Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 4ea558b..7b78c4b 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -32,9 +32,9 @@
SPI_MEM_OP_NO_DUMMY, \
SPI_MEM_OP_NO_DATA)
-#define SPINAND_READID_OP(ndummy, buf, len) \
+#define SPINAND_READID_OP(naddr, ndummy, buf, len) \
SPI_MEM_OP(SPI_MEM_OP_CMD(0x9f, 1), \
- SPI_MEM_OP_NO_ADDR, \
+ SPI_MEM_OP_ADDR(naddr, 0, 1), \
SPI_MEM_OP_DUMMY(ndummy, 1), \
SPI_MEM_OP_DATA_IN(len, buf, 1))
@@ -176,37 +176,46 @@
* @data: buffer containing the id bytes. Currently 4 bytes large, but can
* be extended if required
* @len: ID length
- *
- * struct_spinand_id->data contains all bytes returned after a READ_ID command,
- * including dummy bytes if the chip does not emit ID bytes right after the
- * READ_ID command. The responsibility to extract real ID bytes is left to
- * struct_manufacurer_ops->detect().
*/
struct spinand_id {
u8 data[SPINAND_MAX_ID_LEN];
int len;
};
+enum spinand_readid_method {
+ SPINAND_READID_METHOD_OPCODE,
+ SPINAND_READID_METHOD_OPCODE_ADDR,
+ SPINAND_READID_METHOD_OPCODE_DUMMY,
+};
+
+/**
+ * struct spinand_devid - SPI NAND device id structure
+ * @id: device id of current chip
+ * @len: number of bytes in device id
+ * @method: method to read chip id
+ * There are 3 possible variants:
+ * SPINAND_READID_METHOD_OPCODE: chip id is returned immediately
+ * after read_id opcode.
+ * SPINAND_READID_METHOD_OPCODE_ADDR: chip id is returned after
+ * read_id opcode + 1-byte address.
+ * SPINAND_READID_METHOD_OPCODE_DUMMY: chip id is returned after
+ * read_id opcode + 1 dummy byte.
+ */
+struct spinand_devid {
+ const u8 *id;
+ const u8 len;
+ const enum spinand_readid_method method;
+};
+
/**
* struct manufacurer_ops - SPI NAND manufacturer specific operations
- * @detect: detect a SPI NAND device. Every time a SPI NAND device is probed
- * the core calls the struct_manufacurer_ops->detect() hook of each
- * registered manufacturer until one of them return 1. Note that
- * the first thing to check in this hook is that the manufacturer ID
- * in struct_spinand_device->id matches the manufacturer whose
- * ->detect() hook has been called. Should return 1 if there's a
- * match, 0 if the manufacturer ID does not match and a negative
- * error code otherwise. When true is returned, the core assumes
- * that properties of the NAND chip (spinand->base.memorg and
- * spinand->base.eccreq) have been filled
* @init: initialize a SPI NAND device
* @cleanup: cleanup a SPI NAND device
*
* Each SPI NAND manufacturer driver should implement this interface so that
- * NAND chips coming from this vendor can be detected and initialized properly.
+ * NAND chips coming from this vendor can be initialized properly.
*/
struct spinand_manufacturer_ops {
- int (*detect)(struct spinand_device *spinand);
int (*init)(struct spinand_device *spinand);
void (*cleanup)(struct spinand_device *spinand);
};
@@ -215,11 +224,16 @@
* struct spinand_manufacturer - SPI NAND manufacturer instance
* @id: manufacturer ID
* @name: manufacturer name
+ * @devid_len: number of bytes in device ID
+ * @chips: supported SPI NANDs under current manufacturer
+ * @nchips: number of SPI NANDs available in chips array
* @ops: manufacturer operations
*/
struct spinand_manufacturer {
u8 id;
char *name;
+ const struct spinand_info *chips;
+ const size_t nchips;
const struct spinand_manufacturer_ops *ops;
};
@@ -270,6 +284,7 @@
};
#define SPINAND_HAS_QE_BIT BIT(0)
+#define SPINAND_HAS_CR_FEAT_BIT BIT(1)
/**
* struct spinand_info - Structure used to describe SPI NAND chips
@@ -291,10 +306,10 @@
*/
struct spinand_info {
const char *model;
- u16 devid;
+ struct spinand_devid devid;
u32 flags;
struct nand_memory_organization memorg;
- struct nand_ecc_req eccreq;
+ struct nand_ecc_props eccreq;
struct spinand_ecc_info eccinfo;
struct {
const struct spinand_op_variants *read_cache;
@@ -305,6 +320,13 @@
unsigned int target);
};
+#define SPINAND_ID(__method, ...) \
+ { \
+ .id = (const u8[]){ __VA_ARGS__ }, \
+ .len = sizeof((u8[]){ __VA_ARGS__ }), \
+ .method = __method, \
+ }
+
#define SPINAND_INFO_OP_VARIANTS(__read, __write, __update) \
{ \
.read_cache = __read, \
@@ -451,9 +473,10 @@
nanddev_set_of_node(&spinand->base, np);
}
-int spinand_match_and_init(struct spinand_device *dev,
+int spinand_match_and_init(struct spinand_device *spinand,
const struct spinand_info *table,
- unsigned int table_size, u16 devid);
+ unsigned int table_size,
+ enum spinand_readid_method rdid_method);
int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
int spinand_select_target(struct spinand_device *spinand, unsigned int target);