v4.19.13 snapshot.
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
new file mode 100644
index 0000000..37ff25e
--- /dev/null
+++ b/arch/arm/mach-omap2/i2c.c
@@ -0,0 +1,93 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "soc.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
+
+#include "prm.h"
+#include "common.h"
+#include "i2c.h"
+
+/* In register I2C_CON, Bit 15 is the I2C enable bit */
+#define I2C_EN BIT(15)
+#define OMAP2_I2C_CON_OFFSET 0x24
+#define OMAP4_I2C_CON_OFFSET 0xA4
+
+#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16
+
+/**
+ * omap_i2c_reset - reset the omap i2c module.
+ * @oh: struct omap_hwmod *
+ *
+ * The i2c moudle in omap2, omap3 had a special sequence to reset. The
+ * sequence is:
+ * - Disable the I2C.
+ * - Write to SOFTRESET bit.
+ * - Enable the I2C.
+ * - Poll on the RESETDONE bit.
+ * The sequence is implemented in below function. This is called for 2420,
+ * 2430 and omap3.
+ */
+int omap_i2c_reset(struct omap_hwmod *oh)
+{
+ u32 v;
+ u16 i2c_con;
+ int c = 0;
+
+ if (oh->class->rev == OMAP_I2C_IP_VERSION_2) {
+ i2c_con = OMAP4_I2C_CON_OFFSET;
+ } else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) {
+ i2c_con = OMAP2_I2C_CON_OFFSET;
+ } else {
+ WARN(1, "Cannot reset I2C block %s: unsupported revision\n",
+ oh->name);
+ return -EINVAL;
+ }
+
+ /* Disable I2C */
+ v = omap_hwmod_read(oh, i2c_con);
+ v &= ~I2C_EN;
+ omap_hwmod_write(v, oh, i2c_con);
+
+ /* Write to the SOFTRESET bit */
+ omap_hwmod_softreset(oh);
+
+ /* Enable I2C */
+ v = omap_hwmod_read(oh, i2c_con);
+ v |= I2C_EN;
+ omap_hwmod_write(v, oh, i2c_con);
+
+ /* Poll on RESETDONE bit */
+ omap_test_timeout((omap_hwmod_read(oh,
+ oh->class->sysc->syss_offs)
+ & SYSS_RESETDONE_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+
+ if (c == MAX_MODULE_SOFTRESET_WAIT)
+ pr_warn("%s: %s: softreset failed (waited %d usec)\n",
+ __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+ else
+ pr_debug("%s: %s: softreset in %d usec\n", __func__,
+ oh->name, c);
+
+ return 0;
+}