Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index 6e065d4..5a6fb66 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -22,7 +22,7 @@
* - Data sheet of the T7903, a newer but very similar ISA bus equivalent
* available from the Lucent (formerly AT&T microelectronics) home
* page.
- * - http://www.freesoft.org/Linux/DBRI/
+ * - https://www.freesoft.org/Linux/DBRI/
* - MMCODEC: Crystal Semiconductor CS4215 16 bit Multimedia Audio Codec
* Interfaces: CHI, Audio In & Out, 2 bits parallel
* Documentation: from the Crystal Semiconductor home page.
@@ -104,7 +104,7 @@
MODULE_PARM_DESC(dbri_debug, "Debug value for Sun DBRI soundcard.");
#ifdef DBRI_DEBUG
-static char *cmds[] = {
+static const char * const cmds[] = {
"WAIT", "PAUSE", "JUMP", "IIQ", "REX", "SDP", "CDP", "DTS",
"SSP", "CHI", "NT", "TE", "CDEC", "TEST", "CDM", "RESRV"
};
@@ -580,16 +580,16 @@
switch (len) {
case 32:
b = ((b & 0xffff0000) >> 16) | ((b & 0x0000ffff) << 16);
- /* fall through */
+ fallthrough;
case 16:
b = ((b & 0xff00ff00) >> 8) | ((b & 0x00ff00ff) << 8);
- /* fall through */
+ fallthrough;
case 8:
b = ((b & 0xf0f0f0f0) >> 4) | ((b & 0x0f0f0f0f) << 4);
- /* fall through */
+ fallthrough;
case 4:
b = ((b & 0xcccccccc) >> 2) | ((b & 0x33333333) << 2);
- /* fall through */
+ fallthrough;
case 2:
b = ((b & 0xaaaaaaaa) >> 1) | ((b & 0x55555555) << 1);
case 1:
@@ -620,7 +620,7 @@
while another can be executed. The scheme works by adding two WAIT commands
after each sent batch of commands. When the next batch is prepared it is
added after the WAIT commands then the WAITs are replaced with single JUMP
-command to the new batch. The the DBRI is forced to reread the last WAIT
+command to the new batch. Then the DBRI is forced to reread the last WAIT
command (replaced by the JUMP by then). If the DBRI is still executing
previous commands the request to reread the WAIT command is ignored.
@@ -2099,12 +2099,6 @@
if (ret != 0)
return ret;
- if ((ret = snd_pcm_lib_malloc_pages(substream,
- params_buffer_bytes(hw_params))) < 0) {
- printk(KERN_ERR "malloc_pages failed with %d\n", ret);
- return ret;
- }
-
/* hw_params can get called multiple times. Only map the DMA once.
*/
if (info->dvma_buffer == 0) {
@@ -2151,7 +2145,7 @@
info->pipe = -1;
}
- return snd_pcm_lib_free_pages(substream);
+ return 0;
}
static int snd_dbri_prepare(struct snd_pcm_substream *substream)
@@ -2221,7 +2215,6 @@
static const struct snd_pcm_ops snd_dbri_ops = {
.open = snd_dbri_open,
.close = snd_dbri_close,
- .ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_dbri_hw_params,
.hw_free = snd_dbri_hw_free,
.prepare = snd_dbri_prepare,
@@ -2248,9 +2241,8 @@
pcm->info_flags = 0;
strcpy(pcm->name, card->shortname);
- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
- snd_dma_continuous_data(GFP_KERNEL),
- 64 * 1024, 64 * 1024);
+ snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+ NULL, 64 * 1024, 64 * 1024);
return 0;
}
@@ -2418,7 +2410,7 @@
.private_value = (entry) | ((shift) << 8) | ((mask) << 16) | \
((invert) << 24) },
-static struct snd_kcontrol_new dbri_controls[] = {
+static const struct snd_kcontrol_new dbri_controls[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Playback Volume",