Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 56066d9..48923cd 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -22,7 +22,6 @@
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
-#include <linux/pm_runtime.h>
#define ULITE_NAME "ttyUL"
#define ULITE_MAJOR 204
@@ -33,7 +32,7 @@
* Register definitions
*
* For register details see datasheet:
- * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf
+ * https://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf
*/
#define ULITE_RX 0x00
@@ -55,7 +54,6 @@
#define ULITE_CONTROL_RST_TX 0x01
#define ULITE_CONTROL_RST_RX 0x02
#define ULITE_CONTROL_IE 0x10
-#define UART_AUTOSUSPEND_TIMEOUT 3000
/* Static pointer to console port */
#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
@@ -65,7 +63,6 @@
struct uartlite_data {
const struct uartlite_reg_ops *reg_ops;
struct clk *clk;
- struct uart_driver *ulite_uart_driver;
};
struct uartlite_reg_ops {
@@ -393,12 +390,12 @@
static void ulite_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- if (!state) {
- pm_runtime_get_sync(port->dev);
- } else {
- pm_runtime_mark_last_busy(port->dev);
- pm_runtime_put_autosuspend(port->dev);
- }
+ struct uartlite_data *pdata = port->private_data;
+
+ if (!state)
+ clk_enable(pdata->clk);
+ else
+ clk_disable(pdata->clk);
}
#ifdef CONFIG_CONSOLE_POLL
@@ -618,7 +615,7 @@
*
* Returns: 0 on success, <0 otherwise
*/
-static int ulite_assign(struct device *dev, int id, u32 base, int irq,
+static int ulite_assign(struct device *dev, int id, phys_addr_t base, int irq,
struct uartlite_data *pdata)
{
struct uart_port *port;
@@ -682,9 +679,7 @@
int rc = 0;
if (port) {
- struct uartlite_data *pdata = port->private_data;
-
- rc = uart_remove_one_port(pdata->ulite_uart_driver, port);
+ rc = uart_remove_one_port(&ulite_uart_driver, port);
dev_set_drvdata(dev, NULL);
port->mapbase = 0;
}
@@ -702,11 +697,8 @@
{
struct uart_port *port = dev_get_drvdata(dev);
- if (port) {
- struct uartlite_data *pdata = port->private_data;
-
- uart_suspend_port(pdata->ulite_uart_driver, port);
- }
+ if (port)
+ uart_suspend_port(&ulite_uart_driver, port);
return 0;
}
@@ -721,41 +713,17 @@
{
struct uart_port *port = dev_get_drvdata(dev);
- if (port) {
- struct uartlite_data *pdata = port->private_data;
-
- uart_resume_port(pdata->ulite_uart_driver, port);
- }
+ if (port)
+ uart_resume_port(&ulite_uart_driver, port);
return 0;
}
-static int __maybe_unused ulite_runtime_suspend(struct device *dev)
-{
- struct uart_port *port = dev_get_drvdata(dev);
- struct uartlite_data *pdata = port->private_data;
-
- clk_disable(pdata->clk);
- return 0;
-};
-
-static int __maybe_unused ulite_runtime_resume(struct device *dev)
-{
- struct uart_port *port = dev_get_drvdata(dev);
- struct uartlite_data *pdata = port->private_data;
-
- clk_enable(pdata->clk);
- return 0;
-}
/* ---------------------------------------------------------------------
* Platform bus binding
*/
-static const struct dev_pm_ops ulite_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(ulite_suspend, ulite_resume)
- SET_RUNTIME_PM_OPS(ulite_runtime_suspend,
- ulite_runtime_resume, NULL)
-};
+static SIMPLE_DEV_PM_OPS(ulite_pm_ops, ulite_suspend, ulite_resume);
#if defined(CONFIG_OF)
/* Match table for of_platform binding */
@@ -780,22 +748,6 @@
if (prop)
id = be32_to_cpup(prop);
#endif
- if (id < 0) {
- /* Look for a serialN alias */
- id = of_alias_get_id(pdev->dev.of_node, "serial");
- if (id < 0)
- id = 0;
- }
-
- if (!ulite_uart_driver.state) {
- dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
- ret = uart_register_driver(&ulite_uart_driver);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to register driver\n");
- return ret;
- }
- }
-
pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data),
GFP_KERNEL);
if (!pdata)
@@ -821,22 +773,24 @@
pdata->clk = NULL;
}
- pdata->ulite_uart_driver = &ulite_uart_driver;
ret = clk_prepare_enable(pdata->clk);
if (ret) {
dev_err(&pdev->dev, "Failed to prepare clock\n");
return ret;
}
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
+ if (!ulite_uart_driver.state) {
+ dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
+ ret = uart_register_driver(&ulite_uart_driver);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register driver\n");
+ return ret;
+ }
+ }
ret = ulite_assign(&pdev->dev, id, res->start, irq, pdata);
- pm_runtime_mark_last_busy(&pdev->dev);
- pm_runtime_put_autosuspend(&pdev->dev);
+ clk_disable(pdata->clk);
return ret;
}
@@ -845,14 +799,9 @@
{
struct uart_port *port = dev_get_drvdata(&pdev->dev);
struct uartlite_data *pdata = port->private_data;
- int rc;
- clk_unprepare(pdata->clk);
- rc = ulite_release(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
- pm_runtime_set_suspended(&pdev->dev);
- pm_runtime_dont_use_autosuspend(&pdev->dev);
- return rc;
+ clk_disable_unprepare(pdata->clk);
+ return ulite_release(&pdev->dev);
}
/* work with hotplug and coldplug */