Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/sound/soc/sof/intel/hda-ipc.c b/sound/soc/sof/intel/hda-ipc.c
index 6aae6f1..acfeca4 100644
--- a/sound/soc/sof/intel/hda-ipc.c
+++ b/sound/soc/sof/intel/hda-ipc.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
//
// This file is provided under a dual BSD/GPLv2 license. When using or
// redistributing this file, you may do so under either license.
@@ -83,10 +83,12 @@
}
hdr = msg->msg_data;
- if (hdr->cmd == (SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_CTX_SAVE)) {
+ if (hdr->cmd == (SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_CTX_SAVE) ||
+ hdr->cmd == (SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_GATE)) {
/*
* memory windows are powered off before sending IPC reply,
- * so we can't read the mailbox for CTX_SAVE reply.
+ * so we can't read the mailbox for CTX_SAVE and PM_GATE
+ * replies.
*/
reply.error = 0;
reply.hdr.cmd = SOF_IPC_GLB_REPLY;
@@ -104,7 +106,9 @@
ret = reply.error;
} else {
/* reply correct size ? */
- if (reply.hdr.size != msg->reply_size) {
+ if (reply.hdr.size != msg->reply_size &&
+ /* getter payload is never known upfront */
+ ((reply.hdr.cmd & SOF_GLB_TYPE_MASK) != SOF_IPC_GLB_PROBE)) {
dev_err(sdev->dev, "error: reply expected %zu got %u bytes\n",
msg->reply_size, reply.hdr.size);
ret = -EINVAL;
@@ -121,12 +125,6 @@
}
-static bool hda_dsp_ipc_is_sof(uint32_t msg)
-{
- return (msg & (HDA_DSP_IPC_PURGE_FW | 0xf << 9)) != msg ||
- (msg & HDA_DSP_IPC_PURGE_FW) != HDA_DSP_IPC_PURGE_FW;
-}
-
/* IPC handler thread */
irqreturn_t hda_dsp_ipc_irq_thread(int irq, void *context)
{
@@ -172,17 +170,9 @@
*/
spin_lock_irq(&sdev->ipc_lock);
- /* handle immediate reply from DSP core - ignore ROM messages */
- if (hda_dsp_ipc_is_sof(msg)) {
- hda_dsp_ipc_get_reply(sdev);
- snd_sof_ipc_reply(sdev, msg);
- }
-
- /* wake up sleeper if we are loading code */
- if (sdev->code_loading) {
- sdev->code_loading = 0;
- wake_up(&sdev->waitq);
- }
+ /* handle immediate reply from DSP core */
+ hda_dsp_ipc_get_reply(sdev);
+ snd_sof_ipc_reply(sdev, msg);
/* set the done bit */
hda_dsp_ipc_dsp_done(sdev);
@@ -228,22 +218,15 @@
"nothing to do in IPC IRQ thread\n");
}
- /* re-enable IPC interrupt */
- snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
- HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC);
-
return IRQ_HANDLED;
}
-/* is this IRQ for ADSP ? - we only care about IPC here */
-irqreturn_t hda_dsp_ipc_irq_handler(int irq, void *context)
+/* Check if an IPC IRQ occurred */
+bool hda_dsp_check_ipc_irq(struct snd_sof_dev *sdev)
{
- struct snd_sof_dev *sdev = context;
- int ret = IRQ_NONE;
+ bool ret = false;
u32 irq_status;
- spin_lock(&sdev->hw_lock);
-
/* store status */
irq_status = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIS);
dev_vdbg(sdev->dev, "irq handler: irq_status:0x%x\n", irq_status);
@@ -253,16 +236,10 @@
goto out;
/* IPC message ? */
- if (irq_status & HDA_DSP_ADSPIS_IPC) {
- /* disable IPC interrupt */
- snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
- HDA_DSP_REG_ADSPIC,
- HDA_DSP_ADSPIC_IPC, 0);
- ret = IRQ_WAKE_THREAD;
- }
+ if (irq_status & HDA_DSP_ADSPIS_IPC)
+ ret = true;
out:
- spin_unlock(&sdev->hw_lock);
return ret;
}