v4.19.13 snapshot.
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
new file mode 100644
index 0000000..9d87f1d
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -0,0 +1,619 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/l4f00242t03.h>
+#include <linux/regulator/machine.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+
+#include "3ds_debugboard.h"
+#include "common.h"
+#include "devices-imx31.h"
+#include "ehci.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
+
+static int mx31_3ds_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+ /*SPI0*/
+ IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
+ /* SPI 1 */
+ MX31_PIN_CSPI2_SCLK__SCLK,
+ MX31_PIN_CSPI2_MOSI__MOSI,
+ MX31_PIN_CSPI2_MISO__MISO,
+ MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI2_SS0__SS0,
+ MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
+ /* MC13783 IRQ */
+ IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
+ /* USB OTG reset */
+ IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+ MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+ MX31_PIN_USBOTG_STP__USBOTG_STP,
+ /*Keyboard*/
+ MX31_PIN_KEY_ROW0_KEY_ROW0,
+ MX31_PIN_KEY_ROW1_KEY_ROW1,
+ MX31_PIN_KEY_ROW2_KEY_ROW2,
+ MX31_PIN_KEY_COL0_KEY_COL0,
+ MX31_PIN_KEY_COL1_KEY_COL1,
+ MX31_PIN_KEY_COL2_KEY_COL2,
+ MX31_PIN_KEY_COL3_KEY_COL3,
+ /* USB Host 2 */
+ IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
+ /* USB Host2 reset */
+ IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
+ /* I2C1 */
+ MX31_PIN_I2C_CLK__I2C1_SCL,
+ MX31_PIN_I2C_DAT__I2C1_SDA,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
+ MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
+ /* Framebuffer */
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_CONTRAST__CONTRAST,
+ /* SSI */
+ MX31_PIN_STXD4__STXD4,
+ MX31_PIN_SRXD4__SRXD4,
+ MX31_PIN_SCK4__SCK4,
+ MX31_PIN_SFS4__SFS4,
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+ { /* 480x640 @ 60 Hz */
+ .name = "Epson-VGA",
+ .refresh = 60,
+ .xres = 480,
+ .yres = 640,
+ .pixclock = 41701,
+ .left_margin = 20,
+ .right_margin = 41,
+ .upper_margin = 10,
+ .lower_margin = 5,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
+ .name = "Epson-VGA",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+/* LCD */
+static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
+ .reset_gpio = IOMUX_TO_GPIO(MX31_PIN_LCS1),
+ .data_enable_gpio = IOMUX_TO_GPIO(MX31_PIN_SER_RS),
+};
+
+/*
+ * Support for SD card slot in personality board
+ */
+#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static struct gpio mx31_3ds_sdhc1_gpios[] = {
+ { MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
+ { MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
+};
+
+static int mx31_3ds_sdhc1_init(struct device *dev,
+ irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
+ ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+ if (ret) {
+ pr_warn("Unable to request the SD/MMC GPIOs.\n");
+ return ret;
+ }
+
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
+ detect_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "sdhc1-detect", data);
+ if (ret) {
+ pr_warn("Unable to request the SD/MMC card-detect IRQ.\n");
+ goto gpio_free;
+ }
+
+ return 0;
+
+gpio_free:
+ gpio_free_array(mx31_3ds_sdhc1_gpios,
+ ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+ return ret;
+}
+
+static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data);
+ gpio_free_array(mx31_3ds_sdhc1_gpios,
+ ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+}
+
+static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
+{
+ /*
+ * While the voltage stuff is done by the driver, activate the
+ * Buffer Enable Pin only if there is a card in slot to fix the card
+ * voltage issue caused by bi-directional chip TXB0108 on 3Stack.
+ * Done here because at this stage we have for sure a debounced value
+ * of the presence of the card, showed by the value of vdd.
+ * 7 == ilog2(MMC_VDD_165_195)
+ */
+ if (vdd > 7)
+ gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
+ else
+ gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .init = mx31_3ds_sdhc1_init,
+ .exit = mx31_3ds_sdhc1_exit,
+ .setpower = mx31_3ds_sdhc1_setpower,
+};
+
+/*
+ * Matrix keyboard
+ */
+
+static const uint32_t mx31_3ds_keymap[] = {
+ KEY(0, 0, KEY_UP),
+ KEY(0, 1, KEY_DOWN),
+ KEY(1, 0, KEY_RIGHT),
+ KEY(1, 1, KEY_LEFT),
+ KEY(1, 2, KEY_ENTER),
+ KEY(2, 0, KEY_F6),
+ KEY(2, 1, KEY_F8),
+ KEY(2, 2, KEY_F9),
+ KEY(2, 3, KEY_F10),
+};
+
+static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
+ .keymap = mx31_3ds_keymap,
+ .keymap_size = ARRAY_SIZE(mx31_3ds_keymap),
+};
+
+/* Regulators */
+static struct regulator_init_data pwgtx_init = {
+ .constraints = {
+ .boot_on = 1,
+ .always_on = 1,
+ },
+};
+
+static struct regulator_init_data gpo_init = {
+ .constraints = {
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_consumer_supply vmmc2_consumers[] = {
+ REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"),
+};
+
+static struct regulator_init_data vmmc2_init = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
+ .consumer_supplies = vmmc2_consumers,
+};
+
+static struct regulator_consumer_supply vmmc1_consumers[] = {
+ REGULATOR_SUPPLY("vcore", "spi0.0"),
+};
+
+static struct regulator_init_data vmmc1_init = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
+ .consumer_supplies = vmmc1_consumers,
+};
+
+static struct regulator_consumer_supply vgen_consumers[] = {
+ REGULATOR_SUPPLY("vdd", "spi0.0"),
+};
+
+static struct regulator_init_data vgen_init = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
+ .consumer_supplies = vgen_consumers,
+};
+
+static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
+ {
+ .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
+ .init_data = &pwgtx_init,
+ }, {
+ .id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */
+ .init_data = &pwgtx_init,
+ }, {
+
+ .id = MC13783_REG_GPO1, /* Turn on 1.8V */
+ .init_data = &gpo_init,
+ }, {
+ .id = MC13783_REG_GPO3, /* Turn on 3.3V */
+ .init_data = &gpo_init,
+ }, {
+ .id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
+ .init_data = &vmmc2_init,
+ }, {
+ .id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
+ .init_data = &vmmc1_init,
+ }, {
+ .id = MC13783_REG_VGEN, /* Power LCD */
+ .init_data = &vgen_init,
+ },
+};
+
+/* MC13783 */
+static struct mc13xxx_codec_platform_data mx31_3ds_codec = {
+ .dac_ssi_port = MC13783_SSI1_PORT,
+ .adc_ssi_port = MC13783_SSI1_PORT,
+};
+
+static struct mc13xxx_platform_data mc13783_pdata = {
+ .regulators = {
+ .regulators = mx31_3ds_regulators,
+ .num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
+ },
+ .codec = &mx31_3ds_codec,
+ .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | MC13XXX_USE_CODEC,
+
+};
+
+static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
+ .flags = IMX_SSI_DMA | IMX_SSI_NET,
+};
+
+/* SPI */
+static const struct spi_imx_master spi0_pdata __initconst = {
+ .num_chipselect = 3,
+};
+
+static const struct spi_imx_master spi1_pdata __initconst = {
+ .num_chipselect = 3,
+};
+
+static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 2, /* SS2 */
+ .platform_data = &mc13783_pdata,
+ /* irq number is run-time assigned */
+ .mode = SPI_CS_HIGH,
+ }, {
+ .modalias = "l4f00242t03",
+ .max_speed_hz = 5000000,
+ .bus_num = 0,
+ .chip_select = 2, /* SS2 */
+ .platform_data = &mx31_3ds_l4f00242t03_pdata,
+ },
+};
+
+/*
+ * NAND Flash
+ */
+static const struct mxc_nand_platform_data
+mx31_3ds_nand_board_info __initconst = {
+ .width = 1,
+ .hw_ecc = 1,
+#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT
+ .flash_bbt = 1,
+#endif
+};
+
+/*
+ * USB OTG
+ */
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
+#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
+
+static int mx31_3ds_usbotg_init(void)
+{
+ int err;
+
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+ err = gpio_request(USBOTG_RST_B, "otgusb-reset");
+ if (err) {
+ pr_err("Failed to request the USB OTG reset gpio\n");
+ return err;
+ }
+
+ err = gpio_direction_output(USBOTG_RST_B, 0);
+ if (err) {
+ pr_err("Failed to drive the USB OTG reset gpio\n");
+ goto usbotg_free_reset;
+ }
+
+ mdelay(1);
+ gpio_set_value(USBOTG_RST_B, 1);
+ return 0;
+
+usbotg_free_reset:
+ gpio_free(USBOTG_RST_B);
+ return err;
+}
+
+static int mx31_3ds_otg_init(struct platform_device *pdev)
+{
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
+static int mx31_3ds_host2_init(struct platform_device *pdev)
+{
+ int err;
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
+
+ err = gpio_request(USBH2_RST_B, "usbh2-reset");
+ if (err) {
+ pr_err("Failed to request the USB Host 2 reset gpio\n");
+ return err;
+ }
+
+ err = gpio_direction_output(USBH2_RST_B, 0);
+ if (err) {
+ pr_err("Failed to drive the USB Host 2 reset gpio\n");
+ goto usbotg_free_reset;
+ }
+
+ mdelay(1);
+ gpio_set_value(USBH2_RST_B, 1);
+
+ mdelay(10);
+
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+
+usbotg_free_reset:
+ gpio_free(USBH2_RST_B);
+ return err;
+}
+
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .init = mx31_3ds_otg_init,
+ .portsc = MXC_EHCI_MODE_ULPI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+ .init = mx31_3ds_host2_init,
+ .portsc = MXC_EHCI_MODE_ULPI,
+};
+
+static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+static bool otg_mode_host __initdata;
+
+static int __init mx31_3ds_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = true;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = false;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 1;
+}
+__setup("otg_mode=", mx31_3ds_otg_mode);
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
+ .bitrate = 100000,
+};
+
+static void __init mx31_3ds_init(void)
+{
+ imx31_soc_init();
+
+ /* Configure SPI1 IOMUX */
+ mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
+
+ mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
+ "mx31_3ds");
+
+ imx31_add_imx_uart0(&uart_pdata);
+ imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
+
+ imx31_add_spi_imx1(&spi1_pdata);
+
+ imx31_add_imx_keypad(&mx31_3ds_keymap_data);
+
+ imx31_add_imx2_wdt();
+ imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
+
+ imx31_add_spi_imx0(&spi0_pdata);
+ imx31_add_ipu_core();
+ imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+
+ imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
+
+ imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
+}
+
+static void __init mx31_3ds_late(void)
+{
+ mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+ spi_register_board_info(mx31_3ds_spi_devs,
+ ARRAY_SIZE(mx31_3ds_spi_devs));
+
+ mx31_3ds_usbotg_init();
+ if (otg_mode_host) {
+ otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (otg_pdata.otg)
+ imx31_add_mxc_ehci_otg(&otg_pdata);
+ }
+ usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (usbh2_pdata.otg)
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+
+ if (!otg_mode_host)
+ imx31_add_fsl_usb2_udc(&usbotg_pdata);
+
+ if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
+ printk(KERN_WARNING "Init of the debug board failed, all "
+ "devices on the debug board are unusable.\n");
+
+ imx31_add_mxc_mmc(0, &sdhc1_pdata);
+}
+
+static void __init mx31_3ds_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
+ /* Maintainer: Freescale Semiconductor, Inc. */
+ .atag_offset = 0x100,
+ .map_io = mx31_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .init_time = mx31_3ds_timer_init,
+ .init_machine = mx31_3ds_init,
+ .init_late = mx31_3ds_late,
+ .restart = mxc_restart,
+MACHINE_END