v4.19.13 snapshot.
diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c
new file mode 100644
index 0000000..8b47600
--- /dev/null
+++ b/arch/arm/mach-mmp/pm-pxa910.c
@@ -0,0 +1,274 @@
+/*
+ * PXA910 Power Management Routines
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
+ *
+ * (C) Copyright 2009 Marvell International Ltd.
+ * All Rights Reserved
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/outercache.h>
+
+#include "cputype.h"
+#include "addr-map.h"
+#include "pm-pxa910.h"
+#include "regs-icu.h"
+#include "irqs.h"
+
+int pxa910_set_wake(struct irq_data *data, unsigned int on)
+{
+ uint32_t awucrm = 0, apcr = 0;
+ int irq = data->irq;
+
+ /* setting wakeup sources */
+ switch (irq) {
+ /* wakeup line 2 */
+ case IRQ_PXA910_AP_GPIO:
+ awucrm = MPMU_AWUCRM_WAKEUP(2);
+ apcr |= MPMU_APCR_SLPWP2;
+ break;
+ /* wakeup line 3 */
+ case IRQ_PXA910_KEYPAD:
+ awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_KEYPRESS;
+ apcr |= MPMU_APCR_SLPWP3;
+ break;
+ case IRQ_PXA910_ROTARY:
+ awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_NEWROTARY;
+ apcr |= MPMU_APCR_SLPWP3;
+ break;
+ case IRQ_PXA910_TRACKBALL:
+ awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_TRACKBALL;
+ apcr |= MPMU_APCR_SLPWP3;
+ break;
+ /* wakeup line 4 */
+ case IRQ_PXA910_AP1_TIMER1:
+ awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_1;
+ apcr |= MPMU_APCR_SLPWP4;
+ break;
+ case IRQ_PXA910_AP1_TIMER2:
+ awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_2;
+ apcr |= MPMU_APCR_SLPWP4;
+ break;
+ case IRQ_PXA910_AP1_TIMER3:
+ awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_3;
+ apcr |= MPMU_APCR_SLPWP4;
+ break;
+ case IRQ_PXA910_AP2_TIMER1:
+ awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_1;
+ apcr |= MPMU_APCR_SLPWP4;
+ break;
+ case IRQ_PXA910_AP2_TIMER2:
+ awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_2;
+ apcr |= MPMU_APCR_SLPWP4;
+ break;
+ case IRQ_PXA910_AP2_TIMER3:
+ awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_3;
+ apcr |= MPMU_APCR_SLPWP4;
+ break;
+ case IRQ_PXA910_RTC_ALARM:
+ awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_RTC_ALARM;
+ apcr |= MPMU_APCR_SLPWP4;
+ break;
+ /* wakeup line 5 */
+ case IRQ_PXA910_USB1:
+ case IRQ_PXA910_USB2:
+ awucrm = MPMU_AWUCRM_WAKEUP(5);
+ apcr |= MPMU_APCR_SLPWP5;
+ break;
+ /* wakeup line 6 */
+ case IRQ_PXA910_MMC:
+ awucrm = MPMU_AWUCRM_WAKEUP(6)
+ | MPMU_AWUCRM_SDH1
+ | MPMU_AWUCRM_SDH2;
+ apcr |= MPMU_APCR_SLPWP6;
+ break;
+ /* wakeup line 7 */
+ case IRQ_PXA910_PMIC_INT:
+ awucrm = MPMU_AWUCRM_WAKEUP(7);
+ apcr |= MPMU_APCR_SLPWP7;
+ break;
+ default:
+ if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
+ awucrm = MPMU_AWUCRM_WAKEUP(2);
+ apcr |= MPMU_APCR_SLPWP2;
+ } else {
+ /* FIXME: This should return a proper error code ! */
+ printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
+ irq);
+ }
+ }
+
+ if (on) {
+ if (awucrm) {
+ awucrm |= __raw_readl(MPMU_AWUCRM);
+ __raw_writel(awucrm, MPMU_AWUCRM);
+ }
+ if (apcr) {
+ apcr = ~apcr & __raw_readl(MPMU_APCR);
+ __raw_writel(apcr, MPMU_APCR);
+ }
+ } else {
+ if (awucrm) {
+ awucrm = ~awucrm & __raw_readl(MPMU_AWUCRM);
+ __raw_writel(awucrm, MPMU_AWUCRM);
+ }
+ if (apcr) {
+ apcr |= __raw_readl(MPMU_APCR);
+ __raw_writel(apcr, MPMU_APCR);
+ }
+ }
+ return 0;
+}
+
+void pxa910_pm_enter_lowpower_mode(int state)
+{
+ uint32_t idle_cfg, apcr;
+
+ idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
+ apcr = __raw_readl(MPMU_APCR);
+
+ apcr &= ~(MPMU_APCR_DDRCORSD | MPMU_APCR_APBSD | MPMU_APCR_AXISD
+ | MPMU_APCR_VCTCXOSD | MPMU_APCR_STBYEN);
+ idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_IDLE
+ | APMU_MOH_IDLE_CFG_MOH_PWRDWN);
+
+ switch (state) {
+ case POWER_MODE_UDR:
+ /* only shutdown APB in UDR */
+ apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD;
+ /* fall through */
+ case POWER_MODE_SYS_SLEEP:
+ apcr |= MPMU_APCR_SLPEN; /* set the SLPEN bit */
+ apcr |= MPMU_APCR_VCTCXOSD; /* set VCTCXOSD */
+ /* fall through */
+ case POWER_MODE_APPS_SLEEP:
+ apcr |= MPMU_APCR_DDRCORSD; /* set DDRCORSD */
+ /* fall through */
+ case POWER_MODE_APPS_IDLE:
+ apcr |= MPMU_APCR_AXISD; /* set AXISDD bit */
+ /* fall through */
+ case POWER_MODE_CORE_EXTIDLE:
+ idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE;
+ idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN;
+ idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3)
+ | APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3);
+ /* fall through */
+ case POWER_MODE_CORE_INTIDLE:
+ break;
+ }
+
+ /* program the memory controller hardware sleep type and auto wakeup */
+ idle_cfg |= APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ;
+ idle_cfg |= APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN;
+ __raw_writel(0x0, APMU_MC_HW_SLP_TYPE); /* auto refresh */
+
+ /* set DSPSD, DTCMSD, BBSD, MSASLPEN */
+ apcr |= MPMU_APCR_DSPSD | MPMU_APCR_DTCMSD | MPMU_APCR_BBSD
+ | MPMU_APCR_MSASLPEN;
+
+ /*always set SLEPEN bit mainly for MSA*/
+ apcr |= MPMU_APCR_SLPEN;
+
+ /* finally write the registers back */
+ __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
+ __raw_writel(apcr, MPMU_APCR);
+
+}
+
+static int pxa910_pm_enter(suspend_state_t state)
+{
+ unsigned int idle_cfg, reg = 0;
+
+ /*pmic thread not completed,exit;otherwise system can't be waked up*/
+ reg = __raw_readl(ICU_INT_CONF(IRQ_PXA910_PMIC_INT));
+ if ((reg & 0x3) == 0)
+ return -EAGAIN;
+
+ idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
+ idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN
+ | APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN;
+ __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
+
+ /* disable L2 */
+ outer_disable();
+ /* wait for l2 idle */
+ while (!(readl(CIU_REG(0x8)) & (1 << 16)))
+ udelay(1);
+
+ cpu_do_idle();
+
+ /* enable L2 */
+ outer_resume();
+ /* wait for l2 idle */
+ while (!(readl(CIU_REG(0x8)) & (1 << 16)))
+ udelay(1);
+
+ idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
+ idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_PWRDWN
+ | APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN);
+ __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
+
+ return 0;
+}
+
+/*
+ * Called after processes are frozen, but before we shut down devices.
+ */
+static int pxa910_pm_prepare(void)
+{
+ pxa910_pm_enter_lowpower_mode(POWER_MODE_UDR);
+ return 0;
+}
+
+/*
+ * Called after devices are re-setup, but before processes are thawed.
+ */
+static void pxa910_pm_finish(void)
+{
+ pxa910_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
+}
+
+static int pxa910_pm_valid(suspend_state_t state)
+{
+ return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
+}
+
+static const struct platform_suspend_ops pxa910_pm_ops = {
+ .valid = pxa910_pm_valid,
+ .prepare = pxa910_pm_prepare,
+ .enter = pxa910_pm_enter,
+ .finish = pxa910_pm_finish,
+};
+
+static int __init pxa910_pm_init(void)
+{
+ uint32_t awucrm = 0;
+
+ if (!cpu_is_pxa910())
+ return -EIO;
+
+ suspend_set_ops(&pxa910_pm_ops);
+
+ /* Set the following bits for MMP3 playback with VCTXO on */
+ __raw_writel(__raw_readl(APMU_SQU_CLK_GATE_CTRL) | (1 << 30),
+ APMU_SQU_CLK_GATE_CTRL);
+ __raw_writel(__raw_readl(MPMU_FCCR) | (1 << 28), MPMU_FCCR);
+
+ awucrm |= MPMU_AWUCRM_AP_ASYNC_INT | MPMU_AWUCRM_AP_FULL_IDLE;
+ __raw_writel(awucrm, MPMU_AWUCRM);
+
+ return 0;
+}
+
+late_initcall(pxa910_pm_init);