Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 8a4be34..4a80f04 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -91,6 +91,7 @@
#define MSPI_MSPI_STATUS 0x020
#define MSPI_CPTQP 0x024
#define MSPI_SPCR3 0x028
+#define MSPI_REV 0x02c
#define MSPI_TXRAM 0x040
#define MSPI_RXRAM 0x0c0
#define MSPI_CDRAM 0x140
@@ -106,14 +107,22 @@
#define MSPI_SPCR2_SPE BIT(6)
#define MSPI_SPCR2_CONT_AFTER_CMD BIT(7)
+#define MSPI_SPCR3_FASTBR BIT(0)
+#define MSPI_SPCR3_FASTDT BIT(1)
+#define MSPI_SPCR3_SYSCLKSEL_MASK GENMASK(11, 10)
+#define MSPI_SPCR3_SYSCLKSEL_27 (MSPI_SPCR3_SYSCLKSEL_MASK & \
+ ~(BIT(10) | BIT(11)))
+#define MSPI_SPCR3_SYSCLKSEL_108 (MSPI_SPCR3_SYSCLKSEL_MASK & \
+ BIT(11))
+
#define MSPI_MSPI_STATUS_SPIF BIT(0)
#define INTR_BASE_BIT_SHIFT 0x02
#define INTR_COUNT 0x07
#define NUM_CHIPSELECT 4
-#define QSPI_SPBR_MIN 8U
#define QSPI_SPBR_MAX 255U
+#define MSPI_BASE_FREQ 27000000UL
#define OPCODE_DIOR 0xBB
#define OPCODE_QIOR 0xEB
@@ -217,6 +226,9 @@
struct bcm_qspi_dev_id *dev_ids;
struct completion mspi_done;
struct completion bspi_done;
+ u8 mspi_maj_rev;
+ u8 mspi_min_rev;
+ bool mspi_spcr3_sysclk;
};
static inline bool has_bspi(struct bcm_qspi *qspi)
@@ -224,6 +236,36 @@
return qspi->bspi_mode;
}
+/* hardware supports spcr3 and fast baud-rate */
+static inline bool bcm_qspi_has_fastbr(struct bcm_qspi *qspi)
+{
+ if (!has_bspi(qspi) &&
+ ((qspi->mspi_maj_rev >= 1) &&
+ (qspi->mspi_min_rev >= 5)))
+ return true;
+
+ return false;
+}
+
+/* hardware supports sys clk 108Mhz */
+static inline bool bcm_qspi_has_sysclk_108(struct bcm_qspi *qspi)
+{
+ if (!has_bspi(qspi) && (qspi->mspi_spcr3_sysclk ||
+ ((qspi->mspi_maj_rev >= 1) &&
+ (qspi->mspi_min_rev >= 6))))
+ return true;
+
+ return false;
+}
+
+static inline int bcm_qspi_spbr_min(struct bcm_qspi *qspi)
+{
+ if (bcm_qspi_has_fastbr(qspi))
+ return 1;
+ else
+ return 8;
+}
+
/* Read qspi controller register*/
static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
unsigned int offset)
@@ -509,7 +551,7 @@
u32 rd = 0;
u32 wr = 0;
- if (qspi->base[CHIP_SELECT]) {
+ if (cs >= 0 && qspi->base[CHIP_SELECT]) {
rd = bcm_qspi_read(qspi, CHIP_SELECT, 0);
wr = (rd & ~0xff) | (1 << cs);
if (rd == wr)
@@ -531,16 +573,39 @@
if (xp->speed_hz)
spbr = qspi->base_clk / (2 * xp->speed_hz);
- spcr = clamp_val(spbr, QSPI_SPBR_MIN, QSPI_SPBR_MAX);
+ spcr = clamp_val(spbr, bcm_qspi_spbr_min(qspi), QSPI_SPBR_MAX);
bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr);
- spcr = MSPI_MASTER_BIT;
+ if (!qspi->mspi_maj_rev)
+ /* legacy controller */
+ spcr = MSPI_MASTER_BIT;
+ else
+ spcr = 0;
+
/* for 16 bit the data should be zero */
if (xp->bits_per_word != 16)
spcr |= xp->bits_per_word << 2;
spcr |= xp->mode & 3;
+
bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr);
+ if (bcm_qspi_has_fastbr(qspi)) {
+ spcr = 0;
+
+ /* enable fastbr */
+ spcr |= MSPI_SPCR3_FASTBR;
+
+ if (bcm_qspi_has_sysclk_108(qspi)) {
+ /* SYSCLK_108 */
+ spcr |= MSPI_SPCR3_SYSCLKSEL_108;
+ qspi->base_clk = MSPI_BASE_FREQ * 4;
+ /* Change spbr as we changed sysclk */
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, 4);
+ }
+
+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR3, spcr);
+ }
+
qspi->last_parms = *xp;
}
@@ -612,19 +677,15 @@
if (qt->trans->cs_change &&
(flags & TRANS_STATUS_BREAK_CS_CHANGE))
ret |= TRANS_STATUS_BREAK_CS_CHANGE;
- if (ret)
- goto done;
- dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
if (bcm_qspi_mspi_transfer_is_last(qspi, qt))
- ret = TRANS_STATUS_BREAK_EOM;
+ ret |= TRANS_STATUS_BREAK_EOM;
else
- ret = TRANS_STATUS_BREAK_NO_BYTES;
+ ret |= TRANS_STATUS_BREAK_NO_BYTES;
qt->trans = NULL;
}
-done:
dev_dbg(&qspi->pdev->dev, "trans %p len %d byte %d ret %x\n",
qt->trans, qt->trans ? qt->trans->len : 0, qt->byte, ret);
return ret;
@@ -771,7 +832,16 @@
bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, slot - 1);
- if (tstatus & TRANS_STATUS_BREAK_DESELECT) {
+ /*
+ * case 1) EOM =1, cs_change =0: SSb inactive
+ * case 2) EOM =1, cs_change =1: SSb stay active
+ * case 3) EOM =0, cs_change =0: SSb stay active
+ * case 4) EOM =0, cs_change =1: SSb inactive
+ */
+ if (((tstatus & TRANS_STATUS_BREAK_DESELECT)
+ == TRANS_STATUS_BREAK_CS_CHANGE) ||
+ ((tstatus & TRANS_STATUS_BREAK_DESELECT)
+ == TRANS_STATUS_BREAK_EOM)) {
mspi_cdram = read_cdram_slot(qspi, slot - 1) &
~MSPI_CDRAM_CONT_BIT;
write_cdram_slot(qspi, slot - 1, mspi_cdram);
@@ -803,7 +873,8 @@
return -EIO;
from = op->addr.val;
- bcm_qspi_chip_select(qspi, spi->chip_select);
+ if (!spi->cs_gpiod)
+ bcm_qspi_chip_select(qspi, spi->chip_select);
bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
/*
@@ -882,7 +953,8 @@
int slots;
unsigned long timeo = msecs_to_jiffies(100);
- bcm_qspi_chip_select(qspi, spi->chip_select);
+ if (!spi->cs_gpiod)
+ bcm_qspi_chip_select(qspi, spi->chip_select);
qspi->trans_pos.trans = trans;
qspi->trans_pos.byte = 0;
@@ -1178,18 +1250,58 @@
static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
{
+ u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS);
+
bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0);
if (has_bspi(qspi))
bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
+ /* clear interrupt */
+ bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status & ~1);
}
static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
.exec_op = bcm_qspi_exec_mem_op,
};
+struct bcm_qspi_data {
+ bool has_mspi_rev;
+ bool has_spcr3_sysclk;
+};
+
+static const struct bcm_qspi_data bcm_qspi_no_rev_data = {
+ .has_mspi_rev = false,
+ .has_spcr3_sysclk = false,
+};
+
+static const struct bcm_qspi_data bcm_qspi_rev_data = {
+ .has_mspi_rev = true,
+ .has_spcr3_sysclk = false,
+};
+
+static const struct bcm_qspi_data bcm_qspi_spcr3_data = {
+ .has_mspi_rev = true,
+ .has_spcr3_sysclk = true,
+};
+
static const struct of_device_id bcm_qspi_of_match[] = {
- { .compatible = "brcm,spi-bcm-qspi" },
+ {
+ .compatible = "brcm,spi-bcm7445-qspi",
+ .data = &bcm_qspi_rev_data,
+
+ },
+ {
+ .compatible = "brcm,spi-bcm-qspi",
+ .data = &bcm_qspi_no_rev_data,
+ },
+ {
+ .compatible = "brcm,spi-bcm7216-qspi",
+ .data = &bcm_qspi_spcr3_data,
+ },
+ {
+ .compatible = "brcm,spi-bcm7278-qspi",
+ .data = &bcm_qspi_spcr3_data,
+ },
{},
};
MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
@@ -1197,12 +1309,15 @@
int bcm_qspi_probe(struct platform_device *pdev,
struct bcm_qspi_soc_intc *soc_intc)
{
+ const struct of_device_id *of_id = NULL;
+ const struct bcm_qspi_data *data;
struct device *dev = &pdev->dev;
struct bcm_qspi *qspi;
struct spi_master *master;
struct resource *res;
int irq, ret = 0, num_ints = 0;
u32 val;
+ u32 rev = 0;
const char *name = NULL;
int num_irqs = ARRAY_SIZE(qspi_irq_tab);
@@ -1210,9 +1325,12 @@
if (!dev->of_node)
return -ENODEV;
- if (!of_match_node(bcm_qspi_of_match, dev->of_node))
+ of_id = of_match_node(bcm_qspi_of_match, dev->of_node);
+ if (!of_id)
return -ENODEV;
+ data = of_id->data;
+
master = devm_spi_alloc_master(dev, sizeof(struct bcm_qspi));
if (!master) {
dev_err(dev, "error allocating spi_master\n");
@@ -1239,6 +1357,7 @@
master->cleanup = bcm_qspi_cleanup;
master->dev.of_node = dev->of_node;
master->num_chipselect = NUM_CHIPSELECT;
+ master->use_gpio_descriptors = true;
qspi->big_endian = of_device_is_big_endian(dev->of_node);
@@ -1282,12 +1401,53 @@
if (!qspi->dev_ids)
return -ENOMEM;
+ /*
+ * Some SoCs integrate spi controller (e.g., its interrupt bits)
+ * in specific ways
+ */
+ if (soc_intc) {
+ qspi->soc_intc = soc_intc;
+ soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true);
+ } else {
+ qspi->soc_intc = NULL;
+ }
+
+ if (qspi->clk) {
+ ret = clk_prepare_enable(qspi->clk);
+ if (ret) {
+ dev_err(dev, "failed to prepare clock\n");
+ goto qspi_probe_err;
+ }
+ qspi->base_clk = clk_get_rate(qspi->clk);
+ } else {
+ qspi->base_clk = MSPI_BASE_FREQ;
+ }
+
+ if (data->has_mspi_rev) {
+ rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
+ /* some older revs do not have a MSPI_REV register */
+ if ((rev & 0xff) == 0xff)
+ rev = 0;
+ }
+
+ qspi->mspi_maj_rev = (rev >> 4) & 0xf;
+ qspi->mspi_min_rev = rev & 0xf;
+ qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk;
+
+ qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
+
+ /*
+ * On SW resets it is possible to have the mask still enabled
+ * Need to disable the mask and clear the status while we init
+ */
+ bcm_qspi_hw_uninit(qspi);
+
for (val = 0; val < num_irqs; val++) {
irq = -1;
name = qspi_irq_tab[val].irq_name;
if (qspi_irq_tab[val].irq_source == SINGLE_L2) {
/* get the l2 interrupts */
- irq = platform_get_irq_byname(pdev, name);
+ irq = platform_get_irq_byname_optional(pdev, name);
} else if (!num_ints && soc_intc) {
/* all mspi, bspi intrs muxed to one L1 intr */
irq = platform_get_irq(pdev, 0);
@@ -1300,7 +1460,7 @@
&qspi->dev_ids[val]);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ %s not found\n", name);
- goto qspi_probe_err;
+ goto qspi_unprepare_err;
}
qspi->dev_ids[val].dev = qspi;
@@ -1315,29 +1475,9 @@
if (!num_ints) {
dev_err(&pdev->dev, "no IRQs registered, cannot init driver\n");
ret = -EINVAL;
- goto qspi_probe_err;
+ goto qspi_unprepare_err;
}
- /*
- * Some SoCs integrate spi controller (e.g., its interrupt bits)
- * in specific ways
- */
- if (soc_intc) {
- qspi->soc_intc = soc_intc;
- soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true);
- } else {
- qspi->soc_intc = NULL;
- }
-
- ret = clk_prepare_enable(qspi->clk);
- if (ret) {
- dev_err(dev, "failed to prepare clock\n");
- goto qspi_probe_err;
- }
-
- qspi->base_clk = clk_get_rate(qspi->clk);
- qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2);
-
bcm_qspi_hw_init(qspi);
init_completion(&qspi->mspi_done);
init_completion(&qspi->bspi_done);
@@ -1359,6 +1499,7 @@
qspi_reg_err:
bcm_qspi_hw_uninit(qspi);
+qspi_unprepare_err:
clk_disable_unprepare(qspi->clk);
qspi_probe_err:
kfree(qspi->dev_ids);
@@ -1391,7 +1532,7 @@
bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
spi_master_suspend(qspi->master);
- clk_disable(qspi->clk);
+ clk_disable_unprepare(qspi->clk);
bcm_qspi_hw_uninit(qspi);
return 0;
@@ -1409,7 +1550,7 @@
qspi->soc_intc->bcm_qspi_int_set(qspi->soc_intc, MSPI_DONE,
true);
- ret = clk_enable(qspi->clk);
+ ret = clk_prepare_enable(qspi->clk);
if (!ret)
spi_master_resume(qspi->master);