Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index f215218..7389302 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -64,6 +64,9 @@
if (local->fif_pspoll)
new_flags |= FIF_PSPOLL;
+ if (local->rx_mcast_action_reg)
+ new_flags |= FIF_MCAST_ACTION;
+
spin_lock_bh(&local->filter_lock);
changed_flags = local->filter_flags ^ new_flags;
@@ -104,13 +107,15 @@
chandef.chan = local->tmp_channel;
chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
chandef.center_freq1 = chandef.chan->center_freq;
+ chandef.freq1_offset = chandef.chan->freq_offset;
} else
chandef = local->_oper_chandef;
WARN(!cfg80211_chandef_valid(&chandef),
- "control:%d MHz width:%d center: %d/%d MHz",
- chandef.chan->center_freq, chandef.width,
- chandef.center_freq1, chandef.center_freq2);
+ "control:%d.%03d MHz width:%d center: %d.%03d/%d MHz",
+ chandef.chan->center_freq, chandef.chan->freq_offset,
+ chandef.width, chandef.center_freq1, chandef.freq1_offset,
+ chandef.center_freq2);
if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
@@ -146,6 +151,8 @@
continue;
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
continue;
+ if (sdata->vif.bss_conf.txpower == INT_MIN)
+ continue;
power = min(power, sdata->vif.bss_conf.txpower);
}
rcu_read_unlock();
@@ -416,7 +423,20 @@
},
[NL80211_IFTYPE_STATION] = {
.tx = 0xffff,
+ /*
+ * To support Pre Association Security Negotiation (PASN) while
+ * already associated to one AP, allow user space to register to
+ * Rx authentication frames, so that the user space logic would
+ * be able to receive/handle authentication frames from a
+ * different AP as part of PASN.
+ * It is expected that user space would intelligently register
+ * for Rx authentication frames, i.e., only when PASN is used
+ * and configure a match filter only for PASN authentication
+ * algorithm, as otherwise the MLME functionality of mac80211
+ * would be broken.
+ */
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_AUTH >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
},
[NL80211_IFTYPE_AP] = {
@@ -561,7 +581,7 @@
WIPHY_FLAG_REPORTS_OBSS |
WIPHY_FLAG_OFFCHAN_TX;
- if (ops->remain_on_channel)
+ if (!use_chanctx || ops->remain_on_channel)
wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
wiphy->features |= NL80211_FEATURE_SK_TX_STATUS |
@@ -574,6 +594,12 @@
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_FILS_STA);
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211);
+ wiphy_ext_feature_set(wiphy,
+ NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH);
+ wiphy_ext_feature_set(wiphy,
+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS);
+ wiphy_ext_feature_set(wiphy,
+ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ);
if (!ops->hw_scan) {
wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
@@ -667,8 +693,14 @@
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
INIT_LIST_HEAD(&local->active_txqs[i]);
spin_lock_init(&local->active_txq_lock[i]);
+ local->aql_txq_limit_low[i] = IEEE80211_DEFAULT_AQL_TXQ_LIMIT_L;
+ local->aql_txq_limit_high[i] =
+ IEEE80211_DEFAULT_AQL_TXQ_LIMIT_H;
}
+
local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX;
+ local->aql_threshold = IEEE80211_AQL_THRESHOLD;
+ atomic_set(&local->aql_total_pending_airtime, 0);
INIT_LIST_HEAD(&local->chanctx_list);
mutex_init(&local->chanctx_mtx);
@@ -866,7 +898,6 @@
enum nl80211_band band;
int channels, max_bitrates;
bool supp_ht, supp_vht, supp_he;
- netdev_features_t feature_whitelist;
struct cfg80211_chan_def dflt_chandef = {};
if (ieee80211_hw_check(hw, QUEUE_CONTROL) &&
@@ -925,10 +956,7 @@
}
/* Only HW csum features are currently compatible with mac80211 */
- feature_whitelist = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
- NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA |
- NETIF_F_GSO_SOFTWARE | NETIF_F_RXCSUM;
- if (WARN_ON(hw->netdev_features & ~feature_whitelist))
+ if (WARN_ON(hw->netdev_features & ~MAC80211_SUPPORTED_FEATURES))
return -EINVAL;
if (hw->max_report_rates == 0)
@@ -986,6 +1014,11 @@
if (!supp_he)
supp_he = !!ieee80211_get_he_sta_cap(sband);
+ /* HT, VHT, HE require QoS, thus >= 4 queues */
+ if (WARN_ON(local->hw.queues < IEEE80211_NUM_ACS &&
+ (supp_ht || supp_vht || supp_he)))
+ return -EINVAL;
+
if (!sband->ht_cap.ht_supported)
continue;
@@ -1070,6 +1103,10 @@
NL80211_EXT_FEATURE_EXT_KEY_ID);
}
+ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_ADHOC))
+ wiphy_ext_feature_set(local->hw.wiphy,
+ NL80211_EXT_FEATURE_DEL_IBSS_STA);
+
/*
* Calculate scan IE length -- we need this to alloc
* memory and to subtract from the driver limit. It
@@ -1145,7 +1182,7 @@
WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT;
}
- local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CSA_COUNTERS_NUM;
+ local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CNTDWN_COUNTERS_NUM;
/*
* We use the number of queues for feature tests (QoS, HT) internally
@@ -1186,10 +1223,7 @@
if (!local->hw.weight_multiplier)
local->hw.weight_multiplier = 1;
- result = ieee80211_wep_init(local);
- if (result < 0)
- wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
- result);
+ ieee80211_wep_init(local);
local->hw.conf.flags = IEEE80211_CONF_IDLE;