Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/kernel/entry/Makefile b/kernel/entry/Makefile
new file mode 100644
index 0000000..34c8a3f
--- /dev/null
+++ b/kernel/entry/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Prevent the noinstr section from being pestered by sanitizer and other goodies
+# as long as these things cannot be disabled per function.
+KASAN_SANITIZE := n
+UBSAN_SANITIZE := n
+KCOV_INSTRUMENT := n
+
+CFLAGS_REMOVE_common.o = -fstack-protector -fstack-protector-strong
+CFLAGS_common.o += -fno-stack-protector
+
+obj-$(CONFIG_GENERIC_ENTRY) += common.o
+obj-$(CONFIG_KVM_XFER_TO_GUEST_WORK) += kvm.o
diff --git a/kernel/entry/common.c b/kernel/entry/common.c
new file mode 100644
index 0000000..e289e67
--- /dev/null
+++ b/kernel/entry/common.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/context_tracking.h>
+#include <linux/entry-common.h>
+#include <linux/livepatch.h>
+#include <linux/audit.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+/**
+ * enter_from_user_mode - Establish state when coming from user mode
+ *
+ * Syscall/interrupt entry disables interrupts, but user mode is traced as
+ * interrupts enabled. Also with NO_HZ_FULL RCU might be idle.
+ *
+ * 1) Tell lockdep that interrupts are disabled
+ * 2) Invoke context tracking if enabled to reactivate RCU
+ * 3) Trace interrupts off state
+ */
+static __always_inline void enter_from_user_mode(struct pt_regs *regs)
+{
+ arch_check_user_regs(regs);
+ lockdep_hardirqs_off(CALLER_ADDR0);
+
+ CT_WARN_ON(ct_state() != CONTEXT_USER);
+ user_exit_irqoff();
+
+ instrumentation_begin();
+ trace_hardirqs_off_finish();
+ instrumentation_end();
+}
+
+static inline void syscall_enter_audit(struct pt_regs *regs, long syscall)
+{
+ if (unlikely(audit_context())) {
+ unsigned long args[6];
+
+ syscall_get_arguments(current, regs, args);
+ audit_syscall_entry(syscall, args[0], args[1], args[2], args[3]);
+ }
+}
+
+static long syscall_trace_enter(struct pt_regs *regs, long syscall,
+ unsigned long ti_work)
+{
+ long ret = 0;
+
+ /* Handle ptrace */
+ if (ti_work & (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU)) {
+ ret = arch_syscall_enter_tracehook(regs);
+ if (ret || (ti_work & _TIF_SYSCALL_EMU))
+ return -1L;
+ }
+
+ /* Do seccomp after ptrace, to catch any tracer changes. */
+ if (ti_work & _TIF_SECCOMP) {
+ ret = __secure_computing(NULL);
+ if (ret == -1L)
+ return ret;
+ }
+
+ /* Either of the above might have changed the syscall number */
+ syscall = syscall_get_nr(current, regs);
+
+ if (unlikely(ti_work & _TIF_SYSCALL_TRACEPOINT))
+ trace_sys_enter(regs, syscall);
+
+ syscall_enter_audit(regs, syscall);
+
+ return ret ? : syscall;
+}
+
+static __always_inline long
+__syscall_enter_from_user_work(struct pt_regs *regs, long syscall)
+{
+ unsigned long ti_work;
+
+ ti_work = READ_ONCE(current_thread_info()->flags);
+ if (ti_work & SYSCALL_ENTER_WORK)
+ syscall = syscall_trace_enter(regs, syscall, ti_work);
+
+ return syscall;
+}
+
+long syscall_enter_from_user_mode_work(struct pt_regs *regs, long syscall)
+{
+ return __syscall_enter_from_user_work(regs, syscall);
+}
+
+noinstr long syscall_enter_from_user_mode(struct pt_regs *regs, long syscall)
+{
+ long ret;
+
+ enter_from_user_mode(regs);
+
+ instrumentation_begin();
+ local_irq_enable();
+ ret = __syscall_enter_from_user_work(regs, syscall);
+ instrumentation_end();
+
+ return ret;
+}
+
+noinstr void syscall_enter_from_user_mode_prepare(struct pt_regs *regs)
+{
+ enter_from_user_mode(regs);
+ instrumentation_begin();
+ local_irq_enable();
+ instrumentation_end();
+}
+
+/**
+ * exit_to_user_mode - Fixup state when exiting to user mode
+ *
+ * Syscall/interupt exit enables interrupts, but the kernel state is
+ * interrupts disabled when this is invoked. Also tell RCU about it.
+ *
+ * 1) Trace interrupts on state
+ * 2) Invoke context tracking if enabled to adjust RCU state
+ * 3) Invoke architecture specific last minute exit code, e.g. speculation
+ * mitigations, etc.
+ * 4) Tell lockdep that interrupts are enabled
+ */
+static __always_inline void exit_to_user_mode(void)
+{
+ instrumentation_begin();
+ trace_hardirqs_on_prepare();
+ lockdep_hardirqs_on_prepare(CALLER_ADDR0);
+ instrumentation_end();
+
+ user_enter_irqoff();
+ arch_exit_to_user_mode();
+ lockdep_hardirqs_on(CALLER_ADDR0);
+}
+
+/* Workaround to allow gradual conversion of architecture code */
+void __weak arch_do_signal(struct pt_regs *regs) { }
+
+static unsigned long exit_to_user_mode_loop(struct pt_regs *regs,
+ unsigned long ti_work)
+{
+ /*
+ * Before returning to user space ensure that all pending work
+ * items have been completed.
+ */
+ while (ti_work & EXIT_TO_USER_MODE_WORK) {
+
+ local_irq_enable_exit_to_user(ti_work);
+
+ if (ti_work & _TIF_NEED_RESCHED)
+ schedule();
+
+ if (ti_work & _TIF_UPROBE)
+ uprobe_notify_resume(regs);
+
+ if (ti_work & _TIF_PATCH_PENDING)
+ klp_update_patch_state(current);
+
+ if (ti_work & _TIF_SIGPENDING)
+ arch_do_signal(regs);
+
+ if (ti_work & _TIF_NOTIFY_RESUME) {
+ tracehook_notify_resume(regs);
+ rseq_handle_notify_resume(NULL, regs);
+ }
+
+ /* Architecture specific TIF work */
+ arch_exit_to_user_mode_work(regs, ti_work);
+
+ /*
+ * Disable interrupts and reevaluate the work flags as they
+ * might have changed while interrupts and preemption was
+ * enabled above.
+ */
+ local_irq_disable_exit_to_user();
+ ti_work = READ_ONCE(current_thread_info()->flags);
+ }
+
+ /* Return the latest work state for arch_exit_to_user_mode() */
+ return ti_work;
+}
+
+static void exit_to_user_mode_prepare(struct pt_regs *regs)
+{
+ unsigned long ti_work = READ_ONCE(current_thread_info()->flags);
+
+ lockdep_assert_irqs_disabled();
+
+ if (unlikely(ti_work & EXIT_TO_USER_MODE_WORK))
+ ti_work = exit_to_user_mode_loop(regs, ti_work);
+
+ arch_exit_to_user_mode_prepare(regs, ti_work);
+
+ /* Ensure that the address limit is intact and no locks are held */
+ addr_limit_user_check();
+ lockdep_assert_irqs_disabled();
+ lockdep_sys_exit();
+}
+
+#ifndef _TIF_SINGLESTEP
+static inline bool report_single_step(unsigned long ti_work)
+{
+ return false;
+}
+#else
+/*
+ * If TIF_SYSCALL_EMU is set, then the only reason to report is when
+ * TIF_SINGLESTEP is set (i.e. PTRACE_SYSEMU_SINGLESTEP). This syscall
+ * instruction has been already reported in syscall_enter_from_user_mode().
+ */
+#define SYSEMU_STEP (_TIF_SINGLESTEP | _TIF_SYSCALL_EMU)
+
+static inline bool report_single_step(unsigned long ti_work)
+{
+ return (ti_work & SYSEMU_STEP) == _TIF_SINGLESTEP;
+}
+#endif
+
+static void syscall_exit_work(struct pt_regs *regs, unsigned long ti_work)
+{
+ bool step;
+
+ audit_syscall_exit(regs);
+
+ if (ti_work & _TIF_SYSCALL_TRACEPOINT)
+ trace_sys_exit(regs, syscall_get_return_value(current, regs));
+
+ step = report_single_step(ti_work);
+ if (step || ti_work & _TIF_SYSCALL_TRACE)
+ arch_syscall_exit_tracehook(regs, step);
+}
+
+/*
+ * Syscall specific exit to user mode preparation. Runs with interrupts
+ * enabled.
+ */
+static void syscall_exit_to_user_mode_prepare(struct pt_regs *regs)
+{
+ u32 cached_flags = READ_ONCE(current_thread_info()->flags);
+ unsigned long nr = syscall_get_nr(current, regs);
+
+ CT_WARN_ON(ct_state() != CONTEXT_KERNEL);
+
+ if (IS_ENABLED(CONFIG_PROVE_LOCKING)) {
+ if (WARN(irqs_disabled(), "syscall %lu left IRQs disabled", nr))
+ local_irq_enable();
+ }
+
+ rseq_syscall(regs);
+
+ /*
+ * Do one-time syscall specific work. If these work items are
+ * enabled, we want to run them exactly once per syscall exit with
+ * interrupts enabled.
+ */
+ if (unlikely(cached_flags & SYSCALL_EXIT_WORK))
+ syscall_exit_work(regs, cached_flags);
+}
+
+__visible noinstr void syscall_exit_to_user_mode(struct pt_regs *regs)
+{
+ instrumentation_begin();
+ syscall_exit_to_user_mode_prepare(regs);
+ local_irq_disable_exit_to_user();
+ exit_to_user_mode_prepare(regs);
+ instrumentation_end();
+ exit_to_user_mode();
+}
+
+noinstr void irqentry_enter_from_user_mode(struct pt_regs *regs)
+{
+ enter_from_user_mode(regs);
+}
+
+noinstr void irqentry_exit_to_user_mode(struct pt_regs *regs)
+{
+ instrumentation_begin();
+ exit_to_user_mode_prepare(regs);
+ instrumentation_end();
+ exit_to_user_mode();
+}
+
+noinstr irqentry_state_t irqentry_enter(struct pt_regs *regs)
+{
+ irqentry_state_t ret = {
+ .exit_rcu = false,
+ };
+
+ if (user_mode(regs)) {
+ irqentry_enter_from_user_mode(regs);
+ return ret;
+ }
+
+ /*
+ * If this entry hit the idle task invoke rcu_irq_enter() whether
+ * RCU is watching or not.
+ *
+ * Interupts can nest when the first interrupt invokes softirq
+ * processing on return which enables interrupts.
+ *
+ * Scheduler ticks in the idle task can mark quiescent state and
+ * terminate a grace period, if and only if the timer interrupt is
+ * not nested into another interrupt.
+ *
+ * Checking for rcu_is_watching() here would prevent the nesting
+ * interrupt to invoke rcu_irq_enter(). If that nested interrupt is
+ * the tick then rcu_flavor_sched_clock_irq() would wrongfully
+ * assume that it is the first interupt and eventually claim
+ * quiescient state and end grace periods prematurely.
+ *
+ * Unconditionally invoke rcu_irq_enter() so RCU state stays
+ * consistent.
+ *
+ * TINY_RCU does not support EQS, so let the compiler eliminate
+ * this part when enabled.
+ */
+ if (!IS_ENABLED(CONFIG_TINY_RCU) && is_idle_task(current)) {
+ /*
+ * If RCU is not watching then the same careful
+ * sequence vs. lockdep and tracing is required
+ * as in irq_enter_from_user_mode().
+ */
+ lockdep_hardirqs_off(CALLER_ADDR0);
+ rcu_irq_enter();
+ instrumentation_begin();
+ trace_hardirqs_off_finish();
+ instrumentation_end();
+
+ ret.exit_rcu = true;
+ return ret;
+ }
+
+ /*
+ * If RCU is watching then RCU only wants to check whether it needs
+ * to restart the tick in NOHZ mode. rcu_irq_enter_check_tick()
+ * already contains a warning when RCU is not watching, so no point
+ * in having another one here.
+ */
+ lockdep_hardirqs_off(CALLER_ADDR0);
+ instrumentation_begin();
+ rcu_irq_enter_check_tick();
+ trace_hardirqs_off_finish();
+ instrumentation_end();
+
+ return ret;
+}
+
+void irqentry_exit_cond_resched(void)
+{
+ if (!preempt_count()) {
+ /* Sanity check RCU and thread stack */
+ rcu_irq_exit_check_preempt();
+ if (IS_ENABLED(CONFIG_DEBUG_ENTRY))
+ WARN_ON_ONCE(!on_thread_stack());
+ if (need_resched())
+ preempt_schedule_irq();
+ }
+}
+
+noinstr void irqentry_exit(struct pt_regs *regs, irqentry_state_t state)
+{
+ lockdep_assert_irqs_disabled();
+
+ /* Check whether this returns to user mode */
+ if (user_mode(regs)) {
+ irqentry_exit_to_user_mode(regs);
+ } else if (!regs_irqs_disabled(regs)) {
+ /*
+ * If RCU was not watching on entry this needs to be done
+ * carefully and needs the same ordering of lockdep/tracing
+ * and RCU as the return to user mode path.
+ */
+ if (state.exit_rcu) {
+ instrumentation_begin();
+ /* Tell the tracer that IRET will enable interrupts */
+ trace_hardirqs_on_prepare();
+ lockdep_hardirqs_on_prepare(CALLER_ADDR0);
+ instrumentation_end();
+ rcu_irq_exit();
+ lockdep_hardirqs_on(CALLER_ADDR0);
+ return;
+ }
+
+ instrumentation_begin();
+ if (IS_ENABLED(CONFIG_PREEMPTION))
+ irqentry_exit_cond_resched();
+ /* Covers both tracing and lockdep */
+ trace_hardirqs_on();
+ instrumentation_end();
+ } else {
+ /*
+ * IRQ flags state is correct already. Just tell RCU if it
+ * was not watching on entry.
+ */
+ if (state.exit_rcu)
+ rcu_irq_exit();
+ }
+}
+
+irqentry_state_t noinstr irqentry_nmi_enter(struct pt_regs *regs)
+{
+ irqentry_state_t irq_state;
+
+ irq_state.lockdep = lockdep_hardirqs_enabled();
+
+ __nmi_enter();
+ lockdep_hardirqs_off(CALLER_ADDR0);
+ lockdep_hardirq_enter();
+ rcu_nmi_enter();
+
+ instrumentation_begin();
+ trace_hardirqs_off_finish();
+ ftrace_nmi_enter();
+ instrumentation_end();
+
+ return irq_state;
+}
+
+void noinstr irqentry_nmi_exit(struct pt_regs *regs, irqentry_state_t irq_state)
+{
+ instrumentation_begin();
+ ftrace_nmi_exit();
+ if (irq_state.lockdep) {
+ trace_hardirqs_on_prepare();
+ lockdep_hardirqs_on_prepare(CALLER_ADDR0);
+ }
+ instrumentation_end();
+
+ rcu_nmi_exit();
+ lockdep_hardirq_exit();
+ if (irq_state.lockdep)
+ lockdep_hardirqs_on(CALLER_ADDR0);
+ __nmi_exit();
+}
diff --git a/kernel/entry/kvm.c b/kernel/entry/kvm.c
new file mode 100644
index 0000000..2a3139d
--- /dev/null
+++ b/kernel/entry/kvm.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/entry-kvm.h>
+#include <linux/kvm_host.h>
+
+static int xfer_to_guest_mode_work(struct kvm_vcpu *vcpu, unsigned long ti_work)
+{
+ do {
+ int ret;
+
+ if (ti_work & _TIF_SIGPENDING) {
+ kvm_handle_signal_exit(vcpu);
+ return -EINTR;
+ }
+
+ if (ti_work & _TIF_NEED_RESCHED)
+ schedule();
+
+ if (ti_work & _TIF_NOTIFY_RESUME) {
+ tracehook_notify_resume(NULL);
+ rseq_handle_notify_resume(NULL, NULL);
+ }
+
+ ret = arch_xfer_to_guest_mode_handle_work(vcpu, ti_work);
+ if (ret)
+ return ret;
+
+ ti_work = READ_ONCE(current_thread_info()->flags);
+ } while (ti_work & XFER_TO_GUEST_MODE_WORK || need_resched());
+ return 0;
+}
+
+int xfer_to_guest_mode_handle_work(struct kvm_vcpu *vcpu)
+{
+ unsigned long ti_work;
+
+ /*
+ * This is invoked from the outer guest loop with interrupts and
+ * preemption enabled.
+ *
+ * KVM invokes xfer_to_guest_mode_work_pending() with interrupts
+ * disabled in the inner loop before going into guest mode. No need
+ * to disable interrupts here.
+ */
+ ti_work = READ_ONCE(current_thread_info()->flags);
+ if (!(ti_work & XFER_TO_GUEST_MODE_WORK))
+ return 0;
+
+ return xfer_to_guest_mode_work(vcpu, ti_work);
+}
+EXPORT_SYMBOL_GPL(xfer_to_guest_mode_handle_work);