {
+ platform_device_add_data(&pxa3xx_device_gpio,
+ &pxa3xx_gpio_pdata,
+ sizeof(pxa3xx_gpio_pdata));
+ ret = platform_device_register(&pxa3xx_device_gpio);
+ }
+ }
+
+ return ret;
+}
+
+postcore_initcall(pxa3xx_init);
diff --git a/arch/arm/mach-pxa/pxa3xx.h b/arch/arm/mach-pxa/pxa3xx.h
new file mode 100644
index 0000000..6d4502a
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa3xx.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_PXA3XX_H
+#define __MACH_PXA3XX_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/irqs.h>
+
+#endif /* __MACH_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
new file mode 100644
index 0000000..da912be
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -0,0 +1,219 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa930.c
+ *
+ * Code specific to PXA930
+ *
+ * Copyright (C) 2007-2008 Marvell Internation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/gpio-pxa.h>
+#include <linux/platform_device.h>
+
+#include "pxa930.h"
+
+#include "devices.h"
+
+static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+
+ MFP_ADDR(GPIO0, 0x02e0),
+ MFP_ADDR(GPIO1, 0x02dc),
+ MFP_ADDR(GPIO2, 0x02e8),
+ MFP_ADDR(GPIO3, 0x02d8),
+ MFP_ADDR(GPIO4, 0x02e4),
+ MFP_ADDR(GPIO5, 0x02ec),
+ MFP_ADDR(GPIO6, 0x02f8),
+ MFP_ADDR(GPIO7, 0x02fc),
+ MFP_ADDR(GPIO8, 0x0300),
+ MFP_ADDR(GPIO9, 0x02d4),
+ MFP_ADDR(GPIO10, 0x02f4),
+ MFP_ADDR(GPIO11, 0x02f0),
+ MFP_ADDR(GPIO12, 0x0304),
+ MFP_ADDR(GPIO13, 0x0310),
+ MFP_ADDR(GPIO14, 0x0308),
+ MFP_ADDR(GPIO15, 0x030c),
+ MFP_ADDR(GPIO16, 0x04e8),
+ MFP_ADDR(GPIO17, 0x04f4),
+ MFP_ADDR(GPIO18, 0x04f8),
+ MFP_ADDR(GPIO19, 0x04fc),
+ MFP_ADDR(GPIO20, 0x0518),
+ MFP_ADDR(GPIO21, 0x051c),
+ MFP_ADDR(GPIO22, 0x04ec),
+ MFP_ADDR(GPIO23, 0x0500),
+ MFP_ADDR(GPIO24, 0x04f0),
+ MFP_ADDR(GPIO25, 0x0504),
+ MFP_ADDR(GPIO26, 0x0510),
+ MFP_ADDR(GPIO27, 0x0514),
+ MFP_ADDR(GPIO28, 0x0520),
+ MFP_ADDR(GPIO29, 0x0600),
+ MFP_ADDR(GPIO30, 0x0618),
+ MFP_ADDR(GPIO31, 0x0610),
+ MFP_ADDR(GPIO32, 0x060c),
+ MFP_ADDR(GPIO33, 0x061c),
+ MFP_ADDR(GPIO34, 0x0620),
+ MFP_ADDR(GPIO35, 0x0628),
+ MFP_ADDR(GPIO36, 0x062c),
+ MFP_ADDR(GPIO37, 0x0630),
+ MFP_ADDR(GPIO38, 0x0634),
+ MFP_ADDR(GPIO39, 0x0638),
+ MFP_ADDR(GPIO40, 0x063c),
+ MFP_ADDR(GPIO41, 0x0614),
+ MFP_ADDR(GPIO42, 0x0624),
+ MFP_ADDR(GPIO43, 0x0608),
+ MFP_ADDR(GPIO44, 0x0604),
+ MFP_ADDR(GPIO45, 0x050c),
+ MFP_ADDR(GPIO46, 0x0508),
+ MFP_ADDR(GPIO47, 0x02bc),
+ MFP_ADDR(GPIO48, 0x02b4),
+ MFP_ADDR(GPIO49, 0x02b8),
+ MFP_ADDR(GPIO50, 0x02c8),
+ MFP_ADDR(GPIO51, 0x02c0),
+ MFP_ADDR(GPIO52, 0x02c4),
+ MFP_ADDR(GPIO53, 0x02d0),
+ MFP_ADDR(GPIO54, 0x02cc),
+ MFP_ADDR(GPIO55, 0x029c),
+ MFP_ADDR(GPIO56, 0x02a0),
+ MFP_ADDR(GPIO57, 0x0294),
+ MFP_ADDR(GPIO58, 0x0298),
+ MFP_ADDR(GPIO59, 0x02a4),
+ MFP_ADDR(GPIO60, 0x02a8),
+ MFP_ADDR(GPIO61, 0x02b0),
+ MFP_ADDR(GPIO62, 0x02ac),
+ MFP_ADDR(GPIO63, 0x0640),
+ MFP_ADDR(GPIO64, 0x065c),
+ MFP_ADDR(GPIO65, 0x0648),
+ MFP_ADDR(GPIO66, 0x0644),
+ MFP_ADDR(GPIO67, 0x0674),
+ MFP_ADDR(GPIO68, 0x0658),
+ MFP_ADDR(GPIO69, 0x0654),
+ MFP_ADDR(GPIO70, 0x0660),
+ MFP_ADDR(GPIO71, 0x0668),
+ MFP_ADDR(GPIO72, 0x0664),
+ MFP_ADDR(GPIO73, 0x0650),
+ MFP_ADDR(GPIO74, 0x066c),
+ MFP_ADDR(GPIO75, 0x064c),
+ MFP_ADDR(GPIO76, 0x0670),
+ MFP_ADDR(GPIO77, 0x0678),
+ MFP_ADDR(GPIO78, 0x067c),
+ MFP_ADDR(GPIO79, 0x0694),
+ MFP_ADDR(GPIO80, 0x069c),
+ MFP_ADDR(GPIO81, 0x06a0),
+ MFP_ADDR(GPIO82, 0x06a4),
+ MFP_ADDR(GPIO83, 0x0698),
+ MFP_ADDR(GPIO84, 0x06bc),
+ MFP_ADDR(GPIO85, 0x06b4),
+ MFP_ADDR(GPIO86, 0x06b0),
+ MFP_ADDR(GPIO87, 0x06c0),
+ MFP_ADDR(GPIO88, 0x06c4),
+ MFP_ADDR(GPIO89, 0x06ac),
+ MFP_ADDR(GPIO90, 0x0680),
+ MFP_ADDR(GPIO91, 0x0684),
+ MFP_ADDR(GPIO92, 0x0688),
+ MFP_ADDR(GPIO93, 0x0690),
+ MFP_ADDR(GPIO94, 0x068c),
+ MFP_ADDR(GPIO95, 0x06a8),
+ MFP_ADDR(GPIO96, 0x06b8),
+ MFP_ADDR(GPIO97, 0x0410),
+ MFP_ADDR(GPIO98, 0x0418),
+ MFP_ADDR(GPIO99, 0x041c),
+ MFP_ADDR(GPIO100, 0x0414),
+ MFP_ADDR(GPIO101, 0x0408),
+ MFP_ADDR(GPIO102, 0x0324),
+ MFP_ADDR(GPIO103, 0x040c),
+ MFP_ADDR(GPIO104, 0x0400),
+ MFP_ADDR(GPIO105, 0x0328),
+ MFP_ADDR(GPIO106, 0x0404),
+
+ MFP_ADDR(nXCVREN, 0x0204),
+ MFP_ADDR(DF_CLE_nOE, 0x020c),
+ MFP_ADDR(DF_nADV1_ALE, 0x0218),
+ MFP_ADDR(DF_SCLK_E, 0x0214),
+ MFP_ADDR(DF_SCLK_S, 0x0210),
+ MFP_ADDR(nBE0, 0x021c),
+ MFP_ADDR(nBE1, 0x0220),
+ MFP_ADDR(DF_nADV2_ALE, 0x0224),
+ MFP_ADDR(DF_INT_RnB, 0x0228),
+ MFP_ADDR(DF_nCS0, 0x022c),
+ MFP_ADDR(DF_nCS1, 0x0230),
+ MFP_ADDR(nLUA, 0x0254),
+ MFP_ADDR(nLLA, 0x0258),
+ MFP_ADDR(DF_nWE, 0x0234),
+ MFP_ADDR(DF_nRE_nOE, 0x0238),
+ MFP_ADDR(DF_ADDR0, 0x024c),
+ MFP_ADDR(DF_ADDR1, 0x0250),
+ MFP_ADDR(DF_ADDR2, 0x025c),
+ MFP_ADDR(DF_ADDR3, 0x0260),
+ MFP_ADDR(DF_IO0, 0x023c),
+ MFP_ADDR(DF_IO1, 0x0240),
+ MFP_ADDR(DF_IO2, 0x0244),
+ MFP_ADDR(DF_IO3, 0x0248),
+ MFP_ADDR(DF_IO4, 0x0264),
+ MFP_ADDR(DF_IO5, 0x0268),
+ MFP_ADDR(DF_IO6, 0x026c),
+ MFP_ADDR(DF_IO7, 0x0270),
+ MFP_ADDR(DF_IO8, 0x0274),
+ MFP_ADDR(DF_IO9, 0x0278),
+ MFP_ADDR(DF_IO10, 0x027c),
+ MFP_ADDR(DF_IO11, 0x0280),
+ MFP_ADDR(DF_IO12, 0x0284),
+ MFP_ADDR(DF_IO13, 0x0288),
+ MFP_ADDR(DF_IO14, 0x028c),
+ MFP_ADDR(DF_IO15, 0x0290),
+
+ MFP_ADDR(GSIM_UIO, 0x0314),
+ MFP_ADDR(GSIM_UCLK, 0x0318),
+ MFP_ADDR(GSIM_UDET, 0x031c),
+ MFP_ADDR(GSIM_nURST, 0x0320),
+
+ MFP_ADDR(PMIC_INT, 0x06c8),
+
+ MFP_ADDR(RDY, 0x0200),
+
+ MFP_ADDR_END,
+};
+
+static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
+ MFP_ADDR(GPIO159, 0x0524),
+ MFP_ADDR(GPIO163, 0x0534),
+ MFP_ADDR(GPIO167, 0x0544),
+ MFP_ADDR(GPIO168, 0x0548),
+ MFP_ADDR(GPIO169, 0x054c),
+ MFP_ADDR(GPIO170, 0x0550),
+ MFP_ADDR(GPIO171, 0x0554),
+ MFP_ADDR(GPIO172, 0x0558),
+ MFP_ADDR(GPIO173, 0x055c),
+
+ MFP_ADDR_END,
+};
+
+static struct pxa_gpio_platform_data pxa93x_gpio_pdata = {
+ .irq_base = PXA_GPIO_TO_IRQ(0),
+};
+
+static int __init pxa930_init(void)
+{
+ int ret = 0;
+
+ if (cpu_is_pxa93x()) {
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa930_mfp_addr_map);
+ platform_device_add_data(&pxa93x_device_gpio,
+ &pxa93x_gpio_pdata,
+ sizeof(pxa93x_gpio_pdata));
+ ret = platform_device_register(&pxa93x_device_gpio);
+ }
+
+ if (cpu_is_pxa935())
+ mfp_init_addr(pxa935_mfp_addr_map);
+
+ return 0;
+}
+
+core_initcall(pxa930_init);
diff --git a/arch/arm/mach-pxa/pxa930.h b/arch/arm/mach-pxa/pxa930.h
new file mode 100644
index 0000000..bbf25c0
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa930.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_PXA930_H
+#define __MACH_PXA930_H
+
+#include "pxa3xx.h"
+#include "mfp-pxa930.h"
+
+#endif /* __MACH_PXA930_H */
diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
new file mode 100644
index 0000000..9415085
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c
@@ -0,0 +1,203 @@
+/*
+ * Intel Reference Systems cplds
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Cplds motherboard driver, supporting lubbock and mainstone SoC board.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#define FPGA_IRQ_MASK_EN 0x0
+#define FPGA_IRQ_SET_CLR 0x10
+
+#define CPLDS_NB_IRQ 32
+
+struct cplds {
+ void __iomem *base;
+ int irq;
+ unsigned int irq_mask;
+ struct gpio_desc *gpio0;
+ struct irq_domain *irqdomain;
+};
+
+static irqreturn_t cplds_irq_handler(int in_irq, void *d)
+{
+ struct cplds *fpga = d;
+ unsigned long pending;
+ unsigned int bit;
+
+ do {
+ pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+ for_each_set_bit(bit, &pending, CPLDS_NB_IRQ) {
+ generic_handle_irq(irq_find_mapping(fpga->irqdomain,
+ bit));
+ }
+ } while (pending);
+
+ return IRQ_HANDLED;
+}
+
+static void cplds_irq_mask(struct irq_data *d)
+{
+ struct cplds *fpga = irq_data_get_irq_chip_data(d);
+ unsigned int cplds_irq = irqd_to_hwirq(d);
+ unsigned int bit = BIT(cplds_irq);
+
+ fpga->irq_mask &= ~bit;
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+}
+
+static void cplds_irq_unmask(struct irq_data *d)
+{
+ struct cplds *fpga = irq_data_get_irq_chip_data(d);
+ unsigned int cplds_irq = irqd_to_hwirq(d);
+ unsigned int set, bit = BIT(cplds_irq);
+
+ set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+ writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
+
+ fpga->irq_mask |= bit;
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+}
+
+static struct irq_chip cplds_irq_chip = {
+ .name = "pxa_cplds",
+ .irq_ack = cplds_irq_mask,
+ .irq_mask = cplds_irq_mask,
+ .irq_unmask = cplds_irq_unmask,
+ .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct cplds *fpga = d->host_data;
+
+ irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, fpga);
+
+ return 0;
+}
+
+static const struct irq_domain_ops cplds_irq_domain_ops = {
+ .xlate = irq_domain_xlate_twocell,
+ .map = cplds_irq_domain_map,
+};
+
+static int cplds_resume(struct platform_device *pdev)
+{
+ struct cplds *fpga = platform_get_drvdata(pdev);
+
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+
+ return 0;
+}
+
+static int cplds_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct cplds *fpga;
+ int ret;
+ int base_irq;
+ unsigned long irqflags = 0;
+
+ fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
+ if (!fpga)
+ return -ENOMEM;
+
+ fpga->irq = platform_get_irq(pdev, 0);
+ if (fpga->irq <= 0)
+ return fpga->irq;
+
+ base_irq = platform_get_irq(pdev, 1);
+ if (base_irq < 0)
+ base_irq = 0;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ fpga->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fpga->base))
+ return PTR_ERR(fpga->base);
+
+ platform_set_drvdata(pdev, fpga);
+
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+ writel(0, fpga->base + FPGA_IRQ_SET_CLR);
+
+ irqflags = irq_get_trigger_type(fpga->irq);
+ ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
+ irqflags, dev_name(&pdev->dev), fpga);
+ if (ret == -ENOSYS)
+ return -EPROBE_DEFER;
+
+ if (ret) {
+ dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
+ fpga->irq, ret);
+ return ret;
+ }
+
+ irq_set_irq_wake(fpga->irq, 1);
+ fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
+ CPLDS_NB_IRQ,
+ &cplds_irq_domain_ops, fpga);
+ if (!fpga->irqdomain)
+ return -ENODEV;
+
+ if (base_irq) {
+ ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0,
+ CPLDS_NB_IRQ);
+ if (ret) {
+ dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n",
+ base_irq, base_irq + CPLDS_NB_IRQ);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int cplds_remove(struct platform_device *pdev)
+{
+ struct cplds *fpga = platform_get_drvdata(pdev);
+
+ irq_set_chip_and_handler(fpga->irq, NULL, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id cplds_id_table[] = {
+ { .compatible = "intel,lubbock-cplds-irqs", },
+ { .compatible = "intel,mainstone-cplds-irqs", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cplds_id_table);
+
+static struct platform_driver cplds_driver = {
+ .driver = {
+ .name = "pxa_cplds_irqs",
+ .of_match_table = of_match_ptr(cplds_id_table),
+ },
+ .probe = cplds_probe,
+ .remove = cplds_remove,
+ .resume = cplds_resume,
+};
+
+module_platform_driver(cplds_driver);
+
+MODULE_DESCRIPTION("PXA Cplds interrupts driver");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
new file mode 100644
index 0000000..0343455
--- /dev/null
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -0,0 +1,1182 @@
+/*
+ * arch/arm/mach-pxa/raumfeld.c
+ *
+ * Support for the following Raumfeld devices:
+ *
+ * * Controller
+ * * Connector
+ * * Speaker S/M
+ *
+ * See http://www.raumfeld.com for details.
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/property.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/w1-gpio.h>
+#include <linux/sched.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/lis3lv02d.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/regulator/max8660.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+
+#include <asm/system_info.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa300.h"
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/* common GPIO definitions */
+
+/* inputs */
+#define GPIO_ON_OFF (14)
+#define GPIO_VOLENC_A (19)
+#define GPIO_VOLENC_B (20)
+#define GPIO_CHARGE_DONE (23)
+#define GPIO_CHARGE_IND (27)
+#define GPIO_TOUCH_IRQ (32)
+#define GPIO_ETH_IRQ (40)
+#define GPIO_SPI_MISO (98)
+#define GPIO_ACCEL_IRQ (104)
+#define GPIO_RESCUE_BOOT (115)
+#define GPIO_DOCK_DETECT (116)
+#define GPIO_KEY1 (117)
+#define GPIO_KEY2 (118)
+#define GPIO_KEY3 (119)
+#define GPIO_CHARGE_USB_OK (112)
+#define GPIO_CHARGE_DC_OK (101)
+#define GPIO_CHARGE_USB_SUSP (102)
+
+/* outputs */
+#define GPIO_SHUTDOWN_SUPPLY (16)
+#define GPIO_SHUTDOWN_BATT (18)
+#define GPIO_CHRG_PEN2 (31)
+#define GPIO_TFT_VA_EN (33)
+#define GPIO_SPDIF_CS (34)
+#define GPIO_LED2 (35)
+#define GPIO_LED1 (36)
+#define GPIO_SPDIF_RESET (38)
+#define GPIO_SPI_CLK (95)
+#define GPIO_MCLK_DAC_CS (96)
+#define GPIO_SPI_MOSI (97)
+#define GPIO_W1_PULLUP_ENABLE (105)
+#define GPIO_DISPLAY_ENABLE (106)
+#define GPIO_MCLK_RESET (111)
+#define GPIO_W2W_RESET (113)
+#define GPIO_W2W_PDN (114)
+#define GPIO_CODEC_RESET (120)
+#define GPIO_AUDIO_VA_ENABLE (124)
+#define GPIO_ACCEL_CS (125)
+#define GPIO_ONE_WIRE (126)
+
+/*
+ * GPIO configurations
+ */
+static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO77_UART1_RXD,
+ GPIO78_UART1_TXD,
+ GPIO79_UART1_CTS,
+ GPIO81_UART1_DSR,
+ GPIO83_UART1_DTR,
+ GPIO84_UART1_RTS,
+
+ /* UART3 */
+ GPIO110_UART3_RXD,
+
+ /* USB Host */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+
+ /* I2C */
+ GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+ GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+ /* SPI */
+ GPIO34_GPIO, /* SPDIF_CS */
+ GPIO96_GPIO, /* MCLK_CS */
+ GPIO125_GPIO, /* ACCEL_CS */
+
+ /* MMC */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD,
+
+ /* One-wire */
+ GPIO126_GPIO | MFP_LPM_FLOAT,
+ GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
+
+ /* CHRG_USB_OK */
+ GPIO101_GPIO | MFP_PULL_HIGH,
+ /* CHRG_USB_OK */
+ GPIO112_GPIO | MFP_PULL_HIGH,
+ /* CHRG_USB_SUSP */
+ GPIO102_GPIO,
+ /* DISPLAY_ENABLE */
+ GPIO106_GPIO,
+ /* DOCK_DETECT */
+ GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+ /* LCD */
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+};
+
+static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO77_UART1_RXD,
+ GPIO78_UART1_TXD,
+ GPIO79_UART1_CTS,
+ GPIO81_UART1_DSR,
+ GPIO83_UART1_DTR,
+ GPIO84_UART1_RTS,
+
+ /* UART3 */
+ GPIO110_UART3_RXD,
+
+ /* USB Host */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+
+ /* I2C */
+ GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+ GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+ /* SPI */
+ GPIO34_GPIO, /* SPDIF_CS */
+ GPIO96_GPIO, /* MCLK_CS */
+ GPIO125_GPIO, /* ACCEL_CS */
+
+ /* MMC */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD,
+
+ /* Ethernet */
+ GPIO1_nCS2, /* CS */
+ GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */
+
+ /* SSP for I2S */
+ GPIO85_SSP1_SCLK,
+ GPIO89_SSP1_EXTCLK,
+ GPIO86_SSP1_FRM,
+ GPIO87_SSP1_TXD,
+ GPIO88_SSP1_RXD,
+ GPIO90_SSP1_SYSCLK,
+
+ /* SSP2 for S/PDIF */
+ GPIO25_SSP2_SCLK,
+ GPIO26_SSP2_FRM,
+ GPIO27_SSP2_TXD,
+ GPIO29_SSP2_EXTCLK,
+
+ /* LEDs */
+ GPIO35_GPIO | MFP_LPM_PULL_LOW,
+ GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO77_UART1_RXD,
+ GPIO78_UART1_TXD,
+ GPIO79_UART1_CTS,
+ GPIO81_UART1_DSR,
+ GPIO83_UART1_DTR,
+ GPIO84_UART1_RTS,
+
+ /* UART3 */
+ GPIO110_UART3_RXD,
+
+ /* USB Host */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+
+ /* I2C */
+ GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+ GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+ /* SPI */
+ GPIO34_GPIO, /* SPDIF_CS */
+ GPIO96_GPIO, /* MCLK_CS */
+ GPIO125_GPIO, /* ACCEL_CS */
+
+ /* MMC */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD,
+
+ /* Ethernet */
+ GPIO1_nCS2, /* CS */
+ GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */
+
+ /* SSP for I2S */
+ GPIO85_SSP1_SCLK,
+ GPIO89_SSP1_EXTCLK,
+ GPIO86_SSP1_FRM,
+ GPIO87_SSP1_TXD,
+ GPIO88_SSP1_RXD,
+ GPIO90_SSP1_SYSCLK,
+
+ /* LEDs */
+ GPIO35_GPIO | MFP_LPM_PULL_LOW,
+ GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+/*
+ * SMSC LAN9220 Ethernet
+ */
+
+static struct resource smc91x_resources[] = {
+ {
+ .start = PXA3xx_CS2_PHYS,
+ .end = PXA3xx_CS2_PHYS + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+ }
+};
+
+static struct smsc911x_platform_config raumfeld_smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &raumfeld_smsc911x_config,
+ }
+};
+
+/**
+ * NAND
+ */
+
+static struct mtd_partition raumfeld_nand_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0,
+ .size = 0xa0000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "BootloaderEnvironment",
+ .offset = 0xa0000,
+ .size = 0x20000,
+ },
+ {
+ .name = "BootloaderSplashScreen",
+ .offset = 0xc0000,
+ .size = 0x60000,
+ },
+ {
+ .name = "UBI",
+ .offset = 0x120000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
+ .keep_config = 1,
+ .parts = raumfeld_nand_partitions,
+ .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions),
+};
+
+/**
+ * USB (OHCI) support
+ */
+
+static struct pxaohci_platform_data raumfeld_ohci_info = {
+ .port_mode = PMM_GLOBAL_MODE,
+ .flags = ENABLE_PORT1,
+};
+
+/**
+ * Rotary encoder input device
+ */
+
+static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
+ .dev_id = "rotary-encoder.0",
+ .table = {
+ GPIO_LOOKUP_IDX("gpio-0",
+ GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-0",
+ GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static const struct property_entry raumfeld_rotary_properties[] __initconst = {
+ PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
+ PROPERTY_ENTRY_U32("linux,axis", REL_X),
+ PROPERTY_ENTRY_U32("rotary-encoder,relative_axis", 1),
+ { },
+};
+
+static struct platform_device rotary_encoder_device = {
+ .name = "rotary-encoder",
+ .id = 0,
+};
+
+/**
+ * GPIO buttons
+ */
+
+static struct gpio_keys_button gpio_keys_button[] = {
+ {
+ .code = KEY_F1,
+ .type = EV_KEY,
+ .gpio = GPIO_KEY1,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "Button 1",
+ },
+ {
+ .code = KEY_F2,
+ .type = EV_KEY,
+ .gpio = GPIO_KEY2,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "Button 2",
+ },
+ {
+ .code = KEY_F3,
+ .type = EV_KEY,
+ .gpio = GPIO_KEY3,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "Button 3",
+ },
+ {
+ .code = KEY_F4,
+ .type = EV_KEY,
+ .gpio = GPIO_RESCUE_BOOT,
+ .active_low = 0,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "rescue boot button",
+ },
+ {
+ .code = KEY_F5,
+ .type = EV_KEY,
+ .gpio = GPIO_DOCK_DETECT,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "dock detect",
+ },
+ {
+ .code = KEY_F6,
+ .type = EV_KEY,
+ .gpio = GPIO_ON_OFF,
+ .active_low = 0,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "on_off button",
+ },
+};
+
+static struct gpio_keys_platform_data gpio_keys_platform_data = {
+ .buttons = gpio_keys_button,
+ .nbuttons = ARRAY_SIZE(gpio_keys_button),
+ .rep = 0,
+};
+
+static struct platform_device raumfeld_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_keys_platform_data,
+ }
+};
+
+/**
+ * GPIO LEDs
+ */
+
+static struct gpio_led raumfeld_leds[] = {
+ {
+ .name = "raumfeld:1",
+ .gpio = GPIO_LED1,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "raumfeld:2",
+ .gpio = GPIO_LED2,
+ .active_low = 0,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }
+};
+
+static struct gpio_led_platform_data raumfeld_led_platform_data = {
+ .leds = raumfeld_leds,
+ .num_leds = ARRAY_SIZE(raumfeld_leds),
+};
+
+static struct platform_device raumfeld_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &raumfeld_led_platform_data,
+ },
+};
+
+/**
+ * One-wire (W1 bus) support
+ */
+
+static void w1_enable_external_pullup(int enable)
+{
+ gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
+ msleep(100);
+}
+
+static struct gpiod_lookup_table raumfeld_w1_gpiod_table = {
+ .dev_id = "w1-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("gpio-pxa", GPIO_ONE_WIRE, NULL, 0,
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ },
+};
+
+static struct w1_gpio_platform_data w1_gpio_platform_data = {
+ .enable_external_pullup = w1_enable_external_pullup,
+};
+
+static struct platform_device raumfeld_w1_gpio_device = {
+ .name = "w1-gpio",
+ .dev = {
+ .platform_data = &w1_gpio_platform_data
+ }
+};
+
+static void __init raumfeld_w1_init(void)
+{
+ int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
+ "W1 external pullup enable");
+
+ if (ret < 0)
+ pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n");
+ else
+ gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
+
+ gpiod_add_lookup_table(&raumfeld_w1_gpiod_table);
+ platform_device_register(&raumfeld_w1_gpio_device);
+}
+
+/**
+ * Framebuffer device
+ */
+
+static struct pwm_lookup raumfeld_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000,
+ PWM_POLARITY_NORMAL),
+};
+
+/* PWM controlled backlight */
+static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .enable_gpio = -1,
+};
+
+static struct platform_device raumfeld_pwm_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &raumfeld_pwm_backlight_data,
+ }
+};
+
+/* LT3593 controlled backlight */
+static struct gpio_led raumfeld_lt3593_led = {
+ .name = "backlight",
+ .gpio = mfp_to_gpio(MFP_PIN_GPIO17),
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+};
+
+static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
+ .leds = &raumfeld_lt3593_led,
+ .num_leds = 1,
+};
+
+static struct platform_device raumfeld_lt3593_device = {
+ .name = "leds-lt3593",
+ .id = -1,
+ .dev = {
+ .platform_data = &raumfeld_lt3593_platform_data,
+ },
+};
+
+static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
+ .pixclock = 111000,
+ .xres = 480,
+ .yres = 272,
+ .bpp = 16,
+ .hsync_len = 41,
+ .left_margin = 2,
+ .right_margin = 1,
+ .vsync_len = 10,
+ .upper_margin = 3,
+ .lower_margin = 1,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
+ .modes = &sharp_lq043t3dx02_mode,
+ .num_modes = 1,
+ .video_mem_size = 0x400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+#ifdef CONFIG_PXA3XX_GCU
+ .acceleration_enabled = 1,
+#endif
+};
+
+static void __init raumfeld_lcd_init(void)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
+ if (ret < 0)
+ pr_warn("Unable to request GPIO_TFT_VA_EN\n");
+ else
+ gpio_direction_output(GPIO_TFT_VA_EN, 1);
+
+ msleep(100);
+
+ ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
+ if (ret < 0)
+ pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n");
+ else
+ gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+
+ /* Hardware revision 2 has the backlight regulator controlled
+ * by an LT3593, earlier and later devices use PWM for that. */
+ if ((system_rev & 0xff) == 2) {
+ platform_device_register(&raumfeld_lt3593_device);
+ } else {
+ mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+ pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+ pwm_add_table(raumfeld_pwm_lookup,
+ ARRAY_SIZE(raumfeld_pwm_lookup));
+ platform_device_register(&raumfeld_pwm_backlight_device);
+ }
+
+ pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
+ platform_device_register(&pxa3xx_device_gcu);
+}
+
+/**
+ * SPI devices
+ */
+
+static struct spi_gpio_platform_data raumfeld_spi_platform_data = {
+ .num_chipselect = 3,
+};
+
+static struct platform_device raumfeld_spi_device = {
+ .name = "spi_gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &raumfeld_spi_platform_data,
+ }
+};
+
+static struct gpiod_lookup_table raumfeld_spi_gpiod_table = {
+ .dev_id = "spi_gpio",
+ .table = {
+ GPIO_LOOKUP("gpio-0", GPIO_SPI_CLK,
+ "sck", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-0", GPIO_SPI_MOSI,
+ "mosi", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-0", GPIO_SPI_MISO,
+ "miso", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio-0", GPIO_SPDIF_CS,
+ "cs", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio-0", GPIO_ACCEL_CS,
+ "cs", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio-0", GPIO_MCLK_DAC_CS,
+ "cs", 2, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct lis3lv02d_platform_data lis3_pdata = {
+ .click_flags = LIS3_CLICK_SINGLE_X |
+ LIS3_CLICK_SINGLE_Y |
+ LIS3_CLICK_SINGLE_Z,
+ .irq_cfg = LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
+ .wakeup_flags = LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
+ LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
+ LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
+ .wakeup_thresh = 10,
+ .click_thresh_x = 10,
+ .click_thresh_y = 10,
+ .click_thresh_z = 10,
+};
+
+#define SPI_AK4104 \
+{ \
+ .modalias = "ak4104-codec", \
+ .max_speed_hz = 10000, \
+ .bus_num = 0, \
+ .chip_select = 0, \
+}
+
+#define SPI_LIS3 \
+{ \
+ .modalias = "lis3lv02d_spi", \
+ .max_speed_hz = 1000000, \
+ .bus_num = 0, \
+ .chip_select = 1, \
+ .platform_data = &lis3_pdata, \
+ .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \
+}
+
+#define SPI_DAC7512 \
+{ \
+ .modalias = "dac7512", \
+ .max_speed_hz = 1000000, \
+ .bus_num = 0, \
+ .chip_select = 2, \
+}
+
+static struct spi_board_info connector_spi_devices[] __initdata = {
+ SPI_AK4104,
+ SPI_DAC7512,
+};
+
+static struct spi_board_info speaker_spi_devices[] __initdata = {
+ SPI_DAC7512,
+};
+
+static struct spi_board_info controller_spi_devices[] __initdata = {
+ SPI_LIS3,
+};
+
+/**
+ * MMC for Marvell Libertas 8688 via SDIO
+ */
+
+static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
+{
+ gpio_set_value(GPIO_W2W_RESET, 1);
+ gpio_set_value(GPIO_W2W_PDN, 1);
+
+ return 0;
+}
+
+static void raumfeld_mci_exit(struct device *dev, void *data)
+{
+ gpio_set_value(GPIO_W2W_RESET, 0);
+ gpio_set_value(GPIO_W2W_PDN, 0);
+}
+
+static struct pxamci_platform_data raumfeld_mci_platform_data = {
+ .init = raumfeld_mci_init,
+ .exit = raumfeld_mci_exit,
+ .detect_delay_ms = 200,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+/*
+ * External power / charge logic
+ */
+
+static int power_supply_init(struct device *dev)
+{
+ return 0;
+}
+
+static void power_supply_exit(struct device *dev)
+{
+}
+
+static int raumfeld_is_ac_online(void)
+{
+ return !gpio_get_value(GPIO_CHARGE_DC_OK);
+}
+
+static int raumfeld_is_usb_online(void)
+{
+ return 0;
+}
+
+static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
+
+static void raumfeld_power_signal_charged(void)
+{
+ struct power_supply *psy =
+ power_supply_get_by_name(raumfeld_power_supplicants[0]);
+
+ if (psy) {
+ power_supply_set_battery_charged(psy);
+ power_supply_put(psy);
+ }
+}
+
+static int raumfeld_power_resume(void)
+{
+ /* check if GPIO_CHARGE_DONE went low while we were sleeping */
+ if (!gpio_get_value(GPIO_CHARGE_DONE))
+ raumfeld_power_signal_charged();
+
+ return 0;
+}
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = raumfeld_is_ac_online,
+ .is_usb_online = raumfeld_is_usb_online,
+ .exit = power_supply_exit,
+ .supplied_to = raumfeld_power_supplicants,
+ .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants),
+ .resume = raumfeld_power_resume,
+};
+
+static struct resource power_supply_resources[] = {
+ {
+ .name = "ac",
+ .flags = IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+ .start = GPIO_CHARGE_DC_OK,
+ .end = GPIO_CHARGE_DC_OK,
+ },
+};
+
+static irqreturn_t charge_done_irq(int irq, void *dev_id)
+{
+ raumfeld_power_signal_charged();
+ return IRQ_HANDLED;
+}
+
+static struct platform_device raumfeld_power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+static void __init raumfeld_power_init(void)
+{
+ int ret;
+
+ /* Set PEN2 high to enable maximum charge current */
+ ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
+ if (ret < 0)
+ pr_warn("Unable to request GPIO_CHRG_PEN2\n");
+ else
+ gpio_direction_output(GPIO_CHRG_PEN2, 1);
+
+ ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
+ if (ret < 0)
+ pr_warn("Unable to request GPIO_CHARGE_DC_OK\n");
+
+ ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
+ if (ret < 0)
+ pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n");
+ else
+ gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
+
+ power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
+ power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
+
+ ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
+ &charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
+ "charge_done", NULL);
+
+ if (ret < 0)
+ printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
+ GPIO_CHARGE_DONE);
+ else
+ platform_device_register(&raumfeld_power_supply);
+}
+
+/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
+
+static struct regulator_consumer_supply audio_va_consumer_supply =
+ REGULATOR_SUPPLY("va", "0-0048");
+
+static struct regulator_init_data audio_va_initdata = {
+ .consumer_supplies = &audio_va_consumer_supply,
+ .num_consumer_supplies = 1,
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct fixed_voltage_config audio_va_config = {
+ .supply_name = "audio_va",
+ .microvolts = 5000000,
+ .gpio = GPIO_AUDIO_VA_ENABLE,
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &audio_va_initdata,
+};
+
+static struct platform_device audio_va_device = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &audio_va_config,
+ },
+};
+
+/* Dummy supplies for Codec's VD/VLC */
+
+static struct regulator_consumer_supply audio_dummy_supplies[] = {
+ REGULATOR_SUPPLY("vd", "0-0048"),
+ REGULATOR_SUPPLY("vlc", "0-0048"),
+};
+
+static struct regulator_init_data audio_dummy_initdata = {
+ .consumer_supplies = audio_dummy_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct fixed_voltage_config audio_dummy_config = {
+ .supply_name = "audio_vd",
+ .microvolts = 3300000,
+ .gpio = -1,
+ .init_data = &audio_dummy_initdata,
+};
+
+static struct platform_device audio_supply_dummy_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &audio_dummy_config,
+ },
+};
+
+static struct platform_device *audio_regulator_devices[] = {
+ &audio_va_device,
+ &audio_supply_dummy_device,
+};
+
+/**
+ * Regulator support via MAX8660
+ */
+
+static struct regulator_consumer_supply vcc_mmc_supply =
+ REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
+
+static struct regulator_init_data vcc_mmc_init_data = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE,
+ },
+ .consumer_supplies = &vcc_mmc_supply,
+ .num_consumer_supplies = 1,
+};
+
+static struct max8660_subdev_data max8660_v6_subdev_data = {
+ .id = MAX8660_V6,
+ .name = "vmmc",
+ .platform_data = &vcc_mmc_init_data,
+};
+
+static struct max8660_platform_data max8660_pdata = {
+ .subdevs = &max8660_v6_subdev_data,
+ .num_subdevs = 1,
+};
+
+/**
+ * I2C devices
+ */
+
+static struct i2c_board_info raumfeld_pwri2c_board_info = {
+ .type = "max8660",
+ .addr = 0x34,
+ .platform_data = &max8660_pdata,
+};
+
+static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
+ .type = "cs4270",
+ .addr = 0x48,
+};
+
+static struct gpiod_lookup_table raumfeld_controller_gpios_table = {
+ .dev_id = "0-000a",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa",
+ GPIO_TOUCH_IRQ, "attn", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static const struct resource raumfeld_controller_resources[] __initconst = {
+ {
+ .start = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+ },
+};
+
+static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
+ .type = "eeti_ts",
+ .addr = 0x0a,
+ .resources = raumfeld_controller_resources,
+ .num_resources = ARRAY_SIZE(raumfeld_controller_resources),
+};
+
+static struct platform_device *raumfeld_common_devices[] = {
+ &raumfeld_gpio_keys_device,
+ &raumfeld_led_device,
+ &raumfeld_spi_device,
+};
+
+static void __init raumfeld_audio_init(void)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
+ if (ret < 0)
+ pr_warn("unable to request GPIO_CODEC_RESET\n");
+ else
+ gpio_direction_output(GPIO_CODEC_RESET, 1);
+
+ ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
+ if (ret < 0)
+ pr_warn("unable to request GPIO_SPDIF_RESET\n");
+ else
+ gpio_direction_output(GPIO_SPDIF_RESET, 1);
+
+ ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
+ if (ret < 0)
+ pr_warn("unable to request GPIO_MCLK_RESET\n");
+ else
+ gpio_direction_output(GPIO_MCLK_RESET, 1);
+
+ platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
+}
+
+static void __init raumfeld_common_init(void)
+{
+ int ret;
+
+ /* The on/off button polarity has changed after revision 1 */
+ if ((system_rev & 0xff) > 1) {
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
+ if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
+ gpio_keys_button[i].active_low = 1;
+ }
+
+ enable_irq_wake(IRQ_WAKEUP0);
+
+ pxa3xx_set_nand_info(&raumfeld_nand_info);
+ pxa3xx_set_i2c_power_info(NULL);
+ pxa_set_ohci_info(&raumfeld_ohci_info);
+ pxa_set_mci_info(&raumfeld_mci_platform_data);
+ pxa_set_i2c_info(NULL);
+ pxa_set_ffuart_info(NULL);
+
+ ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
+ if (ret < 0)
+ pr_warn("Unable to request GPIO_W2W_RESET\n");
+ else
+ gpio_direction_output(GPIO_W2W_RESET, 0);
+
+ ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
+ if (ret < 0)
+ pr_warn("Unable to request GPIO_W2W_PDN\n");
+ else
+ gpio_direction_output(GPIO_W2W_PDN, 0);
+
+ /* this can be used to switch off the device */
+ ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
+ if (ret < 0)
+ pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
+ else
+ gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
+
+ gpiod_add_lookup_table(&raumfeld_spi_gpiod_table);
+ platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
+ i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
+}
+
+static void __init __maybe_unused raumfeld_controller_init(void)
+{
+ int ret;
+
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
+
+ gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
+ device_add_properties(&rotary_encoder_device.dev,
+ raumfeld_rotary_properties);
+ platform_device_register(&rotary_encoder_device);
+
+ spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
+
+ gpiod_add_lookup_table(&raumfeld_controller_gpios_table);
+ i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
+
+ ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
+ if (ret < 0)
+ pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n");
+ else
+ gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
+
+ raumfeld_common_init();
+ raumfeld_power_init();
+ raumfeld_lcd_init();
+ raumfeld_w1_init();
+}
+
+static void __init __maybe_unused raumfeld_connector_init(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
+ spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
+ i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+ platform_device_register(&smc91x_device);
+
+ raumfeld_audio_init();
+ raumfeld_common_init();
+}
+
+static void __init __maybe_unused raumfeld_speaker_init(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
+ spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
+ i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+ platform_device_register(&smc91x_device);
+
+ gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
+ device_add_properties(&rotary_encoder_device.dev,
+ raumfeld_rotary_properties);
+ platform_device_register(&rotary_encoder_device);
+
+ raumfeld_audio_init();
+ raumfeld_common_init();
+}
+
+/* physical memory regions */
+#define RAUMFELD_SDRAM_BASE 0xa0000000 /* SDRAM region */
+
+#ifdef CONFIG_MACH_RAUMFELD_RC
+MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
+ .atag_offset = 0x100,
+ .init_machine = raumfeld_controller_init,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
+MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
+ .atag_offset = 0x100,
+ .init_machine = raumfeld_connector_init,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
+MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
+ .atag_offset = 0x100,
+ .init_machine = raumfeld_speaker_init,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/regs-rtc.h b/arch/arm/mach-pxa/regs-rtc.h
new file mode 100644
index 0000000..b1f9ff1
--- /dev/null
+++ b/arch/arm/mach-pxa/regs-rtc.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MACH_REGS_RTC_H
+#define __ASM_MACH_REGS_RTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR __REG(0x40900000) /* RTC Count Register */
+#define RTAR __REG(0x40900004) /* RTC Alarm Register */
+#define RTSR __REG(0x40900008) /* RTC Status Register */
+#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
+#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
+#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
+#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
+#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
+#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
+#define RTSR_AL (1 << 0) /* RTC alarm detected */
+
+#endif /* __ASM_MACH_REGS_RTC_H */
diff --git a/arch/arm/mach-pxa/regs-u2d.h b/arch/arm/mach-pxa/regs-u2d.h
new file mode 100644
index 0000000..fe4c80a
--- /dev/null
+++ b/arch/arm/mach-pxa/regs-u2d.h
@@ -0,0 +1,201 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_PXA3xx_U2D_H
+#define __ASM_ARCH_PXA3xx_U2D_H
+
+#include <mach/bitfield.h>
+
+/*
+ * USB2 device controller registers and bits definitions
+ */
+#define U2DCR (0x0000) /* U2D Control Register */
+#define U2DCR_NDC (1 << 31) /* NAK During Config */
+#define U2DCR_HSTC (0x7 << 28) /* High Speed Timeout Calibration */
+#define U2DCR_SPEOREN (1 << 27) /* Short Packet EOR INTR generation Enable */
+#define U2DCR_FSTC (0x7 << 24) /* Full Speed Timeout Calibration */
+#define U2DCR_UCLKOVR (1 << 22) /* UTM Clock Override */
+#define U2DCR_ABP (1 << 21) /* Application Bus Power */
+#define U2DCR_ADD (1 << 20) /* Application Device Disconnect */
+#define U2DCR_CC (1 << 19) /* Configuration Change */
+#define U2DCR_HS (1 << 18) /* High Speed USB Detection */
+#define U2DCR_SMAC (1 << 17) /* Switch Endpoint Memory to Active Configuration */
+#define U2DCR_DWRE (1 << 16) /* Device Remote Wake-up Feature */
+#define U2DCR_ACN (0xf << 12) /* Active U2D Configuration Number */
+#define U2DCR_AIN (0xf << 8) /* Active U2D Interface Number */
+#define U2DCR_AAISN (0xf << 4) /* Active U2D Alternate Interface Setting Number */
+#define U2DCR_EMCE (1 << 3) /* Endpoint Memory Configuration Error */
+#define U2DCR_UDR (1 << 2) /* U2D Resume */
+#define U2DCR_UDA (1 << 1) /* U2D Active */
+#define U2DCR_UDE (1 << 0) /* U2D Enable */
+
+#define U2DICR (0x0004) /* U2D Interrupt Control Register */
+#define U2DISR (0x000C) /* U2D Interrupt Status Register */
+#define U2DINT_CC (1 << 31) /* Interrupt - Configuration Change */
+#define U2DINT_SOF (1 << 30) /* Interrupt - SOF */
+#define U2DINT_USOF (1 << 29) /* Interrupt - micro SOF */
+#define U2DINT_RU (1 << 28) /* Interrupt - Resume */
+#define U2DINT_SU (1 << 27) /* Interrupt - Suspend */
+#define U2DINT_RS (1 << 26) /* Interrupt - Reset */
+#define U2DINT_DPE (1 << 25) /* Interrupt - Data Packet Error */
+#define U2DINT_FIFOERR (0x4) /* Interrupt - endpoint FIFO error */
+#define U2DINT_PACKETCMP (0x2) /* Interrupt - endpoint packet complete */
+#define U2DINT_SPACKETCMP (0x1) /* Interrupt - endpoint short packet complete */
+
+#define U2DFNR (0x0014) /* U2D Frame Number Register */
+
+#define U2DINT(n, intr) (((intr) & 0x07) << (((n) & 0x07) * 3))
+#define U2DICR2 (0x0008) /* U2D Interrupt Control Register 2 */
+#define U2DISR2 (0x0010) /* U2D Interrupt Status Register 2 */
+
+#define U2DOTGCR (0x0020) /* U2D OTG Control Register */
+#define U2DOTGCR_OTGEN (1 << 31) /* On-The-Go Enable */
+#define U2DOTGCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation Protocal Port Support */
+#define U2DOTGCR_AHNP (1 << 29) /* A-device Host Negotiation Protocal Support */
+#define U2DOTGCR_BHNP (1 << 28) /* B-device Host Negotiation Protocal Enable */
+
+#ifdef CONFIG_CPU_PXA930
+#define U2DOTGCR_LPA (1 << 15) /* ULPI low power mode active */
+#define U2DOTGCR_IESI (1 << 13) /* OTG interrupt Enable */
+#define U2DOTGCR_ISSI (1 << 12) /* OTG interrupt status */
+#endif
+
+#define U2DOTGCR_CKAF (1 << 5) /* Carkit Mode Alternate Function Select */
+#define U2DOTGCR_UTMID (1 << 4) /* UTMI Interface Disable */
+#define U2DOTGCR_ULAF (1 << 3) /* ULPI Mode Alternate Function Select */
+#define U2DOTGCR_SMAF (1 << 2) /* Serial Mode Alternate Function Select */
+#define U2DOTGCR_RTSM (1 << 1) /* Return to Synchronous Mode (ULPI Mode) */
+#define U2DOTGCR_ULE (1 << 0) /* ULPI Wrapper Enable */
+
+#define U2DOTGICR (0x0024) /* U2D OTG Interrupt Control Register */
+#define U2DOTGISR (0x0028) /* U2D OTG Interrupt Status Register */
+
+#define U2DOTGINT_SF (1 << 17) /* OTG Set Feature Command Received */
+#define U2DOTGINT_SI (1 << 16) /* OTG Interrupt */
+#define U2DOTGINT_RLS1 (1 << 14) /* RXCMD Linestate[1] Change Interrupt Rise */
+#define U2DOTGINT_RLS0 (1 << 13) /* RXCMD Linestate[0] Change Interrupt Rise */
+#define U2DOTGINT_RID (1 << 12) /* RXCMD OTG ID Change Interrupt Rise */
+#define U2DOTGINT_RSE (1 << 11) /* RXCMD OTG Session End Interrupt Rise */
+#define U2DOTGINT_RSV (1 << 10) /* RXCMD OTG Session Valid Interrupt Rise */
+#define U2DOTGINT_RVV (1 << 9) /* RXCMD OTG Vbus Valid Interrupt Rise */
+#define U2DOTGINT_RCK (1 << 8) /* RXCMD Carkit Interrupt Rise */
+#define U2DOTGINT_FLS1 (1 << 6) /* RXCMD Linestate[1] Change Interrupt Fall */
+#define U2DOTGINT_FLS0 (1 << 5) /* RXCMD Linestate[0] Change Interrupt Fall */
+#define U2DOTGINT_FID (1 << 4) /* RXCMD OTG ID Change Interrupt Fall */
+#define U2DOTGINT_FSE (1 << 3) /* RXCMD OTG Session End Interrupt Fall */
+#define U2DOTGINT_FSV (1 << 2) /* RXCMD OTG Session Valid Interrupt Fall */
+#define U2DOTGINT_FVV (1 << 1) /* RXCMD OTG Vbus Valid Interrupt Fall */
+#define U2DOTGINT_FCK (1 << 0) /* RXCMD Carkit Interrupt Fall */
+
+#define U2DOTGUSR (0x002C) /* U2D OTG ULPI Status Register */
+#define U2DOTGUSR_LPA (1 << 31) /* ULPI Low Power Mode Active */
+#define U2DOTGUSR_S6A (1 << 30) /* ULPI Serial Mode (6-pin) Active */
+#define U2DOTGUSR_S3A (1 << 29) /* ULPI Serial Mode (3-pin) Active */
+#define U2DOTGUSR_CKA (1 << 28) /* ULPI Car Kit Mode Active */
+#define U2DOTGUSR_LS1 (1 << 6) /* RXCMD Linestate 1 Status */
+#define U2DOTGUSR_LS0 (1 << 5) /* RXCMD Linestate 0 Status */
+#define U2DOTGUSR_ID (1 << 4) /* OTG IDGnd Status */
+#define U2DOTGUSR_SE (1 << 3) /* OTG Session End Status */
+#define U2DOTGUSR_SV (1 << 2) /* OTG Session Valid Status */
+#define U2DOTGUSR_VV (1 << 1) /* OTG Vbus Valid Status */
+#define U2DOTGUSR_CK (1 << 0) /* Carkit Interrupt Status */
+
+#define U2DOTGUCR (0x0030) /* U2D OTG ULPI Control Register */
+#define U2DOTGUCR_RUN (1 << 25) /* RUN */
+#define U2DOTGUCR_RNW (1 << 24) /* Read or Write operation */
+#define U2DOTGUCR_ADDR (0x3f << 16) /* Address of the ULPI PHY register */
+#define U2DOTGUCR_WDATA (0xff << 8) /* The data for a WRITE command */
+#define U2DOTGUCR_RDATA (0xff << 0) /* The data for a READ command */
+
+#define U2DP3CR (0x0034) /* U2D Port 3 Control Register */
+#define U2DP3CR_P2SS (0x3 << 8) /* Host Port 2 Serial Mode Select */
+#define U2DP3CR_P3SS (0x7 << 4) /* Host Port 3 Serial Mode Select */
+#define U2DP3CR_VPVMBEN (0x1 << 2) /* Host Port 3 Vp/Vm Block Enable */
+#define U2DP3CR_CFG (0x3 << 0) /* Host Port 3 Configuration */
+
+#define U2DCSR0 (0x0100) /* U2D Control/Status Register - Endpoint 0 */
+#define U2DCSR0_IPA (1 << 8) /* IN Packet Adjusted */
+#define U2DCSR0_SA (1 << 7) /* SETUP Active */
+#define U2DCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
+#define U2DCSR0_FST (1 << 5) /* Force Stall */
+#define U2DCSR0_SST (1 << 4) /* Send Stall */
+#define U2DCSR0_DME (1 << 3) /* DMA Enable */
+#define U2DCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
+#define U2DCSR0_IPR (1 << 1) /* IN Packet Ready */
+#define U2DCSR0_OPC (1 << 0) /* OUT Packet Complete */
+
+#define U2DCSR(x) (0x0100 + ((x) << 2)) /* U2D Control/Status Register - Endpoint x */
+#define U2DCSR_BF (1 << 10) /* Buffer Full, for OUT eps */
+#define U2DCSR_BE (1 << 10) /* Buffer Empty, for IN eps */
+#define U2DCSR_DPE (1 << 9) /* Data Packet Error, for ISO eps only */
+#define U2DCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
+#define U2DCSR_SP (1 << 7) /* Short Packet Control/Status, for OUT eps only, readonly */
+#define U2DCSR_BNE (1 << 6) /* Buffer Not Empty, for OUT eps */
+#define U2DCSR_BNF (1 << 6) /* Buffer Not Full, for IN eps */
+#define U2DCSR_FST (1 << 5) /* Force STALL, write 1 set */
+#define U2DCSR_SST (1 << 4) /* Sent STALL, write 1 clear */
+#define U2DCSR_DME (1 << 3) /* DMA Enable */
+#define U2DCSR_TRN (1 << 2) /* Tx/Rx NAK, write 1 clear */
+#define U2DCSR_PC (1 << 1) /* Packet Complete, write 1 clear */
+#define U2DCSR_FS (1 << 0) /* FIFO needs Service */
+
+#define U2DBCR0 (0x0200) /* U2D Byte Count Register - Endpoint 0 */
+#define U2DBCR(x) (0x0200 + ((x) << 2)) /* U2D Byte Count Register - Endpoint x */
+
+#define U2DDR0 (0x0300) /* U2D Data Register - Endpoint 0 */
+
+#define U2DEPCR(x) (0x0400 + ((x) << 2)) /* U2D Configuration Register - Endpoint x */
+#define U2DEPCR_EE (1 << 0) /* Endpoint Enable */
+#define U2DEPCR_BS_MASK (0x3FE) /* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */
+
+#define U2DSCA (0x0500) /* U2D Setup Command Address */
+#define U2DSCA_VALUE (0x0120)
+
+#define U2DEN0 (0x0504) /* U2D Endpoint Information Register - Endpoint 0 */
+#define U2DEN(x) (0x0504 + ((x) << 2)) /* U2D Endpoint Information Register - Endpoint x */
+
+/* U2DMA registers */
+#define U2DMACSR0 (0x1000) /* U2DMA Control/Status Register - Channel 0 */
+#define U2DMACSR(x) (0x1000 + ((x) << 2)) /* U2DMA Control/Status Register - Channel x */
+#define U2DMACSR_RUN (1 << 31) /* Run Bit (read / write) */
+#define U2DMACSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
+#define U2DMACSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
+#define U2DMACSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
+#define U2DMACSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
+#define U2DMACSR_RASIRQEN (1 << 23) /* Request After Cnannel Stopped Interrupt Enable */
+#define U2DMACSR_MASKRUN (1 << 22) /* Mask Run */
+#define U2DMACSR_SCEMC (3 << 18) /* System Bus Split Completion Error Message Class */
+#define U2DMACSR_SCEMI (0x1f << 13) /* System Bus Split Completion Error Message Index */
+#define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */
+#define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */
+#define U2DMACSR_REQPEND (1 << 8) /* Request Pending */
+#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */
+#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */
+#define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */
+#define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */
+#define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */
+
+#define U2DMACR (0x1080) /* U2DMA Control Register */
+#define U2DMAINT (0x10F0) /* U2DMA Interrupt Register */
+
+#define U2DMABR0 (0x1100) /* U2DMA Branch Register - Channel 0 */
+#define U2DMABR(x) (0x1100 + (x) << 2) /* U2DMA Branch Register - Channel x */
+
+#define U2DMADADR0 (0x1200) /* U2DMA Descriptor Address Register - Channel 0 */
+#define U2DMADADR(x) (0x1200 + (x) * 0x10) /* U2DMA Descriptor Address Register - Channel x */
+
+#define U2DMADADR_STOP (1U << 0)
+
+#define U2DMASADR0 (0x1204) /* U2DMA Source Address Register - Channel 0 */
+#define U2DMASADR(x) (0x1204 + (x) * 0x10) /* U2DMA Source Address Register - Channel x */
+#define U2DMATADR0 (0x1208) /* U2DMA Target Address Register - Channel 0 */
+#define U2DMATADR(x) (0x1208 + (x) * 0x10) /* U2DMA Target Address Register - Channel x */
+
+#define U2DMACMDR0 (0x120C) /* U2DMA Command Address Register - Channel 0 */
+#define U2DMACMDR(x) (0x120C + (x) * 0x10) /* U2DMA Command Address Register - Channel x */
+
+#define U2DMACMDR_XFRDIS (1 << 31) /* Transfer Direction */
+#define U2DMACMDR_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define U2DMACMDR_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define U2DMACMDR_PACKCOMP (1 << 13) /* Packet Complete */
+#define U2DMACMDR_LEN (0x07ff) /* length mask (max = 2K - 1) */
+
+#endif /* __ASM_ARCH_PXA3xx_U2D_H */
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
new file mode 100644
index 0000000..263b152
--- /dev/null
+++ b/arch/arm/mach-pxa/reset.c
@@ -0,0 +1,113 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+#include <asm/system_misc.h>
+
+#include <mach/regs-ost.h>
+#include <mach/reset.h>
+#include <mach/smemc.h>
+
+unsigned int reset_status;
+EXPORT_SYMBOL(reset_status);
+
+static void do_hw_reset(void);
+
+static int reset_gpio = -1;
+
+int init_gpio_reset(int gpio, int output, int level)
+{
+ int rc;
+
+ rc = gpio_request(gpio, "reset generator");
+ if (rc) {
+ printk(KERN_ERR "Can't request reset_gpio\n");
+ goto out;
+ }
+
+ if (output)
+ rc = gpio_direction_output(gpio, level);
+ else
+ rc = gpio_direction_input(gpio);
+ if (rc) {
+ printk(KERN_ERR "Can't configure reset_gpio\n");
+ gpio_free(gpio);
+ goto out;
+ }
+
+out:
+ if (!rc)
+ reset_gpio = gpio;
+
+ return rc;
+}
+
+/*
+ * Trigger GPIO reset.
+ * This covers various types of logic connecting gpio pin
+ * to RESET pins (nRESET or GPIO_RESET):
+ */
+static void do_gpio_reset(void)
+{
+ BUG_ON(reset_gpio == -1);
+
+ /* drive it low */
+ gpio_direction_output(reset_gpio, 0);
+ mdelay(2);
+ /* rising edge or drive high */
+ gpio_set_value(reset_gpio, 1);
+ mdelay(2);
+ /* falling edge */
+ gpio_set_value(reset_gpio, 0);
+
+ /* give it some time */
+ mdelay(10);
+
+ WARN_ON(1);
+ /* fallback */
+ do_hw_reset();
+}
+
+static void do_hw_reset(void)
+{
+ /* Initialize the watchdog and let it fire */
+ writel_relaxed(OWER_WME, OWER);
+ writel_relaxed(OSSR_M3, OSSR);
+ /* ... in 100 ms */
+ writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3);
+ /*
+ * SDRAM hangs on watchdog reset on Marvell PXA270 (erratum 71)
+ * we put SDRAM into self-refresh to prevent that
+ */
+ while (1)
+ writel_relaxed(MDREFR_SLFRSH, MDREFR);
+}
+
+void pxa_restart(enum reboot_mode mode, const char *cmd)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ clear_reset_status(RESET_STATUS_ALL);
+
+ switch (mode) {
+ case REBOOT_SOFT:
+ /* Jump into ROM at address 0 */
+ soft_restart(0);
+ break;
+ case REBOOT_GPIO:
+ do_gpio_reset();
+ break;
+ case REBOOT_HARD:
+ default:
+ do_hw_reset();
+ break;
+ }
+}
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
new file mode 100644
index 0000000..8349910
--- /dev/null
+++ b/arch/arm/mach-pxa/saar.c
@@ -0,0 +1,607 @@
+/*
+ * linux/arch/arm/mach-pxa/saar.c
+ *
+ * Support for the Marvell PXA930 Handheld Platform (aka SAAR)
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/smc91x.h>
+#include <linux/mfd/da903x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+#include "pxa930.h"
+#include <linux/platform_data/video-pxafb.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define GPIO_LCD_RESET (16)
+
+/* SAAR MFP configurations */
+static mfp_cfg_t saar_mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO23_LCD_DD0,
+ GPIO24_LCD_DD1,
+ GPIO25_LCD_DD2,
+ GPIO26_LCD_DD3,
+ GPIO27_LCD_DD4,
+ GPIO28_LCD_DD5,
+ GPIO29_LCD_DD6,
+ GPIO44_LCD_DD7,
+ GPIO21_LCD_CS,
+ GPIO22_LCD_VSYNC,
+ GPIO17_LCD_FCLK_RD,
+ GPIO18_LCD_LCLK_A0,
+ GPIO19_LCD_PCLK_WR,
+ GPIO16_GPIO, /* LCD reset */
+
+ /* Ethernet */
+ DF_nCS1_nCS3,
+ GPIO97_GPIO,
+
+ /* DFI */
+ DF_INT_RnB_ND_INT_RnB,
+ DF_nRE_nOE_ND_nRE,
+ DF_nWE_ND_nWE,
+ DF_CLE_nOE_ND_CLE,
+ DF_nADV1_ALE_ND_ALE,
+ DF_nADV2_ALE_nCS3,
+ DF_nCS0_ND_nCS0,
+ DF_IO0_ND_IO0,
+ DF_IO1_ND_IO1,
+ DF_IO2_ND_IO2,
+ DF_IO3_ND_IO3,
+ DF_IO4_ND_IO4,
+ DF_IO5_ND_IO5,
+ DF_IO6_ND_IO6,
+ DF_IO7_ND_IO7,
+ DF_IO8_ND_IO8,
+ DF_IO9_ND_IO9,
+ DF_IO10_ND_IO10,
+ DF_IO11_ND_IO11,
+ DF_IO12_ND_IO12,
+ DF_IO13_ND_IO13,
+ DF_IO14_ND_IO14,
+ DF_IO15_ND_IO15,
+};
+
+#define SAAR_ETH_PHYS (0x14000000)
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = (SAAR_ETH_PHYS + 0x300),
+ .end = (SAAR_ETH_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata saar_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &saar_smc91x_info,
+ },
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static uint16_t lcd_power_on[] = {
+ /* single frame */
+ SMART_CMD_NOOP,
+ SMART_CMD(0x00),
+ SMART_DELAY(0),
+
+ SMART_CMD_NOOP,
+ SMART_CMD(0x00),
+ SMART_DELAY(0),
+
+ SMART_CMD_NOOP,
+ SMART_CMD(0x00),
+ SMART_DELAY(0),
+
+ SMART_CMD_NOOP,
+ SMART_CMD(0x00),
+ SMART_DELAY(10),
+
+ /* calibration control */
+ SMART_CMD(0x00),
+ SMART_CMD(0xA4),
+ SMART_DAT(0x80),
+ SMART_DAT(0x01),
+ SMART_DELAY(150),
+
+ /*Power-On Init sequence*/
+ SMART_CMD(0x00), /* output ctrl */
+ SMART_CMD(0x01),
+ SMART_DAT(0x01),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00), /* wave ctrl */
+ SMART_CMD(0x02),
+ SMART_DAT(0x07),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x03), /* entry mode */
+ SMART_DAT(0xD0),
+ SMART_DAT(0x30),
+ SMART_CMD(0x00),
+ SMART_CMD(0x08), /* display ctrl 2 */
+ SMART_DAT(0x08),
+ SMART_DAT(0x08),
+ SMART_CMD(0x00),
+ SMART_CMD(0x09), /* display ctrl 3 */
+ SMART_DAT(0x04),
+ SMART_DAT(0x2F),
+ SMART_CMD(0x00),
+ SMART_CMD(0x0A), /* display ctrl 4 */
+ SMART_DAT(0x00),
+ SMART_DAT(0x08),
+ SMART_CMD(0x00),
+ SMART_CMD(0x0D), /* Frame Marker position */
+ SMART_DAT(0x00),
+ SMART_DAT(0x08),
+ SMART_CMD(0x00),
+ SMART_CMD(0x60), /* Driver output control */
+ SMART_DAT(0x27),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x61), /* Base image display control */
+ SMART_DAT(0x00),
+ SMART_DAT(0x01),
+ SMART_CMD(0x00),
+ SMART_CMD(0x30), /* Y settings 30h-3Dh */
+ SMART_DAT(0x07),
+ SMART_DAT(0x07),
+ SMART_CMD(0x00),
+ SMART_CMD(0x31),
+ SMART_DAT(0x00),
+ SMART_DAT(0x07),
+ SMART_CMD(0x00),
+ SMART_CMD(0x32), /* Timing(3), ASW HOLD=0.5CLK */
+ SMART_DAT(0x04),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x33), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
+ SMART_DAT(0x03),
+ SMART_DAT(0x03),
+ SMART_CMD(0x00),
+ SMART_CMD(0x34),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x35),
+ SMART_DAT(0x02),
+ SMART_DAT(0x05),
+ SMART_CMD(0x00),
+ SMART_CMD(0x36),
+ SMART_DAT(0x1F),
+ SMART_DAT(0x1F),
+ SMART_CMD(0x00),
+ SMART_CMD(0x37),
+ SMART_DAT(0x07),
+ SMART_DAT(0x07),
+ SMART_CMD(0x00),
+ SMART_CMD(0x38),
+ SMART_DAT(0x00),
+ SMART_DAT(0x07),
+ SMART_CMD(0x00),
+ SMART_CMD(0x39),
+ SMART_DAT(0x04),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x3A),
+ SMART_DAT(0x03),
+ SMART_DAT(0x03),
+ SMART_CMD(0x00),
+ SMART_CMD(0x3B),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x3C),
+ SMART_DAT(0x02),
+ SMART_DAT(0x05),
+ SMART_CMD(0x00),
+ SMART_CMD(0x3D),
+ SMART_DAT(0x1F),
+ SMART_DAT(0x1F),
+ SMART_CMD(0x00), /* Display control 1 */
+ SMART_CMD(0x07),
+ SMART_DAT(0x00),
+ SMART_DAT(0x01),
+ SMART_CMD(0x00), /* Power control 5 */
+ SMART_CMD(0x17),
+ SMART_DAT(0x00),
+ SMART_DAT(0x01),
+ SMART_CMD(0x00), /* Power control 1 */
+ SMART_CMD(0x10),
+ SMART_DAT(0x10),
+ SMART_DAT(0xB0),
+ SMART_CMD(0x00), /* Power control 2 */
+ SMART_CMD(0x11),
+ SMART_DAT(0x01),
+ SMART_DAT(0x30),
+ SMART_CMD(0x00), /* Power control 3 */
+ SMART_CMD(0x12),
+ SMART_DAT(0x01),
+ SMART_DAT(0x9E),
+ SMART_CMD(0x00), /* Power control 4 */
+ SMART_CMD(0x13),
+ SMART_DAT(0x17),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00), /* Power control 3 */
+ SMART_CMD(0x12),
+ SMART_DAT(0x01),
+ SMART_DAT(0xBE),
+ SMART_DELAY(100),
+
+ /* display mode : 240*320 */
+ SMART_CMD(0x00), /* RAM address set(H) 0*/
+ SMART_CMD(0x20),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00), /* RAM address set(V) 4*/
+ SMART_CMD(0x21),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00), /* Start of Window RAM address set(H) 8*/
+ SMART_CMD(0x50),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00), /* End of Window RAM address set(H) 12*/
+ SMART_CMD(0x51),
+ SMART_DAT(0x00),
+ SMART_DAT(0xEF),
+ SMART_CMD(0x00), /* Start of Window RAM address set(V) 16*/
+ SMART_CMD(0x52),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00), /* End of Window RAM address set(V) 20*/
+ SMART_CMD(0x53),
+ SMART_DAT(0x01),
+ SMART_DAT(0x3F),
+ SMART_CMD(0x00), /* Panel interface control 1 */
+ SMART_CMD(0x90),
+ SMART_DAT(0x00),
+ SMART_DAT(0x1A),
+ SMART_CMD(0x00), /* Panel interface control 2 */
+ SMART_CMD(0x92),
+ SMART_DAT(0x04),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00), /* Panel interface control 3 */
+ SMART_CMD(0x93),
+ SMART_DAT(0x00),
+ SMART_DAT(0x05),
+ SMART_DELAY(20),
+};
+
+static uint16_t lcd_panel_on[] = {
+ SMART_CMD(0x00),
+ SMART_CMD(0x07),
+ SMART_DAT(0x00),
+ SMART_DAT(0x21),
+ SMART_DELAY(1),
+
+ SMART_CMD(0x00),
+ SMART_CMD(0x07),
+ SMART_DAT(0x00),
+ SMART_DAT(0x61),
+ SMART_DELAY(100),
+
+ SMART_CMD(0x00),
+ SMART_CMD(0x07),
+ SMART_DAT(0x01),
+ SMART_DAT(0x73),
+ SMART_DELAY(1),
+};
+
+static uint16_t lcd_panel_off[] = {
+ SMART_CMD(0x00),
+ SMART_CMD(0x07),
+ SMART_DAT(0x00),
+ SMART_DAT(0x72),
+ SMART_DELAY(40),
+
+ SMART_CMD(0x00),
+ SMART_CMD(0x07),
+ SMART_DAT(0x00),
+ SMART_DAT(0x01),
+ SMART_DELAY(1),
+
+ SMART_CMD(0x00),
+ SMART_CMD(0x07),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_DELAY(1),
+};
+
+static uint16_t lcd_power_off[] = {
+ SMART_CMD(0x00),
+ SMART_CMD(0x10),
+ SMART_DAT(0x00),
+ SMART_DAT(0x80),
+
+ SMART_CMD(0x00),
+ SMART_CMD(0x11),
+ SMART_DAT(0x01),
+ SMART_DAT(0x60),
+
+ SMART_CMD(0x00),
+ SMART_CMD(0x12),
+ SMART_DAT(0x01),
+ SMART_DAT(0xAE),
+ SMART_DELAY(40),
+
+ SMART_CMD(0x00),
+ SMART_CMD(0x10),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+};
+
+static uint16_t update_framedata[] = {
+ /* set display ram: 240*320 */
+ SMART_CMD(0x00), /* RAM address set(H) 0*/
+ SMART_CMD(0x20),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00), /* RAM address set(V) 4*/
+ SMART_CMD(0x21),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00), /* Start of Window RAM address set(H) 8 */
+ SMART_CMD(0x50),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00), /* End of Window RAM address set(H) 12 */
+ SMART_CMD(0x51),
+ SMART_DAT(0x00),
+ SMART_DAT(0xEF),
+ SMART_CMD(0x00), /* Start of Window RAM address set(V) 16 */
+ SMART_CMD(0x52),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00), /* End of Window RAM address set(V) 20 */
+ SMART_CMD(0x53),
+ SMART_DAT(0x01),
+ SMART_DAT(0x3F),
+
+ /* wait for vsync cmd before transferring frame data */
+ SMART_CMD_WAIT_FOR_VSYNC,
+
+ /* write ram */
+ SMART_CMD(0x00),
+ SMART_CMD(0x22),
+
+ /* write frame data */
+ SMART_CMD_WRITE_FRAME,
+};
+
+static void ltm022a97a_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+ static int pin_requested = 0;
+ struct fb_info *info = container_of(var, struct fb_info, var);
+ int err;
+
+ if (!pin_requested) {
+ err = gpio_request(GPIO_LCD_RESET, "lcd reset");
+ if (err) {
+ pr_err("failed to request gpio for LCD reset\n");
+ return;
+ }
+
+ gpio_direction_output(GPIO_LCD_RESET, 0);
+ pin_requested = 1;
+ }
+
+ if (on) {
+ gpio_set_value(GPIO_LCD_RESET, 0); msleep(100);
+ gpio_set_value(GPIO_LCD_RESET, 1); msleep(10);
+
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_on));
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_on));
+ } else {
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_off));
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_off));
+ }
+
+ err = pxafb_smart_flush(info);
+ if (err)
+ pr_err("%s: timed out\n", __func__);
+}
+
+static void ltm022a97a_update(struct fb_info *info)
+{
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
+ pxafb_smart_flush(info);
+}
+
+static struct pxafb_mode_info toshiba_ltm022a97a_modes[] = {
+ [0] = {
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .a0csrd_set_hld = 30,
+ .a0cswr_set_hld = 30,
+ .wr_pulse_width = 30,
+ .rd_pulse_width = 30,
+ .op_hold_time = 30,
+ .cmd_inh_time = 60,
+
+ /* L_LCLK_A0 and L_LCLK_RD active low */
+ .sync = FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT,
+ },
+};
+
+static struct pxafb_mach_info saar_lcd_info = {
+ .modes = toshiba_ltm022a97a_modes,
+ .num_modes = 1,
+ .lcd_conn = LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_lcd_power = ltm022a97a_lcd_power,
+ .smart_update = ltm022a97a_update,
+};
+
+static void __init saar_init_lcd(void)
+{
+ pxa_set_fb_info(NULL, &saar_lcd_info);
+}
+#else
+static inline void saar_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct da9034_backlight_pdata saar_da9034_backlight = {
+ .output_current = 4, /* 4mA */
+};
+
+static struct da903x_subdev_info saar_da9034_subdevs[] = {
+ [0] = {
+ .name = "da903x-backlight",
+ .id = DA9034_ID_WLED,
+ .platform_data = &saar_da9034_backlight,
+ },
+};
+
+static struct da903x_platform_data saar_da9034_info = {
+ .num_subdevs = ARRAY_SIZE(saar_da9034_subdevs),
+ .subdevs = saar_da9034_subdevs,
+};
+
+static struct i2c_board_info saar_i2c_info[] = {
+ [0] = {
+ .type = "da9034",
+ .addr = 0x34,
+ .platform_data = &saar_da9034_info,
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
+ },
+};
+
+static void __init saar_init_i2c(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(saar_i2c_info));
+}
+#else
+static inline void saar_init_i2c(void) {}
+#endif
+
+#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
+static struct mtd_partition saar_onenand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_8M,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (SZ_2M + SZ_1M),
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_32M + SZ_16M,
+ .mask_flags = 0,
+ }
+};
+
+static struct onenand_platform_data saar_onenand_info = {
+ .parts = saar_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(saar_onenand_partitions),
+};
+
+#define SMC_CS0_PHYS_BASE (0x10000000)
+
+static struct resource saar_resource_onenand[] = {
+ [0] = {
+ .start = SMC_CS0_PHYS_BASE,
+ .end = SMC_CS0_PHYS_BASE + SZ_1M,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device saar_device_onenand = {
+ .name = "onenand-flash",
+ .id = -1,
+ .dev = {
+ .platform_data = &saar_onenand_info,
+ },
+ .resource = saar_resource_onenand,
+ .num_resources = ARRAY_SIZE(saar_resource_onenand),
+};
+
+static void __init saar_init_onenand(void)
+{
+ platform_device_register(&saar_device_onenand);
+}
+#else
+static void __init saar_init_onenand(void) {}
+#endif
+
+static void __init saar_init(void)
+{
+ /* initialize MFP configurations */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ platform_device_register(&smc91x_device);
+ saar_init_onenand();
+
+ saar_init_i2c();
+ saar_init_lcd();
+}
+
+MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
+ /* Maintainer: Eric Miao <eric.miao@marvell.com> */
+ .atag_offset = 0x100,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = saar_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
new file mode 100644
index 0000000..ef9fd9b
--- /dev/null
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -0,0 +1,953 @@
+/*
+ * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
+ * series of PDAs
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on code written by Sharp for 2.4 kernels
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/apm-emulation.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/suspend.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include "pm.h"
+#include <mach/pxa2xx-regs.h>
+#include "regs-rtc.h"
+#include "sharpsl_pm.h"
+
+/*
+ * Constants
+ */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */
+#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
+#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
+#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
+
+#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
+#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */
+#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */
+#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
+#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
+
+/*
+ * Prototypes
+ */
+#ifdef CONFIG_PM
+static int sharpsl_off_charge_battery(void);
+static int sharpsl_check_battery_voltage(void);
+#endif
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_ac_check(void);
+static int sharpsl_average_value(int ad);
+static void sharpsl_average_clear(void);
+static void sharpsl_charge_toggle(struct work_struct *private_);
+static void sharpsl_battery_thread(struct work_struct *private_);
+
+
+/*
+ * Variables
+ */
+struct sharpsl_pm_status sharpsl_pm;
+static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
+static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
+DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
+
+
+
+struct battery_thresh sharpsl_battery_levels_acin[] = {
+ { 213, 100},
+ { 212, 98},
+ { 211, 95},
+ { 210, 93},
+ { 209, 90},
+ { 208, 88},
+ { 207, 85},
+ { 206, 83},
+ { 205, 80},
+ { 204, 78},
+ { 203, 75},
+ { 202, 73},
+ { 201, 70},
+ { 200, 68},
+ { 199, 65},
+ { 198, 63},
+ { 197, 60},
+ { 196, 58},
+ { 195, 55},
+ { 194, 53},
+ { 193, 50},
+ { 192, 48},
+ { 192, 45},
+ { 191, 43},
+ { 191, 40},
+ { 190, 38},
+ { 190, 35},
+ { 189, 33},
+ { 188, 30},
+ { 187, 28},
+ { 186, 25},
+ { 185, 23},
+ { 184, 20},
+ { 183, 18},
+ { 182, 15},
+ { 181, 13},
+ { 180, 10},
+ { 179, 8},
+ { 178, 5},
+ { 0, 0},
+};
+
+struct battery_thresh sharpsl_battery_levels_noac[] = {
+ { 213, 100},
+ { 212, 98},
+ { 211, 95},
+ { 210, 93},
+ { 209, 90},
+ { 208, 88},
+ { 207, 85},
+ { 206, 83},
+ { 205, 80},
+ { 204, 78},
+ { 203, 75},
+ { 202, 73},
+ { 201, 70},
+ { 200, 68},
+ { 199, 65},
+ { 198, 63},
+ { 197, 60},
+ { 196, 58},
+ { 195, 55},
+ { 194, 53},
+ { 193, 50},
+ { 192, 48},
+ { 191, 45},
+ { 190, 43},
+ { 189, 40},
+ { 188, 38},
+ { 187, 35},
+ { 186, 33},
+ { 185, 30},
+ { 184, 28},
+ { 183, 25},
+ { 182, 23},
+ { 181, 20},
+ { 180, 18},
+ { 179, 15},
+ { 178, 13},
+ { 177, 10},
+ { 176, 8},
+ { 175, 5},
+ { 0, 0},
+};
+
+/* MAX1111 Commands */
+#define MAXCTRL_PD0 (1u << 0)
+#define MAXCTRL_PD1 (1u << 1)
+#define MAXCTRL_SGL (1u << 2)
+#define MAXCTRL_UNI (1u << 3)
+#define MAXCTRL_SEL_SH 4
+#define MAXCTRL_STR (1u << 7)
+
+extern int max1111_read_channel(int);
+/*
+ * Read MAX1111 ADC
+ */
+int sharpsl_pm_pxa_read_max1111(int channel)
+{
+ /* Ugly, better move this function into another module */
+ if (machine_is_tosa())
+ return 0;
+
+ /* max1111 accepts channels from 0-3, however,
+ * it is encoded from 0-7 here in the code.
+ */
+ return max1111_read_channel(channel >> 1);
+}
+
+static int get_percentage(int voltage)
+{
+ int i = sharpsl_pm.machinfo->bat_levels - 1;
+ int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
+ struct battery_thresh *thresh;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
+ else
+ thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
+
+ while (i > 0 && (voltage > thresh[i].voltage))
+ i--;
+
+ return thresh[i].percentage;
+}
+
+static int get_apm_status(int voltage)
+{
+ int low_thresh, high_thresh;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON) {
+ high_thresh = sharpsl_pm.machinfo->status_high_acin;
+ low_thresh = sharpsl_pm.machinfo->status_low_acin;
+ } else {
+ high_thresh = sharpsl_pm.machinfo->status_high_noac;
+ low_thresh = sharpsl_pm.machinfo->status_low_noac;
+ }
+
+ if (voltage >= high_thresh)
+ return APM_BATTERY_STATUS_HIGH;
+ if (voltage >= low_thresh)
+ return APM_BATTERY_STATUS_LOW;
+ return APM_BATTERY_STATUS_CRITICAL;
+}
+
+void sharpsl_battery_kick(void)
+{
+ schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+}
+EXPORT_SYMBOL(sharpsl_battery_kick);
+
+
+static void sharpsl_battery_thread(struct work_struct *private_)
+{
+ int voltage, percent, apm_status, i;
+
+ if (!sharpsl_pm.machinfo)
+ return;
+
+ sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
+
+ /* Corgi cannot confirm when battery fully charged so periodically kick! */
+ if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
+ && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
+ schedule_delayed_work(&toggle_charger, 0);
+
+ for (i = 0; i < 5; i++) {
+ voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+ if (voltage > 0)
+ break;
+ }
+ if (voltage <= 0) {
+ voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+ dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+ }
+
+ voltage = sharpsl_average_value(voltage);
+ apm_status = get_apm_status(voltage);
+ percent = get_percentage(voltage);
+
+ /* At low battery voltages, the voltage has a tendency to start
+ creeping back up so we try to avoid this here */
+ if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
+ || (apm_status == APM_BATTERY_STATUS_HIGH)
+ || percent <= sharpsl_pm.battstat.mainbat_percent) {
+ sharpsl_pm.battstat.mainbat_voltage = voltage;
+ sharpsl_pm.battstat.mainbat_status = apm_status;
+ sharpsl_pm.battstat.mainbat_percent = percent;
+ }
+
+ dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
+ sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+
+ /* Suspend if critical battery level */
+ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+ && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+ && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+ sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+ dev_err(sharpsl_pm.dev, "Fatal Off\n");
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+ }
+
+ schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
+}
+
+void sharpsl_pm_led(int val)
+{
+ if (val == SHARPSL_LED_ERROR) {
+ dev_err(sharpsl_pm.dev, "Charging Error!\n");
+ } else if (val == SHARPSL_LED_ON) {
+ dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
+ led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
+ } else {
+ dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
+ led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
+ }
+}
+
+static void sharpsl_charge_on(void)
+{
+ dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
+
+ sharpsl_pm.full_count = 0;
+ sharpsl_pm.charge_mode = CHRG_ON;
+ schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
+ schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
+}
+
+static void sharpsl_charge_off(void)
+{
+ dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
+
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm_led(SHARPSL_LED_OFF);
+ sharpsl_pm.charge_mode = CHRG_OFF;
+
+ schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+static void sharpsl_charge_error(void)
+{
+ sharpsl_pm_led(SHARPSL_LED_ERROR);
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm.charge_mode = CHRG_ERROR;
+}
+
+static void sharpsl_charge_toggle(struct work_struct *private_)
+{
+ dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+ sharpsl_charge_off();
+ return;
+ } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
+ sharpsl_charge_error();
+ return;
+ }
+
+ sharpsl_pm_led(SHARPSL_LED_ON);
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+
+ sharpsl_pm.charge_start_time = jiffies;
+}
+
+static void sharpsl_ac_timer(struct timer_list *unused)
+{
+ int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+ dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
+
+ sharpsl_average_clear();
+ if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
+ sharpsl_charge_on();
+ else if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_charge_off();
+
+ schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+
+static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
+{
+ /* Delay the event slightly to debounce */
+ /* Must be a smaller delay than the chrg_full_isr below */
+ mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+ return IRQ_HANDLED;
+}
+
+static void sharpsl_chrg_full_timer(struct timer_list *unused)
+{
+ dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
+
+ sharpsl_pm.full_count++;
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_charge_off();
+ } else if (sharpsl_pm.full_count < 2) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
+ schedule_delayed_work(&toggle_charger, 0);
+ } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
+ schedule_delayed_work(&toggle_charger, 0);
+ } else {
+ sharpsl_charge_off();
+ sharpsl_pm.charge_mode = CHRG_DONE;
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
+ }
+}
+
+/* Charging Finished Interrupt (Not present on Corgi) */
+/* Can trigger at the same time as an AC status change so
+ delay until after that has been processed */
+static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
+{
+ if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
+ return IRQ_HANDLED;
+
+ /* delay until after any ac interrupt */
+ mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
+{
+ int is_fatal = 0;
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
+ dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
+ is_fatal = 1;
+ }
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
+ dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
+ is_fatal = 1;
+ }
+
+ if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
+ sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Maintain an average of the last 10 readings
+ */
+#define SHARPSL_CNV_VALUE_NUM 10
+static int sharpsl_ad_index;
+
+static void sharpsl_average_clear(void)
+{
+ sharpsl_ad_index = 0;
+}
+
+static int sharpsl_average_value(int ad)
+{
+ int i, ad_val = 0;
+ static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
+
+ if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
+ sharpsl_ad_index = 0;
+ return ad;
+ }
+
+ sharpsl_ad[sharpsl_ad_index] = ad;
+ sharpsl_ad_index++;
+ if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
+ for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+ sharpsl_ad[i] = sharpsl_ad[i+1];
+ sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
+ }
+ for (i = 0; i < sharpsl_ad_index; i++)
+ ad_val += sharpsl_ad[i];
+
+ return ad_val / sharpsl_ad_index;
+}
+
+/*
+ * Take an array of 5 integers, remove the maximum and minimum values
+ * and return the average.
+ */
+static int get_select_val(int *val)
+{
+ int i, j, k, temp, sum = 0;
+
+ /* Find MAX val */
+ temp = val[0];
+ j = 0;
+ for (i = 1; i < 5; i++) {
+ if (temp < val[i]) {
+ temp = val[i];
+ j = i;
+ }
+ }
+
+ /* Find MIN val */
+ temp = val[4];
+ k = 4;
+ for (i = 3; i >= 0; i--) {
+ if (temp > val[i]) {
+ temp = val[i];
+ k = i;
+ }
+ }
+
+ for (i = 0; i < 5; i++)
+ if (i != j && i != k)
+ sum += val[i];
+
+ dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
+
+ return sum/3;
+}
+
+static int sharpsl_check_battery_temp(void)
+{
+ int val, i, buff[5];
+
+ /* Check battery temperature */
+ for (i = 0; i < 5; i++) {
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+ sharpsl_pm.machinfo->measure_temp(1);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
+ sharpsl_pm.machinfo->measure_temp(0);
+ }
+
+ val = get_select_val(buff);
+
+ dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
+ if (val > sharpsl_pm.machinfo->charge_on_temp) {
+ printk(KERN_WARNING "Not charging: temperature out of limits.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_check_battery_voltage(void)
+{
+ int val, i, buff[5];
+
+ /* disable charge, enable discharge */
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm.machinfo->discharge(1);
+ mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(1);
+
+ /* Check battery voltage */
+ for (i = 0; i < 5; i++) {
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+ }
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(0);
+
+ sharpsl_pm.machinfo->discharge(0);
+
+ val = get_select_val(buff);
+ dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
+
+ if (val < sharpsl_pm.machinfo->charge_on_volt)
+ return -1;
+
+ return 0;
+}
+#endif
+
+static int sharpsl_ac_check(void)
+{
+ int temp, i, buff[5];
+
+ for (i = 0; i < 5; i++) {
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
+ }
+
+ temp = get_select_val(buff);
+ dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
+
+ if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
+ dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
+ return -1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ sharpsl_pm.flags |= SHARPSL_SUSPENDED;
+ flush_delayed_work(&toggle_charger);
+ flush_delayed_work(&sharpsl_bat);
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+ else
+ sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+
+ return 0;
+}
+
+static int sharpsl_pm_resume(struct platform_device *pdev)
+{
+ /* Clear the reset source indicators as they break the bootloader upon reboot */
+ RCSR = 0x0f;
+ sharpsl_average_clear();
+ sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
+ sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
+
+ return 0;
+}
+
+static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+ dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+ /* not charging and AC-IN! */
+
+ if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
+ dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
+ sharpsl_pm.charge_mode = CHRG_OFF;
+ sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+ sharpsl_off_charge_battery();
+ }
+
+ sharpsl_pm.machinfo->presuspend();
+
+ PEDR = 0xffffffff; /* clear it */
+
+ sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
+ if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
+ RTSR &= RTSR_ALE;
+ RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
+ dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
+ sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
+ } else if (alarm_enable) {
+ RTSR &= RTSR_ALE;
+ RTAR = alarm_time;
+ dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
+ } else {
+ dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
+ }
+
+ pxa_pm_enter(state);
+
+ sharpsl_pm.machinfo->postsuspend();
+
+ dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
+}
+
+static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+ if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
+ if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
+ dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+ if (sharpsl_off_charge_battery()) {
+ dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+ dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
+ }
+
+ if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
+ (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL))) {
+ dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int corgi_pxa_pm_enter(suspend_state_t state)
+{
+ unsigned long alarm_time = RTAR;
+ unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
+
+ dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
+
+ corgi_goto_sleep(alarm_time, alarm_status, state);
+
+ while (corgi_enter_suspend(alarm_time, alarm_status, state))
+ {}
+
+ if (sharpsl_pm.machinfo->earlyresume)
+ sharpsl_pm.machinfo->earlyresume();
+
+ dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+
+ return 0;
+}
+
+static int sharpsl_off_charge_error(void)
+{
+ dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm_led(SHARPSL_LED_ERROR);
+ sharpsl_pm.charge_mode = CHRG_ERROR;
+ return 1;
+}
+
+/*
+ * Charging Control while suspended
+ * Return 1 - go straight to sleep
+ * Return 0 - sleep or wakeup depending on other factors
+ */
+static int sharpsl_off_charge_battery(void)
+{
+ int time;
+
+ dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
+
+ if (sharpsl_pm.charge_mode == CHRG_OFF) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+ /* AC Check */
+ if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
+ return sharpsl_off_charge_error();
+
+ /* Start Charging */
+ sharpsl_pm_led(SHARPSL_LED_ON);
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+
+ sharpsl_pm.charge_mode = CHRG_ON;
+ sharpsl_pm.full_count = 0;
+
+ return 1;
+ } else if (sharpsl_pm.charge_mode != CHRG_ON) {
+ return 1;
+ }
+
+ if (sharpsl_pm.full_count == 0) {
+ int time;
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
+ if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
+ return sharpsl_off_charge_error();
+
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+ sharpsl_pm.charge_mode = CHRG_ON;
+
+ mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+ time = RCNR;
+ while (1) {
+ /* Check if any wakeup event had occurred */
+ if (sharpsl_pm.machinfo->charger_wakeup())
+ return 0;
+ /* Check for timeout */
+ if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
+ return 1;
+ if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
+ sharpsl_pm.full_count++;
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+ return 1;
+ }
+ }
+ }
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
+
+ mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+ time = RCNR;
+ while (1) {
+ /* Check if any wakeup event had occurred */
+ if (sharpsl_pm.machinfo->charger_wakeup())
+ return 0;
+ /* Check for timeout */
+ if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
+ if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
+ sharpsl_pm.full_count = 0;
+ }
+ sharpsl_pm.full_count++;
+ return 1;
+ }
+ if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
+ sharpsl_pm_led(SHARPSL_LED_OFF);
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm.charge_mode = CHRG_DONE;
+ return 1;
+ }
+ }
+}
+#else
+#define sharpsl_pm_suspend NULL
+#define sharpsl_pm_resume NULL
+#endif
+
+static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
+}
+
+static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
+}
+
+static DEVICE_ATTR_RO(battery_percentage);
+static DEVICE_ATTR_RO(battery_voltage);
+
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+{
+ info->ac_line_status = sharpsl_pm.battstat.ac_status;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ info->battery_status = APM_BATTERY_STATUS_CHARGING;
+ else
+ info->battery_status = sharpsl_pm.battstat.mainbat_status;
+
+ info->battery_flag = (1 << info->battery_status);
+ info->battery_life = sharpsl_pm.battstat.mainbat_percent;
+}
+
+#ifdef CONFIG_PM
+static const struct platform_suspend_ops sharpsl_pm_ops = {
+ .prepare = pxa_pm_prepare,
+ .finish = pxa_pm_finish,
+ .enter = corgi_pxa_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+#endif
+
+static int sharpsl_pm_probe(struct platform_device *pdev)
+{
+ int ret, irq;
+
+ if (!pdev->dev.platform_data)
+ return -EINVAL;
+
+ sharpsl_pm.dev = &pdev->dev;
+ sharpsl_pm.machinfo = pdev->dev.platform_data;
+ sharpsl_pm.charge_mode = CHRG_OFF;
+ sharpsl_pm.flags = 0;
+
+ timer_setup(&sharpsl_pm.ac_timer, sharpsl_ac_timer, 0);
+
+ timer_setup(&sharpsl_pm.chrg_full_timer, sharpsl_chrg_full_timer, 0);
+
+ led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
+
+ sharpsl_pm.machinfo->init();
+
+ gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
+ gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
+ gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
+ gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
+ gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
+ gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
+
+ /* Register interrupt handlers */
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_acin);
+ if (request_irq(irq, sharpsl_ac_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
+ }
+
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock);
+ if (request_irq(irq, sharpsl_fatal_isr, IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
+ }
+
+ if (sharpsl_pm.machinfo->gpio_fatal) {
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal);
+ if (request_irq(irq, sharpsl_fatal_isr, IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
+ }
+ }
+
+ if (sharpsl_pm.machinfo->batfull_irq) {
+ /* Register interrupt handler. */
+ irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull);
+ if (request_irq(irq, sharpsl_chrg_full_isr, IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
+ }
+ }
+
+ ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
+ ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
+ if (ret != 0)
+ dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
+
+ apm_get_power_status = sharpsl_apm_get_power_status;
+
+#ifdef CONFIG_PM
+ suspend_set_ops(&sharpsl_pm_ops);
+#endif
+
+ mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+ return 0;
+}
+
+static int sharpsl_pm_remove(struct platform_device *pdev)
+{
+ suspend_set_ops(NULL);
+
+ device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
+ device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+
+ led_trigger_unregister_simple(sharpsl_charge_led_trigger);
+
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+
+ if (sharpsl_pm.machinfo->gpio_fatal)
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+
+ if (sharpsl_pm.machinfo->batfull_irq)
+ free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+
+ gpio_free(sharpsl_pm.machinfo->gpio_batlock);
+ gpio_free(sharpsl_pm.machinfo->gpio_batfull);
+ gpio_free(sharpsl_pm.machinfo->gpio_acin);
+
+ if (sharpsl_pm.machinfo->exit)
+ sharpsl_pm.machinfo->exit();
+
+ del_timer_sync(&sharpsl_pm.chrg_full_timer);
+ del_timer_sync(&sharpsl_pm.ac_timer);
+
+ return 0;
+}
+
+static struct platform_driver sharpsl_pm_driver = {
+ .probe = sharpsl_pm_probe,
+ .remove = sharpsl_pm_remove,
+ .suspend = sharpsl_pm_suspend,
+ .resume = sharpsl_pm_resume,
+ .driver = {
+ .name = "sharpsl-pm",
+ },
+};
+
+static int sharpsl_pm_init(void)
+{
+ return platform_driver_register(&sharpsl_pm_driver);
+}
+
+static void sharpsl_pm_exit(void)
+{
+ platform_driver_unregister(&sharpsl_pm_driver);
+}
+
+late_initcall(sharpsl_pm_init);
+module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/mach-pxa/sharpsl_pm.h b/arch/arm/mach-pxa/sharpsl_pm.h
new file mode 100644
index 0000000..fa75b6d
--- /dev/null
+++ b/arch/arm/mach-pxa/sharpsl_pm.h
@@ -0,0 +1,113 @@
+/*
+ * SharpSL Battery/PM Driver
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _MACH_SHARPSL_PM
+#define _MACH_SHARPSL_PM
+
+struct sharpsl_charger_machinfo {
+ void (*init)(void);
+ void (*exit)(void);
+ int gpio_acin;
+ int gpio_batfull;
+ int batfull_irq;
+ int gpio_batlock;
+ int gpio_fatal;
+ void (*discharge)(int);
+ void (*discharge1)(int);
+ void (*charge)(int);
+ void (*measure_temp)(int);
+ void (*presuspend)(void);
+ void (*postsuspend)(void);
+ void (*earlyresume)(void);
+ unsigned long (*read_devdata)(int);
+#define SHARPSL_BATT_VOLT 1
+#define SHARPSL_BATT_TEMP 2
+#define SHARPSL_ACIN_VOLT 3
+#define SHARPSL_STATUS_ACIN 4
+#define SHARPSL_STATUS_LOCK 5
+#define SHARPSL_STATUS_CHRGFULL 6
+#define SHARPSL_STATUS_FATAL 7
+ bool (*charger_wakeup)(void);
+ int (*should_wakeup)(unsigned int resume_on_alarm);
+ void (*backlight_limit)(int);
+ int (*backlight_get_status) (void);
+ int charge_on_volt;
+ int charge_on_temp;
+ int charge_acin_high;
+ int charge_acin_low;
+ int fatal_acin_volt;
+ int fatal_noacin_volt;
+ int bat_levels;
+ struct battery_thresh *bat_levels_noac;
+ struct battery_thresh *bat_levels_acin;
+ struct battery_thresh *bat_levels_noac_bl;
+ struct battery_thresh *bat_levels_acin_bl;
+ int status_high_acin;
+ int status_low_acin;
+ int status_high_noac;
+ int status_low_noac;
+};
+
+struct battery_thresh {
+ int voltage;
+ int percentage;
+};
+
+struct battery_stat {
+ int ac_status; /* APM AC Present/Not Present */
+ int mainbat_status; /* APM Main Battery Status */
+ int mainbat_percent; /* Main Battery Percentage Charge */
+ int mainbat_voltage; /* Main Battery Voltage */
+};
+
+struct sharpsl_pm_status {
+ struct device *dev;
+ struct timer_list ac_timer;
+ struct timer_list chrg_full_timer;
+
+ int charge_mode;
+#define CHRG_ERROR (-1)
+#define CHRG_OFF (0)
+#define CHRG_ON (1)
+#define CHRG_DONE (2)
+
+ unsigned int flags;
+#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */
+#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */
+#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */
+#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */
+#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */
+
+ int full_count;
+ unsigned long charge_start_time;
+ struct sharpsl_charger_machinfo *machinfo;
+ struct battery_stat battstat;
+};
+
+extern struct sharpsl_pm_status sharpsl_pm;
+
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
+
+#define SHARPSL_LED_ERROR 2
+#define SHARPSL_LED_ON 1
+#define SHARPSL_LED_OFF 0
+
+void sharpsl_battery_kick(void);
+void sharpsl_pm_led(int val);
+
+/* MAX1111 Channel Definitions */
+#define MAX1111_BATT_VOLT 4u
+#define MAX1111_BATT_TEMP 2u
+#define MAX1111_ACIN_VOLT 6u
+int sharpsl_pm_pxa_read_max1111(int channel);
+
+void corgi_lcd_limit_intensity(int limit);
+#endif
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
new file mode 100644
index 0000000..6c5b3ff
--- /dev/null
+++ b/arch/arm/mach-pxa/sleep.S
@@ -0,0 +1,171 @@
+/*
+ * Low-level PXA250/210 sleep/wakeUp support
+ *
+ * Initial SA1110 code:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+ *
+ * Adapted for PXA by Nicolas Pitre:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+#include <mach/smemc.h>
+#include <mach/pxa2xx-regs.h>
+
+#define MDREFR_KDIV 0x200a4000 // all banks
+#define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0
+
+ .text
+
+#ifdef CONFIG_PXA3xx
+/*
+ * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4)
+ */
+ENTRY(pxa3xx_finish_suspend)
+ mov r0, #0x06 @ S2D3C4 mode
+ mcr p14, 0, r0, c7, c0, 0 @ enter sleep
+
+20: b 20b @ waiting for sleep
+#endif /* CONFIG_PXA3xx */
+
+#ifdef CONFIG_PXA27x
+/*
+ * pxa27x_finish_suspend()
+ *
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
+ */
+ENTRY(pxa27x_finish_suspend)
+ @ Put the processor to sleep
+ @ (also workaround for sighting 28071)
+
+ @ prepare value for sleep mode
+ mov r1, r0 @ sleep mode
+
+ @ prepare pointer to physical address 0 (virtual mapping in generic.c)
+ mov r2, #UNCACHED_PHYS_0
+
+ @ prepare SDRAM refresh settings
+ ldr r4, =MDREFR
+ ldr r5, [r4]
+
+ @ enable SDRAM self-refresh mode
+ orr r5, r5, #MDREFR_SLFRSH
+
+ @ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
+ ldr r6, =MDREFR_KDIV
+ orr r5, r5, r6
+
+ @ Intel PXA270 Specification Update notes problems sleeping
+ @ with core operating above 91 MHz
+ @ (see Errata 50, ...processor does not exit from sleep...)
+
+ ldr r6, =CCCR
+ ldr r8, [r6] @ keep original value for resume
+
+ ldr r7, =CCCR_SLEEP @ prepare CCCR sleep value
+ mov r0, #0x2 @ prepare value for CLKCFG
+
+ @ align execution to a cache line
+ b pxa_cpu_do_suspend
+#endif
+
+#ifdef CONFIG_PXA25x
+/*
+ * pxa25x_finish_suspend()
+ *
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
+ */
+
+ENTRY(pxa25x_finish_suspend)
+ @ prepare value for sleep mode
+ mov r1, r0 @ sleep mode
+
+ @ prepare pointer to physical address 0 (virtual mapping in generic.c)
+ mov r2, #UNCACHED_PHYS_0
+
+ @ prepare SDRAM refresh settings
+ ldr r4, =MDREFR
+ ldr r5, [r4]
+
+ @ enable SDRAM self-refresh mode
+ orr r5, r5, #MDREFR_SLFRSH
+
+ @ Intel PXA255 Specification Update notes problems
+ @ about suspending with PXBus operating above 133MHz
+ @ (see Errata 31, GPIO output signals, ... unpredictable in sleep
+ @
+ @ We keep the change-down close to the actual suspend on SDRAM
+ @ as possible to eliminate messing about with the refresh clock
+ @ as the system will restore with the original speed settings
+ @
+ @ Ben Dooks, 13-Sep-2004
+
+ ldr r6, =CCCR
+ ldr r8, [r6] @ keep original value for resume
+
+ @ ensure x1 for run and turbo mode with memory clock
+ bic r7, r8, #CCCR_M_MASK | CCCR_N_MASK
+ orr r7, r7, #(1<<5) | (2<<7)
+
+ @ check that the memory frequency is within limits
+ and r14, r7, #CCCR_L_MASK
+ teq r14, #1
+ bicne r7, r7, #CCCR_L_MASK
+ orrne r7, r7, #1 @@ 99.53MHz
+
+ @ get ready for the change
+
+ @ note, turbo is not preserved over sleep so there is no
+ @ point in preserving it here. we save it on the stack with the
+ @ other CP registers instead.
+ mov r0, #0
+ mcr p14, 0, r0, c6, c0, 0
+ orr r0, r0, #2 @ initiate change bit
+ b pxa_cpu_do_suspend
+#endif
+
+ .ltorg
+ .align 5
+pxa_cpu_do_suspend:
+
+ @ All needed values are now in registers.
+ @ These last instructions should be in cache
+
+ @ initiate the frequency change...
+ str r7, [r6]
+ mcr p14, 0, r0, c6, c0, 0
+
+ @ restore the original cpu speed value for resume
+ str r8, [r6]
+
+ @ need 6 13-MHz cycles before changing PWRMODE
+ @ just set frequency to 91-MHz... 6*91/13 = 42
+
+ mov r0, #42
+10: subs r0, r0, #1
+ bne 10b
+
+ @ Do not reorder...
+ @ Intel PXA270 Specification Update notes problems performing
+ @ external accesses after SDRAM is put in self-refresh mode
+ @ (see Errata 38 ...hangs when entering self-refresh mode)
+
+ @ force address lines low by reading at physical address 0
+ ldr r3, [r2]
+
+ @ put SDRAM into self-refresh
+ str r5, [r4]
+
+ @ enter sleep mode
+ mcr p14, 0, r1, c7, c0, 0 @ PWRMODE
+
+20: b 20b @ loop waiting for sleep
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
new file mode 100644
index 0000000..32e82cc
--- /dev/null
+++ b/arch/arm/mach-pxa/smemc.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Static Memory Controller
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <mach/hardware.h>
+#include <mach/smemc.h>
+
+#ifdef CONFIG_PM
+static unsigned long msc[2];
+static unsigned long sxcnfg, memclkcfg;
+static unsigned long csadrcfg[4];
+
+static int pxa3xx_smemc_suspend(void)
+{
+ msc[0] = __raw_readl(MSC0);
+ msc[1] = __raw_readl(MSC1);
+ sxcnfg = __raw_readl(SXCNFG);
+ memclkcfg = __raw_readl(MEMCLKCFG);
+ csadrcfg[0] = __raw_readl(CSADRCFG0);
+ csadrcfg[1] = __raw_readl(CSADRCFG1);
+ csadrcfg[2] = __raw_readl(CSADRCFG2);
+ csadrcfg[3] = __raw_readl(CSADRCFG3);
+
+ return 0;
+}
+
+static void pxa3xx_smemc_resume(void)
+{
+ __raw_writel(msc[0], MSC0);
+ __raw_writel(msc[1], MSC1);
+ __raw_writel(sxcnfg, SXCNFG);
+ __raw_writel(memclkcfg, MEMCLKCFG);
+ __raw_writel(csadrcfg[0], CSADRCFG0);
+ __raw_writel(csadrcfg[1], CSADRCFG1);
+ __raw_writel(csadrcfg[2], CSADRCFG2);
+ __raw_writel(csadrcfg[3], CSADRCFG3);
+ /* CSMSADRCFG wakes up in its default state (0), so we need to set it */
+ __raw_writel(0x2, CSMSADRCFG);
+}
+
+static struct syscore_ops smemc_syscore_ops = {
+ .suspend = pxa3xx_smemc_suspend,
+ .resume = pxa3xx_smemc_resume,
+};
+
+static int __init smemc_init(void)
+{
+ if (cpu_is_pxa3xx()) {
+ /*
+ * The only documentation we have on the
+ * Chip Select Configuration Register (CSMSADRCFG) is that
+ * it must be programmed to 0x2.
+ * Moreover, in the bit definitions, the second bit
+ * (CSMSADRCFG[1]) is called "SETALWAYS".
+ * Other bits are reserved in this register.
+ */
+ __raw_writel(0x2, CSMSADRCFG);
+
+ register_syscore_ops(&smemc_syscore_ops);
+ }
+
+ return 0;
+}
+subsys_initcall(smemc_init);
+#endif
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
new file mode 100644
index 0000000..5d50025
--- /dev/null
+++ b/arch/arm/mach-pxa/spitz.c
@@ -0,0 +1,1048 @@
+/*
+ * Support for Sharp SL-Cxx00 Series of PDAs
+ * Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi)
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches/lubbock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h> /* symbol_get ; symbol_put */
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/mtd/sharpsl.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/regulator/machine.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+#include <linux/memblock.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/scoop.h>
+
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
+#include <mach/reset.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <mach/spitz.h>
+#include "sharpsl_pm.h"
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long spitz_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO78_nCS_2, /* SCOOP #2 */
+ GPIO79_nCS_3, /* NAND */
+ GPIO80_nCS_4, /* SCOOP #1 */
+
+ /* LCD - 16bpp Active TFT */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO104_PSKTSEL,
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ /* GPIOs */
+ GPIO9_GPIO, /* SPITZ_GPIO_nSD_DETECT */
+ GPIO16_GPIO, /* SPITZ_GPIO_SYNC */
+ GPIO81_GPIO, /* SPITZ_GPIO_nSD_WP */
+ GPIO41_GPIO, /* SPITZ_GPIO_USB_CONNECT */
+ GPIO37_GPIO, /* SPITZ_GPIO_USB_HOST */
+ GPIO35_GPIO, /* SPITZ_GPIO_USB_DEVICE */
+ GPIO22_GPIO, /* SPITZ_GPIO_HSYNC */
+ GPIO94_GPIO, /* SPITZ_GPIO_CF_CD */
+ GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */
+ GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */
+
+ /* GPIO matrix keypad */
+ GPIO88_GPIO, /* column 0 */
+ GPIO23_GPIO, /* column 1 */
+ GPIO24_GPIO, /* column 2 */
+ GPIO25_GPIO, /* column 3 */
+ GPIO26_GPIO, /* column 4 */
+ GPIO27_GPIO, /* column 5 */
+ GPIO52_GPIO, /* column 6 */
+ GPIO103_GPIO, /* column 7 */
+ GPIO107_GPIO, /* column 8 */
+ GPIO108_GPIO, /* column 9 */
+ GPIO114_GPIO, /* column 10 */
+ GPIO12_GPIO, /* row 0 */
+ GPIO17_GPIO, /* row 1 */
+ GPIO91_GPIO, /* row 2 */
+ GPIO34_GPIO, /* row 3 */
+ GPIO36_GPIO, /* row 4 */
+ GPIO38_GPIO, /* row 5 */
+ GPIO39_GPIO, /* row 6 */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* SPITZ_GPIO_KEY_INT */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */
+};
+
+
+/******************************************************************************
+ * Scoop GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
+/* SCOOP Device #1 */
+static struct resource spitz_scoop_1_resources[] = {
+ [0] = {
+ .start = 0x10800000,
+ .end = 0x10800fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config spitz_scoop_1_setup = {
+ .io_dir = SPITZ_SCP_IO_DIR,
+ .io_out = SPITZ_SCP_IO_OUT,
+ .suspend_clr = SPITZ_SCP_SUS_CLR,
+ .suspend_set = SPITZ_SCP_SUS_SET,
+ .gpio_base = SPITZ_SCP_GPIO_BASE,
+};
+
+struct platform_device spitz_scoop_1_device = {
+ .name = "sharp-scoop",
+ .id = 0,
+ .dev = {
+ .platform_data = &spitz_scoop_1_setup,
+ },
+ .num_resources = ARRAY_SIZE(spitz_scoop_1_resources),
+ .resource = spitz_scoop_1_resources,
+};
+
+/* SCOOP Device #2 */
+static struct resource spitz_scoop_2_resources[] = {
+ [0] = {
+ .start = 0x08800040,
+ .end = 0x08800fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config spitz_scoop_2_setup = {
+ .io_dir = SPITZ_SCP2_IO_DIR,
+ .io_out = SPITZ_SCP2_IO_OUT,
+ .suspend_clr = SPITZ_SCP2_SUS_CLR,
+ .suspend_set = SPITZ_SCP2_SUS_SET,
+ .gpio_base = SPITZ_SCP2_GPIO_BASE,
+};
+
+struct platform_device spitz_scoop_2_device = {
+ .name = "sharp-scoop",
+ .id = 1,
+ .dev = {
+ .platform_data = &spitz_scoop_2_setup,
+ },
+ .num_resources = ARRAY_SIZE(spitz_scoop_2_resources),
+ .resource = spitz_scoop_2_resources,
+};
+
+static void __init spitz_scoop_init(void)
+{
+ platform_device_register(&spitz_scoop_1_device);
+
+ /* Akita doesn't have the second SCOOP chip */
+ if (!machine_is_akita())
+ platform_device_register(&spitz_scoop_2_device);
+}
+
+/* Power control is shared with between one of the CF slots and SD */
+static void __maybe_unused spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
+{
+ unsigned short cpr;
+ unsigned long flags;
+
+ if (new_cpr & 0x7) {
+ gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
+ mdelay(5);
+ }
+
+ local_irq_save(flags);
+
+ cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR);
+
+ if (enable & new_cpr)
+ cpr |= new_cpr;
+ else
+ cpr &= ~enable;
+
+ write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr);
+
+ local_irq_restore(flags);
+
+ if (!(cpr & 0x7)) {
+ mdelay(1);
+ gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
+ }
+}
+
+#else
+static inline void spitz_scoop_init(void) {}
+static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {}
+#endif
+
+/******************************************************************************
+ * PCMCIA
+ ******************************************************************************/
+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
+{
+ /* Only need to override behaviour for slot 0 */
+ if (nr == 0)
+ spitz_card_pwr_ctrl(
+ cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr);
+ else
+ write_scoop_reg(scoop, SCOOP_CPR, cpr);
+}
+
+static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
+ {
+ .dev = &spitz_scoop_1_device.dev,
+ .irq = SPITZ_IRQ_GPIO_CF_IRQ,
+ .cd_irq = SPITZ_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+ }, {
+ .dev = &spitz_scoop_2_device.dev,
+ .irq = SPITZ_IRQ_GPIO_CF2_IRQ,
+ .cd_irq = -1,
+ },
+};
+
+static struct scoop_pcmcia_config spitz_pcmcia_config = {
+ .devs = &spitz_pcmcia_scoop[0],
+ .num_devs = 2,
+ .power_ctrl = spitz_pcmcia_pwr,
+};
+
+static void __init spitz_pcmcia_init(void)
+{
+ /* Akita has only one PCMCIA slot used */
+ if (machine_is_akita())
+ spitz_pcmcia_config.num_devs = 1;
+
+ platform_scoop_config = &spitz_pcmcia_config;
+}
+#else
+static inline void spitz_pcmcia_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
+
+#define SPITZ_KEY_CALENDAR KEY_F1
+#define SPITZ_KEY_ADDRESS KEY_F2
+#define SPITZ_KEY_FN KEY_F3
+#define SPITZ_KEY_CANCEL KEY_F4
+#define SPITZ_KEY_EXOK KEY_F5
+#define SPITZ_KEY_EXCANCEL KEY_F6
+#define SPITZ_KEY_EXJOGDOWN KEY_F7
+#define SPITZ_KEY_EXJOGUP KEY_F8
+#define SPITZ_KEY_JAP1 KEY_LEFTALT
+#define SPITZ_KEY_JAP2 KEY_RIGHTCTRL
+#define SPITZ_KEY_SYNC KEY_F9
+#define SPITZ_KEY_MAIL KEY_F10
+#define SPITZ_KEY_OK KEY_F11
+#define SPITZ_KEY_MENU KEY_F12
+
+static const uint32_t spitz_keymap[] = {
+ KEY(0, 0, KEY_LEFTCTRL),
+ KEY(0, 1, KEY_1),
+ KEY(0, 2, KEY_3),
+ KEY(0, 3, KEY_5),
+ KEY(0, 4, KEY_6),
+ KEY(0, 5, KEY_7),
+ KEY(0, 6, KEY_9),
+ KEY(0, 7, KEY_0),
+ KEY(0, 8, KEY_BACKSPACE),
+ KEY(0, 9, SPITZ_KEY_EXOK), /* EXOK */
+ KEY(0, 10, SPITZ_KEY_EXCANCEL), /* EXCANCEL */
+ KEY(1, 1, KEY_2),
+ KEY(1, 2, KEY_4),
+ KEY(1, 3, KEY_R),
+ KEY(1, 4, KEY_Y),
+ KEY(1, 5, KEY_8),
+ KEY(1, 6, KEY_I),
+ KEY(1, 7, KEY_O),
+ KEY(1, 8, KEY_P),
+ KEY(1, 9, SPITZ_KEY_EXJOGDOWN), /* EXJOGDOWN */
+ KEY(1, 10, SPITZ_KEY_EXJOGUP), /* EXJOGUP */
+ KEY(2, 0, KEY_TAB),
+ KEY(2, 1, KEY_Q),
+ KEY(2, 2, KEY_E),
+ KEY(2, 3, KEY_T),
+ KEY(2, 4, KEY_G),
+ KEY(2, 5, KEY_U),
+ KEY(2, 6, KEY_J),
+ KEY(2, 7, KEY_K),
+ KEY(3, 0, SPITZ_KEY_ADDRESS), /* ADDRESS */
+ KEY(3, 1, KEY_W),
+ KEY(3, 2, KEY_S),
+ KEY(3, 3, KEY_F),
+ KEY(3, 4, KEY_V),
+ KEY(3, 5, KEY_H),
+ KEY(3, 6, KEY_M),
+ KEY(3, 7, KEY_L),
+ KEY(3, 9, KEY_RIGHTSHIFT),
+ KEY(4, 0, SPITZ_KEY_CALENDAR), /* CALENDAR */
+ KEY(4, 1, KEY_A),
+ KEY(4, 2, KEY_D),
+ KEY(4, 3, KEY_C),
+ KEY(4, 4, KEY_B),
+ KEY(4, 5, KEY_N),
+ KEY(4, 6, KEY_DOT),
+ KEY(4, 8, KEY_ENTER),
+ KEY(4, 9, KEY_LEFTSHIFT),
+ KEY(5, 0, SPITZ_KEY_MAIL), /* MAIL */
+ KEY(5, 1, KEY_Z),
+ KEY(5, 2, KEY_X),
+ KEY(5, 3, KEY_MINUS),
+ KEY(5, 4, KEY_SPACE),
+ KEY(5, 5, KEY_COMMA),
+ KEY(5, 7, KEY_UP),
+ KEY(5, 10, SPITZ_KEY_FN), /* FN */
+ KEY(6, 0, KEY_SYSRQ),
+ KEY(6, 1, SPITZ_KEY_JAP1), /* JAP1 */
+ KEY(6, 2, SPITZ_KEY_JAP2), /* JAP2 */
+ KEY(6, 3, SPITZ_KEY_CANCEL), /* CANCEL */
+ KEY(6, 4, SPITZ_KEY_OK), /* OK */
+ KEY(6, 5, SPITZ_KEY_MENU), /* MENU */
+ KEY(6, 6, KEY_LEFT),
+ KEY(6, 7, KEY_DOWN),
+ KEY(6, 8, KEY_RIGHT),
+};
+
+static const struct matrix_keymap_data spitz_keymap_data = {
+ .keymap = spitz_keymap,
+ .keymap_size = ARRAY_SIZE(spitz_keymap),
+};
+
+static const uint32_t spitz_row_gpios[] =
+ { 12, 17, 91, 34, 36, 38, 39 };
+static const uint32_t spitz_col_gpios[] =
+ { 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
+
+static struct matrix_keypad_platform_data spitz_mkp_pdata = {
+ .keymap_data = &spitz_keymap_data,
+ .row_gpios = spitz_row_gpios,
+ .col_gpios = spitz_col_gpios,
+ .num_row_gpios = ARRAY_SIZE(spitz_row_gpios),
+ .num_col_gpios = ARRAY_SIZE(spitz_col_gpios),
+ .col_scan_delay_us = 10,
+ .debounce_ms = 10,
+ .wakeup = 1,
+};
+
+static struct platform_device spitz_mkp_device = {
+ .name = "matrix-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &spitz_mkp_pdata,
+ },
+};
+
+static void __init spitz_mkp_init(void)
+{
+ platform_device_register(&spitz_mkp_device);
+}
+#else
+static inline void spitz_mkp_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button spitz_gpio_keys[] = {
+ {
+ .type = EV_PWR,
+ .code = KEY_SUSPEND,
+ .gpio = SPITZ_GPIO_ON_KEY,
+ .desc = "On Off",
+ .wakeup = 1,
+ },
+ /* Two buttons detecting the lid state */
+ {
+ .type = EV_SW,
+ .code = 0,
+ .gpio = SPITZ_GPIO_SWA,
+ .desc = "Display Down",
+ },
+ {
+ .type = EV_SW,
+ .code = 1,
+ .gpio = SPITZ_GPIO_SWB,
+ .desc = "Lid Closed",
+ },
+};
+
+static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
+ .buttons = spitz_gpio_keys,
+ .nbuttons = ARRAY_SIZE(spitz_gpio_keys),
+};
+
+static struct platform_device spitz_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &spitz_gpio_keys_platform_data,
+ },
+};
+
+static void __init spitz_keys_init(void)
+{
+ platform_device_register(&spitz_gpio_keys_device);
+}
+#else
+static inline void spitz_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led spitz_gpio_leds[] = {
+ {
+ .name = "spitz:amber:charge",
+ .default_trigger = "sharpsl-charge",
+ .gpio = SPITZ_GPIO_LED_ORANGE,
+ },
+ {
+ .name = "spitz:green:hddactivity",
+ .default_trigger = "disk-activity",
+ .gpio = SPITZ_GPIO_LED_GREEN,
+ },
+};
+
+static struct gpio_led_platform_data spitz_gpio_leds_info = {
+ .leds = spitz_gpio_leds,
+ .num_leds = ARRAY_SIZE(spitz_gpio_leds),
+};
+
+static struct platform_device spitz_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &spitz_gpio_leds_info,
+ },
+};
+
+static void __init spitz_leds_init(void)
+{
+ platform_device_register(&spitz_led_device);
+}
+#else
+static inline void spitz_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * SSP Devices
+ ******************************************************************************/
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static void spitz_ads7846_wait_for_hsync(void)
+{
+ while (gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+}
+
+static struct ads7846_platform_data spitz_ads7846_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .pressure_max = 1024,
+ .gpio_pendown = SPITZ_GPIO_TP_INT,
+ .wait_for_sync = spitz_ads7846_wait_for_hsync,
+};
+
+static struct pxa2xx_spi_chip spitz_ads7846_chip = {
+ .gpio_cs = SPITZ_GPIO_ADS7846_CS,
+};
+
+static void spitz_bl_kick_battery(void)
+{
+ void (*kick_batt)(void);
+
+ kick_batt = symbol_get(sharpsl_battery_kick);
+ if (kick_batt) {
+ kick_batt();
+ symbol_put(sharpsl_battery_kick);
+ }
+}
+
+static struct corgi_lcd_platform_data spitz_lcdcon_info = {
+ .init_mode = CORGI_LCD_MODE_VGA,
+ .max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
+ .gpio_backlight_cont = SPITZ_GPIO_BACKLIGHT_CONT,
+ .gpio_backlight_on = SPITZ_GPIO_BACKLIGHT_ON,
+ .kick_battery = spitz_bl_kick_battery,
+};
+
+static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
+ .gpio_cs = SPITZ_GPIO_LCDCON_CS,
+};
+
+static struct pxa2xx_spi_chip spitz_max1111_chip = {
+ .gpio_cs = SPITZ_GPIO_MAX1111_CS,
+};
+
+static struct spi_board_info spitz_spi_devices[] = {
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 1200000,
+ .bus_num = 2,
+ .chip_select = 0,
+ .platform_data = &spitz_ads7846_info,
+ .controller_data = &spitz_ads7846_chip,
+ .irq = PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
+ }, {
+ .modalias = "corgi-lcd",
+ .max_speed_hz = 50000,
+ .bus_num = 2,
+ .chip_select = 1,
+ .platform_data = &spitz_lcdcon_info,
+ .controller_data = &spitz_lcdcon_chip,
+ }, {
+ .modalias = "max1111",
+ .max_speed_hz = 450000,
+ .bus_num = 2,
+ .chip_select = 2,
+ .controller_data = &spitz_max1111_chip,
+ },
+};
+
+static struct pxa2xx_spi_master spitz_spi_info = {
+ .num_chipselect = 3,
+};
+
+static void __init spitz_spi_init(void)
+{
+ struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
+
+ if (machine_is_akita()) {
+ lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+ lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+ }
+
+ pxa2xx_set_spi_info(2, &spitz_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
+}
+#else
+static inline void spitz_spi_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+/*
+ * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
+ * give the card a chance to fully insert/eject.
+ */
+static int spitz_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask)
+ spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
+ else
+ spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
+
+ return 0;
+}
+
+static struct pxamci_platform_data spitz_mci_platform_data = {
+ .detect_delay_ms = 250,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .setpower = spitz_mci_setpower,
+ .gpio_card_detect = SPITZ_GPIO_nSD_DETECT,
+ .gpio_card_ro = SPITZ_GPIO_nSD_WP,
+ .gpio_power = -1,
+};
+
+static void __init spitz_mmc_init(void)
+{
+ pxa_set_mci_info(&spitz_mci_platform_data);
+}
+#else
+static inline void spitz_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int spitz_ohci_init(struct device *dev)
+{
+ int err;
+
+ err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
+ if (err)
+ return err;
+
+ /* Only Port 2 is connected, setup USB Port 2 Output Control Register */
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+
+ return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
+}
+
+static void spitz_ohci_exit(struct device *dev)
+{
+ gpio_free(SPITZ_GPIO_USB_HOST);
+}
+
+static struct pxaohci_platform_data spitz_ohci_platform_data = {
+ .port_mode = PMM_NPS_MODE,
+ .init = spitz_ohci_init,
+ .exit = spitz_ohci_exit,
+ .flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
+ .power_budget = 150,
+};
+
+static void __init spitz_uhc_init(void)
+{
+ pxa_set_ohci_info(&spitz_ohci_platform_data);
+}
+#else
+static inline void spitz_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
+static struct pxaficp_platform_data spitz_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+static void __init spitz_irda_init(void)
+{
+ if (machine_is_akita())
+ spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
+ else
+ spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
+
+ pxa_set_ficp_info(&spitz_ficp_platform_data);
+}
+#else
+static inline void spitz_irda_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info spitz_pxafb_modes[] = {
+ {
+ .pixclock = 19231,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 40,
+ .left_margin = 46,
+ .right_margin = 125,
+ .vsync_len = 3,
+ .upper_margin = 1,
+ .lower_margin = 0,
+ .sync = 0,
+ }, {
+ .pixclock = 134617,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 20,
+ .left_margin = 20,
+ .right_margin = 46,
+ .vsync_len = 2,
+ .upper_margin = 1,
+ .lower_margin = 0,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info spitz_pxafb_info = {
+ .modes = spitz_pxafb_modes,
+ .num_modes = ARRAY_SIZE(spitz_pxafb_modes),
+ .fixed_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
+};
+
+static void __init spitz_lcd_init(void)
+{
+ pxa_set_fb_info(NULL, &spitz_pxafb_info);
+}
+#else
+static inline void spitz_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * NAND Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr spitz_nand_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static int akita_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 12)
+ return -ERANGE;
+
+ switch (section % 3) {
+ case 0:
+ oobregion->offset = 5;
+ oobregion->length = 1;
+ break;
+
+ case 1:
+ oobregion->offset = 1;
+ oobregion->length = 3;
+ break;
+
+ case 2:
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ break;
+ }
+
+ oobregion->offset += (section / 3) * 0x10;
+
+ return 0;
+}
+
+static int akita_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 8;
+ oobregion->length = 9;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops akita_ooblayout_ops = {
+ .ecc = akita_ooblayout_ecc,
+ .free = akita_ooblayout_free,
+};
+
+static const char * const probes[] = {
+ "cmdlinepart",
+ "ofpart",
+ "sharpslpart",
+ NULL,
+};
+
+static struct sharpsl_nand_platform_data spitz_nand_pdata = {
+ .badblock_pattern = &spitz_nand_bbt,
+ .part_parsers = probes,
+};
+
+static struct resource spitz_nand_resources[] = {
+ {
+ .start = PXA_CS3_PHYS,
+ .end = PXA_CS3_PHYS + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device spitz_nand_device = {
+ .name = "sharpsl-nand",
+ .id = -1,
+ .resource = spitz_nand_resources,
+ .num_resources = ARRAY_SIZE(spitz_nand_resources),
+ .dev = {
+ .platform_data = &spitz_nand_pdata,
+ }
+};
+
+static void __init spitz_nand_init(void)
+{
+ if (machine_is_akita() || machine_is_borzoi()) {
+ spitz_nand_bbt.len = 1;
+ spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops;
+ }
+
+ platform_device_register(&spitz_nand_device);
+}
+#else
+static inline void spitz_nand_init(void) {}
+#endif
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition spitz_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00140000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data spitz_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(spitz_rom_parts),
+ .parts = spitz_rom_parts,
+};
+
+static struct resource spitz_rom_resources[] = {
+ {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device spitz_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = spitz_rom_resources,
+ .num_resources = ARRAY_SIZE(spitz_rom_resources),
+ .dev = {
+ .platform_data = &spitz_rom_data,
+ },
+};
+
+static void __init spitz_nor_init(void)
+{
+ platform_device_register(&spitz_rom_device);
+}
+#else
+static inline void spitz_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C devices
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pca953x_platform_data akita_pca953x_pdata = {
+ .gpio_base = AKITA_IOEXP_GPIO_BASE,
+};
+
+static struct i2c_board_info spitz_i2c_devs[] = {
+ {
+ .type = "wm8750",
+ .addr = 0x1b,
+ }, {
+ .type = "max7310",
+ .addr = 0x18,
+ .platform_data = &akita_pca953x_pdata,
+ },
+};
+
+static struct regulator_consumer_supply isl6271a_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data isl6271a_info[] = {
+ {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 850000,
+ .max_uV = 1600000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = isl6271a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(isl6271a_consumers),
+ }
+};
+
+static struct i2c_board_info spitz_pi2c_devs[] = {
+ {
+ .type = "isl6271a",
+ .addr = 0x0c,
+ .platform_data = &isl6271a_info,
+ },
+};
+
+static void __init spitz_i2c_init(void)
+{
+ int size = ARRAY_SIZE(spitz_i2c_devs);
+
+ /* Only Akita has the max7310 chip */
+ if (!machine_is_akita())
+ size--;
+
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(0, spitz_i2c_devs, size);
+ i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs));
+}
+#else
+static inline void spitz_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio devices
+ ******************************************************************************/
+static inline void spitz_audio_init(void)
+{
+ platform_device_register_simple("spitz-audio", -1, NULL, 0);
+}
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void spitz_poweroff(void)
+{
+ pxa_restart(REBOOT_GPIO, NULL);
+}
+
+static void spitz_restart(enum reboot_mode mode, const char *cmd)
+{
+ uint32_t msc0 = __raw_readl(MSC0);
+ /* Bootloader magic for a reboot */
+ if ((msc0 & 0xffff0000) == 0x7ff00000)
+ __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
+
+ spitz_poweroff();
+}
+
+static void __init spitz_init(void)
+{
+ init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
+ pm_power_off = spitz_poweroff;
+
+ PMCR = 0x00;
+
+ /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+ PCFR |= PCFR_OPDE;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ spitz_spi_init();
+ spitz_scoop_init();
+ spitz_mkp_init();
+ spitz_keys_init();
+ spitz_leds_init();
+ spitz_mmc_init();
+ spitz_pcmcia_init();
+ spitz_irda_init();
+ spitz_uhc_init();
+ spitz_lcd_init();
+ spitz_nor_init();
+ spitz_nand_init();
+ spitz_i2c_init();
+ spitz_audio_init();
+
+ regulator_has_full_constraints();
+}
+
+static void __init spitz_fixup(struct tag *tags, char **cmdline)
+{
+ sharpsl_save_param();
+ memblock_add(0xa0000000, SZ_64M);
+}
+
+#ifdef CONFIG_MACH_SPITZ
+MACHINE_START(SPITZ, "SHARP Spitz")
+ .fixup = spitz_fixup,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_machine = spitz_init,
+ .init_time = pxa_timer_init,
+ .restart = spitz_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_BORZOI
+MACHINE_START(BORZOI, "SHARP Borzoi")
+ .fixup = spitz_fixup,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_machine = spitz_init,
+ .init_time = pxa_timer_init,
+ .restart = spitz_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_AKITA
+MACHINE_START(AKITA, "SHARP Akita")
+ .fixup = spitz_fixup,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_machine = spitz_init,
+ .init_time = pxa_timer_init,
+ .restart = spitz_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
new file mode 100644
index 0000000..4e64a14
--- /dev/null
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -0,0 +1,259 @@
+/*
+ * Battery and Power Management code for the Sharp SL-Cxx00
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/stat.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/apm-emulation.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+#include <mach/spitz.h>
+#include "pxa27x.h"
+#include "sharpsl_pm.h"
+
+#include "generic.h"
+
+#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
+#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
+#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */
+#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */
+#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */
+#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */
+
+static int spitz_last_ac_status;
+
+static struct gpio spitz_charger_gpios[] = {
+ { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" },
+ { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" },
+ { SPITZ_GPIO_AC_IN, GPIOF_IN, "Charger Detection" },
+ { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
+ { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" },
+ { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" },
+};
+
+static void spitz_charger_init(void)
+{
+ gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios));
+}
+
+static void spitz_measure_temp(int on)
+{
+ gpio_set_value(SPITZ_GPIO_ADC_TEMP_ON, on);
+}
+
+static void spitz_charge(int on)
+{
+ if (on) {
+ if (sharpsl_pm.flags & SHARPSL_SUSPENDED) {
+ gpio_set_value(SPITZ_GPIO_JK_B, 1);
+ gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
+ } else {
+ gpio_set_value(SPITZ_GPIO_JK_B, 0);
+ gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
+ }
+ } else {
+ gpio_set_value(SPITZ_GPIO_JK_B, 0);
+ gpio_set_value(SPITZ_GPIO_CHRG_ON, 1);
+ }
+}
+
+static void spitz_discharge(int on)
+{
+ gpio_set_value(SPITZ_GPIO_JK_A, on);
+}
+
+/* HACK - For unknown reasons, accurate voltage readings are only made with a load
+ on the power bus which the green led on spitz provides */
+static void spitz_discharge1(int on)
+{
+ gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
+}
+
+static unsigned long gpio18_config = GPIO18_GPIO;
+
+static void spitz_presuspend(void)
+{
+ spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+ /* GPIO Sleep Register */
+ PGSR0 = 0x00144018;
+ PGSR1 = 0x00EF0000;
+ if (machine_is_akita()) {
+ PGSR2 = 0x2121C000;
+ PGSR3 = 0x00600400;
+ } else {
+ PGSR2 = 0x0121C000;
+ PGSR3 = 0x00600000;
+ }
+
+ PGSR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
+ PGSR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
+ PGSR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
+ PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
+ PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
+
+ pxa2xx_mfp_config(&gpio18_config, 1);
+ gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
+ gpio_free(18);
+
+ PRER = GPIO_bit(SPITZ_GPIO_KEY_INT);
+ PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
+ PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
+ PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
+ PKSR = 0xffffffff; /* clear */
+
+ /* nRESET_OUT Disable */
+ PSLR |= PSLR_SL_ROD;
+
+ /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+ PCFR = PCFR_GPR_EN | PCFR_OPDE;
+}
+
+static void spitz_postsuspend(void)
+{
+}
+
+static int spitz_should_wakeup(unsigned int resume_on_alarm)
+{
+ int is_resume = 0;
+ int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+ if (spitz_last_ac_status != acin) {
+ if (acin) {
+ /* charge on */
+ sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+ dev_dbg(sharpsl_pm.dev, "AC Inserted\n");
+ } else {
+ /* charge off */
+ dev_dbg(sharpsl_pm.dev, "AC Removed\n");
+ sharpsl_pm_led(SHARPSL_LED_OFF);
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm.charge_mode = CHRG_OFF;
+ }
+ spitz_last_ac_status = acin;
+ /* Return to suspend as this must be what we were woken for */
+ return 0;
+ }
+
+ if (PEDR & GPIO_bit(SPITZ_GPIO_KEY_INT))
+ is_resume |= GPIO_bit(SPITZ_GPIO_KEY_INT);
+
+ if (PKSR & GPIO_bit(SPITZ_GPIO_SYNC))
+ is_resume |= GPIO_bit(SPITZ_GPIO_SYNC);
+
+ if (resume_on_alarm && (PEDR & PWER_RTC))
+ is_resume |= PWER_RTC;
+
+ dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume);
+ return is_resume;
+}
+
+static bool spitz_charger_wakeup(void)
+{
+ return !gpio_get_value(SPITZ_GPIO_KEY_INT) ||
+ gpio_get_value(SPITZ_GPIO_SYNC);
+}
+
+unsigned long spitzpm_read_devdata(int type)
+{
+ switch (type) {
+ case SHARPSL_STATUS_ACIN:
+ return !gpio_get_value(SPITZ_GPIO_AC_IN);
+ case SHARPSL_STATUS_LOCK:
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
+ case SHARPSL_STATUS_CHRGFULL:
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
+ case SHARPSL_STATUS_FATAL:
+ return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
+ case SHARPSL_ACIN_VOLT:
+ return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
+ case SHARPSL_BATT_TEMP:
+ return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
+ case SHARPSL_BATT_VOLT:
+ default:
+ return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
+ }
+}
+
+struct sharpsl_charger_machinfo spitz_pm_machinfo = {
+ .init = spitz_charger_init,
+ .exit = NULL,
+ .gpio_batlock = SPITZ_GPIO_BAT_COVER,
+ .gpio_acin = SPITZ_GPIO_AC_IN,
+ .gpio_batfull = SPITZ_GPIO_CHRG_FULL,
+ .batfull_irq = 1,
+ .gpio_fatal = SPITZ_GPIO_FATAL_BAT,
+ .discharge = spitz_discharge,
+ .discharge1 = spitz_discharge1,
+ .charge = spitz_charge,
+ .measure_temp = spitz_measure_temp,
+ .presuspend = spitz_presuspend,
+ .postsuspend = spitz_postsuspend,
+ .read_devdata = spitzpm_read_devdata,
+ .charger_wakeup = spitz_charger_wakeup,
+ .should_wakeup = spitz_should_wakeup,
+#if defined(CONFIG_LCD_CORGI)
+ .backlight_limit = corgi_lcd_limit_intensity,
+#endif
+ .charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
+ .charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
+ .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
+ .charge_acin_low = SHARPSL_CHARGE_ON_ACIN_LOW,
+ .fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT,
+ .fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
+ .bat_levels = 40,
+ .bat_levels_noac = sharpsl_battery_levels_noac,
+ .bat_levels_acin = sharpsl_battery_levels_acin,
+ .status_high_acin = 188,
+ .status_low_acin = 178,
+ .status_high_noac = 185,
+ .status_low_noac = 175,
+};
+
+static struct platform_device *spitzpm_device;
+
+static int spitzpm_init(void)
+{
+ int ret;
+
+ if (!machine_is_spitz() && !machine_is_akita()
+ && !machine_is_borzoi())
+ return -ENODEV;
+
+ spitzpm_device = platform_device_alloc("sharpsl-pm", -1);
+ if (!spitzpm_device)
+ return -ENOMEM;
+
+ spitzpm_device->dev.platform_data = &spitz_pm_machinfo;
+ ret = platform_device_add(spitzpm_device);
+
+ if (ret)
+ platform_device_put(spitzpm_device);
+
+ return ret;
+}
+
+static void spitzpm_exit(void)
+{
+ platform_device_unregister(spitzpm_device);
+}
+
+module_init(spitzpm_init);
+module_exit(spitzpm_exit);
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
new file mode 100644
index 0000000..eab1645
--- /dev/null
+++ b/arch/arm/mach-pxa/standby.S
@@ -0,0 +1,114 @@
+/*
+ * PXA27x standby mode
+ *
+ * Author: David Burrage
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+
+#include <mach/pxa2xx-regs.h>
+
+ .text
+
+#ifdef CONFIG_PXA27x
+ENTRY(pxa_cpu_standby)
+ ldr r0, =PSSR
+ mov r1, #(PSSR_PH | PSSR_STS)
+ mov r2, #PWRMODE_STANDBY
+ mov r3, #UNCACHED_PHYS_0 @ Read mem context in.
+ ldr ip, [r3]
+ b 1f
+
+ .align 5
+1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby
+ str r1, [r0] @ make sure PSSR_PH/STS are clear
+ ret lr
+
+#endif
+
+#ifdef CONFIG_PXA3xx
+
+#define PXA3_MDCNFG 0x0000
+#define PXA3_MDCNFG_DMCEN (1 << 30)
+#define PXA3_DDR_HCAL 0x0060
+#define PXA3_DDR_HCAL_HCRNG 0x1f
+#define PXA3_DDR_HCAL_HCPROG (1 << 28)
+#define PXA3_DDR_HCAL_HCEN (1 << 31)
+#define PXA3_DMCIER 0x0070
+#define PXA3_DMCIER_EDLP (1 << 29)
+#define PXA3_DMCISR 0x0078
+#define PXA3_RCOMP 0x0100
+#define PXA3_RCOMP_SWEVAL (1 << 31)
+
+ENTRY(pm_enter_standby_start)
+ mov r1, #0xf6000000 @ DMEMC_REG_BASE (PXA3_MDCNFG)
+ add r1, r1, #0x00100000
+
+ /*
+ * Preload the TLB entry for accessing the dynamic memory
+ * controller registers. Note that page table lookups will
+ * fail until the dynamic memory controller has been
+ * reinitialised - and that includes MMU page table walks.
+ * This also means that only the dynamic memory controller
+ * can be reliably accessed in the code following standby.
+ */
+ ldr r2, [r1] @ Dummy read PXA3_MDCNFG
+
+ mcr p14, 0, r0, c7, c0, 0
+ .rept 8
+ nop
+ .endr
+
+ ldr r0, [r1, #PXA3_DDR_HCAL] @ Clear (and wait for) HCEN
+ bic r0, r0, #PXA3_DDR_HCAL_HCEN
+ str r0, [r1, #PXA3_DDR_HCAL]
+1: ldr r0, [r1, #PXA3_DDR_HCAL]
+ tst r0, #PXA3_DDR_HCAL_HCEN
+ bne 1b
+
+ ldr r0, [r1, #PXA3_RCOMP] @ Initiate RCOMP
+ orr r0, r0, #PXA3_RCOMP_SWEVAL
+ str r0, [r1, #PXA3_RCOMP]
+
+ mov r0, #~0 @ Clear interrupts
+ str r0, [r1, #PXA3_DMCISR]
+
+ ldr r0, [r1, #PXA3_DMCIER] @ set DMIER[EDLP]
+ orr r0, r0, #PXA3_DMCIER_EDLP
+ str r0, [r1, #PXA3_DMCIER]
+
+ ldr r0, [r1, #PXA3_DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN
+ bic r0, r0, #PXA3_DDR_HCAL_HCRNG
+ orr r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
+ str r0, [r1, #PXA3_DDR_HCAL]
+
+1: ldr r0, [r1, #PXA3_DMCISR]
+ tst r0, #PXA3_DMCIER_EDLP
+ beq 1b
+
+ ldr r0, [r1, #PXA3_MDCNFG] @ set PXA3_MDCNFG[DMCEN]
+ orr r0, r0, #PXA3_MDCNFG_DMCEN
+ str r0, [r1, #PXA3_MDCNFG]
+1: ldr r0, [r1, #PXA3_MDCNFG]
+ tst r0, #PXA3_MDCNFG_DMCEN
+ beq 1b
+
+ ldr r0, [r1, #PXA3_DDR_HCAL] @ set PXA3_DDR_HCAL[HCRNG]
+ orr r0, r0, #2 @ HCRNG
+ str r0, [r1, #PXA3_DDR_HCAL]
+
+ ldr r0, [r1, #PXA3_DMCIER] @ Clear the interrupt
+ bic r0, r0, #0x20000000
+ str r0, [r1, #PXA3_DMCIER]
+
+ ret lr
+ENTRY(pm_enter_standby_end)
+
+#endif
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
new file mode 100644
index 0000000..bbea5fa
--- /dev/null
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -0,0 +1,1032 @@
+/*
+ * linux/arch/arm/mach-pxa/stargate2.c
+ *
+ * Author: Ed C. Epp
+ * Created: Nov 05, 2002
+ * Copyright: Intel Corp.
+ *
+ * Modified 2009: Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/pcf857x.h>
+#include <linux/smc91x.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/property.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include "pxa27x.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
+#include <mach/smemc.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/mfd/da903x.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define STARGATE_NR_IRQS (IRQ_BOARD_START + 8)
+
+/* Bluetooth */
+#define SG2_BT_RESET 81
+
+/* SD */
+#define SG2_GPIO_nSD_DETECT 90
+#define SG2_SD_POWER_ENABLE 89
+
+static unsigned long sg2_im2_unified_pin_config[] __initdata = {
+ /* Device Identification for wakeup*/
+ GPIO102_GPIO,
+ /* DA9030 */
+ GPIO1_GPIO,
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ /* 802.15.4 radio - driver out of mainline */
+ GPIO22_GPIO, /* CC_RSTN */
+ GPIO114_GPIO, /* CC_FIFO */
+ GPIO116_GPIO, /* CC_CCA */
+ GPIO0_GPIO, /* CC_FIFOP */
+ GPIO16_GPIO, /* CCSFD */
+ GPIO115_GPIO, /* Power enable */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* SSP 3 - 802.15.4 radio */
+ GPIO39_GPIO, /* Chip Select */
+ GPIO34_SSP3_SCLK,
+ GPIO35_SSP3_TXD,
+ GPIO41_SSP3_RXD,
+
+ /* SSP 2 to daughter boards */
+ GPIO11_SSP2_RXD,
+ GPIO38_SSP2_TXD,
+ GPIO36_SSP2_SCLK,
+ GPIO37_GPIO, /* chip select */
+
+ /* SSP 1 - to daughter boards */
+ GPIO24_GPIO, /* Chip Select */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* BTUART Basic Connector*/
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART - IM2 via debug board not sure on SG2*/
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* Basic sensor board */
+ GPIO96_GPIO, /* accelerometer interrupt */
+ GPIO99_GPIO, /* ADC interrupt */
+
+ /* SHT15 */
+ GPIO100_GPIO,
+ GPIO98_GPIO,
+
+ /* Basic sensor board */
+ GPIO96_GPIO, /* accelerometer interrupt */
+ GPIO99_GPIO, /* ADC interrupt */
+
+ /* Connector pins specified as gpios */
+ GPIO94_GPIO, /* large basic connector pin 14 */
+ GPIO10_GPIO, /* large basic connector pin 23 */
+};
+
+static struct gpiod_lookup_table sht15_gpiod_table = {
+ .dev_id = "sht15",
+ .table = {
+ /* FIXME: should this have |GPIO_OPEN_DRAIN set? */
+ GPIO_LOOKUP("gpio-pxa", 100, "data", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", 98, "clk", GPIO_ACTIVE_HIGH),
+ },
+};
+
+static struct platform_device sht15 = {
+ .name = "sht15",
+ .id = -1,
+};
+
+static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
+ REGULATOR_SUPPLY("vcc", "sht15"),
+};
+
+enum stargate2_ldos{
+ vcc_vref,
+ vcc_cc2420,
+ /* a mote connector? */
+ vcc_mica,
+ /* the CSR bluecore chip */
+ vcc_bt,
+ /* The two voltages available to sensor boards */
+ vcc_sensor_1_8,
+ vcc_sensor_3,
+ /* directly connected to the pxa27x */
+ vcc_sram_ext,
+ vcc_pxa_pll,
+ vcc_pxa_usim, /* Reference voltage for certain gpios */
+ vcc_pxa_mem,
+ vcc_pxa_flash,
+ vcc_pxa_core, /*Dc-Dc buck not yet supported */
+ vcc_lcd,
+ vcc_bb,
+ vcc_bbio, /*not sure!*/
+ vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
+};
+
+/* The values of the various regulator constraints are obviously dependent
+ * on exactly what is wired to each ldo. Unfortunately this information is
+ * not generally available. More information has been requested from Xbow.
+ */
+static struct regulator_init_data stargate2_ldo_init_data[] = {
+ [vcc_bbio] = {
+ .constraints = { /* board default 1.8V */
+ .name = "vcc_bbio",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_bb] = {
+ .constraints = { /* board default 2.8V */
+ .name = "vcc_bb",
+ .min_uV = 2700000,
+ .max_uV = 3000000,
+ },
+ },
+ [vcc_pxa_flash] = {
+ .constraints = {/* default is 1.8V */
+ .name = "vcc_pxa_flash",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_cc2420] = { /* also vcc_io */
+ .constraints = {
+ /* board default is 2.8V */
+ .name = "vcc_cc2420",
+ .min_uV = 2700000,
+ .max_uV = 3300000,
+ },
+ },
+ [vcc_vref] = { /* Reference for what? */
+ .constraints = { /* default 1.8V */
+ .name = "vcc_vref",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_sram_ext] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_sram_ext",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+ },
+ [vcc_mica] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_mica",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+ },
+ [vcc_bt] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_bt",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+ },
+ [vcc_lcd] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_lcd",
+ .min_uV = 2700000,
+ .max_uV = 3300000,
+ },
+ },
+ [vcc_io] = { /* Same or higher than everything
+ * bar vccbat and vccusb */
+ .constraints = { /* default 2.8V */
+ .name = "vcc_io",
+ .min_uV = 2692000,
+ .max_uV = 3300000,
+ },
+ },
+ [vcc_sensor_1_8] = {
+ .constraints = { /* default 1.8V */
+ .name = "vcc_sensor_1_8",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_sensor_3] = { /* curiously default 2.8V */
+ .constraints = {
+ .name = "vcc_sensor_3",
+ .min_uV = 2800000,
+ .max_uV = 3000000,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
+ .consumer_supplies = stargate2_sensor_3_con,
+ },
+ [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
+ .constraints = {
+ .name = "vcc_pxa_pll",
+ .min_uV = 1170000,
+ .max_uV = 1430000,
+ },
+ },
+ [vcc_pxa_usim] = {
+ .constraints = { /* default 1.8V */
+ .name = "vcc_pxa_usim",
+ .min_uV = 1710000,
+ .max_uV = 2160000,
+ },
+ },
+ [vcc_pxa_mem] = {
+ .constraints = { /* default 1.8V */
+ .name = "vcc_pxa_mem",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+};
+
+static struct mtd_partition stargate2flash_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = 0,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0x00040000,
+ .mask_flags = 0
+ }, {
+ .name = "Filesystem",
+ .size = 0x01DC0000,
+ .offset = 0x00240000,
+ .mask_flags = 0
+ },
+};
+
+static struct resource flash_resources = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+ .map_name = "cfi_probe",
+ .parts = stargate2flash_partitions,
+ .nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+ .name = "PXA27xOnChipROM",
+ .width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &stargate2_flash_data,
+ },
+ .resource = &flash_resources,
+ .num_resources = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+ .num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+ .tx_threshold = 8,
+ .rx_threshold = 8,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+ .tx_threshold = 8,
+ .rx_threshold = 8,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "lis3l02dq",
+ .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+ .bus_num = 1,
+ .chip_select = 0,
+ .controller_data = &staccel_chip_info,
+ .irq = PXA_GPIO_TO_IRQ(96),
+ }, {
+ .modalias = "cc2420",
+ .max_speed_hz = 6500000,
+ .bus_num = 3,
+ .chip_select = 0,
+ .controller_data = &cc2420_info,
+ },
+};
+
+static void sg2_udc_command(int cmd)
+{
+ switch (cmd) {
+ case PXA2XX_UDC_CMD_CONNECT:
+ UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ break;
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+ break;
+ }
+}
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+ .fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+ .fast_mode = 1,
+};
+
+static void __init imote2_stargate2_init(void)
+{
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+ pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+ pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+
+ pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+ pxa_set_i2c_info(&i2c_pdata);
+}
+
+#ifdef CONFIG_MACH_INTELMOTE2
+/* As the the imote2 doesn't currently have a conventional SD slot
+ * there is no option to hotplug cards, making all this rather simple
+ */
+static int imote2_mci_get_ro(struct device *dev)
+{
+ return 0;
+}
+
+/* Rather simple case as hotplugging not possible */
+static struct pxamci_platform_data imote2_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
+ .get_ro = imote2_mci_get_ro,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+static struct gpio_led imote2_led_pins[] = {
+ {
+ .name = "imote2:red",
+ .gpio = 103,
+ .active_low = 1,
+ }, {
+ .name = "imote2:green",
+ .gpio = 104,
+ .active_low = 1,
+ }, {
+ .name = "imote2:blue",
+ .gpio = 105,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data imote2_led_data = {
+ .num_leds = ARRAY_SIZE(imote2_led_pins),
+ .leds = imote2_led_pins,
+};
+
+static struct platform_device imote2_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &imote2_led_data,
+ },
+};
+
+static struct da903x_subdev_info imote2_da9030_subdevs[] = {
+ {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO2,
+ .platform_data = &stargate2_ldo_init_data[vcc_bbio],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO3,
+ .platform_data = &stargate2_ldo_init_data[vcc_bb],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO4,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO5,
+ .platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO6,
+ .platform_data = &stargate2_ldo_init_data[vcc_vref],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO7,
+ .platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO8,
+ .platform_data = &stargate2_ldo_init_data[vcc_mica],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO9,
+ .platform_data = &stargate2_ldo_init_data[vcc_bt],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO10,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO11,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO12,
+ .platform_data = &stargate2_ldo_init_data[vcc_lcd],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO15,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO17,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+ }, {
+ .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+ .id = DA9030_ID_LDO18,
+ .platform_data = &stargate2_ldo_init_data[vcc_io],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO19,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+ },
+};
+
+static struct da903x_platform_data imote2_da9030_pdata = {
+ .num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
+ .subdevs = imote2_da9030_subdevs,
+};
+
+static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
+ {
+ .type = "da9030",
+ .addr = 0x49,
+ .platform_data = &imote2_da9030_pdata,
+ .irq = PXA_GPIO_TO_IRQ(1),
+ },
+};
+
+static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
+ { /* UCAM sensor board */
+ .type = "max1239",
+ .addr = 0x35,
+ }, { /* ITS400 Sensor board only */
+ .type = "max1363",
+ .addr = 0x34,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = PXA_GPIO_TO_IRQ(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tsl2561",
+ .addr = 0x49,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = PXA_GPIO_TO_IRQ(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tmp175",
+ .addr = 0x4A,
+ .irq = PXA_GPIO_TO_IRQ(96),
+ }, { /* IMB400 Multimedia board */
+ .type = "wm8940",
+ .addr = 0x1A,
+ },
+};
+
+static unsigned long imote2_pin_config[] __initdata = {
+
+ /* Button */
+ GPIO91_GPIO,
+
+ /* LEDS */
+ GPIO103_GPIO, /* red led */
+ GPIO104_GPIO, /* green led */
+ GPIO105_GPIO, /* blue led */
+};
+
+static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
+ .udc_command = sg2_udc_command,
+};
+
+static struct platform_device imote2_audio_device = {
+ .name = "imote2-audio",
+ .id = -1,
+};
+
+static struct platform_device *imote2_devices[] = {
+ &stargate2_flash_device,
+ &imote2_leds,
+ &sht15,
+ &imote2_audio_device,
+};
+
+static void __init imote2_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+ imote2_stargate2_init();
+
+ gpiod_add_lookup_table(&sht15_gpiod_table);
+ platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
+
+ i2c_register_board_info(0, imote2_i2c_board_info,
+ ARRAY_SIZE(imote2_i2c_board_info));
+ i2c_register_board_info(1, imote2_pwr_i2c_board_info,
+ ARRAY_SIZE(imote2_pwr_i2c_board_info));
+
+ pxa_set_mci_info(&imote2_mci_platform_data);
+ pxa_set_udc_info(&imote2_udc_info);
+}
+#endif
+
+#ifdef CONFIG_MACH_STARGATE2
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+ GPIO15_nCS_1, /* SRAM */
+ /* SMC91x */
+ GPIO80_nCS_4,
+ GPIO40_GPIO, /*cable detect?*/
+
+ /* Button */
+ GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+ /* Compact Flash */
+ GPIO79_PSKTSEL,
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO120_GPIO, /* Buff ctrl */
+ GPIO108_GPIO, /* Power ctrl */
+ GPIO82_GPIO, /* Reset */
+ GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+ /* MMC not shared with imote2 */
+ GPIO90_GPIO, /* nSD detect */
+ GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+ /* Bluetooth */
+ GPIO81_GPIO, /* reset */
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = (PXA_CS4_PHYS + 0x300),
+ .end = (PXA_CS4_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(40),
+ .end = PXA_GPIO_TO_IRQ(40),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata stargate2_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
+ | SMC91X_NOWAIT | SMC91X_USE_DMA,
+ .pxa_u16_align4 = true,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &stargate2_smc91x_info,
+ },
+};
+
+
+/*
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert / eject.
+ */
+static int stargate2_mci_init(struct device *dev,
+ irq_handler_t stargate2_detect_int,
+ void *data)
+{
+ int err;
+
+ err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
+ if (err) {
+ printk(KERN_ERR "Can't get the gpio for SD power control");
+ goto return_err;
+ }
+ gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
+
+ err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
+ if (err) {
+ printk(KERN_ERR "Can't get the sd detect gpio");
+ goto free_power_en;
+ }
+ gpio_direction_input(SG2_GPIO_nSD_DETECT);
+
+ err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
+ stargate2_detect_int,
+ IRQ_TYPE_EDGE_BOTH,
+ "MMC card detect",
+ data);
+ if (err) {
+ printk(KERN_ERR "can't request MMC card detect IRQ\n");
+ goto free_nsd_detect;
+ }
+ return 0;
+
+ free_nsd_detect:
+ gpio_free(SG2_GPIO_nSD_DETECT);
+ free_power_en:
+ gpio_free(SG2_SD_POWER_ENABLE);
+ return_err:
+ return err;
+}
+
+/**
+ * stargate2_mci_setpower() - set state of mmc power supply
+ *
+ * Very simple control. Either it is on or off and is controlled by
+ * a gpio pin */
+static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+ return 0;
+}
+
+static void stargate2_mci_exit(struct device *dev, void *data)
+{
+ free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
+ gpio_free(SG2_SD_POWER_ENABLE);
+ gpio_free(SG2_GPIO_nSD_DETECT);
+}
+
+static struct pxamci_platform_data stargate2_mci_platform_data = {
+ .detect_delay_ms = 250,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = stargate2_mci_init,
+ .setpower = stargate2_mci_setpower,
+ .exit = stargate2_mci_exit,
+};
+
+
+/*
+ * SRAM - The Stargate 2 has 32MB of SRAM.
+ *
+ * Here it is made available as an MTD. This will then
+ * typically have a cifs filesystem created on it to provide
+ * fast temporary storage.
+ */
+static struct resource sram_resources = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + SZ_32M-1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platdata_mtd_ram stargate2_sram_pdata = {
+ .mapname = "Stargate2 SRAM",
+ .bankwidth = 2,
+};
+
+static struct platform_device stargate2_sram = {
+ .name = "mtd-ram",
+ .id = 0,
+ .resource = &sram_resources,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &stargate2_sram_pdata,
+ },
+};
+
+static struct pcf857x_platform_data platform_data_pcf857x = {
+ .gpio_base = 128,
+ .n_latch = 0,
+ .setup = NULL,
+ .teardown = NULL,
+ .context = NULL,
+};
+
+static const struct property_entry pca9500_eeprom_properties[] = {
+ PROPERTY_ENTRY_U32("pagesize", 4),
+ { }
+};
+
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+ int err;
+ err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+ if (err) {
+ printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
+ return err;
+ }
+ gpio_direction_output(SG2_BT_RESET, 1);
+ mdelay(5);
+ /* now reset it - 5 msec minimum */
+ gpio_set_value(SG2_BT_RESET, 0);
+ mdelay(10);
+ gpio_set_value(SG2_BT_RESET, 1);
+ gpio_free(SG2_BT_RESET);
+ return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+ {
+ .name = "sg2:red",
+ .flags = DA9030_LED_RATE_ON,
+ }, {
+ .name = "sg2:blue",
+ .flags = DA9030_LED_RATE_ON,
+ }, {
+ .name = "sg2:green",
+ .flags = DA9030_LED_RATE_ON,
+ },
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+ {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_2,
+ .platform_data = &stargate2_leds[0],
+ }, {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_3,
+ .platform_data = &stargate2_leds[2],
+ }, {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_4,
+ .platform_data = &stargate2_leds[1],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO2,
+ .platform_data = &stargate2_ldo_init_data[vcc_bbio],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO3,
+ .platform_data = &stargate2_ldo_init_data[vcc_bb],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO4,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO5,
+ .platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO6,
+ .platform_data = &stargate2_ldo_init_data[vcc_vref],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO7,
+ .platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO8,
+ .platform_data = &stargate2_ldo_init_data[vcc_mica],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO9,
+ .platform_data = &stargate2_ldo_init_data[vcc_bt],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO10,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO11,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO12,
+ .platform_data = &stargate2_ldo_init_data[vcc_lcd],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO15,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO17,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+ }, {
+ .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+ .id = DA9030_ID_LDO18,
+ .platform_data = &stargate2_ldo_init_data[vcc_io],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO19,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+ },
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+ .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+ .subdevs = stargate2_da9030_subdevs,
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+ {
+ .type = "da9030",
+ .addr = 0x49,
+ .platform_data = &stargate2_da9030_pdata,
+ .irq = PXA_GPIO_TO_IRQ(1),
+ },
+};
+
+static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
+ /* Techically this a pca9500 - but it's compatible with the 8574
+ * for gpio expansion and the 24c02 for eeprom access.
+ */
+ {
+ .type = "pcf8574",
+ .addr = 0x27,
+ .platform_data = &platform_data_pcf857x,
+ }, {
+ .type = "24c02",
+ .addr = 0x57,
+ .properties = pca9500_eeprom_properties,
+ }, {
+ .type = "max1238",
+ .addr = 0x35,
+ }, { /* ITS400 Sensor board only */
+ .type = "max1363",
+ .addr = 0x34,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = PXA_GPIO_TO_IRQ(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tsl2561",
+ .addr = 0x49,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = PXA_GPIO_TO_IRQ(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tmp175",
+ .addr = 0x4A,
+ .irq = PXA_GPIO_TO_IRQ(96),
+ },
+};
+
+/* Board doesn't support cable detection - so always lie and say
+ * something is there.
+ */
+static int sg2_udc_detect(void)
+{
+ return 1;
+}
+
+static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
+ .udc_is_connected = sg2_udc_detect,
+ .udc_command = sg2_udc_command,
+};
+
+static struct platform_device *stargate2_devices[] = {
+ &stargate2_flash_device,
+ &stargate2_sram,
+ &smc91x_device,
+ &sht15,
+};
+
+static void __init stargate2_init(void)
+{
+ /* This is probably a board specific hack as this must be set
+ prior to connecting the MFP stuff up. */
+ __raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
+
+ imote2_stargate2_init();
+
+ gpiod_add_lookup_table(&sht15_gpiod_table);
+ platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
+
+ i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
+ i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
+ ARRAY_SIZE(stargate2_pwr_i2c_board_info));
+
+ pxa_set_mci_info(&stargate2_mci_platform_data);
+
+ pxa_set_udc_info(&stargate2_udc_info);
+
+ stargate2_reset_bluetooth();
+}
+#endif
+
+#ifdef CONFIG_MACH_INTELMOTE2
+MACHINE_START(INTELMOTE2, "IMOTE 2")
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = imote2_init,
+ .atag_offset = 0x100,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_STARGATE2
+MACHINE_START(STARGATE2, "Stargate 2")
+ .map_io = pxa27x_map_io,
+ .nr_irqs = STARGATE_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = stargate2_init,
+ .atag_offset = 0x100,
+ .restart = pxa_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
new file mode 100644
index 0000000..4b38e82
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -0,0 +1,511 @@
+/*
+ * linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ * Support for the Marvell PXA930 Evaluation Board
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa930.h"
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+ /* Ethernet */
+ DF_nCS1_nCS3,
+ GPIO47_GPIO,
+
+ /* LCD */
+ GPIO23_LCD_DD0,
+ GPIO24_LCD_DD1,
+ GPIO25_LCD_DD2,
+ GPIO26_LCD_DD3,
+ GPIO27_LCD_DD4,
+ GPIO28_LCD_DD5,
+ GPIO29_LCD_DD6,
+ GPIO44_LCD_DD7,
+ GPIO21_LCD_CS,
+ GPIO22_LCD_CS2,
+
+ GPIO17_LCD_FCLK_RD,
+ GPIO18_LCD_LCLK_A0,
+ GPIO19_LCD_PCLK_WR,
+
+ /* LCD Backlight */
+ GPIO43_PWM3, /* primary backlight */
+ GPIO32_PWM0, /* secondary backlight */
+
+ /* Keypad */
+ GPIO0_KP_MKIN_0,
+ GPIO2_KP_MKIN_1,
+ GPIO4_KP_MKIN_2,
+ GPIO6_KP_MKIN_3,
+ GPIO8_KP_MKIN_4,
+ GPIO10_KP_MKIN_5,
+ GPIO12_KP_MKIN_6,
+ GPIO1_KP_MKOUT_0,
+ GPIO3_KP_MKOUT_1,
+ GPIO5_KP_MKOUT_2,
+ GPIO7_KP_MKOUT_3,
+ GPIO9_KP_MKOUT_4,
+ GPIO11_KP_MKOUT_5,
+ GPIO13_KP_MKOUT_6,
+
+ GPIO14_KP_DKIN_2,
+ GPIO15_KP_DKIN_3,
+};
+
+#define TAVOREVB_ETH_PHYS (0x14000000)
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = (TAVOREVB_ETH_PHYS + 0x300),
+ .end = (TAVOREVB_ETH_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &tavorevb_smc91x_info,
+ },
+};
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int tavorevb_matrix_key_map[] = {
+ /* KEY(row, col, key_code) */
+ KEY(0, 4, KEY_A), KEY(0, 5, KEY_B), KEY(0, 6, KEY_C),
+ KEY(1, 4, KEY_E), KEY(1, 5, KEY_F), KEY(1, 6, KEY_G),
+ KEY(2, 4, KEY_I), KEY(2, 5, KEY_J), KEY(2, 6, KEY_K),
+ KEY(3, 4, KEY_M), KEY(3, 5, KEY_N), KEY(3, 6, KEY_O),
+ KEY(4, 5, KEY_R), KEY(4, 6, KEY_S),
+ KEY(5, 4, KEY_U), KEY(5, 4, KEY_V), KEY(5, 6, KEY_W),
+
+ KEY(6, 4, KEY_Y), KEY(6, 5, KEY_Z),
+
+ KEY(0, 3, KEY_0), KEY(2, 0, KEY_1), KEY(2, 1, KEY_2), KEY(2, 2, KEY_3),
+ KEY(2, 3, KEY_4), KEY(1, 0, KEY_5), KEY(1, 1, KEY_6), KEY(1, 2, KEY_7),
+ KEY(1, 3, KEY_8), KEY(0, 2, KEY_9),
+
+ KEY(6, 6, KEY_SPACE),
+ KEY(0, 0, KEY_KPASTERISK), /* * */
+ KEY(0, 1, KEY_KPDOT), /* # */
+
+ KEY(4, 1, KEY_UP),
+ KEY(4, 3, KEY_DOWN),
+ KEY(4, 0, KEY_LEFT),
+ KEY(4, 2, KEY_RIGHT),
+ KEY(6, 0, KEY_HOME),
+ KEY(3, 2, KEY_END),
+ KEY(6, 1, KEY_DELETE),
+ KEY(5, 2, KEY_BACK),
+ KEY(6, 3, KEY_CAPSLOCK), /* KEY_LEFTSHIFT), */
+
+ KEY(4, 4, KEY_ENTER), /* scroll push */
+ KEY(6, 2, KEY_ENTER), /* keypad action */
+
+ KEY(3, 1, KEY_SEND),
+ KEY(5, 3, KEY_RECORD),
+ KEY(5, 0, KEY_VOLUMEUP),
+ KEY(5, 1, KEY_VOLUMEDOWN),
+
+ KEY(3, 0, KEY_F22), /* soft1 */
+ KEY(3, 3, KEY_F23), /* soft2 */
+};
+
+static struct matrix_keymap_data tavorevb_matrix_keymap_data = {
+ .keymap = tavorevb_matrix_key_map,
+ .keymap_size = ARRAY_SIZE(tavorevb_matrix_key_map),
+};
+
+static struct pxa27x_keypad_platform_data tavorevb_keypad_info = {
+ .matrix_key_rows = 7,
+ .matrix_key_cols = 7,
+ .matrix_keymap_data = &tavorevb_matrix_keymap_data,
+ .debounce_interval = 30,
+};
+
+static void __init tavorevb_init_keypad(void)
+{
+ pxa_set_keypad_info(&tavorevb_keypad_info);
+}
+#else
+static inline void tavorevb_init_keypad(void) {}
+#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup tavorevb_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000,
+ PWM_POLARITY_NORMAL),
+ PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
+ [0] = {
+ /* primary backlight */
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .enable_gpio = -1,
+ },
+ [1] = {
+ /* secondary backlight */
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .enable_gpio = -1,
+ },
+};
+
+static struct platform_device tavorevb_backlight_devices[] = {
+ [0] = {
+ .name = "pwm-backlight",
+ .id = 0,
+ .dev = {
+ .platform_data = &tavorevb_backlight_data[0],
+ },
+ },
+ [1] = {
+ .name = "pwm-backlight",
+ .id = 1,
+ .dev = {
+ .platform_data = &tavorevb_backlight_data[1],
+ },
+ },
+};
+
+static uint16_t panel_init[] = {
+ /* DSTB OUT */
+ SMART_CMD(0x00),
+ SMART_CMD_NOOP,
+ SMART_DELAY(1),
+
+ SMART_CMD(0x00),
+ SMART_CMD_NOOP,
+ SMART_DELAY(1),
+
+ SMART_CMD(0x00),
+ SMART_CMD_NOOP,
+ SMART_DELAY(1),
+
+ /* STB OUT */
+ SMART_CMD(0x00),
+ SMART_CMD(0x1D),
+ SMART_DAT(0x00),
+ SMART_DAT(0x05),
+ SMART_DELAY(1),
+
+ /* P-ON Init sequence */
+ SMART_CMD(0x00), /* OSC ON */
+ SMART_CMD(0x00),
+ SMART_DAT(0x00),
+ SMART_DAT(0x01),
+ SMART_CMD(0x00),
+ SMART_CMD(0x01), /* SOURCE DRIVER SHIFT DIRECTION and display RAM setting */
+ SMART_DAT(0x01),
+ SMART_DAT(0x27),
+ SMART_CMD(0x00),
+ SMART_CMD(0x02), /* LINE INV */
+ SMART_DAT(0x02),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x03), /* IF mode(1) */
+ SMART_DAT(0x01), /* 8bit smart mode(8-8),high speed write mode */
+ SMART_DAT(0x30),
+ SMART_CMD(0x07),
+ SMART_CMD(0x00), /* RAM Write Mode */
+ SMART_DAT(0x00),
+ SMART_DAT(0x03),
+ SMART_CMD(0x00),
+
+ /* DISPLAY Setting, 262K, fixed(NO scroll), no split screen */
+ SMART_CMD(0x07),
+ SMART_DAT(0x40), /* 16/18/19 BPP */
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x08), /* BP, FP Seting, BP=2H, FP=3H */
+ SMART_DAT(0x03),
+ SMART_DAT(0x02),
+ SMART_CMD(0x00),
+ SMART_CMD(0x0C), /* IF mode(2), using internal clock & MPU */
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x0D), /* Frame setting, 1Min. Frequence, 16CLK */
+ SMART_DAT(0x00),
+ SMART_DAT(0x10),
+ SMART_CMD(0x00),
+ SMART_CMD(0x12), /* Timing(1),ASW W=4CLK, ASW ST=1CLK */
+ SMART_DAT(0x03),
+ SMART_DAT(0x02),
+ SMART_CMD(0x00),
+ SMART_CMD(0x13), /* Timing(2),OEV ST=0.5CLK, OEV ED=1CLK */
+ SMART_DAT(0x01),
+ SMART_DAT(0x02),
+ SMART_CMD(0x00),
+ SMART_CMD(0x14), /* Timing(3), ASW HOLD=0.5CLK */
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x15), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
+ SMART_DAT(0x20),
+ SMART_DAT(0x00),
+ SMART_CMD(0x00),
+ SMART_CMD(0x1C),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x03),
+ SMART_CMD(0x00),
+ SMART_DAT(0x04),
+ SMART_DAT(0x03),
+ SMART_CMD(0x03),
+ SMART_CMD(0x01),
+ SMART_DAT(0x03),
+ SMART_DAT(0x04),
+ SMART_CMD(0x03),
+ SMART_CMD(0x02),
+ SMART_DAT(0x04),
+ SMART_DAT(0x03),
+ SMART_CMD(0x03),
+ SMART_CMD(0x03),
+ SMART_DAT(0x03),
+ SMART_DAT(0x03),
+ SMART_CMD(0x03),
+ SMART_CMD(0x04),
+ SMART_DAT(0x01),
+ SMART_DAT(0x01),
+ SMART_CMD(0x03),
+ SMART_CMD(0x05),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x04),
+ SMART_CMD(0x02),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x04),
+ SMART_CMD(0x03),
+ SMART_DAT(0x01),
+ SMART_DAT(0x3F),
+ SMART_DELAY(0),
+
+ /* DISP RAM setting: 240*320 */
+ SMART_CMD(0x04), /* HADDR, START 0 */
+ SMART_CMD(0x06),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00), /* x1,3 */
+ SMART_CMD(0x04), /* HADDR, END 4 */
+ SMART_CMD(0x07),
+ SMART_DAT(0x00),
+ SMART_DAT(0xEF), /* x2, 7 */
+ SMART_CMD(0x04), /* VADDR, START 8 */
+ SMART_CMD(0x08),
+ SMART_DAT(0x00), /* y1, 10 */
+ SMART_DAT(0x00), /* y1, 11 */
+ SMART_CMD(0x04), /* VADDR, END 12 */
+ SMART_CMD(0x09),
+ SMART_DAT(0x01), /* y2, 14 */
+ SMART_DAT(0x3F), /* y2, 15 */
+ SMART_CMD(0x02), /* RAM ADDR SETTING 16 */
+ SMART_CMD(0x00),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00), /* x1, 19 */
+ SMART_CMD(0x02), /* RAM ADDR SETTING 20 */
+ SMART_CMD(0x01),
+ SMART_DAT(0x00), /* y1, 22 */
+ SMART_DAT(0x00), /* y1, 23 */
+};
+
+static uint16_t panel_on[] = {
+ /* Power-IC ON */
+ SMART_CMD(0x01),
+ SMART_CMD(0x02),
+ SMART_DAT(0x07),
+ SMART_DAT(0x7D),
+ SMART_CMD(0x01),
+ SMART_CMD(0x03),
+ SMART_DAT(0x00),
+ SMART_DAT(0x05),
+ SMART_CMD(0x01),
+ SMART_CMD(0x04),
+ SMART_DAT(0x00),
+ SMART_DAT(0x00),
+ SMART_CMD(0x01),
+ SMART_CMD(0x05),
+ SMART_DAT(0x00),
+ SMART_DAT(0x15),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xC0),
+ SMART_DAT(0x10),
+ SMART_DELAY(30),
+
+ /* DISP ON */
+ SMART_CMD(0x01),
+ SMART_CMD(0x01),
+ SMART_DAT(0x00),
+ SMART_DAT(0x01),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xFF),
+ SMART_DAT(0xFE),
+ SMART_DELAY(150),
+};
+
+static uint16_t panel_off[] = {
+ SMART_CMD(0x00),
+ SMART_CMD(0x1E),
+ SMART_DAT(0x00),
+ SMART_DAT(0x0A),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xFF),
+ SMART_DAT(0xEE),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xF8),
+ SMART_DAT(0x12),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xE8),
+ SMART_DAT(0x11),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0xC0),
+ SMART_DAT(0x11),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0x40),
+ SMART_DAT(0x11),
+ SMART_CMD(0x01),
+ SMART_CMD(0x00),
+ SMART_DAT(0x00),
+ SMART_DAT(0x10),
+};
+
+static uint16_t update_framedata[] = {
+ /* write ram */
+ SMART_CMD(0x02),
+ SMART_CMD(0x02),
+
+ /* write frame data */
+ SMART_CMD_WRITE_FRAME,
+};
+
+static void ltm020d550_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+ struct fb_info *info = container_of(var, struct fb_info, var);
+
+ if (on) {
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_init));
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_on));
+ } else {
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_off));
+ }
+
+ if (pxafb_smart_flush(info))
+ pr_err("%s: timed out\n", __func__);
+}
+
+static void ltm020d550_update(struct fb_info *info)
+{
+ pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
+ pxafb_smart_flush(info);
+}
+
+static struct pxafb_mode_info toshiba_ltm020d550_modes[] = {
+ [0] = {
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .a0csrd_set_hld = 30,
+ .a0cswr_set_hld = 30,
+ .wr_pulse_width = 30,
+ .rd_pulse_width = 170,
+ .op_hold_time = 30,
+ .cmd_inh_time = 60,
+
+ /* L_LCLK_A0 and L_LCLK_RD active low */
+ .sync = FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT,
+ },
+};
+
+static struct pxafb_mach_info tavorevb_lcd_info = {
+ .modes = toshiba_ltm020d550_modes,
+ .num_modes = 1,
+ .lcd_conn = LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_lcd_power = ltm020d550_lcd_power,
+ .smart_update = ltm020d550_update,
+};
+
+static void __init tavorevb_init_lcd(void)
+{
+ pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup));
+ platform_device_register(&tavorevb_backlight_devices[0]);
+ platform_device_register(&tavorevb_backlight_devices[1]);
+ pxa_set_fb_info(NULL, &tavorevb_lcd_info);
+}
+#else
+static inline void tavorevb_init_lcd(void) {}
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
+static void __init tavorevb_init(void)
+{
+ /* initialize MFP configurations */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ platform_device_register(&smc91x_device);
+
+ tavorevb_init_lcd();
+ tavorevb_init_keypad();
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+ /* Maintainer: Eric Miao <eric.miao@marvell.com> */
+ .atag_offset = 0x100,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = tavorevb_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
new file mode 100644
index 0000000..8360608
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -0,0 +1,138 @@
+/*
+ * Bluetooth built-in chip control
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+#include "tosa_bt.h"
+
+static void tosa_bt_on(struct tosa_bt_data *data)
+{
+ gpio_set_value(data->gpio_reset, 0);
+ gpio_set_value(data->gpio_pwr, 1);
+ gpio_set_value(data->gpio_reset, 1);
+ mdelay(20);
+ gpio_set_value(data->gpio_reset, 0);
+}
+
+static void tosa_bt_off(struct tosa_bt_data *data)
+{
+ gpio_set_value(data->gpio_reset, 1);
+ mdelay(10);
+ gpio_set_value(data->gpio_pwr, 0);
+ gpio_set_value(data->gpio_reset, 0);
+}
+
+static int tosa_bt_set_block(void *data, bool blocked)
+{
+ pr_info("BT_RADIO going: %s\n", blocked ? "off" : "on");
+
+ if (!blocked) {
+ pr_info("TOSA_BT: going ON\n");
+ tosa_bt_on(data);
+ } else {
+ pr_info("TOSA_BT: going OFF\n");
+ tosa_bt_off(data);
+ }
+
+ return 0;
+}
+
+static const struct rfkill_ops tosa_bt_rfkill_ops = {
+ .set_block = tosa_bt_set_block,
+};
+
+static int tosa_bt_probe(struct platform_device *dev)
+{
+ int rc;
+ struct rfkill *rfk;
+
+ struct tosa_bt_data *data = dev->dev.platform_data;
+
+ rc = gpio_request(data->gpio_reset, "Bluetooth reset");
+ if (rc)
+ goto err_reset;
+ rc = gpio_direction_output(data->gpio_reset, 0);
+ if (rc)
+ goto err_reset_dir;
+ rc = gpio_request(data->gpio_pwr, "Bluetooth power");
+ if (rc)
+ goto err_pwr;
+ rc = gpio_direction_output(data->gpio_pwr, 0);
+ if (rc)
+ goto err_pwr_dir;
+
+ rfk = rfkill_alloc("tosa-bt", &dev->dev, RFKILL_TYPE_BLUETOOTH,
+ &tosa_bt_rfkill_ops, data);
+ if (!rfk) {
+ rc = -ENOMEM;
+ goto err_rfk_alloc;
+ }
+
+ rc = rfkill_register(rfk);
+ if (rc)
+ goto err_rfkill;
+
+ platform_set_drvdata(dev, rfk);
+
+ return 0;
+
+err_rfkill:
+ rfkill_destroy(rfk);
+err_rfk_alloc:
+ tosa_bt_off(data);
+err_pwr_dir:
+ gpio_free(data->gpio_pwr);
+err_pwr:
+err_reset_dir:
+ gpio_free(data->gpio_reset);
+err_reset:
+ return rc;
+}
+
+static int tosa_bt_remove(struct platform_device *dev)
+{
+ struct tosa_bt_data *data = dev->dev.platform_data;
+ struct rfkill *rfk = platform_get_drvdata(dev);
+
+ platform_set_drvdata(dev, NULL);
+
+ if (rfk) {
+ rfkill_unregister(rfk);
+ rfkill_destroy(rfk);
+ }
+ rfk = NULL;
+
+ tosa_bt_off(data);
+
+ gpio_free(data->gpio_pwr);
+ gpio_free(data->gpio_reset);
+
+ return 0;
+}
+
+static struct platform_driver tosa_bt_driver = {
+ .probe = tosa_bt_probe,
+ .remove = tosa_bt_remove,
+
+ .driver = {
+ .name = "tosa-bt",
+ },
+};
+module_platform_driver(tosa_bt_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Bluetooth built-in chip control");
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
new file mode 100644
index 0000000..cb5cd8e
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa.c
@@ -0,0 +1,940 @@
+/*
+ * Support for Sharp SL-C6000x PDAs
+ * Model: (Tosa)
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * Based on code written by Sharp/Lineo for 2.4 kernels
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clkdev.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pm.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/power/gpio-charger.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/reboot.h>
+#include <linux/memblock.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include "pxa25x.h"
+#include <mach/reset.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include "udc.h"
+#include "tosa_bt.h"
+#include <mach/audio.h>
+#include <mach/smemc.h>
+
+#include <asm/mach/arch.h>
+#include <mach/tosa.h>
+
+#include <asm/hardware/scoop.h>
+#include <asm/mach/sharpsl_param.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long tosa_pin_config[] = {
+ GPIO78_nCS_2, /* Scoop */
+ GPIO80_nCS_4, /* tg6393xb */
+ GPIO33_nCS_5, /* Scoop */
+
+ // GPIO76 CARD_VCC_ON1
+
+ GPIO19_GPIO, /* Reset out */
+ GPIO1_RST | WAKEUP_ON_EDGE_FALL,
+
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */
+ GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */
+ GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */
+ GPIO20_GPIO, /* EAR_IN */
+ GPIO22_GPIO, /* On */
+
+ GPIO5_GPIO, /* USB_IN */
+ GPIO32_GPIO, /* Pen IRQ */
+
+ GPIO7_GPIO, /* Jacket Detect */
+ GPIO14_GPIO, /* BAT0_CRG */
+ GPIO12_GPIO, /* BAT1_CRG */
+ GPIO17_GPIO, /* BAT0_LOW */
+ GPIO84_GPIO, /* BAT1_LOW */
+ GPIO38_GPIO, /* BAT_LOCK */
+
+ GPIO11_3_6MHz,
+ GPIO15_GPIO, /* TC6393XB IRQ */
+ GPIO18_RDY,
+ GPIO27_GPIO, /* LCD Sync */
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+ GPIO9_GPIO, /* Detect */
+ GPIO10_GPIO, /* nSD_INT */
+
+ /* CF */
+ GPIO13_GPIO, /* CD_IRQ */
+ GPIO21_GPIO, /* Main Slot IRQ */
+ GPIO36_GPIO, /* Jacket Slot IRQ */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* AC97 */
+ GPIO31_AC97_SYNC,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ // GPIO79 nAUD_IRQ
+
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO37_FFUART_DSR,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* Keybd */
+ GPIO58_GPIO | MFP_LPM_DRIVE_LOW, /* Column 0 */
+ GPIO59_GPIO | MFP_LPM_DRIVE_LOW, /* Column 1 */
+ GPIO60_GPIO | MFP_LPM_DRIVE_LOW, /* Column 2 */
+ GPIO61_GPIO | MFP_LPM_DRIVE_LOW, /* Column 3 */
+ GPIO62_GPIO | MFP_LPM_DRIVE_LOW, /* Column 4 */
+ GPIO63_GPIO | MFP_LPM_DRIVE_LOW, /* Column 5 */
+ GPIO64_GPIO | MFP_LPM_DRIVE_LOW, /* Column 6 */
+ GPIO65_GPIO | MFP_LPM_DRIVE_LOW, /* Column 7 */
+ GPIO66_GPIO | MFP_LPM_DRIVE_LOW, /* Column 8 */
+ GPIO67_GPIO | MFP_LPM_DRIVE_LOW, /* Column 9 */
+ GPIO68_GPIO | MFP_LPM_DRIVE_LOW, /* Column 10 */
+ GPIO69_GPIO | MFP_LPM_DRIVE_LOW, /* Row 0 */
+ GPIO70_GPIO | MFP_LPM_DRIVE_LOW, /* Row 1 */
+ GPIO71_GPIO | MFP_LPM_DRIVE_LOW, /* Row 2 */
+ GPIO72_GPIO | MFP_LPM_DRIVE_LOW, /* Row 3 */
+ GPIO73_GPIO | MFP_LPM_DRIVE_LOW, /* Row 4 */
+ GPIO74_GPIO | MFP_LPM_DRIVE_LOW, /* Row 5 */
+ GPIO75_GPIO | MFP_LPM_DRIVE_LOW, /* Row 6 */
+
+ /* SPI */
+ GPIO81_SSP2_CLK_OUT,
+ GPIO82_SSP2_FRM_OUT,
+ GPIO83_SSP2_TXD,
+
+ /* IrDA is managed in other way */
+ GPIO46_GPIO,
+ GPIO47_GPIO,
+};
+
+/*
+ * SCOOP Device
+ */
+static struct resource tosa_scoop_resources[] = {
+ [0] = {
+ .start = TOSA_CF_PHYS,
+ .end = TOSA_CF_PHYS + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config tosa_scoop_setup = {
+ .io_dir = TOSA_SCOOP_IO_DIR,
+ .gpio_base = TOSA_SCOOP_GPIO_BASE,
+};
+
+static struct platform_device tosascoop_device = {
+ .name = "sharp-scoop",
+ .id = 0,
+ .dev = {
+ .platform_data = &tosa_scoop_setup,
+ },
+ .num_resources = ARRAY_SIZE(tosa_scoop_resources),
+ .resource = tosa_scoop_resources,
+};
+
+
+/*
+ * SCOOP Device Jacket
+ */
+static struct resource tosa_scoop_jc_resources[] = {
+ [0] = {
+ .start = TOSA_SCOOP_PHYS + 0x40,
+ .end = TOSA_SCOOP_PHYS + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config tosa_scoop_jc_setup = {
+ .io_dir = TOSA_SCOOP_JC_IO_DIR,
+ .gpio_base = TOSA_SCOOP_JC_GPIO_BASE,
+};
+
+static struct platform_device tosascoop_jc_device = {
+ .name = "sharp-scoop",
+ .id = 1,
+ .dev = {
+ .platform_data = &tosa_scoop_jc_setup,
+ .parent = &tosascoop_device.dev,
+ },
+ .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources),
+ .resource = tosa_scoop_jc_resources,
+};
+
+/*
+ * PCMCIA
+ */
+static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
+{
+ .dev = &tosascoop_device.dev,
+ .irq = TOSA_IRQ_GPIO_CF_IRQ,
+ .cd_irq = TOSA_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+},{
+ .dev = &tosascoop_jc_device.dev,
+ .irq = TOSA_IRQ_GPIO_JC_CF_IRQ,
+ .cd_irq = -1,
+},
+};
+
+static struct scoop_pcmcia_config tosa_pcmcia_config = {
+ .devs = &tosa_pcmcia_scoop[0],
+ .num_devs = 2,
+};
+
+/*
+ * USB Device Controller
+ */
+static struct gpio_vbus_mach_info tosa_udc_info = {
+ .gpio_pullup = TOSA_GPIO_USB_PULLUP,
+ .gpio_vbus = TOSA_GPIO_USB_IN,
+ .gpio_vbus_inverted = 1,
+};
+
+static struct platform_device tosa_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &tosa_udc_info,
+ },
+};
+
+/*
+ * MMC/SD Device
+ */
+static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
+{
+ int err;
+
+ err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
+ if (err) {
+ printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+ goto err_gpio_int;
+ }
+ err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+ if (err)
+ goto err_gpio_int_dir;
+
+ return 0;
+
+err_gpio_int_dir:
+ gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
+ return err;
+}
+
+static void tosa_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(TOSA_GPIO_nSD_INT);
+}
+
+static struct pxamci_platform_data tosa_mci_platform_data = {
+ .detect_delay_ms = 250,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = tosa_mci_init,
+ .exit = tosa_mci_exit,
+ .gpio_card_detect = TOSA_GPIO_nSD_DETECT,
+ .gpio_card_ro = TOSA_GPIO_SD_WP,
+ .gpio_power = TOSA_GPIO_PWR_ON,
+};
+
+/*
+ * Irda
+ */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+ if (mode & IR_OFF) {
+ gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+ pxa2xx_transceiver_mode(dev, mode);
+ gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+ } else {
+ pxa2xx_transceiver_mode(dev, mode);
+ gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
+ }
+}
+
+static int tosa_irda_startup(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+ if (ret)
+ goto err_tx;
+ ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+ if (ret)
+ goto err_tx_dir;
+
+ ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
+ if (ret)
+ goto err_pwr;
+
+ ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
+ if (ret)
+ goto err_pwr_dir;
+
+ tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+
+ return 0;
+
+err_pwr_dir:
+ gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+ gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+ return ret;
+}
+
+static void tosa_irda_shutdown(struct device *dev)
+{
+ tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+ gpio_free(TOSA_GPIO_IR_POWERDWN);
+ gpio_free(TOSA_GPIO_IRDA_TX);
+}
+
+static struct pxaficp_platform_data tosa_ficp_platform_data = {
+ .gpio_pwdown = -1,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = tosa_irda_transceiver_mode,
+ .startup = tosa_irda_startup,
+ .shutdown = tosa_irda_shutdown,
+};
+
+/*
+ * Tosa AC IN
+ */
+static char *tosa_ac_supplied_to[] = {
+ "main-battery",
+ "backup-battery",
+ "jacket-battery",
+};
+
+static struct gpio_charger_platform_data tosa_power_data = {
+ .name = "charger",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .gpio = TOSA_GPIO_AC_IN,
+ .gpio_active_low = 1,
+ .supplied_to = tosa_ac_supplied_to,
+ .num_supplicants = ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+ {
+ .name = "ac",
+ .start = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
+ .end = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
+ .flags = IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct platform_device tosa_power_device = {
+ .name = "gpio-charger",
+ .id = -1,
+ .dev.platform_data = &tosa_power_data,
+ .resource = tosa_power_resource,
+ .num_resources = ARRAY_SIZE(tosa_power_resource),
+};
+
+/*
+ * Tosa Keyboard
+ */
+static const uint32_t tosakbd_keymap[] = {
+ KEY(0, 1, KEY_W),
+ KEY(0, 5, KEY_K),
+ KEY(0, 6, KEY_BACKSPACE),
+ KEY(0, 7, KEY_P),
+ KEY(1, 0, KEY_Q),
+ KEY(1, 1, KEY_E),
+ KEY(1, 2, KEY_T),
+ KEY(1, 3, KEY_Y),
+ KEY(1, 5, KEY_O),
+ KEY(1, 6, KEY_I),
+ KEY(1, 7, KEY_COMMA),
+ KEY(2, 0, KEY_A),
+ KEY(2, 1, KEY_D),
+ KEY(2, 2, KEY_G),
+ KEY(2, 3, KEY_U),
+ KEY(2, 5, KEY_L),
+ KEY(2, 6, KEY_ENTER),
+ KEY(2, 7, KEY_DOT),
+ KEY(3, 0, KEY_Z),
+ KEY(3, 1, KEY_C),
+ KEY(3, 2, KEY_V),
+ KEY(3, 3, KEY_J),
+ KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
+ KEY(3, 5, TOSA_KEY_CANCEL),
+ KEY(3, 6, TOSA_KEY_CENTER),
+ KEY(3, 7, TOSA_KEY_OK),
+ KEY(3, 8, KEY_LEFTSHIFT),
+ KEY(4, 0, KEY_S),
+ KEY(4, 1, KEY_R),
+ KEY(4, 2, KEY_B),
+ KEY(4, 3, KEY_N),
+ KEY(4, 4, TOSA_KEY_CALENDAR),
+ KEY(4, 5, TOSA_KEY_HOMEPAGE),
+ KEY(4, 6, KEY_LEFTCTRL),
+ KEY(4, 7, TOSA_KEY_LIGHT),
+ KEY(4, 9, KEY_RIGHTSHIFT),
+ KEY(5, 0, KEY_TAB),
+ KEY(5, 1, KEY_SLASH),
+ KEY(5, 2, KEY_H),
+ KEY(5, 3, KEY_M),
+ KEY(5, 4, TOSA_KEY_MENU),
+ KEY(5, 6, KEY_UP),
+ KEY(5, 10, TOSA_KEY_FN),
+ KEY(6, 0, KEY_X),
+ KEY(6, 1, KEY_F),
+ KEY(6, 2, KEY_SPACE),
+ KEY(6, 3, KEY_APOSTROPHE),
+ KEY(6, 4, TOSA_KEY_MAIL),
+ KEY(6, 5, KEY_LEFT),
+ KEY(6, 6, KEY_DOWN),
+ KEY(6, 7, KEY_RIGHT),
+};
+
+static struct matrix_keymap_data tosakbd_keymap_data = {
+ .keymap = tosakbd_keymap,
+ .keymap_size = ARRAY_SIZE(tosakbd_keymap),
+};
+
+static const int tosakbd_col_gpios[] =
+ { 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
+static const int tosakbd_row_gpios[] =
+ { 69, 70, 71, 72, 73, 74, 75 };
+
+static struct matrix_keypad_platform_data tosakbd_pdata = {
+ .keymap_data = &tosakbd_keymap_data,
+ .row_gpios = tosakbd_row_gpios,
+ .col_gpios = tosakbd_col_gpios,
+ .num_row_gpios = ARRAY_SIZE(tosakbd_row_gpios),
+ .num_col_gpios = ARRAY_SIZE(tosakbd_col_gpios),
+ .col_scan_delay_us = 10,
+ .debounce_ms = 10,
+ .wakeup = 1,
+};
+
+static struct platform_device tosakbd_device = {
+ .name = "matrix-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &tosakbd_pdata,
+ },
+};
+
+static struct gpio_keys_button tosa_gpio_keys[] = {
+ /*
+ * Two following keys are directly tied to "ON" button of tosa. Why?
+ * The first one can be used as a wakeup source, the second can't;
+ * also the first one is OR of ac_powered and on_button.
+ */
+ {
+ .type = EV_PWR,
+ .code = KEY_RESERVED,
+ .gpio = TOSA_GPIO_POWERON,
+ .desc = "Poweron",
+ .wakeup = 1,
+ .active_low = 1,
+ },
+ {
+ .type = EV_PWR,
+ .code = KEY_SUSPEND,
+ .gpio = TOSA_GPIO_ON_KEY,
+ .desc = "On key",
+ /*
+ * can't be used as wakeup
+ * .wakeup = 1,
+ */
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = TOSA_KEY_RECORD,
+ .gpio = TOSA_GPIO_RECORD_BTN,
+ .desc = "Record Button",
+ .wakeup = 1,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = TOSA_KEY_SYNC,
+ .gpio = TOSA_GPIO_SYNC,
+ .desc = "Sync Button",
+ .wakeup = 1,
+ .active_low = 1,
+ },
+ {
+ .type = EV_SW,
+ .code = SW_HEADPHONE_INSERT,
+ .gpio = TOSA_GPIO_EAR_IN,
+ .desc = "HeadPhone insert",
+ .active_low = 1,
+ .debounce_interval = 300,
+ },
+};
+
+static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
+ .buttons = tosa_gpio_keys,
+ .nbuttons = ARRAY_SIZE(tosa_gpio_keys),
+};
+
+static struct platform_device tosa_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &tosa_gpio_keys_platform_data,
+ },
+};
+
+/*
+ * Tosa LEDs
+ */
+static struct gpio_led tosa_gpio_leds[] = {
+ {
+ .name = "tosa:amber:charge",
+ .default_trigger = "main-battery-charging",
+ .gpio = TOSA_GPIO_CHRG_ERR_LED,
+ },
+ {
+ .name = "tosa:green:mail",
+ .default_trigger = "nand-disk",
+ .gpio = TOSA_GPIO_NOTE_LED,
+ },
+ {
+ .name = "tosa:dual:wlan",
+ .default_trigger = "none",
+ .gpio = TOSA_GPIO_WLAN_LED,
+ },
+ {
+ .name = "tosa:blue:bluetooth",
+ .default_trigger = "tosa-bt",
+ .gpio = TOSA_GPIO_BT_LED,
+ },
+};
+
+static struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
+ .leds = tosa_gpio_leds,
+ .num_leds = ARRAY_SIZE(tosa_gpio_leds),
+};
+
+static struct platform_device tosaled_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &tosa_gpio_leds_platform_data,
+ },
+};
+
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+ [0] = {
+ .start = TOSA_LCDC_PHYS,
+ .end = TOSA_LCDC_PHYS + 0x3ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+
+ [1] = {
+ .start = TOSA_IRQ_GPIO_TC6393XB_INT,
+ .end = TOSA_IRQ_GPIO_TC6393XB_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+ int rc;
+
+ rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+ if (rc)
+ goto err_req_pclr;
+ rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+ if (rc)
+ goto err_req_suspend;
+ rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
+ if (rc)
+ goto err_req_l3v;
+ rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+ if (rc)
+ goto err_dir_l3v;
+ rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+ if (rc)
+ goto err_dir_suspend;
+ rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+ if (rc)
+ goto err_dir_pclr;
+
+ mdelay(1);
+
+ gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+ mdelay(10);
+
+ gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+ gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+ return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+ gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+ gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+ gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+ return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+ gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+ gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+ gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+ return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+ gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+ mdelay(10);
+ gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+ mdelay(10);
+
+ return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+ gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+ gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+ return 0;
+}
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static const char * const probes[] = {
+ "cmdlinepart",
+ "ofpart",
+ "sharpslpart",
+ NULL,
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+ .badblock_pattern = &tosa_tc6393xb_nand_bbt,
+ .part_parsers = probes,
+};
+
+static int tosa_tc6393xb_setup(struct platform_device *dev)
+{
+ int rc;
+
+ rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON");
+ if (rc)
+ goto err_req;
+
+ rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1);
+ if (rc)
+ goto err_dir;
+
+ return rc;
+
+err_dir:
+ gpio_free(TOSA_GPIO_CARD_VCC_ON);
+err_req:
+ return rc;
+}
+
+static void tosa_tc6393xb_teardown(struct platform_device *dev)
+{
+ gpio_free(TOSA_GPIO_CARD_VCC_ON);
+}
+
+#ifdef CONFIG_MFD_TC6393XB
+static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
+ {
+ .xres = 480,
+ .yres = 640,
+ .pixclock = 0x002cdf00,/* PLL divisor */
+ .left_margin = 0x004c,
+ .right_margin = 0x005b,
+ .upper_margin = 0x0001,
+ .lower_margin = 0x000d,
+ .hsync_len = 0x0002,
+ .vsync_len = 0x0001,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },{
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 0x00e7f203,/* PLL divisor */
+ .left_margin = 0x0024,
+ .right_margin = 0x002f,
+ .upper_margin = 0x0001,
+ .lower_margin = 0x000d,
+ .hsync_len = 0x0002,
+ .vsync_len = 0x0001,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ }
+};
+
+static struct tmio_fb_data tosa_tc6393xb_fb_config = {
+ .lcd_set_power = tc6393xb_lcd_set_power,
+ .lcd_mode = tc6393xb_lcd_mode,
+ .num_modes = ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
+ .modes = &tosa_tc6393xb_lcd_mode[0],
+ .height = 82,
+ .width = 60,
+};
+#endif
+
+static struct tc6393xb_platform_data tosa_tc6393xb_data = {
+ .scr_pll2cr = 0x0cc1,
+ .scr_gper = 0x3300,
+
+ .irq_base = IRQ_BOARD_START,
+ .gpio_base = TOSA_TC6393XB_GPIO_BASE,
+ .setup = tosa_tc6393xb_setup,
+ .teardown = tosa_tc6393xb_teardown,
+
+ .enable = tosa_tc6393xb_enable,
+ .disable = tosa_tc6393xb_disable,
+ .suspend = tosa_tc6393xb_suspend,
+ .resume = tosa_tc6393xb_resume,
+
+ .nand_data = &tosa_tc6393xb_nand_config,
+#ifdef CONFIG_MFD_TC6393XB
+ .fb_data = &tosa_tc6393xb_fb_config,
+#endif
+
+ .resume_restore = 1,
+};
+
+
+static struct platform_device tc6393xb_device = {
+ .name = "tc6393xb",
+ .id = -1,
+ .dev = {
+ .platform_data = &tosa_tc6393xb_data,
+ },
+ .num_resources = ARRAY_SIZE(tc6393xb_resources),
+ .resource = tc6393xb_resources,
+};
+
+static struct tosa_bt_data tosa_bt_data = {
+ .gpio_pwr = TOSA_GPIO_BT_PWR_EN,
+ .gpio_reset = TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+ .name = "tosa-bt",
+ .id = -1,
+ .dev.platform_data = &tosa_bt_data,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+ .num_chipselect = 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "tosa-lcd",
+ // .platform_data
+ .max_speed_hz = 28750,
+ .bus_num = 2,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+static struct mtd_partition sharpsl_rom_parts[] = {
+ {
+ .name ="Boot PROM Filesystem",
+ .offset = 0x00160000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
+ .parts = sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x007fffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device sharpsl_rom_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = sharpsl_rom_resources,
+ .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+ .dev.platform_data = &sharpsl_rom_data,
+};
+
+static struct platform_device wm9712_device = {
+ .name = "wm9712-codec",
+ .id = -1,
+};
+
+static struct platform_device tosa_audio_device = {
+ .name = "tosa-audio",
+ .id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &tosascoop_device,
+ &tosascoop_jc_device,
+ &tc6393xb_device,
+ &tosa_power_device,
+ &tosakbd_device,
+ &tosa_gpio_keys_device,
+ &tosaled_device,
+ &tosa_bt_device,
+ &sharpsl_rom_device,
+ &wm9712_device,
+ &tosa_gpio_vbus,
+ &tosa_audio_device,
+};
+
+static void tosa_poweroff(void)
+{
+ pxa_restart(REBOOT_GPIO, NULL);
+}
+
+static void tosa_restart(enum reboot_mode mode, const char *cmd)
+{
+ uint32_t msc0 = __raw_readl(MSC0);
+
+ /* Bootloader magic for a reboot */
+ if((msc0 & 0xffff0000) == 0x7ff00000)
+ __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
+
+ tosa_poweroff();
+}
+
+static void __init tosa_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ gpio_set_wake(MFP_PIN_GPIO1, 1);
+ /* We can't pass to gpio-keys since it will drop the Reset altfunc */
+
+ init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
+
+ pm_power_off = tosa_poweroff;
+
+ PCFR |= PCFR_OPDE;
+
+ /* enable batt_fault */
+ PMCR = 0x01;
+
+ pxa_set_mci_info(&tosa_mci_platform_data);
+ pxa_set_ficp_info(&tosa_ficp_platform_data);
+ pxa_set_i2c_info(NULL);
+ pxa_set_ac97_info(NULL);
+ platform_scoop_config = &tosa_pcmcia_config;
+
+ pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+ clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init fixup_tosa(struct tag *tags, char **cmdline)
+{
+ sharpsl_save_param();
+ memblock_add(0xa0000000, SZ_64M);
+}
+
+MACHINE_START(TOSA, "SHARP Tosa")
+ .fixup = fixup_tosa,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = TOSA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_machine = tosa_init,
+ .init_time = pxa_timer_init,
+ .restart = tosa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa_bt.h b/arch/arm/mach-pxa/tosa_bt.h
new file mode 100644
index 0000000..efc3c3d
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa_bt.h
@@ -0,0 +1,22 @@
+/*
+ * Tosa bluetooth built-in chip control.
+ *
+ * Later it may be shared with some other platforms.
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef TOSA_BT_H
+#define TOSA_BT_H
+
+struct tosa_bt_data {
+ int gpio_pwr;
+ int gpio_reset;
+};
+
+#endif
+
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
new file mode 100644
index 0000000..55b8c50
--- /dev/null
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -0,0 +1,581 @@
+/*
+ * linux/arch/arm/mach-pxa/trizeps4.c
+ *
+ * Support for the Keith und Koep Trizeps4 Module Platform.
+ *
+ * Author: Jürgen Schindele
+ * Created: 20 02, 2006
+ * Copyright: Jürgen Schindele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/regulator/machine.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include "pxa27x.h"
+#include <mach/trizeps4.h>
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/* comment out the following line if you want to use the
+ * Standard UART from PXA for serial / irda transmission
+ * and acivate it if you have status leds connected */
+#define STATUS_LEDS_ON_STUART_PINS 1
+
+/*****************************************************************************
+ * MultiFunctionPins of CPU
+ *****************************************************************************/
+static unsigned long trizeps4_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO15_nCS_1, /* DiskOnChip CS */
+ GPIO93_GPIO, /* TRIZEPS4_DOC_IRQ */
+ GPIO94_GPIO, /* DOC lock */
+
+ GPIO78_nCS_2, /* DM9000 CS */
+ GPIO101_GPIO, /* TRIZEPS4_ETH_IRQ */
+
+ GPIO79_nCS_3, /* Logic CS */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* Logic irq */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* LCD - 16bpp Active TFT */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* UART */
+ GPIO9_FFUART_CTS,
+ GPIO10_FFUART_DCD,
+ GPIO16_FFUART_TXD,
+ GPIO33_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO82_FFUART_DTR,
+ GPIO83_FFUART_RTS,
+ GPIO96_FFUART_RXD,
+
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+#ifdef STATUS_LEDS_ON_STUART_PINS
+ GPIO46_GPIO,
+ GPIO47_GPIO,
+#else
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+#endif
+ /* PCMCIA */
+ GPIO11_GPIO, /* TRIZEPS4_CD_IRQ */
+ GPIO13_GPIO, /* TRIZEPS4_READY_NINT */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO102_nPCE_1,
+ GPIO104_PSKTSEL,
+
+ /* MultiMediaCard */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO12_GPIO, /* TRIZEPS4_MMC_IRQ */
+
+ /* USB OHCI */
+ GPIO88_USBH1_PWR, /* USBHPWR1 */
+ GPIO89_USBH1_PEN, /* USBHPEN1 */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+};
+
+static unsigned long trizeps4wl_pin_config[] __initdata = {
+ /* SSP 2 */
+ GPIO14_SSP2_SFRM,
+ GPIO19_SSP2_SCLK,
+ GPIO53_GPIO, /* TRIZEPS4_SPI_IRQ */
+ GPIO86_SSP2_RXD,
+ GPIO87_SSP2_TXD,
+};
+
+/****************************************************************************
+ * ONBOARD FLASH
+ ****************************************************************************/
+static struct mtd_partition trizeps4_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Backup",
+ .offset = 0x00040000,
+ .size = 0x00040000,
+ }, {
+ .name = "Image",
+ .offset = 0x00080000,
+ .size = 0x01080000,
+ }, {
+ .name = "IPSM",
+ .offset = 0x01100000,
+ .size = 0x00e00000,
+ }, {
+ .name = "Registry",
+ .offset = 0x01f00000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data trizeps4_flash_data[] = {
+ {
+ .width = 4, /* bankwidth in bytes */
+ .parts = trizeps4_partitions,
+ .nr_parts = ARRAY_SIZE(trizeps4_partitions)
+ }
+};
+
+static struct resource flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = trizeps4_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/****************************************************************************
+ * DAVICOM DM9000 Ethernet
+ ****************************************************************************/
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = TRIZEPS4_ETH_PHYS+0x300,
+ .end = TRIZEPS4_ETH_PHYS+0x400-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = TRIZEPS4_ETH_PHYS+0x8300,
+ .end = TRIZEPS4_ETH_PHYS+0x8400-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = TRIZEPS4_ETH_IRQ,
+ .end = TRIZEPS4_ETH_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct dm9000_plat_data tri_dm9000_platdata = {
+ .flags = DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+ .dev = {
+ .platform_data = &tri_dm9000_platdata,
+ }
+};
+
+/****************************************************************************
+ * LED's on GPIO pins of PXA
+ ****************************************************************************/
+static struct gpio_led trizeps4_led[] = {
+#ifdef STATUS_LEDS_ON_STUART_PINS
+ {
+ .name = "led0:orange:heartbeat", /* */
+ .default_trigger = "heartbeat",
+ .gpio = GPIO_HEARTBEAT_LED,
+ .active_low = 1,
+ },
+ {
+ .name = "led1:yellow:cpubusy", /* */
+ .default_trigger = "cpu-busy",
+ .gpio = GPIO_SYS_BUSY_LED,
+ .active_low = 1,
+ },
+#endif
+};
+
+static struct gpio_led_platform_data trizeps4_led_data = {
+ .leds = trizeps4_led,
+ .num_leds = ARRAY_SIZE(trizeps4_led),
+};
+
+static struct platform_device leds_devices = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &trizeps4_led_data,
+ },
+};
+
+static struct platform_device *trizeps4_devices[] __initdata = {
+ &flash_device,
+ &dm9000_device,
+ &leds_devices,
+};
+
+static struct platform_device *trizeps4wl_devices[] __initdata = {
+ &flash_device,
+ &leds_devices,
+};
+
+static short trizeps_conxs_bcr;
+
+/* PCCARD power switching supports only 3,3V */
+void board_pcmcia_power(int power)
+{
+ if (power) {
+ /* switch power on, put in reset and enable buffers */
+ trizeps_conxs_bcr |= power;
+ trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+ trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
+ BCR_writew(trizeps_conxs_bcr);
+ /* wait a little */
+ udelay(2000);
+ /* take reset away */
+ trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
+ BCR_writew(trizeps_conxs_bcr);
+ udelay(2000);
+ } else {
+ /* put in reset */
+ trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+ BCR_writew(trizeps_conxs_bcr);
+ udelay(1000);
+ /* switch power off */
+ trizeps_conxs_bcr &= ~0xf;
+ BCR_writew(trizeps_conxs_bcr);
+ }
+ pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
+ trizeps_conxs_bcr);
+}
+EXPORT_SYMBOL(board_pcmcia_power);
+
+/* backlight power switching for LCD panel */
+static void board_backlight_power(int on)
+{
+ if (on)
+ trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
+ else
+ trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
+
+ pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
+ trizeps_conxs_bcr);
+ BCR_writew(trizeps_conxs_bcr);
+}
+
+/* a I2C based RTC is known on CONXS board */
+static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
+ { I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
+};
+
+/****************************************************************************
+ * MMC card slot external to module
+ ****************************************************************************/
+static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
+ void *data)
+{
+ int err;
+
+ err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
+ IRQF_TRIGGER_RISING, "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
+ "MMC card detect IRQ\n");
+ return -1;
+ }
+ return 0;
+}
+
+static void trizeps4_mci_exit(struct device *dev, void *data)
+{
+ free_irq(TRIZEPS4_MMC_IRQ, data);
+}
+
+static struct pxamci_platform_data trizeps4_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .detect_delay_ms= 10,
+ .init = trizeps4_mci_init,
+ .exit = trizeps4_mci_exit,
+ .get_ro = NULL, /* write-protection not supported */
+ .setpower = NULL, /* power-switching not supported */
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+/****************************************************************************
+ * IRDA mode switching on stuart
+ ****************************************************************************/
+#ifndef STATUS_LEDS_ON_STUART_PINS
+static short trizeps_conxs_ircr;
+
+static int trizeps4_irda_startup(struct device *dev)
+{
+ trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+ IRCR_writew(trizeps_conxs_ircr);
+ return 0;
+}
+
+static void trizeps4_irda_shutdown(struct device *dev)
+{
+ trizeps_conxs_ircr |= ConXS_IRCR_SD;
+ IRCR_writew(trizeps_conxs_ircr);
+}
+
+static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ /* Switch mode */
+ if (mode & IR_SIRMODE)
+ trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */
+ else if (mode & IR_FIRMODE)
+ trizeps_conxs_ircr |= ConXS_IRCR_MODE; /* Fast mode */
+
+ /* Switch power */
+ if (mode & IR_OFF)
+ trizeps_conxs_ircr |= ConXS_IRCR_SD;
+ else
+ trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+
+ IRCR_writew(trizeps_conxs_ircr);
+ local_irq_restore(flags);
+
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+ .gpio_pwdown = -1,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = trizeps4_irda_transceiver_mode,
+ .startup = trizeps4_irda_startup,
+ .shutdown = trizeps4_irda_shutdown,
+};
+#endif
+
+/****************************************************************************
+ * OHCI USB port
+ ****************************************************************************/
+static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static struct map_desc trizeps4_io_desc[] __initdata = {
+ { /* ConXS CFSR */
+ .virtual = TRIZEPS4_CFSR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS BCR */
+ .virtual = TRIZEPS4_BOCR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS IRCR */
+ .virtual = TRIZEPS4_IRCR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS DCR */
+ .virtual = TRIZEPS4_DICR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS UPSR */
+ .virtual = TRIZEPS4_UPSR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ }
+};
+
+static struct pxafb_mode_info sharp_lcd_mode = {
+ .pixclock = 78000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 8,
+ .hsync_len = 4,
+ .left_margin = 4,
+ .right_margin = 4,
+ .vsync_len = 2,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info sharp_lcd = {
+ .modes = &sharp_lcd_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .pxafb_backlight_power = board_backlight_power,
+};
+
+static struct pxafb_mode_info toshiba_lcd_mode = {
+ .pixclock = 39720,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 8,
+ .hsync_len = 63,
+ .left_margin = 12,
+ .right_margin = 12,
+ .vsync_len = 4,
+ .upper_margin = 32,
+ .lower_margin = 10,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info toshiba_lcd = {
+ .modes = &toshiba_lcd_mode,
+ .num_modes = 1,
+ .lcd_conn = (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .pxafb_backlight_power = board_backlight_power,
+};
+
+static void __init trizeps4_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
+ if (machine_is_trizeps4wl()) {
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
+ platform_add_devices(trizeps4wl_devices,
+ ARRAY_SIZE(trizeps4wl_devices));
+ } else {
+ platform_add_devices(trizeps4_devices,
+ ARRAY_SIZE(trizeps4_devices));
+ }
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ if (0) /* dont know how to determine LCD */
+ pxa_set_fb_info(NULL, &sharp_lcd);
+ else
+ pxa_set_fb_info(NULL, &toshiba_lcd);
+
+ pxa_set_mci_info(&trizeps4_mci_platform_data);
+#ifndef STATUS_LEDS_ON_STUART_PINS
+ pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+#endif
+ pxa_set_ohci_info(&trizeps4_ohci_platform_data);
+ pxa_set_ac97_info(NULL);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, trizeps4_i2c_devices,
+ ARRAY_SIZE(trizeps4_i2c_devices));
+
+ /* this is the reset value */
+ trizeps_conxs_bcr = 0x00A0;
+
+ BCR_writew(trizeps_conxs_bcr);
+ board_backlight_power(1);
+
+ regulator_has_full_constraints();
+}
+
+static void __init trizeps4_map_io(void)
+{
+ pxa27x_map_io();
+ iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
+
+ if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
+ /* if flash is 16 bit wide its a Trizeps4 WL */
+ __machine_arch_type = MACH_TYPE_TRIZEPS4WL;
+ trizeps4_flash_data[0].width = 2;
+ } else {
+ /* if flash is 32 bit wide its a Trizeps4 */
+ __machine_arch_type = MACH_TYPE_TRIZEPS4;
+ trizeps4_flash_data[0].width = 4;
+ }
+}
+
+MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
+ /* MAINTAINER("Jürgen Schindele") */
+ .atag_offset = 0x100,
+ .init_machine = trizeps4_init,
+ .map_io = trizeps4_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+
+MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
+ /* MAINTAINER("Jürgen Schindele") */
+ .atag_offset = 0x100,
+ .init_machine = trizeps4_init,
+ .map_io = trizeps4_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/udc.h b/arch/arm/mach-pxa/udc.h
new file mode 100644
index 0000000..9a827e3
--- /dev/null
+++ b/arch/arm/mach-pxa/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-pxa/include/mach/udc.h
+ *
+ */
+#include <linux/platform_data/pxa2xx_udc.h>
+
+extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
new file mode 100644
index 0000000..ab2f892
--- /dev/null
+++ b/arch/arm/mach-pxa/viper.c
@@ -0,0 +1,1026 @@
+/*
+ * linux/arch/arm/mach-pxa/viper.c
+ *
+ * Support for the Arcom VIPER SBC.
+ *
+ * Author: Ian Campbell
+ * Created: Feb 03, 2003
+ * Copyright: Arcom Control Systems
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ * <marc.zyngier@altran.com>
+ *
+ * Based on lubbock.c:
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/memory.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/gpio.h>
+#include <linux/jiffies.h>
+#include <linux/platform_data/i2c-gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/serial_8250.h>
+#include <linux/smc91x.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/usb/isp116x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/syscore_ops.h>
+
+#include "pxa25x.h"
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <mach/regs-uart.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
+#include "viper.h"
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/system_info.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned int icr;
+
+static void viper_icr_set_bit(unsigned int bit)
+{
+ icr |= bit;
+ VIPER_ICR = icr;
+}
+
+static void viper_icr_clear_bit(unsigned int bit)
+{
+ icr &= ~bit;
+ VIPER_ICR = icr;
+}
+
+/* This function is used from the pcmcia module to reset the CF */
+static void viper_cf_reset(int state)
+{
+ if (state)
+ viper_icr_set_bit(VIPER_ICR_CF_RST);
+ else
+ viper_icr_clear_bit(VIPER_ICR_CF_RST);
+}
+
+static struct arcom_pcmcia_pdata viper_pcmcia_info = {
+ .cd_gpio = VIPER_CF_CD_GPIO,
+ .rdy_gpio = VIPER_CF_RDY_GPIO,
+ .pwr_gpio = VIPER_CF_POWER_GPIO,
+ .reset = viper_cf_reset,
+};
+
+static struct platform_device viper_pcmcia_device = {
+ .name = "viper-pcmcia",
+ .id = -1,
+ .dev = {
+ .platform_data = &viper_pcmcia_info,
+ },
+};
+
+/*
+ * The CPLD version register was not present on VIPER boards prior to
+ * v2i1. On v1 boards where the version register is not present we
+ * will just read back the previous value from the databus.
+ *
+ * Therefore we do two reads. The first time we write 0 to the
+ * (read-only) register before reading and the second time we write
+ * 0xff first. If the two reads do not match or they read back as 0xff
+ * or 0x00 then we have version 1 hardware.
+ */
+static u8 viper_hw_version(void)
+{
+ u8 v1, v2;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ VIPER_VERSION = 0;
+ v1 = VIPER_VERSION;
+ VIPER_VERSION = 0xff;
+ v2 = VIPER_VERSION;
+
+ v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
+
+ local_irq_restore(flags);
+ return v1;
+}
+
+/* CPU system core operations. */
+static int viper_cpu_suspend(void)
+{
+ viper_icr_set_bit(VIPER_ICR_R_DIS);
+ return 0;
+}
+
+static void viper_cpu_resume(void)
+{
+ viper_icr_clear_bit(VIPER_ICR_R_DIS);
+}
+
+static struct syscore_ops viper_cpu_syscore_ops = {
+ .suspend = viper_cpu_suspend,
+ .resume = viper_cpu_resume,
+};
+
+static unsigned int current_voltage_divisor;
+
+/*
+ * If force is not true then step from existing to new divisor. If
+ * force is true then jump straight to the new divisor. Stepping is
+ * used because if the jump in voltage is too large, the VCC can dip
+ * too low and the regulator cuts out.
+ *
+ * force can be used to initialize the divisor to a know state by
+ * setting the value for the current clock speed, since we are already
+ * running at that speed we know the voltage should be pretty close so
+ * the jump won't be too large
+ */
+static void viper_set_core_cpu_voltage(unsigned long khz, int force)
+{
+ int i = 0;
+ unsigned int divisor = 0;
+ const char *v;
+
+ if (khz < 200000) {
+ v = "1.0"; divisor = 0xfff;
+ } else if (khz < 300000) {
+ v = "1.1"; divisor = 0xde5;
+ } else {
+ v = "1.3"; divisor = 0x325;
+ }
+
+ pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
+ v, (int)khz / 1000, (int)khz % 1000);
+
+#define STEP 0x100
+ do {
+ int step;
+
+ if (force)
+ step = divisor;
+ else if (current_voltage_divisor < divisor - STEP)
+ step = current_voltage_divisor + STEP;
+ else if (current_voltage_divisor > divisor + STEP)
+ step = current_voltage_divisor - STEP;
+ else
+ step = divisor;
+ force = 0;
+
+ gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+ gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+ for (i = 1 << 11 ; i > 0 ; i >>= 1) {
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+ }
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+ current_voltage_divisor = step;
+ } while (current_voltage_divisor != divisor);
+}
+
+/* Interrupt handling */
+static unsigned long viper_irq_enabled_mask;
+static const int viper_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
+static const int viper_isa_irq_map[] = {
+ 0, /* ISA irq #0, invalid */
+ 0, /* ISA irq #1, invalid */
+ 0, /* ISA irq #2, invalid */
+ 1 << 0, /* ISA irq #3 */
+ 1 << 1, /* ISA irq #4 */
+ 1 << 2, /* ISA irq #5 */
+ 1 << 3, /* ISA irq #6 */
+ 1 << 4, /* ISA irq #7 */
+ 0, /* ISA irq #8, invalid */
+ 1 << 8, /* ISA irq #9 */
+ 1 << 5, /* ISA irq #10 */
+ 1 << 6, /* ISA irq #11 */
+ 1 << 7, /* ISA irq #12 */
+ 0, /* ISA irq #13, invalid */
+ 1 << 9, /* ISA irq #14 */
+ 1 << 10, /* ISA irq #15 */
+};
+
+static inline int viper_irq_to_bitmask(unsigned int irq)
+{
+ return viper_isa_irq_map[irq - PXA_ISA_IRQ(0)];
+}
+
+static inline int viper_bit_to_irq(int bit)
+{
+ return viper_isa_irqs[bit] + PXA_ISA_IRQ(0);
+}
+
+static void viper_ack_irq(struct irq_data *d)
+{
+ int viper_irq = viper_irq_to_bitmask(d->irq);
+
+ if (viper_irq & 0xff)
+ VIPER_LO_IRQ_STATUS = viper_irq;
+ else
+ VIPER_HI_IRQ_STATUS = (viper_irq >> 8);
+}
+
+static void viper_mask_irq(struct irq_data *d)
+{
+ viper_irq_enabled_mask &= ~(viper_irq_to_bitmask(d->irq));
+}
+
+static void viper_unmask_irq(struct irq_data *d)
+{
+ viper_irq_enabled_mask |= viper_irq_to_bitmask(d->irq);
+}
+
+static inline unsigned long viper_irq_pending(void)
+{
+ return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
+ viper_irq_enabled_mask;
+}
+
+static void viper_irq_handler(struct irq_desc *desc)
+{
+ unsigned int irq;
+ unsigned long pending;
+
+ pending = viper_irq_pending();
+ do {
+ /* we're in a chained irq handler,
+ * so ack the interrupt by hand */
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+
+ if (likely(pending)) {
+ irq = viper_bit_to_irq(__ffs(pending));
+ generic_handle_irq(irq);
+ }
+ pending = viper_irq_pending();
+ } while (pending);
+}
+
+static struct irq_chip viper_irq_chip = {
+ .name = "ISA",
+ .irq_ack = viper_ack_irq,
+ .irq_mask = viper_mask_irq,
+ .irq_unmask = viper_unmask_irq
+};
+
+static void __init viper_init_irq(void)
+{
+ int level;
+ int isa_irq;
+
+ pxa25x_init_irq();
+
+ /* setup ISA IRQs */
+ for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) {
+ isa_irq = viper_bit_to_irq(level);
+ irq_set_chip_and_handler(isa_irq, &viper_irq_chip,
+ handle_edge_irq);
+ irq_clear_status_flags(isa_irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+ }
+
+ irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
+ viper_irq_handler);
+ irq_set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
+}
+
+/* Flat Panel */
+static struct pxafb_mode_info fb_mode_info[] = {
+ {
+ .pixclock = 157500,
+
+ .xres = 320,
+ .yres = 240,
+
+ .bpp = 16,
+
+ .hsync_len = 63,
+ .left_margin = 7,
+ .right_margin = 13,
+
+ .vsync_len = 20,
+ .upper_margin = 0,
+ .lower_margin = 0,
+
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info fb_info = {
+ .modes = fb_mode_info,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static struct pwm_lookup viper_pwm_lookup[] = {
+ PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+ PWM_POLARITY_NORMAL),
+};
+
+static int viper_backlight_init(struct device *dev)
+{
+ int ret;
+
+ /* GPIO9 and 10 control FB backlight. Initialise to off */
+ ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
+ if (ret)
+ goto err_request_bckl;
+
+ ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
+ if (ret)
+ goto err_request_lcd;
+
+ ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
+ if (ret)
+ goto err_dir;
+
+ ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
+ if (ret)
+ goto err_dir;
+
+ return 0;
+
+err_dir:
+ gpio_free(VIPER_LCD_EN_GPIO);
+err_request_lcd:
+ gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+err_request_bckl:
+ dev_err(dev, "Failed to setup LCD GPIOs\n");
+
+ return ret;
+}
+
+static int viper_backlight_notify(struct device *dev, int brightness)
+{
+ gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
+ gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
+
+ return brightness;
+}
+
+static void viper_backlight_exit(struct device *dev)
+{
+ gpio_free(VIPER_LCD_EN_GPIO);
+ gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+}
+
+static struct platform_pwm_backlight_data viper_backlight_data = {
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .enable_gpio = -1,
+ .init = viper_backlight_init,
+ .notify = viper_backlight_notify,
+ .exit = viper_backlight_exit,
+};
+
+static struct platform_device viper_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa25x_device_pwm0.dev,
+ .platform_data = &viper_backlight_data,
+ },
+};
+
+/* Ethernet */
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = VIPER_ETH_PHYS + 0x300,
+ .end = VIPER_ETH_PHYS + 0x30f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
+ .end = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+ [2] = {
+ .name = "smc91x-data32",
+ .start = VIPER_ETH_DATA_PHYS,
+ .end = VIPER_ETH_DATA_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct smc91x_platdata viper_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &viper_smc91x_info,
+ },
+};
+
+/* i2c */
+static struct gpiod_lookup_table viper_i2c_gpiod_table = {
+ .dev_id = "i2c-gpio.1",
+ .table = {
+ GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO,
+ NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SCL_GPIO,
+ NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ },
+};
+
+static struct i2c_gpio_platform_data i2c_bus_data = {
+ .udelay = 10,
+ .timeout = HZ,
+};
+
+static struct platform_device i2c_bus_device = {
+ .name = "i2c-gpio",
+ .id = 1, /* pxa2xx-i2c is bus 0, so start at 1 */
+ .dev = {
+ .platform_data = &i2c_bus_data,
+ }
+};
+
+static struct i2c_board_info __initdata viper_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ds1338", 0x68),
+ },
+};
+
+/*
+ * Serial configuration:
+ * You can either have the standard PXA ports driven by the PXA driver,
+ * or all the ports (PXA + 16850) driven by the 8250 driver.
+ * Choose your poison.
+ */
+
+static struct resource viper_serial_resources[] = {
+#ifndef CONFIG_SERIAL_PXA
+ {
+ .start = 0x40100000,
+ .end = 0x4010001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40200000,
+ .end = 0x4020001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40700000,
+ .end = 0x4070001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = VIPER_UARTA_PHYS,
+ .end = VIPER_UARTA_PHYS + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = VIPER_UARTB_PHYS,
+ .end = VIPER_UARTB_PHYS + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+#else
+ {
+ 0,
+ },
+#endif
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+#ifndef CONFIG_SERIAL_PXA
+ /* Internal UARTs */
+ {
+ .membase = (void *)&FFUART,
+ .mapbase = __PREG(FFUART),
+ .irq = IRQ_FFUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ {
+ .membase = (void *)&BTUART,
+ .mapbase = __PREG(BTUART),
+ .irq = IRQ_BTUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ {
+ .membase = (void *)&STUART,
+ .mapbase = __PREG(STUART),
+ .irq = IRQ_STUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ /* External UARTs */
+ {
+ .mapbase = VIPER_UARTA_PHYS,
+ .irq = PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .uartclk = 1843200,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+ UPF_SKIP_TEST,
+ },
+ {
+ .mapbase = VIPER_UARTB_PHYS,
+ .irq = PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .uartclk = 1843200,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+ UPF_SKIP_TEST,
+ },
+#endif
+ { },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(viper_serial_resources),
+ .resource = viper_serial_resources,
+};
+
+/* USB */
+static void isp116x_delay(struct device *dev, int delay)
+{
+ ndelay(delay);
+}
+
+static struct resource isp116x_resources[] = {
+ [0] = { /* DATA */
+ .start = VIPER_USB_PHYS + 0,
+ .end = VIPER_USB_PHYS + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* ADDR */
+ .start = VIPER_USB_PHYS + 2,
+ .end = VIPER_USB_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
+ .end = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data isp116x_platform_data = {
+ /* Enable internal resistors on downstream ports */
+ .sel15Kres = 1,
+ /* On-chip overcurrent protection */
+ .oc_enable = 1,
+ /* INT output polarity */
+ .int_act_high = 1,
+ /* INT edge or level triggered */
+ .int_edge_triggered = 0,
+
+ /* WAKEUP pin connected - NOT SUPPORTED */
+ /* .remote_wakeup_connected = 0, */
+ /* Wakeup by devices on usb bus enabled */
+ .remote_wakeup_enable = 0,
+ .delay = isp116x_delay,
+};
+
+static struct platform_device isp116x_device = {
+ .name = "isp116x-hcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(isp116x_resources),
+ .resource = isp116x_resources,
+ .dev = {
+ .platform_data = &isp116x_platform_data,
+ },
+
+};
+
+/* MTD */
+static struct resource mtd_resources[] = {
+ [0] = { /* RedBoot config + filesystem flash */
+ .start = VIPER_FLASH_PHYS,
+ .end = VIPER_FLASH_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* Boot flash */
+ .start = VIPER_BOOT_PHYS,
+ .end = VIPER_BOOT_PHYS + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = { /*
+ * SRAM size is actually 256KB, 8bits, with a sparse mapping
+ * (each byte is on a 16bit boundary).
+ */
+ .start = _VIPER_SRAM_BASE,
+ .end = _VIPER_SRAM_BASE + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition viper_boot_flash_partition = {
+ .name = "RedBoot",
+ .size = SZ_1M,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force R/O */
+};
+
+static struct physmap_flash_data viper_flash_data[] = {
+ [0] = {
+ .width = 2,
+ .parts = NULL,
+ .nr_parts = 0,
+ },
+ [1] = {
+ .width = 2,
+ .parts = &viper_boot_flash_partition,
+ .nr_parts = 1,
+ },
+};
+
+static struct platform_device viper_mtd_devices[] = {
+ [0] = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &viper_flash_data[0],
+ },
+ .resource = &mtd_resources[0],
+ .num_resources = 1,
+ },
+ [1] = {
+ .name = "physmap-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &viper_flash_data[1],
+ },
+ .resource = &mtd_resources[1],
+ .num_resources = 1,
+ },
+};
+
+static struct platform_device *viper_devs[] __initdata = {
+ &smc91x_device,
+ &i2c_bus_device,
+ &serial_device,
+ &isp116x_device,
+ &viper_mtd_devices[0],
+ &viper_mtd_devices[1],
+ &viper_backlight_device,
+ &viper_pcmcia_device,
+};
+
+static mfp_cfg_t viper_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* FP Backlight */
+ GPIO9_GPIO, /* VIPER_BCKLIGHT_EN_GPIO */
+ GPIO10_GPIO, /* VIPER_LCD_EN_GPIO */
+ GPIO16_PWM0_OUT,
+
+ /* Ethernet PHY Ready */
+ GPIO18_RDY,
+
+ /* Serial shutdown */
+ GPIO12_GPIO | MFP_LPM_DRIVE_HIGH, /* VIPER_UART_SHDN_GPIO */
+
+ /* Compact-Flash / PC104 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO8_GPIO, /* VIPER_CF_RDY_GPIO */
+ GPIO32_GPIO, /* VIPER_CF_CD_GPIO */
+ GPIO82_GPIO, /* VIPER_CF_POWER_GPIO */
+
+ /* Integrated UPS control */
+ GPIO20_GPIO, /* VIPER_UPS_GPIO */
+
+ /* Vcc regulator control */
+ GPIO6_GPIO, /* VIPER_PSU_DATA_GPIO */
+ GPIO11_GPIO, /* VIPER_PSU_CLK_GPIO */
+ GPIO19_GPIO, /* VIPER_PSU_nCS_LD_GPIO */
+
+ /* i2c busses */
+ GPIO26_GPIO, /* VIPER_TPM_I2C_SDA_GPIO */
+ GPIO27_GPIO, /* VIPER_TPM_I2C_SCL_GPIO */
+ GPIO83_GPIO, /* VIPER_RTC_I2C_SDA_GPIO */
+ GPIO84_GPIO, /* VIPER_RTC_I2C_SCL_GPIO */
+
+ /* PC/104 Interrupt */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* VIPER_CPLD_GPIO */
+};
+
+static unsigned long viper_tpm;
+
+static int __init viper_tpm_setup(char *str)
+{
+ return kstrtoul(str, 10, &viper_tpm) >= 0;
+}
+
+__setup("tpm=", viper_tpm_setup);
+
+struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = {
+ .dev_id = "i2c-gpio.2",
+ .table = {
+ GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO,
+ NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SCL_GPIO,
+ NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ },
+};
+
+static void __init viper_tpm_init(void)
+{
+ struct platform_device *tpm_device;
+ struct i2c_gpio_platform_data i2c_tpm_data = {
+ .udelay = 10,
+ .timeout = HZ,
+ };
+ char *errstr;
+
+ /* Allocate TPM i2c bus if requested */
+ if (!viper_tpm)
+ return;
+
+ gpiod_add_lookup_table(&viper_tpm_i2c_gpiod_table);
+ tpm_device = platform_device_alloc("i2c-gpio", 2);
+ if (tpm_device) {
+ if (!platform_device_add_data(tpm_device,
+ &i2c_tpm_data,
+ sizeof(i2c_tpm_data))) {
+ if (platform_device_add(tpm_device)) {
+ errstr = "register TPM i2c bus";
+ goto error_free_tpm;
+ }
+ } else {
+ errstr = "allocate TPM i2c bus data";
+ goto error_free_tpm;
+ }
+ } else {
+ errstr = "allocate TPM i2c device";
+ goto error_tpm;
+ }
+
+ return;
+
+error_free_tpm:
+ kfree(tpm_device);
+error_tpm:
+ pr_err("viper: Couldn't %s, giving up\n", errstr);
+}
+
+static void __init viper_init_vcore_gpios(void)
+{
+ if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
+ goto err_request_data;
+
+ if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
+ goto err_request_clk;
+
+ if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
+ goto err_request_cs;
+
+ if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
+ gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
+ gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
+ goto err_dir;
+
+ /* c/should assume redboot set the correct level ??? */
+ viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
+
+ return;
+
+err_dir:
+ gpio_free(VIPER_PSU_nCS_LD_GPIO);
+err_request_cs:
+ gpio_free(VIPER_PSU_CLK_GPIO);
+err_request_clk:
+ gpio_free(VIPER_PSU_DATA_GPIO);
+err_request_data:
+ pr_err("viper: Failed to setup vcore control GPIOs\n");
+}
+
+static void __init viper_init_serial_gpio(void)
+{
+ if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
+ goto err_request;
+
+ if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
+ goto err_dir;
+
+ return;
+
+err_dir:
+ gpio_free(VIPER_UART_SHDN_GPIO);
+err_request:
+ pr_err("viper: Failed to setup UART shutdown GPIO\n");
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int viper_cpufreq_notifier(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct cpufreq_freqs *freq = data;
+
+ /* TODO: Adjust timings??? */
+
+ switch (val) {
+ case CPUFREQ_PRECHANGE:
+ if (freq->old < freq->new) {
+ /* we are getting faster so raise the voltage
+ * before we change freq */
+ viper_set_core_cpu_voltage(freq->new, 0);
+ }
+ break;
+ case CPUFREQ_POSTCHANGE:
+ if (freq->old > freq->new) {
+ /* we are slowing down so drop the power
+ * after we change freq */
+ viper_set_core_cpu_voltage(freq->new, 0);
+ }
+ break;
+ default:
+ /* ignore */
+ break;
+ }
+
+ return 0;
+}
+
+static struct notifier_block viper_cpufreq_notifier_block = {
+ .notifier_call = viper_cpufreq_notifier
+};
+
+static void __init viper_init_cpufreq(void)
+{
+ if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER))
+ pr_err("viper: Failed to setup cpufreq notifier\n");
+}
+#else
+static inline void viper_init_cpufreq(void) {}
+#endif
+
+static void viper_power_off(void)
+{
+ pr_notice("Shutting off UPS\n");
+ gpio_set_value(VIPER_UPS_GPIO, 1);
+ /* Spin to death... */
+ while (1);
+}
+
+static void __init viper_init(void)
+{
+ u8 version;
+
+ pm_power_off = viper_power_off;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ /* Wake-up serial console */
+ viper_init_serial_gpio();
+
+ pxa_set_fb_info(NULL, &fb_info);
+
+ /* v1 hardware cannot use the datacs line */
+ version = viper_hw_version();
+ if (version == 0)
+ smc91x_device.num_resources--;
+
+ pxa_set_i2c_info(NULL);
+ gpiod_add_lookup_table(&viper_i2c_gpiod_table);
+ pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup));
+ platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
+
+ viper_init_vcore_gpios();
+ viper_init_cpufreq();
+
+ register_syscore_ops(&viper_cpu_syscore_ops);
+
+ if (version) {
+ pr_info("viper: hardware v%di%d detected. "
+ "CPLD revision %d.\n",
+ VIPER_BOARD_VERSION(version),
+ VIPER_BOARD_ISSUE(version),
+ VIPER_CPLD_REVISION(version));
+ system_rev = (VIPER_BOARD_VERSION(version) << 8) |
+ (VIPER_BOARD_ISSUE(version) << 4) |
+ VIPER_CPLD_REVISION(version);
+ } else {
+ pr_info("viper: No version register.\n");
+ }
+
+ i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
+
+ viper_tpm_init();
+ pxa_set_ac97_info(NULL);
+}
+
+static struct map_desc viper_io_desc[] __initdata = {
+ {
+ .virtual = VIPER_CPLD_BASE,
+ .pfn = __phys_to_pfn(VIPER_CPLD_PHYS),
+ .length = 0x00300000,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = VIPER_PC104IO_BASE,
+ .pfn = __phys_to_pfn(0x30000000),
+ .length = 0x00800000,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init viper_map_io(void)
+{
+ pxa25x_map_io();
+
+ iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
+
+ PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
+ /* Maintainer: Marc Zyngier <maz@misterjones.org> */
+ .atag_offset = 0x100,
+ .map_io = viper_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = viper_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = viper_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.h b/arch/arm/mach-pxa/viper.h
new file mode 100644
index 0000000..5f5fbf1
--- /dev/null
+++ b/arch/arm/mach-pxa/viper.h
@@ -0,0 +1,94 @@
+/*
+ * arch/arm/mach-pxa/include/mach/viper.h
+ *
+ * Author: Ian Campbell
+ * Created: Feb 03, 2003
+ * Copyright: Arcom Control Systems.
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ * <marc.zyngier@altran.com>
+ *
+ * Created based on lubbock.h:
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_VIPER_H
+#define ARCH_VIPER_H
+
+#define VIPER_BOOT_PHYS PXA_CS0_PHYS
+#define VIPER_FLASH_PHYS PXA_CS1_PHYS
+#define VIPER_ETH_PHYS PXA_CS2_PHYS
+#define VIPER_USB_PHYS PXA_CS3_PHYS
+#define VIPER_ETH_DATA_PHYS PXA_CS4_PHYS
+#define VIPER_CPLD_PHYS PXA_CS5_PHYS
+
+#define VIPER_CPLD_BASE (0xf0000000)
+#define VIPER_PC104IO_BASE (0xf1000000)
+#define VIPER_USB_BASE (0xf1800000)
+
+#define VIPER_ETH_GPIO (0)
+#define VIPER_CPLD_GPIO (1)
+#define VIPER_USB_GPIO (2)
+#define VIPER_UARTA_GPIO (4)
+#define VIPER_UARTB_GPIO (3)
+#define VIPER_CF_CD_GPIO (32)
+#define VIPER_CF_RDY_GPIO (8)
+#define VIPER_BCKLIGHT_EN_GPIO (9)
+#define VIPER_LCD_EN_GPIO (10)
+#define VIPER_PSU_DATA_GPIO (6)
+#define VIPER_PSU_CLK_GPIO (11)
+#define VIPER_UART_SHDN_GPIO (12)
+#define VIPER_BRIGHTNESS_GPIO (16)
+#define VIPER_PSU_nCS_LD_GPIO (19)
+#define VIPER_UPS_GPIO (20)
+#define VIPER_CF_POWER_GPIO (82)
+#define VIPER_TPM_I2C_SDA_GPIO (26)
+#define VIPER_TPM_I2C_SCL_GPIO (27)
+#define VIPER_RTC_I2C_SDA_GPIO (83)
+#define VIPER_RTC_I2C_SCL_GPIO (84)
+
+#define VIPER_CPLD_P2V(x) ((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE)
+#define VIPER_CPLD_V2P(x) ((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __VIPER_CPLD_REG(x) (*((volatile u16 *)VIPER_CPLD_P2V(x)))
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */
+
+/* ... Physical addresses */
+#define _VIPER_LO_IRQ_STATUS (VIPER_CPLD_PHYS + 0x100000)
+#define _VIPER_ICR_PHYS (VIPER_CPLD_PHYS + 0x100002)
+#define _VIPER_HI_IRQ_STATUS (VIPER_CPLD_PHYS + 0x100004)
+#define _VIPER_VERSION_PHYS (VIPER_CPLD_PHYS + 0x100006)
+#define VIPER_UARTA_PHYS (VIPER_CPLD_PHYS + 0x300010)
+#define VIPER_UARTB_PHYS (VIPER_CPLD_PHYS + 0x300000)
+#define _VIPER_SRAM_BASE (VIPER_CPLD_PHYS + 0x800000)
+
+/* ... Virtual addresses */
+#define VIPER_LO_IRQ_STATUS __VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS)
+#define VIPER_HI_IRQ_STATUS __VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS)
+#define VIPER_VERSION __VIPER_CPLD_REG(_VIPER_VERSION_PHYS)
+#define VIPER_ICR __VIPER_CPLD_REG(_VIPER_ICR_PHYS)
+
+/* Decode VIPER_VERSION register */
+#define VIPER_CPLD_REVISION(x) (((x) >> 5) & 0x7)
+#define VIPER_BOARD_VERSION(x) (((x) >> 3) & 0x3)
+#define VIPER_BOARD_ISSUE(x) (((x) >> 0) & 0x7)
+
+/* Interrupt and Configuration Register (VIPER_ICR) */
+/* This is a write only register. Only CF_RST is used under Linux */
+
+#define VIPER_ICR_RETRIG (1 << 0)
+#define VIPER_ICR_AUTO_CLR (1 << 1)
+#define VIPER_ICR_R_DIS (1 << 2)
+#define VIPER_ICR_CF_RST (1 << 3)
+
+#endif
+
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
new file mode 100644
index 0000000..f65dfb6
--- /dev/null
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -0,0 +1,729 @@
+/*
+ * Hardware definitions for Voipac PXA270
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
+#include <linux/dm9000.h>
+#include <linux/ucb1400.h>
+#include <linux/ata_platform.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/max1586.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa27x.h"
+#include <mach/audio.h>
+#include <mach/vpac270.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include "pxa27x-udc.h"
+#include "udc.h"
+#include <linux/platform_data/ata-pxa.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long vpac270_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO53_GPIO, /* SD detect */
+ GPIO52_GPIO, /* SD r/o switch */
+
+ /* GPIO KEYS */
+ GPIO1_GPIO, /* USER BTN */
+
+ /* LEDs */
+ GPIO15_GPIO, /* orange led */
+
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO39_FFUART_TXD,
+ GPIO27_FFUART_RTS,
+ GPIO100_FFUART_CTS,
+ GPIO33_FFUART_DSR,
+ GPIO40_FFUART_DTR,
+ GPIO10_FFUART_DCD,
+ GPIO38_FFUART_RI,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO86_LCD_LDD_16,
+ GPIO87_LCD_LDD_17,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* PCMCIA */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO57_nIOIS16,
+ GPIO56_nPWAIT,
+ GPIO104_PSKTSEL,
+ GPIO84_GPIO, /* PCMCIA CD */
+ GPIO35_GPIO, /* PCMCIA RDY */
+ GPIO107_GPIO, /* PCMCIA PPEN */
+ GPIO11_GPIO, /* PCMCIA RESET */
+ GPIO17_GPIO, /* CF CD */
+ GPIO12_GPIO, /* CF RDY */
+ GPIO16_GPIO, /* CF RESET */
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ GPIO119_USBH2_PWR,
+ GPIO120_USBH2_PEN,
+
+ /* UDC */
+ GPIO41_GPIO,
+
+ /* Ethernet */
+ GPIO114_GPIO, /* IRQ */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO95_AC97_nRESET,
+ GPIO98_AC97_SYSCLK,
+ GPIO113_GPIO, /* TS IRQ */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* IDE */
+ GPIO36_GPIO, /* IDE IRQ */
+ GPIO80_DREQ_1,
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition vpac270_nor_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data vpac270_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = vpac270_nor_partitions,
+ .nr_parts = ARRAY_SIZE(vpac270_nor_partitions)
+ }
+};
+
+static struct resource vpac270_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device vpac270_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &vpac270_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = vpac270_flash_data,
+ },
+};
+static void __init vpac270_nor_init(void)
+{
+ platform_device_register(&vpac270_flash);
+}
+#else
+static inline void vpac270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * OneNAND Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
+static struct mtd_partition vpac270_onenand_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct onenand_platform_data vpac270_onenand_info = {
+ .parts = vpac270_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(vpac270_onenand_partitions),
+};
+
+static struct resource vpac270_onenand_resources[] = {
+ [0] = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_1M,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device vpac270_onenand = {
+ .name = "onenand-flash",
+ .id = -1,
+ .resource = vpac270_onenand_resources,
+ .num_resources = ARRAY_SIZE(vpac270_onenand_resources),
+ .dev = {
+ .platform_data = &vpac270_onenand_info,
+ },
+};
+
+static void __init vpac270_onenand_init(void)
+{
+ platform_device_register(&vpac270_onenand);
+}
+#else
+static void __init vpac270_onenand_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data vpac270_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
+ .gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N,
+ .gpio_card_ro = GPIO52_VPAC270_SD_READONLY,
+ .detect_delay_ms = 200,
+};
+
+static void __init vpac270_mmc_init(void)
+{
+ pxa_set_mci_info(&vpac270_mci_platform_data);
+}
+#else
+static inline void vpac270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button vpac270_pxa_buttons[] = {
+ {KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
+};
+
+static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
+ .buttons = vpac270_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(vpac270_pxa_buttons),
+};
+
+static struct platform_device vpac270_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_pxa_keys_data,
+ },
+};
+
+static void __init vpac270_keys_init(void)
+{
+ platform_device_register(&vpac270_pxa_keys);
+}
+#else
+static inline void vpac270_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led vpac270_gpio_leds[] = {
+{
+ .name = "vpac270:orange:user",
+ .default_trigger = "none",
+ .gpio = GPIO15_VPAC270_LED_ORANGE,
+ .active_low = 1,
+}
+};
+
+static struct gpio_led_platform_data vpac270_gpio_led_info = {
+ .leds = vpac270_gpio_leds,
+ .num_leds = ARRAY_SIZE(vpac270_gpio_leds),
+};
+
+static struct platform_device vpac270_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_gpio_led_info,
+ }
+};
+
+static void __init vpac270_leds_init(void)
+{
+ platform_device_register(&vpac270_leds);
+}
+#else
+static inline void vpac270_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int vpac270_ohci_init(struct device *dev)
+{
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+ return 0;
+}
+
+static struct pxaohci_platform_data vpac270_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 |
+ POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .init = vpac270_ohci_init,
+};
+
+static void __init vpac270_uhc_init(void)
+{
+ pxa_set_ohci_info(&vpac270_ohci_info);
+}
+#else
+static inline void vpac270_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
+static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
+ .gpio_vbus = GPIO41_VPAC270_UDC_DETECT,
+ .gpio_pullup = -1,
+};
+
+static struct platform_device vpac270_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_gpio_vbus_info,
+ },
+};
+
+static void vpac270_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR = UP2OCR_HXOE;
+}
+
+static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
+ .udc_command = vpac270_udc_command,
+ .gpio_pullup = -1,
+};
+
+static void __init vpac270_udc_init(void)
+{
+ pxa_set_udc_info(&vpac270_udc_info);
+ platform_device_register(&vpac270_gpio_vbus);
+}
+#else
+static inline void vpac270_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource vpac270_dm9000_resources[] = {
+ [0] = {
+ .start = PXA_CS2_PHYS + 0x300,
+ .end = PXA_CS2_PHYS + 0x303,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS2_PHYS + 0x304,
+ .end = PXA_CS2_PHYS + 0x343,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct dm9000_plat_data vpac270_dm9000_platdata = {
+ .flags = DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device vpac270_dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(vpac270_dm9000_resources),
+ .resource = vpac270_dm9000_resources,
+ .dev = {
+ .platform_data = &vpac270_dm9000_platdata,
+ }
+};
+
+static void __init vpac270_eth_init(void)
+{
+ platform_device_register(&vpac270_dm9000_device);
+}
+#else
+static inline void vpac270_eth_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+ .irq = PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ),
+};
+
+static struct platform_device vpac270_ucb1400_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_ucb1400_pdata,
+ },
+};
+
+static void __init vpac270_ts_init(void)
+{
+ pxa_set_ac97_info(&vpac270_ac97_pdata);
+ platform_device_register(&vpac270_ucb1400_device);
+}
+#else
+static inline void vpac270_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * RTC
+ ******************************************************************************/
+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
+static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
+ {
+ I2C_BOARD_INFO("ds1339", 0x68),
+ },
+};
+
+static void __init vpac270_rtc_init(void)
+{
+ i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
+}
+#else
+static inline void vpac270_rtc_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info vpac270_lcd_modes[] = {
+{
+ .pixclock = 57692,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 32,
+ .depth = 18,
+
+ .left_margin = 144,
+ .right_margin = 32,
+ .upper_margin = 13,
+ .lower_margin = 30,
+
+ .hsync_len = 32,
+ .vsync_len = 2,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, { /* CRT 640x480 */
+ .pixclock = 35000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .depth = 16,
+
+ .left_margin = 96,
+ .right_margin = 48,
+ .upper_margin = 33,
+ .lower_margin = 10,
+
+ .hsync_len = 48,
+ .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, { /* CRT 800x600 H=30kHz V=48HZ */
+ .pixclock = 25000,
+ .xres = 800,
+ .yres = 600,
+ .bpp = 16,
+ .depth = 16,
+
+ .left_margin = 50,
+ .right_margin = 1,
+ .upper_margin = 21,
+ .lower_margin = 12,
+
+ .hsync_len = 8,
+ .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, { /* CRT 1024x768 H=40kHz V=50Hz */
+ .pixclock = 15000,
+ .xres = 1024,
+ .yres = 768,
+ .bpp = 16,
+ .depth = 16,
+
+ .left_margin = 220,
+ .right_margin = 8,
+ .upper_margin = 33,
+ .lower_margin = 2,
+
+ .hsync_len = 48,
+ .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}
+};
+
+static struct pxafb_mach_info vpac270_lcd_screen = {
+ .modes = vpac270_lcd_modes,
+ .num_modes = ARRAY_SIZE(vpac270_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_18BPP,
+};
+
+static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+ gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
+}
+
+static void __init vpac270_lcd_init(void)
+{
+ int ret;
+
+ ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
+ if (ret) {
+ pr_err("Requesting BKL-ON GPIO failed!\n");
+ goto err;
+ }
+
+ ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
+ if (ret) {
+ pr_err("Setting BKL-ON GPIO direction failed!\n");
+ goto err2;
+ }
+
+ vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
+ pxa_set_fb_info(NULL, &vpac270_lcd_screen);
+ return;
+
+err2:
+ gpio_free(GPIO81_VPAC270_BKL_ON);
+err:
+ return;
+}
+#else
+static inline void vpac270_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * PATA IDE
+ ******************************************************************************/
+#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
+static struct pata_pxa_pdata vpac270_pata_pdata = {
+ .reg_shift = 1,
+ .dma_dreq = 1,
+ .irq_flags = IRQF_TRIGGER_RISING,
+};
+
+static struct resource vpac270_ide_resources[] = {
+ [0] = { /* I/O Base address */
+ .start = PXA_CS3_PHYS + 0x120,
+ .end = PXA_CS3_PHYS + 0x13f,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = { /* CTL Base address */
+ .start = PXA_CS3_PHYS + 0x15c,
+ .end = PXA_CS3_PHYS + 0x15f,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = { /* DMA Base address */
+ .start = PXA_CS3_PHYS + 0x20,
+ .end = PXA_CS3_PHYS + 0x2f,
+ .flags = IORESOURCE_DMA
+ },
+ [3] = { /* IDE IRQ pin */
+ .start = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device vpac270_ide_device = {
+ .name = "pata_pxa",
+ .num_resources = ARRAY_SIZE(vpac270_ide_resources),
+ .resource = vpac270_ide_resources,
+ .dev = {
+ .platform_data = &vpac270_pata_pdata,
+ .coherent_dma_mask = 0xffffffff,
+ }
+};
+
+static void __init vpac270_ide_init(void)
+{
+ platform_device_register(&vpac270_ide_device);
+}
+#else
+static inline void vpac270_ide_init(void) {}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+ defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data vpac270_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 900000,
+ .max_uV = 1705000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = vpac270_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(vpac270_max1587a_consumers),
+};
+
+static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &vpac270_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data vpac270_max1587a_info = {
+ .subdevs = vpac270_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
+ .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &vpac270_max1587a_info,
+ },
+};
+
+static void __init vpac270_pmic_init(void)
+{
+ i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
+}
+#else
+static inline void vpac270_pmic_init(void) {}
+#endif
+
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init vpac270_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+
+ vpac270_pmic_init();
+ vpac270_lcd_init();
+ vpac270_mmc_init();
+ vpac270_nor_init();
+ vpac270_onenand_init();
+ vpac270_leds_init();
+ vpac270_keys_init();
+ vpac270_uhc_init();
+ vpac270_udc_init();
+ vpac270_eth_init();
+ vpac270_ts_init();
+ vpac270_rtc_init();
+ vpac270_ide_init();
+
+ regulator_has_full_constraints();
+}
+
+MACHINE_START(VPAC270, "Voipac PXA270")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = vpac270_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
new file mode 100644
index 0000000..c368c98
--- /dev/null
+++ b/arch/arm/mach-pxa/xcep.c
@@ -0,0 +1,193 @@
+/* linux/arch/arm/mach-pxa/xcep.c
+ *
+ * Support for the Iskratel Electronics XCEP platform as used in
+ * the Libera instruments from Instrumentation Technologies.
+ *
+ * Author: Ales Bardorfer <ales@i-tech.si>
+ * Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
+ * Contributions by: Matej Kenda <matej.kenda@i-tech.si>
+ * Created: June 2006
+ * Copyright: (C) 2006-2009 Instrumentation Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include "pxa25x.h"
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#define XCEP_ETH_PHYS (PXA_CS3_PHYS + 0x00000300)
+#define XCEP_ETH_PHYS_END (PXA_CS3_PHYS + 0x000fffff)
+#define XCEP_ETH_ATTR (PXA_CS3_PHYS + 0x02000000)
+#define XCEP_ETH_ATTR_END (PXA_CS3_PHYS + 0x020fffff)
+#define XCEP_ETH_IRQ IRQ_GPIO0
+
+/* XCEP CPLD base */
+#define XCEP_CPLD_BASE 0xf0000000
+
+
+/* Flash partitions. */
+
+static struct mtd_partition xcep_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "Bootloader ENV",
+ .size = 0x00040000,
+ .offset = 0x00040000,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "Kernel",
+ .size = 0x00100000,
+ .offset = 0x00080000,
+ }, {
+ .name = "Rescue fs",
+ .size = 0x00280000,
+ .offset = 0x00180000,
+ }, {
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00400000
+ }
+};
+
+static struct physmap_flash_data xcep_flash_data[] = {
+ {
+ .width = 4, /* bankwidth in bytes */
+ .parts = xcep_partitions,
+ .nr_parts = ARRAY_SIZE(xcep_partitions)
+ }
+};
+
+static struct resource flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = xcep_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+
+
+/* SMC LAN91C111 network controller. */
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = XCEP_ETH_PHYS,
+ .end = XCEP_ETH_PHYS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = XCEP_ETH_IRQ,
+ .end = XCEP_ETH_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "smc91x-attrib",
+ .start = XCEP_ETH_ATTR,
+ .end = XCEP_ETH_ATTR_END,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct smc91x_platdata xcep_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+ SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &xcep_smc91x_info,
+ },
+};
+
+
+static struct platform_device *devices[] __initdata = {
+ &flash_device,
+ &smc91x_device,
+};
+
+
+/* We have to state that there are HWMON devices on the I2C bus on XCEP.
+ * Drivers for HWMON verify capabilities of the adapter when loading and
+ * refuse to attach if the adapter doesn't support HWMON class of devices. */
+static struct i2c_pxa_platform_data xcep_i2c_platform_data = {
+ .class = I2C_CLASS_HWMON
+};
+
+
+static mfp_cfg_t xcep_pin_config[] __initdata = {
+ GPIO79_nCS_3, /* SMC 91C111 chip select. */
+ GPIO80_nCS_4, /* CPLD chip select. */
+ /* SSP communication to MSP430 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+ GPIO27_SSP1_EXTCLK
+};
+
+static void __init xcep_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_hwuart_info(NULL);
+
+ /* See Intel XScale Developer's Guide for details */
+ /* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
+ __raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
+ /* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
+ __raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
+
+ platform_add_devices(ARRAY_AND_SIZE(devices));
+ pxa_set_i2c_info(&xcep_i2c_platform_data);
+}
+
+MACHINE_START(XCEP, "Iskratel XCEP")
+ .atag_offset = 0x100,
+ .init_machine = xcep_init,
+ .map_io = pxa25x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
+ .init_time = pxa_timer_init,
+ .restart = pxa_restart,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
new file mode 100644
index 0000000..6fffcfc
--- /dev/null
+++ b/arch/arm/mach-pxa/z2.c
@@ -0,0 +1,737 @@
+/*
+ * linux/arch/arm/mach-pxa/z2.c
+ *
+ * Support for the Zipit Z2 Handheld device.
+ *
+ * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on research and code by: Ken McGuire
+ * Based on mainstone.c as modified for the Zipit Z2.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/z2_battery.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/spi/libertas_spi.h>
+#include <linux/spi/lms283gf05.h>
+#include <linux/power_supply.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/platform_data/i2c-pxa.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa27x.h"
+#include "mfp-pxa27x.h"
+#include <mach/z2.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include "pm.h"
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long z2_pin_config[] = {
+
+ /* LCD - 16bpp Active TFT */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+ GPIO19_GPIO, /* LCD reset */
+ GPIO88_GPIO, /* LCD chipselect */
+
+ /* PWM */
+ GPIO115_PWM1_OUT, /* Keypad Backlight */
+ GPIO11_PWM2_OUT, /* LCD Backlight */
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO96_GPIO, /* SD detect */
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* Keypad */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO34_KP_MKIN_3,
+ GPIO38_KP_MKIN_4,
+ GPIO16_KP_MKIN_5,
+ GPIO17_KP_MKIN_6,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+ GPIO35_KP_MKOUT_6,
+ GPIO41_KP_MKOUT_7,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK, /* SSP1_SCK */
+ GPIO25_SSP1_TXD, /* SSP1_TXD */
+ GPIO26_SSP1_RXD, /* SSP1_RXD */
+
+ /* SSP2 */
+ GPIO22_SSP2_SCLK, /* SSP2_SCK */
+ GPIO13_SSP2_TXD, /* SSP2_TXD */
+ GPIO40_SSP2_RXD, /* SSP2_RXD */
+
+ /* LEDs */
+ GPIO10_GPIO, /* WiFi LED */
+ GPIO83_GPIO, /* Charging LED */
+ GPIO85_GPIO, /* Charged LED */
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+ GPIO113_I2S_SYSCLK,
+
+ /* MISC */
+ GPIO0_GPIO, /* AC power detect */
+ GPIO1_GPIO, /* Power button */
+ GPIO37_GPIO, /* Headphone detect */
+ GPIO98_GPIO, /* Lid switch */
+ GPIO14_GPIO, /* WiFi Power */
+ GPIO24_GPIO, /* WiFi CS */
+ GPIO36_GPIO, /* WiFi IRQ */
+ GPIO88_GPIO, /* LCD CS */
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct resource z2_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition z2_flash_parts[] = {
+ {
+ .name = "U-Boot Bootloader",
+ .offset = 0x0,
+ .size = 0x40000,
+ }, {
+ .name = "U-Boot Environment",
+ .offset = 0x40000,
+ .size = 0x20000,
+ }, {
+ .name = "Flash",
+ .offset = 0x60000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data z2_flash_data = {
+ .width = 2,
+ .parts = z2_flash_parts,
+ .nr_parts = ARRAY_SIZE(z2_flash_parts),
+};
+
+static struct platform_device z2_flash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &z2_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &z2_flash_data,
+ },
+};
+
+static void __init z2_nor_init(void)
+{
+ platform_device_register(&z2_flash);
+}
+#else
+static inline void z2_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup z2_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320,
+ PWM_POLARITY_NORMAL),
+ PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data z2_backlight_data[] = {
+ [0] = {
+ /* Keypad Backlight */
+ .max_brightness = 1023,
+ .dft_brightness = 0,
+ .enable_gpio = -1,
+ },
+ [1] = {
+ /* LCD Backlight */
+ .max_brightness = 1023,
+ .dft_brightness = 512,
+ .enable_gpio = -1,
+ },
+};
+
+static struct platform_device z2_backlight_devices[2] = {
+ {
+ .name = "pwm-backlight",
+ .id = 0,
+ .dev = {
+ .platform_data = &z2_backlight_data[1],
+ },
+ },
+ {
+ .name = "pwm-backlight",
+ .id = 1,
+ .dev = {
+ .platform_data = &z2_backlight_data[0],
+ },
+ },
+};
+static void __init z2_pwm_init(void)
+{
+ pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup));
+ platform_device_register(&z2_backlight_devices[0]);
+ platform_device_register(&z2_backlight_devices[1]);
+}
+#else
+static inline void z2_pwm_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info z2_lcd_modes[] = {
+{
+ .pixclock = 192000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 4,
+ .right_margin = 8,
+ .upper_margin = 4,
+ .lower_margin = 8,
+
+ .hsync_len = 4,
+ .vsync_len = 4,
+},
+};
+
+static struct pxafb_mach_info z2_lcd_screen = {
+ .modes = z2_lcd_modes,
+ .num_modes = ARRAY_SIZE(z2_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW |
+ LCD_ALTERNATE_MAPPING,
+};
+
+static void __init z2_lcd_init(void)
+{
+ pxa_set_fb_info(NULL, &z2_lcd_screen);
+}
+#else
+static inline void z2_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data z2_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO96_ZIPITZ2_SD_DETECT,
+ .gpio_power = -1,
+ .gpio_card_ro = -1,
+ .detect_delay_ms = 200,
+};
+
+static void __init z2_mmc_init(void)
+{
+ pxa_set_mci_info(&z2_mci_platform_data);
+}
+#else
+static inline void z2_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led z2_gpio_leds[] = {
+{
+ .name = "z2:green:wifi",
+ .default_trigger = "none",
+ .gpio = GPIO10_ZIPITZ2_LED_WIFI,
+ .active_low = 1,
+}, {
+ .name = "z2:green:charged",
+ .default_trigger = "mmc0",
+ .gpio = GPIO85_ZIPITZ2_LED_CHARGED,
+ .active_low = 1,
+}, {
+ .name = "z2:amber:charging",
+ .default_trigger = "Z2-charging-or-full",
+ .gpio = GPIO83_ZIPITZ2_LED_CHARGING,
+ .active_low = 1,
+},
+};
+
+static struct gpio_led_platform_data z2_gpio_led_info = {
+ .leds = z2_gpio_leds,
+ .num_leds = ARRAY_SIZE(z2_gpio_leds),
+};
+
+static struct platform_device z2_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &z2_gpio_led_info,
+ }
+};
+
+static void __init z2_leds_init(void)
+{
+ platform_device_register(&z2_leds);
+}
+#else
+static inline void z2_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int z2_matrix_keys[] = {
+ KEY(0, 0, KEY_OPTION),
+ KEY(1, 0, KEY_UP),
+ KEY(2, 0, KEY_DOWN),
+ KEY(3, 0, KEY_LEFT),
+ KEY(4, 0, KEY_RIGHT),
+ KEY(5, 0, KEY_END),
+ KEY(6, 0, KEY_KPPLUS),
+
+ KEY(0, 1, KEY_HOME),
+ KEY(1, 1, KEY_Q),
+ KEY(2, 1, KEY_I),
+ KEY(3, 1, KEY_G),
+ KEY(4, 1, KEY_X),
+ KEY(5, 1, KEY_ENTER),
+ KEY(6, 1, KEY_KPMINUS),
+
+ KEY(0, 2, KEY_PAGEUP),
+ KEY(1, 2, KEY_W),
+ KEY(2, 2, KEY_O),
+ KEY(3, 2, KEY_H),
+ KEY(4, 2, KEY_C),
+ KEY(5, 2, KEY_LEFTALT),
+
+ KEY(0, 3, KEY_PAGEDOWN),
+ KEY(1, 3, KEY_E),
+ KEY(2, 3, KEY_P),
+ KEY(3, 3, KEY_J),
+ KEY(4, 3, KEY_V),
+ KEY(5, 3, KEY_LEFTSHIFT),
+
+ KEY(0, 4, KEY_ESC),
+ KEY(1, 4, KEY_R),
+ KEY(2, 4, KEY_A),
+ KEY(3, 4, KEY_K),
+ KEY(4, 4, KEY_B),
+ KEY(5, 4, KEY_LEFTCTRL),
+
+ KEY(0, 5, KEY_TAB),
+ KEY(1, 5, KEY_T),
+ KEY(2, 5, KEY_S),
+ KEY(3, 5, KEY_L),
+ KEY(4, 5, KEY_N),
+ KEY(5, 5, KEY_SPACE),
+
+ KEY(0, 6, KEY_STOPCD),
+ KEY(1, 6, KEY_Y),
+ KEY(2, 6, KEY_D),
+ KEY(3, 6, KEY_BACKSPACE),
+ KEY(4, 6, KEY_M),
+ KEY(5, 6, KEY_COMMA),
+
+ KEY(0, 7, KEY_PLAYCD),
+ KEY(1, 7, KEY_U),
+ KEY(2, 7, KEY_F),
+ KEY(3, 7, KEY_Z),
+ KEY(4, 7, KEY_SEMICOLON),
+ KEY(5, 7, KEY_DOT),
+};
+
+static struct matrix_keymap_data z2_matrix_keymap_data = {
+ .keymap = z2_matrix_keys,
+ .keymap_size = ARRAY_SIZE(z2_matrix_keys),
+};
+
+static struct pxa27x_keypad_platform_data z2_keypad_platform_data = {
+ .matrix_key_rows = 7,
+ .matrix_key_cols = 8,
+ .matrix_keymap_data = &z2_matrix_keymap_data,
+
+ .debounce_interval = 30,
+};
+
+static void __init z2_mkp_init(void)
+{
+ pxa_set_keypad_info(&z2_keypad_platform_data);
+}
+#else
+static inline void z2_mkp_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button z2_pxa_buttons[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = GPIO1_ZIPITZ2_POWER_BUTTON,
+ .active_low = 0,
+ .desc = "Power Button",
+ .wakeup = 1,
+ .type = EV_KEY,
+ },
+ {
+ .code = SW_LID,
+ .gpio = GPIO98_ZIPITZ2_LID_BUTTON,
+ .active_low = 1,
+ .desc = "Lid Switch",
+ .wakeup = 0,
+ .type = EV_SW,
+ },
+};
+
+static struct gpio_keys_platform_data z2_pxa_keys_data = {
+ .buttons = z2_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(z2_pxa_buttons),
+};
+
+static struct platform_device z2_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &z2_pxa_keys_data,
+ },
+};
+
+static void __init z2_keys_init(void)
+{
+ platform_device_register(&z2_pxa_keys);
+}
+#else
+static inline void z2_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * Battery
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct z2_battery_info batt_chip_info = {
+ .batt_I2C_bus = 0,
+ .batt_I2C_addr = 0x55,
+ .batt_I2C_reg = 2,
+ .charge_gpio = GPIO0_ZIPITZ2_AC_DETECT,
+ .min_voltage = 3475000,
+ .max_voltage = 4190000,
+ .batt_div = 59,
+ .batt_mult = 1000000,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
+ .batt_name = "Z2",
+};
+
+static struct i2c_board_info __initdata z2_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("aer915", 0x55),
+ .platform_data = &batt_chip_info,
+ }, {
+ I2C_BOARD_INFO("wm8750", 0x1b),
+ },
+
+};
+
+static void __init z2_i2c_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
+}
+#else
+static inline void z2_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * SSP Devices - WiFi and LCD control
+ ******************************************************************************/
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+/* WiFi */
+static int z2_lbs_spi_setup(struct spi_device *spi)
+{
+ int ret = 0;
+
+ ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power");
+ if (ret)
+ goto err;
+
+ ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1);
+ if (ret)
+ goto err2;
+
+ /* Wait until card is powered on */
+ mdelay(180);
+
+ spi->bits_per_word = 16;
+ spi->mode = SPI_MODE_2,
+
+ spi_setup(spi);
+
+ return 0;
+
+err2:
+ gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
+err:
+ return ret;
+};
+
+static int z2_lbs_spi_teardown(struct spi_device *spi)
+{
+ gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0);
+ gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
+
+ return 0;
+};
+
+static struct pxa2xx_spi_chip z2_lbs_chip_info = {
+ .rx_threshold = 8,
+ .tx_threshold = 8,
+ .timeout = 1000,
+ .gpio_cs = GPIO24_ZIPITZ2_WIFI_CS,
+};
+
+static struct libertas_spi_platform_data z2_lbs_pdata = {
+ .use_dummy_writes = 1,
+ .setup = z2_lbs_spi_setup,
+ .teardown = z2_lbs_spi_teardown,
+};
+
+/* LCD */
+static struct pxa2xx_spi_chip lms283_chip_info = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .timeout = 64,
+ .gpio_cs = GPIO88_ZIPITZ2_LCD_CS,
+};
+
+static const struct lms283gf05_pdata lms283_pdata = {
+ .reset_gpio = GPIO19_ZIPITZ2_LCD_RESET,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+{
+ .modalias = "libertas_spi",
+ .platform_data = &z2_lbs_pdata,
+ .controller_data = &z2_lbs_chip_info,
+ .irq = PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ),
+ .max_speed_hz = 13000000,
+ .bus_num = 1,
+ .chip_select = 0,
+},
+{
+ .modalias = "lms283gf05",
+ .controller_data = &lms283_chip_info,
+ .platform_data = &lms283_pdata,
+ .max_speed_hz = 400000,
+ .bus_num = 2,
+ .chip_select = 0,
+},
+};
+
+static struct pxa2xx_spi_master pxa_ssp1_master_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+ .num_chipselect = 1,
+};
+
+static void __init z2_spi_init(void)
+{
+ pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
+ pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+}
+#else
+static inline void z2_spi_init(void) {}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_TPS65023) || \
+ defined(CONFIG_REGULATOR_TPS65023_MODULE)
+static struct regulator_consumer_supply z2_tps65021_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data z2_tps65021_info[] = {
+ {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 800000,
+ .max_uV = 1600000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = z2_tps65021_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(z2_tps65021_consumers),
+ }, {
+ .constraints = {
+ .name = "DCDC2",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ },
+ }, {
+ .constraints = {
+ .name = "DCDC3",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .always_on = 1,
+ },
+ }, {
+ .constraints = {
+ .name = "LDO1",
+ .min_uV = 1000000,
+ .max_uV = 3150000,
+ .always_on = 1,
+ },
+ }, {
+ .constraints = {
+ .name = "LDO2",
+ .min_uV = 1050000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ },
+ }
+};
+
+static struct i2c_board_info __initdata z2_pi2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("tps65021", 0x48),
+ .platform_data = &z2_tps65021_info,
+ },
+};
+
+static void __init z2_pmic_init(void)
+{
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info));
+}
+#else
+static inline void z2_pmic_init(void) {}
+#endif
+
+#ifdef CONFIG_PM
+static void z2_power_off(void)
+{
+ /* We're using deep sleep as poweroff, so clear PSPR to ensure that
+ * bootloader will jump to its entry point in resume handler
+ */
+ PSPR = 0x0;
+ local_irq_disable();
+ pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+ pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
+}
+#else
+#define z2_power_off NULL
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init z2_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ z2_lcd_init();
+ z2_mmc_init();
+ z2_mkp_init();
+ z2_i2c_init();
+ z2_spi_init();
+ z2_nor_init();
+ z2_pwm_init();
+ z2_leds_init();
+ z2_keys_init();
+ z2_pmic_init();
+
+ pm_power_off = z2_power_off;
+}
+
+MACHINE_START(ZIPIT2, "Zipit Z2")
+ .atag_offset = 0x100,
+ .map_io = pxa27x_map_io,
+ .nr_irqs = PXA_NR_IRQS,
+ .init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = z2_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
new file mode 100644
index 0000000..e385179
--- /dev/null
+++ b/arch/arm/mach-pxa/zeus.c
@@ -0,0 +1,933 @@
+/*
+ * Support for the Arcom ZEUS.
+ *
+ * Copyright (C) 2006 Arcom Control Systems Ltd.
+ *
+ * Loosely based on Arcom's 2.6.16.28.
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/dm9000.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/apm-emulation.h>
+#include <linux/can/platform/mcp251x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/suspend.h>
+#include <asm/system_info.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "pxa27x.h"
+#include "devices.h"
+#include <mach/regs-uart.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include "pxa27x-udc.h"
+#include "udc.h"
+#include <linux/platform_data/video-pxafb.h>
+#include "pm.h"
+#include <mach/audio.h>
+#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
+#include "zeus.h"
+#include <mach/smemc.h>
+
+#include "generic.h"
+
+/*
+ * Interrupt handling
+ */
+
+static unsigned long zeus_irq_enabled_mask;
+static const int zeus_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, };
+static const int zeus_isa_irq_map[] = {
+ 0, /* ISA irq #0, invalid */
+ 0, /* ISA irq #1, invalid */
+ 0, /* ISA irq #2, invalid */
+ 1 << 0, /* ISA irq #3 */
+ 1 << 1, /* ISA irq #4 */
+ 1 << 2, /* ISA irq #5 */
+ 1 << 3, /* ISA irq #6 */
+ 1 << 4, /* ISA irq #7 */
+ 0, /* ISA irq #8, invalid */
+ 0, /* ISA irq #9, invalid */
+ 1 << 5, /* ISA irq #10 */
+ 1 << 6, /* ISA irq #11 */
+ 1 << 7, /* ISA irq #12 */
+};
+
+static inline int zeus_irq_to_bitmask(unsigned int irq)
+{
+ return zeus_isa_irq_map[irq - PXA_ISA_IRQ(0)];
+}
+
+static inline int zeus_bit_to_irq(int bit)
+{
+ return zeus_isa_irqs[bit] + PXA_ISA_IRQ(0);
+}
+
+static void zeus_ack_irq(struct irq_data *d)
+{
+ __raw_writew(zeus_irq_to_bitmask(d->irq), ZEUS_CPLD_ISA_IRQ);
+}
+
+static void zeus_mask_irq(struct irq_data *d)
+{
+ zeus_irq_enabled_mask &= ~(zeus_irq_to_bitmask(d->irq));
+}
+
+static void zeus_unmask_irq(struct irq_data *d)
+{
+ zeus_irq_enabled_mask |= zeus_irq_to_bitmask(d->irq);
+}
+
+static inline unsigned long zeus_irq_pending(void)
+{
+ return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask;
+}
+
+static void zeus_irq_handler(struct irq_desc *desc)
+{
+ unsigned int irq;
+ unsigned long pending;
+
+ pending = zeus_irq_pending();
+ do {
+ /* we're in a chained irq handler,
+ * so ack the interrupt by hand */
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+
+ if (likely(pending)) {
+ irq = zeus_bit_to_irq(__ffs(pending));
+ generic_handle_irq(irq);
+ }
+ pending = zeus_irq_pending();
+ } while (pending);
+}
+
+static struct irq_chip zeus_irq_chip = {
+ .name = "ISA",
+ .irq_ack = zeus_ack_irq,
+ .irq_mask = zeus_mask_irq,
+ .irq_unmask = zeus_unmask_irq,
+};
+
+static void __init zeus_init_irq(void)
+{
+ int level;
+ int isa_irq;
+
+ pxa27x_init_irq();
+
+ /* Peripheral IRQs. It would be nice to move those inside driver
+ configuration, but it is not supported at the moment. */
+ irq_set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO),
+ IRQ_TYPE_EDGE_FALLING);
+ irq_set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING);
+
+ /* Setup ISA IRQs */
+ for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) {
+ isa_irq = zeus_bit_to_irq(level);
+ irq_set_chip_and_handler(isa_irq, &zeus_irq_chip,
+ handle_edge_irq);
+ irq_clear_status_flags(isa_irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+ }
+
+ irq_set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
+ irq_set_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler);
+}
+
+
+/*
+ * Platform devices
+ */
+
+/* Flash */
+static struct resource zeus_mtd_resources[] = {
+ [0] = { /* NOR Flash (up to 64MB) */
+ .start = ZEUS_FLASH_PHYS,
+ .end = ZEUS_FLASH_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* SRAM */
+ .start = ZEUS_SRAM_PHYS,
+ .end = ZEUS_SRAM_PHYS + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct physmap_flash_data zeus_flash_data[] = {
+ [0] = {
+ .width = 2,
+ .parts = NULL,
+ .nr_parts = 0,
+ },
+};
+
+static struct platform_device zeus_mtd_devices[] = {
+ [0] = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &zeus_flash_data[0],
+ },
+ .resource = &zeus_mtd_resources[0],
+ .num_resources = 1,
+ },
+};
+
+/* Serial */
+static struct resource zeus_serial_resources[] = {
+ {
+ .start = 0x10000000,
+ .end = 0x1000000f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x10800000,
+ .end = 0x1080000f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x11000000,
+ .end = 0x1100000f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40100000,
+ .end = 0x4010001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40200000,
+ .end = 0x4020001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40700000,
+ .end = 0x4070001f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ /* External UARTs */
+ /* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
+ { /* COM1 */
+ .mapbase = 0x10000000,
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .uartclk = 14745600,
+ .regshift = 1,
+ .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { /* COM2 */
+ .mapbase = 0x10800000,
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .uartclk = 14745600,
+ .regshift = 1,
+ .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { /* COM3 */
+ .mapbase = 0x11000000,
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .uartclk = 14745600,
+ .regshift = 1,
+ .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { /* COM4 */
+ .mapbase = 0x11800000,
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .uartclk = 14745600,
+ .regshift = 1,
+ .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ /* Internal UARTs */
+ { /* FFUART */
+ .membase = (void *)&FFUART,
+ .mapbase = __PREG(FFUART),
+ .irq = IRQ_FFUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { /* BTUART */
+ .membase = (void *)&BTUART,
+ .mapbase = __PREG(BTUART),
+ .irq = IRQ_BTUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { /* STUART */
+ .membase = (void *)&STUART,
+ .mapbase = __PREG(STUART),
+ .irq = IRQ_STUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { },
+};
+
+static struct platform_device zeus_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(zeus_serial_resources),
+ .resource = zeus_serial_resources,
+};
+
+/* Ethernet */
+static struct resource zeus_dm9k0_resource[] = {
+ [0] = {
+ .start = ZEUS_ETH0_PHYS,
+ .end = ZEUS_ETH0_PHYS + 1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = ZEUS_ETH0_PHYS + 2,
+ .end = ZEUS_ETH0_PHYS + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
+ .end = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct resource zeus_dm9k1_resource[] = {
+ [0] = {
+ .start = ZEUS_ETH1_PHYS,
+ .end = ZEUS_ETH1_PHYS + 1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = ZEUS_ETH1_PHYS + 2,
+ .end = ZEUS_ETH1_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
+ .end = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct dm9000_plat_data zeus_dm9k_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device zeus_dm9k0_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(zeus_dm9k0_resource),
+ .resource = zeus_dm9k0_resource,
+ .dev = {
+ .platform_data = &zeus_dm9k_platdata,
+ }
+};
+
+static struct platform_device zeus_dm9k1_device = {
+ .name = "dm9000",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(zeus_dm9k1_resource),
+ .resource = zeus_dm9k1_resource,
+ .dev = {
+ .platform_data = &zeus_dm9k_platdata,
+ }
+};
+
+/* External SRAM */
+static struct resource zeus_sram_resource = {
+ .start = ZEUS_SRAM_PHYS,
+ .end = ZEUS_SRAM_PHYS + ZEUS_SRAM_SIZE * 2 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device zeus_sram_device = {
+ .name = "pxa2xx-8bit-sram",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &zeus_sram_resource,
+};
+
+/* SPI interface on SSP3 */
+static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+/* CAN bus on SPI */
+static struct regulator_consumer_supply can_regulator_consumer =
+ REGULATOR_SUPPLY("vdd", "spi3.0");
+
+static struct regulator_init_data can_regulator_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = &can_regulator_consumer,
+ .num_consumer_supplies = 1,
+};
+
+static struct fixed_voltage_config can_regulator_pdata = {
+ .supply_name = "CAN_SHDN",
+ .microvolts = 3300000,
+ .gpio = ZEUS_CAN_SHDN_GPIO,
+ .init_data = &can_regulator_init_data,
+};
+
+static struct platform_device can_regulator_device = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &can_regulator_pdata,
+ },
+};
+
+static struct mcp251x_platform_data zeus_mcp2515_pdata = {
+ .oscillator_frequency = 16*1000*1000,
+};
+
+static struct spi_board_info zeus_spi_board_info[] = {
+ [0] = {
+ .modalias = "mcp2515",
+ .platform_data = &zeus_mcp2515_pdata,
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
+ .max_speed_hz = 1*1000*1000,
+ .bus_num = 3,
+ .mode = SPI_MODE_0,
+ .chip_select = 0,
+ },
+};
+
+/* Leds */
+static struct gpio_led zeus_leds[] = {
+ [0] = {
+ .name = "zeus:yellow:1",
+ .default_trigger = "heartbeat",
+ .gpio = ZEUS_EXT0_GPIO(3),
+ .active_low = 1,
+ },
+ [1] = {
+ .name = "zeus:yellow:2",
+ .default_trigger = "default-on",
+ .gpio = ZEUS_EXT0_GPIO(4),
+ .active_low = 1,
+ },
+ [2] = {
+ .name = "zeus:yellow:3",
+ .default_trigger = "default-on",
+ .gpio = ZEUS_EXT0_GPIO(5),
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data zeus_leds_info = {
+ .leds = zeus_leds,
+ .num_leds = ARRAY_SIZE(zeus_leds),
+};
+
+static struct platform_device zeus_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &zeus_leds_info,
+ },
+};
+
+static void zeus_cf_reset(int state)
+{
+ u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL);
+
+ if (state)
+ cpld_state |= ZEUS_CPLD_CONTROL_CF_RST;
+ else
+ cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST;
+
+ __raw_writew(cpld_state, ZEUS_CPLD_CONTROL);
+}
+
+static struct arcom_pcmcia_pdata zeus_pcmcia_info = {
+ .cd_gpio = ZEUS_CF_CD_GPIO,
+ .rdy_gpio = ZEUS_CF_RDY_GPIO,
+ .pwr_gpio = ZEUS_CF_PWEN_GPIO,
+ .reset = zeus_cf_reset,
+};
+
+static struct platform_device zeus_pcmcia_device = {
+ .name = "zeus-pcmcia",
+ .id = -1,
+ .dev = {
+ .platform_data = &zeus_pcmcia_info,
+ },
+};
+
+static struct resource zeus_max6369_resource = {
+ .start = ZEUS_CPLD_EXTWDOG_PHYS,
+ .end = ZEUS_CPLD_EXTWDOG_PHYS,
+ .flags = IORESOURCE_MEM,
+};
+
+struct platform_device zeus_max6369_device = {
+ .name = "max6369_wdt",
+ .id = -1,
+ .resource = &zeus_max6369_resource,
+ .num_resources = 1,
+};
+
+/* AC'97 */
+static pxa2xx_audio_ops_t zeus_ac97_info = {
+ .reset_gpio = 95,
+};
+
+
+/*
+ * USB host
+ */
+
+static struct regulator_consumer_supply zeus_ohci_regulator_supplies[] = {
+ REGULATOR_SUPPLY("vbus2", "pxa27x-ohci"),
+};
+
+static struct regulator_init_data zeus_ohci_regulator_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(zeus_ohci_regulator_supplies),
+ .consumer_supplies = zeus_ohci_regulator_supplies,
+};
+
+static struct fixed_voltage_config zeus_ohci_regulator_config = {
+ .supply_name = "vbus2",
+ .microvolts = 5000000, /* 5.0V */
+ .gpio = ZEUS_USB2_PWREN_GPIO,
+ .enable_high = 1,
+ .startup_delay = 0,
+ .init_data = &zeus_ohci_regulator_data,
+};
+
+static struct platform_device zeus_ohci_regulator_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &zeus_ohci_regulator_config,
+ },
+};
+
+static struct pxaohci_platform_data zeus_ohci_platform_data = {
+ .port_mode = PMM_NPS_MODE,
+ /* Clear Power Control Polarity Low and set Power Sense
+ * Polarity Low. Supply power to USB ports. */
+ .flags = ENABLE_PORT_ALL | POWER_SENSE_LOW,
+};
+
+static void zeus_register_ohci(void)
+{
+ /* Port 2 is shared between host and client interface. */
+ UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+ pxa_set_ohci_info(&zeus_ohci_platform_data);
+}
+
+/*
+ * Flat Panel
+ */
+
+static void zeus_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+ gpio_set_value(ZEUS_LCD_EN_GPIO, on);
+}
+
+static void zeus_backlight_power(int on)
+{
+ gpio_set_value(ZEUS_BKLEN_GPIO, on);
+}
+
+static int zeus_setup_fb_gpios(void)
+{
+ int err;
+
+ if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN")))
+ goto out_err;
+
+ if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0)))
+ goto out_err_lcd;
+
+ if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN")))
+ goto out_err_lcd;
+
+ if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0)))
+ goto out_err_bkl;
+
+ return 0;
+
+out_err_bkl:
+ gpio_free(ZEUS_BKLEN_GPIO);
+out_err_lcd:
+ gpio_free(ZEUS_LCD_EN_GPIO);
+out_err:
+ return err;
+}
+
+static struct pxafb_mode_info zeus_fb_mode_info[] = {
+ {
+ .pixclock = 39722,
+
+ .xres = 640,
+ .yres = 480,
+
+ .bpp = 16,
+
+ .hsync_len = 63,
+ .left_margin = 16,
+ .right_margin = 81,
+
+ .vsync_len = 2,
+ .upper_margin = 12,
+ .lower_margin = 31,
+
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info zeus_fb_info = {
+ .modes = zeus_fb_mode_info,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_lcd_power = zeus_lcd_power,
+ .pxafb_backlight_power = zeus_backlight_power,
+};
+
+/*
+ * MMC/SD Device
+ *
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+
+static struct pxamci_platform_data zeus_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .detect_delay_ms = 250,
+ .gpio_card_detect = ZEUS_MMC_CD_GPIO,
+ .gpio_card_ro = ZEUS_MMC_WP_GPIO,
+ .gpio_card_ro_invert = 1,
+ .gpio_power = -1
+};
+
+/*
+ * USB Device Controller
+ */
+static void zeus_udc_command(int cmd)
+{
+ switch (cmd) {
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ pr_info("zeus: disconnecting USB client\n");
+ UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+ break;
+
+ case PXA2XX_UDC_CMD_CONNECT:
+ pr_info("zeus: connecting USB client\n");
+ UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+ break;
+ }
+}
+
+static struct pxa2xx_udc_mach_info zeus_udc_info = {
+ .udc_command = zeus_udc_command,
+};
+
+static struct platform_device *zeus_devices[] __initdata = {
+ &zeus_serial_device,
+ &zeus_mtd_devices[0],
+ &zeus_dm9k0_device,
+ &zeus_dm9k1_device,
+ &zeus_sram_device,
+ &zeus_leds_device,
+ &zeus_pcmcia_device,
+ &zeus_max6369_device,
+ &can_regulator_device,
+ &zeus_ohci_regulator_device,
+};
+
+#ifdef CONFIG_PM
+static void zeus_power_off(void)
+{
+ local_irq_disable();
+ cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
+}
+#else
+#define zeus_power_off NULL
+#endif
+
+#ifdef CONFIG_APM_EMULATION
+static void zeus_get_power_status(struct apm_power_info *info)
+{
+ /* Power supply is always present */
+ info->ac_line_status = APM_AC_ONLINE;
+ info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
+ info->battery_flag = APM_BATTERY_FLAG_NOT_PRESENT;
+}
+
+static inline void zeus_setup_apm(void)
+{
+ apm_get_power_status = zeus_get_power_status;
+}
+#else
+static inline void zeus_setup_apm(void)
+{
+}
+#endif
+
+static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
+ unsigned ngpio, void *context)
+{
+ int i;
+ u8 pcb_info = 0;
+
+ for (i = 0; i < 8; i++) {
+ int pcb_bit = gpio + i + 8;
+
+ if (gpio_request(pcb_bit, "pcb info")) {
+ dev_err(&client->dev, "Can't request pcb info %d\n", i);
+ continue;
+ }
+
+ if (gpio_direction_input(pcb_bit)) {
+ dev_err(&client->dev, "Can't read pcb info %d\n", i);
+ gpio_free(pcb_bit);
+ continue;
+ }
+
+ pcb_info |= !!gpio_get_value(pcb_bit) << i;
+
+ gpio_free(pcb_bit);
+ }
+
+ dev_info(&client->dev, "Zeus PCB version %d issue %d\n",
+ pcb_info >> 4, pcb_info & 0xf);
+
+ return 0;
+}
+
+static struct pca953x_platform_data zeus_pca953x_pdata[] = {
+ [0] = { .gpio_base = ZEUS_EXT0_GPIO_BASE, },
+ [1] = {
+ .gpio_base = ZEUS_EXT1_GPIO_BASE,
+ .setup = zeus_get_pcb_info,
+ },
+ [2] = { .gpio_base = ZEUS_USER_GPIO_BASE, },
+};
+
+static struct i2c_board_info __initdata zeus_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pca9535", 0x21),
+ .platform_data = &zeus_pca953x_pdata[0],
+ },
+ {
+ I2C_BOARD_INFO("pca9535", 0x22),
+ .platform_data = &zeus_pca953x_pdata[1],
+ },
+ {
+ I2C_BOARD_INFO("pca9535", 0x20),
+ .platform_data = &zeus_pca953x_pdata[2],
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO),
+ },
+ { I2C_BOARD_INFO("lm75a", 0x48) },
+ { I2C_BOARD_INFO("24c01", 0x50) },
+ { I2C_BOARD_INFO("isl1208", 0x6f) },
+};
+
+static mfp_cfg_t zeus_pin_config[] __initdata = {
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+
+ GPIO22_GPIO,
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ GPIO119_USBH2_PWR,
+ GPIO120_USBH2_PEN,
+
+ GPIO86_LCD_LDD_16,
+ GPIO87_LCD_LDD_17,
+
+ GPIO102_GPIO,
+ GPIO104_CIF_DD_2,
+ GPIO105_CIF_DD_1,
+
+ GPIO81_SSP3_TXD,
+ GPIO82_SSP3_RXD,
+ GPIO83_SSP3_SFRM,
+ GPIO84_SSP3_SCLK,
+
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO36_GPIO, /* CF CD */
+ GPIO97_GPIO, /* CF PWREN */
+ GPIO99_GPIO, /* CF RDY */
+};
+
+/*
+ * DM9k MSCx settings: SRAM, 16 bits
+ * 17 cycles delay first access
+ * 5 cycles delay next access
+ * 13 cycles recovery time
+ * faster device
+ */
+#define DM9K_MSC_VALUE 0xe4c9
+
+static void __init zeus_init(void)
+{
+ u16 dm9000_msc = DM9K_MSC_VALUE;
+ u32 msc0, msc1;
+
+ system_rev = __raw_readw(ZEUS_CPLD_VERSION);
+ pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
+
+ /* Fix timings for dm9000s (CS1/CS2)*/
+ msc0 = (__raw_readl(MSC0) & 0x0000ffff) | (dm9000_msc << 16);
+ msc1 = (__raw_readl(MSC1) & 0xffff0000) | dm9000_msc;
+ __raw_writel(msc0, MSC0);
+ __raw_writel(msc1, MSC1);
+
+ pm_power_off = zeus_power_off;
+ zeus_setup_apm();
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
+
+ platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
+
+ zeus_register_ohci();
+
+ if (zeus_setup_fb_gpios())
+ pr_err("Failed to setup fb gpios\n");
+ else
+ pxa_set_fb_info(NULL, &zeus_fb_info);
+
+ pxa_set_mci_info(&zeus_mci_platform_data);
+ pxa_set_udc_info(&zeus_udc_info);
+ pxa_set_ac97_info(&zeus_ac97_info);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
+ pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
+ spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
+
+ regulator_has_full_constraints();
+}
+
+static struct map_desc zeus_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long)ZEUS_CPLD_VERSION,
+ .pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
+ .length = 0x1000,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ,
+ .pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
+ .length = 0x1000,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)ZEUS_CPLD_CONTROL,
+ .pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
+ .length = 0x1000,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)ZEUS_PC104IO,
+ .pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS),
+ .length = 0x00800000,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init zeus_map_io(void)
+{
+ pxa27x_map_io();
+
+ iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
+
+ /* Clear PSPR to ensure a full restart on wake-up. */
+ PMCR = PSPR = 0;
+
+ /* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
+ writel(readl(OSCC) | OSCC_OON, OSCC);
+
+ /* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
+ * float chip selects and PCMCIA */
+ PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
+}
+
+MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
+ /* Maintainer: Marc Zyngier <maz@misterjones.org> */
+ .atag_offset = 0x100,
+ .map_io = zeus_map_io,
+ .nr_irqs = ZEUS_NR_IRQS,
+ .init_irq = zeus_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = zeus_init,
+ .restart = pxa_restart,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/zeus.h b/arch/arm/mach-pxa/zeus.h
new file mode 100644
index 0000000..56024f8
--- /dev/null
+++ b/arch/arm/mach-pxa/zeus.h
@@ -0,0 +1,85 @@
+/*
+ * arch/arm/mach-pxa/include/mach/zeus.h
+ *
+ * Author: David Vrabel
+ * Created: Sept 28, 2005
+ * Copyright: Arcom Control Systems Ltd.
+ *
+ * Maintained by: Marc Zyngier <maz@misterjones.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _MACH_ZEUS_H
+#define _MACH_ZEUS_H
+
+#define ZEUS_NR_IRQS (IRQ_BOARD_START + 48)
+
+/* Physical addresses */
+#define ZEUS_FLASH_PHYS PXA_CS0_PHYS
+#define ZEUS_ETH0_PHYS PXA_CS1_PHYS
+#define ZEUS_ETH1_PHYS PXA_CS2_PHYS
+#define ZEUS_CPLD_PHYS (PXA_CS4_PHYS+0x2000000)
+#define ZEUS_SRAM_PHYS PXA_CS5_PHYS
+#define ZEUS_PC104IO_PHYS (0x30000000)
+
+#define ZEUS_CPLD_VERSION_PHYS (ZEUS_CPLD_PHYS + 0x00000000)
+#define ZEUS_CPLD_ISA_IRQ_PHYS (ZEUS_CPLD_PHYS + 0x00800000)
+#define ZEUS_CPLD_CONTROL_PHYS (ZEUS_CPLD_PHYS + 0x01000000)
+#define ZEUS_CPLD_EXTWDOG_PHYS (ZEUS_CPLD_PHYS + 0x01800000)
+
+/* GPIOs */
+#define ZEUS_AC97_GPIO 0
+#define ZEUS_WAKEUP_GPIO 1
+#define ZEUS_UARTA_GPIO 9
+#define ZEUS_UARTB_GPIO 10
+#define ZEUS_UARTC_GPIO 12
+#define ZEUS_UARTD_GPIO 11
+#define ZEUS_ETH0_GPIO 14
+#define ZEUS_ISA_GPIO 17
+#define ZEUS_BKLEN_GPIO 19
+#define ZEUS_USB2_PWREN_GPIO 22
+#define ZEUS_PTT_GPIO 27
+#define ZEUS_CF_CD_GPIO 35
+#define ZEUS_MMC_WP_GPIO 52
+#define ZEUS_MMC_CD_GPIO 53
+#define ZEUS_EXTGPIO_GPIO 91
+#define ZEUS_CF_PWEN_GPIO 97
+#define ZEUS_CF_RDY_GPIO 99
+#define ZEUS_LCD_EN_GPIO 101
+#define ZEUS_ETH1_GPIO 113
+#define ZEUS_CAN_GPIO 116
+
+#define ZEUS_EXT0_GPIO_BASE 128
+#define ZEUS_EXT1_GPIO_BASE 160
+#define ZEUS_USER_GPIO_BASE 192
+
+#define ZEUS_EXT0_GPIO(x) (ZEUS_EXT0_GPIO_BASE + (x))
+#define ZEUS_EXT1_GPIO(x) (ZEUS_EXT1_GPIO_BASE + (x))
+#define ZEUS_USER_GPIO(x) (ZEUS_USER_GPIO_BASE + (x))
+
+#define ZEUS_CAN_SHDN_GPIO ZEUS_EXT1_GPIO(2)
+
+/*
+ * CPLD registers:
+ * Only 4 registers, but spread over a 32MB address space.
+ * Be gentle, and remap that over 32kB...
+ */
+
+#define ZEUS_CPLD IOMEM(0xf0000000)
+#define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000)
+#define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000)
+#define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000)
+
+/* CPLD register bits */
+#define ZEUS_CPLD_CONTROL_CF_RST 0x01
+
+#define ZEUS_PC104IO IOMEM(0xf1000000)
+
+#define ZEUS_SRAM_SIZE (256 * 1024)
+
+#endif
+
+
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
new file mode 100644
index 0000000..52e70a5
--- /dev/null
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -0,0 +1,432 @@
+/*
+ * linux/arch/arm/mach-pxa/zylonite.c
+ *
+ * Support for the PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ *
+ * 2007-09-04: eric miao <eric.miao@marvell.com>
+ * rewrite to align with latest kernel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "pxa3xx.h"
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include "zylonite.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+
+#include "devices.h"
+#include "generic.h"
+
+int gpio_eth_irq;
+int gpio_debug_led1;
+int gpio_debug_led2;
+
+int wm9713_irq;
+
+int lcd_id;
+int lcd_orientation;
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = ZYLONITE_ETH_PHYS + 0x300,
+ .end = ZYLONITE_ETH_PHYS + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = -1, /* for run-time assignment */
+ .end = -1,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata zylonite_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+ SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &zylonite_smc91x_info,
+ },
+};
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led zylonite_debug_leds[] = {
+ [0] = {
+ .name = "zylonite:yellow:1",
+ .default_trigger = "heartbeat",
+ },
+ [1] = {
+ .name = "zylonite:yellow:2",
+ .default_trigger = "default-on",
+ },
+};
+
+static struct gpio_led_platform_data zylonite_debug_leds_info = {
+ .leds = zylonite_debug_leds,
+ .num_leds = ARRAY_SIZE(zylonite_debug_leds),
+};
+
+static struct platform_device zylonite_device_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &zylonite_debug_leds_info,
+ }
+};
+
+static void __init zylonite_init_leds(void)
+{
+ zylonite_debug_leds[0].gpio = gpio_debug_led1;
+ zylonite_debug_leds[1].gpio = gpio_debug_led2;
+
+ platform_device_register(&zylonite_device_leds);
+}
+#else
+static inline void zylonite_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup zylonite_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
+ PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data zylonite_backlight_data = {
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .enable_gpio = -1,
+};
+
+static struct platform_device zylonite_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm1.dev,
+ .platform_data = &zylonite_backlight_data,
+ },
+};
+
+static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
+ .pixclock = 110000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 6,
+ .right_margin = 4,
+ .vsync_len = 2,
+ .upper_margin = 2,
+ .lower_margin = 3,
+ .sync = FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
+ .pixclock = 50000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 0x9f,
+ .right_margin = 1,
+ .vsync_len = 44,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static struct pxafb_mode_info sharp_ls037_modes[] = {
+ [0] = {
+ .pixclock = 158000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 39,
+ .right_margin = 39,
+ .vsync_len = 1,
+ .upper_margin = 2,
+ .lower_margin = 3,
+ .sync = 0,
+ },
+ [1] = {
+ .pixclock = 39700,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 81,
+ .right_margin = 81,
+ .vsync_len = 1,
+ .upper_margin = 2,
+ .lower_margin = 7,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info zylonite_sharp_lcd_info = {
+ .modes = sharp_ls037_modes,
+ .num_modes = 2,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init zylonite_init_lcd(void)
+{
+ pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
+ platform_device_register(&zylonite_backlight_device);
+
+ if (lcd_id & 0x20) {
+ pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
+ return;
+ }
+
+ /* legacy LCD panels, it would be handy here if LCD panel type can
+ * be decided at run-time
+ */
+ if (1)
+ zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
+ else
+ zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
+
+ pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
+}
+#else
+static inline void zylonite_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_MMC)
+static struct pxamci_platform_data zylonite_mci_platform_data = {
+ .detect_delay_ms= 200,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = EXT_GPIO(0),
+ .gpio_card_ro = EXT_GPIO(2),
+ .gpio_power = -1,
+};
+
+static struct pxamci_platform_data zylonite_mci2_platform_data = {
+ .detect_delay_ms= 200,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = EXT_GPIO(1),
+ .gpio_card_ro = EXT_GPIO(3),
+ .gpio_power = -1,
+};
+
+static struct pxamci_platform_data zylonite_mci3_platform_data = {
+ .detect_delay_ms= 200,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = EXT_GPIO(30),
+ .gpio_card_ro = EXT_GPIO(31),
+ .gpio_power = -1,
+};
+
+static void __init zylonite_init_mmc(void)
+{
+ pxa_set_mci_info(&zylonite_mci_platform_data);
+ pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
+ if (cpu_is_pxa310())
+ pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
+}
+#else
+static inline void zylonite_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int zylonite_matrix_key_map[] = {
+ /* KEY(row, col, key_code) */
+ KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
+ KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
+ KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L),
+ KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P),
+ KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T),
+ KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X),
+ KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z),
+
+ KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3),
+ KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7),
+ KEY(4, 3, KEY_8), KEY(3, 4, KEY_9),
+
+ KEY(4, 5, KEY_SPACE),
+ KEY(5, 3, KEY_KPASTERISK), /* * */
+ KEY(5, 4, KEY_KPDOT), /* #" */
+
+ KEY(0, 7, KEY_UP),
+ KEY(1, 7, KEY_DOWN),
+ KEY(2, 7, KEY_LEFT),
+ KEY(3, 7, KEY_RIGHT),
+ KEY(2, 6, KEY_HOME),
+ KEY(3, 6, KEY_END),
+ KEY(6, 4, KEY_DELETE),
+ KEY(6, 6, KEY_BACK),
+ KEY(6, 3, KEY_CAPSLOCK), /* KEY_LEFTSHIFT), */
+
+ KEY(4, 6, KEY_ENTER), /* scroll push */
+ KEY(5, 7, KEY_ENTER), /* keypad action */
+
+ KEY(0, 4, KEY_EMAIL),
+ KEY(5, 6, KEY_SEND),
+ KEY(4, 0, KEY_CALENDAR),
+ KEY(7, 6, KEY_RECORD),
+ KEY(6, 7, KEY_VOLUMEUP),
+ KEY(7, 7, KEY_VOLUMEDOWN),
+
+ KEY(0, 6, KEY_F22), /* soft1 */
+ KEY(1, 6, KEY_F23), /* soft2 */
+ KEY(0, 3, KEY_AUX), /* contact */
+};
+
+static struct matrix_keymap_data zylonite_matrix_keymap_data = {
+ .keymap = zylonite_matrix_key_map,
+ .keymap_size = ARRAY_SIZE(zylonite_matrix_key_map),
+};
+
+static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
+ .matrix_key_rows = 8,
+ .matrix_key_cols = 8,
+ .matrix_keymap_data = &zylonite_matrix_keymap_data,
+
+ .enable_rotary0 = 1,
+ .rotary0_up_key = KEY_UP,
+ .rotary0_down_key = KEY_DOWN,
+
+ .debounce_interval = 30,
+};
+
+static void __init zylonite_init_keypad(void)
+{
+ pxa_set_keypad_info(&zylonite_keypad_info);
+}
+#else
+static inline void zylonite_init_keypad(void) {}
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
+static struct mtd_partition zylonite_nand_partitions[] = {
+ [0] = {
+ .name = "Bootloader",
+ .offset = 0,
+ .size = 0x060000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [1] = {
+ .name = "Kernel",
+ .offset = 0x060000,
+ .size = 0x200000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [2] = {
+ .name = "Filesystem",
+ .offset = 0x0260000,
+ .size = 0x3000000, /* 48M - rootfs */
+ },
+ [3] = {
+ .name = "MassStorage",
+ .offset = 0x3260000,
+ .size = 0x3d40000,
+ },
+ [4] = {
+ .name = "BBT",
+ .offset = 0x6FA0000,
+ .size = 0x80000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* NOTE: we reserve some blocks at the end of the NAND flash for
+ * bad block management, and the max number of relocation blocks
+ * differs on different platforms. Please take care with it when
+ * defining the partition table.
+ */
+};
+
+static struct pxa3xx_nand_platform_data zylonite_nand_info = {
+ .parts = zylonite_nand_partitions,
+ .nr_parts = ARRAY_SIZE(zylonite_nand_partitions),
+};
+
+static void __init zylonite_init_nand(void)
+{
+ pxa3xx_set_nand_info(&zylonite_nand_info);
+}
+#else
+static inline void zylonite_init_nand(void) {}
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data zylonite_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 |
+ POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init zylonite_init_ohci(void)
+{
+ pxa_set_ohci_info(&zylonite_ohci_info);
+}
+#else
+static inline void zylonite_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
+static void __init zylonite_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ /* board-processor specific initialization */
+ zylonite_pxa300_init();
+ zylonite_pxa320_init();
+
+ /*
+ * Note: We depend that the bootloader set
+ * the correct value to MSC register for SMC91x.
+ */
+ smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
+ smc91x_resources[1].end = PXA_GPIO_TO_IRQ(gpio_eth_irq);
+ platform_device_register(&smc91x_device);
+
+ pxa_set_ac97_info(NULL);
+ zylonite_init_lcd();
+ zylonite_init_mmc();
+ zylonite_init_keypad();
+ zylonite_init_nand();
+ zylonite_init_leds();
+ zylonite_init_ohci();
+}
+
+MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
+ .atag_offset = 0x100,
+ .map_io = pxa3xx_map_io,
+ .nr_irqs = ZYLONITE_NR_IRQS,
+ .init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .init_time = pxa_timer_init,
+ .init_machine = zylonite_init,
+ .restart = pxa_restart,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.h b/arch/arm/mach-pxa/zylonite.h
new file mode 100644
index 0000000..7300ec2
--- /dev/null
+++ b/arch/arm/mach-pxa/zylonite.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define ZYLONITE_ETH_PHYS 0x14000000
+
+#define EXT_GPIO(x) (128 + (x))
+
+#define ZYLONITE_NR_IRQS (IRQ_BOARD_START + 32)
+
+/* the following variables are processor specific and initialized
+ * by the corresponding zylonite_pxa3xx_init()
+ */
+extern int gpio_eth_irq;
+extern int gpio_debug_led1;
+extern int gpio_debug_led2;
+
+extern int wm9713_irq;
+
+extern int lcd_id;
+extern int lcd_orientation;
+
+#ifdef CONFIG_MACH_ZYLONITE300
+extern void zylonite_pxa300_init(void);
+#else
+static inline void zylonite_pxa300_init(void)
+{
+ if (cpu_is_pxa300() || cpu_is_pxa310())
+ panic("%s: PXA300/PXA310 not supported\n", __func__);
+}
+#endif
+
+#ifdef CONFIG_MACH_ZYLONITE320
+extern void zylonite_pxa320_init(void);
+#else
+static inline void zylonite_pxa320_init(void)
+{
+ if (cpu_is_pxa320())
+ panic("%s: PXA320 not supported\n", __func__);
+}
+#endif
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
new file mode 100644
index 0000000..0ff4e21
--- /dev/null
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -0,0 +1,281 @@
+/*
+ * linux/arch/arm/mach-pxa/zylonite_pxa300.c
+ *
+ * PXA300/PXA310 specific support code for the
+ * PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/gpio.h>
+
+#include "pxa300.h"
+#include "devices.h"
+#include "zylonite.h"
+
+#include "generic.h"
+
+/* PXA300/PXA310 common configurations */
+static mfp_cfg_t common_mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+ GPIO76_LCD_VSYNC,
+ GPIO127_LCD_CS_N,
+ GPIO20_PWM3_OUT, /* backlight */
+
+ /* BTUART */
+ GPIO111_UART2_RTS,
+ GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
+ GPIO113_UART2_TXD,
+ GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
+
+ /* STUART */
+ GPIO109_UART3_TXD,
+ GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
+
+ /* AC97 */
+ GPIO23_AC97_nACRESET,
+ GPIO24_AC97_SYSCLK,
+ GPIO29_AC97_BITCLK,
+ GPIO25_AC97_SDATA_IN_0,
+ GPIO27_AC97_SDATA_OUT,
+ GPIO28_AC97_SYNC,
+ GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
+
+ /* SSP3 */
+ GPIO91_SSP3_SCLK,
+ GPIO92_SSP3_FRM,
+ GPIO93_SSP3_TXD,
+ GPIO94_SSP3_RXD,
+
+ /* WM9713 IRQ */
+ GPIO26_GPIO,
+
+ /* Keypad */
+ GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+ GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+ GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+ GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+ GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+ GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
+ GPIO121_KP_MKOUT_0,
+ GPIO122_KP_MKOUT_1,
+ GPIO123_KP_MKOUT_2,
+ GPIO124_KP_MKOUT_3,
+ GPIO125_KP_MKOUT_4,
+ GPIO4_2_KP_MKOUT_5,
+ GPIO5_2_KP_MKOUT_6,
+ GPIO6_2_KP_MKOUT_7,
+
+ /* MMC1 */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD, /* CMD0 for slot 0 */
+ GPIO15_GPIO, /* CMD1 default as GPIO for slot 0 */
+
+ /* MMC2 */
+ GPIO9_MMC2_DAT0,
+ GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO11_MMC2_DAT2,
+ GPIO12_MMC2_DAT3,
+ GPIO13_MMC2_CLK,
+ GPIO14_MMC2_CMD,
+
+ /* USB Host */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+
+ /* Standard I2C */
+ GPIO21_I2C_SCL,
+ GPIO22_I2C_SDA,
+
+ /* GPIO */
+ GPIO18_GPIO | MFP_PULL_HIGH, /* GPIO Expander #0 INT_N */
+ GPIO19_GPIO | MFP_PULL_HIGH, /* GPIO Expander #1 INT_N */
+};
+
+static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
+ /* FFUART */
+ GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
+ GPIO31_UART1_TXD,
+ GPIO32_UART1_CTS,
+ GPIO37_UART1_RTS,
+ GPIO33_UART1_DCD,
+ GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
+ GPIO35_UART1_RI,
+ GPIO36_UART1_DTR,
+
+ /* Ethernet */
+ GPIO2_nCS3,
+ GPIO99_GPIO,
+};
+
+static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
+ /* FFUART */
+ GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL,
+ GPIO100_UART1_TXD,
+ GPIO101_UART1_CTS,
+ GPIO106_UART1_RTS,
+
+ /* Ethernet */
+ GPIO2_nCS3,
+ GPIO102_GPIO,
+
+ /* MMC3 */
+ GPIO7_2_MMC3_DAT0,
+ GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO9_2_MMC3_DAT2,
+ GPIO10_2_MMC3_DAT3,
+ GPIO103_MMC3_CLK,
+ GPIO105_MMC3_CMD,
+};
+
+#define NUM_LCD_DETECT_PINS 7
+
+static int lcd_detect_pins[] __initdata = {
+ MFP_PIN_GPIO71, /* LCD_LDD_17 - ORIENT */
+ MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */
+ MFP_PIN_GPIO75, /* LCD_BIAS - LCDID[4] */
+ MFP_PIN_GPIO73, /* LCD_LCLK - LCDID[3] */
+ MFP_PIN_GPIO72, /* LCD_FCLK - LCDID[2] */
+ MFP_PIN_GPIO127,/* LCD_CS_N - LCDID[1] */
+ MFP_PIN_GPIO76, /* LCD_VSYNC - LCDID[0] */
+};
+
+static void __init zylonite_detect_lcd_panel(void)
+{
+ unsigned long mfpr_save[NUM_LCD_DETECT_PINS];
+ int i, gpio, id = 0;
+
+ /* save the original MFP settings of these pins and configure
+ * them as GPIO Input, DS01X, Pull Neither, Edge Clear
+ */
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+ mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
+ pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440);
+ }
+
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+ id = id << 1;
+ gpio = mfp_to_gpio(lcd_detect_pins[i]);
+ gpio_request(gpio, "LCD_ID_PINS");
+ gpio_direction_input(gpio);
+
+ if (gpio_get_value(gpio))
+ id = id | 0x1;
+ gpio_free(gpio);
+ }
+
+ /* lcd id, flush out bit 1 */
+ lcd_id = id & 0x3d;
+
+ /* lcd orientation, portrait or landscape */
+ lcd_orientation = (id >> 6) & 0x1;
+
+ /* restore the original MFP settings */
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++)
+ pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static struct pca953x_platform_data gpio_exp[] = {
+ [0] = {
+ .gpio_base = 128,
+ },
+ [1] = {
+ .gpio_base = 144,
+ },
+};
+
+static struct i2c_board_info zylonite_i2c_board_info[] = {
+ {
+ .type = "pca9539",
+ .addr = 0x74,
+ .platform_data = &gpio_exp[0],
+ .irq = PXA_GPIO_TO_IRQ(18),
+ }, {
+ .type = "pca9539",
+ .addr = 0x75,
+ .platform_data = &gpio_exp[1],
+ .irq = PXA_GPIO_TO_IRQ(19),
+ },
+};
+
+static void __init zylonite_init_i2c(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
+}
+#else
+static inline void zylonite_init_i2c(void) {}
+#endif
+
+void __init zylonite_pxa300_init(void)
+{
+ if (cpu_is_pxa300() || cpu_is_pxa310()) {
+ /* initialize MFP */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg));
+
+ /* detect LCD panel */
+ zylonite_detect_lcd_panel();
+
+ /* WM9713 IRQ */
+ wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+ zylonite_init_i2c();
+ }
+
+ if (cpu_is_pxa300()) {
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg));
+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99);
+ }
+
+ if (cpu_is_pxa310()) {
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
+ }
+
+ /* GPIOs for Debug LEDs */
+ gpio_debug_led1 = EXT_GPIO(25);
+ gpio_debug_led2 = EXT_GPIO(26);
+}
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
new file mode 100644
index 0000000..47961ae
--- /dev/null
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -0,0 +1,215 @@
+/*
+ * linux/arch/arm/mach-pxa/zylonite_pxa320.c
+ *
+ * PXA320 specific support code for the
+ * PXA3xx Development Platform (aka Zylonite)
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include "pxa320.h"
+#include "zylonite.h"
+
+#include "generic.h"
+
+static mfp_cfg_t mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO6_2_LCD_LDD_0,
+ GPIO7_2_LCD_LDD_1,
+ GPIO8_2_LCD_LDD_2,
+ GPIO9_2_LCD_LDD_3,
+ GPIO10_2_LCD_LDD_4,
+ GPIO11_2_LCD_LDD_5,
+ GPIO12_2_LCD_LDD_6,
+ GPIO13_2_LCD_LDD_7,
+ GPIO63_LCD_LDD_8,
+ GPIO64_LCD_LDD_9,
+ GPIO65_LCD_LDD_10,
+ GPIO66_LCD_LDD_11,
+ GPIO67_LCD_LDD_12,
+ GPIO68_LCD_LDD_13,
+ GPIO69_LCD_LDD_14,
+ GPIO70_LCD_LDD_15,
+ GPIO71_LCD_LDD_16,
+ GPIO72_LCD_LDD_17,
+ GPIO73_LCD_CS_N,
+ GPIO74_LCD_VSYNC,
+ GPIO14_2_LCD_FCLK,
+ GPIO15_2_LCD_LCLK,
+ GPIO16_2_LCD_PCLK,
+ GPIO17_2_LCD_BIAS,
+ GPIO14_PWM3_OUT, /* backlight */
+
+ /* FFUART */
+ GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
+ GPIO42_UART1_TXD,
+ GPIO43_UART1_CTS,
+ GPIO44_UART1_DCD,
+ GPIO45_UART1_DSR | MFP_LPM_EDGE_FALL,
+ GPIO46_UART1_RI,
+ GPIO47_UART1_DTR,
+ GPIO48_UART1_RTS,
+
+ /* AC97 */
+ GPIO34_AC97_SYSCLK,
+ GPIO35_AC97_SDATA_IN_0,
+ GPIO37_AC97_SDATA_OUT,
+ GPIO38_AC97_SYNC,
+ GPIO39_AC97_BITCLK,
+ GPIO40_AC97_nACRESET,
+ GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
+
+ /* SSP3 */
+ GPIO89_SSP3_SCLK,
+ GPIO90_SSP3_FRM,
+ GPIO91_SSP3_TXD,
+ GPIO92_SSP3_RXD,
+
+ /* WM9713 IRQ */
+ GPIO15_GPIO,
+
+ /* I2C */
+ GPIO32_I2C_SCL,
+ GPIO33_I2C_SDA,
+
+ /* Keypad */
+ GPIO105_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO106_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO113_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO114_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO115_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+ GPIO116_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+ GPIO117_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+ GPIO118_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+ GPIO119_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+ GPIO120_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
+ GPIO121_KP_MKOUT_0,
+ GPIO122_KP_MKOUT_1,
+ GPIO123_KP_MKOUT_2,
+ GPIO124_KP_MKOUT_3,
+ GPIO125_KP_MKOUT_4,
+ GPIO126_KP_MKOUT_5,
+ GPIO127_KP_MKOUT_6,
+ GPIO5_2_KP_MKOUT_7,
+
+ /* Ethernet */
+ GPIO4_nCS3,
+ GPIO90_GPIO,
+
+ /* MMC1 */
+ GPIO18_MMC1_DAT0,
+ GPIO19_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO20_MMC1_DAT2,
+ GPIO21_MMC1_DAT3,
+ GPIO22_MMC1_CLK,
+ GPIO23_MMC1_CMD,/* CMD0 for slot 0 */
+ GPIO31_GPIO, /* CMD1 default as GPIO for slot 0 */
+
+ /* MMC2 */
+ GPIO24_MMC2_DAT0,
+ GPIO25_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO26_MMC2_DAT2,
+ GPIO27_MMC2_DAT3,
+ GPIO28_MMC2_CLK,
+ GPIO29_MMC2_CMD,
+
+ /* USB Host */
+ GPIO2_2_USBH_PEN,
+ GPIO3_2_USBH_PWR,
+
+ /* Debug LEDs */
+ GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
+ GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+#define NUM_LCD_DETECT_PINS 7
+
+static int lcd_detect_pins[] __initdata = {
+ MFP_PIN_GPIO72, /* LCD_LDD_17 - ORIENT */
+ MFP_PIN_GPIO71, /* LCD_LDD_16 - LCDID[5] */
+ MFP_PIN_GPIO17_2, /* LCD_BIAS - LCDID[4] */
+ MFP_PIN_GPIO15_2, /* LCD_LCLK - LCDID[3] */
+ MFP_PIN_GPIO14_2, /* LCD_FCLK - LCDID[2] */
+ MFP_PIN_GPIO73, /* LCD_CS_N - LCDID[1] */
+ MFP_PIN_GPIO74, /* LCD_VSYNC - LCDID[0] */
+ /*
+ * set the MFP_PIN_GPIO 14/15/17 to alternate function other than
+ * GPIO to avoid input level confliction with 14_2, 15_2, 17_2
+ */
+ MFP_PIN_GPIO14,
+ MFP_PIN_GPIO15,
+ MFP_PIN_GPIO17,
+};
+
+static int lcd_detect_mfpr[] __initdata = {
+ /* AF0, DS 1X, Pull Neither, Edge Clear */
+ 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440,
+ 0xc442, /* Backlight, Pull-Up, AF2 */
+ 0x8445, /* AF5 */
+ 0x8445, /* AF5 */
+};
+
+static void __init zylonite_detect_lcd_panel(void)
+{
+ unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)];
+ int i, gpio, id = 0;
+
+ /* save the original MFP settings of these pins and configure them
+ * as GPIO Input, DS01X, Pull Neither, Edge Clear
+ */
+ for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) {
+ mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
+ pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]);
+ }
+
+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
+ id = id << 1;
+ gpio = mfp_to_gpio(lcd_detect_pins[i]);
+ gpio_request(gpio, "LCD_ID_PINS");
+ gpio_direction_input(gpio);
+
+ if (gpio_get_value(gpio))
+ id = id | 0x1;
+ gpio_free(gpio);
+ }
+
+ /* lcd id, flush out bit 1 */
+ lcd_id = id & 0x3d;
+
+ /* lcd orientation, portrait or landscape */
+ lcd_orientation = (id >> 6) & 0x1;
+
+ /* restore the original MFP settings */
+ for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++)
+ pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
+}
+
+void __init zylonite_pxa320_init(void)
+{
+ if (cpu_is_pxa320()) {
+ /* initialize MFP */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
+
+ /* detect LCD panel */
+ zylonite_detect_lcd_panel();
+
+ /* GPIO pin assignment */
+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9);
+ gpio_debug_led1 = mfp_to_gpio(MFP_PIN_GPIO1_2);
+ gpio_debug_led2 = mfp_to_gpio(MFP_PIN_GPIO4_2);
+
+ /* WM9713 IRQ */
+ wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
+ }
+}