v4.19.13 snapshot.
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
new file mode 100644
index 0000000..53c316f
--- /dev/null
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -0,0 +1,608 @@
+/*
+ * iop13xx platform Initialization
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/serial_8250.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+#ifdef CONFIG_MTD_PHYSMAP
+#include <linux/mtd/physmap.h>
+#endif
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/hardware/iop_adma.h>
+#include <mach/irqs.h>
+
+#define IOP13XX_UART_XTAL 33334000
+#define IOP13XX_SETUP_DEBUG 0
+#define PRINTK(x...) ((void)(IOP13XX_SETUP_DEBUG && printk(x)))
+
+/* Standard IO mapping for all IOP13XX based systems
+ */
+static struct map_desc iop13xx_std_desc[] __initdata = {
+ { /* mem mapped registers */
+ .virtual = (unsigned long)IOP13XX_PMMR_VIRT_MEM_BASE,
+ .pfn = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE),
+ .length = IOP13XX_PMMR_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct resource iop13xx_uart0_resources[] = {
+ [0] = {
+ .start = IOP13XX_UART0_PHYS,
+ .end = IOP13XX_UART0_PHYS + 0x3f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_UART0,
+ .end = IRQ_IOP13XX_UART0,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct resource iop13xx_uart1_resources[] = {
+ [0] = {
+ .start = IOP13XX_UART1_PHYS,
+ .end = IOP13XX_UART1_PHYS + 0x3f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_UART1,
+ .end = IRQ_IOP13XX_UART1,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct plat_serial8250_port iop13xx_uart0_data[] = {
+ {
+ .membase = IOP13XX_UART0_VIRT,
+ .mapbase = IOP13XX_UART0_PHYS,
+ .irq = IRQ_IOP13XX_UART0,
+ .uartclk = IOP13XX_UART_XTAL,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_SKIP_TEST,
+ },
+ { },
+};
+
+static struct plat_serial8250_port iop13xx_uart1_data[] = {
+ {
+ .membase = IOP13XX_UART1_VIRT,
+ .mapbase = IOP13XX_UART1_PHYS,
+ .irq = IRQ_IOP13XX_UART1,
+ .uartclk = IOP13XX_UART_XTAL,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_SKIP_TEST,
+ },
+ { },
+};
+
+/* The ids are fixed up later in iop13xx_platform_init */
+static struct platform_device iop13xx_uart0 = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = iop13xx_uart0_data,
+ .num_resources = 2,
+ .resource = iop13xx_uart0_resources,
+};
+
+static struct platform_device iop13xx_uart1 = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = iop13xx_uart1_data,
+ .num_resources = 2,
+ .resource = iop13xx_uart1_resources
+};
+
+static struct resource iop13xx_i2c_0_resources[] = {
+ [0] = {
+ .start = IOP13XX_I2C0_PHYS,
+ .end = IOP13XX_I2C0_PHYS + 0x18,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_I2C_0,
+ .end = IRQ_IOP13XX_I2C_0,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct resource iop13xx_i2c_1_resources[] = {
+ [0] = {
+ .start = IOP13XX_I2C1_PHYS,
+ .end = IOP13XX_I2C1_PHYS + 0x18,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_I2C_1,
+ .end = IRQ_IOP13XX_I2C_1,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct resource iop13xx_i2c_2_resources[] = {
+ [0] = {
+ .start = IOP13XX_I2C2_PHYS,
+ .end = IOP13XX_I2C2_PHYS + 0x18,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_I2C_2,
+ .end = IRQ_IOP13XX_I2C_2,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+/* I2C controllers. The IOP13XX uses the same block as the IOP3xx, so
+ * we just use the same device name.
+ */
+
+/* The ids are fixed up later in iop13xx_platform_init */
+static struct platform_device iop13xx_i2c_0_controller = {
+ .name = "IOP3xx-I2C",
+ .id = 0,
+ .num_resources = 2,
+ .resource = iop13xx_i2c_0_resources
+};
+
+static struct platform_device iop13xx_i2c_1_controller = {
+ .name = "IOP3xx-I2C",
+ .id = 0,
+ .num_resources = 2,
+ .resource = iop13xx_i2c_1_resources
+};
+
+static struct platform_device iop13xx_i2c_2_controller = {
+ .name = "IOP3xx-I2C",
+ .id = 0,
+ .num_resources = 2,
+ .resource = iop13xx_i2c_2_resources
+};
+
+#ifdef CONFIG_MTD_PHYSMAP
+/* PBI Flash Device
+ */
+static struct physmap_flash_data iq8134x_flash_data = {
+ .width = 2,
+};
+
+static struct resource iq8134x_flash_resource = {
+ .start = IQ81340_FLASHBASE,
+ .end = 0,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq8134x_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = { .platform_data = &iq8134x_flash_data, },
+ .num_resources = 1,
+ .resource = &iq8134x_flash_resource,
+};
+
+static unsigned long iq8134x_probe_flash_size(void)
+{
+ uint8_t __iomem *flash_addr = ioremap(IQ81340_FLASHBASE, PAGE_SIZE);
+ int i;
+ char query[3];
+ unsigned long size = 0;
+ int width = iq8134x_flash_data.width;
+
+ if (flash_addr) {
+ /* send CFI 'query' command */
+ writew(0x98, flash_addr);
+
+ /* check for CFI compliance */
+ for (i = 0; i < 3 * width; i += width)
+ query[i / width] = readb(flash_addr + (0x10 * width) + i);
+
+ /* read the size */
+ if (memcmp(query, "QRY", 3) == 0)
+ size = 1 << readb(flash_addr + (0x27 * width));
+
+ /* send CFI 'read array' command */
+ writew(0xff, flash_addr);
+
+ iounmap(flash_addr);
+ }
+
+ return size;
+}
+#endif
+
+/* ADMA Channels */
+static struct resource iop13xx_adma_0_resources[] = {
+ [0] = {
+ .start = IOP13XX_ADMA_PHYS_BASE(0),
+ .end = IOP13XX_ADMA_UPPER_PA(0),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_ADMA0_EOT,
+ .end = IRQ_IOP13XX_ADMA0_EOT,
+ .flags = IORESOURCE_IRQ
+ },
+ [2] = {
+ .start = IRQ_IOP13XX_ADMA0_EOC,
+ .end = IRQ_IOP13XX_ADMA0_EOC,
+ .flags = IORESOURCE_IRQ
+ },
+ [3] = {
+ .start = IRQ_IOP13XX_ADMA0_ERR,
+ .end = IRQ_IOP13XX_ADMA0_ERR,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct resource iop13xx_adma_1_resources[] = {
+ [0] = {
+ .start = IOP13XX_ADMA_PHYS_BASE(1),
+ .end = IOP13XX_ADMA_UPPER_PA(1),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_ADMA1_EOT,
+ .end = IRQ_IOP13XX_ADMA1_EOT,
+ .flags = IORESOURCE_IRQ
+ },
+ [2] = {
+ .start = IRQ_IOP13XX_ADMA1_EOC,
+ .end = IRQ_IOP13XX_ADMA1_EOC,
+ .flags = IORESOURCE_IRQ
+ },
+ [3] = {
+ .start = IRQ_IOP13XX_ADMA1_ERR,
+ .end = IRQ_IOP13XX_ADMA1_ERR,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct resource iop13xx_adma_2_resources[] = {
+ [0] = {
+ .start = IOP13XX_ADMA_PHYS_BASE(2),
+ .end = IOP13XX_ADMA_UPPER_PA(2),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP13XX_ADMA2_EOT,
+ .end = IRQ_IOP13XX_ADMA2_EOT,
+ .flags = IORESOURCE_IRQ
+ },
+ [2] = {
+ .start = IRQ_IOP13XX_ADMA2_EOC,
+ .end = IRQ_IOP13XX_ADMA2_EOC,
+ .flags = IORESOURCE_IRQ
+ },
+ [3] = {
+ .start = IRQ_IOP13XX_ADMA2_ERR,
+ .end = IRQ_IOP13XX_ADMA2_ERR,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
+static struct iop_adma_platform_data iop13xx_adma_0_data = {
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct iop_adma_platform_data iop13xx_adma_1_data = {
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct iop_adma_platform_data iop13xx_adma_2_data = {
+ .hw_id = 2,
+ .pool_size = PAGE_SIZE,
+};
+
+/* The ids are fixed up later in iop13xx_platform_init */
+static struct platform_device iop13xx_adma_0_channel = {
+ .name = "iop-adma",
+ .id = 0,
+ .num_resources = 4,
+ .resource = iop13xx_adma_0_resources,
+ .dev = {
+ .dma_mask = &iop13xx_adma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *) &iop13xx_adma_0_data,
+ },
+};
+
+static struct platform_device iop13xx_adma_1_channel = {
+ .name = "iop-adma",
+ .id = 0,
+ .num_resources = 4,
+ .resource = iop13xx_adma_1_resources,
+ .dev = {
+ .dma_mask = &iop13xx_adma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *) &iop13xx_adma_1_data,
+ },
+};
+
+static struct platform_device iop13xx_adma_2_channel = {
+ .name = "iop-adma",
+ .id = 0,
+ .num_resources = 4,
+ .resource = iop13xx_adma_2_resources,
+ .dev = {
+ .dma_mask = &iop13xx_adma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *) &iop13xx_adma_2_data,
+ },
+};
+
+void __init iop13xx_map_io(void)
+{
+ /* Initialize the Static Page Table maps */
+ iotable_init(iop13xx_std_desc, ARRAY_SIZE(iop13xx_std_desc));
+}
+
+static int init_uart;
+static int init_i2c;
+static int init_adma;
+
+void __init iop13xx_platform_init(void)
+{
+ int i;
+ u32 uart_idx, i2c_idx, adma_idx, plat_idx;
+ struct platform_device *iop13xx_devices[IQ81340_MAX_PLAT_DEVICES];
+
+ /* set the bases so we can read the device id */
+ iop13xx_set_atu_mmr_bases();
+
+ memset(iop13xx_devices, 0, sizeof(iop13xx_devices));
+
+ if (init_uart == IOP13XX_INIT_UART_DEFAULT) {
+ switch (iop13xx_dev_id()) {
+ /* enable both uarts on iop341 */
+ case 0x3380:
+ case 0x3384:
+ case 0x3388:
+ case 0x338c:
+ init_uart |= IOP13XX_INIT_UART_0;
+ init_uart |= IOP13XX_INIT_UART_1;
+ break;
+ /* only enable uart 1 */
+ default:
+ init_uart |= IOP13XX_INIT_UART_1;
+ }
+ }
+
+ if (init_i2c == IOP13XX_INIT_I2C_DEFAULT) {
+ switch (iop13xx_dev_id()) {
+ /* enable all i2c units on iop341 and iop342 */
+ case 0x3380:
+ case 0x3384:
+ case 0x3388:
+ case 0x338c:
+ case 0x3382:
+ case 0x3386:
+ case 0x338a:
+ case 0x338e:
+ init_i2c |= IOP13XX_INIT_I2C_0;
+ init_i2c |= IOP13XX_INIT_I2C_1;
+ init_i2c |= IOP13XX_INIT_I2C_2;
+ break;
+ /* only enable i2c 1 and 2 */
+ default:
+ init_i2c |= IOP13XX_INIT_I2C_1;
+ init_i2c |= IOP13XX_INIT_I2C_2;
+ }
+ }
+
+ if (init_adma == IOP13XX_INIT_ADMA_DEFAULT) {
+ init_adma |= IOP13XX_INIT_ADMA_0;
+ init_adma |= IOP13XX_INIT_ADMA_1;
+ init_adma |= IOP13XX_INIT_ADMA_2;
+ }
+
+ plat_idx = 0;
+ uart_idx = 0;
+ i2c_idx = 0;
+
+ /* uart 1 (if enabled) is ttyS0 */
+ if (init_uart & IOP13XX_INIT_UART_1) {
+ PRINTK("Adding uart1 to platform device list\n");
+ iop13xx_uart1.id = uart_idx++;
+ iop13xx_devices[plat_idx++] = &iop13xx_uart1;
+ }
+ if (init_uart & IOP13XX_INIT_UART_0) {
+ PRINTK("Adding uart0 to platform device list\n");
+ iop13xx_uart0.id = uart_idx++;
+ iop13xx_devices[plat_idx++] = &iop13xx_uart0;
+ }
+
+ for(i = 0; i < IQ81340_NUM_I2C; i++) {
+ if ((init_i2c & (1 << i)) && IOP13XX_SETUP_DEBUG)
+ printk("Adding i2c%d to platform device list\n", i);
+ switch(init_i2c & (1 << i)) {
+ case IOP13XX_INIT_I2C_0:
+ iop13xx_i2c_0_controller.id = i2c_idx++;
+ iop13xx_devices[plat_idx++] =
+ &iop13xx_i2c_0_controller;
+ break;
+ case IOP13XX_INIT_I2C_1:
+ iop13xx_i2c_1_controller.id = i2c_idx++;
+ iop13xx_devices[plat_idx++] =
+ &iop13xx_i2c_1_controller;
+ break;
+ case IOP13XX_INIT_I2C_2:
+ iop13xx_i2c_2_controller.id = i2c_idx++;
+ iop13xx_devices[plat_idx++] =
+ &iop13xx_i2c_2_controller;
+ break;
+ }
+ }
+
+ /* initialize adma channel ids and capabilities */
+ adma_idx = 0;
+ for (i = 0; i < IQ81340_NUM_ADMA; i++) {
+ struct iop_adma_platform_data *plat_data;
+ if ((init_adma & (1 << i)) && IOP13XX_SETUP_DEBUG)
+ printk(KERN_INFO
+ "Adding adma%d to platform device list\n", i);
+ switch (init_adma & (1 << i)) {
+ case IOP13XX_INIT_ADMA_0:
+ iop13xx_adma_0_channel.id = adma_idx++;
+ iop13xx_devices[plat_idx++] = &iop13xx_adma_0_channel;
+ plat_data = &iop13xx_adma_0_data;
+ dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
+ dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
+ break;
+ case IOP13XX_INIT_ADMA_1:
+ iop13xx_adma_1_channel.id = adma_idx++;
+ iop13xx_devices[plat_idx++] = &iop13xx_adma_1_channel;
+ plat_data = &iop13xx_adma_1_data;
+ dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
+ dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
+ break;
+ case IOP13XX_INIT_ADMA_2:
+ iop13xx_adma_2_channel.id = adma_idx++;
+ iop13xx_devices[plat_idx++] = &iop13xx_adma_2_channel;
+ plat_data = &iop13xx_adma_2_data;
+ dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
+ dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
+ dma_cap_set(DMA_PQ, plat_data->cap_mask);
+ dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
+ break;
+ }
+ }
+
+#ifdef CONFIG_MTD_PHYSMAP
+ iq8134x_flash_resource.end = iq8134x_flash_resource.start +
+ iq8134x_probe_flash_size() - 1;
+ if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
+ iop13xx_devices[plat_idx++] = &iq8134x_flash;
+ else
+ printk(KERN_ERR "%s: Failed to probe flash size\n", __func__);
+#endif
+
+ platform_add_devices(iop13xx_devices, plat_idx);
+}
+
+static int __init iop13xx_init_uart_setup(char *str)
+{
+ if (str) {
+ while (*str != '\0') {
+ switch(*str) {
+ case '0':
+ init_uart |= IOP13XX_INIT_UART_0;
+ break;
+ case '1':
+ init_uart |= IOP13XX_INIT_UART_1;
+ break;
+ case ',':
+ case '=':
+ break;
+ default:
+ PRINTK("\"iop13xx_init_uart\" malformed"
+ " at character: \'%c\'", *str);
+ *(str + 1) = '\0';
+ init_uart = IOP13XX_INIT_UART_DEFAULT;
+ }
+ str++;
+ }
+ }
+ return 1;
+}
+
+static int __init iop13xx_init_i2c_setup(char *str)
+{
+ if (str) {
+ while (*str != '\0') {
+ switch(*str) {
+ case '0':
+ init_i2c |= IOP13XX_INIT_I2C_0;
+ break;
+ case '1':
+ init_i2c |= IOP13XX_INIT_I2C_1;
+ break;
+ case '2':
+ init_i2c |= IOP13XX_INIT_I2C_2;
+ break;
+ case ',':
+ case '=':
+ break;
+ default:
+ PRINTK("\"iop13xx_init_i2c\" malformed"
+ " at character: \'%c\'", *str);
+ *(str + 1) = '\0';
+ init_i2c = IOP13XX_INIT_I2C_DEFAULT;
+ }
+ str++;
+ }
+ }
+ return 1;
+}
+
+static int __init iop13xx_init_adma_setup(char *str)
+{
+ if (str) {
+ while (*str != '\0') {
+ switch (*str) {
+ case '0':
+ init_adma |= IOP13XX_INIT_ADMA_0;
+ break;
+ case '1':
+ init_adma |= IOP13XX_INIT_ADMA_1;
+ break;
+ case '2':
+ init_adma |= IOP13XX_INIT_ADMA_2;
+ break;
+ case ',':
+ case '=':
+ break;
+ default:
+ PRINTK("\"iop13xx_init_adma\" malformed"
+ " at character: \'%c\'", *str);
+ *(str + 1) = '\0';
+ init_adma = IOP13XX_INIT_ADMA_DEFAULT;
+ }
+ str++;
+ }
+ }
+ return 1;
+}
+
+__setup("iop13xx_init_adma", iop13xx_init_adma_setup);
+__setup("iop13xx_init_uart", iop13xx_init_uart_setup);
+__setup("iop13xx_init_i2c", iop13xx_init_i2c_setup);
+
+void iop13xx_restart(enum reboot_mode mode, const char *cmd)
+{
+ /*
+ * Reset the internal bus (warning both cores are reset)
+ */
+ write_wdtcr(IOP_WDTCR_EN_ARM);
+ write_wdtcr(IOP_WDTCR_EN);
+ write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
+ write_wdtcr(0x1000);
+}