Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index 8494846..2ee0174 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -43,8 +43,6 @@
#include <linux/watchdog.h> /* For watchdog specific items */
#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
-#include <uapi/linux/sched/types.h> /* For struct sched_param */
-
#include "watchdog_core.h"
#include "watchdog_pretimeout.h"
@@ -275,15 +273,18 @@
set_bit(_WDOG_KEEPALIVE, &wd_data->status);
started_at = ktime_get();
- if (watchdog_hw_running(wdd) && wdd->ops->ping)
- err = wdd->ops->ping(wdd);
- else
+ if (watchdog_hw_running(wdd) && wdd->ops->ping) {
+ err = __watchdog_ping(wdd);
+ if (err == 0)
+ set_bit(WDOG_ACTIVE, &wdd->status);
+ } else {
err = wdd->ops->start(wdd);
- if (err == 0) {
- set_bit(WDOG_ACTIVE, &wdd->status);
- wd_data->last_keepalive = started_at;
- wd_data->last_hw_keepalive = started_at;
- watchdog_update_worker(wdd);
+ if (err == 0) {
+ set_bit(WDOG_ACTIVE, &wdd->status);
+ wd_data->last_keepalive = started_at;
+ wd_data->last_hw_keepalive = started_at;
+ watchdog_update_worker(wdd);
+ }
}
return err;
@@ -452,7 +453,26 @@
return sprintf(buf, "%d\n", !!test_bit(WDOG_NO_WAY_OUT, &wdd->status));
}
-static DEVICE_ATTR_RO(nowayout);
+
+static ssize_t nowayout_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct watchdog_device *wdd = dev_get_drvdata(dev);
+ unsigned int value;
+ int ret;
+
+ ret = kstrtouint(buf, 0, &value);
+ if (ret)
+ return ret;
+ if (value > 1)
+ return -EINVAL;
+ /* nowayout cannot be disabled once set */
+ if (test_bit(WDOG_NO_WAY_OUT, &wdd->status) && !value)
+ return -EPERM;
+ watchdog_set_nowayout(wdd, value);
+ return len;
+}
+static DEVICE_ATTR_RW(nowayout);
static ssize_t status_show(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -568,7 +588,7 @@
static umode_t wdt_is_visible(struct kobject *kobj, struct attribute *attr,
int n)
{
- struct device *dev = container_of(kobj, struct device, kobj);
+ struct device *dev = kobj_to_dev(kobj);
struct watchdog_device *wdd = dev_get_drvdata(dev);
umode_t mode = attr->mode;
@@ -757,7 +777,7 @@
err = watchdog_ping(wdd);
if (err < 0)
break;
- /* fall through */
+ fallthrough;
case WDIOC_GETTIMEOUT:
/* timeout == 0 means that we don't know the timeout */
if (wdd->timeout == 0) {
@@ -897,7 +917,7 @@
* or if WDIOF_MAGICCLOSE is not set. If nowayout was set then
* watchdog_stop will fail.
*/
- if (!test_bit(WDOG_ACTIVE, &wdd->status))
+ if (!watchdog_active(wdd))
err = 0;
else if (test_and_clear_bit(_WDOG_ALLOW_RELEASE, &wd_data->status) ||
!(wdd->info->options & WDIOF_MAGICCLOSE))
@@ -933,6 +953,7 @@
.owner = THIS_MODULE,
.write = watchdog_write,
.unlocked_ioctl = watchdog_ioctl,
+ .compat_ioctl = compat_ptr_ioctl,
.open = watchdog_open,
.release = watchdog_release,
};
@@ -1118,6 +1139,39 @@
}
/*
+ * watchdog_set_last_hw_keepalive: set last HW keepalive time for watchdog
+ * @wdd: watchdog device
+ * @last_ping_ms: time since last HW heartbeat
+ *
+ * Adjusts the last known HW keepalive time for a watchdog timer.
+ * This is needed if the watchdog is already running when the probe
+ * function is called, and it can't be pinged immediately. This
+ * function must be called immediately after watchdog registration,
+ * and min_hw_heartbeat_ms must be set for this to be useful.
+ */
+int watchdog_set_last_hw_keepalive(struct watchdog_device *wdd,
+ unsigned int last_ping_ms)
+{
+ struct watchdog_core_data *wd_data;
+ ktime_t now;
+
+ if (!wdd)
+ return -EINVAL;
+
+ wd_data = wdd->wd_data;
+
+ now = ktime_get();
+
+ wd_data->last_hw_keepalive = ktime_sub(now, ms_to_ktime(last_ping_ms));
+
+ if (watchdog_hw_running(wdd) && handle_boot_enabled)
+ return __watchdog_ping(wdd);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(watchdog_set_last_hw_keepalive);
+
+/*
* watchdog_dev_init: init dev part of watchdog core
*
* Allocate a range of chardev nodes to use for watchdog devices
@@ -1126,14 +1180,13 @@
int __init watchdog_dev_init(void)
{
int err;
- struct sched_param param = {.sched_priority = MAX_RT_PRIO - 1,};
watchdog_kworker = kthread_create_worker(0, "watchdogd");
if (IS_ERR(watchdog_kworker)) {
pr_err("Failed to create watchdog kworker\n");
return PTR_ERR(watchdog_kworker);
}
- sched_setscheduler(watchdog_kworker->task, SCHED_FIFO, ¶m);
+ sched_set_fifo(watchdog_kworker->task);
err = class_register(&watchdog_class);
if (err < 0) {