v4.19.13 snapshot.
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
new file mode 100644
index 0000000..f48d06a
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -0,0 +1,635 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include "armv7-m.dtsi"
+#include <dt-bindings/clock/stm32fx-clock.h>
+#include <dt-bindings/mfd/stm32f7-rcc.h>
+
+/ {
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_i2s_ckin: clk-i2s-ckin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ };
+ };
+
+ soc {
+ timer2: timer@40000000 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000000 0x400>;
+ interrupts = <28>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
+ status = "disabled";
+ };
+
+ timers2: timers@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@1 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
+ timer3: timer@40000400 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000400 0x400>;
+ interrupts = <29>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
+ status = "disabled";
+ };
+
+ timers3: timers@40000400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@2 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ timer4: timer@40000800 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000800 0x400>;
+ interrupts = <30>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
+ status = "disabled";
+ };
+
+ timers4: timers@40000800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@3 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
+ };
+
+ timer5: timer@40000c00 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000c00 0x400>;
+ interrupts = <50>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
+ };
+
+ timers5: timers@40000c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000C00 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@4 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+
+ timer6: timer@40001000 {
+ compatible = "st,stm32-timer";
+ reg = <0x40001000 0x400>;
+ interrupts = <54>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
+ status = "disabled";
+ };
+
+ timers6: timers@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@5 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
+ timer7: timer@40001400 {
+ compatible = "st,stm32-timer";
+ reg = <0x40001400 0x400>;
+ interrupts = <55>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+ status = "disabled";
+ };
+
+ timers7: timers@40001400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@6 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timers@40001800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timers@40001c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001C00 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers14: timers@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ rtc: rtc@40002800 {
+ compatible = "st,stm32-rtc";
+ reg = <0x40002800 0x400>;
+ clocks = <&rcc 1 CLK_RTC>;
+ clock-names = "ck_rtc";
+ assigned-clocks = <&rcc 1 CLK_RTC>;
+ assigned-clock-parents = <&rcc 1 CLK_LSE>;
+ interrupt-parent = <&exti>;
+ interrupts = <17 1>;
+ interrupt-names = "alarm";
+ st,syscfg = <&pwrcfg 0x00 0x100>;
+ status = "disabled";
+ };
+
+ usart2: serial@40004400 {
+ compatible = "st,stm32f7-uart";
+ reg = <0x40004400 0x400>;
+ interrupts = <38>;
+ clocks = <&rcc 1 CLK_USART2>;
+ status = "disabled";
+ };
+
+ usart3: serial@40004800 {
+ compatible = "st,stm32f7-uart";
+ reg = <0x40004800 0x400>;
+ interrupts = <39>;
+ clocks = <&rcc 1 CLK_USART3>;
+ status = "disabled";
+ };
+
+ usart4: serial@40004c00 {
+ compatible = "st,stm32f7-uart";
+ reg = <0x40004c00 0x400>;
+ interrupts = <52>;
+ clocks = <&rcc 1 CLK_UART4>;
+ status = "disabled";
+ };
+
+ usart5: serial@40005000 {
+ compatible = "st,stm32f7-uart";
+ reg = <0x40005000 0x400>;
+ interrupts = <53>;
+ clocks = <&rcc 1 CLK_UART5>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@40005400 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40005400 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+ clocks = <&rcc 1 CLK_I2C1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40005800 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40005800 0x400>;
+ interrupts = <33>,
+ <34>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C2)>;
+ clocks = <&rcc 1 CLK_I2C2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@40005C00 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40005C00 0x400>;
+ interrupts = <72>,
+ <73>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
+ clocks = <&rcc 1 CLK_I2C3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@40006000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40006000 0x400>;
+ interrupts = <95>,
+ <96>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C4)>;
+ clocks = <&rcc 1 CLK_I2C4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ cec: cec@40006c00 {
+ compatible = "st,stm32-cec";
+ reg = <0x40006C00 0x400>;
+ interrupts = <94>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(CEC)>, <&rcc 1 CLK_HDMI_CEC>;
+ clock-names = "cec", "hdmi-cec";
+ status = "disabled";
+ };
+
+ usart7: serial@40007800 {
+ compatible = "st,stm32f7-uart";
+ reg = <0x40007800 0x400>;
+ interrupts = <82>;
+ clocks = <&rcc 1 CLK_UART7>;
+ status = "disabled";
+ };
+
+ usart8: serial@40007c00 {
+ compatible = "st,stm32f7-uart";
+ reg = <0x40007c00 0x400>;
+ interrupts = <83>;
+ clocks = <&rcc 1 CLK_UART8>;
+ status = "disabled";
+ };
+
+ timers1: timers@40010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@0 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+ };
+
+ timers8: timers@40010400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@7 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+ };
+
+ usart1: serial@40011000 {
+ compatible = "st,stm32f7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <37>;
+ clocks = <&rcc 1 CLK_USART1>;
+ status = "disabled";
+ };
+
+ usart6: serial@40011400 {
+ compatible = "st,stm32f7-uart";
+ reg = <0x40011400 0x400>;
+ interrupts = <71>;
+ clocks = <&rcc 1 CLK_USART6>;
+ status = "disabled";
+ };
+
+ sdio2: sdio2@40011c00 {
+ compatible = "arm,pl180", "arm,primecell";
+ arm,primecell-periphid = <0x00880180>;
+ reg = <0x40011c00 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC2)>;
+ clock-names = "apb_pclk";
+ interrupts = <103>;
+ max-frequency = <48000000>;
+ status = "disabled";
+ };
+
+ sdio1: sdio1@40012c00 {
+ compatible = "arm,pl180", "arm,primecell";
+ arm,primecell-periphid = <0x00880180>;
+ reg = <0x40012c00 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC1)>;
+ clock-names = "apb_pclk";
+ interrupts = <49>;
+ max-frequency = <48000000>;
+ status = "disabled";
+ };
+
+ syscfg: system-config@40013800 {
+ compatible = "syscon";
+ reg = <0x40013800 0x400>;
+ };
+
+ exti: interrupt-controller@40013c00 {
+ compatible = "st,stm32-exti";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x40013C00 0x400>;
+ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+ };
+
+ timers9: timers@40014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@8 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <8>;
+ status = "disabled";
+ };
+ };
+
+ timers10: timers@40014400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers11: timers@40014800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ pwrcfg: power-config@40007000 {
+ compatible = "syscon";
+ reg = <0x40007000 0x400>;
+ };
+
+ crc: crc@40023000 {
+ compatible = "st,stm32f7-crc";
+ reg = <0x40023000 0x400>;
+ clocks = <&rcc 0 12>;
+ status = "disabled";
+ };
+
+ rcc: rcc@40023800 {
+ #reset-cells = <1>;
+ #clock-cells = <2>;
+ compatible = "st,stm32f746-rcc", "st,stm32-rcc";
+ reg = <0x40023800 0x400>;
+ clocks = <&clk_hse>, <&clk_i2s_ckin>;
+ st,syscfg = <&pwrcfg>;
+ assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
+ assigned-clock-rates = <1000000>;
+ };
+
+ dma1: dma@40026000 {
+ compatible = "st,stm32-dma";
+ reg = <0x40026000 0x400>;
+ interrupts = <11>,
+ <12>,
+ <13>,
+ <14>,
+ <15>,
+ <16>,
+ <17>,
+ <47>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA1)>;
+ #dma-cells = <4>;
+ status = "disabled";
+ };
+
+ dma2: dma@40026400 {
+ compatible = "st,stm32-dma";
+ reg = <0x40026400 0x400>;
+ interrupts = <56>,
+ <57>,
+ <58>,
+ <59>,
+ <60>,
+ <68>,
+ <69>,
+ <70>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA2)>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ status = "disabled";
+ };
+
+ usbotg_hs: usb@40040000 {
+ compatible = "st,stm32f7-hsotg";
+ reg = <0x40040000 0x40000>;
+ interrupts = <77>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHS)>;
+ clock-names = "otg";
+ g-rx-fifo-size = <256>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ usbotg_fs: usb@50000000 {
+ compatible = "st,stm32f4x9-fsotg";
+ reg = <0x50000000 0x40000>;
+ interrupts = <67>;
+ clocks = <&rcc 0 STM32F7_AHB2_CLOCK(OTGFS)>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+ };
+};
+
+&systick {
+ clocks = <&rcc 1 0>;
+ status = "okay";
+};