Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/platform/mips/rs780e-acpi.c b/drivers/platform/mips/rs780e-acpi.c
new file mode 100644
index 0000000..bb0e8ae
--- /dev/null
+++ b/drivers/platform/mips/rs780e-acpi.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static unsigned long acpi_iobase;
+
+#define ACPI_PM_EVT_BLK (acpi_iobase + 0x00) /* 4 bytes */
+#define ACPI_PM_CNT_BLK (acpi_iobase + 0x04) /* 2 bytes */
+#define ACPI_PMA_CNT_BLK (acpi_iobase + 0x0F) /* 1 byte */
+#define ACPI_PM_TMR_BLK (acpi_iobase + 0x18) /* 4 bytes */
+#define ACPI_GPE0_BLK (acpi_iobase + 0x10) /* 8 bytes */
+#define ACPI_END (acpi_iobase + 0x80)
+
+#define PM_INDEX 0xCD6
+#define PM_DATA 0xCD7
+#define PM2_INDEX 0xCD0
+#define PM2_DATA 0xCD1
+
+static void pmio_write_index(u16 index, u8 reg, u8 value)
+{
+ outb(reg, index);
+ outb(value, index + 1);
+}
+
+static u8 pmio_read_index(u16 index, u8 reg)
+{
+ outb(reg, index);
+ return inb(index + 1);
+}
+
+void pm_iowrite(u8 reg, u8 value)
+{
+ pmio_write_index(PM_INDEX, reg, value);
+}
+EXPORT_SYMBOL(pm_iowrite);
+
+u8 pm_ioread(u8 reg)
+{
+ return pmio_read_index(PM_INDEX, reg);
+}
+EXPORT_SYMBOL(pm_ioread);
+
+void pm2_iowrite(u8 reg, u8 value)
+{
+ pmio_write_index(PM2_INDEX, reg, value);
+}
+EXPORT_SYMBOL(pm2_iowrite);
+
+u8 pm2_ioread(u8 reg)
+{
+ return pmio_read_index(PM2_INDEX, reg);
+}
+EXPORT_SYMBOL(pm2_ioread);
+
+static void acpi_hw_clear_status(void)
+{
+ u16 value;
+
+ /* PMStatus: Clear WakeStatus/PwrBtnStatus */
+ value = inw(ACPI_PM_EVT_BLK);
+ value |= (1 << 8 | 1 << 15);
+ outw(value, ACPI_PM_EVT_BLK);
+
+ /* GPEStatus: Clear all generated events */
+ outl(inl(ACPI_GPE0_BLK), ACPI_GPE0_BLK);
+}
+
+static void acpi_registers_setup(void)
+{
+ u32 value;
+
+ /* PM Status Base */
+ pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xff);
+ pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8);
+
+ /* PM Control Base */
+ pm_iowrite(0x22, ACPI_PM_CNT_BLK & 0xff);
+ pm_iowrite(0x23, ACPI_PM_CNT_BLK >> 8);
+
+ /* GPM Base */
+ pm_iowrite(0x28, ACPI_GPE0_BLK & 0xff);
+ pm_iowrite(0x29, ACPI_GPE0_BLK >> 8);
+
+ /* ACPI End */
+ pm_iowrite(0x2e, ACPI_END & 0xff);
+ pm_iowrite(0x2f, ACPI_END >> 8);
+
+ /* IO Decode: When AcpiDecodeEnable set, South-Bridge uses the contents
+ * of the PM registers at index 0x20~0x2B to decode ACPI I/O address. */
+ pm_iowrite(0x0e, 1 << 3);
+
+ /* SCI_EN set */
+ outw(1, ACPI_PM_CNT_BLK);
+
+ /* Enable to generate SCI */
+ pm_iowrite(0x10, pm_ioread(0x10) | 1);
+
+ /* GPM3/GPM9 enable */
+ value = inl(ACPI_GPE0_BLK + 4);
+ outl(value | (1 << 14) | (1 << 22), ACPI_GPE0_BLK + 4);
+
+ /* Set GPM9 as input */
+ pm_iowrite(0x8d, pm_ioread(0x8d) & (~(1 << 1)));
+
+ /* Set GPM9 as non-output */
+ pm_iowrite(0x94, pm_ioread(0x94) | (1 << 3));
+
+ /* GPM3 config ACPI trigger SCIOUT */
+ pm_iowrite(0x33, pm_ioread(0x33) & (~(3 << 4)));
+
+ /* GPM9 config ACPI trigger SCIOUT */
+ pm_iowrite(0x3d, pm_ioread(0x3d) & (~(3 << 2)));
+
+ /* GPM3 config falling edge trigger */
+ pm_iowrite(0x37, pm_ioread(0x37) & (~(1 << 6)));
+
+ /* No wait for STPGNT# in ACPI Sx state */
+ pm_iowrite(0x7c, pm_ioread(0x7c) | (1 << 6));
+
+ /* Set GPM3 pull-down enable */
+ value = pm2_ioread(0xf6);
+ value |= ((1 << 7) | (1 << 3));
+ pm2_iowrite(0xf6, value);
+
+ /* Set GPM9 pull-down enable */
+ value = pm2_ioread(0xf8);
+ value |= ((1 << 5) | (1 << 1));
+ pm2_iowrite(0xf8, value);
+}
+
+static int rs780e_acpi_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!res)
+ return -ENODEV;
+
+ /* SCI interrupt need acpi space, allocate here */
+ if (!request_region(res->start, resource_size(res), "acpi")) {
+ pr_err("RS780E-ACPI: Failed to request IO Region\n");
+ return -EBUSY;
+ }
+
+ acpi_iobase = res->start;
+
+ acpi_registers_setup();
+ acpi_hw_clear_status();
+
+ return 0;
+}
+
+static const struct of_device_id rs780e_acpi_match[] = {
+ { .compatible = "loongson,rs780e-acpi" },
+ {},
+};
+
+static struct platform_driver rs780e_acpi_driver = {
+ .probe = rs780e_acpi_probe,
+ .driver = {
+ .name = "RS780E-ACPI",
+ .of_match_table = rs780e_acpi_match,
+ },
+};
+builtin_platform_driver(rs780e_acpi_driver);